EN 15357:2011
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Solid recovered fuels - Terminology, definitions and descriptions
Published date
09-03-2011
Publisher
Superseded date
22-01-2021
Superseded by
Sorry this product is not available in your region.
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
Annex A (informative) - List of terms defined
by EN ISO 9000
Bibliography
This European Standard defines terms and definitions concerned in all standardisation work within the scope of CEN/TC 343, i.e. terms used in the field of production and trade of solid recovered fuels that are prepared from non-hazardous waste.NOTESolid biofuels are covered by the scope of CEN/TC 335.The embedding of the scope within the waste/solid recovered fuels field is given in Figure 1. Figure 1 - Linkage between selected terms in the field of waste, recovered fuels and conversion to end-use energyDefinitions in other standards with a scope different from the scope of this European Standard can be different from the definitions in this European Standard.
| Committee |
CEN/TC 343
|
| DevelopmentNote |
Supersedes CEN/TS 15357. (03/2011)
|
| DocumentType |
Standard
|
| PublisherName |
Comite Europeen de Normalisation
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| Standards | Relationship |
| NEN EN 15357 : 2011 | Identical |
| DIN EN 15357:2011-05 | Identical |
| PN EN 15357 : 2011 | Identical |
| BS EN 15357:2011 | Identical |
| I.S. EN 15357:2011 | Identical |
| NS EN 15357 : 2011 | Identical |
| NF EN 15357 : 2011 | Identical |
| NBN EN 15357 : 2011 | Identical |
| ONORM EN 15357 : 2011 | Identical |
| UNE-EN 15357:2012 | Identical |
| DIN EN 15411:2011-11 | Solid recovered fuels - Methods for the determination of the content of trace elements (As, Ba, Be, Cd, Co, Cr, Cu, Hg, Mo, Mn, Ni, Pb, Sb, Se, Tl, V and Zn) |
| I.S. EN 15413:2011 | SOLID RECOVERED FUELS - METHODS FOR THE PREPARATION OF THE TEST SAMPLE FROM THE LABORATORY SAMPLE |
| I.S. EN 15415-3:2012 | SOLID RECOVERED FUELS - DETERMINATION OF PARTICLE SIZE DISTRIBUTION - PART 3: METHOD BY IMAGE ANALYSIS FOR LARGE DIMENSION PARTICLES |
| BS EN 15415-2:2012 | Solid recovered fuels. Determination of particle size distribution Maximum projected length method (manual) for large dimension particles |
| NF EN 15408 : 2011 | SOLID RECOVERED FUELS - METHODS FOR THE DETERMINATION OF SULPHUR (S), CHLORINE (CL), FLUORINE (F) AND BROMINE (BR) CONTENT |
| NF EN 15359 : 2011 | SOLID RECOVERED FUELS - SPECIFICATIONS AND CLASSES |
| I.S. EN 15410:2011 | SOLID RECOVERED FUELS - METHODS FOR THE DETERMINATION OF THE CONTENT OF MAJOR ELEMENTS (AL, CA, FE, K, MG, NA, P, SI, TI) |
| I.S. EN 15358:2011 | SOLID RECOVERED FUELS - QUALITY MANAGEMENT SYSTEMS - PARTICULAR REQUIREMENTS FOR THEIR APPLICATION TO THE PRODUCTION OF SOLID RECOVERED FUELS |
| I.S. EN 15359:2011 | SOLID RECOVERED FUELS - SPECIFICATIONS AND CLASSES |
| I.S. EN 15403:2011 | SOLID RECOVERED FUELS - DETERMINATION OF ASH CONTENT |
| EN 15414-3:2011 | Solid recovered fuels - Determination of moisture content using the oven dry method - Part 3: Moisture in general analysis sample |
| EN 15410:2011 | Solid recovered fuels - Methods for the determination of the content of major elements (Al, Ca, Fe, K, Mg, Na, P, Si, Ti) |
| EN 15411:2011 | Solid recovered fuels - Methods for the determination of the content of trace elements (As, Ba, Be, Cd, Co, Cr, Cu, Hg, Mo, Mn, Ni, Pb, Sb, Se, Tl, V and Zn) |
| EN 15413:2011 | Solid recovered fuels - Methods for the preparation of the test sample from the laboratory sample |
| EN 15415-1:2011 | Solid recovered fuels - Determination of particle size distribution - Part 1: Screen method for small dimension particles |
| EN 15402:2011 | Solid recovered fuels - Determination of the content of volatile matter |
| EN 15358:2011 | Solid recovered fuels - Quality management systems - Particular requirements for their application to the production of solid recovered fuels |
