• There are no items in your cart
We noticed you’re not on the correct regional site. Switch to our AMERICAS site for the best experience.
Dismiss alert

IEC 60410:1973

Withdrawn
Withdrawn

A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.

Sampling plans and procedures for inspection by attributes
Available format(s)

Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users

Withdrawn date

31-12-2021

Language(s)

English - French, English, French

Published date

01-01-1973

FOREWORD
PREFACE
Clause
1 Scope
2 Classification of defects and defectives
3 Percent defective and defects per hundred units
4 Acceptable quality level (AQL)
5 Submission of product
6 Acceptance and rejection
7 Drawing of samples
8 Normal, tightened and reduced inspection
9 Sampling plans
10 Determination of acceptability
11 Supplementary information
APPENDIX A Index of terms with special meanings
Tables
I Sample size code letters
II-A Single sampling plans for normal inspection (master
        table)
II-B Single sampling plans for tightened inspection
        (master table)
II-C Single sampling plans for reduced inspection (master
        table)
III-A Double sampling plans for normal inspection (master
        table)
III-B Double sampling plans for tightened inspection
        (master table)
III-C Double sampling plans for reduced inspection (master
        table)
IV-A Multiple sampling plans for normal inspection
        (master table)
IV-B Multiple sampling plans for tightened inspection
        (master table)
IV-C Multiple sampling plans for reduced inspection
        (master table)
V-A Average outgoing quality limit factors for normal
        inspection (single sampling)
V-B Average outgoing quality limit factors for
        tightened inspection (single sampling)
VI-A Limiting quality (in per cent defective) for which
        P = 10% (for normal inspection, single sampling)
VI-B Limiting quality (in defects per hundred units) for
        which P = 10% (for normal inspection, single
        sampling)
VII-A Limiting quality (in per cent defective) for which
        P = 5% (for normal inspection, single sampling)
VII-B Limiting quality (in defects per hundred units)
        for which P = 5% (for normal inspection, single
        sampling)
VIII Limit numbers for reduced inspection
IX Average sample size curves for double and multiple
        sampling
        Sampling plans and operating characteristic curves
        (and data) for:
X-A Sample size code letter A
X-B Sample size code letter B
X-C Sample size code letter C
X-D Sample size code letter D
X-E Sample size code letter E
X-F Sample size code letter F
X-G Sample size code letter G
X-H Sample size code letter H
X-J Sample size code letter J
X-K Sample size code letter K
X-L Sample size code letter L
X-M Sample size code letter M
X-N Sample size code letter N
X-P Sample size code letter P
X-Q Sample size code letter Q
X-R Sample size code letter R
X-S Sample size code letter S

Establishes sampling plans and procedures for inspection by attributes. These sampling plans are applicable, but not limited, to inspection of end items, components and raw materials, operations, materials in process, supplies in storage, maintenance operations, data or records and administrative procedures.

DevelopmentNote
Stability Date: 2015. (10/2012)
DocumentType
Standard
Pages
82
PublisherName
International Electrotechnical Committee
Status
Withdrawn

