Customer Support: 131 242

  • There are no items in your cart
We noticed you’re not on the correct regional site. Switch to our AMERICAS site for the best experience.
Dismiss alert

EN 60243-1:2013

Current
Current

The latest, up-to-date edition.

ELECTRIC STRENGTH OF INSULATING MATERIALS - TEST METHODS - PART 1: TESTS AT POWER FREQUENCIES (IEC 60243-1:2013)
Published date

12-07-2013

FOREWORD
1 Scope
2 Normative references
3 Terms and definitions
4 Significance of the test
5 Electrodes and specimens
6 Conditioning before tests
7 Surrounding medium
8 Electrical apparatus
9 Procedure
10 Mode of increase of voltage
11 Criterion of breakdown
12 Number of tests
13 Report
Annex A (informative) - Treatment of experimental
        data
Bibliography
Annex ZA (normative) - Normative references to
         international publications with their
         corresponding European publications

Gives test methods for the determination of short-time electric strength of solid insulating materials at power frequencies between 48 Hz and 62 Hz.

Committee
SR 112
DocumentType
Test Method
PublisherName
European Committee for Standards - Electrical
Status
Current
Supersedes

NF EN 60464-2 : 2002 AMD 1 2006 VARNISHES USED FOR ELECTRICAL INSULATION - PART 2: METHODS OF TEST
CEI EN 60371-2 : 2005 SPECIFICATION FOR INSULATING MATERIALS BASED ON MICA - PART 2: METHODS OF TEST
BS EN 60243-2:2014 Electric strength of insulating materials. Test methods Additional requirements for tests using direct voltage
I.S. EN 60079-0:2012 EXPLOSIVE ATMOSPHERES - PART 0: EQUIPMENT - GENERAL REQUIREMENTS (IEC 60079-0:2011 (MOD))
I.S. EN 60674-2:2017 SPECIFICATION FOR PLASTIC FILMS FOR ELECTRICAL PURPOSES - PART 2: METHODS OF TEST
UNE-EN 61400-24:2011 Wind turbines - Part 24: Lightning protection
CEI EN 60672-2 : 2000 CERAMIC AND GLASS INSULATING MATERIALS - PART 2: METHODS OF TEST
BS EN 61730-2 : 2007 PHOTOVOLTAIC (PV) MODULE SAFETY QUALIFICATION - PART 2: REQUIREMENTS FOR TESTING
BS EN 60819-2:2002 Non-cellulosic papers for electrical purposes Methods of test
BS EN 60664-1:2007 Insulation coordination for equipment within low-voltage systems Principles, requirements and tests
BS EN 60371-3-7:1996 Specification for insulating materials based on mica Specifications for individual materials - Polyester film mica paper with an epoxy resin binder for single conductor taping
BS EN 61061-3-2:2002 Non-impregnated densified laminated wood for electrical purposes. Specification for individual materials Rings produced from beech veneer
BS EN 60216-2:2005 Electrical insulating materials. Thermal endurance properties Determination of thermal endurance properties of electrical insulating materials. Choice of test criteria
CEI 20-95 : 2010 ELECTRIC CABLES - ACCESSORIES - MATERIAL CHARACTERISATION - PART 2: FINGERPRINTING AND TYPE TESTS FOR HEAT SHRINKABLE COMPONENTS FOR LOW VOLTAGE APPLICATIONS
CEI EN 60454-2 : 2008 PRESSURE-SENSITIVE ADHESIVE TAPES FOR ELECTRICAL PURPOSES - PART 2: METHODS OF TEST
CEI EN 60544-2 : 2013 ELECTRICAL INSULATING MATERIALS - DETERMINATION OF THE EFFECTS OF IONIZING RADIATION ON INSULATING MATERIALS - PART 2: PROCEDURES FOR IRRADIATION AND TEST
DIN EN 45510-2-7:2003-12 GUIDE FOR PROCUREMENT OF POWER STATION EQUIPMENT - PART 2-7: ELECTRICAL EQUIPMENT - SWITCHGEAR AND CONTROLGEAR
I.S. EN IEC 60370:2018 TEST PROCEDURE FOR THERMAL ENDURANCE OF INSULATING RESINS AND VARNISHES FOR IMPREGNATION PURPOSES - ELECTRIC BREAKDOWN METHODS
I.S. EN 50123-4:2003 RAILWAY APPLICATIONS - FIXED INSTALLATIONS - D.C. SWITCHGEAR - PART 4: OUTDOOR D.C. DISCONNECTORS, SWITCH-DISCONNECTORS AND EARTHING SWITCHES
BS EN 61340-4-4 : 2012 ELECTROSTATICS - PART 4-4: STANDARD TEST METHODS FOR SPECIFIC APPLICATIONS - ELECTROSTATIC CLASSIFICATION OF FLEXIBLE INTERMEDIATE BULK CONTAINERS (FIBC)
I.S. EN 60243-3:2014 ELECTRIC STRENGTH OF INSULATING MATERIALS - TEST METHODS - PART 3: ADDITIONAL REQUIREMENTS FOR 1,2/50 [MU]S IMPULSE TESTS
I.S. EN 62271-212:2017 HIGH-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 212: COMPACT EQUIPMENT ASSEMBLY FOR DISTRIBUTION SUBSTATION (CEADS)
