Customer Support: 131 242

  • There are no items in your cart
We noticed you’re not on the correct regional site. Switch to our AMERICAS site for the best experience.
Dismiss alert

IEC 61260:1995

Superseded
Superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

View Superseded by
superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

Electroacoustics - Octave-band and fractional-octave-band filters
Available format(s)

Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users

Superseded date

23-03-2016

Published date

08-08-1995

FOREWORD
1 Scope
2 Normative references
3 Definitions
4 Performance requirements
5 Test methods
6 Instrument making
7 Instruction manual
Tables
1 Limits on relative attenuation for octave-band filters
    A.1 Midband frequencies for octave-band and one-third-
          band filters in the audio range
    B.1 Limits on relative attenuation for one-third-
          octave-band filters
Annexes
A Midband frequencies
B Normalized frequencies at breakpoints of limits on minimum
    and maximum relative attenuation for one-third-octave-band
    filters
C Recommendations for verification of the electrical
    performance characteristics of bandpass filters

Provides performance requirements and methods for testing the performance of analogue, sampled-data, and digital implementations of bandpass filters that comprise a filter set or spectrum analyzer.This publication supersedes IEC 60225.

DevelopmentNote
BS draft 98/231051 DC refers to amendment. Supersedes IEC 60225 (03/2001) Also numbered as BS EN 61260. (09/2002) Stability Date: 2014. (10/2012) Fully replaced/withdrawn upon publication of IEC 61260-2 and IEC 61260-3. (02/2014)
DocumentType
Standard
Pages
74
PublisherName
International Electrotechnical Committee
Status
Superseded
SupersededBy
Supersedes