BS EN 61235:1995 Live working. Insulating hollow tubes for electrical purposes
BS EN 61076-2-102:2002 Connectors for electronic equipment. Circular connectors Circular connectors with assessed quality. Detail specification for plugs and jacks for external low voltage power supply
BS IEC 61051-2 : 1992 HARMONIZED SYSTEM OF QUALITY ASSESSMENT FOR ELECTRIC COMPONENTS - VARISTORS FOR USE IN ELECTRONIC EQUIPMENT - SECTIONAL SPECIFICATION FOR SURGE SUPPRESSION VARISTORS
NF EN 60384-26 : 2011 FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 26: SECTIONAL SPECIFICATION - FIXED ALUMINIUM ELECTROLYTIC CAPACITORS WITH CONDUCTIVE POLYMER SOLID ELECTROLYTE
NF EN 61229 : 96 AMD 2 2003 RIGID PROTECTIVE COVERS FOR LIVE WORKING ON A.C. INSTALLATIONS
NF EN 60384-18-2 : 2008 FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 18-2: BLANK DETAIL SPECIFICATION - FIXED ALUMINIUM ELECTROLYTIC SURFACE MOUNT CAPACITORS WITH NON-SOLID ELECTROLYTE - ASSESSMENT LEVEL EZ
BS QC 410400:1992 Harmonized system of quality assessment for electronic components. Potentiometers for use in electronic equipment. Sectional specification for rotary precision potentiometers
17/30355772 DC : 0 BS EN 62047-33 ED.1.0 - SEMICONDUCTOR DEVICES - MICRO-ELECTROMECHANICAL DEVICES - PART 33: MEMS PIEZORESISTIVE PRESSURE-SENSITIVE DEVICE
15/30325929 DC : 0 BS EN 61202-1 - FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - FIBRE OPTIC ISOLATORS - PART 1: GENERIC SPECIFICATION
BS EN 60770-2:2010 Transmitters for use in industrial-process control systems Methods for inspection and routine testing
13/30287730 DC : 0 BS EN 62828 ED 1.0 - REFERENCE CONDITIONS AND PROCEDURES FOR INDUSTRIAL MEASUREMENT TRANSMITTERS - PART 1: GENERAL PROCEDURES FOR ALL TYPES OF TRANSMITTERS
96/209014 DC : DRAFT JUL 1996 PREN 132900 - SECTIONAL SPECIFICATION - HIGH VOLTAGE CERAMIC CAPACITORS
05/30137420 DC : DRAFT AUG 2005 IEC 60086-1 - PRIMARY BATTERIES - PART 1: GENERAL
BS QC 410300:1992 Harmonized system of quality assessment for electronic components. Potentiometers for use in electronic equipment. Sectional specification for single-turn rotary low-power wirewound and non-wirewound potentiometers
BS EN 61076-7:2001 Connectors with assessed quality, for use in d.c., low-frequency analogue and in digital high speed data applications Cable outlet accessories with assessed quality, including qualification and capability approval. Sectional specification
BS EN 61047:2004 D.C. or A.C. supplied electronic step-down convertors for filament lamps. Performance requirements
16/30353588 DC : 0 BS EN 61020-1 ED 3.0 - ELECTROMECHANICAL SWITCHES FOR USE IN ELECTRICAL AND ELECTRONIC EQUIPMENT - PART 1: GENERIC SPECIFICATION
BS EN 60603-2:1998 Connectors for frequencies below 3 MHz for use with printed boards Detail specification for two-part connectors with assessed quality, for printed boards, for basic grid of 2,54 mm (0,1 in) with common mounting features
BS EN 61298-1:2008 Process measurement and control devices. General methods and procedures for evaluating performance General considerations
BS EN 62341-1-1:2009 Organic light emitting diode (OLED) displays Generic specifications
CEI EN 60947-4-3 : 2015 LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 4-3: CONTACTORS AND MOTOR-STARTERS - AC SEMICONDUCTOR CONTROLLERS AND CONTACTORS FOR NON-MOTOR LOADS
IEC 61045-1:1991 Fixed film resistor networks for use in electronic equipment - Part 1: Generic specification
BS EN 50286:2001 Electrical insulating protective clothing for low-voltage installations
BS EN 153000:1998 Harmonized system of quality assessment for electronic components. Generic specification: discrete pressure contact power semiconductor devices (qualification approval)
BS EN 132100:1997 Harmonized system of quality assessment for electronic components. Sectional specification: fixed mulitlayer ceramic surface mounting capacitors. Assessment levels EZ and DZ
BS EN 60938-1:2000 Fixed inductors for electromagnetic interference suppression Generic specification
BIS IS/IEC 60947-4-3 : 1999 LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 4: CONTACTORS AND MOTOR-STARTERS - SECTION 3: AC SEMICONDUCTOR CONTROLLERS AND CONTACTORS FOR NON-MOTOR LOADS
09/30207175 DC : 0 BS EN 62276 - SINGLE CRYSTAL WAFERS FOR SURFACE ACOUSTIC WAVE (SAW) DEVICE APPLICATIONS - SPECIFICATIONS AND MEASURING METHOD
06/30153438 DC : DRAFT JULY 2006 BS IEC 60539-1 ED.2 - DIRECTLY HEATED NEGATIVE TEMPERATURE COEFFICIENT THERMISTORES - PART 1: GENERIC SPECIFICATION
CEI EN 60770-2 : 2014 TRANSMITTERS FOR USE IN INDUSTRIAL-PROCESS CONTROL SYSTEMS - PART 2: METHODS FOR INSPECTION AND ROUTINE TESTING
NF EN 61076 4 100 : 2002 CONNECTORS FOR ELECTRONIC EQUIPMENT - PART 4-100: PRINTED BOARD CONNECTORS WITH ASSESSED QUALITY - DETAIL SPECIFICATION FOR TWO-PART CONNECTOR MODULES HAVING A GRID OF 2,5 MM FOR PRINTED BOARDS AND BACKPLANES
11/30234042 DC : 0 BS EN 62595-1-1 ED.1 - LCD BACKLIGHT UNIT - PART 1-1: GENERIC SPECIFICATION
04/30097421 DC : DRAFT APR 2004 IEC 60950-1 ED.2 - INFORMATION TECHNOLOGY EQUIPMENT - SAFETY - PART 1: GENERAL REQUIREMENTS
IEC 61951-1:2017 Secondary cells and batteries containing alkaline or other non-acid electrolytes - Secondary sealed cells and batteries for portable applications - Part 1: Nickel-Cadmium
13/30292163 DC : 0 BS EN 60623 - SECONDARY CELLS AND BATTERIES CONTAINING ALKALINE OR OTHER NON-ACID ELECTROLYTES - VENTED NICKEL-CADMIUM PRISMATIC RECHARGEABLE SINGLE CELLS
I.S. EN 62047-4:2010 SEMICONDUCTOR DEVICES - MICRO-ELECTROMECHANICAL DEVICES - PART 4: GENERIC SPECIFICATION FOR MEMS
I.S. EN 60947-5-1:2017 LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 5-1: CONTROL CIRCUIT DEVICES AND SWITCHING ELEMENTS - ELECTROMECHANICAL CONTROL CIRCUIT DEVICES
I.S. EN 61853-1:2011 PHOTOVOLTAIC (PV) MODULE PERFORMANCE TESTING AND ENERGY RATING - PART 1: IRRADIANCE AND TEMPERATURE PERFORMANCE MEASUREMENTS AND POWER RATING
CEI CECC 32101-804 : 2002 SPECIFICA DI DETTAGLIO: CONDENSATORI FISSI CERAMICI MULTISTRATO A MONTAGGIO SUPERFICIALE, CLASSE 1, SOTTOCLASSE 1B, TIPO CG, CATEGORIA CLIMATICA 55/125/56, LIVELLO EZ
BS EN 60603-1:2000 Connectors for frequencies below 3 MHz for use with printed boards Generic specification. General requirements and guide for the preparation of detail specifications with assessed quality
I.S. EN 60384-11:2008 FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 11: SECTIONAL SPECIFICATION - FIXED POLYETHYLENE-TEREPHTHALATE FILM DIELECTRIC METAL FOIL D.C. CAPACITORS
I.S. CECC 75301-802:1995 RECTANGULAR CONNECTORS FOR FREQUENCIES BELOW 3 MHZ, TRAPEZOIDAL SHAPED SHELLS AND ROUND CONTACTS 01 MM WITH CRIMP, SOLDER AND PRESS-IN TERMINANONS FOR PRINTED BOARDS
CSA E926 : 1998 AUXILIARIES FOR LAMPS - STARTING DEVICES (OTHER THAN GLOW STARTERS) - GENERAL AND SAFETY REQUIREMENTS
BS EN 60065 : 2014 AUDIO, VIDEO AND SIMILAR ELECTRONIC APPARATUS - SAFETY REQUIREMENTS (IEC 60065:2014, MODIFIED)
PREN 50547 : DRAFT 2011 RAILWAY APPLICATIONS - BATTERIES FOR AUXILIARY POWER SUPPLY SYSTEMS
13/30280840 DC : 0 BS EN 60758 - SYNTHETIC QUART CRYSTAL - SPECIFICATIONS AND GUIDELINES FOR THE USE
DIN EN 60926 : 2000 AUXILIARIES FOR LAMPS - STARTING DEVICES (OTHER THAN GLOW STARTERS) - GENERAL AND SAFETY REQUIREMENTS
CEI EN 62341-1-1 : 2011 ORGANIC LIGHT EMITTING DIODE (OLED) DISPLAYS - PART 1-1: GENERIC SPECIFICATIONS
02/208614 DC : DRAFT AUG 2002 IEC 60966-2-2 ED.2 - RADIO FREQUENCY AND COAXIAL CABLE ASSEMBLIES - PART 2-2: BLANK DETAIL SPECIFICATION FOR FLEXIBLE COAXIAL CABLE ASSEMBLIES
BS CECC 25100(1977) : 1977 AMD 7577 HARMONIZED SYSTEM OF QUALITY ASSESSMENT FOR ELECTRONIC COMPONENTS: SECTIONAL SPECIFICATION: MAGNETIC OXIDE CORES FOR INDUCTOR APPLICATIONS
03/108947 DC : DRAFT MAY 2003 IEC 60758 ED.3 - SYNTHETIC QUARTZ CRYSTAL - SPECIFICATIONS AND GUIDE TO THE USE
DIN EN 138000 : 1997 GENERIC SPECIFICATION; FIXED INDUCTORS FOR ELECTROMAGNETIC INTERFERENCE SUPPRESSION (INDUCTORS FOR WHICH SAFETY TESTS ARE REQUIRED)
BS EN 62319-1:2005 Polymeric thermistors. Directly heated positive step function temperature coefficient Generic specification
I.S. EN 114000:1994 GENERIC SPECIFICATION: PHOTOMULTIPLIER TUBES
15/30325282 DC : 0 BS EN 62884-1 - MEASUREMENT TECHNIQUES OF PIEZOELECTRIC, DIELETIRIC AND ELECTROSTATIC OSCILLATORS - PART 1: BASIC METHODS FOR THE MEASUREMENT
13/30286163 DC : 0 BS EN 62435-2 - ELECTRONIC COMPONENTS - LONG-TERM STORAGE OF ELECTRONIC SEMICONDUCTOR DEVICES - PART 2 - DETERIORATION MECHANISMS
BS EN 60384-26-1:2010 Fixed capacitors for use in electronic equipment Blank detail specification. Fixed aluminum electrolytic capacitors with conductive polymer solid electrolyte. Assessment level EZ
BS EN 134100:1996 Harmonized system of quality assessment for electronic components. Sectional specification: variable capacitors (Qualification approval)
BS 7415(1991) : 1991 AMD 7674 SPECIFICATION FOR TIME SWITCHES FOR TARIFF AND LOAD CONTROL
BS CECC 00111-3:1991 Rule of Procedure 11. Specifications Regulations for CECC Specifications for components for general and professional (civil and military) usage (excluding detail specifications)
00/201724 DC : DRAFT APR 2000 IEC 61076-1 - CONNECTORS - PRODUCT REQUIREMENTS - PART 1: GENERIC SPECIFICATION
PD IEC/PAS 62276:2002 Single crystal wafers applied for surface acoustic wave device. Specification and measuring method
BS IEC 62679-1-1:2014 Electronic paper displays Terminology
I.S. EN 125000:1999 CORES MADE FROM FERRITE MATERIALS (GENERIC SPECIFICATION)
09/30158428 DC : 0 BS EN 61951-2 - SECONDARY CELLS AND BATTERIES CONTAINING ALKALINE OR OTHER NON-ACID ELECTROLYTES - PORTABLE SEALED RECHARGEABLE SINGLE CELLS - PART 2: NICKEL-METAL HYDRIDE
BS EN 61076-3-100:2000 Connectors for use in d.c., low-frequency analogue and digital high-speed data applications Rectangular connectors with assessed quality - Detail specification for a range of shielded connectors with trapezoidal-shaped shells and non-removable ribbon contacts on a 1,27 mm double row
BS CECC68101(1990) : 90 AMD 9619 HARMONIZED SYSTEM OF QUALITY ASSESSMENT FOR ELECTRONIC COMPONENTS: BLANK DETAIL SPECIFICATION: QUARTZ CRYSTAL UNITS (CAPABILITY APPROVAL)
BS EN 61358:1996 Acceptance inspection for direct connected alternating current static watt-hour meters for active energy (classes 1 and 2)
CEI EN 62093 : 2005 BALANCE-OF-SYSTEM COMPONENTS FOR PHOTOVOLTAIC SYSTEMS - DESIGN QUALIFICATION NATURAL ENVIRONMENTS
BS EN 60939-1:2010 Passive filter units for electromagnetic interference suppression Generic specification
I.S. 604:1984 COLD CATHODE INDICATOR TUBES (GENERIC SPECIFICATION)
BS EN 133200:1999 Harmonized system of quality assessment for electronic components. Sectional specification:passive filter units for electromagnetic interference suppression (filters for which safety tests are required)
BS EN 61978-1:2014 Fibre optic interconnecting devices and passive components. Fibre optic passive chromatic dispersion compensators Generic specification
CEI EN 61646 : 2012 THIN-FILM TERRESTRIAL PHOTOVOLTAIC (PV) MODULES - DESIGN QUALIFICATION AND TYPE APPROVAL
CEI EN 62259 : 2005 SECONDARY CELLS AND BATTERIES CONTAINING ALKALINE OR OTHER NON-ACID ELECTROLYTES - NICKEL-CADMIUM PRISMATIC SECONDARY SINGLE CELLS WITH PARTIAL GAS RECOMBINATION
CEI EN 133100 : 1999 SECTIONAL SPECIFICATION: PASSIVE FILTER UNITS FOR ELECTROMAGNETIC INTERFERENCE SUPPRESSION - FILTERS FOR WHICH SAFETY TESTS ARE NOT REQUIRED
CEI EN 60876-1 : 2015 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - FIBRE OPTIC SPATIAL SWITCHES - PART 1: GENERIC SPECIFICATION
BS EN 61248-1:1997 Transformers and inductors for use in electronic and telecommunication equipment Generic specification
I.S. EN 60875-1:2015 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - NON-WAVELENGTH-SELECTIVE FIBRE OPTIC BRANCHING DEVICES - PART 1: GENERIC SPECIFICATION
13/30286159 DC : 0 BS EN 62435-1 - ELECTRONIC COMPONENTS - LONG-TERM STORAGE OF ELECTRONIC SEMICONDUCTOR DEVICES - PART 1: GENERAL
02/208649 DC : DRAFT AUG 2002 IEC 60966-4-1 ED.2 - RADIO FREQUENCY AND COAXIAL CABLE ASSEMBLIES - PART 4-1: BLANK DETAIL SPECIFICATION FOR SEMI-RIGID COAXIAL CABLE ASSEMBLIES
BS EN 60921:2004 Ballasts for tubular fluorescent lamps. Performance requirements
BS EN 61049:1993 Specification for capacitors for use in tubular fluorescent and other discharge lamp circuits. Performance requirements
BS EN 60539-1:2016 Directly heated negative temperature coefficient thermistors Generic specification
BS QC 160100:1987 Harmonized system of quality assessment for electronic components. Electrical relays. Sectional specification: electromechanical all-or-nothing relays
BS EN 61076-4-101:2001 Connectors for electronic equipment Printed board connectors with assessed quality. Detail specification for two-part connector modules, having a basic grid of 2,0 mm for printed boards and backplanes in accordance with IEC 60917
BS EN 60738-1-2:2008 Thermistors. Directly heated positive step-function temperature coefficient Blank detail specification. Heating element application. Assessment level EZ
BS CECC 12000(1981) : 1981 AMD 9605 HARMONIZED SYSTEM OF QUALITY ASSESSMENT FOR ELECTRONIC COMPONENTS - GENERIC SPECIFICATION - IMAGE CONVERTER & IMAGE INTENSIFIER TUBES
I.S. EN 140210:1994 FIXED POWER RESISTORS - CAPABILITY APPROVAL (SECTIONAL SPECIFICATION)
14/30297129 DC : 0 BS EN 60086-1 - PRIMARY BATTERIES - PART 1: GENERAL
10/30218217 DC : 0 BS EN 61314-1-1 - FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - FIBRE OPTIC FAN-OUTS - PART 1-1: BLANK DETAIL SPECIFICATION
13/30286167 DC : 0 BS EN 62435-5 - ELECTRONIC COMPONENTS - LONG-TERM STORAGE OF ELECTRONIC SEMICONDUCTOR DEVICES - PART 5 - DIE & WAFER DEVICES
CEI EN 60384-11 : 2008 FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 11: SECTIONAL SPECIFICATION - FIXED POLYETHYLENE-TEREPHTHALATE FILM DIELECTRIC METAL FOIL D.C. CAPACITORS
CEI EN 60384-9-1 : 2005 FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 9-1: BLANK DETAIL SPECIFICATION: FIXED CAPACITORS OF CERAMIC DIELECTRIC, CLASS 2 - ASSESSMENT LEVEL EZ
13/30292154 DC : 0 BS EN 61951-2 - SECONDARY CELLS AND BATTERIES CONTAINING ALKALINE OR OTHER NON ACID ELECTROLYTES - SECONDARY SEALED CELLS AND BATTERIES FOR PORTABLE APPLICATIONS - PART 2: NICKEL-METAL HYDRIDE
BS CECC 31701:1988 Specification for harmonized system of quality assessment for electronic components. Blank detail specification: fixed capacitors for direct current with electrodes of thin metal foils and a polycarbonate film dielectric
NF EN 60384-11 : 2013 FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 11: SECTIONAL SPECIFICATION - FIXED POLYETHYLENE-TEREPHTHALATE FILM DIELECTRIC METAL FOIL D.C. CAPACITORS
03/104227 DC : DRAFT MAY 2003 IEC 60393-6 ED.1 - POTENTIOMETERS FOR USE IN ELECTRONIC EQUIPMENT - PART 6: SECTIONAL SPECIFICATION - SURFACE MOUNT PRESET POTENTIOMETERS
03/104580 DC : DRAFT MAR 2003 IEC 60384-9 - FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 9: SECTIONAL SPECIFICATION - FIXED CAPACITORS OF CERAMIC DIELECTRIC, CLASS 2
06/30155911 DC : DRAFT SEP 2006 BS EN 140401-801 - DETAIL SPECIFICATION - FIXED LOW POWER FILM SMD RESISTORS - RECTANGULAR - STABILITY CLASSES 0,1; 0,25; 0,5; 1
BS EN 60384-1:2016 Fixed capacitors for use in electronic equipment Generic specification
BS EN 60255-23:1997 Electrical relays Contact performance
NF EN 62341-1-1 : 2010 ORGANIC LIGHT EMITTING DIODE (OLED) DISPLAYS - PART 1-1: GENERIC SPECIFICATIONS
CSA E432.2 : 1998 : INC : UPD 1 : 1998 : R2012 SAFETY SPECIFICATIONS FOR INCANDESCENT LAMPS - TUNGSTEN HALOGEN LAMPS FOR DOMESTIC AND SIMILAR GENERAL LIGHTING PURPOSES
02/206102 DC : DRAFT MAY 2002 IEC 60384-21, ED.1 - FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 21: SECTIONAL SPECIFICATION - FIXED SURFACE MOUNT MULTILAYER CAPACITORS OF CERAMIC DIELECTRIC - CLASS 1 - ASSESSMENT LEVEL EZ
BS EN 60384-13-1:2006 Fixed capacitors for use in electronic equipment Blank detail specification. Fixed polypropylene film dielectric metal foil d.c. capacitors. Assessment level E and EZ
BS EN 62259:2004 Secondary cells and batteries containing alkaline or other non-acid electrolytes. Nickel-cadmium prismatic secondary single cells with partial gas recombination
02/209130 DC : DRAFT JAN 2003 IEC 61811-10 ED.1 - ELECTROMECHANICAL ELEMENTARY RELAYS OF ASSESSED QUALITY - PART 10: SECTIONAL SPECIFICATION - RELAYS FOR INDUSTRIAL APPLICATION
05/30132097 DC : DRAFT JUNE 2005 IEC 60679-1 ED 3 - QUARTZ CRYSTAL CONTROLLED OSCILLATORS OF ASSESSED QUALITY - PART 1: GENERIC SPECIFICATION
BS EN 61051-1:2008 Varistors for use in electronic equipment Generic specification
03/315066 DC : DRAFT OCT 2003 IEC 62384 ED. 1 - PERFORMANCE OF CONTROLGEAR FOR LED MODULES D.C. OR A.C. SUPPLIED ELECTRONIC CONTROLGEARS FOR LED MODULES - PERFORMANCE REQUIREMENTS
BS QC010000(1993) : AMD 10432 HARMONIZED SYSTEM OF QUALITY ASSESSMENT FOR ELECTRONIC COMPONENTS. CONNECTORS FOR FREQUENCIES BELOW 3 MHz FOR USE WITH PRINTED BOARDS - GENERIC SPECIFICATION: GENERAL REQUIREMENTS AND GUIDE FOR THE PREPARATION OF DETAIL SPECIFICATIONS, WITH ASSESSED QUALITY
NF EN 60947-4-3 : 2014 LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 4-3: CONTACTORS AND MOTOR-STARTERS - AC SEMICONDUCTOR CONTROLLERS AND CONTACTORS FOR NON-MOTOR LOADS
02/208613 DC : DRAFT AUG 2002 IEC 60966-2-1 ED.2 - RADIO FREQUENCY AND COAXIAL CABLE ASSEMBLIES - PART 2-1: SECTIONAL SPECIFICATION FOR FLEXIBLE COAXIAL CABLE ASSEMBLIES
I.S. EN 60384-17:2005 FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 17: SECTIONAL SPECIFICATION: FIXED METALLIZED POLYPROPYLENE FILM DIELECTRIC A.C. AND PULSE CAPACITORS
BS EN 140101:2008 Blank Detail Specification. Fixed low power film resistors
BS EN 119000:1997 Harmonized system of quality assessment for electronic components. Generic specification: dry and mercury wetted reed contact units
IEC 61253-2-1:1993 Piezoelectric ceramic resonators - A specification in the IEC quality assessment system for electronic components (IECQ) - Part 2: Sectional specification - Qualification approval - Section 1: Blank detail specification - Assessment level E
CEI EN 60384-18-1 : 2009 FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 18-1: BLANK DETAIL SPECIFICATION - FIXED ALUMINIUM ELECTROLYTIC SURFACE MOUNT CAPACITORS WITH SOLID (MNO[2]) ELECTROLYTE - ASSESSMENT LEVEL EZ
BS CECC43003(1984) : 1984 AMD 7380 SPECIFICATION FOR HARMONIZED SYSTEM OF QUALITY ASSESSMENT FOR ELECTRONIC COMPONENTS - BLANK DETAIL SPEC - DIRECTLY HEATED NEGATIVE TEMPERATURE COEFFICIENT THERMISTORS (DISC TYPE)
03/100395 DC : DRAFT APR 2003 EN 175101-809 - DETAIL SPECIFICATION - TWO-PART CONNECTORS FOR PRINTED BOARDS HAVING A GRID OF 2,54 MM, SHORT VERSION IN COMPLIANCE WITH CECC 75 101-801, WITH ASSESSED QUALITY
01/205810 DC : DRAFT AUG 2001 IEC 61215 ED.2.0 - CRYSTALLINE SILICON TERRESTRIAL PHOTOVOLTAIC (PV) MODULES - DESIGN QUALIFICATION AND TYPE APPROVAL
BS EN 60738-1-1:2008 Thermistors. Directly heated positive step-function temperature coefficient Blank detail specification. Current limiting application. Assessment level EZ
02/202649 DC : DRAFT JAN 2002 IEC PAS 61076-3-111. ED.1 - CONNECTORS FOR USE IN ELECTRONIC EQUIPMENT - PART 3-111: DETAIL SPECIFICATION FOR 8-WAY, SHIELDED AND UNSHIELDED, FREE AND FIXED CONNECTORS, FOR INDUSTRIAL ENVIRONMENTS FOR FREQUENCIES UP TO 250 MHZ
IEC 61073-3:1993 Splices for optical fibres and cables - Part 3: Sectional specification - Fusion splices for optical fibres and cables
BS CECC68000(1990) : AMD 9184 HARMONIZED SYSTEM OF QUALITY ASSESSMENT FOR ELECTRONIC COMPONENTS: GENERIC SPECIFICATION: QUARTZ CRYSTAL UNITS
UNE-EN 50547:2013 Railway applications - Batteries for auxiliary power supply systems
CEI EN 61076-2-102 : 2003 CONNECTORS FOR ELECTRONIC EQUIPMENT - PART 2-102: CIRCULAR CONNECTORS WITH ASSESSED QUALITY - DETAIL SPECIFICATION FOR PLUGS AND JACKS FOR EXTERNAL LOW VOLTAGE POWER SUPPLY
CSA E61951-2 : 2014 SECONDARY CELLS AND BATTERIES CONTAINING ALKALINE OR OTHER NON-ACID ELECTROLYTES - PORTABLE SEALED RECHARGEABLE SINGLE CELLS - PART 2: NICKEL-METAL HYDRIDE
IEC 60255-23:1994 Electrical relays - Part 23: Contact performance
I.S. EN 62319-1-1:2005 POLYMERIC THERMISTORS - DIRECTLY HEATED POSITIVE STEP FUNCTION TEMPERATURE COEFFICIENT - PART 1-1: BLANK DETAIL SPECIFICATION CURRENT LIMITING APPLICATION
I.S. 1107:1991 LEAD SCREW ACTUATED PRESET POTENTIOMETERS - SQUARE FORMS (DETAIL SPECIFICATION)
I.S. EN 61199:2011 SINGLE-CAPPED FLUORESCENT LAMPS - SAFETY SPECIFICATIONS
BIS IS 16170-1 : 2014 PHOTOVOLTAIC (PV) MODULE PERFORMANCE TESTING AND ENERGY RATING - PART 1: IRRADIANCE AND TEMPERATURE PERFORMANCE MEASUREMENTS AND POWER RATING
IEC PAS 62435:2005 Electronic components - Long-duration storage of electronic components - Guidance for implementation
CEI EN 50321 : 2000 ELECTRICALLY INSULATING FOOTWEAR FOR WORKING ON LOW VOLTAGE INSTALLATIONS
CEI EN 60384-17 : 2006 FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 17: SECTIONAL SPECIFICATION: FIXED METALLIZED POLYPROPYLENE FILM DIELECTRIC A.C. AND PULSE CAPACITORS
CEI EN 60188 : 2002 HIGH PRESSURE MERCURY VAPOUR LAMPS - PERFORMANCE SPECIFICATIONS
CEI EN 61853-1 : 2013 PHOTOVOLTAIC (PV) MODULE PERFORMANCE TESTING AND ENERGY RATING - PART 1: IRRADIANCE AND TEMPERATURE PERFORMANCE MEASUREMENTS AND POWER RATING
I.S. EN 61051-1:2008 VARISTORS FOR USE IN ELECTRONIC EQUIPMENT - PART 1: GENERIC SPECIFICATION
CEI EN 130100 : 1998 SECTIONAL SPECIFICATION - FIXED POLYETHYLENE-TEREPHTALATE FILM DIELECTRIC METAL FOIL CAPACITORS FOR DIRECT CURRENT
CEI EN 60384-13 : 2013 FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 13: SECTIONAL SPECIFICATION - FIXED POLYPROPYLENE FILM DIELECTRIC METAL FOIL D.C. CAPACITORS
I.S. EN 61195:2003 DOUBLE-CAPPED FLUORESCENT LAMPS - SAFETY SPECIFICATIONS
I.S. EN 60738-1-4:2008 THERMISTORS - DIRECTLY HEATED POSITIVE STEP-FUNCTION TEMPERATURE COEFFICIENT - PART 1-4: BLANK DETAIL SPECIFICATION - SENSING APPLICATION - ASSESSMENT LEVEL EZ
EN 62077:2016 Fibre optic interconnecting devices and passive components - Fibre optic circulators - Generic specification
OVE/ONORM EN 61051-1 : 2009 VARISTORS FOR USE IN ELECTRONIC EQUIPMENT - PART 1: GENERIC SPECIFICATION
I.S. EN 60127-5:2017 MINIATURE FUSES - PART 5: GUIDELINES FOR QUALITY ASSESSMENT OF MINIATURE FUSE-LINKS
I.S. EN 50547:2013 RAILWAY APPLICATIONS - BATTERIES FOR AUXILIARY POWER SUPPLY SYSTEMS
I.S. EN 61048:2006 AUXILIARIES FOR LAMPS - CAPACITORS FOR USE IN TUBULAR FLUORESCENT AND OTHER DISCHARGE LAMP CIRCUITS - GENERAL AND SAFETY REQUIREMENTS
BS EN 60947-4-3:2014 Low-voltage switchgear and controlgear Contactors and motor-starters. AC semiconductor controllers and contactors for non-motor loads
BS EN 60929 : 2011 AC AND/OR DC-SUPPLIED ELECTRONIC CONTROL GEAR FOR TUBULAR FLUORESCENT LAMPS - PERFORMANCE REQUIREMENTS
I.S. EN 62077:2016 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - FIBRE OPTIC CIRCULATORS - GENERIC SPECIFICATION
BS EN 60947-2:2017 Low-voltage switchgear and controlgear Circuit-breakers
CEI EN 61076-4-111 : 2003 CONNECTORS FOR ELECTRONIC EQUIPMENT PART 4-111: PRINTED BOARD CONNECTORS WITH ASSESSED QUALITY - DETAIL SPECIFICATION FOR TWO-PART POWER CONNECTOR MODULES, FOR PRINTED BOARDS AND BACKPLANES HAVING EARLY MATING FEATURES, AND HAVING A BASIC GRID OF 2,5 MM IN ACCORDANCE WITH IEC 60917-1
I.S. EN 60947-4-2:2012 LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 4-2: CONTACTORS AND MOTOR-STARTERS - AC SEMICONDUCTOR MOTOR CONTROLLERS AND STARTERS
IEC 60723-5-1:1993 Inductor and transformer cores for telecommunications - Part 5: Sectional specification: Adjusters used with magnetic oxide cores for use in adjustable inductors and transformers - Section 1: Blank detail specification. Assessment level A
NF EN 60738-1-4 : 2014 THERMISTORS - DIRECTLY HEATED POSITIVE STEP-FUNCTION TEMPERATURE COEFFICIENT - PART 1-4: BLANK DETAIL SPECIFICATION - SENSING APPLICATION - ASSESSMENT LEVEL EZ
NF EN 60947-8 : 2003 AMD 2 2012 LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 8: CONTROL UNITS FOR BUILT-IN THERMAL PROTECTION (PTC) FOR ROTATING ELECTRICAL MACHINES
CEI CECC 32101-805 : 2002 DETAIL SPECIFICATION: FIXED MULTILAYER CERAMIC SURFACE MOUNTING CAPACITORS, CLASS 2, SUB-CLASSES 2C1 AND 2R1, CLIMATIC CATEGORY 55/125/56, ASSESSMENT LEVEL EZ, WITH FAILURE RATE LEVELS
I.S. EN 61248-1:1998 TRANSFORMERS AND INDUCTORS FOR USE IN ELECTRONIC AND TELECOMMUNICATION EQUIPMENT - PART 1: GENERIC SPECIFICATION
I.S. EN 62246-1-1:2013 REED SWITCHES - PART 1-1: GENERIC SPECIFICATION - QUALITY ASSESSMENT (IEC 62246-1-1:2013 (EQV))
IEC 60810:2017 Lamps, light sources and LED packages for road vehicles - Performance requirements
IEC 60968:2015 Self-ballasted fluorescent lamps for general lighting services - Safety requirements
NF EN 60939-1 : 2011 PASSIVE FILTER UNITS FOR ELECTROMAGNETIC INTERFERENCE SUPPRESSION - PART 1: GENERIC SPECIFICATION
IEC 61253-1:1993 Piezoelectric ceramic resonators - A specification in the IEC quality assessment system for electronic components (IECQ) - Part 1: Generic specification - Qualification approval
NF EN 175201-804 : 2014 DETAIL SPECIFICATION - CIRCULAR CONNECTORS - ROUND CONTACTS, SIZE DIAMETER, 1.6 MM, THREADED COUPLING
UNE-EN 60968:2015 Self-ballasted fluorescent lamps for general lighting services - Safety requirements
NF EN 130200 : 2015 AMD 3 2015 SECTIONAL SPECIFICATION: FIXED TANTALUM CAPACITORS WITH NON-SOLID OR SOLID ELECTROLYTE
I.S. EN 61076-4-103:1999 CONNECTORS FOR USE IN D.C. LOW-FREQUENCY ANALOGUE AND DIGITAL HIGH SPEED DATA APPLICATIONS - PART 4-103: PRINTED BOARD CONNECTORS WITH ASSESSED QUALITY - DETAIL SPECIFICATION FOR TWO-PART CONNECTORS WITH SHIELDING AND A BASIC GRID OF 2.5 MM
I.S. EN 60546-2:2010 CONTROLLERS WITH ANALOGUE SIGNALS FOR USE IN INDUSTRIAL-PROCESS CONTROL SYSTEMS - PART 2: GUIDANCE FOR INSPECTION AND ROUTINE TESTING
IEC 61051-2:1991 Varistors for use in electronic equipment - Part 2: Sectional specification for surge suppression varistors
I.S. EN 61248-7:1998 TRANSFORMERS AND INDUCTORS FOR USE IN ELECTRONIC AND TELECOMMUNICATION EQUIPMENT - PART 7: SECTIONAL SPECIFICATION FOR HIGH-FREQUENCY INDUCTORS AND INTERMEDIATE FREQUENCY TRANSFORMERS ON THE BASIS OF THE CAPABILITY APPROVAL PROCEDURE
I.S. EN 129200:1994 SECTIONAL SPECIFICATION: FIXED INDUCTORS WITH CERAMIC OR FERRITE CORE WOUND WITH COPPER WIRE FOR RF CIRCUITS
I.S. EN 60939-1:2010 PASSIVE FILTER UNITS FOR ELECTROMAGNETIC INTERFERENCE SUPPRESSION - PART 1: GENERIC SPECIFICATION
I.S. EN 61215:2005 CRYSTALLINE SILICON TERRESTRIAL PHOTOVOLTAIC (PV) MODULES - DESIGN QUALIFICATION AND TYPE APPROVAL
EN 60384-19-1:2006/corrigendum Nov. 2006 FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 19-1: BLANK DETAIL SPECIFICATION - FIXED METALLIZED POLYETHYLENE-TEREPHTHALATE FILM DIELECTRIC SURFACE MOUNT D.C. CAPACITORS - ASSESSMENT LEVEL EZ
IEC 60384-17:2005 Fixed capacitors for use in electronic equipment - Part 17: Sectional specification: Fixed metallized polypropylene film dielectric a.c. and pulse capacitors
IEC 62319-1:2005 Polymeric thermistors - Directly heated positive step function temperature coefficient - Part 1: Generic specification
IEC 61076-4-111:2002 Connectors for electronic equipment - Part 4-111: Printed board connectors with assessed quality - Detail specification for two-part power connector modules, for printed boards and backplanes having early mating features, and having a basic grid of 2,5 mm in accordance with IEC 60917-1
BS CECC 11000(1980) : 1980 AMD 7600 HARMONIZED SYSTEM OF QUALITY ASSESSMENT FOR ELECTRONIC COMPONENTS - GENERIC SPECIFICATION - CATHODE RAY TUBES
IEC 60432-2:1999+AMD1:2005+AMD2:2012 CSV Incandescent lamps - Safety specifications - Part 2: Tungsten halogen lamps for domestic and similar general lighting purposes
IEC 61037:1990+AMD1:1996+AMD2:1998 CSV Electricity metering - Tariff and load control - Particular requirements for electronic ripple control receivers
EN 61076-5 : 2001 CONNECTORS FOR USE IN D.C., LOW-FREQUENCY ANALOGUE AND DIGITAL HIGH-SPEED DATA APPLICATIONS - PART 5: IN-LINE SOCKETS WITH ASSESSED QUALITY - SECTIONAL SPECIFICATION
EN 60738-1-3:2008 Thermistors - Directly heated positive step-function temperature coefficient - Part 1-3: Blank detail specification - Inrush current application - Assessment level EZ
EN 60738-1-1:2008 Thermistors - Directly heated positive step-function temperature coefficient - Part 1-1: Blank detail specification - Current limiting application - Assessment level EZ
EN 125000:1997 Generic Specification: Cores made of ferrite materials
IEC 60384-1:2016 RLV Fixed capacitors for use in electronic equipment - Part 1: Generic specification
EN 175301-801:2006 Detail Specification: High density rectangular connectors, round removable crimp contacts