CEI EN 60079-32-2 : 2016 EXPLOSIVE ATMOSPHERES - PART 32-2: ELECTROSTATICS HAZARDS - TESTS
I.S. HD 631.2:2007 ELECTRIC CABLES - ACCESSORIES - MATERIAL CHARACTERISATION - PART 2: FINGERPRINTING AND TYPE TESTS FOR HEAT SHRINKABLE COMPONENTS FOR LOW VOLTAGE APPLICATIONS
PD CLC/TR 60079-32-1:2015 Explosive atmospheres Electrostatic hazards, guidance
HD 631.2 : 2007 ELECTRIC CABLES - ACCESSORIES - MATERIAL CHARACTERISATION - PART 2: FINGERPRINTING AND TYPE TESTS FOR HEAT SHRINKABLE COMPONENTS FOR LOW VOLTAGE APPLICATIONS
EN 60455-3-8:2013 Resin based reactive compounds used for electrical insulation - Part 3: Specifications for individual materials - Sheet 8: Resins for cable accessories
EN 60819-2:2001 Non-cellulosic papers for electrical purposes - Part 2: Methods of test
DIN EN 14598-3:2005-07 Reinforced thermosetting moulding compounds - Specification for Sheet Moulding Compound (SMC) and Bulk Moulding Compound (BMC) - Part 3: Specific requirements
DIN EN 14598-2:2005-07 Reinforced thermosetting moulding compounds - Specification for Sheet Moulding Compound (SMC) and Bulk Moulding Compound (BMC) - Part 2: Methods of test and general requirements
IEC 62011-2:2004 Insulating materials - Industrial, rigid, moulded, laminated tubes and rods of rectangular and hexagonal cross-section, based on thermosetting resins for electrical purposes - Part 2: Methods of test
UNE-EN 62271-212:2017 High-voltage switchgear and controlgear - Part 212: Compact Equipment Assembly for Distribution Substation (CEADS)
BS EN 61241-18:2004 Electrical apparatus for use in the presence of combustible dust Protection by encapsulation \'mD\'
BS EN 60079-18 : 2015 EXPLOSIVE ATMOSPHERES - PART 18: EQUIPMENT PROTECTION BY ENCAPSULATION 'M'
BS EN 60893-2:2004 Insulating materials. Industrial rigid laminated sheets based on thermosetting resins for electrical purposes Methods of test
EN 60371-3-4:1995/A1:2006 SPECIFICATION FOR INSULATING MATERIALS BASED ON MICA - PART 3: SPECIFICATIONS FOR INDIVIDUAL MATERIALS - SHEET 4: POLYESTER FILM-BACKED MICA PAPER WITH A B-STAGE EPOXY RESIN BINDER
EN 60371-3-7:1995/A1:2006 SPECIFICATION FOR INSULATING MATERIALS BASED ON MICA - PART 3: SPECIFICATIONS FOR INDIVIDUAL MATERIALS - SHEET 7: POLYESTER FILM MICA PAPER WITH AN EPOXY RESIN BINDER FOR SINGLE CONDUCTOR TAPING
EN 60626-2:2009 Combined flexible materials for electrical insulation - Part 2: Methods of test
EN 61189-2:2006 Test methods for electrical materials, printed boards and other interconnection structures and assemblies - Part 2: Test methods for materials for interconnection structures
EN 62011-2:2004 Insulating materials - Industrial, rigid, moulded, laminated tubes and rods of rectangular and hexagonal cross-section, based on thermosetting resins for electrical purposes - Part 2: Methods of test
EN 60216-2:2005 Electrical insulating materials - Thermal endurance properties - Part 2: Determination of thermal endurance properties of electrical insulating materials - Choice of test criteria
EN 60684-2:2011 Flexible insulating sleeving - Part 2: Methods of test
EN 62271-201:2014 High-voltage switchgear and controlgear - Part 201: AC solid-insulation enclosed switchgear and controlgear for rated voltages above 1 kV and up to and including 52 kV
EN 62271-212:2017 High-voltage switchgear and controlgear - Part 212: Compact Equipment Assembly for Distribution Substation (CEADS)
EN 62271-202:2014/AC:2014 HIGH-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 202: HIGH-VOLTAGE/LOW-VOLTAGE PREFABRICATED SUBSTATION (IEC 62271-202:2014)
EN 61730-2:2007/A1:2012 PHOTOVOLTAIC (PV) MODULE SAFETY QUALIFICATION - PART 2: REQUIREMENTS FOR TESTING (IEC 61730-2:2004/A1:2011)
EN 60243-2:2014 Electric strength of insulating materials - Test methods - Part 2: Additional requirements for tests using direct voltage
EN 60079-32-2:2015 Explosive atmospheres - Part 32-2: Electrostatics hazards - Tests
EN 60454-2:2007 PRESSURE-SENSITIVE ADHESIVE TAPES FOR ELECTRICAL PURPOSES - PART 2: METHODS OF TEST
EN 60371-3-6:1995/A1:2006 SPECIFICATION FOR INSULATING MATERIALS BASED ON MICA - PART 3: SPECIFICATIONS FOR INDIVIDUAL MATERIALS - SHEET 6: GLASS-BACKED MICA PAPER WITH A B-STAGE EPOXY RESIN BINDER