UNE-EN 15461:2008 Railway applications - Noise emission - Characterisation of the dynamic properties of track sections for pass by noise measurements
CEI EN 60349-4 : 2014 ELECTRIC TRACTION - ROTATING ELECTRICAL MACHINES FOR RAIL AND ROAD VEHICLES - PART 4: PERMANENT MAGNET SYNCHRONOUS ELECTRICAL MACHINES CONNECTED TO AN ELECTRONIC CONVERTER
BS EN 60349-1:2010 Electric traction. Rotating electrical machines for rail and road vehicles Machines other than electronic converter-fed alternating current motors
04/30065335 DC : DRAFT JAN 2004 BS ISO 16832 - ACOUSTICS - LOUDNESS SCALING BY MEANS OF CATEGORIES
00/561015 DC : DRAFT FEB 2000 BS EN ISO 3745 - ACOUSTICS - DETERMINATION OF SOUND POWER LEVELS OFNOISE SOURCES USING SOUND PRESSURE - PRECISION METHODS FOR ANECHOICAND HEMI-ANECHOIC ROOMS
05/30134086 DC : DRAFT MAY 2005 IEC 61996-2 ED1 - MARITIME NAVIGATION AND RADIOCOMMUNICATION EQUIPMENT AND SYSTEMS - SHIPBORNE VOYAGE DATA RECORDER (VDR) - PART 2: SIMPLIFIED VOYAGE DATA RECORDER (S-VDR) PERFORMANCE REQUIREMENTS - METHODS OF TESTING AND REQUIRED TEST RESULTS
I.S. EN ISO 3382:2000 ACOUSTICS - MEASUREMENT OF THE REVERBERATION TIME OF ROOMS WITH REFERENCE TO OTHER ACOUSTICAL PARAMETERS
BS EN 1793-6:2012 Road traffic noise reducing devices. Test method for determining the acoustic performance Intrinsic characteristics. In situ values of airborne sound insulation under direct sound field conditions
I.S. EN ISO 4869-3:2007 ACOUSTICS - HEARING PROTECTORS - PART 3: MEASUREMENT OF INSERTION LOSS OF EAR-MUFF TYPE PROTECTORS USING AN ACOUSTIC TEST FIXTURE
ISO 9611:1996 Acoustics — Characterization of sources of structure-borne sound with respect to sound radiation from connected structures — Measurement of velocity at the contact points of machinery when resiliently mounted
BS EN 60118-15:2012 Electroacoustics. Hearing aids Methods for characterising signal processing in hearing aids with a speech-like signal
DIN EN ISO 3382-3:2012-05 Acoustics - Measurement of room acoustic parameters - Part 3: Open plan offices (ISO 3382-3:2012)
01/565186 DC : DRAFT DEC 2001 ISO 11904-2 - ACOUSTICS - DETERMINATION OF SOUND EMISSIONS FROM SOUND SOURCES PLACED CLOSE TO THE EAR - PART 2: TECHNIQUE USING A MANIKIN (MANIKIN-TECHNIQUE)
12/30258455 DC : 0 FPREN 60065:2011+FPRAA - AUDIO, VIDEO AND SIMILAR ELECTRONIC APPARATUS - SAFETY REQUIREMENTS
17/30362053 DC : DRAFT SEP 2017 BS EN ISO 16283-2 - ACOUSTICS - FIELD MEASUREMENT OF SOUND INSULATION IN BUILDINGS AND OF BUILDING ELEMENTS - PART 2: IMPACT SOUND INSULATION
I.S. EN ISO 3382-3:2012 ACOUSTICS - MEASUREMENT OF ROOM ACOUSTIC PARAMETERS - PART 3: OPEN PLAN OFFICES (ISO 3382-3:2012)
BS ISO 6969:2004 Road vehicles. Sound signalling devices. Tests after mounting on vehicle
04/30118161 DC : DRAFT AUG 2004 ISO 22472 - SHIPS AND MARINE TECHNOLOGY - GUIDELINES FOR THE INSTALLATION AND OPERATION OF VOYAGE DATA RECORDER (VDR)
12/30219256 DC : 0 BS ISO 15619 - RECIPROCATING INTERNAL COMBUSTION ENGINES - MEASUREMENT METHOD FOR EXHAUST SILENCERS - SOUND POWER LEVEL OF EXHAUST NOISE AND INSERTION LOSS USING SOUND PRESSURE AND POWER LOSS RATIO
DIN ISO 2954 E : 2012 MECHANICAL VIBRATION OF ROTATING AND RECIPROCATING MACHINERY - REQUIREMENTS FOR INSTRUMENTS FOR MEASURING VIBRATION SEVERITY (ISO 2954:2012)
BS ISO 20233-1:2018 Ships and marine technology. Model test method for propeller cavitation noise evaluation in ship design Source level estimation
DIN EN ISO 16283-3:2016-09 ACOUSTICS - FIELD MEASUREMENT OF SOUND INSULATION IN BUILDINGS AND OF BUILDING ELEMENTS - PART 3: FAADE SOUND INSULATION (ISO 16283-3:2016)
NF ISO 21289 : 2008 MECHANICAL VIBRATION AND SHOCK - PARAMETERS TO BE SPECIFIED FOR THE ACQUISITION OF VIBRATION DATA
ANSI S12.62 : 2012 ACOUSTICS - ATTENUATION OF SOUND DURING PROPAGATION OUTDOORS - PART 2: GENERAL METHOD OF CALCULATION
BS EN 61265:1995 Electroacoustics. Instruments for measurement of aircraft noise. Performance requirements for systems to measure one-third-octave band sound pressure levels in noise certification of transport-category aircraft
05/30129922 DC : DRAFT FEB 2005 EN 15036-2 - HEATING BOILERS - TEST REGULATIONS FOR THE AIRBORNE NOISE EMISSIONS FROM HEAT GENERATORS - PART 2: FLUE GAS NOISE EMISSIONS AT THE OUTLET OF THE HEAT GENERATOR
07/30162190 DC : 0 BS EN 61996-2 - MARITIME NAVIGATION AND RADIOCOMMUNICATION EQUIPMENT AND SYSTEMS - SHIPBORNE VOYAGE DATA RECORDER (VDR) - PART 2: SIMPLIFIED VOYAGE DATA RECORDER (S-VDR) - PERFORMANCE REQUIREMENTS, METHODS OF TESTING AND REQUIRED TEST RESULTS
DIN EN ISO 13473-5:2010-04 Characterization of pavement texture by use of surface profiles - Part 5: Determination of megatexture (ISO 13473-5:2009)
DIN EN 1793-4:2015-05 ROAD TRAFFIC NOISE REDUCING DEVICES - TEST METHOD FOR DETERMINING THE ACOUSTIC PERFORMANCE - PART 4: INTRINSIC CHARACTERISTICS - IN SITU VALUES OF SOUND DIFFRACTION
EN ISO 11202:2010 Acoustics - Noise emitted by machinery and equipment - Determination of emission sound pressure levels at a work station and at other specified positions applying approximate environmental corrections (ISO 11202:2010)
BS EN 61996-1:2013 Maritime navigation and radiocommunication equipment and systems. Shipborne voyage data recorder (VDR) Performance requirements, methods of testing and required test results
UNE-EN ISO 7779:2011 Acoustics - Measurement of airborne noise emitted by information technology and telecommunications equipment (ISO 7779:2010)
BS ISO 13474:2009 Acoustics. Framework for calculating a distribution of sound exposure levels for impulsive sound events for the purposes of environmental noise assessment
DIN ISO 13472-2:2010-12 Acoustics - Measurement of sound absorption properties of road surfaces in situ - Part 2: Spot method for reflective surfaces (ISO 13472-2:2010)
EN 61243-1:2005/A1:2010 LIVE WORKING - VOLTAGE DETECTORS - PART 1: CAPACITIVE TYPE TO BE USED FOR VOLTAGES EXCEEDING 1 KV A.C.
EN ISO 8041:2005/AC:2008 HUMAN RESPONSE TO VIBRATION - MEASURING INSTRUMENTATION
12/30264220 DC : 0 BS EN 60118-4 ED.3 - ELECTROACOUSTICS - HEARING AIDS - PART 4: INDUCTION LOOP SYSTEMS FOR HEARING AID PURPOSES - SYSTEM PERFORMANCE REQUIREMENTS
ISO 20233-1:2018 Ships and marine technology — Model test method for propeller cavitation noise evaluation in ship design — Part 1: Source level estimation
BS PAS 41(2003) : 2003 DIRECTIONAL SOUNDERS - REQUIREMENTS AND TESTS
09/30206924 DC : 0 BS EN 60118-15 ED.1 - ELECTROACOUSTICS - PART 15: HEARING AIDS - METHODS FOR CHARACTERISING SIGNAL PROCESSING IN HEARING AIDS
UNI ISO 1996-2 : 2010 ACOUSTICS - DESCRIPTION, MEASUREMENT AND ASSESSMENT OF ENVIRONMENTAL NOISE - PART 2: DETERMINATION OF ENVIRONMENTAL NOISE LEVELS
10/30218973 DC : DRAFT JUNE 2010 BS EN 1793-6 - ROAD TRAFFIC NOISE REDUCING DEVICES - TEST METHOD FOR DETERMINING THE ACOUSTIC PERFORMANCE - PART 6: INTRINSIC CHARACTERISTICS - IN SITU VALUES OF AIRBORNE SOUND INSULATION UNDER DIRECT SOUND FIELD CONDITIONS
BS ISO 13475-1:1999 Acoustics. Stationary audible warning devices used outdoors Field measurements for determination of sound emission quantities
NF EN ISO 13473-5 : 2010 CHARACTERIZATION OF PAVEMENT TEXTURE BY USE OF SURFACE PROFILES - PART 5: DETERMINATION OF MEGATEXTURE
PREN ISO 11200 : DRAFT 2012 ACOUSTICS - NOISE EMITTED BY MACHINERY AND EQUIPMENT - GUIDELINES FOR THE USE OF BASIC STANDARDS FOR THE DETERMINATION OF EMISSION SOUND PRESSURE LEVELS AT A WORK STATION AND AT OTHER SPECIFIED POSITIONS (ISO/DIS 11200:2012)
06/30114829 DC : DRAFT AUG 2006 ISO 13473-5 - CHARACTERISTICS OF PAVEMENT TEXTURE BY USING SURFACE PROFILES - PART 5: MEASUREMENT OF MEGATEXTURE
BS 7853:1996 Mechanical vibration. Road surface profiles. Reporting of measured data
ISO/PAS 17208-1:2012 Acoustics Quantities and procedures for description and measurement of underwater sound from ships Part 1: General requirements for measurements in deep water
DD ISO/TS 13473-4:2008 Characterization of pavement texture by use of surface profiles Spectral analysis of texture profiles
08/30184169 DC : DRAFT JUNE 2008 BS EN 61243-3 - LIVE WORKING - VOLTAGE DETECTORS - PART 3: TWO-POLE LOW-VOLTAGE TYPE
UNE-EN ISO 3382-1:2010 Acoustics - Measurement of room acoustic parameters - Part 1: Performance spaces (ISO 3382-1:2009)
ISO 21289:2008 Mechanical vibration and shock — Parameters to be specified for the acquisition of vibration data
ANSI S3.18 PT1 : 2002 MECHANICAL VIBRATION AND SHOCK - EVALUATION OF HUMAN EXPOSURE TO WHOLE-BODY VIBRATION - PART 1: GENERAL REQUIREMENTS
CSA C61400-11 : 2007 : R2012 WIND TURBINE GENERATOR SYSTEMS - PART 11: ACOUSTIC NOISE MEASUREMENT TECHNIQUES
I.S. EN 61265:1998 ELECTROACOUSTICS - INSTRUMENTS FOR MEASUREMENT OF AIRCRAFT NOISE - PERFORMANCE REQUIREMENTS FOR SYSTEMS TO MEASURE ONE-THIRD-OCTAVE BAND SOUND PRESSURE LEVELS IN NOISE CERTIFICATION OF TRANSPORT-CATEGORY AEROPLANES
EN ISO 10052:2004/A1:2010 ACOUSTICS - FIELD MEASUREMENTS OF AIRBORNE AND IMPACT SOUND INSULATION AND OF SERVICE EQUIPMENT SOUND - SURVEY METHOD
ANSI S1.42 : 2001 : R2006 DESIGN RESPONSE OF WEIGHTING NETWORKS FOR ACOUSTICAL MEASUREMENTS
ANSI S1.17-1 : 2014 MICROPHONE WINDSCREENS - PART 1: TEST PROCEDURES FOR MEASUREMENTS OF INSERTION LOSS IN STILL AIR
I.S. EN ISO 3095:2013 ACOUSTICS - RAILWAY APPLICATIONS - MEASUREMENT OF NOISE EMITTED BY RAILBOUND VEHICLES (ISO 3095:2013)
BS EN ISO 16283-1 : 2014 ACOUSTICS - FIELD MEASUREMENT OF SOUND INSULATION IN BUILDINGS AND OF BUILDING ELEMENTS - PART 1: AIRBORNE SOUND INSULATION
I.S. EN 61481-1:2014 LIVE WORKING - PHASE COMPARATORS - PART 1: CAPACITIVE TYPE TO BE USED FOR VOLTAGES EXCEEDING 1 KV A.C.
UNI EN ISO 7779 : 2010 ACOUSTICS - MEASUREMENT OF AIRBORNE NOISE EMITTED BY INFORMATION TECHNOLOGY AND TELECOMMUNICATIONS EQUIPMENT
ISO 2969:2015 Cinematography — B-chain electro-acoustic reponse of motion-picture control rooms and indoor theatres — Specifications and measurements
I.S. EN ISO 3382-1:2009 ACOUSTICS - MEASUREMENT OF ROOM ACOUSTIC PARAMETERS - PART 1: PERFORMANCE SPACES
ANSI S2.72 PT1 : 2002 : INC : AMD 1 : 2010 : R200700 MECHANICAL VIBRATION AND SHOCK - EVALUATION OF HUMAN EXPOSURE TO WHOLE-BODY VIBRATION - PART 1: GENERAL REQUIREMENTS
SAE J2834 : 2019 RIDE INDEX STRUCTURE AND DEVELOPMENT METHODOLOGY
I.S. EN 15461:2008 RAILWAY APPLICATIONS - NOISE EMISSION - CHARACTERISATION OF THE DYNAMIC PROPERTIES OF TRACK SECTIONS FOR PASS BY NOISE MEASUREMENTS
I.S. EN ISO 10140-5:2010 ACOUSTICS - LABORATORY MEASUREMENT OF SOUND INSULATION OF BUILDING ELEMENTS - PART 5: REQUIREMENTS FOR TEST FACILITIES AND EQUIPMENT (ISO 10140-5:2010)
ISO 8579-1:2002 Acceptance code for gear units — Part 1: Test code for airborne sound
EN 61400-11:2013 Wind turbines - Part 11: Acoustic noise measurement techniques
DIN EN ISO 10052:2010-10 Acoustics - Field measurements of airborne and impact sound insulation and of service equipment sound - Survey method (ISO 10052:2004 + Amd 1:2010) (includes Amendment A1:2010)
DIN EN ISO 11200:2014-10 ACOUSTICS - NOISE EMITTED BY MACHINERY AND EQUIPMENT - GUIDELINES FOR THE USE OF BASIC STANDARDS FOR THE DETERMINATION OF EMISSION SOUND PRESSURE LEVELS AT A WORK STATION AND AT OTHER SPECIFIED POSITIONS (ISO 11200:2014)
BS EN ISO 3741:2009 Acoustics. Determination of sound power levels of noise sources using sound pressure. Precision methods for reverberation rooms
BS EN ISO 8041:2005 Human response to vibration. Measuring instrumentation
BS EN ISO 8253-3:2012 Acoustics. Audiometric test methods Speech audiometry
UNE-EN ISO 11200:2014 Acoustics - Noise emitted by machinery and equipment - Guidelines for the use of basic standards for the determination of emission sound pressure levels at a work station and at other specified positions (ISO 11200:2014)
UNE-ISO 2631-2:2011 Mechanical vibration and shock -- Evaluation of human exposure to whole-body vibration -- Part 2: Vibration in buildings (1 Hz to 80 Hz)
BS EN 13141-2:2010 Ventilation for buildings. Performance testing of components/products for residential ventilation Exhaust and supply air terminal devices
BS EN ISO 11691:1997 Acoustics. Measurement of insertion loss of ducted silencers without flow. Laboratory survey method
BS EN ISO 15006:2011 Road vehicles. Ergonomic aspects of transport information and control systems. Specifications for in-vehicle auditory presentation
ISO 11904-2:2004 Acoustics Determination of sound immission from sound sources placed close to the ear Part 2: Technique using a manikin
BS EN ISO 3382:2000 Acoustics. Measurement of the reverberation time of rooms with reference to other acoustical parameters
ISO 11203:1995 Acoustics — Noise emitted by machinery and equipment — Determination of emission sound pressure levels at a work station and at other specified positions from the sound power level
BS EN ISO 140-18:2006 Acoustics. Measurement of sound insulation in buildings and of building elements Laboratory measurement of sound generated by rainfall on building elements
BS EN ISO 11957:2009 Acoustics. Determination of sound insulation performance of cabins. Laboratory and in situ measurements
BS EN ISO 7731:2008 Ergonomics. Danger signals for public and work areas. Auditory danger signals
BS EN ISO 8253-1:2010 Acoustics. Audiometric test methods Pure-tone air and bone conduction audiometry
BS EN ISO 11201:2010 Acoustics. Noise emitted by machinery and equipment. Determination of emission sound pressure levels at a work station and at other specified positions in an essentially free field over a reflecting plane with negligible environmental corrections
BS EN ISO 11904-1:2002 Acoustics. Determination of sound immission from sound sources placed close to the ear. Technique using a microphone in a real ear (MIRE technique)
BS EN ISO 4869-3:2007 Acoustics. Hearing protectors Measurement of insertion loss of ear-muff type protectors using an acoustic test fixture
BS EN ISO 3745 : 2012 ACOUSTICS - DETERMINATION OF SOUND POWER LEVELS AND SOUND ENERGY LEVELS OF NOISE SOURCES USING SOUND PRESSURE - PRECISION METHODS FOR ANECHOIC ROOMS AND HEMI-ANECHOIC ROOMS
I.S. EN ISO 11691:2009 ACOUSTICS - MEASUREMENT OF INSERTION LOSS OF DUCTED SILENCERS WITHOUT FLOW - LABORATORY SURVEY METHOD
I.S. EN ISO 4871:2009 ACOUSTICS - DECLARATION AND VERIFICATION OF NOISE EMISSION VALUES OF MACHINERY AND EQUIPMENT
DIN EN 15433-4:2008-02 Transportation loads - Measurement and evaluation of dynamic mechanical loads - Part 4: Data evaluation
DIN EN ISO 11957:2010-01 Acoustics - Determination of sound insulation performance of cabins - Laboratory and in situ measurements (ISO 11957:1996)
DIN EN ISO 354:2003-12 ACOUSTICS - MEASUREMENT OF SOUND ABSORPTION IN A REVERBERATION ROOM
EN 61265:1995 Electroacoustics - Instruments for measurement of aircraft noise - Performance requirements for systems to measure one-third-octave band sound pressure levels in noise certification of transport-category aeroplanes
EN 61243-3:2014/AC:2015 LIVE WORKING - VOLTAGE DETECTORS - PART 3: TWO-POLE LOW-VOLTAGE TYPE
I.S. EN ISO 11904-2:2004 ACOUSTICS - DETERMINATION OF SOUND IMMISSION FROM SOUND SOURCES PLACED CLOSE TO THE EAR - PART 2: TECHNIQUE USING A MANIKIN
NF EN ISO 11691 : 2009 ACOUSTICS - MEASUREMENT OF INSERTION LOSS OF DUCTED SILENCERS WITHOUT FLOW - LABORATORY SURVEY METHOD
EN 62585 : 2012 ELECTROACOUSTICS - METHODS TO DETERMINE CORRECTIONS TO OBTAIN THE FREE-FIELD RESPONSE OF A SOUND LEVEL METER (IEC 62585:2012)
DIN EN ISO 8041:2006-06 HUMAN RESPONSE TO VIBRATION - MEASURING INSTRUMENTATION
EN 60704-1:2010/A11:2012 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - TEST CODE FOR THE DETERMINATION OF AIRBORNE NOISE - PART 1: GENERAL REQUIREMENTS (IEC 60704-1:2010)
DIN EN ISO 11691:2010-01 Acoustics - Measurement of insertion loss of ducted silencers without flow - Laboratory survey method (ISO 11691:1995); German version EN ISO 11691:2009
DIN ISO 230-5:2006-03 Test code for machine tools - Part 5: Determination of the noise emission (ISO 230-5:2000)
DIN EN ISO 140-18:2007-02 ACOUSTICS - MEASUREMENT OF SOUND INSULATION IN BUILDINGS AND OF BUILDING ELEMENTS - PART 18: LABORATORY MEASUREMENT OF SOUND GENERATED BY RAINFALL ON BUILDING ELEMENTS
EN 13141-2:2010 Ventilation for buildings - Performance testing of components/products for residential ventilation - Part 2: Exhaust and supply air terminal devices
EN ISO 11904-2 : 2004 ACOUSTICS - DETERMINATION OF SOUND IMMISSION FROM SOUND SOURCES PLACED CLOSE TO THE EAR - PART 2: TECHNIQUE USING A MANIKIN
EN 61996-2:2008 Maritime navigation and radiocommunication equipment and systems - Shipborne voyage data recorder (VDR) - Part 2: Simplified voyage data recorder (S-VDR) - Performance requirements, methods of testing and required test results
NF EN ISO 11904-2 : 2005 ACOUSTICS - DETERMINATION OF SOUND IMMISSIONS FROM SOUND SOURCES PLACED CLOSE TO THE EAR - PART 2: TECHNIQUE USING A MANIKIN (MANIKIN-TECHNIQUE)
DIN EN ISO 4871:2009-11 Acoustics - Declaration and verification of noise emission values of machinery and equipment (ISO 4871:1996)
EN 50332-2:2013 Sound system equipment: Headphones and earphones associated with personal music players - Maximum sound pressure level measurement methodology - Part 2: Matching of sets with headphones if either or both are offered separately, or are offered as one package equipment but with standardised connectors between the two allowing to combine components of different manufacturers or different design
EN 300 176-2 : 2.2.1 DIGITAL ENHANCED CORDLESS TELECOMMUNICATIONS (DECT); TEST SPECIFICATION; PART 2: AUDIO AND SPEECH
EN 61481-1:2014 Live working - Phase comparators - Part 1: Capacitive type to be used for voltages exceeding 1 kV a.c.
EN 60315-4:1998 Methods of measurement on radio receivers for various classes of emission - Part 4: Receivers for frequency-modulated sound broadcasting emissions
EN 12215:2004+A1:2009 Coating plants - Spray booths for application of organic liquid coating materials - Safety requirements
EN ISO 5349-1 : 2001 MECHANICAL VIBRATION - MEASUREMENT AND EVALUATION OF HUMAN EXPOSURE TO HAND-TRANSMITTED VIBRATION - PART 1: GENERAL REQUIREMENTS (ISO 5349-1:2001)
EN 60118-15:2012 Electroacoustics - Hearing aids - Part 15: Methods for characterising signal processing in hearing aids with a speech-like signal
BS EN ISO 7235:2009 Acoustics. Laboratory measurement procedures for ducted silencers and air-terminal units. Insertion loss, flow noise and total pressure loss
EN ISO 16251-1:2014 Acoustics - Laboratory measurement of the reduction of transmitted impact noise by floor coverings on a small floor mock-up - Part 1: Heavyweight compact floor (ISO 16251-1:2014)
BS EN ISO 354:2003 Acoustics. Measurement of sound absorption in a reverberation room
I.S. EN ISO 11819-1:2002 ACOUSTICS - MEASUREMENT OF THE INFLUENCE OF ROAD SURFACES ON TRAFFIC NOISE - PART 1: STATISTICAL PASS-BY METHOD
EN ISO 16283-2:2015 Acoustics - Field measurement of sound insulation in buildings and of building elements - Part 2: Impact sound insulation (ISO 16283-2:2015)
10/30197204 DC : 0 BS ISO 26101 - ACOUSTICS - TEST METHODS FOR THE QUALIFICATION OF FREE-FIELD ENVIRONMENTS
TS 103 334 : 1.1.1 SPEECH AND MULTIMEDIA TRANSMISSION QUALITY (STQ); TRANSMISSION REQUIREMENTS FOR WEARABLE WIRELESS TERMINALS FROM A QOS PERSPECTIVE AS PERCEIVED BY THE USER
CEI EN 61996-1 : 2014 MARITIME NAVIGATION AND RADIOCOMMUNICATION EQUIPMENT AND SYSTEMS - SHIPBORNE VOYAGE DATA RECORDER (VDR) - PART 1: VOYAGE DATA RECORDER (VDR) - PERFORMANCE REQUIREMENTS, METHODS OF TESTING AND REQUIRED TEST RESULTS
14/30298593 DC : 0 BS EN 1793-4 - ROAD TRAFFIC NOISE REDUCING DEVICES - TEST METHOD FOR DETERMINING THE ACOUSTIC PERFORMANCE - PART 4: INTRINSIC CHARACTERISTICS - IN SITU VALUES OF SOUND DIFFRACTION
ISO 3740:2000 Acoustics Determination of sound power levels of noise sources Guidelines for the use of basic standards
13/30279964 DC : 0 BS EN ISO 3743-2:1994/AMD 1 - ACOUSTICS - DETERMINATION OF SOUND POWER LEVELS OF NOISE SOURCES USING SOUND PRESSURE - ENGINEERING METHODS FOR SMALL, MOVABLE SOURCES IN REVERBERANT FIELDS - PART 2: METHODS FOR SPECIAL REVERBERATION TEST ROOMS
ANSI S12.57 : 2011 ACOUSTICS - DETERMINATION OF SOUND POWER LEVELS AND SOUND ENERGY LEVELS OF NOISE SOURCES USING SOUND PRESSURE - ENGINEERING/SURVEY METHODS FOR USE IN SITU IN A REVERBERANT ENVIRONMENT
99/710387 DC : DRAFT JUN 99 EN ISO 15744 - HAND-HELD NON-ELECTRIC POWER TOOLS - NOISE MEASUREMENT CODE - ENGINEERING METHOD (GRADE 2)
I.S. EN ISO 7779:2010 ACOUSTICS - MEASUREMENT OF AIRBORNE NOISE EMITTED BY INFORMATION TECHNOLOGY AND TELECOMMUNICATIONS EQUIPMENT
I.S. EN 61996-1:2013-2015-10 MARITIME NAVIGATION AND RADIOCOMMUNICATION EQUIPMENT AND SYSTEMS - SHIPBORNE VOYAGE DATA RECORDER (VDR) - PART 1: PERFORMANCE REQUIREMENTS, METHODS OF TESTING AND REQUIRED TEST RESULTS (IEC 61996-1:2013 (EQV))
11/30229157 DC : 0 BS ISO 17497-2 - ACOUSTICS - SOUND-SCATTERING PROPERTIES OF SURFACES - PART 2: MEASUREMENT OF THE DIRECTIONAL DIFFUSION COEFFICIENT IN A FREE FIELD
UNE-EN 16272-4:2017 Railway applications - Track - Noise barriers and related devices acting on airborne sound propagation - Test method for determining the acoustic performance - Part 4: Intrinsic characteristics - In situ values of sound diffraction under direct sound field
13/30269186 DC : 0 BS EN ISO 16283-2 - ACOUSTICS - FIELD MEASUREMENT OF SOUND INSULATION IN BUILDINGS AND OF BUILDING ELEMENTS - PART 2: IMPACT SOUND INSULATION
BS ISO 13473-2:2002 Characterization of pavement texture by use of surface profiles Terminology and basic requirements related to pavement texture profile analysis
I.S. EN ISO 16251-1:2014 ACOUSTICS - LABORATORY MEASUREMENT OF THE REDUCTION OF TRANSMITTED IMPACT NOISE BY FLOOR COVERINGS ON A SMALL FLOOR MOCK-UP - PART 1: HEAVYWEIGHT COMPACT FLOOR (ISO 16251-1:2014)
07/30081117 DC : 0 BS EN ISO 3382-1 - ACOUSTICS - MEASUREMENT OF ROOM ACOUSTIC PARAMETERS - PART 1: PERFORMANCE ROOMS
04/301307 DC : DRAFT JAN 2004 IEC 60118-4 ED.2 - HEARING AIDS - PART 4: INDUCTION LOOP SYSTEMS FOR HEARING AID PURPOSES - MAGNETIC FIELD STRENGTH
BS ISO 9611:1996 Acoustics. Characterization of sources of structure-borne sound with respect to sound radiation from connected structures. Measurement of velocity at the contact points of machinery when resiliently mounted