NF EN 60384-16 : 2006 FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 16: SECTIONAL SPECIFICATION: FIXED METALLIZED POLYPROPYLENE FILM DIELECTRIC D.C. CAPACITORS
EN 62496-1:2009 Optical circuit boards - Part 1: General
EN 130300:1998 Sectional Specification: Aluminium electrolytic capacitors with solid and non-solid electrolyte
EN 60384-18-1:2007 Fixed capacitors for use in electronic equipment - Part 18-1: Blank detail specification - Fixed aluminium electrolytic surface mount capacitors with solid (MnO2) electrolyte - Assessment level EZ
EN 60384-26-1:2010 Fixed capacitors for use in electronic equipment - Part 26-1: Blank detail specification - Fixed aluminum electrolytic capacitors with conductive polymer solid electrolyte - Assessment level EZ
EN 62197-1 : 2006 CONNECTORS FOR ELECTRONIC EQUIPMENT - QUALITY ASSESSMENT REQUIREMENTS - PART 1: GENERIC SPECIFICATION
EN 130100:1997 Sectional Specification: Fixed polyethylene-terephtalate film dielectric metal foil capacitors for direct current
EN 60738-1-2:2008 Thermistors - Directly heated positive step-function temperature coefficient - Part 1-2: Blank detail specification - Heating element application - Assessment level EZ
EN 61076-4-101:2001 Connectors for electronic equipment - Part 4-101: Printed board connectors with assessed quality - Detail specification for two-part connector modules, having a basic grid of 2,0 mm for printed boards and backplanes in accordance with IEC 60917
EN 61076-4-108:2002 Connectors for electronic equipment - Part 4-108: Printed board connectors with assessed quality - Detail specification for cable-to-board connectors, with a modular pitch of 25 mm and integrated shielding function, applicable for transverse packing density of 15 mm, having a basic grid of 2,5 mm in accordance with IEC 60917-1
EN 60623:2017 Secondary cells and batteries containing alkaline or other non-acid electrolytes - Vented nickel-cadmium prismatic rechargeable single cells
EN 153000:1998 Generic specification: Discrete pressure contact power semiconductor devices (Qualification approval)
EN 160100 : 1997 CAPABILITY APPROVAL OF MANUFACTURERS OF PRINTED BOARD ASSEMBLIES OFASSESSED QUALITY (SECTIONAL SPECIFICATION)
EN 60947-4-3:2014 Low-voltage switchgear and controlgear - Part 4-3: Contactors and motor-starters - AC semiconductor controllers and contactors for non-motor loads
EN 60810 : 2018 LAMPS, LIGHT SOURCES AND LED PACKAGES FOR ROAD VEHICLES - PERFORMANCE REQUIREMENTS
EN 137100:1995 Sectional Specification: Fixed aluminium electrolytic a.c. capacitors with non-solid electrolyte for motor starter applications - Qualification approval
EN 60832:1996 Insulating poles (insulating sticks) and universal tool attachments (fittings) for live working
EN 62259:2004 Secondary cells and batteries containing alkaline or other non-acid electrolytes - Nickel-cadmium prismatic secondary single cells with partial gas recombination
EN 61314-1:2012 Fibre optic interconnecting devices and passive components - Fibre optic fan-outs - Part 1: Generic specification
EN 196000 : 92 AMD 1 2001 HARMONIZED SYSTEM OF QUALITY ASSESSMENT FOR ELECTRONIC COMPONENTS - GENERIC SPECIFICATION: ELECTROMECHANICAL SWITCHES
EN 62134-1:2009 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - FIBRE OPTIC CLOSURES - PART 1: GENERIC SPECIFICATION
EN 62035:2014 Discharge lamps (excluding fluorescent lamps) - Safety specifications
EN 60966-3:2009 Radio frequency and coaxial cable assemblies - Part 3: Sectional specification for semi-flexible coaxial cable assemblies
EN 134000:1994 Generic Specification: Variable capacitors (Qualification approval and capability approval)
EN 62675:2014 Secondary cells and batteries containing alkaline or other non-acid electrolytes - Sealed nickel-metal hydride prismatic rechargeable single cells
EN 60968:2015 Self-ballasted fluorescent lamps for general lighting services - Safety requirements
EN 61811-10:2003 Electromechanical elementary relays of assessed quality - Part 10: Sectional specification - Relays for industrial application
EN 133200:1999 Sectional Specification: Passive filter units for electromagnetic interference suppression (Filters for which safety tests are required)
EN 61248-2:1997 Transformers and inductors for use in electronic and telecommunication equipment - Part 2: Sectional specification for signal transformers on the basis of the capability approval procedure
EN 60539-2:2004/A1:2010 DIRECTLY HEATED NEGATIVE TEMPERATURE COEFFICIENT THERMISTORS - PART 2: SECTIONAL SPECIFICATION - SURFACE MOUNT NEGATIVE TEMPERATURE COEFFICIENT THERMISTORS
EN 62391-2-1:2006 Fixed electric double-layer capacitors for use in electronic equipment - Part 2-1: Blank detail specification - Electric-double layer capacitors for power application - Assessment level EZ
EN 60738-1-4:2008 Thermistors - Directly heated positive step-function temperature coefficient - Part 1-4: Blank detail specification - Sensing application - Assessment level EZ
EN 60939-1:2010 PASSIVE FILTER UNITS FOR ELECTROMAGNETIC INTERFERENCE SUPPRESSION - PART 1: GENERIC SPECIFICATION
EN 61215:2005 Crystalline silicon terrestrial photovoltaic (PV) modules - Design qualification and type approval
EN 60947-4-2:2012 Low-voltage switchgear and controlgear - Part 4-2: Contactors and motor-starters - AC semiconductor motor controllers and starters
EN 61076-4-105:1998 Connectors with assessed quality, for use in d.c., low frequency analogue and in digital high-speed data applications - Part 4: Printed board connectors - Section 105: Detail specification for 9 mm circular connector with 3 to 8 contacts for use in a wide range of applications including the telecommunication and audio industry
EN 60947-8:2003/A2:2012 LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 8: CONTROL UNITS FOR BUILT-IN THERMAL PROTECTION (PTC) FOR ROTATING ELECTRICAL MACHINES (IEC 60947-8:2003/A2:2011)
EN 140101:2008 Blank Detail Specification: Fixed low power film resistors
EN 61235:1995 Live working - Insulating hollow tubes for electrical purposes
EN 50286:1999/corrigendum:2004 ELECTRICAL INSULATING PROTECTIVE CLOTHING FOR LOW-VOLTAGE INSTALLATIONS
CLC/TS 50466:2006 Long duration storage of electronic components - Specification for implementation
EN 60603-13:1998 Connectors for frequencies below 3 MHz for use with printed boards - Part 13: Detail specification for two-part connectors of assessed quality, for printed boards for basic grid of 2,54 mm (0,1 in), with free connectors for non-accessible insulation displacement terminations (ID)
EN 61204-6:2001 Low-voltage power supplies, DC output - Part 6: Requirements for low-voltage power supplies of assessed performance
EN 61358:1996 Acceptance inspection for direct connected alternating current static watt-hour meters for active energy (classes 1 and 2)
EN 129000:1993/A1:1995 GENERIC SPECIFICATION - FIXED RF WOUND INDUCTORS
EN 60546-2:2010 Controllers with analogue signals for use in industrial-process control systems - Part 2: Guidance for inspection and routine testing
EN 61436 : 1998 SECONDARY CELLS AND BATTERIES CONTAINING ALKALINE OR OTHER NON-ACID ELECTROLYTES - SEALED NICKEL-METAL HYDRIDE RECHARGEABLE SINGLE CELLS
EN 61199:2011/A2:2015 SINGLE-CAPPED FLUORESCENT LAMPS - SAFETY SPECIFICATIONS (IEC 61199:2011/A2:2014)
EN 60662:2012 High-pressure sodium vapour lamps - Performance specifications
EN 61051-1:2008 Varistors for use in electronic equipment - Part 1: Generic specification
EN 60947-4-1 : 2010 AMD 1 2012 LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 4-1: CONTACTORS AND MOTOR-STARTERS - ELECTROMECHANICAL CONTACTORS AND MOTOR-STARTERS (IEC 60947-4-1:2009/A1:2012)
EN 60926:1996/A1:1999 AUXILIARIES FOR LAMPS - STARTING DEVICES (OTHER THAN GLOW STARTERS) - GENERAL AND SAFETY REQUIREMENTS
EN 60758:2016 Synthetic quartz crystal - Specifications and guidelines for use
EN 60738-1:2006/A1:2009 THERMISTORS - DIRECTLY HEATED POSITIVE TEMPERATURE COEFFICIENT - PART 1: GENERIC SPECIFICATION
EN 61076-4-103:1999 Connectors for use in d.c. low-frequency analogue and digital high speed data applications - Part 4-103: Printed board connectors with assessed quality - Detail specification for two-part connectors with shielding and a basic grid of 2,5 mm
EN 62435-1:2017 Electronic components - Long-term storage of electronic semiconductor devices - Part 1: General
EN 61076-4-102:1997 Connectors with assessed quality, for use in d.c., low-frequency analogue and in digital high speed data applications - Part 4: Printed board connectors - Section 102: Detail specification for two-part single-pole connectors, for multiple uses on plug-in units, with pre-centring, coding and early mating features, having a metric grid in accordance with IEC 60917
EN 175500:1997 Sectional specification: Cable outlet accessories for connectors, including qualification approval and capability approval
EN 60874-1:2012 Fibre optic interconnecting devices and passive components - Connectors for optical fibres and cables - Part 1: Generic specification
EN 129100 : 93 AMD 1 95 SECTIONAL SPECIFICATION: WIREWOUND SURFACE MOUNTING INDUCTORS
EN 60966-4:2003 Radio frequency and coaxial cable assemblies - Part 4: Sectional specification for semi-rigid coaxial cable assemblies
EN 61076-3-101:1997 Connectors with assessed quality, for use in d.c. low-frequency analogue and in digital high-speed data applications - Part 3: Rectangular connectors - Section 101: Detail specification for a range of shielded connectors with trapezoidal shaped shells and non-removable rectangular contacts on a 1,27 mm x 2,54 mm centre-line
EN 61730-2:2007/A1:2012 PHOTOVOLTAIC (PV) MODULE SAFETY QUALIFICATION - PART 2: REQUIREMENTS FOR TESTING (IEC 61730-2:2004/A1:2011)
EN 61298-1:2008 PROCESS MEASUREMENT AND CONTROL DEVICES - GENERAL METHODS AND PROCEDURES FOR EVALUATING PERFORMANCE - PART 1: GENERAL CONSIDERATIONS
EN 131800:1997 Sectional Specification: Fixed polypropylene film dielectric metal foil d.c. capacitors
EN 60950-1:2006/A2:2013 INFORMATION TECHNOLOGY EQUIPMENT - SAFETY - PART 1: GENERAL REQUIREMENTS (IEC 60950-1:2005/A2:2013, MODIFIED)
EN 135000:1992 Generic Specification: Travelling wave amplifier tubes
EN 60127-5:2017 Miniature fuses - Part 5: Guidelines for quality assessment of miniature fuse-links
EN 61808 : 2000 SECONDARY CELLS AND BATTERIES CONTAINING ALKALINE OR OTHER NON-ACID ELECTROLYTES - SEALED NICKEL-METAL HYDRIDE BUTTON RECHARGEABLE SINGLE CELLS
EN 140401:2009 Blank Detail Specification: Fixed low power film surface mount (SMD) resistors
EN 61248-4:1997 Transformers and inductors for use in electronic and telecommunication equipment - Part 4: Sectional specification for power transformers for switched mode power supplies (SMPS) on the basis of the capability approval procedure
EN 60947-6-2:2003/A1:2007 LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 6-2: MULTIPLE FUNCTION EQUIPMENT - CONTROL AND PROTECTIVE SWITCHING DEVICES (OR EQUIPMENT) (CPS)
EN 61076-7:2000 Connectors for use in d.c., low-frequency analogue and digital high speed data applications - Part 7: Cable outlet accessories with assessed quality, including qualification and capability approval - Sectional specification
EN 61313-1:1997 Fibre optic passive components and cable assemblies - Part 1: Capability approval - Generic specification
EN 62319-1:2005 Polymeric thermistors - Directly heated positive step function temperature coefficient - Part 1: Generic specification
EN 61853-2:2016 Photovoltaic (PV) module performance testing and energy rating - Part 2: Spectral responsivity, incidence angle and module operating temperature measurements
EN 61076-4-110:2002 Connectors for electronic equipment - Part 4-110: Printed board connectors with assessed quality - Detail specification for latched cable connector system having a basic grid of 2,0 mm including full shielding and latching function
EN 114000:1991 Generic Specification: Photomultiplier tubes
EN 130500:1998 Sectional Specification: Fixed metallized polycarbonate film dielectric capacitors for direct current
EN 133100:1998 Sectional Specification: Passive filter units for electromagnetic interference suppression - Filters for which safety tests are not required
EN 132100:1996 Sectional Specification: Fixed multilayer ceramic surface mounting capacitors - Assessment levels EZ and DZ
DEFSTAN 22-48/2(2001) : 2001 SPECIFICATION FOR POSITIVE TEMPERATURE COEFFICIENT THERMISTORS FOR THERMAL PROTECTION OF ELECTRIC MOTORS
EN 181000:1994 Generic Specification: Fibre optic branching devices
EN 180000:1995 Generic specification: Fibre optic attenuators
EN 113000:1991 Generic Specification: Camera tubes
EN 117000:1991 Generic Specification: Solid state all-or-nothing relays of assessed quality - Generic data and methods of test
EN 168000 : 1993 AMD 2 1998 GENERIC SPECIFICATION - QUARTZ CRYSTAL UNITS
BS QC 880000-1(1995) : 1995 AMD 9689 HARMONIZED SYSTEM OF QUALITY ASSESSMENT FOR ELECTRONIC COMPONENTS - FIBRE OPTIC FAN-OUTS - GENERIC SPECIFICATION
I.S. EN 60738-1-3:2008 THERMISTORS - DIRECTLY HEATED POSITIVE STEP-FUNCTION TEMPERATURE COEFFICIENT - PART 1-3: BLANK DETAIL SPECIFICATION - INRUSH CURRENT APPLICATION - ASSESSMENT LEVEL EZ
17/30355776 DC : 0 BS EN 62047-34 ED.1.0 - SEMICONDUCTOR DEVICES - MICRO-ELECTROMECHANICAL DEVICES - PART 34: TEST METHOD FOR MEMS PIEZORESISTIVE PRESSURE-SENSITIVE DEVICE ON WAFER
BS EN 60926:1996 Specification for auxiliaries for lamps. Starting devices (other than glow starters). General and safety requirements
CEI EN 62496-1 : 2010 OPTICAL CIRCUIT BOARDS - PART 1: GENERAL
I.S. EN 160200-1:1998 MICROWAVE MODULAR ELECTRONIC UNITS OF ASSESSED QUALITY - PART 1: CAPABILITY APPROVAL PROCEDURE (SECTIONAL SPECIFICATION)
BIS IS 16049 : 2013 SECONDARY CELLS AND BATTERIES CONTAINING ALKALINE OR OTHER NON-ACID ELECTROLYTES - SEALED NICKEL-CADMIUM PRISMATIC RECHARGEABLE SINGLE CELLS
BS EN 61076-4-111:2002 Connectors for electronic equipment. Printed board connectors with assessed quality Detail specification for two-part power connector modules, for printed boards and backplanes having early mating features, and having a basic grid of 2,5 mm in accordance with IEC 60917-1
99/240909 DC : DRAFT MAR 1999 BS EN 50315-1 - ACCUMULATORS FOR USE IN PHOTOVOLTAIC SYSTEMS - PART 1: SAFETY - TEST REQUIREMENTS AND PROCEDURE
BS CECC 25000:1977 Specification for harmonized system of quality assessment for electronic components: generic specification: inductor and transformer cores for telecommunications
BS EN 60968:2015 Self-ballasted fluorescent lamps for general lighting services. Safety requirements
16/30336095 DC : 0 BS EN 62670-3 ED 1.0 - PHOTOVOLTAIC CONCENTRATORS (CPV) - PERFORMANCE TESTING - PART 3: PERFORMANCE MEASUREMENTS AND POWER RATING
14/30288770 DC : 0 BS EN 61003-2 ED 2.0 - INDUSTRIAL-PROCESS CONTROL SYSTEMS - INSTRUMENTS WITH ANALOGUE INPUTS AND TWO- OR MULTI-STATE OUTPUTS - PART 2: GUIDANCE FOR INSPECTION AND ROUTINE TESTING
BS EN 61076-4-102:1997 Connectors with assessed quality, for use in d.c., low-frequency analogue and in digital high speed data applications. Printed board connectors Detail specification for two-part single-pole connectors, for multiple uses on plug-in units, with pre-centring, coding and early mating features, having a metric grid in accordance with IEC 60917
BS EN 60876-1:2014 Fibre optic interconnecting devices and passive components. Fibre optic spatial switches Generic specification
I.S. EN 61076-4-111:2002 CONNECTORS FOR ELECTRONIC EQUIPMENT - PRINTED BOARD CONNECTORS WITH ASSESSED QUALIFY - DETAIL SPECIFICATION FOR TWO-PART POWER CONNECTOR MODULES, FOR PRINTED BOARDS AND BACKPLANES HAVING EARLY MATING FEATURES, AND HAVING A BASIC GRID OF 2,5 MM IN ACCORDANCE WITH IEC 60917-1
CEI EN 60384-4-2 : 2009 FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 4-2: BLANK DETAIL SPECIFICATION - FIXED ALUMINIUM ELECTROLYTIC CAPACITORS WITH SOLID (MNO[2]) ELECTROLYTE - ASSESSMENT LEVEL EZ
06/30157868 DC : 0 BS EN 60393-1 - POTENTIOMETERS FOR USE IN ELECTRONIC EQUIPMENT - PART 1: GENERIC SPECIFICATION
BS EN 132400:1995 Harmonized system of quality assessment for electronic components. Sectional specification. Fixed capacitors for electromagnetic interference suppression and connection to the supply mains (Assessment Level D)
06/30151323 DC : DRAFT JUN 2006 BS IEC 61988-5 - PLASMA DISPLAY PANELS - PART 5: GENERIC SPECIFICATION
CEI EN 61076-4-100 : 2003 CONNECTORS FOR ELECTRONIC EQUIPMENT - PART 4-100: PRINTED BOARD CONNECTORS WITH ASSESSED QUALITY - DETAIL SPECIFICATION FOR TWO-PART CONNECTOR MODULES HAVING A GRID OF 2,5 MM FOR PRINTED BOARDS AND BACKPLANES
NF EN 50547 : 2013 RAILWAY APPLICATIONS - BATTERIES FOR AUXILIARY POWER SUPPLY SYSTEMS
09/30173981 DC : 0 BS EN 60662 - HIGH-PRESSURE SODIUM VAPOUR LAMPS - PERFORMANCE SPECIFICATIONS
15/30318551 DC : 0 BS EN 62276 ED. 3.0 - SINGLE CRYSTAL WAFERS FOR SURFACE ACOUSTIC WAVE (SAW) DEVICE APPLICATION - SPECIFICATIONS AND MEASURING METHODS
CSA C22.2 No. 60065 : 2016 AUDIO, VIDEO AND SIMILAR ELECTRONIC APPARATUS - SAFETY REQUIREMENTS
BS EN 61269-1:1997 Fibre optic terminus sets Generic specification
03/101947 DC : DRAFT FEB 2003 IEC 60939-1 ED.2.0 - PASSIVE FILTER UNITS FOR ELECTROMAGNETIC INTERFERENCE SUPPRESSION - PART 1: GENERIC SPECIFICATION
BS EN 61076-3-101 : 1998 CONNECTORS WITH ASSESSED QUALITY, FOR USE IN D.C., LOW-FREQUENCY ANALOGUE AND IN DIGITAL HIGH-SPEED DATA APPLICATIONS - PART 3: RECTANGULAR CONNECTORS - SECTION 101: DETAIL SPECIFICATION FOR A RANGE OF SHIELDED CONNECTORS WITH TRAPEZOIDAL SHAPED SHELLS AND NON-REMOVABLE RECTANGULAR CONTACTS ON A 1,27 MM X 2,54 MM CENTRE-LINE
BS EN 60384-21-1:2004 Fixed capacitors for use in electronic equipment Blank detail specification: Fixed surface mount multilayer capacitors of ceramic dielectric, Class 1. Assessment level EZ
BS EN 129000:1996 Harmonized system of quality assessment for electronic components. Generic specification. Fixed RF wound inductors
BS EN 60115-8:2012 Fixed resistors for use in electronic equipment Sectional specification. Fixed surface mount resistors
06/30156696 DC : DRAFT OCT 2006
NF EN 60738-1-2 : 2014 THERMISTORS - DIRECTLY HEATED POSITIVE STEP-FUNCTION TEMPERATURE COEFFICIENT - PART 1-2: BLANK DETAIL SPECIFICATION - HEATING ELEMENT APPLICATION - ASSESSMENT LEVEL EZ
CEI EN 61076-4-110 : 2003 CONNECTORS FOR ELECTRONIC EQUIPMENT - PART 4-110: PRINTED BOARD CONNECTORS WITH ASSESSED QUALITY - DETAIL SPECIFICATION FOR LATCHED CABLE CONNECTOR SYSTEM HAVING A BASIC GRID OF 2,0 MM INCLUDING FULL SHIELDING AND LATCHING FUNCTION
BS EN 61248-6:1997 Transformers and inductors for use in electronic and telecommunication equipment Sectional specification for inductors on the basis of the capability approval procedure
07/30152672 DC : 0 BS EN 60966-2-5 - RADIO FREQUENCY AND COAXIAL CABLE ASSEMBLIES - PART 2-5: DETAIL SPECIFICATION FOR CABLE ASSEMBLIES FOR RADIO AND TV RECEIVERS - FREQUENCY RANGE 0 TO 1000 MHZ, IEC 61169-2 CONNECTORS
BS QC 760201:1992 Specification for harmonized system of quality assessment for electronic components. Semiconductor devices. Integrated circuits. Blank detail specification. Film and hybrid integrated circuits: capability approval
BS CECC16200(1992) : 1992 AMD 9627 HARMONIZED SYSTEM OF QUALITY ASSESSMENT FOR ELECTRONIC COMPONENTS - SECTIONAL SPECIFICATION - ELECTROMECHANICAL ALL OR NOTHING RELAYS
DIN EN 60546-2:2011-04 CONTROLLERS WITH ANALOGUE SIGNALS FOR USE IN INDUSTRIAL-PROCESS CONTROL SYSTEMS - PART 2: GUIDANCE FOR INSPECTION AND ROUTINE TESTING
BS EN 61810-5:1999 Electromechanical non-specified time all-or-nothing relays Insulation coordination
I.S. EN 62435-1:2017 ELECTRONIC COMPONENTS - LONG-TERM STORAGE OF ELECTRONIC SEMICONDUCTOR DEVICES - PART 1: GENERAL
CEI EN 61076-7 : 2001 CONNECTORS FOR USE IN D/C/, LOW-FREQUENCY ANALOGUE AND DIGITAL HIGH SPEED DATA APPLICATIONS PART 7: CABLE OUTLET ACCESSORIES WITH ASSESSED QUALITY, INCLUDING QUALIFICATION AND CAPABILITY APPROVAL - SECTIONAL SPECIFICATION
I.S. EN 60929:2011 AC AND/OR DC-SUPPLIED ELECTRONIC CONTROL GEAR FOR TUBULAR FLUORESCENT LAMPS - PERFORMANCE REQUIREMENTS
04/30126747 DC : DRAFT DEC 2004 IEC 60874-1 ED.5 - CONNECTORS FOR OPTICAL FIBRES AND CABLES - PART 1: GENERIC SPECIFICATION
I.S. EN 60966-2-1:2009 RADIO FREQUENCY AND COAXIAL CABLE ASSEMBLIES - PART 2-1: SECTIONAL SPECIFICATION FOR FLEXIBLE COAXIAL CABLE ASSEMBLIES
05/30133269 DC : DRAFT MAY 2005 IEC 61193-2 - QUALITY ASSESSMENT SYSTEMS - PART 2: SELECTION AND USE OF SAMPLING PLANS FOR INSPECTION OF ELECTRONIC COMPONENTS AND PACKAGES
07/30168153 DC : 0 BS EN 60875-1 - NON-WAVELENGTH-SELECTIVE FIBRE OPTIC BRANCHING DEVICES - PART 1: GENERIC SPECIFICATION
CEI EN 60384-26-1 : 2011 FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 26-1: BLANK DETAIL SPECIFICATION - FIXED ALUMINUM ELECTROLYTIC CAPACITORS WITH CONDUCTIVE POLYMER SOLID ELECTROLYTE - ASSESSMENT LEVEL EZ
03/104578 DC : DRAFT MAR 2003 IEC 60384-8 ED. 3.0 - FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 8: SECTIONAL SPECIFICATION - FIXED CAPACITORS OF CERAMIC DIELECTRIC, CLASS 1
BS EN 60384-16:2005 Fixed capacitors for use in electronic equipment Sectional specification: Fixed metallized polypropylene film dielectric d.c. capacitors
04/30111632 DC : DRAFT MARCH 2004
BS EN 61811-50:2002 Electromechanical all-or-nothing relays Sectional specification. Electromechanical all-or-nothing telecom relays of assessed quality
BS EN 61229:1996 Rigid protective covers for live working on a.c. installations
07/30161526 DC : 0 BS EN 60115-8 - FIXED RESISTORS FOR USE IN ELECTRONIC EQUIPMENT - PART 8: SECTIONAL SPECIFICATION - FIXED SURFACE MOUNT RESISTORS
BS CECC14000(1984) : 1984 AMD 7575 HARMONIZED SYSTEM OF QUALITY ASSESSMENT FOR ELECTRONIC COMPONENTS: GENERIC SPECIFICATION: PHOTOMULTIPLIER TUBES
BS EN 61076-4-103:1999 Connectors with assessed quality, for use in d.c., low-frequency analogue and in digital high speed data applications. Printed board connectors Detail specification for two-part connectors with shielding and a basic grid of 2,5 mm - Cable to board connectors, shielded against EMC ,grid 2,5 mm,for high speed data rates,for use with printed boards
I.S. EN 62384:2006 DC OR AC SUPPLIED ELECTRONIC CONTROL GEAR FOR LED MODULES - PERFORMANCE REQUIREMENTS
13/30278343 DC : 0 BS EN 62246-1 - REED SWITCHES - PART 1: GENERIC SPECIFICATION
BS IEC 61747-1 : 1998 AMD 10788 LIQUID CRYSTAL AND SOLID-STATE DISPLAY DEVICES - GENERIC SPECIFICATION
BS EN 61747-1:2000 Liquid crystal and solid-state display devices Generic specification
BS EN 62384 : 2006 DC OR AC SUPPLIED ELECTRONIC CONTROL GEAR FOR LED MODULES - PERFORMANCE REQUIREMENTS
CSA E60384.1 : 2014 FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 1: GENERIC SPECIFICATION
BS EN 60923:2005 Auxiliaries for lamps. Ballasts for discharge lamps (excluding tubular fluorescent lamps). Performance requirements
IEC 60966-4:2003 Radio frequency and coaxial cable assemblies - Part 4: Sectional specification for semi-rigid coaxial cable assemblies
BS EN 60738-1-3:2008 Thermistors. Directly heated positive step-function temperature coefficient Blank detail specification. Inrush current application. Assessment level EZ
BS EN 61076-4-104:1999 Connectors for electronic equipment. Printed board connectors with assessed quality Detail specification for two-part modular connectors, basic grid of 2,0 mm, with terminations on a multiple grid of 0,5 mm - Detail specification for two part modular connectors (with optional shielding plates) for printed boards and backplanes, basic grid 2,0 mm, with terminations on a multiple grid of 0,5 mm
BS CECC 40202:1981 Specification for harmonized system of quality assessment for electronic components. Blank detail specification: fixed power resistors. Assessment level M
BS EN 130900:1998 Harmonized system of quality assessment for electronic components. Sectional specification: fixed polystyrene film dielectric metal foil d.c. capacitors
14/30282293 DC : 0 BS EN 60679-1 - PIEZOELECTRIC AND ASSOCIATED MATERIAL OSCILLATORS OF ASSESSED QUALITY - PART 1: GENERIC SPECIFICATION
10/30218221 DC : 0 BS EN 61314-1 - FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - FIBRE OPTIC FAN-OUTS - PART 1: GENERIC SPECIFICATION
BS EN 160100:1998 Harmonized system of quality assessment for electronic components. Sectional specification: capability approval of manufacturers of printed board assemblies of assessed quality
BS 6737:1986 Specification for dimensional, electrical and luminous requirements for lamps for road vehicles
13/30288636 DC : 0 BS EN 60876-1 - FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - FIBRE OPTIC SPATIAL SWITCHES - PART 1: GENERIC SPECIFICATION
02/206104 DC : DRAFT MAY 2002 IEC 60384-22, ED.1 - FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 22: SECTIONAL SPECIFICATION - FIXED SURFACE MOUNT MULTILAYER CAPACITORS OF CERAMIC DIELECTRIC - CLASS 2 - ASSESSMENT LEVEL EZ
14/30304198 DC : 0 BS EN 62077 - FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - FIBRE OPTIC CIRCULATORS - GENERIC SPECIFICATION
08/30176177 DC : DRAFT JAN 2008 BS EN 60966-2-3 - RADIO FREQUENCY AND COAXIAL CABLE ASSEMBLIES - PART 2-3: DETAIL SPECIFICATION FOR FLEXIBLE COAXIAL CABLE ASSEMBLIES - FREQUENCY RANGE 0 TO 1000 MHZ, IEC 61169-8 CONNECTORS
IEC 61051-1:2007 Varistors for use in electronic equipment - Part 1: Generic specification
00/246138 DC : DRAFT DEC 2000 BS EN 61436 ED 2 - SEALED NICKEL-METAL HYDRIDE RECHARGEABLE SINGLE CELLS
BS EN 61811-10:2003 Electromechanical all-or-nothing relays Sectional specification. Relays for industrial application
I.S. EN 61235:1997 LIVE WORKING - INSULATING HOLLOW TUBES FOR ELECTRICAL PURPOSES
BS EN 137000:1996 Harmonized system of quality assessment for electronic components. Generic specification: Fixed aluminium electrolytic a.c. capacitors with non-solid electrolyte for use with motors
09/30204713 DC : 0 BS EN 61853-1 - PHOTOVOLTAIC (PV) MODULE PERFORMANCE TESTING AND ENERGY RATING - PART 1: IRRADIANCE AND TEMPERATURE PERFORMANCE MEASUREMENTS AND POWER RATING
CEI EN 60546-2 : 2013 CONTROLLERS WITH ANALOGUE SIGNALS FOR USE IN INDUSTRIAL-PROCESS CONTROL SYSTEMS - PART 2: GUIDANCE FOR INSPECTION AND ROUTINE TESTING
18/30368743 DC (published 2018-04) BS EN 60947-6-2. Low-voltage switchgear and controlgear Part 6-2. Multiple function equipment. Control and protective switching devices (or equipment) (CPS)
BS EN 60546-2:2010 Controllers with analogue signals for use in industrial-process control systems Guidance for inspection and routine testing
BS QC 390101:1992 Fixed film resistor networks for use in electronic equipment. Blank detail specification for film resistor networks of assessed quality on the basis of the capability approval procedure. Assessment level E
BS 7741(1994) : AMD 8959 SPECIFICATION FOR INSULATING HOLLOW TUBES FOR ELECTRICAL PURPOSES
CSA IEC 61646 : 2010 : R2014 THIN-FILM TERRESTRIAL PHOTOVOLTAIC (PV) MODULES - DESIGN QUALIFICATION AND TYPE APPROVAL
BS EN 61853-2:2016 Photovoltaic (PV) module performance testing and energy rating Spectral responsivity, incidence angle and module operating temperature measurements
I.S. EN 61298-1:2008 PROCESS MEASUREMENT AND CONTROL DEVICES - GENERAL METHODS AND PROCEDURES FOR EVALUATING PERFORMANCE - PART 1: GENERAL CONSIDERATIONS
09/30207307 DC : 0 BS EN 60115-2 - FIXED RESISTORS FOR USE IN ELECTRONIC EQUIPMENT - PART 2: SECTIONAL SPECIFICATION: FIXED LOW-POWER NON-WIREWOUND RESISTORS
EN 60947-5-1:2017 Low-voltage switchgear and controlgear - Part 5-1: Control circuit devices and switching elements - Electromechanical control circuit devices
CEI EN 61314-1 : 2012 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - FIBRE OPTIC FAN-OUTS - PART 1: GENERIC SPECIFICATION
EN 60384-2:2012 Fixed capacitors for use in electronic equipment - Part 2: Sectional specification - Fixed metallized polyethylene terephthalate film dielectric d.c. capacitors
09/30206024 DC : 0 BS EN 61199 - SINGLE-CAPPED FLUORESCENT LAMPS - SAFETY SPECIFICATIONS
BS EN 181000:1995 Harmonized system of quality assessment for electronic components. Generic specification. Fibre optic branching devices
I.S. EN 135000:1994 TRAVELLING WAVE AMPLIFIER TUBES (GENERIC SPECIFICATION)
BS QC 760101:1992 Specification for harmonized system of quality assessment for electronic components. Semiconductor devices. Integrated circuits. Blank detail specification. Film and hybrid integrated circuits: qualification approval procedure
BS EN 50321:2000 Electrically insulating footwear for working on low voltage installations
BS EN 62099:2001 Fibre optic wavelength switches. Generic specification
