IEC 61291-1:2012
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Optical amplifiers - Part 1: Generic specification
Available format(s)
Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users
Language(s)
English - French
Published date
04-04-2012
Publisher
Superseded date
31-12-2021
Superseded by
$554.84
Including GST where applicable
IEC 61291-1:2012 applies to all commercially available optical amplifiers (OAs) and optically amplified assemblies. It applies to OAs using optically pumped fibres (OFAs based either on rare-earth doped fibres or on the Raman effect), semiconductors (SOAs), and waveguides (POWAs). This third edition cancels and replaces the second edition published in 2006. It is a technical revision that includes the following significant changes: the definitions related to transient behaviour have been extensively updated with terms from the 61290-4 series and the definition for gain ripple has been added.
| Committee |
TC 86/SC 86C
|
| DocumentType |
Standard
|
| Pages |
62
|
| PublisherName |
International Electrotechnical Committee
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| Standards | Relationship |
| EN 61291-1:2012 | Identical |
| EN IEC 61291-1:2018 | Identical |
| PN EN 61291-1 : 2012 | Identical |
| DIN EN 61291-1:2013-02 | Identical |
| BS EN 61291-1:2012 | Identical |
| BS EN IEC 61291-1:2018 | Identical |
| UNE-EN 61291-1:2012 | Identical |
| OVE/ONORM EN 61291-1 : 2013 | Identical |
| NEN EN IEC 61291-1 : 2012 | Identical |
| CEI EN 61291-1 : 2013 | Identical |
| CEI EN 61290-10-4 : 2008 | OPTICAL AMPLIFIERS - TEST METHODS - PART 10-4: MULTICHANNEL PARAMETERS - INTERPOLATED SOURCE SUBTRACTION METHOD USING AN OPTICAL SPECTRUM ANALYZER |
| 13/30288113 DC : 0 | BS EN 61290-1-1 - OPTICAL AMPLIFIERS - TEST METHODS - PART 1-1: POWER AND GAIN PARAMETERS - OPTICAL SPECTRUM ANALYZER METHOD |
| I.S. EN 61290-3-2:2008 | OPTICAL AMPLIFIERS - TEST METHODS - PART 3-2: NOISE FIGURE PARAMETERS - ELECTRICAL SPECTRUM ANALYZER METHOD |
| BS EN 61290-2-3:1998 | Optical fibre amplifiers. Basic specification Test methods for optical power parameters. Optical power meter |
| IEC TR 61292-9:2017 | Optical amplifiers - Part 9: Semiconductor optical amplifiers (SOAs) |
| 95/209463 DC : DRAFT JULY 1995 | IEC 86/87/CDV-1 AND CDV-2 - FIBER OPTIC TERMINOLOGY |
| 09/30205272 DC : 0 | BS EN 61290-4-2 - OPTICAL AMPLIFIERS - TEST METHODS - PART 4-2: GAIN TRANSIENT PARAMETERS - BROADBAND SOURCE METHOD |
| I.S. EN 61290-5-2:2004 | OPTICAL AMPLIFIERS - TEST METHODS - PART 5-2: REFLECTANCE PARAMETERS - ELECTRICAL SPECTRUM ANALYSER METHOD |
| 06/30154856 DC : DRAFT AUG 2006 | EN 61291-2 - OPTICAL AMPLIFIERS - PART 2: DIGITAL APPLICATIONS - PERFORMANCE SPECIFICATION TEMPLATE |
| BS EN 61290-2-1:1998 | Optical fibre amplifiers. Basic specification Test methods for optical power parameters. Optical spectrum analyzer |
| 09/30205262 DC : 0 | BS EN 61290-4-1 - OPTICAL AMPLIFIERS - TEST METHODS - PART 4-1: GAIN TRANSIENT PARAMETERS - TWO-WAVELENGTH METHOD |
| CEI EN 61291-5-2 : 2005 | OPTICAL AMPLIFIERS - PART 5-2: QUALIFICATION SPECIFICATIONS - RELIABILITY QUALIFICATION FOR OPTICAL FIBRE AMPLIFIERS |
| 07/30170378 DC : DRAFT AUG 2007 | BS EN 61290-10-1 - OPTICAL AMPLIFIER TEST METHODS - PART 10-1: MULTICHANNEL PARAMETERS - PULSE METHOD USING AN OPTICAL SWITCH AND OPTICAL SPECTRUM ANALYZER |
| BS EN 61281-1:1999 | Fibre optic communication subsystems Generic specification |
| I.S. EN 61290-3:2008 | OPTICAL AMPLIFIERS - TEST METHODS - PART 3: NOISE FIGURE PARAMETERS |
| NF EN 61290 2-1 : 1998 | OPTICAL FIBRE AMPLIFIERS - BASIC SPECIFICATION - PART 2-1: TEST METHODS FOR OPTICAL POWER PARAMETERS - OPTICAL SPECTRUM ANALYZER |
