ISO 10474:2013
Current
Current
The latest, up-to-date edition.
Steel and steel products — Inspection documents
Available format(s)
Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users
Language(s)
English, Russian
Published date
21-06-2013
$93.90
Including GST where applicable
ISO 10474:2013 defines the different types of inspection documents supplied to the purchaser, in accordance with the requirements of the order, for the delivery of steel products.
ISO 10474:2013 is to be used in conjunction with other International Standards which specify the general technical delivery conditions:
? for steel and steel products, see ISO 404;
? for steel castings, see ISO 4990.
| Committee |
ISO/TC 17/SC 20
|
| DevelopmentNote |
Supersedes ISO/DIS 10474. (06/2013)
|
| DocumentType |
Standard
|
| Pages |
4
|
| ProductNote |
This standard also refers to ISO/NP 16228
|
| PublisherName |
International Organization for Standardization
|
| Status |
Current
|
| Supersedes |
| Standards | Relationship |
| BS ISO 10474:2013 | Identical |
| DIN 50049:1992-04 | Corresponds |
| IEC 60404-8-11:2018 | Magnetic materials - Part 8-11: Specifications for individual materials - Fe-based amorphous strip delivered in the semi-processed state |
| 02/704957 DC : DRAFT NOV 2002 | ISO 683-14 - HEAT-TREATABLE STEELS, ALLOY STEELS AND FREE-CUTTING STEELS - PART 14: HOT-ROLLED STEELS FOR QUENCHED AND TEMPERED SPRINGS |
| ISO 6930-1:2001 | High yield strength steel plates and wide flats for cold forming — Part 1: Delivery conditions for thermomechanically-rolled steels |
| CEI EN 60404-8-6 : 2009 | MAGNETIC MATERIALS - PART 8-6: SPECIFICATIONS FOR INDIVIDUAL MATERIALS - SOFT MAGNETIC METALLIC MATERIALS |
| ISO 404:2013 | Steel and steel products — General technical delivery requirements |
| 14/30248087 DC : 0 | BS ISO 11950 - COLD-REDUCED ELECTROLYTIC CHROMIUM/CHROMIUM OXIDE-COATED STEEL |
| 04/30094090 DC : DRAFT MAR 2004 | IEC 60404-8-3 ED.3 - MAGNETIC MATERIALS - PART 8-3: SPECIFICATIONS OF INDIVIDUAL MATERIALS - COLD-ROLLED ELECTRICAL ALLOYED AND NON-ALLOYED STEEL SHEET AND STRIP DELIVERED IN THE SEMI PROCESSED STATE |
| 15/30287641 DC : 0 | BS EN ISO 16120-1 - NON-ALLOY STEEL WIRE ROD FOR CONVERSION TO WIRE - PART 1: GENERAL REQUIREMENTS |
| BS EN 61400-4:2013 | Wind turbines Design requirements for wind turbine gea |
| ISO 11949:2016 | Cold-reduced tinmill products — Electrolytic tinplate |
| 14/30304346 DC : 0 | BS EN ISO 17782 - PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - QUALIFICATION OF MANUFACTURERS OF SPECIAL MATERIALS |
| API 6DSS : 2017-08 | SPECIFICATION FOR SUBSEA PIPELINE VALVES |
| DIN EN ISO 15589-2 E : 2014 | PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - CATHODIC PROTECTION OF PIPELINE TRANSPORTATION SYSTEMS - PART 2: OFFSHORE PIPELINES (ISO 15589-2:2012) |
| 12/30250149 DC : 0 | BS ISO 16143-2 - STAINLESS STEELS FOR GENERAL PURPOSES - PART 2: SEMI-FINISHED PRODUCTS, BARS, RODS AND SECTIONS |
| 06/30150214 DC : DRAFT MAY 2006 | PETROLEUM AND NATURAL GAS INDUSTRIES - PIPELINE TRANSPORTATION SYSTEMS - PIPELINE VALVES |
| EN ISO 18797-1:2017 | Petroleum, petrochemical and natural gas industries - External corrosion protection of risers by coatings and linings - Part 1: Elastomeric coating systems-polychloroprene or EPDM (ISO 18797-1:2016) |
| 14/30273517 DC : 0 | BS EN ISO 2063-1 - THERMAL SPRAYING - METALLIC AND OTHER INORGANIC COATINGS - ZINC, ALUMINIUM AND THEIR ALLOYS - PART 1: PLANNING OF THE CORROSION PROTECTION SYSTEM AND COMPONENT DESIGN CONSIDERATIONS AND QUALITY REQUIREMENTS |
| 08/30193157 DC : 0 | BS EN ISO 13628-1:2005/AMD 2 - PETROLEUM AND NATURAL GAS INDUSTRIES - DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - PART 1: GENERAL REQUIREMENTS AND RECOMMENDATIONS |
| 16/30294444 DC : 0 | BS ISO 21029-1 - CRYOGENIC VESSELS - TRANSPORTABLE VACUUM INSULATED VESSELS OF NOT MORE THAN 1000 LITRES VOLUME - PART 1: DESIGN, FABRICATION, INSPECTION AND TESTS |
| 01/713202 DC : DRAFT SEP 2001 | ISO/DIS 15589-2 - PETROLEUM AND NATURAL GAS INDUSTRIES - CATHODIC PROTECTION FOR PIPELINE TRANSPORTATION SYSTEMS - PART 2: OFFSHORE PIPELINES |
| ISO 17842-1:2015 | Safety of amusement rides and amusement devices — Part 1: Design and manufacture |
| API 5L REDLINE : 2007 | SPECIFICATION FOR LINE PIPE |
| 08/30176215 DC : DRAFT JAN 2008 | BS ISO 15590-1 - PETROLEUM AND NATURAL GAS INDUSTRIES - INDUCTION BENDS, FITTINGS AND FLANGES FOR PIPELINE TRANSPORTATION SYSTEMS - PART 1: INDUCTION BENDS |
| 15/30269176 DC : 0 | BS ISO 6336-5 - CALCULATION OF LOAD CAPACITY OF SPUR AND HELICAL GEARS - PART 5: STRENGTH AND QUALITY OF MATERIALS |
