• There are no items in your cart
We noticed you’re not on the correct regional site. Switch to our AMERICAS site for the best experience.
Dismiss alert

IEC 60027-1:1992

Current
Current

The latest, up-to-date edition.

Letters symbols to be used in electrical technology - Part 1: General
Available format(s)

Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users

Published date

01-01-1992

Corrected and reprinted 1995-03-31.
The contents of the corrigendum of April 1993 have been included in this copy.

DevelopmentNote
Supersedes IEC 60027-1A. (07/2004) Stability Date: 2017. (09/2017)
DocumentType
Standard
Pages
121
PublisherName
International Electrotechnical Committee
Status
Current
Supersedes

DIN 32830-1:1992-01 GRAPHICAL SYMBOLS; GENERAL PRINCIPLES FOR THE FORMULATION OF GRAPHICAL SYMBOLS FOR USE ON EQUIPMENT
CEI EN 60027-7 : 2011 LETTER SYMBOLS TO BE USED IN ELECTRICAL TECHNOLOGY - PART 7: POWER GENERATION, TRANSMISSION AND DISTRIBUTION
06/30148641 DC : DRAFT SEP 2006 IEC 60050-112 ED1 - INTERNATIONAL ELECTROTECHNICAL VOCABULARY - PART 112: QUANTITIES AND UNITS
CEI UNI EN 80000-13 : 2009 QUANTITIES AND UNITS - PART 13: INFORMATION SCIENCE AND TECHNOLOGY
CEI EN 60027-6 : 2008 LETTER SYMBOLS TO BE USED IN ELECTRICAL TECHNOLOGY - PART 6: CONTROL TECHNOLOGY
BS EN 62341-1-1:2009 Organic light emitting diode (OLED) displays Generic specifications
CEI EN 61310-2 : 2008 SAFETY OF MACHINERY - INDICATION, MARKING AND ACTUATION - PART 2: REQUIREMENTS FOR MARKING
I.S. EN 60034-1:2010 ROTATING ELECTRICAL MACHINES - PART 1: RATING AND PERFORMANCE
BS CECC 43000(1982) : AMD 7315 HARMONIZED SYSTEM OF QUALITY ASSESSMENT FOR ELECTRONIC COMPONENTS: GENERIC SPECIFICATION: DIRECTLY HEATED NEGATIVE TEMPERATURE COEFFICIENT THERMISTORS
BS EN 135000:1993 Harmonized system of quality assessment for electronic components. Generic specification: travelling wave amplifier tubes
11/30170712 DC : 0 BS EN 60050-191 ED 2.0 - INTERNATIONAL ELECTROTECHNICAL VOCABULARY - PART 191: DEPENDABILITY
DIN 1313:1998-12 QUANTITIES
BS EN 170000:1999 Harmonized system of quality assessment for electronic components. Generic specification: waveguide type dielectric resonators
IEC 61045-1:1991 Fixed film resistor networks for use in electronic equipment - Part 1: Generic specification
BS ISO 31-2:1992 Quantities and units Periodic and related phenomena
CEI UNI EN 80000-6 : 2009 QUANTITIES AND UNITS - PART 6: ELECTROMAGNETISM
14/30317819 DC : 0 BS EN 60276 ED. 2 - DEFINITIONS AND NOMENCLATURE FOR CARBON BRUSHES, BRUSH-HOLDERS, COMMUTATORS AND SLIP-RINGS
BS EN 140401-801 : 2007 DETAIL SPECIFICATION: FIXED LOW POWER FILM SMD RESISTORS - RECTANGULAR - STABILITY CLASSES 0,1; 0,25; 0,5; 1
CEI EN 62341-1-1 : 2011 ORGANIC LIGHT EMITTING DIODE (OLED) DISPLAYS - PART 1-1: GENERIC SPECIFICATIONS
BS EN 60115-2:2015 Fixed resistors for use in electronic equipment Sectional specification: Leaded fixed low power film resistors
DIN EN 138000 : 1997 GENERIC SPECIFICATION; FIXED INDUCTORS FOR ELECTROMAGNETIC INTERFERENCE SUPPRESSION (INDUCTORS FOR WHICH SAFETY TESTS ARE REQUIRED)
I.S. EN 114000:1994 GENERIC SPECIFICATION: PHOTOMULTIPLIER TUBES
BS EN 80000-13:2008 Quantities and units Information science and technology
BS EN 171000:2001 Harmonized system of quality assessment for electronic components. Generic specification. Filters using waveguide type dielectric resonators
DIN EN ISO 80000-1:2013-08 Quantities and units - Part 1: General (ISO 80000-1:2009 + Cor 1:2011)
BS EN 60994:1993 Guide for field measurement of vibrations and pulsations in hydraulic machines (turbines, storage pumps and pump-turbines)
DIN 5483-2:1982-09 TIME-DEPENDENT QUANTITIES - LETTER SYMBOLS
BS EN 61143-1:1994 Specification for electrical measuring instruments. X-t recorders Definitions and requirements
BS EN 60539-1:2016 Directly heated negative temperature coefficient thermistors Generic specification
12/30258880 DC : 0 BS EN 60825-1 ED.3 - SAFETY OF LASER PRODUCTS - PART 1: EQUIPMENT CLASSIFICATION AND REQUIREMENTS
BS CECC 12000(1981) : 1981 AMD 9605 HARMONIZED SYSTEM OF QUALITY ASSESSMENT FOR ELECTRONIC COMPONENTS - GENERIC SPECIFICATION - IMAGE CONVERTER & IMAGE INTENSIFIER TUBES
BS ISO 1000:1992 SI units and recommendations for the use of their multiples and of certain other units
DD IEC/TS 61968-2:2011 Application integration at electric utilities. System interfaces for distribution management Glossary
BS EN 60255-24:2001 Electrical relays Common format for transient data exchange (COMTRADE) for power systems
03/113813 DC : 0 IEC 60034-2. ED.4 - ROTATING ELECTRICAL MACHINES - PART 2: METHODS FOR DETERMINING LOSSES AND EFFICIENCY FROM TESTS (EXCLUDING MACHINES FOR TRACTION VEHICLES)
BS EN 60027-4:2007 Letter symbols to be used in electric technology Rotating electric machines
BS 5862(1980) : 1980 AMD 10232 METHOD OF SPECIFYING INDUCTIVE VOLTAGE DIVIDERS
05/30132097 DC : DRAFT JUNE 2005 IEC 60679-1 ED 3 - QUARTZ CRYSTAL CONTROLLED OSCILLATORS OF ASSESSED QUALITY - PART 1: GENERIC SPECIFICATION
BS EN 140101:2008 Blank Detail Specification. Fixed low power film resistors