| CEI EN 61291-4 : 2012 | OPTICAL AMPLIFIERS - PART 4: MULTICHANNEL APPLICATIONS - PERFORMANCE SPECIFICATION TEMPLATE |
| EN 61290-5-3:2002 | Optical fibre amplifiers - Basic specification - Part 5-3: Test methods for reflectance parameters - Reflectance tolerance using an electrical spectrum analyser |
| EN 61290-5-2:2004 | Optical amplifiers - Test methods - Part 5-2: Reflectance parameters - Electrical spectrum analyser method |
| EN 61291-2:2016 | Optical amplifiers - Part 2: Single channel applications - Performance specification template |
| EN 61290-2-1 : 1998 | OPTICAL FIBRE AMPLIFIERS - BASIC SPECIFICATION - TEST METHODS FOR OPTICAL POWER PARAMETERS - OPTICAL SPECTRUM ANALYZER |
| EN 61290-10-2:2008 | Optical amplifiers - Test methods - Part 10-2: Multichannel parameters - Pulse method using a gated optical spectrum analyzer |
| EN 60728-13:2010 | Cable networks for television signals, sound signals and interactive services - Part 13: Optical systems for broadcast signal transmissions |
| EN 61290-1:2015 | Optical amplifiers - Test methods - Part 1: Power and gain parameters |
| EN 61291-4:2012 | Optical amplifiers - Part 4: Multichannel applications - Performance specification template |
| EN 61290-4-3:2015 | Optical amplifiers - Test methods - Part 4-3: Power transient parameters - Single channel optical amplifiers in output power control |
| EN 61290-7-1:2007 | Optical amplifiers - Test methods - Part 7-1: Out-of-band insertion losses - Filtered optical power meter method |
| EN 61291-5-2:2017 | Optical amplifiers - Part 5-2: Qualification specifications - Reliability qualification for optical fibre amplifiers |
| BS EN 60728-13:2010 | Cable networks for television signals, sound signals and interactive services Optical systems for broadcast signal transmissions |
| CEI EN 61290-11-2 : 2006 | OPTICAL AMPLIFIERS - TEST METHODS - PART 11-2: POLARIZATION MODE DISPERSION PARAMETER - POINCARE SPHERE ANALYSIS METHOD |
| BS EN 50152-3-2:2016 | Railway applications. Fixed installations. Particular requirements for a.c. switchgear Measurement, control and protection devices for specific use in a.c. traction systems. Current transformers |
| BS EN 61290-3-2:2008 | Optical amplifiers. Test methods Noise figure parameters. Electrical spectrum analyzer method |
| 13/30285534 DC : 0 | BS EN 61290-1 - OPTICAL AMPLIFIERS - TEST METHODS - PART 1: OPTICAL POWER AND GAIN PARAMETERS |
| BS EN 61290-3-3:2014 | Optical amplifiers. Test methods Noise figure parameters. Signal power to total ASE power ratio |
| PD IEC TR 61282-1:2000 | Fibre optic communication system design guides Single-mode digital and analogue systems |
| 17/30335815 DC : 0 | BS EN 61281-1 ED 2.0 - FIBRE OPTIC COMMUNICATION SUBSYSTEMS PART 1: GENERIC SPECIFICATION |
| BS EN 61290-10-5:2014 | Optical amplifiers. Test methods Multichannel parameters. Distributed Raman amplifier gain and noise figure |
| 15/30318620 DC : 0 | BS EN 61291-2 ED 4.0 - OPTICAL AMPLIFIERS - PART 2: SINGLE CHANNEL APPLICATIONS - PERFORMANCE SPECIFICATION TEMPLATE |
| BS EN 61290-5-2:2004 | Optical fibre amplifiers. Basic specification. Test methods for reflectance parameters Electrical spectrum analyser method |
| I.S. EN 61290-11-2:2005 | OPTICAL AMPLIFIERS - TEST METHODS - PART 11-2: POLARIZATION MODE DISPERSION PARAMETER - POINCARE SPHERE ANALYSIS METHOD |
| PD IEC/TR 61292-6:2010 | Optical amplifiers Distributed Raman amplification |
| BS EN 61290-5-3:2002 | Optical fibre amplifiers. Basic specification. Test methods for reflectance parameters Reflectance tolerance using an electrical spectrum analyser |