| 09/30196508 DC : 0 | BS ISO 9328-1 - STEEL FLAT PRODUCTS FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 1: GENERAL REQUIREMENTS |
| 17/30346753 DC : 0 | BS ISO 9328-3 - STEEL FLAT PRODUCTS FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 3: WELDABLE FINE GRAIN STEELS, NORMALIZED |
| 13/30247437 DC : 0 | BS EN ISO 683-17 - HEAT-TREATED STEELS, ALLOY STEELS AND FREE-CUTTING STEELS - PART 17: BALL AND ROLLER BEARING STEELS (ISO/DIS 683-17:2013) |
| 13/30279057 DC : 0 | BS ISO 683-4 - HEAT-TREATABLE STEELS, ALLOY STEELS AND FREE-CUTTING STEELS - PART 4: FREE-CUTTING STEELS |
| ISO 683-3:2016 | Heat-treatable steels, alloy steels and free-cutting steels — Part 3: Case-hardening steels |
| 12/30262118 DC | BS ISO 14313 - PETROLEUM AND NATURAL GAS INDUSTRIES - PIPELINE TRANSPORTATION SYSTEMS - PIPELINE VALVES |
| BS ISO 17746:2016 | Steel wire rope net panels and rolls. Definitions and specifications |
| 12/30267658 DC : 0 | BS EN ISO 21809-2 - PETROLEUM AND NATURAL GAS INDUSTRIES - EXTERNAL COATINGS FOR BURIED OR SUBMERGED PIPELINES USED IN PIPELINE TRANSPORTATION SYSTEMS - PART 2: SINGLE LAYER FUSION BONDED EPOXY COATINGS |
| 11/30191086 DC : 0 | BS ISO 12633-1 - HOT-FINISHED STRUCTURAL HOLLOW SECTIONS OF NON-ALLOY AND FINE GRAIN STEELS - PART 1: TECHNICAL DELIVERY CONDITIONS |
| BS ISO 21009-1:2008 | Cryogenic vessels. Static vacuum-insulated vessels Part 1: Design, fabrication, inspection and tests |
| EN ISO 3452-2:2013 | Non-destructive testing - Penetrant testing - Part 2: Testing of penetrant materials (ISO 3452-2:2013) |
| DIN EN 12496:2014-02 | Galvanic anodes for cathodic protection in seawater and saline mud |
| 15/30278562 DC : 0 | BS ISO 18797-1 - PETROLEUM, PETROCHEMICALS AND NATURAL GAS INDUSTRIES - EXTERNAL CORROSION PROTECTION OF RISERS BY COATINGS AND LININGS - PART 1: ELASTOMERIC COATING SYSTEMS - POLYCHLOROPRENE OR EPDM |
| 15/30316161 DC : 0 | BS ISO 6931-1 - STAINLESS STEELS FOR SPRINGS - PART 1: WIRE |
| 07/30168326 DC : DRAFT DEC 2007 | BS ISO 14723 - PETROLEUM AND NATURAL GAS INDUSTRIES - PIPELINE TRANSPORTATION SYSTEMS - SUBSEA PIPELINE VALVES |
| 13/30256266 DC : 0 | BS ISO 683-18 - HEAT-TREATABLE STEELS, ALLOY STEELS AND FREE-CUTTING STEELS - PART 18: BRIGHT STEEL PRODUCTS |
| 04/30116142 DC : DRAFT JUL 2004 | ISO 4952 - STRUCTURAL STEELS WITH IMPROVED ATMOSPHERIC CORROSION RESISTANCE |
| 02/713148 DC : DRAFT NOV 2002 | BS ISO 16143-2 - STAINLESS STEELS FOR GENERAL PURPOSES - PART 2: SEMI-FINISHED PRODUCTS, BARS, RODS AND SECTIONS |
| 04/30069217 DC : DRAFT FEB 2004 | ISO 16143-3 - STAINLESS STEELS FOR GENERAL PURPOSES - PART 3: WIRE |
| 06/30159843 DC : 0 | BS ISO 13680 - PETROLEUM AND NATURAL GAS INDUSTRIES - CORROSION - RESISTANT ALLOY SEAMLESS TUBES FOR USE AS CASING, TUBING AND COUPLING STOCK - TECHNICAL DELIVERY CONDITIONS |
| 05/30129061 DC : DRAFT FEB 2005 | ISO 7900 - STEEL WIRE AND WIRE PRODUCTS FOR FENCES - ZINC AND ZINC-ALLOY COATED STEEL BARBED WIRE |
| 05/30136183 DC : DRAFT JUL 2005 | IEC 60404-8-7 - MAGNETIC MATERIALS - PART 8-7: SPECIFICATION OF INDIVIDUAL MATERIALS - COLD-ROLLED GRAIN-ORIENTED ELECTRICAL STEEL SHEET AND STRIP DELIVERED IN THE FULLY-PROCESSED STATE |
| 03/312144 DC : DRAFT JULY 2003 | ISO 13628-10 - PETROLEUM AND NATURAL GAS INDUSTRIES - DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - PART 10 - BONDED FLEXIBLE PIPE |
| API 5L CHINESE : 2012 | SPECIFICATION FOR LINE PIPE |
| PREN 10208-3 : DRAFT 1997 | PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL PIPES FOR PIPELINES FOR COMBUSTIBLE FLUIDS - TECHNICAL DELIVERY CONDITIONS - PART 3: PIPES OF REQUIREMENT CLASS C |
| ISO 4951-1:2001 | High yield strength steel bars and sections — Part 1: General delivery requirements |
| I.S. EN ISO 18797-1:2017 | PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - EXTERNAL CORROSION PROTECTION OF RISERS BY COATINGS AND LININGS - PART 1: ELASTOMERIC COATING SYSTEMS-POLYCHLOROPRENE OR EPDM (ISO 18797-1:2016) |
| I.S. EN ISO 14232-1:2017 | THERMAL SPRAYING - POWDERS - PART 1: CHARACTERIZATION AND TECHNICAL SUPPLY CONDITIONS (ISO 14232-1:2017) |
| I.S. EN ISO 21809-5:2017 | PETROLEUM AND NATURAL GAS INDUSTRIES - EXTERNAL COATINGS FOR BURIED OR SUBMERGED PIPELINES USED IN PIPELINE TRANSPORTATION SYSTEMS - PART 5: EXTERNAL CONCRETE COATINGS (ISO 21809-5:2017) |
| ISO 9330-6:1997 | Welded steel tubes for pressure purposes — Technical delivery conditions — Part 6: Longitudinally welded austenitic stainless steel tubes |
| ISO 11951:2016 | Cold-reduced tinmill products — Blackplate |
