Customer Support: 131 242

  • There are no items in your cart
We noticed you’re not on the correct regional site. Switch to our AMERICAS site for the best experience.
Dismiss alert

IEC 60068-1:2013

Current
Current

The latest, up-to-date edition.

Environmental testing - Part 1: General and guidance
Available format(s)

Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users

Language(s)

English - French

Published date

07-10-2013

FOREWORD
INTRODUCTION
1 Scope
2 Normative references
3 Terms and definitions
4 Standard atmospheric conditions
5 Use of test methods
6 Climatic sequence
7 Component climatic category
8 Application of tests
9 Significance of the numerical value of a quantity
Annex A (normative) - Component climatic category
Annex B (informative) - General guidance
Annex C (informative) - Environmental test tailoring
Bibliography

IEC 60068-1:2013 includes a series of methods for environmental testing along with their appropriate severities, and prescribes various atmospheric conditions for measurements and tests designed to assess the ability of specimens to perform under expected conditions of transportation, storage and all aspects of operational use. Although primarily intended for electrotechnical products, this standard is not restricted to them and may be used in other fields where desired. Other methods of environmental testing, specific to the individual types of specimen, may be included in the relevant specifications. The framework of environmental test tailoring process is given in order to assist the production of test specifications with appropriate tests and test severities. This seventh edition cancels and replaces the sixth edition, published in 1988, and constitutes a technical revision. The main changes with respect to the previous edition are listed below:
- updated normative reference list;
- indication of normative and informative annexes;
- new informative Annex C, Environmental test tailoring.

Committee
TC 104
DevelopmentNote
Stability date: 2020. (10/2013)
DocumentType
Standard
Pages
62
PublisherName
International Electrotechnical Committee
Status
Current
Supersedes

08/30180887 DC : DRAFT MAY 2008 BS EN 50131-4 - ALARM SYSTEMS - INTRUSION AND HOLD-UP SYSTEMS - PART 4: WARNING DEVICES
BS EN 61215-2:2017 Terrestrial photovoltaic (PV) modules. Design qualification and type approval Test procedures
BS EN 61076-2-102:2002 Connectors for electronic equipment. Circular connectors Circular connectors with assessed quality. Detail specification for plugs and jacks for external low voltage power supply
08/30171597 DC : DRAFT JUNE 2008 BS EN 61753-111-7 - FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - PERFORMANCE STANDARD - PART 111-7: SEALED CLOSURES FOR CATEGORY A - AERIAL
13/30283837 DC : 0 BS EN 62812 - METHOD OF MEASUREMENT OF LOW RESISTANCE
CLC/TS 50131-2-5:2004 Alarm systems - Intrusion systems - Part 2-5: Requirements for combined passive infrared and ultrasonic detectors
NF EN 60068 2-27 : 2009 ENVIRONMENTAL TESTING - PART 2-27: TESTS - TEST EA AND GUIDANCE: SHOCK
NF EN 60384-26 : 2011 FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 26: SECTIONAL SPECIFICATION - FIXED ALUMINIUM ELECTROLYTIC CAPACITORS WITH CONDUCTIVE POLYMER SOLID ELECTROLYTE
BS EN 50131-2-7-3 : 2012 ALARM SYSTEMS - INTRUSION AND HOLD-UP SYSTEMS - PART 2-7-3: INTRUSION DETECTORS - GLASS BREAK DETECTORS (ACTIVE)
DD CLC/TS 50131-2-7-3:2009 Alarm systems. Intrusion and hold-up systems Intrusion detectors. Glass break detectors (active)
04/30095958 DC : DRAFT DEC 2004 ISO 19292 - SHIPS AND MARINE TECHNOLOGY - POINT-TYPE RESETTABLE FLAME DETECTORS FOR SHIPS
UNE-EN 60068-2-39:2016 Environmental testing - Part 2-39: Tests - Tests and guidance: Combined temperature or temperature and humidity with low air pressure tests
CEI EN 61305-1 : 1997 HOUSEHOLD HIGH-FIDELITY AUDIO EQUIPMENT AND SYSTEMS METHODS OF MEASURING AND SPECIFYING THE PERFORMANCE - PART 1: GENERAL
BS EN 140200:1997 Harmonized system of quality assessment for electronic components. Sectional specification: fixed power resistors
CEI EN 62193 : 2005 LIVE WORKING - TELESCOPIC STICKS AND TELESCOPIC MEASURING STICKS
14/30250046 DC : 0 BS EN 61076-2-111 - CONNECTORS FOR ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 2-111: CIRCULAR CONNECTORS - DETAIL SPECIFICATION FOR POWER CONNECTORS WITH M12 SCREW-LOCKING
CSA CEI/IEC 61000.4.2 : 2001 : R2009 ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-2: TESTING AND MEASUREMENT TECHNIQUES - ELECTROSTATIC DISCHARGE IMMUNITY TEST
03/320274 DC : DRAFT DEC 2003 IEC 61196-5 ED.1 - COAXIAL COMMUNICATION CABLES - PART 5: SECTIONAL SPECIFICATION FOR CATV TRUNK AND DISTRIBUTION CABLES
08/30178754 DC : DRAFT MAR 2008 BS EN 60268-7 - SOUND SYSTEM EQUIPMENT - PART 7 - HEADPHONES AND EARPHONES (GMT)
02/206148 DC : 0 IEC 60603-7-5. ED. 1.0 - CONNECTORS FOR ELECTRONIC EQUIPMENT - PART 7-5: DETAIL SPECIFICATION FOR 8-WAY, SHIELDED, FREE AND FIXED CONNECTORS, FOR DATA TRANSMISSIONS WITH FREQUENCIES UP TO 250 MHZ (CAT 6, SHIELDED)
11/30243697 DC : 0 BS IEC 62718 - RAILWAY APPLICATIONS - ROLLING STOCK - D.C. SUPPLIED ELECTRONIC BALLASTS FOR LIGHTING FLUORESCENT LAMPS
BS EN 130200:1993 Harmonized system of quality assessment for electronic components. Sectional specification: fixed tantalum capacitors with non-solid or solid electrolyte
BS EN 62137-3:2012 Electronics assembly technology Selection guidance of environmental and endurance test methods for solder joints
UNE-EN 54-22:2016 Fire detection and fire alarm system - Part 22 : Resettable line-type heat detectors
BS EN 61747-5:1998 Liquid crystal and solid-state display devices Environmental, endurance and mechanical test methods
BS EN 60068-2-1:2007 Environmental testing Tests. Test A. Cold
04/30031093 DC : DRAFT FEB 2004 ISO 4064-3 - MEASUREMENT OF WATER FLOW IN CLOSED FULLY CHARGED CONDUITS - METERS FOR COLD POTABLE WATER AND HOT WATER - PART 3: TEST METHODS AND EQUIPMENT
08/30171606 DC : DRAFT JUNE 2008 BS EN 61753-111-8 - FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - PERFORMANCE STANDARD - PART 111-8: SEALED CLOSURES FOR CATEGORY G - GROUND
BS EN 60068-3-1:2011 Environmental testing Supporting documentation and guidance. Cold and dry heat tests
DD ISO/TS 24534-2:2007 Automatic vehicle and equipment identification. Electronic registration identification (ERI) for vehicles Operational requirements
CEI EN 62137-1-4 : 2010 SURFACE MOUNTING TECHNOLOGY - ENVIRONMENTAL AND ENDURANCE TEST METHODS FOR SURFACE MOUNT SOLDER JOINT - PART 1-4: CYCLIC BENDING TEST
I.S. EN 62137-1-5:2009 SURFACE MOUNTING TECHNOLOGY - ENVIRONMENTAL AND ENDURANCE TEST METHODS FOR SURFACE MOUNT SOLDER JOINTS - PART 1-5: MECHANICAL SHEAR FATIGUE TEST
I.S. EN 62790:2015 JUNCTION BOXES FOR PHOTOVOLTAIC MODULES - SAFETY REQUIREMENTS AND TESTS
BS EN 61076-7:2001 Connectors with assessed quality, for use in d.c., low-frequency analogue and in digital high speed data applications Cable outlet accessories with assessed quality, including qualification and capability approval. Sectional specification
ISO 15003:2006 Agricultural engineering Electrical and electronic equipment Testing resistance to environmental conditions
CEI EN 60068-2-47 : 2006 ENVIRONMENTAL TESTING - PART 2-47: TESTS - MOUNTING OF SPECIMENS FOR VIBRATION, IMPACT AND SIMILAR DYNAMIC TESTS
01/204707 DC : DRAFT JUL 2001 IEC 61000-6-6 - ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 6-6: GENERIC STANDARDS - HEMP IMMUNITY FOR INDOOR EQUIPMENT
BS 7573-1.1(1992) : 1992 AMD 8338 METHODS OF MEASUREMENT FOR EQUIPMENT USED IN DIGITAL MICROWAVE RADIO TRANSMISSION SYSTEMS - MEASUREMENTS COMMON TO TERRESTRIAL RADIO-RELAY SYSTEMS AND SATELLITE EARTH STATIONS - GENERAL
I.S. EN 60384-19:2015 FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 19: SECTIONAL SPECIFICATION: FIXED METALLIZED POLYETHYLENE-TEREPHTHALATE FILM DIELECTRIC SURFACE MOUNT D.C. CAPACITORS
BS CECC 23300-003:1991 Specification for harmonized system of quality assessment for electronic components. Capability detail specification: multilayer printed boards
I.S. EN 60352-7:2002 SOLDERLESS CONNECTIONS - PART 7: SPRING CLAMP CONNECTIONS - GENERAL REQUIREMENTS, TEST METHODS AND PRACTICAL GUIDANCE
09/30212082 DC : 0
12/30266709 DC : 0 BS EN ISO 4064-2 - WATER METERS FOR COLD POTABLE WATER AND HOT WATER - PART 2: TEST METHODS
11/30205541 DC : 0 BS EN 54-7 - FIRE DETECTION AND FIRE ALARM SYSTEMS - PART 7: SMOKE DETECTORS - POINT DETECTORS USING SCATTERED LIGHT, TRANSMITTED LIGHT OR IONISATION
BS EN 60603-2:1998 Connectors for frequencies below 3 MHz for use with printed boards Detail specification for two-part connectors with assessed quality, for printed boards, for basic grid of 2,54 mm (0,1 in) with common mounting features
NF EN 60384-4 : 2016 FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 4: SECTIONAL SPECIFICATION - FIXED ALUMINIUM ELECTROLYTIC CAPACITORS WITH SOLID (MNO[2]) AND NON-SOLID ELECTROLYTE
CEI EN 60728-3 : 2011 CABLE NETWORKS FOR TELEVISION SIGNALS, SOUND SIGNALS AND INTERACTIVE SERVICES - PART 3: ACTIVE WIDEBAND EQUIPMENT FOR CABLE NETWORKS
PD IEC/TR 60721-4-2:2002 Classification of environmental conditions. Guidance for the correlation and transformation of environmental condition classes of IEC 60721-3 to the environmental tests of IEC 60068 Transportation
IEC 61045-1:1991 Fixed film resistor networks for use in electronic equipment - Part 1: Generic specification
NF EN 60393-5 : 2016 POTENTIOMETERS FOR USE IN ELECTRONIC EQUIPMENT - PART 5: SECTIONAL SPECIFICATION - SINGLE-TURN ROTARY LOW-POWER WIREWOUND AND NONWIREWOUND POTENTIOMETERS
02/206181 DC : DRAFT MAY 2002 IEC 61019-1. ED.1 - SURFACE ACOUSTIC WAVE RESONATORS (SAW) OF ASSESSED QUALITY - PART 1: GENERIC SPECIFICATION
BS 7640-1(1993) : 1993 AMD 8679 GUIDE TO HIGH-VOLTAGE TEST TECHNIQUES FOR LOW-VOLTAGE EQUIPMENT - DEFINITIONS, TEST AND PROCEDURE REQUIREMENTS
BS EN 54-28:2016 Fire detection and fire alarm system Non-resettable line-type heat detectors
BS EN 50131-2-4:2008 Alarm systems. Intrusion and hold-up systems Requirements for combined passive infrared and microwave detectors
BS EN 61811-51:2002 Electromechanical all-or-nothing relays Blank detail specification. Electromechanical all-or-nothing telecom relays of assessed quality. Non-standardized types and construction
BS EN 61076-4-115:2003 Connectors for electronic equipment. Printed board connectors with assessed quality Backplane connector for InfiniBand equipment
I.S. EN 50131-2-4:2008 ALARM SYSTEMS - INTRUSION AND HOLD-UP SYSTEMS - PART 2-4: REQUIREMENTS FOR COMBINED PASSIVE INFRARED AND MICROWAVE DETECTORS
10/30235452 DC : 0 BS EN 61988-2-5 - PLASMA DISPLAY PANELS - PART 2-5: MEASURING METHODS - ACOUSTIC NOISE
14/30295302 DC : 0 BS EN 61587-1 ED. 4.0 - MECHANICAL STRUCTURES FOR ELECTRONIC EQUIPMENT - TESTS FOR IEC 60917 AND IEC 60297 SERIES - PART 1: ENVIRONMENTAL REQUIREMENTS, TEST SET-UP AND SAFETY ASPECTS FOR CABINETS, RACKS, SUBRACKS AND CHASSIS UNDER INDOOR CONDITIONS
PD IEC/TR 60721-4-3:2002 Classification of environmental conditions. Guidance for the correlation and transformation of environmental condition classes of IEC 60721-3 to the environmental tests of IEC 60068 Stationary use at weatherprotected locations
BS EN 61481-1:2014 Live working. Phase comparators Capacitive type to be used for voltages exceeding 1 kV a.c.
BS EN 153000:1998 Harmonized system of quality assessment for electronic components. Generic specification: discrete pressure contact power semiconductor devices (qualification approval)
BS EN 60938-1:2000 Fixed inductors for electromagnetic interference suppression Generic specification
12/30274796 DC : 0 BS IEC 61189-5-2 ED.1 - TEST METHODS FOR ELECTRICAL MATERIALS, INTERCONNECTION STRUCTURES AND ASSEMBLIES - PART 5-2: TEST METHODS FOR PRINTED BOARD ASSEMBLIES: SOLDERING FLUX
12/30258507 DC : 0 BS EN 62575-1 - RADIO FREQUENCY (RF) BUK ACOUSTIC WAVE (BAW) FILTERS OF ASSESSED QUALITY - PART 1: GENERIC SPECIFICATION
BS EN 170000:1999 Harmonized system of quality assessment for electronic components. Generic specification: waveguide type dielectric resonators
12/30274804 DC : 0 BS IEC 61189-5-4 ED.1 - TEST METHODS FOR ELECTRICAL MATERIALS, INTERCONNECTION STRUCTURES AND ASSEMBLIES - PART 5-4: TEST METHODS FOR PRINTED BOARD ASSEMBLIES: SOLDER ALLOYS AND FLUXED AND NON-FLUXED SOLID WIRE
BS ISO 16525-7:2014 Adhesives. Test methods for isotropic electrically conductive adhesives Environmental test methods
05/30138794 DC : DRAFT SEP 2005
IEC 62884-3:2018 Measurement techniques of piezoelectric, dielectric and electrostatic oscillators - Part 3: Frequency aging test methods
BS EN 50131-2-6:2008 Alarm systems. Intrusion and hold-up systems Opening contacts (magnetic)
15/30290851 DC : 0 BS EN 54-25 - FIRE DETECTION AND FIRE ALARM SYSTEMS - PART 25: COMPONENTS USING RADIO LINKS
BS EN 54-31 : 2014 FIRE DETECTION AND FIRE ALARM SYSTEMS - PART 31: MULTI-SENSOR FIRE DETECTORS - POINT DETECTORS USING A COMBINATION OF SMOKE, CARBON MONOXIDE AND OPTIONALLY HEAT SENSORS
12/30270756 DC : 0 BS EN 61076-3-104 - CONNECTORS FOR ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 3-104: DETAIL SPECIFICATION FOR 8-WAY, SHIELDED FREE AND FIXED CONNECTORS FOR DATA TRANSMISSIONS WITH FREQUENCIES UP TO 2000 MHZ
NF EN 61076 4 100 : 2002 CONNECTORS FOR ELECTRONIC EQUIPMENT - PART 4-100: PRINTED BOARD CONNECTORS WITH ASSESSED QUALITY - DETAIL SPECIFICATION FOR TWO-PART CONNECTOR MODULES HAVING A GRID OF 2,5 MM FOR PRINTED BOARDS AND BACKPLANES
UNI EN ISO 24534-2 : 2011 AUTOMATIC VEHICLE AND EQUIPMENT IDENTIFICATION - ELECTRONIC REGISTRATION IDENTIFICATION (ERI) FOR VEHICLES - PART 2: OPERATIONAL REQUIREMENTS
BS EN 60746-1:2003 Expression of performance of electrochemical analyzers General
BS ISO/IEC 11801-1:2017 Information technology. Generic cabling for customer premises General requirements
12/30258875 DC : 0 BS EN 61000-4-19 ED 1 - ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-19 - TESTING AND MEASUREMENT TECHNIQUES - TEST FOR IMMUNITY TO CONDUCTED, DIFFERENTIAL MODE DISTURBANCES IN THE FREQUENCY RANGE FROM 2 KHZ TO 150 KHZ, AT A.C. PORTS
13/30280627 DC : 0 BS ISO 7240-15 - FIRE DETECTION AND ALARM SYSTEMS - PART 15: POINT-TYPE FIRE DETECTORS USING SMOKE AND HEAT SENSORS
IEC PAS 61076-3-116:2005 Connectors for electronic equipment - Part 3-116: Rectangular connectors - Protective housings for use with 8-way shielded and unshielded connectors for frequencies up to 600 MHz for industrial environments incorporating the IEC 60603-7 series interface - Variant 13 related to IEC 61076-3-106 - Bayonet coupling with spring clamp
BS EN 62974-1:2017 Monitoring and measuring systems used for data collection, gathering and analysis Device requirements
BS CECC23400-800(1991) : 1991 AMD 7368 HARMONIZED SYSTEM OF QUALITY ASSESSMENT FOR ELECTRONIC COMPONENTS: CAPABILITY DETAIL SPECIFICATION: FLEXIBLE PRINTED BOARDS WITHOUT THROUGH-CONNECTIONS
CEI EN 62341-5 : 2011 ORGANIC LIGHT EMITTING DIODE (OLED) DISPLAYS - PART 5: ENVIRONMENTAL TESTING METHODS
BS EN 61811-54:2002 Electromechanical non-specified time all-or-nothing relays of assessed quality Blank detail specification. Electromechanical all-or-nothing telecom relays of assessed quality. Two change-over contacts, 15 mm x 7,5 mm base
NF EN 61180 : 2016 HIGH-VOLTAGE TEST TECHNIQUES FOR LOW-VOLTAGE EQUIPMENT - DEFINITIONS, TEST AND PROCEDURE REQUIREMENTS, TEST EQUIPMENT
BS CECC 265001:1998 Harmonized system of quality assessment for electronic components. Technology approval schedule. Film and hybrid integrated circuits
07/30170080 DC : DRAFT AUG 2007 PREN 50131-2-6 - ALARM SYSTEMS - INTRUSION AND HOLD-UP SYSTEMS - PART 2-6: OPENING CONTACTS (MAGNETIC)
11/30253626 DC : 0 BS EN 61196-2 ED.3 - COAXIAL COMMUNICATION CABLES - PART 2: SECTIONAL SPECIFICATION FOR SEMI-RIGID CABLES WITH POLYTERAFLUOROETHYLENE (PTFE) DIELECTRIC
CEI EN 61988-3-2 : 2010 PLASMA DISPLAY PANELS - PART 3-2: INTERFACE - ELECTRICAL INTERFACE
06/30153524 DC : DRAFT JULY 2006 EN 62137-1-3 - SURFACE-MOUNT TECHNOLOGY - ENVIRONMENTAL AND ENDURANCE TEST METHODS FOR SURFACE MOUNT SOLDER JOINT - PART 1-3: CYCLIC DROP TEST
16/30338291 DC : 0 BS EN 60793-1-60 - OPTICAL FIBRES - PART 1-60: MEASUREMENT METHODS AND TEST PROCEDURES - BEAT LENGTH
10/30211766 DC : 0 BS EN 61881-3 - RAILWAY APPLICATIONS - ROLLING STOCK EQUIPMENT CAPACITORS FOR POWER ELECTRONICS - PART 3: ELECTRIC DOUBLE-LAYER CAPACITOR
BIS IS 15382-1 : 2014 INSULATION COORDINATION FOR EQUIPMENT WITHIN LOW-VOLTAGE SYSTEMS - PART 1: PRINCIPLES, REQUIREMENTS AND TESTS
10/30210160 DC : 0 BS ISO 12239 - SMOKE ALARMS
CEI EN 60068-2-57 : 2014 ENVIRONMENTAL TESTING - PART 2-57: TESTS - TEST FF: VIBRATION - TIME HISTORY AND SINE-BEAT METHOD
I.S. EN 60384-11:2008 FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 11: SECTIONAL SPECIFICATION - FIXED POLYETHYLENE-TEREPHTHALATE FILM DIELECTRIC METAL FOIL D.C. CAPACITORS
BS EN 60603-1:2000 Connectors for frequencies below 3 MHz for use with printed boards Generic specification. General requirements and guide for the preparation of detail specifications with assessed quality
BS EN 62575-1:2016 Radio frequency (RF) bulk acoustic wave (BAW) filters of assessed quality Generic specification
02/206656 DC : DRAFT JUN 2002 IEC 61189-6. ED. 1 - TEST METHODS FOR ELECTRICAL MATERIALS, INTERCONNECTION STRUCTURES AND ASSEMBLIES - PART 6: TEST METHODS FOR MATERIALS USED IN ELECTRONIC ASSEMBLIES
I.S. EN 61753-111-7:2010 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS PERFORMANCE STANDARD - PART 111-7: SEALED CLOSURES FOR CATEGORY A - AERIAL
BS CECC 40200:1981 Harmonized system of quality assessment for electronic components: sectional specification: fixed power resistors
UNE-EN 60068-2-38:2010 Environmental testing -- Part 2-38: Tests - Test Z/AD: Composite temperature/humidity cyclic test
BS CECC 16000-1:1992 Harmonized system of quality assessment for electronic components. Generic specification: electromechanical all-or-nothing relays General
13/30279642 DC : 0 BS EN 61811-1 - ELECTROMECHANICAL ALL-OR-NOTHING TELECOM RELAYS OF ASSESSED QUALITY - PART 1: GENERIC SPECIFICATION AND BLANK DETAIL SPECIFICATION
EN 60068-2-38:2009 Environmental testing - Part 2-38: Tests - Test Z/AD: Composite temperature/humidity cyclic test
I.S. EN ISO 8230-1:2008 SAFETY REQUIREMENTS FOR DRY-CLEANING MACHINES - PART 1: COMMON SAFETY REQUIREMENTS
13/30280840 DC : 0 BS EN 60758 - SYNTHETIC QUART CRYSTAL - SPECIFICATIONS AND GUIDELINES FOR THE USE
BS EN 61076-3-115:2010 Connectors for electronic equipment. Product requirements Rectangular connectors. Detail specification for protective housings for use with 8-way shielded and unshielded connectors for frequencies up to 600 MHz for industrial environments incorporating the IEC 60603-7 series interface. Variant 12 related to IEC 61076-3-106. Push-pull type
09/30213156 DC : 0 BS EN 62496-2-2 ED 1 - OPTICAL CIRCUIT BOARDS - TEST AND MEASUREMENT PROCEDURES - PART 2-2: MEASUREMENTS: DIMENSIONS OF OPTICAL CIRCUIT BOARDS
BS CECC 25100(1977) : 1977 AMD 7577 HARMONIZED SYSTEM OF QUALITY ASSESSMENT FOR ELECTRONIC COMPONENTS: SECTIONAL SPECIFICATION: MAGNETIC OXIDE CORES FOR INDUCTOR APPLICATIONS
03/108947 DC : DRAFT MAY 2003 IEC 60758 ED.3 - SYNTHETIC QUARTZ CRYSTAL - SPECIFICATIONS AND GUIDE TO THE USE
NF EN 50508 : 2009 MULTI-PURPOSE INSULATING STICKS FOR ELECTRICAL OPERATIONS ON HIGH VOLTAGE INSTALLATIONS
BS EN 62319-1:2005 Polymeric thermistors. Directly heated positive step function temperature coefficient Generic specification
NF EN 60068 2-64 : 2008 ENVIRONMENTAL TESTING - PART 2-64: TESTS - TEST FH: VIBRATION, BROADBAND RANDOM AND GUIDANCE
I.S. EN 61965:2003 MECHANICAL SAFETY OF CATHODE RAY TUBES
EN 54-5:2017 Fire detection and fire alarm systems - Part 5: Heat detectors - Point heat detectors
NF EN 61481 : 2001 AMD 2 2005 LIVE WORKING - PORTABLE PHASE COMPARATORS FOR USE ON VOLTAGES FROM 1 KV TO 36 KV A.C.
15/30325282 DC : 0 BS EN 62884-1 - MEASUREMENT TECHNIQUES OF PIEZOELECTRIC, DIELETIRIC AND ELECTROSTATIC OSCILLATORS - PART 1: BASIC METHODS FOR THE MEASUREMENT
14/30311384 DC : 0 BS EN 60115-2:2014+A1 - FIXED RESISTORS FOR USE IN ELECTRONIC EQUIPMENT - PART 2: SECTIONAL SPECIFICATION: LEADED FIXED LOW POWER FILM RESISTORS
BS EN 61757-1:2012 Fibre optic sensors Generic specification
BS IEC 61189-5-2 : 2015 TEST METHODS FOR ELECTRICAL MATERIALS, PRINTED BOARDS AND OTHER INTERCONNECTION STRUCTURES AND ASSEMBLIES - PART 5-2: GENERAL TEST METHODS FOR MATERIALS AND ASSEMBLIES - SOLDERING FLUX FOR PRINTED BOARD ASSEMBLIES
PD CEN ISO/TS 14907-1:2015 Electronic fee collection. Test procedures for user and fixed equipment Description of test procedures
IEC 62851-3:2014 Alarm and electronic security systems - Social alarm systems - Part 3: Local unit and controller
BS EN 62040-5-3:2017 Uninterruptible power systems (UPS) DC output UPS. Performance and test requirements
05/30133599 DC : DRAFT MAY 2005 IEC 62137-1-2 - SURFACE MOUNT TECHNOLOGY - ENVIRONMENTAL ENDURANCE TEST METHODS FOR SURFACE MOUNT SOLDER JOINT - PART 1-2: SHEAR STRENGTH TEST
11/30236274 DC : 0 BS ISO 7240-23 - FIRE DETECTION AND ALARM SYSTEMS - PART 23: VISUAL ALARM DEVICES
04/30124126 DC : DRAFT OCT 2004 IEC 61076-2-104 ED.1 - CONNECTORS FOR ELECTRONIC EQUIPMENT - PART 2-104: CIRCULAR CONNECTORS - DETAIL SPECIFICATION FOR M8 CONNECTORS WITH SCREW OR SNAP-LOCKING FOR LOW VOLTAGE APPLICATIONS
BS EN 60862-1:2015 Surface acoustic wave (SAW) filters of assessed quality Generic specification
BS 6201-3:1982 Fixed capacitors for use in electronic equipment Specification for fixed capacitors for radio interference suppression. Selection of methods of test and general requirements
BS EN 171000:2001 Harmonized system of quality assessment for electronic components. Generic specification. Filters using waveguide type dielectric resonators
BS EN 61481-2:2014 Live working. Phase comparators Resistive type to be used for voltages from 1 kV to 36 kV a.c.
BS EN 61338-2:2004 Waveguide type dielectric resonators Guidelines for oscillator and filter applications
BS 2011-2.1Z/AM:1977 Environmental testing. Tests Test Z/AM. Combined cold/low air pressure tests
BS IEC 62679-1-1:2014 Electronic paper displays Terminology
BS EN 61076-3-100:2000 Connectors for use in d.c., low-frequency analogue and digital high-speed data applications Rectangular connectors with assessed quality - Detail specification for a range of shielded connectors with trapezoidal-shaped shells and non-removable ribbon contacts on a 1,27 mm double row
10/30181171 DC : 0 BS EN 62586 - POWER QUALITY MONITORING DEVICES IN POWER SUPPLY SYSTEMS
03/106843 DC : DRAFT MAY 2003 ISO 7240-6 - FIRE DETECTION AND ALARM SYSTEMS - PART 6: POINT-TYPE FIRE DETECTORS FOR DETECTION OF CARBON MONOXIDE
CEI EN 62093 : 2005 BALANCE-OF-SYSTEM COMPONENTS FOR PHOTOVOLTAIC SYSTEMS - DESIGN QUALIFICATION NATURAL ENVIRONMENTS
07/30160635 DC : 0 BS EN 60352-8 - SOLDERLESS CONNECTIONS - PART 8: COMPRESSION MOUNT CONNECTIONS - GENERAL REQUIREMENTS, TEST METHODS AND PRACTICAL GUIDANCE
10/30240248 DC : 0 BS EN 60862-1 - SURFACE ACOUSTIC WAVE (SAW) FILTERS OF ASSESSED QUALITY - PART 1: GENERIC SPECIFICATION
13/30282681 DC : 0 BS EN 61169-48 ED.1 - RADIO-FREQUENCY CONNECTORS - PART 48: SECTIONAL SPECIFICATION FOR BMP SERIES BLIND MATING R.F. COAXIAL CONNECTORS
97/208495 DC : DRAFT JUL 1997 IEC 61640 - HV GAS-INSULATED TRANSMISSION LINES FOR RATED VOLTAGES OF 72,5 KV AND ABOVE
CSA E60384.14 : 2014 FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 14: SECTIONAL SPECIFICATION - FIXED CAPACITORS FOR ELECTROMAGNETIC INTERFERENCE SUPPRESSION AND CONNECTION TO THE SUPPLY MAINS
PREN 54-11 : DRAFT 2013 FIRE DETECTION AND FIRE ALARM SYSTEMS - PART 11: MANUAL CALL POINTS
BS IEC 61000-6-6:2003 Electromagnetic compatibility (EMC) Generic standards - HEMP immunity for indoor equipment
BS IEC 62908-13-10:2016 Touch and interactive displays Reliability test methods of touch displays. Environmental durability test methods
BS EN 60939-1:2010 Passive filter units for electromagnetic interference suppression Generic specification
04/30122860 DC : DRAFT SEP 2004 ISO 7240-22 - FIRE DETECTION AND FIRE ALARM EQUIPMENT - PART 22: DUCT SAMPLING EQUIPMENT
I.S. EN 15859:2010 AIR QUALITY - CERTIFICATION OF AUTOMATED DUST ARRESTMENT PLANT MONITORS FOR USE ON STATIONARY SOURCES - PERFORMANCE CRITERIA AND TEST PROCEDURES
I.S. EN 61988-2-4:2011 PLASMA DISPLAY PANELS - PART 2-4: MEASURING METHODS - VISUAL QUALITY: IMAGE ARTIFACTS (IEC 61988-2-4:2011 (EQV))
PREN 54-20 : DRAFT 2014 FIRE DETECTION AND FIRE ALARM SYSTEMS - PART 20: ASPIRATING SMOKE DETECTORS
CEI EN 61646 : 2012 THIN-FILM TERRESTRIAL PHOTOVOLTAIC (PV) MODULES - DESIGN QUALIFICATION AND TYPE APPROVAL
CEI EN 61747-10-1 : 2014 LIQUID CRYSTAL DISPLAY DEVICES - PART 10-1: ENVIRONMENTAL, ENDURANCE AND MECHANICAL TEST METHODS - MECHANICAL
PD IEC TR 60721-4-6:2002 Ship environmentClassification of environmental conditions. Guidance for the correlation and transformation of environmental condition classes of IEC 60721-3 to the environmental tests of IEC 60068
BS EN 60749:1999 Semiconductor devices. Mechanical and climatic test methods
98/230491 DC : DRAFT MARCH 1998 IEC 60728-5 - CABLED DISTRIBUTION SYSTEMS FOR TELEVISION AND SOUND SIGNALS - PART 5: HEAD END EQUIPMENT
PREN 14604 : DRAFT 2016 SMOKE ALARM DEVICES
BS EN 60793-1-61:2017 Optical fibres Measurement methods and test procedures. Polarization crosstalk
14/30299574 DC : 0 BS EN 61300-2-9 - FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - BASIC TEST AND MEASUREMENT PROCEDURES - PART 2-9: TESTS - SHOCK
BS QC 160100:1987 Harmonized system of quality assessment for electronic components. Electrical relays. Sectional specification: electromechanical all-or-nothing relays
BS EN 60539-1:2016 Directly heated negative temperature coefficient thermistors Generic specification
16/30335488 DC : 0 BS EN 60068-2-84 - ENVIRONMENTAL TESTING - PART 2-84: RAPID CHANGE OF DEW CONDENSATION
94/712993 DC : DRAFT NOV 1994 PREN 45511 - GUIDE FOR PROCUREMENT - ELECTRICAL EQUIPMENT - SWITCHGEAR AND CONTROLGEAR
14/30315320 DC : 0 BS EN 60384-15 - FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 15: SECTIONAL SPECIFICATION: FIXED TANTALUM CAPACITORS WITH NON-SOLID OR SOLID ELECTROLYTE
BS EN 61076-4-101:2001 Connectors for electronic equipment Printed board connectors with assessed quality. Detail specification for two-part connector modules, having a basic grid of 2,0 mm for printed boards and backplanes in accordance with IEC 60917
BS CECC 12000(1981) : 1981 AMD 9605 HARMONIZED SYSTEM OF QUALITY ASSESSMENT FOR ELECTRONIC COMPONENTS - GENERIC SPECIFICATION - IMAGE CONVERTER & IMAGE INTENSIFIER TUBES
17/30347208 DC : 0 BS ISO 7240-7 - FIRE DETECTION AND ALARM SYSTEMS - PART 7: POINT-TYPE SMOKE DETECTORS USING SCATTERED LIGHT, TRANSMITTED LIGHT OR IONIZATION
BS EN 187000:1994 Generic specification for optical fibre cables
EN 61243-1:2005/A1:2010 LIVE WORKING - VOLTAGE DETECTORS - PART 1: CAPACITIVE TYPE TO BE USED FOR VOLTAGES EXCEEDING 1 KV A.C.