CEI EN 61358 : 1997 ACCEPTANCE INSPECTION FOR DIRECT CONNECTED ALTERNATING CURRENTE STATIC WATT-HOUR METERS FOR ACTIVE ENERGY (CLASSES 1 AND 2)
I.S. EN 61853-2:2016 PHOTOVOLTAIC (PV) MODULE PERFORMANCE TESTING AND ENERGY RATING - PART 2: SPECTRAL RESPONSIVITY, INCIDENCE ANGLE AND MODULE OPERATING TEMPERATURE MEASUREMENTS
CEI EN 60393-1 : 2010 POTENTIOMETERS FOR USE IN ELECTRONIC EQUIPMENT - PART 1: GENERIC SPECIFICATION
I.S. CLC TS 50466:2006 LONG DURATION STORAGE OF ELECTRONIC COMPONENTS - SPECIFICATION FOR IMPLEMENTATION
BS CECC 19000:1979 Harmonized system of quality assessment for electronic components: generic specification: dry reed make contact units
BS EN 175500:1997 Harmonized system of quality assessment for electronic components. Sectional specification:cable outlet accessories for connectors, including qualification approval and capability approval
CSA C61215 : 2008 : R2013 CRYSTALLINE SILICON TERRESTRIAL PHOTOVOLTAIC (PV) MODULES - DESIGN QUALIFICATION AND TYPE APPROVAL
I.S. EN 61951-2:2017 SECONDARY CELLS AND BATTERIES CONTAINING ALKALINE OR OTHER NON ACID ELECTROLYTES - SECONDARY SEALED CELLS AND BATTERIES FOR PORTABLE APPLICATIONS - PART 2: NICKEL-METAL HYDRIDE
I.S. EN 60384-1:2016 FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 1: GENERIC SPECIFICATION
I.S. EN 168000:1994 QUARTZ CRYSTAL UNITS (GENERIC SPECIFICATION)
IEC 60384-1 REDLINE : 5ED 2016 FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 1: GENERIC SPECIFICATION
CEI EN 175500 : 1998 SECTIONAL SPECIFICATION - CABLE OUTLET ACCESSORIES FOR CONNECTORS, INCLUDING QUALIFICATION APPROVAL AND CAPABILITY APPROVAL
CEI EN 60966-3-1 : 2010 RADIO FREQUENCY AND COAXIAL CABLE ASSEMBLIES - PART 3-1: BLANK DETAIL SPECIFICATION FOR SEMI-FLEXIBLE COAXIAL CABLE ASSEMBLIES
NF EN 61988-5 : 2010 PLASMA DISPLAY PANELS - PART 5: GENERIC SPECIFICATION
NF EN 60770-2 : 2011 TRANSMITTERS FOR USE IN INDUSTRIAL-PROCESS CONTROL SYSTEMS - PART 2: METHODS FOR INSPECTION AND ROUTINE TESTING
CEI EN 61049 : 1998 CAPACITORS FOR USE IN TUBULAR FLUORESCENT AND OTHER DISCHARGE LAMP CIRCUITS - PERFORMANCE REQUIREMENTS
I.S. EN 62134-1:2009 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - FIBRE OPTIC CLOSURES - PART 1: GENERIC SPECIFICATION
I.S. EN 62811:2015 AC AND/OR DC-SUPPLIED ELECTRONIC CONTROLGEAR FOR DISCHARGE LAMPS (EXCLUDING FLUORESCENT LAMPS) - PERFORMANCE REQUIREMENTS FOR LOW FREQUENCY SQUAREWAVE OPERATION
BS EN 138000:1997 Harmonized system of quality assessment for electronic components. Generic specification: fixed inductors for electromagnetic interference suppression (inductors for which safety tests are required)
CEI EN 60384-26 : 2011 FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 26: SECTIONAL SPECIFICATION - FIXED ALUMINIUM ELECTROLYTIC CAPACITORS WITH CONDUCTIVE POLYMER SOLID ELECTROLYTE
I.S. EN 60810:2015 LAMPS FOR ROAD VEHICLES - PERFORMANCE REQUIREMENTS
I.S. EN 61269-1:1999 FIBRE OPTIC TERMINUS SETS - PART 1: GENERIC SPECIFICATION
I.S. EN 60923:2005 AUXILIARIES FOR LAMPS - BALLASTS FOR DISCHARGE LAMPS (EXCLUDING TUBULAR FLUORESCENT LAMPS) - PERFORMANCE REQUIREMENTS
BS EN 61347-2-1 : 2001 LAMP CONTROLGEAR - PART 2-1: PARTICULAR REQUIREMENTS FOR STARTING DEVICES (OTHER THAN GLOW STARTERS)
I.S. EN 60603-2:1998 CONNECTORS FOR FREQUENCIES BELOW 3 MHZ FOR USE WITH PRINTED BOARDS - PART 2: DETAIL SPECIFICATION FOR TWO-PART CONNECTORS WITH ASSESSED QUALITY, FOR PRINTED BOARDS, FOR BASIC GRID OF 2,54 MM (0,1 IN) WITH COMMON MOUNTING FEATURES
I.S. EN 140401-802:2007 DETAIL SPECIFICATION: FIXED LOW POWER FILM SMD RESISTORS - RECTANGULAR - STABILITY CLASSES 1; 2
BS EN 60357 : 2003 TUNGSTEN HALOGEN LAMPS (NON-VEHICLE) - PERFORMANCE SPECIFICATIONS (IEC 60357:2002, MODIFIED)
I.S. EN 61193-2:2007 QUALITY ASSESSMENT SYSTEMS - PART 2: SELECTION AND USE OF SAMPLING PLANS FOR INSPECTION OF ELECTRONIC COMPONENTS AND PACKAGES
I.S. EN 60115-8:2012 FIXED RESISTORS FOR USE IN ELECTRONIC EQUIPMENT - PART 8: SECTIONAL SPECIFICATION - FIXED SURFACE MOUNT RESISTORS (IEC 60115-8:2009 (MOD))
I.S. EN 60921:2005 BALLASTS FOR TUBULAR FLUORESCENT LAMPS - PERFORMANCE REQUIREMENTS
I.S. EN 62675:2014 SECONDARY CELLS AND BATTERIES CONTAINING ALKALINE OR OTHER NON-ACID ELECTROLYTES - SEALED NICKEL-METAL HYDRIDE PRISMATIC RECHARGEABLE SINGLE CELLS
BS EN 60539-2 : 2004 DIRECTLY HEATED NEGATIVE TEMPERATURE COEFFICIENT THERMISTORS - PART 2: SECTIONAL SPECIFICATION - SURFACE MOUNT NEGATIVE TEMPERATURE COEFFICIENT THERMISTORS
I.S. EN 140401:2009 BLANK DETAIL SPECIFICATION: FIXED LOW POWER FILM SURFACE MOUNT (SMD) RESISTORS
BS EN 61195 : 2000 DOUBLE-CAPPED FLUORESCENT LAMPS - SAFETY SPECIFICATIONS
BS EN 60432-1 : 2000 INCANDESCENT LAMPS - SAFETY SPECIFICATIONS - PART 1: TUNGSTEN FILAMENT LAMPS FOR DOMESTIC AND SIMILAR GENERAL LIGHTING PURPOSES
I.S. EN 61248-3:1998 TRANSFORMERS AND INDUCTORS FOR USE IN ELECTRONIC AND TELECOMMUNICATION EQUIPMENT - PART 3: SECTIONAL SPECIFICATION FOR POWER TRANSFORMERS ON THE BASIS OF THE CAPABILITY APPROVAL PROCEDURE
I.S. EN 60384-2:2012 FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 2: SECTIONAL SPECIFICATION - FIXED METALLIZED POLYETHYLENE TEREPHTHALATE FILM DIELECTRIC D.C. CAPACITORS (IEC 60384-2:2011 (EQV))
I.S. EN 61248-4:1998 TRANSFORMERS AND INDUCTORS FOR USE IN ELECTRONIC AND TELECOMMUNICATION EQUIPMENT - PART 4: SECTIONAL SPECIFICATION FOR POWER TRANSFORMERS FOR SWITCHED MODE POWER SUPPLIES (SMPS) ON THE BASIS OF THE CAPABILITY APPROVAL PROCEDURE
I.S. EN 61076-4-104:1999 CONNECTORS FOR USE IN D.C. LOW-FREQUENCY ANALOGUE AND DIGITAL HIGH-SPEED DATA APPLICATIONS - PART 4-104: PRINTED BOARD CONNECTORS WITH ASSESSED QUALITY - DETAIL SPECIFICATION FOR TWO-PART MODULAR CONNECTORS, BASIC GRID OF 2.0 MM WITH TERMINATIONS ON A MULTIPLE GRID OF 0.5 MM
CEI EN 60947-4-2 : 2013 LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 4-2: CONTACTORS AND MOTOR-STARTERS - AC SEMICONDUCTOR MOTOR CONTROLLERS AND STARTERS
CEI EN 61988-5 : 2011 PLASMA DISPLAY PANELS - PART 5: GENERIC SPECIFICATION
CEI EN 61747-1 : 2004 LIQUID CRYSTAL AND SOLID-STATE DISPLAY DEVICES - PART 1: GENERIC SPECIFICATION
IEC 61045-2:1991 Fixed film resistor networks for use in electronic equipment - Part 2: Sectional specification for film resistor networks of assessed quality on the basis of the capability approval procedure
I.S. EN 61811-50:2002 ELECTROMECHANICAL ALL-OR-NOTHING RELAYS - PART 50: SECTIONAL SPECIFICATION - ELECTROMECHANICAL ALL-OR-NOTHING TELECOM RELAYS OF ASSESSED QUALITY
I.S. 529:1991 FIXED CERAMIC CAPACITORS OF CERAMIC DIELECTRIC, CLASS 1 (SECTIONAL SPECIFICATION)
I.S. 530:1991 FIXED CAPACITORS OF CERAMIC DIELECTRIC, CLASS 2 (SECTIONAL SPECIFICATION)
I.S. EN 153000:1998 DISCRETE PRESSURE CONTACT POWER SEMICONDUCTOR DEVICES (QUALIFICATION APPROVAL) (GENERIC SPECIFICATION)
I.S. EN 60873-2:2004 ELECTRICAL AND PNEUMATIC ANALOGUE CHART RECORDERS FOR USE IN INDUSTRIAL PROCESS CONTROL SYSTEMS; PART 2: GUIDANCE FOR INSPECTION AND ROUTINE TESTING
CEI 56-33 : 2000 RELIABILITY TESTING - COMPLIANCE TEST PLANS FOR SUCCESS RATIO
I.S. EN 60432-2:2004 INCANDESCENT LAMPS - SAFETY SPECIFICATIONS - PART 2: TUNGSTEN HALOGEN LAMPS FOR DOMESTIC AND SIMILAR GENERAL LIGHTING PURPOSES (IEC 60432-2:1999 (MOD))
IEC 60539-1:2016 Directly heated negative temperature coefficient thermistors - Part 1: Generic specification
I.S. 1128:1991 ELECTROMECHANICAL ALL-OR NOTHING RELAYS POLARIZED MONOSTABLE HERMETICALLY SEALED GENERAL PURPOSE RELAYS (DETAIL SPECIFICATION)
I.S. EN 60393-6:2016 POTENTIOMETERS FOR USE IN ELECTRONIC EQUIPMENT - PART 6: SECTIONAL SPECIFICATION - SURFACE MOUNT PRESET POTENTIOMETERS
CEI EN 60432-3 : 2013 INCANDESCENT LAMPS - SAFETY SPECIFICATIONS - PART 3: TUNGSTEN-HALOGEN LAMPS (NON-VEHICLE)
BS EN 60432-3:2013 Incandescent lamps. Safety specifications Tungsten-halogen lamps (non-vehicle)
BS CECC 40104:1992 Specification for harmonized system of quality assessment for electronic components. Blank detail specification. Fixed low power non-wirewound resistors of enhanced quality
I.S. EN 175300:1998 RECTANGULAR CONNECTORS FOR FREQUENCIES BELOW 3 MHZ (SECTIONAL SPECIFICATION)
BS EN 60875-1:2015 Fibre optic interconnecting devices and passive components. Non-wavelength-selective fibre optic branching devices Generic specification
CEI EN 60603-1 : 2001 CONNECTORS FOR FREQUENCIES BELOW 3 MHZ FOR USE WITH PRINTED BOARDS - PART 1: GENERIC SPECIFICATION; GENERAL REQUIREMENTS AND GUIDE FOR THE PREPARATION OF DETAIL SPECIFICATIONS, WITH ASSESSED QUALITY
I.S. EN 60368-1:2000 PIEZOELECTRIC FILTERS OF ASSESSED QUALITY - PART 1: GENERIC SPECIFICATION
I.S. EN 140100:2008 SECTIONAL SPECIFICATION: FIXED LOW POWER FILM RESISTORS
IEC 61153:1992 Electrical and pneumatic analogue chart recorders for use in industrial-process control systems - Guidance for inspection and routine testing
IEC 60662:2011 High-pressure sodium vapour lamps - Performance specifications
I.S. EN 60947-8:2003 LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 8: CONTROL UNITS FOR BUILT-IN THERMAL PROTECTION (PTC) FOR ROTATING ELECTRICAL MACHINES (IEC 60947-8:2003 (EQV))
IEC 61049:1991 Capacitors for use in tubular fluorescent and other discharge lamp circuits. Performance requirements
IEC TS 61994-4-4:2010 Piezoelectric and dielectric devices for frequency control and selection - Glossary - Part 4-4: Materials - Materials for surface acoustic wave (SAW) devices
DIN EN ISO 17526:2003-10 OPTIC AND OPTICAL INSTRUMENTS - LASERS AND LASER-RELATED EQUIPMENT - LIFETIME OF LASERS
IEC 60384-13-1:2006 Fixed capacitors for use in electronic equipment - Part 13-1: Blank detail specification - Fixed polypropylene film dielectric metal foil d.c. capacitors - Assessment level E and EZ
UNE-EN 60086-3:2011 Primary batteries - Part 3: Watch batteries
IEC 61204-6:2000 Low-voltage power supplies, d.c. output - Part 6: Requirements for low-voltage power supplies of assessed performance
IEC 61076-4-105:1995 Connectors with assessed quality, for use in d.c., low frequency analogue and in digital high-speed data applications - Part 4: Printed board connectors - Section 105 : Detail specification for 9 mm circular connector with 3 to 8 contacts for use in a wide range of applications including the telecommunication .
ISO 17526:2003 Optics and optical instruments Lasers and laser-related equipment Lifetime of lasers
IEC 61853-1:2011 Photovoltaic (PV) module performance testing and energy rating - Part 1: Irradiance and temperature performance measurements and power rating
IEC 60738-1-3:2008 Thermistors - Directly heated positive step-function temperature coefficient - Part 1-3: Blank detail specification - Inrush current application - Assessment level EZ
IEC 60947-4-3:2014 Low-voltage switchgear and controlgear - Part 4-3: Contactors and motor-starters - AC semiconductor controllers and contactors for non-motor loads
EN 60065:2014/AC:2017-01 AUDIO, VIDEO AND SIMILAR ELECTRONIC APPARATUS - SAFETY REQUIREMENTS (IEC 60065:2014/COR2:2016)
EN 60947-3:2009/A2:2015 LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 3: SWITCHES, DISCONNECTORS, SWITCH-DISCONNECTORS AND FUSE-COMBINATION UNITS (IEC 60947-3:2008/A2:2015)
EN 60384-13:2012 Fixed capacitors for use in electronic equipment - Part 13: Sectional specification - Fixed polypropylene film dielectric metal foil d.c. capacitors
IEC 60947-2:2016 RLV Low-voltage switchgear and controlgear - Part 2: Circuit-breakers
IEC 60623:2017 RLV Secondary cells and batteries containing alkaline or other non-acid electrolytes - Vented nickel-cadmium prismatic rechargeable single cells
IEC 61951-2:2017 RLV Secondary cells and batteries containing alkaline or other non acid electrolytes - Secondary sealed cells and batteries for portable applications - Part 2: Nickel-metal hydride
UNE-EN 60086-1:2011 Primary batteries - Part 1: General
IEC 60947-5-1:2016 Low-voltage switchgear and controlgear - Part 5-1: Control circuit devices and switching elements - Electromechanical control circuit devices
VDE 0560-810 : 1998 SECTIONAL SPECIFICATION - FIXED ALUMINIUM ELECTROLYTIC A.C. CAPACITORS WITH NON-SOLID ELECTROLYTE FOR MOTOR STARTER APPLICATIONS - QUALIFICATION APPROVAL
VDE 0419-1 : 94 AMD 2 99 TIME SWITCHES FOR TARIFF AND LOAD CONTROL
VDE 0560-800 : 1998 GENERIC SPECIFICATION - FIXED ALUMINIUM ELECTROLYTIC A.C. CAPACITORS WITH NON-SOLID ELECTROLYTE FOR USE WITH MOTORS
BS CECC 30901:1988 Specification for harmonized system of quality assessment for electronic components. Blank detail specification: fixed polystyrene film dielectric metal foil d.c. capacitors
BIS IS 13252-1 : 2010 AMD 1 2013 INFORMATION TECHNOLOGY EQUIPMENT - SAFETY - PART 1: GENERAL REQUIREMENTS
DIN EN 137100 : 1998 SECTIONAL SPECIFICATION - FIXED ALUMINIUM ELECTROLYTIC A.C. CAPACITORS WITH NON-SOLID ELECTROLYTE FOR MOTOR STARTER APPLICATIONS - QUALIFICATION APPROVAL
BS CECC 63000:1990 Harmonized system of quality assessment for electronic components. Generic specification: film and hybrid integrated circuits
DIN EN 137000 : 1998-03 GENERIC SPECIFICATION - FIXED ALUMINIUM ELECTROLYTIC A.C. CAPACITORS WITH NON-SOLID ELECTROLYTE FOR USE WITH MOTORS
DIN EN 60938-1 : 2008 FIXED INDUCTORS FOR ELECTROMAGNETIC INTERFERENCE SUPPRESSION - PART 1: GENERIC SPECIFICATION
BS CECC 30400:1984 Harmonized system of quality assessment for electronic components. Sectional specification: fixed metallized polyethylene-terephthalate film dielectric capacitors for direct current
DIN EN 61049 : 1994 CAPACITORS FOR USE IN TUBULAR FLUORESCENT AND OTHER DISCHARGE LAMP CIRCUITS - PERFORMANCE REQUIREMENTS
VDE 0420-1 : 94 AMD 2 99 ELECTRONIC RIPPLE CONTROL RECEIVERS FOR TARIFF AND LOAD CONTROL
DIN EN 60255-23 : 1997 ELECTRICAL RELAYS - PART 23: CONTACT PERFORMANCE
BS CECC 30101:1988 Specification for harmonized system of quality assessment for electronic components. Blank detail specification: fixed polyethylene-terephthalate film dielectric metal foil capacitors for direct current
VDE 0418-60 : 1996 ACCEPTANCE INSPECTION FOR DIRECT CONNECTED ALTERNATING CURRENT STATIC WATT-HOUR METERS FOR ACTIVE ENERGY (CLASSES 1 AND 2)
BS 397-1:1989 Primary batteries Specification for general requirements
BS CECC 50000:1987 Harmonized system of quality assessment for electronic components. Generic specification: discrete semiconductor devices
VDE 0557-6 : 2001 LOW-VOLTAGE POWER SUPPLIES, DC OUTPUT - PART 6: REQUIREMENTS FOR LOW-VOLTAGE POWER SUPPLIES OF ASSESSED PERFORMANCE
BS CECC 30100:1986 Harmonized system of quality assessment for electronic components. Sectional specification: fixed polyethylene terephthalate film dielectric metal foil capacitors for direct current
BS CECC 22000:1993 Harmonized system of quality assessment for electronic components. Generic specification. Radio frequency coaxial connectors (Parts I, II and III)
VDE 0560-62 : 1994 CAPACITORS FOR USE IN TUBULAR FLUORESCENT AND OTHER DISCHARGE LAMP CIRCUITS - PERFORMANCE REQUIREMENTS
BS CECC 30900:1986 Harmonized system of quality assessment for electronic components. Sectional specification: fixed polystyrene film dielectric metal foil d.c. capacitors
BS CECC17000(1992) : 1992 AMD 9626 HARMONIZED SYSTEM OF QUALITY ASSESSMENT FOR ELECTRONIC COMPONENTS - GENERIC SPECIFICATION - SOLID STATE ALL OR NOTHING RELAYS - GENERIC DATA AND METHODS OF TEST
BIS IS 13252 : 2003 INFORMATION TECHNOLOGY EQUIPMENT - SAFETY - GENERAL REQUIREMENTS
BS CECC 16000:1980 Harmonized system of quality assessment for electronic components. Generic specification: electromechanical all-or-nothing relays
VDE 0435-140 : 1999 ELECTROMECHANICAL NON-SPECIFIED TIME ALL-OR-NOTHING ELECTRICAL RELAYS - INSULATION COORDINATION
BS EN 60188:2001 High-pressure mercury vapour lamps. Performance specifications
DIN EN 61358 : 1996 ACCEPTANCE INSPECTION FOR DIRECT CONNECTED ALTERNATING CURRENT STATIC WATT-HOUR METERS FOR ACTIVE ENERGY (CLASSES 1 AND 2)
CEI EN 60966-4 : 2005 RADIO FREQUENCY AND COAXIAL CABLE ASSEMBLIES - PART 4: SECTIONAL SPECIFICATION FOR SEMI-RIGID COAXIAL CABLE ASSEMBLIES
CEI CLC/TS 50466 : 2006 LONG DURATION STORAGE OF ELECTRONIC COMPONENTS - SPECIFICATION FOR IMPLEMENTATION
07/30149142 DC : 0 BS IEC 60115-1 - FIXED RESISTORS FOR USE IN ELECTRONIC EQUIPMENT - PART 1: GENERIC SPECIFICATION
BS 7401(1990) : 1990 AMD 7673 SPECIFICATION FOR ELECTRONIC RIPPLE CONTROL RECEIVERS FOR TARIFF AND LOAD CONTROL
I.S. EN 62435-2:2017 ELECTRONIC COMPONENTS - LONG-TERM STORAGE OF ELECTRONIC SEMICONDUCTOR DEVICES - PART 2: DETERIORATION MECHANISMS
BS EN 60738-1-4:2008 Thermistors. Directly heated positive step-function temperature coefficient Blank detail specification. Sensing application. Assessment level EZ
BS EN 60393-6:2016 Potentiometers for use in electronic equipment Sectional specification. Surface mount preset potentiometers
12/30239877 DC : 0 BS EN 60065 ED 8.0 - AUDIO, VIDEO AND SIMILAR ELECTRONIC APPARATUS - SAFETY REQUIREMENTS
09/30199223 DC : DRAFT JAN 2009 BS EN 60876-1 - FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - FIBRE OPTIC SPATIAL SWITCHES - PART 1: GENERIC SPECIFICATION
09/30210287 DC : 0 BS EN 60086-1 ED11 - PRIMARY BATTERIES - PART 1: GENERAL
BS EN 61811-1:2015 Electromechanical telecom elementary relays of assessed quality Generic specification and blank detail specification
02/208645 DC : DRAFT AUG 2002 IEC 60966-3 ED.2 - RADIO FREQUENCY AND COAXIAL CABLE ASSEMBLIES - PART 3: SECTIONAL SPECIFICATION FOR SEMI-FLEXIBLE COAXIAL CABLE ASSEMBLIES
BS EN 62595-1-1:2013 LCD backlight unit Generic specification
NF EN 61076 4 107 : 2002 CONNECTORS FOR ELECTRONIC EQUIPMENT - PART 4-107: PRINTED BOARD CONNECTORS WITH ASSESSED QUALITY - DETAIL SPECIFICATION FOR SHIELDED TWO-PART CONNECTORS HAVING A BASIC GRID OF 2,0 MM, FIXED PART WITH SOLDER AND PRESS-IN TERMINATIONS FOR PRINTED BOARDS, FREE PART WITH NON-ACCESSIBLE INSULATION DISPLACEMENT AND CRIMP TERMINATIONS
BS CECC 64000:1990 Harmonized system of quality assessment for electronic components: generic specification: film resistor networks
BS EN 61193-2:2007 Quality assessment systems Selection and use of sampling plans for inspection of electronic components and packages
IEC 61261-1:1994 Piezoelectric ceramic filters for use in electronic equipment - A specification in the IEC quality assessment system for electronic components (IECQ) - Part 1: Generic specification - Qualification approval
BS EN 61951-2:2017 Secondary cells and batteries containing alkaline or other non acid electrolytes. Secondary sealed cells and batteries for portable applications Nickel-metal hydride
11/30235301 DC : 0 BS EN 50547 - RAILWAY APPLICATIONS - BATTERIES FOR AUXILIARY POWER SUPPLY SYSTEMS
08/30181401 DC : DRAFT APR 2008 BS IEC 60747-14-1 - SEMICONDUCTOR DEVICES - PART 14-1: SEMICONDUCTOR SENSORS - GENERIC SPECIFICATION FOR SENSORS
BS 5558-2:1989 Controllers with analogue signals for use in industrial-process control systems Guidance for inspection and routine testing
I.S. EN 60623:2017 SECONDARY CELLS AND BATTERIES CONTAINING ALKALINE OR OTHER NON-ACID ELECTROLYTES - VENTED NICKEL-CADMIUM PRISMATIC RECHARGEABLE SINGLE CELLS
10/30216216 DC : 0 BS EN 60384-13:2006/A1 - FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 13: SECTIONAL SPECIFICATION - FIXED POLYPROPYLENE FILM DIELECTRIC METAL FOIL D.C. CAPACITORS
I.S. EN 61248-5:1998 TRANSFORMERS AND INDUCTORS FOR USE IN ELECTRONIC AND TELECOMMUNICATION EQUIPMENT - PART 5: SECTIONAL SPECIFICATION FOR PULSE TRANSFORMERS ON THE BASIS OF THE CAPABILITY APPROVAL PROCEDURE
I.S. EN 61167:2016 METAL HALIDE LAMPS - PERFORMANCE SPECIFICATION
BS EN 61853-1:2011 Photovoltaic (PV) module performance testing and energy rating Irradiance and temperature performance measurements and power rating
EN 196110 : 2002 SECTIONAL SPECIFICATION - ROTARY SWITCHES - CAPABILITY APPROVAL
DIN EN 168101:1992-09 BLANK DETAIL SPECIFICATION - QUARTZ CRYSTAL UNITS (CAPABILITY APPROVAL)
CEI EN 60384-19-1 : 2006 FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 19-1: BLANK DETAIL SPECIFICATION - FIXED METALLIZED POLYETHYLENE-TEREPHTHALATE FILM DIELECTRIC SURFACE MOUNT D.C. CAPACITORS - ASSESSMENT LEVEL EZ
BS EN 60393-1:2009 Potentiometers for use in electronic equipment Generic specification
BS EN 61314-1:2012 Fibre optic interconnecting devices and passive components. Fibre optic fan-outs Generic specification
UNE-EN 61951-1:2014 Secondary cells and batteries containing alkaline or other non-acid electrolytes - Portable sealed rechargeable single cells - Part 1: Nickel-cadmium
BS EN 62675:2014 Secondary cells and batteries containing alkaline or other non-acid electrolytes. Sealed nickel-metal hydride prismatic rechargeable single cells
97/231700 DC : DRAFT DEC 1997 IEC 60115-1 - FIXED RESISTORS FOR USE IN ELECTRONIC EQUIPMENT - PART 1: GENERIC SPECIFICATION
I.S. EN 62035:2014 DISCHARGE LAMPS (EXCLUDING FLUORESCENT LAMPS) - SAFETY SPECIFICATIONS
02/208921 DC : DRAFT AUG 2002 IEC 62052-21 ED.1 - ELECTRICITY METERING EQUIPMENT (A.C.) - GENERAL REQUIREMENTS, TESTS AND TEST CONDITIONS - PART 21: TARIFF AND LOAD CONTROL EQUIPMENT
BS EN 61076-4-110:2002 Connectors with assessed quality, for use in d.c., low-frequency analogue and in digital high speed data applications. Printed board connectors Detail specification for latched cable connector system having a basic grid of 2,0 mm including full shielding and latching function
08/30187414 DC : DRAFT AUG 2008 BS EN 60929 - AC-SUPPLIED ELECTRONIC BALLASTS FOR TUBULAR FLUORESCENT LAMPS - PERFORMANCE REQUIREMENTS
14/30311246 DC : 0 BS EN 60127-5 - MINIATURE FUSES - PART 5: GUIDELINES FOR QUALITY ASSESSMENT OF MINIATURE FUSE-LINKS
BS EN 140000:1995 Harmonized system of quality assessment for electronic components. Generic specification: fixed resistors
CEI EN 62197-1 : 2007 CONNECTORS FOR ELECTRONIC EQUIPMENT - QUALITY ASSESSMENT REQUIREMENTS - PART 1: GENERIC SPECIFICATION
BS EN 129200:1996 Harmonized system of quality assessment for electronic components. Sectional specification: fixed inductors with ceramic or ferrite core wound with copper wire for RF circuits
BS CECC 40203:1981 Specification for harmonized system of quality assessment for electronic components. Blank detail specification: fixed power resistors. Assessment level H
BS EN 60285:1995 Alkaline secondary cells and batteries. Sealed nickel-cadmium cylindrical rechargeable single cells
96/204185 DC : DRAFT APR 1996 PREN 131900 - SECTIONAL SPECIFICATION - FIXED CAPACITORS WITH METALLIZED ELECTRODES AND POLYPROPYLENE FILM DIELECTRIC FOR A.C. AND PULSE
BS EN 131800:1998 Harmonized system of quality assessment for electronic components. Sectional specification: fixed polypropylene film dielectric metal foil d.c. capacitors
BS EN 61169-1:2013 Radio-frequency connectors Generic specification. General requirements and measuring methods
07/30164787 DC : 0 EN 62134-1 - FIBRE OPTIC CLOSURES - PART 1: GENERIC SPECIFICATION
07/30164411 DC : 0 EN 61314-1 - FIBRE OPTIC FAN-OUTS - PART 1: GENERIC SPECIFICATION
IEC TS 62804-1:2015 Photovoltaic (PV) modules - Test methods for the detection of potential-induced degradation - Part 1: Crystalline silicon
02/208499 DC : DRAFT AUG 2002
BS EN 140401-801 : 2007 DETAIL SPECIFICATION: FIXED LOW POWER FILM SMD RESISTORS - RECTANGULAR - STABILITY CLASSES 0,1; 0,25; 0,5; 1
BS EN 62496-1:2009 Optical circuit boards General
BS EN 130300:1998 Harmonized system of quality assessment for electronic components. Sectional specification:aluminium electrolytic capacitors with solid and non-solid electrolyte
BS EN 120000:1996 Harmonized system of quality assessment for electronic components. General specification: semiconductor optoelectronic and liquid crystal devices
BS EN 60984:1993 Specification for sleeves of insulating material for live working
BS EN 140401-803 : 2007 DETAIL SPECIFICATION: FIXED LOW POWER FILM SMD RESISTORS - CYLINDRICAL - STABILITY CLASSES 0,05; 0,1; 0,25; 0,5; 1; 2
PD IEC/PAS 62816-2:2013 External electrode fluorescent lamps Performance specifications
BS EN 60127-5:2017 Miniature fuses Guidelines for quality assessment of miniature fuse-links
04/30113172 DC : DRAFT MAY 2004 IEC 60384-24 ED.1 - FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 24: SECTIONAL SPECIFICATION - SURFACE MOUNT FIXED TANTALUM ELECTROLYTIC CAPACITORS WITH CONDUCTIVE POLYMER SOLID ELECTROLYTE
DD IEC/TS 61994-4-4:2010 Piezoelectric and dielectric devices for frequency control and selection. Glossary Materials Materials for surface acoustic wave (SAW) devices
BS QC420101(1992) : 1992 VARISTORS FOR USE IN ELECTRONIC EQUIPMENT - BLANK DETAIL SPECIFICATION FOR SILICON CARBIDE SURGE SUPPRESSION VARISTORS - ASSESSMENT LEVEL E
PD IEC/PAS 62815-1:2013 Cold cathode fluorescent lamps Safety specifications
CEI EN 62099 : 2002 FIBRE OPTIC WAVELENGTH SWITCHES - GENERIC SPECIFICATION
CEI EN 61298-1 : 2011 PROCESS MEASUREMENT AND CONTROL DEVICES - GENERAL METHODS AND PROCEDURES FOR EVALUATING PERFORMANCE - PART 1: GENERAL CONSIDERATIONS
08/30191273 DC : DRAFT OCT 2008 BS EN 61977 - FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - FIBRE OPTIC FILTERS - GENERIC SPECIFICATION
CSA CEI/IEC 300.2 : 0 DEPENDABILITY MANAGEMENT - PART 2: DEPENDABILITY PROGRAMME ELEMENTS AND TASKS
IEC 60947-5-1 : 4.0 LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 5-1: CONTROL CIRCUIT DEVICES AND SWITCHING ELEMENTS - ELECTROMECHANICAL CONTROL CIRCUIT DEVICES
BS EN 60832:1997 Specification for insulating poles (insulating sticks) and universal tool attachments (fittings) for live working
BS EN 61951-1:2017 Secondary cells and batteries containing alkaline or other non-acid electrolytes. Secondary sealed cells and batteries for portable applications Nickel-Cadmium
BS EN 60368-1:2000 Piezoelectric filters Generic specification
BS EN 60622:2003 Secondary cells and batteries containing alkaline or other non-acid electrolytes. Sealed nickel-cadmium prismatic rechargeable single cells
08/30169101 DC : 0 BS EN 61978-1 - FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - FIBRE OPTIC PASSIVE CHROMATIC DISPERSION COMPENSATORS - PART 1: GENERIC SPECIFICATION
09/30209389 DC : 0 BS EN 60115-8-1 - FIXED RESISTORS FOR USE IN ELECTRONIC EQUIPMENT - PART 8-1: BLANK DETAIL SPECIFICATION - FIXED CHIP RESISTORS - ASSESSMENT LEVEL E
CEI EN 60368-1 : 2006 PIEZOELECTRIC FILTERS OF ASSESSED QUALITY - PART 1: GENERIC SPECIFICATION
I.S. EN 61076-2-102:2002 CONNECTORS FOR ELECTRONIC EQUIPMENT - PART 2-102: CIRCULAR CONNECTORS WITH ASSESSED QUALITY - DETAIL SPECIFICATION FOR PLUGS AND JACKS FOR EXTERNAL LOW VOLTAGE POWER SUPPLY
BS EN 61204-6:2001 Low voltage power supplies, d.c. output Requirements for low-voltage power supplies of assessed performance
BS EN 60966-3:2009 Radio frequency and coaxial cable assemblies Sectional specification for semi-flexible coaxial cable assemblies
BS CECC 31801:1988 Specification for harmonized system of quality assessment for electronic components. Blank detail specification: fixed polypropylene film dielectric metal foil d.c. capacitors
I.S. EN 61314-1:2012 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - FIBRE OPTIC FAN-OUTS - PART 1: GENERIC SPECIFICATION (IEC 61314-1:2011 (EQV))
PD IEC TR 62059-21:2002 Electricity metering equipment. Dependability Collection of meter dependability data from the field
93/200044 DC : 0 PREN 132600 - SECTIONAL SPECIFICATION - SURFACE MOUNTED MICA CAPACITORS - QUALIFICATION APPROVAL
CSA C61215 :2008 CRYSTALLINE SILICON TERRESTRIAL PHOTOVOLTAIC (PV) MODULES - DESIGN QUALIFICATION AND TYPE APPROVAL
CEI EN 61076-4-108 : 2003 CONNECTORS FOR ELECTRONIC EQUIPMENT PART 4-108: PRINTED BOARD CONNECTORS WITH ASSESSED QUALITY DETAIL SPECIFICATION FOR CABLE-TO-BOARD CONNECTORS, WITH A MODULAR PITCH OF 25 MM AND INTEGRATED SHIELDING FUNCTION, APPLICABLE FOR TRANSVERSE PACKING DENSITY OF 15 MM, HAVING A BASIC GRID OF 2,5 MM IN ACCORDANCE WITH IEC 60917-1
I.S. EN 60432-3:2013 INCANDESCENT LAMPS - SAFETY SPECIFICATIONS - PART 3: TUNGSTENHALOGEN LAMPS (NON-VEHICLE) (IEC 60432-3:2012 (EQV))
03/308250 DC : DRAFT JUNE 2003 IEC 60923 ED.3.0 - AUXILIARIES FOR LAMPS - BALLASTS FOR DISCHARGE LAMPS (EXCLUDING TUBULAR FLUORESCENT LAMPS) - PERFORMANCE REQUIREMENTS
03/100530 DC : DRAFT JUNE 2003 IEC 61076-3 ED 2 - CONNECTORS FOR ELECTRONIC EQUIPMENT - PART 3: RECTANGULAR CONNECTORS - SECTIONAL SPECIFICATION
CECC 75301-802 : 1994 RECTANGULAR CONNECTORS FOR FREQUENCIES BELOW 3 MHZ, TRAPEZOIDAL SHAPED SHELLS AND ROUND CONTACTS 01 MM WITH CRIMP, SOLDER AND PRESS-IN TERMINANONS FOR PRINTED BOARDS
BS CECC 18001:1984 Specification for harmonized system of quality assessment for electronic components. Blank detail specification: dry reed change-over contact units, mechanically biased, for general application