| 07/30163795 DC : 0 | BS EN 61290-11-1 - OPTICAL AMPLIFIERS. TEST METHODS - PART 11-1: POLARIZATION MODE DISPERSION - JONES MATRIX EIGENANALYSIS (JME) |
| BS EN 61290-5-1:2006 | Optical amplifiers. Test methods Reflectance parameters. Optical spectrum analyzer method |
| 17/30363220 DC : 0 | BS EN 61290-4-3 ED.2.0 - OPTICAL AMPLIFIERS - TEST METHODS - PART 4-3: POWER TRANSIENT PARAMETERS - SINGLE CHANNEL OPTICAL AMPLIFIERS IN OUTPUT POWER CONTROL |
| BS EN 61291-2:2016 | Optical amplifiers Single channel applications. Performance specification template |
| BS EN 61290-7-1:2007 | Optical amplifiers. Test methods Out-of-band insertion losses. Filtered optical power meter method |
| I.S. EN 61290-3-3:2014 | OPTICAL AMPLIFIERS - TEST METHODS - PART 3-3: NOISE FIGURE PARAMETERS - SIGNAL POWER TO TOTAL ASE POWER RATIO |
| 98/260896 DC : DRAFT MAR 1998 | IEC 61291-3 ED. 1 - PERFORMANCE SPECIFICATION TEMPLATE ON OPTICAL AMPLIFIERS - PART 3: OPTICAL FIBRE AMPLIFIERS FOR ANALOGUE APPLICATIONS |
| BS EN 61290-4-1:2016 | Optical amplifiers. Test methods Gain transient parameters. Two-wavelength method |
| BS EN 61290-10-2:2008 | Optical amplifiers. Test methods Multichannel parameters. Pulse method using a gated optical spectrum analyzer |
| BS EN 61290-1-2:2005 | Optical amplifiers. Test methods Power and gain parameters - Electrical spectrum analyzer method |
| 05/30134985 DC : DRAFT JUN 2005 | IEC 61290-1-1 ED 2 - OPTICAL AMPLIFIER TEST METHODS - PART 1-1: OPTICAL POWER AND GAIN PARAMETERS - OPTICAL SPECTRUM ANALYZER METHOD |
| 98/261559 DC : DRAFT MAY 1998 | IEC 61290-3 EDITION 1 - BASIC SPECIFICATION FOR OPTICAL FIBRE AMPLIFIER TEST METHODS - PART 3-1: TEST METHODS FOR NOISE FIGURE PARAMETERS - OPTICAL SPECTRUM ANALYZER TEST METHOD |
| 06/30154851 DC : DRAFT AUG 2006 | EN 61290-7-1 - OPTICAL AMPLIFIERS - TEST METHODS - PART 7-1: OUT-OF-BAND INSERTION LOSSES - FILTERED OPTICAL POWER METER METHOD |
| CEI EN 61290-1-2 : 2006 | OPTICAL AMPLIFIERS - TEST METHODS - PART 1-2: POWER AND GAIN PARAMETERS - ELECTRICAL SPECTRUM ANALYZER METHOD |
| NF EN 61290-4-2 : 2011 | OPTICAL AMPLIFIERS - TEST METHODS - PART 4-2: GAIN TRANSIENT PARAMETERS - BROADBAND SOURCE METHOD |
| I.S. EN 61291-4:2012 | OPTICAL AMPLIFIERS - PART 4: MULTICHANNEL APPLICATIONS - PERFORMANCE SPECIFICATION TEMPLATE (IEC 61291-4:2011 (EQV)) |
| I.S. EN 61290-1-1:2015 | OPTICAL AMPLIFIERS - TEST METHODS - PART 1-1: POWER AND GAIN PARAMETERS - OPTICAL SPECTRUM ANALYZER METHOD |
| IEC 61291-5-2:2017 | Optical amplifiers - Part 5-2: Qualification specifications - Reliability qualification for optical fibre amplifiers |
| CEI EN 61290-3-2 : 2010 | OPTICAL AMPLIFIERS - TEST METHODS - PART 3-2: NOISE FIGURE PARAMETERS - ELECTRICAL SPECTRUM ANALYZER METHOD |
| I.S. EN 61290-10-1:2009 | OPTICAL AMPLIFIERS - TEST METHODS - PART 10-1: MULTICHANNEL PARAMETERS - PULSE METHOD USING AN OPTICAL SWITCH AND OPTICAL SPECTRUM ANALYZER |
| CEI EN 60728-6 : 2012 | CABLE NETWORKS FOR TELEVISION SIGNALS, SOUND SIGNALS AND INTERACTIVE SERVICES - PART 6: OPTICAL EQUIPMENT |
| I.S. EN 61291-2:2016 | OPTICAL AMPLIFIERS - PART 2: SINGLE CHANNEL APPLICATIONS - PERFORMANCE SPECIFICATION TEMPLATE |
| I.S. EN 61290-7-1:2007 | OPTICAL AMPLIFIERS - TEST METHODS - PART 7-1: OUT-OF-BAND INSERTION LOSSES - FILTERED OPTICAL POWER METER METHOD |
| EN 61290-1-3:2015 | Optical amplifiers - Test methods - Part 1-3: Power and gain parameters - Optical power meter method |
| I.S. EN 60728-13-1:2017 | CABLE NETWORKS FOR TELEVISION SIGNALS, SOUND SIGNALS AND INTERACTIVE SERVICES - PART 13-1: BANDWIDTH EXPANSION FOR BROADCAST SIGNAL OVER FTTH SYSTEM |