03/108242 DC : DRAFT JUNE 2003 BS ISO 1996 - ACOUSTICS - DESCRIPTION, ASSESSMENT AND MEASUREMENT OF ENVIRONMENTAL NOISE - PART 2: DETERMINATION OF ENVIRONMENTAL NOISE LEVELS
13/30267625 DC : 0 BS EN 61481-2 ED 1.0 - LIVE WORKING - PHASE COMPARATORS - PART 2: RESISTIVE TYPE TO BE USED FOR VOLTAGES FROM 1 KV TO 36 KV A.C
I.S. EN ISO 140-11:2005 ACOUSTICS - MEASUREMENT OF SOUND INSULATION IN BUILDINGS AND OF BUILDING ELEMENTS - PART 11: LABORATORY MEASUREMENTS OF THE REDUCTION OF TRANSMITTED IMPACT SOUND BY FLOOR COVERINGS ON LIGHTWEIGHT REFERENCE FLOORS
BS ISO 10302-2:2011 Acoustics. Measurement of airborne noise emitted and structure-borne vibration induced by small air-moving devices Structure-borne vibration measurements
DIN EN 15461 E : 2011 RAILWAY APPLICATIONS - NOISE EMISSION - CHARACTERISATION OF THE DYNAMIC PROPERTIES OF TRACK SECTIONS FOR PASS BY NOISE MEASUREMENTS
08/30177421 DC : DRAFT AUG 2008 BS ISO 10302-2 - ACOUSTICS - MEASUREMENT OF AIRBORNE NOISE EMITTED AND STRUCTURE-BORNE VIBRATION INDUCED BY SMALL AIR MOVING DEVICES - PART 2: STRUCTURE-BORNE VIBRATION MEASUREMENTS
10/30213857 DC : 0 BS ISO 8253-3 - ACOUSTICS - AUDIOMETRIC TEST METHODS - PART 3: SPEECH AUDIOMETRY
BS EN 60349-4:2013 Electric traction. Rotating electrical machines for rail and road vehicles Permanent magnet synchronous electrical machines connected to an electronic converter
11/30216799 DC : 0 BS ISO 532-1 - ACOUSTICS - METHOD FOR CALCULATING LOUDNESS - PART 1: STATIONARY SOUNDS
CEI EN 61043 : 1998 ELECTROACOUSTICS - INSTRUMENTS FOR THE MEASUREMENT OF SOUND INTENSITY - MEASUREMENTS WITH PAIRS OF PRESSURE SENSING MICROPHONES
DIN EN ISO 11201:2010-10 Acoustics - Noise emitted by machinery and equipment - Determination of emission sound pressure levels at a work station and at other specified positions in an essentially free field over a reflecting plane with negligible environmental corrections (ISO 11201:2010)
BS EN 61996:2001 Maritime navigation and radiocommunication equipment and systems. Shipborne voyage data recorder (VDR). Performance requirements. Methods of testing and required test results
13/30281665 DC : 0 BS EN 50332-2 - SOUND SYSTEM EQUIPMENT: HEADPHONES AND EARPHONES ASSOCIATED WITH PORTABLE AUDIO EQUIPMENT - MAXIMUM SOUND PRESSURE LEVEL MEASUREMENT METHODOLOGY AND LIMIT CONSIDERATIONS - PART 2: MATCHING OF SETS WITH HEADPHONES IF EITHER OR BOTH ARE OFFERED SEPARATELY
BS ISO 11819-1 : 97 AMD 13621 ACOUSTICS - MEASUREMENT OF THE INFLUENCE OF ROAD SURFACES ON TRAFFIC NOISE - PART 1 - STATISTICAL PASS-BY METHOD
I.S. EN 60118-15:2012 ELECTROACOUSTICS - HEARING AIDS - PART 15: METHODS FOR CHARACTERISING SIGNAL PROCESSING IN HEARING AIDS WITH A SPEECH-LIKE SIGNAL (IEC 60118-15:2012 (EQV))
PD ISO/TS 19425:2015 Reciprocating internal combustion engines. Measurement method for air cleaners. Sound power level of combustion air inlet noise and insertion loss using sound pressure
S.R. CEN/TS 16272-5:2014 RAILWAY APPLICATIONS - TRACK - NOISE BARRIERS AND RELATED DEVICES ACTING ON AIRBORNE SOUND PROPAGATION - TEST METHOD FOR DETERMINING THE ACOUSTIC PERFORMANCE - PART 5: INTRINSIC CHARACTERISTICS - IN SITU VALUES OF SOUND REFLECTION UNDER DIRECT SOUND FIELD CONDITIONS
DIN ISO 2954:2012-10 Mechanical vibration of rotating and reciprocating machinery - Requirements for instruments for measuring vibration severity (ISO 2954:2012)
UNE-EN ISO 16283-3:2016 Acoustics - Field measurement of sound insulation in buildings and of building elements - Part 3: Façade sound insulation (ISO 16283-3:2016)
BS ISO 2631-1:1997 Mechanical vibration and shock. Evaluation of human exposure to whole-body vibration General Requirements
BS EN 61481-2:2014 Live working. Phase comparators Resistive type to be used for voltages from 1 kV to 36 kV a.c.
08/30175518 DC : DRAFT SEP 2008 BS EN 13141-2 - VENTILATION FOR BUILDINGS - PERFORMANCE TESTING OF COMPONENTS/PRODUCTS FOR RESIDENTIAL VENTILATION - PART 2: EXHAUST AND SUPPLY AIR TERMINAL DEVICES
BS 848-2.5(2003) : 2003 ACOUSTICS - DETERMINATION OF SOUND POWER RADIATED INTO A DUCT BY FANS AND OTHER AIR-MOVING DEVICES - IN-DUCT METHOD
15/30297373 DC : 0 BS EN ISO 4869-1 - ACOUSTICS - HEARING PROTECTORS - PART 1: SUBJECTIVE METHOD FOR THE ASUREMENT OF SOUND ATTENUATION
BS ISO 13472-2:2010 Acoustics. Measurement of sound absorption properties of road surfaces in situ Spot method for reflective surfaces
DIN ISO 13472-1:2004-04 Acoustics - Measurement of sound absorption properties of road surfaces in situ - Part 1: Extended surface method (ISO 13472-1:2002)
BS EN ISO 16251-1:2014 Acoustics. Laboratory measurement of the reduction of transmitted impact noise by floor coverings on a small floor mock-up Heavyweight compact floor
DIN EN 54-24 E : 2008 FIRE DETECTION AND FIRE ALARM SYSTEMS - PART 24: COMPONENTS OF VOICE ALARM SYSTEMS - LOUDSPEAKERS
07/30135701 DC : 0 BS IEC 61996-1 - MARITIME NAVIGATION AND RADIOCOMMUNICATION EQUIPMENT AND SYSTEMS - SHIPBORNE VOYAGE DATA RECORDER (VDR) - PART 1: PERFORMANCE REQUIREMENTS - METHODS OF TESTING AND REQUIRED TEST RESULTS
BS ISO 17497-1 : 2004 ACOUSTICS - SOUND-SCATTERING PROPERTIES OF SURFACES - PART 1: MEASUREMENT OF THE RANDOM-INCIDENCE SCATTERING COEFFICIENT IN A REVERBERATION ROOM
BS EN 60315-4:1998 Methods of measurement on radio receivers for various classes of emission Receivers for frequency-modulated sound broadcasting emissions
PD CEN/TS 16272-7:2015 Railway applications. Track. Noise barriers and related devices acting on airborne sound propagation. Test method for determining the acoustic performance Extrinsic characteristics. In situ values of insertion loss
07/30094858 DC : 0 BS ISO 3747 - ACOUSTICS - DETERMINATION OF SOUND POWER LEVELS AND SOUND ENERGY LEVELS OF NOISE SOURCES USING SOUND PRESSURE - ENGINEERING/SURVEY METHODS FOR USE IN SITU IN A REVERBERANT ENVIRONMENT
BS EN ISO 3382-1:2009 Acoustics. Measurement of room acoustic parameters Performance spaces
CEI EN 60268-16 : 2012 SOUND SYSTEM EQUIPMENT - PART 16: OBJECTIVE RATING OF SPEECH INTELLIGIBILITY BY SPEECH TRANSMISSION INDEX
BS EN 61606-3:2008 Audio and audiovisual equipment. Digital audio parts. Basic measurement methods of audio characteristics Professional use
I.S. EN 16272-4:2016 RAILWAY APPLICATIONS - TRACK - NOISE BARRIERS AND RELATED DEVICES ACTING ON AIRBORNE SOUND PROPAGATION - TEST METHOD FOR DETERMINING THE ACOUSTIC PERFORMANCE - PART 4: INTRINSIC CHARACTERISTICS - IN SITU VALUES OF SOUND DIFFRACTION UNDER DIRECT SOUND FIELD
BS ISO 230-5:2000 Test code for machine tools Determination of the noise emission
ANSI S12.53/1 : 2011 ACOUSTICS - DETERMINATION OF SOUND POWER LEVELS AND SOUND ENERGY LEVELS OF NOISE SOURCES USING SOUND PRESSURE - ENGINEERING METHODS FOR SMALL MOVABLE SOURCES IN REVERBERANT FIELDS - PART 1: COMPARISON METHOD FOR A HARD-WALLED TEST ROOM
17/30359986 DC : 0 BS EN ISO 7779 - ACOUSTICS - MEASUREMENT OF AIRBORNE NOISE EMITTED BY INFORMATION TECHNOLOGY AND TELECOMMUNICATIONS EQUIPMENT
ANSI S12.10:2002(R2007) ACOUSTICS - MEASUREMENT OF AIRBORNE NOISE EMITTED BY INFORMATION TECHNOLOGY AND TELECOMMUNICATIONS EQUIPMENT
BS EN ISO 10140-3 : 2010 ACOUSTICS - LABORATORY MEASUREMENT OF SOUND INSULATION OF BUILDING ELEMENTS - PART 3: MEASUREMENT OF IMPACT SOUND INSULATION
CSA C61400-11 : 2007 WIND TURBINE GENERATOR SYSTEMS - PART 11: ACOUSTIC NOISE MEASUREMENT TECHNIQUES
DIN EN ISO 16283-2 E : 2016 ACOUSTICS - FIELD MEASUREMENT OF SOUND INSULATION IN BUILDINGS AND OF BUILDING ELEMENTS - PART 2: IMPACT SOUND INSULATION (ISO 16283-2:2015)
IEC 60534-8-1:2005 Industrial-process control valves - Part 8-1: Noise considerations - Laboratory measurement of noise generated by aerodynamic flow through control valves
NF EN ISO 24501 : 2011 ERGONOMICS - ACCESSIBLE DESIGN - SOUND PRESSURE LEVELS OF AUDITORY SIGNALS FOR CONSUMER PRODUCTS
BS EN 61243-3:2014 Live working. Voltage detectors Two-pole low-voltage type
AASHTO TP 76 : 2015 METHOD OF TEST FOR MEASUREMENT OF TIRE/PAVEMENT NOISE USING THE ON-BOARD SOUND INTENSITY (OBSI) METHOD
IEC 61243-1:2003+AMD1:2009 CSV Live working - Voltage detectors - Part 1: Capacitive type to be used for voltages exceeding 1 kV a.c.
UNE-EN 62520:2012 Railway applications - Electric traction - Short-primary type linear induction motors (LIM) fed by power converters
I.S. EN 62585:2012 ELECTROACOUSTICS - METHODS TO DETERMINE CORRECTIONS TO OBTAIN THE FREE-FIELD RESPONSE OF A SOUND LEVEL METER (IEC 62585:2012 (EQV))
ANSI S2.72 PT4 : 2003 : R2007 MECHANICAL VIBRATION AND SHOCK - EVALUATION OF HUMAN EXPOSURE TO WHOLE-BODY VIBRATION - PART 4: GUIDELINES FOR THE EVALUATION OF THE EFFECTS OF VIBRATION AND ROTATIONAL MOTION ON PASSENGER AND CREW COMFORT IN FIXED-GUIDEWAY TRANSPORT SYSTEMS
CSA ISO 10819 : 2016 MECHANICAL VIBRATION AND SHOCK - HAND-ARM VIBRATION - MEASUREMENT AND EVALUATION OF THE VIBRATION TRANSMISSIBILITY OF GLOVES AT THE PALM OF THE HAND
S.R. CEN/TR 15068:2009 GAS WELDING EQUIPMENT - MEASUREMENT OF NOISE EMITTED BY BLOWPIPE FOR WELDING, CUTTING, HEATING, BRAZING AND SOLDERING - MEASUREMENT METHOD
ANSI/ASA S12.54/ISO 3744 : 2011(R2016) ACOUSTICS - DETERMINATION OF SOUND POWER LEVELS AND SOUND ENERGY LEVELS OF NOISE SOURCES USING SOUND PRESSURE - ENGINEERING METHODS FOR AN ESSENTIALLY FREE FIELD OVER A REFLECTING PLANE
BS EN 15461 : 2008 RAILWAY APPLICATIONS - NOISE EMISSION - CHARACTERISATION OF THE DYNAMIC PROPERTIES OF TRACK SECTIONS FOR PASS BY NOISE MEASUREMENTS
I.S. EN 1793-4:2015 ROAD TRAFFIC NOISE REDUCING DEVICES - TEST METHOD FOR DETERMINING THE ACOUSTIC PERFORMANCE - PART 4: INTRINSIC CHARACTERISTICS - IN SITU VALUES OF SOUND DIFFRACTION
BS ISO 2631-4 : 2001 MECHANICAL VIBRATION AND SHOCK - EVALUATION OF HUMAN EXPOSURE TO WHOLE-BODY VIBRATION - PART 4: GUIDELINES FOR THE EVALUATION OF THE EFFECTS OF VIBRATION AND ROTATIONAL MOTION ON PASSENGERS AND CREW COMFORT IN FIXED-GUIDEWAY TRANSPORT SYSTEMS
I.S. EN 1793-6:2012 ROAD TRAFFIC NOISE REDUCING DEVICES - TEST METHOD FOR DETERMINING THE ACOUSTIC PERFORMANCE - PART 6: INTRINSIC CHARACTERISTICS - IN SITU VALUES OF AIRBORNE SOUND INSULATION UNDER DIRECT SOUND FIELD CONDITIONS
BS EN 60268-5 : 2003 SOUND SYSTEM EQUIPMENT - PART 5: LOUDSPEAKERS
I.S. EN ISO 13473-5:2009 CHARACTERIZATION OF PAVEMENT TEXTURE BY USE OF SURFACE PROFILES - PART 5: DETERMINATION OF MEGATEXTURE
AASHTO TP 99 : 2013 METHOD OF TEST FOR DETERMINING THE INFLUENCE OF ROAD SURFACES ON TRAFFIC NOISE USING THE CONTINUOUS-FLOW TRAFFIC TIME-INTEGRATED METHOD (CTIM)
ISO 13472-2:2010 Acoustics Measurement of sound absorption properties of road surfaces in situ Part 2: Spot method for reflective surfaces
AASHTO TP 98 : 2013 METHOD OF TEST FOR DETERMINING THE INFLUENCE OF ROAD SURFACES ON VEHICLE NOISE USING THE STATISTICAL ISOLATED PASS-BY (SIP) METHOD
PREN ISO 10819 : DRAFT 2011 MECHANICAL VIBRATION AND SHOCK - HAND-ARM VIBRATION - METHOD FOR THE MEASUREMENT AND EVALUATION OF THE VIBRATION TRANSMISSIBILITY OF GLOVES AT THE PALM OF THE HAND (ISO/DIS 10819:2011)
I.S. EN ISO 10052:2005 ACOUSTICS - FIELD MEASUREMENTS OF AIRBORNE AND IMPACT SOUND INSULATION AND OF SERVICE EQUIPMENT SOUND - SURVEY METHOD
CEI EN 60349-1 : 2012 ELECTRIC TRACTION - ROTATING ELECTRICAL MACHINES FOR RAIL AND ROAD VEHICLES - PART 1: MACHINES OTHER THAN ELECTRONIC CONVERTER-FED ALTERNATING CURRENT MOTORS
AASHTO TP 99 : 2013 : R2015 METHOD OF TEST FOR DETERMINING THE INFLUENCE OF ROAD SURFACES ON TRAFFIC NOISE USING THE CONTINUOUS-FLOW TRAFFIC TIME-INTEGRATED METHOD (CTIM)
ISO/TS 4869-5:2006 Acoustics — Hearing protectors — Part 5: Method for estimation of noise reduction using fitting by inexperienced test subjects
ANSI S12.62 : 2012(R2017) ACOUSTICS - ATTENUATION OF SOUND DURING PROPAGATION OUTDOORS - PART 2: GENERAL METHOD OF CALCULATION
I.S. EN 61481-2:2014 LIVE WORKING - PHASE COMPARATORS - PART 2: RESISTIVE TYPE TO BE USED FOR VOLTAGES FROM 1 KV TO 36 KV A.C.
NF EN 61400-11 : 2004 AMD 1 2006 WIND TURBINE GENERATOR SYSTEMS - PART 11: ACOUSTIC NOISE MEASUREMENT TECHNIQUES
I.S. EN ISO 10140-3:2010 ACOUSTICS - LABORATORY MEASUREMENT OF SOUND INSULATION OF BUILDING ELEMENTS - PART 3: MEASUREMENT OF IMPACT SOUND INSULATION (ISO 10140-3:2010)
UNE-EN ISO 16283-2:2016 Acoustics - Field measurement of sound insulation in buildings and of building elements - Part 2: Impact sound insulation (ISO 16283-2:2015)
ANSI S3.18 PT4 : 2003 MECHANICAL VIBRATION AND SHOCK - EVALUATION OF HUMAN EXPOSURE TO WHOLE BODY VIBRATION - PART 4: GUIDELINES FOR THE EVALUATION OF THE EFFECTS OF VIBRATION AND ROTATIONAL MOTION ON PASSENGER AND CREW COMFORT IN FIXED-GUIDEWAY TRANSPORT SYSTEMS
ANSI S3.18 : 1979 GUIDE FOR THE EVALUATION OF HUMAN EXPOSURE TO WHOLE-BODY VIBRATION
ISO 17201-1:2005 Acoustics Noise from shooting ranges Part 1: Determination of muzzle blast by measurement
EN ISO 3740:2000 ACOUSTICS - DETERMINATION OF SOUND POWER LEVELS OF NOISE SOURCES - GUIDELINES FOR THE USE OF BASIC STANDARDS
BS EN ISO 3740:2001 Acoustics. Determination of sound power levels of noise sources. Guidelines for the use of basic standards
NF EN 61243-1 : 2005 AMD 1 2010 LIVE WORKING - VOLTAGE DETECTORS - PART 1: CAPACITIVE TYPE TO BE USED FOR VOLTAGES EXCEEDING 1 KV A.C.
DIN EN 12215:2010-06 COATING PLANTS - SPRAY BOOTHS FOR APPLICATION OF ORGANIC LIQUID COATING MATERIALS - SAFETY REQUIREMENTS
DIN EN ISO 8253-3 E : 2012 ACOUSTICS - AUDIOMETRIC TEST METHODS - PART 3: SPEECH AUDIOMETRY (ISO 8253-3:2012)
DIN EN 12981:2010-06 COATING PLANTS - SPRAY BOOTHS FOR APPLICATION OF ORGANIC POWDER COATING MATERIAL - SAFETY REQUIREMENTS
BS EN ISO 140-6:1998 Acoustics. Measurement of sound insulation in buildings and of building elements Laboratory measurements of impact sound insulation of floors
ISO 4871:1996 Acoustics — Declaration and verification of noise emission values of machinery and equipment
ISO 5136:2003 Acoustics — Determination of sound power radiated into a duct by fans and other air-moving devices — In-duct method
IEC 60349-2:2010 Electric traction - Rotating electrical machines for rail and road vehicles - Part 2: Electronic converter-fed alternating current motors
BS ISO 14837-1:2005 Mechanical vibration. Ground-borne noise and vibration arising from rail systems General guidance
BS EN ISO 11546-1:1996 Acoustics. Determination of sound insulation performances of enclosures Measurements under laboratory conditions (for declaration purposes)
BS EN ISO 3744:2010 Acoustics. Determination of sound power levels and sound energy levels of noise sources using sound pressure. Engineering methods for an essentially free field over a reflecting plane
BS EN ISO 14257:2001 Acoustics. Measurement and parametric description of spatial sound distribution curves in workrooms for evaluation of their acoustical performance
DIN EN ISO 8253-3:2012-08 Acoustics - Audiometric test methods - Part 3: Speech audiometry (ISO 8253-3:2012)
EN 60065:2014/AC:2017-01 AUDIO, VIDEO AND SIMILAR ELECTRONIC APPARATUS - SAFETY REQUIREMENTS (IEC 60065:2014/COR2:2016)
ECMA 275 : 3ED 2015 MEASUREMENT OF STRUCTURE-BORNE VIBRATION INDUCED BY SMALL AIR MOVING DEVICES
I.S. EN 12215:2004 COATING PLANTS - SPRAY BOOTHS FOR APPLICATION OF ORGANIC LIQUID COATING MATERIALS - SAFETY REQUIREMENTS
I.S. EN ISO 3381:2011 RAILWAY APPLICATIONS - ACOUSTICS - MEASUREMENT OF NOISE INSIDE RAILBOUND VEHICLES
I.S. EN ISO 8253-3:2012 ACOUSTICS - AUDIOMETRIC TEST METHODS - PART 3: SPEECH AUDIOMETRY (ISO 8253-3:2012)
I.S. EN ISO 11957:2009 ACOUSTICS - DETERMINATION OF SOUND INSULATION PERFORMANCE OF CABINS - LABORATORY AND IN SITU MEASUREMENTS
I.S. EN ISO 3747:2010 ACOUSTICS - DETERMINATION OF SOUND POWER LEVELS AND SOUND ENERGY LEVELS OF NOISE SOURCES USING SOUND PRESSURE - ENGINEERING/SURVEY METHODS FOR USE IN SITU IN A REVERBERANT ENVIRONMENT
I.S. EN ISO 5136:2009 ACOUSTICS - DETERMINATION OF SOUND POWER RADIATED INTO A DUCT BY FANS AND OTHER AIR-MOVING DEVICES - IN-DUCT METHOD
I.S. EN ISO 7235:2009 ACOUSTICS - LABORATORY MEASUREMENT PROCEDURES FOR DUCTED SILENCERS AND AIR-TERMINAL UNITS - INSERTION LOSS, FLOW NOISE AND TOTAL PRESSURE LOSS
I.S. EN ISO 3743-1:2010 ACOUSTICS - DETERMINATION OF SOUND POWER LEVELS AND SOUND ENERGY LEVELS OF NOISE SOURCES USING SOUND PRESSURE - ENGINEERING METHODS FOR SMALL MOVABLE SOURCES IN REVERBERANT FIELDS - PART 1: COMPARISON METHOD FOR A HARD-WALLED TEST ROOM
DIN EN 15036-2:2006-12 Heating boilers - Test regulations for airborne noise emissions from heat generators - Part 2: Flue gas noise emissions at the outlet of the heat generator
UNI EN ISO 11691 : 2009 ACOUSTICS - MEASUREMENT OF INSERTION LOSS OF DUCTED SILENCERS WITHOUT FLOW - LABORATORY SURVEY METHOD
DIN EN ISO 11200:1996-07 ACOUSTICS - NOISE EMITTED BY MACHINERY AND EQUIPMENT - GUIDELINES FOR THE USE OF BASIC STANDARDS FOR THE DETERMINATION OF EMISSION SOUND PRESSURE LEVELS AT A WORK STATION AND AT OTHER SPECIFIED POSITIONS (ISO 11200:2014)
I.S. EN ISO 11204:2010 ACOUSTICS - NOISE EMITTED BY MACHINERY AND EQUIPMENT - DETERMINATION OF EMISSION SOUND PRESSURE LEVELS AT A WORK STATION AND AT OTHER SPECIFIED POSITIONS APPLYING ACCURATE ENVIRONMENTAL CORRECTIONS
I.S. EN ISO 3745:2012 ACOUSTICS - DETERMINATION OF SOUND POWER LEVELS AND SOUND ENERGY LEVELS OF NOISE SOURCES USING SOUND PRESSURE - PRECISION METHODS FOR ANECHOIC ROOMS AND HEMI-ANECHOIC ROOMS (ISO 3745:2012)
I.S. EN ISO 7731:2008 ERGONOMICS - DANGER SIGNALS FOR PUBLIC AND WORK AREAS - AUDITORY DANGER SIGNALS
DIN EN ISO 7779:2011-01 ACOUSTICS - MEASUREMENT OF AIRBORNE NOISE EMITTED BY INFORMATION TECHNOLOGY AND TELECOMMUNICATIONS EQUIPMENT
I.S. EN ISO 3741:2010 ACOUSTICS - DETERMINATION OF SOUND POWER LEVELS AND SOUND ENERGY LEVELS OF NOISE SOURCES USING SOUND PRESSURE - PRECISION METHODS FOR REVERBERATION TEST ROOMS
DIN EN 13141-2:2010-12 Ventilation for buildings - Performance testing of components/products for residential ventilation - Part 2: Exhaust and supply air terminal devices
I.S. EN ISO 8253-1:2010 ACOUSTICS - AUDIOMETRIC TEST METHODS - PART 1: PURE-TONE AIR AND BONE CONDUCTION AUDIOMETRY
DIN EN ISO 3382-2:2008-09 ACOUSTICS - MEASUREMENT OF ROOM ACOUSTIC PARAMETERS - PART 2: REVERBERATION TIME IN ORDINARY ROOMS
I.S. EN 12981:2005 COATING PLANTS - SPRAY BOOTHS FOR APPLICATION OF ORGANIC POWDER COATING MATERIAL - SAFETY REQUIREMENTS
I.S. EN ISO 1680:2013 ACOUSTICS - TEST CODE FOR THE MEASUREMENT OF AIRBORNE NOISE EMITTED BY ROTATING ELECTRICAL MACHINES (ISO 1680:2013)
I.S. EN ISO 15006:2011 ROAD VEHICLES - ERGONOMIC ASPECTS OF TRANSPORT INFORMATION AND CONTROL SYSTEMS - SPECIFICATIONS FOR IN-VEHICLE AUDITORY PRESENTATION (ISO 15006:2011)
I.S. EN ISO 11546-2:2009 ACOUSTICS - DETERMINATION OF SOUND INSULATION PERFORMANCES OF ENCLOSURES - PART 2: MEASUREMENTS IN SITU (FOR ACCEPTANCE AND VERIFICATION PURPOSES)
I.S. EN ISO 11546-1:2009 ACOUSTICS - DETERMINATION OF SOUND INSULATION PERFORMANCES OF ENCLOSURES - PART 1: MEASUREMENTS UNDER LABORATORY CONDITIONS (FOR DECLARATION PURPOSES)
I.S. EN ISO 3744:2010 ACOUSTICS - DETERMINATION OF SOUND POWER LEVELS AND SOUND ENERGY LEVELS OF NOISE SOURCES USING SOUND PRESSURE - ENGINEERING METHODS FOR AN ESSENTIALLY FREE FIELD OVER A REFLECTING PLANE
EN ISO 2922:2000/A1:2013 ACOUSTICS - MEASUREMENT OF AIRBORNE SOUND EMITTED BY VESSELS ON INLAND WATERWAYS AND HARBOURS (ISO 2922:2000/AMD 1:2013)
I.S. EN 13141-2:2010 VENTILATION FOR BUILDINGS - PERFORMANCE TESTING OF COMPONENTS/PRODUCTS FOR RESIDENTIAL VENTILATION - PART 2: EXHAUST AND SUPPLY AIR TERMINAL DEVICES
I.S. EN ISO 2922:2000 ACOUSTICS - MEASUREMENT OF AIRBORNE SOUND EMITTED BY VESSELS ON INLAND WATERWAYS AND HARBOURS (ISO 2922:2000)
DIN EN ISO 10819:2013-12 MECHANICAL VIBRATION AND SHOCK - HAND-ARM VIBRATION - MEASUREMENT AND EVALUATION OF THE VIBRATION TRANSMISSIBILITY OF GLOVES AT THE PALM OF THE HAND (ISO 10819:2013)
I.S. EN ISO 9614-3:2009 ACOUSTICS - DETERMINATION OF SOUND POWER LEVELS OF NOISE SOURCES USING SOUND INTENSITY - PART 3: PRECISION METHOD FOR MEASUREMENT BY SCANNING
EN ISO 11691:2009 Acoustics - Measurement of insertion loss of ducted silencers without flow - Laboratory survey method (ISO 11691:1995)
I.S. EN ISO 4869-4:2000 ACOUSTICS - HEARING PROTECTORS - PART 4 - MEASUREMENT OF EFFECTIVE SOUND PRESSURE LEVELS FOR LEVEL-DEPENDENT SOUND-RESTORATION EAR-MUFFS
I.S. EN ISO 11202:2010 ACOUSTICS - NOISE EMITTED BY MACHINERY AND EQUIPMENT - DETERMINATION OF EMISSION SOUND PRESSURE LEVELS AT A WORK STATION AND AT OTHER SPECIFIED POSITIONS APPLYING APPROXIMATE ENVIRONMENTAL CORRECTIONS
I.S. EN ISO 11201:2010 ACOUSTICS - NOISE EMITTED BY MACHINERY AND EQUIPMENT - DETERMINATION OF EMISSION SOUND PRESSURE LEVELS AT A WORK STATION AND AT OTHER SPECIFIED POSITIONS IN AN ESSENTIALLY FREE FIELD OVER A REFLECTING PLANE WITH NEGLIGIBLE ENVIRONMENTAL CORRECTIONS
DIN EN ISO 7235:2010-01 Acoustics - Laboratory measurement procedures for ducted silencers and air-terminal units - Insertion loss, flow noise and total pressure loss (ISO 7235:2003)
VDI 3743 Blatt 1:2003-09 Characteristic noise emission values of technical sound sources - Pumps; Centrifugal pumps
VDI 2038 Blatt 3:2013-11 Serviceability of structures under dynamic loads - Methods of analysis and evaluation in structural dynamics - Secondary airborne sound - prognosis, measurement, evaluation and reduction measures
VDI 2038 Blatt 1:2012-06 Serviceability of structures under dynamic loads - Methods of analysis and evaluation in structural dynamics - Basics, methods, procedures and loads
BS 848-6(2003) : 2003 FANS FOR GENERAL PURPOSES - METHOD OF MEASUREMENT OF FAN VIBRATION
BIS IS/ISO 2631-2 : 2003(R2007) MECHANICAL VIBRATION AND SHOCK - EVALUATION OF HUMAN EXPOSURE TO WHOLE BODY VIBRATION - PART 2: VIBRATION IN BUILDINGS (1 HZ TO 80 HZ)
SAE ARP 5534 : 2013 APPLICATION OF PURE-TONE ATMOSPHERIC ABSORPTION LOSSES TO ONE-THIRD OCTAVE-BAND DATA
UNE-EN 61400-11:2013 Wind turbines - Part 11: Acoustic noise measurement techniques
I.S. EN ISO 3740:2000 ACOUSTICS - DETERMINATION OF SOUND POWER LEVELS OF NOISE SOURCES - GUIDELINES FOR THE USE OF BASIC STANDARDS
ISO 17497-2:2012 Acoustics — Sound-scattering properties of surfaces — Part 2: Measurement of the directional diffusion coefficient in a free field
ISO 16832:2006 Acoustics Loudness scaling by means of categories