BS EN 119000:1997 Harmonized system of quality assessment for electronic components. Generic specification: dry and mercury wetted reed contact units
BS CECC68000(1990) : AMD 9184 HARMONIZED SYSTEM OF QUALITY ASSESSMENT FOR ELECTRONIC COMPONENTS: GENERIC SPECIFICATION: QUARTZ CRYSTAL UNITS
CEI EN 60255-24 : 2003 ELECTRICAL RELAYS - PART 24: COMMON FORMAT FOR TRANSIENT DATA EXCHANGE (COMTRADE) FOR POWER SYSTEMS
I.S. 604:1984 COLD CATHODE INDICATOR TUBES (GENERIC SPECIFICATION)
I.S. HD 60027-2:2003 LETTER SYMBOLS TO BE USED IN ELECTRICAL TECHNOLOGY - PART 2: TELECOMMUNICATIONS AND ELECTRONICS
I.S. EN 168000:1994 QUARTZ CRYSTAL UNITS (GENERIC SPECIFICATION)
I.S. EN 60939-3:2015 PASSIVE FILTER UNITS FOR ELECTROMAGNETIC INTERFERENCE SUPPRESSION - PART 3: PASSIVE FILTER UNITS FOR WHICH SAFETY TESTS ARE APPROPRIATE
I.S. EN 140402-801:2015 DETAIL SPECIFICATION: FIXED LOW POWER WIREWOUND SURFACE MOUNT (SMD) RESISTORS - RECTANGULAR - STABILITY CLASSES 0,5; 1; 2
I.S. EN 60539-1:2016 DIRECTLY HEATED NEGATIVE TEMPERATURE COEFFICIENT THERMISTORS - PART 1: GENERIC SPECIFICATION
BS EN 60086-4:2015 Primary batteries Safety of lithium batteries
IEC 61253-1:1993 Piezoelectric ceramic resonators - A specification in the IEC quality assessment system for electronic components (IECQ) - Part 1: Generic specification - Qualification approval
I.S. EN 60849:1999 SOUND SYSTEMS FOR EMERGENCY PURPOSES
CSA C22.2 No. 62368-1 : 2014 AUDIO/VIDEO, INFORMATION AND COMMUNICATION TECHNOLOGY EQUIPMENT - PART 1: SAFETY REQUIREMENTS
DIN EN ISO 80000-8:2008-01 QUANTITIES AND UNITS - PART 8: ACOUSTICS
BS EN ISO 80000-8:2007 Quantities and units Acoustics
IEC 62319-1:2005 Polymeric thermistors - Directly heated positive step function temperature coefficient - Part 1: Generic specification
BS EN 60825-1:2014 Safety of laser products Equipment classification and requirements
BS EN 1658:1997 Requirements for marking of in vitro diagnostic instruments
BS CECC 11000(1980) : 1980 AMD 7600 HARMONIZED SYSTEM OF QUALITY ASSESSMENT FOR ELECTRONIC COMPONENTS - GENERIC SPECIFICATION - CATHODE RAY TUBES
13/30238229 DC : 0 BS EN 62052-31 - ELECTRICITY METERING EQUIPMENT (AC) - GENERAL REQUIREMENTS, TEST AND TEST CONDITIONS - PART 31: PRODUCT SAFETY REQUIREMENTS
IEC 60139:2000 Preparation of outline drawings for cathode-ray tubes, their components, connections and gauges
EN 62052-31:2016 Electricity metering equipment (AC) - General requirements, tests and test conditions - Part 31: Product safety requirements and tests
BS 4743:1979 Specification for safety requirements for electronic measuring apparatus
EN 60034-22:2009 Rotating electrical machines - Part 22: AC generators for reciprocating internal combustion (RIC) engine driven generating sets
EN 140402-801:2015 Detail specification: Fixed low power wirewound surface mount (SMD) resistors - Rectangular - Stability classes 0,5; 1; 2
EN 134000:1994 Generic Specification: Variable capacitors (Qualification approval and capability approval)
EN 60034-2-1:2014 Rotating electrical machines - Part 2-1: Standard methods for determining losses and efficiency from tests (excluding machines for traction vehicles)
EN 140101:2008 Blank Detail Specification: Fixed low power film resistors
EN 129000:1993/A1:1995 GENERIC SPECIFICATION - FIXED RF WOUND INDUCTORS
EN 60115-2:2015 Fixed resistors for use in electronic equipment - Part 2: Sectional specification: Leaded fixed low power film resistors
EN 60027-2:2007 Letter symbols to be used in electrical technology - Part 2: Telecommunications and electronics
EN 135000:1992 Generic Specification: Travelling wave amplifier tubes
EN 140401:2009 Blank Detail Specification: Fixed low power film surface mount (SMD) resistors
EN 80000-6:2008 Quantities and units - Part 6: Electromagnetism
EN 140402:2015/A1:2016 BLANK DETAIL SPECIFICATION: FIXED LOW POWER WIREWOUND SURFACE MOUNT (SMD) RESISTORS
EN 62319-1:2005 Polymeric thermistors - Directly heated positive step function temperature coefficient - Part 1: Generic specification
EN 171000:2001 Generic specification: Filters using waveguide type dielectric resonators
DEFSTAN 61-14(PT7)/1(1990) : 1990 PRECISION INSTRUMENT, ROTATING, SERVOCOMPONENTS - PART 7: INSTALLATION CONVENTIONS
EN 114000:1991 Generic Specification: Photomultiplier tubes
OVE/ONORM EN 60027-2 : 2007 LETTER SYMBOLS TO BE USED IN ELECTRICAL TECHNOLOGY - PART 2: TELECOMMUNICATIONS AND ELECTRONICS
DEFSTAN 61-14(PT5)/1(1985) : 1985 PRECISION INSTRUMENT, ROTATING, SERVO-COMPONENTS - PART 5: MOTORS, STEPPING, D.C.
DEFSTAN 59-27(PT1)/2(1990) : 1990 PRECISION INSTRUMENT, ROTATING, SERVOCOMPONENTS - GENERAL REQUIREMENTS AND COMMON TESTS FOR SERVOCOMPONENTS
BS CECC 90000:1991 Harmonized system of quality assessment for electronic components. Generic specification: monolithic integrated circuits
DEFSTAN 61-14(PT2)/2(1990) : 1990 PRECISION INSTRUMENT, ROTATING, SERVOCOMPONENTS - PART 2: MOTORS, CONTROL AC (SERVOMOTORS, TWO-PHASE INDUCTION)
DEFSTAN 61-14(PT1)/2(1990) : 1990 PRECISION INSTRUMENT, ROTATING, SERVOCOMPONENTS - PART 1: GENERAL REQUIREMENTS AND COMMON TESTS FOR SERVOCOMPONENTS
DEFSTAN 61-14(PT9)/1(1988) : 1988 PRECISION INSTRUMENT, ROTATING, SERVOCOMPONENTS - PART 9: MOTORS, TORQUE, D.C.