I.S. EN 60874-1:2012 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - CONNECTORS FOR OPTICAL FIBRES AND CABLES - PART 1: GENERIC SPECIFICATION (IEC 60874-1:2011 (EQV))
BS CECC20007(1991) : 1991 AMD 8006 HARMONIZED SYSTEM OF QUALITY ASSESSMENT FOR ELECTRONIC COMPONENTS: LIQUID CRYSTAL DISPLAYS-MONOCHROME LCDs WITHOUT ELECTRONIC CIRCUIT
NF EN 112000 : 2014 GENERIC SPECIFICATION: IMAGE CONVERTER AND IMAGE INTENSIFIER TUBES
BS QC 763000(1990) : AMD 6754 HARMONIZED SYSTEM OF QUALITY ASSESSMENT FOR ELECTRONIC COMPONENTS. FILM AND HYBRID FILM INTEGRATED CIRCUITS. GENERIC SPECIFICATION
07/30161553 DC : 0 BS EN 60758 - SYNTHETIC QUARTZ CRYSTAL - SPECIFICATIONS AND GUIDE TO THE USE
09/30196098 DC : 0 BS EN 61003-2 - INDUSTRIAL-PROCESS CONTROL SYSTEMS - INSTRUMENTS WITH ANALOGUE INPUTS AND TWO OR MULTI-STATE OUTPUTS - PART 2: GUIDANCE FOR INSPECTION AND ROUTINE TESTING
04/30113200 DC : DRAFT MAY 2004 IEC 60384-25 ED.1 - FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 25: SECTIONAL SPECIFICATION - SURFACE MOUNT FIXED ALUMINIUM ELECTROLYTIC CAPACITORS WITH CONDUCTIVE POLYMER SOLID ELECTROLYTE
BS EN 175301-801:2006 Detail specification. High density rectangular connectors, round removable crimp contacts
06/30155922 DC : 0 BS EN 140100 - SECTIONAL SPECIFICATION - FIXED LOW POWER FILM RESISTORS
BS EN 62391-2:2006 Fixed electric double-layer capacitors for use in electronic equipment Sectional specification. Electric double-layer capacitors for power application
11/30242269 DC : 0 BS EN 62675 - SECONDARY CELLS AND BATTERIES CONTAINING ALKALINE OR OTHER NON-ACID ELECTROLYTES - SEALED NICKEL-METAL HYDRIDE PRISMATIC RECHARGEABLE SINGLE CELLS FOR INDUSTRIAL APPLICATIONS
BS EN 60384-19-1:2006 Fixed capacitors for use in electronic equipment Blank detail specification. Fixed metallized polyethylene-terephthalate film dielectric surface mount d.c. capacitors. Assessment level EZ
10/30234803 DC : 0 BS EN 61169-1 ED.2 - RADIO FREQUENCY CONNECTORS - PART 1: GENERIC SPECIFICATION - GENERAL REQUIREMENTS AND MEASURING METHODS
DEFSTAN 22-48/3(2010) : 2010 SPECIFICATION FOR POSITIVE TEMPERATURE COEFFICIENT THERMISTORS FOR THERMAL PROTECTION OF ELECTRIC MOTORS
CEI EN 62052-21 : 2005 ELECTRICITY METERING EQUIPMENT (AC) - GENERAL REQUIREMENTS, TESTS AND TEST CONDITIONS - PART 21: TARIFF AND LOAD CONTROL EQUIPMENT
CLC/TS 61111:2006 Matting of insulating material for electrical purposes
BS EN 168000:1996 Harmonized system of quality assessment for electronic components. Generic specification: quartz crystal units
06/30155905 DC : DRAFT SEP 2006 BS EN 140401-803 - DETAIL SPECIFICATION - FIXED LOW POWER FILM SMD RESISTORS - CYLINDRICAL - STABILITY CLASSES 0,05; 0,1; 0,25; 0,5; 1; 2
BS EN 130800:2001 Harmonized system of quality assessment for electronic components. Sectional specification. Tantalum surface mounting capacitors
I.S. EN 138000:1998 FIXED INDUCTORS FOR ELECTROMAGNETIC INTERFERENCE SUPPRESSION (INDUCTORS FOR WHICH SAFETY TESTS ARE REQUIRED) (GENERIC SPECIFICATION)
CSA E1048 : 1998 CAPACITORS FOR USE IN TUBULAR FLUORESCENT AND OTHER DISCHARGE LAMP CIRCUITS - GENERAL AND SAFETY REQUIREMENTS
BS EN 62246-1-1:2013 Reed switches Generic specification. Quality assessment
BS EN 60603-13:1998 Connectors for frequencies below 3 MHz for use with printed boards Detail specification for two-part connectors of assessed quality, for printed boards for basic grid of 2,54 mm (0,1 in) with free connectors for non-accessible insulation displacement terminations (ID)
CEI EN 60384-18-2 : 2009 FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 18-2: BLANK DETAIL SPECIFICATION - FIXED ALUMINIUM ELECTROLYTIC SURFACE MOUNT CAPACITORS WITH NON-SOLID ELECTROLYTE - ASSESSMENT LEVEL EZ
BS EN 60966-4:2003 Radio frequency and coaxial cable assemblies Sectional specification for semi-rigid coaxial cable assemblies
BS EN 61076-4-105:1998 Connectors with assessed quality, for use in d.c., low-frequency analogue and in digital high speed data applications. Printed board connectors Detail specification for 9 mm circular connector with 3 to 8 contacts for use in a wide range of applications including the telecommunication and audio industry
BS 7743(1994) : AMD 8958 SADDLES, POLE CLAMPS (STICK CLAMPS) AND ACCESSORIES FOR LIVE WORKING
BIS IS 14686-4 : 2012 RADIO FREQUENCY AND COAXIAL CABLE ASSEMBLIES - PART 4: SECTIONAL SPECIFICATION FOR SEMI-RIGID COAXIAL CABLE ASSEMBLIES
BS EN 130500:1998 Harmonized system of quality assessment for electronic components. Sectional specification: fixed metallized polycarbonate film dielectric capacitors for direct current
BS QC 400102:1992 Specification for harmonized system of quality assessment for electronic components. Fixed resistors for use in electronic equipment. Blank detail specification. Fixed low-power non-wirewound resistors. Assessment level F
98/230855 DC : DRAFT APRIL 1998 IEC 61076-4-112 - CONNECTORS WITH ASSESSED QUALITY, FOR USE IN D.C, LOW-FREQUENCY ANALOGUE AND IN DIGITAL HIGH-SPEED DATA APPLICATIONS - PART 4: PRINTED BOARD CONNECTORS - SECTION 112 - DETAIL SPECIFICATION FOR TWO-PART CONNECTORS FOR PRINTED BOARDS FOR BASIC GRID OF 2,00 MM, WITH SQUARE MALE CONTACTS OF 0,50 X 0,50 MM
08/30176950 DC : DRAFT JAN 2008 BS EN 60770-2 - TRANSMITTERS FOR USE IN INDUSTRIAL-PROCESS CONTROL SYSTEMS - PART 2: METHODS FOR INSPECTION AND ROUTINE TESTING
IEC PAS 62074-1:2007 Fibre optic WDM devices - Part 1: Generic specification
CSA IEC 61646 : 2010 THIN-FILM TERRESTRIAL PHOTOVOLTAIC (PV) MODULES - DESIGN QUALIFICATION AND TYPE APPROVAL
DIN EN 60285:2000-07 ALKALINE SECONDARY CELLS AND BATTERIES - SEALED NICKEL-CADMIUM CYLINDRICAL RECHARGEABLE SINGLE CELLS
CAN/CSA-E926-98 (R2017) Auxiliaries for Lamps - Starting Devices (Other Than Glow Starters) - General and Safety Requirements (Adopted CEI/IEC 926:1995, second edition, 1995-01, with Canadian deviations) | Appareils auxiliaires pour lampes - Dispositifs d\'amorçage (autres que starters à lueur) - Prescriptions générales et prescriptions de sécurité(norme CEI/IEC 926:1995 adoptée, deuxième édition, 1995-01, avec exigences propres au Canada)
I.S. EN 60947-6-2:2003 LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - MULTIPLE FUNCTION EQUIPMENT - CONTROL AND PROTECTIVE SWITCHING DEVICES (OR EQUIPMENT) (CPS)
IEC 60947-2 REDLINE : 5ED 2016 LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 2: CIRCUIT-BREAKERS
NF EN 60938-1 : 2008 AMD 1 2008 FIXED INDUCTORS FOR ELECTROMAGNETIC INTERFERENCE SUPPRESSION - PART 1: GENERIC SPECIFICATION
CAN/CSA-E432-2-98 (R2017) Safety Specifications for Incandescent Lamps - Part 2: Tungsten Halogen Lamps for Domestic and Similar General Lighting Purposes (adopted IEC 432-2:1994, first edition, including Amendment 1:1996 and Amendment 2:1997, with Canadian deviations) | Prescriptions de sécurité pour lampes à incandescence - Partie 2: Lampes tungstène-halogène pour usage domestique et éclairage général similaire (norme CEI 432-2:1994 adoptée, première édition, avec l\'amendement 1:1996 and l\'amendement 2:1997, avec exigences propres au Canada)
UNE-EN 62035:2015 Discharge lamps (excluding fluorescent lamps) - Safety specifications
CSA C22.2 No. 61730-2 :2011 PHOTOVOLTAIC (PV) MODULE SAFETY QUALIFICATION - PART 2: REQUIREMENTS FOR TESTING
I.S. EN 136000:1994 MAGNETRONS (GENERIC SPECIFICATION)
CSA C22.2 No. 61730-2 : 2011 : INC : AMD 1 : 2013 : R2016 PHOTOVOLTAIC (PV) MODULE SAFETY QUALIFICATION - PART 2: REQUIREMENTS FOR TESTING
BS EN 60662:2012+A11:2019 High-pressure sodium vapour lamps. Performance specifications
CEI EN 60384-22-1 : 2005 FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 22-1: BLANK DETAIL SPECIFICATION: FIXED SURFACE MOUNT MULTILAYER CAPACITORS OF CERAMIC DIELECTRIC, CLASS 2 - ASSESSMENT LEVEL EZ
BS EN 60947-3 : 2009 LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 3: SWITCHES, DISCONNECTORS, SWITCH-DISCONNECTORS AND FUSE-COMBINATION UNITS
IEC 61951-2 REDLINE : 4ED 2017 SECONDARY CELLS AND BATTERIES CONTAINING ALKALINE OR OTHER NON-ACID ELECTROLYTES - SECONDARY SEALED CELLS AND BATTERIES FOR PORTABLE APPLICATIONS - PART 2: NICKEL-METAL HYDRIDE
I.S. EN 60947-2:2017 LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 2: CIRCUIT-BREAKERS
BS EN 60115-1 : 2011 FIXED RESISTORS FOR USE IN ELECTRONIC EQUIPMENT - PART 1: GENERIC SPECIFICATION
NF EN 61076 4 101 : 2002 CONNECTORS FOR ELECTRONIC EQUIPMENT - PART 4-101: PRINTED BOARD CONNECTORS WITH ASSESSED QUALITY - DETAIL SPECIFICATION FOR TWO-PART CONNECTOR MODULES, HAVING A BASIC GRID OF 2,0 MM FOR PRINTED BOARDS AND BLACKPLANES IN ACCORDANCE WITH IEC 60917
IEC 61747-1-1:2014 Liquid crystal display devices - Part 1-1: Generic - Generic specification
BS EN 167000:1993 Harmonized system of quality assessment for electronic components. Generic specification: piezoelectric filters
BS EN 60947-5-1:2017 Low-voltage switchgear and controlgear Control circuit devices and switching elements. Electromechanical control circuit devices
I.S. CLC/TS 61111:2006 MATTING OF INSULATING MATERIAL FOR ELECTRICAL PURPOSES
IECQ 03-3-2:2014 IEC QUALITY ASSESSMENT SYSTEM FOR ELECTRONIC COMPONENTS (IECQ SYSTEM) - RULES OF PRODECURE - PART 3-2: IECQ APPROVED COMPONENT PRODUCTS, RELATED MATERIALS & ASSEMBLIES SCHEME, IECQ APPROVED COMPONENT - AUTOMOTIVE QUALIFICATION PROGRAMME (IECQ AC-AQP)
BS EN 61167:2011 Metal halide lamps. Performance specification
I.S. EN 60939-2-1:2004 COMPLETE FILTER UNITS FOR RADIO INTERFERENCE SUPPRESSION - PART 2-1: BLANK DETAIL SPECIFICATION - PASSIVE FILTER UNITS FOR ELECTROMAGNETIC INTERFERENCE SUPPRESSION - FILTERS FOR WHICH SAFETY TESTS ARE REQUIRED (ASSESSMENT LEVEL D/DZ)
BS 7520:1995 Guide to quality assurance plans for tools for live working
I.S. EN 62496-1:2009 OPTICAL CIRCUIT BOARDS - PART 1: GENERAL
I.S. EN 61730-2:2007 PHOTOVOLTAIC (PV) MODULE SAFETY QUALIFICATION - PART 2: REQUIREMENTS FOR TESTING (IEC 61730-2:2004 (MOD))
I.S. EN 60384-8-1:2005 FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 8-1: BLANK DETAIL SPECIFICATION: FIXED CAPACITORS OF CERAMIC DIELECTRIC, CLASS 1 - ASSESSMENT LEVEL EZ
I.S. EN 160201:1998 MICROWAVE MODULAR ELECTRONIC UNITS OF ASSESSED QUALITY - CAPABILITY APPROVAL (BLANK DETAIL SPECIFICATION)
BS EN 60384-2:2012 Fixed capacitors for use in electronic equipment Sectional specification. Fixed metallized polyethylene terephthalate film dielectric d.c. capacitors
I.S. EN 61076-4-102:1998 CONNECTORS WITH ASSESSED QUALITY, FOR USE IN D.C., LOW-FREQUENCY ANALOGUE AND IN DIGITAL HIGH SPEED DATA APPLICATIONS - PART 4: PRINTED BOARD CONNECTORS - SECTION 102: DETAIL SPECIFICATION FOR TWO-PART SINGLE-POLE CONNECTORS, FOR MULTIPLE USES ON PLUG-IN UNITS, WITH PRE-CENTRING, CODING AND EARLY MATING FEATURES, HAVING A METRIC GRID IN ACCORDANCE WITH IEC 60917
BS EN 60384-4-1:2007 Fixed capacitors for use in electronic equipment Blank detail specification. Fixed aluminium electrolytic capacitors with non-solid electrolyte. Assessment level EZ
I.S. EN 140101-806:2009 DETAIL SPECIFICATION: FIXED LOW POWER FILM RESISTORS - METAL FILM RESISTORS ON HIGH GRADE CERAMIC, CONFORMAL COATED OR MOLDED, AXIAL OR PREFORMED LEADS
CEI EN 60966-3 : 2010 RADIO FREQUENCY AND COAXIAL CABLE ASSEMBLIES - PART 3: SECTIONAL SPECIFICATION FOR SEMI-FLEXIBLE COAXIAL CABLE ASSEMBLIES
I.S. EN 61076-5:2002 CONNECTORS FOR USE IN D.C., LOW-FREQUENCY ANALOGUE AND DIGITAL HIGH-SPEED DATA APPLICATIONS - PART 5: IN-LINE SOCKETS WITH ASSESSED QUALITY - SECTIONAL SPECIFICATION
I.S. EN 175200:1998 CIRCULAR CONNECTORS (SECTIONAL SPECIFICATION)
I.S. EN 123000:1994 GENERIC SPECIFICATION: PRINTED BOARDS
I.S. EN 50286:1999 ELECTRICAL INSULATING PROTECTIVE CLOTHING FOR LOW-VOLTAGE INSTALLATIONS
I.S. EN 61358:1997 ACCEPTANCE INSPECTION FOR DIRECT CONNECTED ALTERNATING CURRENT STATIC WATT-HOUR METERS FOR ACTIVE ENERGY (CLASSES 1 AND 2)
I.S. EN 60384-21-1:2004 FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 21-1: BLANK DETAIL SPECIFICATION: FIXED SURFACE MOUNT MULTILAYER CAPACITORS OF CERAMIC DIELECTRIC, CLASS 1 - ASSESSMENT LEVEL EZ
I.S. EN 61978-1:2014 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - FIBRE OPTIC PASSIVE CHROMATIC DISPERSION COMPENSATORS - PART 1: GENERIC SPECIFICATION
BS EN 61199 : 2011 SINGLE-CAPPED FLUORESCENT LAMPS - SAFETY SPECIFICATIONS
BS EN IEC 60810:2018 Lamps, light sources and led packages for road vehicles. Performance requirements
I.S. EN 130900:1998 FIXED POLYSTYRENE FILM DIELECTRIC METAL FOIL D.C. CAPACITORS (SECTIONAL SPECIFICATION)
BS EN 140401:2009 Blank Detail Specification. Fixed low power film surface mount (SMD) resistors
I.S. EN 133000:1998 PASSIVE FILTER UNITS FOR ELECTROMAGNETIC INTERFERENCE SUPPRESSION (GENERIC SPECIFICATION)
CSA E61951-1 : 2014 SECONDARY CELLS AND BATTERIES CONTAINING ALKALINE OR OTHER NON-ACID ELECTROLYTES - PORTABLE SEALED RECHARGEABLE SINGLE CELLS - PART 1: NICKEL-CADMIUM
I.S. EN 60950-1:2006 INFORMATION TECHNOLOGY EQUIPMENT - SAFETY - PART 1: GENERAL REQUIREMENTS (IEC 60950-1:2005 (MOD))
CECC 75101-807 : 1994 MODULAR TWO-PART CONNECTORS FOR PRINTED BOARDS AND BACKPLANES, GRIDOF 2.5 mm - ACCORDING TO IEC 917 (DETAIL SPECIFICATION)
IEC 60947-2:2016 Low-voltage switchgear and controlgear - Part 2: Circuit-breakers
IEC 60875-3:1992 Fibre optic branching devices - Part 3: Sectional specification - Wavelength selective branching devices
IEC PAS 62815-1:2013 Cold cathode fluorescent lamps - Part 1: Safety specifications
BIS IS 16048-2 : 2013 SECONDARY CELLS AND BATTERIES CONTAINING ALKALINE OR OTHER NON-ACID ELECTROLYTES - PORTABLE SEALED RECHARGEABLE SINGLE CELLS - PART 2: NICKEL-METAL HYDRIDE
EN 61951-1:2017 Secondary cells and batteries containing alkaline or other non-acid electrolytes - Secondary sealed cells and batteries for portable applications - Part 1: Nickel-cadmium
IEC 60571-1:1990 Electronic equipment used on rail vehicles. Part 1: General requirements and tests for electronic equipment
NF EN 61076 3 101 : 1998 CONNECTORS WITH ASSESSED QUALITY, FOR USE IN D.C. LOW-FREQUENCY ANALOGUE AND IN DIGITAL HIGH-SPEED DATA APPLICATIONS - PART 3: RECTANGULAR CONNECTORS - SECTION 101: DETAIL SPECIFICATION FOR A RANGE OF SHIELDED CONNECTORS WITH TRAPEZOIDAL SHAPED SHELLS AND NON-REMOVABLE RECTANGULAR CONTACTS ON A 1,27 MM X 2,54 MM CENTER-LINE
CSA C22.2 No. 61730-2 : 2011 : INC : AMD 1 : 2013 PHOTOVOLTAIC (PV) MODULE SAFETY QUALIFICATION - PART 2: REQUIREMENTS FOR TESTING
I.S. EN 60393-1:2009 POTENTIOMETERS FOR USE IN ELECTRONIC EQUIPMENT - PART 1: GENERIC SPECIFICATION
IEC 61253-2:1993 Piezoelectric ceramic resonators - A Specification in the IEC quality assessment system for electronic components (IECQ) - Part 2: Sectional specification - Qualification approval
IEC 62679-1-1:2014 Electronic paper displays - Part 1-1: Terminology
IEC 60115-1:2008 Fixed resistors for use in electronic equipment - Part 1: Generic specification
IEC 60947-4-1:2009+AMD1:2012 CSV Low-voltage switchgear and controlgear - Part 4-1: Contactors and motor-starters - Electromechanical contactors and motor-starters
IEC 61178-3-1:1993 Quartz crystal units - A specification in the IEC Quality Assessment System for Electronic Components (IECQ) - Part 3: Sectional specification - Qualification approval - Section 1: Blank detail specification
IEC 60947-5-1:2016 RLV Low-voltage switchgear and controlgear - Part 5-1: Control circuit devices and switching elements - Electromechanical control circuit devices
I.S. EN 141101:1994 LEAD-SCREW ACTUATED AND ROTARY PRESET POTENTIOMETERS (BLANK DETAIL SPECIFICATION)
I.S. EN 131700:1998 FIXED CAPACITORS FOR DIRECT CURRENT WITH ELECTRODES OF THIN METAL FOILS AND A POLYCARBONATE FILM DIELECTRIC (SECTIONAL SPECIFICATION)
I.S. CECC 75101-807:1994 MODULAR TWO-PART CONNECTORS FOR PRINTED BOARDS AND BACKPLANES, GRID OF 2.5 MM - (ACCORDING TO IEC 917) (DETAIL SPECIFICATION)
IEC 60393-1:2008 Potentiometers for use in electronic equipment - Part 1: Generic specification
IEC 60747-10:1991 Semiconductor devices - Part 10: Generic specification for discrete devices and integrated circuits
IEC 60875-2:1992 Fibre optic branching devices - Part 2: Sectional specification: Non wavelength selective branching devices
I.S. EN 50321:2003 ELECTRICITY INSULATING FOOTWEAR FOR WORKING ON LOW VOLTAGE INSTALLATIONS
I.S. EN 60938-1:1999 FIXED INDUCTORS FOR ELECTROMAGNETIC INTERFERENCE SUPPRESSION - PART 1: GENERIC SPECIFICATION
I.S. EN 60115-1:2011 FIXED RESISTORS FOR USE IN ELECTRONIC EQUIPMENT - PART 1: GENERIC SPECIFICATION (IEC 60115-1:2008, MODIFIED)
I.S. EN 113000:1994 GENERIC SPECIFICATION: CAMERA TUBES
EN 130800 : 2000 AMD 1 2003 HARMONIZED SYSTEM OF QUALITY ASSESSMENT FOR ELECTRONIC COMPONENTS ASSESSMENT FOR ELECTRONIC COMPONENTS - SECTIONAL SPECIFICATION: TANTALUM SURFACE MOUNTING CAPACITORS
NF EN 60539-2 : 2005 AMD 1 2011 DIRECTLY HEATED NEGATIVE TEMPERATURE COEFFICIENT THERMISTORS - PART 2: SECTIONAL SPECIFICATION - SURFACE MOUNT NEGATIVE TEMPERATURE COEFFICIENT THERMISTORS
NF EN 60086-1 : 2011 PRIMARY BATTERIES - PART 1: GENERAL
EN 175101-809:2004/corrigendum Jun. 2005 DETAIL SPECIFICATION: TWO-PART CONNECTORS FOR PRINTED BOARDS HAVING A GRID OF 2,54 MM, SHORT VERSION IN COMPLIANCE WITH CECC 75 101-801, WITH ASSESSED QUALITY
IEC 61988-5:2009 Plasma display panels - Part 5: Generic specification
IEC 60368-1:2000+AMD1:2004 CSV Piezoelectric filters of assessed quality - Part 1: Genericspecification
IEC 61219:1993 Live working - Earthing or earthing and short-circuiting equipment using lances as a short-circuiting device - Lance earthing
IEC 61038:1990+AMD1:1996+AMD2:1998 CSV Electricity metering - Tariff and load control - Particular requirements for time switches
UNE-EN 60947-4-1:2011 Low-voltage switchgear and controlgear - Part 4-1: Contactors and motor-starters - Electromechanical contactors and motor-starters
IEC 61169-1:2013 Radio frequency connectors - Part 1: Generic specification - General requirements and measuring methods
IEC 61436:1998 Secondary cells and batteries containing alkaline or other non-acid electrolytes - Sealed nickel-metal hydride rechargeable single cells
IEC 60539-2:2003+AMD1:2010 CSV Directly heated negative temperature coefficient thermistors - Part 2: Sectional specification - Surface mount negative temperature coefficient thermistors
IEC 60622:2002 Secondary cells and batteries containing alkaline or other non-acid electrolytes - Sealed nickel-cadmium prismatic rechargeable single cells
IEC 62391-2:2006 Fixed electric double-layer capacitors for use in electronic equipment - Part 2: Sectional specfication - Electric double layer capacitors for power application
18/30375223 DC BS EN 60947-4-3. Low-voltage switchgear and controlgear Part 4-3. Contactors and motor-starters. Semiconductor controllers and semiconductor contactors for non-motor loads
IEC 60393-6:2015 Potentiometers for use in electronic equipment - Part 6: Sectional specification - Surface mount preset potentiometers
IEC 60966-2-1:2008 Radio frequency and coaxial cable assemblies - Part 2-1: Sectional specification for flexible coaxial cable assemblies
IEC 61978-1:2014 Fibre optic interconnecting devices and passive components - Fibre optic passive chromatic dispersion compensators - Part 1: Generic specification
CSA C22.2 No. 60950-1 :2007 INFORMATION TECHNOLOGY EQUIPMENT - SAFETY - PART 1: GENERAL REQUIREMENTS
CSA C22.2 No. 60950-1 : 2007 : INC : AMD 1 : 2011 : R2012 INFORMATION TECHNOLOGY EQUIPMENT - SAFETY - PART 1: GENERAL REQUIREMENTS
EN 62384:2006/A1:2009 DC OR AC SUPPLIED ELECTRONIC CONTROL GEAR FOR LED MODULES - PERFORMANCE REQUIREMENTS
I.S. EN 61646:2008 THIN-FILM TERRESTRIAL PHOTOVOLTAIC (PV) MODULES - DESIGN QUALIFICATION AND TYPE APPROVAL
OVE/ONORM EN 60384-16 : 2006 FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 16: SECTIONAL SPECIFICATION - FIXED METALLIZED POLYPROPYLENE FILM DIELECTRIC D.C. CAPACITORS
CSA C22.2 No. 60950-1 : 2007 : INC : AMD 2 : 2014 : R201200 INFORMATION TECHNOLOGY EQUIPMENT - SAFETY - PART 1: GENERAL REQUIREMENTS
UNE-EN 60950-1:2007 Information technology equipment - Safety - Part 1: General requirements
CSA C22.2 No. 60950-1 : 2007 : R2012 INFORMATION TECHNOLOGY EQUIPMENT - SAFETY - PART 1: GENERAL REQUIREMENTS
CSA C22.2 No. 60950-1 : 2007 : INC : UPD 1 : 2011 INFORMATION TECHNOLOGY EQUIPMENT - SAFETY - PART 1: GENERAL REQUIREMENTS
CSA C22.2 No. 60950-1 : 2007 : INC : AMD 2 : 2014 : R2016 INFORMATION TECHNOLOGY EQUIPMENT - SAFETY - PART 1: GENERAL REQUIREMENTS
UNE-EN 60947-3:2009 Low-voltage switchgear and controlgear - Part 3: Switches, disconnectors, switch-disconnectors and fuse-combination units
EN 61167:2016 Metal halide lamps - Performance specification
EN 131700:1997 Sectional Specification: Fixed capacitors for direct current with electrodes of thin metal foils and a polycarbonate film dielectric
IEC 61811-1:2015 Electromechanical telecom elementary relays of assessed quality - Part 1: Generic specification and blank detail specification
EN 141101:1992 Blank Detail Specification: Lead-screw actuated and rotary preset potentiometers
EN 147000:1993 Generic Specification: Sockets for use with electrical relays of assessed quality
EN 130900 : 1997 FIXED POLYSTYRENE FILM DIELECTRIC METAL FOIL D.C. CAPACITORS (SECTIONAL SPECIFICATION)
CEI EN 60758 : 2010 SYNTHETIC QUARTZ CRYSTAL - SPECIFICATIONS AND GUIDELINES FOR USE
CEI EN 61076-4-103 : 2001 CONNECTORS FOR USE IN D.C. LOW - FREQUENCY ANALOGUE AND DIGITAL HIGH SPEED DATA APPLICATIONS PART 4-103: PRINTED BOARD CONNECTORS WITH ASSESSED QUALITY DETAIL SPECIFICATION FOR TWO-PART CONNECTORS WITH SHIELDING AND A BASIC GRID OF 2,5 MM
BS CECC 40102:1981 Specification for harmonized system of quality assessment for electronic components. Blank detail specification: fixed low power non-wirewound resistors. Assessment level M
BS CECC36000(1978) : 1978 AMD 7581 HARMONIZED SYSTEM OF QUALITY ASSESSMENT FOR ELECTRONIC COMPONENTS: GENERIC SPECIFICATION: MAGNETRONS
BS 7692(1993) : 1993 AMD 9358 INSULATING POLES (INSULATING STICKS) AND UNIVERSAL TOOL ATTACHMENTS (FITTINGS) FOR LIVE WORKING
BS CECC 13000(1981) : 1981 AMD 7573 HARMONIZED SYSTEM OF QUALITY ASSESSMENT FOR ELECTRONIC COMPONENTS - GENERIC SPECIFICATION - CAMERA TUBES
02/203178 DC : 0 PREN 140101-806 - DETAIL SPECIFICATION - FIXED LOW POWER NON-WIRE WOUND RESISTORS - METAL FILM RESISTORS ON HIGH GRADE CERAMIC, CONFORMAL COATED OR MOLDED, AXIAL OR PREFORMED LEADS - ASSESSMENT LEVEL Z - VERSION A: WITH 100-%-TEST - VERSION E: WITH FAILURE RATE LEVEL AND 100-%-TEST - STABILITY CLASSES 0,05; 0,1; 0,25; 0,5; 1; 2
BIS IS/IEC 60947-4-2 : 1999 LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 4: CONTRACTORS AND MOTOR-STARTERS - SECTION 2: AC SEMICONDUCTOR MOTOR CONTROLLERS AND STARTERS
12/30260687 DC : 0 BS EN 60384-20 - FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 20: SECTIONAL SPECIFICATION - FIXED METALLIZED POLYPHENYLENE SULFIDE FILM DIELECTRIC SURFACE MOUNT D.C. CAPACITORS
BS EN 60947-4-1 : 2010 LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 4-1: CONTACTORS AND MOTOR-STARTERS - ELECTROMECHANICAL CONTACTORS AND MOTOR-STARTERS
BS EN 60966-2-1:2009 Radio frequency and coaxial cable assemblies Sectional specification for flexible coaxial cable assemblies
NF EN 62093 : 2005 BALANCE-OF SYSTEM COMPONENTS FOR PHOTOVOLTAIC SYSTEMS - DESIGN QUALIFICATION NATURAL ENVIRONMENTS
BS EN 60384-26:2010 Fixed capacitors for use in electronic equipment Sectional specification. Fixed aluminium electrolytic capacitors with conductive polymer solid electrolyte
10/30216212 DC : 0 BS EN 60384-2:2005/A1 - FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 2: SECTIONAL SPECIFICATION: FIXED METALLIZED POLYETHYLENE- TEREPHTHALATE FILM DIELECTRIC D.C. CAPACITORS
BS EN 60384-8-1:2005 Fixed capacitors for use in electronic equipment Blank detail specification. Fixed capacitors of ceramic dielectric, Class 1. Assessment level EZ
BS EN 140100:2008 Sectional specification. Fixed low power film resistors
I.S. EN 131800:1998 FIXED POLYPROPYLENE FILM DIELECTRIC METAL FOIL D.C. CAPACITORS (SECTIONAL SPECIFICATION)
BS EN 130200:1993 Harmonized system of quality assessment for electronic components. Sectional specification: fixed tantalum capacitors with non-solid or solid electrolyte
BS EN 175301-803:2006 Detail specification: rectangular connectors. Flat contacts, 0,8 mm thickness, locking screw not detachable
BS EN 62435-2:2017 Electronic components. Long-term storage of electronic semiconductor devices Deterioration mechanisms
NF EN 61195 : 2001 AMD 2 2015 DOUBLE-CAPPED FLUORESCENT LAMPS - SAFETY SPECIFICATIONS
NF EN 61076 4 102 : 1998 CONNECTORS WITH ASSESSED QUALITY FOR USE IN D.C., LOW-FREQUENCY ANALOGUE AND IN DIGITAL HIGH SPEED DATA APPLICATIONS - PART 4: PRINTED BOARD CONNECTORS - SECTION 102: DETAIL SPECIFICATION FOR TWO-PART SINGLE-POLE CONNECTORS, FOR MULTIPLE USES ON PLUG-IN UNITS, WITH PRE-CENTERING, CODING AND EARLY MATING FEATURES, HAVING A METRIC GRID IN ACCORDANCE WITH IEC 60917
I.S. EN 60738-1-1:2008 THERMISTORS - DIRECTLY HEATED POSITIVE STEP-FUNCTION TEMPERATURE COEFFICIENT - PART 1-1: BLANK DETAIL SPECIFICATION - CURRENT LIMITING APPLICATION - ASSESSMENT LEVEL EZ
BS 5760-10.5:1993 Reliability of systems, equipment and components. Guide to reliability testing Compliance test plans for success ratio
NF EN 130100 : 2014 SECTIONAL SPECIFICATION: FIXED POLYETHYLENE-TEREPHTALAE FILM DIELECTRIC METAL FOIL CAPACITORS FOR DIRECT CURRENT
12/30268616 DC BS EN 61747-1-1. Liquid crystal display devices. Generic. Generic specification
NF EN 61051-1 : 2013 VARISTORS FOR USE IN ELECTRONIC EQUIPMENT - PART 1: GENERIC SPECIFICATION
BS EN 60384-4-2:2007 Fixed capacitors for use in electronic equipment Blank detail specification. Fixed aluminium electrolytic capacitors with solid (MnO2) electrolyte. Assessment level EZ
CEI EN 62319-1-1 : 2005 POLYMERIC THERMISTORS - DIRECTLY HEATED POSITIVE STEP FUNCTION TEMPERATURE COEFFICIENT - PART 1-1: BLANK DETAIL SPECIFICATION - CURRENT LIMITING APPLICATION
12/30244653 DC : 0 BS EN 62679-1 - ELECTRONIC PAPER DISPLAY - PART 1:TERMINOLOGY AND GENERIC SPECIFICATION
I.S. EN 143000:1994 THERMISTORS (GENERIC SPECIFICATION)
BS IEC 60747-14.1 : 2010 SEMICONDUCTOR DEVICES - PART 14-1: SEMICONDUCTOR SENSORS - GENERIC SPECIFICATION FOR SENSORS
BS EN 175201-804:2000 Harmonized system of quality assessment for electronic components Detail specification. Circular connectors. Round contacts, size diameter 1,6 mm, threaded coupling
BS EN 61274-1:2012 Fibre optic interconnecting devices and passive components. Adaptors for fibre optic connectors Generic specification
BS EN 62391-2-1:2006 Fixed electric double-layer capacitors for use in electronic equipment Blank detail specification. Electric double-layer capacitors for power application. Assessment level EZ
BS EN 140210:1995 Harmonized system of quality assessment for electronic components. Sectional specification: fixed power resistors. Capability approval
10/30237989 DC : DRAFT NOV 2010 BS IEC 60393-5 - POTENTIOMETERS FOR USE IN ELECTRONIC EQUIPMENT - PART 5: SECTIONAL SPECIFICATION - SINGLE-TURN ROTARY LOW-POWER WIRE WOUND AND NON-WIRE WOUND POTENTIOMETERS
14/30280850 DC : 0 BS EN 60384-1 - FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 1: GENERIC SPECIFICATION
DIN EN 168201:1992-09 BLANK DETAIL SPECIFICATION - QUARTZ CRYSTAL UNITS (QUALIFICATION APPROVAL)
PD IEC/PAS 62816-1:2013 External electrode fluorescent lamps Safety specifications
BS EN 60758:2016 Synthetic quartz crystal. Specifications and guidelines for use
08/30186808 DC : DRAFT JULY 2008 BS EN 140401 - BLANK DETAIL SPECIFICATION - FIXED LOW POWER NON-WIRE-WOUND SURFACE MOUNT (SMD) RESISTORS
BS DD57(1978) : 1978 METHODS OF EQUIPMENT RELIABILITY TESTING
DD CLC/TS 50466:2006 Long duration storage of electronic components. Specification for implementation
BS EN 61048 : 2006 AUXILIARIES FOR LAMPS - CAPACITORS FOR USE IN TUBULAR FLUORESCENT AND OTHER DISCHARGE LAMP CIRCUITS - GENERAL AND SAFETY REQUIREMENTS
03/108069 DC : DRAFT MAY 2003 IEC 62276 ED.1 - SINGLE CRYSTAL WAFERS APPLIED FOR SURFACE ACOUSTIC WAVE DEVICE - SPECIFICATION AND MEASURING METHOD
CEI EN 61076-3-101 : 1998 CONNECTORS WITH ASSESSED QUALITY, FOR USE IN D/C/ LOW-FREQUENCY ANALOGUE AND IN DIGITAL HIGH-SPEED DATA APPLICATIONS - PART 3: RECTANGULAR CONNECTORS - SECTION 101: DETAIL SPECIFICATION FOR A RANGE OF SHIELDED CONNECTORS WITH TRAPEZOIDAL SHAPED SHELLS AND NON-REMOVABLE RECTANGULAR CONTACTS ON A 1,27 MM X 2,54 MM CENTRE-LINE
BS EN 140401-802 : 2007 DETAIL SPECIFICATION: FIXED LOW POWER FILM SMD RESISTORS - RECTANGULAR - STABILITY CLASSES 1; 2
BS EN 50547:2013 Railway applications. Batteries for auxiliary power supply systems
DD IEC PAS 62074-1 : DRAFT NOV 2007 FIBRE OPTIC WDM DEVICES - PART 1: GENERIC SPECIFICATION