07/30169763 DC : 0 BS EN 62515 - EVALUATION CRITERIA FOR VOIDS IN SOLDERED JOINTS OF BGA AND LGA
BS EN 62262:2002 Degrees of protection provided by enclosures for electrical equipment against external mechanical impacts (IK code)
BS EN 60384-4:2016 Fixed capacitors for use in electronic equipment Sectional specification. Fixed aluminium electrolytic capacitors with solid (MnO<sub>2</sub>) and non-solid electrolyte
DIN EN 138000 : 1997 GENERIC SPECIFICATION; FIXED INDUCTORS FOR ELECTROMAGNETIC INTERFERENCE SUPPRESSION (INDUCTORS FOR WHICH SAFETY TESTS ARE REQUIRED)
IEC 62642-3:2010 Alarm systems - Intrusion and hold-up systems - Part 3: Control and indicating equipment
12/30267336 DC : 0 BS EN 62629-12-1 ED 1.0 - 3D DISPLAY DEVICES - PART 12-1: MEASURING METHODS FOR STEREOSCOPIC DISPLAYS USING GLASSES - OPTICAL
04/30109635 DC : 0 BS EN 54-23 - FIRE DETECTION AND FIRE ALARM SYSTEMS - PART 23: FIRE ALARM DEVICES - VISUAL ALARMS
IEC 60747-5-4:2006 Semiconductor devices - Discrete devices - Part 5-4: Optoelectronic devices - Semiconductor lasers
02/206147 DC : DRAFT AUG 2002 IEC 60603-7-4 ED.1.0 - CONNECTORS FOR ELECTRONIC EQUIPMENT - PART 7-4: DETAIL SPECIFICATION FOR 8-WAY, UNSHIELDED, FREE AND FIXED CONNECTORS, FOR DATA TRANSMISSIONS WITH FREQUENCIES UP TO 250 MHZ (CAT 6, UNSHIELDED)
IEC 61020-4:1991 Electromechanical switches for use in electronic equipement - Part 4: Sectional specification for lever (toggle) switches
07/30166815 DC : 0 BS EN 60068-2-65 AMD1 - ENVIRONMENTAL TESTING - PART 2-65: METHODS OF TEST - TEST FG - VIBRATION, ACOUSTICALLY INDUCED
CEI EN 61076-3-116 : 2010 CONNECTORS FOR ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 3-116: RECTANGULAR CONNECTORS - PROTECTIVE HOUSINGS FOR USE WITH 8- WAY SHIELDED AND UNSHIELDED CONNECTORS FOR FREQUENCIES UP TO 600 MHZ FOR INDUSTRIAL ENVIRONMENTS INCORPORATING THE IEC 60603-7 SERIES INTERFACE - VARIANT 13 RELATED TO IEC 61076-3-106 - LOCKING LEVER
BS IEC 62790 : 2014 JUNCTION BOXES FOR PHOTOVOLTAIC MODULES - SAFETY REQUIREMENTS AND TESTS
DD CEN ISO/TS 14907-1:2010 Electronic fee collection. Test procedures for user and fixed equipment Description of test procedures
BS EN 60068-2-47:2005 Environmental testing Tests. Mounting of specimens for vibration, impact and similar dynamic tests
I.S. EN 60068-3-8:2003 ENVIRONMENTAL TESTING - PART 3-8: SUPPORTING DOCUMENTATION AND GUIDANCE - SELECTING AMONGST VIBRATION TESTS
CEI EN 60384-11 : 2008 FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 11: SECTIONAL SPECIFICATION - FIXED POLYETHYLENE-TEREPHTHALATE FILM DIELECTRIC METAL FOIL D.C. CAPACITORS
05/30135750 DC : DRAFT JUL 2005 ISO 7240-10 - FIRE DETECTION AND ALARM SYSTEMS - PART 10: POINT-TYPE FLAME DETECTORS
PREN 54-10 : DRAFT 2012 FIRE DETECTION AND FIRE ALARM SYSTEMS - PART 10: FLAME DETECTORS - POINT DETECTORS
CEI EN 62271-204 : 2012 HIGH-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 204: RIGID GAS-INSULATED TRANSMISSION LINES FOR RATED VOLTAGES ABOVE 52 KV
10/30210450 DC : 0 BS EN 61076-4-116 - CONNECTORS FOR ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 4-116: PRINTED BOARD CONNECTORS: DETAIL SPECIFICATION FOR A HIGH-SPEED TWO-PART CONNECTOR WITH INTEGRATED SHIELDING FUNCTION
07/30165274 DC : 0 BS EN 61076-2-106 - CONNECTORS FOR ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 2-106: CIRCULAR CONNECTORS - DETAIL SPECIFICATION FOR CIRCULAR CONNECTORS M16 * 0.75 WITH SCREW-LOCKING DEGREE OF PROTECTION IP40
NFC 18 422 : 2007 BLANKETS OF INSULATING MATERIAL FOR ELECTRICAL PURPOSES
10/30218875 DC : 0 BS EN 50130-5:2010 - ALARM SYSTEMS - PART 5: ENVIRONMENTAL TEST METHODS
15/30331587 DC : 0 BS EN 61189-5-503 - TEST METHODS FOR ELECTRICAL MATERIALS, PRINTED BOARDS AND OTHER INTERCONNECTION STRUCTURES AND ASSEMBLIES - PART 5-503: GENERAL TEST METHODS FOR MATERIALS AND ASSEMBLIES - CONDUCTIVE ANODIC FILAMENTS (CAF) TESTING OF CIRCUIT BOARDS
BS EN 50102 : 95 AMD 14044 DEGREES OF PROTECTION PROVIDED BY ENCLOSURES FOR ELECTRICAL EQUIPMENT AGAINST EXTERNAL MECHANICAL IMPACTS (IK CODE)
BS EN 50131-2-7-2 : 2012 ALARM SYSTEMS - INTRUSION AND HOLD-UP SYSTEMS - PART 2-7-2: INTRUSION DETECTORS - GLASS BREAK DETECTORS (PASSIVE)
NF EN 60384-1 : 2016 FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 1: GENERIC SPECIFICATION
09/30184483 DC : 0 BS EN 54-3 - FIRE DETECTION AND FIRE ALARM SYSTEMS - PART 3: FIRE ALARM DEVICES - SOUNDERS
03/104227 DC : DRAFT MAY 2003 IEC 60393-6 ED.1 - POTENTIOMETERS FOR USE IN ELECTRONIC EQUIPMENT - PART 6: SECTIONAL SPECIFICATION - SURFACE MOUNT PRESET POTENTIOMETERS
BS ISO 7240-8:2014 Fire detection and alarm systems Point-type fire detectors using a carbon monoxide sensor in combination with a heat sensor
BS 6083-0(1984) : 1984 AMD 7836 HEARING AIDS - METHODS FOR MEASUREMENT OF ELECTROACOUSTICAL CHARACTERISTICS
CEI EN 62496-2-2 : 2012 OPTICAL CIRCUIT BOARDS - PART 2-2: MEASUREMENTS - DIMENSIONS OF OPTICAL CIRCUIT BOARDS
17/30355848 DC : 0 BS EN 60384-22 ED.3.0 - FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 22: SECTIONAL SPECIFICATION - FIXED SURFACE MOUNT MULTILAYER CAPACITORS OF CERAMIC DIELECTRIC, CLASS 2
IEC 61000-4-16:2015 RLV Electromagnetic compatibility (EMC) - Part 4-16: Testing and measurement techniques - Test for immunity to conducted, common mode disturbances in the frequency range 0 Hz to 150 kHz
BS EN 60384-1:2016 Fixed capacitors for use in electronic equipment Generic specification
02/540596 DC : DRAFT JULY 2002 PREN 54-17 - FIRE DETECTION AND FIRE ALARM SYSTEMS - PART 17: SHORT CIRCUIT ISOLATORS
BS 2011-2.1Z/BFc:1984 Environmental testing. Tests Tests Z/BFc. Combined dry heat/vibration (sinusoidal) tests for both heat-dissipating and non-heat-dissipating specimens
CSA CEI/IEC 61000.4.2 : 2001 ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-2: TESTING AND MEASUREMENT TECHNIQUES - ELECTROSTATIC DISCHARGE IMMUNITY TEST
BS EN 60068-2-57:2013 Environmental testing Tests. Test Ff: Vibration. Time-history and sine-beat method
08/30195395 DC : 0 BS EN ISO 24534-2 - AUTOMATIC VEHICLE AND EQUIPMENT IDENTIFICATION - ELECTRONIC REGISTRATION IDENTIFICATION (ERI) FOR VEHICLES - PART 2: OPERATIONAL REQUIREMENTS
BIS IS 5054-8 : 2013 RADIO FREQUENCY CONNECTORS - PART 8: SECTIONAL SPECIFICATION - RF COAXIAL CONNECTORS WITH INNER DIAMETER OF OUTER CONDUCTOR 6.5 MM (0.256 IN) WITH BAYONET LOCK - CHARACTERISTIC IMPEDANCE 50 (TYPE BNC)
I.S. EN 61076-7-100:2006 CONNECTORS FOR ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 7-100: CABLE OUTLET ACCESSORIES - DETAIL SPECIFICATION FOR A METRIC CABLE SEALING CONSISTING OF AN INTEGRATED PART OF HEAVY-DUTY RECTANGULAR OR CIRCULAR CONNECTOR HOODS AND A SEALING SYSTEM
UNE-EN 16280:2013 Breath alcohol test devices for general public - Requirements and test methods
CEI EN 61753-101-3 : 2010 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS PERFORMANCE STANDARD - PART 101-3: FIBRE MANAGEMENT SYSTEMS FOR CATEGORY U - UNCONTROLLED ENVIRONMENT
BS EN 61051-1:2008 Varistors for use in electronic equipment Generic specification
02/211632 DC : DRAFT DEC 2002 IEC 69747-5-4 ED.1 - SEMICONDUCTOR DEVICES - DISCRETE DEVICES - PART 5-4: OPTOELECTRONIC DEVICES - SEMICONDUCTOR LASERS
BS EN 60130-9:2011 Connectors for frequencies below 3 MHz Circular connectors for radio and associated sound equipment
FD ISO/TR 12369 : 2001 FD AGRICULTURAL TRACTORS AND MACHINERY - ELECTRICAL POWER TRANSMISSION CONNECTORS
I.S. EN 60384-18:2016 FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 18: SECTIONAL SPECIFICATION - FIXED ALUMINIUM ELECTROLYTIC SURFACE MOUNT CAPACITORS WITH SOLID (MNO[2]) AND NON-SOLID ELECTROLYTE
I.S. EN 60384-17:2005 FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 17: SECTIONAL SPECIFICATION: FIXED METALLIZED POLYPROPYLENE FILM DIELECTRIC A.C. AND PULSE CAPACITORS
BS EN IEC 61189-5-503:2017 Test methods for electrical materials, printed board and other interconnection structures and assemblies General test method for materials and assemblies. Conductive anodic filaments (CAF) testing of circuit boards
BS EN 61169-8:2007 Radio-frequency connectors Sectional specification. RF coaxial connectors with inner diameter of outer conductor 6,5 mm (0,256 in) with bayonet lock. Characteristic impedance 50 ohms (type BNC)
05/30136204 DC : DRAFT JUL 2005
98/201910 DC : DRAFT APRIL 1998 PREN 50297 - PHOTOELECTRIC CONTROL UNITS FOR ROAD AND STREET LIGHTING
BS EN 50131-2-5:2008 Alarm systems. Intrusion and hold-up systems Requirements for combined passive infrared and ultrasonic detectors
05/30135445 DC : DRAFT JUN 2005 IEC 61169-8 - RADIO-FREQUENCY CONNECTORS - PART 8: SECTIONAL SPECIFICATION - RF COAXIAL CONNECTORS WITH INNER DIAMETER OF OUTER CONDUCTOR 6,5 MM (0,256 IN) WITH BAYONET LOCK - CHARACTERISTICS IMPEDANCE 50 OHMS (TYPE BNC)
OIML R 81 : 1998 DYNAMIC MEASURING DEVICES AND SYSTEMS FOR CRYOGENIC LIQUIDS
ISO 16525-7:2014 Adhesives Test methods for isotropic electrically conductive adhesives Part 7: Environmental test methods
CEI ENV 50204 : 1996 RADIATED ELECTROMAGNETIC FIELD FROM DIGITAL RADIO TELEPHONES - PART 1: IMMUNITY TEST
BS EN 61881-3 : 2012 RAILWAY APPLICATIONS - ROLLING STOCK EQUIPMENT - CAPACITORS FOR POWER ELECTRONICS - PART 3: ELECTRIC DOUBLE-LAYER CAPACITORS
CEI EN 61076-7-100 : 2007 CONNECTORS FOR ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS PART 7-100: CABLE OUTLET ACCESSORIES - DETAIL SPECIFICATION FOR A METRIC CABLE SEALING CONSISTING OF AN INTEGRATED PART OF HEAVY-DUTY RECTANGULAR OR CIRCULAR CONNECTOR HOODS AND A SEALING SYSTEM
03/100395 DC : DRAFT APR 2003 EN 175101-809 - DETAIL SPECIFICATION - TWO-PART CONNECTORS FOR PRINTED BOARDS HAVING A GRID OF 2,54 MM, SHORT VERSION IN COMPLIANCE WITH CECC 75 101-801, WITH ASSESSED QUALITY
05/30135449 DC : DRAFT JUN 2005 IEC 61169-16 - RADIO-FREQUENCY CONNECTORS - PART 16: SECTIONAL SPECIFICATION - RF COAXIAL CONNECTORS WITH INNER DIAMETER OF OUTER CONDUCTOR 7 MM (0,276 IN) WITH SCREW COUPLING - CHARACTERISTICS IMPEDANCE 50 OHMS (75 OHMS) (TYPE N)
OIML R 85-1 & 2 : 2008 AUTOMATIC LEVEL GAUGES FOR MEASURING THE LEVEL OF LIQUID IN STATIONARY STORAGE TANKS - PART 1: METROLOGICAL AND TECHNICAL REQUIREMENTS; PART 2: METROLOGICAL CONTROL AND TESTS
CSA CEI/IEC 61000.4.8 : 2002 : R2006 ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-8: TESTING AND MEASUREMENT TECHNIQUES - POWER FREQUENCY MAGNETIC FIELD IMMUNITY TEST
NF EN 61076-2-109 : 2014 CONNECTORS FOR ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 2-109: CIRCULAR CONNECTORS - DETAIL SPECIFICATION FOR CONNECTORS WITH M 12 X 1 SCREW-LOCKING, FOR DATA TRANSMISSION FREQUENCIES UP TO 500 MHZ
I.S. EN 60143-4:2010 SERIES CAPACITORS FOR POWER SYSTEMS - PART 4: THYRISTOR CONTROLLED SERIES CAPACITORS
CEI EN 60068-5-2 : 2000 ENVIRONMENTAL TESTING - PART 5: GUIDE TO DRAFTING OF TEST METHODS TERMS AND DEFINITIONS
02/202649 DC : DRAFT JAN 2002 IEC PAS 61076-3-111. ED.1 - CONNECTORS FOR USE IN ELECTRONIC EQUIPMENT - PART 3-111: DETAIL SPECIFICATION FOR 8-WAY, SHIELDED AND UNSHIELDED, FREE AND FIXED CONNECTORS, FOR INDUSTRIAL ENVIRONMENTS FOR FREQUENCIES UP TO 250 MHZ
CEI EN 60068-2-21 : 2006 ENVIRONMENTAL TESTING - PART 2-21: TESTS - TEST U: ROBUSTNESS OF TERMINATIONS AND INTEGRAL MOUNTING DEVICES
I.S. EN 54-12:2015 FIRE DETECTION AND FIRE ALARM SYSTEMS - PART 12: SMOKE DETECTORS - LINE DETECTORS USING AN OPTICAL BEAM
BS EN 61114-2:1997 Methods of measurement on receiving antennas for satellite broadcast transmissions in the 12 GHz band Mechanical and environmental tests on individual and collective receiving antennas
NF EN 62674-1 : 2013 HIGH FREQUENCY INDUCTIVE COMPONENTS - PART 1: FIXED SURFACE MOUNT INDUCTORS FOR USE IN ELECTRONIC AND TELECOMMUNICATION EQUIPMENT
BS EN 60127-6:2014 Miniature fuses Fuse-holders for miniature fuse-links
09/30197779 DC : 0 BS ISO 7240-25 - FIRE DETECTION AND FIRE ALARM SYSTEMS - PART 25: COMPONENTS USING RADIO TRANSMISSION PATHS
BS CECC68000(1990) : AMD 9184 HARMONIZED SYSTEM OF QUALITY ASSESSMENT FOR ELECTRONIC COMPONENTS: GENERIC SPECIFICATION: QUARTZ CRYSTAL UNITS
CSA CEI/IEC 61000.4.8 : 2002FR ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-8: TESTING AND MEASUREMENT TECHNIQUES - POWER FREQUENCY MAGNETIC FIELD IMMUNITY TEST
CSA IEC 61000-4-12 : 2013 : R2017 ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-12: TESTING AND MEASUREMENT TECHNIQUES - RING WAVE IMMUNITY TEST
DIN V ENV 50204 : 1996 PRUEFUNG DER STOERFESTIGKEIT GEGEN HOCHFREQUENTE ELEKTROMAGNETISCHE FELDER VON DIGITALEN FUNKTELEFONEN
IEC 60068-2-52:2017 Environmental testing - Part 2-52: Tests - Test Kb: Salt mist, cyclic (sodium chloride solution)
PD CLC/TS 50131-2-10:2014 Alarm systems. Intrusion and hold-up systems Intrusion detectors. Lock state contacts (magnetic)
IEC 60131-1:1984 Lever switches. Part 1: General requirements and rules for the preparation of detail specifications
PREN 50134-3 : DRAFT 2009 ALARM SYSTEMS - SOCIAL ALARM SYSTEMS - PART 3: LOCAL UNIT AND CONTROLLER
CEI EN 61076-2-102 : 2003 CONNECTORS FOR ELECTRONIC EQUIPMENT - PART 2-102: CIRCULAR CONNECTORS WITH ASSESSED QUALITY - DETAIL SPECIFICATION FOR PLUGS AND JACKS FOR EXTERNAL LOW VOLTAGE POWER SUPPLY
CEI EN 61000-4-8 : 2013 ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-8: TESTING AND MEASUREMENT TECHNIQUES - POWER FREQUENCY MAGNETIC FIELD IMMUNITY TEST
UNE-EN 50467:2012 Railway applications - Rolling stock - Electrical connectors, requirements and test methods
NF EN 61076-3-114 : 2010 CONNECTORS FOR ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 3-114: RECTANGULAR CONNECTORS - DETAIL SPECIFICATION FOR PROTECTIVE HOUSINGS FOR USE WITH 8-WAY SHIELDED AND UNSHIELDED CONNECTORS FOR FREQUENCIES UP TO 600 MHZ FOR INDUSTRIAL ENVIRONMENTS INCORPORATING THE IEC 60603-7 SERIES INTERFACE - VARIANT 11 RELATED TO IEC 61076-3-106 - BAYONET COUPLING TYPE
NF EN 60143-4 : 2011 SERIES CAPACITORS FOR POWER SYSTEMS - PART 4: THYRISTOR CONTROLLED SERIES CAPACITORS
CAN/CSA-C22.2 NO. 60947-1-13 (R2018) Low-voltage switchgear and controlgear - Part 1: General rules (Tri-national standard, with UL 60947-1 and NMX-J-515-ANCE)
I.S. EN 61076-3-106:2006 CONNECTORS FOR ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 3-106: RECTANGULAR CONNECTORS - DETAIL SPECIFICATION FOR PROTECTIVE HOUSINGS FOR USE WITH 8-WAY SHIELDED AND UNSHIELDED CONNECTORS FOR INDUSTRIAL ENVIRONMENTS INCORPORATING THE IEC 60603-7 SERIES INTERFACE
I.S. EN 61215-2:2017 TERRESTRIAL PHOTOVOLTAIC (PV) MODULES - DESIGN QUALIFICATION AND TYPE APPROVAL - PART 2: TEST PROCEDURES
S.R. CLC/TS 50131-2-7-3:2009 ALARM SYSTEMS - INTRUSION AND HOLD-UP SYSTEMS - PART 2-7-3: INTRUSION DETECTORS - GLASS BREAK DETECTORS (ACTIVE)
CEI EN 60384-17 : 2006 FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 17: SECTIONAL SPECIFICATION: FIXED METALLIZED POLYPROPYLENE FILM DIELECTRIC A.C. AND PULSE CAPACITORS
CEI EN 61000-4-21 : 2014 ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-21: TESTING AND MEASUREMENT TECHNIQUES - REVERBERATION CHAMBER TEST METHODS
I.S. EN 60689:2009 MEASUREMENT AND TEST METHODS FOR TUNING FORK QUARTZ CRYSTAL UNITS IN THE RANGE FROM 10 KHZ TO 200 KHZ AND STANDARD VALUES
CEI EN 60689 : 2009 MEASUREMENT AND TEST METHODS FOR TUNING FORK QUARTZ CRYSTAL UNITS IN THE RANGE FROM 10 KHZ TO 200 KHZ AND STANDARD VALUES
I.S. EN 61076-2-107:2010 CONNECTORS FOR ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 2-107: DETAIL SPECIFICATION FOR CIRCULAR HYBRID CONNECTORS M12 WITH ELECTRICAL AND FIBRE-OPTIC CONTACTS WITH SCREW LOCKING
I.S. EN 61051-1:2008 VARISTORS FOR USE IN ELECTRONIC EQUIPMENT - PART 1: GENERIC SPECIFICATION
I.S. EN 61757-1:2012 FIBRE OPTIC SENSORS - PART 1: GENERIC SPECIFICATION (IEC 61757-1:2012 (EQV))
I.S. EN 60130-9:2011 CONNECTORS FOR FREQUENCIES BELOW 3 MHZ - PART 9: CIRCULAR CONNECTORS FOR RADIO AND ASSOCIATED SOUND EQUIPMENT
CEI EN 60384-13 : 2013 FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 13: SECTIONAL SPECIFICATION - FIXED POLYPROPYLENE FILM DIELECTRIC METAL FOIL D.C. CAPACITORS
I.S. EN 62137-1-4:2009 SURFACE MOUNTING TECHNOLOGY - ENVIRONMENTAL AND ENDURANCE TEST METHODS FOR SURFACE MOUNT SOLDER JOINT - PART 1-4: CYCLIC BENDING TEST
I.S. EN 61753-052-6:2016 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - PERFORMANCE STANDARD - PART 052-6: SINGLE-MODE FIBRE NON-CONNECTORIZED FIXED ATTENUATOR - CATEGORY O IN OUTSIDE PLANT ENVIRONMENT
I.S. EN 50521:2008 CONNECTORS FOR PHOTOVOLTAIC SYSTEMS - SAFETY REQUIREMENTS AND TESTS
I.S. EN 61076-3-117:2009 CONNECTORS FOR ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 3-117: RECTANGULAR CONNECTORS - DETAIL SPECIFICATION FOR PROTECTIVE HOUSINGS OR USE WITH 8-WAY SHIELDED AND UNSHIELDED CONNECTORS FOR INDUSTRIAL ENVIRONMENTS INCORPORATING THE IEC 60603-7 SERIES INTERFACE - VARIANT 14 RELATED TO IEC 61076-3-106 - PUSH-PULL COUPLING
OVE/ONORM EN 61051-1 : 2009 VARISTORS FOR USE IN ELECTRONIC EQUIPMENT - PART 1: GENERIC SPECIFICATION
CEI EN 50134-2 : 2000 ALARM SYSTEMS - SOCIAL ALARM SYSTEMS - PART 2: TRIGGER DEVICES
CEI EN 60746-1 : 2003 EXPRESSION OF PERFORMANCE OF ELECTROCHEMICAL ANALYZERS - PART 1: GENERAL
CEI EN 61000-4-2 : 2011 ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-2: TESTING AND MEASUREMENT TECHNIQUES - ELECTROSTATIC DISCHARGE IMMUNITY TEST
BS EN 60384-23:2015 Fixed capacitors for use in electronic equipment Sectional specification. Fixed surface mount metallized polyethylene naphthalate film dielectric DC capacitors
I.S. EN 140402:2015 BLANK DETAIL SPECIFICATION: FIXED LOW POWER WIREWOUND SURFACE MOUNT (SMD) RESISTORS
NF EN 62852 : 2015 CONNECTORS FOR DC-APPLICATION IN PHOTOVOLTAIC SYSTEMS - SAFETY REQUIREMENTS AND TESTS
I.S. EN 61076-2-001:2011 CONNECTORS FOR ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 2-001: CIRCULAR CONNECTORS - BLANK DETAIL SPECIFICATION
I.S. EN 60068-2-69:2017 ENVIRONMENTAL TESTING - PART 2-69: TESTS - TEST TE/TC: SOLDERABILITY TESTING OF ELECTRONIC COMPONENTS AND PRINTED BOARDS BY THE WETTING BALANCE (FORCE MEASUREMENT) METHOD
I.S. EN 60384-15:2017 FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 15: SECTIONAL SPECIFICATION: FIXED TANTALUM CAPACITORS WITH NON-SOLID OR SOLID ELECTROLYTE
I.S. EN 50528:2010 INSULATING LADDERS FOR USE ON OR NEAR LOW VOLTAGE ELECTRICAL INSTALLATIONS
BS EN 61076-4-116 : 2012 CONNECTORS FOR ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 4-116: PRINTED BOARD CONNECTORS - DETAIL SPECIFICATION FOR A HIGH-SPEED TWO-PART CONNECTOR WITH INTEGRATED SHIELDING FUNCTION
BS EN 60352-2 : 2006 SOLDERLESS CONNECTIONS - PART 2: CRIMPED CONNECTIONS - GENERAL REQUIREMENTS, TEST METHODS AND PRACTICAL GUIDANCE
I.S. EN IEC 61643-331:2018 COMPONENTS FOR LOW-VOLTAGE SURGE PROTECTION - PART 331: PERFORMANCE REQUIREMENTS AND TEST METHODS FOR METAL OXIDE VARISTORS (MOV)
I.S. EN 61076-3-120:2016 CONNECTORS FOR ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 3-120: RECTANGULAR CONNECTORS - DETAIL SPECIFICATION FOR REWIRABLE POWER CONNECTORS WITH SNAP LOCKING FOR RATED VOLTAGE OF 250 V D.C. AND RATED CURRENT OF 30 A
I.S. EN 60384-20:2015 FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 20: SECTIONAL SPECIFICATION - FIXED METALLIZED POLYPHENYLENE SULFIDE FILM DIELECTRIC SURFACE MOUNT D.C. CAPACITORS
I.S. EN 50467:2011 RAILWAY APPLICATIONS - ROLLING STOCK - ELECTRICAL CONNECTORS, REQUIREMENTS AND TEST METHODS
I.S. EN 140402-801:2015 DETAIL SPECIFICATION: FIXED LOW POWER WIREWOUND SURFACE MOUNT (SMD) RESISTORS - RECTANGULAR - STABILITY CLASSES 0,5; 1; 2
I.S. EN 62326-20:2016 PRINTED BOARDS - PART 20: PRINTED CIRCUIT BOARDS FOR HIGHBRIGHTNESS LEDS
I.S. EN 60068-2-6:2008 ENVIRONMENTAL TESTING - PART 2-6: TESTS - TEST FC: VIBRATION (SINUSOIDAL)
I.S. EN 62333-3:2010 NOISE SUPPRESSION SHEET FOR DIGITAL DEVICES AND EQUIPMENT - PART 3: CHARACTERIZATION OF PARAMETERS OF NOISE SUPPRESSION SHEET
I.S. EN 60352-8:2011 SOLDERLESS CONNECTIONS - PART 8: COMPRESSION MOUNT CONNECTIONS - GENERAL REQUIREMENTS, TEST METHODS AND PRACTICAL GUIDANCE
I.S. EN 62586-1:2017 POWER QUALITY MEASUREMENT IN POWER SUPPLY SYSTEMS - PART 1: POWER QUALITY INSTRUMENTS (PQI)
I.S. EN 61300-2-9:2017 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - BASIC TEST AND MEASUREMENT PROCEDURES - PART 2-9: TESTS - SHOCK
BS EN 50548 : 2011 JUNCTION BOXES FOR PHOTOVOLTAIC MODULES
I.S. EN 61481-1:2014 LIVE WORKING - PHASE COMPARATORS - PART 1: CAPACITIVE TYPE TO BE USED FOR VOLTAGES EXCEEDING 1 KV A.C.