| IEC 60728-13-1:2017 | Cable networks for television signals, sound signals and interactive services - Part 13-1: Bandwidth expansion for broadcast signal over FTTH system |
| BS EN 61290-10-3:2003 | Optical amplifiers. Test methods Multichannel parameters. Probe methods |
| BS EN 61290-10-1:2009 | Optical amplifiers. Test methods Multichannel parameters. Pulse method using an optical switch and optical spectrum analyzer |
| BS EN 61291-4:2012 | Optical amplifiers Multichannel applications. Performance specification template |
| BS EN 61290-1-1:2015 | Optical amplifiers. Test methods Power and gain parameters. Optical spectrum analyzer method |
| I.S. EN 61290-1-2:2006 | OPTICAL AMPLIFIERS - TEST METHODS - PART 1-2: POWER AND GAIN PARAMETERS - ELECTRICAL SPECTRUM ANALYZER METHOD |
| 05/30134734 DC : DRAFT JUN 2005 | IEC 61290-5-1 - OPTICAL AMPLIFIER TEST METHODS - PART 5-1: REFLECTANCE PARAMETERS - OPTICAL SPECTRUM ANALYZER METHOD |
| 02/203702 DC : DRAFT APR 2002 | IEC 61292-2 TR - OPTICAL AMPLIFIERS - PART 2: THEORETICAL BACKGROUND FOR NOISE FIGURE EVALUATION USING THE ELECTRICAL SPECTRUM ANALYSER |
| ISO 20780:2018 | Space systems — Fiber optic components — Design and verification requirements |
| EN 60728-13-1:2017 | Cable networks for television signals, sound signals and interactive services - Part 13-1: Bandwidth expansion for broadcast signal over FTTH system |
| BS EN 61290-4-3:2015 | Optical amplifiers. Test methods Power transient parameters. Single channel optical amplifiers in output power control |
| BS EN IEC 61281-1:2018 | Fibre optic communication subsystems Generic specification |
| CEI EN 61290-10-2 : 2010 | OPTICAL AMPLIFIERS - TEST METHODS - PART 10-2: MULTICHANNEL PARAMETERS - PULSE METHOD USING A GATED OPTICAL SPECTRUM ANALYZER |
| 11/30241813 DC : 0 | BS EN 61291-4 - OPTICAL AMPLIFIERS - PART 4: MULTICHANNEL APPLICATIONS - PERFORMANCE SPECIFICATION TEMPLATE |
| 03/309966 DC : DRAFT JULY 2003 | IEC 61290-11-2 - OPTICAL AMPLIFIER TEST METHODS - PART 11-2: POLARISATION MODE DISPERSION - POINCARE SPHERE ANALYSIS METHOD |
| CEI EN 61281-1 : 2001 | FIBRE OPTIC COMMUNICATION SUBSYSTEMS - PART 1:GENERIC SPECIFICATION |
| DD IEC/PAS 61290-3-1:2002 | Optical fibre amplifiers. Basic specification. Test methods for noise figure parameters Optical spectrum analyzer |
| 15/30294923 DC : 0 | BS EN 61291-5-2 ED2.0 - OPTICAL AMPLIFIERS - PART 5-2: QUALIFICATION SPECIFICATIONS - RELIABILITY QUALIFICATION FOR OPTICAL FIBRE AMPLIFIERS |
| 06/30156997 DC : 0 | BS EN 61290-10-2 - OPTICAL AMPLIFIERS - TEST METHODS - PART 10-2: MULTICHANNEL PARAMETERS - PULSE METHOD USING A GATED OPTICAL SPECTRUM ANALYZER |
| 07/30163800 DC : 0 | BS EN 61290-3 - OPTICAL AMPLIFIERS - TEST METHODS - PART 3: NOISE FIGURE PARAMETERS |
| 13/30269514 DC : 0 | BS EN 61290-10-5 - OPTICAL AMPLIFIERS - TEST METHODS - PART 10-5: MULTICHANNEL PARAMETERS - DISTRIBUTED RAMAN AMPLIFIER GAIN AND NOISE FIGURE |
| CEI EN 60728-13 : 2010 | CABLE NETWORKS FOR TELEVISION SIGNALS, SOUND SIGNALS AND INTERACTIVE SERVICES - PART 13: OPTICAL SYSTEMS FOR BROADCAST SIGNAL TRANSMISSIONS |
| BS EN 61290-6-1:1998 | Optical fibre amplifiers. Basic specification Test methods for pump leakage parameters. Optical demultiplexer |
| 04/30110918 DC : DRAFT MAR 2004 | IEC 61290-1-2 ED 2.0 - OPTICAL AMPLIFIER TEST METHODS - PART 1-2: OPTICAL POWER AND GAIN PARAMETERS - ELECTRICAL SPECTRUM ANALYZER METHOD |
| IEC 61290-4-4:2018 | Optical amplifiers - Test methods - Part 4-4: Gain transient parameters - Single channel optical amplifiers with gain control |