| BS EN 15440:2011 | Solid recovered fuels. Methods for the determination of biomass content |
| DIN EN 15414-3:2011-05 | Solid recovered fuels - Determination of moisture content using the oven dry method - Part 3: Moisture in general analysis sample |
| DIN EN 15410:2011-11 | Solid recovered fuels - Method for the determination of the content of major elements (Al, Ca, Fe, K, Mg, Na, P, Si, Ti) |
| I.S. EN 15415-2:2012 | SOLID RECOVERED FUELS - DETERMINATION OF PARTICLE SIZE DISTRIBUTION - PART 2: MAXIMUM PROJECTED LENGTH METHOD (MANUAL) FOR LARGE DIMENSION PARTICLES |
| BS EN 15411:2011 | Solid recovered fuels. Methods for the determination of the content of trace elements (As, Ba, Be, Cd, Co, Cr, Cu, Hg, Mo, Mn, Ni, Pb, Sb, Se, Tl, V and Zn) |
| I.S. EN 15442:2011 | SOLID RECOVERED FUELS - METHODS FOR SAMPLING |
| BS EN 15410:2011 | Solid recovered fuels. Methods for the determination of the content of major elements (Al, Ca, Fe, K, Mg, Na, P, Si, Ti) |
| NF EN 15403 : 2011 | SOLID RECOVERED FUELS - DETERMINATION OF ASH CONTENT |
| DIN EN 15440:2011-05 | Solid recovered fuels - Methods for the determination of biomass content |
| BS EN 15403:2011 | Solid recovered fuels. Determination of ash content |
| NF EN 15411 : 2011 | SOLID RECOVERED FUELS - METHODS FOR THE DETERMINATION OF THE CONTENT OF TRACE ELEMENTS (AS, BA, BE, CD, CO, CR, CU, HG, MO, MN, NI, PB, SB, SE, TL, V AND ZN) |
| BS EN 15590:2011 | Solid recovered fuels. Determination of the current rate of aerobic microbial activity using the real dynamic respiration index |
| I.S. EN 15402:2011 | SOLID RECOVERED FUELS - DETERMINATION OF THE CONTENT OF VOLATILE MATTER |
| I.S. EN 15590:2011 | SOLID RECOVERED FUELS - DETERMINATION OF THE CURRENT RATE OF AEROBIC MICROBIAL ACTIVITY USING THE REAL DYNAMIC RESPIRATION INDEX |
| NF EN 15590 : 2011 | SOLID RECOVERED FUELS - DETERMINATION OF THE CURRENT RATE OF AEROBIC MICROBIAL ACTIVITY USING THE REAL DYNAMIC RESPIRATION INDEX |
| EN 15407:2011 | Solid recovered fuels - Methods for the determination of carbon (C), hydrogen (H) and nitrogen (N) content |
| EN 15440 : 2011 COR 2011 | SOLID RECOVERED FUELS - METHODS FOR THE DETERMINATION OF BIOMASS CONTENT |
| DIN EN 15442:2011-05 | Solid recovered fuels - Methods for sampling; German version EN 15442:2011 |
| BS EN 15358:2011 | Solid recovered fuels. Quality management systems. Particular requirements for their application to the production of solid recovered fuels |
| DIN EN 15415-3:2012-06 | Solid recovered fuels - Determination of particle size distribution - Part 3: Method by image analysis for large dimension particles |
| BS EN 15442:2011 | Solid recovered fuels. Methods for sampling |
| BS EN 15415-3:2012 | Solid recovered fuels. Determination of particle size distribution Method by image analysis for large dimension particles |
| NF EN 15442 : 2011 | SOLID RECOVERED FUELS - METHODS FOR SAMPLING |
| DIN EN 15408:2011-05 | Solid recovered fuels - Methods for the determination of sulphur (S), chlorine (Cl), fluorine (F) and bromine (Br) content |
| DIN EN 15443:2011-05 | Solid recovered fuels - Methods for the preparation of the laboratory sample |
| DIN EN 15359:2012-01 | Solid recovered fuels - Specifications and classes |
| I.S. EN 15443:2011 | SOLID RECOVERED FUELS - METHODS FOR THE PREPARATION OF THE LABORATORY SAMPLE |
| BS EN 15400:2011 | Solid recovered fuels. Determination of calorific value |
| I.S. EN 15414-3:2011 | SOLID RECOVERED FUELS - DETERMINATION OF MOISTURE CONTENT USING THE OVEN DRY METHOD - PART 3: MOISTURE IN GENERAL ANALYSIS SAMPLE |
| DIN EN 15415-1:2011-11 | Solid recovered fuels - Determination of particle size distribution - Part 1: Screen method for small dimension particles |
| EN 15400:2011 | Solid recovered fuels - Determination of calorific value |
| NF EN 15400 : 2011 | SOLID RECOVERED FUELS - DETERMINATION OF CALORIFIC VALUE |
| NF EN 15414-3 : 2011 | SOLID RECOVERED FUELS - DETERMINATION OF MOISTURE CONTENT USING THE OVEN DRY METHOD - PART 3: MOISTURE IN GENERAL ANALYSIS SAMPLE |