I.S. EN 60352-2:2006 SOLDERLESS CONNECTIONS - PART 2: CRIMPED CONNECTIONS - GENERAL REQUIREMENTS, TEST METHODS AND PRACTICAL GUIDANCE (IEC 60352-2:2006 (EQV))
CEI EN 61076-4-111 : 2003 CONNECTORS FOR ELECTRONIC EQUIPMENT PART 4-111: PRINTED BOARD CONNECTORS WITH ASSESSED QUALITY - DETAIL SPECIFICATION FOR TWO-PART POWER CONNECTOR MODULES, FOR PRINTED BOARDS AND BACKPLANES HAVING EARLY MATING FEATURES, AND HAVING A BASIC GRID OF 2,5 MM IN ACCORDANCE WITH IEC 60917-1
I.S. EN 61076-3-116:2008 CONNECTORS FOR ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 3-116: RECTANGULAR CONNECTORS - DETAIL SPECIFICATION FOR PROTECTIVE HOUSINGS FOR USE WITH 8-WAY SHIELDED AND UNSHIELDED CONNECTORS FOR FREQUENCIES UP TO 600 MHZ FOR INDUSTRIAL ENVIRONMENTS INCORPORATING THE IEC 60603-7 SERIES INTERFACE - VARIANT 13 RELATED TO IEC 61076-3-106 - LOCKING LEVER
OIML D 11 : 2013 GENERAL REQUIREMENTS FOR MEASURING INSTRUMENTS - ENVIRONMENTAL CONDITIONS
CEI EN 50131-2-3 : 2009 ALARM SYSTEMS - INTRUSION AND HOLD-UP SYSTEMS - PART 2-3: REQUIREMENTS FOR MICROWAVE DETECTORS
CEI EN 50508 : 2009 MULTI-PURPOSE INSULATING STICKS FOR ELECTRICAL OPERATIONS ON HIGH VOLTAGE INSTALLATIONS
I.S. EN 60728-14:2014 CABLE NETWORKS FOR TELEVISION SIGNALS, SOUND SIGNALS AND INTERACTIVE SERVICES - PART 14: OPTICAL TRANSMISSION SYSTEMS USING RFOG TECHNOLOGY
I.S. EN 61000-4-21:2011 ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-21: TESTING AND MEASUREMENT TECHNIQUES - REVERBERATION CHAMBER TEST METHODS
CEI EN 61146-3 : 1998 VIDEO CAMERAS (PAL/SECAM/NTSC) - METHODS OF MEASUREMENT PART 3: NON-BROADCAST CAMERA-RECORDERS
CEI EN 61169-52 : 2016 RADIO-FREQUENCY CONNECTORS - PART 52: SECTIONAL SPECIFICATION FOR SERIES MMCX RF COAXIAL CONNECTORS
CEI EN 60512-23-7 : 2006 CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 23-7: SCREENING AND FILTERING TESTS - TEST 23G: EFFECTIVE TRANSFER IMPEDANCE OF CONNECTORS
CEI EN 62496-2-4 : 2014 OPTICAL CIRCUIT BOARDS - BASIC TEST AND MEASUREMENT PROCEDURES - PART 2-4: OPTICAL TRANSMISSION TEST FOR OPTICAL CIRCUIT BOARDS WITHOUT INPUT/OUTPUT FIBRES
ISO 7076-6:2016 Fire protection — Foam fire extinguishing systems — Part 6: Vehicle mounted compressed air foam systems
I.S. EN 60068-2-39:2016 ENVIRONMENTAL TESTING - PART 2-39: TESTS - TESTS AND GUIDANCE: COMBINED TEMPERATURE OR TEMPERATURE AND HUMIDITY WITH LOW AIR PRESSURE TESTS
I.S. EN 61508-7:2010 FUNCTIONAL SAFETY OF ELECTRICAL/ELECTRONIC/PROGRAMMABLE ELECTRONIC SAFETY-RELATED SYSTEMS - PART 7: OVERVIEW OF TECHNIQUES AND MEASURES
PREN 54-7 : DRAFT 2015 FIRE DETECTION AND FIRE ALARM SYSTEMS - PART 7: SMOKE DETECTORS - POINT DETECTORS USING SCATTERED LIGHT, TRANSMITTED LIGHT OR IONISATION
NF EN 61000-4-14 : 1999 AMD 2 2009 ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-14: TESTING AND MEASUREMENT TECHNIQUES - VOLTAGE FLUCTUATION IMMUNITY TEST
BIS IS/ISO 7240-5 : 2003 FIRE DETECTION AND ALARM SYSTEMS - PART 5: POINT-TYPE HEAT DETECTORS
IEC 62391-1:2015 Fixed electric double-layer capacitors for use in electric and electronic equipment - Part 1: Generic specification
I.S. EN 62575-1:2016 RADIO FREQUENCY (RF) BULK ACOUSTIC WAVE (BAW) FILTERS OF ASSESSED QUALITY - PART 1: GENERIC SPECIFICATION
XP CLC/TS 50131-2-5 : 2005 XP ALARM SYSTEMS - INTRUSION SYSTEMS - PART 2-5: REQUIREMENTS FOR COMBINED PASSIVE INFRARED AND ULTRASONIC DETECTORS
BS EN 60068-2-21:2006 Environmental testing Tests. Test U: Robustness of terminations and integral mounting devices
I.S. EN 50131-2-7-1:2012 ALARM SYSTEMS - INTRUSION AND HOLD-UP SYSTEMS - PART 2-7-1: INTRUSION DETECTORS - GLASS BREAK DETECTORS (ACOUSTIC)
UNE-EN ISO 24534-2:2012 Automatic vehicle and equipment identification - Electronic Registration Identification (ERI) for vehicles - Part 2: Operational requirements (ISO 24534-2:2010)
NF EN 61169-40 : 2011 RADIO-FREQUENCY CONNECTORS - PART 40: SECTIONAL SPECIFICATION FOR 2.4 SERIES RF CONNECTORS
NF EN 60939-3 : 2016 PASSIVE FILTER UNITS FOR ELECTROMAGNETIC INTERFERENCE SUPPRESSION - PART 3: PASSIVE FILTER UNITS FOR WHICH SAFETY TESTS ARE APPROPRIATE
OIML R 35-1 : 2007 AMD 2014 MATERIAL MEASURES OF LENGTH FOR GENERAL USE - PART 1: METROLOGICAL AND TECHNICAL REQUIREMENTS
I.S. EN 61248-1:1998 TRANSFORMERS AND INDUCTORS FOR USE IN ELECTRONIC AND TELECOMMUNICATION EQUIPMENT - PART 1: GENERIC SPECIFICATION
14/30274689 DC : 0 BS EN 54-20 - FIRE DETECTION AND FIRE ALARM SYSTEMS - PART 20: ASPIRATING SMOKE DETECTORS
I.S. EN 61988-3-2:2009 PLASMA DISPLAY PANELS - PART 3-2: INTERFACE - ELECTRICAL INTERFACE
BS EN 61076-1:2006 Connectors for electronic equipment. Product requirements Generic specification
NF EN 60939-1 : 2011 PASSIVE FILTER UNITS FOR ELECTROMAGNETIC INTERFERENCE SUPPRESSION - PART 1: GENERIC SPECIFICATION
NF EN 61000 4-2 : 2009 ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-2: TESTING AND MEASUREMENT TECHNIQUES - ELECTROSTATIC DISCHARGE IMMUNITY TEST
NF EN 62813 : 2015 LITHIUM ION CAPACITORS FOR USE IN ELECTRIC AND ELECTRONIC EQUIPMENT - TEST METHODS FOR ELECTRICAL CHARACTERISTICS
NF EN 60068-2-1 : 2007 ENVIRONMENTAL TESTING - PART 2-1: TESTS - TESTS A: COLD
IEC 61253-1:1993 Piezoelectric ceramic resonators - A specification in the IEC quality assessment system for electronic components (IECQ) - Part 1: Generic specification - Qualification approval
IEC 62642-2-3:2010 Alarm systems - Intrusion and hold-up systems - Part 2-3: Intrusion detectors - Microwave detectors
I.S. EN 61988-4:2007 PLASMA DISPLAY PANELS - PART 4: CLIMATIC AND MECHANICAL TESTING METHODS
CEI EN 61076-3-106 : 2007 CONNECTORS FOR ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 3-106: RECTANGULAR CONNECTORS - DETAIL SPECIFICATION FOR PROTECTIVE HOUSINGS FOR USE WITH 8-WAY SHIELDED AND UNSHIELDED CONNECTORS FOR INDUSTRIAL ENVIRONMENTS INCORPORATING THE IEC 60603-7 SERIES INTERFACE
UNE-EN 60728-3:2012 Cable networks for television signals, sound signals and interactive services - Part 3: Active wideband equipment for cable networks
NF EN 60384-23 : 2015 FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 23: SECTIONAL SPECIFICATION - FIXED SURFACE MOUNT METALLIZED POLYETHYLENE NAPHTHALATE FILM DIELECTRIC DC CAPACITORS
NF EN 61000-4-21 : 2011 ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-21: TESTING AND MEASUREMENT TECHNIQUES - REVERBERATION CHAMBER TEST METHODS
NF EN 60115-2 : 2015 FIXED RESISTORS FOR USE IN ELECTRONIC EQUIPMENT - PART 2: SECTIONAL SPECIFICATION: LEADED FIXED LOW POWER FILM RESISTORS
I.S. EN 61076-4-103:1999 CONNECTORS FOR USE IN D.C. LOW-FREQUENCY ANALOGUE AND DIGITAL HIGH SPEED DATA APPLICATIONS - PART 4-103: PRINTED BOARD CONNECTORS WITH ASSESSED QUALITY - DETAIL SPECIFICATION FOR TWO-PART CONNECTORS WITH SHIELDING AND A BASIC GRID OF 2.5 MM
I.S. EN 129200:1994 SECTIONAL SPECIFICATION: FIXED INDUCTORS WITH CERAMIC OR FERRITE CORE WOUND WITH COPPER WIRE FOR RF CIRCUITS
I.S. EN 60939-1:2010 PASSIVE FILTER UNITS FOR ELECTROMAGNETIC INTERFERENCE SUPPRESSION - PART 1: GENERIC SPECIFICATION
IEC 62908-12-10:2017 Touch and interactive displays - Part 12-10: Measurement methods of touch displays - Touch and electrical performance
I.S. EN 60068-2-81:2003 ENVIRONMENTAL TESTING - PART 2-81: TESTS - TEST EI: SHOCK - SHOCK RESPONSE SPECTRUM SYNTHESIS
IEC 60748-23-1:2002 Semiconductor devices - Integrated circuits - Part 23-1: Hybrid integrated circuits and film structures - Manufacturing line certification - Generic specification
IEC 60605-3-3:1992 Equipment reliability testing - Part 3: Preferred test conditions - Section 3: Test Cycle 3: Equipment for stationary use in partially weatherprotected locations - Low degree of simulation
IEC 60050-581:2008 International Electrotechnical Vocabulary (IEV) - Part 581: Electromechanical components for electronic equipment
EN 60068-2-21:2006 Environmental testing - Part 2-21: Tests - Test U: Robustness of terminations and integral mounting devices
I.S. EN 60849:1999 SOUND SYSTEMS FOR EMERGENCY PURPOSES
IEC PAS 61076-3-117:2006 Connectors for electronic equipment - Product requirements - Part 3-117: Rectangular connectors - Protective housings for use with 8-way shielded and unshielded connectors for frequencies up to 600 MHz for industrial environments incorporating IEC 60603-7 - Variant 14 related to IEC 61076-3-106 - Push-pull coupling
IEC 61189-5-503:2017 Test methods for electrical materials, printed board and other interconnection structures and assemblies - Part 5-503: General test method for materials and assemblies - Conductive anodic filaments (CAF) testing of circuit boards
I.S. EN 61215:2005 CRYSTALLINE SILICON TERRESTRIAL PHOTOVOLTAIC (PV) MODULES - DESIGN QUALIFICATION AND TYPE APPROVAL
IEC 60728-3 : 5.0 CABLE NETWORKS FOR TELEVISION SIGNALS, SOUND SIGNALS AND INTERACTIVE SERVICES - PART 3: ACTIVE WIDEBAND EQUIPMENT FOR CABLE NETWORKS
NF EN 62391-1 : 2018 FIXED ELECTRIC DOUBLE-LAYER CAPACITORS FOR USE IN ELECTRIC AND ELECTRONIC EQUIPMENT - PART 1: GENERIC SPECIFICATION
NF EN 60122-1 : 2003 QUARTZ CRYSTAL UNITS OF ASSESSED QUALITY - PART 1: GENERIC SPECIFICATION
IEC 60384-17:2005 Fixed capacitors for use in electronic equipment - Part 17: Sectional specification: Fixed metallized polypropylene film dielectric a.c. and pulse capacitors
16/30330036 DC : 0 BS EN 62788-2 - MEASUREMENT PROCEDURES FOR MATERIALS USED IN PHOTOVOLTAIC MODULES - PART 2: POLYMERIC MATERIALS USED FOR FRONTSHEETS AND BACKSHEETS
IEC 61747-5:1998 Liquid crystal and solid-state display devices - Part 5: Environmental, endurance and mechanical test methods
IEC 62246-1:2015 Reed switches - Part 1: Generic specification
IEC 62319-1:2005 Polymeric thermistors - Directly heated positive step function temperature coefficient - Part 1: Generic specification
BS IEC 62852 : 2014 CONNECTORS FOR DC-APPLICATION IN PHOTOVOLTAIC SYSTEMS - SAFETY REQUIREMENTS AND TESTS
IEC 61180-2:1994 High-voltage test techniques for low-voltage equipment - Part 2: Test equipment
14/30309696 DC : 0 BS EN 60068-2-69 ED 3.0 - ENVIRONMENTAL TESTING - PART 2-69: TESTS - TEST TE: SOLDERABILITY TESTING OF ELECTRONIC COMPONENTS AND BOARDS BY THE WETTING BALANCE (FORCE MEASUREMENT) METHOD
IEC 61076-4-111:2002 Connectors for electronic equipment - Part 4-111: Printed board connectors with assessed quality - Detail specification for two-part power connector modules, for printed boards and backplanes having early mating features, and having a basic grid of 2,5 mm in accordance with IEC 60917-1
BS CECC 11000(1980) : 1980 AMD 7600 HARMONIZED SYSTEM OF QUALITY ASSESSMENT FOR ELECTRONIC COMPONENTS - GENERIC SPECIFICATION - CATHODE RAY TUBES
13/30238229 DC : 0 BS EN 62052-31 - ELECTRICITY METERING EQUIPMENT (AC) - GENERAL REQUIREMENTS, TEST AND TEST CONDITIONS - PART 31: PRODUCT SAFETY REQUIREMENTS
IEC 61000-5-7:2001 Electromagnetic compatibility (EMC) - Part 5-7: Installation and mitigation guidelines - Degrees of protection provided by enclosures against electromagnetic disturbances (EM code)
IEC 60068-2-64:2008 Environmental testing - Part 2-64: Tests - Test Fh: Vibration, broadband random and guidance
IEC 60839-11-1:2013 Alarm and electronic security systems - Part 11-1: Electronic access control systems - System and components requirements
IEC 60835-1-1:1990 Methods of measurement for equipment used in digital microwave radio transmission systems. Part 1: Measurements common to terrestrial radio-relay systems and satellite earth stations - Section One: General
IEC 61076-2-105:2008 Connectors for electronic equipment - Product requirements - Part 2-105: Circular connectors - Detail specification for M5 connectors with screw-locking
IEC 60068-2-80:2005 Environmental testing - Part 2-80: Tests - Test Fi: Vibration - Mixed mode
IEC 61000-4-13:2002+AMD1:2009+AMD2:2015 CSV Electromagnetic compatibility (EMC) - Part 4-13: Testing and measurement techniques - Harmonics and interharmonics includingmains signalling at a.c. power port, low frequency immunity tests
EN 61076-5 : 2001 CONNECTORS FOR USE IN D.C., LOW-FREQUENCY ANALOGUE AND DIGITAL HIGH-SPEED DATA APPLICATIONS - PART 5: IN-LINE SOCKETS WITH ASSESSED QUALITY - SECTIONAL SPECIFICATION
EN 50528:2010 Insulating ladders for use on or near low voltage electrical installations
EN 61300-2-9:2017 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-9: Tests - Shock
IEC 60384-1:2016 RLV Fixed capacitors for use in electronic equipment - Part 1: Generic specification
EN 60512-9-3:2011 CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 9-3: ENDURANCE TESTS - TEST 9C: MECHANICAL OPERATION (ENGAGING/SEPARATING) WITH ELECTRICAL LOAD
EN 62052-31:2016 Electricity metering equipment (AC) - General requirements, tests and test conditions - Part 31: Product safety requirements and tests
NF EN 60384-16 : 2006 FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 16: SECTIONAL SPECIFICATION: FIXED METALLIZED POLYPROPYLENE FILM DIELECTRIC D.C. CAPACITORS
EN 175301-801:2006 Detail Specification: High density rectangular connectors, round removable crimp contacts
EN 61000-4-8:2010 Electromagnetic compatibility (EMC) - Part 4-8: Testing and measurement techniques - Power frequency magnetic field immunity test
EN 60384-22:2012 Fixed capacitors for use in electronic equipment - Part 22: Sectional specification - Fixed surface mount multilayer capacitors of ceramic dielectric, Class 2
DIN EN 54-17:2006-03 Fire detection and fire alarm systems - Part 17: Short-circuit isolators
DIN 19217:1997-11 MEASURING SYSTEMS FOR LIQUIDS OTHER THAN WATER - CONCEPTS, REQUIREMENTS AND TESTING
IEC 60068-3-5:2018 RLV Environmental testing - Part 3-5: Supporting documentation and guidance - Confirmation of the performance of temperature chambers
EN 61337-1:2004 Filters using waveguide type dielectric resonators - Part 1: Generic specification
EN 61169-52:2015 Radio-frequency connectors - Part 52: Sectional specification for series MMCX RF coaxial connectors
DIN EN 14154-2:2011-06 WATER METERS - PART 2: INSTALLATION AND CONDITIONS OF USE
EN 62197-1 : 2006 CONNECTORS FOR ELECTRONIC EQUIPMENT - QUALITY ASSESSMENT REQUIREMENTS - PART 1: GENERIC SPECIFICATION
EN 61000-4-13:2002/A2:2016 ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-13: TESTING AND MEASUREMENT TECHNIQUES - HARMONICS AND INTERHARMONICS INCLUDING MAINS SIGNALLING AT A.C. POWER PORT, LOW FREQUENCY IMMUNITY TESTS (IEC 61000-4-13:2002/A2:2015)
EN 62137-1-2:2007 Surface mounting technology - Environmental and endurance test methods for surface mount solder joint - Part 1-2: Shear strength test
EN 61076-7-100 : 2006 CONNECTORS FOR ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 7-100: CABLE OUTLET ACCESSORIES - DETAIL SPECIFICATION FOR A METRIC CABLE SEALING CONSISTING OF AN INTEGRATED PART OF HEAVY-DUTY RECTANGULAR OR CIRCULAR CONNECTOR HOODS AND A SEALING SYSTEM
EN 61811-51:2002 Electromechanical all-or-nothing relays - Part 51: Blank detail specification - Electromechanical all-or-nothing telecom relays of assessed quality - Non-standardized types and construction
EN 61189-5-1:2016 Test methods for electrical materials, printed boards and other interconnection structures and assemblies - Part 5-1: General test methods for materials and assemblies - Guidance for printed board assemblies
EN 60512-25-9 : 2008 CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 25-9: SIGNAL INTEGRITY TESTS - TEST 25I: ALIEN CROSSTALK
EN 61076-4-101:2001 Connectors for electronic equipment - Part 4-101: Printed board connectors with assessed quality - Detail specification for two-part connector modules, having a basic grid of 2,0 mm for printed boards and backplanes in accordance with IEC 60917
EN 61076-4-108:2002 Connectors for electronic equipment - Part 4-108: Printed board connectors with assessed quality - Detail specification for cable-to-board connectors, with a modular pitch of 25 mm and integrated shielding function, applicable for transverse packing density of 15 mm, having a basic grid of 2,5 mm in accordance with IEC 60917-1
EN 60603-7-5:2010 Connectors for electronic equipment - Part 7-5: Detail specification for 8-way, shielded, free and fixed connectors, for data transmissions with frequencies up to 250 MHz
EN 61643-331:2003 Components for low-voltage surge protective devices - Part 331: Specification for metal oxide varistors (MOV)
EN 153000:1998 Generic specification: Discrete pressure contact power semiconductor devices (Qualification approval)
CLC/TS 50131-3:2003 Alarm systems - Intrusion systems - Part 3: Control and indicating equipment
EN 61112:2009 Live working - Electrical insulating blankets
EN 61076-3-114 : 2009 Connectors for electronic equipment - Product requirements - Part 3-114: Rectangular connectors - Detail specification for protective housings for use with 8-way shielded and unshielded connectors for frequencies up to 600 MHz for industrial environments incorporating the IEC 60603-7 series interface - Variant 11 related to IEC 61076-3-106 - Bayonet coupling type
EN 61753-052-6:2016 Fibre optic interconnecting devices and passive components - Performance standard - Part 052-6: Single-mode fibre non-connectorized fixed attenuator - Category O in outside plant environment
EN 60728-14:2014 Cable networks for television signals, sound signals and interactive services - Part 14: Optical transmission systems using RFoG technology
EN 61988-2-1:2012 Plasma display panels - Part 2-1: Measuring methods - Optical and optoelectrical
EN 61019-1 : 2005 Surface acoustic wave (SAW) resonators - Part 1: Generic specification
EN 61000-4-20:2010 ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-20: TESTING AND MEASUREMENT TECHNIQUES - EMISSION AND IMMUNITY TESTING IN TRANSVERSE ELECTROMAGNETIC (TEM) WAVEGUIDES
EN 61010-2-012:2016 Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-012: Particular requirements for climatic and environmental testing and other temperature conditioning equipment
EN 61169-49:2014 Radio-frequency connectors - Part 49: Sectional specification for SMAA series R.F connectors
EN 62246-1:2015 Reed switches - Part 1: Generic specification
EN 61300-2-20 : 1997 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - BASIC TEST AND MEASUREMENT PROCEDURES - PART 2-20: TESTS - CLIMATIC SEQUENCE
EN 60384-18:2016 Fixed capacitors for use in electronic equipment - Part 18: Sectional specification - Fixed aluminium electrolytic surface mount capacitors with solid (MnO2) and non-solid electrolyte
EN 60384-8:2015/AC:2017-09 FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 8: SECTIONAL SPECIFICATION: FIXED CAPACITORS OF CERAMIC DIELECTRIC, CLASS 1 (IEC 60384-8:2015/COR1:2017)
EN 62137-1-4:2009 Surface mounting technology - Environmental and endurance test methods for surface mount solder joint - Part 1-4: Cyclic bending test
EN 60384-3:2016 Fixed capacitors for use in electronic equipment - Part 3: Sectional specification - Surface mount fixed tantalum electrolytic capacitors with solid (MnO2) electrolyte
EN 61305-1:1995 Household high-fidelity audio equipment and systems - Methods of measuring and specifying the performance - Part 1: General
EN 140402-801:2015 Detail specification: Fixed low power wirewound surface mount (SMD) resistors - Rectangular - Stability classes 0,5; 1; 2
EN 196000 : 92 AMD 1 2001 HARMONIZED SYSTEM OF QUALITY ASSESSMENT FOR ELECTRONIC COMPONENTS - GENERIC SPECIFICATION: ELECTROMECHANICAL SWITCHES
EN 62813:2015 Lithium ion capacitors for use in electric and electronic equipment - Test methods for electrical characteristics
EN 134000:1994 Generic Specification: Variable capacitors (Qualification approval and capability approval)
EN 61111 : 2009 LIVE WORKING - ELECTRICAL INSULATING MATTING
EN 50130-5:2011 ALARM SYSTEMS - PART 5: ENVIRONMENTAL TEST METHODS
CEN ISO/TS 24534-2:2007 Automatic vehicle and equipment identification - Electronic Registration Identification (ERI) for vehicles - Part 2: Operational requirements (ISO/TS 24534-2:2007)
EN 50132-5-3:2012 Alarm systems - CCTV surveillance systems for use in security applications - Part 5-3: Video transmission - Analogue and digital video transmission
EN 62333-3:2010 Noise suppression sheet for digital devices and equipment - Part 3: Characterization of parameters of noise suppression sheet
EN ISO 24534-2:2010 Automatic vehicle and equipment identification - Electronic Registration Identification (ERI) for vehicles - Part 2: Operational requirements (ISO 24534-2:2010)
EN 60068-2-50:1999 Environmental testing - Part 2: Tests - Tests Z/AFc: Combined cold/vibration (sinusoidal) tests for both heat-dissipating and non-heat-dissipating specimens
EN 60384-6 : 2005 FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 6: SECTIONAL SPECIFICATION - FIXED METALLIZED POLYCARBONATE FILM DIELECTRIC D.C. CAPACITORS
EN 61189-2:2006 Test methods for electrical materials, printed boards and other interconnection structures and assemblies - Part 2: Test methods for materials for interconnection structures
EN 61988-2-5 : 2012 PLASMA DISPLAY PANELS - PART 2-5: MEASURING METHODS - ACOUSTIC NOISE
IEC 60068-3-6:2018 RLV Environmental testing - Part 3-6: Supporting documentation and guidance - Confirmation of the performance of temperature/ humidity chambers
EN 61076-3-116 : 2008 CONNECTORS FOR ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 3-116: RECTANGULAR CONNECTORS - DETAIL SPECIFICATION FOR PROTECTIVE HOUSINGS FOR USE WITH 8-WAY SHIELDED AND UNSHIELDED CONNECTORS FOR FREQUENCIES UP TO 600 MHZ FOR INDUSTRIAL ENVIRONMENTS INCORPORATING THE IEC 60603-7 SERIES INTERFACE - VARIANT 13 RELATED TO IEC 61076-3-106 - LOCKING LEVER
EN 60939-1:2010 PASSIVE FILTER UNITS FOR ELECTROMAGNETIC INTERFERENCE SUPPRESSION - PART 1: GENERIC SPECIFICATION
EN 61215:2005 Crystalline silicon terrestrial photovoltaic (PV) modules - Design qualification and type approval
NF EN 60352-5 : 2012 SOLDERLESS CONNECTIONS - PART 5: PRESS-IN CONNECTIONS - GENERAL REQUIREMENTS, TEST METHODS AND PRACTICAL GUIDANCE
EN 61076-4-105:1998 Connectors with assessed quality, for use in d.c., low frequency analogue and in digital high-speed data applications - Part 4: Printed board connectors - Section 105: Detail specification for 9 mm circular connector with 3 to 8 contacts for use in a wide range of applications including the telecommunication and audio industry
EN 60835-1-1:1992 Methods of measurement for equipment used in digital microwave radio transmission systems - Part 1: Measurements common to terrestrial radio-relay systems and satellite earth stations - Section 1: General
EN 61169-26:2013 Radio-frequency connectors - Part 26: Sectional specification for TNCA series RF coaxial connectors
EN 60689:2009 Measurement and test methods for tuning fork quartz crystal units in the range from 10 kHz to 200 kHz and standard values
EN 61189-6:2006 Test methods for electrical materials, interconnection structures and assemblies - Part 6: Test methods for materials used in manufacturing electronic assemblies
EN 61076-2:2011 Connectors for electronic equipment - Product requirements - Part 2: Sectional specification for circular connectors
EN 61076-4-114:2003 Connectors for electronic equipment - Part 4-114: Printed board connectors - Detail specification for two-part connector with integrated shielding function having a grid of 1 mm x 1,5 mm
EN 60603-13:1998 Connectors for frequencies below 3 MHz for use with printed boards - Part 13: Detail specification for two-part connectors of assessed quality, for printed boards for basic grid of 2,54 mm (0,1 in), with free connectors for non-accessible insulation displacement terminations (ID)
EN 61747-5:1998 Liquid crystal and solid-state display devices - Part 5: Environmental, endurance and mechanical test methods
EN 60505:2011/AC:2017-03 EVALUATION AND QUALIFICATION OF ELECTRICAL INSULATION SYSTEMS (IEC 60505:2011/COR1:2017)
EN 62496-2-2:2011 Optical circuit boards - Part 2-2: Measurements - Dimensions of optical circuit boards
EN 61180:2016 High-voltage test techniques for low-voltage equipment - Definitions, test and procedure requirements, test equipment
EN 61146-3:1997 Video cameras (PAL/SECAM/NTSC) - Methods of measurement - Part 3: Non-broadcast camera-recorders
EN 61180-2:1994 High-voltage test techniques for low-voltage equipment - Part 2: Test equipment
EN 129000:1993/A1:1995 GENERIC SPECIFICATION - FIXED RF WOUND INDUCTORS
EN 62341-5:2009 Organic Light Emitting Diode (OLED) displays - Part 5: Environmental testing methods
EN 60068-2-70:1996 Environmental testing - Part 2: Tests - Test Xb: Abrasion of markings and letterings caused by rubbing of fingers and hands
DIN EN ISO 4064-2:2017-10 WATER METERS FOR COLD POTABLE WATER AND HOT WATER - PART 2: TEST METHODS (ISO 4064-2:2014)
EN 60728-13:2010 Cable networks for television signals, sound signals and interactive services - Part 13: Optical systems for broadcast signal transmissions
EN 62040-5-3:2017 Uninterruptible power systems (UPS) - Part 5-3: DC output UPS - Performance and test requirements
EN 61076-2-106:2011 Connectors for electronic equipment - Product requirements - Part 2-106: Circular connectors - Detail specification for connectors M 16 x 0,75 with screw-locking and degree of protection IP40 or IP65/67
EN 60068-2-81:2003 Environmental testing - Part 2-81: Tests - Test Ei: Shock - Shock response spectrum synthesis
NF EN 62025-2 : 2005 HIGH FREQUENCY INDUCTIVE COMPONENTS - NON-ELECTRICAL CHARACTERISTICS AND MEASURING METHODS - PART 2: TEST METHODS FOR NON-ELECTRICAL CHARACTERISTICS
EN 60068-2-42:2003 Environmental testing - Part 2-42: Tests - Test Kc: Sulphur dioxide test for contacts and connections
EN 61051-1:2008 Varistors for use in electronic equipment - Part 1: Generic specification
EN 60068-2-5:2011 Environmental testing - Part 2-5: Tests - Test Sa: Simulated solar radiation at ground level and guidance for solar radiation testing
EN 61753-111-9:2010 Fibre optic interconnecting devices and passive components - Performance standard - Part 111-9: Sealed closures for category S - Subterranean
EN 60839-11-1:2013/AC:2015 ALARM AND ELECTRONIC SECURITY SYSTEMS - PART 11-1: ELECTRONIC ACCESS CONTROL SYSTEMS - SYSTEM AND COMPONENTS REQUIREMENTS (IEC 60839-11-1:2013)
EN 62137-1-3:2009 Surface mounting technology - Environmental and endurance test methods for surface mount solder joint - Part 1-3: Cyclic drop test
EN 60747-5-3:2001/A1:2002 DISCRETE SEMICONDUCTOR DEVICES AND INTEGRATED CIRCUITS - PART 5-3: OPTOELECTRONIC DEVICES - MEASURING METHODS
EN 62586-1:2017 Power quality measurement in power supply systems - Part 1: Power quality instruments (PQI)
EN 60758:2016 Synthetic quartz crystal - Specifications and guidelines for use
EN 12101-10:2005/AC:2007 SMOKE AND HEAT CONTROL SYSTEMS - PART 10: POWER SUPPLIES
EN 60738-1:2006/A1:2009 THERMISTORS - DIRECTLY HEATED POSITIVE TEMPERATURE COEFFICIENT - PART 1: GENERIC SPECIFICATION
EN 61811-54:2002 Electromechanical all-or-nothing relays - Part 54: Blank detail specification - Electromechanical all-or-nothing telecom relays of assessed quality - Two change-over contacts, 15 mm x 7,5 mm base
EN 61076-4-103:1999 Connectors for use in d.c. low-frequency analogue and digital high speed data applications - Part 4-103: Printed board connectors with assessed quality - Detail specification for two-part connectors with shielding and a basic grid of 2,5 mm
EN 62604-1:2015 Surface acoustic wave (SAW) and bulk acoustic wave (BAW) duplexers of assessed quality - Part 1: Generic specification
EN 61076-4-102:1997 Connectors with assessed quality, for use in d.c., low-frequency analogue and in digital high speed data applications - Part 4: Printed board connectors - Section 102: Detail specification for two-part single-pole connectors, for multiple uses on plug-in units, with pre-centring, coding and early mating features, having a metric grid in accordance with IEC 60917
EN 60068-2-7:1993 Environmental testing - Part 2: Tests - Test Ga: Acceleration, steady state
EN 60068-2-47:2005 Environmental testing - Part 2-47: Tests - Mounting of specimens for vibration, impact and similar dynamic tests
EN 60195:2016 Method of measurement of current noise generated in fixed resistors
EN 50131-10:2014 Alarm systems - Intrusion and hold-up systems - Part 10: Application specific requirements for Supervised Premises Transceiver (SPT)
EN 62137-1-5:2009 Surface mounting technology - Environmental and endurance test methods for surface mount solder joints - Part 1-5: Mechanical shear fatigue test
EN 60068-3-4:2002 Environmental testing - Part 3-4: Supporting documentation and guidance - Damp heat tests
EN 60384-20:2015 Fixed capacitors for use in electronic equipment - Part 20: Sectional specification - Fixed metallized polyphenylene sulfide film dielectric surface mount d.c. capacitors
EN 61965:2003 Mechanical safety of cathode ray tubes
EN 61730-2:2007/A1:2012 PHOTOVOLTAIC (PV) MODULE SAFETY QUALIFICATION - PART 2: REQUIREMENTS FOR TESTING (IEC 61730-2:2004/A1:2011)
EN 61337-1-1 : 1997 FILTERS USING WAVEGUIDE TYPE DIELECTRIC RESONATORS - GENERAL INFORMATION, STANDARD VALUES AND TEST CONDITIONS - GENERAL INFORMATION AND STANDARD VALUES
EN 61076-2-104:2014 Connectors for electronic equipment - Product requirements - Part 2-104: Circular connectors - Detail specification for circular connectors with M8 screw-locking or snap-locking
EN 60512-12-6 : 1996 Electromechanical components for electronic equipment - Basic testing procedures and measuring methods - Part 12: Soldering tests - Section 6: Test 12f: Sealing against flux and cleaning solvents in machine soldering
EN 61753-101-3:2008 Fibre optic interconnecting devices and passive components performance standard - Part 101-3: Fibre management systems for Category U - Uncontrolled environment
EN 62271-202:2014/AC:2014 HIGH-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 202: HIGH-VOLTAGE/LOW-VOLTAGE PREFABRICATED SUBSTATION (IEC 62271-202:2014)
EN 60115-2:2015 Fixed resistors for use in electronic equipment - Part 2: Sectional specification: Leaded fixed low power film resistors
EN 50102:1995/corrigendum Jul. 2002 DEGREES OF PROTECTION PROVIDED BY ENCLOSURES FOR ELECTRICAL EQUIPMENT AGAINST EXTERNAL MECHANICAL IMPACTS (IK CODE)
EN 61076-1:2006 Connectors for electronic equipment - Product requirements - Part 1: Generic specification
EN 60068-2-40:1999 Environmental testing - Part 2: Tests - Test Z/AM: Combined cold/low air pressure tests
EN 61189-5-503:2017 Test methods for electrical materials, printed board and other interconnection structures and assemblies - Part 5-503: General test method for materials and assemblies - Conductive anodic filaments (CAF) testing of circuit boards
EN 61481-1:2014 Live working - Phase comparators - Part 1: Capacitive type to be used for voltages exceeding 1 kV a.c.