10/30094845 DC : 0 BS ISO 3745 - ACOUSTICS - DETERMINATION OF SOUND POWER LEVELS AND SOUND ENERGY LEVELS OF NOISE SOURCES USING SOUND PRESSURE - PRECISION METHODS FOR ANECHOIC TEST ROOMS AND HEMI-ANECHOIC TEST ROOMS
UNI EN ISO 3382-3 : 2012 ACOUSTICS - MEASUREMENT OF ROOM ACOUSTIC PARAMETERS - PART 3: OPEN PLAN OFFICES
TS 103 740 : 1.1.2 SPEECH AND MULTIMEDIA TRANSMISSION QUALITY (STQ); TRANSMISSION REQUIREMENTS FOR WIDEBAND WIRELESS TERMINALS (HANDSFREE) FROM A QOS PERSPECTIVE AS PERCEIVED BY THE USER
12/30239877 DC : 0 BS EN 60065 ED 8.0 - AUDIO, VIDEO AND SIMILAR ELECTRONIC APPARATUS - SAFETY REQUIREMENTS
DIN EN ISO 24501:2011-04 Ergonomics - Accessible design - Sound pressure levels of auditory signals for consumer products (ISO 24501:2010)
10/30214903 DC : 0 BS EN ISO 3095 - RAILWAY APPLICATIONS - ACOUSTICS - MEASUREMENT OF NOISE EMITTED BY RAILBOUND VEHICLES
PD CEN/TR 15068:2009 Gas welding equipment. Measurement of noise emitted by blowpipe for welding, cutting, heating, brazing and soldering. Measurement method
CEI EN 60645-1 : 2016 ELECTROACOUSTICS - AUDIOMETRIC EQUIPMENT - PART 1: EQUIPMENT FOR PURE-TONE AUDIOMETRY
BS EN ISO 10140-5:2010 ACOUSTICS - LABORATORY MEASUREMENT OF SOUND INSULATION OF BUILDING ELEMENTS - PART 5: REQUIREMENTS FOR TEST FACILITIES AND EQUIPMENT
DIN EN ISO 10140-3 E : 2015 ACOUSTICS - LABORATORY MEASUREMENT OF SOUND INSULATION OF BUILDING ELEMENTS - PART 3: MEASUREMENT OF IMPACT SOUND INSULATION (ISO 10140-3:2010 + AMD. 1:2015)
I.S. EN ISO 140-12:2000 ACOUSTICS - MEASUREMENT OF SOUND INSULATION IN BUILDINGS AND OF BUILDING ELEMENTS - PART 12: LABORATORY MEASUREMENT OF ROOM-TO-ROOM AIRBORNE AND IMPACT SOUND INSULATION OF AN ACCESS FLOOR
09/30196772 DC : 0 BS ISO 7240-24 - FIRE DETECTION AND FIRE ALARM SYSTEMS - PART 24: SOUND-SYSTEM LOUDSPEAKERS
PREN 50332-2 : DRAFT 2013 SOUND SYSTEM EQUIPMENT: HEADPHONES AND EARPHONES ASSOCIATED WITH PORTABLE AUDIO EQUIPMENT - MAXIMUM SOUND PRESSURE LEVEL MEASUREMENT METHODOLOGY AND LIMIT CONSIDERATIONS - PART 2: MATCHING OF SETS WITH HEADPHONES IF EITHER OR BOTH ARE OFFERED SEPARATELY
15/30333610 DC : 0 BS EN ISO 11819-2.2 - ACOUSTICS - MEASUREMENT OF THE INFLUENCE OF ROAD SURFACES ON TRAFFIC NOISE - PART 2: THE CLOSE-PROXIMITY METHOD
09/30182105 DC : 0 BS EN 60349-2 - ELECTRICAL TRACTION - ROTATING ELECTRICAL MACHINES FOR RAIL AND ROAD VEHICLES - PART 2: ELECTRONIC CONVERTER-FED ALTERNATING CURRENT MOTORS
I.S. EN ISO 5349-1:2002 MECHANICAL VIBRATION - MEASUREMENT AND EVALUATION OF HUMAN EXPOSURE TO HAND-TRANSMITTED VIBRATION - PART 1: GENERAL REQUIREMENTS
ECMA 74 : 14ED 2017 MEASUREMENT OF AIRBORNE NOISE EMITTED BY INFORMATION TECHNOLOGY AND TELECOMMUNICATIONS EQUIPMENT
BS EN 60349-2:2010 Electrical traction. Rotating electrical machines for rail and road vehicles Electronic converter-fed alternating current motors
BS EN 62520:2011 Railway applications. Electric traction. Short-primary type linear induction motors (LIM) fed by power converters
I.S. EN 60349-1:2010 ELECTRIC TRACTION - ROTATING ELECTRICAL MACHINES FOR RAIL AND ROAD VEHICLES - PART 1: MACHINES OTHER THAN ELECTRONIC CONVERTOR-FED ALTERNATING CURRENT MOTORS
UNE-EN ISO 10140-3:2011 Acoustics - Laboratory measurement of sound insulation of building elements - Part 3: Measurement of impact sound insulation (ISO 10140-3:2010)
EN 1793-6:2012 Road traffic noise reducing devices - Test method for determining the acoustic performance - Part 6: Intrinsic characteristics - In situ values of airborne sound insulation under direct sound field conditions
DIN EN ISO 16283-3 E : 2016 ACOUSTICS - FIELD MEASUREMENT OF SOUND INSULATION IN BUILDINGS AND OF BUILDING ELEMENTS - PART 3: FACADE SOUND INSULATION (ISO 16283-3:2016)
BS EN 50332-1:2013 Sound system equipment: Headphones and earphones associated with personal music players. Maximum sound pressure level measurement methodology General method for \'one package equipment\'
BS EN 60534-8-1:2005 Industrial-process control valves Noise considerations. Laboratory measurement of noise generated by aerodynamic flow through control valves
ISO 10847:1997 Acoustics — In-situ determination of insertion loss of outdoor noise barriers of all types
UNE-EN 61481-1:2015 Live working - Phase comparators - Part 1: Capacitive type to be used for voltages exceeding 1 kV a.c.
BS ISO 13473-5 : 2009 CHARACTERIZATION OF PAVEMENT TEXTURE BY USE OF SURFACE PROFILES - PART 5: DETERMINATION OF MEGATEXTURE
10/30205316 DC : 0 BS EN 61400-11 - WIND TURBINES - PART 11: ACOUSTIC NOISE MEASUREMENT TECHNIQUES
NF EN ISO 3382-2 : 2010 ACOUSTICS - MEASUREMENT OF ROOM ACOUSTIC PARAMETERS - PART 2: REVERBERATION TIME IN ORDINARY ROOMS
ES 201 377-2 : 1.4.1 SPEECH AND MULTIMEDIA TRANSMISSION QUALITY (STQ); SPECIFICATION AND MEASUREMENT OF SPEECH TRANSMISSION QUALITY; PART 2: MOUTH-TO-EAR SPEECH TRANSMISSION QUALITY INCLUDING TERMINALS
ISO/TS 10811-2:2000 Mechanical vibration and shock — Vibration and shock in buildings with sensitive equipment — Part 2: Classification
UNE-EN 62006:2011 Hydraulic machines - Acceptance tests of small hydroelectric installations
00/702359 DC : DRAFT JAN 2000 ISO/DIS 2631-2 - MECHANICAL VIBRATION AND SHOCK - EVALUATION OF HUMAN EXPOSURE TO WHOLE-BODY VIBRATION - PART 2: VIBRATIONS IN BUILDINGS (1 HZ TO 80 HZ)
I.S. EN 60534-8-1:2005 INDUSTRIAL-PROCESS CONTROL VALVES - PART 8-1: NOISE CONSIDERATIONS - LABORATORY MEASUREMENT OF NOISE GENERATED BY AERODYNAMIC FLOW THROUGH CONTROL VALVES
BS EN ISO 24504:2016 Ergonomics. Accessible design. Sound pressure levels of spoken announcements for products and public address systems
13/30281662 DC : 0 BS EN 50332-1 - SOUND SYSTEM EQUIPMENT: HEADPHONES AND EARPHONES ASSOCIATED WITH PORTABLE AUDIO EQUIPMENT - MAXIMUM SOUND PRESSURE LEVEL MEASUREMENT METHODOLOGY AND LIMIT CONSIDERATIONS - PART 1: GENERAL METHOD FOR "ONE PACKAGE EQUIPMENT"
I.S. EN ISO 140-18:2006 ACOUSTICS - MEASUREMENT OF SOUND INSULATION IN BUILDINGS AND OF BUILDING ELEMENTS - PART 18: LABORATORY MEASUREMENT OF SOUND GENERATED BY RAINFALL ON BUILDING ELEMENTS
ISO 21727:2016 Cinematography — Method of measurement of perceived loudness of short duration motion-picture audio material
BS ISO 2969:2015 Cinematography. B-chain electroacoustic reponse of motion-picture control rooms and indoor theatres. Specifications and measurements
ISO 13474:2009 Acoustics Framework for calculating a distribution of sound exposure levels for impulsive sound events for the purposes of environmental noise assessment
BS ISO 16832:2006 Acoustics. Loudness scaling by means of categories
07/30174056 DC : 0 BS EN 60065 - AUDIO, VIDEO AND SIMILAR ELECTRONIC APPARATUS - SAFETY REQUIREMENTS
UNI EN 54-24 : 2008 FIRE DETECTION AND FIRE ALARM SYSTEMS - PART 24: COMPONENTS OF VOICE ALARM SYSTEMS - LOUDSPEAKERS
BS ISO 7731 : 2003 AMD 16047 ERGONOMICS - DANGER SIGNALS FOR PUBLIC AND WORK AREAS - AUDITORY DANGER SIGNALS
BS EN 16272-4:2016 Railway applications. Track. Noise barriers and related devices acting on airborne sound propagation. Test method for determining the acoustic performance Intrinsic characteristics. In situ values of sound diffraction under direct sound field
UNE-EN ISO 16251-1:2015 Acoustics - Laboratory measurement of the reduction of transmitted impact noise by floor coverings on a small floor mock-up - Part 1: Heavyweight compact floor (ISO 16251-1:2014)
15/30302184 DC : 0 BS ISO 17208-1 - UNDERWATER ACOUSTICS - QUANTITIES AND PROCEDURES FOR DESCRIPTION AND PRECISION MEASUREMENT OF UNDERWATER SOUND FROM SHIPS - PART 1: REQUIREMENTS FOR PRECISION MEASUREMENTS IN DEEP WATER USED FOR COMPARISON PURPOSES
I.S. EN ISO 24504:2016 ERGONOMICS - ACCESSIBLE DESIGN - SOUND PRESSURE LEVELS OF SPOKEN ANNOUNCEMENTS FOR PRODUCTS AND PUBLIC ADDRESS SYSTEMS (ISO 24504:2014)
CSA M5131 : 1997 ACOUSTICS - TRACTORS AND MACHINERY FOR AGRICULTURE AND FORESTRY - MEASUREMENT OF NOISE AT THE OPERATOR'S POSITION - SURVEY METHOD
PREN 50332-1 : DRAFT 2013 SOUND SYSTEM EQUIPMENT: HEADPHONES AND EARPHONES ASSOCIATED WITH PORTABLE AUDIO EQUIPMENT - MAXIMUM SOUND PRESSURE LEVEL MEASUREMENT METHODOLOGY AND LIMIT CONSIDERATIONS - PART 1: GENERAL METHOD FOR "ONE PACKAGE EQUIPMENT"
UNI ISO 2631-1 : 2014 MECHANICAL VIBRATION AND SHOCK - EVALUATION OF HUMAN EXPOSURE TO WHOLE-BODY VIBRATION - PART 1: GENERAL REQUIREMENTS
DIN EN ISO 16283-2:2016-05 ACOUSTICS - FIELD MEASUREMENT OF SOUND INSULATION IN BUILDINGS AND OF BUILDING ELEMENTS - PART 2: IMPACT SOUND INSULATION (ISO 16283-2:2015)
03/113341 DC : DRAFT SEP 2003 BS EN ISO 140-11 - ACOUSTICS - MEASUREMENT OF SOUND INSULATION IN BUILDINGS AND OF BUILDING ELEMENTS - PART 11: LABORATORY MEASUREMENTS OF THE REDUCTION OF TRANSMITTED IMPACT SOUND BY FLOOR COVERINGS ON LIGHTWEIGHT REFERENCE FLOORS
BS EN 61237-4:1998 Broadcast video tape recorders. Methods of measurement Analogue audio performance measurements
ISO 13475-1:1999 Acoustics — Stationary audible warning devices used outdoors — Part 1: Field measurements for determination of sound emission quantities
BS EN 60704-1 : 2010 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - TEST CODE FOR THE DETERMINATION OF AIRBORNE NOISE - PART 1: GENERAL REQUIREMENTS
ANSI S12.10 : 2002 ACOUSTICS - MEASUREMENT OF AIRBORNE NOISE EMITTED BY INFORMATION TECHNOLOGY AND TELECOMMUNICATIONS EQUIPMENT
ISO 2954:2012 Mechanical vibration of rotating and reciprocating machinery — Requirements for instruments for measuring vibration severity
NF EN 60534 8-1 : 2006 INDUSTRIAL-PROCESS CONTROL VALVES - PART 8-1: NOISE CONSIDERATIONS - LABORATORY MEASUREMENT OF NOISE GENERATED BY AERODYNAMIC FLOW THROUGH CONTROL VALVES
CEI EN 60349-2 : 2012 ELECTRIC TRACTION - ROTATING ELECTRICAL MACHINES FOR RAIL AND ROAD VEHICLES - PART 2: ELECTRONIC CONVERTER-FED ALTERNATING CURRENT MOTORS
SAE J 2834 : 2013(R2019) RIDE INDEX STRUCTURE AND DEVELOPMENT METHODOLOGY
EN ISO 7779:2010 Acoustics - Measurement of airborne noise emitted by information technology and telecommunications equipment (ISO 7779:2010)
CSA IEC 61400-11 : 2013(R 2018) WIND TURBINES - PART 11: ACOUSTIC NOISE MEASUREMENT TECHNIQUES
IEC 62006:2010 Hydraulic machines - Acceptance tests of small hydroelectric installations
I.S. EN 15610:2009 RAILWAY APPLICATIONS - NOISE EMISSION - RAIL ROUGHNESS MEASUREMENT RELATED TO ROLLING NOISE GENERATION
I.S. EN ISO 16283-3:2016 ACOUSTICS - FIELD MEASUREMENT OF SOUND INSULATION IN BUILDINGS AND OF BUILDING ELEMENTS - PART 3: FAADE SOUND INSULATION (ISO 16283-3:2016)
S.R. CEN/TS 16272-7:2015 RAILWAY APPLICATIONS - TRACK - NOISE BARRIERS AND RELATED DEVICES ACTING ON AIRBORNE SOUND PROPAGATION - TEST METHOD FOR DETERMINING THE ACOUSTIC PERFORMANCE - PART 7: EXTRINSIC CHARACTERISTICS - IN SITU VALUES OF INSERTION LOSS
ANSI S2.72 PT1 : 2002 MECHANICAL VIBRATION AND SHOCK - EVALUATION OF HUMAN EXPOSURE TO WHOLE-BODY VIBRATION - PART 1: GENERAL REQUIREMENTS
DIN EN ISO 11204:2010-10 ACOUSTICS - NOISE EMITTED BY MACHINERY AND EQUIPMENT - DETERMINATION OF EMISSION SOUND PRESSURE LEVELS AT A WORK STATION AND AT OTHER SPECIFIED POSITIONS APPLYING ACCURATE ENVIRONMENTAL CORRECTIONS
NF ISO 14695 : 2003 INDUSTRIAL FANS - METHOD OF MEASUREMENT OF FAN VIBRATION
CEI EN 60534-8-1 : 2006 VANNES DE REGULATION DES PROCESSUS INDUSTRIELS - PARTIE 8-1: CONSIDERATIONS SUR LE BRUIT - MESURE EN LABORATOIRE DU BRUIT CREE PAR UN DEBIT AERODYNAMIQUE A TRAVERS UNE VANNE DE REGULATION
EN 61996-1 : 2013 COR 2014 MARITIME NAVIGATION AND RADIOCOMMUNICATION EQUIPMENT AND SYSTEMS - SHIPBORNE VOYAGE DATA RECORDER (VDR) - PART 1: PERFORMANCE REQUIREMENTS, METHODS OF TESTING AND REQUIRED TEST RESULTS (IEC 61996-1:2013)
ISO 10843:1997 Acoustics — Methods for the description and physical measurement of single impulses or series of impulses
UNE-EN 61481-2:2015 Live working - Phase comparators - Part 2: Resistive type to be used for voltages from 1 kV to 36 kV a.c.
ISO/TS 19425:2015 Reciprocating internal combustion engines — Measurement method for air cleaners — Sound power level of combustion air inlet noise and insertion loss using sound pressure
I.S. EN 61400-11:2013 WIND TURBINES - PART 11: ACOUSTIC NOISE MEASUREMENT TECHNIQUES (IEC 61400-11:2012 (EQV))
ANSI/ASA S12.50/ISO 3740 : 2002(R2017) Acoustics – Determination of sound power levels of noise sources – Guidelines for the use of basic standards - Nationally Adopted International Standards
ISO 10819:2013 Mechanical vibration and shock — Hand-arm vibration — Measurement and evaluation of the vibration transmissibility of gloves at the palm of the hand
TS 102 924 : 1.2.1 SPEECH AND MULTIMEDIA TRANSMISSION QUALITY (STQ); TRANSMISSION REQUIREMENTS FOR SUPERWIDEBAND/FULLBAND HEADSET TERMINALS FROM A QOS PERSPECTIVE AS PERCEIVED BY THE USER
I.S. EN ISO 10819:2013 MECHANICAL VIBRATION AND SHOCK - HAND-ARM VIBRATION - MEASUREMENT AND EVALUATION OF THE VIBRATION TRANSMISSIBILITY OF GLOVES AT THE PALM OF THE HAND (ISO 10819:2013)
UNE-EN ISO 16283-1:2015 Acoustics - Field measurement of sound insulation in buildings and of building elements - Part 1: Airborne sound insulation (ISO 16283-1:2014)
I.S. EN 60268-5:2003 SOUND SYSTEM EQUIPMENT - PART 5: LOUDSPEAKERS
UNI EN 1793-6 : 2013 ROAD TRAFFIC NOISE REDUCING DEVICES - TEST METHOD FOR DETERMINING THE ACOUSTIC PERFORMANCE - PART 6: INTRINSIC CHARACTERISTICS - IN SITU VALUES OF AIRBORNE SOUND INSULATION UNDER DIRECT SOUND FIELD CONDITIONS
ANSI S12.11-2 : 2013 ACOUSTICS - MEASUREMENT OF AIRBORNE NOISE EMITTED AND STRUCTURE-BORNE VIBRATION INDUCED BY SMALL AIR-MOVING DEVICES - PART 2: STRUCTURE-BORNE VIBRATION MEASUREMENTS
ISO 17208-1:2016 Underwater acoustics Quantities and procedures for description and measurement of underwater sound from ships Part 1: Requirements for precision measurements in deep water used for comparison purposes
UNI CEN/TS 16272-5 : 2014 RAILWAY APPLICATIONS - TRACK - NOISE BARRIERS AND RELATED DEVICES ACTING ON AIRBORNE SOUND PROPAGATION - TEST METHOD FOR DETERMINING THE ACOUSTIC PERFORMANCE - PART 5: INTRINSIC CHARACTERISTICS - IN SITU VALUES OF SOUND REFLECTION UNDER DIRECT SOUND FIELD CONDITIONS
BS EN ISO 7779:2010 Acoustics. Measurement of airborne noise emitted by information technology and telecommunications equipment
EN 62006:2011 Hydraulic machines - Acceptance tests of small hydroelectric installations
UNI EN 54-16 : 2008 FIRE DETECTION AND FIRE ALARM SYSTEMS - PART 16: VOICE ALARM CONTROL AND INDICATING EQUIPMENT
EG 201 377-2 : 1.3.1 SPEECH PROCESSING, TRANSMISSION AND QUALITY ASPECTS (STQ); SPECIFICATION AND MEASUREMENT OF SPEECH TRANSMISSION QUALITY; PART 2: MOUTH-TO-EAR SPEECH TRANSMISSION QUALITY INCLUDING TERMINALS
ISO 6969:2004 Road vehicles Sound signalling devices Tests after mounting on vehicle
UNI EN ISO 10052 : 2010 ACOUSTICS - FIELD MEASUREMENTS OF AIRBORNE AND IMPACT SOUND INSULATION AND OF SERVICE EQUIPMENT SOUND - SURVEY METHOD
ISO 7240-24:2016 Fire detection and fire alarm systems Part 24: Fire alarm loudspeakers
ISO 7779:2010 Acoustics Measurement of airborne noise emitted by information technology and telecommunications equipment
I.S. EN 60268-16:2011 SOUND SYSTEM EQUIPMENT - PART 16: OBJECTIVE RATING OF SPEECH INTELLIGIBILITY BY SPEECH TRANSMISSION INDEX
DIN EN ISO 5349-1:2001-12 MECHANICAL VIBRATIONS - MEASUREMENT AND EVALUATION OF HUMAN EXPOSURE TO HAND-TRANSMITTED VIBRATION - PART 1: GENERAL REQUIREMENTS
DIN EN ISO 1680:2014-04 ACOUSTICS - TEST CODE FOR THE MEASUREMENT OF AIRBORNE NOISE EMITTED BY ROTATING ELECTRICAL MACHINES (ISO 1680:2013)
DIN EN ISO 15006:2012-04 Road vehicles - Ergonomic aspects of transport information and control systems - Specifications for in-vehicle auditory presentation (ISO 15006:2011)
DIN EN ISO 3747:2011-03 Acoustics - Determination of sound power levels and sound energy levels of noise sources using sound pressure - Engineering/survey methods for use in situ in a reverberant environment (ISO 3747:2010)
UNI EN ISO 11202 : 2010 ACOUSTICS - NOISE EMITTED BY MACHINERY AND EQUIPMENT - DETERMINATION OF EMISSION SOUND PRESSURE LEVELS AT A WORKSTATION AND AT OTHER SPECIFIED POSITIONS APPLYING APPROXIMATE ENVIRONMENTAL CORRECTIONS
DIN EN ISO 3741:2011-01 Acoustics - Determination of sound power levels and sound energy levels of noise sources using sound pressure - Precision methods for reverberation test rooms (ISO 3741:2010)
UNE-EN 60349-2:2011 Electric traction - Rotating electrical machines for rail and road vehicles -- Part 2: Electronic converter-fed alternating current motors
ISO 140-11:2005 Acoustics Measurement of sound insulation in buildings and of building elements Part 11: Laboratory measurements of the reduction of transmitted impact sound by floor coverings on lightweight reference floors
BS EN ISO 11819-1:2001 Acoustics. Measurement of the influence of road surfaces on traffic noise Statistical pass-by method
UNE-EN ISO 11203:2010 Acoustics - Noise emitted by machinery and equipment - Determination of emission sound pressure levels at a work station and at other specified positions from the sound power level (ISO 11203:1995)
ISO 14837-1:2005 Mechanical vibration Ground-borne noise and vibration arising from rail systems Part 1: General guidance
ISO 3745:2012 Acoustics — Determination of sound power levels and sound energy levels of noise sources using sound pressure — Precision methods for anechoic rooms and hemi-anechoic rooms
UNE-EN ISO 5136:2010 Acoustics - Determination of sound power radiated into a duct by fans and other air-moving devices - In-duct method (ISO 5136:2003)
BS EN 12215 : 2004 COATING PLANTS - SPRAY BOOTHS FOR APPLICATION OF ORGANIC LIQUID COATING MATERIALS - SAFETY REQUIREMENTS
UNE-EN 13141-2:2011 Ventilation for buildings - Performance testing of components/products for residential ventilation - Part 2: Exhaust and supply air terminal devices
UNE-EN ISO 8253-1:2011 Acoustics - Audiometric test methods - Part 1: Pure-tone air and bone conduction audiometry (ISO 8253-1:2010)
ISO 3747:2010 Acoustics Determination of sound power levels and sound energy levels of noise sources using sound pressure Engineering/survey methods for use in situ in a reverberant environment
BS EN ISO 16032:2004 Acoustics. Measurement of sound pressure level from service equipment in buildings. Engineering method
ISO 3741:2010 Acoustics Determination of sound power levels and sound energy levels of noise sources using sound pressure Precision methods for reverberation test rooms
IEC 61183:1994 Electroacoustics - Random-incidence and diffuse-field calibration of sound level meters
BS EN ISO 5349-1:2001 Mechanical vibration. Measurement and evaluation of human exposure to hand-transmitted vibration General requirements
ISO/TR 4869-4:1998 Acoustics Hearing protectors Part 4: Measurement of effective sound pressure levels for level-dependent sound-restoration ear-muffs
EN 60268-16:2011 SOUND SYSTEM EQUIPMENT - PART 16: OBJECTIVE RATING OF SPEECH INTELLIGIBILITY BY SPEECH TRANSMISSION INDEX
EN ISO 11203:2009 Acoustics - Noise emitted by machinery and equipment - Determination of emission sound pressure levels at a work station and at other specified positions from the sound power level (ISO 11203:1995)
ANSI/ASA S12.10 PART 1:2010(R2020) ACOUSTICS - MEASUREMENT OF AIRBORNE NOISE EMITTED BY INFORMATION TECHNOLOGY AND TELECOMMUNICATIONS EQUIPMENT - PART 1: DETERMINATION OF SOUND POWER LEVEL AND EMISSION SOUND PRESSURE LEVEL
UNI EN ISO 11203 : 2009 ACOUSTICS - NOISE EMITTED BY MACHINERY AND EQUIPMENT - DETERMINATION OF EMISSION SOUND PRESSURE LEVELS AT A WORK STATION AND AT OTHER SPECIFIED POSITIONS FROM THE SOUND POWER LEVEL
I.S. EN ISO 11203:2009 ACOUSTICS - NOISE EMITTED BY MACHINERY AND EQUIPMENT - DETERMINATION OF EMISSION SOUND PRESSURE LEVELS AT A WORK STATION AND AT OTHER SPECIFIED POSITIONS FROM THE SOUND POWER LEVEL
EN ISO 8253-1:2010 Acoustics - Audiometric test methods - Part 1: Pure-tone air and bone conduction audiometry (ISO 8253-1:2010)
EN 15036-2:2006 Heating boilers - Test regulations for airborne noise emissions from heat generators - Part 2: Flue gas noise emissions at the outlet of the heat generator
UNI EN ISO 3744 : 2010 ACOUSTICS - DETERMINATION OF SOUND POWER LEVELS AND SOUND ENERGY LEVELS OF NOISE SOURCES USING SOUND PRESSURE - ENGINEERING METHODS FOR AN ESSENTIALLY FREE FIELD OVER A REFLECTING PLANE
UNI EN ISO 11204 : 2010 ACOUSTICS - NOISE EMITTED BY MACHINERY AND EQUIPMENT - DETERMINATION OF EMISSION SOUND PRESSURE LEVELS AT A WORKSTATION AND AT OTHER SPECIFIED POSITIONS APPLYING ACCURATE ENVIRONMENTAL CORRECTIONS
UNI EN ISO 9614-3 : 2009 ACOUSTICS - DETERMINATION OF SOUND POWER LEVELS OF NOISE SOURCES USING SOUND INTENSITY - PART 3: PRECISION METHOD FOR MEASUREMENT BY SCANNING
UNI EN ISO 11904-1 : 2006 ACOUSTICS - DETERMINATION OF SOUND IMMISSION FROM SOUND SOURCES PLACED CLOSE TO THE EAR - PART 1: TECHNIQUE USING A MICROPHONE IN A REAL EAR (MIRE TECHNIQUE)
UNI EN ISO 11957 : 2009 ACOUSTICS - DETERMINATION OF SOUND INSULATION PERFORMANCE OF CABINS - LABORATORY AND IN SITU MEASUREMENTS
UNI EN ISO 4871 : 2009 ACOUSTICS - DECLARATION AND VERIFICATION OF NOISE EMISSION VALUES OF MACHINERY AND EQUIPMENT
UNI EN ISO 10819 : 2013 MECHANICAL VIBRATION AND SHOCK - HAND-ARM VIBRATION - MEASUREMENT AND EVALUATION OF THE VIBRATION TRANSMISSIBILITY OF GLOVES AT THE PALM OF THE HAND
UNI EN ISO 3095 : 2013 ACOUSTICS - RAILWAY APPLICATIONS - MEASUREMENT OF NOISE EMITTED BY RAILBOUND VEHICLES
UNI EN ISO 11201 : 2010 Acoustics - Noise emitted by machinery and equipment - Determination of emission sound pressure levels at a work station and at other specified positions in an essentially free field over a reflecting plane with negligible environmental corrections
UNI EN 13141-2 : 2010 VENTILATION FOR BUILDINGS - PERFORMANCE TESTING OF COMPONENTS/PRODUCTS FOR RESIDENTIAL VENTILATION - PART 2: EXHAUST AND SUPPLY AIR TERMINAL DEVICES
UNI EN ISO 7235 : 2009 ACOUSTICS - LABORATORY MEASUREMENT PROCEDURES FOR DUCTED SILENCERS AND AIR- TERMINAL UNITS - INSERTION LOSS, FLOW NOISE AND TOTAL PRESSURE LOSS
UNI EN ISO 7731 : 2009 ERGONOMICS - DANGER SIGNALS FOR PUBLIC AND WORK AREAS - AUDITORY DANGER SIGNALS
UNI EN ISO 5349-1 : 2004 MECHANICAL VIBRATION - MEASUREMENT AND EVALUATION OF HUMAN EXPOSURE TO HAND-TRANSMITTED VIBRATION - PART 1: GENERAL REQUIREMENTS