| NF EN 15415-1 : 2011 | SOLID RECOVERED FUELS - DETERMINATION OF PARTICLE SIZE DISTRIBUTION - PART 1: SCREEN METHOD FOR SMALL DIMENSION PARTICLES |
| NF EN 15402 : 2011 | SOLID RECOVERED FUELS - DETERMINATION OF THE CONTENT OF VOLATILE MATTER |
| NF EN 15407 : 2011 | SOLID RECOVERED FUELS - METHODS FOR THE DETERMINATION OF CARBON (C), HYDROGEN (H) AND NITROGEN (N) CONTENT |
| EN 15442:2011 | Solid recovered fuels - Methods for sampling |
| DIN EN 15400:2011-05 | Solid recovered fuels - Determination of calorific value |
| BS EN 15413:2011 | Solid recovered fuels. Methods for the preparation of the test sample from the laboratory sample |
| DIN EN 15403:2011-05 | Solid recovered fuels - Determination of ash content |
| BS EN 15407:2011 | Solid recovered fuels. Methods for the determination of carbon (C), hydrogen (H) and nitrogen (N) content |
| DIN EN 15407:2011-05 | Solid recovered fuels - Methods for the determination of carbon (C), hydrogen (H) and nitrogen (N) content |
| BS EN 15359:2011 | Solid recovered fuels. Specifications and classes |
| NF EN 15440 : 2011 | SOLID RECOVERED FUELS - METHOD FOR THE DETERMINATION OF BIOMASS CONTENT |
| NF EN 15413 : 2011 | SOLID RECOVERED FUELS - METHODS FOR THE PREPARATION OF THE TEST SAMPLE FROM THE LABORATORY SAMPLE |
| I.S. EN 15411:2011 | SOLID RECOVERED FUELS - METHODS FOR THE DETERMINATION OF THE CONTENT OF TRACE ELEMENTS (AS, BA, BE, CD, CO, CR, CU, HG, MO, MN, NI, PB, SB, SE, TL, V AND ZN) |
| I.S. EN 15440:2011 | SOLID RECOVERED FUELS - METHODS FOR THE DETERMINATION OF BIOMASS CONTENT |
| I.S. EN 15407:2011 | SOLID RECOVERED FUELS - METHODS FOR THE DETERMINATION OF CARBON (C), HYDROGEN (H) AND NITROGEN (N) CONTENT |
| I.S. EN 15400:2011 | SOLID RECOVERED FUELS - DETERMINATION OF CALORIFIC VALUE |
| EN 15415-2:2012 | Solid recovered fuels - Determination of particle size distribution - Part 2: Maximum projected length method (manual) for large dimension particles |
| EN 15415-3:2012 | Solid recovered fuels - Determination of particle size distribution - Part 3: Method by image analysis for large dimension particles |
| DIN EN 15402:2011-05 | Solid recovered fuels - Determination of the content of volatile matter |
| BS EN 15415-1:2011 | Solid recovered fuels. Determination of particle size distribution Screen method for small dimension particles |
| BS EN 15414-3:2011 | Solid recovered fuels. Determination of moisture content using the oven dry method Moisture in general analysis sample |
| DIN EN 15590:2011-11 | Solid recovered fuels - Determination of the current rate of aerobic microbial activity using the real dynamic respiration index |
| BS EN 15408:2011 | Solid recovered fuels. Methods for the determination of sulphur (S), chlorine (Cl), fluorine (F) and bromine (Br) content |
| BS EN 15402:2011 | Solid recovered fuels. Determination of the content of volatile matter |
| NF EN 15358 : 2011 | SOLID RECOVERED FUELS - QUALITY MANAGEMENT SYSTEMS - PARTICULAR REQUIREMENTS FOR THEIR APPLICATION TO THE PRODUCTION OF SOLID RECOVERED FUELS |
| BS EN 15443:2011 | Solid recovered fuels. Methods for the preparation of the laboratory sample |
| NF EN 15410 : 2011 | SOLID RECOVERED FUELS - METHOD FOR THE DETERMINATION OF THE CONTENT OF MAJOR ELEMENTS (AL, CA, FE, K, MG, NA, P, SI, TI) |
| DIN EN 15415-2:2012-06 | Solid recovered fuels - Determination of particle size distribution - Part 2: Maximum projected length method (manual) for large dimension particles |
| I.S. EN 15415-1:2011 | SOLID RECOVERED FUELS - DETERMINATION OF PARTICLE SIZE DISTRIBUTION - PART 1: SCREEN METHOD FOR SMALL DIMENSION PARTICLES |
| NF EN 15443 : 2011 | SOLID RECOVERED FUELS - METHODS FOR THE PREPARATION OF THE LABORATORY SAMPLE |
| I.S. EN 15408:2011 | SOLID RECOVERED FUELS - METHODS FOR THE DETERMINATION OF SULPHUR (S), CHLORINE (CL), FLUORINE (F) AND BROMINE (BR) CONTENT |
| EN 15408:2011 | Solid recovered fuels - Methods for the determination of sulphur (S), chlorine (Cl), fluorine (F) and bromine (Br) content |