| CEI EN 61290-3-3 : 2014 | OPTICAL AMPLIFIERS - TEST METHODS - PART 3-3: NOISE FIGURE PARAMETERS - SIGNAL POWER TO TOTAL ASE POWER RATIO |
| CEI EN 61290-5-1 : 2007 | OPTICAL AMPLIFIERS - TEST METHODS - PART 5-1: REFLECTANCE PARAMETERS - OPTICAL SPECTRUM ANALYZER METHOD |
| BS EN 61290-11-1:2008 | Optical amplifiers. Test methods Polarization mode dispersion parameter. Jones matrix eigenanalysis (JME) |
| I.S. EN 61290-10-2:2008 | OPTICAL AMPLIFIERS - TEST METHODS - PART 10-2: MULTICHANNEL PARAMETERS - PULSE METHOD USING A GATED OPTICAL SPECTRUM ANALYZER |
| I.S. EN 61290-1-3:2015 | OPTICAL AMPLIFIERS - TEST METHODS - PART 1-3: POWER AND GAIN PARAMETERS - OPTICAL POWER METER METHOD |
| IEC PAS 61290-3-1:2002 | Optical fibre amplifiers - Basic specification - Part 3-1: Test methods for noise figure parameters - Optical spectrum analyzer |
| IEC 61290-10-4:2007 | Optical amplifiers - Test methods - Part 10-4: Multichannel parameters - Interpolated source subtraction method using an optical spectrum analyzer |
| IEC 61290-3-2:2008 | Optical amplifiers - Test methods - Part 3-2: Noise figure parameters - Electrical spectrum analyzer method |
| IEC 61290-10-1:2009 | Optical amplifiers - Test methods - Part 10-1: Multichannel parameters - Pulse method using an optical switch and optical spectrum analyzer |
| EN 61290-1-1:2015 | Optical amplifiers - Test methods - Part 1-1: Power and gain parameters - Optical spectrum analyzer method |
| EN 61290-11-1:2008 | Optical amplifiers - Test methods - Part 11-1: Polarization mode dispersion parameter - Jones matrix eigenanalysis (JME) |
| CEI EN 61290-4-1 : 2012 | OPTICAL AMPLIFIERS - TEST METHODS - PART 4-1: GAIN TRANSIENT PARAMETERS - TWO-WAVELENGTH METHOD |
| I.S. EN 61290-4-3:2015 | OPTICAL AMPLIFIERS - TEST METHODS - PART 4-3: POWER TRANSIENT PARAMETERS - SINGLE CHANNEL OPTICAL AMPLIFIERS IN OUTPUT POWER CONTROL |
| CEI EN 61290-6-1 : 1999 | OPTICAL FIBRE AMPLIFIERS - BASIC SPECIFICATION - TEST METHODS FOR PUMP LEAKAGE PARAMETERS - OPTICAL DEMULTIPLEXER |
| EN IEC 61281-1:2018 | Fibre optic communication subsystems - Part 1: Generic specification |
| BS EN 60728-6:2011 | Cable networks for television signals, sound signals and interactive services Optical equipment |
| 17/30361911 DC : DRAFT JUL 2017 | BS EN 61290-4-4 - OPTICAL AMPLIFIERS - TEST METHODS - PART 4-4: GAIN TRANSIENT PARAMETERS - SINGLE CHANNEL OPTICAL AMPLIFIERS WITH GAIN CONTROL |
| PD IEC TR 61292-2:2003 | Optical amplifier technical reports Theoretical background for noise figure evaluation using the electrical spectrum analyzer |
| BS EN 61290-4-2:2011 | Optical amplifiers. Test methods Gain transient parameters. Broadband source method |
| NF EN 61290-1 : 2015 | OPTICAL AMPLIFIERS - TEST METHODS - PART 1: POWER AND GAIN PARAMETERS |
| 12/30260284 DC : 0 | BS EN 61290-3-3 - OPTICAL AMPLIFIERS - TEST METHODS - PART 3-3: NOISE FIGURE PARAMETERS - SIGNAL POWER TO TOTAL ASE POWER RATIO |
| 11/30249637 DC : 0 | BS EN 61291-2 - OPTICAL AMPLIFIERS - PART 2: DIGITAL APPLICATIONS - PERFORMANCE SPECIFICATION TEMPLATE SPECIFICATION TEMPLATE |
| BS EN 61290-1:2015 | Optical amplifiers. Test methods Power and gain parameters |
| NF EN 61291 5-2 : 2003 | OPTICAL AMPLIFIERS - PART 5-2: QUALIFICATION SPECIFICATIONS - RELIABILITY QUALIFICATION FOR OPTICAL FIBRE AMPLIFIERS |
| PD IEC/TR 61292-7:2011 | Optical amplifiers Four wave mixing effect in optical amplifiers |
| 05/30134720 DC : DRAFT JUN 2005 | IEC 61290-5-1 - OPTICAL AMPLIFIER TEST METHODS - PART 5-1: REFLECTANCE PARAMETERS - OPTICAL SPECTRUM ANALYZER METHOD |
| 13/30284148 DC : 0 | BS EN 61290-4-3 - OPTICAL AMPLIFIERS - TEST METHODS - PART 4-3: POWER TRANSIENT PARAMETERS IN SINGLE CHANNEL OPTICAL FIBRE AMPLIFIERS WITH OUTPUT POWER CONTROL |