EN 62496-2-4 : 2013 OPTICAL CIRCUIT BOARDS - BASIC TEST AND MEASUREMENT PROCEDURES - PART 2-4: OPTICAL TRANSMISSION TEST FOR OPTICAL CIRCUIT BOARDS WITHOUT INPUT/OUTPUT FIBRES (IEC 62496-2-4:2013)
EN 62718:2016 Railway applications - Rolling stock - DC supplied electronic ballasts for lighting fluorescent lamps
EN 60746-1:2003 Expression of performance of electrochemical analyzers - Part 1: General
EN 62137:2004/corrigendum:2005 ENVIRONMENTAL AND ENDURANCE TESTING - TEST METHODS FOR SURFACE-MOUNT BOARDS OF AREA ARRAY TYPE PACKAGES FBGA, BGA, FLGA, LGA, SON AND QFN
EN 61189-1 : 97 AMD 1 2001 TEST METHODS FOR ELECTRICAL MATERIALS, INTERCONNECTION STRUCTURES AND ASSEMBLIES - PART 1: GENERAL TEST METHODS AND METHODOLOGY
EN 62878-1-1:2015 Device embedded substrate - Part 1-1: Generic specification - Test methods
EN 60068-2-62 : 1995 ENVIRONMENTAL TESTING - PART 2: TEST METHODS - TEST EF: IMPACT, PENDULUM METHOD
EN 50130-4:2011/A1:2014 ALARM SYSTEMS - PART 4: ELECTROMAGNETIC COMPATIBILITY - PRODUCT FAMILY STANDARD: IMMUNITY REQUIREMENTS FOR COMPONENTS OF FIRE, INTRUDER, HOLD UP, CCTV, ACCESS CONTROL AND SOCIAL ALARM SYSTEMS
EN 61189-5-3:2015 Test methods for electrical materials, printed boards and other interconnection structures and assemblies - Part 5-3: General test methods for materials and assemblies - Soldering paste for printed board assemblies
EN 60068-2-63 : 1994 ENVIRONMENTAL TESTING - PART 2: TEST METHODS - TEST EG: IMPACT, SPRING HAMMER
EN 61076-7:2000 Connectors for use in d.c., low-frequency analogue and digital high speed data applications - Part 7: Cable outlet accessories with assessed quality, including qualification and capability approval - Sectional specification
EN 60068-2-41:1999 Environmental testing - Part 2: Tests - Test Z/BM: Combined dry heat/low air pressure tests
EN 62674-1 : 2012 HIGH FREQUENCY INDUCTIVE COMPONENTS - PART 1: FIXED SURFACE MOUNT INDUCTORS FOR USE IN ELECTRONIC AND TELECOMMUNICATION EQUIPMENT (IEC 62674-1:2012)
EN 50311:2003 Railway applications - Rolling stock - D.C. supplied electronic ballasts for lighting fluorescent lamps
EN 140402:2015/A1:2016 BLANK DETAIL SPECIFICATION: FIXED LOW POWER WIREWOUND SURFACE MOUNT (SMD) RESISTORS
EN 61076-4-113:2003 Connectors for electronic equipment - Printed board connectors - Part 4-113: Detail specification for two-part connectors having 5 rows with a grid of 2,54 mm for printed boards and backplanes in bus applications
EN 61313-1:1997 Fibre optic passive components and cable assemblies - Part 1: Capability approval - Generic specification
EN 62319-1:2005 Polymeric thermistors - Directly heated positive step function temperature coefficient - Part 1: Generic specification
EN 60384-23:2015 Fixed capacitors for use in electronic equipment - Part 23: Sectional specification - Fixed surface mount metallized polyethylene naphthalate film dielectric DC capacitors
EN 61753-111-7:2010 Fibre optic interconnecting devices and passive components - Performance standard - Part 111-7: Sealed closures for category A - Aerial
EN 61076-4-110:2002 Connectors for electronic equipment - Part 4-110: Printed board connectors with assessed quality - Detail specification for latched cable connector system having a basic grid of 2,0 mm including full shielding and latching function
EN 187000 : 92 AMD 1 95 GENERIC SPECIFICATION: OPTICAL FIBRE CABLES
EN 133000:1997 Generic Specification: Passive filter units for electromagnetic interference suppression
EN 181000:1994 Generic Specification: Fibre optic branching devices
EN 180000:1995 Generic specification: Fibre optic attenuators
EN 117000:1991 Generic Specification: Solid state all-or-nothing relays of assessed quality - Generic data and methods of test
EN 168000 : 1993 AMD 2 1998 GENERIC SPECIFICATION - QUARTZ CRYSTAL UNITS
DIN EN 54-3:2014-09 FIRE DETECTION AND FIRE ALARM SYSTEMS - PART 3: FIRE ALARM DEVICES - SOUNDERS
BS CECC 00802:1991 Harmonized system of quality assessment for electronic components. Guidance document: CECC standard method for the specification of surface mounting components (SMDs) of assessed quality
DIN EN 54-22 E : 2015 FIRE DETECTION AND FIRE ALARM SYSTEMS - PART 22: RESETTABLE LINE-TYPE HEAT DETECTORS
12/30264867 DC : 0 BS EN 61076-2-104 - CONNECTORS FOR ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 2-104: CIRCULAR CONNECTORS - DETAIL SPECIFICATION FOR CIRCULAR CONNECTORS WITH M8 SCREW-LOCKING OR SNAP-LOCKING
BS QC 880000-1(1995) : 1995 AMD 9689 HARMONIZED SYSTEM OF QUALITY ASSESSMENT FOR ELECTRONIC COMPONENTS - FIBRE OPTIC FAN-OUTS - GENERIC SPECIFICATION
NF EN 62341-5 : 2010 ORGANIC LIGHT EMITTING DIODE (OLED) DISPLAYS - PART 5: ENVIRONMENTAL TESTING METHODS
NF EN 61000-4-17 : 1999 AMD 2 2009 ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-17: TESTING AND MEASUREMENT TECHNIQUES - RIPPLE ON D.C. INPUT POWER PORT IMMUNITY TEST
BS EN 61337-1:2004 Filters using waveguide type dielectric resonators Generic specification
DD IEC/PAS 61076-2-110:2010 Connectors for electronic equipment. Product requirements Circular connectors. Detail specification for circular connectors M 12 x 1 with screw-locking, for high speed Ethernet and high speed data communication with frequencies up to 500 MHz and 10 gigabits/s
12/30268003 DC : 0 BS EN 60939-3 - PASSIVE FILTER UNITS FOR ELECTROMAGNETIC INTERFERENCE SUPPRESSION - PART 3: HARMONIZED STANDARD FOR PASSIVE FILTER UNITS FOR WHICH SAFETY TESTS ARE APPROPRIATE
12/30255394 DC : DRAFT APR 2012 BS EN 62586-1 - POWER QUALITY MEASUREMENT IN POWER SUPPLY SYSTEMS - POWER QUALITY INSTRUMENTS (PQI)
PD IEC/TR 60721-4-4:2002 Classification of environmental conditions. Guidance for the correlation and transformation of environmental condition classes of IEC 60721-3 to the environmental tests of IEC 60068 Stationary use at non-weatherprotected locations
01/209168 DC : DRAFT DEC 2001 IEC 61988-2-2 ED.1 - PLASMA DISPLAY PANELS - PART 2-2: MEASURING METHODS - OPTOELECTRICAL
VDE 0828-1 : 2017-11 SOUND SYSTEMS FOR EMERGENCY PURPOSES
I.S. EN 61196-10:2016 COAXIAL COMMUNICATION CABLES - PART 10: SECTIONAL SPECIFICATION FOR SEMI-RIGID CABLES WITH POLYTETRAFLUOROETHYLENE (PTFE) DIELECTRIC
CEI 13-32 : 2000 WATT-VAR-HOUR METERS FOR LOW-VOLTAGE THREE-PHASE NETWORKS (INTEGRATED UNITS) PRESETTED FOR PROCESSING AND REMOTE MANAGEMENT OF DATA WITH OR WITHOUT INSERTION OF CURRENT TRANSFORMERS
I.S. EN 61076-2-106:2011 CONNECTORS FOR ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 2-106: CIRCULAR CONNECTORS - DETAIL SPECIFICATION FOR CONNECTORS M 16 X 0,75 WITH SCREW-LOCKING AND DEGREE OF PROTECTION IP40 OR IP65/67
03/318812 DC : DRAFT NOV 2003 IEC 62257-3 TS ED.1 - RECOMMENDATIONS FOR SMALL RENEWABLE ENERGY AND HYBRID SYSTEMS FOR RURAL ELECTRIFICATION - PART 3: PROJECT DEVELOPMENT AND MANAGEMENT
I.S. EN 61076-3-118:2010 CONNECTORS FOR ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 3-118: RECTANGULAR CONNECTORS - DETAIL SPECIFICATION FOR A 4 POLE + PE POWER CONNECTOR WITH PUSH-PULL COUPLING
12/30254691 DC : DRAFT MAR 2012 BS ISO 16525-7 - ADHESIVES - TEST METHODS FOR ISOTROPICALLY ELECTRICALLY CONDUCTING ADHESIVES - PART 7: ENVIRONMENTAL TEST METHODS
BS EN 61076-2-106:2011 Connectors for electronic equipment. Product requirements Circular connectors. Detail specification for connectors M 16 x 0,75 with screw-locking and degree of protection IP40 or IP65/67
BS EN 61076-2-107:2010 Connectors for electronic equipment. Product requirements Detail specification for circular hybrid connectors M12 with electrical and fibre-optic contacts with screw locking
I.S. EN 61988-2-1:2012 PLASMA DISPLAY PANELS - PART 2-1: MEASURING METHODS - OPTICAL AND OPTOELECTRICAL (IEC 61988-2-1:2012 (EQV))
08/30175867 DC : DRAFT JAN 2008 BS EN 61111 - LIVE WORKING - ELECTRICAL INSULATING MATTING
BS EN 61000-4-12:2017 Electromagnetic Compatibility (EMC) Testing and measurement techniques. Ring wave immunity test
ISO 7240-6:2011 Fire detection and alarm systems — Part 6: Carbon monoxide fire detectors using electro-chemical cells
BS EN 60512-25-9:2008 Connectors for electronic equipment. Tests and measurements Signal integrity tests. Test 25i. Alien crosstalk
03/106844 DC : DRAFT MAY 2003 ISO 7240-11 - FIRE DETECTION AND ALARM SYSTEMS - PART 11: MANUAL CALL POINTS
BS EN 61076-4-111:2002 Connectors for electronic equipment. Printed board connectors with assessed quality Detail specification for two-part power connector modules, for printed boards and backplanes having early mating features, and having a basic grid of 2,5 mm in accordance with IEC 60917-1
08/30195238 DC : 0
UNE-EN 62271-204:2012 High-voltage switchgear and controlgear - Part 204: Rigid gas-insulated transmission lines for rated voltage above 52 kV
BS EN 60939-3:2015 Passive filter units for electromagnetic interference suppression Passive filter units for which safety tests are appropriate
09/30214333 DC : 0 BS EN 60384-22 - FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 22: SECTIONAL SPECIFICATION: FIXED SURFACE MOUNT MULTILAYER CAPACITORS OF CERAMIC DIELECTRIC, CLASS 2
BS IEC 61196-9:2014 Coaxial communication cables Sectional specification for RF flexible cables
BS EN 61076-4-102:1997 Connectors with assessed quality, for use in d.c., low-frequency analogue and in digital high speed data applications. Printed board connectors Detail specification for two-part single-pole connectors, for multiple uses on plug-in units, with pre-centring, coding and early mating features, having a metric grid in accordance with IEC 60917
07/30172354 DC : 0 BS EN 61988-2-4 - PLASMA DISPLAY PANELS - PART 2-4: MEASURING METHODS - VISUAL QUALITY
I.S. EN 61076-4-111:2002 CONNECTORS FOR ELECTRONIC EQUIPMENT - PRINTED BOARD CONNECTORS WITH ASSESSED QUALIFY - DETAIL SPECIFICATION FOR TWO-PART POWER CONNECTOR MODULES, FOR PRINTED BOARDS AND BACKPLANES HAVING EARLY MATING FEATURES, AND HAVING A BASIC GRID OF 2,5 MM IN ACCORDANCE WITH IEC 60917-1
RE.AERO 60112 : 1990 ERRATA 1992 QUALITY STEPS RELATING TO CLIMATIC ENVIRONMENT TESTS
99/703461 DC : DRAFT AUG 1999 BS EN 50131-2-2 - ALARM SYSTEMS - INTRUSION SYSTEMS - PART 2-2: REQUIREMENTS FOR PASSIVE INFRARED DETECTORS
05/30133278 DC : DRAFT MAY 2005 IEC 62137-1-1 - SURFACE MOUNT TECHNOLOGY - ENVIRONMENTAL AND ENDURANCE TEST METHODS FOR SURFACE MOUNT SOLDER JOINT - PART 1-1: PULL STRENGTH TEST
06/30157868 DC : 0 BS EN 60393-1 - POTENTIOMETERS FOR USE IN ELECTRONIC EQUIPMENT - PART 1: GENERIC SPECIFICATION
I.S. EN 60352-5:2012-2015-10 SOLDERLESS CONNECTIONS - PART 5: PRESS-IN CONNECTIONS - GENERAL REQUIREMENTS, TEST METHODS AND PRACTICAL GUIDANCE (IEC 60352-5:2012 (EQV))
CEI EN 60068-2-70 : 1997 ENVIRONMENTAL TESTING - PART 2: TESTS TEST XB: ABRASION OF MARKINGS AND LETTERINGS CAUSED BY RUBBING OF FINGERS AND HANDS
CEI EN 61076-4-100 : 2003 CONNECTORS FOR ELECTRONIC EQUIPMENT - PART 4-100: PRINTED BOARD CONNECTORS WITH ASSESSED QUALITY - DETAIL SPECIFICATION FOR TWO-PART CONNECTOR MODULES HAVING A GRID OF 2,5 MM FOR PRINTED BOARDS AND BACKPLANES
BS EN 61988-3-2:2009 Plasma display panels Interface. Electrical interface
I.S. EN 62137-1-1:2007 SURFACE MOUNTING TECHNOLOGY - ENVIRONMENTAL AND ENDURANCE TEST METHODS FOR SURFACE MOUNT SOLDER JOINT - PART 1-1: PULL STRENGTH TEST
13/30267625 DC : 0 BS EN 61481-2 ED 1.0 - LIVE WORKING - PHASE COMPARATORS - PART 2: RESISTIVE TYPE TO BE USED FOR VOLTAGES FROM 1 KV TO 36 KV A.C
CSA CEI/IEC 61000.4.12 : 2001 ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4: TESTING AND MEASUREMENT TECHNIQUES - SECTION 12: OSCILLATORY WAVES IMMUNITY TEST BASIC EMC PUBLICATION
15/30329729 DC : 0 BS EN 61076-3-122 - CONNECTORS FOR ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 3-122: DETAIL SPECIFICATION FOR 8-WAY, SHIELDED, FREE AND FIXED CONNECTORS FOR I/O AND GIGABIT APPLICATIONS IN HARSH ENVIRONMENTS
ES 202 319 : 1.1.1 TRANSMISSION AND MULTIPLEXING (TM); PASSIVE OPTICAL COMPONENTS AND CABLES; OPTICAL FIBRE CABLES TO BE USED FOR PATCHCORD APPLICATIONS FOR SINGLE-MODE OPTICAL FIBRE COMMUNICATION SYSTEMS; COMMON REQUIREMENTS AND CONFORMANCE TESTING
08/30195242 DC : 0 BS EN 62599-2 IEC 62599 - ALARM SYSTEMS - GENERAL REQUIREMENTS - PART 2 - ELECTRO-MAGNETIC COMPATIBILITY
DIN EN 54-29:2015-06 Fire detection and fire alarm systems - Part 29: Multi-sensor fire detectors - Point detectors using a combination of smoke and heat sensors
08/30176740 DC : DRAFT JAN 2008 BS EN 61210 - CONNECTING DEVICES - FLAT QUICK-CONNECT TERMINATIONS FOR ELECTRICAL COPPER CONDUCTORS - SAFETY REQUIREMENTS
12/30252220 DC : DRAFT MAR 2012 BS EN 62604-1 - SURFACE ACOUSTIC WAVE (SAW) AND BULK ACOUSTIC WAVE (BAW) DUPLEXERS - PART 1: GENERIC SPECIFICATION
17/30362102 DC : DRAFT AUG 2017 BS ISO 21927-4 - SMOKE AND HEAT CONTROL SYSTEMS - PART 4: NATURAL SMOKE AND HEAT EXHAUST VENTILATORS; DESIGN, REQUIREMENTS AND INSTALLATION
BS EN 61753-052-6:2016 Fibre optic interconnecting devices and passive components. Performance standard Single-mode fibre non-connectorized fixed attenuator. Category O in outside plant environment
BS IEC 63004:2015 Standard for receiver fixture interface
03/101947 DC : DRAFT FEB 2003 IEC 60939-1 ED.2.0 - PASSIVE FILTER UNITS FOR ELECTROMAGNETIC INTERFERENCE SUPPRESSION - PART 1: GENERIC SPECIFICATION
18/30372805 DC : DRAFT APR 2018 BS EN 60512-11-1 - ELECTROMECHANICAL COMPONENTS FOR ELECTRONIC EQUIPMENT - BASIC TESTING PROCEDURES AND MEASURING METHODS - PART 11: CLIMATIC TESTS - SECTION 1: TEST 11A - CLIMATIC SEQUENCE
BS EN 60849:1998 Sound systems for emergency purposes
BS EN 61076-2-001:2011 Connectors for electronic equipment. Product requirements Circular connectors. Blank detail specification
05/30117311 DC : 0 EN 54-25 - FIRE DETECTION AND FIRE ALARM SYSTEMS - PART 25: COMPONENTS USING RADIO LINKS AND SYSTEM REQUIREMENTS
BS EN 62326-20:2016 Printed boards Printed circuit boards for high-brightness LEDs
BS EN 60384-21:2012 Fixed capacitors for use in electronic equipment Sectional specification. Fixed surface mount multilayer capacitors of ceramic dielectric, Class 1
PD IEC TR 60721-4-7:2001 Classification of environmental conditions. Guidance for the correlation and transformation of environmental condition classes of IEC 60721-3 to the environmental tests of IEC 60068 Portable and non-stationary use
BS EN 61169-48:2015 Radio-frequency connectors Sectional specification for series BMP R.F. coaxial connectors
03/114763 DC : DRAFT SEP 2003 EN 54-18 - FIRE DETECTION AND FIRE ALARM SYSTEMS - PART 18: REQUIREMENTS AND TEST METHODS FOR INPUT/OUTPUT DEVICES FOR USE ON THE TRANSMISSION PATHS OF FIRE DETECTION AND FIRE ALARM SYSTEMS
13/30255976 DC : 0 BS ISO 7076-5 - FIRE PROTECTION - FOAM FIRE EXTINGUISHING SYSTEMS - PART 5: COMPRESSED AIR FOAM EQUIPMENT
BS EN 62341-5:2009 Organic light emitting diode (OLED) displays Environmental testing methods
I.S. EN 50132-5-3:2012 ALARM SYSTEMS - CCTV SURVEILLANCE SYSTEMS FOR USE IN SECURITY APPLICATIONS - PART 5-3: VIDEO TRANSMISSION - ANALOGUE AND DIGITAL VIDEO TRANSMISSION
BS EN 61811-11:2003 Electromechanical all-or-nothing relays Blank detail specification. Relays for industrial application
09/30206176 DC : DRAFT JUNE 2009 BS EN 62137-3 ED.1 - ELECTRONICS ASSEMBLY TECHNOLOGY - PART 3: SELECTION GUIDANCE OF ENVIRONMENTAL AND ENDURANCE TEST METHODS FOR SOLDER JOINTS
OIML R 115 : 1995 CLINICAL ELECTRICAL THERMOMETERS WITH MAXIMUM DEVICE
EN 62262:2002 Degrees of protection provided by enclosures for electrical equipment against external mechanical impacts (IK code)
BS EN 61189-5-3:2015 Test methods for electrical materials, printed boards and other interconnection structures and assemblies General test methods for materials and assemblies. Soldering paste for printed board assemblies
BS EN 61076-3-106:2006 Connectors for electronic equipment. Product requirements Rectangular connectors. Detail specification for protective housings for use with 8-way shielded and unshielded connectors for industrial environments incorporating the IEC 60603-7 series interface
BS EN 61753-111-7:2010 Fibre optic interconnecting devices and passive components performance standard Sealed closures for category A. Aerial
BS EN 60143-4:2010 Series capacitors for power systems Thyristors controlled series capacitors
06/30154593 DC : DRAFT AUG 2006 EN 61988-2-3 - PLASMA DISPLAY PANELS - PART 2-3: MEASURING METHODS - QUALITY
BS EN 50483-1:2009 Test requirements for low voltage aerial bundled cable accessories Generalities
CEI EN 60728-13-1 : 2013 CABLE NETWORKS FOR TELEVISION SIGNALS, SOUND SIGNALS AND INTERACTIVE SERVICES - PART 13-1: BANDWIDTH EXPANSION FOR BROADCAST SIGNAL OVER FTTH SYSTEM
17/30361901 DC : 0 BS EN 61076-3-125 - CONNECTORS FOR ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - DETAIL SPECIFICATION FOR 2-WAY, SHIELDED AND UNSHIELDED, FREE AND FIXED CONNECTORS FOR DATA TRANSMISSION UP TO 600 MHZ WITH CURRENT CARRYING CAPACITY
BS ISO 21927-10:2011 Smoke and heat control systems Specification for power output devices
06/30156696 DC : DRAFT OCT 2006
05/30127975 DC : DRAFT JAN 2005 ISO 7240-12 - FIRE DETECTION AND ALARM SYSTEMS - PART 12: LINE TYPE SMOKE DETECTORS USING A TRANSMITTING LIGHT BEAM
CEI EN 62137-1-5 : 2010 SURFACE MOUNTING TECHNOLOGY - ENVIRONMENTAL AND ENDURANCE TEST METHODS FOR SURFACE MOUNT SOLDER JOINT - PART 1-5: MECHANICAL SHEAR FATIGUE TEST
CEI EN 61076-4-110 : 2003 CONNECTORS FOR ELECTRONIC EQUIPMENT - PART 4-110: PRINTED BOARD CONNECTORS WITH ASSESSED QUALITY - DETAIL SPECIFICATION FOR LATCHED CABLE CONNECTOR SYSTEM HAVING A BASIC GRID OF 2,0 MM INCLUDING FULL SHIELDING AND LATCHING FUNCTION
CSA CEI/IEC 61000.4.9 : 2002 ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-9: TESTING AND MEASUREMENT TECHNIQUES - PULSE MAGNETIC FIELD IMMUNITY TEST
BS EN 62718:2016 Railway applications. Rolling stock. DC supplied electronic ballasts for lighting fluorescent lamps
BS EN 61753-101-3:2009 Fibre optic interconnecting devices and passive components performance standard Fibre management systems for category U. Uncontrolled environment
BS EN 61000-4-28 : 2000 ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-28: TESTING AND MEASUREMENT TECHNIQUES - VARIATION OF POWER FREQUENCY, IMMUNITY TEST FOR EQUIPMENT WITH INPUT CURRENT NOT EXCEEDING 16 A PER PHASE
NF EN 54-23 : 2010 FIRE DETECTION AND FIRE ALARM SYSTEMS - PART 23: FIRE ALARM DEVICES - VISUAL ALARM DEVICES
04/30104415 DC : DRAFT AUG 2004 EN 54-20 - FIRE DETECTION AND FIRE ALARM SYSTEMS - PART 20: ASPIRATING SMOKE DETECTORS
02/708067 DC : DRAFT SEP 2002 BS EN 50131-2-4 - ALARM SYSTEMS - INTRUSION SYSTEMS - PART 2-4: REQUIREMENTS FOR COMBINED PASSIVE INFRARED AND MICROWAVE DETECTORS
DIN EN 54-26:2015-11 FIRE DETECTION AND FIRE ALARM SYSTEMS - PART 26: CARBON MONOXIDE DETECTORS - POINT DETECTORS
05/30138528 DC : DRAFT SEP 2005 IEC 60512-26-1 - CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 26-1: GENERAL REQUIREMENTS FOR MEASUREMENT SETUP ASSOCIATED WITH TESTS 26A TO 26F
DIN EN 15859 E : 2010 AIR QUALITY - CERTIFICATION OF AUTOMATED DUST ARRESTMENT PLANT MONITORS FOR USE ON STATIONARY SOURCES - PERFORMANCE CRITERIA AND TEST PROCEDURES
BS CECC 23300-800(1990) : AMD 7366 HARMONIZED SYSTEM OF QUALITY ASSESSMENT FOR ELECTRONIC COMPONENTS: CAPABILITY DETAIL SPECIFICATION; MULTILAYER PRINTED BOARDS
BS EN 45510-2-7:2002 Guide for the procurement of power station equipment. Electrical equipment Switchgear and controlgear
95/541995 DC : DRAFT AUG 1995 PREN ISO 12239 - SPECIFICATION FOR FIRE PROTECTION EQUIPMENT - SELF-CONTAINED SMOKE ALARMS
02/209131 DC : DRAFT JAN 2003 IEC 61811-11 ED.1 - ELECTROMECHANICAL ELEMENTARY RELAYS OF ASSESSED QUALITY - PART 11: BLANK DETAIL SPECIFICATION - RELAYS FOR INDUSTRIAL APPLICATION
12/30254697 DC : 0 BS ISO 16525-9 - ADHESIVES - TEST METHODS FOR ISOTROPICALLY ELECTRICALLY CONDUCTING ADHESIVES - PART 9: DETERMINATION OF HIGH-SPEED SIGNAL-TRANSMISSION CHARACTERISTICS
BS EN 61810-5:1999 Electromechanical non-specified time all-or-nothing relays Insulation coordination
I.S. EN 60384-25:2015 FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 25: SECTIONAL SPECIFICATION - SURFACE MOUNT FIXED ALUMINIUM ELECTROLYTIC CAPACITORS WITH CONDUCTIVE POLYMER SOLID ELECTROLYTE
01/200972 DC : DRAFT FEB 2001 IEC 61243-1 ED.2 - LIVE WORKING - VOLTAGE DETECTORS - PART 1: CAPACITIVE TYPE TO BE USED FOR VOLTAGES EXCEEDING 1 KV A.C.
PD CLC/TS 50131-11:2012 Alarm systems. Intrusion and hold-up systems Hold-up devices
11/30245197 DC : 0 BS EN 60143-2 - SERIES CAPACITORS FOR POWER SYSTEMS - PART 2: PROTECTIVE EQUIPMENTS FOR SERIES CAPACITOR BANKS
BS EN 60512-26-100 : 2008 CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 26-100: MEASUREMENT SETUP, TEST AND REFERENCE ARRANGEMENTS AND MEASUREMENTS FOR CONNECTORS ACCORDING TO IEC 60603-7 - TESTS 26A TO 26G
I.S. EN 61481:2001 LIVE WORKING - PORTABLE PHASE COMPARATORS FOR VOLTAGES OF 1 KV TO 36 KV A.C.
14/30312548 DC : 0 BS EN 62908-12-10 - TOUCH AND INTERACTIVE DISPLAYS - PART 12-10: TOUCH PERFORMANCE MEASURING METHODS
07/30165180 DC : 0 BS EN 60068-2-83 - ENVIRONMENTAL TESTING - PART 2-83: TESTS - TEST TF - SOLDERABILITY TESTING OF ELECTRONIC COMPONENTS FOR SURFACE MOUNTING DEVICES (SMD) BY THE WETTING BALANCE METHOD USING LEAD-FREE SOLDER PASTE
16/30315066 DC : 0 BS EN 14604 - SMOKE ALARM DEVICES
CEI EN 50131-2-6 : 2009 ALARM SYSTEMS - INTRUSION AND HOLD-UP SYSTEMS - PART 2-6: OPENING CONTACTS (MAGNETIC)
CEI EN 60939-2 : 2005 PASSIVE FILTER UNITS FOR ELECTROMAGNETIC INTERFERENCE SUPPRESSION - PART 2: SECTIONAL SPECIFICATION: PASSIVE FILTER UNITS FOR WHICH SAFETY TESTS ARE APPROPRIATE - TEST METHODS AND GENERAL REQUIREMENTS
ISO 7240-11:2011 Fire detection and alarm systems Part 11: Manual call points
I.S. EN 54-26:2015 FIRE DETECTION AND FIRE ALARM SYSTEMS - PART 26: CARBON MONOXIDE DETECTORS - POINT DETECTORS
I.S. EN 61811-53:2002 ELECTROMECHANICAL ALL-OR-NOTHING RELAYS - PART 53: BLANK DETAIL SPECIFICATION - ELECTROMECHANICAL ALL-OR-NOTHING TELECOM RELAYS OF ASSESSED QUALITY - TWO CHANGE-OVER CONTACTS, 14 MM X 9 MM BASE
I.S. EN 61811-54:2002 ELECTROMECHANICAL ALL-OR-NOTHING RELAYS - PART 54: BLANK DETAIL SPECIFICATION - ELECTROMECHANICAL ALL-OR-NOTHING TELECOM RELAYS OF ASSESSED QUALITY - TWO CHANGE-OVER CONTACTS, 15 MM X 7,5 MM BASE
BS EN 60793-1-60:2017 Optical fibres Measurement methods and test procedures. Beat length
DD IEC/PAS 61076-2-109:2010 Connectors for electronic equipment. Product requirements Circular connectors. Detail specification for connectors M 12 × 1 with screw-locking, for data transmissions with frequencies up to 500 MHz
BS EN 60068-2-53:2010 Environmental testing Tests and guidance. Combined climatic (temperature/humidity) and dynamic (vibration/shock) tests
05/30129049 DC : DRAFT FEB 2005 IEC 62025-2 - HIGH FREQUENCY INDUCTIVE COMPONENTS - NON-ELECTRICAL CHARACTERISTICS AND MEASURING METHODS - PART 2: TEST METHODS FOR NON-ELECTRICAL CHARACTERISTICS
11/30243259 DC : 0 BS EN 60068-2-58 ED.4 - ENVIRONMENTAL TESTING - PART 2-58: TESTS TD- TEST METHODS FOR SOLDERABILITY, RESISTANCE TO DISSOLUTION OF METALIZATION AND TO SOLDERING HEAT OF SURFACE MOUNTING DEVICES (SMD)
BS EN 61000-4-21:2011 Electromagnetic compatibility (EMC) Testing and measurement techniques. Reverberation chamber test methods
BS EN 60352-6:1998 Solderless connections Solderless insulation piercing connections. General requirements, test methods and practical guidance
BS CECC23100-800(1990) : AMD 7360 HARMONIZED SYSTEM OF QUALITY ASSESSMENT FOR ELECTRONIC COMPONENTS: CAPABILITY DETAIL SPECIFICATION: SINGLE AND DOUBLE SIDED PRINTED BOARDS WITH PLAIN HOLES
07/30152595 DC : 0
03/103741 DC : DRAFT FEB 2003 IEC 61338-1 ED.1 - WAVEGUIDE TYPE DIELECTRIC RESONATORS OF ASSESSED QUALITY - PART 1: GENERIC SPECIFICATION
NF EN 50521 : 2009 AMD 1 2012 CONNECTORS FOR PHOTOVOLTAIC SYSTEMS - SAFETY REQUIREMENTS AND TESTS
BS ISO 21927-9:2012 Smoke and heat control systems Specification for control equipment
NF EN 61191-6 : 2010 PRINTED BOARD ASSEMBLIES - PART 6: EVALUATION CRITERIA FOR VOIDS IN SOLDERED JOINTS OF BGA AND LGA AND MEASUREMENT METHOD
BS EN 60384-16:2005 Fixed capacitors for use in electronic equipment Sectional specification: Fixed metallized polypropylene film dielectric d.c. capacitors
ISO 7240-5:2012 Fire detection and alarm systems Part 5: Point-type heat detectors
13/30269681 DC : 0 BS EN 62823 - THYRISTOR VALVES FOR THYRISTOR CONTROLLED SERIES CAPACITORS (TCSC) - ELECTRICAL TESTING
NF EN 60068 3-1 : 2012 ENVIRONMENTAL TESTING - PART 3-1: SUPPORTING DOCUMENTATION AND GUIDANCE - COLD AND DRY HEAT TESTS
04/30111632 DC : DRAFT MARCH 2004
11/30234908 DC : 0 BS EN 62629-6-2 - 3D DISPLAY DEVICES - PART 6-2: OPTICAL MEASURING METHODS FOR STEREOSCOPIC DISPLAYS USING GLASSES
PD IEC/TR 62349:2014 Guidance of measurement methods and test procedures. Basic tests for polarization-maintaining optical fibres
08/30175871 DC : DRAFT JAN 2008 BS EN 61112 - LIVE WORKING - ELECTRICAL INSULATING BLANKETS
ISO 21927-10:2011 Smoke and heat control systems — Part 10: Specification for power output devices
BS EN 50132-5:2001 Alarm systems. CCTV surveillance systems for use in security applications Video transmission
BS EN 62878-1-1:2015 Device embedded substrate Generic specification. Test methods
EN 61753-111-8:2010 Fibre optic interconnecting devices and passive components - Performance standard - Part 111-8: Sealed closures for category G - Ground
I.S. EN 50130-5:2011 ALARM SYSTEMS - PART 5: ENVIRONMENTAL TEST METHODS
07/30161526 DC : 0 BS EN 60115-8 - FIXED RESISTORS FOR USE IN ELECTRONIC EQUIPMENT - PART 8: SECTIONAL SPECIFICATION - FIXED SURFACE MOUNT RESISTORS
BS EN ISO 8230-1:2008 Safety requirements for dry-cleaning machines Common safety requirements
BS CECC14000(1984) : 1984 AMD 7575 HARMONIZED SYSTEM OF QUALITY ASSESSMENT FOR ELECTRONIC COMPONENTS: GENERIC SPECIFICATION: PHOTOMULTIPLIER TUBES
BS EN 61076-4-103:1999 Connectors with assessed quality, for use in d.c., low-frequency analogue and in digital high speed data applications. Printed board connectors Detail specification for two-part connectors with shielding and a basic grid of 2,5 mm - Cable to board connectors, shielded against EMC ,grid 2,5 mm,for high speed data rates,for use with printed boards
IEC 62642-2-71:2015 Alarm systems - Intrusion and hold-up systems - Part 2-71: Intrusion detectors - Glass break detectors (acoustic)
NF EN 60393-1 : 2017 POTENTIOMETERS FOR USE IN ELECTRONIC EQUIPMENT - PART 1: GENERIC SPECIFICATION
BS EN 61000-4-19:2014 Electromagnetic compatibility (EMC) Testing and measurement techniques. Test for immunity to conducted, differential mode disturbances and signalling in the frequency range 2 kHz to 150 kHz at a.c. power ports
16/30338295 DC : 0 BS EN 60793-1-61 - OPTICAL FIBRES - PART 1-61: MEASUREMENT METHODS AND TEST PROCEDURES - POLARIZATION CROSSTALK
13/30278343 DC : 0 BS EN 62246-1 - REED SWITCHES - PART 1: GENERIC SPECIFICATION
BS EN 61146-3:1997 Video cameras (PAL/SECAM/NTSC). Method of measurement Non-broadcast camera-recorders
BS EN 60728-13-1:2017 Cable networks for television signals, sound signals and interactive services Bandwidth expansion for broadcast signal over FTTH system
11/30234589 DC : 0 BS EN 62341-5-3 ED.1 - ORGANIC LIGHT EMITTING DIODE (OLED) DISPLAYS - PART 5-3: MEASURING METHODS OF IMAGE STICKING AND LIFETIME
BS EN 60115-8-1:2015 Fixed resistors for use in electronic equipment Blank detail specification: Fixed surface mount (SMD) low power film resistors for general electronic equipment, classification level G
I.S. EN 61000-4-13:2002 ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-13: TESTING AND MEASUREMENT TECHNIQUES - HARMONICS AND INTERHARMONICS INCLUDING MAINS SIGNALLING AT A.C. POWER PORT, LOW FREQUENCY IMMUNITY TESTS
S.R. CLC/TS 50131-2-7-1:2009 ALARM SYSTEMS - INTRUSION AND HOLD-UP SYSTEMS - PART 2-7-1: INTRUSION DETECTORS - GLASS BREAK DETECTORS (ACOUSTIC)
BS EN 61305-1:1995 Household high-fidelity audio equipment and systems. Methods of measuring and specifying the performance General
BS EN 61076-7-100:2006 Connectors for electronic equipment. Product requirements Cable outlet accessories. Detail specification for a metric cable sealing consisting of an integrated part of heavy-duty rectangular or circular connector hoods and a sealing system
BS CECC23300(1989) : 1989 AMD 7364 SPECIFICATION FOR HARMONIZED SYSTEM OF QUALITY ASSESSMENT FOR ELECTRONIC COMPONENTS: SECTIONAL SPECIFICATION: MULTILAYER PRINTED BOARDS
BS CECC 41200:1979 Harmonized system of quality assurance for electronic components: sectional specification: power potentiometers
DIN 41652-2:1990-06 RACK AND PANEL CONNECTORS, TRAPEZOIDAL, ROUND CONTACTS DIAMETER 1 MM; RATINGS, REQUIREMENTS, TESTS
BS EN 61021-2:1997 Laminated core packages for transformers and inductors for use in telecommunication and electronic equipment Electrical characteristics for cores using YEE 2 laminations
EN 60068-2-2:2007 Environmental testing - Part 2-2: Tests - Test B: Dry heat
BS EN 62884-1:2017 Measurement techniques of piezoelectric, dielectric and electrostatic oscillators Basic methods for the measurement
CSA E60384.1 : 2014 FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 1: GENERIC SPECIFICATION
DIN EN 54-24 E : 2008 FIRE DETECTION AND FIRE ALARM SYSTEMS - PART 24: COMPONENTS OF VOICE ALARM SYSTEMS - LOUDSPEAKERS
BS EN 60068-2-83:2011 Environmental testing Tests. Test Tf: Solderability testing of electronic components for surface mounting devices (SMD) by the wetting balance method using solder paste
18/30367515 DC : DRAFT APR 2018 BS EN 60068-3-3 - ENVIRONMENTAL TESTING - PART 3-3: GUIDANCE - SEISMIC TEST METHODS FOR EQUIPMENTS
18/30366168 DC : DRAFT APR 2018 BS EN 62899-202-6 - PRINTED ELECTRONICS - PART 202-6: MATERIALS - CONDUCTIVE FILM - ENVIRONMENTAL TEST OF A PRINTED METAL BASED CONDUCTIVE LAYER ON FLEXIBLE SUBSTRATE
NF EN 61643-331 : 2003 COMPOSANTS POUR PARAFOUDRES BASSE TENSION - PARTIE 331: SPECIFICATIONS POUR LES VARISTANCES A OXYDE METALLIQUE (MOV)
NF EN 54-26 : 2015 FIRE DETECTION AND FIRE ALARM SYSTEMS - PART 26: CARBON MONOXIDE DETECTORS - POINT DETECTORS
BS EN 60664-1:2007 Insulation coordination for equipment within low-voltage systems Principles, requirements and tests
BS EN 61076-4-104:1999 Connectors for electronic equipment. Printed board connectors with assessed quality Detail specification for two-part modular connectors, basic grid of 2,0 mm, with terminations on a multiple grid of 0,5 mm - Detail specification for two part modular connectors (with optional shielding plates) for printed boards and backplanes, basic grid 2,0 mm, with terminations on a multiple grid of 0,5 mm
NF EN 50131-2-6 : 2008 ALARM SYSTEMS - INTRUSION AND HOLD-UP SYSTEMS - PART 2-6: OPENING CONTACTS (MAGNETIC)
BS EN 62586-1:2017 Power quality measurement in power supply systems Power quality instruments (PQI)
NF EN 62137-1-5 : 2009 SURFACE MOUNTING TECHNOLOGY - ENVIRONMENTAL AND ENDURANCE TEST METHODS FOR SURFACE MOUNT SOLDER JOINT - PART 1-5: MECHANICAL SHEAR FATIGUE TEST
NF EN 62576 : 2011 ELECTRIC DOUBLE-LAYER CAPACITORS FOR USE IN HYBRID ELECTRIC VEHICLES - TEST METHODS FOR ELECTRICAL CHARACTERISTICS
BS IEC 61988-4-2:2012 Plasma display panels Environmental testing methods. Panel strength