EN 60893-2:2004 Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 2: Methods of test
EN 61086-2:2004 Coatings for loaded printed wire boards (conformal coatings) - Part 2: Methods of test
BS EN 60454-2:2007 Pressure-sensitive adhesive tapes for electrical purposes Methods of test
DD CLC/TS 60034-18-34:2004 Rotating electrical machines. Functional evaluation of insulation systems Test procedures for form-wound windings. Evaluation of thermomechanical endurance of insulation systems
BS EN 45510-2-7:2002 Guide for the procurement of power station equipment. Electrical equipment Switchgear and controlgear
BS EN 50123-2:2003 Railway applications. Fixed installations. D.C. switchgear D.C. circuit breakers
EN IEC 62677-2:2018 Heat shrinkable low and medium voltage moulded shapes - Part 2 Methods of test
14/30301115 DC : 0 BS EN 3207 - AEROSPACE SERIES - RUBBER COMPOUNDS - TECHNICAL SPECIFICATION
CEI EN 60664-1 : 2008 INSULATION COORDINATION FOR EQUIPMENT WITHIN LOW-VOLTAGE SYSTEMS - PART 1: PRINCIPLES, REQUIREMENTS AND TESTS
CEI UNI EN 45510-2-7 : 2006 GUIDE FOR PROCUREMENT OF POWER STATION EQUIPMENT - PART 2-7: ELECTRICAL EQUIPMENT - SWITCHGEAR AND CONTROLGEAR
EN IEC 60370:2018 Test procedure for thermal endurance of insulating resins and varnishes for impregnation purposes - Electric breakdown methods
CEI EN 61061-3-2 : 2002 NON-IMPREGNATED DENSIFIED LAMINATED WOOD FOR ELECTRICAL PURPOSES - PART 3: SPECIFICATIONS FOR INDIVIDUAL MATERIALS - SHEET 2: RINGS PRODUCED FROM BEECH VENEER
EN 50123-7-2:2003 Railway applications - Fixed installations - D.C. switchgear - Part 7-2: Measurement, control and protection devices for specific use in d.c. traction systems - Isolating current transducers and other current measuring devices
BS EN 50123-1:2003 Railway applications. Fixed installations. D.C. switchgear General
SAE AIR 6127 : 2017 MANAGING HIGHER VOLTAGES IN AEROSPACE ELECTRICAL SYSTEMS
I.S. EN IEC 62677-2:2018 HEAT SHRINKABLE LOW AND MEDIUM VOLTAGE MOULDED SHAPES - PART 2: METHODS OF TEST
I.S. EN IEC 61340-4-4:2018 ELECTROSTATICS - PART 4-4: STANDARD TEST METHODS FOR SPECIFIC APPLICATIONS - ELECTROSTATIC CLASSIFICATION OF FLEXIBLE INTERMEDIATE BULK CONTAINERS (FIBC)
I.S. EN 60454-2:2007 PRESSURE-SENSITIVE ADHESIVE TAPES FOR ELECTRICAL PURPOSES - PART 2: METHODS OF TEST
CEI EN 60763-2 : 2007 SPECIFICATION FOR LAMINATED PRESSBOARD - PART 2: METHODS OF TEST
CEI EN 60455-3-8 : 2014 RESIN BASED REACTIVE COMPOUNDS USED FOR ELECTRICAL INSULATION - PART 3: SPECIFICATIONS FOR INDIVIDUAL MATERIALS - SHEET 8: RESINS FOR CABLE ACCESSORIES
I.S. EN IEC 61730-1:2018 PHOTOVOLTAIC (PV) MODULE SAFETY QUALIFICATION - PART 1: REQUIREMENTS FOR CONSTRUCTION
I.S. EN 60763-2:2007 SPECIFICATION FOR LAMINATED PRESSBOARD - PART 2: METHODS OF TEST
I.S. EN 50123-7-2:2003 RAILWAY APPLICATIONS - FIXED INSTALLATIONS - D.C. SWITCHGEAR - PART 7-2: MEASUREMENT, CONTROL AND PROTECTION DEVICES FOR SPECIFIC USE IN D.C. TRACTION SYSTEMS - ISOLATING CURRENT TRANSDUCERS AND OTHER CURRENT MEASURING DEVICES
BS EN 14598-2:2005 Reinforced thermosetting moulding compounds. Specification for sheet moulding compound (SMC) and bulk moulding compound (BMC) Methods of test and general requirements
I.S. EN 61212-2:2006 INSULATING MATERIALS - INDUSTRIAL RIGID ROUND LAMINATED TUBES AND RODS BASED ON THERMOSETTING RESINS FOR ELECTRICAL PURPOSES - PART 2: METHODS OF TEST
I.S. EN 60893-2:2004 INSULATING MATERIALS - INDUSTRIAL RIGID LAMINATED SHEETS BASED ON THERMOSETTING RESINS FOR ELECTRICAL PURPOSES - PART 2: METHODS OF TEST
EN 60079-14:2014/AC:2016 EXPLOSIVE ATMOSPHERES - PART 14: ELECTRICAL INSTALLATIONS DESIGN, SELECTION AND ERECTION (IEC 60079-14:2013/COR1:2016)
I.S. EN 14125:2013 THERMOPLASTIC AND FLEXIBLE METAL PIPEWORK FOR UNDERGROUND INSTALLATION AT PETROL FILLING STATIONS
VDE 0335-2 : 2000 CERAMIC AND GLASS INSULATING MATERIALS - METHODS OF TEST
BS 7933-1:2007 Electric cables. Accessories. Material characterisation Fingerprinting and type tests for resinous compounds