| I.S. EN ISO 13628-15:2011 | PETROLEUM AND NATURAL GAS INDUSTRIES - DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - PART 15: SUBSEA STRUCTURES AND MANIFOLDS (ISO 13628-15:2011) |
| BS EN ISO 2063-1:2017 | Thermal spraying. Zinc, aluminium and their alloys Design considerations and quality requirements for corrosion protection systems |
| ISO 9329-4:1997 | Seamless steel tubes for pressure purposes — Technical delivery conditions — Part 4: Austenitic stainless steels |
| BS ISO 20421-1:2006 | Cryogenic vessels. Large transportable vacuum-insulated vessels Design, fabrication, inspection and testing |
| ISO 12633-1:2011 | Hot-finished structural hollow sections of non-alloy and fine grain steels — Part 1: Technical delivery conditions |
| ISO 21809-3:2016 | Petroleum and natural gas industries — External coatings for buried or submerged pipelines used in pipeline transportation systems — Part 3: Field joint coatings |
| BS EN ISO 13628-2:2006 | Petroleum and natural gas industries. Design and operation of subsea production systems Unbonded flexible pipe systems for subsea and marine applications |
| BS EN ISO 3452-3:2013 | Non-destructive testing. Penetrant testing Reference test blocks |
| BS EN ISO 3452-2:2013 | Non-destructive testing. Penetrant testing Testing of penetrant materials |
| ISO 14919:2015 | Thermal spraying — Wires, rods and cords for flame and arc spraying — Classification — Technical supply conditions |
| 14/30278953 DC : 0 | BS ISO 17842-1 - SAFETY OF AMUSEMENT RIDES AND AMUSEMENT DEVICES - PART 1: DESIGN AND MANUFACTURE |
| I.S. EN 14870-1:2011 | PETROLEUM AND NATURAL GAS INDUSTRIES - INDUCTION BENDS, FITTINGS AND FLANGES FOR PIPELINE TRANSPORTATION SYSTEMS - PART 1: INDUCTION BENDS |
| EN 12496:2013 | Galvanic anodes for cathodic protection in seawater and saline mud |
| EN ISO 14232-1:2017 | Thermal spraying - Powders - Part 1: Characterization and technical supply conditions (ISO 14232-1:2017) |
| EN ISO 16120-1:2017 | Non-alloy steel wire rod for conversion to wire - Part 1: General requirements (ISO 16120-1:2017) |
| EN 60404-8-6:2017 | Magnetic materials - Part 8-6: Specifications for individual materials - Soft magnetic metallic materials |
| EN 13438:2013 | Paints and varnishes - Powder organic coatings for hot dip galvanised or sherardised steel products for construction purposes |
| ISO 11950:2016 | Cold-reduced tinmill products — Electrolytic chromium/chromium oxide-coated steel |
| 11/30191093 DC : 0 | BS ISO 10799-1 - COLD FORMED WELDED STRUCTURAL HOLLOW SECTIONS OF NON-ALLOY AND FINE GRAIN STEELS - PART 1: TECHNICAL DELIVERY CONDITIONS |
| BIS IS/ISO 3183 : 2007 | PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL PIPE FOR PIPELINE TRANSPORTATION SYSTEMS |
| 11/30230618 DC : 0 | BS ISO 683-2 - HEAT-TREATABLE STEELS, ALLOY STEELS AND FREE-CUTTING STEELS - PART 2: ALLOY STEELS FOR QUENCHING AND TEMPERING |
| BS ISO 7900:2006 | Steel wire and wire products for fences. Zinc- and zinc-alloy-coated steel barbed wire |
| I.S. EN ISO 16228:2018 | FASTENERS - TYPES OF INSPECTION DOCUMENTS (ISO 16228:2017) |
| 15/30284685 DC : 0 | BS ISO 18762 - TUBES OF TITANIUM AND TITANIUM ALLOYS - WELDED TUBES FOR CONDENSERS AND HEAT EXCHANGERS - TECHNICAL DELIVERLY CONDITIONS |
| 14/30286897 DC : 0 | PD 8010-1 - PIPELINE SYSTEMS - PART 1: STEEL PIPELINES ON LAND - CODE OF PRACTICE |
| 15/30334742 DC : 0 | BS EN 60404-8-8 ED 2.0 - MAGNETIC MATERIALS - PART 8-8: SPECIFICATIONS FOR INDIVIDUAL MATERIALS - THIN ELECTRICAL STEEL STRIP AND SHEET FOR USE AT MEDIUM FREQUENCIES |
| 13/30252100 DC : 0 | BS ISO 4990 - STEEL CASTINGS - GENERAL TECHNICAL DELIVERY REQUIREMENTS |
| ISO 17746:2016 | Steel wire rope net panels and rolls — Definitions and specifications |
| BS ISO 18797-1 : 2016 COR 2017 | PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - EXTERNAL CORROSION PROTECTION OF RISERS BY COATINGS AND LININGS - PART 1: ELASTOMERIC COATING SYSTEMSPOLYCHLOROPRENE OR EPDM |
| 09/30169302 DC : 0 | BS EN ISO 16120-1 - NON-ALLOY STEEL WIRE ROD FOR CONVERSION TO WIRE - PART 1: GENERAL REQUIREMENTS |
| BS EN ISO 14232-1:2017 | Thermal spraying. Powders Characterization and technical supply conditions |
| 17/30339115 DC : 0 | ISO/DIS 4978 - STEEL SHEET AND STRIP FOR WELDED GAS CYLINDERS |
| API 5L RUSSIAN : 2012 | SPECIFICATION FOR LINE PIPE |
| 15/30248084 DC : 0 | BS ISO 11949 - COLD-REDUCED TINMILL PRODUCTS - ELECTROLYTIC TINPLATE |
| 08/30154948 DC : DRAFT FEB 2008 | BS ISO 21809-4 - PETROLEUM AND NATURAL GAS INDUSTRIES - EXTERNAL COATINGS FOR BURIED OR SUBMERGED PIPELINES USED IN PIPELINE TRANSPORTATION SYSTEMS - PART 4: POLYETHYLENE COATINGS (2-LAYER PE) |