BS CECC 90000:1985 Harmonized system of quality assessment for electronic components. Generic specification: monolithic integrated circuits
DEFSTAN 61-14(PT10)/1(1989) : 1989 PRECISION INSTRUMENT, ROTATING, SERVO-COMPONENTS - PART 10: GEARHEADS
EN 113000:1991 Generic Specification: Camera tubes
EN 168000 : 1993 AMD 2 1998 GENERIC SPECIFICATION - QUARTZ CRYSTAL UNITS
IEC 60115-2:2014 Fixed resistors for use in electronic equipment - Part 2: Sectional specification: Leaded fixed low power film resistors
10/30237986 DC : 0 BS EN 140401-804 - DETAIL SPECIFICATION: FIXED LOW POWER FILM HIGH STABILITY SMD RESISTORS - RECTANGULAR - STABILITY CLASSES 0,1; 0,25
04/30113282 DC : DRAFT MAY 2004 IEC 62341-1 F2 ED.1 - ORGANIC LIGHT EMITTING DIODE DISPLAYS - PART 1: TERMINOLOGY
15/30300738 DC : DRAFT MAY 2015 BS EN 60027-2 ED 4.0 - LETTER SYMBOLS TO BE USED IN ELECTRICAL TECHNOLOGY - PART 2: TELECOMMUNICATIONS AND ELECTRONICS
06/30157868 DC : 0 BS EN 60393-1 - POTENTIOMETERS FOR USE IN ELECTRONIC EQUIPMENT - PART 1: GENERIC SPECIFICATION
DIN EN 190000:1996-05 GENERIC SPECIFICATION - MONOLITHIC INTEGRATED CIRCUITS
BS EN 169000:1993 Harmonized system of quality assessment for electronic components. Generic specification. Quartz crystal controlled oscillators
BS EN 129000:1996 Harmonized system of quality assessment for electronic components. Generic specification. Fixed RF wound inductors
BS EN 60115-8:2012 Fixed resistors for use in electronic equipment Sectional specification. Fixed surface mount resistors
NF EN 60027-7 : 2011 LETTER SYMBOLS TO BE USED IN ELECTRICAL TECHNOLOGY - PART 7: POWER GENERATION, TRANSMISSION AND DISTRIBUTION
AHRI 130 : 1988 GRAPHIC ELECTRICAL/ELECTRONIC SYMBOLS FOR AIR-CONDITIONING AND REFRIGERATING EQUIPMENT
BS CECC 25000:1977 Specification for harmonized system of quality assessment for electronic components: generic specification: inductor and transformer cores for telecommunications
BS CECC14000(1984) : 1984 AMD 7575 HARMONIZED SYSTEM OF QUALITY ASSESSMENT FOR ELECTRONIC COMPONENTS: GENERIC SPECIFICATION: PHOTOMULTIPLIER TUBES
BS EN 62319-1:2005 Polymeric thermistors. Directly heated positive step function temperature coefficient Generic specification
BS QC 420000:1992 Harmonized system of quality assessment for electronic components. Varistors for use in electronic equipment: generic specification
BS EN 61747-1:2000 Liquid crystal and solid-state display devices Generic specification
DIN 5483-1:1983-06 TIME-DEPENDENT QUANTITIES - TERMS FOR THE TIME-DEPENDENCY
PD IEC TR 60825-14:2004 Safety of laser products A user\'s guide
BS EN 60027-2:2007 Letter symbols to be used in electrical technology Telecommunications and electronics
BS EN 137000:1996 Harmonized system of quality assessment for electronic components. Generic specification: Fixed aluminium electrolytic a.c. capacitors with non-solid electrolyte for use with motors
BS 7477:1991 Guide for general principles for the creation of graphical symbols for use on equipment
08/30140577 DC : DRAFT JULY 2008 BS EN 60027-7 - LETTER SYMBOLS TO BE USED IN ELECTRICAL TECHNOLOGY - PART 7: POWER GENERATION, TRANSMISSION AND DISTRIBUTION
BS QC 390000:1992 Harmonized system of quality assessment for electronic components. Fixed film resistor networks for use in electronic equipment. Generic specification
09/30207307 DC : 0 BS EN 60115-2 - FIXED RESISTORS FOR USE IN ELECTRONIC EQUIPMENT - PART 2: SECTIONAL SPECIFICATION: FIXED LOW-POWER NON-WIREWOUND RESISTORS
03/314031 DC : DRAFT AUG 2003 BS ISO 7176-26 - WHEELCHAIRS - PART 26: VOCABULARY
07/30065083 DC : DRAFT JUNE 2007 BS EN 60027-4 - LETTER SYMBOLS TO BE USED IN ELECTRICAL TECHNOLOGY - PART 4: ROTATING ELECTRIC MACHINES
I.S. EN 135000:1994 TRAVELLING WAVE AMPLIFIER TUBES (GENERIC SPECIFICATION)
BS EN 117000:1997 Harmonized system of quality assessment for electronic components. Generic specification. Solid state all-or-nothing relays. Generic data and methods of test
CEI EN 60034-1 : 2015 ROTATING ELECTRICAL MACHINES - PART 1: RATING AND PERFORMANCE
BS EN 62099:2001 Fibre optic wavelength switches. Generic specification
04/30118550 DC : DRAFT AUG 2004 IEC 60050-394 ED 2 - INTERNATIONAL ELECTROTECHNICAL VOCABULARY - PART 394: NUCLEAR INSTRUMENTATION - INSTRUMENTS
CEI EN 60393-1 : 2010 POTENTIOMETERS FOR USE IN ELECTRONIC EQUIPMENT - PART 1: GENERIC SPECIFICATION
BS CECC 19000:1979 Harmonized system of quality assessment for electronic components: generic specification: dry reed make contact units
I.S. EN 60115-8-1:2015 FIXED RESISTORS FOR USE IN ELECTRONIC EQUIPMENT - PART 8-1: BLANK DETAIL SPECIFICATION: FIXED SURFACE MOUNT (SMD) LOW POWER FILM RESISTORS FOR GENERAL ELECTRONIC EQUIPMENT, CLASSIFICATION LEVEL G
I.S. EN 140101:2008 BLANK DETAIL SPECIFICATION: FIXED LOW POWER FILM RESISTORS
IEC 60050-151:2001 International Electrotechnical Vocabulary (IEV) - Part 151: Electrical and magnetic devices
I.S. EN 140402:2015 BLANK DETAIL SPECIFICATION: FIXED LOW POWER WIREWOUND SURFACE MOUNT (SMD) RESISTORS
BS EN 138000:1997 Harmonized system of quality assessment for electronic components. Generic specification: fixed inductors for electromagnetic interference suppression (inductors for which safety tests are required)
I.S. EN 140401-802:2007 DETAIL SPECIFICATION: FIXED LOW POWER FILM SMD RESISTORS - RECTANGULAR - STABILITY CLASSES 1; 2
I.S. EN 60115-8:2012 FIXED RESISTORS FOR USE IN ELECTRONIC EQUIPMENT - PART 8: SECTIONAL SPECIFICATION - FIXED SURFACE MOUNT RESISTORS (IEC 60115-8:2009 (MOD))
I.S. EN 60027-2:2007 LETTER SYMBOLS TO BE USED IN ELECTRICAL TECHNOLOGY - PART 2: TELECOMMUNICATIONS AND ELECTRONICS
CEI EN 60139 : 2003 PREPARATION OF OUTLINE DRAWINGS FOR CATHODE-RAY TUBES, THEIR COMPONENTS, CONNECTIONS AND GAUGES
I.S. EN 140401:2009 BLANK DETAIL SPECIFICATION: FIXED LOW POWER FILM SURFACE MOUNT (SMD) RESISTORS
IEC 60539-1:2016 Directly heated negative temperature coefficient thermistors - Part 1: Generic specification
NFC 01 482 : 2004 AMD 1 2016 ELECTROTECHNICAL VOCABULARY - PART 482: PRIMARY AND SECONDARY CELLS AND BATTERIES