DIN EN 60672-2 : 2000 CERAMIC AND GLASS INSULATING MATERIALS - PART 2: METHODS OF TEST
11/30231856 DC : 0 BS EN 14125 - THERMOPLASTIC AND FLEXIBLE METAL PIPEWORK FOR UNDERGROUND INSTALLATION AT PETROL FILLING STATIONS
BS EN 60455-3-8:2013 Resin based reactive compounds used for electrical insulation Specifications for individual materials. Sheet 8: Resins for cable accessories
BS EN 50123-7-1:2003 Railway applications. Fixed installations. d.c. switchgear. Measurement, control and protection devices for specific use in d.c. traction systems Measurement, control and protection devices for specific use in d.c. traction systems. Application guide
BS EN 60371-3-4:1996 Specification for insulating materials based on mica Specifications for individual materials - Polyester film-backed mica paper with a B-stage epoxy resin binder
BS EN 60455-2:2015 Resin based reactive compounds used for electrical insulation Methods of test
BS EN 61241-0:2006 Electrical apparatus for use in the presence of combustible dust General requirements
BS EN 50281-1-1:1999 Electrical apparatus for use in the presence of combustible dust. Electrical apparatus protected by enclosures Construction and testing
CEI EN 62011-2 : 2005 INSULATING MATERIALS - INDUSTRIAL, RIGID, MOULDED, LAMINATED TUBES AND RODS OF RECTANGULAR AND HEXAGONAL CROSS-SECTION, BASED ON THERMOSETTING RESINS FOR ELECTRICAL PURPOSES - PART 2: METHODS OF TEST
CEI EN 50123-1 : 2003 RAILWAY APPLICATIONS - FIXED INSTALLATIONS - D.C. SWITCHGEAR - PART 1: GENERAL
BS EN 60684-2:2011 Flexible insulating sleeving Methods of test
CEI EN 60554-2 : 2002 CELLULOSIC PAPERS FOR ELECTRICAL PURPOSES - PART 2: METHODS OF TEST
BS EN 61086-2:2004 Coatings for loaded printed wire boards (conformal coatings) Methods of test
BS EN 60079-0 : 2012 EXPLOSIVE ATMOSPHERES - PART 0: EQUIPMENT - GENERAL REQUIREMENTS
HD 631.1 : 200S2 ELECTRIC CABLES - ACCESSORIES - MATERIAL CHARACTERISATION - PART 1: FINGERPRINTING AND TYPE TESTS FOR RESINOUS COMPOUNDS
I.S. EN 60544-2:2012 ELECTRICAL INSULATING MATERIALS - DETERMINATION OF THE EFFECTS OF IONIZING RADIATION ON INSULATING MATERIALS - PART 2: PROCEDURES FOR IRRADIATION AND TEST (IEC 60544-2:2012 (EQV))
I.S. EN 60626-2:2009 COMBINED FLEXIBLE MATERIALS FOR ELECTRICAL INSULATION - PART 2: METHODS OF TEST
BS EN 62271-200:2012 High-voltage switchgear and controlgear AC metal-enclosed switchgear and controlgear for rated voltages above 1 kV and up to and including 52 kV
I.S. EN 60455-2:2015 RESIN BASED REACTIVE COMPOUNDS USED FOR ELECTRICAL INSULATION - PART 2: METHODS OF TEST
CEI EN 60079-18 : 2016 EXPLOSIVE ATMOSPHERES - PART 18: EQUIPMENT PROTECTION BY ENCAPSULATION 'M'
CEI EN 60819-2 : 2002 NON-CELLULOSIC PAPERS FOR ELECTRICAL PURPOSES - PART 2: METHODS OF TEST
I.S. EN 60079-32-2:2015 EXPLOSIVE ATMOSPHERES - PART 32-2: ELECTROSTATICS HAZARDS - TESTS
CEI EN 60243-2 : 2015 ELECTRIC STRENGTH OF INSULATING MATERIALS - TEST METHODS - PART 2: ADDITIONAL REQUIREMENTS FOR TESTS USING DIRECT VOLTAGE
I.S. EN 60079-14:2014 EXPLOSIVE ATMOSPHERES - PART 14: ELECTRICAL INSTALLATIONS DESIGN, SELECTION AND ERECTION
EN IEC 61340-4-4:2018 Electrostatics - Part 4-4: Standard test methods for specific applications - Electrostatic classification of flexible intermediate bulk containers (FIBC)
CEI EN 61086-2 : 2005 COATINGS FOR LOADED PRINTED WIRE BOARDS (CONFORMAL COATINGS) - PART 2: METHODS OF TEST
CEI EN 60626-2 : 2012 COMBINED FLEXIBLE MATERIALS FOR ELECTRICAL INSULATION - PART 2: METHODS OF TEST
EN 62271-200:2012/AC:2015 HIGH-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 200: AC METAL-ENCLOSED SWITCHGEAR AND CONTROLGEAR FOR RATED VOLTAGES ABOVE 1 KV AND UP TO AND INCLUDING 52 KV (IEC 62271-200:2011)
I.S. EN 61340-4-4:2012 ELECTROSTATICS - PART 4-4: STANDARD TEST METHODS FOR SPECIFIC APPLICATIONS - ELECTROSTATIC CLASSIFICATION OF FLEXIBLE INTERMEDIATE BULK CONTAINERS (FIBC) (IEC 61340-4-4:2012 (EQV))
I.S. EN 60464-2:2002 VARNISHES USED FOR ELECTRICAL INSULATION - PART 2: METHODS OF TEST
I.S. EN 60371-3-7:1999 SPECIFICATION FOR INSULATING MATERIALS BASED ON MICA - PART 3: SPECIFICATIONS FOR INDIVIDUAL MATERIALS - SHEET 7: POLYESTER FILM MICA PAPER WITH AN EPOXY RESIN BINDER FOR SINGLE CONDUCTOR TAPING