| 08/30161340 DC : DRAFT FEB 2008 | BS EN 60404-8-10 - MAGNETIC MATERIALS - PART 8: SPECIFICATIONS FOR INDIVIDUAL MATERIALS - SECTION 10: SPECIFICATIONS FOR MAGNETIC MATERIALS (IRON AND STEEL) FOR USE IN RELAYS |
| BS EN ISO 13628-15:2011 | Petroleum and natural gas industries. Design and operation of subsea production systems Subsea structures and manifolds |
| BS ISO 18762:2016 | Tubes of titanium and titanium alloys. Welded tubes for condensers and heat exchangers. Technical delivery conditions |
| BS EN ISO 21809-5:2017 | Petroleum and natural gas industries. External coatings for buried or submerged pipelines used in pipeline transportation systems External concrete coatings |
| 17/30313373 DC : 0 | BS ISO 21809-11 - PETROLEUM AND NATURAL GAS INDUSTRIES - EXTERNAL COATINGS FOR BURIED OR SUBMERGED PIPELINES USED IN PIPELINE TRANSPORTATION SYSTEMS - PART 11: COATING REPAIRS ON REHABILITATION |
| BS ISO 3183-3:1999 | Petroleum and natural gas industries. Steel pipe for pipelines. Technical delivery conditions Pipes of requirement class C |
| API 5CRA : 2010 : INC : ERR 1 : 2011 | SPECIFICATION FOR CORROSION-RESISTANT ALLOY SEAMLESS TUBES FOR USE AS CASING, TUBING AND COUPLING STOCK |
| 13/30252136 DC : 0 | BS ISO 16468 - INVESTMENT CASTINGS (STEEL, NICKEL ALLOYS AND COBALT ALLOYS) - GENERAL TECHNICAL REQUIREMENTS |
| 04/300984 DC : DRAFT JAN 2004 | BS ISO 4955 - HEAT-RESISTING STEELS |
| BS ISO 404:2013 | Steel and steel products. General technical delivery requirements |
| NF EN ISO 18797-1 : 2017 | PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - EXTERNAL CORROSION PROTECTION OF RISERS BY COATINGS AND LININGS - PART 1: ELASTOMERIC COATING SYSTEMS-POLYCHLOROPRENE OR EPDM |
| 09/30155621 DC : 0 | BS ISO 15698-2 - STEEL FOR THE REINFORCEMENT OF CONCRETE - HEADED BARS - PART 2: TEST METHODS |
| 07/30170577 DC : DRAFT AUG 2007 | BS ISO 13623 - PETROLEUM AND NATURAL GAS INDUSTRIES - PIPELINE TRANSPORTATION SYSTEMS |
| 12/30250146 DC : 0 | BS ISO 16143-1 - STAINLESS STEELS FOR GENERAL PURPOSES - PART 1: FLAT PRODUCTS |
| 05/30091555 DC : DRAFT MAY 2005 | ISO 3183 - PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL PIPE FOR PIPELINE TRANSPORTATION SYSTEMS |
| BS ISO 13628-10 : 2005 AMD 16775 | PETROLEUM AND NATURAL GAS INDUSTRIES - DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - PART 10: SPECIFICATION FOR BONDED FLEXIBLE PIPE |
| API 17L1 : 2013 | SPECIFICATION FOR FLEXIBLE PIPE ANCILLARY EQUIPMENT |
| IEC 60404-8-4:2013 | Magnetic materials - Part 8-4: Specifications for individual materials - Cold-rolled non-oriented electrical steel strip and sheet delivered in the fully-processed state |
| I.S. EN ISO 12679:2015 | THERMAL SPRAYING - RECOMMENDATIONS FOR THERMAL SPRAYING (ISO 12679:2011) |
| ISO/TS 35105:2018 | Petroleum and natural gas industries — Arctic operations — Material requirements for arctic operations |
| ISO 9328-7:2018 | Steel flat products for pressure purposes — Technical delivery conditions — Part 7: Stainless steels |
| IEC 60404-8-2:1998 | Magnetic materials - Part 8-2: Specifications for individual materials - Cold-rolled electrical alloyed steel sheet and strip delivered in the semi-processed state |
| ISO 6931-2:2005 | Stainless steels for springs — Part 2: Narrow strip |
| ISO 683-1:2016 | Heat-treatable steels, alloy steels and free-cutting steels — Part 1: Non-alloy steels for quenching and tempering· |
| ISO 9330-2:1997 | Welded steel tubes for pressure purposes — Technical delivery conditions — Part 2: Electric resistance and induction welded unalloyed and alloyed steel tubes with specified elevated temperature properties |
| PREN ISO 683-17 : DRAFT 2013 | HEAT-TREATED STEELS, ALLOY STEELS AND FREE-CUTTING STEELS - PART 17: BALL AND ROLLER BEARING STEELS (ISO/DIS 683-17:2013) |
| BS EN ISO 3183 : 2012 | PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL PIPE FOR PIPELINE TRANSPORTATION SYSTEMS |
| ISO 15590-1:2009 | Petroleum and natural gas industries — Induction bends, fittings and flanges for pipeline transportation systems — Part 1: Induction bends |
| BS ISO 20421-1:2019 | Cryogenic vessels. Large transportable vacuum-insulated vessels Design, fabrication, inspection and testing |
| ISO 21809-1:2011 | Petroleum and natural gas industries — External coatings for buried or submerged pipelines used in pipeline transportation systems — Part 1: Polyolefin coatings (3-layer PE and 3-layer PP) |
| IEC 60404-8-10:2009 | Magnetic materials - Part 8-10: Specifications for individual materials - Magnetic materials (iron and steel) for use in relays |