BS EN 60747-5-5 : 2011 SEMICONDUCTOR DEVICES - DISCRETE DEVICES - PART 5-5: OPTOELECTRONIC DEVICES - PHOTOCOUPLERS
BS EN 60384-19:2015 Fixed capacitors for use in electronic equipment Sectional specification: Fixed metallized polyethylene-terephthalate film dielectric surface mount d.c. capacitors
NF EN 61020-1 : 2009 ELECTROMECHANICAL SWITCHES FOR USE IN ELECTRICAL AND ELECTRONIC EQUIPMENT - PART 1: GENERIC SPECIFICATION
BS IEC 61988-2-6:2015 Plasma display panels Measuring methods. APL dependent gamma and colour characteristics
02/210375 DC : DRAFT DEC 2002 IEC 60068-2-80 ED.1 - ENVIRONMENTAL TESTING - PART 2: TEST METHODS - TEST F(?) - MIXED MODE TESTING
NF EN 61076 4 115 : 2003 CONNECTORS FOR ELECTRONIC EQUIPMENT - PART 4-115: PRINTED BOARD CONNECTORS - BACKPLANE CONNECTOR FOR INFINIBAND EQUIPMENT
BS EN 60068-3-4:2002 Environmental testing Supporting documentation and guidance - Damp heat tests
BS 3549-1:1979 Methods of measuring and expressing the performance of television receivers General considerations and electrical measurements other than those at audio-frequencies
UNE-EN 60068-2-78:2013 Environmental testing - Part 2-78: Tests - Test Cab: Damp heat, steady state
14/30296909 DC : 0 BS EN 61643-331 - COMPONENTS FOR LOW-VOLTAGE SURGE PROTECTIVE DEVICES - PART 331: PERFORMANCE REQUIREMENTS AND TEST METHODS FOR METAL OXIDE VARISTORS (MOV)
BS EN 50131-3:2009 Alarm systems. Intrusion and hold-up systems Control and indicating equipment
BS EN 60068-2-65:2013 Environmental testing Tests. Test Fg: Vibration. Acoustically induced method
BS ISO 19453-4:2018 Road vehicles. Environmental conditions and testing for electrical and electronic equipment for drive system of electric propulsion vehicles Climatic loads
BS EN 62137-1-5:2009 Surface mounting technology. Environmental and endurance test methods for surface mount solder joints Mechanical shear fatigue test
06/30152213 DC : DRAFT JUNE 2006 BS EN 60603-7-1 ED. 2 - CONNECTORS FOR ELECTRONIC EQUIPMENT - PART 7-1: DETAIL SPECIFICATION FOR 8-WAY, SHIELDED, FREE AND FIXED CONNECTORS
IEC PAS 61076-2-109:2010 Connectors for electronic equipment - Product requirements - Part 2-109: Circular connectors - Detail specification for connectors M12 x 1 with screw-locking, for data transmissions with frequencies up to 500 MHz
BS EN 60068-2-27:2009 Environmental testing Tests. Test Ea and guidance. Shock
IEC 61051-1:2007 Varistors for use in electronic equipment - Part 1: Generic specification
CEI EN 50467 : 2013 RAILWAY APPLICATIONS - ROLLING STOCK - ELECTRICAL CONNECTORS, REQUIREMENTS AND TEST METHODS
I.S. EN 61169-52:2015 RADIO-FREQUENCY CONNECTORS - PART 52: SECTIONAL SPECIFICATION FOR SERIES MMCX RF COAXIAL CONNECTORS
07/30134620 DC : 0 BS EN 50131-6 - ALARM SYSTEMS - INTRUSION AND HOLD-UP SYSTEMS - PART 6: POWER SUPPLIES
07/30164554 DC : 0 BS EN 62341-5 - ORGANIC LIGHT EMITTING DIODE DISPLAYS - PART 5: ENVIRONMENTAL TEST METHODS
12/30274800 DC : 0 BS IEC 61189-5-3 ED.1 - TEST METHODS FOR ELECTRICAL MATERIALS, INTERCONNECTION STRUCTURES AND ASSEMBLIES - PART 5-3: TEST METHODS FOR PRINTED BOARD ASSEMBLIES: SOLDERING PASTE
BS EN 50508:2009 Multi-purpose insulating sticks for electrical operations on high voltage installations
BS EN 62674-1:2012 High frequency inductive components Fixed surface mount inductors for use in electronic and telecommunication equipment
PD IEC/TR 60721-4-1:2002 Classification of environmental conditions. Guidance for the correlation and transformation of environmental condition classes of IEC 60721-3 to the environmental tests of IEC 60068 Storage
BS EN 62193:2003 Live working. Telescopic sticks and telescopic measuring sticks
CEI EN 61076-2-106 : 2012 CONNECTORS FOR ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 2-106: CIRCULAR CONNECTORS - DETAIL SPECIFICATION FOR CONNECTORS M 16 X 0,75 WITH SCREW-LOCKING AND DEGREE OF PROTECTION IP40 OR IP65/67
CEI EN 60664-1 : 2008 INSULATION COORDINATION FOR EQUIPMENT WITHIN LOW-VOLTAGE SYSTEMS - PART 1: PRINCIPLES, REQUIREMENTS AND TESTS
BS 6083-7(1985) : 1985 AMD 7837 HEARING AIDS - METHODS FOR MEASUREMENT OF THE PERFORMANCE CHARACTERISTICS OF HEARING AIDS FOR QUALITY INSPECTION ON DELIVERY
04/30112325 DC : DRAFT APR 2004 IEC 61076-3-104 ED.2 - CONNECTORS FOR ELECTRONIC EQUIPMENT - PART 3-104: RECTANGULAR CONNECTORS - DETAIL SPECIFICATION FOR 8-WAY, SHIELDED FREE AND FIXED CONNECTORS FOR DATA TRANSMISSION WITH FREQUENCIES UP TO 1000 MHZ
16/30340202 DC : 0 BS EN 61000-4-12 ED3.0 - ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-12: TESTING AND MEASUREMENT TECHNIQUES - RING WAVE IMMUNITY TEST
09/30205410 DC : 0 BS EN 62271-204 - HIGH-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 204: RIGID HIGH-VOLTAGE, GAS-INSULATED TRANSMISSION LINES FOR RATED VOLTAGES OF 72,5 KV AND ABOVE
10/30216372 DC : 0 BS EN 61076-2-101 - CONNECTORS FOR ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 2-101: CIRCULAR CONNECTORS - DETAIL SPECIFICATION FOR M12 CONNECTORS WITH SCREW-LOCKING
BS EN 61988-4:2007 Plasma display panels Climatic and mechanical testing methods
CSA IEC 61646 : 2010 : R2014 THIN-FILM TERRESTRIAL PHOTOVOLTAIC (PV) MODULES - DESIGN QUALIFICATION AND TYPE APPROVAL
BS EN 50130-4 : 2011 ALARM SYSTEMS - PART 4: ELECTROMAGNETIC COMPATIBILITY - PRODUCT FAMILY STANDARD: IMMUNITY REQUIREMENTS FOR COMPONENTS OF FIRE, INTRUDER, HOLD UP, CCTV, ACCESS CONTROL AND SOCIAL ALARM SYSTEMS
EN 61076-2-113:2017 Connectors for electronic equipment - Product requirements - Part 2-113: Circular connectors - Detail specification for connectors with M12 screw locking with power and signal contacts for data transmission with frequency up to 100 MHz
04/30111264 DC : DRAFT MARCH 2004
PREN 50467 : DRAFT 2009 RAILWAY APPLICATIONS - ROLLING STOCK - ELECTRICAL CONNECTORS, REQUIREMENTS AND TEST METHODS
CEI EN 60068-2-65 : 2013 ENVIRONMENTAL TESTING - PART 2-65: TESTS - TEST FG: VIBRATION - ACOUSTICALLY INDUCED METHOD
BS EN 60384-15:2017 Fixed capacitors for use in electronic equipment Sectional specification: Fixed tantalum capacitors with non-solid or solid electrolyte
09/30207307 DC : 0 BS EN 60115-2 - FIXED RESISTORS FOR USE IN ELECTRONIC EQUIPMENT - PART 2: SECTIONAL SPECIFICATION: FIXED LOW-POWER NON-WIREWOUND RESISTORS
BS EN 62024-2:2009 High frequency inductive components. Electrical characteristics and measuring methods Rated current of inductors for DC to DC converters
07/30171325 DC : 0 BS EN 62341-6-1 - ORGANIC LIGHT EMITTING DIODE DISPLAYS - PART 6-1: MEASURING METHODS OF OPTICAL AND OPTOELECTRICAL PARAMETERS
BS EN 60068-2-81:2003 Environmental testing. Test methods Test Ei. Shock. Shock response spectrum synthesis
EN 60384-2:2012 Fixed capacitors for use in electronic equipment - Part 2: Sectional specification - Fixed metallized polyethylene terephthalate film dielectric d.c. capacitors
BS EN 181000:1995 Harmonized system of quality assessment for electronic components. Generic specification. Fibre optic branching devices
CEI EN 50483-1 : 2011 TEST REQUIREMENTS FOR LOW VOLTAGE AERIAL BUNDLED CABLE ACCESSORIES - PART 1: GENERALITIES
CEI EN 61076-3-120 : 1ED 2017 CONNECTORS FOR ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 3-120: RECTANGULAR CONNECTORS - DETAIL SPECIFICATION FOR REWIRABLE POWER CONNECTORS WITH SNAP LOCKING FOR RATED VOLTAGE OF 250 V D.C. AND RATED CURRENT OF 30 A
BS EN 61210:2010 Connecting devices. Flat quick-connect terminations for electrical copper conductors. Safety requirements
I.S. EN 61076-4-115:2003 CONNECTORS FOR ELECTRONIC EQUIPMENT - PART 4-115: PRINTED BOARD CONNECTORS - BACKPLANE CONNECTOR FOR INFINIBAND EQUIPMENT
I.S. EN 61337-1:2005 FILTERS USING WAVEGUIDE TYPE DIELECTRIC RESONATORS - PART 1: GENERIC SPECIFICATION
IEC TR 62392:2006 Suitability of typical electrical insulating material (EIM) for polymer recycling
CSA E60127.6 : 2003 MINIATURE FUSES - PART 6: FUSE-HOLDERS FOR MINIATURE CARTRIDGE FUSE-LINKS
CEI EN 61508-7 : 2011 FUNCTIONAL SAFETY OF ELECTRICAL/ELECTRONIC/PROGRAMMABLE ELECTRONIC SAFETYRELATED SYSTEMS - PART 7: OVERVIEW OF TECHNIQUES AND MEASURES
CEI EN 61076-4-115 : 2004 CONNECTORS FOR ELECTRONIC EQUIPMENT PART 4-115: PRINTED BOARD CONNECTORS BACKPLANE CONNECTOR FOR INFINIBAND EQUIPMENT
02/206827 DC : DRAFT JULY 2002 IEC 61000-4-4 ED.2 - ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-4: TESTING AND MEASUREMENT TECHNIQUES - ELECTRICAL FAST TRANSIENT/BURST IMMUNITY TEST - BASIC EMC PUBLICATION
CSA E61965 : 2004 : R2013 MECHANICAL SAFETY OF CATHODE RAY TUBES
I.S. EN 61076-3-115:2010 CONNECTORS FOR ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 3-115: RECTANGULAR CONNECTORS - DETAIL SPECIFICATION FOR PROTECTIVE HOUSINGS FOR USE WITH 8-WAY SHIELDED AND UNSHIELDED CONNECTORS FOR FREQUENCIES UP TO 600 MHZ FOR INDUSTRIAL ENVIRONMENTS INCORPORATING THE IEC 60603-7 SERIES INTERFACE - VARIANT 12 RELATED TO IEC 61076-3-106 - PUSH-PULL TYPE
I.S. EN 60384-21:2012 FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 21: SECTIONAL SPECIFICATION - FIXED SURFACE MOUNT MULTILAYER CAPACITORS OF CERAMIC DIELECTRIC, CLASS 1 (IEC 60384-21:2011 (EQV))
CAN/CSA-E60127-6-03 (R2017) Miniature Fuses - Part 6: Fuse-Holders for Miniature Cartridge Fuse-Links (Adopted CEI/IEC 127-6:1994, first edition, 1994-04, including Amendment 1:1996, with Canadian deviations) | Coupe-circuit miniatures - Partie 6: Ensembles-porteurs pour cartouches de coupe-circuit miniatures (norme CEI/IEC 127-6:1994 adoptée, première édition, 1994-04, y compris l\'Amendement 1:1996, avec exigences propres au Canada)
BS EN 61076-3-116:2008 Connectors for electronic equipment. Product requirements Rectangular connectors. Detail specification for protective housings for use with 8-way shielded and unshielded connectors for frequencies up to 600 MHz for industrial environments incorporating the IEC 60603-7 series interface. Variant 13 related to IEC 61076-3-106. Locking lever
BS EN 60352-1:1998 Solderless connections Wrapped connections. General requirements, test methods and practical guidance
CEI EN 60352-3 : 1996 SOLDERLESS CONNECTIONS - PART 3: SOLDERLESS ACCESSIBLE INSULATION DISPLACEMENT CONNECTIONS GENERAL REQUIREMENTS, TEST METHODS AND PRACTICAL GUIDANCE
BS EN 60068-2-55:2013 Environmental testing Tests. Test Ee and guidance. Loose cargo testing including bounce
CEI EN 60393-1 : 2010 POTENTIOMETERS FOR USE IN ELECTRONIC EQUIPMENT - PART 1: GENERIC SPECIFICATION
CEI EN 61757-1 : 2013 FIBRE OPTIC SENSORS - PART 1: GENERIC SPECIFICATION
BS CECC 19000:1979 Harmonized system of quality assessment for electronic components: generic specification: dry reed make contact units
BS 2011-2.1EE(1988) : 1988 AMD 7828 ENVIRONMENTAL TESTING - TESTS - TEST Ee. BOUNCE
I.S. EN 60068-2-5:2011 ENVIRONMENTAL TESTING - PART 2-5: TESTS - TEST SA: SIMULATED SOLAR RADIATION AT GROUND LEVEL AND GUIDANCE FOR SOLAR RADIATION TESTING
CSA C61215 : 2008 : R2013 CRYSTALLINE SILICON TERRESTRIAL PHOTOVOLTAIC (PV) MODULES - DESIGN QUALIFICATION AND TYPE APPROVAL
CAN/CSA-IEC 61000-4-16:17 Electromagnetic compatibility (EMC) — Part 4-16: Testing and measurement techniques — Test for immunity to conducted, common mode disturbances in the frequency range 0 Hz to 150 kHz (Adopted IEC 61000-4-16:2015, second edition, 2015-12) | Compatibilité électromagnétique (CEM) — Partie 4-16 : Techniques d’essai et de mesure — Essai d’immunité aux perturbations conduites en mode commun dans la plage de fréquences de 0 Hz à 150 kHz (norme IEC 61000-4-16:2015 adoptée, deuxième édition, 2015:12)
DIN EN 61189-1:2002-04 TEST METHODS FOR ELECTRICAL MATERIALS, PRINTED BOARDS AND OTHER INTERCONNECTION STRUCTURES AND ASSEMBLIES - PART 1: GENERAL TEST METHODS AND METHODOLOGY
PREN 54-28 : DRAFT 2015 FIRE DETECTION AND FIRE ALARM SYSTEM - PART 28: NON-RESETTABLE LINE-TYPE HEAT DETECTORS
NF EN 60352-8 : 2011 SOLDERLESS CONNECTIONS - PART 8: COMPRESSION MOUNT CONNECTIONS - GENERAL REQUIREMENTS, TEST METHODS AND PRACTICAL GUIDANCE
CEI EN 50173-1 : 2011 INFORMATION TECHNOLOGY - GENERIC CABLING SYSTEMS - PART 1: GENERAL REQUIREMENTS
UNE-EN 50131-10:2014 Alarm systems - Intrusion and hold-up systems - Part 10: Application specific requirements for Supervised Premises Transceiver (SPT)
ISO 7240-18:2017 Fire detection and alarm systems — Part 18: Input/output devices
I.S. EN 62341-5:2009 ORGANIC LIGHT EMITTING DIODE (OLED) DISPLAYS - PART 5: ENVIRONMENTAL TESTING METHODS
IEC 60115-8-1:2014 Fixed resistors for use in electronic equipment - Part 8-1: Blank detail specification: Fixed surface mount (SMD) low power film resistors for general electronic equipment, classification level G
I.S. EN 168000:1994 QUARTZ CRYSTAL UNITS (GENERIC SPECIFICATION)
IEC TR 61340-1:2012 Electrostatics - Part 1: Electrostatic phenomena - Principles and measurements
CEI EN 61111 : 2010 LIVE WORKING - ELECTRICAL INSULATING MATTING
CSA T568.2 : 2005 COMMERCIAL BUILDING TELECOMMUNICATIONS CABLING STANDARD - PART 2: BALANCED TWISTED-PAIR CABLING COMPONENTS
DSCC 05017 : B CAPACITORS, FIXED ELECTROLYTIC (NONSOLID ELECTROLYTE), TANTALUM ANODE AND CATHODE
IEC 60384-1 REDLINE : 5ED 2016 FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 1: GENERIC SPECIFICATION
IEC 60068-3-5:2018 Environmental testing - Part 3-5: Supporting documentation and guidance - Confirmation of the performance of temperature chambers
IEC 62438:2010 Radiation protection instrumentation - Mobile instrumentation for the measurement of photon and neutron radiation in the environment
IEC 60068-5-1:1991 Environmental testing - Part 5-1: Guide to drafting of test methods - General principles
IEC 62908-13-10:2016 Touch and interactive displays - Part 13-10: Reliability test methods of touch displays - Environmental durability test methods
ISO 7240-16:2007 Fire detection and alarm systems — Part 16: Sound system control and indicating equipment
I.S. EN 61111:2009 LIVE WORKING - ELECTRICAL INSULATING MATTING
BS EN 138000:1997 Harmonized system of quality assessment for electronic components. Generic specification: fixed inductors for electromagnetic interference suppression (inductors for which safety tests are required)
I.S. EN 61000-4-14:1999 ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-14: TESTING AND MEASUREMENT TECHNIQUES - VOLTAGE FLUCTUATION IMMUNITY TEST FOR EQUIPMENT WITH INPUT CURRENT NOT EXCEEDING 16 A PER PHASE
CEI EN 60384-26 : 2011 FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 26: SECTIONAL SPECIFICATION - FIXED ALUMINIUM ELECTROLYTIC CAPACITORS WITH CONDUCTIVE POLYMER SOLID ELECTROLYTE
RE.AERO 68101 : 1991 CHARACTERIZATION OF CLIMATIC TEST CHAMBERS
I.S. EN 60505:2011 EVALUATION AND QUALIFICATION OF ELECTRICAL INSULATION SYSTEMS
I.S. CLC TS 50131-3:2003 ALARM SYSTEMS - INTRUSION SYSTEMS - PART 3: CONTROL AND INDICATING EQUIPMENT
IEC 61243-1:2003+AMD1:2009 CSV Live working - Voltage detectors - Part 1: Capacitive type to be used for voltages exceeding 1 kV a.c.
I.S. EN 61811-52:2002 ELECTROMECHANICAL ALL-OR-NOTHING RELAYS - PART 52: BLANK DETAIL SPECIFICATION - ELECTROMECHANICAL ALL-OR-NOTHING TELECOM RELAYS OF ASSESSED QUALITY - TWO CHANGE-OVER CONTACTS, 20 MM X 10 MM BASE
EN IEC 60068-2-5:2018 Environmental testing - Part 2-5: Tests - Test S: Simulated solar radiation at ground level and guidance for solar radiation testing and weathering
BS ISO 15003:2006 Agricultural engineering. Electrical and electronic equipment. Testing resistance to environmental conditions
CEI EN 60384-21 : 2013 FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 21: SECTIONAL SPECIFICATION - FIXED SURFACE MOUNT MULTILAYER CAPACITORS OF CERAMIC DIELECTRIC, CLASS 1
I.S. EN 60068-3-1:2011 ENVIRONMENTAL TESTING - PART 3-1: SUPPORTING DOCUMENTATION AND GUIDANCE - COLD AND DRY HEAT TESTS (IEC 60068-3-1:2011)
BS EN 60115-1 : 2011 FIXED RESISTORS FOR USE IN ELECTRONIC EQUIPMENT - PART 1: GENERIC SPECIFICATION
I.S. EN 61115:1994 EXPRESSION OF PERFORMANCE OF SAMPLE HANDLING SYSTEMS FOR PROCESS ANALYZERS
I.S. EN 50508:2009 MULTI-PURPOSE INSULATING STICKS FOR ELECTRICAL OPERATIONS ON HIGH VOLTAGE INSTALLATIONS
I.S. EN 60068-3-5:2002 ENVIRONMENTAL TESTING - PART 3-5: SUPPORTING DOCUMENTATION AND GUIDANCE - CONFIRMATION OF THE PERFORMANCE OF TEMPERATURE CHAMBERS
IEC 61196-8:2012 Coaxial communication cables - Part 8: Sectional specification for semi-flexible cables with polytetrafluoroethylene (PTFE) dielectric
I.S. EN 61019-1:2005 SURFACE ACOUSTIC WAVE (SAW) RESONATORS - PART 1: GENERIC SPECIFICATION
I.S. EN 60603-2:1998 CONNECTORS FOR FREQUENCIES BELOW 3 MHZ FOR USE WITH PRINTED BOARDS - PART 2: DETAIL SPECIFICATION FOR TWO-PART CONNECTORS WITH ASSESSED QUALITY, FOR PRINTED BOARDS, FOR BASIC GRID OF 2,54 MM (0,1 IN) WITH COMMON MOUNTING FEATURES
I.S. EN 61988-2-2:2003 PLASMA DISPLAY PANELS - PART 2-2: MEASURING METHODS - OPTOELECTRICAL
I.S. EN 50131-4:2009 ALARM SYSTEMS - INTRUSION AND HOLD-UP SYSTEMS - PART 4: WARNING DEVICES
I.S. EN 61753-111-8:2010 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS PERFORMANCE STANDARD - PART 111-8: SEALED CLOSURES FOR CATEGORY G - GROUND
I.S. EN 60115-8-1:2015 FIXED RESISTORS FOR USE IN ELECTRONIC EQUIPMENT - PART 8-1: BLANK DETAIL SPECIFICATION: FIXED SURFACE MOUNT (SMD) LOW POWER FILM RESISTORS FOR GENERAL ELECTRONIC EQUIPMENT, CLASSIFICATION LEVEL G
NF EN 54-30 : 2015 FIRE DETECTION AND FIRE ALARM SYSTEMS - PART 30: MULTI-SENSOR FIRE DETECTORS - POINT DETECTORS USING A COMBINATION OF CARBON MONOXIDE AND HEAT SENSORS
BS EN 61000-4-17 : 1999 ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-17: TESTING AND MEASUREMENT TECHNIQUES - RIPPLE ON D.C. INPUT POWER PORT IMMUNITY TEST
EN 62884-1:2017 Measurement techniques of piezoelectric, dielectric and electrostatic oscillators - Part 1: Basic methods for the measurement
I.S. EN 54-24:2008 FIRE DETECTION AND FIRE ALARM SYSTEMS - PART 24: COMPONENTS OF VOICE ALARM SYSTEMS - LOUDSPEAKERS
I.S. EN 60115-8:2012 FIXED RESISTORS FOR USE IN ELECTRONIC EQUIPMENT - PART 8: SECTIONAL SPECIFICATION - FIXED SURFACE MOUNT RESISTORS (IEC 60115-8:2009 (MOD))
NF EN 50483-1 : 2009 TEST REQUIREMENTS FOR LOW VOLTAGE AERIAL BUNDLED CABLE ACCESSORIES - PART 1: GENERALITIES
I.S. EN 50102:1997 DEGREES OF PROTECTION PROVIDED BY ENCLOSURES FOR ELECTRICAL EQUIPMENT AGAINST EXTERNAL MECHANICAL IMPACTS (IK CODE)
I.S. EN 16280:2012 BREATH ALCOHOL TEST DEVICES FOR GENERAL PUBLIC - REQUIREMENTS AND TEST METHODS
I.S. EN 60793-1-60:2017 OPTICAL FIBRES - PART 1-60: MEASUREMENT METHODS AND TEST PROCEDURES - BEAT LENGTH
I.S. EN 62040-5-3:2017 UNINTERRUPTIBLE POWER SYSTEMS (UPS) - PART 5-3: DC OUTPUT UPS - PERFORMANCE AND TEST REQUIREMENTS
I.S. EN 62271-202:2014 HIGH-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 202: HIGH-VOLTAGE/LOW-VOLTAGE PREFABRICATED SUBSTATION
I.S. EN 61000-4-17:2000 ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-17 - TESTING AND MEASUREMENT TECHNIQUES - RIPPLE ON D.C. INPUT POWER PORT IMMUNITY TEST
I.S. EN 54-23:2010 FIRE DETECTION AND FIRE ALARM SYSTEMS - PART 23: FIRE ALARM DEVICES - VISUAL ALARM DEVICES
I.S. EN 62674-1:2012 HIGH FREQUENCY INDUCTIVE COMPONENTS - PART 1: FIXED SURFACE MOUNT INDUCTORS FOR USE IN ELECTRONIC AND TELECOMMUNICATION EQUIPMENT (IEC 62674-1:2012 (EQV))
I.S. EN 60384-14:2016 FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 14: SECTIONAL SPECIFICATION - FIXED CAPACITORS FOR ELECTROMAGNETIC INTERFERENCE SUPPRESSION AND CONNECTION TO THE SUPPLY MAINS
IEC 62884-1:2017 Measurement techniques of piezoelectric, dielectric and electrostatic oscillators - Part 1: Basic methods for the measurement
NF EN 61112 : 2009 LIVE WORKING - ELECTRICAL INSULATING BLANKETS
I.S. EN IEC 60068-3-5:2018 ENVIRONMENTAL TESTING - PART 3-5: SUPPORTING DOCUMENTATION AND GUIDANCE - CONFIRMATION OF THE PERFORMANCE OF TEMPERATURE CHAMBERS
I.S. EN 60068-2-82:2007 ENVIRONMENTAL TESTING - PART 2-82: TESTS - TEST TX: WHISKER TEST METHODS FOR ELECTRONIC AND ELECTRIC COMPONENTS
I.S. EN 50131-2-7-3:2012 ALARM SYSTEMS - INTRUSION AND HOLD-UP SYSTEMS - PART 2-7-3: INTRUSION DETECTORS - GLASS BREAK DETECTORS (ACTIVE)
I.S. EN 60728-6:2011 CABLE NETWORKS FOR TELEVISION SIGNALS, SOUND SIGNALS AND INTERACTIVE SERVICES - PART 6: OPTICAL EQUIPMENT
BS EN 60384-9:2015 Fixed capacitors for use in electronic equipment Sectional specification: Fixed capacitors of ceramic dielectric, Class 2
BIS IS/ISO 8568 : 2007 MECHANICAL SHOCK - TESTING MACHINES - CHARACTERISTICS AND PERFORMANCE
I.S. EN 62852:2015 CONNECTORS FOR DC-APPLICATION IN PHOTOVOLTAIC SYSTEMS - SAFETY REQUIREMENTS AND TESTS
I.S. EN 61988-2-3:2009 PLASMA DISPLAY PANELS - PART 2-3: MEASURING METHODS - IMAGE QUALITY: DEFECTS AND DEGRADATION
IEEE/ANSI N42.38-2015 American National Standard for Performance Criteria for Spectroscopy-Based Portal Monitors Used in Homeland Security
I.S. EN 61747-10-1:2013 LIQUID CRYSTAL DISPLAY DEVICES - PART 10-1: ENVIRONMENTAL, ENDURANCE AND MECHANICAL TEST METHODS - MECHANICAL (IEC 61747-10-1:2013 (EQV))
I.S. EN 62137-1-2:2007 SURFACE MOUNTING TECHNOLOGY - ENVIRONMENTAL AND ENDURANCE TEST METHODS FOR SURFACE MOUNT SOLDER JOINT - PART 1-2: SHEAR STRENGTH TEST
ISO 7240-13:2005 Fire detection and alarm systems Part 13: Compatibility assessment of system components
CEI EN 60068-2-58 : 2016 ENVIRONMENTAL TESTING - PART 2-58: TESTS - TEST TD: TEST METHODS FOR SOLDERABILITY, RESISTANCE TO DISSOLUTION OF METALLIZATION AND TO SOLDERING HEAT OF SURFACE MOUNTING DEVICES (SMD)
CEI EN 60068-2-5 : 2012 ENVIRONMENTAL TESTING - PART 2: TESTS - TEST SA: SIMULATED SOLAR RADIATION AT GROUND LEVEL AND GUIDANCE FOR SOLAR RADIATION TESTING
CEI EN 62262 : 2008 DEGREES OF PROTECTION PROVIDED BY ENCLOSURES FOR ELECTRICAL EQUIPMENT AGAINST EXTERNAL MECHANICAL IMPACTS (IK CODE)
EN IEC 60068-3-6:2018/AC:2018-05 ENVIRONMENTAL TESTING - PART 3-6: SUPPORTING DOCUMENTATION AND GUIDANCE - CONFIRMATION OF THE PERFORMANCE OF TEMPERATURE/HUMIDITY CHAMBERS (IEC 60068-3-6:2018)
CEI EN 61760-4 : 2016 SURFACE MOUNTING TECHNOLOGY - PART 4: CLASSIFICATION, PACKAGING, LABELLING AND HANDLING OF MOISTURE SENSITIVE DEVICES
IEC TR 62349:2014 Guidance of measurement methods and test procedures - Basic tests for polarization-maintaining optical fibres
I.S. EN 60068-2-64:2008 ENVIRONMENTAL TESTING - PART 2-64: TESTS - TEST FH: VIBRATION, BROADBAND RANDOM AND GUIDANCE
CEI EN 60512-9-3 : 2012 CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 9-3: ENDURANCE TESTS - TEST 9C: MECHANICAL OPERATION (ENGAGING/SEPARATING) WITH ELECTRICAL LOAD
CEI EN 61747-1 : 2004 LIQUID CRYSTAL AND SOLID-STATE DISPLAY DEVICES - PART 1: GENERIC SPECIFICATION
I.S. EN 50548:2011 JUNCTION BOXES FOR PHOTOVOLTAIC MODULES
CEI EN 60728-6 : 2012 CABLE NETWORKS FOR TELEVISION SIGNALS, SOUND SIGNALS AND INTERACTIVE SERVICES - PART 6: OPTICAL EQUIPMENT
CEI EN 50131-2-4 : 2008 ALARM SYSTEMS - INTRUSION AND HOLD-UP SYSTEMS - PART 2-4: REQUIREMENTS FOR COMBINED PASSIVE INFRARED AND MICROWAVE DETECTORS
IEC PAS 62137-3:2008 Electronics assembly technology - Selection guidance of environmental and endurance test methods for solder joints
I.S. EN 54-5:2017 FIRE DETECTION AND FIRE ALARM SYSTEMS - PART 5: HEAT DETECTORS - POINT HEAT DETECTORS
I.S. EN 153000:1998 DISCRETE PRESSURE CONTACT POWER SEMICONDUCTOR DEVICES (QUALIFICATION APPROVAL) (GENERIC SPECIFICATION)
I.S. EN 60068-2-83:2011 ENVIRONMENTAL TESTING - PART 2-83: TESTS - TEST TF: SOLDERABILITY TESTING OF ELECTRONIC COMPONENTS FOR SURFACE MOUNTING DEVICES (SMD) BY THE WETTING BALANCE METHOD USING SOLDER PASTE (IEC 60068-2-83:2011 (EQV))
NF EN 15859 : 2010 AIR QUALITY - CERTIFICATION OF AUTOMATED DUST ARRESTMENT PLANT MONITORS FOR USE ON STATIONARY SOURCES - PERFORMANCE CRITERIA AND TEST PROCEDURES
CEI EN 60068-3-4 : 2002 ENVIRONMENTAL TESTING - PART 3-4: SUPPORTING DOCUMENTATION AND GUIDANCE DAMP HEAT TESTS
CEI EN 60068-3-1 : 2013 ENVIRONMENTAL TESTING - PART 3-1: SUPPORTING DOCUMENTATION AND GUIDANCE - COLD AND DRY HEAT TESTS
IEC 63004:2015 Standard for receiver fixture interface
IEC 60539-1:2016 Directly heated negative temperature coefficient thermistors - Part 1: Generic specification
I.S. EN 61753-1:2007 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS PERFORMANCE STANDARD - PART 1: GENERAL AND GUIDANCE FOR PERFORMANCE STANDARDS
I.S. EN 60212:2011 STANDARD CONDITIONS FOR USE PRIOR TO AND DURING THE TESTING OF SOLID ELECTRICAL INSULATING MATERIALS
I.S. EN 61076-2:2011 CONNECTORS FOR ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 2: SECTIONAL SPECIFICATION FOR CIRCULAR CONNECTORS
I.S. EN 60384-22:2012 FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 22: SECTIONAL SPECIFICATION - FIXED SURFACE MOUNT MULTILAYER CAPACITORS OF CERAMIC DIELECTRIC, CLASS 2 (IEC 60384-22:2011 (EQV))
BS EN 60603-7 : 2009 CONNECTORS FOR ELECTRONIC EQUIPMENT - PART 7: DETAIL SPECIFICATION FOR 8-WAY, UNSHIELDED, FREE AND FIXED CONNECTORS
13/30277397 DC : 0 BS EN 54-11 - FIRE DETECTION AND FIRE ALARM SYSTEMS - PART 11: MANUAL CALL POINTS
DIN EN 54-7:2015-07 (Draft) FIRE DETECTION AND FIRE ALARM SYSTEMS - PART 7: SMOKE DETECTORS - POINT DETECTORS USING SCATTERED LIGHT, TRANSMITTED LIGHT OR IONIZATION
I.S. EN 61481-2:2014 LIVE WORKING - PHASE COMPARATORS - PART 2: RESISTIVE TYPE TO BE USED FOR VOLTAGES FROM 1 KV TO 36 KV A.C.
CEI EN 60384-22 : 2013 FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 22: SECTIONAL SPECIFICATION - FIXED SURFACE MOUNT MULTILAYER CAPACITORS OF CERAMIC DIELECTRIC, CLASS 2
I.S. EN 60728-3:2011 CABLE NETWORKS FOR TELEVISION SIGNALS, SOUND SIGNALS AND INTERACTIVE SERVICES - PART 3: ACTIVE WIDEBAND EQUIPMENT FOR CABLE NETWORKS
I.S. EN 60393-6:2016 POTENTIOMETERS FOR USE IN ELECTRONIC EQUIPMENT - PART 6: SECTIONAL SPECIFICATION - SURFACE MOUNT PRESET POTENTIOMETERS
UNE-EN 61000-4-21:2012 Electromagnetic compatibility (EMC) -- Part 4-21: Testing and measurement techniques - Reverberation chamber test methods
ISO 12239:2010 Smoke alarms using scattered light, transmitted light or ionization
EN IEC 62246-1-1:2018 Reed switches - Part 1-1: Generic specification - Blank detail specification
I.S. EN 62718:2016 RAILWAY APPLICATIONS - ROLLING STOCK - DC SUPPLIED ELECTRONIC BALLASTS FOR LIGHTING FLUORESCENT LAMPS
IEC 61988-2-6:2015 Plasma display panels - Part 2-6: Measuring methods - APL dependent gamma and colour characteristics
VDE 0468-2-69 : 2018 ENVIRONMENTAL TESTING - PART 2-69: TESTS - TEST TE/TC: SOLDERABILITY TESTING OF ELECTRONIC COMPONENTS AND PRINTED BOARDS BY THE WETTING BALANCE (FORCE MEASUREMENT) METHOD (IEC 60068-2-69:2017)
IEC 61076-3-104:2017 Connectors for electrical and electronic equipment - Product requirements - Part 3-104: Detail specification for 8-way, shielded free and fixed connectors for data transmissions with frequencies up to 2 000 MHz
DIN EN 61180-2 : 1995 HIGH-VOLTAGE TEST TECHNIQUES FOR LOW-VOLTAGE EQUIPMENT - PART 2: TEST EQUIPMENT
IEC 60107-1:1997 Methods of measurement on receivers for television broadcast transmissions - Part 1: General considerations - Measurements at radio and video frequencies
CEI EN 60793-1-60 : 1ED 2017 OPTICAL FIBRES - PART 1-60: MEASUREMENT METHODS AND TEST PROCEDURES - BEAT LENGTH
VDE 0432-11 : 1995 HIGH-VOLTAGE TEST TECHNIQUES FOR LOW-VOLTAGE EQUIPMENT - PART 2: TEST EQUIPMENT
BS EN 60384-20:2015 Fixed capacitors for use in electronic equipment Sectional specification. Fixed metallized polyphenylene sulfide film dielectric surface mount d.c. capacitors
IEC 60068-3-5 REDLINE : 2.0 ENVIRONMENTAL TESTING - PART 3-5: SUPPORTING DOCUMENTATION AND GUIDANCE - CONFIRMATION OF THE PERFORMANCE OF TEMPERATURE CHAMBERS
I.S. EN 175300:1998 RECTANGULAR CONNECTORS FOR FREQUENCIES BELOW 3 MHZ (SECTIONAL SPECIFICATION)
I.S. EN 61076-2-105:2008 CONNECTORS FOR ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 2-105: CIRCULAR CONNECTORS - DETAIL SPECIFICATION FOR M5 CONNECTORS WITH SCREW-LOCKING
NF EN 61189-5 : 2008 TEST METHODS FOR ELECTRICAL MATERIALS, INTERCONNECTION STRUCTURES AND ASSEMBLIES - PART 5: TEST METHODS FOR PRINTED BOARD ASSEMBLIES
IEC PAS 61811-55:2000 Electromechanical all-or-nothing relays - Part 55: Blank detail specification - Electromechanical all-or-nothing telecom relays of assessed quality - Two change-over contacts, 11 mm x 7,5 mm (max.) base
UNE-EN 60068-2-5:2011 Environmental testing - Part 2-5: Tests - Test Sa: Simulated solar radiation at ground level and guidance for solar radiation testing
CEI EN 60384-4 : 2007 FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 4: SECTIONAL SPECIFICATION - FIXED ALUMINIUM ELECTROLYTIC CAPACITORS WITH SOLID (MNO[2]) AND NON-SOLID ELECTROLYTE
OIML R 114 : 1995 CLINICAL ELECTRICAL THERMOMETERS FOR CONTINUOUS MEASUREMENT
CLC/TS 50131-2-7-1:2009 Alarm systems - Intrusion and hold-up systems - Part 2-7-1: Intrusion detectors - Glass break detectors (acoustic)
CEI EN 60068-2-78 : 2013 ENVIRONMENTAL TESTING - PART 2-78: TESTS - TEST CAB: DAMP HEAT, STEADY STATE
CEI EN 50131-4 : 2010 ALARM SYSTEMS - INTRUSION AND HOLD-UP SYSTEMS - PART 4: WARNING DEVICES
NF EN 61076 4 113 : 2005 CONNECTORS FOR ELECTRONIC EQUIPMENT - PRINTED BOARD CONNECTORS - PART 4-113: DETAIL SPECIFICATION FOR TWO-PART CONNECTORS HAVING 5 ROWS WITH A GRID OF 2,54 MM FOR PRINTED BOARDS AND BACKPLANES IN BUS APPLICATIONS
IEC 60571-3:1990 Electronic equipment used on rail vehicles. Part 3: Components, programmable electronic equipment and electronic system reliability
CEI EN 61988-2-1 : 2012 PLASMA DISPLAY PANELS - PART 2-1: MEASURING METHODS - OPTICAL AND OPTOELECTRICAL
CEI EN 60143-4 : 2012 SERIES CAPACITORS FOR POWER SYSTEMS - PART 4: THYRISTOR CONTROLLED SERIES CAPACITORS
CEI EN 60603-1 : 2001 CONNECTORS FOR FREQUENCIES BELOW 3 MHZ FOR USE WITH PRINTED BOARDS - PART 1: GENERIC SPECIFICATION; GENERAL REQUIREMENTS AND GUIDE FOR THE PREPARATION OF DETAIL SPECIFICATIONS, WITH ASSESSED QUALITY
BIS IS/ISO 7240-15 : 2004 FIRE DETECTION AND ALARM SYSTEMS - PART 15: POINT TYPE FIR E DETECTORS USING SCATTERED LIGHT, TRANSMITTED LIGHT OR IONIZATION SENSORS IN COMBINATION WITH A HEAT SENSOR
NF EN 60393-6 : 2016 POTENTIOMETERS FOR USE IN ELECTRONIC EQUIPMENT - PART 6: SECTIONAL SPECIFICATION - SURFACE MOUNT PRESET POTENTIOMETERS
NF EN 60068-2-53 : 2010 ENVIRONMENTAL TESTING - PART 2-53: TESTS AND GUIDANCE: COMBINED CLIMATIC (TEMPERATURE/HUMIDITY) AND DYNAMIC (VIBRATION/SHOCK) TESTS
NF EN 50132-4-1 : 2002 ALARM SYSTEMS - CCTV SURVEILLANCE SYSTEMS FOR USE IN SECURITY APPLICATIONS - PART 4-1: BLACK AND WHITE MONITORS
NF EN 61076-2-105 : 2009 CONNECTORS FOR ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 2-105: CIRCULAR CONNECTORS - DETAIL SPECIFICATION FOR M5 CONNECTORS WITH SCREW-LOCKING
I.S. EN 61189-3:2008 TEST METHODS FOR ELECTRICAL MATERIALS, PRINTED BOARDS AND OTHER INTERCONNECTION STRUCTURES AND ASSEMBLIES - PART 3: TEST METHODS FOR INTERCONNECTION STRUCTURES (PRINTED BOARDS)
I.S. EN 60368-1:2000 PIEZOELECTRIC FILTERS OF ASSESSED QUALITY - PART 1: GENERIC SPECIFICATION
EN 60384-25:2015 Fixed capacitors for use in electronic equipment - Part 25: Sectional specification - Fixed aluminium electrolytic surface mount capacitors with conductive polymer solid electrolyte
NF EN 61243-1 : 2005 AMD 1 2010 LIVE WORKING - VOLTAGE DETECTORS - PART 1: CAPACITIVE TYPE TO BE USED FOR VOLTAGES EXCEEDING 1 KV A.C.