| BS EN 61290-10-4:2007 | Optical amplifiers. Test methods Multichannel parameters. Interpolated source subtraction method using an optical spectrum analyzer |
| CEI EN 61290-2-2 : 1999 | OPTICAL FIBRE AMPLIFIERS - BASIC SPECIFICATION - PART 2-2: TEST METHODS FOR OPTICAL POWER PARAMETERS - ELECTRICAL SPECTRUM ANALYZER |
| BS EN 61290-3-1:2003 | Optical fibre amplifiers. Basic specification. Test methods for noise figure parameters Optical spectrum analyzer method |
| NF EN 61290-3-3 : 2014 | OPTICAL AMPLIFIERS - TEST METHODS - PART 3-3: NOISE FIGURE PARAMETERS - SIGNAL POWER TO TOTAL ASE POWER RATIO |
| I.S. EN 60728-6:2011 | CABLE NETWORKS FOR TELEVISION SIGNALS, SOUND SIGNALS AND INTERACTIVE SERVICES - PART 6: OPTICAL EQUIPMENT |
| I.S. EN 61290-4-2:2011 | OPTICAL AMPLIFIERS - TEST METHODS - PART 4-2: GAIN TRANSIENT PARAMETERS - BROADBAND SOURCE METHOD (IEC 61290-4-2:2011 (EQV)) |
| IEC 61281-1:2017 | Fibre optic communication subsystems - Part 1: Generic specification |
| I.S. EN 61290-3-1:2003 | OPTICAL AMPLIFIERS - TEST METHODS - PART 3-1: NOISE FIGURE PARAMETERS - OPTICAL SPECTRUM ANALYZER METHOD |
| CEI EN 61290-7-1 : 2008 | OPTICAL AMPLIFIERS - TEST METHODS - PART 7-1: OUT-OF-BAND INSERTION LOSSES - FILTERED OPTICAL POWER METER METHOD |
| I.S. EN 61291-5-2:2017 | OPTICAL AMPLIFIERS - PART 5-2: QUALIFICATION SPECIFICATIONS - RELIABILITY QUALIFICATION FOR OPTICAL FIBRE AMPLIFIERS |
| I.S. EN 61290-10-5:2014 | OPTICAL AMPLIFIERS - TEST METHODS - PART 10-5: MULTICHANNEL PARAMETERS - DISTRIBUTED RAMAN AMPLIFIER GAIN AND NOISE FIGURE |
| I.S. EN 61290-5-3:2002 | OPTICAL FIBRE AMPLIFIERS - BASIC SPECIFICATION - PART 5-3: TEST METHODS FOR REFLECTANCE PARAMETERS - REFLECTANCE TOLERANCE USING AN ELECTRICAL SPECTRUM ANALYSER |
| IEC 61290-2-1:1998 | Optical fibre amplifiers - Basic specification - Part 2-1: Test methods for optical power parameters - Optical spectrum analyzer |
| IEC 60728-13:2010 | Cable networks for television signals, sound signals and interactive services - Part 13: Optical systems for broadcast signal transmissions |
| IEC 61291-2:2016 | Optical amplifiers - Part 2: Single channel applications - Performance specification template |
| IEC 61290-11-1:2008 | Optical amplifiers - Test methods - Part 11-1: Polarization mode dispersion parameter - Jones matrix eigenanalysis (JME) |
| IEC 61290-2-2:1998 | Optical fibre amplifiers - Basic specification - Part 2-2: Test methods for optical power parameters - Electrical spectrum analyzer |
| IEC 61290-5-2:2003 | Optical amplifiers - Test methods - Part 5-2: Reflectance parameters - Electrical spectrum analyser method |
| IEC 61290-3-1:2003 | Optical amplifiers - Test methods - Part 3-1: Noise figure parameters - Optical spectrum analyzer method |
| IEC 61290-4-2:2011 | Optical amplifiers - Test methods - Part 4-2: Gain transient parameters - Broadband source method |
| IEC 61291-4:2011 | Optical amplifiers - Part 4: Multichannel applications - Performance specification template |
| IEC 60728-6:2011 | Cable networks for television signals, sound signals and interactive services - Part 6: Optical equipment |
| IEC 61290-1-3:2015 | Optical amplifiers - Test methods - Part 1-3: Power and gain parameters - Optical power meter method |
| IEC 61290-10-5:2014 | Optical amplifiers - Test methods - Part 10-5: Multichannel parameters - Distributed Raman amplifier gain and noise figure |
| IEC 61290-5-1:2006 | Optical amplifiers - Test methods - Part 5-1: Reflectance parameters - Optical spectrum analyzer method |