I.S. EN 60371-3-4:1998 SPECIFICATION FOR INSULATING MATERIALS BASED ON MICA - PART 3: SPECIFICATIONS FOR INDIVIDUAL MATERIALS - SHEET 4: POLYESTER FILM-BACKED MICA PAPER WITH A B-STAGE EPOXY RESIN BINDER
UNE-EN 60079-14:2016 Explosive atmospheres - Part 14: Electrical installations design, selection and erection
BS EN 60079-14:2014 Explosive atmospheres Electrical installations design, selection and erection
EN 60664-1:2007 Insulation coordination for equipment within low-voltage systems - Part 1: Principles, requirements and tests
EN 60674-2:2017/AC:2018-01 SPECIFICATION FOR PLASTIC FILMS FOR ELECTRICAL PURPOSES - PART 2: METHODS OF TEST (IEC 60674-2:2016/COR1:2017)
EN 50532:2010 Compact Equipment Assembly for Distribution Substations (CEADS)
UNI EN 14125 : 2013 THERMOPLASTIC AND FLEXIBLE METAL PIPEWORK FOR UNDERGROUND INSTALLATION AT PETROL FILLING STATIONS
EN 50281-1-1 : 98 AMD 1 2002 ELECTRICAL APPARATUS PROTECTED BY ENCLOSURES - CONSTRUCTION AND TESTING FOR USE IN THE PRESENCE OF COMBUSTIBLE DUST - ELECTRICAL APPARATUS PROTECTED BY ENCLOSURES - CONSTRUCTION AND TESTING
I.S. EN 50123-3:2003 RAILWAY APPLICATIONS - FIXED INSTALLATIONS - D.C. SWITCHGEAR - PART 3: INDOOR D.C. DISCONNECTORS, SWITCH-DISCONNECTORS AND EARTHING SWITCHES
CEI EN 60243-3 : 2015 ELECTRIC STRENGTH OF INSULATING MATERIALS - TEST METHODS - PART 3: ADDITIONAL REQUIREMENTS FOR 1,2/50 [MU]S IMPULSE TESTS
BS EN 60079-32-2:2015 Explosive atmospheres Electrostatics hazards. Tests
CEI EN 61400-24 : 2011 WIND TURBINES - PART 24: LIGHTNING PROTECTION
I.S. EN 60684-2:2011 FLEXIBLE INSULATING SLEEVING - PART 2: METHODS OF TEST (IEC 60684-2:2011)
PREN 14125 : DRAFT 2011 THERMOPLASTIC AND FLEXIBLE METAL PIPEWORK FOR UNDERGROUND INSTALLATION AT PETROL FILLING STATIONS
BS EN 61251:2016 Electrical insulating materials and systems. A.C. voltage endurance evaluation
I.S. EN 50532:2010 COMPACT EQUIPMENT ASSEMBLY FOR DISTRIBUTION SUBSTATIONS (CEADS)
BS EN 50123-7-3:2003 Railway applications. Fixed installations. d.c. switchgear. Measurement, control and protection devices for specific use in d.c. traction systems Isolating voltage transducers and other voltage measuring devices
CEI EN 60641-2 : 2005 PRESSBOARD AND PRESSPAPER FOR ELECTRICAL PURPOSES - PART 2: METHODS OF TEST
BS 7933-2:2007 Electric cables. Accessories. Material characterisation Fingerprinting and type tests for heat shrinkable components for low voltage applications
BS EN 60371-2:2004 Specification for insulating materials based on mica Methods of test
BS EN 60371-3-6:1996 Specification for insulating materials based on mica Specifications for individual materials - Gloss-backed mica paper with a B-stage epoxy resin binder
BS EN 60626-2:2009 Combined flexible materials for electrical insulation Methods of test
UNI CEI EN 45510-2-7 : 2011 GUIDE FOR PROCUREMENT OF POWER STATION EQUIPMENT - PART 2-7: ELECTRICAL EQUIPMENT - SWITCHGEAR AND CONTROLGEAR
BS EN 60464-2:2001 Varnishes used for electrical insulation Methods of test
CLC/TS 60034-18-34:2004 Rotating electrical machines - Part 18-34: Functional evaluation of insulation systems - Test procedures for form-wound windings - Evaluation of thermomechanical endurance of insulation systems
I.S. EN 50123-1:2003 RAILWAY APPLICATIONS - FIXED INSTALLATIONS - D.C. SWITCHGEAR - GENERAL
I.S. EN 61189-2:2006 TEST METHODS FOR ELECTRICAL MATERIALS, PRINTED BOARDS AND OTHER INTERCONNECTION STRUCTURES AND ASSEMBLIES - PART 2: TEST METHODS FOR MATERIALS FOR INTERCONNECTION STRUCTURES
EN IEC 61730-1:2018/AC:2018-06 PHOTOVOLTAIC (PV) MODULE SAFETY QUALIFICATION - PART 1: REQUIREMENTS FOR CONSTRUCTION (IEC 61730-1:2016)
BS EN 60674-2:2017+A1:2019 Specification for plastic films for electrical purposes Methods of test
I.S. EN 50123-2:2003 RAILWAY APPLICATIONS - FIXED INSTALLATIONS - D.C. SWITCHGEAR - D.C. CIRCUIT BREAKERS
BS EN 50123-7-2:2003 Railway applications. Fixed installations. d.c. switchgear. Measurement, control and protection devices for specific use in d.c. traction systems Isolating current transducers and other current measuring devices