I.S. EN 60068-2-70:1997 ENVIRONMENTAL TESTING - PART 2: TESTS - TEST XB: ABRASION OF MARKINGS AND LETTERINGS CAUSED BY RUBBING OF FINGERS AND HANDS
IEC 61000-4-16 : 2.0 ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-16: TESTING AND MEASUREMENT TECHNIQUES - TEST FOR IMMUNITY TO CONDUCTED, COMMON MODE DISTURBANCES IN THE FREQUENCY RANGE 0 HZ TO 150 KHZ
I.S. EN 50134-3:2012 ALARM SYSTEMS - SOCIAL ALARM SYSTEMS - PART 3: LOCAL UNIT AND CONTROLLER
IEC TR 61189-3-914:2017 Test methods for electrical materials, printed boards and other interconnection structures and assemblies - Part 3-914: Test method for thermal conductivity of printed circuit boards for high-brightness LEDs - Guidelines
IEC 60839-2-5:1990 Alarm systems. Part 2: Requirements for intruder alarm systems. Section Five: Microwave Doppler detectors for use in buildings
I.S. EN 60107-1:1999 METHODS OF MEASUREMENT ON RECEIVERS FOR TELEVISION BROADCAST TRANSMISSION - PART 1: GENERAL CONSIDERATIONS - MEASUREMENTS ON DISPLAYS AT RADIO AND VIDEO FREQUENCIES
IEC 60605-3-6:1996 Equipment reliability testing - Part 3: Preferred test conditions - Section 6: Test cycle 6: Outdoor transportable equipment - Low degree of simulation
NF EN 50131-2-4 : 2008 ALARM SYSTEMS - INTRUSION AND HOLD-UP SYSTEMS - PART 2-4: REQUIREMENTS FOR COMBINED PASSIVE INFRARED AND MICROWAVE DETECTORS
IEC 62642-2-5:2010 Alarm systems - Intrusion and hold-up systems - Part 2-5: Intrusion detectors - Combined passive infrared / Ultrasonic detectors
IEC 61643-21:2000+AMD1:2008+AMD2:2012 CSV Low voltage surge protective devices - Part 21: Surge protective devices connected to telecommunications and signalling networks - Performance requirements and testing methods
IEC 61757:2018 Fibre optic sensors - Generic specification
I.S. EN 61169-40:2011 RADIO-FREQUENCY CONNECTORS - PART 40: SECTIONAL SPECIFICATION FOR 2.4 SERIES RF CONNECTORS
IEC 61988-4-1:2015 Plasma display panels - Part 4-1: Environmental testing methods - Climatic and mechanical
IEC PAS 61076-3-126:2018 Connectors for electrical and electronic equipment - Product requirements - Part 3-126: Rectangular connectors - Detail specification for 5 pole power connector for industrial environments with push-pull locking
IEC PAS 61076-3-110:2002 Connectors for electronic equipment - Part 3-110: Detail specification for 8 way connectors for frequencies up to 600 MHz
I.S. EN 62040-3:2011 UNINTERRUPTIBLE POWER SYSTEMS (UPS) - PART 3: METHOD OF SPECIFYING THE PERFORMANCE AND TEST REQUIREMENTS
S.R. CEN ISO TS 24534-2:2007 AUTOMATIC VEHICLE AND EQUIPMENT IDENTIFICATION - ELECTRONIC REGISTRATION IDENTIFICATION (ERI) FOR VEHICLES - PART 2: OPERATIONAL REQUIREMENTS
IEC 61643-331:2017 Components for low-voltage surge protective devices - Part 331: Performance requirements and test methods for metal oxide varistors (MOV)
I.S. EN 60115-9:2004 FIXED RESISTORS FOR USE IN ELECTRONIC EQUIPMENT - PART 9: SECTIONAL SPECIFICATION - FIXED SURFACE MOUNT RESISTOR NETWORKS WITH INDIVIDUALLY MEASURABLE RESISTORS
UNE-EN 54-3:2016 Fire detection and fire alarm systems - Part 3: Fire alarm devices - Sounders
DIN EN 15267-3:2008-03 Air quality - Certification of automated measuring systems - Part 3: Performance criteria and test procedures for automated measuring systems for monitoring emissions from stationary sources; German version EN 15267-3:2007
DIN EN 54-23 :2010-06 FIRE DETECTION AND FIRE ALARM SYSTEMS - PART 23: FIRE ALARM DEVICES - VISUAL ALARM DEVICES
DIN EN 54-20 E : 2009 FIRE DETECTION AND FIRE ALARM SYSTEMS - PART 20: ASPIRATING SMOKE DETECTORS
DIN EN 14604:2016-02 (Draft) Smoke alarm devices; German and English version prEN 14604:2016
DIN EN 54-18 E : 2006 FIRE DETECTION AND FIRE ALARM SYSTEMS - PART 18: INPUT/OUTPUT DEVICES
DIN EN 54-12 E : 2015 FIRE DETECTION AND FIRE ALARM SYSTEMS - PART 12: SMOKE DETECTORS - LINE DETECTORS USING AN OPTICAL BEAM
BS EN 61189-5-1:2016 Test methods for electrical materials, printed boards and other interconnection structures and assemblies General test methods for materials and assemblies. Guidance for printed board assemblies
IEC 61189-5-2:2015 Test methods for electrical materials, printed boards and other interconnection structures and assemblies - Part 5-2: General test methods for materials and assemblies - Soldering flux for printed board assemblies
IEC 61000-4-18:2006+AMD1:2010 CSV Electromagnetic compatibility (EMC) - Part 4-18: Testing and measurement techniques - Damped oscillatory wave immunity test
IEC 60794-1:1996 Optical fibre cables - Part1: Generic specification (Revision to IEC 794-1)
EN 54-22:2015 Fire detection and fire alarm systems - Part 22: Resettable line-type heat detectors
ISO 10472-1:1997 Safety requirements for industrial laundry machinery Part 1: Common requirements
IEC 61508-7:2010 Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 7: Overview of techniques and measures (see Functional Safety and IEC 61508)
IEC 61076-4-105:1995 Connectors with assessed quality, for use in d.c., low frequency analogue and in digital high-speed data applications - Part 4: Printed board connectors - Section 105 : Detail specification for 9 mm circular connector with 3 to 8 contacts for use in a wide range of applications including the telecommunication .
IEC 60512-1:2001 Connectors for electronic equipment - Tests and measurements - Part 1: General
IEC 60068-2-21:2006 Environmental testing - Part 2-21: Tests - Test U: Robustness of terminations and integral mounting devices
IEC 62137-1-3:2008 Surface mounting technology - Environmental and endurance test methods for surface mount solder joint - Part 1-3: Cyclic drop test
IEC 60440:2012 Method of measurement of non-linearity in resistors
UNE-EN 61508-7:2011 Functional safety of electrical/electronic/programmable electronic safety-related systems -- Part 7: Overview of techniques and measures
IEC 61000-4-17:1999+AMD1:2001+AMD2:2008 CSV Electromagnetic compatibility (EMC) - Part 4-17: Testing and measurement techniques - Ripple on d.c. input power port immunity test
IEC 60749:1996+AMD1:2000+AMD2:2001 CSV Semiconductor devices - Mechanical and climatic test methods
IEC 62137:2004 Environmental and endurance testing - Test methods for surface-mount boards of area array type packages FBGA, BGA, FLGA, LGA, SON and QFN
IEC 61338-2:2004 Waveguide type dielectric resonators - Part 2: Guidelines for oscillator and filter applications
IEC 60747-5-3:1997+AMD1:2002 CSV Discrete semiconductor devices and integrated circuits - Part 5-3: Optoelectronic devices - Measuring methods
IEC 61076-6:2004 Connectors for electronic equipment - Part 6: Loose part contacts - Sectional specification
EN 50131-2-4:2008 Alarm systems - Intrusion and hold-up systems - Part 2-4: Requirements for combined passive infrared and microwave detectors
EN 60384-13:2012 Fixed capacitors for use in electronic equipment - Part 13: Sectional specification - Fixed polypropylene film dielectric metal foil d.c. capacitors
EN 60352-7:2002 Solderless connections - Part 7: Spring clamp connections - General requirements, test methods and practical guidance
DIN EN 54-10:2002-05 FIRE DETECTION AND FIRE ALARM SYSTEMS - PART 10: FLAME DETECTORS - POINT DETECTORS
IEC 61000-4-12:2017 Electromagnetic Compatibility (EMC) - Part 4-12: Testing and measurement techniques - Ring wave immunity test
IEC 60068-2-52:2017 RLV Environmental testing - Part 2-52: Tests - Test Kb: Salt mist, cyclic (sodium chloride solution)
DIN EN 1987-3:2000-07 ELECTRICALLY PROPELLED ROAD VEHICLES - SPECIFIC REQUIREMENTS FOR SAFETY - PART 3: PROTECTION OF USERS AGAINST ELECTRICAL HAZARDS
IEC 60728-3:2017 Cable networks for television signals, sound signals and interactive services - Part 3: Active wideband equipment for cable networks
DIN EN 54-3:2001-10 FIRE DETECTION AND FIRE ALARM SYSTEMS - PART 3: FIRE ALARM DEVICES - SOUNDERS
IEC 61000-4-16:2015 Electromagnetic compatibility (EMC) - Part 4-16: Testing and measurement techniques - Test for immunity to conducted, common mode disturbances in the frequency range 0 Hz to 150 kHz
I.S. EN ISO 10472-1:2008 SAFETY REQUIREMENTS FOR INDUSTRIAL LAUNDRY MACHINERY - PART 1: COMMON REQUIREMENTS
EN 60947-1:2007/A2:2014 LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 1: GENERAL RULES (IEC 60947-1:2007/A2:2014)
CEI EN 61000-4-20 : 2013 ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-20: TESTING AND MEASUREMENT TECHNIQUES - EMISSION AND IMMUNITY TESTING IN TRANSVERSE ELECTROMAGNETIC (TEM) WAVEGUIDES
EN 60603-7:2009/A1:2011 CONNECTORS FOR ELECTRONIC EQUIPMENT - PART 7: DETAIL SPECIFICATION FOR 8-WAY, UNSHIELDED, FREE AND FIXED CONNECTORS (IEC 60603-7:2008/A1:2011)
VDE V 0847-204 : 1996 PRUEFUNG DER STOERFESTIGKEIT GEGEN HOCHFREQUENTE ELEKTROMAGNETISCHE FELDER VON DIGITALEN FUNKTELEFONEN
DIN EN 61270-1 : 1997 CAPACITORS FOR MICROWAVE OVENS - PART 1: GENERAL
BS 4054-1:1995 Methods of measuring and expressing the performance of radio receivers for sound broadcasting General considerations and methods of measurement, including audio-frequency measurements
VDE 0560-800 : 1998 GENERIC SPECIFICATION - FIXED ALUMINIUM ELECTROLYTIC A.C. CAPACITORS WITH NON-SOLID ELECTROLYTE FOR USE WITH MOTORS
BS QC 760200:1997 Harmonized system of quality assessment for electronic components. Semiconductor devices. Integrated circuits. Sectional specification for film integrated circuits and hybrid film integrated circuits on the basis of the capability approval procedures
BS 2011-2.1T:1981 Environmental testing. Tests Test T. Soldering
DIN EN 137000 : 1998-03 GENERIC SPECIFICATION - FIXED ALUMINIUM ELECTROLYTIC A.C. CAPACITORS WITH NON-SOLID ELECTROLYTE FOR USE WITH MOTORS
DIN EN 60938-1 : 2008 FIXED INDUCTORS FOR ELECTROMAGNETIC INTERFERENCE SUPPRESSION - PART 1: GENERIC SPECIFICATION
NBR IEC 60068-2-75 : 2007 ENVIRONMENTAL TESTING - PART 2: TESTS - TEST EH: HAMMER TEST
BS CECC 30400:1984 Harmonized system of quality assessment for electronic components. Sectional specification: fixed metallized polyethylene-terephthalate film dielectric capacitors for direct current
BS 2011-2.1M:1984 Environmental testing. Tests Test M. Low air pressure
BS 6493-1.5:1992 Semiconductor devices. Discrete devices Recommendations for optoelectronic devices - Section 5: Recommendations for optoelectronic devices
BS 2011-2.1Db:1981 Environmental testing. Tests Test Db and guidance : Damp heat, cyclic (12 + 12 hour cycle)
BS 2011-2.1R:1990 Environmental testing. Tests Test R and guidance. Water
VDE 0560-22 : 1997 CAPACITORS FOR MICROWAVE OVENS - PART 1: GENERAL
BS CECC 50000:1987 Harmonized system of quality assessment for electronic components. Generic specification: discrete semiconductor devices
BS 2011-2.1Fc:1983 Environmental testing. Tests Test Fc. Vibration (sinusoidal)
BS CECC 30900:1986 Harmonized system of quality assessment for electronic components. Sectional specification: fixed polystyrene film dielectric metal foil d.c. capacitors
BS CECC17000(1992) : 1992 AMD 9626 HARMONIZED SYSTEM OF QUALITY ASSESSMENT FOR ELECTRONIC COMPONENTS - GENERIC SPECIFICATION - SOLID STATE ALL OR NOTHING RELAYS - GENERIC DATA AND METHODS OF TEST
VDE 0435-140 : 1999 ELECTROMECHANICAL NON-SPECIFIED TIME ALL-OR-NOTHING ELECTRICAL RELAYS - INSULATION COORDINATION
CEI EN 62040-3 : 2015 UNINTERRUPTIBLE POWER SYSTEMS (UPS) - PART 3: METHOD OF SPECIFYING THE PERFORMANCE AND TEST REQUIREMENTS
CEI EN 60068-2-61 : 1997 ENVIRONMENTAL TESTING - PART 2: TEST METHODS TEST Z/ABDM: CLIMATIC SEQUENCE
08/30181362 DC : DRAFT APR 2008 BS EN 60384-14 - FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 14: SECTIONAL SPECIFICATION - FIXED CAPACITORS FOR ELECTROMAGNETIC INTERFERENCE SUPPRESSION AND CONNECTION TO THE SUPPLY MAINS
08/30193237 DC : 0 BS EN 50528 - INSULATING LADDERS FOR USE ON OR NEAR LOW VOLTAGE ELECTRICAL INSTALLATIONS
09/30152273 DC : 0 BS IEC/TS 60034-20-2 - ROTATING ELECTRICAL MACHINES - PART 20-2: PERFORMANCE CHARACTERISTICS AND TESTING SPECIFICATIONS FOR BRUSHLESS PERMANENT MAGNET MOTORS
07/30149142 DC : 0 BS IEC 60115-1 - FIXED RESISTORS FOR USE IN ELECTRONIC EQUIPMENT - PART 1: GENERIC SPECIFICATION
BS EN 60068-2-2:2007 Environmental testing Tests. Test B. Dry heat
BS EN 62333-3:2010 Noise suppression sheet for digital devices and equipment Characterization of parameters of noise suppression sheet
I.S. EN 60603-7-1:2011 CONNECTORS FOR ELECTRONIC EQUIPMENT - PART 7-1: DETAIL SPECIFICATION FOR 8-WAY, SHIELDED, FREE AND FIXED CONNECTORS
BS EN 60352-5:2012 Solderless connections Press-in connections. General requirements, test methods and practical guidance
08/30171613 DC : DRAFT JUNE 2008 BS EN 61753-111-9 - FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - PERFORMANCE STANDARD - PART 111-9: CLOSURES FOR CATEGORY S - SUBTERRANEAN
11/30244521 DC : 0 BS EN 61076-3-100 - CONNECTORS FOR ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 3-110: DETAIL SPECIFICATION FOR SHIELDED, FREE AND FIXED CONNECTORS FOR DATA TRANSMISSION WITH FREQUENCIES UP TO 1000 MHZ
BS EN 60068-2-58 : 2015 ENVIRONMENTAL TESTING - PART 2-58: TESTS - TEST TD: TEST METHODS FOR SOLDERABILITY, RESISTANCE TO DISSOLUTION OF METALLIZATION AND TO SOLDERING HEAT OF SURFACE MOUNTING DEVICES (SMD)
BS EN ISO 24534-2:2010 Automatic vehicle and equipment identification. Electronic Registration Identification (ERI) for vehicles Operational requirements
NF EN 60068 2-5 : 2011 ENVIRONMENTAL TESTING - PART 2-5: TESTS - TEST SA: SIMULATED SOLAR RADIATION AT GROUND LEVEL AND GUIDANCE FOR SOLAR RADIATION TESTING
DIN EN 54-23:2010-06 Fire detection and fire alarm systems - Part 23: Fire alarm devices - Visual alarm devices
BS EN 61811-52:2002 Electromechanical all-or-nothing relays Blank detail specification. Electromechanical all-or-nothing telecom relays of assessed quality. Two change-over contacts, 20 mm x 10 mm base
14/30309692 DC : 0 BS EN 61189-5-1 ED 1.0 - TEST METHODS FOR ELECTRICAL MATERIALS, INTERCONNECTION STRUCTURES AND ASSEMBLIES - PART 5-1: TEST METHODS FOR PRINTED BOARD ASSEMBLIES AND MATERIALS USED IN MANUFACTURING ELECTRONIC ASSEMBLIES - GUIDANCE DOCUMENTS AND HANDBOOKS
IEC 61020-6:1991 Electromechanical switches for use in electronic equipment - Part 6: Sectional specification for sensitive switches
BS EN 60393-6:2016 Potentiometers for use in electronic equipment Sectional specification. Surface mount preset potentiometers
BS EN 62137:2004 Environmental and endurance testing. Test methods for surface-mount boards of area array type packages FBGA, BGA, FLGA, LGA, SON and QFN
CEI EN 60068-3-5 : 2002 ENVIRONMENTAL TESTING - PART 3-5: SUPPORTING DOCUMENTATION AND GUIDANCE CONFIRMATION OF THE PERFORMANCE OF TEMPERATURE CHAMBERS
CEI EN 60068-2-43 : 2004 ENVIRONMENTAL TESTING - PART 2-43: TESTS -TEST KD: HYDROGEN SULPHIDE TEST FOR CONTACTS AND CONNECTIONS
BS EN 61811-1:2015 Electromechanical telecom elementary relays of assessed quality Generic specification and blank detail specification
PREN 54-5 : DRAFT 2011 FIRE DETECTION AND FIRE ALARM SYSTEMS - PART 5: HEAT DETECTORS - POINT DETECTORS
11/30236311 DC : 0 BS ISO 7240-10 - FIRE DETECTION AND ALARM SYSTEMS - PART 10: POINT-TYPE FLAME DETECTORS
03/100166 DC : DRAFT JAN 2003 IEC 60603-7-5 ED.1.0 - CONNECTORS FOR ELECTRONIC EQUIPMENT - PART 7-5: DETAIL SPECIFICATION FOR 8-WAY, SHIELDED, FREE AND FIXED CONNECTORS, FOR DATA TRANSMISSIONS WITH FREQUENCIES UP TO 250 MHZ
BS EN 61076-3-110:2016 Connectors for electronic equipment. Product requirements Detail specification for free and fixed connectors for data transmission with frequencies up to 3 000 MHz
BS CECC 64000:1990 Harmonized system of quality assessment for electronic components: generic specification: film resistor networks
EN 61076-3-122:2017 Connectors for electrical and electronic equipment - Product requirements - Part 3-122: Detail specification for 8-way, shielded, free and fixed connectors for I/O and Gigabit Ethernet applications in harsh environments
BS CECC 41300:1979 Harmonized system of quality assessment for electronic components. Sectional specification: low power single-turn rotary potentiometers
13/30287806 DC : 0 BS EN 60539-1 - DIRECTLY HEATED NEGATIVE TEMPERATURE COEFFICIENT THERMISTORS - PART 1: GENERIC SPECIFICATION
IEC 61000-4-12 : 3.0 ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-12: TESTING AND MEASUREMENT TECHNIQUES - RING WAVE IMMUNITY TEST
BS EN 60115-2:2015 Fixed resistors for use in electronic equipment Sectional specification: Leaded fixed low power film resistors
03/316776 DC : DRAFT NOV 2003 BS EN ISO 14815 - ROAD TRAFFIC AND TRANSPORT AND TELEMATICS - AUTOMATIC VEHICLE AND EQUIPMENT IDENTIFICATION - SYSTEM SPECIFICATION
11/30241337 DC : DRAFT JAN 2011 BS EN 61757-1 - FIBRE OPTIC SENSORS - PART 1: GENERIC SPECIFICATION
BS ISO 16437:2012 Ships and marine technology. Lifesaving and fire protection. Atmospheric oil mist detectors for ships
07/30162213 DC : 0 BS EN 60747-15 - SEMICONDUCTOR DEVICES - DISCRETE DEVICES - PART 15: ISOLATED POWER SEMICONDUCTOR DEVICES
BS EN 60352-8:2011 Solderless connections Compression mount connections. General requirements, test methods and practical guidance
BS EN 61988-2-3:2009 Plasma display panels Measuring methods. Image quality. Defects and degradation
16/30353588 DC : 0 BS EN 61020-1 ED 3.0 - ELECTROMECHANICAL SWITCHES FOR USE IN ELECTRICAL AND ELECTRONIC EQUIPMENT - PART 1: GENERIC SPECIFICATION
17/30296023 DC : DRAFT MAR 2017 BS ISO 19453-4 - ROAD VEHICLES - ENVIRONMENTAL CONDITIONS AND TESTING FOR ELECTRICAL AND ELECTRONIC EQUIPMENT FOR DRIVE SYSTEM OF ELECTRIC PROPULSION VEHICLES - PART 4: CLIMATIC LOADS
BS EN 60728-6:2011 Cable networks for television signals, sound signals and interactive services Optical equipment
05/30134095 DC : DRAFT MAY 2005 IEC 61587-1 ED 2 - MECHANICAL STRUCTURES FOR ELECTRONIC EQUIPMENT - TESTS FOR IEC 60917 AND 60297 - PART 1: CLIMATIC, MECHANICAL TESTS AND SAFETY ASPECTS FOR CABINETS, RACKS AND SUBRACKS
14/30311689 DC : 0 BS EN 61169-11 ED 1.0 - RADIO-FREQUENCY CONNECTORS - PART 11: SECTIONAL SPECIFICATION FOR RF COAXIAL CONNECTORS WITH INNER DIAMETER OF OUTER CONDUCTOR 9.5 MM WITH THREADED COUPLING - CHARACTERISTIC IMPEDANCE 50 OHM (TYPE 4.1-9.5)
09/30196772 DC : 0 BS ISO 7240-24 - FIRE DETECTION AND FIRE ALARM SYSTEMS - PART 24: SOUND-SYSTEM LOUDSPEAKERS
01/205810 DC : DRAFT AUG 2001 IEC 61215 ED.2.0 - CRYSTALLINE SILICON TERRESTRIAL PHOTOVOLTAIC (PV) MODULES - DESIGN QUALIFICATION AND TYPE APPROVAL
IEC 61196-6:2009 Coaxial communication cables - Part 6: Sectional specification for CATV drop cables
06/30150988 DC : DRAFT MAY 2006
13/30284045 DC : 0 BS EN 60384-23 - FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 23: SECTIONAL SPECIFICATION: FIXED SURFACE MOUNT METALLIZED POLYETHYLENE NAPHTHALATE FILM DIELECTRIC D.C. CAPACITORS
BS EN 61988-2-5:2012 Plasma display panels Measuring methods. Acoustic noise
CEI EN 62421 : 2008 ELECTRONICS ASSEMBLY TECHNOLOGY - ELECTRONIC MODULES
IEC 61196-9:2014 Coaxial communication cables - Part 9: Sectional specification for RF flexible cables
I.S. EN 50131-2-6:2008 ALARM SYSTEMS - INTRUSION AND HOLD-UP SYSTEMS - PART 2-6: OPENING CONTACTS (MAGNETIC)
CEI EN 61076-2-107 : 2011 CONNECTORS FOR ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 2-107: DETAIL SPECIFICATION FOR CIRCULAR HYBRID CONNECTORS M12 WITH ELECTRICAL AND FIBRE-OPTIC CONTACTS WITH SCREW LOCKING
DD IEC PAS 62137-3 : DRAFT 2008 ELECTRONICS ASSEMBLY TECHNOLOGY - SELECTION GUIDANCE OF ENVIRONMENTAL AND ENDURANCE TEST METHODS FOR SOLDER JOINTS
CEI EN 60352-5 : 2013 SOLDERLESS CONNECTIONS - PART 5: PRESS-IN CONNECTIONS - GENERAL REQUIREMENTS, TEST METHODS AND PRACTICAL GUIDANCE
10/30216216 DC : 0 BS EN 60384-13:2006/A1 - FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 13: SECTIONAL SPECIFICATION - FIXED POLYPROPYLENE FILM DIELECTRIC METAL FOIL D.C. CAPACITORS
NF EN 61076-3-118 : 2011 CONNECTORS FOR ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 3-118: RECTANGULAR CONNECTORS - DETAIL SPECIFICATION FOR A 4 POLE + PE POWER CONNECTOR WITH PUSH-PULL COUPLING
CEI EN 61076-3-118 : 2011 CONNECTORS FOR ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 3-118: RECTANGULAR CONNECTORS - DETAIL SPECIFICATION FOR A 4 POLE + PE POWER CONNECTOR WITH PUSH-PULL COUPLING
02/208126 DC : DRAFT SEP 2002 IEC 60849 ED.3 - SOUND SYSTEMS FOR EMERGENCY PURPOSES
BS EN 50131-10:2014 Alarm systems. Intrusion and hold-up systems Application specific requirements for Supervised Premises Transceiver (SPT)
CEI EN 60115-8-1 : 2016 FIXED RESISTORS FOR USE IN ELECTRONIC EQUIPMENT - PART 8-1: BLANK DETAIL SPECIFICATION: FIXED SURFACE MOUNT (SMD) LOW POWER FILM RESISTORS FOR GENERAL ELECTRONIC EQUIPMENT, CLASSIFICATION LEVEL G
BS EN 54-22:2015 Fire detection and fire alarm systems Resettable line-type heat detectors
BS EN 62790:2015 Junction boxes for photovoltaic modules. Safety requirements and tests
BS EN 61189-1:1997 Test methods for electrical materials, printed boards and other interconnection structures and assemblies General test methods and methodology
10/30236514 DC : 0 BS EN 60440 - METHOD OF MEASUREMENT OF NON-LINEARITY IN RESISTORS
09/30214460 DC : 0 BS EN 50548 - JUNCTION BOXES FOR PHOTOVOLTAIC MODULES
14/30311685 DC : 0 BS EN 61169-58 ED 1.0 - RADIO-FREQUENCY CONNECTORS - PART 58: SECTIONAL SPECIFICATION FOR RF COAXIAL CONNECTORS WITH BLIND-MATE COUPLING - CHARACTERISTIC IMPEDANCE 50 OHM (TYPE SBMA)
DIN CEN ISO/TS 14907-1;DIN SPEC 91192:2015-12 ELECTRONIC FEE COLLECTION - TEST PROCEDURES FOR USER AND FIXED EQUIPMENT - PART 1: DESCRIPTION OF TEST PROCEDURES (ISO/TS 14907-1:2015)
BS EN ISO 4064-2:2017 Water meters for cold potable water and hot water Test methods
BS EN 61000-5-7:2001 Electromagnetic compatibility (EMC). Installation and mitigation guidelines Installation and mitigation guidelines. Degrees of protection by enclosures against electromagnetic disturbances (EM code) - Degrees of protection against electromagnetic disturbances provided by enclosures (EM code)
EN 196110 : 2002 SECTIONAL SPECIFICATION - ROTARY SWITCHES - CAPABILITY APPROVAL
BS ISO 8568:2007 Mechanical shock. Testing machines. Characteristics and performance
CEI EN 61112 : 2010 LIVE WORKING - ELECTRICAL INSULATING BLANKETS
BS EN 60393-1:2009 Potentiometers for use in electronic equipment Generic specification
BS EN 60603-7-1:2011 Connectors for electronic equipment Detail specification for 8-way, shielded, free and fixed connectors
11/30252930 DC : 0 BS EN 60747-5-7 - SEMICONDUCTOR DEVICES - DISCRETE DEVICES - PART 5-7: PHOTODIODES AND PHOTOTRANSISTORS
10/30216541 DC : 0 BS EN 60068-2-55 - ENVIRONMENTAL TESTING - PART 2-55: TESTS - TEST EE AND GUIDANCE: LOOSE CARGO TESTING INCLUDING BOUNCE
BS EN 60068-2-62:1996 Environmental testing. Test methods Test Ef. Impact, pendulum hammer
BS EN 60068-2-41:2000 Environmental testing. Test methods Tests. Test Z/BM: Combined dry heat/low air pressure tests
PD IEC/TR 61189-3-914:2017 Test methods for electrical materials, printed boards and other interconnection structures and assemblies Test method for thermal conductivity of printed circuit boards for high-brightness LEDs. Guidelines
97/231700 DC : DRAFT DEC 1997 IEC 60115-1 - FIXED RESISTORS FOR USE IN ELECTRONIC EQUIPMENT - PART 1: GENERIC SPECIFICATION
BS EN 61076-4-110:2002 Connectors with assessed quality, for use in d.c., low-frequency analogue and in digital high speed data applications. Printed board connectors Detail specification for latched cable connector system having a basic grid of 2,0 mm including full shielding and latching function
13/30277366 DC : 0 BS EN 61169-49 ED 1.0 - RADIO-FREQUENCY CONNECTORS - PART 49: SECTIONAL SPECIFICATION FOR SMAA SERIES R.F CONNECTORS
11/30205538 DC : 0 BS EN 54-5 - FIRE DETECTION AND FIRE ALARM SYSTEMS - PART 5: HEAT DETECTORS - POINT DETECTORS
13/30280588 DC : 0 BS ISO 7240-28 - FIRE DETECTION AND ALARM SYSTEMS - PART 28: FIRE PROTECTION CONTROL EQUIPMENT
BS EN 140000:1995 Harmonized system of quality assessment for electronic components. Generic specification: fixed resistors
10/30218017 DC : 0 BS ISO 7240-11 - FIRE DETECTION AND ALARM SYSTEMS - PART 11: MANUAL CALL POINTS
06/30153438 DC : DRAFT JULY 2006 BS IEC 60539-1 ED.2 - DIRECTLY HEATED NEGATIVE TEMPERATURE COEFFICIENT THERMISTORES - PART 1: GENERIC SPECIFICATION
BS EN 61000-4-25 : 2002 ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-25: TESTING AND MEASUREMENT TECHNIQUES - HEMP IMMUNITY TEST METHODS FOR EQUIPMENT AND SYSTEMS
13/30289547 DC : 0 BS EN 60384-18 - FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 18: SECTIONAL SPECIFICATION - FIXED ALUMINIUM ELECTROLYTIC SURFACE MOUNT CAPACITORS WITH SOLID (MNO2) AND NON-SOLID ELECTROLYTE
BS EN 60107-1:1997 Methods of measurement on receivers for television broadcast transmission General considerations. Measurements on displays at radio and video frequencies
UNE-EN 61481-1:2015 Live working - Phase comparators - Part 1: Capacitive type to be used for voltages exceeding 1 kV a.c.