IEC 60115-8-1:2014 Fixed resistors for use in electronic equipment - Part 8-1: Blank detail specification: Fixed surface mount (SMD) low power film resistors for general electronic equipment, classification level G
I.S. EN 140100:2008 SECTIONAL SPECIFICATION: FIXED LOW POWER FILM RESISTORS
IEC 60050-101:1998 International Electrotechnical Vocabulary (IEV) - Part 101: Mathematics
IEC 60050-394:2007 International Electrotechnical Vocabulary (IEV) - Part 394: Nuclear instrumentation - Instruments, systems, equipment and detectors
IEC 61156-1-1:2001 Multicore and symmetrical pair/quad cables for digital communications - Part 1-1: Capability Approval - Generic specification
I.S. EN 60034-2-1:2014 ROTATING ELECTRICAL MACHINES - PART 2-1: STANDARD METHODS FOR DETERMINING LOSSES AND EFFICIENCY FROM TESTS (EXCLUDING MACHINES FOR TRACTION VEHICLES)
IEC 61261-1:1994 Piezoelectric ceramic filters for use in electronic equipment - A specification in the IEC quality assessment system for electronic components (IECQ) - Part 1: Generic specification - Qualification approval
IEC 60050-103:2009 International Electrotechnical Vocabulary (IEV) - Part 103: Mathematics - Functions
ISO 80000-1:2009 Quantities and units — Part 1: General
EN 60825-1:2014/AC:2017-06 SAFETY OF LASER PRODUCTS - PART 1: EQUIPMENT CLASSIFICATION AND REQUIREMENTS (IEC 60825-1:2014)
NEMA EW 4-2009 GRAPHIC SYMBOLS FOR ARC WELDING AND CUTTING APPARATUS
BS 5555:1981 Specification for SI units and recommendations for the use of their multiples and of certain other units
BS 5555:1993 Specification for SI units and recommendations for the use of their multiples and of certain other units
BS CECC 63000:1990 Harmonized system of quality assessment for electronic components. Generic specification: film and hybrid integrated circuits
BS 5775-5:1993 Specification for quantities, units and symbols Electricity and magnetism
BS 5775-2:1993 Specification for quantities, units and symbols Periodic and related phenomena
BS 4308:1979 Specification for documentation to be supplied with electronic measuring apparatus
BS CECC 22000:1993 Harmonized system of quality assessment for electronic components. Generic specification. Radio frequency coaxial connectors (Parts I, II and III)
BS CECC17000(1992) : 1992 AMD 9626 HARMONIZED SYSTEM OF QUALITY ASSESSMENT FOR ELECTRONIC COMPONENTS - GENERIC SPECIFICATION - SOLID STATE ALL OR NOTHING RELAYS - GENERIC DATA AND METHODS OF TEST
BS CECC 16000:1980 Harmonized system of quality assessment for electronic components. Generic specification: electromechanical all-or-nothing relays
BIS IS/IEC 80000-6 : 2008 QUANTITIES AND UNITS - PART 6: ELECTROMAGNETISM
17/30347375 DC : 0 BS EN 62368-1 ED 3.0 - AUDIO/VIDEO; INFORMATION AND COMMUNICATION TECHNOLOGY EQUIPMENT - PART 1: SAFETY REQUIREMENTS
BS CECC 64000:1990 Harmonized system of quality assessment for electronic components: generic specification: film resistor networks
13/30287806 DC : 0 BS EN 60539-1 - DIRECTLY HEATED NEGATIVE TEMPERATURE COEFFICIENT THERMISTORS - PART 1: GENERIC SPECIFICATION
PD IEC/TS 62720:2017 Identification of units of measurement for computer-based processing
06/30153438 DC : DRAFT JULY 2006 BS IEC 60539-1 ED.2 - DIRECTLY HEATED NEGATIVE TEMPERATURE COEFFICIENT THERMISTORES - PART 1: GENERIC SPECIFICATION
05/30126393 DC : DRAFT SEP 2005 BS ISO/IEC 80000-8 - QUANTITIES AND UNITS - PART 8: ACOUSTICS
BS EN 60034-2-1:2014 Rotating electrical machines Standard methods for determining losses and efficiency from tests (excluding machines for traction vehicles)
CEI EN 60115-8-1 : 2016 FIXED RESISTORS FOR USE IN ELECTRONIC EQUIPMENT - PART 8-1: BLANK DETAIL SPECIFICATION: FIXED SURFACE MOUNT (SMD) LOW POWER FILM RESISTORS FOR GENERAL ELECTRONIC EQUIPMENT, CLASSIFICATION LEVEL G
97/231700 DC : DRAFT DEC 1997 IEC 60115-1 - FIXED RESISTORS FOR USE IN ELECTRONIC EQUIPMENT - PART 1: GENERIC SPECIFICATION
BS CECC 22000:1980 Harmonized system of quality assessment for electronic components: generic specification: radio frequency coaxial connectors
BS EN 60034-22:2009 Rotating electrical machines AC generators for reciprocating internal combustion (RIC) engine driven generating sets
BS EN 140401-803 : 2007 DETAIL SPECIFICATION: FIXED LOW POWER FILM SMD RESISTORS - CYLINDRICAL - STABILITY CLASSES 0,05; 0,1; 0,25; 0,5; 1; 2
BS QC420101(1992) : 1992 VARISTORS FOR USE IN ELECTRONIC EQUIPMENT - BLANK DETAIL SPECIFICATION FOR SILICON CARBIDE SURGE SUPPRESSION VARISTORS - ASSESSMENT LEVEL E
BS EN 60825:1992 Radiation safety of laser products, equipment classification, requirements and user\'s guide
09/30209389 DC : 0 BS EN 60115-8-1 - FIXED RESISTORS FOR USE IN ELECTRONIC EQUIPMENT - PART 8-1: BLANK DETAIL SPECIFICATION - FIXED CHIP RESISTORS - ASSESSMENT LEVEL E
BS EN 61030:1993 Specification for domestic digital bus (D2B) for audio, video and audiovisual systems
I.S. EN 60115-2:2015 FIXED RESISTORS FOR USE IN ELECTRONIC EQUIPMENT - PART 2: SECTIONAL SPECIFICATION: LEADED FIXED LOW POWER FILM RESISTORS
04/30117615 DC : DRAFT AUG 2004 IEC 61310-2 - SAFETY OF MACHINERY - INDICATION, MARKING AND ACTUATION - PART 2: REQUIREMENTS FOR MARKING
BS 7192:1989 Specification for radiation safety of laser products
10/30234803 DC : 0 BS EN 61169-1 ED.2 - RADIO FREQUENCY CONNECTORS - PART 1: GENERIC SPECIFICATION - GENERAL REQUIREMENTS AND MEASURING METHODS
I.S. EN 60034-22:2009 ROTATING ELECTRICAL MACHINES - PART 22: AC GENERATORS FOR RECIPROCATING INTERNAL COMBUSTION (RIC) ENGINE DRIVEN GENERATING SETS
BS EN 168000:1996 Harmonized system of quality assessment for electronic components. Generic specification: quartz crystal units
I.S. EN 138000:1998 FIXED INDUCTORS FOR ELECTROMAGNETIC INTERFERENCE SUPPRESSION (INDUCTORS FOR WHICH SAFETY TESTS ARE REQUIRED) (GENERIC SPECIFICATION)
UNI CEI EN 80000-13 : 2009 QUANTITIES AND UNITS - PART 13: INFORMATION SCIENCE AND TECHNOLOGY
14/30317306 DC : 0 BS EN 60115-8-1:2014+A1 - FIXED RESISTORS FOR USE IN ELECTRONIC EQUIPMENT - PART 8-1: BLANK DETAIL SPECIFICATION: FIXED SURFACE MOUNT (SMD) LOW POWER FILM RESISTORS FOR GENERAL ELECTRONIC EQUIPMENT, CLASSIFICATION LEVEL G