UNI EN ISO 5136 : 2009 ACOUSTICS - DETERMINATION OF SOUND POWER RADIATED INTO A DUCT BY FANS AND OTHER AIR-MOVING DEVICES - IN-DUCT METHOD
UNI EN ISO 3747 : 2011 ACOUSTICS - DETERMINATION OF SOUND POWER LEVELS AND SOUND ENERGY LEVELS OF NOISE SOURCES USING SOUND PRESSURE - ENGINEERING/SURVEY METHODS FOR USE IN SITU IN A REVERBERANT ENVIRONMENT
UNI EN ISO 3741 : 2010 ACOUSTICS - DETERMINATION OF SOUND POWER LEVELS AND SOUND ENERGY LEVELS OF NOISE SOURCES USING SOUND PRESSURE - PRECISION METHODS FOR REVERBERATION TEST ROOMS
UNI EN ISO 3743-1 : 2010 ACOUSTICS - DETERMINATION OF SOUND POWER LEVELS AND SOUND ENERGY LEVELS OF NOISE SOURCES USING SOUND PRESSURE - ENGINEERING METHODS FOR SMALL MOVABLE SOURCES IN REVERBERANT FIELDS - PART 1: COMPARISON METHOD FOR A HARD-WALLED TEST ROOM
UNI EN 12215 : 2010 COATING PLANTS - SPRAY BOOTHS FOR APPLICATION OF ORGANIC LIQUID COATING MATERIALS - SAFETY REQUIREMENTS
UNI EN ISO 11546-1 : 2009 ACOUSTICS - DETERMINATION OF SOUND INSULATION PERFORMANCES OF ENCLOSURES - PART 1: MEASUREMENTS UNDER LABORATORY CONDITIONS (FOR DECLARATION PURPOSES)
UNI EN ISO 15006 : 2012 ROAD VEHICLES - ERGONOMIC ASPECTS OF TRANSPORT INFORMATION AND CONTROL SYSTEMS - SPECIFICATIONS FOR IN-VEHICLE AUDITORY PRESENTATION
UNI ISO 14837-1 : 2013 MECHANICAL VIBRATION - GROUND-BORNE NOISE AND VIBRATION ARISING FROM RAIL SYSTEMS - PART 1: GENERAL GUIDANCE
UNI EN ISO 11546-2 : 2009 ACOUSTICS - DETERMINATION OF SOUND INSULATION PERFORMANCES OF ENCLOSURES - PART 2: MEASUREMENTS IN SITU (FOR ACCEPTANCE AND VERIFICATION PURPOSES)
UNI EN ISO 8253-1 : 2010 ACOUSTICS - AUDIOMETRIC TEST METHODS - PART 1: PURE-TONE AIR AND BONE CONDUCTION AUDIOMETRY
UNI EN ISO 1680 : 2014 ACOUSTICS - TEST CODE FOR THE MEASUREMENT OF AIRBORNE NOISE EMITTED BY ROTATING ELECTRICAL MACHINES
SAE ARP 1307 : 2013 MEASUREMENT OF EXTERIOR NOISE PRODUCED BY AIRCRAFT AUXILIARY POWER UNITS (APUS) AND ASSOCIATED EQUIPMENT DURING GROUND OPERATION
UNE-EN 54-16:2010 Fire detection and fire alarm systems - Part 16: Voice alarm control and indicating equipment
UNE-EN 60349-4:2013 Electric traction - Rotating electrical machines for rail and road vehicles - Part 4: Permanent magnet synchronous electrical machines connected to an electronic converter
DIN EN ISO 10140-5 E : 2014 ACOUSTICS - LABORATORY MEASUREMENT OF SOUND INSULATION OF BUILDING ELEMENTS - PART 5: REQUIREMENTS FOR TEST FACILITIES AND EQUIPMENT (ISO 10140-5:2010 + AMD.1:2014)
UNI EN ISO 3382-1 : 2009 ACOUSTICS - MEASUREMENT OF ROOM ACOUSTIC PARAMETERS - PART 1: PERFORMANCE SPACES
DIN EN ISO 16251-1 E : 2014 ACOUSTICS - LABORATORY MEASUREMENT OF THE REDUCTION OF TRANSMITTED IMPACT NOISE BY FLOOR COVERINGS ON A SMALL FLOOR MOCK-UP - PART 1: HEAVYWEIGHT COMPACT FLOOR (ISO 16251-1:2014)
BS EN ISO 17201-1:2005 Acoustics. Noise from shooting ranges Determination of muzzle blast by measurement
UNI ISO 9613-2 : 2006 ACOUSTICS - ATTENUATION OF SOUND DURING PROPAGATION OUTDOORS - PART 2: GENERAL METHOD OF CALCULATION
DIN EN 1793-4 E : 2015 ROAD TRAFFIC NOISE REDUCING DEVICES - TEST METHOD FOR DETERMINING THE ACOUSTIC PERFORMANCE - PART 4: INTRINSIC CHARACTERISTICS - IN SITU VALUES OF SOUND DIFFRACTION
DIN EN 1793-6:2013-04 ROAD TRAFFIC NOISE REDUCING DEVICES - TEST METHOD FOR DETERMINING THE ACOUSTIC PERFORMANCE - PART 6: INTRINSIC CHARACTERISTICS - IN-SITU VALUES OF AIRBORNE SOUND INSULATION UNDER DIRECT SOUND FIELD CONDITIONS
DIN EN ISO 11202:2010-10 Acoustics - Noise emitted by machinery and equipment - Determination of emission sound pressure levels at a work station and at other specified positions applying approximate environmental corrections (ISO 11202:2010)
I.S. EN 62520:2011 RAILWAY APPLICATIONS - ELECTRIC TRACTION - SHORT-PRIMARY TYPE LINEAR INDUCTION MOTORS (LIM) FED BY POWER CONVERTERS
99/561983 DC : APR 99 ISO/DIS 14257 - ACOUSTICS - MEASUREMENT AND MODELLING OF SPATIAL SOUND DISTRIBUTION CURVES IN WORKROOMS FOR EVALUATION OF THEIR ACOUSTICAL PERFORMANCE
BS ISO 17208-1:2016 Underwater acoustics. Quantities and procedures for description and measurement of underwater sound from ships Requirements for precision measurements in deep water used for comparison purposes
PD CEN/TS 16272-5:2014 Railway applications. Track. Noise barriers and related devices acting on airborne sound propagation. Test method for determining the acoustic performance Intrinsic characteristics. In situ values of sound reflection under direct sound field conditions
CSA ISO 5349-1 : 2016 MECHANICAL VIBRATION - MEASUREMENT AND EVALUATION OF HUMAN EXPOSURE TO HAND-TRANSMITTED VIBRATION - PART 1: GENERAL REQUIREMENTS
DIN EN ISO 3382-1:2009-10 ACOUSTICS - MEASUREMENT OF ROOM ACOUSTIC PARAMETERS - PART 1: PERFORMANCE SPACES
13/30273788 DC : 0 BS ISO 11819-2 - ACOUSTICS - METHOD FOR MEASURING THE INFLUENCE OF ROAD SURFACES ON TRAFFIC NOISE - PART 2: CLOSE-PROXIMITY METHOD
NFE 90 401-2 : 2001 MECHANICAL VIBRATION AND SHOCK - EVALUATION OF HUMAN EXPOSURE TO WHOLE-BODY VIBRATION - PART 2: GENERAL REQUIREMENTS
06/30081121 DC : DRAFT MAR 2006 ISO/DIS 3382-2 - ACOUSTICS - MEASUREMENT OF ROOM ACOUSTIC PARAMETERS - PART 2: REVERBERATION TIME IN ORDINARY ROOMS
07/30164074 DC : 0 BS ISO 13472-2 - ACOUSTICS - MEASUREMENT OF SOUND ABSORPTION PROPERTIES OF ROAD SURFACES IN SITU - PART 2: SPOT METHOD FOR REFLECTIVE SURFACES
ISO 16283-1:2014 Acoustics Field measurement of sound insulation in buildings and of building elements Part 1: Airborne sound insulation
I.S. EN 50332-1:2013 SOUND SYSTEM EQUIPMENT: HEADPHONES AND EARPHONES ASSOCIATED WITH PERSONAL MUSIC PLAYERS - MAXIMUM SOUND PRESSURE LEVEL MEASUREMENT METHODOLOGY - PART 1: GENERAL METHOD FOR ONE PACKAGE EQUIPMENT
DIN EN ISO 3744:2011-02 Acoustics - Determination of sound power levels and sound energy levels of noise sources using sound pressure - Engineering methods for an essentially free field over a reflecting plane (ISO 3744:2010)
09/30197819 DC : 0 BS ISO 2631-1/AMD1 - MECHANICAL VIBRATION - EVALUATION OF HUMAN EXPOSURE TO WHOLE-BODY VIBRATION - PART 1: GENERAL REQUIREMENTS
BS EN ISO 3382-3:2012 Acoustics. Measurement of room acoustic parameters Open plan offices
I.S. EN ISO 354:2003 ACOUSTICS - MEASUREMENT OF SOUND ABSORPTION IN A REVERBERATION ROOM
09/30184412 DC : 0 BS ISO 24501 - ERGONOMICS - ACCESSIBLE DESIGN - SOUND PRESSURE LEVELS OF AUDITORY SIGNALS FOR CONSUMER PRODUCTS
ISO 17497-1:2004 Acoustics — Sound-scattering properties of surfaces — Part 1: Measurement of the random-incidence scattering coefficient in a reverberation room
I.S. EN ISO 8041:2005 HUMAN RESPONSE TO VIBRATION - MEASURING INSTRUMENTATION
BS ISO 13473-3:2002 Characterization of pavement texture by use of surface profiles Specification and classification of profilometers
ISO/TS 13473-4:2008 Characterization of pavement texture by use of surface profiles Part 4: Spectral analysis of surface profiles
10/30210277 DC : 0 BS ISO 15006 - ROAD VEHICLES - ERGONOMICS ASPECTS OF TRANSPORT INFORMATION AND CONTROL SYSTEMS - SPECIFICATIONS FOR IN-VEHICLE AUDITORY PRESENTATION
08/30103108 DC : DRAFT FEB 2008 BS ISO 13474 - ACOUSTICS - FRAMEWORK FOR CALCULATING A DISTRIBUTION OF SOUND EXPOSURE LEVELS OF IMPULSIVE SOUND EVENTS FOR PURPOSES OF ENVIRONMENTAL NOISE ASSESSMENT
09/30203211 DC : 0 BS ISO 3382-3 - ACOUSTICS - MEASUREMENT OF ROOM ACOUSTIC PARAMETERS - PART 3: OPEN PLAN SPACES
DD ISO/TS 13474:2003 Acoustics. Impulse sound propagation for environmental noise assessment
BS EN 61183:1995 Electroacoustics. Random-incidence and diffuse-field calibration of sound level meters
ANSI S12.51 : 2012 : R2017 ACOUSTICS - DETERMINATION OF SOUND POWER LEVELS AND SOUND ENERGY LEVELS OF NOISE SOURCES USING SOUND PRESSURE - PRECISION METHODS FOR REVERBERATION TEST ROOMS
UNI EN 15610 : 2009 RAILWAY APPLICATIONS - NOISE EMISSION - RAIL ROUGHNESS MEASUREMENT RELATED TO ROLLING NOISE GENERATION
AASHTO TP 98 : 2013 : R2015 METHOD OF TEST FOR DETERMINING THE INFLUENCE OF ROAD SURFACES ON VEHICLE NOISE USING THE STATISTICAL ISOLATED PASS-BY (SIP) METHOD
UNE-ISO 2631-4:2014 Mechanical vibration and shock — Evaluation of human exposure to whole-body vibration — Part 4: Guidelines for the evaluation of the effects of vibration and rotational motion on passenger and crew comfort in fixed-guideway transport systems — Amendment 1
03/303500 DC : DRAFT FEB 2003 ISO 6969 - ROAD VEHICLES - SOUND SIGNALLING DEVICES - TESTS AFTER MOUNTING ON VEHICLE
DIN EN 15610:2009-08 Railway applications - Noise emission - Rail roughness measurement related to rolling noise generation
BS EN 1793-4:2015 Road traffic noise reducing devices. Test method for determining the acoustic performance Intrinsic characteristics. In situ values of sound diffraction
14/30296484 DC : 0 BS EN 1793-5 - ROAD TRAFFIC NOISE REDUCING DEVICES - TEST METHOD FOR DETERMINING THE ACOUSTIC PERFORMANCE - PART 5: INTRINSIC CHARACTERISTICS - IN SITU VALUES OF SOUND REFLECTION UNDER DIRECT SOUND FIELD CONDITIONS
13/30267621 DC : 0 BS EN 61481-1 ED 1.0 - LIVE WORKING - PHASE COMPARATORS - PART 1: CAPACITIVE TYPE TO BE USED FOR VOLTAGES EXCEEDING 1 KV A.C.
08/30087659 DC : 0 ISO 10140-5 - ACOUSTICS - LABORATORY MEASUREMENT OF SOUND INSULATION OF BUILDING ELEMENTS - PART 5: REQUIREMENTS FOR TEST FACILITIES AND EQUIPMENT
CEI EN 61400-11 : 2014 WIND TURBINES - PART 11: ACOUSTIC NOISE MEASUREMENT TECHNIQUES
BS ISO 17497-2:2012 Acoustics. Sound-scattering properties of surfaces Measurement of the directional diffusion coefficient in a free field
12/30234183 DC : 0 BS ISO 24504 - ERGONOMICS - ACCESSIBLE DESIGN - SOUND PRESSURE LEVELS OF SPOKEN ANNOUNCEMENTS FOR PRODUCTS AND PUBLIC ADDRESS SYSTEMS
UNE-EN 60065:2015 Audio, video and similar electronic apparatus - Safety requirements
01/564696 DC : DRAFT NOV 2001 BS ISO 7731 - ERGONOMICS - DANGER SIGNALS FOR PUBLIC AND WORK AREAS - AUDITORY DANGER SIGNALS
BS EN ISO 24501:2010 Ergonomics. Accessible design. Sound pressure levels of auditory signals for consumer products
BS EN 54-24:2008 Fire detection and fire alarm systems Components of voice alarm systems. Loudspeakers
BS EN 61996-2:2008 Maritime navigation and radiocommunication equipment and systems. Shipborne voyage data recorder (VDR) Simplified voyage data recorder (S-VDR). Performance requirements, methods of testing and required test results
ISO 140-8:1997 Acoustics Measurement of sound insulation in buildings and of building elements Part 8: Laboratory measurements of the reduction of transmitted impact noise by floor coverings on a heavyweight standard floor
EN ISO 17201-1:2005/AC:2009 ACOUSTICS - NOISE FROM SHOOTING RANGES - PART 1: DETERMINATION OF MUZZLE BLAST BY MEASUREMENT
14/30297521 DC : 0 BS EN 16272-4 - RAILWAY APPLICATIONS - TRACK - NOISE BARRIERS AND RELATED DEVICES ACTING ON AIRBORNE SOUND PROPAGATION - TEST METHOD FOR DETERMINING THE ACOUSTIC PERFORMANCE - PART 4: INTRINSIC CHARACTERISTICS - IN SITU VALUES OF SOUND DIFFRACTION UNDER DIRECT SOUND FIELD CONDITIONS
08/30176438 DC : DRAFT JAN 2008 BS EN 60645-1 - ELECTRO ACOUSTICS - AUDIOMETRIC EQUIPMENT - PART 1: PURE-TONE AUDIOMETERS
BS ISO 13472-1:2002 Acoustics. Measurement of sound absorption properties of road surfaces in situ Extended surface method
CEI EN 61996-2 : 2011 MARITIME NAVIGATION AND RADIOCOMMUNICATION EQUIPMENT AND SYSTEMS SHIPBORNE VOYAGE DATA RECORDER (VDR) - PART 2: SIMPLIFIED VOYAGE ATA RECORDER (S-VDR) - PERFORMANCE REQUIREMENTS, METHODS OF ESTING AND REQUIRED TEST RESULTS
BS EN ISO 13473-5:2009 Characterization of pavement texture by use of surface profiles Determination of megatexture
I.S. EN 61237-4:1998 BROADCAST VIDEO TAPE RECORDERS - METHODS OF MEASUREMENT - PART 4: ANALOGUE PERFORMANCE MEASUREMENTS
BS EN ISO 3382-2:2008 Acoustics. Measurement of room acoustic parameters Reverberation time in ordinary rooms
DIN ISO 13473-5:2009-10 CHARACTERIZATION OF PAVEMENT TEXTURE BY USE OF SURFACE PROFILES - PART 5: DETERMINATION OF MEGATEXTURE
BS EN 50332-2:2013 Sound system equipment: Headphones and earphones associated with personal music players. Maximum sound pressure level measurement methodology Matching of sets with headphones if either or both are offered separately, or are offered as one package equipment but with standardised connectors between the two allowing to combine components of different manufacturers or different design
UNI ISO 230-5 : 2010 TEST CODE FOR MACHINE TOOLS - PART 5: DETERMINATION OF THE NOISE EMISSION
BS ISO 14695:2003 Industrial fans. Method of measurement of fan vibration
DD IEC PAS 61996-2 : DRAFT DEC 2005 MARITIME NAVIGATION AND RADIOCOMMUNICATION EQUIPMENT AND SYSTEMS - SHIPBORNE VOYAGE DATA RECORDER (VDR) - PART 2: SIMPLIFIED VOYAGE DATA RECORDER (S-VDR) - PERFORMANCE REQUIREMENTS - METHODS OF TESTING AND REQUIRED TEST RESULTS
DD ISO/TS 4869-5:2006 Acoustics. Hearing protectors Method for estimation of noise reduction using fitting by inexperienced test subjects
ANSI S1.42 : 2001 : R2011 DESIGN RESPONSE OF WEIGHTING NETWORKS FOR ACOUSTICAL MEASUREMENTS
UNI EN 15461 : 2011 RAILWAY APPLICATIONS - NOISE EMISSION - CHARACTERISATION OF THE DYNAMIC PROPERTIES OF TRACK SECTIONS FOR PASS BY NOISE MEASUREMENTS
ANSI/ASA S12.53 PART 1 : 2011(R2016) ACOUSTICS - DETERMINATION OF SOUND POWER LEVELS AND SOUND ENERGY LEVELS OF NOISE SOURCES USING SOUND PRESSURE - ENGINEERING METHODS FOR SMALL MOVABLE SOURCES IN REVERBERANT FIELDS - PART 1: COMPARISON METHOD FOR A HARD-WALLED TEST ROOM
UNI EN ISO 24501 : 2011 ERGONOMICS - ACCESSIBLE DESIGN - SOUND PRESSURE LEVELS OF AUDITORY SIGNALS FOR CONSUMER PRODUCTS
CSA C22.2 No. 60065 : 2016 AUDIO, VIDEO AND SIMILAR ELECTRONIC APPARATUS - SAFETY REQUIREMENTS
UNE-EN 1793-4:2015 Road traffic noise reducing devices - Test method for determining the acoustic performance - Part 4: Intrinsic characteristics - In situ values of sound diffraction
CEI EN 60118-15 : 2014 ELECTROACOUSTICS - HEARING AIDS - PART 15: METHODS FOR CHARACTERISING SIGNAL PROCESSING IN HEARING AIDS WITH A SPEECH-LIKE SIGNAL
ANSI S1.42 : 2001 DESIGN RESPONSE OF WEIGHTING NETWORKS FOR ACOUSTICAL MEASUREMENTS
UNI EN ISO 3382-2 : 2008 ACOUSTICS - MEASUREMENT OF THE REVERBERATION TIME OF ROOMS WITH REFERENCE TO OTHER ACOUSTICAL PARAMETERS
CEI EN 62006 : 2011 HYDRAULIC MACHINES - ACCEPTANCE TESTS OF SMALL HYDROELECTRIC INSTALLATIONS
I.S. EN 60065:2014 AUDIO, VIDEO AND SIMILAR ELECTRONIC APPARATUS - SAFETY REQUIREMENTS
ANSI S12.50 : 2002 ACOUSTICS - DETERMINATION OF SOUND POWER LEVELS OF NOISE SOURCES - GUIDELINES FOR THE USE OF BASIC STANDARDS
TS 103 738 : 1.1.2 SPEECH AND MULTIMEDIA TRANSMISSION QUALITY (STQ); TRANSMISSION REQUIREMENTS FOR NARROWBAND WIRELESS TERMINALS (HANDSFREE) FROM A QOS PERSPECTIVE AS PERCEIVED BY THE USER
PREN 1459-7 : DRAFT 2017 ROUGH-TERRAIN TRUCKS - SAFETY REQUIREMENTS AND VERIFICATION - PART 7: TEST METHOD AND DETERMINATION OF NOISE EMISSION
I.S. EN 60349-2:2010 ELECTRIC TRACTION - ROTATING ELECTRICAL MACHINES FOR RAIL AND ROAD VEHICLES - PART 2: ELECTRONIC CONVERTER-FED ALTERNATING CURRENT MOTORS
I.S. EN 61606-3:2008 AUDIO AND AUDIOVISUAL EQUIPMENT - DIGITAL AUDIO PARTS - BASIC MEASUREMENT METHODS OF AUDIO CHARACTERISTICS - PART 3: PROFESSIONAL USE
ISO 13473-3:2002 Characterization of pavement texture by use of surface profiles — Part 3: Specification and classification of profilometers
ISO 1996-2:2017 Acoustics — Description, measurement and assessment of environmental noise — Part 2: Determination of sound pressure levels
NF EN ISO 7779 : 2010 ACOUSTICS - MEASUREMENT OF AIRBORNE NOISE EMITTED BY INFORMATION TECHNOLOGY AND TELECOMMUNICATIONS EQUIPMENT
BS EN 15610:2009 Railway applications. Noise emission. Rail roughness measurement related to rolling noise generation
16/30348450 DC : 0 BS EN 13819-3 - HEARING PROTECTORS - TESTING - PART 3: SUPPLEMENTARY ACOUSTIC TEST METHOD
ANSI S2.72/Part 1-2002(R2007) MECHANICAL VIBRATION AND SHOCK - EVALUATION OF HUMAN EXPOSURE TO WHOLE-BODY VIBRATION - PART 1: GENERAL REQUIREMENTS
ANSI S3.42-2 : 2012 TESTING HEARING AIDS - PART 2: METHODS FOR CHARACTERIZING SIGNAL PROCESSING IN HEARING AIDS WITH A SPEECH-LIKE SIGNAL
I.S. EN 54-24:2008 FIRE DETECTION AND FIRE ALARM SYSTEMS - PART 24: COMPONENTS OF VOICE ALARM SYSTEMS - LOUDSPEAKERS
DIN EN 15610 E : 2009 RAILWAY APPLICATIONS - NOISE EMISSION - RAIL ROUGHNESS MEASUREMENT RELATED TO ROLLING NOISE GENERATION
ANSI S1.42 : 2001(R2016) DESIGN RESPONSE OF WEIGHTING NETWORKS FOR ACOUSTICAL MEASUREMENTS
I.S. EN 61243-3:2014 LIVE WORKING - VOLTAGE DETECTORS - PART 3: TWO-POLE LOW-VOLTAGE TYPE
BS EN 60704-2-3:2002 Household and similar electrical appliances. Test code for the determination of airborne acoustical noise Particular requirements for dishwashers
CEI EN 61265 : 1996 ELECTROACOUSTICS - INSTRUMENTS FOR MEASUREMENT OF AIRCRAFT NOISE - PERFORMANCE REQUIREMENTS FOR SYSTEMS TO MEASURE ONE-THIRD-OCTAVE BAND SOUND PRESSURE LEVELS IN NOISE CERTIFICATION OF TRANSPORT-CATEGORY AEROPLANES
CEI EN 61606-3 : 2009 AUDIO AND AUDIOVISUAL EQUIPMENT - DIGITAL AUDIO PARTS - BASIC MEASUREMENT METHODS OF AUDIO CHARACTERISTICS - PART 3: PROFESSIONAL USE
BS EN 61400-11 : 2013 WIND TURBINES - PART 11: ACOUSTIC NOISE MEASUREMENT TECHNIQUES
BS EN ISO 10819:2013 Mechanical vibration and shock. Hand-arm vibration. Measurement and evaluation of the vibration transmissibility of gloves at the palm of the hand
EN 15610:2009 Railway applications - Noise emission - Rail roughness measurement related to noise generation
I.S. EN 61243-1:2005 LIVE WORKING - VOLTAGE DETECTORS - PART 1: CAPACITIVE TYPE TO BE USED FOR VOLTAGES EXCEEDING 1 KV A.C.
NF EN ISO 11202 : 2010 ACOUSTICS - NOISE EMITTED BY MACHINERY AND EQUIPMENT - DETERMINATION OF EMISSION SOUND PRESSURE LEVELS AT A WORK STATION AND AT OTHER SPECIFIED POSITIONS APPLYING APPROXIMATE ENVIRONMENTAL CORRECTIONS
I.S. EN 54-16:2008 FIRE DETECTION AND FIRE ALARM SYSTEMS - PART 16: VOICE ALARM CONTROL AND INDICATING EQUIPMENT
ISO 10302-2:2011 Acoustics — Measurement of airborne noise emitted and structure-borne vibration induced by small air-moving devices — Part 2: Structure-borne vibration measurements
I.S. EN 62006:2011 HYDRAULIC MACHINES - ACCEPTANCE TESTS OF SMALL HYDROELECTRIC INSTALLATIONS
ISO 14695:2003 Industrial fans Method of measurement of fan vibration
ISO 354:2003 Acoustics — Measurement of sound absorption in a reverberation room
EN ISO 3381:2011 Railway applications - Acoustics - Measurement of noise inside railbound vehicles (ISO 3381:2005)
EN ISO 3382-2:2008/AC:2009 ACOUSTICS - MEASUREMENT OF ROOM ACOUSTIC PARAMETERS - PART 2: REVERBERATION TIME IN ORDINARY ROOMS
UNE-EN 60645-1:2015 Electroacoustics - Audiometric equipment - Part 1: Equipment for pure-tone audiometry
EN ISO 11200:2014 Acoustics - Noise emitted by machinery and equipment - Guidelines for the use of basic standards for the determination of emission sound pressure levels at a work station and at other specified positions (ISO 11200:2014)
EN ISO 10140-5:2010/A1:2014 ACOUSTICS - LABORATORY MEASUREMENT OF SOUND INSULATION OF BUILDING ELEMENTS - PART 5: REQUIREMENTS FOR TEST FACILITIES AND EQUIPMENT (ISO 10140-5:2010)
I.S. EN ISO 11200:2014 ACOUSTICS - NOISE EMITTED BY MACHINERY AND EQUIPMENT - GUIDELINES FOR THE USE OF BASIC STANDARDS FOR THE DETERMINATION OF EMISSION SOUND PRESSURE LEVELS AT A WORK STATION AND AT OTHER SPECIFIED POSITIONS (ISO/DIS 11200:2012)
DIN EN ISO 11904-2:2005-02 Acoustics - Determination of sound immission from sound sources placed close to the ear - Part 2: Technique using a manikin (ISO 11904-2:2004)
DIN EN ISO 2922:2013-12 Acoustics - Measurement of airborne sound emitted by vessels on inland waterways and harbours (ISO 2922:2000 + Amd 1:2013) (includes Amendment :2013)
DIN EN ISO 14257:2011-11 Acoustics - Measurement and parametric description of of spatial sound distribution curves in workrooms for evaluation of their acoustical performance (ISO 14257:2001)
NF EN ISO 2922 : 2001 AMD 1 2013 ACOUSTICS - MEASUREMENT OF AIRBORNE SOUND EMITTED BY VESSELS ON INLAND WATERWAYS AND HARBOURS
BS EN ISO 1680:2013 Acoustics. Test code for the measurement of airborne noise emitted by rotating electrical machines
UNE-EN ISO 3747:2010 Acoustics - Determination of sound power levels of noise sources using sound pressure - Comparison method in situ (ISO 3747:2000)
BS EN ISO 140-4:1998 Acoustics. Measurement of sound insulation in buildings and of building elements Field measurements of airborne sound insulation between rooms
BS EN ISO 5136:2009 Acoustics. Determination of sound power radiated into a duct by fans and other air-moving devices. In-duct method
ISO 3382:1997 Acoustics — Measurement of the reverberation time of rooms with reference to other acoustical parameters
ISO 16032:2004 Acoustics — Measurement of sound pressure level from service equipment in buildings — Engineering method
BS EN 15036-2:2006 Heating boilers. Test regulations for airborne noise emissions from heat generators Flue gas noise emissions at the outlet of the heat generator
BS EN ISO 11821:1997 Acoustics. Measurement of the in situ sound attenuation of a removable screen
ISO 11546-1:1995 Acoustics Determination of sound insulation performances of enclosures Part 1: Measurements under laboratory conditions (for declaration purposes)
ISO 10052:2004 Acoustics Field measurements of airborne and impact sound insulation and of service equipment sound Survey method
ISO 3743-1:2010 Acoustics Determination of sound power levels and sound energy levels of noise sources using sound pressure Engineering methods for small movable sources in reverberant fields Part 1: Comparison method for a hard-walled test room
ISO 16251-1:2014 Acoustics Laboratory measurement of the reduction of transmitted impact noise by floor coverings on a small floor mock-up Part 1: Heavyweight compact floor
ISO 2922:2000 Acoustics Measurement of airborne sound emitted by vessels on inland waterways and harbours
ISO 11904-1:2002 Acoustics — Determination of sound immission from sound sources placed close to the ear — Part 1: Technique using a microphone in a real ear (MIRE technique)
IEC 61400-11:2012 Wind turbines - Part 11: Acoustic noise measurement techniques
ISO 9614-3:2002 Acoustics — Determination of sound power levels of noise sources using sound intensity — Part 3: Precision method for measurement by scanning
