EN 50522:2010

1 Scope
2 Normative references
3 Terms and definitions
4 Fundamental requirements
5 Design of earthing systems
6 Measures to avoid transferred potential
7 Construction of earthing systems
8 Measurements
9 Maintainability
Annex A (normative) - Method of calculating permissible touch
        voltages
Annex B (normative) - Touch voltage and body current
Annex C (normative) - Type and minimum dimensions of earth
        electrode materials ensuring mechanical strength and
        corrosion resistance
Annex D (normative) - Current rating calculation of earthing
        conductors and earth electrodes
Annex E (normative) - Description of the recognized specified
        measures M
Annex F (normative) - Measures on earthing systems to reduce the
        effects of high frequency interference
Annex G (normative) - Detailed measures for earthing of equipment
        and installations
Annex H (normative) - Measuring touch voltages
Annex I (informative) - Reduction factors related to earth wires
        of overhead lines and metal sheaths of underground cables
Annex J (informative) - Basis for the design of earthing systems
Annex K (informative) - Installing the earth electrodes and
        earthing conductors
Annex L (informative) - Measurements for and on earthing systems
Annex M (normative) - Details on site inspection and documentation
        of earthing systems
Annex N (informative) - The use of reinforcing bars in concrete
        for earthing purpose
Annex O (informative) - Global Earthing System
Annex P (normative) - Special national conditions
Annex Q (informative) - A-deviations

This European Standard is applicable to specify the requirements for the design and erection of earthing systems of electrical installations, in systems with nominal voltage above 1 kV a.c. and nominal frequency up to and including 60 Hz, so as to provide safety and proper functioning for the use intended. For the purpose of interpreting this standard, an electrical power installation is considered to be one of the following: a)substation, including substation for railway power supply; b)electrical installations on mast, pole and tower; switchgear and/or transformers located outside a closed electrical operating area; c)one (or more) power station(s) located on a single site; the installation includes generators and transformers with all associated switchgear and all electrical auxiliary systems. Connections between generating stations located on different sites are excluded; d)the electrical system of a factory, industrial plant or other industrial, agricultural, commercial or public premises. The electrical power installation includes, among others, the following equipment: –rotating electrical machines; –switchgear; –transformers and reactors; –converters; –cables; –wiring systems; –batteries; –capacitors; –earthing systems; –buildings and fences which are part of a closed electrical operating area; –associated protection, control and auxiliary systems; –large air core reactor. NOTEIn general, a standard for an item of equipment takes precedence over this standard. This European Standard does not apply to the design and erection of earthing systems of any of the following: –overhead and underground lines between separate installations; –electric railways; –mining equipment and installations; –fluorescent lamp installations; –installations on ships and off-shore installations; –electrostatic equipment (e.g. electrostatic precipitators, spray-painting units); –test sites; –medical equipment, e.g. medical X-ray equipment. This European Standard does not apply to the requirements for carrying out live working on electrical installations.