UNE-EN 60034-1:2011 Rotating electrical machines - Part 1: Rating and performance
BS EN 60034-1:2010 Rotating electrical machines Rating and performance
DIN EN ISO 80000-1 E : 2013 QUANTITIES AND UNITS - PART 1: GENERAL (ISO 80000-1:2009 + COR 1:2011)
I.S. EN 136000:1994 MAGNETRONS (GENERIC SPECIFICATION)
IEC PAS 60050-732:2007 International Electrotechnical Vocabulary (IEV) - Part 732: Computer network technology
IEC TR 62711:2011 MNEMONICS AND DESIGNATIONS OF SYMBOLS FOR MEASURING RELAYS, INSTRUMENTS AND RELATED DEVICE
BS EN 60115-1 : 2011 FIXED RESISTORS FOR USE IN ELECTRONIC EQUIPMENT - PART 1: GENERIC SPECIFICATION
BS EN 167000:1993 Harmonized system of quality assessment for electronic components. Generic specification: piezoelectric filters
BS EN 140402 : 2015 BLANK DETAIL SPECIFICATION: FIXED LOW POWER WIREWOUND SURFACE MOUNT (SMD) RESISTORS
I.S. EN 140401-804:2011 DETAIL SPECIFICATION: FIXED LOW POWER FILM HIGH STABILITY SMD RESISTORS - RECTANGULAR - STABILITY CLASSES 0,1; 0,25
I.S. EN 60027-6:2007 LETTER SYMBOLS TO BE USED IN ELECTRICAL TECHNOLOGY - PART 6: CONTROL TECHNOLOGY
I.S. EN 140101-806:2009 DETAIL SPECIFICATION: FIXED LOW POWER FILM RESISTORS - METAL FILM RESISTORS ON HIGH GRADE CERAMIC, CONFORMAL COATED OR MOLDED, AXIAL OR PREFORMED LEADS
BS EN 140401-804 : 2011 DETAIL SPECIFICATION: FIXED LOW POWER FILM HIGH STABILITY SMD RESISTORS - RECTANGULAR - STABILITY CLASSES 0,1; 0,25
BS EN 140401:2009 Blank Detail Specification. Fixed low power film surface mount (SMD) resistors
I.S. EN 133000:1998 PASSIVE FILTER UNITS FOR ELECTROMAGNETIC INTERFERENCE SUPPRESSION (GENERIC SPECIFICATION)
IEC 60050-131:2002 International Electrotechnical Vocabulary (IEV) - Part 131: Circuit theory
NFC 01 101 : 1999 ELECTROTECHNICAL VOCABULARY - CHAPTER 101: MATHEMATICS
IEC TS 62720:2017 Identification of units of measurement for computer-based processing
I.S. EN 60393-1:2009 POTENTIOMETERS FOR USE IN ELECTRONIC EQUIPMENT - PART 1: GENERIC SPECIFICATION
IEC 60115-8:2009 Fixed resistors for use in electronic equipment - Part 8: Sectional specification - Fixed surface mount resistors
I.S. EN 62319-1:2005 POLYMERIC THERMISTORS - DIRECTLY HEATED POSITIVE STEP FUNCTION TEMPERATURE COEFFICIENT - PART 1: GENERIC SPECIFICATION
IEC TS 61968-2:2011 Application integration at electric utilities - System interfaces for distribution management - Part 2: Glossary
IEC 60050-521:2002 International Electrotechnical Vocabulary (IEV) - Part 521: Semiconductor devices and integrated circuits
IEC 62368-1:2014 Audio/video, information and communication technology equipment - Part 1: Safety requirements
IEC 60393-1:2008 Potentiometers for use in electronic equipment - Part 1: Generic specification
I.S. EN 61310-2:2008 SAFETY OF MACHINERY - INDICATION, MARKING AND ACTUATION - PART 2: REQUIREMENTS FOR MARKING
IEC 60747-10:1991 Semiconductor devices - Part 10: Generic specification for discrete devices and integrated circuits
I.S. EN 60115-1:2011 FIXED RESISTORS FOR USE IN ELECTRONIC EQUIPMENT - PART 1: GENERIC SPECIFICATION (IEC 60115-1:2008, MODIFIED)
I.S. EN 113000:1994 GENERIC SPECIFICATION: CAMERA TUBES
IEC 60050-393:2003 International Electrotechnical Vocabulary (IEV) - Part 393: Nuclear instrumentation - Physical phenomena and basic concepts
IEC 60034-22:2009 Rotating electrical machines - Part 22: AC generators for reciprocating internal combustion (RIC) engine driven generating sets
BS EN 60617-13:1993 Graphical symbols for diagrams Analogue elements
UNE-EN 60825-1:2015 Safety of laser products - Part 1: Equipment classification and requirements
IEC 60027-2:2005 Letter symbols to be used in electrical technology - Part 2: Telecommunications and electronics
04/30117451 DC : DRAFT JUL 2004 IEC 60086-4. ED.3 - PRIMARY BATTERIES - PART 4: SAFETY OF LITHIUM BATTERIES
I.S. EN 60825-1:2014 SAFETY OF LASER PRODUCTS - PART 1: EQUIPMENT CLASSIFICATION AND REQUIREMENTS
EN 140401-804:2011/A1:2013 DETAIL SPECIFICATION: FIXED LOW POWER FILM HIGH STABILITY SMD RESISTORS - RECTANGULAR - STABILITY CLASSES 0,1; 0,25
UNI CEI EN ISO 80000-8 : 2007 QUANTITIES AND UNITS - PART 8: ACOUSTICS
EN 60086-4:2015 Primary batteries - Part 4: Safety of lithium batteries
EN 147000:1993 Generic Specification: Sockets for use with electrical relays of assessed quality
IEC GUIDE 111:2004 Electrical high-voltage equipment in high-voltage substations - Common recommendations for product standards
BS CECC36000(1978) : 1978 AMD 7581 HARMONIZED SYSTEM OF QUALITY ASSESSMENT FOR ELECTRONIC COMPONENTS: GENERIC SPECIFICATION: MAGNETRONS
BIS IS/IEC 60034-1 : 2004 AMD 1 2015 ROTATING ELECTRICAL MACHINES - PART 1: RATING AND PERFORMANCE
BS EN 80000-6:2008 Quantities and units Electromagnetism
BS EN 140100:2008 Sectional specification. Fixed low power film resistors
BS ISO 31-5:1992 Quantities and units Electricity and magnetism
BS EN 60939-3:2015 Passive filter units for electromagnetic interference suppression Passive filter units for which safety tests are appropriate
CEI EN 60027-4 : 2008 LETTER SYMBOLS TO BE USED IN ELECTRICAL TECHNOLOGY - PART 4: ROTATING ELECTRICAL MACHINES
12/30239867 DC : 0 BS EN 62368-1 - AUDIO/VIDEO, INFORMATION AND COMMUNICATION TECHNOLOGY EQUIPMENT - PART 1: SAFETY REQUIREMENTS
I.S. EN 143000:1994 THERMISTORS (GENERIC SPECIFICATION)
DIN IEC 60747-1:1987-03 SEMICONDUCTOR DEVICES; DISCRETE DEVICES AND INTEGRATED CIRCUITS; GENERAL
ISO/TR 18569:2004 Safety of machinery Guidelines for the understanding and use of safety of machinery standards
08/30186808 DC : DRAFT JULY 2008 BS EN 140401 - BLANK DETAIL SPECIFICATION - FIXED LOW POWER NON-WIRE-WOUND SURFACE MOUNT (SMD) RESISTORS
BS EN 140401-802 : 2007 DETAIL SPECIFICATION: FIXED LOW POWER FILM SMD RESISTORS - RECTANGULAR - STABILITY CLASSES 1; 2
I.S. EN ISO 80000-1:2013 QUANTITIES AND UNITS - PART 1: GENERAL (ISO 80000-1:2009 + COR 1:2011)
14/30311384 DC : 0 BS EN 60115-2:2014+A1 - FIXED RESISTORS FOR USE IN ELECTRONIC EQUIPMENT - PART 2: SECTIONAL SPECIFICATION: LEADED FIXED LOW POWER FILM RESISTORS
BS EN 61310-2:2008 Safety of machinery. Indication, marking and actuation Requirements for marking