| ISO 13270:2013 | Steel fibres for concrete — Definitions and specifications |
| ISO 9330-3:1997 | Welded steel tubes for pressure purposes — Technical delivery conditions — Part 3: Electric resistance and induction welded unalloyed and alloyed steel tubes with specified low temperature properties |
| ISO 4954:1993 | Steels for cold heading and cold extruding |
| ISO 16020:2005 | Steel for the reinforcement and prestressing of concrete — Vocabulary |
| DIN EN 13438:2013-12 | PAINTS AND VARNISHES - POWDER ORGANIC COATINGS FOR HOT DIP GALVANISED OR SHERARDISED STEEL PRODUCTS FOR CONSTRUCTION PURPOSES |
| DIN EN ISO 3452-3:2014-03 | NON-DESTRUCTIVE TESTING - PENETRANT TESTING - PART 3: REFERENCE TEST BLOCKS (ISO 3452-3:2013) |
| BS EN ISO 14919:2015 | Thermal spraying. Wires, rods and cords for flame and arc spraying. Classification. Technical supply conditions |
| I.S. EN ISO 14920:2015 | THERMAL SPRAYING - SPRAYING AND FUSING OF SELF-FLUXING ALLOYS (ISO 14920:2015) |
| I.S. EN ISO 13628-2:2006 | PETROLEUM AND NATURAL GAS INDUSTRIES - DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - PART 2: UNBONDED FLEXIBLE PIPE SYSTEMS FOR SUBSEA AND MARINE APPLICATIONS |
| I.S. EN ISO 3452-2:2013 | NON-DESTRUCTIVE TESTING - PENETRANT TESTING - PART 2: TESTING OF PENETRANT MATERIALS (ISO 3452-2:2013) |
| I.S. EN 14161:2011 | PETROLEUM AND NATURAL GAS INDUSTRIES - PIPELINE TRANSPORTATION SYSTEMS (ISO 13623:2009 MODIFIED) |
| I.S. EN 13942:2009 | PETROLEUM AND NATURAL GAS INDUSTRIES - PIPELINE TRANSPORTATION SYSTEMS - PIPELINE VALVES |
| I.S. EN ISO 3452-3:2013 | NON-DESTRUCTIVE TESTING - PENETRANT TESTING - PART 3: REFERENCE TEST BLOCKS (ISO 3452-3:2013) |
| I.S. EN ISO 14723:2009 | PETROLEUM AND NATURAL GAS INDUSTRIES - PIPELINE TRANSPORTATION SYSTEMS - SUBSEA PIPELINE VALVES |
| I.S. EN 13438:2013 | PAINTS AND VARNISHES - POWDER ORGANIC COATINGS FOR HOT DIP GALVANISED OR SHERARDISED STEEL PRODUCTS FOR CONSTRUCTION PURPOSES |
| I.S. EN ISO 21809-2:2014 | PETROLEUM AND NATURAL GAS INDUSTRIES - EXTERNAL COATINGS FOR BURIED OR SUBMERGED PIPELINES USED IN PIPELINE TRANSPORTATION SYSTEMS - PART 2: SINGLE LAYER FUSION-BONDED EPOXY COATINGS (ISO 21809-2:2014) |
| I.S. EN ISO 683-17:2014 | HEAT-TREATED STEELS, ALLOY STEELS AND FREE-CUTTING STEELS - PART 17: BALL AND ROLLER BEARING STEELS (ISO 683-17:2014) |
| I.S. EN ISO 14919:2015 | THERMAL SPRAYING - WIRES, RODS AND CORDS FOR FLAME AND ARC SPRAYING - CLASSIFICATION - TECHNICAL SUPPLY CONDITIONS (ISO 14919:2015) |
| I.S. EN ISO 1461:2009 | HOT DIP GALVANIZED COATINGS ON FABRICATED IRON AND STEEL ARTICLES - SPECIFICATIONS AND TEST METHODS |
| NF EN ISO 1461 : 2009 | HOT DIP GALVANIZED COATINGS ON FABRICATED IRON AND STEEL ARTICLES - SPECIFICATIONS AND TEST METHODS |
| 16/30338749 DC : 0 | BS EN ISO 21809-5 - PETROLEUM AND NATURAL GAS INDUSTRIES - EXTERNAL COATINGS FOR BURIED OR SUBMERGED PIPELINES USED IN PIPELINE TRANSPORTATION SYSTEMS - PART 5: EXTERNAL CONCRETE COATINGS |
| 05/30092093 DC : DRAFT JUL 2005 | ISO 24314 - STRUCTURAL STEELS - STEELS FOR SEISMIC IMPROVED RESISTANCE FOR BUILDING |
| API 5CRA : 2010 : INC : ERR 1 : 2011 : R2015 | SPECIFICATION FOR CORROSION-RESISTANT ALLOY SEAMLESS TUBES FOR USE AS CASING, TUBING AND COUPLING STOCK |
| 15/30296029 DC : 0 | BS ISO 4955 - HEAT-RESISTANT STEELS |
| 07/30083514 DC : 0 | BS EN ISO 21809-3 - PETROLEUM AND NATURAL GAS INDUSTRIES - EXTERNAL COATINGS FOR BURIED AND SUBMERGED PIPELINES USED IN PIPELINE TRANSPORTATION SYSTEMS - PART 3: FIELD JOINT COATINGS |
| I.S. EN 61400-4:2013 | WIND TURBINES - PART 4: DESIGN REQUIREMENTS FOR WIND TURBINE GEARBOXES (IEC 61400-4:2012 (EQV)) |
| 11/30235499 DC : 0 | BS EN ISO 3183 - PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL PIPE FOR PIPELINE TRANSPORTATION SYSTEMS |
| 16/30278559 DC : 0 | BS ISO 18796-1 - PETROLEUM, PETROCHEMICALS AND NATURAL GAS INDUSTRIES - INTERNAL COATING AND LINING OF CARBON STEEL PROCESS VESSELS - PART 1: TECHNICAL REQUIREMENTS |
| BS ISO 16143-3:2014 | Stainless steels for general purposes Wire |
| BS EN ISO 16904:2016 | Petroleum and natural gas industries. Design and testing of LNG marine transfer arms for conventional onshore terminals |
| 09/30196607 DC : 0 | BS ISO 9328-2 - STEEL FLAT PRODUCTS FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 2: NON-ALLOY AND ALLOY STEELS WITH SPECIFIED ELEVATED TEMPERATURE PROPERTIES |
| IEC 60404-8-8:2017 | Magnetic materials - Part 8-8: Specifications for individual materials - Thin electrical steel strip and sheet for use at medium frequencies |