CEI EN 60216-2 : 2006 ELECTRICAL INSULATING MATERIALS - THERMAL ENDURANCE PROPERTIES - PART 2: DETERMINATION OF THERMAL ENDURANCE PROPERTIES OF ELECTRICAL INSULATING MATERIALS - CHOICE OF TEST CRITERIA
I.S. EN 60371-2:2005 SPECIFICATION FOR INSULATING MATERIALS BASED ON MICA - PART 2: METHODS OF TEST
I.S. EN 45510-2-7:2002 GUIDE FOR PROCUREMENT OF POWER STATION EQUIPMENT - PART 2-7: ELECTRICAL EQUIPMENT - SWITCHGEAR AND CONTROLGEAR
I.S. EN 50123-7-3:2003 RAILWAY APPLICATIONS - FIXED INSTALLATIONS - D.C. SWITCHGEAR - PART 7-3: MEASUREMENT, CONTROL AND PROTECTION DEVICES FOR SPECIFIC USE IN D.C. TRACTION SYSTEMS - ISOLATING VOLTAGE TRANSDUCERS AND OTHER VOLTAGE MEASURING DEVICES
I.S. EN 61086-2:2004 COATINGS FOR LOADED PRINTED WIRE BOARDS (CONFORMAL COATINGS) - PART 2: METHODS OF TEST
I.S. EN 61241-0:2006 ELECTRICAL APPARATUS FOR USE IN THE PRESENCE OF COMBUSTIBLE DUST - PART 0: GENERAL REQUIREMENTS
I.S. EN 60371-3-6:1998 SPECIFICATION FOR INSULATING MATERIALS BASED ON MICA - PART 3: SPECIFICATIONS FOR INDIVIDUAL MATERIALS - SHEET 6: GLASS-BACKED MICA PAPER WITH A B-STAGE EPOXY RESIN BINDER
I.S. EN 60664-1:2007 INSULATION COORDINATION FOR EQUIPMENT WITHIN LOW-VOLTAGE SYSTEMS - PART 1: PRINCIPLES, REQUIREMENTS AND TESTS
BS EN 62271-212:2017 High-voltage switchgear and controlgear Compact Equipment Assembly for Distribution Substation (CEADS)
UNE-EN 61730-2:2007 Photovoltaic (PV) module safety qualification - Part 2: Requirements for testing
BS EN 50532:2010 Compact equipment assembly for distribution substations (CEADS)
UNE-EN 60079-0:2013 Explosive atmospheres - Part 0: Equipment - General requirements
UNE-EN 14125:2013 Thermoplastic and flexible metal pipework for underground installation at petrol filling stations
BS EN 14125:2013 Thermoplastic and flexible metal pipework for underground installation at petrol filling stations
BS EN 14598-3:2005 Reinforced thermosetting moulding compounds. Specification for sheet moulding compound (SMC) and bulk moulding compound (BMC) Specific requirements
09/30202403 DC : 0 BS EN 50532 - COMPACT EQUIPMENT ASSEMBLY FOR DISTRIBUTION SUBSTATIONS (CEADS)
UNE-EN 50532:2011 Compact Equipment Assembly for Distribution Substations (CEADS)
EN 61241-0:2006 Electrical apparatus for use in the presence of combustible dust - Part 0: General requirements
EN 14598-2:2005/AC:2006 REINFORCED THERMOSETTING MOULDING COMPOUNDS - SPECIFICATION FOR SHEET MOULDING COMPOUND (SMC) AND BULK MOULDING COMPOUND (BMC) - PART 2: METHODS OF TEST AND GENERAL REQUIREMENTS
EN 14125:2013 Thermoplastic and flexible metal pipework for underground installation at petrol filling stations
EN 45510-2-7:2002 Guide for procurement of power station equipment - Part 2-7: Electrical equipment - Switchgear and controlgear
EN 14598-3:2005 Reinforced thermosetting moulding compounds - Specification for Sheet Moulding Compound (SMC) and Bulk Moulding Compound (BMC) - Part 3: Specific requirements
EN 50123-7-3:2003 Railway applications - Fixed installations - D.C. switchgear - Part 7-3: Measurement, control and protection devices for specific use in d.c. traction systems - Isolating voltage transducers and other voltage measuring devices
I.S. EN 62011-2:2004 INSULATING MATERIALS - INDUSTRIAL, RIGID, MOULDED, LAMINATED TUBES AND RODS OF RECTANGULAR AND HEXAGONAL CROSS-SECTION, BASED ON THERMOSETTING RESINS FOR ELECTRICAL PURPOSES, - PART 2: METHODS OF TEST
CEI EN 60684-2 : 2012 FLEXIBLE INSULATING SLEEVING - PART 2: METHODS OF TEST
BS EN 60544-2:2012 Electrical insulating materials. Determination of the effects of ionizing radiation on insulating materials Procedures for irradiation and test
BS EN 62011-2:2004 Insulating materials. Industrial, rigid, moulded, laminated tubes and rods of rectangular and hexagonal cross-section, based on thermosetting resins for electrical purposes Methods of test
BS EN 60371-3-9:1996 Insulating materials based on mica Specifications for individual materials - Moulding micanite
I.S. EN 60243-2:2014 ELECTRIC STRENGTH OF INSULATING MATERIALS - TEST METHODS - PART 2: ADDITIONAL REQUIREMENTS FOR TESTS USING DIRECT VOLTAGE