02/205635 DC : 0 IEC 60384-23. ED.1.0 - FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 23: SECTIONAL SPECIFICATION - FIXED METALLIZED POLYETHYLENE NAPHTHALATE FILM DIELECTRIC CHIP D.C. CAPACITORS
BS QC 480000(1995) : 1995 CONNECTORS WITH ASSESSED QUALITY, FOR USE IN D.C. LOW FREQUENCY ANALOGUE AND IN DIGITAL HIGH SPEED DATA APPLICATIONS - PART 1: GENERIC SPECIFICATION
BS EN 61248-5:1997 Transformers and inductors for use in electronic and telecommunication equipment Sectional specification for pulse transformers on the basis of the capability approval procedure
IEC PAS 62276:2001 Single crystal wafers applied for surface acoustic wave device - Specification and measuring method
BS EN 131700:1998 Harmonized system of quality assessment for electronic components. Sectional specification: Fixed capacitors for direct current with electrodes of thin metal foils and a polycarbonate film dielectric
BS EN 60947-8:2003 Low-voltage switchgear and controlgear Control units for built-in thermal protection (PTC) for rotating electrical machines
BS EN 62197-1:2006 Connectors for electronic equipment. Quality assessment requirements Generic specification
BS EN 50237:2000 Gloves and mitts with mechanical protection for electrical purposes
I.S. EN 61243-2:1999 LIVE WORKING - VOLTAGE DETECTORS - PART 2: RESISTIVE TYPE TO BE USED FOR VOLTAGES OF 1 KV TO 36 KV A.C.
BS CECC23000(1989) : 1989 AMD 7145 HARMONIZED SYSTEM OF QUALITY ASSESSMENT FOR ELECTRONIC COMPONENTS: GENERAL SPECIFICATION: PRINTED BOARDS
UNE-EN 61853-1:2011 Photovoltaic (PV) module performance testing and energy rating -- Part 1: Irradiance and temperature performance measurements and power rating
CEI EN 60966-2-1 : 2010 RADIO FREQUENCY AND COAXIAL CABLE ASSEMBLIES - PART 2-1: SECTIONAL SPECIFICATION FOR FLEXIBLE COAXIAL CABLE ASSEMBLIES
07/30152678 DC : 0 BS EN 60966-2-6 - RADIO FREQUENCY AND COAXIAL CABLE ASSEMBLIES - PART 2-6: DETAIL SPECIFICATION FOR CABLE ASSEMBLIES FOR RADIO AND TV RECEIVERS - FREQUENCY RANGE 0 TO 3000 MHZ, IEC 61169-24 CONNECTORS
CEI EN 61051-1 : 2010 VARISTORS FOR USE IN ELECTRONIC EQUIPMENT - PART 1: GENERIC SPECIFICATION
I.S. EN 60947-4-3:2014 LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 4-3: CONTACTORS AND MOTOR-STARTERS - AC SEMICONDUCTOR CONTROLLERS AND CONTACTORS FOR NON-MOTOR LOADS
98/230449 DC : DRAFT FEB 1998 PREN 133200 - SECTIONAL SPECIFICATION - PASSIVE FILTER UNITS FOR ELECTROMAGNETIC INTERFERENCE SUPPRESSION (FILTERS FOR WHICH SAFETY TESTS ARE REQUIRED)
CEI EN 60192 : 2002 LOW PRESSURE SODIUM VAPOUR LAMPS PERFORMANCE REQUIREMENTS
BS EN 61988-5:2009 Plasma display panels Generic specification
BS IEC 62341-1-1 : 2009 ORGANIC LIGHT EMITTING DIODE (OLED) DISPLAYS - PART 1-1: GENERIC SPECIFICATIONS
BS EN 133000:1997 Harmonized system of quality assessment for electronic components. Generic specification: passive filter units for electromagnetic interference suppression
12/30273415 DC : 0 BS EN 60968 - SELF-BALLASTED FLUORESCENT LAMPS FOR GENERAL LIGHTING SERVICES - SAFETY REQUIREMENTS
UNE-EN 60065:2015 Audio, video and similar electronic apparatus - Safety requirements
CEI EN 60384-8-1 : 2005 FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 8-1: BLANK DETAIL SPECIFICATION: FIXED CAPACITORS OF CERAMIC DIELECTRIC, CLASS 1 - ASSESSMENT LEVEL EZ
CEI EN 60384-3-1 : 2007 FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 3-1: BLANK DETAIL SPECIFICATION: SURFACE MOUNT FIXED TANTALUM ELECTROLYTIC CAPACITORS WITH MANGANESE DIOXIDE SOLID ELECTROLYTE - ASSESSMENT LEVEL EZ
IEC 61951-2:2017 Secondary cells and batteries containing alkaline or other non acid electrolytes - Secondary sealed cells and batteries for portable applications - Part 2: Nickel-metal hydride
BS EN 62047-4:2010 Semiconductor devices. Micro-electromechanical devices Generic specification for MEMS
BS EN 60384-13:2012 Fixed capacitors for use in electronic equipment Sectional specification/ Fixed polypropylene film dielectric metal foil d.c. capacitors
06/30149145 DC : DRAFT OCT 2006 IEC 60384-1 - FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 1: GENERIC SPECIFICATION
BS 7740(1994) : 1994 AMD 9060 PORTABLE EQUIPMENT FOR EARTHING OR EARTHING AND SHORT-CIRCUITING
BS EN 61248-3:1997 Transformers and inductors for use in electronic and telecommunication equipment Sectional specification for power transformers on the basis of the capability approval procedure
BS EN 134000:1995 Harmonized system of quality assessment for electronic components. Generic specification: variable capacitors. (Qualification approval and capability approval)
02/208646 DC : DRAFT AUG 2002 IEC 60966-3-1 ED.2 - RADIO FREQUENCY AND COAXIAL CABLE ASSEMBLIES - PART 3-1: BLANK DETAIL SPECIFICATION FOR SEMI-FLEXIBLE COAXIAL CABLE ASSEMBLIES
BS CECC25401(1984) : 1984 AMD 7580 SPECIFICATION FOR HARMONIZED SYSTEM OF QUALITY ASSESSMENT FOR ELECTRONIC COMPONENTS. BLANK DETAIL SPECIFICATION. ADJUSTERS USED WITH MAGNETIC OXIDE CORES FOR USE IN INDUCTORS & TUNED TRANSFORMER
99/243598 DC : DRAFT AUG 1999 PREN 50312-2 - PHOTOVOLTAIC SYSTEMS - SOLAR HOME SYSTEMS - PART 2: PERFORMANCE - TEST REQUIREMENTS AND PROCEDURES
CEI EN 50547 : 2014 RAILWAY APPLICATIONS - BATTERIES FOR AUXILIARY POWER SUPPLY SYSTEMS
02/208665 DC : DRAFT SEP 2002 IEC 62319-1 ED.1.0 - POLYMERIC THERMISTORS - DIRECTLY HEATED POSITIVE STEP FUNCTION TEMPERATURE COEFFICIENT - PART 1: GENERIC SPECIFICATION
I.S. EN 60384-16:2005 FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 16: SECTIONAL SPECIFICATION: FIXED METALLIZED POLYPROPYLENE FILM DIELECTRIC D.C. CAPACITORS
BS EN 61440:1998 Secondary cells and batteries containing alkaline or other non-acid electrolytes. Sealed nickel-cadmium small prismatic rechargeable single cells
BS EN 62093:2005 Balance-of-system components for photovoltaic systems. Design qualification natural environments
BS EN 130000:1994 Harmonized system of quality assessment for electronic components. Generic specification: fixed capacitors
NF EN 61204-6 : 2001 LOW-VOLTAGE POWER SUPPLIES, DC OUTPUT - PART 6: REQUIREMENTS FOR LOW-VOLTAGE POWER SUPPLIES ASSESSED PERFORMANCE
08/30176165 DC : DRAFT JAN 2008 BS EN 60966-2-1 - RADIO FREQUENCY AND COAXIAL CABLE ASSEMBLIES - PART 2-1: SECTIONAL SPECIFICATION FOR FLEXIBLE COAXIAL CABLE ASSEMBLIES
08/30176193 DC : DRAFT JAN 2008 BS EN 60966-3 - RADIO FREQUENCY AND COAXIAL CABLE ASSEMBLIES - PART 3: SECTIONAL SPECIFICATION FOR SEMI FLEXIBLE COAXIAL CABLE ASSEMBLIES
NF EN 61076 2 102 : 2002 CONNECTORS FOR ELECTRONIC EQUIPMENT - PART 2-102: CIRCULAR CONNECTORS WITH ASSESSED QUALITY - DETAIL SPECIFICATION FOR PLUGS AND JACKS FOR EXTERNAL LOW VOLTAGE POWER SUPPLY
15/30328414 DC : DRAFT JULY 2015 BS EN 62052-21/AMD1 - ELECTRICITY METERING EQUIPMENT (AC) - GENERAL REQUIREMENTS, TESTS AND TEST CONDITIONS - PART 21: TARIFF AND LOAD CONTROL EQUIPMENT
BS EN 60122-1 : 2002 QUARTZ CRYSTAL UNITS OF ASSESSED QUALITY - PART 1: GENERIC SPECIFICATION
04/30111593 DC : DRAFT MAR 2004 IEC 60384-2 ED.3 - FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 2: SECTIONAL SPECIFICATIONS - FIXED METALLIZED POLYETHYLENE-TEREPHTHALATE FILM DIELECTRIC D.C. CAPACITORS
BS CECC 16100:1980 Harmonized system of quality assessment for electronic components. Sectional specification: electromechanical all-or-nothing relays
BS EN 180000:1996 Harmonized system of quality assessment for electronic components. Generic specification: Fibre optic attenuators
BS QC 400203:1993 Specification for fixed resistors for use in electronic equipment. Blank detail specification. Fixed power resistors, heat-sink types. Assessment level H
08/30193881 DC : 0 BS EN 60939-1 ED.3 - PASSIVE FILTER UNITS FOR ELECTROMAGNETIC INTERFERENCE SUPPRESSION - PART 1: GENERIC SPECIFICATION
NF EN 61076 4 105 : 1999 CONNECTORS WITH ASSESSED QUALITY, FOR USE IN D.C., LOW FREQUENCY ANALOGUE AND IN DIGITAL HIGH-SPEED DATA APPLICATIONS - PART 4: PRINTED BOARD CONNECTORS - SECTION 105: DETAIL SPECIFICATION FOR 9 MM CIRCULAR CONNECTOR WITH 3 TO 8 CONTACTS FOR USE IN A WIDE RANGE OF APPLICATIONS INCLUDING THE TELECOMMUNICATION AND AUDIO INDUSTRY
IEC 62077:2015 Fibre optic interconnecting devices and passive components - Fibre optic circulators - Generic specification
08/30191292 DC : DRAFT OCT 2008 BS EN 62077 - FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - FIBRE OPTIC CIRCULATORS - GENERIC SPECIFICATION
06/30160408 DC : 0 BS EN 60966-2-4 - RADIO FREQUENCY AND COAXIAL CABLE ASSEMBLIES - PART 2-4: DETAIL SPECIFICATION FOR CABLE ASSEMBLIES FOR RADIO AND TV RECEIVERS - FREQUENCY RANGE 0 TO 3000 MHZ, IEC 61169-2 CONNECTORS
BS EN 61076-4-108:2002 Connectors for electronic equipment. Printed board connectors with assessed quality Detail specification for cable-to-board connectors, with a modular pitch of 25 mm and integrated shielding function, applicable for transverse packing density of 15 mm, having a basic grid of 2,5 mm in accordance with IEC 60917-1
BS EN 137100:1996 Harmonized system of quality assessment for electronic components. Sectional specification. Fixed aluminium electrolytic a.c. capacitors with non-solid electrolyte for motor starter applications. Qualification approval
DIN VDE 0660-102 : 1992 LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 4-1: ELECTROMECHANICAL CONTACTORS AND MOTOR-STARTERS
08/30174656 DC : DRAFT SEP 2008 BS EN 61202-1 - FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - FIBRE OPTIC ISOLATORS - PART 1: GENERIC SPECIFICATION
NF EN 60984 : 93 AMD 1 2003 SLEEVES OF INSULATING MATERIAL FOR LIVE WORKING
CSA E926 : 1998 : INC : UPD 1 : 1998 : R2012 AUXILIARIES FOR LAMPS - STARTING DEVICES (OTHER THAN GLOW STARTERS) - GENERAL AND SAFETY REQUIREMENTS
BS EN 61248-2:1997 Transformers and inductors for use in electronic and telecommunication equipment Sectional specification for signal transformers on the basis of the capability approval procedure
BS EN 130100:1998 Harmonized system of quality assessment for electronic components. Sectional specification: fixed polyethylene-terephthalate film dielectric metal foil capacitors for direct current
IEC TR 62059-21:2002 Electricity metering equipment - Dependability - Part 21: Collection of meter dependability data from the field
BS QC 001002:1991 Rules of procedure of the IEC quality assessment system for electronic components (IECQ)
I.S. EN 61047:2004 DC OR AC SUPPLIED ELECTRONIC STEP-DOWN CONVERTORS FOR FILAMENT LAMPS - PERFORMANCE REQUIREMENTS
I.S. EN 60539-2:2004 DIRECTLY HEATED NEGATIVE TEMPERATURE COEFFICIENT THERMISTORS - PART 2: SECTIONAL SPECIFICATION - SURFACE MOUNT NEGATIVE TEMPERATURE COEFFICIENT THERMISTORS
I.S. EN 60968:2015 SELF-BALLASTED FLUORESCENT LAMPS FOR GENERAL LIGHTING SERVICES - SAFETY REQUIREMENTS
NF EN 60432-2 : 2001 AMD 2 2013 INCANDESCENT LAMPS - SAFETY SPECIFICATIONS - PART 2: TUNGSTEN HALOGEN LAMPS FOR DOMESTIC AND SIMILAR GENERAL LIGHTING PURPOSES
DIN 45910-125:1992-04 HARMONIZED SYSTEM OF QUALITY ASSESSMENT FOR ELECTRONIC COMPONENTS; DETAIL SPECIFICATION: NON-POLAR ALUMINIUM ELECTROLYTIC CAPACITORS WITH NON-SOLID ELECTROLYTE DC 40 TO 100 V (SUITABLE TO VAC LOAD WITHOUT USING A POLARIZING POTENTIAL), GENERAL PURPOSE GRADE, CYLINDRICAL METAL CASE WITH INSULATION SLEEVE, AXIAL WIRE LEADS, CLIMATIC CATEGORY 40/085/056
DIN 45910-128 : 1992 HARMONIZED SYSTEM OF QUALITY ASSESSMENT FOR ELECTRONIC COMPONENTS; DETAIL SPECIFICATION; POLAR ALUMINIUM, ELECTROLYTIC CAPACITORS WITH NON-SOLID ELECTROLYTE 16 TO 350 V D.C. LONG-LIFE GRADE CYLINDRICAL METAL CASE, SOLDER TAGS OR SCREW TERMINALS
I.S. EN 140101:2008 BLANK DETAIL SPECIFICATION: FIXED LOW POWER FILM RESISTORS
CSA C22.2 NO. 60947-4-1:14 (R2019) Low-voltage switchgear and controlgear - Part 4-1: Contactors and motor-starters - Electromechanical contactors and motor-starters ( Bi-national standard, with UL 60947-4-1)
BIS IS 16077 : 2013 THIN-FILM TERRESTRIAL PHOTOVOLTAIC (PV) MODULES - DESIGN QUALIFICATION AND TYPE APPROVAL
IEC 61178-1:1993 Quartz crystal units - A specification in the IEC Quality Assessment System for Electronic Components (IECQ) - Part 1: Generic specification
UNE-EN 60947-4-3:2014 Low-voltage switchgear and controlgear - Part 4-3: Contactors and motor-starters - AC semiconductor controllers and contactors for non-motor loads
UNE-EN 60947-4-2:2013 Low-voltage switchgear and controlgear - Part 4-2: Contactors and motor-starters - AC semiconductor motor controllers and starters
CEI EN 62319-1 : 2005 POLYMERIC THERMISTORS - DIRECTLY HEATED POSITIVE STEP FUNCTION TEMPERATURE COEFFICIENT - PART 1: GENERIC SPECIFICATION
I.S. EN 60738-1:2006 THERMISTORS - DIRECTLY HEATED POSITIVE TEMPERATURE COEFFICIENT - PART 1: GENERIC SPECIFICATION
I.S. EN 62391-2-1:2006 FIXED ELECTRIC DOUBLE-LAYER CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 2-1: BLANK DETAIL SPECIFICATION - ELECTRIC-DOUBLE LAYER CAPACITORS FOR POWER APPLICATION - ASSESSMENT LEVEL EZ
CEI EN 61313-1 : 1998 FIBRE OPTIC PASSIVE COMPONENTS AND CABLE ASSEMBLIES - PART 1: CAPABILITY APPROVAL - GENERIC SPECIFICATION
CEI EN 60384-16 : 2006 FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 16: SECTIONAL SPECIFICATION: FIXED METALLIZED POLYPROPYLENE FILM DIELECTRIC D.C. CAPACITORS
BS EN 60384-22-1:2004 Fixed capacitors for use in electronic equipment Blank detail specification: Fixed surface mount multilayer capacitors of ceramic dielectric, Class 2. Assessment level EZ
BS EN 60384-9-1:2005 Fixed capacitors for use in electronic equipment Blank detail specification. Fixed capacitors of ceramic dielectric, Class 2. Assessment level EZ
I.S. EN 60393-5:2016 POTENTIOMETERS FOR USE IN ELECTRONIC EQUIPMENT - PART 5: SECTIONAL SPECIFICATION - SINGLE-TURN ROTARY LOW-POWER WIREWOUND AND NONWIREWOUND POTENTIOMETERS
I.S. EN 60065:2014 AUDIO, VIDEO AND SIMILAR ELECTRONIC APPARATUS - SAFETY REQUIREMENTS
BS EN 60432-2 : 2000 INCANDESCENT LAMPS - SAFETY SPECIFICATIONS - PART 2: TUNGSTEN HALOGEN LAMPS FOR DOMESTIC AND SIMILAR GENERAL LIGHTING PURPOSES
I.S. EN 60384-13-1:2006 FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 13-1: BLANK DETAIL SPECIFICATION - FIXED POLYPROPYLENE FILM DIELECTRIC METAL FOIL D.C. CAPACITORS - ASSESSMENT LEVELS E AND EZ
I.S. EN 60966-3-1:2009 RADIO FREQUENCY AND COAXIAL CABLE ASSEMBLIES - PART 3-1: BLANK DETAIL SPECIFICATION FOR SEMI-FLEXIBLE COAXIAL CABLE ASSEMBLIES
I.S. EN 60384-18-1:2007 FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 18-1: BLANK DETAIL SPECIFICATION - FIXED ALUMINIUM ELECTROLYTIC SURFACE MOUNT CAPACITORS WITH SOLID (MNO[2]) ELECTROLYTE - ASSESSMENT LEVEL EZ
I.S. EN 133200:1995 PASSIVE FILTER UNITS FOR ELECTROMAGNETIC INTERFERENCE SUPPRESSION (FILTERS FOR WHICH SAFETY TESTS ARE REQUIRED) (SECTIONAL SPECIFICATION)
I.S. EN 196110:2002 SECTIONAL SPECIFICATION: ROTARY SWITCHES - CAPABILITY APPROVAL
I.S. EN 60384-19-1:2006 FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 19-1: BLANK DETAIL SPECIFICATION - FIXED METALLIZED POLYETHYLENE-TEREPHTHALATE FILM DIELECTRIC SURFACE MOUNT D.C. CAPACITORS - ASSESSMENT LEVEL EZ
I.S. EN 60539-1:2016 DIRECTLY HEATED NEGATIVE TEMPERATURE COEFFICIENT THERMISTORS - PART 1: GENERIC SPECIFICATION
I.S. EN 62319-1:2005 POLYMERIC THERMISTORS - DIRECTLY HEATED POSITIVE STEP FUNCTION TEMPERATURE COEFFICIENT - PART 1: GENERIC SPECIFICATION
I.S. EN 62310-3:2008 STATIC TRANSFER SYSTEMS (STS) - PART 3: METHOD FOR SPECIFYING PERFORMANCE AND TEST REQUIREMENTS
OVE/ONORM EN 60384-11 : 2008 FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 11: SECTIONAL SPECIFICATION - FIXED POLYETHYLENE TEREPHTHALATE FILM DIELECTRIC METAL FOIL D.C. CAPACITORS
I.S. EN 134000:1994 GENERIC SPECIFICATION: VARIABLE CAPACITORS (QUALIFICATION APPROVAL AND CAPABILITY APPROVAL)
I.S. EN 62093:2005 BALANCE-OF-SYSTEM COMPONENTS FOR PHOTOVOLTAIC SYSTEMS - DESIGN QUALIFICATION NATURAL ENVIRONMENTS
I.S. EN 60947-7-2:2009 LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 7-2: ANCILLARY EQUIPMENT - PROTECTIVE CONDUCTOR TERMINAL BLOCKS FOR COPPER CONDUCTORS
I.S. EN 61076-4-110:2002 CONNECTORS FOR ELECTRONIC EQUIPMENT - PART 4-110: PRINTED BOARD CONNECTORS WITH ASSESSED QUALITY - DETAIL SPECIFICATION FOR LATCHED CABLE CONNECTOR SYSTEM HAVING A BASIC GRID OF 2,0 MM INCLUDING FULL SHIELDING AND LATCHING FUNCTION
IEC 60115-7:1984 Fixed resistors for use in electronic equipment. Part 7: Sectional specification: Fixed resistor networks in which not all resistors are individually measurable
I.S. EN 61347-2-1:2004 LAMP CONTROLGEAR - PART 2-1: PARTICULAR REQUIREMENTS FOR STARTING DEVICES (OTHER THAN GLOW STARTERS)
BS CECC 40103:1988 Specification for harmonized system of quality assessment for electronic components. Blank detail specification. Fixed low power non-wirewound resistors. Assessment level P
I.S. CECC 33000:1994 PASSIVE FILTER UNITS FOR ELECTROMAGNETIC INTERFERENCE SUPPRESSION (GENERIC SPECIFICATION)
CEI EN 60384-21-1 : 2005 FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 21-1: BLANK DETAIL SPECIFICATION: FIXED SURFACE MOUNT MULTILAYER CAPACITORS OF CERAMIC DIELECTRIC, CLASS 1 - ASSESSMENT LEVEL EZ
CEI EN 62246-1-1 : 2014 REED SWITCHES - PART 1-1: GENERIC SPECIFICATION - QUALITY ASSESSMENT
EN 140401-802:2007/A3:2017 DETAIL SPECIFICATION: FIXED LOW POWER FILM SMD RESISTORS - RECTANGULAR - STABILITY CLASSES 1; 2
CEI EN 62391-2 : 2006 FIXED ELECTRIC DOUBLE-LAYER CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 2: SECTIONAL SPECIFICATION - ELECTRIC DOUBLE-LAYER CAPACITORS FOR POWER APPLICATION
CEI EN 60874-1 : 2012 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - CONNECTORS FOR OPTICAL FIBRES AND CABLES - PART 1: GENERIC SPECIFICATION
CEI EN 61047 : 2005 DC OR AC SUPPLIED ELECTRONIC STEP-DOWN CONVERTORS FOR FILAMENT LAMPS - PERFORMANCE REQUIREMENTS
EN 60384-1:2016 Fixed capacitors for use in electronic equipment - Part 1: Generic specification
CEI EN 130900 : 1998 SECTIONAL SPECIFICATION - FIXED POLYSTYRENE FILM DIELECTRIC METAL FOIL D.C. CAPACITORS
IEC 61810-5:1998 Electromechanical non-specified time all-or-nothing relays - Part 5: Insulation coordination
CSA C22.2 No. 61730-2 : 2011 : INC : UPD 1 : 2013 PHOTOVOLTAIC (PV) MODULE SAFETY QUALIFICATION - PART 2: REQUIREMENTS FOR TESTING
I.S. EN 62341-1-1:2009 ORGANIC LIGHT EMITTING DIODE (OLED) DISPLAYS - PART 1-1: GENERIC SPECIFICATIONS
IEC 61076-5:2001 Connectors for use in d.c., low-frequency analogue and digital high-speed data applications - Part 5: In-line sockets with assessed quality - Sectional specification
I.S. EN 62391-2:2006 FIXED ELECTRIC DOUBLE-LAYER CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 2: SECTIONAL SPECIFICATION - ELECTRIC DOUBLE-LAYER CAPACITORS FOR POWER APPLICATION
I.S. EN 61020-1:2009 ELECTROMECHANICAL SWITCHES FOR USE IN ELECTRICAL AND ELECTRONIC EQUIPMENT - PART 1: GENERIC SPECIFICATION
IEC 62035:2014+AMD1:2016 CSV Discharge lamps (excluding fluorescent lamps) - Safety specifications
I.S. EN 140401-803:2007 DETAIL SPECIFICATION: FIXED LOW POWER FILM SMD RESISTORS - CYLINDRICAL - STABILITY CLASSES 0,05; 0,1; 0,25; 0,5; 1; 2
I.S. EN 60384-18-2:2007 FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 18-2: BLANK DETAIL SPECIFICATION - FIXED ALUMINIUM ELECTROLYTIC SURFACE MOUNT CAPACITORS WITH NON-SOLID ELECTROLYTE - ASSESSMENT LEVEL EZ
I.S. EN 111000:1994 GENERIC SPECIFICATION: CATHODE RAY TUBES
IEC 62134-1:2009 Fibre optic interconnecting devices and passive components - Fibre optic closures - Part 1: Generic specification
I.S. EN 61951-1:2017 SECONDARY CELLS AND BATTERIES CONTAINING ALKALINE OR OTHER NON-ACID ELECTROLYTES - SECONDARY SEALED CELLS AND BATTERIES FOR PORTABLE APPLICATIONS - PART 1: NICKEL-CADMIUM
I.S. EN 61169-1:2013 RADIO-FREQUENCY CONNECTORS - PART 1: GENERIC SPECIFICATION - GENERAL REQUIREMENTS AND MEASURING METHODS
IEC 60950-1:2005+AMD1:2009+AMD2:2013 CSV Information technology equipment - Safety - Part 1: General requirements
I.S. EN 60357:2003 TUNGSTEN HALOGEN LAMPS (NON-VEHICLE) - PERFORMANCE SPECIFICATIONS
IEC PAS 62816-2:2013 External electrode fluorescent lamps - Part 2: Performance specifications
IEC 61076-4-110:2001 Connectors for electronic equipment - Part 4-110: Printed board connectors with assessed quality - Detail specification for latched cable connector system having a basic grid of 2,0 mm including full shielding and latching function
I.S. EN 175500:1998 CABLE OUTLET ACCESSORIES FOR CONNECTORS, INCLUDING QUALIFICATION APPROVAL AND CAPABILITY APPROVAL (SECTIONAL SPECIFICATION)
IEC 61178-2-1:1993 Quartz crystal units - A specification in the IEC Quality Assessment System for Electronic Components (IECQ) - Part 2: Sectional specification - Capability approval - Section 1: Blank detail specification
IEC PAS 61076-3-111:2002 Connectors for electronic equipment - Part 3-111: Detail specification for 8-way, shielded and unshielded, free and fixed connectors, for industrial environments for frequencies up to 250 MHz
IEC PAS 62816-1:2013 External electrode fluorescent lamps - Part 1: Safety specifications
EN 60384-13-1:2006/corrigendum:2009 FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 13-1: BLANK DETAIL SPECIFICATION - FIXED POLYPROPYLENE FILM DIELECTRIC METAL FOIL D.C. CAPACITORS - ASSESSMENT LEVEL E AND EZ
EN 61169-1:2013/AC:2016-02 RADIO-FREQUENCY CONNECTORS - PART 1: GENERIC SPECIFICATION - GENERAL REQUIREMENTS AND MEASURING METHODS (IEC 61169-1:2013)
EN 60938-1:1999/A1:2007 FIXED INDUCTORS FOR ELECTROMAGNETIC INTERFERENCE SUPPRESSION - PART 1: GENERIC SPECIFICATION
EN 60539-1:2016/AC:2017-09 DIRECTLY HEATED NEGATIVE TEMPERATURE COEFFICIENT THERMISTORS - PART 1: GENERIC SPECIFICATION (IEC 60539-1:2016/COR1:2017)
EN 60384-4-2:2007/corrigendum:2009 FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 4-2: BLANK DETAIL SPECIFICATION - FIXED ALUMINIUM ELECTROLYTIC CAPACITORS WITH SOLID (MNO[2]) ELECTROLYTE - ASSESSMENT LEVEL EZ
EN 60115-1:2011/A11:2015 FIXED RESISTORS FOR USE IN ELECTRONIC EQUIPMENT - PART 1: GENERIC SPECIFICATION
EN 60384-4-1:2007/corrigendum:2009 FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 4-1: BLANK DETAIL SPECIFICATION - FIXED ALUMINIUM ELECTROLYTIC CAPACITORS WITH NON-SOLID ELECTROLYTE - ASSESSMENT LEVEL EZ
IEC 61076-4-101:2001 Connectors for electronic equipment - Part 4-101: Printed board connectors with assessed quality - Detail specification for two-part connector modules, having a basic grid of 2,0 mm for printed boards and backplanes in accordance with IEC 60917
16/30350012 DC : 0 BS EN 60810 - LAMPS, LIGHT SOURCES AND LED PACKAGES FOR ROAD VEHICLES - PERFORMANCE REQUIREMENTS
IEC 61298-1:2008 Process measurement and control devices - General methods and procedures for evaluating performance - Part 1: General considerations
IEC 60738-1:2006+AMD1:2009 CSV Thermistors - Directly heated positive temperature coefficient -Part 1: Generic specification
IEC 60938-1:1999+AMD1:2006 CSV Fixed inductors for electromagnetic interference suppression - Part 1: Generic specification
IEC 61076-3-101:1997 Connectors with assessed quality, for use in d.c., low-frequency analogue and in digital high-speed data applications - Part 3: Rectangular connectors - Section 101: Detail specification for a range of shielded connectors with trapezoidal shaped shells and non-removable rectangular contacts on a 1,27 mm x 2,54 mm centre-line
IEC 62595-1-1:2013 LCD backlight unit - Part 1-1: Generic specification
IEC 62811:2015 AC and/or DC-supplied electronic controlgear for discharge lamps (excluding fluorescent lamps) - Performance requirements for low frequency square wave operation
IEC 61248-6:1996 Transformers and inductors for use in electronic andtelecommunication equipment - Part 6: Sectional specification forinductors on the basis of the capability approval procedure
BS EN 60947-2:2017+A1:2020 Low-voltage switchgear and controlgear Circuit-breakers
IEC 62310-3:2008 Static transfer systems (STS) - Part 3: Method for specifying performance and test requirements
IEC 62197-1:2006 Connectors for electronic equipment - Quality assessment requirements - Part 1: Generic specification
IEC 60876-1:2014 Fibre optic interconnecting devices and passive components - Fibre optic spatial switches - Part 1: Generic specification
IEC 61199:2011+AMD1:2012+AMD2:2014 CSV Single-capped fluorescent lamps - Safety specifications
IEC 61076-4-100:2001 Connectors for electronic equipment - Part 4-100: Printed board connectors with assessed quality - Detail specification for two-part connector modules having a grid of 2,5 mm for printed boards and backplanes
IEC 60432-1:1999+AMD1:2005+AMD2:2011 CSV Incandescent lamps - Safety specifications - Part 1: Tungsten filament lamps for domestic and similar general lighting purposes
IEC 60384-26-1:2010 Fixed capacitors for use in electronic equipment - Part 26-1: Blank detail specification - Fixed aluminium electrolytic capacitors with conductive polymer solid electrolyte - Assessment level EZ
IEC 61195:1999+AMD1:2012+AMD2:2014 CSV Double-capped fluorescent lamps - Safety specifications
IEC 60384-2:2011 Fixed capacitors for use in electronic equipment - Part 2: Sectional specification - Fixed metallized polyethylene terephthalate film dielectric d.c. capacitors
IEC 60939-2-1:2004 Complete filter units for radio interference suppression - Part 2-1: Blank detail specification - Passive filter units for electromagnetic interference suppression - Filters for which safety tests are required (assessment level D/DZ)
IEC 60947-8:2003+AMD1:2006+AMD2:2011 CSV Low-voltage switchgear and controlgear - Part 8: Control units for built-in thermal protection (PTC) for rotating electrical machines
IEC 61215:2005 Crystalline silicon terrestrial photovoltaic (PV) modules - Design qualification and type approval
IEC 60384-1:2016 Fixed capacitors for use in electronic equipment - Part 1: Generic specification
IEC 60929:2011+AMD1:2015 CSV AC and/or DC-supplied electronic control gear for tubularfluorescent lamps - Performance requirements
IEC 60874-1:2011 Fibre optic interconnecting devices and passive components - Connectors for optical fibres and cables - Part 1: Generic specification
IEC 61314-1:2011 Fibre optic interconnecting devices and passive components - Fibre optic fan-outs - Part 1: Generic specification
IEC 60947-4-2:2011 Low-voltage switchgear and controlgear - Part 4-2: Contactors and motor-starters - AC semiconductor motor controllers and starters
IEC 60384-16:2005 Fixed capacitors for use in electronic equipment - Part 16: Sectional specification: Fixed metallized polypropylene film dielectric d.c. capacitors
00/243910 DC : DRAFT AUG 2000 IEC 61730-2 - PHOTOVOLTAIC MODULE SAFETY QUALIFICATION - PART 2: REQUIREMENTS FOR TESTING
BS EN 61215:2005 Crystalline silicon terrestrial photovoltaic (PV) modules. Design qualification and type approval
IEC 61020-1:2009 Electromechanical switches for use in electrical and electronic equipment - Part 1: Generic specification
IEC 61076-3-100:1999 Connectors for use in d.c., low-frequency analogue and digital high speed data applications - Part 3-100: Rectangular connectors with assessed quality - Detail specification for a range of shielded connectors with trapezoidal-shaped shells and non-removable ribbon contacts on a 1,27 mm double row
IEC 60384-4-1:2007 Fixed capacitors for use in electronic equipment - Part 4-1: Blank detail specification - Fixed aluminium electrolytic capacitors with non-solid electrolyte - Assessment level EZ
IEC 61347-2-1:2000+AMD1:2005+AMD2:2013 CSV Lamp controlgear - Part 2-1: Particular requirements for startingdevices (other than glow starters)
IEC 60939-1:2010 Passive filter units for electromagnetic interference suppression - Part 1: Generic specification
IEC 61076-4-108:2002 Connectors for electronic equipment - Part 4-108: Printed board connectors with assessed quality - Detail specification for cable-to-board connectors, with a modular pitch of 25 mm and integrated shielding function, applicable for transverse packing density of 15 mm, having a basic grid of 2,5 mm in accordance with IEC 60917-1
IEC 61076-4-102:1997 Connectors with assessed quality for use in d.c., low-frequencyanalogue and in digital high speed data applications - Part 4:Printed board connectors - Section 102: Detail specification fortwo-part single-pole connectors, for multiple uses on plug-inunits, with pre-centring, coding and early mating features, havinga metric grid in accordance with IEC 60917
IEC 61747-1:1998+AMD1:2003 CSV Liquid crystal and solid-state display devices - Part 1: Generic specification
IEC 62341-1-1:2009 Organic light emitting diode (OLED) displays - Part 1-1: Generic specifications
IEC 60875-1:2015 Fibre optic interconnecting devices and passive components - Non-wavelength-selective fibre optic branching devices - Part 1: Generic specification