| BS ISO 15589-2 : 2012 | PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - CATHODIC PROTECTION OF PIPELINE TRANSPORTATION SYSTEMS - PART 2: OFFSHORE PIPELINES |
| 10/30232896 DC : 0 | BS ISO 15589-2 - PETROLEUM AND NATURAL GAS INDUSTRIES - CATHODIC PROTECTION OF PIPELINE TRANSPORTATION SYSTEMS - PART 2: OFFSHORE PIPELINES |
| I.S. EN ISO 15589-2:2014 | PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - CATHODIC PROTECTION OF PIPELINE TRANSPORTATION SYSTEMS - PART 2: OFFSHORE PIPELINES (ISO 15589-2:2012) |
| 12/30250152 DC : 0 | BS ISO 16143-3 - STAINLESS STEELS FOR GENERAL PURPOSES - PART 3: WIRE |
| 14/30286899 DC : 0 | PD 8010-2 - PIPELINE SYSTEMS - PART 2: SUBSEA PIPELINES - CODE OF PRACTICE |
| 14/30295082 DC : 0 | BS ISO 683-3 - HEAT-TREATABLE STEELS, ALLOY STEELS AND FREE-CUTTING STEELS - PART 3: CASE HARDENING STEELS |
| 15/30280562 DC : 0 | BS EN ISO 16228 - FASTENERS - INSPECTION DOCUMENTS |
| 09/30172965 DC : 0 | BS EN ISO 13628-15 - PETROLEUM AND NATURAL GAS INDUSTRIES - DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - PART 15: SUBSEA STRUCTURES AND MANIFOLDS |
| 03/111274 DC : DRAFT AUG 2003 | ISO 9328-5 - STEEL PLATES AND STRIPS FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 5: WELDABLE FINE GRAIN STEELS, THERMOMECHANICALLY ROLLED |
| 09/30196511 DC : 0 | BS ISO 9328-7 - STEEL FLAT PRODUCTS FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 7: STAINLESS STEELS |
| 13/30285580 DC : 0 | BS EN ISO 16961 - PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - INTERNAL PROTECTIVE COATING AND LINING OF ABOVE GROUND STEEL STORAGE TANKS |
| DIN EN ISO 17668:2016-06 | ZINC DIFFUSION COATINGS ON FERROUS PRODUCTS - SHERARDIZING - SPECIFICATION (ISO 17668:2016) |
| BS ISO 4990:2015 | Steel castings. General technical delivery requirements |
| 18/30350515 DC : 0 | BS ISO 20421-1 - CRYOGENIC VESSELS - LARGE TRANSPORTABLE VACUUM-INSULATED VESSELS - PART 1: DESIGN, FABRICATION, INSPECTION AND TESTING |
| BS ISO 13270:2013 | Steel fibres for concrete. Definitions and specifications |
| PD 8010-2:2004 | Code of practice for pipelines Subsea pipelines |
| 00/707848 DC : DRAFT APR 2000 | EN ISO 14723 - PETROLEUM AND NATURAL GAS INDUSTRIES - PIPELINE TRANSPORTATION SYSTEMS - SUBSEA PIPELINE VALVES |
| BS ISO 16143-2:2014 | Stainless steels for general purposes Corrosion-resistant semi-finished products, bars, rods and sections |
| 04/301931 DC : DRAFT JAN 2004 | ISO 13628-2 - PETROLEUM AND NATURAL GAS INDUSTRIES DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - PART 2: UNBONDED FLEXIBLE PIPE SYSTEMS FOR SUBSEA AND MARINE APPLICATIONS |
| 04/30110587 DC : DRAFT MARCH 2004 | ISO 23717 - STEEL WIRE AND WIRE PRODUCTS - HOSE REINFORCEMENT WIRE |
| 02/712761 DC : DRAFT OCT 2002 | ISO 15509-2 - PETROLEUM AND NATURAL GAS INDUSTRIES - INDUCTION BENDS, FITTINGS AND FLANGES FOR PIPELINE TRANSPORTATION SYSTEMS - PART 2: FITTINGS |
| DIN EN ISO 14232-1 E : 2017 | THERMAL SPRAYING - POWDERS - PART 1: CHARACTERIZATION AND TECHNICAL SUPPLY CONDITIONS (ISO 14232-1:2017) |
| 16/30338711 DC : 0 | BS IEC 60404-8-6 ED 3.0 - MAGNETIC MATERIALS - PART 8-6: SPECIFICATIONS FOR INDIVIDUAL MATERIALS - SOFT MAGNETIC METALLIC MATERIALS |
| 11/30230615 DC : 0 | BS ISO 683-1 - HEAT-TREATABLE STEELS, ALLOY STEELS AND FREE-CUTTING STEELS - PART 1: NON-ALLOY STEELS FOR QUENCHING AND TEMPERING |
| BS ISO 14661:2000 | Thermal turbines for industrial applications (steam turbines, gas expansion turbines). General requirements |
| 12/30261766 DC : 0 | BS EN 60404-8-4 - MAGNETIC MATERIALS - PART 8-4: SPECIFICATIONS FOR INDIVIDUAL MATERIALS - COLD-ROLLED NON-ORIENTED ELECTRICAL STEEL STRIP AND SHEET DELIVERED IN THE FULLY-PROCESSED STATE |
| BS EN ISO 16120-1:2017 | Non-alloy steel wire rod for conversion to wire General requirements |
| 04/102437 DC : DRAFT JAN 2004 | ISO 21029-1 - CRYOGENIC VESSELS - TRANSPORTABLE VACUUM INSULATED VESSELS OF NOT MORE THAN 1000 L - PART 1: DESIGN, FABRICATION, INSPECTION AND TESTS |
| I.S. EN ISO 3183:2012 | PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL PIPE FOR PIPELINE TRANSPORTATION SYSTEMS (ISO 3183:2012) |
| PD 8010-1:2004 | Code of practice for pipelines Steel pipelines on land |
| ISO 18762:2016 | Tubes of titanium and titanium alloys — Welded tubes for condensers and heat exchangers — Technical delivery conditions |
| 06/30083492 DC : DRAFT MAY 2006 | ISO 21809-2 - PETROLEUM AND NATURAL GAS INDUSTRIES - EXTERNAL COATINGS FOR BURIED AND SUBMERGED PIPELINES USED IN PIPELINE TRANSPORTATION SYSTEMS - PART 2: FUSION BONDED EPOXY COATINGS |
| ISO 16468:2015 | Investment castings (steel, nickel alloys and cobalt alloys) — General technical requirements |