BS EN 60243-3:2014 Electric strength of insulating materials. Test methods Additional requirements for 1,2/50 μs impulse tests
BS EN 62271-201:2014 High-voltage switchgear and controlgear AC solid-insulation enclosed switchgear and controlgear for rated voltages above 1 kV and up to and including 52 kV
CEI 20-79 : 2009 ELECTRIC CABLES - ACCESSORIES - MATERIAL CHARACTERISATION - PART 1: FINGERPRINTING AND TYPE TESTS FOR RESINOUS COMPOUNDS
BS EN 60763-2:2007 Specification for laminated pressboard Methods of test
I.S. EN 60554-2:2002 CELLULOSIC PAPERS FOR ELECTRICAL PURPOSES - PART 2: METHODS OF TEST
BS EN IEC 60370:2018 Test procedure for thermal endurance of insulating resins and varnishes for impregnation purposes. Electric breakdown methods
I.S. EN 60371-3-9:1999 INSULATING MATERIALS BASED ON MICA - PART 3: SPECIFICATIONS FOR INDIVIDUAL MATERIALS - SHEET 9: MOULDING MICANITE
BS EN 61400-24:2010 Wind turbines Lightning protection
I.S. EN 60641-2:2004 SPECIFICATION FOR PRESSBOARD AND PRESSPAPER FOR ELECTRICAL PURPOSES - METHODS OF TEST
I.S. EN 60455-3-8:2013 RESIN BASED REACTIVE COMPOUNDS USED FOR ELECTRICAL INSULATION - PART 3: SPECIFICATIONS FOR INDIVIDUAL MATERIALS - SHEET 8: RESINS FOR CABLE ACCESSORIES (IEC 60455-3-8:2013 (EQV))
I.S. EN 60216-2:2005 ELECTRICAL INSULATING MATERIALS - THERMAL ENDURANCE PROPERTIES - PART 2: DETERMINATION OF THERMAL ENDURANCE PROPERTIES OF ELECTRICAL INSULATING MATERIALS - CHOICE OF TEST CRITERIA
I.S. EN 60672-2:2000 CERAMIC AND GLASS INSULATING MATERIALS - PART 2: METHODS OF TEST
I.S. EN 61400-24:2010 WIND TURBINES - PART 24: LIGHTNING PROTECTION
EN 60079-18:2015/A1:2017 EXPLOSIVE ATMOSPHERES - PART 18: EQUIPMENT PROTECTION BY ENCAPSULATION 'M' (IEC 60079-18:2014/A1:2017)
I.S. EN 60079-18:2015 EXPLOSIVE ATMOSPHERES - PART 18: EQUIPMENT PROTECTION BY ENCAPSULATION 'M'
CLC/TR 60079-32-1:2015 Explosive atmospheres - Part 32-1: Electrostatic Hazards - Guidance
I.S. EN 61730-2:2007 PHOTOVOLTAIC (PV) MODULE SAFETY QUALIFICATION - PART 2: REQUIREMENTS FOR TESTING (IEC 61730-2:2004 (MOD))
EN 61340-4-4:2012/A1:2015 ELECTROSTATICS - PART 4-4: STANDARD TEST METHODS FOR SPECIFIC APPLICATIONS - ELECTROSTATIC CLASSIFICATION OF FLEXIBLE INTERMEDIATE BULK CONTAINERS (FIBC) (IEC 61340-4-4:2012)
DIN EN 14125:2013-09 THERMOPLASTIC AND FLEXIBLE METAL PIPEWORK FOR UNDERGROUND INSTALLATION AT PETROL FILLING STATIONS
UNE-EN 60079-32-2:2016 Explosive atmospheres - Part 32-2: Electrostatics hazards - Tests
BS EN 61189-2:2006 Test methods for electrical materials, printed boards and other interconnection structures and assemblies Test methods for materials for interconnection structures
BS EN 61212-2:2006 Insulating materials. Industrial rigid round laminated tubes and rods based on thermosetting resins for electrical purposes Methods of test
BS EN 62271-202:2014 High-voltage switchgear and controlgear High-voltage/low-voltage prefabricated substation
EN 61212-2:2006 Insulating materials - Industrial rigid round laminated tubes and rods based on thermosetting resins for electrical purposes - Part 2: Methods of test
EN 60079-0:2012/A11:2013 EXPLOSIVE ATMOSPHERES - PART 0: EQUIPMENT - GENERAL REQUIREMENTS (IEC 60079-0:2011, MODIFIED)
EN 61251:2016 Electrical insulating materials and systems - A.C. voltage endurance evaluation
EN 60763-2:2007 Specification for laminated pressboard - Part 2: Methods of test
EN 50123-1:2003 Railway applications - Fixed installations - D.C. switchgear - Part 1: General
EN 50123-7-1:2003 Railway applications - Fixed installations - D.C. switchgear - Part 7-1: Measurement, control and protection devices for specific use in d.c. traction systems - Application guide
EN 50123-4:2003/A1:2013 RAILWAY APPLICATIONS - FIXED INSTALLATIONS - D.C. SWITCHGEAR - PART 4: OUTDOOR D.C. DISCONNECTORS, SWITCH-DISCONNECTORS AND EARTHING SWITCHES
EN 50123-2:2003 Railway applications - Fixed installations - D.C. switchgear - Part 2: D.C. circuit breakers
EN 60464-2:2001/A1:2006 VARNISHES USED FOR ELECTRICAL INSULATION - PART 2: METHODS OF TEST