IEC 60384-19-1:2006 Fixed capacitors for use in electronic equipment - Part 19-1: Blank detail specification - Fixed metallized polyethylene-terephthalate film dielectric surface mount d.c. capacitors - Assessment level EZ
IEC 60738-1-4:2008 Thermistors - Directly heated positive step-function temperature coefficient - Part 1-4: Blank detail specification - Sensing application - Assessment level EZ
IEC 60393-5:2015 Potentiometers for use in electronic equipment - Part 5: Sectional specification - Single-turn rotary low-power wirewound and non-wirewound potentiometers
IEC 60127-5:2016 Miniature fuses - Part 5: Guidelines for quality assessment of miniature fuse-links
IEC 61274-1:2011 Fibre optic interconnecting devices and passive components - Adaptors for fibre optic connectors - Part 1: Generic specification
IEC 61248-1:1996 Transformers and inductors for use in electronic and telecommunication equipment - Part 1: Generic specification
IEC 60738-1-1:2008 Thermistors - Directly heated positive step-function temperature coefficient - Part 1-1: Blank detail specification - Current limiting application - Assessment level EZ
IEC 62319-1-1:2005 Polymeric thermistors - Directly heated positive step function temperature coefficient - Part 1-1: Blank detail specification - Current limiting application
IEC 61646:2008 Thin-film terrestrial photovoltaic (PV) modules - Design qualification and type approval
IEC 60368-4-1:2000 Piezoelectric filters of assessed quality - Part 4-1: Blank detail specification - Capability approval
IEC 62435-2:2017 Electronic components - Long-term storage of electronic semiconductor devices - Part 2: Deterioration mechanisms
IEC 60921:2004+AMD1:2006 CSV Ballasts for tubular fluorescent lamps - Performance requirements
IEC 60873-2:2004 Electrical and pneumatic analogue chart recorders for use in industrial process control systems - Part 2: Guidance for inspection and routine testing
IEC 60603-13:1995 Connectors for frequencies below 3 MHz for use with printed boards - Part 13: Detail specification for two-part connectors of assessed quality, for printed boards for basic grid of 2,54 mm (0,1 in), with free connectors for non-accessible insulation displacement terminations (ID)
IEC 61248-5:1996 Transformers and inductors for use in electronic andtelecommunication equipment - Part 5: Sectional specification forpulse transformers on the basis of the capability approvalprocedure
IEC 61047:2004 DC or AC supplied electronic step-down convertors for filament lamps - Performance requirements
IEC 61313-1:1995 fibre optic passive components and cable assemblies - Part 1: Capability approval - Generic specification
IEC 62496-1:2008 Optical circuit boards - Part 1: General
IEC 60384-18-2:2007 Fixed capacitors for use in electronic equipment - Part 18-2: Blank detail specification - Fixed aluminium electrolytic surface mount capacitors with non-solid electrolyte - Assessment level EZ
IEC 62099:2001 Fibre optic wavelength switches - Generic specification
UNE-EN 60929:2011 AC and/or DC-supplied electronic control gear for tubular fluorescent lamps - Performance requirements
IEC 60923:2005+AMD1:2006 CSV Auxiliaries for lamps - Ballasts for discharge lamps (excluding tubular fluorescent lamps) - Performance requirements
IEC 60384-11:2008 Fixed capacitors for use in electronic equipment - Part 11: Sectional specification - Fixed polyethylene-terephthalate film dielectric metal foil d.c. capacitors
IEC 61358:1996 Acceptance inspection for direct connected alternating current static watt-hour meters for active energy (Classes 1 and 2)
IEC 60285:1993+AMD1:1995+AMD2:1998 CSV Alkaline secondary cells and batteries - Sealed nickel-cadmium cylindrical rechargeable single cells
IEC 61248-3:1996 Transformers and inductors for use in electronic andtelecommunication equipment - Part 3: Sectional specification forpower transformers on the basis of the capability approvalprocedure
BS EN 60810:2015 Lamps for road vehicles. Performance requirements
IEC 61811-10:2002 Electromechanical elementary relays of assessed quality - Part 10: Sectional specification - Relays for industrial application
IEC 60384-8-1:2005 Fixed capacitors for use in electronic equipment - Part 8-1: Blank detail specification: Fixed capacitors of ceramic dielectric, Class 1 - Assessment level EZ
IEC 61811-50:2002 Electromechanical all-or-nothing relays - Part 50: Sectional specification - Electromechanical all-or-nothing telecom relays of assessed quality
BS EN 60950-1 : 2006 INFORMATION TECHNOLOGY EQUIPMENT - SAFETY - PART 1: GENERAL REQUIREMENTS
IEC 61248-4:1996 Transformers and inductors for use in electronic andtelecommunication equipment - Part 4: Sectional specification forpower transformers for switched mode power supplies (SMPS) on thebasis of the capability approval procedure
IEC 60966-3-1:2009 Radio frequency and coaxial cable assemblies - Part 3-1: Blank detail specification for semi-flexible coaxial cable assemblies
BS EN ISO 17526:2003 Optics and optical instruments. Lasers and laser-related equipment. Lifetime of lasers
IEC 60770-2:2010 Transmitters for use in industrial-process control systems - Part 2: Methods for inspection and routine testing
IEC 60966-3:2008 Radio frequency and coaxial cable assemblies - Part 3: Sectional specification for semi-flexible coaxial cable assemblies
IEC 60393-2:2015 Potentiometers for use in electronic equipment - Part 2: Sectional specification - Lead-screw actuated and rotary preset potentiometers
IEC 61248-2:1996 Transformers and inductors for use in electronic andtelecommunication equipment - Part 2: Sectional specification forsignal transformers on the basis of the capability approvalprocedure
IEC 62384:2006+AMD1:2009 CSV DC or AC supplied electronic control gear for LED modules - Performance requirements
IEC 62047-4:2008 Semiconductor devices - Micro-electromechanical devices - Part 4: Generic specification for MEMS
16/30242287 DC : 0 BS EN 62688 - CONCENTRATOR PHOTOVOLTAIC (CPV) MODULE AND ASSEMBLY SAFETY QUALIFICATION
IEC 62093:2005 Balance-of-system components for photovoltaic systems - Design qualification natural environments
IEC 60384-18-1:2007 Fixed capacitors for use in electronic equipment - Part 18-1: Blank detail specification - Fixed aluminium electrolytic surface mount capacitors with solid (MnO<sub>2</sub>) electrolyte - Assessment level EZ
IEC 60384-4-2:2007 Fixed capacitors for use in electronic equipment - Part 4-2: Blank detail specification - Fixed aluminium electrolytic capacitors with solid (MnO<sub>2</sub>) electrolyte - Assessment level EZ
IEC 60738-1-2:2008 Thermistors - Directly heated positive step-function temperature coefficient - Part 1-2: Blank detail specification - Heating element application - Assessment level EZ
IEC 61193-2:2007 Quality assessment systems - Part 2: Selection and use of sampling plans for inspection of electronic components and packages
IEC 62675:2014 Secondary cells and batteries containing alkaline or other non-acid electrolytes - Sealed nickel-metal hydride prismatic rechargeable single cells
IEC 61076-7:2000 Connectors for use in d.c., low-frequency analogue and digital high speed data applications - Part 7: Cable outlet accessories with assessed quality, including qualification and capability approval - Sectional specifiation
IEC 61076-2-102:2002 Connectors for electronic equipment - Part 2-102: Circular connectors with assessed quality - Detail specification for plugs and jacks for external low voltage power supply
IEC 60384-13:2011 Fixed capacitors for use in electronic equipment - Part 13: Sectional specification - Fixed polypropylene film dielectric metal foil d.c. capacitors
EN 61811-1:2015 Electromechanical telecom elementary relays of assessed quality - Part 1: Generic specification and blank detail specification
EN 175201-804:1999 Detail Specification: Circular connectors - Round contacts, size diameter 1,6 mm, threaded coupling
EN 61951-2:2017 Secondary cells and batteries containing alkaline or other non acid electrolytes - Secondary sealed cells and batteries for portable applications - Part 2: Nickel-metal hydride
EN 175301-803:2006 Detail Specification: Rectangular connectors - Flat contacts, 0,8 mm thickness, locking screw not detachable
EN 62047-4:2010 Semiconductor devices - Micro-electromechanical devices - Part 4: Generic specification for MEMS
EN 136000:1992 Generic Specification: Magnetrons
EN 62595-1-1:2013 LCD backlight unit - Part 1-1: Generic specification
EN 61853-1:2011 Photovoltaic (PV) module performance testing and energy rating - Part 1: Irradiance and temperature performance measurements and power rating
EN 60923:2005/A1:2006 AUXILIARIES FOR LAMPS - BALLASTS FOR DISCHARGE LAMPS (EXCLUDING TUBULAR FLUORESCENT LAMPS) - PERFORMANCE REQUIREMENTS
EN 62310-3:2008 Static transfer systems (STS) - Part 3: Method for specifying performance and test requirements
EN 60966-3-1:2009 Radio frequency and coaxial cable assemblies - Part 3-1: Blank detail specification for semi-flexible coaxial cable assemblies
EN 180000 : 1995 GENERIC SPECIFICATION: FIBRE OPTIC ATTENUATORS
EN 160200-1 : 1997 MICROWAVE MODULAR ELECTRONIC UNITS OF ASSESSED QUALITY - PART 1: CAPABILITY APPROVAL PROCEDURE (SECTIONAL SPECIFICATION)
EN ISO 17526:2003 Optics and optical instruments - Lasers and laser-related equipment - Lifetime of lasers (ISO 17526:2003)
BIS IS 16048-1 : 2013 SECONDARY CELLS AND BATTERIES CONTAINING ALKALINE OR OTHER NON-ACID ELECTROLYTES - PORTABLE SEALED RECHARGEABLE SINGLE CELLS - PART 1: NICKEL-CADMIUM
GOST R IEC 60384-14-1 : 2004 FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 14-1 - BLANK DETAIL SPECIFICATION ON FIXED CAPACITORS FOR ELECTROMAGNETIC INTERFERENCE SUPPRESSION AND CONNECTION TO SUPPLY MAINS - ASSESSMENT LEVEL D
BS EN 62435-1:2017 Electronic components. Long-term storage of electronic semiconductor devices General
10/30237992 DC : DRAFT NOV 2010 BS IEC 60393-6 - POTENTIOMETERS FOR USE IN ELECTRONIC EQUIPMENT - PART 6: SECTIONAL SPECIFICATION - SURFACE MOUNT PRESET POTENTIOMETERS
09/30212954 DC : 0 BS EN 61951-1 ED 3 - SECONDARY CELLS AND BATTERIES CONTAINING ALKALINE OR OTHER NON-ACID ELECTROLYTES - PORTABLE SEALED RECHARGEABLE SINGLE CELLS - PART 1: NICKEL-CADMIUM
CEI EN 62595-1-1 : 2014 LCD BACKLIGHT UNIT - PART 1-1: GENERIC SPECIFICATION
08/30193715 DC : 0 BS EN 62246-1 ED.2 - REED SWITCHES - PART 1: GENERIC SPECIFICATION
BS EN 62134-1:2009 Fibre optic interconnecting devices and passive components. Fibre optic closures Generic specification
BIS IS/IEC 60947-3 : 1999 LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 3: SWITCHES, DISCONNECTORS, SWITCH-DISCONNECTORS AND FUSE COMBINATION UNITS
DD IEC/PAS 62435:2005 Electronic components. Long duration storage of electronic components. Guidance for implementation
BS CECC 43000(1982) : AMD 7315 HARMONIZED SYSTEM OF QUALITY ASSESSMENT FOR ELECTRONIC COMPONENTS: GENERIC SPECIFICATION: DIRECTLY HEATED NEGATIVE TEMPERATURE COEFFICIENT THERMISTORS
PD IEC/TS 62804-1:2015 Photovoltaic (PV) modules. Test methods for the detection of potential-induced degradation Crystalline silicon
BS CECC 31700:1986 Harmonized system of quality assessment for electronic components. Sectional specification: fixed capacitors for direct current with electrodes of thin metal foils and a polycarbonate film dielectric
BS EN 60738-1 : 2006 THERMISTORS - DIRECTLY HEATED POSITIVE TEMPERATURE COEFFICIENT - PART 1: GENERIC SPECIFICATION
BS CECC 16000-1:1992 Harmonized system of quality assessment for electronic components. Generic specification: electromechanical all-or-nothing relays General
DIN EN 61038 : 1994 AMD 2 1999 TIME SWITCHES FOR TARIFF AND LOAD CONTROL
11/30243576 DC : DRAFT FEB 2011 BS EN 62643-1 - ELECTROSTATIC MICRO ELECTRO MECHANICAL SYSTEMS (MEMS) OSCILLATORS OF ASSESSED QUALITY - PART 1: GENERIC SPECIFICATION
08/30176936 DC : DRAFT JAN 2008 BS EN 61003-2 - INDUSTRIAL-PROCESS CONTROL SYSTEMS - INSTRUMENTS WITH ANALOGUE INPUTS AND TWO OR MULTI-STATE OUTPUTS - PART 2: GUIDANCE FOR INSPECTION AND ROUTINE TESTING
I.S. EN 60758:2016 SYNTHETIC QUARTZ CRYSTAL - SPECIFICATIONS AND GUIDELINES FOR USE
BS EN 60947-6-2:2003 Low-voltage switchgear and controlgear Multiple function equipment. Control and protective switching devices (or equipment) (CPS)
BS EN 61076-5:2001 Connectors with assessed quality, for use in d.c., low-frequency analogue and in digital high speed data applications In-line sockets with assessed quality. Sectional specification
I.S. EN 61811-10:2003 ELECTROMECHANICAL ELEMENTARY RELAYS OF ASSESSED QUALITY - PART 10: SECTIONAL SPECIFICATION - RELAYS FOR INDUSTRIAL APPLICATION
BS EN 60947-4-2:2012 Low-voltage switchgear and controlgear Contactors and motor-starters. AC semiconductor motor controllers and starters
04/30116868 DC : DRAFT JUL 2004 EN 175301-803 - DETAIL SPECIFICATION - RECTANGULAR CONNECTORS - FLAT CONTACTS, 0,8 MM THICKNESS, LOCKING SCREW NOT DETACHABLE
BS EN 62319-1-1:2005 Polymeric thermistors. Directly heated positive step function temperature coefficient Blank detail specification. Current limiting application
UNE-EN 61199:2012 Single-capped fluorescent lamps - Safety specifications
09/30210295 DC : DRAFT SEP 2009 BS EN 60086-3 - PRIMARY BATTERIES - PART 3: WATCH BATTERIES
BS EN 60393-5:2016 Potentiometers for use in electronic equipment Sectional specification. Single-turn rotary low-power wirewound and non-wirewound potentiometers
I.S. EN 60384-26-1:2010 FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 26-1: BLANK DETAIL SPECIFICATION - FIXED ALUMINUM ELECTROLYTIC CAPACITORS WITH CONDUCTIVE POLYMER SOLID ELECTROLYTE - ASSESSMENT LEVEL EZ
BS EN 60393-2:2016 Potentiometers for use in electronic equipment Sectional specification. Lead-screw actuated and rotary preset potentiometers
BS EN 62310-3:2008 Static transfer systems (STS) Method for specifying performance and test requirements
99/201503 DC : 0 IEC 61479 ED.1 - LIVE WORKING - CONDUCTOR COVERS (LINE HOSES) OR INSULATING MATERIAL FOR ELECTRICAL PURPOSES
CEI EN 60873-2 : 2005 ELECTRICAL AND PNEUMATIC ANALOGUE CHART RECORDERS FOR USE IN INDUSTRIAL PROCESS CONTROL SYSTEMS - PART 2: GUIDANCE FOR INSPECTION AND ROUTINE TESTING
BS CECC 32100:1992 Harmonized system of quality assessment for electronic components. Sectional specification: fixed multilayer ceramic chip capacitors
CEI EN 62047-4 : 2011 SEMICONDUCTOR DEVICES - MICRO-ELECTROMECHANICAL DEVICES - PART 4: GENERIC SPECIFICATION FOR MEMS
DIN EN 61037 : 1994 AMD 2 1999 ELECTRONIC RIPPLE CONTROL RECEIVERS FOR TARIFF AND LOAD CONTROL
CEI EN 140401 : 2009 BLANK DETAIL SPECIFICATION: FIXED LOW POWER FILM SURFACE MOUNT (SMD) RESISTORS
CEI EN 60384-4-1 : 2009 FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 4-1: BLANK DETAIL SPECIFICATION - FIXED ALUMINIUM ELECTROLYTIC CAPACITORS WITH NON-SOLID ELECTROLYTE - ASSESSMENT LEVEL EZ
BS CECC 40201:1981 Specification for harmonized system of quality assessment for electronic components. Blank detail specification: fixed power resistors. Assessment level S
NF EN 50321 : 2000 ELECTRICALLY INSULATING FOOTWEAR FOR WORKING ON LOW VOLTAGE INSTALLATIONS
BS EN 125000:1998 Harmonized system of quality assessment for electronic components. Generic specification: cores made of ferrite materials
BS 7623:1993 Electrical and pneumatic analogue chart recorders for use in industrial-process control systems. Guidance for inspection and routine testing
15/30310515 DC : 0 BS EN 61951-1 ED 4.0 - SECONDARY CELLS AND BATTERIES CONTAINING ALKALINE OR OTHER NON-ACID ELECTROLYTES - SECONDARY SEALED CELLS AND BATTERIES FOR PORTABLE APPLICATIONS - PART 1: NICKEL CADMIUM
BS 7739-1:1994 Specification for capacitive type to be used for voltage exceeding 1 kV a.c.Voltage detectors
CEI EN 138000 : 1996 GENERIC SPECIFICATION: FIXED INDUCTORS FOR ELECTROMAGNETIC INTERFERENCE SUPPRESSION (INDUCTORS FOR WHICH SAFETY TESTS ARE REQUIRED)
BS CECC43002(1984) : 1984 AMD 7379 SPECIFICATION FOR HARMONIZED SYSTEM OF QUALITY ASSESSMENT FOR ELECTRONIC COMPONENTS - BLANK DETAIL SPECIFICATION - DIRECTLY HEATED NEGATIVE TEMPERATURE COEFFICIENT THERMISTORS
BS EN 196000:1993 Harmonized system of quality assessment for electronic components. Generic specification. Electromechanical switches
CEI EN 60115-8 : 2013 FIXED RESISTORS FOR USE IN ELECTRONIC EQUIPMENT - PART 8: SECTIONAL SPECIFICATION - FIXED SURFACE MOUNT RESISTORS
BS EN 61020-1:2009 Electromechanical switches for use in electrical and electronic equipment Generic specification
BS EN 186000-1:1994 Harmonized system of quality assessment for electronic components. Generic specification. Connector sets for optical fibres and cables Requirements, test methods and qualification approval procedures
I.S. EN 61248-2:1998 TRANSFORMERS AND INDUCTORS FOR USE IN ELECTRONIC AND TELECOMMUNICATION EQUIPMENT - PART 2: SECTIONAL SPECIFICATION FOR SIGNAL TRANSFORMERS ON THE BASIS OF THE CAPABILITY APPROVAL PROCEDURE
08/30192301 DC : 0 BS EN 60384-26 ED.1 - FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 26: SECTIONAL SPECIFICATION - ALUMINIUM ELECTROLYTIC CAPACITORS WITH CONDUCTIVE POLYMER SOLID ELECTROLYTE
BS EN 60966-3-1:2009 Radio frequency and coaxial cable assemblies Blank detail specification for semi-flexible coaxial cable assemblies
10/30218225 DC : 0 BS EN 60874-1 - FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - CONNECTORS FOR OPTICAL FIBRES AND CABLES - PART 1: GENERIC SPECIFICATION
BS EN 61808:2001 Secondary cells and batteries containing alkaline or other non-acid electrolytes. Sealed nickel-metal hydride button rechargeable single cells
13/30280680 DC : 0 BS EN 60947-3:2009+A1:2012+A2 - LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 3: SWITCHES, DISCONNECTORS, SWITCH-DISCONNECTORS AND FUSE-COMBINATION UNITS
14/30297431 DC : 0 BS EN 60875-1 - FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - NON-WAVELENGTH-SELECTIVE FIBRE OPTIC BRANCHING DEVICES - PART 1: GENERIC SPECIFICATION
BS CECC43004(1984) : 1984 AMD 1992 SPEC FOR HARMONIZED SYSTEM OF QUALITY ASSESSMENT FOR ELECTRONIC COMPONENTS - BLANK DETAIL SPEC - DIRECTLY HEATED NEGATIVE TEMPERATURE COEFFICIENT THERMISTORS (ROD TYPE)
CEI EN 60622 : 2003 SECONDARY CELLS AND BATTERIES CONTAINING ALKALINE OR OTHER NON-ACID ELECTROLYTES - SEALED NICKEL-CADMIUM PRISMATIC RECHARGEABLE SINGLE CELLS
99/201502 DC : 0
CEI EN 61076-4-104 : 2001 CONNECTORS FOR USE IN D.C. LOW FREQUENCY ANALOGUE AND DIGITAL HIGH SPEED DATA APPLICATIONS PART 4-104: PRINTED BOARD CONNECTORS WITH ASSESSED QUALITY DETAIL SPECIFICATION FOR TWO-PART MODULAR CONNECTORS, BASIC GIRD OF 2,0 MMS WITH TERMINATIONS ON A MULTIPLE GIRD OF 0,5 MM
BS EN 62811:2015 AC and/or DC-supplied electronic controlgear for discharge lamps (excluding fluorescent lamps). Performance requirements for low frequency squarewave operation
04/300382 DC : DRAFT JAN 2004 IEC 61347-2-1 A1 ED.1 - LAMP CONTROLGEAR - PART 2-1: PARTICULAR REQUIREMENTS FOR STARTING DEVICES (OTHER THAN GLOW STARTERS)
BS QC 760100:1991 Harmonized system of quality assessment for electronic components. Semiconductor devices. Integrated circuits. Sectional specification for film and hybrid integrated circuits: qualification approval
06/30153434 DC : DRAFT JULY 2006 BS IEC 60384-20 ED.2 - FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 20: SECTIONAL SPECIFICATION: FIXED METALLIZED POLYPHENYLENE SULFIDE FILM DIELECTRIC SURFACE MOUNT D.C. CAPACITORS
BS QC 300300:1998 Harmonized system of quality assessment for electronic components. Fixed capacitors for use in electronic equipment. Sectional specification: aluminium electrolytic capacitors with solid and non-solid electrolyte
BS EN 61730-2 : 2007 PHOTOVOLTAIC (PV) MODULE SAFETY QUALIFICATION - PART 2: REQUIREMENTS FOR TESTING
00/243911 DC : DRAFT AUG 2000 IEC 62124 - PHOTOVOLTAIC (PV) STAND-ALONE SYSTEMS - DESIGN QUALIFICATION AND TYPE APPROVAL
BS EN 61076-4-107:2001 Connectors for electronic equipment Printed board connectors with assessed quality. Detail specification for shielded two-part connectors having a basic grid of 2,0 mm, fixed part with solder and press-in terminations for printed boards, free part with non-accessible insulation displacement and crimp terminations
EN 60947-2:2017 Low-voltage switchgear and controlgear - Part 2: Circuit-breakers
10/30237980 DC : DRAFT NOV 2010 BS IEC 60393-2 - POTENTIOMETERS FOR USE IN ELECTRONIC EQUIPMENT - PART 2: SECTIONAL SPECIFICATION: LEAD-SCREW ACTUATED AND ROTARY PRESET POTENTIOMETERS
I.S. EN 60966-4:2003 RADIO FREQUENCY AND COAXIAL CABLE ASSEMBLIES - PART 4: SECTIONAL SPECIFICATION FOR SEMI-RIGID COAXIAL CABLE ASSEMBLIES
I.S. EN 60432-1:2004 INCANDESCENT LAMPS - SAFETY SPECIFICATIONS - PART 1 - TUNGSTEN FILAMENT LAMPS FOR DOMESTIC AND SIMILAR GENERAL LIGHTING PURPOSES (IEC 60432-1:1999 (MOD))
BS EN 61038:1993 Specification for time switches for tariff and load control
13/30266945 DC : 0 BS EN 62811 ED1.0 - AC AND/OR DC-SUPPLIED ELECTRONIC CONTROLGEAR FOR DISCHARGE LAMPS (EXCLUDING FLUORESCENT LAMPS) - PERFORMANCE REQUIREMENTS FOR LOW FREQUENCY SQUAREWAVE OPERATION
10/30218213 DC : 0 BS EN 61274-1 - FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - ADAPTORS FOR FIBRE OPTIC CONNECTORS - PART 1: GENERIC SPECIFICATION
CEI EN 60662 : 2013 HIGH-PRESSURE SODIUM VAPOUR LAMPS - PERFORMANCE SPECIFICATIONS
CEI EN 61076-4-102 : 1998 CONNECTORS WITH ASSESSED QUALITY, FOR USE IN D.C., LOW FREQUENCY ANALOGUE AND IN DIGITAL HIGH SPEED DATA APPLICATIONS - PART 4: PRINTED BOARD CONNECTORS SECTION 102: DETAIL SPECIFICATION FOR TWO-PART SINGLE-POLE CONNECTORS, FOR MULTIPLE USES ON PLUG-IN UNITS, WITH PRE-CENTRING, CODING AND EARLY MATING FEATURES, HAVING A METRIC GRID IN ACCORDANCE WITH IEC 60917
DIN EN 61810-5 : 1999 ELECTROMECHANICAL NON-SPECIFIED TIME ALL-OR-NOTHING RELAYS - PART 5: INSULATION COORDINATION
NF EN 60432-1 : 2001 AMD 2 2013 INCANDESCENT LAMPS - SAFETY SPECIFICATIONS - PART 1: TUNGSTEN FILAMENT LAMPS FOR DOMESTIC AND SIMILAR GENERAL LIGHTING PURPOSES
NF EN 50286 : 2005 ELECTRICAL INSULATING PROTECTIVE CLOTHING FOR LOW-VOLTAGE INSTALLATIONS
BS EN 61219:1994 Live working. Earthing or earthing and short-circuiting equipment using lances as a short-circuiting device. Lance earthing
BS CECC35000(1978) : 1978 AMD 7881 HARMONIZED SYSTEM OF QUALITY ASSESSMENT FOR ELECTRONIC COMPONENTS. GENERIC SPECIFICATION: TRAVELLING WAVE AMPLIFIER TUBES
BS EN 60873-2:2004 Electrical and pneumatic analogue chart recorders for use in industrial process control systems Guidance for inspection and routine testing
BS EN 60623:2017 Secondary cells and batteries containing alkaline or other non-acid electrolytes. Vented nickel-cadmium prismatic rechargeable single cells
I.S. EN 60384-9-1:2005 FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 9-1: BLANK DETAIL SPECIFICATION: FIXED CAPACITORS OF CERAMIC DIELECTRIC, CLASS 2 - ASSESSMENT LEVEL EZ
I.S. EN 60622:2003 SECONDARY CELLS AND BATTERIES CONTAINING ALKALINE OR OTHER NON-ACID ELECTROLYTES - SEALED NICKEL-CADMIUM PRISMATIC RECHARGEABLE SINGLE CELLS
I.S. 531:1991 TANTALUM SURFACE MOUNTING CAPACITORS (SECTIONAL SPECIFICATION) (REVISION)
BS EN 60384-3-1:2006 Fixed capacitors for use in electronic equipment Blank detail specification: surface mount fixed tantalum electrolytic capacitors with manganese dioxide solid electrolyte. Assessment level EZ
CEI EN 60384-2 : 2013 FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 2: SECTIONAL SPECIFICATION - FIXED METALLIZED POLYETHYLENE TEREPHTHALATE FILM DIELECTRIC D.C. CAPACITORS
CEI EN 175301-803 : 2007 DETAIL SPECIFICATION: RECTANGULAR CONNECTORS - FLAT CONTACTS, 0,8 MM THICKNESS, LOCKING SCREW NOT DETACHABLE
IEC 60115-5:1982 Fixed resistors for use in electronic equipment - Part 5: Sectional specification: Fixed precision resistors
BS EN 160201:1998 Harmonized system of quality assessment for electronic components. Blank detail specification. Microwave modular electronic units of assessed quality. Capability approval
BS EN 60384-11:2008 Fixed capacitors for use in electronic equipment Sectional specification. Fixed polyethylene-terephthalate film dielectric metal foil d.c. capacitors
BS EN 60368-4-1:2001 Piezoelectric filters. Blank detail specification. Capability approval
BS EN 175101-809:2004 Harmonized system of quality assessment for electronic components. Detail specification Two-part connectors for printed boards having a grid of 2,54 mm, short version in compliance with CECC 75 101-801, with assessed quality
BS EN 116000-1:1996 Harmonized system of quality assessment for electronic components. Generic specification: electromechanical all-or-nothing relays General
BS EN 61248-7:1998 Transformers and inductors for use in electronic and telecommunication equipment Sectional specification for high-frequency inductors and intermediate transformers on the basis of the capability approval procedure
BS CECC75200(1986) : 86 AMD 7483 HARMONIZED SYSTEM OF QUALITY ASSESSMENT FOR ELECTRONIC COMPONENTS: SECTIONAL SPECIFICATION: CIRCULAR CONNECTORS
07/30172547 DC : 0 BS EN 62074-1 - FIBRE OPTIC WDM DEVICES - PART 1: GENERIC SPECIFICATION
UNE-EN 61853-2:2017 Photovoltaic (PV) module performance testing and energy rating - Part 2: Spectral responsivity, incidence angle and module operating temperature measurements
02/208648 DC : DRAFT AUG 2002 IEC 60966-4 ED.2 - RADIO FREQUENCY AND COAXIAL CABLE ASSEMBLIES - PART 4: SECTIONAL SPECIFICATION FOR SEMI-RIGID COAXIAL CABLE ASSEMBLIES
BS CECC 31800:1988 Harmonized system of quality assessment for electronic components. Sectional specification: fixed polypropylene film dielectric metal foil d.c. capacitors
BS EN 60939-2-1:2004 Complete filter units for radio interference suppression Blank detail specification. Passive filter units for electromagnetic interference suppression. Filters for which safety tests are required (Assessment level D/DZ)
BS QC420102(1992) : 1992 SPECIFICATIONS FOR HARMONIZED SYSTEM OF QUALITY ASSESSMENT FOR ELECTRONIC COMPONENTS - VARISTORS FOR USE IN ELECTRONIC EQUIPMENT - BLANK DETAIL SPECIFICATION: ZINC OXIDE SURGE SUPPRESSION VARISTORS - ASSESSMENT LEVEL E
BS CECC 41101-007:1985 Harmonized blank detail specification for lead screw actuated non-wirewound preset potentiometers. Square form, container sealed, actuating device insulated from resistive element, slipping clutch at each end of travel, rigid terminations. Assessment level S.
BS EN 60384-18-1:2007 Fixed capacitors for use in electronic equipment Blank detail specification. Fixed aluminium electrolytic surface mount capacitors with solid (MnO2) electrolyte. Assessment level EZ
BS QC 410200:1992 Harmonized system of quality assessment for electronic components. Potentiometers for use in electronic equipment. Sectional specification for single-turn rotary power potentiometers
BS EN 60384-18-2:2007 Fixed capacitors for use in electronic equipment Blank detail specification. Fixed aluminium electrolytic surface mount capacitors with non-solid electrolyte. Assessment level EZ
05/30129971 DC : DRAFT FEB 2005 EN 140402-801 - DETAIL SPECIFICATION - FIXED LOW POWER WIRE-WOUND SURFACE MOUNT (SMD) RESISTORS - RECTANGULAR - STABILITY CLASSES 0,5; 1; 2
04/30125584 DC : DRAFT NOV 2004 IEC 61274-1 ED 2 - ADAPTORS FOR OPTICAL FIBRES AND CABLES - PART 2: GENERIC SPECIFICATION
BS EN 175300:1997 Harmonized system of quality assessment for electronic components. Sectional specification:rectangular connectors for frequencies below 3 MHz
BS 5971:1988 Specification for safety of tungsten filament lamps for domestic and similar general lighting purposes
I.S. EN 60966-3:2003 RADIO FREQUENCY AND COAXIAL CABLE ASSEMBLIES - PART 3: SECTIONAL SPECIFICATION FOR SEMI-FLEXIBLE COAXIAL CABLE ASSEMBLIES
01/203790 DC : DRAFT JUNE 2001 IEC 62093 ED.1 - BALANCE-OF-SYSTEM COMPONENTS FOR PHOTO-VOLTAIC SYSTEMS - DESIGN QUALIFICATION AND TYPE APPROVAL
04/30111650 DC : DRAFT MARCH 2004
BS EN 175200:1997 Harmonized system of quality assessment for electronic components. Sectional specification: circular connectors
07/30148822 DC : 0 BS IEC 62047-4 - SEMICONDUCTOR DEVICES - MICRO-ELECTROMECHANICAL DEVICES - PART 4: GENERIC SPECIFICATIONS FOR MEMS
BS EN 133100:1998 Harmonized system of quality assessment for electronic components. Sectional specification:passive filter units for electromagnetic interference suppression. Filters for which safety tests are not required
BS QC 400302:1992 Specification for harmonized system of quality assessment for electronic components. Fixed resistors for use in electronic equipment. Blank detail specification. Fixed precision resistors. Assessment level F