| EN 15359:2011 | Solid recovered fuels - Specifications and classes |
| EN 15403:2011 | Solid recovered fuels - Determination of ash content |
| EN 15590:2011 | Solid recovered fuels - Determination of the current rate of aerobic microbial activity using the real dynamic respiration index |
| EN 15443:2011 | Solid recovered fuels - Methods for the preparation of the laboratory sample |
| UNE-EN 15400:2011 | Solid recovered fuels - Determination of calorific value |
| UNE-EN 15358:2011 | Solid recovered fuels - Quality management systems - Particular requirements for their application to the production of solid recovered fuels |
| UNE-EN 15359:2012 | Solid recovered fuels - Specifications and classes |
| UNE-EN 15414-3:2011 | Solid recovered fuels - Determination of moisture content using the oven dry method - Part 3: Moisture in general analysis sample |
| UNE-EN 15413:2012 | Solid recovered fuels - Methods for the preparation of the test sample from the laboratory sample |
| UNE-EN 15440:2012 | Solid recovered fuels - Methods for the determination of biomass content |
| UNE-EN 15411:2012 | Solid recovered fuels - Methods for the determination of the content of trace elements (As, Ba, Be, Cd, Co, Cr, Cu, Hg, Mo, Mn, Ni, Pb, Sb, Se, Tl, V and Zn) |
| UNE-EN 15403:2011 | Solid recovered fuels - Determination of ash content |
| UNE-EN 15443:2011 | Solid recovered fuels - Methods for the preparation of the laboratory sample |
| UNE-EN 15407:2011 | Solid recovered fuels - Methods for the determination of carbon (C), hydrogen (H) and nitrogen (N) content |
| UNE-EN 15442:2012 | Solid recovered fuels - Methods for sampling |
| UNE-EN 15410:2012 | Solid recovered fuels - Methods for the determination of the content of major elements (Al, Ca, Fe, K, Mg, Na, P, Si, Ti) |
| UNE-EN 15415-1:2012 | Solid recovered fuels - Determination of particle size distribution - Part 1: Screen method for small dimension particles |
| UNE-EN 15408:2011 | Solid recovered fuels - Methods for the determination of sulphur (S), chlorine (Cl), fluorine (F) and bromine (Br) content |
| UNE-EN 15590:2012 | Solid recovered fuels - Determination of the current rate of aerobic microbial activity using the real dynamic respiration index |
| UNE-EN 15402:2011 | Solid recovered fuels - Determination of the content of volatile matter |
| EN 15440 : 2011 COR 2011 | SOLID RECOVERED FUELS - METHODS FOR THE DETERMINATION OF BIOMASS CONTENT |
| ISO 10241:1992 | International terminology standards — Preparation and layout |
| CEN/TR 14980:2004 | Solid recovered fuels - Report on relative difference between biodegradable and biogenic fractions of SRF |
| EN 13965-2:2010 | Characterization of waste - Terminology - Part 2: Management related terms and definitions |
| ISO 11074:2015 | Soil quality — Vocabulary |
| EN ISO 3497:2000 | Metallic coatings - Measurement of coating thickness - X-ray spectrometric methods (ISO 3497:2000) |
| EN 13137:2001 | Characterization of waste - Determination of total organic carbon (TOC) in waste, sludges and sediments |
| ISO 540:2008 | Hard coal and coke — Determination of ash fusibility |
| ISO 3497:2000 | Metallic coatings — Measurement of coating thickness — X-ray spectrometric methods |
| EN 15358:2011 | Solid recovered fuels - Quality management systems - Particular requirements for their application to the production of solid recovered fuels |
| EN 15359:2011 | Solid recovered fuels - Specifications and classes |
| EN 13193:2000 | Packaging - Packaging and the environment - Terminology |
| ISO 9000:2015 | Quality management systems — Fundamentals and vocabulary |
| CEN/TR 14745:2003 | Solid Recovered Fuels |
| EN ISO 9000:2015 | Quality management systems - Fundamentals and vocabulary (ISO 9000:2015) |
| ISO 3534-1:2006 | Statistics — Vocabulary and symbols — Part 1: General statistical terms and terms used in probability |
Summarise
Sorry this product is not available in your region.