CEI EN 62197-1 : 2007 CONNECTORS FOR ELECTRONIC EQUIPMENT - QUALITY ASSESSMENT REQUIREMENTS - PART 1: GENERIC SPECIFICATION
UNE-EN 62718:2016 Railway applications - Rolling stock - DC supplied electronic ballasts for lighting fluorescent lamps
UNE-EN 62586-1:2014 Power quality measurement in power supply systems - Part 1: Power quality instruments (PQI)
13/30289551 DC : 0 BS EN 60384-3 - FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 3: SECTIONAL SPECIFICATION: SURFACE MOUNT FIXED TANTALUM ELECTROLYT CAPACITORS WITH MANGANESE DIOXIDE SOLID ELECTROLYTE
DD CLC/TS 50131-2-5:2004 Alarm systems. Intrusion systems Requirements for combined passive infrared and ultrasonic detectors
BS EN 62137-1-2:2007 Surface mounting technology. Environmental and endurance test methods for surface mount solder joint Shear strength test
BS EN 60384-25:2015 Fixed capacitors for use in electronic equipment Sectional specification. Surface mount fixed aluminium electrolytic capacitors with conductive polymer solid electrolyte
I.S. EN 61000-4-12:2017 ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-12: TESTING AND MEASUREMENT TECHNIQUES - RING WAVE IMMUNITY TEST
CSA CEI/IEC 61000.4.14 : 2001 ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-14: TESTING AND MEASUREMENT TECHNIQUES - VOLTAGE FLUCTUATION IMMUNITY TEST FOR EQUIPMENT WITH INPUT CURRENT NOT EXCEEDING 16 A PER PHASE
BS EN 170100:2001 Harmonized system of quality assessment for electronic components. Sectional specification: Waveguide type dielectric resonators
BS EN 62496-2-4:2013 Optical circuit boards. Basic test and measurement procedures Optical transmission test for optical circuit boards without input/output fibres
17/30344202 DC : 0 BS EN 61300-2-46 - FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - BASIC TEST AND MEASUREMENT PROCEDURES - PART 2-46: TESTS - DAMP HEAT, CYCLIC
BS EN 62246-1:2015 Reed switches Generic specification
02/206657 DC : 0 IEC 61189-5. ED. 1 - TEST METHODS FOR ELECTRICAL MATERIALS, INTERCONNECTION STRUCTURES AND ASSEMBLIES - PART 5: TEST METHODS FOR PRINTED BOARD ASSEMBLIES
BS EN 60835-1-1:1994 Methods of measurement for equipment used in digital microwave radio transmission systems. Measurements common to terrestrial radio-relay systems and satellite earth stations General
11/30252972 DC : 0 BS EN 61747-10-1 - LIQUID CRYSTAL DISPLAY DEVICES - PART 10-1: ENVIRONMENTAL, ENDURANCE AND MECHANICAL TEST METHODS - MECHANICAL
96/204185 DC : DRAFT APR 1996 PREN 131900 - SECTIONAL SPECIFICATION - FIXED CAPACITORS WITH METALLIZED ELECTRODES AND POLYPROPYLENE FILM DIELECTRIC FOR A.C. AND PULSE
10/30219053 DC : 0 BS EN 50130-4 - ALARM SYSTEMS - PART 4: ELECTROMAGNETIC COMPATIBILITY - PRODUCT FAMILY STANDARD - IMMUNITY REQUIREMENTS FOR COMPONENTS OF FIRE, INTRUDER AND SOCIAL ALARM SYSTEMS
NF EN 60068 5-2 : 2000 ENVIRONMENTAL TESTING - PART 5: GUIDE TO DRAFTING OF TEST METHODS - TERMS AND DEFINITIONS
BS IEC 61189-5-3 : 2015 TEST METHODS FOR ELECTRICAL MATERIALS, PRINTED BOARDS AND OTHER INTERCONNECTION STRUCTURES AND ASSEMBLIES - PART 5-3: GENERAL TEST METHODS FOR MATERIALS AND ASSEMBLIES - SOLDERING PASTE FOR PRINTED BOARD ASSEMBLIES
NF EN 61076-3-117 : 2009 CONNECTORS FOR ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 3-117: RECTANGULAR CONNECTORS - DETAIL SPECIFICATION FOR PROTECTIVE HOUSINGS FOR USE WITH 8-WAY SHIELDED AND UNSHIELDED CONNECTORS FOR INDUSTRIAL ENVIRONMENTS INCORPORATING THE IEC 60603-7 SERIES INTERFACE - VARIANT 14 RELATED TO IEC 61076-3-106 - PUSH PULL COUPLING
BS EN 61747-10-1:2013 Liquid crystal display devices Environmental, endurance and mechanical test methods. Mechanical
13/30279156 DC : 0 BS EN 6101-2-012 ED.1 - SAFETY REQUIREMENTS FOR ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL, AND LABORATORY USE - PART 2-012: PARTICULAR REQUIREMENTS FOR CLIMATIC AND ENVIRONMENTAL TESTING AND OTHER TEMPERATURE CONDITIONING EQUIPMENT
BS IEC 61988-4-1:2015 Plasma display panels Environmental testing methods. Climatic and mechanical
UNI CEI EN ISO 4064-2 : 2014 WATER METERS FOR COLD POTABLE WATER AND HOT WATER - PART 2: TEST METHODS
ISO 7240-2:2017 Fire detection and alarm systems — Part 2: Fire detection control and indicating equipment
NF EN 60068 2-7 : 1994 BASIC ENVIRONMENTAL TESTING PROCEDURES - PART 2: TESTS - TEST GA AND GUIDANCE: ACCELERATION, STEADY STATE
NF EN 60068-2-83 : 2012 ENVIRONMENTAL TESTING - PART 2-83: TESTS - TEST TF: SOLDERABILITY TESTING OF ELECTRONIC COMPONENTS FOR SURFACE MOUNTING DEVICES (SMD) BY THE WETTING BALANCE METHOD USING SOLDER PASTE
ISO 16437:2012 Ships and marine technology - Lifesaving and fire protection — Atmospheric oil mist detectors for ships
EN 61196-10:2016/AC:2016-02 COAXIAL COMMUNICATION CABLES - PART 10: SECTIONAL SPECIFICATION FOR SEMI-RIGID CABLES WITH POLYTETRAFLUOROETHYLENE (PTFE) DIELECTRIC
IEC 60261:1989 Sealing test for pressurized waveguide tubing and assemblies
BS EN 61811-53:2002 Electromechanical all-or-nothing relays Blank detail specification. Electromechanical all-or-nothing telecom relays of assessed quality. Two change-over contacts, 14 mm x 9 mm base
UNI EN 16280 : 2013 BREATH ALCOHOL TEST DEVICES FOR GENERAL PUBLIC - REQUIREMENTS AND TEST METHODS
DD CLC/TS 50131-2-7-2:2009 Alarm systems. Intrusion and hold-up systems Intrusion detectors. Glass break detectors (passive)
NF EN 60068 2-13 : 1999 ENVIRONMENTAL TESTING - PART 2: TESTS - TEST M: LOW AIR PRESSURE
I.S. EN 60143-2:2013 SERIES CAPACITORS FOR POWER SYSTEMS - PART 2: PROTECTIVE EQUIPMENT FOR SERIES CAPACITOR BANKS (IEC 60143-2:2012 (EQV))
BS EN 16280:2012 Breath alcohol test devices for general public. Requirements and test methods
I.S. EN 50131-2-7-2:2012 ALARM SYSTEMS - INTRUSION AND HOLD-UP SYSTEMS - PART 2-7-2: INTRUSION DETECTORS - GLASS BREAK DETECTORS (PASSIVE)
BS EN 61112:2009 Live working. Electrical insulating blankets
BS EN 60268-7:2011 Sound system equipment Headphones and earphones
05/30138532 DC : DRAFT SEP 2005 IEC 60512-26-2 - CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 26-2: TESTS 26A, 26B, 26C, 26D, 26E AND 26F - CONNECTOR MEASUREMENTS UP TO 250 MHZ
05/30132097 DC : DRAFT JUNE 2005 IEC 60679-1 ED 3 - QUARTZ CRYSTAL CONTROLLED OSCILLATORS OF ASSESSED QUALITY - PART 1: GENERIC SPECIFICATION
CEI 56-22 : 2000 EQUIPMENT RELIABILITY TESTING - PART 3: PREFERRED TEST CONDITIONS - SECTION 6: TEST CYCLE 6: OUTDOOR TRANSPORTABLE EQUIPMENT - LOW DEGREE OF SIMULATION
EN 60939-3:2015/AC:2016-04 PASSIVE FILTER UNITS FOR ELECTROMAGNETIC INTERFERENCE SUPPRESSION - PART 3: PASSIVE FILTER UNITS FOR WHICH SAFETY TESTS ARE APPROPRIATE (IEC 60939-3:2015/COR1:2016)
04/30111859 DC : 0 IEC 62271-1 - HIGH-VOLTAGE SWITCHGEAR AND CONTROL GEAR - PART 1: COMMON SPECIFICATIONS
BS EN 60068-2-43:2003 Environmental testing. Test methods Test Kd. Hydrogen sulphide test for contacts and connections
I.S. EN 61337-2:2004 FILTERS USING WAVEGUIDE TYPE DIELECTRIC RESONATORS - PART 2: GUIDANCE FOR USE
BS EN 61076-3:2008 Connectors for electronic equipment. Product requirements Rectangular connectors. Sectional specification
CEI EN 60440 : 2013 METHOD OF MEASUREMENT OF NON-LINEARITY IN RESISTORS
CEI EN 62576 : 2011 ELECTRIC DOUBLE-LAYER CAPACITORS FOR USE IN HYBRID ELECTRIC VEHICLES - TEST METHODS FOR ELECTRICAL CHARACTERISTICS
BS EN 61007:1997 Transformers and inductors for use in electronic and telecommunication equipment. Measuring methods and test procedures
CEI EN 61076-4-114 : 2004 CONNECTORS FOR ELECTRONIC EQUIPMENT PART 4-114: PRINTED BOARD CONNECTORS - DETAIL SPECIFICATION FOR TWO-PART CONNECTOR WITH INTEGRATED SHIELDING FUNCTION HAVING A GRID OF 1 MM X 1,5 MM
CEI EN 60384-15 : 1ED 2017 FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 15: SECTIONAL SPECIFICATION: FIXED TANTALUM CAPACITORS WITH NON-SOLID OR SOLID ELECTROLYTE
CEI EN 60793-1-61 : 1ED 2017 OPTICAL FIBRES - PART 1-61: MEASUREMENT METHODS AND TEST PROCEDURES - POLARIZATION CROSSTALK
03/320275 DC : DRAFT DEC 2003 IEC 61196-6 ED.1 - COAXIAL COMMUNICATION CABLES - PART 6: SECTIONAL SPECIFICATION FOR CATV DROP CABLES
BS EN 60068-2-54:2006 Environmental testing Tests - Test Ta: Solderability testing of electronic components by the wetting balance method
10/30235845 DC : 0 BS EN 61881-3 - RAILWAY APPLICATIONS - ROLLING STOCK EQUIPMENT - CAPACITOR FOR POWER ELECTRONICS - PART 3: ELECTRIC DOUBLE-LAYER CAPACITORS
EN IEC 60068-3-5:2018 Environmental testing - Part 3-5: Supporting documentation and guidance - Confirmation of the performance of temperature chambers
BS QC 960101:1992 Specification for harmonized system of quality assessment for electronic components. Blank detail specification: electromechanical switches for use in electronic equipment. Blank detail specification for rotary switches
UNI EN ISO 8230-1 : 2009 SAFETY REQUIREMENTS FOR DRY-CLEANING MACHINES - PART 1: COMMON SAFETY REQUIREMENTS
13/30287884 DC : 0 BS EN 61988-4-1 ED 1.0 - PLASMA DISPLAY PANELS - PART 4-1: ENVIRONMENTAL TESTING METHODS - CLIMATIC AND MECHANICAL
CEI EN 60384-3 : 2007 FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 3: SECTIONAL SPECIFICATION - SURFACE MOUNT FIXED TANTALUM ELECTROLYTIC CAPACITORS WITH SOLID (MNO[2]) ELECTROLYTE
BS EN 62025-2:2005 High frequency inductive components. Non-electrical characteristics and measuring methods Test methods for non-electrical characteristics
BS EN 61076-3-118:2010 Connectors for electronic equipment. Product requirements Rectangular connectors. Detail specification for a 4 pole + PE power connector with push-pull coupling
11/30244681 DC : 0 BS IEC 62706 - RADIATION PROTECTION INSTRUMENTATION - ENVIRONMENTAL, ELECTROMAGNETIC AND MECHANICAL PERFORMANCE REQUIREMENTS
15/30320603 DC : 0 BS EN 60068-2-52 - ENVIRONMENTAL TESTING - PART 2: TESTS - TEST KB: SALT MIST, CYCLIC (SODIUM, CHLORIDE SOLUTION)
BS CECC25200(1978) : 1978 AMD 7578 HARMONIZED SYSTEM OF QUALITY ASSESSMENT FOR ELECTRONIC COMPONENTS : SECTIONAL SPECIFICATION : MAGNETIC OXIDE CORES FOR LINEAR TRANSFORMERS
BS EN 61076-2:2011 Connectors for electronic equipment. Product requirements Sectional specification for circular connectors
NF EN 60664-1 : 2007 INSULATION COORDINATION FOR EQUIPMENT WITHIN LOW-VOLTAGE SYSTEMS - PART 1: PRINCIPLES, REQUIREMENTS AND TESTS
BS EN 60068-2-80:2005 Environmental testing Tests - Test Fi: Vibration. Mixed mode
I.S. EN 1987-3:1998 ELECTRICALLY PROPELLED ROAD VEHICLES - SPECIFIC REQUIREMENTS FOR SAFETY - PART 3: PROTECTION OF USERS AGAINST ELECTRICAL HAZARDS
BS EN 61169-1:2013 Radio-frequency connectors Generic specification. General requirements and measuring methods
11/30254162 DC : 0 BS EN 45501 - METROLOGICAL ASPECTS OF NON-AUTOMATIC WEIGHING INSTRUMENTS
09/30209389 DC : 0 BS EN 60115-8-1 - FIXED RESISTORS FOR USE IN ELECTRONIC EQUIPMENT - PART 8-1: BLANK DETAIL SPECIFICATION - FIXED CHIP RESISTORS - ASSESSMENT LEVEL E
CEI EN 60368-1 : 2006 PIEZOELECTRIC FILTERS OF ASSESSED QUALITY - PART 1: GENERIC SPECIFICATION
00/203602 DC : DRAFT AUG 2000 IEC 60512-23-7 - ELECTROMECHANICAL COMPONENTS FOR ELECTRONIC EQUIPMENT - BASIC TESTING PROCEDURES AND MEASURING METHODS - PART 23-7: SCREENING AND FILTERING TESTS - TEST 23G: MEASUREMENT OF EFFECTIVE TRANSFER IMPEDANCE OF CONNECTORS
BS EN 61300-2-9:2017 Fibre optic interconnecting devices and passive components. Basic test and measurement procedures Tests. Shock
I.S. EN 61076-2-102:2002 CONNECTORS FOR ELECTRONIC EQUIPMENT - PART 2-102: CIRCULAR CONNECTORS WITH ASSESSED QUALITY - DETAIL SPECIFICATION FOR PLUGS AND JACKS FOR EXTERNAL LOW VOLTAGE POWER SUPPLY
12/30254902 DC : DRAFT JAN 2012 BS EN 54-10 - FIRE DETECTION AND FIRE ALARM SYSTEMS - PART 10: FLAME DETECTORS - POINT DETECTORS
13/30277837 DC : 0 BS EN 62817 ED 1.0 - SOLAR TRACKERS FOR PHOTOVOLTAIC SYSTEMS - DESIGN QUALIFICATION
PD IEC/TS 62257-3:2015 Recommendations for renewable energy and hybrid systems for rural electrification Project development and management
17/30355844 DC : DRAFT JUL 2017 BS EN 60384-21 - FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 21: SECTIONAL SPECIFICATION - FIXED SURFACE MOUNT MULTILAYER CAPACITORS OF CERAMIC DIELECTRIC, CLASS 1
BS EN 61603-1:1997 Transmission of audio and/or video and related signals using infra-red radiation General
CSA C61215 :2008 CRYSTALLINE SILICON TERRESTRIAL PHOTOVOLTAIC (PV) MODULES - DESIGN QUALIFICATION AND TYPE APPROVAL
CEI EN 61076-4-108 : 2003 CONNECTORS FOR ELECTRONIC EQUIPMENT PART 4-108: PRINTED BOARD CONNECTORS WITH ASSESSED QUALITY DETAIL SPECIFICATION FOR CABLE-TO-BOARD CONNECTORS, WITH A MODULAR PITCH OF 25 MM AND INTEGRATED SHIELDING FUNCTION, APPLICABLE FOR TRANSVERSE PACKING DENSITY OF 15 MM, HAVING A BASIC GRID OF 2,5 MM IN ACCORDANCE WITH IEC 60917-1
DD CLC/TS 50467:2008 Railway applications. Rolling stock. Electrical connectors, requirements and test methods
BS EN 62137-1-1:2007 Surface mounting technology. Environmental and endurance test methods for surface mount solder joint Pull strength test
BS EN 61760-1:2006 Surface mounting technology Standard method for the specification of surface mounting components (SMDs)
BS EN 61000-4-20:2003 Electromagnetic Compatibility (EMC) Testing and measurement techniques. Emission and immunity testing in transverse electromagnetic (TEM) waveguides
CEI EN 61753-1 : 2009 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS PERFORMANCE STANDARD - PART 1: GENERAL AND GUIDANCE FOR PERFORMANCE STANDARDS
BS EN 61338-1:2005 Waveguide type dielectric resonators Generic specification
BS EN 61076-4-113:2003 Connectors for electronic equipment Printed board connectors with assessed quality Detail specification for two-part connectors having 5 rows with a grid of 2,54 mm for printed boards and backplanes in bus applications
BS EN 61071-2:1996 Power electronic capacitors Requirements for disconnecting test on fuses, destruction test, self healing test and endurance test
03/100530 DC : DRAFT JUNE 2003 IEC 61076-3 ED 2 - CONNECTORS FOR ELECTRONIC EQUIPMENT - PART 3: RECTANGULAR CONNECTORS - SECTIONAL SPECIFICATION
I.S. EN 60839-11-1:2013 ALARM AND ELECTRONIC SECURITY SYSTEMS - PART 11-1: ELECTRONIC ACCESS CONTROL SYSTEMS - SYSTEM AND COMPONENTS REQUIREMENTS
CEI EN 61076-3-115 : 2012 CONNECTORS FOR ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 3-115: RECTANGULAR CONNECTORS - DETAIL SPECIFICATION FOR PROTECTIVE HOUSINGS FOR USE WITH 8-WAY SHIELDED AND UNSHIELDED CONNECTORS FOR FREQUENCIES UP TO 600 MHZ FOR INDUSTRIAL ENVIRONMENTS INCORPORATING THE IEC 60603-7 SERIES INTERFACE - VARIANT 12 RELATED TO IEC 61076-3-106 - PUSH-PULL TYPE
I.S. EN 60115-2:2015 FIXED RESISTORS FOR USE IN ELECTRONIC EQUIPMENT - PART 2: SECTIONAL SPECIFICATION: LEADED FIXED LOW POWER FILM RESISTORS
CEI EN 60352-8 : 2012 SOLDERLESS CONNECTIONS - PART 8: COMPRESSION MOUNT CONNECTIONS - GENERAL REQUIREMENTS, TEST METHODS AND PRACTICAL GUIDANCE
CEI EN 50131-2-7-1 : 2013 ALARM SYSTEMS - INTRUSION AND HOLD-UP SYSTEMS - PART 2-7-1: INTRUSION DETECTORS - GLASS BREAK DETECTORS (ACOUSTIC)
09/30204447 DC : 0 BS EN 60352-5 - SOLDERLESS CONNECTIONS - PART 5: PRESS-IN CONNECTIONS - GENERAL REQUIREMENTS, TEST METHODS AND PRACTICAL GUIDANCE
11/30255443 DC : 0 BS EN 60068-2-39 - ENVIRONMENTAL TESTING - PART 2-39: TESTS AND GUIDANCE: COMBINED TEMPERATURE OR TEMPERATURE AND HUMIDITY WITH LOW AIR PRESSURE TESTS
09/30214329 DC : 0 BS EN 60384-21 - FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 21: SECTIONAL SPECIFICATION: FIXED SURFACE MOUNT MULTILAYER CAPACITORS OF CERAMIC DIELECTRIC, CLASS 1
00/706017 DC : DRAFT MAR 2000 BS ISO 15763 - ROAD VEHICLES - ALARM SYSTEMS FOR COMMERCIAL VEHICLES
BS EN 120000:1996 Harmonized system of quality assessment for electronic components. General specification: semiconductor optoelectronic and liquid crystal devices
BS EN 60068-2-40:2000 Environmental testing. Test methods Test Z/AM. Combined cold/low air pressure tests
BS EN 62576:2010 Electric double-layer capacitors for use in hybrid electric vehicles. Test methods for electrical characteristics
CSA C22.2 No. 61010-2-012 : 2017 SAFETY REQUIREMENTS FOR ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL AND LABORATORY USE - PART 2-012: PARTICULAR REQUIREMENTS FOR CLIMATIC AND ENVIRONMENTAL TESTING AND OTHER TEMPERATURE CONDITIONING EQUIPMENT
EN 60529:1991/AC:2016-12 DEGREES OF PROTECTION PROVIDED BY ENCLOSURES (IP CODE) (IEC 60529 EDITION 2.2 CORRIGENDUM 2:2015)
07/30161553 DC : 0 BS EN 60758 - SYNTHETIC QUARTZ CRYSTAL - SPECIFICATIONS AND GUIDE TO THE USE
UNI EN 54-24 : 2008 FIRE DETECTION AND FIRE ALARM SYSTEMS - PART 24: COMPONENTS OF VOICE ALARM SYSTEMS - LOUDSPEAKERS
BIS IS/IEC 60862-1 : 2003 SURFACE ACOUSTIC WAVE (SAW) FILTERS OF ASSESSED QUALITY - PART 1: GENERIC SPECIFICATION
BS EN 61811-55:2002 Electromechanical non-specified time all-or-nothing relays of assessed quality Blank detail specification. Electromechanical all-or-nothing telecom relays of assessed quality. Two change-over contacts, 11 mm x 7,5 mm (max.) base
BS EN 175301-801:2006 Detail specification. High density rectangular connectors, round removable crimp contacts
05/30138536 DC : DRAFT SEP 2005 IEC 60512-26-3 - CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 26-3: TEST ARRANGEMENT UP TO 250 MHZ ASSOCIATED WITH TESTS 26A TO 26F
BS EN 62391-2:2006 Fixed electric double-layer capacitors for use in electronic equipment Sectional specification. Electric double-layer capacitors for power application
13/30280854 DC : 0 BS EN 60384-8 - FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 8: SECTIONAL SPECIFICATION: FIXED CAPACITORS OF CERAMIC DIELECTRIC, CLASS 1
15/30332712 DC : 0 BS EN 61076-3-123 - CONNECTORS FOR ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 3-123: RECTANGULAR CONNECTORS - DETAIL SPECIFICATION FOR HYBRID CONNECTORS FOR INDUSTRIAL ENVIRONMENTS, FOR POWER SUPPLY AND FIBRE OPTIC DATA TRANSMISSION, WITH PUSH-PULL LOCKING
08/30189288 DC : DRAFT SEP 2008 BS EN 61076-2-107 - CONNECTORS FOR ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 2-107: DETAIL SPECIFICATION FOR CIRCULAR HYBRID CONNECTORS M12 WITH ELECTRICAL AND FIBRE-OPTIC CONTACTS WITH SCREW LOCKING
NF EN 60068 2-32 : 1994 BASIC ENVIRONMENTAL TESTING PROCEDURES - PART 2: TESTS - TEST ED: FREE FALL
BS EN 61076-3-120:2016 Connectors for electronic equipment. Product requirements Rectangular connectors. Detail specification for rewirable power connectors with snap locking for rated voltage of 250 V d.c. and rated current of 30 A
UNE-EN 61196-10:2016 Coaxial communication cables - Part 10: Sectional specification for semi-rigid cables with polytetrafluoroethylene (PTFE) dielectric
BS EN 62813:2015 Lithium ion capacitors for use in electric and electronic equipment. Test methods for electrical characteristics
BS 2011-5.2:1992 Environmental testing. Guide to drafting of test methods Terms and definitions
IEC 62974-1:2017 Monitoring and measuring systems used for data collection, gathering and analysis - Part 1: Device requirements
BS EN 60512-16-21:2012 Connectors for electronic equipment. Tests and measurements Mechanical tests on contacts and terminations. Test 16u. Whisker test via the application of external mechanical stresses
10/30234803 DC : 0 BS EN 61169-1 ED.2 - RADIO FREQUENCY CONNECTORS - PART 1: GENERIC SPECIFICATION - GENERAL REQUIREMENTS AND MEASURING METHODS
DIN EN 54-26 E : 2015 FIRE DETECTION AND FIRE ALARM SYSTEMS - PART 26: CARBON MONOXIDE DETECTORS - POINT DETECTORS
BS EN 60384-6:2005 Fixed capacitors for use in electronic equipment Sectional specification. Fixed metallized polycarbonate film dielectric d.c. capacitors
BS EN 60352-7:2002 Solderless connections Spring clamp connections. General requirements, test methods and practical guidance
BS EN 168000:1996 Harmonized system of quality assessment for electronic components. Generic specification: quartz crystal units
I.S. EN 61191-6:2010 PRINTED BOARD ASSEMBLIES - PART 6: EVALUATION CRITERIA FOR VOIDS IN SOLDERED JOINTS OF BGA AND LGA AND MEASUREMENT METHOD
I.S. EN 138000:1998 FIXED INDUCTORS FOR ELECTROMAGNETIC INTERFERENCE SUPPRESSION (INDUCTORS FOR WHICH SAFETY TESTS ARE REQUIRED) (GENERIC SPECIFICATION)
CEI EN 60728-13 : 2010 CABLE NETWORKS FOR TELEVISION SIGNALS, SOUND SIGNALS AND INTERACTIVE SERVICES - PART 13: OPTICAL SYSTEMS FOR BROADCAST SIGNAL TRANSMISSIONS
CEI EN 62333-3 : 2011 NOISE SUPPRESSION SHEET FOR DIGITAL DEVICES AND EQUIPMENT - PART 3: CHARACTERIZATION OF PARAMETERS OF NOISE SUPPRESSION SHEET
BS EN 60512-23-7:2005 Connectors for electronic equipment. Tests and measurements Screening and filtering tests. Test 23g. Effective transfer impedance of connectors
CEI EN 61587-1 : 2012 MECHANICAL STRUCTURES FOR ELECTRONIC EQUIPMENT - TESTS FOR IEC 60917 AND IEC 60297 SERIES - PART 1: ENVIRONMENTAL REQUIREMENTS, TEST SET-UP AND SAFETY ASPECTS FOR CABINETS, RACKS, SUBRACKS AND CHASSIS UNDER INDOOR CONDITION USE AND TRANSPORTATION
CSA IEC 61000-4-12 : 2013 ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-12: TESTING AND MEASUREMENT TECHNIQUES - RING WAVE IMMUNITY TEST
11/30243827 DC : 0 BS ISO 16437 - SHIPS AND MARINE TECHNOLOGY - LIFESAVING AND FIRE PROTECTION - ATMOSPHERIC OIL MIST DETECTORS
EN 62974-1:2017 Monitoring and measuring systems used for data collection, gathering and analysis - Part 1: Device requirements
BS CECC23100(1989) : 1989 AMD 7358 HARMONIZED SYSTEM OF QUALITY ASSESSMENT FOR ELECTRONIC COMPONENTS: SECTIONAL SPECIFICATION: SINGLE AND DOUBLE SIDED PRINTED BOARDS WITH PLAIN HOLES
BS EN 54-7:2001 Fire detection and fire alarm systems Smoke detectors. Point detectors using scattered light, transmitted light or ionization
CEI EN 62024-2 : 2009 HIGH FREQUENCY INDUCTIVE COMPONENTS - ELECTRICAL CHARACTERISTICS AND MEASURING METHODS - PART 2: RATED CURRENT OF INDUCTORS FOR DC TO DC CONVERTERS
CEI EN 60107-1 : 1998 METHODS OF MEASUREMENT ON RECEIVERS FOR TELEVISION BROADCAST TRANSMISSIONS - PART 1: GENERAL CONSIDERATIONS - MEASUREMENTS AT RADIO AND VIDEO FREQUENCIES
15/30319425 DC : 0 BS EN 61076-3-121 - ELECTRICAL CONNECTORS - PART 3-121: RECTANGULAR CONNECTORS - DETAIL SPECIFICATION FOR 8-WAY, UNSHIELDED, FREE AND FIXED HIGH DENSITY CONNECTORS FOR DATA TRANSFER AND WITH POWER OVER ETHERNET CAPABILITIES
BS EN 61076-2-109:2014 Connectors for electronic equipment. Product requirements Circular connectors. Detail specification for connectors with M 12 × 1 screw-locking, for data transmission frequencies up to 500 MHz
I.S. EN 62576:2010 ELECTRIC DOUBLE-LAYER CAPACITORS FOR USE IN HYBRID ELECTRIC VEHICLES - TEST METHODS FOR ELECTRICAL CHARACTERISTICS
BS EN 60068-2-42:2003 Environmental testing. Test methods Test Kc. Sulphur dioxide test for contacts and connections
08/30193478 DC : DRAFT NOV 2008 BS EN 61508-7 - FUNCTIONAL SAFETY OF ELECTRICAL/ELECTRONIC/PROGRAMMABLE ELECTRONIC SAFETY-RELATED SYSTEMS - PART 7: OVERVIEW OF TECHNIQUES AND MEASURES
14/30317306 DC : 0 BS EN 60115-8-1:2014+A1 - FIXED RESISTORS FOR USE IN ELECTRONIC EQUIPMENT - PART 8-1: BLANK DETAIL SPECIFICATION: FIXED SURFACE MOUNT (SMD) LOW POWER FILM RESISTORS FOR GENERAL ELECTRONIC EQUIPMENT, CLASSIFICATION LEVEL G
BS EN 61076-4-105:1998 Connectors with assessed quality, for use in d.c., low-frequency analogue and in digital high speed data applications. Printed board connectors Detail specification for 9 mm circular connector with 3 to 8 contacts for use in a wide range of applications including the telecommunication and audio industry
BS EN 60368-1:2000 Piezoelectric filters Generic specification
CSA E60127.6 : 2003 : R2012 MINIATURE FUSES - PART 6: FUSE-HOLDERS FOR MINIATURE CARTRIDGE FUSE-LINKS
BS EN 60143-2:2013 Series capacitors for power systems Protective equipment for series capacitor banks
96/201315 DC : DRAFT JAN 1996 EN 160300 - PROPOSAL FOR A SECTIONAL SPECIFICATION FOR POWER CONVERSION UNITS OF ASSESSED QUALITY FOR CAPABILITY APPROVAL AS MODULAR ELECTRONIC UNITS
CEI EN 62884-1 : 1ED 2018 MEASUREMENT TECHNIQUES OF PIEZOELECTRIC, DIELECTRIC AND ELECTROSTATIC OSCILLATORS - PART 1: BASIC METHODS FOR THE MEASUREMENT
BS EN 60947-5-4:2003 Specification for low-voltage switchgear and controlgear. Control circuit devices and switching elements Method of assessing the performance of low-energy contacts. Special tests
11/30240406 DC : 0 BS ISO 7240-5 - FIRE DETECTION AND ALARM SYSTEMS - PART 5: POINT-TYPE HEAT DETECTORS
98/230855 DC : DRAFT APRIL 1998 IEC 61076-4-112 - CONNECTORS WITH ASSESSED QUALITY, FOR USE IN D.C, LOW-FREQUENCY ANALOGUE AND IN DIGITAL HIGH-SPEED DATA APPLICATIONS - PART 4: PRINTED BOARD CONNECTORS - SECTION 112 - DETAIL SPECIFICATION FOR TWO-PART CONNECTORS FOR PRINTED BOARDS FOR BASIC GRID OF 2,00 MM, WITH SQUARE MALE CONTACTS OF 0,50 X 0,50 MM
BS EN 60512-9-3:2011 Connectors for electronic equipment. Tests and measurements Endurance tests. Test 9c. Mechanical operation (engaging/separating) with electrical load
BS EN 60939-2:2005 Passive filter units for electromagnetic interference suppression Sectional specification: passive filter units for which safety tests are appropriate. Test methods and general requirements
IEC 61000-6-6:2003 Electromagnetic compatibility (EMC) - Part 6-6: Generic standards - HEMP immunity for indoor equipment
BS EN 54-30:2015 Fire detection and fire alarm systems Multi-sensor fire detectors. Point detectors using a combination of carbon monoxide and heat sensors
UNE-EN 61000-4-16:2016 Electromagnetic compatibility (EMC) - Part 4-16: Testing and measurement techniques - Test for immunity to conducted, common mode disturbances in the frequency range 0 Hz to 150 kHz
UNE-EN 61020-1:2011 Electromechanical switches for use in electrical and electronic equipment - Part 1: Generic specification
EN 62040-3:2011 Uninterruptible power systems (UPS) - Part 3: Method of specifying the performance and test requirements
CSA IEC 61646 : 2010 THIN-FILM TERRESTRIAL PHOTOVOLTAIC (PV) MODULES - DESIGN QUALIFICATION AND TYPE APPROVAL
UNI EN 15859 : 2010 AIR QUALITY - CERTIFICATION OF AUTOMATED DUST ARRESTMENT PLANT MONITORS FOR USE ON STATIONARY SOURCES - PERFORMANCE CRITERIA AND TEST PROCEDURES
BS EN 60068-2-30:2005 Environmental testing Tests. Test Db and guidance: Damp heat, cyclic (12 h + 12 h cycle)
CAN/CSA-IEC 61000-4-2:12 (R2017) Electromagnetic compatibility (EMC) - Part 4-2: Testing and measurement techniques - Electrostatic discharge immunity test (Adopted IEC 61000-4- 2:2008, second edition, 2008-12) | Compatibilité électromagnétique (CEM) - Partie 4-2: Techniques d\'essai et de mesure - Essai d\'immunité aux décharges électrostatiques (norme CEI 61000-4-2:2008 adoptée, deuxième édition, 2008-12)
I.S. EN 62604-1:2015 SURFACE ACOUSTIC WAVE (SAW) AND BULK ACOUSTIC WAVE (BAW) DUPLEXERS OF ASSESSED QUALITY - PART 1: GENERIC SPECIFICATION
IEC 62391-1:2015 RLV Fixed electric double-layer capacitors for use in electric and electronic equipment - Part 1: Generic specification
NF EN 62496-2-2 : 2011 OPTICAL CIRCUIT BOARDS - PART 2-2: MEASUREMENTS - DIMENSIONS OF OPTICAL CIRCUIT BOARDS
NF EN 60938-1 : 2008 AMD 1 2008 FIXED INDUCTORS FOR ELECTROMAGNETIC INTERFERENCE SUPPRESSION - PART 1: GENERIC SPECIFICATION
NF EN 60603-7-3 : DEC 2010 CONNECTORS FOR ELECTRONIC EQUIPMENT - PART 7-3: DETAIL SPECIFICATION FOR 8-WAY, SHIELDED, FREE AND FIXED CONNECTORS, FOR DATA TRANSMISSIONS WITH FREQUENCIES UP TO 100 MHZ
BS EN 60068-3-5:2002 Environmental testing. Guidance Confirmation of the performance of temperature chambers
BS EN 50136-2-1:1998 Alarm systems. Alarm transmission systems and equipment General requirements for alarm transmission equipment
IEC 61338-1-2:1998 Waveguide type dielectric resonators - Part 1-2: General information and test conditions - Test conditions
IEC 60068-2-70:1995 Environmental testing - Part 2-70: Tests - Test Xb: Abrasion of markings and letterings caused by rubbing of fingers and hands
IEC 61196-5:2018 Coaxial communication cables - Part 5: Sectional specification for CATV trunk and distribution cables
IEC 61965:2003 Mechanical safety of cathode ray tubes
IEC 62642-2-4:2010 Alarm systems - Intrusion and hold-up systems - Part 2-4: Intrusion detectors - Combined passive infrared / Microwave detectors
I.S. EN 62496-2-4:2013 OPTICAL CIRCUIT BOARDS - BASIC TEST AND MEASUREMENT PROCEDURES - PART 2-4: OPTICAL TRANSMISSION TEST FOR OPTICAL CIRCUIT BOARDS WITHOUT INPUT/OUTPUT FIBRES (IEC 62496-2-4:2013 (EQV))
CSA C22.2 No. 61730-2 :2011 PHOTOVOLTAIC (PV) MODULE SAFETY QUALIFICATION - PART 2: REQUIREMENTS FOR TESTING
CAN/CSA-IEC 61000-4-18:14 (R2018) Electromagnetic compatibility (EMC) - Part 4-18: Testing and measurement techniques - Damped oscillatory wave immunity test (Adopted IEC 61000-4-18:2011, edition 1:2006 consolidated with amendment 1:2010) | Compatibilité électromagnétique (CEM) - Partie 4-18 : Techniques d\'essai et de mesure - Essai d\'immunité à l\'onde oscillatoire amortie (norme CEI 61000-4-18:2011 adoptée, édition 1:2006 consolidée par l\'amendement 1:2010)
CEI EN 60143-2 : 2014 SERIES CAPACITORS FOR POWER SYSTEMS - PART 2: PROTECTIVE EQUIPMENT FOR SERIES CAPACITOR BANKS
CEI EN 61180 : 1ED 2017 HIGH-VOLTAGE TEST TECHNIQUES FOR LOW-VOLTAGE EQUIPMENT - DEFINITIONS, TEST AND PROCEDURE REQUIREMENTS, TEST EQUIPMENT
CSA C22.2 No. 61730-2 : 2011 : INC : AMD 1 : 2013 : R2016 PHOTOVOLTAIC (PV) MODULE SAFETY QUALIFICATION - PART 2: REQUIREMENTS FOR TESTING
EN IEC 61076-2-111:2018 Connectors for electrical and electronic equipment - Product requirements - Part 2-111: Circular connectors - Detail specification for power connectors with M12 screw-locking
ISO/TS 19880-1:2016 Gaseous hydrogen Fuelling stations Part 1: General requirements
BS 5760-13.6:1997 Reliability of systems, equipment and components. Guide to reliability test conditions for consumer equipment Outdoor transportable equipment. Low degree of simulation
PD ES 59008-2:1999 Data requirements for semiconductor die Vocabulary
NF EN 61076 4 101 : 2002 CONNECTORS FOR ELECTRONIC EQUIPMENT - PART 4-101: PRINTED BOARD CONNECTORS WITH ASSESSED QUALITY - DETAIL SPECIFICATION FOR TWO-PART CONNECTOR MODULES, HAVING A BASIC GRID OF 2,0 MM FOR PRINTED BOARDS AND BLACKPLANES IN ACCORDANCE WITH IEC 60917
NF EN 50131-4 : 2009 ALARM SYSTEMS - INTRUSION AND HOLD-UP SYSTEMS - PART 4: WARNING DEVICES
ISO 19453-4:2018 Road vehicles — Environmental conditions and testing for electrical and electronic equipment for drive system of electric propulsion vehicles — Part 4: Climatic loads
BS EN 167000:1993 Harmonized system of quality assessment for electronic components. Generic specification: piezoelectric filters
IEC 61020-2:1991 Electromechanical switches for use in electronic equipment - Part 2: Sectional specification for rotary switches
IEC 61760-4:2015 Surface mounting technology - Part 4: Classification, packaging, labelling and handling of moisture sensitive devices
I.S. EN 61189-5:2006 TEST METHODS FOR ELECTRICAL MATERIALS, INTERCONNECTION STRUCTURES AND ASSEMBLIES - PART 5: TEST METHODS FOR PRINTED BOARD ASSEMBLIES
BS EN 60384-8:2015 Fixed capacitors for use in electronic equipment Sectional specification: Fixed capacitors of ceramic dielectric, Class 1
I.S. EN 62341-6-1:2011 ORGANIC LIGHT EMITTING DIODE (OLED) DISPLAYS - PART 6-1: MEASURING METHODS OF OPTICAL AND ELECTRO-OPTICAL PARAMETERS
CEI EN 61076-2-001 : 2012 CONNECTORS FOR ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 2-001: CIRCULAR CONNECTORS - BLANK DETAIL SPECIFICATION
CEI EN 61300-2-9 : 2012 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - BASIC TEST AND MEASUREMENT PROCEDURES - PART 2-9: TESTS - SHOCK
BS EN 62040-3:2011 Uninterruptible power systems (UPS) Method of specifying the performance and test requirements
I.S. EN 50131-3:2009 ALARM SYSTEMS - INTRUSION AND HOLD-UP SYSTEMS - PART 3: CONTROL AND INDICATING EQUIPMENT
CEI EN 60107-7 : 1998 METHODS OF MEASUREMENT ON RECEIVERS FOR TELEVISION - PART 7: HDTV DISPLAYS
I.S. EN 61730-2:2007 PHOTOVOLTAIC (PV) MODULE SAFETY QUALIFICATION - PART 2: REQUIREMENTS FOR TESTING (IEC 61730-2:2004 (MOD))
BS EN 61643-21 : 2001 LOW VOLTAGE SURGE PROTECTIVE DEVICES - PART 21: SURGE PROTECTIVE DEVICES CONNECTED TO TELECOMMUNICATIONS AND SIGNALLING NETWORKS - PERFORMANCE REQUIREMENTS AND TESTING METHODS
CEI EN 61114-2 : 1997 METHODS OF MEASUREMENT ON RECEIVING ANTENNAS FOR SATELLITE BROADCAST TRANSMISSION IN THE 11/12 GHZ BAND PART 2: MECHANICAL AND ENVIRONMENTAL TESTS ON INDIVIDUAL AND COLLECTIVE RECEIVING ANTENNAS
I.S. EN 60384-6:2005 FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 6: SECTIONAL SPECIFICATION - FIXED METALLIZED POLYCARBONATE FILM DIELECTRIC D.C. CAPACITORS
I.S. EN 60835-1-1:1993 METHODS OF MEASUREMENT FOR EQUIPMENT USED IN DIGITAL MICROWAVE RADIO TRANSMISSION SYSTEMS - PART 1: MEASUREMENTS COMMON TO TERRESTRIAL RADIO-RELAY SYSTEMS AND SATELLITE EARTH STATIONS - SECTION ONE: GENERAL
CEI EN 61076-2 : 2012 CONNECTORS FOR ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 2: SECTIONAL SPECIFICATION FOR CIRCULAR CONNECTORS
I.S. EN 60068-2-65:2013 ENVIRONMENTAL TESTING - PART 2-65: TESTS - TEST FG: VIBRATION - ACOUSTICALLY INDUCED METHOD (IEC 60068-2-65:2013 (EQV))
I.S. EN 140401-804:2011 DETAIL SPECIFICATION: FIXED LOW POWER FILM HIGH STABILITY SMD RESISTORS - RECTANGULAR - STABILITY CLASSES 0,1; 0,25
BS EN 60384-2:2012 Fixed capacitors for use in electronic equipment Sectional specification. Fixed metallized polyethylene terephthalate film dielectric d.c. capacitors
BS EN 140402 : 2015 BLANK DETAIL SPECIFICATION: FIXED LOW POWER WIREWOUND SURFACE MOUNT (SMD) RESISTORS
I.S. EN 60068-2-75:2014 ENVIRONMENTAL TESTING - PART 2-75: TESTS - TEST EH: HAMMER TESTS
BS EN 61076-2-101:2012 Connectors for electronic equipment. Product requirements Circular connectors. Detail specification for M12 connectors with screw-locking
I.S. EN 61076-2-109:2014 CONNECTORS FOR ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 2-109: CIRCULAR CONNECTORS - DETAIL SPECIFICATION FOR CONNECTORS WITH M 12 X 1 SCREW-LOCKING, FOR DATA TRANSMISSION FREQUENCIES UP TO 500 MHZ
CEI EN 60068-2-52 : 1997 ENVIRONMENTAL TESTING - PART 2: TESTS - TEST KB: SALT MIST, CYCLIC (SODIUM CHLORIDE SOLUTION)
CEI EN 60068-2-48 : 2000 ENVIRONMENTAL TESTING - PART 2: TESTS - GUIDANCE ON THE APPLICATION OF THE TESTS OF IEC PUBLICATION 60068 TO SIMULATE THE EFFECTS OF STORAGE
I.S. EN 61076-4-102:1998 CONNECTORS WITH ASSESSED QUALITY, FOR USE IN D.C., LOW-FREQUENCY ANALOGUE AND IN DIGITAL HIGH SPEED DATA APPLICATIONS - PART 4: PRINTED BOARD CONNECTORS - SECTION 102: DETAIL SPECIFICATION FOR TWO-PART SINGLE-POLE CONNECTORS, FOR MULTIPLE USES ON PLUG-IN UNITS, WITH PRE-CENTRING, CODING AND EARLY MATING FEATURES, HAVING A METRIC GRID IN ACCORDANCE WITH IEC 60917
I.S. EN 60939-3:2015 PASSIVE FILTER UNITS FOR ELECTROMAGNETIC INTERFERENCE SUPPRESSION - PART 3: PASSIVE FILTER UNITS FOR WHICH SAFETY TESTS ARE APPROPRIATE
EN 60728-13-1:2017 Cable networks for television signals, sound signals and interactive services - Part 13-1: Bandwidth expansion for broadcast signal over FTTH system
AAMI ISO 14708-5 : 2010 IMPLANTS FOR SURGERY - ACTIVE IMPLANTABLE MEDICAL DEVICES - PART 5: CIRCULATORY SUPPORT DEVICES
I.S. ETS 300 158:1993 SATELLITE EARTH STATIONS (SES); TELEVISION RECEIVE ONLY (TVRO-FSS) SATELLITE EARTH STATIONS OPERATING IN THE 11/12 GHZ FSS BANDS
BS EN 60384-24:2015 Fixed capacitors for use in electronic equipment Sectional specification. Surface mount fixed tantalum electrolytic capacitors with conductive polymer solid electrolyte
I.S. EN 60384-24:2015 FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 24: SECTIONAL SPECIFICATION - SURFACE MOUNT FIXED TANTALUM ELECTROLYTIC CAPACITORS WITH CONDUCTIVE POLYMER SOLID ELECTROLYTE
I.S. EN 61076-5:2002 CONNECTORS FOR USE IN D.C., LOW-FREQUENCY ANALOGUE AND DIGITAL HIGH-SPEED DATA APPLICATIONS - PART 5: IN-LINE SOCKETS WITH ASSESSED QUALITY - SECTIONAL SPECIFICATION
I.S. EN 175200:1998 CIRCULAR CONNECTORS (SECTIONAL SPECIFICATION)
BS EN 50173-1:2011 Information technology. Generic cabling systems General requirements
I.S. EN 60068-2-80:2005 ENVIRONMENTAL TESTING - PART 2-80: TESTS - TEST FI: VIBRATION - MIXED MODE
DIN EN 60068-2-69 : 2007 ENVIRONMENTAL TESTING - PART 2-69: TESTS - TEST TE/TC: SOLDERABILITY TESTING OF ELECTRONIC COMPONENTS AND PRINTED BOARDS BY THE WETTING BALANCE (FORCE MEASUREMENT) METHOD (IEC 60068-2-69:2017)
I.S. EN 60384-1:2016 FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 1: GENERIC SPECIFICATION
ISO/TS 20100:2008 Gaseous hydrogen Fuelling stations
IEC 60839-2-4:1990 Alarm systems. Part 2: Requirements for intruder alarm systems. Section Four: Ultrasonic Doppler detectors for use in buildings
ISO 21927-9:2012 Smoke and heat control systems — Part 9: Specification for control equipment
I.S. EN 61984:2009 CONNECTORS - SAFETY REQUIREMENTS AND TESTS
I.S. EN 54-7:2000 COMPONENTS OF AUTOMATIC FIRE DETECTION SYSTEMS - POINT-TYPE SMOKE DETECTORS - DETECTORS USING SCATTERED LIGHT, TRANSMITTED LIGHT OR IONIZATION
I.S. EN 54-22:2015 FIRE DETECTION AND FIRE ALARM SYSTEMS - PART 22: RESETTABLE LINE-TYPE HEAT DETECTORS
UNE-EN 61481-2:2015 Live working - Phase comparators - Part 2: Resistive type to be used for voltages from 1 kV to 36 kV a.c.