EN 60939-3:2015/AC:2016-04 PASSIVE FILTER UNITS FOR ELECTROMAGNETIC INTERFERENCE SUPPRESSION - PART 3: PASSIVE FILTER UNITS FOR WHICH SAFETY TESTS ARE APPROPRIATE (IEC 60939-3:2015/COR1:2016)
BS EN 61007:1997 Transformers and inductors for use in electronic and telecommunication equipment. Measuring methods and test procedures
BS IEC 62341-1-1 : 2009 ORGANIC LIGHT EMITTING DIODE (OLED) DISPLAYS - PART 1-1: GENERIC SPECIFICATIONS
BS EN 133000:1997 Harmonized system of quality assessment for electronic components. Generic specification: passive filter units for electromagnetic interference suppression
BS EN 60115-8-1:2015 Fixed resistors for use in electronic equipment Blank detail specification: Fixed surface mount (SMD) low power film resistors for general electronic equipment, classification level G
06/30149145 DC : DRAFT OCT 2006 IEC 60384-1 - FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 1: GENERIC SPECIFICATION
08/30186863 DC : DRAFT JULY 2008 BS EN ISO 4414 - PNEUMATIC FLUID POWER - GENERAL RULES AND SAFETY REQUIREMENTS FOR SYSTEMS AND THEIR COMPONENTS
BS ISO 80000-1 : 2009 QUANTITIES AND UNITS - PART 1: GENERAL
BS EN 134000:1995 Harmonized system of quality assessment for electronic components. Generic specification: variable capacitors. (Qualification approval and capability approval)
BS EN 61028:1993 Specification for electrical measuring instruments. X-Y recorders
99/404110 DC : 0 BS 5775-8 - QUANTITIES AND UNITS - PART 8: ACOUSTICS
02/208665 DC : DRAFT SEP 2002 IEC 62319-1 ED.1.0 - POLYMERIC THERMISTORS - DIRECTLY HEATED POSITIVE STEP FUNCTION TEMPERATURE COEFFICIENT - PART 1: GENERIC SPECIFICATION
BS EN 130000:1994 Harmonized system of quality assessment for electronic components. Generic specification: fixed capacitors
BS EN 60027-6:2007 Letter symbols to be used in electrical technology Control technology
12/30258453 DC : 0 BS EN 62368-1 AMD - AUDIO/VIDEO, INFORMATION AND COMMUNICATION TECHNOLOGY EQUIPMENT - PART 1: SAFETY REQUIREMENTS
BS EN 60094-1:1994 Magnetic tape sound recording and reproducing systems Specification for general conditions and requirements
BS CECC 299001:1999 Technology approval schedule. Manufacture of electrical connectors
07/30126366 DC : 0 BS EN 80000-13 - QUANTITIES AND UNITS - PART 13: INFORMATION SCIENCE AND TECHNOLOGY
CEI EN 60068-2-9 : 2001 ENVIRONMENTAL TESTING - PART 2: TESTS GUIDANCE FOR SOLAR RADIATION TESTING
NF EN 60027-2 : 2007 LETTER SYMBOLS TO BE USED IN ELECTRICAL TECHNOLOGY - PART 2: TELECOMMUNICATIONS AND ELECTRONICS
NF EN 80000-6 : 2008 QUANTITIES AND UNITS - PART 6: ELECTROMAGNETISM
UNI CEI EN ISO 80000-1 : 2013 QUANTITIES AND UNITS - PART 1: GENERAL
CEI EN 62319-1 : 2005 POLYMERIC THERMISTORS - DIRECTLY HEATED POSITIVE STEP FUNCTION TEMPERATURE COEFFICIENT - PART 1: GENERIC SPECIFICATION
IEC PAS 60027-6:2004 Letter symbols to be used in electrical technology - Control technology
I.S. EN 60027-7:2010 LETTER SYMBOLS TO BE USED IN ELECTRICAL TECHNOLOGY - PART 7: POWER GENERATION, TRANSMISSION AND DISTRIBUTION
I.S. EN 62368-1:2014 AUDIO/VIDEO, INFORMATION AND COMMUNICATION TECHNOLOGY EQUIPMENT - PART 1: SAFETY REQUIREMENTS (IEC 62368-1:2014, MODIFIED)
NFC 01 141 : 2004 ELECTROTECHNICAL VOCABULARY - PART 141: POLYPHASE SYSTEMS AND CIRCUITS
I.S. EN 134000:1994 GENERIC SPECIFICATION: VARIABLE CAPACITORS (QUALIFICATION APPROVAL AND CAPABILITY APPROVAL)
NFC 01 131 : 2002 AMD 2 2014 INTERNATIONAL ELECTROTECHNICAL VOCABULARY - PART 131: CIRCUIT THEORY
HD 60027-2 : 200S1 LETTER SYMBOLS TO BE USED IN ELECTRICAL TECHNOLOGY - PART 2: TELECOMMUNICATIONS AND ELECTRONICS
I.S. CECC 33000:1994 PASSIVE FILTER UNITS FOR ELECTROMAGNETIC INTERFERENCE SUPPRESSION (GENERIC SPECIFICATION)
CEI EN 60034-22 : 2011 ROTATING ELECTRICAL MACHINES - PART 22: AC GENERATORS FOR RECIPROCATING INTERNAL COMBUSTION (RIC) ENGINE DRIVEN GENERATING SETS
EN 62368-1:2014/AC:2017-03 AUDIO/VIDEO, INFORMATION AND COMMUNICATION TECHNOLOGY EQUIPMENT - PART 1: SAFETY REQUIREMENTS (IEC 62368-1:2014, MODIFIED)
CEI UNI EN ISO 80000-8 : 2010 QUANTITIES AND UNITS - PART 8: ACOUSTICS
IEC 60034-1:2017 Rotating electrical machines - Part 1: Rating and performance
EN 140401-802:2007/A3:2017 DETAIL SPECIFICATION: FIXED LOW POWER FILM SMD RESISTORS - RECTANGULAR - STABILITY CLASSES 1; 2
I.S. EN 62341-1-1:2009 ORGANIC LIGHT EMITTING DIODE (OLED) DISPLAYS - PART 1-1: GENERIC SPECIFICATIONS
I.S. EN 140401-803:2007 DETAIL SPECIFICATION: FIXED LOW POWER FILM SMD RESISTORS - CYLINDRICAL - STABILITY CLASSES 0,05; 0,1; 0,25; 0,5; 1; 2
I.S. EN 111000:1994 GENERIC SPECIFICATION: CATHODE RAY TUBES
IEC TR 61366-1:1998 Hydraulic turbines, storage pumps and pump-turbines - Tendering Documents - Part 1: General and annexes
IEC 60050-141:2004 International Electrotechnical Vocabulary (IEV) - Part 141: Polyphase systems and circuits
EN 60539-1:2016/AC:2017-09 DIRECTLY HEATED NEGATIVE TEMPERATURE COEFFICIENT THERMISTORS - PART 1: GENERIC SPECIFICATION (IEC 60539-1:2016/COR1:2017)
EN 60115-1:2011/A11:2015 FIXED RESISTORS FOR USE IN ELECTRONIC EQUIPMENT - PART 1: GENERIC SPECIFICATION
IEC 62052-31:2015 Electricity metering equipment (AC) - General requirements, tests and test conditions - Part 31: Product safety requirements and tests
I.S. EN ISO 80000-8:2007 QUANTITIES AND UNITS - PART 8: ACOUSTICS
ISO 31-2:1992 Quantities and units Part 2: Periodic and related phenomena
IEC TS 62850:2013 Safety requirements for electrical equipment for measurement, control, and laboratory use - General requirements for equipment intended to be used in educational establishments by children
EN ISO 80000-8 : 2007 QUANTITIES AND UNITS - PART 8: ACOUSTICS
IEC 80000-6:2008 Quantities and units - Part 6: Electromagnetism
IEC 60027-4:2006 Letter symbols to be used in electrical technology - Part 4: Rotating electric machines
IEC 61747-1:1998+AMD1:2003 CSV Liquid crystal and solid-state display devices - Part 1: Generic specification
IEC 62341-1-1:2009 Organic light emitting diode (OLED) displays - Part 1-1: Generic specifications