| IEC 61290-4-1:2016 | Optical amplifiers - Test methods - Part 4-1: Gain transient parameters - Two-wavelength method |
| IEC 61290-3-3:2013 | Optical amplifiers - Test methods - Part 3-3: Noise figure parameters - Signal power to total ASE power ratio |
| IEC 61290-10-2:2007 | Optical amplifiers - Test methods - Part 10-2: Multichannel parameters - Pulse method using a gated optical spectrum analyzer |
| IEC 61290-11-2:2005 | Optical amplifiers - Test methods - Part 11-2: Polarization mode dispersion parameter - Poincaré sphere analysis method |
| IEC 61290-3:2008 | Optical amplifiers - Test methods - Part 3: Noise figure parameters |
| IEC 61290-7-1:2007 | Optical amplifiers - Test methods - Part 7-1: Out-of-band insertion losses - Filtered optical power meter method |
| IEC 61290-1-2:2005 | Optical amplifiers - Test methods - Part 1-2: Power and gain parameters - Electrical spectrum analyzer method |
| I.S. EN IEC 61281-1:2018 | FIBRE OPTIC COMMUNICATION SUBSYSTEMS - PART 1: GENERIC SPECIFICATION |
| BS EN 61290-11-2:2005 | Optical amplifiers. Test methods Polarization mode dispersion parameter - Poincaré sphere analysis method |
| I.S. EN 60728-13:2010 | CABLE NETWORKS FOR TELEVISION SIGNALS, SOUND SIGNALS AND INTERACTIVE SERVICES - PART 13: OPTICAL SYSTEMS FOR BROADCAST SIGNAL TRANSMISSIONS |
| BS EN 61290-1-3:2015 | Optical amplifiers. Test methods Power and gain parameters. Optical power meter method |
| BS EN 60728-13-1:2017 | Cable networks for television signals, sound signals and interactive services Bandwidth expansion for broadcast signal over FTTH system |
| IEC TR 61292-6:2010 | Optical amplifiers - Part 6: Distributed Raman amplification |
| 14/30296100 DC : 0 | BS EN 61290-1-3 - OPTICAL AMPLIFIERS - TEST METHODS - PART 1-3: OPTICAL POWER AND GAIN PARAMETERS - OPTICAL POWER METER METHOD |
| CEI EN 61290-10-1 : 2010 | OPTICAL AMPLIFIERS - TEST METHODS - PART 10-1: MULTICHANNEL PARAMETERS - PULSE METHOD USING AN OPTICAL SWITCH AND OPTICAL SPECTRUM ANALYZER |
| 08/30185648 DC : 0 | BS EN 60728-13 - CABLE NETWORKS FOR TELEVISION SIGNALS, SOUND SIGNALS AND INTERACTIVE SERVICES - PART 13: OPTICAL SYSTEMS FOR BROADCAST SIGNAL TRANSMISSIONS |
| 15/30318626 DC : 0 | BS EN 61290-4-1 ED. 2.0 - OPTICAL AMPLIFIERS - TEST METHODS - PART 4-1: GAIN TRANSIENT PARAMETERS - TWO-WAVELENGTH METHOD |
| I.S. EN 61290-5-1:2006 | OPTICAL AMPLIFIERS - TEST METHODS - PART 5-1: REFLECTANCE PARAMETERS - OPTICAL SPECTRUM ANALYZER METHOD |
| CEI EN 61290-11-1 : 2010 | OPTICAL AMPLIFIERS - TEST METHODS - PART 11-1: POLARIZATION MODE DISPERSION PARAMETER - JONES MATRIX EIGENANALYSIS (JME) |
| BS EN 61290-3:2008 | Optical amplifiers. Test methods Noise figure parameters |
| IEC TR 61282-1:2000 | Fibre optic communication system design guides - Part 1: Single-mode digital and analogue systems |
| 98/263682 DC : DRAFT SEP 1998 | PREN 50309 - OPTICAL FIBRE AMPLIFIER RELIABILITY STANDARD |
| CEI EN 61290-3 : 2010 | OPTICAL AMPLIFIERS - TEST METHODS - PART 3: NOISE FIGURE PARAMETERS |
| I.S. EN 61290-4-1:2016 | OPTICAL AMPLIFIERS - TEST METHODS - PART 4-1: GAIN TRANSIENT PARAMETERS - TWO-WAVELENGTH METHOD |
| I.S. EN 61290-11-1:2008 | OPTICAL AMPLIFIERS - TEST METHODS - PART 11-1: POLARIZATION MODE DISPERSION PARAMETER - JONES MATRIX EIGENANALYSIS (JME) |
| I.S. EN 61290-1:2015 | OPTICAL AMPLIFIERS - TEST METHODS - PART 1: POWER AND GAINPARAMETERS |
| CEI EN 61290-4-2 : 2012 | OPTICAL AMPLIFIERS - TEST METHODS - PART 4-2: GAIN TRANSIENT PARAMETERS - BROADBAND SOURCE METHOD |
| CEI EN 61290-2-3 : 1999 | OPTICAL FIBRE AMPLIFIERS - BASIC SPECIFICATION - PARTS 2-3: TEST METHODS FOR OPTICAL POWER PARAMETERS - OPTICAL POWER METER |