I.S. EN 62246-1:2015 REED SWITCHES - PART 1: GENERIC SPECIFICATION
I.S. EN 61338-1:2005 WAVEGUIDE TYPE DIELECTRIC RESONATORS - PART 1: GENERIC SPECIFICATION
I.S. EN 60068-2-2:2007 ENVIRONMENTAL TESTING - PART 2-2: TESTS - TEST B: DRY HEAT
OIML R 49-2 : 2013 WATER METERS FOR COLD POTABLE WATER AND HOT WATER - PART 2: TEST METHODS
NF EN 60127-6 : 2014 MINIATURE FUSES - PART 6: FUSE-HOLDERS FOR MINIATURE CARTRIDGE FUSE-LINKS
CEI EN 61753-111-8 : 2011 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS PERFORMANCE STANDARD - PART 111-8: SEALED CLOSURES FOR CATEGORY G - GROUND
BS 5967-1:1980 Operating conditions for industrial-process measurement and control equipment. Specification for temperature, humidity and barometric pressure
I.S. EN IEC 60068-2-52:2018 ENVIRONMENTAL TESTING - PART 2: TESTS - TEST KB: SALT MIST, CYCLIC (SODIUM CHLORIDE SOLUTION)
ISO/TS 7240-29:2017 Fire detection and alarm systems — Part 29: Video fire detectors
BS EN 140401-804 : 2011 DETAIL SPECIFICATION: FIXED LOW POWER FILM HIGH STABILITY SMD RESISTORS - RECTANGULAR - STABILITY CLASSES 0,1; 0,25
OIML R 35-2 : 2011 MATERIAL MEASURES OF LENGTH FOR GENERAL USE - PART 2: TEST METHODS
CEI EN 60068-2-27 : 2012 ENVIRONMENTAL TESTING - PART 2-27: TESTS - TEST EA AND GUIDANCE: SHOCK
BIS IS/IEC 62271-1 : 2007 HIGH-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 1: COMMON SPECIFICATIONS
NF EN 60068-3-5 : 2002 ENVIRONMENTAL TESTING - PART 3-5: SUPPORTING DOCUMENTATION AND GUIDANCE - CONFIRMATION OF THE PERFORMANCE OF TEMPERATURE CHAMBERS
I.S. EN 133000:1998 PASSIVE FILTER UNITS FOR ELECTROMAGNETIC INTERFERENCE SUPPRESSION (GENERIC SPECIFICATION)
CEI EN 60849 : 2007 SOUND SYSTEMS FOR EMERGENCY PURPOSES
IEC TR 60721-4-4:2001+AMD1:2003 CSV Classification of environmental conditions - Part 4-4: Guidance for the correlation and transformation of environmental condition classes of IEC 60721-3 to the environmental tests of IEC 60068 - Stationary use at non-weatherprotected locations
UNE-EN 62790:2015 Junction boxes for photovoltaic modules - Safety requirements and tests
CEI EN 61076-6 : 2004 CONNECTORS FOR ELECTRONIC EQUIPMENT - PART 6: LOOSE PART CONTACTS - SECTIONAL SPECIFICATION
CEI EN 61753-101-2 : 2007 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS PERFORMANCE STANDARD - PART 101-2: FIBRE MANAGEMENT SYSTEMS FOR CATEGORY C - CONTROLLED ENVIRONMENT
CECC 75101-807 : 1994 MODULAR TWO-PART CONNECTORS FOR PRINTED BOARDS AND BACKPLANES, GRIDOF 2.5 mm - ACCORDING TO IEC 917 (DETAIL SPECIFICATION)
I.S. EN 61146-3:1998 VIDEO CAMERAS (PAL/SECAM/NTSC) - METHODS OF MEASUREMENT - PART 3: NON-BROADCAST CAMERA-RECORDERS
UNI CEN ISO/TS 24534-2 : 2008 AUTOMATIC VEHICLE AND EQUIPMENT IDENTIFICATION - ELECTRONIC REGISTRATION IDENTIFICATION (ERI) FOR VEHICLES - PART 2: OPERATIONAL REQUIREMENTS
EN IEC 61643-331:2018 Components for low-voltage surge protective devices - Part 331: Performance requirements and test methods for metal oxide varistors (MOV)
I.S. EN 60068-2-57:2013 ENVIRONMENTAL TESTING - PART 2-57: TESTS - TEST FF: VIBRATION - TIME-HISTORY AND SINE-BEAT METHOD (IEC 60068-2-57:2013 (EQV))
EN 50173-1:2011 Information technology - Generic cabling systems - Part 1: General requirements
NF EN 60068-2-2 : 2007 ENVIRONMENTAL TESTING - PART 2-2: TESTS - TESTS B: DRY HEAT
BS EN 61000-4-18 : 2007 ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-18: TESTING AND MEASUREMENT TECHNIQUES - DAMPED OSCILLATORY WAVE IMMUNITY TEST
I.S. EN 61753-111-9:2010 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS PERFORMANCE STANDARD - PART 111-9: SEALED CLOSURES FOR CATEGORY S - SUBTERRANEAN
NF EN 60068 2-6 : 2008 ENVIRONMENTAL TESTING - PART 2-6: TESTS - TEST FC: VIBRATION (SINUSOIDAL)
I.S. EN 60068-2-53:2010 ENVIRONMENTAL TESTING - PART 2-53: TESTS AND GUIDANCE: COMBINED CLIMATIC (TEMPERATURE/HUMIDITY) AND DYNAMIC (VIBRATION/SHOCK) TESTS
I.S. EN 62884-1:2017 MEASUREMENT TECHNIQUES OF PIEZOELECTRIC, DIELECTRIC AND ELECTROSTATIC OSCILLATORS - PART 1: BASIC METHODS FOR THE MEASUREMENT
NF EN 60068 2-48 : 2000 ENVIRONMENTAL TESTING - PART 2: TESTS - GUIDANCE ON THE APPLICATION OF THE TEST OF IEC 60068 TO SIMULATE THE EFFECTS OF STORAGE
CEI EN 60068-2-40 : 2000 ENVIRONMENTAL TESTING - PART 2: TESTS - TEST Z/AM: COMBINED COLD/LOW AIR PRESSURE TESTS
CEI EN 61076-2-105 : 2010 CONNECTORS FOR ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 2-105: CIRCULAR CONNECTORS - DETAIL SPECIFICATION FOR M5 CONNECTORS WITH SCREW-LOCKING
CEI EN 60068-2-83 : 2012 ENVIRONMENTAL TESTING - PART 2-83: TESTS - TEST TF: SOLDERABILITY TESTING OF ELECTRONIC COMPONENTS FOR SURFACE MOUNTING DEVICES (SMD) BY THE WETTING BALANCE METHOD USING SOLDER PASTE
NFS 61 023 : 2004 XP FIRE DETECTION SYSTEMS (FDS) USING RADIO LINKS
UNI EN 54-16 : 2008 FIRE DETECTION AND FIRE ALARM SYSTEMS - PART 16: VOICE ALARM CONTROL AND INDICATING EQUIPMENT
NF EN 61076-3-116 : 2009 CONNECTORS FOR ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 3-116: RECTANGULAR CONNECTORS - DETAIL SPECIFICATION FOR PROTECTIVE HOUSINGS FOR USE WITH 8-WAY SHIELDED AND UNSHIELDED CONNECTORS FOR FREQUENCIES UP TO 600 MHZ FOR INDUSTRIAL ENVIRONMENTS INCORPORATING THE IEC 60603-7 SERIES INTERFACE - VARIANT 13 RELATED TO IEC 61076-3-106 - LOCKING LEVER
NF EN 61210 : 2011 CONNECTING DEVICES - FLAT QUICK-CONNECT TERMINATIONS FOR ELECTRICAL COPPER CONDUCTORS - SAFETY REQUIREMENTS
EN 54-12:2015 Fire detection and fire alarm systems - Part 12: Smoke detectors - Line detectors using an optical beam
CSA C22.2 No. 61730-2 : 2011 : INC : AMD 1 : 2013 PHOTOVOLTAIC (PV) MODULE SAFETY QUALIFICATION - PART 2: REQUIREMENTS FOR TESTING
ISO 7240-27:2009 Fire detection and alarm systems Part 27: Point-type fire detectors using a scattered-light, transmitted-light or ionization smoke sensor, an electrochemical-cell carbon-monoxide sensor and a heat sensor
I.S. EN 61076-3-104:2017 CONNECTORS FOR ELECTRICAL AND ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 3-104: DETAIL SPECIFICATION FOR 8-WAY, SHIELDED FREE AND FIXED CONNECTORS FOR DATA TRANSMISSIONS WITH FREQUENCIES UP TO 2000 MHZ
I.S. EN 60393-1:2009 POTENTIOMETERS FOR USE IN ELECTRONIC EQUIPMENT - PART 1: GENERIC SPECIFICATION
IEC 60321-3:1990 Auxiliary printed board information. Part 3: Guidelines for artwork
ISO 7240-22:2017 Fire detection and alarm systems — Part 22: Smoke-detection equipment for ducts
ISO 7240-17:2009 Fire detection and fire alarm systems Part 17: Short-circuit isolators
ISO 7240-24:2016 Fire detection and fire alarm systems Part 24: Fire alarm loudspeakers
IEC TS 62610-2:2011 Mechanical structures for electronic equipment - Thermal management for cabinets in accordance with IEC 60297 and IEC 60917 series - Part 2: Design guide: Method for determination of forced air-cooling structure
I.S. EN 60068-2-54:2006 ENVIRONMENTAL TESTING - PART 2-54: TESTS - TEST TA: SOLDERABILITY TESTING OF ELECTRONIC COMPONENTS BY THE WETTING BALANCE METHOD
I.S. EN 61313-1:1999 FIBRE OPTIC PASSIVE COMPONENTS AND CABLE ASSEMBLIES - PART 1: CAPABILITY APPROVAL - GENERIC SPECIFICATION
IEC 62679-1-1:2014 Electronic paper displays - Part 1-1: Terminology
IEC TR 60721-4-1:2001+AMD1:2003 CSV Classification of environmental conditions - Part 4-1: Guidance for the correlation and transformation of environmental condition classes of IEC 60721-3 to the environmental tests of IEC 60068 - Storage
IEC 60068-2-27:2008 Environmental testing - Part 2-27: Tests - Test Ea and guidance: Shock
I.S. EN 60068-2-62:1996 ENVIRONMENTAL TESTING - PART 2: TEST METHODS TEST EF: IMPACT, PENDULUM HAMMER
IEC 60115-1:2008 Fixed resistors for use in electronic equipment - Part 1: Generic specification
IEC 61210:2010 Connecting devices - Flat quick-connect terminations for electrical copper conductors - Safety requirements
IEC PAS 61076-3-109:2001 Connectors for electronic equipment - Part 3-109: Detail specification for two-part cable to board connector for high speed data application in a harsh industrial environment - Protection rate IP67 according to IEC 60529
IEC 60728-3:2017 RLV Cable networks for television signals, sound signals and interactive services - Part 3: Active wideband equipment for cable networks
IEC TR 60721-4-2:2001+AMD1:2003 CSV Classification of environmental conditions - Part 4-2: Guidance for the correlation and transformation of environmental condition classes of IEC 60721-3 to the environmental tests of IEC 60068 - Transportation
IEC 62642-2-2:2010 Alarm systems - Intrusion and hold-up systems - Part 2-2: Intrusion detectors - Passive infrared detectors
IEC 62642-2-72:2015 Alarm systems - Intrusion and hold-up systems - Part 2-72: Intrusion detectors - Glass break detectors (passive)
I.S. CECC 75101-807:1994 MODULAR TWO-PART CONNECTORS FOR PRINTED BOARDS AND BACKPLANES, GRID OF 2.5 MM - (ACCORDING TO IEC 917) (DETAIL SPECIFICATION)
IEC 62104:2015 Characteristics of DAB receivers
I.S. EN 61180-1:1995 HIGH-VOLTAGE TEST TECHNIQUES FOR LOW-VOLTAGE EQUIPMENT - PART 1: DEFINITIONS, TEST AND PROCEDURE REQUIREMENTS
IEC 60780:1998 Nuclear power plants - Electrical equipment of the safety system - Qualification
IEC 60393-1:2008 Potentiometers for use in electronic equipment - Part 1: Generic specification
I.S. EN 61189-1:1999 TEST METHODS FOR ELECTRICAL MATERIALS, INTERCONNECTION STRUCTURES AND ASSEMBLIES - PART 1: GENERAL TEST METHODS AND METHODOLOGY
S.R. CLC/TS 50131-2-10:2014 ALARM SYSTEMS - INTRUSION AND HOLD-UP SYSTEMS - PART 2-10: INTRUSION DETECTORS - LOCK STATE CONTACTS (MAGNETIC)
S.R. CLC/TS 50467:2008 RAILWAY APPLICATIONS - ROLLING STOCK - ELECTRICAL CONNECTORS, REQUIREMENTS AND TEST METHODS
IEC 61196-4:2015 Coaxial communication cables - Part 4: Sectional specification for radiating cables
IEC 60747-10:1991 Semiconductor devices - Part 10: Generic specification for discrete devices and integrated circuits
I.S. EN 60068-2-41:1999 ENVIRONMENTAL TESTING - PART 2: TESTS - TEST Z/BM: COMBINED DRY HEAT/LOW AIR PRESSURE TESTS
IEC 60384-15:2017 Fixed capacitors for use in electronic equipment - Part 15: Sectional specification: Fixed tantalum capacitors with non-solid or solid electrolyte
I.S. EN 62193:2003 LIVE WORKING - TELESCOPIC STICKS AND TELESCOPIC MEASURING STICKS
I.S. EN 60938-1:1999 FIXED INDUCTORS FOR ELECTROMAGNETIC INTERFERENCE SUPPRESSION - PART 1: GENERIC SPECIFICATION
EN 61760-4:2015/A1:2018 SURFACE MOUNTING TECHNOLOGY - PART 4: CLASSIFICATION, PACKAGING, LABELLING AND HANDLING OF MOISTURE SENSITIVE DEVICES (IEC 61760-4:2015/A1:2018)
IEC 62642-4:2010 Alarm systems - Intrusion and hold-up systems - Part 4: Warning devices
I.S. EN 60115-1:2011 FIXED RESISTORS FOR USE IN ELECTRONIC EQUIPMENT - PART 1: GENERIC SPECIFICATION (IEC 60115-1:2008, MODIFIED)
I.S. ENV ISO 14815:2000 ROAD TRANSPORT AND TRAFFIC TELEMATICS - AUTOMATIC VEHICLE AND EQUIPMENT IDENTIFICATION - SYSTEM SPECIFICATION
I.S. EN 61587-1:2017 MECHANICAL STRUCTURES FOR ELECTRONIC EQUIPMENT - TESTS FOR IEC 60917 AND IEC 60297 SERIES - PART 1: ENVIRONMENTAL REQUIREMENTS, TEST SET-UP AND SAFETY ASPECTS FOR CABINETS, RACKS, SUBRACKS AND CHASSIS UNDER INDOOR CONDITION USE AND TRANSPORTATION
IEC 62629-12-1:2014 3D Display devices - Part 12-1: Measuring methods for stereoscopic displays using glasses - Optical
I.S. EN 61747-5:1999 LIQUID CRYSTAL AND SOLID-STATE DISPLAY DEVICES - PART 5: ENVIRONMENTAL, ENDURANCE AND MECHANICAL TEST METHODS
IEC 61000-4-12:2017 RLV Electromagnetic Compatibility (EMC) - Part 4-12: Testing and measurement techniques - Ring wave immunity test
EN 140200 : 1996 AMD 1 2001 FIXED POWER RESISTORS (SECTIONAL SPECIFICATION)
DIN EN ISO 10472-1:2009-10 Safety requirements for industrial laundry machinery - Part 1: Common requirements (ISO 10472-1:1997)
EN 175101-809:2004/corrigendum Jun. 2005 DETAIL SPECIFICATION: TWO-PART CONNECTORS FOR PRINTED BOARDS HAVING A GRID OF 2,54 MM, SHORT VERSION IN COMPLIANCE WITH CECC 75 101-801, WITH ASSESSED QUALITY
NF EN 60352-4 : 2001 SOLDERLESS CONNECTIONS - PART 4: SOLDERLESS NON-ACCESSIBLE INSULATION DISPLACEMENT CONNECTIONS - GENERAL REQUIREMENTS, TEST METHODS AND PRACTICAL GUIDANCE
NF EN 60679-1 : 2013 QUARTZ CRYSTAL CONTROLLED OSCILLATORS OF ASSESSED QUALITY - PART 1: GENERIC SPECIFICATION
DIN EN 14637 E : 2008 BUILDING HARDWARE - ELECTRICALLY CONTROLLED HOLD-OPEN SYSTEMS FOR FIRE/SMOKE DOOR ASSEMBLIES - REQUIREMENTS, TEST METHODS, APPLICATION AND MAINTENANCE
BS EN 54-17:2005 Fire detection and fire alarm systems Short-circuit isolators
UNE-EN 62271-202:2015 High-voltage switchgear and controlgear - Part 202: High-voltage/low-voltage prefabricated substation
EN 62823:2015 Thyristor valves for thyristor controlled series capacitors (TCSC) - Electrical testing
IEC 60143-4:2010 Series capacitors for power systems - Part 4: Thyristor controlled series capacitors
IEC 62024-2:2008 High frequency inductive components - Electrical characteristics and measuring methods - Part 2: Rated current of inductors for DC to DC converters
IEC 61076-4-113:2002 Connectors for electronic equipment - Printed board connectors - Part 4-113: Detail specification for two-part connectors having 5 rows with a grid of 2,54 mm for printed boards and backplanes in bus applications
IEC 60368-1:2000+AMD1:2004 CSV Piezoelectric filters of assessed quality - Part 1: Genericspecification
IEC 61189-5:2006 Test methods for electrical materials, interconnection structures and assemblies - Part 5: Test methods for printed board assemblies
BS EN 54-21:2006 Fire detection and fire alarm systems Alarm transmission and fault warning routing equipment
IEC TR 62866:2014 Electrochemical migration in printed wiring boards and assemblies - Mechanisms and testing
IEC 60603-7:2008+AMD1:2011 CSV Connectors for electronic equipment - Part 7: Detail specification for 8-way, unshielded, free and fixed connectors
IEC 60068-2-1:2007 Environmental testing - Part 2-1: Tests - Test A: Cold
IEC 61169-1:2013 Radio frequency connectors - Part 1: Generic specification - General requirements and measuring methods
IEC 61180:2016 High-voltage test techniques for low-voltage equipment - Definitions, test and procedure requirements, test equipment
IEC 60068-2-75:2014 Environmental testing - Part 2-75: Tests - Test Eh: Hammer tests
IEC 62341-5:2009 Organic light emitting diode (OLED) displays - Part 5: Environmental testing methods
IEC 60384-24:2015 Fixed capacitors for use in electronic equipment - Part 24: Sectional specification - Fixed tantalum electrolytic surface mount capacitors with conductive polymer solid electrolyte
UNE-EN 45501:2016 Metrological aspects of non-automatic weighing instruments
PD IEC/TS 62788-2:2017 Measurement procedures for materials used in photovoltaic modules Polymeric materials. Frontsheets and backsheets
IEC 62604-1:2015 Surface acoustic wave (SAW) and bulk acoustic wave (BAW) duplexers of assessed quality - Part 1: Generic specification
IEC 62391-2:2006 Fixed electric double-layer capacitors for use in electronic equipment - Part 2: Sectional specfication - Electric double layer capacitors for power application
BS EN 14154-2 : 2005 WATER METERS - PART 2: INSTALLATION AND CONDITIONS OF USE
IEC 61881-3:2012+AMD1:2013 CSV Railway applications - Rolling stock equipment - Capacitors forpower electronics - Part 3: Electric double-layer capacitors
IEC 60393-6:2015 Potentiometers for use in electronic equipment - Part 6: Sectional specification - Surface mount preset potentiometers
IEC 61000-4-19:2014 Electromagnetic compatibility (EMC) - Part 4-19: Testing and measurement techniques - Test for immunity to conducted, differential mode disturbances and signalling in the frequency range 2 kHz to 150 kHz at a.c. power ports
IEC 60603-7-1:2011 Connectors for electronic equipment - Part 7-1: Detail specification for 8-way, shielded, free and fixed connectors
DIN EN 54-17 E : 2006 FIRE DETECTION AND FIRE ALARM SYSTEMS - PART 17: SHORT-CIRCUIT ISOLATORS
IEC 60068-2-43:2003 Environmental testing - Part 2-43: Tests - Test Kd: Hydrogen sulphide test for contacts and connections
BS EN 14637:2007 Building hardware. Electrically controlled hold-open systems for fire/smoke door assemblies. Requirements, test methods, application and maintenance
IEC 62137-4:2014 Electronics assembly technology - Part 4: Endurance test methods for solder joint of area array type package surface mount devices
IEC 60068-2-65:2013 Environmental testing - Part 2-65: Tests - Test Fg: Vibration - Acoustically induced method
IEC 61337-1:2004 Filters using waveguide type dielectric resonators - Part 1: Generic specification
IEC 60068-2-83:2011 Environmental testing - Part 2-83: Tests - Test Tf: Solderability testing of electronic components for surface mounting devices (SMD) by the wetting balance method using solder paste
IEC 62575-1:2015 Radio frequency (RF) bulk acoustic wave (BAW) filters of assessed quality - Part 1: Generic specification
18/30359998 DC : 0 BS ISO 19880-1 - GASEOUS HYDROGEN - FUELLING STATIONS - PART 1: GENERAL REQUIREMENTS
IEC 61747-10-1:2013 Liquid crystal display devices - Part 10-1: Environmental, endurance and mechanical test methods - Mechanical
IEC 61189-1:1997+AMD1:2001 CSV Test methods for electrical materials, interconnection structures and assemblies - Part 1: General test methods and methodology
EN 60352-3:1994 Solderless connections - Part 3: Solderless accessible insulation displacement connections - General requirements, test methods and practical guidance
UNE-EN 50521:2010 Connectors for photovoltaic systems - Safety requirements and tests
UNI EN 54-3 : 2014 FIRE DETECTION AND FIRE ALARM SYSTEMS - PART 3: FIRE ALARM DEVICES - SOUNDERS
EN 62790:2015 Junction boxes for photovoltaic modules - Safety requirements and tests
ASTM E 2851/E2851M : 2013 Standard Specification for Ruggedness Requirements for HAZMAT Instrumentation
CEI EN 60068-2-64 : 2012 ENVIRONMENTAL TESTING - PART 2-64: TESTS - TEST FH: VIBRATION, BROADBAND RANDOM AND GUIDANCE
EN 60268-7:2011 Sound system equipment - Part 7: Headphones and earphones
EN 60664-1:2007 Insulation coordination for equipment within low-voltage systems - Part 1: Principles, requirements and tests
I.S. EN 61646:2008 THIN-FILM TERRESTRIAL PHOTOVOLTAIC (PV) MODULES - DESIGN QUALIFICATION AND TYPE APPROVAL
UNE-EN 14154-2:2005 Water meters - Part 2 : Installation and conditions of use
EN 140401-804:2011/A1:2013 DETAIL SPECIFICATION: FIXED LOW POWER FILM HIGH STABILITY SMD RESISTORS - RECTANGULAR - STABILITY CLASSES 0,1; 0,25
EN 60352-4:1994/A1:2000 SOLDERLESS CONNECTIONS - PART 4: SOLDERLESS NON-ACCESSIBLE INSULATION DISPLACEMENT CONNECTIONS - GENERAL REQUIREMENTS, TEST METHODS AND PRACTICAL GUIDANCE
OVE/ONORM EN 60384-16 : 2006 FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 16: SECTIONAL SPECIFICATION - FIXED METALLIZED POLYPROPYLENE FILM DIELECTRIC D.C. CAPACITORS
EN 62024-2:2009 High frequency inductive components - Electrical characteristics and measuring methods - Part 2: Rated current of inductors for DC to DC converters
EN 61007:1997 Transformers and inductors for use in electronic and telecommunication equipment - Measuring methods and test procedures
EN 61760-1:2006 SURFACE MOUNTING TECHNOLOGY - PART 1: STANDARD METHOD FOR THE SPECIFICATION OF SURFACE MOUNTING COMPONENTS (SMDS)
EN ISO 8230-1:2008 Safety requirements for dry-cleaning machines - Part 1: Common safety requirements (ISO 8230-1:2008)
ENV 50204 : DRAFT 1995 RADIATED ELECTROMAGNETIC FIELD FROM DIGITAL RADIO TELEPHONES - IMMUNITY TEST
EN 60839-11-1:2013/AC:2015 ALARM AND ELECTRONIC SECURITY SYSTEMS - PART 11-1: ELECTRONIC ACCESS CONTROL SYSTEMS - SYSTEM AND COMPONENTS REQUIREMENTS (IEC 60839-11-1:2013)
IEC 61811-1:2015 Electromechanical telecom elementary relays of assessed quality - Part 1: Generic specification and blank detail specification
BS 4200-3:1979 Guide on the reliability of electronic equipment and parts used therein Presentation of reliability data on electronic components (or parts)
UNI EN 54-23 : 2010 FIRE DETECTION AND FIRE ALARM SYSTEMS - PART 23: FIRE ALARM DEVICES - VISUAL ALARM DEVICES
EN 147000:1993 Generic Specification: Sockets for use with electrical relays of assessed quality
EN 50136-2-1 : 98 AMD 1 2001 ALARM SYSTEMS - ALARM TRANSMISSION SYSTEMS AND EQUIPMENT - PART 2-1: GENERAL REQUIREMENTS FOR ALARM TRANSMISSION EQUIPMENT
EN 61000-4-28:2000/A2:2009 ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-28: TESTING AND MEASUREMENT TECHNIQUES - VARIATION OF POWER FREQUENCY, IMMUNITY TEST FOR EQUIPMENT WITH INPUT CURRENT NOT EXCEEDING 16 A PER PHASE
UNI EN 54-20 : 2006 FIRE DETECTION AND FIRE ALARM SYSTEMS - PART 20: ASPIRATING SMOKE DETECTORS
UNI EN 14154-2 : 2011 WATER METERS - PART 2: INSTALLATION AND CONDITIONS OF USE
OVE/ONORM EN 60068-2-20 : 2009 ENVIRONMENTAL TESTING - PART 2-20: TESTS - TEST T: TEST METHODS FOR SOLDERABILITY AND RESISTANCE TO SOLDERING HEAT OF DEVICES WITH LEADS
UNI EN 14604 : 2005 SMOKE ALARM DEVICES
EN 60249-1 : 1993 COR 1994 BASE MATERIALS FOR PRINTED CIRCUITS - PART 1: TEST METHODS
UNI EN ISO 10472-1 : 2009 SAFETY REQUIREMENTS FOR INDUSTRIAL LAUNDRY MACHINERY - PART 1: COMMON REQUIREMENTS
NF EN 54-7 : 2001 AMD 2 2006 FIRE DETECTION AND FIRE ALARM SYSTEMS - PART 7: SMOKE DETECTORS - POINT DETECTORS USING SCATTERED LIGHT, TRANSMITTED LIGHT OR IONIZATION
IEC 60068-2-52 REDLINE : 3ED 2017
UNE-EN 54-16:2010 Fire detection and fire alarm systems - Part 16: Voice alarm control and indicating equipment
BS EN 61076-3-122:2017 Connectors for electrical and electronic equipment. Product requirements Detail specification for 8-way, shielded, free and fixed connectors for I/O and Gigabit Ethernet applications in harsh environments
BS EN 50311:2003 Railway applications. Rolling stock. D.C. supplied electronic ballasts for lighting fluorescent lamps
CEI EN 60758 : 2010 SYNTHETIC QUARTZ CRYSTAL - SPECIFICATIONS AND GUIDELINES FOR USE
CEI EN 61076-4-103 : 2001 CONNECTORS FOR USE IN D.C. LOW - FREQUENCY ANALOGUE AND DIGITAL HIGH SPEED DATA APPLICATIONS PART 4-103: PRINTED BOARD CONNECTORS WITH ASSESSED QUALITY DETAIL SPECIFICATION FOR TWO-PART CONNECTORS WITH SHIELDING AND A BASIC GRID OF 2,5 MM
CEI EN 61988-2-3 : 2010 PLASMA DISPLAY PANELS - PART 2-3: MEASURING METHODS - IMAGE QUALITY: DEFECTS AND DEGRADATION
CEI EN 60068-2-2 : 2008 ENVIRONMENTAL TESTING - PART 2-2: TESTS - TEST B: DRY HEAT
I.S. EN 61169-48:2015 RADIO-FREQUENCY CONNECTORS - PART 48: SECTIONAL SPECIFICATION FOR SERIES BMP R.F. COAXIAL CONNECTORS
BS 3680-3H:1993 Measurement of liquid flow in open channels. Stream flow measurement Electromagnetic method using a full-channel-width coil
11/30217192 DC : 0 BS EN ISO 4064-2 - WATER METERS INTENDED FOR THE METERING OF COLD POTABLE WATER AND HOT WATER - PART 2: TEST METHODS
07/30164493 DC : 0 BS EN 14637 - BUILDING HARDWARE - ELECTRICALLY CONTROLLED HOLD-OPEN SYSTEMS FOR FIRE/SMOKE DOOR ASSEMBLIES - REQUIREMENTS, TEST METHODS, APPLICATIONS AND MAINTENANCE
BS EN 61196-10:2016 Coaxial communication cables Sectional specification for semi-rigid cables with polytetrafluoroethylene (PTFE) dielectric
BS EN 61169-49:2014 Radio-frequency connectors Sectional specification for SMAA series R.F connectors
UNE-EN 60068-2-27:2011 Environmental testing -- Part 2-27: Tests - Test Ea and guidance: Shock
ISO 7240-12:2014 Fire detection and alarm systems Part 12: Line type smoke detectors using a transmitted optical beam
BS CECC 13000(1981) : 1981 AMD 7573 HARMONIZED SYSTEM OF QUALITY ASSESSMENT FOR ELECTRONIC COMPONENTS - GENERIC SPECIFICATION - CAMERA TUBES
IEC 60728-13-1:2017 Cable networks for television signals, sound signals and interactive services - Part 13-1: Bandwidth expansion for broadcast signal over FTTH system
12/30260687 DC : 0 BS EN 60384-20 - FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 20: SECTIONAL SPECIFICATION - FIXED METALLIZED POLYPHENYLENE SULFIDE FILM DIELECTRIC SURFACE MOUNT D.C. CAPACITORS
IEC TS 62257-3:2015