IEC 80000-13:2008 Quantities and units - Part 13: Information science and technology
IEC 60416:1988 General principles for the formulation of graphical symbols
IEC 61310-2:2007 Safety of machinery - Indication, marking and actuation - Part 2: Requirements for marking
IEC 60825-1:2014 Safety of laser products - Part 1: Equipment classification and requirements
IEC 62099:2001 Fibre optic wavelength switches - Generic specification
IEC 60034-2-1:2014 Rotating electrical machines - Part 2-1: Standard methods for determining losses and efficiency from tests (excluding machines for traction vehicles)
BS EN 140402-801:2015 Detail specification: Fixed low power wirewound surface mount (SMD) resistors. Rectangular. Stability classes 0,5; 1; 2
13/30267440 DC : 0 BS EN 60086-4 ED 4.0 - PRIMARY BATTERIES - PART 4: SAFETY OF LITHIUM BATTERIES
ISO 80000-8:2007 Quantities and units Part 8: Acoustics
IEC 60027-6:2006 Letter symbols to be used in electrical technology - Part 6: Control technology
BS EN 62052-31:2016 Electricity metering equipment (AC). General requirements, tests and test conditions Product safety requirements and tests
IEC 60027-7:2010 Letter symbols to be used in electrical technology - Part 7: Power generation, transmission and distribution
IEC 60086-4:2014 Primary batteries - Part 4: Safety of lithium batteries
EN 60027-4:2007 Letter symbols to be used in electrical technology - Part 4: Rotating electrical machines
EN 136000:1992 Generic Specification: Magnetrons
EN 60027-6:2007 Letter symbols to be used in elecrical technology - Part 6: Control technology
EN 60825 : 1991 RADIATION SAFETY OF LASER PRODUCTS, EQUIPMENT CLASSIFICATION, REQUIREMENTS AND USER'S GUIDE
EN ISO 80000-1:2013 Quantities and units - Part 1: General (ISO 80000-1:2009 + Cor 1:2011)
BS CECC 13000(1981) : 1981 AMD 7573 HARMONIZED SYSTEM OF QUALITY ASSESSMENT FOR ELECTRONIC COMPONENTS - GENERIC SPECIFICATION - CAMERA TUBES
I.S. EN 80000-6:2008 QUANTITIES AND UNITS - PART 6: ELECTROMAGNETISM
BS CECC 16000-1:1992 Harmonized system of quality assessment for electronic components. Generic specification: electromechanical all-or-nothing relays General
CEI EN 62368-1 : 2016 AUDIO/VIDEO, INFORMATION AND COMMUNICATION TECHNOLOGY EQUIPMENT - PART 1: SAFETY REQUIREMENTS
07/30161439 DC : DRAFT JAN 2007 IEC 60050-103 - INTERNATIONAL ELECTROTECHNICAL VOCABULARY - PART 103: MATHEMATICS - FUNCTIONS
BS EN 60393-1:2009 Potentiometers for use in electronic equipment Generic specification
CEI EN 60115-2 : 2016 FIXED RESISTORS FOR USE IN ELECTRONIC EQUIPMENT - PART 2: SECTIONAL SPECIFICATION: LEADED FIXED LOW POWER FILM RESISTORS
DIN 5493-1:1993-02 LOGARITHMIC QUANTITIES AND UNITS; BASIC CONCEPTS; QUANTITIES AND UNITS OF INFORMATION THEORY
BS IEC 60050-101:1998 International electrotechnical vocabulary Mathematics
CEI EN 140401 : 2009 BLANK DETAIL SPECIFICATION: FIXED LOW POWER FILM SURFACE MOUNT (SMD) RESISTORS
UNI CEI ISO 80000-1 : 2010 QUANTITIES AND UNITS - PART 1: GENERAL
IEEE 270-2006 IEEE Standard Definitions for Selected Quantities, Units, and Related Terms, with Special Attention to the International System of Units (SI)
CEI EN 138000 : 1996 GENERIC SPECIFICATION: FIXED INDUCTORS FOR ELECTROMAGNETIC INTERFERENCE SUPPRESSION (INDUCTORS FOR WHICH SAFETY TESTS ARE REQUIRED)
PD IEC/TR 62711:2011 Mnemonics and designations of symbols for measuring relays, instruments and related device
CEI EN 60115-8 : 2013 FIXED RESISTORS FOR USE IN ELECTRONIC EQUIPMENT - PART 8: SECTIONAL SPECIFICATION - FIXED SURFACE MOUNT RESISTORS
CEI 76-11 : 2011 SAFETY OF LASER PRODUCTS - PART 14: A USER'S GUIDE
BS EN 61064:1993 Guide to acceptance tests for steam turbine speed control systems
DIN IEC 60747-10:1987-10 SEMICONDUCTOR DEVICES; GENERIC SPECIFICATION FOR SEMICONDUCTOR DEVICES AND INTEGRATED CIRCUITS
BS QC 400000:1990 Harmonized system of quality assessment for electronic components. Fixed resistors for use in electronic equipment: generic specification
BS EN 60139:2001 Preparation of outline drawings for cathode-ray tubes, their components, connections and gauges
BS EN 190000:1996 Harmonized system of quality assessment for electronic components. Generic specification: monolithic integrated circuits
NFC 01 393 : 2004 ELECTROTECHNICAL VOCABULARY - PART 393: NUCLEAR INSTRUMENTATION - PHYSICAL PHENOMENA AND BASIC CONCEPTS
BS EN 60027-7:2010 Letter symbols to be used in electrical technology Power generation, transmission and distribution
BS CECC35000(1978) : 1978 AMD 7881 HARMONIZED SYSTEM OF QUALITY ASSESSMENT FOR ELECTRONIC COMPONENTS. GENERIC SPECIFICATION: TRAVELLING WAVE AMPLIFIER TUBES
17/30361469 DC : 0 BS EN ISO 80000-8 - QUANTITIES AND UNITS - PART 8: ACOUSTICS
DIN 5483-3:1994-09 TIME-DEPENDENT QUANTITIES - PART 3: COMPLEX REPRESENTATION OF SINUSOIDAL TIME-DEPENDENT QUANTITIES
11/30175582 DC : 0 BS EN 60050-395 - INTERNATIONAL ELECTROTECHNICAL VOCABULARY - PART 395: NUCLEAR INSTRUMENTATION - PHYSICAL PHENOMENA, BASIC CONCEPTS, INSTRUMENTS, SYSTEMS, EQUIPMENT AND DETECTORS
UNE-IEC 60050-103:2012 International Electrotechnical Vocabulary (IEV) - Part 103: Mathematics - Functions
BS EN 116000-3:1996 Harmonized system of quality assessment for electronic components. Generic specification: electromechanical all-or-nothing relays Test and measurement procedures
98/230636 DC : DRAFT MARCH 98 DRAFT IEC 61010-2-031 - SAFETY REQUIREMENTS FOR ELECTRICAL EQUIPMENT FOR MEASUREMENT CONTROL AND LABORATORY USE 2-031: SAFETY REQUIREMENTS FOR HAND-HELD PROBE ASSEMBLIES FOR ELECTRICAL MEASUREMENT TEST
BS EN ISO 80000-1:2013 Quantities and units General
BS EN 116000-1:1996 Harmonized system of quality assessment for electronic components. Generic specification: electromechanical all-or-nothing relays General
07/30172547 DC : 0 BS EN 62074-1 - FIBRE OPTIC WDM DEVICES - PART 1: GENERIC SPECIFICATION
UNE-EN 60027-4:2011 Letter symbols to be used in electrical technology -- Part 4: Rotating electric machines
NF EN 61310-2 : 2008 SAFETY OF MACHINERY - INDICATION, MARKING AND ACTUATION - PART 2: REQUIREMENTS FOR MARKING
08/30182672 DC : DRAFT MAY 2008 BS EN 60034-1 - ROTATING ELECTRICAL MACHINES - PART 1: RATING AND PERFORMANCE