ISO 4869-3:2007 Acoustics — Hearing protectors — Part 3: Measurement of insertion loss of ear-muff type protectors using an acoustic test fixture
ISO 18233:2006 Acoustics Application of new measurement methods in building and room acoustics
ISO 11691:1995 Acoustics Measurement of insertion loss of ducted silencers without flow Laboratory survey method
ISO 3381:2005 Railway applications Acoustics Measurement of noise inside railbound vehicles
ISO 3744:2010 Acoustics Determination of sound power levels and sound energy levels of noise sources using sound pressure Engineering methods for an essentially free field over a reflecting plane
ISO 11202:2010 Acoustics Noise emitted by machinery and equipment Determination of emission sound pressure levels at a work station and at other specified positions applying approximate environmental corrections
IEC 61606-3:2008 Audio and audiovisual equipment - Digital audio parts - Basic measurement methods of audio characteristics - Part 3: Professional use
BS EN 15433-4:2007 Transportation loads. Measurement and evaluation of dynamic mechanical loads Data evaluation
ISO 5349-1:2001 Mechanical vibration Measurement and evaluation of human exposure to hand-transmitted vibration Part 1: General requirements
BS EN ISO 4869-4:2000 Acoustics. Hearing protectors Measurement of effective sound pressure levels for level-dependent sound-restoration ear muffs
BS EN ISO 11546-2:2009 Acoustics. Determination of sound insulation performances of enclosures Measurements in situ (for acceptance and verification purposes)
BS EN ISO 11203:2009 Acoustics. Noise emitted by machinery and equipment. Determination of emission sound pressure levels at a work station and at other specified positions from the sound power level
UNI EN ISO 11200 : 2014 ACOUSTICS - NOISE EMITTED BY MACHINERY AND EQUIPMENT - GUIDELINES FOR THE USE OF BASIC STANDARDS FOR THE DETERMINATION OF EMISSION SOUND PRESSURE LEVELS AT A WORK STATION AND AT OTHER SPECIFIED POSITIONS
ISO 10140-3:2010 Acoustics Laboratory measurement of sound insulation of building elements Part 3: Measurement of impact sound insulation
ISO 11200:2014 Acoustics Noise emitted by machinery and equipment Guidelines for the use of basic standards for the determination of emission sound pressure levels at a work station and at other specified positions
ISO 12001:1996 Acoustics Noise emitted by machinery and equipment Rules for the drafting and presentation of a noise test code
ISO 2631-2:2003 Mechanical vibration and shock — Evaluation of human exposure to whole-body vibration — Part 2: Vibration in buildings (1 Hz to 80 Hz)
UNE-EN ISO 7235:2010 Acoustics - Laboratory measurement procedures for ducted silencers and air-terminal units - Insertion loss, flow noise and total pressure loss (ISO 7235:2003)
ISO 24501:2010 Ergonomics Accessible design Sound pressure levels of auditory signals for consumer products
ISO 1680:2013 Acoustics — Test code for the measurement of airborne noise emitted by rotating electrical machines
ISO 3382-1:2009 Acoustics — Measurement of room acoustic parameters — Part 1: Performance spaces
ISO 7235:2003 Acoustics — Laboratory measurement procedures for ducted silencers and air-terminal units — Insertion loss, flow noise and total pressure loss
ISO 7731:2003 Ergonomics Danger signals for public and work areas Auditory danger signals
IEC 60268-5:2003+AMD1:2007 CSV Sound system equipment - Part 5: Loudspeakers
ISO 140-5:1998 Acoustics Measurement of sound insulation in buildings and of building elements Part 5: Field measurements of airborne sound insulation of faade elements and faades
ISO 11957:1996 Acoustics — Determination of sound insulation performance of cabins — Laboratory and in situ measurements
IEC 62585:2012 Electroacoustics - Methods to determine corrections to obtain the free-field response of a sound level meter
ISO 266:1997 Acoustics — Preferred frequencies
ISO 24504:2014 Ergonomics Accessible design Sound pressure levels of spoken announcements for products and public address systems
UNE-EN ISO 3744:2011 Acoustics - Determination of sound power levels and sound energy levels of noise sources using sound pressure - Engineering methods for an essentially free field over a reflecting plane (ISO 3744:2010)
IEC 60704-1:2010 Household and similar electrical appliances - Test code for the determination of airborne acoustical noise - Part 1: General requirements
ISO 8253-1:2010 Acoustics Audiometric test methods Part 1: Pure-tone air and bone conduction audiometry
ISO 11819-1:1997 Acoustics — Measurement of the influence of road surfaces on traffic noise — Part 1: Statistical Pass-By method
ISO 2631-1:1997 Mechanical vibration and shock — Evaluation of human exposure to whole-body vibration — Part 1: General requirements
IEC 61237-4:1997 Broadcast video tape recorders - Methods of measurement - Part 4: Analogue audio performance measurements
ISO 16283-3:2016 Acoustics Field measurement of sound insulation in buildings and of building elements Part 3: Faade sound insulation
UNE-EN ISO 9614-3:2010 Acoustics - Determination of sound power levels of noise sources using sound intensity - Part 3: Precision method for measurement by scanning (ISO 9614-3:2002)
UNE-EN ISO 12001:2010 Acoustics - Noise emitted by machinery and equipment - Rules for the drafting and presentation of a noise test code (ISO 12001:1996)
UNE-EN ISO 11546-2:2010 Acoustics - Determination of sound insulation performances of enclosures - Part 2: Measurements in situ (for acceptance and verification purposes) (ISO 11546-2:1995)
IEC 60118-15:2012 Electroacoustics - Hearing aids - Part 15: Methods for characterising signal processing in hearing aids with a speech-like signal
IEC 61243-3:2014 Live working - Voltage detectors - Part 3: Two-pole low-voltage type
ISO 14257:2001 Acoustics — Measurement and parametric description of spatial sound distribution curves in workrooms for evaluation of their acoustical performance
UNE-EN ISO 10140-5:2011 Acoustics - Laboratory measurement of sound insulation of building elements - Part 5: Requirements for test facilities and equipment (ISO 10140-5:2010)
UNE-EN ISO 3095:2014 Acoustics - Railway applications - Measurement of noise emitted by railbound vehicles (ISO 3095:2013)
ISO 3382-3:2012 Acoustics Measurement of room acoustic parameters Part 3: Open plan offices
BS EN ISO 3381:2011 Railway applications. Acoustics. Measurement of noise inside railbound vehicles
ISO 140-6:1998 Acoustics Measurement of sound insulation in buildings and of building elements Part 6: Laboratory measurements of impact sound insulation of floors
IEC 62520:2011 Railway applications - Electric traction - Short-primary type linear induction motors (LIM) fed by power converters
BS EN ISO 3743-1:2009 Acoustics. Determination of sound power levels of noise sources. Engineering methods for small, movable sources in reverberant fields Comparison method for hard-walled test rooms
ISO 15006:2011 Road vehicles — Ergonomic aspects of transport information and control systems — Specifications for in-vehicle auditory presentation
UNE-EN ISO 3743-1:2011 Acoustics - Determination of sound power levels and sound energy levels of noise sources using sound pressure - Engineering methods for small movable sources in reverberant fields - Part 1: Comparison method for a hard-walled test room (ISO 3743-1:2010)
ISO 3382-2:2008 Acoustics Measurement of room acoustic parameters Part 2: Reverberation time in ordinary rooms
UNE-EN ISO 3746:2010 Acoustics - Determination of sound power levels of noise sources using sound pressure - Survey method using an enveloping measurement surface over a reflecting plane (ISO 3746:1995, including Cor 1:1995)
BS EN ISO 3747:2010 Acoustics. Determination of sound power levels and sound energy levels of noise sources using sound pressure. Engineering/survey methods for use in situ in a reverberant environment
BS EN ISO 11204:2010 Acoustics. Noise emitted by machinery and equipment. Determination of emission sound pressure levels at a work station and at other specified positions applying accurate environmental corrections
IEC 60349-4:2012 Electric traction - Rotating electrical machines for rail and road vehicles - Part 4: Permanent magnet synchronous electrical machines connected to an electronic converter
ISO 13473-5:2009 Characterization of pavement texture by use of surface profiles Part 5: Determination of megatexture
BS EN ISO 11200:2014 Acoustics. Noise emitted by machinery and equipment. Guidelines for the use of basic standards for the determination of emission sound pressure levels at a work station and at other specified positions
ISO 11821:1997 Acoustics — Measurement of the in situ sound attenuation of a removable screen
IEC 61996-1:2013 Maritime navigation and radiocommunication equipment and systems - Shipborne voyage data recorder (VDR) - Part 1: Performance requirements, methods of testing and required test results
BS EN ISO 2922 : 2001 ACOUSTICS - MEASUREMENT OF AIRBORNE SOUND EMITTED BY VESSELS ON INLAND WATERWAYS AND HARBOURS
IEC 60349-1:2010 Electric traction - Rotating electrical machines for rail and road vehicles - Part 1: Machines other than electronic converter-fed alternating current motors
ISO 11546-2:1995 Acoustics Determination of sound insulation performances of enclosures Part 2: Measurements in situ (for acceptance and verification purposes)
UNE-EN 60349-1:2011 Electric traction - Rotating electrical machines for rail and road vehicles -- Part 1: Machines other than electronic converter-fed alternating current motors
BS EN ISO 11820:1997 Acoustics. Measurements on silencers in situ
BS EN ISO 4871:2009 Acoustics. Declaration and verification of noise emission values of machinery and equipment
IEC 60268-16:2011 Sound system equipment - Part 16: Objective rating of speech intelligibility by speech transmission index
IEC 61996:2000 Maritime navigation and radiocommunication equipment and systems - Shipborne voyage data recorder (VDR) - Performance requirements - Methods of testing and required test results
BS EN ISO 12001:2009 Acoustics. Noise emitted by machinery and equipment. Rules for the drafting and presentation of a noise test code
UNE-EN ISO 3741:2011 Acoustics - Determination of sound power levels and sound energy levels of noise sources using sound pressure - Precision methods for reverberation test rooms (ISO 3741:2010)
IEC 61481-2:2014 Live working - Phase comparators - Part 2: Resistive type to be used for voltages from 1kV to 36 kV a.c.
ISO 8253-3:2012 Acoustics Audiometric test methods Part 3: Speech audiometry
BS EN ISO 140-7:1998 Acoustics. Measurement of sound insulation in buildings and of building elements Field measurements of impact sound insulation of floors
ISO 140-18:2006 Acoustics Measurement of sound insulation in buildings and of building elements Part 18: Laboratory measurement of sound generated by rainfall on building elements
BS EN ISO 140-5:1998 Acoustics. Measurement of sound insulation in buildings and of building elements Field measurements of airborne sound insulation of facade elements and facades
UNE-EN ISO 4871:2010 Acoustics - Declaration and verification of noise emission values of machinery and equipment (ISO 4871:1996)
UNE-EN 61243-3:2015 Live working - Voltage detectors - Part 3: Two-pole low-voltage type
EN 62520:2011 Railway applications - Electric traction - Short-primary type linear induction motors (LIM) fed by power converters
EN ISO 140-18:2006 Acoustics - Measurement of sound insulation in buildings and of building elements - Part 18: Laboratory measurement of sound generated by rainfall on building elements (ISO 140-18:2006)
EN ISO 11904-1 : 2002 ACOUSTICS - DETERMINATION OF SOUND IMMISSION FROM SOUND SOURCES PLACED CLOSE TO THE EAR - PART 1: TECHNIQUE USING A MICROPHONE IN A REAL EAR (MIRE TECHNIQUE)
EN ISO 140-4:1998 Acoustics - Measurement of sound insulation in buildings and of building elements - Part 4: Field measurements of airborne sound insulation between rooms (ISO 140-4:1998)
EN ISO 18233:2006 Acoustics - Application of new measurement methods in building and room acoustics (ISO 18233:2006)
EN ISO 4869-4:2000 ACOUSTICS - HEARING PROTECTORS - PART 4 - MEASUREMENT OF EFFECTIVE SOUND PRESSURE LEVELS FOR LEVEL-DEPENDENT SOUND-RESTORATION EAR-MUFFS
EN ISO 11957:2009 Acoustics - Determination of sound insulation performance of cabins - Laboratory and in situ measurements (ISO 11957:1996)
EN 16272-4:2016 Railway applications - Track - Noise barriers and related devices acting on airborne sound propagation - Test method for determining the acoustic performance - Part 4: Intrinsic characteristics - In situ values of sound diffraction under direct sound field
EN ISO 4869-3:2007 Acoustics - Hearing protectors - Part 3: Measurement of insertion loss of ear-muff type protectors using an acoustic test fixture (ISO 4869-3:2007)
EN ISO 11819-1:2001 Acoustics - Measurement of the influence of road surfaces on traffic noise - Part 1: Statistical Pass-By method (ISO 11819-1:1997)
EN ISO 11821 : 1997 ACOUSTICS - MEASUREMENT OF THE IN SITU SOUND ATTENUATION OF A REMOVABLE SCREEN
EN ISO 3745:2012/A1:2017 ACOUSTICS - DETERMINATION OF SOUND POWER LEVELS AND SOUND ENERGY LEVELS OF NOISE SOURCES USING SOUND PRESSURE - PRECISION METHODS FOR ANECHOIC ROOMS AND HEMI-ANECHOIC ROOMS (ISO 3745:2012/AMD 1:2017)
EN ISO 3743-1:2010 Acoustics - Determination of sound power levels and sound energy levels of noise sources using sound pressure - Engineering methods for small movable sources in reverberant fields - Part 1: Comparison method for a hard-walled test room (ISO 3743-1:2010)
EN ISO 15006:2011 Road vehicles - Ergonomic aspects of transport information and control systems - Specifications for in-vehicle auditory presentation (ISO 15006:2011)
EN ISO 24504:2016 Ergonomics - Accessible design - Sound pressure levels of spoken announcements for products and public address systems (ISO 24504:2014)
EN ISO 12001:2009 Acoustics - Noise emitted by machinery and equipment - Rules for the drafting and presentation of a noise test code (ISO 12001:1996)
EN ISO 140-7:1998 Acoustics - Measurement of sound insulation in buildings and of building elements - Part 7: Field measurements of impact sound insulation of floors (ISO 140-7:1998)
EN ISO 140-11:2005 Acoustics - Measurement of sound insulation in buildings and of building elements - Part 11: Laboratory measurements of the reduction of transmitted impact sound by floor coverings on lightweight reference floors (ISO 140-11:2005)
EN ISO 140-5:1998 Acoustics - Measurement of sound insulation in buildings and of building elements - Part 5: Field measurements of airborne sound insulation of façade elements and façades (ISO 140-5:1998)
EN 54-24:2008 Fire detection and fire alarm systems - Part 24: Components of voice alarm systems - Loudspeakers
EN ISO 11201:2010 Acoustics - Noise emitted by machinery and equipment - Determination of emission sound pressure levels at a work station and at other specified positions in an essentially free field over a reflecting plane with negligible environmental corrections (ISO 11201:2010)
EN ISO 13473-5:2009 Characterization of pavement texture by use of surface profiles - Part 5: Determination of megatexture (ISO 13473-5:2009)
EN ISO 140-12 : 2000 ACOUSTICS - MEASUREMENT OF SOUND INSULATION IN BUILDINGS AND OF BUILDING ELEMENTS - PART 12: LABORATORY MEASUREMENT OF ROOM-TO-ROOM AIRBORNE AND IMPACT SOUND INSULATION OF AN ACCESS FLOOR
EN 54-16:2008 Fire detection and fire alarm systems - Part 16: Voice alarm control and indicating equipment
EN ISO 140-6 : 1998 ACOUSTICS - MEASUREMENT OF SOUND INSULATION IN BUILDINGS AND OF BUILDING ELEMENTS - PART 6: LABORATORY MEASUREMENTS OF IMPACT SOUND INSULATION OF FLOORS
EN ISO 9614-3:2009 Acoustics - Determination of sound power levels of noise sources using sound intensity - Part 3: Precision method for measurement by scanning (ISO 9614-3:2002)
EN ISO 3095:2013 Acoustics - Railway applications - Measurement of noise emitted by railbound vehicles (ISO 3095:2013)
EN ISO 24501:2010 Ergonomics - Accessible design - Sound pressure levels of auditory signals for consumer products (ISO 24501:2010)
EN ISO 3382 : 2000 ACOUSTICS - MEASUREMENT OF THE REVERBERATION TIME OF ROOMS WITH REFERENCE TO OTHER ACOUSTICAL PARAMETERS
EN 15433-4:2007 Transportation loads - Measurement and evaluation of dynamic mechanical loads - Part 4: Data evaluation
EN ISO 16032:2004 Acoustics - Measurement of sound pressure level from service equipment in buildings - Engineering method (ISO 16032:2004)
EN ISO 3741:2010 Acoustics - Determination of sound power levels and sound energy levels of noise sources using sound pressure - Precision methods for reverberation test rooms (ISO 3741:2010)
EN ISO 3382-1:2009 Acoustics - Measurement of room acoustic parameters - Part 1: Performance spaces (ISO 3382-1:2009)
EN ISO 266 : 1997 ACOUSTICS - PREFERRED FREQUENCIES (ISO 266:1997)
EN ISO 140-8 : 1997 ACOUSTICS - MEASUREMENT OF SOUND INSULATION IN BUILDINGS AND OF BUILDING ELEMENTS - PART 8: LABORATORY MEASUREMENTS OF THE REDUCTION OF TRANSMITTED IMPACT NOISE BY FLOOR COVERINGS ON A HEAVYWEIGHT STANDARD FLOOR
EN ISO 1680:2013 Acoustics - Test code for the measurement of airborne noise emitted by rotating electrical machines (ISO 1680:2013)
EN ISO 7731:2008 Ergonomics - Danger signals for public and work areas - Auditory danger signals (ISO 7731:2003)
EN ISO 5136:2009 Acoustics - Determination of sound power radiated into a duct by fans and other air-moving devices - In-duct method (ISO 5136:2003)
EN ISO 7235:2009 Acoustics - Laboratory measurement procedures for ducted silencers and air-terminal units - Insertion loss, flow noise and total pressure loss (ISO 7235:2003)
EN ISO 14257 : 2001 ACOUSTICS - MEASUREMENT AND PARAMETRIC DESCRIPTION OF SPATIAL SOUND DISTRIBUTION CURVES IN WORKROOMS FOR EVALUATION OF THEIR ACOUSTICAL PERFORMANCE
EN ISO 11546-2:2009 Acoustics - Determination of sound insulation performances of enclosures - Part 2: Measurements in situ (for acceptance and verification purposes) (ISO 11546-2:1995)
EN ISO 354:2003 Acoustics - Measurement of sound absorption in a reverberation room (ISO 354:2003)
EN ISO 3744:2010 Acoustics - Determination of sound power levels and sound energy levels of noise sources using sound pressure - Engineering methods for an essentially free field over a reflecting plane (ISO 3744:2010)
EN ISO 11546-1:2009 Acoustics - Determination of sound insulation performances of enclosures - Part 1: Measurements under laboratory conditions (for declaration purposes) (ISO 11546-1:1995)
EN ISO 16283-3:2016 Acoustics - Field measurement of sound insulation in buildings and of building elements - Part 3: Façade sound insulation (ISO 16283-3:2016)
EN ISO 3747:2010 Acoustics - Determination of sound power levels and sound energy levels of noise sources using sound pressure - Engineering/survey methods for use in situ in a reverberant environment (ISO 3747:2010)
UNI EN ISO 8253-3 : 2012 ACOUSTICS - AUDIOMETRIC TEST METHODS - PART 3: SPEECH AUDIOMETRY
EN ISO 4871:2009 Acoustics - Declaration and verification of noise emission values of machinery and equipment (ISO 4871:1996)
EN ISO 11204:2010 Acoustics - Noise emitted by machinery and equipment - Determination of emission sound pressure levels at a work station and at other specified positions applying accurate environmental corrections (ISO 11204:2010)
EN 15461:2008+A1:2010 Railway applications - Noise emission - Characterisation of the dynamic properties of track sections for pass by noise measurements
07/30168731 DC : 0 BS EN 61606-3 - AUDIO AND AUDIOVISUAL EQUIPMENT - DIGITAL AUDIO PARTS - BASIC MEASUREMENTS METHODS OF AUDIO CHARACTERISTICS - PART 3: PROFESSIONAL USE (TC 100)
ISO 11204:2010 Acoustics Noise emitted by machinery and equipment Determination of emission sound pressure levels at a work station and at other specified positions applying accurate environmental corrections
ISO 13472-1:2002 Acoustics Measurement of sound absorption properties of road surfaces in situ Part 1: Extended surface method
BS EN 61481-1:2014 Live working. Phase comparators Capacitive type to be used for voltages exceeding 1 kV a.c.
BS EN ISO 16283-3:2016 Acoustics. Field measurement of sound insulation in buildings and of building elements Façade sound insulation
UNE-EN ISO 13473-5:2010 Characterization of pavement texture by use of surface profiles - Part 5: Determination of megatexture (ISO 13473-5:2009)
03/321016 DC : DRAFT DEC 2003 IEC 60534-8-1 ED.2 - INDUSTRIAL-PROCESS CONTROL VALVES - PART 8-1: NOISE CONSIDERATIONS - LABORATORY MEASUREMENT OF NOISE GENERATED BY AERODYNAMIC FLOW THROUGH CONTROL VALVES
14/30295928 DC : 0 BS EN ISO 16283-3 - ACOUSTICS - FIELD MEASUREMENT OF SOUND INSULATION IN BUILDINGS AND OF BUILDING ELEMENTS - PART 3: FACADE SOUND INSULATION
01/562316 DC : DRAFT JULY 2001 BS EN ISO 7235 ACOUSTICS - LABORATORY MEASUREMENT PROCEDURES FOR DUCTED SILENCERS AND AIR-TERMINAL UNITS - INSERTION LOSS, FLOW NOISE AND TOTAL PRESSURE LOSS
I.S. EN ISO 24501:2010 ERGONOMICS - ACCESSIBLE DESIGN - SOUND PRESSURE LEVELS OF AUDITORY SIGNALS FOR CONSUMER PRODUCTS
15/30274135 DC : 0 BS ISO 18405 - UNDERWATER ACOUSTICS - TERMINOLOGY
I.S. EN 60704-1:2010 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - TEST CODE FOR THE DETERMINATION OF AIRBORNE NOISE - PART 1: GENERAL REQUIREMENTS (IEC 60704-1:2010 (EQV))
BS ISO 15619:2013 Reciprocating internal combustion engines. Measurement method for exhaust silencers. Sound power level of exhaust noise and insertion loss using sound pressure and power loss ratio
I.S. EN ISO 16283-1:2014 ACOUSTICS - FIELD MEASUREMENT OF SOUND INSULATION IN BUILDINGS AND OF BUILDING ELEMENTS - PART 1: AIRBORNE SOUND INSULATION (ISO 16283-1:2014)
11/30212883 DC : 0 BS EN ISO 10819 - MECHANICAL VIBRATION AND SHOCK - HAND-ARM VIBRATION - METHOD FOR THE MEASUREMENT AND EVALUATION OF THE VIBRATION TRANSMISSIBILITY OF GLOVES AT THE PALM OF THE HAND
DIN EN ISO 16251-1:2014-11 ACOUSTICS - LABORATORY MEASUREMENT OF THE REDUCTION OF TRANSMITTED IMPACT NOISE BY FLOOR COVERINGS ON A SMALL FLOOR MOCK-UP - PART 1: HEAVYWEIGHT COMPACT FLOOR (ISO 16251-1:2014)