BS EN 61248-4:1997 Transformers and inductors for use in electronic and telecommunication equipment Sectional specification for power transformers for switched mode power supplies (SMPS) on the basis of the capability approval procedure
BS EN 62077:2016 Fibre optic interconnecting devices and passive components. Fibre optic circulators. Generic specification
NF EN 60947-4-2 : 2012 LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 4-2: CONTACTORS AND MOTOR-STARTERS - A.C. SEMICONDUCTOR MOTOR CONTROLLERS AND STARTERS
BS EN 60384-17:2005 Fixed capacitors for use in electronic equipment Sectional specification: Fixed metallized polypropylene film dielectric a.c. and pulse capacitors
BS CECC43001(1984) : 1984 AMD 7378 SPECIFICATION FOR HARMONIZED SYSTEM OF QUALITY ASSESSMENT FOR ELECTRONIC COMPONENTS - BLANK DETAIL SPECIFICATION - DIRECTLY HEATED NEGATIVE TEMPERATURE COEFFICIENT THERMISTORS
I.S. EN 61076-4-101:2002 CONNECTORS FOR ELECTRONIC EQUIPMENT - PART 4-101: PRINTED BOARD CONNECTORS WITH ASSESSED QUALITY - DETAIL SPECIFICATION FOR TWO-PART CONNECTOR MODULES, HAVING A BASIC GRID OF 2,0 MM FOR PRINTED BOARDS AND BACKPLANES IN ACCORDANCE WITH IEC 60917
NF EN 60738-1-3 : 2014 THERMISTORS - DIRECTLY HEATED POSITIVE STEP-FUNCTION TEMPERATURE COEFFICIENT - PART 1-3: BLANK DETAIL SPECIFICATION - INRUSH CURRENT APPLICATION - ASSESSMENT LEVEL EZ
BS EN 60874-1:2012 Fibre optic interconnecting devices and passive components. Connectors for optical fibres and cables Generic specification
BS EN 61436:1998 Secondary cells and batteries containing alkaline or other non-acid electrolytes. Sealed nickel-metal hydride rechargeable single cells
BS EN 61076-4-100:2002 Connectors with assessed quality, for use in d.c., low-frequency analogue and in digital high speed data applications. Printed board connectors Detail specification for two-part connector modules having a grid of 2,5 mm for printed boards and backplanes
NF EN 129000 : 2014 AMD 1 2014 GENERIC SPECIFICATION: FIXED RF WOUND INDUCTORS
I.S. EN 60393-2:2016 POTENTIOMETERS FOR USE IN ELECTRONIC EQUIPMENT - PART 2: SECTIONAL SPECIFICATION - LEAD-SCREW ACTUATED AND ROTARY PRESET POTENTIOMETERS
NF EN 61853-1 : 2011 PHOTOVOLTAIC (PV) MODULE PERFORMANCE TESTING AND ENERGY RATING - PART 1: IRRADIANCE AND TEMPERATURE PERFORMANCE MEASUREMENTS AND POWER RATING
IEC 61235:1993 Live working - Insulating hollow tubes for electrical purposes
CEI EN 61853-2 : 1ED 2017 PHOTOVOLTAIC (PV) MODULE PERFORMANCE TESTING AND ENERGY RATING - PART 2: SPECTRAL RESPONSIVITY, INCIDENCE ANGLE AND MODULE OPERATING TEMPERATURE MEASUREMENTS
NF EN 62319-1-1 : 2005 POLYMERIC THERMISTORS - DIRECTLY HEATED POSITIVE STEP FUNCTION TEMPERATURE COEFFICIENT - PART 1-1: BLANK DETAIL SPECIFICATION - CURRENT LIMITING APPLICATION
NF EN 60384-18-1 : 2008 FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 18-1: BLANK DETAIL SPECIFICATION - FIXED ALUMINIUM ELECTROLYTIC SURFACE MOUNT CAPACITORS WITH SOLID (MNO[2]) ELECTROLYTE - ASSESSMENT LEVEL EZ
I.S. EN 62595-1-1:2013 LCD BACKLIGHT UNIT - PART 1-1: GENERIC SPECIFICATION (IEC 62595-1-1:2013 (EQV))
IEC 60747-14-1:2010 Semiconductor devices - Part 14-1: Semiconductor sensors - Generic specification for sensors
I.S. EN 181000:1994 FIBRE OPTIC BRANCHING DEVICES (GENERIC SPECIFICATION)
I.S. EN 160100:1998 CAPABILITY APPROVAL OF MANUFACTURERS OF PRINTED BOARD ASSEMBLIES OFASSESSED QUALITY (SECTIONAL SPECIFICATION)
CEI EN 175301-801 : 2007 DETAIL SPECIFICATION: HIGH DENSITY RECTANGULAR CONNECTORS, ROUND REMOVABLE CRIMP CONTACTS
IEC 60115-8:2009 Fixed resistors for use in electronic equipment - Part 8: Sectional specification - Fixed surface mount resistors
I.S. EN 60384-22-1:2004 FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 22-1: BLANK DETAIL SPECIFICATION: FIXED SURFACE MOUNT MULTILAYER CAPACITORS OF CERAMIC DIELECTRIC, CLASS 2 - ASSESSMENT LEVEL EZ
I.S. EN 60662:2012 HIGH-PRESSURE SODIUM VAPOUR LAMPS - PERFORMANCE SPECIFICATIONS (IEC 60662:2011 (MOD))
I.S. EN 60770-2:2010 TRANSMITTERS FOR USE IN INDUSTRIAL-PROCESS CONTROL SYSTEMS - PART 2: METHODS FOR INSPECTION AND ROUTINE TESTING
I.S. EN 60384-26:2010 FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 26: SECTIONAL SPECIFICATION - FIXED ALUMINIUM ELECTROLYTIC CAPACITORS WITH CONDUCTIVE POLYMER SOLID ELECTROLYTE
I.S. EN 60384-3-1:2007 FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 3-1: BLANK DETAIL SPECIFICATION: SURFACE MOUNT FIXED TANTALUM ELECTROLYTIC CAPACITORS WITH MANGANESE DIOXIDE SOLID ELECTROLYTE - ASSESSMENT LEVEL EZ
IEC 60623 REDLINE : 5ED 2017 SECONDARY CELLS AND BATTERIES CONTAINING ALKALINE OR OTHER NON-ACID ELECTROLYTES - VENTED NICKEL-CADMIUM PRISMATIC RECHARGEABLE SINGLE CELLS
I.S. EN 60876-1:2014 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - FIBRE OPTIC SPATIAL SWITCHES - PART 1: GENERIC SPECIFICATION
I.S. EN 60947-3:2009 LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 3: SWITCHES, DISCONNECTORS, SWITCH-DISCONNECTORS AND FUSE-COMBINATION UNITS
CSA C22.2 NO. 60947-4-2:14 (R2019) Low-voltage switchgear and controlgear - Part 4-2: Contactors and motor-starters - AC semiconductor motor controllers and starters ( Bi-national standard, with UL 60947-4-2)
I.S. EN 60384-4-2:2007 FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 4-2: BLANK DETAIL SPECIFICATION - FIXED ALUMINIUM ELECTROLYTIC CAPACITORS WITH SOLID (MNO[2]) ELECTROLYTE - ASSESSMENT LEVEL EZ
I.S. EN 132400:1994 SECTIONAL SPECIFICATION: FIXED CAPACITORS FOR ELECTROMAGNETIC INTERFERENCE SUPPRESSION AND CONNECTION TO THE SUPPLY MAINS (ASSESSMENT LEVEL D)
I.S. EN 61248-6:1998 TRANSFORMERS AND INDUCTORS FOR USE IN ELECTRONIC AND TELECOMMUNICATION EQUIPMENT - PART 6: SECTIONAL SPECIFICATION FOR INDUCTORS ON THE BASIS OF THE CAPABILITY APPROVAL PROCEDURE
BS EN 140101-806 : 2008 DETAIL SPECIFICATION: FIXED LOW POWER FILM RESISTORS - METAL FILM RESISTORS ON HIGH GRADE CERAMIC, CONFORMAL COATED OR MOLDED, AXIAL OR PREFORMED LEADS
I.S. EN 60122-1:2002 AMD 1 2018 QUARTZ CRYSTAL UNITS OF ASSESSED QUALITY - PART 1: GENERIC SPECIFICATION
CEI EN 62310-3 : 2010 STATIC TRANSFER SYSTEMS (STS) - PART 3: METHOD FOR SPECIFYING PERFORMANCE AND TEST REQUIREMENTS
CEI EN 62134-1 : 2011 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - FIBRE OPTIC CLOSURES - PART 1: GENERIC SPECIFICATION
I.S. EN 60984:1993 SLEEVES OF INSULATING MATERIAL FOR LIVE WORKING
I.S. EN 175301-801:2006 DETAIL SPECIFICATION: HIGH DENSITY RECTANGULAR CONNECTORS, ROUND REMOVABLE CRIMP CONTACTS
I.S. EN 60947-4-1:2010 LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 4-1: CONTACTORS AND MOTOR-STARTERS - ELECTROMECHANICAL CONTACTORS AND MOTOR-STARTERS (IEC 60947-4-1:2009 (EQV))
I.S. EN 62259:2004 SECONDARY CELLS AND BATTERIES CONTAINING ALKALINE OR OTHER NON-ACID ELECTROLYTES - NICKEL-CADMIUM PRISMATIC SECONDARY SINGLE CELLS WITH PARTIAL GAS RECOMBINATION
NF EN 62595-1-1 : 2013 LCD BACKLIGHT UNIT - PART 1-1: GENERIC SPECIFICATION
I.S. EN 61274-1:2012 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - ADAPTORS FOR FIBRE OPTIC CONNECTORS - PART 1: GENERIC SPECIFICATION (IEC 61274-1:2011 (EQV))
I.S. EN 60384-4-1:2007 FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT PART 4-1: BLANK DETAIL SPECIFICATION - FIXED ALUMINIUM ELECTROLYTIC CAPACITORS WITH NON-SOLID ELECTROLYTE - ASSESSMENT LEVEL EZ
EN 60255-23:1996 Electrical relays - Part 23: Contact performance
I.S. EN 61313-1:1999 FIBRE OPTIC PASSIVE COMPONENTS AND CABLE ASSEMBLIES - PART 1: CAPABILITY APPROVAL - GENERIC SPECIFICATION
I.S. EN 61811-1:2015 ELECTROMECHANICAL TELECOM ELEMENTARY RELAYS OF ASSESSED QUALITY - PART 1: GENERIC SPECIFICATION AND BLANK DETAIL SPECIFICATION
CEI EN 60122-1 : 2004 QUARTZ CRYSTAL UNITS OF ASSESSED QUALITY - PART 1: GENERIC SPECIFICATION
UNE-EN 60432-3:2013 Incandescent lamps - Safety specifications - Part 3: Tungsten-halogen lamps (non-vehicle)
NF EN 129200 : 2014 AMD 1 2014 SECTIONAL SPECIFICATION: FIXED INDUCTORS WITH CERAMIC OR FERRITE CORE WOUND WITH COPPER WIRE FOR RF CIRCUITS
NF EN 62319-1 : 2005 POLYMERIC THERMISTORS - DIRECTLY HEATED POSITIVE STEP FUNCTION TEMPERATURE COEFFICIENT - PART 1: GENERIC SPECIFICATION
NF EN 60065 : 2015 AMD 11 2018 AUDIO, VIDEO AND SIMILAR ELECTRONIC APPARATUS - SAFETY REQUIREMENTS
BIS IS/IEC 60947-4-1 : 2000 LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 4: CONTACTORS AND MOTOR-STARTERS - SECTION 1: ELECTROMECHANICAL CONTACTORS AND MOTOR-STARTERS
CEI EN 61076-4-105 : 2001 CONNECTORS WITH ASSESSED QUALITY, FOR USE IN D.C., LOW FREQUENCY ANALOGUE AND IN DIGITAL HIGH-SPEED DATA APPLICATIONS - PRINTED BOARD CONNECTORS - DETAIL SPECIFICATION FOR 9 MM CIRCULAR CONNECTOR WITH 3 TO 8 CONTACTS FOR USE IN A WIDE RANGE OF APPLICATIONS INCLUDING THE TELECOMMUNICATION= AND AUDIO INDUSTRY
CEI EN 60939-1 : 2011 PASSIVE FILTER UNITS FOR ELECTROMAGNETIC INTERFERENCE SUPPRESSION - PART 1: GENERIC SPECIFICATION
BS EN 62035:2014 Discharge lamps (excluding fluorescent lamps). Safety specifications
I.S. EN 60738-1-2:2008 THERMISTORS - DIRECTLY HEATED POSITIVE STEP-FUNCTION TEMPERATURE COEFFICIENT - PART 1-2: BLANK DETAIL SPECIFICATION - HEATING ELEMENT APPLICATION - ASSESSMENT LEVEL EZ
I.S. EN 62197-1:2006 CONNECTORS FOR ELECTRONIC EQUIPMENT - QUALITY ASSESSMENT REQUIREMENTS - PART 1: GENERIC SPECIFICATION
I.S. EN 61076-4-108:2002 CONNECTORS FOR ELECTRONIC EQUIPMENT - PART 4-108: PRINTED BOARD CONNECTORS WITH ASSESSED QUALITY - DETAIL SPECIFICATION FOR CABLE-TO-BOARD CONNECTORS, WITH A MODULAR PITCH OF 25 MM AND INTEGRATED SHIELDING FUNCTION, APPLICABLE FOR TRANSVERSE PACKING DENSITY OF 15 MM, HAVING A BASIC GRID OF 2,5 MM IN ACCORDANCE WITH IEC 60917-1
I.S. EN 140401-801:2007 DETAIL SPECIFICATION: FIXED LOW POWER FILM SMD RESISTORS - RECTANGULAR - STABILITY CLASSES 0,1; 0,25; 0,5; 1
IEC 60807-1:1991 Rectangular connectors for frequencies below 3 MHz - Part 1:Generic specification - General requirements and guide for thepreparation of detail specifications for connectors with assessedquality
IEC 60758:2016 Synthetic quartz crystal - Specifications and guidelines for use
I.S. EN 175101-809:2004 DETAIL SPECIFICATION - TWO-PART CONNECTORS FOR PRINTED BOARDS HAVING A GRID OF 2.54 MM, SHORT VERSION IN COMPLIANCE WITH CECC 75101-801, WITH ASSESSED QUALITY
I.S. EN 60384-13:2012 FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 13: SECTIONAL SPECIFICATION - FIXED POLYPROPYLENE FILM DIELECTRIC METAL FOIL D.C. CAPACITORS (IEC 60384-13:2011 (EQV))
I.S. CECC 86000:1993 CONNECTOR SETS FOR OPTICAL FIBRES AND CABLES - PART 1: REQUIREMENTS, TEST METHODS AND QUALIFICATION APPROVAL PROCEDURES (GENERIC SPECIFICATION)
I.S. EN 61988-5:2009 PLASMA DISPLAY PANELS - PART 5: GENERIC SPECIFICATION
IEC 61440:1997 Secondary cells and batteries containing alkaline or other non-acid electrolytes - Sealed nickel-cadmium small prismatic rechargeable single cells
IEC 61261-2-1:1994 Piezoelectric ceramic filters for use in electronic equipment - A specification in the IEC quality assessment system for electronic components (IECQ) - Part 2: Sectional specification - Qualification approval - Section 1: Blank detail specification - Assessment level E
EN 140401-803 : 2007 AMD 3 2017 DETAIL SPECIFICATION: FIXED LOW POWER FILM SMD RESISTORS - CYLINDRICAL - STABILITY CLASSES 0,05; 0,1; 0,25; 0,5; 1; 2
EN 140101-806 : 2008 COR 2014 DETAIL SPECIFICATION: FIXED LOW POWER FILM RESISTORS - METAL FILM RESISTORS ON HIGH GRADE CERAMIC, CONFORMAL COATED OR MOLDED, AXIAL OR PREFORMED LEADS
EN 140401-801:2007/A1:2013 DETAIL SPECIFICATION: FIXED LOW POWER FILM SMD RESISTORS - RECTANGULAR - STABILITY CLASSES 0,1; 0,25; 0,5; 1
IEC 60546-2:2010 Controllers with analogue signals for use in industrial-process control systems - Part 2: Guidance for inspection and routine testing
07/30091745 DC : 0 BS IEC 62368 - AUDIO/VIDEO, INFORMATION AND COMMUNICATION TECHNOLOGY EQUIPMENT - SAFETY - REQUIREMENTS
IEC 60384-3-1:2006 Fixed capacitors for use in electronic equipment - Part 3-1: Blank detail specification: Surface mount fixed tantalum electrolytic capacitors with manganese dioxide solid electrolyte - Assessment level EZ
IEC 60432-3:2012 Incandescent lamps - Safety specifications - Part 3: Tungsten halogen lamps (non-vehicle)
IEC 61076-4-104:1999 Connectors for use in d.c., low frequency analogue and digital high speed data applications - Part 4-104: Printed board connectors with assessed quality - Detail specification for two-part modular connectors, basic grid of 2,0 mm, with terminations on a multiple grid of 0,5 mm
IEC 60384-9-1:2005 Fixed capacitors for use in electronic equipment - Part 9-1: Blank detail specification: Fixed capacitors of ceramic dielectric, Class 2 - Assessment level EZ
IEC 60947-6-2:2002+AMD1:2007 CSV Low-voltage switchgear and controlgear - Part 6-2: Multiple function equipment - Control and protective switching devices (or equipment) (CPS)
BS EN 61646:2008 Thin-film terrestrial photovoltaic (PV) modules. Design qualification and type approval
IEC 62391-2-1:2006 Fixed electric double-layer capacitors for use in electronic equipment - Part 2-1: Blank detail specification - Electric double-layer capacitors for power application - Assessment level EZ
IEC 62259:2003 Secondary cells and batteries containing alkaline or other non-acid electrolytes - Nickel-cadmium prismatic secondary single cells with partial gas recombination
IEC 60603-2:1995 Connectors for frequencies below 3 MHz for use with printed boards - Part 2: Detail specification for two-part connectors with assessed quality, for printed boards, for basic grid of 2,54 mm (0,1 in) with common mounting features
IEC 60947-3:2008+AMD1:2012+AMD2:2015 CSV Low-voltage switchgear and controlgear - Part 3: Switches, disconnectors, switch-disconnectors and fuse-combination units
IEC 60623:2017 Secondary cells and batteries containing alkaline or other non-acid electrolytes - Vented nickel-cadmium prismatic rechargeable single cells
IEC 61048:2006+AMD1:2015 CSV Auxiliaries for lamps - Capacitors for use in tubular fluorescent and other discharge lamp circuits - General and safety requirements
EN 62099:2001 Fibre optic wavelength switches - Generic specification
EN 61248-7:1997 Transformers and inductors for use in electronic and telecommunication equipment - Part 7: Sectional specification for high-frequency inductors and intermediate frequency transformers on the basis of the capability approval procedure
EN 60357:2003/A11:2016 TUNGSTEN HALOGEN LAMPS (NON-VEHICLE) - PERFORMANCE SPECIFICATIONS
EN 61076-4-100:2001 Connectors for electronic equipment - Part 4-100: Printed board connectors with assessed quality - Detail specification for two-part connector modules having a grid of 2,5 mm for printed boards and backplanes
EN 61038:1992/A2:1998 ELECTRICITY METERING - TARIFF AND LOAD CONTROL - PARTICULAR REQUIREMENTS FOR TIME SWITCHES
NF EN 60384-13 : 2012 FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 13: SECTIONAL SPECIFICATION - FIXED POLYPROPYLENE FILM DIELECTRIC METAL FOIL D.C. CAPACITORS
EN 61195:1999/A2:2015 DOUBLE-CAPPED FLUORESCENT LAMPS - SAFETY SPECIFICATIONS (IEC 61195:1999/A2:2014)
EN 60603-2:1998/A1:2005 CONNECTORS FOR FREQUENCIES BELOW 3 MHZ FOR USE WITH PRINTED BOARDS - PART 2: DETAIL SPECIFICATION FOR TWO-PART CONNECTORS WITH ASSESSED QUALITY, FOR PRINTED BOARDS, FOR BASIC GRID OF 2,54 MM (0,1 IN) WITH COMMON MOUNTING FEATURES
EN 60966-2-1:2009 Radio frequency and coaxial cable assemblies - Part 2-1: Sectional specification for flexible coaxial cable assemblies
EN 61810-5 : 1998 ELECTROMECHANICAL NON-SPECIFIED TIME ALL-OR-NOTHING RELAYS - INSULATION COORDINATION
EN 61048:2006/A1:2016 AUXILIARIES FOR LAMPS - CAPACITORS FOR USE IN TUBULAR FLUORESCENT AND OTHER DISCHARGE LAMP CIRCUITS - GENERAL AND SAFETY REQUIREMENTS (IEC 61048:2006/A1:2015)
EN 61978-1:2014 Fibre optic interconnecting devices and passive components - Fibre optic passive chromatic dispersion compensators - Part 1: Generic specification
EN 60384-8-1:2005 Fixed capacitors for use in electronic equipment - Part 8-1: Blank detail specification: Fixed capacitors of ceramic dielectric, Class 1 - Assessment level EZ
EN 60770-2:2010 Transmitters for use in industrial-process control systems - Part 2: Methods for inspection and routine testing
EN 61248-6:1997 Transformers and inductors for use in electronic and telecommunication equipment - Part 6: Sectional specification for inductors on the basis of the capability approval procedure
EN 60875-1:2015 Fibre optic interconnecting devices and passive components - Non-wavelength-selective fibre optic branching devices - Part 1: Generic specification
EN 50237:1997 Gloves and mitts with mechanical protection for electrical purposes
EN 60384-18-2 : 2007 Fixed capacitors for use in electronic equipment - Part 18-2: Blank detail specification - Fixed aluminium electrolytic surface mount capacitors with non-solid electrolyte - Assessment level EZ
EN 60432-2:2000/A2:2012 INCANDESCENT LAMPS - SAFETY SPECIFICATIONS - PART 2: TUNGSTEN HALOGEN LAMPS FOR DOMESTIC AND SIMILAR GENERAL LIGHTING PURPOSES
EN 61076-4-107:2001 Connectors for electronic equipment - Part 4-107: Printed board connectors with assessed quality - Detail specification for shielded two-part connectors having a basic grid of 2,0 mm, fixed part with solder and press-in terminations for printed boards, free part with non-accessible insulation displacement and crimp terminations
EN 111000 : 1991 Generic Specification: Cathode ray tubes
EN 61193-2 : 2007 QUALITY ASSESSMENT SYSTEMS - PART 2: SELECTION AND USE OF SAMPLING PLANS FOR INSPECTION OF ELECTRONIC COMPONENTS AND PACKAGES
EN 61076-4-111:2002 Connectors for electronic equipment - Part 4-111: Printed board connectors with assessed quality - Detail specification for two-part power connector modules, for printed boards and backplanes having early mating features, and having a basic grid of 2,5 mm in accordance with IEC 60917-1
EN 60921:2004/A1:2006 BALLASTS FOR TUBULAR FLUORESCENT LAMPS - PERFORMANCE REQUIREMENTS
EN 61037:1992/A2:1998 ELECTRONIC METERING - TARIFF AND LOAD CONTROL - PARTICULAR REQUIREMENTS FOR ELECTRONIC RIPPLE CONTROL RECEIVERS
EN 61076-3-100:2000 Connectors for use in d.c., low-frequency analogue and digital high speed data applications - Part 3-100: Rectangular connectors with assessed quality - Detail specification for a range of shielded connectors with trapezoidal-shaped shells and non-removable ribbon contacts on a 1,27 mm double row
EN 60947-7-2:2009 Low-voltage switchgear and controlgear - Part 7-2: Ancillary equipment - Protective conductor terminal blocks for copper conductors
EN 61988-5 : 2009 PLASMA DISPLAY PANELS - PART 5: GENERIC SPECIFICATION
EN 62341-1-1:2009 Organic light emitting diode (OLED) displays - Part 1-1: Generic specifications
EN 134100:1995 Sectional Specification: Variable capacitors (Qualification approval)
EN 119000 : 1996 HARMONIZED SYSTEM OF QUALITY ASSESSMENT FOR ELECTRONIC COMPONENTS: GENERIC SPECIFICATION: DRY AND MERCURY WETTED REED CONTACT UNITS
EN 132400 : 1994 AMD 4 2001 SECTIONAL SPECIFICATION: FIXED CAPACITORS FOR ELECTROMAGNETIC INTERFERENCE SUPPRESSION AND CONNECTION TO THE SUPPLY MAINS (ASSESSMENT LEVEL D)
EN 61243-2:1997/A2:2002 LIVE WORKING - VOLTAGE DETECTORS - PART 2: RESISTIVE TYPE TO BE USED FOR VOLTAGES OF 1 KV TO 36 KV A.C.
EN 60873-2:2004 Electrical and pneumatic analogue chart recorders for use in industrial process control systems - Part 2: Guidance for inspection and routine testing
EN 50547:2013 Railway applications - Batteries for auxiliary power supply systems
EN 61248-1 : 1997 Transformers and inductors for use in electronic and telecommunication equipment - Part 1: Generic specification
EN 60122-1:2002/A1:2018 QUARTZ CRYSTAL UNITS OF ASSESSED QUALITY - PART 1: GENERIC SPECIFICATION (IEC 60122-1:2002/A1:2017)
EN 60384-3-1:2006/corrigendum:2009 FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 3-1: BLANK DETAIL SPECIFICATION: SURFACE MOUNT FIXED TANTALUM ELECTROLYTIC CAPACITORS WITH MANGANESE DIOXIDE SOLID ELECTROLYTE - ASSESSMENT LEVEL EZ
EN 60432-1:2000/A2:2012 INCANDESCENT LAMPS - SAFETY SPECIFICATIONS - PART 1 - TUNGSTEN FILAMENT LAMPS FOR DOMESTIC AND SIMILAR GENERAL LIGHTING PURPOSES (IEC 60432-1:1999/A2:2011)
EN 61440 : 1997 SECONDARY CELLS AND BATTERIES CONTAINING ALKALINE OR OTHER NON-ACID ELECTROLYTES - SEALED NICKEL CADMIUM SMALL PRISMATIC RECHARGEABLE SINGLE CELLS
EN 60393-6:2016 Potentiometers for use in electronic equipment - Part 6: Sectional specification - Surface mount preset potentiometers
EN 123000:1991/A2:1996 GENERIC SPECIFICATION: PRINTED BOARDS
EN 60384-11:2008 Fixed capacitors for use in electronic equipment - Part 11: Sectional specification - Fixed polyethylene-terephthalate film dielectric metal foil d.c. capacitors
EN 60622:2003 Secondary cells and batteries containing alkaline or other non-acid electrolytes - Sealed nickel-cadmium prismatic rechargeable single cells
EN 61747-1:1999/A1:2003 LIQUID CRYSTAL AND SOLID-STATE DISPLAY DEVICES - PART 1: GENERIC SPECIFICATION
EN 60384-16:2005 Fixed capacitors for use in electronic equipment - Part 16: Sectional specification: Fixed metallized polypropylene film dielectric d.c. capacitors
EN 60368-1:2000/A1:2004 PIEZOELECTRIC FILTERS OF ASSESSED QUALITY - PART 1: GENERIC SPECIFICATION
EN 60115-8:2012 Fixed resistors for use in electronic equipment - Part 8: Sectional specification - Fixed surface mount resistors
EN 60368-4-1:2000 Piezoelectric filters of assessed quality - Part 4-1: Blank detail specification - Capability approval
EN 175200:1996 Sectional Specification: Circular connectors
EN 62246-1-1:2013 Reed switches - Part 1-1: Generic specification - Quality assessment
EN 160201 : 1997 MICROWAVE MODULAR ELECTRONIC UNITS OF ASSESSED QUALITY - CAPABILITY APPROVAL (BLANK DETAIL SPECIFICATION)
EN 61269-1:1997 Fibre optic terminus sets - Part 1: Generic specification
EN 62391-2:2006 Fixed electric double-layer capacitors for use in electronic equipment - Part 2: Sectional specification - Electric double-layer capacitors for power application
EN 61076-2-102:2002 Connectors for electronic equipment - Part 2-102: Circular connectors with assessed quality - Detail specification for plugs and jacks for external low voltage power supply
EN 61274-1:2012 Fibre optic interconnecting devices and passive components - Adaptors for fibre optic connectors - Part 1: Generic specification
EN 60603-1:1998 Connectors for frequencies below 3 MHz for use with printed boards - Part 1: Generic specification - General requirements and guide for the preparation of detail specifications, with assessed quality
EN 130200:1993/A3:1998 HARMONIZED SYSTEM OF QUALITY ASSESSMENT FOR ELECTRONIC COMPONENTS - SECTIONAL SPECIFICATION: FIXED TANTALUM CAPACITORS WITH NON-SOLID OR SOLID ELECTROLYTE
EN 60939-2-1:2004 Complete filter units for radio interference suppression - Part 2-1: Blank detail specification - Passive filter units for electromagnetic interference suppression - Filters for which safety tests are required (assessment level D/DZ)
EN 60393-5 : 2016 Potentiometers for use in electronic equipment - Part 5: Sectional specification - Single-turn rotary low-power wirewound and nonwirewound potentiometers
EN 62093:2005 Balance-of-system components for photovoltaic systems - Design qualification natural environments
EN 61646:2008 THIN-FILM TERRESTRIAL PHOTOVOLTAIC (PV) MODULES - DESIGN QUALIFICATION AND TYPE APPROVAL
EN 60384-22-1:2004 Fixed capacitors for use in electronic equipment - Part 22-1: Blank detail specification: Fixed surface mount multilayer capacitors of ceramic dielectric, Class 2 - Assessment level EZ
EN 143000 : 1991 THERMISTORS (GENERIC SPECIFICATION)
EN 61347-2-1:2001/A2:2014 LAMP CONTROLGEAR - PART 2-1: PARTICULAR REQUIREMENTS FOR STARTING DEVICES (OTHER THAN GLOW STARTERS) (IEC 61347-2-1:2000/A2:2013)
EN 137000:1995 Generic Specification: Fixed aluminium electrolytic a.c. capacitors with non-solid electrolyte for use with motors
EN 61076-4-104:1999 Connectors for use in d.c. low-frequency analogue and digital high speed data applications - Part 4-104: Printed board connectors with assessed quality - Detail specification for two-part modular connectors, basic grid of 2,0 mm, with terminations on a multiple grid of 0,5 mm
EN 60876-1:2014 Fibre optic interconnecting devices and passive components - Fibre optic spatial switches - Part 1: Generic specification
EN 60384-17:2005 Fixed capacitors for use in electronic equipment - Part 17: Sectional specification: Fixed metallized polypropylene film dielectric a.c. and pulse capacitors
EN 61811-50:2002 Electromechanical all-or-nothing relays - Part 50: Sectional specification - Electromechanical all-or-nothing telecom relays of assessed quality
EN 62435-2:2017 Electronic components - Long-term storage of electronic semiconductor devices - Part 2: Deterioration mechanisms
EN 140100:2008 Sectional Specification: Fixed low power film resistors
EN 60393-2:2016 Potentiometers for use in electronic equipment - Part 2: Sectional specification - Lead-screw actuated and rotary preset potentiometers
EN 175300:1996 Sectional Specification: Rectangular connectors for frequencies below 3 MHz
EN 50321:1999 Electrically insulating footwear for working on low voltage installations
EN 129200 : 1994 AMD 1 1995 SECTIONAL SPECIFICATION: FIXED INDUCTORS WITH CERAMIC OR FERRITE CORE WOUND WITH COPPER WIRE FOR RF CIRCUITS
EN 60384-21-1:2004 Fixed capacitors for use in electronic equipment - Part 21-1: Blank detail specification: Fixed surface mount multilayer capacitors of ceramic dielectric, Class 1 - Assessment level EZ
EN 60929:2011/A1:2016 AC AND/OR DC-SUPPLIED ELECTRONIC CONTROL GEAR FOR TUBULAR FLUORESCENT LAMPS - PERFORMANCE REQUIREMENTS
EN 62319-1-1:2005 Polymeric thermistors - Directly heated positive step function temperature coefficient - Part 1-1: Blank detail specification - Current limiting application
EN 60384-9-1:2005 Fixed capacitors for use in electronic equipment - Part 9-1: Blank detail specification: Fixed capacitors of ceramic dielectric, Class 2 - Assessment level EZ
EN 61047:2004 DC or AC supplied electronic step-down convertors for filament lamps - Performance requirements
EN 62811:2015 AC and/or DC-supplied electronic controlgear for discharge lamps (excluding fluorescent lamps) - Performance requirements for low frequency squarewave operation
EN 60393-1:2009 Potentiometers for use in electronic equipment - Part 1: Generic specification
EN 60384-26 : 2010 FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 26: SECTIONAL SPECIFICATION - FIXED ALUMINIUM ELECTROLYTIC CAPACITORS WITH CONDUCTIVE POLYMER SOLID ELECTROLYTE
EN 60432-3:2013 Incandescent lamps - Safety specifications - Part 3: Tungsten-halogen lamps (non-vehicle)
EN 61020-1:2009 Electromechanical switches for use in electrical and electronic equipment - Part 1: Generic specification
EN 61248-3:1997 Transformers and inductors for use in electronic and telecommunication equipment - Part 3: Sectional specification for power transformers on the basis of the capability approval procedure
EN 140000 : 1993 GENERIC SPECIFICATION: FIXED RESISTORS
EN 61248-5:1997 Transformers and inductors for use in electronic and telecommunication equipment - Part 5: Sectional specification for pulse transformers on the basis of the capability approval procedure
BS CECC 40000:1980 Harmonized system of quality assessment for electronic components. Generic specification: fixed resistors
BS CECC20001(1991) : 1991 AMD 8000 HARMONIZED SYSTEM OF QUALITY ASSESSMENT FOR ELECTRONIC COMPONENTS: LIGHT EMITTING DIODES, LIGHT EMITTING DIODE ARRAYS, LIGHT EMITTING DIODE DISPLAYS WITHOUT INTEGRAL LOGIC AND RESISTORS
BS CECC 30201:1988 Specification for harmonized system of quality assessment for electronic components. Blank detail specification: fixed tantalum capacitors with solid electrolyte, porous anode (sub-family 3)
BS CECC 30200:1986 Harmonized system of quality assessment for electronic components. Sectional specification: fixed tantalum capacitors with non-solid or solid electrolyte
BS CECC 30000:1992 Harmonized system of quality assessment for electronic components. Generic specification: fixed capacitors
BS CECC 30000:1984 Harmonized system of quality assessment for electronic components: generic specification: fixed capacitors
BS 4200-7:1982 Guide on the reliability of electronic equipment and parts used therein The inclusion of reliability clauses into specifications for components (or parts) for electronic equipment

View more information
$661.46
Including GST where applicable

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.

Need help?
Call us on 131 242, then click here to start a Screen Sharing session
so we can help right away! Learn more