BIS IS/ISO 80000-8 : 2007 QUANTITIES AND UNITS - PART 8: ACOUSTICS
NFC 03 002 : 2002 LETTER SYMBOLS TO BE USED IN ELECTRICAL TECHNOLOGY - PART 2: TELECOMMUNICATIONS AND ELECTRONICS
BS QC420102(1992) : 1992 SPECIFICATIONS FOR HARMONIZED SYSTEM OF QUALITY ASSESSMENT FOR ELECTRONIC COMPONENTS - VARISTORS FOR USE IN ELECTRONIC EQUIPMENT - BLANK DETAIL SPECIFICATION: ZINC OXIDE SURGE SUPPRESSION VARISTORS - ASSESSMENT LEVEL E
08/30126370 DC : DRAFT APR 2008 BS ISO 80000-1 - QUANTITIES AND UNITS - PART 1: GENERAL
DIN 43539-5:1984-08 ACCUMULATORS; TESTS; SEALED LEAD STORAGE BATTERIES WITH GRID TYPE PLATES AND IMMOBILIZED ELECTROLYTE, MAINTENANCE FREE; TEST METHODS
BS EN 140101-806 : 2008 DETAIL SPECIFICATION: FIXED LOW POWER FILM RESISTORS - METAL FILM RESISTORS ON HIGH GRADE CERAMIC, CONFORMAL COATED OR MOLDED, AXIAL OR PREFORMED LEADS
I.S. EN 62052-31:2016 ELECTRICITY METERING EQUIPMENT (AC) - GENERAL REQUIREMENTS, TESTS AND TEST CONDITIONS - PART 31: PRODUCT SAFETY REQUIREMENTS AND TESTS
IEC 60050-482:2004 International Electrotechnical Vocabulary (IEV) - Part 482: Primary and secondary cells and batteries
NFF 70 030 : 2004 RAILWAY APPLICATIONS - FIXED INSTALLATIONS - SAFETY ELECTROMECHANICAL RELAYS - ENGINEERING AND DESIGNING RULES
NF EN 62319-1 : 2005 POLYMERIC THERMISTORS - DIRECTLY HEATED POSITIVE STEP FUNCTION TEMPERATURE COEFFICIENT - PART 1: GENERIC SPECIFICATION
UNI CEI EN 80000-6 : 2009 QUANTITIES AND UNITS - PART 6: ELECTROMAGNETISM
UNE-EN 60034-22:2010 Rotating electrical machines -- Part 22: AC generators for reciprocating internal combustion (RIC) engine driven generating sets
NF EN 60034-1 : 2011 ROTATING ELECTRICAL MACHINES - PART 1: RATING AND PERFORMANCE
I.S. EN 80000-13:2008 QUANTITIES AND UNITS - PART 13: INFORMATION SCIENCE AND TECHNOLOGY
I.S. EN 60027-4:2007 LETTER SYMBOLS TO BE USED IN ELECTRIC TECHNOLOGY - PART 4: ROTATING ELECTRIC MACHINES
IEC TR 60825-14:2004 Safety of laser products - Part 14: A user's guide
I.S. EN 140401-801:2007 DETAIL SPECIFICATION: FIXED LOW POWER FILM SMD RESISTORS - RECTANGULAR - STABILITY CLASSES 0,1; 0,25; 0,5; 1
I.S. EN 60086-4:2015 PRIMARY BATTERIES - PART 4: SAFETY OF LITHIUM BATTERIES
ISO 14617-5:2002 Graphical symbols for diagrams Part 5: Measurement and control devices
I.S. EN 116000-3:1998 GENERIC SPECIFICATION: ELECTROMECHANICAL ALL-OR-NOTHING RELAYS - PART 3: TEST AND MEASUREMENT PROCEDURES
EN 140401-803 : 2007 AMD 3 2017 DETAIL SPECIFICATION: FIXED LOW POWER FILM SMD RESISTORS - CYLINDRICAL - STABILITY CLASSES 0,05; 0,1; 0,25; 0,5; 1; 2
EN 140101-806 : 2008 COR 2014 DETAIL SPECIFICATION: FIXED LOW POWER FILM RESISTORS - METAL FILM RESISTORS ON HIGH GRADE CERAMIC, CONFORMAL COATED OR MOLDED, AXIAL OR PREFORMED LEADS
EN 140401-801:2007/A1:2013 DETAIL SPECIFICATION: FIXED LOW POWER FILM SMD RESISTORS - RECTANGULAR - STABILITY CLASSES 0,1; 0,25; 0,5; 1
IEC 60617-13:1993 Graphical symbols for diagrams - Part 13: Analogue elements
PD ISO/TR 18569:2004 Safety of machinery. Guidelines for the understanding and use of safety of machinery standards.
PD IEC/TS 62850:2013 Safety requirements for electrical equipment for measurement, control, and laboratory use. General requirements for equipment intended to be used in educational establishments by children
EN 62099:2001 Fibre optic wavelength switches - Generic specification
EN 111000 : 1991 Generic Specification: Cathode ray tubes
EN 62341-1-1:2009 Organic light emitting diode (OLED) displays - Part 1-1: Generic specifications
EN 80000-13:2008 Quantities and units - Part 13: Information science and technology
EN 119000 : 1996 HARMONIZED SYSTEM OF QUALITY ASSESSMENT FOR ELECTRONIC COMPONENTS: GENERIC SPECIFICATION: DRY AND MERCURY WETTED REED CONTACT UNITS
EN 60027-7:2010 Letter symbols to be used in electrical technology - Part 7: Power generation, transmission and distribution
EN 60115-8:2012 Fixed resistors for use in electronic equipment - Part 8: Sectional specification - Fixed surface mount resistors
EN 60034-1:2010/corrigendum Oct. 2010 ROTATING ELECTRICAL MACHINES - PART 1: RATING AND PERFORMANCE
EN 143000 : 1991 THERMISTORS (GENERIC SPECIFICATION)
EN 60617-13:1993 Graphical symbols for diagrams - Part 13: Analogue elements
EN 116000-3 : 1996 GENERIC SPECIFICATION: ELECTROMECHANICAL ALL-OR-NOTHING RELAYS - PART 3: TEST AND MEASUREMENT PROCEDURES
EN 60139:2001 Preparation of outline drawings for cathode-ray tubes, their components, connections and gauges
EN 137000:1995 Generic Specification: Fixed aluminium electrolytic a.c. capacitors with non-solid electrolyte for use with motors
EN 170000:1999 Generic Specification: Waveguide type dielectric resonators
EN 190000:1995 Generic Specification: Monolithic integrated circuits
EN 60115-8-1:2015 Fixed resistors for use in electronic equipment - Part 8-1: Blank detail specification: Fixed surface mount (SMD) low power film resistors for general electronic equipment, classification level G
EN 140100:2008 Sectional Specification: Fixed low power film resistors
EN 60393-1:2009 Potentiometers for use in electronic equipment - Part 1: Generic specification
EN 61310-2:2008 Safety of machinery - Indication, marking and actuation - Part 2: Requirements for marking
BS 6288-1(1994) : 1994 MAGNETIC TAPE SOUND RECORDING AND REPRODUCING SYSTEMS - PART 1: SPECIFICATION FOR GENERAL CONDITIONS AND REQUIREMENTS
BS 3939-13:1985 Guide for graphical symbols for electrical power, telecommunications and electronics diagrams Analogue elements
BS CECC 30000:1992 Harmonized system of quality assessment for electronic components. Generic specification: fixed capacitors
BS CECC 30000:1984 Harmonized system of quality assessment for electronic components: generic specification: fixed capacitors
CEI UNI EN IEC 80000-6:2023 Quantities and units Part 6: Electromagnetism

View more information
$565.36
Including GST where applicable

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.

Need help?
Call us on 131 242, then click here to start a Screen Sharing session
so we can help right away! Learn more