| API 6DSS CHINESE : 2009 | SPECIFICATION FOR SUBSEA PIPELINE VALVES |
| API 17G : 2006 : R2011 | RECOMMENDED PRACTICE FOR COMPLETION/WORKOVER RISERS |
| BS EN ISO 12679:2015 | Thermal spraying. Recommendations for thermal spraying |
| API SPEC 17K : 2017 | SPECIFICATION FOR BONDED FLEXIBLE PIPE |
| ISO 9328-2:2018 | Steel flat products for pressure purposes — Technical delivery conditions — Part 2: Non-alloy and alloy steels with specified elevated temperature properties |
| ISO 10855-1:2018 | Offshore containers and associated lifting sets — Part 1: Design, manufacture and marking of offshore containers |
| I.S. EN ISO 17668:2016 | ZINC DIFFUSION COATINGS ON FERROUS PRODUCTS - SHERARDIZING - SPECIFICATION (ISO 17668:2016) |
| ISO 15590-2:2003 | Petroleum and natural gas industries — Induction bends, fittings and flanges for pipeline transportation systems — Part 2: Fittings |
| ISO 683-18:2014 | Heat-treatable steels, alloy steels and free-cutting steels — Part 18: Bright steel products |
| NF EN ISO 4957 : 2000 | TOOL STEELS |
| ISO 4951-2:2001 | High yield strength steel bars and sections — Part 2: Delivery conditions for normalized, normalized rolled and as-rolled steels |
| ISO 3183:2012 | Petroleum and natural gas industries — Steel pipe for pipeline transportation systems |
| ISO 4952:2006 | Structural steels with improved atmospheric corrosion resistance |
| ISO 18797-1:2016 | Petroleum, petrochemical and natural gas industries — External corrosion protection of risers by coatings and linings — Part 1: Elastomeric coating systems-polychloroprene or EPDM |
| ISO 21029-1:2018 | Cryogenic vessels — Transportable vacuum insulated vessels of not more than 1 000 litres volume — Part 1: Design, fabrication, inspection and tests |
| EN ISO 2063-1:2017 | Thermal spraying - Zinc, aluminium and their alloys - Part 1: Design considerations and quality requirements for corrosion protection systems (ISO 2063-1:2017) |
| NACE SP 01 15 : 2015 | PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - CATHODIC PROTECTION OF PIPELINE TRANSPORTATION SYSTEMS - PART 2: OFFSHORE PIPELINES |
| ISO 17745:2016 | Steel wire ring net panels — Definitions and specifications |
| ISO 9329-3:1997 | Seamless steel tubes for pressure purposes — Technical delivery conditions — Part 3: Unalloyed and alloyed steels with specified low temperature properties |
| EN ISO 16228:2018 | Fasteners - Types of inspection documents (ISO 16228:2017) |
| ISO 3183-1:1996 | Petroleum and natural gas industries — Steel pipe for pipelines — Technical delivery conditions — Part 1: Pipes of requirement class A |
| DIN EN ISO 14232-1:2016-02 (Draft) | THERMAL SPRAYING - POWDERS - PART 1: CHARACTERIZATION AND TECHNICAL SUPPLY CONDITIONS (ISO 14232-1:2017) |
| ISO 20421-1:2006 | Cryogenic vessels — Large transportable vacuum-insulated vessels — Part 1: Design, fabrication, inspection and testing |
| ISO 7900:2006 | Steel wire and wire products for fences — Zinc- and zinc-alloy-coated steel barbed wire |
| ISO 3183-3:1999 | Petroleum and natural gas industries — Steel pipe for pipelines — Technical delivery conditions — Part 3: Pipes of requirement class C |
| ISO 6931-1:2016 | Stainless steels for springs — Part 1: Wire |
| ISO 14313:2007 | Petroleum and natural gas industries — Pipeline transportation systems — Pipeline valves |
| ISO 6336-5:2016 | Calculation of load capacity of spur and helical gears — Part 5: Strength and quality of materials |
| EN 13942:2009 | Petroleum and natural gas industries - Pipeline transportation systems - Pipeline valves (ISO 14313:2007 modified) |
| DIN EN ISO 683-17:2015-02 | Heat-treated steels, alloy steels and free-cutting steels - Part 17: Ball and roller bearing steels (ISO 683-17:2014) |
| DIN EN ISO 14919:2015-04 | Thermal spraying - Wires, rods and cords for flame and arc spraying - Classification - Technical supply conditions (ISO 14919:2015) |
| DIN EN ISO 3452-2:2014-03 | Non-destructive testing - Penetrant testing - Part 2: Testing of penetrant materials (ISO 3452-2:2013) |
| ISO 17668:2016 | Zinc diffusion coatings on ferrous products — Sherardizing — Specification |
| BS EN ISO 21809-2:2014 | Petroleum and natural gas industries. External coatings for buried or submerged pipelines used in pipeline transportation systems Single layer fusion-bonded epoxy coatings |
| ISO 16904:2016 | Petroleum and natural gas industries — Design and testing of LNG marine transfer arms for conventional onshore terminals |
| EN ISO 1461:2009 | Hot dip galvanized coatings on fabricated iron and steel articles - Specifications and test methods (ISO 1461:2009) |