12/30240135 DC : 0 BS ISO 11200 - ACOUSTICS - NOISE EMITTED BY MACHINERY AND EQUIPMENT - GUIDELINES FOR THE USE OF BASIC STANDARDS FOR THE DETERMINATION OF EMISSION SOUND PRESSURE LEVELS AT A WORK STATION AND AT OTHER SPECIFIED POSITIONS
CEN/TR 15068:2009 Gas welding equipment - Measurement of noise emitted by blowpipe for welding, cutting, heating, brazing and soldering - Measurement method
ISO 3095:2013 Acoustics Railway applications Measurement of noise emitted by railbound vehicles
BS ISO 8579-1:2002 Acceptance code for gear units Test code for airborne sound
BS EN ISO 16283-2:2015 Acoustics. Field measurement of sound insulation in buildings and of building elements Impact sound insulation
BS EN 61243-1 : 2005 LIVE WORKING - VOLTAGE DETECTORS - PART 1: CAPACITIVE TYPE TO BE USED FOR VOLTAGES EXCEEDING 1 KV A.C.
08/30087650 DC : 0 ISO 10140-3 - ACOUSTICS - LABORATORY MEASUREMENT OF SOUND INSULATION OF BUILDING ELEMENTS - PART 3: MEASUREMENT OF IMPACT SOUND INSULATION
UNI EN ISO 16251-1 : 2014 ACOUSTICS - LABORATORY MEASUREMENT OF THE REDUCTION OF TRANSMITTED IMPACT NOISE BY FLOOR COVERINGS ON A SMALL FLOOR MOCK-UP - PART 1: HEAVYWEIGHT COMPACT FLOOR
03/311729 DC : DRAFT JULY 2003 EN ISO 8041 - HUMAN RESPONSE TO VIBRATION - MEASURING INSTRUMENTATION
BS EN 62006:2011 Hydraulic machines. Acceptance tests of small hydroelectric installations
14/30279048 DC : DRAFT OCT 2014 BS EN ISO 389-3 - ACOUSTICS - REFERENCE ZERO FOR THE CALIBRATION OF AUDIOMETRIC EQUIPMENT - PART 3: REFERENCE EQUIVALENT THRESHOLD FORCE LEVELS FOR PURE TONES AND BONE VIBRATORS
DIN EN ISO 11203:2010-01 Acoustics - Noise emitted by machinery and equipment - Determination of emission sound pressure levels at a work station and at other specified positions from the sound power level (ISO 11203:1995)
09/30166871 DC : 0 BS EN 62520 - RAILWAY APPLICATIONS - ELECTRIC TRACTION - SHORT-PRIMARY TYPE LINEAR INDUCTION MOTORS FED BY POWER CONVERTERS
BS EN 62585:2012 Electroacoustics. Methods to determine corrections to obtain the free-field response of a sound level meter
PD ISO/PAS 17208-1:2012 Acoustics. Quantities and procedures for description and measurement of underwater sound from ships General requirements for measurements in deep water
BS EN ISO 3095:2013 Acoustics. Railway applications. Measurement of noise emitted byrailbound vehicles
CEI EN 62585 : 2013 ELECTROACOUSTICS - METHODS TO DETERMINE CORRECTIONS TO OBTAIN THE FREE-FIELD RESPONSE OF A SOUND LEVEL METER
BIS IS 12193-3 : 2012(R2015) METHODS OF MEASUREMENT ON RADIO RECEIVERS FOR VARIOUS CLASSES OF EMISSION - PART 3: RECEIVERS FOR FREQUENCY-MODULATED SOUND BROADCASTING EMISSIONS
11/30253666 DC : 0 BS EN 61996-1 - MARITIME NAVIGATION AND RADIO COMMUNICATION EQUIPMENT AND SYSTEMS - SHIP BORNE VOYAGE DATA RECORDER (VDR) - PART 1: VOYAGE DATA RECORDER (VDR) - PERFORMANCE REQUIREMENTS, METHODS OF TESTING AND REQUIRED TEST RESULTS
DIN EN 54-16 E : 2008 FIRE DETECTION AND FIRE ALARM SYSTEMS - PART 16: VOICE ALARM CONTROL AND INDICATING EQUIPMENT
DIN EN 15461:2011-01 Railway applications - Noise emission - Characterisation of the dynamic properties of track sections for pass by noise measurements (includes Amendment A1:2010)
10/30194376 DC : 0 BS EN 62585 ED.1 - ELECTROACOUSTICS - METHODS TO DETERMINE CORRECTIONS TO OBTAIN FREE-FIELD RESPONSE OF A SOUND LEVEL METER
DIN EN ISO 3745:2012-07 ACOUSTICS - DETERMINATION OF SOUND POWER LEVELS AND SOUND ENERGY LEVELS OF NOISE SOURCES USING SOUND PRESSURE - PRECISION METHODS FOR ANECHOIC ROOMS AND HEMI-ANECHOIC ROOMS (ISO 3745:2012 + AMD 1:2017)
12/30239340 DC : 0 BS ISO 16251-1 - ACOUSTICS - LABORATORY MEASUREMENT OF THE REDUCTION OF TRANSMITTED IMPACT NOISE BY FLOOR COVERINGS ON A SMALL FLOOR MOCK-UP - PART 1: HEAVYWEIGHT FLOOR
BS ISO 2954:2012 Mechanical vibration of rotating and reciprocating machinery. Requirements for instruments for measuring vibration severity
UNI EN 15433-4 : 2008 TRANSPORTATION LOADS - MEASUREMENT AND EVALUATION OF DYNAMIC MECHANICAL LOADS - PART 4: DATA EVALUATION
11/30206274 DC : 0 BS EN 60349-4 - ELECTRIC TRACTION ROTATING ELECTRICAL MACHINES FOR RAIL AND ROAD VEHICLES - PART 4: PERMANENT MAGNET SYNCHRONOUS ELECTRICAL MACHINES CONNECTED TO AN ELECTRONIC CONVERTER
16/30346489 DC : 0 BS ISO 20233-1 - SHIPS AND MARINE TECHNOLOGY - MODEL TEST METHOD FOR PROPELLER CAVITATION NOISE EVALUATION IN SHIP DESIGN - PART 1: SOURCE LEVEL ESTIMATION
BS EN 61043:1994 Specification for electroacoustics. Instruments for the measurement of sound intensity. Measurement with pairs of pressure sensing microphones
ANSI S12.9 PT3 : 2013 QUANTITIES AND PROCEDURES FOR DESCRIPTION AND MEASUREMENT OF ENVIRONMENTAL SOUND - PART 3: SHORT-TERM MEASUREMENTS WITH AN OBSERVER PRESENT
12/30250454 DC : 0 BS ISO 16283-1 - ACOUSTICS - FIELD MEASUREMENT OF SOUND INSULATION IN BUILDINGS AND OF BUILDING ELEMENTS - PART 1: AIRBORNE SOUND INSULATION
BS ISO 21289:2008 Mechanical vibration and shock. Parameters to be specified for the acquisition of vibration data
BS EN 54-16:2008 Fire detection and fire alarm systems Voice alarm control and indicating equipment
UNI EN ISO 10140-5 : 2014 ACOUSTICS - LABORATORY MEASUREMENT OF SOUND INSULATION OF BUILDING ELEMENTS - PART 5: REQUIREMENTS FOR TEST FACILITIES AND EQUIPMENT
DIN EN ISO 3095:2014-07 ACOUSTICS - RAILWAY APPLICATIONS - MEASUREMENT OF NOISE EMITTED BY RAILBOUND VEHICLES (ISO 3095:2013)
BS EN 60268-16:2011 Sound system equipment Objective rating of speech intelligibility by speech transmission index
UNE-EN 62585:2013 Electroacoustics - Methods to determine corrections to obtain the free-field response of a sound level meter
CEI EN 60315-4 : 1999 METHODS OF MEASUREMENT ON RADIO RECEIVERS FOR VARIOUS CLASSES OF EMISSION - PART 4: RECEIVERS FOR FREQUENCY-MODULATED SOUND BROADCASTING EMISSIONS
05/30081113 DC : DRAFT JAN 2005 ISO 140-18 - ACOUSTICS - MEASUREMENT OF SOUND INSULATION AND OF BUILDING ELEMENTS - PART 18: LABORATORY MEASUREMENT OF SOUND GENERATED BY RAINFALL ON BUILDING ELEMENTS
BS EN 60065 : 2014 AUDIO, VIDEO AND SIMILAR ELECTRONIC APPARATUS - SAFETY REQUIREMENTS (IEC 60065:2014, MODIFIED)
06/30147250 DC : DRAFT MAR 2006 EN ISO 3741 - ACOUSTICS - DETERMINATION OF SOUND POWER LEVELS AND SOUND ENERGY LEVELS OF NOISE SOURCES USING SOUND PRESSURE - PRECISION METHODS FOR REVERBERATION TEST ROOMS
I.S. EN 60349-4:2013 ELECTRIC TRACTION - ROTATING ELECTRICAL MACHINES FOR RAIL AND ROAD VEHICLES - PART 4: PERMANENT MAGNET SYNCHRONOUS ELECTRICAL MACHINES CONNECTED TO AN ELECTRONIC CONVERTER (IEC 60349-4:2012 (EQV))
UNI EN ISO 13473-5 : 2010 CHARACTERIZATION OF PAVEMENT TEXTURE BY USE OF SURFACE PROFILES - PART 5: DETERMINATION OF MEGATEXTURE
I.S. EN ISO 16283-2:2015 ACOUSTICS - FIELD MEASUREMENT OF SOUND INSULATION IN BUILDINGS AND OF BUILDING ELEMENTS - PART 2: IMPACT SOUND INSULATION (ISO/DIS 16283-2:2013)
ANSI S2.72 PT4 : 2003 (R2012) MECHANICAL VIBRATION AND SHOCK - EVALUATION OF HUMAN EXPOSURE TO WHOLE-BODY VIBRATION - PART 4: GUIDELINES FOR THE EVALUATION OF THE EFFECTS OF VIBRATION AND ROTATIONAL MOTION ON PASSENGER AND CREW COMFORT IN FIXED-GUIDEWAY TRANSPORT SYSTEMS
ISO 2631-4:2001 Mechanical vibration and shock — Evaluation of human exposure to whole-body vibration — Part 4: Guidelines for the evaluation of the effects of vibration and rotational motion on passenger and crew comfort in fixed-guideway transport systems
I.S. EN 50332-2:2013 SOUND SYSTEM EQUIPMENT: HEADPHONES AND EARPHONES ASSOCIATED WITH PERSONAL MUSIC PLAYERS - MAXIMUM SOUND PRESSURE LEVEL MEASUREMENT METHODOLOGY - PART 2: MATCHING OF SETS WITH HEADPHONES IF EITHER OR BOTH ARE OFFERED SEPARATELY, OR ARE OFFERED AS ONE PACKAGE EQUIPMENT BUT WITH STANDARDISED CONNECTORS BETWEEN THE TWO ALLOWING TO COMBINE COMPONENTS OF DIFFERENT MANUFACTURERS
NF ISO 2631-2 : 2014 MECHANICAL VIBRATION AND SHOCK - EVALUATION OF HUMAN EXPOSURE TO WHOLE-BODY VIBRATION - PART 2: VIBRATION IN BUILDINGS (1 HZ TO 80 HZ)
UNE-EN 60118-15:2012 Electroacoustics - Hearing aids - Part 15: Methods for characterising signal processing in hearing aids with a speech-like signal
I.S. EN ISO 3382-2:2008 ACOUSTICS - MEASUREMENT OF ROOM ACOUSTIC PARAMETERS - PART 2: REVERBERATION TIME IN ORDINARY ROOMS
ISO/TS 13474:2003 Acoustics Impulse sound propagation for environmental noise assessment
ISO 15619:2013 Reciprocating internal combustion engines — Measurement method for exhaust silencers — Sound power level of exhaust noise and insertion loss using sound pressure and power loss ratio
I.S. EN ISO 17201-1:2005 ACOUSTICS - NOISE FROM SHOOTING RANGES - PART 1: DETERMINATION OF MUZZLE BLAST BY MEASUREMENT
DIN EN 54-24:2008-06 FIRE DETECTION AND FIRE ALARM SYSTEMS - PART 24: COMPONENTS OF VOICE ALARM SYSTEMS - LOUDSPEAKERS
TS 103 222-1 : 1.2.1 SPEECH AND MULTIMEDIA TRANSMISSION QUALITY (STQ); REFERENCE BENCHMARKING, BACKGROUND TRAFFIC PROFILES AND KPIS; PART 1: REFERENCE BENCHMARKING, BACKGROUND TRAFFIC PROFILES AND KPIS FOR VOIP AND FOIP IN FIXED NETWORKS
I.S. EN 61996-2:2008 MARITIME NAVIGATION AND RADIOCOMMUNICATION EQUIPMENT AND SYSTEMS - SHIPBORNE VOYAGE DATA RECORDER (VDR) - PART 2: SIMPLIFIED VOYAGE DATA RECORDER (S-VDR) - PERFORMANCE REQUIREMENTS, METHODS OF TESTING AND REQUIRED TEST RESULTS
ANSI S12.51:2012 ACOUSTICS - DETERMINATION OF SOUND POWER LEVELS AND SOUND ENERGY LEVELS OF NOISE SOURCES USING SOUND PRESSURE - PRECISION METHODS FOR REVERBERATION TEST ROOMS
ANSI S12.54:2011 ACOUSTICS - DETERMINATION OF SOUND POWER LEVELS AND SOUND ENERGY LEVELS OF NOISE SOURCES USING SOUND PRESSURE - ENGINEERING METHODS FOR AN ESSENTIALLY FREE FIELD OVER A REFLECTING PLANE
ANSI/ASA S12.57 : 2011(R2016) ACOUSTICS - DETERMINATION OF SOUND POWER LEVELS AND SOUND ENERGY LEVELS OF NOISE SOURCES USING SOUND PRESSURE - ENGINEERING/SURVEY METHODS FOR USE IN SITU IN A REVERBERANT ENVIRONMENT
ANSI S12.50 : 2002 : R2012 ACOUSTICS - DETERMINATION OF SOUND POWER LEVELS OF NOISE SOURCES - GUIDELINES FOR THE USE OF BASIC STANDARDS
17/30364315 DC : 0 BS EN 1459-7 - ROUGH-TERRAIN TRUCKS - SAFETY REQUIREMENTS AND VERIFICATION - PART 7: TEST METHOD AND DETERMINATION OF NOISE EMISSION
ANSI S2.72 PT1 : 2002 : R2012 MECHANICAL VIBRATION AND SHOCK - EVALUATION OF HUMAN EXPOSURE TO WHOLE-BODY VIBRATION - PART 1: GENERAL REQUIREMENTS
ANSI S12.55 : 2012 ACOUSTICS - DETERMINATION OF SOUND POWER LEVELS AND SOUND ENERGY LEVELS OF NOISE SOURCES USING SOUND PRESSURE - PRECISION METHODS FOR ANECHOIC ROOMS AND HEMI-ANECHOIC ROOMS
ANSI/ASA S1.42 : 2001(R2016) DESIGN RESPONSE OF WEIGHTING NETWORKS FOR ACOUSTICAL MEASUREMENTS
ANSI S12.50 : 2002 : R2007 ACOUSTICS - DETERMINATION OF SOUND POWER LEVELS OF NOISE SOURCES - GUIDELINES FOR THE USE OF BASIC STANDARDS
ES 201 168 : 1.2.1 CORPORATE TELECOMMUNICATION NETWORKS (CN); TRANSMISSION CHARACTERISTICS OF DIGITAL PRIVATE BRANCH EXCHANGES (PBXS)
UNE-EN 15610:2010 Railway applications - Noise emission - Rail roughness measurement related to rolling noise generation
ANSI/ASA S12.10 PART 1 : 2010 ACOUSTICS - MEASUREMENT OF AIRBORNE NOISE EMITTED BY INFORMATION TECHNOLOGY AND TELECOMMUNICATIONS EQUIPMENT - PART 1: DETERMINATION OF SOUND POWER LEVEL AND EMISSION SOUND PRESSURE LEVEL
UNI EN ISO 17201-1 : 2006 ACOUSTICS - NOISE FROM SHOOTING RANGES - PART 1: DETERMINATION OF MUZZLE BLAST BY MEASUREMENT
EN ISO 16283-1:2014/A1:2017 ACOUSTICS - FIELD MEASUREMENT OF SOUND INSULATION IN BUILDINGS AND OF BUILDING ELEMENTS - PART 1: AIRBORNE SOUND INSULATION (ISO 16283-1:2014/AMD 1:2017)
ISO/TS 13475-2:2000 Acoustics — Stationary audible warning devices used outdoors — Part 2: Precision methods for determination of sound emission quantities
IEC PAS 61996-2:2005 Maritime navigation and radiocommunication equipment and systems - Shipborne voyage data recorder (VDR) - Part 2: Simplified voyage data recorder (S-VDR) - Performance requirements - Methods of testing and required test results
IEC 60315-4:1997 Methods of measurement on radio receivers for various classes of emission - Part 4: Receivers for frequency-modulated sound broadcasting emissions
DIN EN ISO 3743-1:2011-01 Acoustics - Determination of sound power levels and sound energy levels of noise sources using sound pressure - Engineering methods for small, movable sources in reverberant fields - Part 1: Comparison method for a hard-walled test room (ISO 3743-1:2010)
ISO 13473-2:2002 Characterization of pavement texture by use of surface profiles — Part 2: Terminology and basic requirements related to pavement texture profile analysis
EN ISO 10140-3:2010/A1:2015 ACOUSTICS - LABORATORY MEASUREMENT OF SOUND INSULATION OF BUILDING ELEMENTS - PART 3: MEASUREMENT OF IMPACT SOUND INSULATION (ISO 10140-3:2010/AMD 1:2015)
UNE-EN ISO 11201:2010 Acoustics - Noise emitted by machinery and equipment - Measurement of emission sound pressure levels at a work station and at other specified positions - Engineering method in an essentially free field over a reflecting plane (ISO 11201:1995, including Cor 1:1997)
DIN EN ISO 18233:2006-08 Acoustics - Application of new measurement methods in building and room acoustics (ISO 18233:2006)
DIN EN ISO 7731:2008-12 ERGONOMICS - DANGER SIGNALS FOR PUBLIC AND WORK AREAS - AUDITORY DANGER SIGNALS
DIN EN 15433-4 E : 2008 TRANSPORTATION LOADS - MEASUREMENT AND EVALUATION OF DYNAMIC MECHANICAL LOADS - PART 4: DATA EVALUATION
DIN EN ISO 9614-3:2009-11 Acoustics - Determination of sound power levels of noise sources using sound intensity - Part 3: Precision method for measurement by scanning (ISO 9614-3:2002)
DIN EN ISO 354 E : 2003 ACOUSTICS - MEASUREMENT OF SOUND ABSORPTION IN A REVERBERATION ROOM
IEC 61996-2:2007 Maritime navigation and radiocommunication equipment and systems - Shipborne voyage data recorder (VDR) - Part 2: Simplified voyage data recorder (S-VDR) - Performance requirements, methods of testing and required test results
BS EN ISO 11202:2010 Acoustics. Noise emitted by machinery and equipment. Determination of emission sound pressure levels at a work station and at other specified positions applying approximate environmental corrections
ISO/TS 7849-2:2009 Acoustics — Determination of airborne sound power levels emitted by machinery using vibration measurement — Part 2: Engineering method including determination of the adequate radiation factor
ISO 140-7:1998 Acoustics Measurement of sound insulation in buildings and of building elements Part 7: Field measurements of impact sound insulation of floors
UNE-EN ISO 11957:2010 Acoustics - Determination of sound insulation performance of cabins - Laboratory and in situ measurements (ISO 11957:1996)
BS EN ISO 10052 : 2004 ACOUSTICS - FIELD MEASUREMENTS OF AIRBORNE AND IMPACT SOUND INSULATION AND OF SERVICE EQUIPMENT SOUND - SURVEY METHOD
BS EN ISO 140-11:2005 Acoustics. Measurement of sound insulation in buildings and of building elements Laboratory measurements of the reduction of transmitted impact sound by floor coverings on lightweight reference floors
BS EN ISO 140-8:1998 Acoustics. Measurement of sound insulation in buildings and of building elements Laboratory measurements of the reduction of transmitted impact noise by floor coverings on a heavyweight standard floor
BS EN ISO 9614-3:2009 Acoustics. Determination of sound power levels of noise sources using sound intensity Precision method for measurement by scanning
BS EN ISO 266:1997 Acoustics. Preferred frequencies
BS EN ISO 18233:2006 Acoustics. Application of new measurement methods in building and room acoustics
BS EN ISO 11904-2:2004 Acoustics. Determination of sound immission from sound sources placed close to the ear Technique using a manikin
ISO 11201:2010 Acoustics Noise emitted by machinery and equipment Determination of emission sound pressure levels at a work station and at other specified positions in an essentially free field over a reflecting plane with negligible environmental corrections
ISO 10140-5:2010 Acoustics Laboratory measurement of sound insulation of building elements Part 5: Requirements for test facilities and equipment
ISO 8041:2005 Human response to vibration Measuring instrumentation
IEC 61043:1993 Electroacoustics - Instruments for the measurement of sound intensity - Measurements with pairs of pressure sensing microphones
NF EN 60268-16 : 2015 SOUND SYSTEM EQUIPMENT - PART 16: OBJECTIVE RATING OF SPEECH INTELLIGIBILITY BY SPEECH TRANSMISSION INDEX
DIN EN ISO 10140-5:2014-09 Acoustics - Laboratory measurement of sound insulation of building elements - Part 5: Requirements for test facilities and equipment (ISO 10140-5:2010 + Amd.1:2014) (includes Amendment A1:2014)
CEN/TS 16272-5:2014 Railway applications - Track - Noise barriers and related devices acting on airborne sound propagation - Test method for determining the acoustic performance - Part 5: Intrinsic characteristics - In situ values of sound reflection under direct sound field conditions
DIN EN ISO 3745:2017-10 ACOUSTICS - DETERMINATION OF SOUND POWER LEVELS AND SOUND ENERGY LEVELS OF NOISE SOURCES USING SOUND PRESSURE - PRECISION METHODS FOR ANECHOIC ROOMS AND HEMI-ANECHOIC ROOMS (ISO 3745:2012 + AMD 1:2017)
EN 12981:2005+A1:2009 Coating plants - Spray booths for application of organic powder coating material - Safety requirements
EN ISO 8253-3:2012 Acoustics - Audiometric test methods - Part 3: Speech audiometry (ISO 8253-3:2012)
DIN EN ISO 10140-3:2015-11 Acoustics - Laboratory measurement of sound insulation of building elements - Part 3: Measurement of impact sound insulation (ISO 10140-3:2010 + Amd. 1:2015) (includes Amendment A1:2015)
EN 61996:2000 Maritime navigation and radiocommunication equipment and systems - Shipborne voyage data recorder (VDR) - Performance requirements - Methods of testing and required test results
EN 61237-4:1997 Broadcast video tape recorders - Methods of measurement - Part 4: Analogue audio performance measurements
EN ISO 3382-3:2012 Acoustics - Measurement of room acoustic parameters - Part 3: Open plan offices (ISO 3382-3:2012)
DIN EN ISO 12001:2010-01 Acoustics - Noise emitted by machinery and equipment - Rules for the drafting and presentation of a noise test code (ISO 12001:1996)
EN 60349-4:2013 Electric traction - Rotating electrical machines for rail and road vehicles - Part 4: Permanent magnet synchronous electrical machines connected to an electronic converter
UNI EN ISO 3381 : 2011 RAILWAY APPLICATIONS - ACOUSTICS - MEASUREMENT OF NOISE INSIDE RAILBOUND VEHICLES
EN 61481-2:2014 Live working - Phase comparators - Part 2: Resistive type to be used for voltages from 1 kV to 36 kV a.c.
EN 60268-5:2003/A1:2009 SOUND SYSTEM EQUIPMENT - PART 5: LOUDSPEAKERS
EN 61606-3 : 2008 AUDIO AND AUDIOVISUAL EQUIPMENT - DIGITAL AUDIO PARTS - BASIC MEASUREMENT METHODS OF AUDIO CHARACTERISTICS - PART 3: PROFESSIONAL USE
EN 60534-8-1:2005 Industrial-process control valves - Part 8-1: Noise considerations - Laboratory measurement of noise generated by aerodynamic flow through control valves
CEN/TS 16272-7:2015 Railway applications - Track - Noise barriers and related devices acting on airborne sound propagation - Test method for determining the acoustic performance - Part 7: Extrinsic characteristics - In situ values of insertion loss
EN 60349-1:2010 Electric traction - Rotating electrical machines for rail and road vehicles - Part 1: Machines other than electronic converter-fed alternating current motors
EN 1793-4:2015 Road traffic noise reducing devices - Test method for determining the acoustic performance - Part 4: Intrinsic characteristics - In situ values of sound diffraction
DIN EN ISO 4869-3:2007-09 Acoustics - Hearing protectors - Part 3: Measurement of insertion loss of ear-muff type protectors using an acoustic test fixture (ISO 4869-3:2007); German version EN ISO 4869-3:2007
DIN EN ISO 5136:2009-11 Acoustics - Determination of sound power radiated into a duct by fans and other air-moving devices - In-duct method (ISO 5136:2003)
DIN EN ISO 11546-2:2010-01 Acoustics - Determination of sound insulation performances of enclosures - Part 2: Measurements in situ (for acceptance and verification purposes) (ISO 11546-2:1995)
DIN EN 54-16:2008-06 Fire detection and fire alarm systems - Part 16: Voice alarm control and indicating equipment
DIN EN ISO 11546-1:2010-01 Acoustics - Determination of sound insulation performances of enclosures - Part 1: Measurements under laboratory conditions (for declaration purposes) (ISO 11546-1:1995)
EN 50332-1:2013 Sound system equipment: Headphones and earphones associated with personal music players - Maximum sound pressure level measurement methodology - Part 1: General method for "one package equipment"
DIN EN ISO 140-11:2005-08 ACOUSTICS - MEASUREMENT OF SOUND INSULATION IN BUILDINGS AND OF BUILDING ELEMENTS - PART 11: LABORATORY MEASUREMENTS OF THE REDUCTION OF TRANSMITTED IMPACT SOUND BY FLOOR COVERINGS ON LIGHTWEIGHT REFERENCE FLOORS
NF EN ISO 11203 : 2009 ACOUSTICS - NOISE EMITTED BY MACHINERY AND EQUIPMENT - DETERMINATION OF EMISSION SOUND PRESSURE LEVELS AT A WORK STATION AND AT OTHER SPECIFIED POSITIONS FROM THE SOUND POWER LEVEL
EN 60704-2-3:2002/A1:2005 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - TEST CODE FOR THE DETERMINATION OF AIRBORNE ACOUSTICAL NOISE - PART 2-3: PARTICULAR REQUIREMENTS FOR DISHWASHERS
EN 60349-2:2010 ELECTRIC TRACTION - ROTATING ELECTRICAL MACHINES FOR RAIL AND ROAD VEHICLES - PART 2: ELECTRONIC CONVERTER-FED ALTERNATING CURRENT MOTORS
UNE-EN ISO 11204:2010 V2 Acoustics - Noise emitted by machinery and equipment - Determination of emission sound pressure levels at a work station and at other specified positions applying accurate environmental corrections (ISO 11204:2010)
I.S. EN ISO 16032:2004 ACOUSTICS - MEASUREMENT OF SOUND PRESSURE LEVEL FROM SERVICE EQUIPMENT IN BUILDINGS - ENGINEERING METHOD
UNE-EN ISO 11202:2010 V2 Acoustics - Noise emitted by machinery and equipment - Determination of emission sound pressure levels at a work station and at other specified positions applying approximate environmental corrections (ISO 11202:2010)
UNE-EN ISO 10819:2014 Mechanical vibration and shock - Hand-arm vibration - Measurement and evaluation of the vibration transmissibility of gloves at the palm of the hand (ISO 10819:2013)