| I.S. EN 61290-10-3:2003 | OPTICAL AMPLIFIERS - TEST METHODS - PART 10-3: MULTICHANNEL PARAMETERS - PROBE METHODS |
| IEC TR 61292-7:2011 | Optical amplifiers - Part 7: Four wave mixing effect in optical amplifiers |
| IEC TR 61292-2:2003 | Optical amplifier technical reports - Part 2: Theoretical background for noise figure evaluation using the electrical spectrum analyzer |
| I.S. EN 61290-10-4:2007 | OPTICAL AMPLIFIERS - TEST METHODS - PART 10-4: MULTICHANNEL PARAMETERS - INTERPOLATED SOURCE SUBTRACTION METHOD USING AN OPTICAL SPECTRUM ANALYZER |
| EN 61290-4-1:2016 | Optical amplifiers - Test methods - Part 4-1: Gain transient parameters - Two-wavelength method |
| IEC 61290-6-1:1998 | Optical fibre amplifiers - Basic specification - Part 6-1: Test methods for pump leakage parameters - Optical demultiplexer |
| IEC 61290-1:2014 | Optical amplifiers - Test methods - Part 1: Power and gain parameters |
| IEC 61290-1-1:2015 | Optical amplifiers - Test methods - Part 1-1: Power and gain parameters - Optical spectrum analyzer method |
| IEC 61290-2-3:1998 | Optical fibre amplifiers - Basic specification - Part 2-3: Test methods for optical power parameters - Optical power meter |
| IEC 61290-10-3:2002 | Optical amplifiers - Test methods - Part 10-3: Multichannel parameters - Probe methods |
| IEC 61290-5-3:2002 | Basic specification for optical amplifier test methods - Part 5-3: Test methods for reflectance parameters - Reflectance tolerance test method using electrical spectrum analyzer |
| EN 61290-10-5:2014 | Optical amplifiers - Test methods - Part 10-5: Multichannel parameters - Distributed Raman amplifier gain and noise figure |
| EN 61290-10-3:2003 | Optical amplifiers - Test methods - Part 10-3: Multichannel parameters - Probe methods |
| EN 61290-10-1:2009 | Optical amplifiers - Test methods - Part 10-1: Multichannel parameters - Pulse method using an optical switch and optical spectrum analyzer |
| EN 61290-3-1:2003 | Optical amplifiers - Test methods - Part 3-1: Noise figure parameters - Optical spectrum analyzer method |
| EN 61290-4-2:2011 | Optical amplifiers - Test methods - Part 4-2: Gain transient parameters - Broadband source method |
| EN 61290-6-1:1998 | Optical fibre amplifiers - Basic specification - Part 6-1: Test methods for pump leakage parameters - Optical demultiplexer |
| EN 61290-3-3:2014 | Optical amplifiers - Test methods - Part 3-3: Noise figure parameters - Signal power to total ASE power ratio |
| EN 61290-1-2:2005 | Optical amplifiers - Test methods - Part 1-2: Power and gain parameters - Electrical spectrum analyzer method |
| EN 61290-3-2:2008 | Optical amplifiers - Test methods - Part 3-2: Noise figure parameters - Electrical spectrum analyzer method |
| EN 60728-6:2011 | Cable networks for television signals, sound signals and interactive services - Part 6: Optical equipment |
| EN 61290-3:2008 | Optical amplifiers - Test methods - Part 3: Noise figure parameters |
| EN 61290-11-2:2005 | Optical amplifiers - Test methods - Part 11-2: Polarization mode dispersion parameter - Poincaré sphere analysis method |
| EN 61290-2-3 : 1998 | OPTICAL FIBRE AMPLIFIERS - BASIC SPECIFICATION - TEST METHODS FOR OPTICAL POWER PARAMETERS - OPTICAL POWER METER |
| EN 61290-10-4:2007 | Optical amplifiers - Test methods - Part 10-4: Multichannel parameters - Interpolated source subtraction method using an optical spectrum analyzer |
| EN 61290-5-1:2006 | Optical amplifiers - Test methods - Part 5-1: Reflectance parameters - Optical spectrum analyzer method |
Summarise
$554.84
Including GST where applicable
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.