EN 60243-3:2014 Electric strength of insulating materials - Test methods - Part 3: Additional requirements for 1,2/50 µs impulse tests
EN 60672-2:2000 Ceramic and glass insulating materials - Part 2: Methods of test
EN 61400-24:2010 Wind turbines - Part 24: Lightning protection
EN 60371-2:2004 Specification for insulating materials based on mica - Part 2: Methods of test
EN 60544-2:2012 Electrical insulating materials - Determination of the effects of ionizing radiation on insulating materials - Part 2: Procedures for irradiation and test
EN 60371-3-9 : 1995 AMD 1 2007 INSULATING MATERIALS BASED ON MICA - PART 3: SPECIFICATIONS FOR INDIVIDUAL MATERIALS - SHEET 9: MOULDING MICANITE
EN 60455-2:2015 Resin based reactive compounds used for electrical insulation - Part 2: Methods of test
EN 60641-2:2004 Pressboard and presspaper for electrical purposes - Part 2: Methods of tests
EN 61241-18:2004 Electrical apparatus for use in the presence of combustible dust - Part 18: Protection by encapsulation "mD"
EN 50123-3:2003/A1:2013 RAILWAY APPLICATIONS - FIXED INSTALLATIONS - D.C. SWITCHGEAR - PART 3: INDOOR D.C. DISCONNECTORS, SWITCH-DISCONNECTORS AND EARTHING SWITCHES

IEC 60212:2010 Standard conditions for use prior to and during the testing of solid electrical insulating materials
IEC 60684-2:2011 Flexible insulating sleeving - Part 2: Methods of test
ISO 293:2004 Plastics — Compression moulding of test specimens of thermoplastic materials
EN 60464-2:2001/A1:2006 VARNISHES USED FOR ELECTRICAL INSULATION - PART 2: METHODS OF TEST
IEC 60455-2:2015 Resin based reactive compounds used for electrical insulation - Part 2: Methods of test
ISO 294-3:2002 Plastics Injection moulding of test specimens of thermoplastic materials Part 3: Small plates
EN 60684-2:2011 Flexible insulating sleeving - Part 2: Methods of test
IEEE 930 : 2004 GUIDE FOR THE STATISTICAL ANALYSIS OF ELECTRICAL INSULATION BREAKDOWN DATA
ISO 295:2004 Plastics — Compression moulding of test specimens of thermosetting materials
EN 61099:2010 Insulating liquids - Specifications for unused synthetic organic esters for electrical purposes
IEC 61099:2010 Insulating liquids - Specifications for unused synthetic organic esters for electrical purposes
EN ISO 293:2005 Plastics - Compression moulding of test specimens of thermoplastic materials (ISO 293:2004)
IEC 60836:2015 Specifications for unused silicone insulating liquids for electrotechnical purposes
IEC 60296:2012 RLV Fluids for electrotechnical applications - Unused mineral insulating oils for transformers and switchgear
EN 60296:2012 Fluids for electrotechnical applications - Unused mineral insulating oils for transformers and switchgear
EN 60836:2015 Specifications for unused silicone insulating liquids for electrotechnical purposes
EN ISO 295 : 2004 PLASTICS - COMPRESSION MOULDING OF TEST SPECIMENS OF THERMOSETTING MATERIALS
ISO 294-1:2017 Plastics — Injection moulding of test specimens of thermoplastic materials — Part 1: General principles, and moulding of multipurpose and bar test specimens
EN 60455-2:2015 Resin based reactive compounds used for electrical insulation - Part 2: Methods of test
IEC 60674-2:2016 Specification for plastic films for electrical purposes - Part 2: Methods of test
IEC 62539:2007 Guide for the statistical analysis of electrical insulation breakdown data
EN 60212:2011 Standard conditions for use prior to and during the testing of solid electrical insulating materials
IEC 60464-2:2001+AMD1:2006 CSV Varnishes used for electrical insulation - Part 2: Methods of test
EN ISO 294-1:2017 Plastics - Injection moulding of test specimens of thermoplastic materials - Part 1: General principles, and moulding of multipurpose and bar test specimens (ISO 294-1:2017)
EN ISO 294-3 : 2003 PLASTICS - INJECTION MOULDING OF TEST SPECIMENS OF THERMOPLASTIC MATERIALS - PART 3: SMALL PLATES

View more information
Sorry this product is not available in your region.

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.

Need help?
Call us on 131 242, then click here to start a Screen Sharing session
so we can help right away! Learn more