AS 5339:2019 Acoustics - Determination of sound power levels and sound energy levels of noise sources using sound pressure - Engineering/survey methods for use in situ in a reverberant environment
ISO 266:1997 Acoustics — Preferred frequencies
AS 5336:2019 Acoustics - Determination of sound power levels and sound energy levels of noise sources using sound pressure - Precision methods for anechoic rooms and hemi - anechoic rooms
AS 5335:2019 Acoustics - Determination of sound power levels and sound energy levels of noise sources using sound pressure - Engineering methods for an essentially free field over a reflecting plane
IEC 60050-801:1994 International Electrotechnical Vocabulary (IEV) - Part 801: Acoustics and electroacoustics
AS 5333.1:2019 Acoustics - Determination of sound power levels and sound energy levels of noise sources using sound pressure - Engineering methods for small movable sources in reverberant fields Comparison method for a hard-walled test room
IEC 60801-3:1984 Electromagnetic compatibility for industrial-process measurement and control equipment - Part 3: Radiated electromagnetic field requirements
IEC 60651:1979+AMD1:1993+AMD2:2000 CSV Sound level meters
IEC 60801-2:1991 Electromagnetic compatibility for industrial-process measurement and control equipment - Part 2: Electrostatic discharge requirements
AS 5332:2019 Acoustics - Determination of sound power levels of noise sources - Guidelines for the use of basic standards
IEC 60804:2000 Integrating-averaging sound level meters

View more information
$358.06
Including GST where applicable

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.

Need help?
Call us on 131 242, then click here to start a Screen Sharing session
so we can help right away! Learn more