| EN ISO 13680:2010 | Petroleum and natural gas industries - Corrosion-resistant alloy seamless tubes for use as casing, tubing and coupling stock - Technical delivery conditions (ISO 13680:2010) |
| EN ISO 21809-2:2014 | Petroleum and natural gas industries - External coatings for buried or submerged pipelines used in pipeline transportation systems - Part 2: Single layer fusion-bonded epoxy coatings (ISO 21809-2:2014) |
| EN ISO 3452-3:2013 | Non-destructive testing - Penetrant testing - Part 3: Reference test blocks (ISO 3452-3:2013) |
| EN ISO 13628-10:2006 | Petroleum and natural gas industries - Design and operation of subsea production systems - Part 10: Specification for bonded flexible pipe (ISO 13628-10:2006) |
| EN 14870-1:2011 | Petroleum and natural gas industries - Induction bends, fittings and flanges for pipeline transportation systems - Part 1: Induction bends (ISO 15590-1:2009 modified) |
| API 2SC : 2010 | MANUFACTURE OF STRUCTURAL STEEL CASTINGS FOR PRIMARY OFFSHORE APPLICATIONS |
| BS EN ISO 15589-2:2014 | Petroleum, petrochemical and natural gas industries. Cathodic protection of pipeline transportation systems Offshore pipelines |
| 16/30347251 DC : 0 | BS EN 60404-8-11 ED 1.0 - MAGNETIC MATERIALS - PART 8-11: SPECIFICATIONS FOR INDIVIDUAL MATERIALS - FE-BASED AMORPHOUS STRIP DELIVERED IN THE SEMI-PROCESSED STATE |
| ISO 6930-2:2004 | High yield strength steel plates and wide flats for cold forming — Part 2: Delivery condition for normalized, normalized rolled and as-rolled steels |
| 03/111273 DC : DRAFT AUG 2003 | ISO 9328-4 - STEEL PLATES AND STRIPS FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 4: NICKEL-ALLOY STEELS WITH SPECIFIED LOW TEMPERATURE PROPERTIES |
| ISO 9330-5:2000 | Welded steel tubes for pressure purposes — Technical delivery conditions — Part 5: Submerged arc-welded unalloyed and alloyed steel tubes with specified low temperature properties |
| 07/30174185 DC : 0 | BS EN ISO 1461 - HOT DIP GALVANIZED COATINGS ON FABRICATED IRON AND STEEL ARTICLES - SPECIFICATIONS AND TEST METHODS |
| 17/30346756 DC : 0 | BS ISO 9328-4 - STEEL FLAT PRODUCTS FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 4: NICKEL-ALLOY STEELS WITH SPECIFIED LOW TEMPERATURE PROPERTIES |
| PREN 13438 : DRAFT 2012 | PAINTS AND VARNISHES - POWDER ORGANIC COATINGS FOR GALVANIZED OR SHERARDIZED STEEL PRODUCTS FOR CONSTRUCTION PURPOSES |
| API SPEC 5CRA : 2010 | SPECIFICATION FOR CORROSION-RESISTANT ALLOY SEAMLESS TUBES FOR USE AS CASING, TUBING AND COUPLING STOCK |
| ISO 16228:2017 | Fasteners — Types of inspection documents |
| 10/30191247 DC : DRAFT APR 2010 | BS EN ISO 13628-16 - PETROLEUM AND NATURAL GAS INDUSTRIES - DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - PART 16: SPECIFICATION FOR FLEXIBLE PIPE ANCILLARY EQUIPMENT |
| BS EN ISO 17668:2016 | Zinc diffusion coatings on ferrous products. Sherardizing. Specification |
| I.S. EN ISO 21809-1:2011 | PETROLEUM AND NATURAL GAS INDUSTRIES - EXTERNAL COATINGS FOR BURIED OR SUBMERGED PIPELINES USED IN PIPELINE TRANSPORTATION SYSTEMS - PART 1: POLYOLEFIN COATINGS (3-LAYER PE AND 3-LAYER PP) |
| BS ISO 13628-7 : 2005 AMD 16887 | PETROLEUM AND NATURAL GAS INDUSTRIES - DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - PART 7: COMPLETION/WORKOVER RISER SYSTEMS |
| BS EN ISO 16961:2015 | Petroleum, petrochemical and natural gas industries. Internal coating and lining of steel storage tanks |
| BS EN 12496:2013 | Galvanic anodes for cathodic protection in seawater and saline mud |
| BS EN ISO 21809-3:2016 | Petroleum and natural gas industries. External coatings for buried or submerged pipelines used in pipeline transportation systems Field joint coatings |
| BS ISO 683-5:2017 | Heat treatable steels, alloy steels and free-cutting steels Nitriding steels |
| 15/30280509 DC : 0 | BS EN ISO 1891-4 - FASTENERS - TERMINOLOGY - PART 4: CONTROLS, INSPECTION, DELIVERY, ACCEPTANCE AND QUALITY |
| 04/30115844 DC : DRAFT JUNE 2004 | ISO/DIS 20421-1 - CRYOGENIC VESSELS - LARGE TRANSPORTABLE VACUUM INSULATED VESSELS - PART 1: DESIGN, FABRICATION, INSPECTION AND TESTING |
| 03/111272 DC : DRAFT AUG 2003 | ISO 9328-3 - STEEL PLATES AND STRIPS FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 3: WELDABLE FINE GRAIN STEELS, NORMALIZED |
| ISO 9328-4:2018 | Steel flat products for pressure purposes — Technical delivery conditions — Part 4: Nickel-alloy steels with specified low temperature properties |
| BS ISO 23717:2006 | Steel wire and wire products. Hose reinforcement wire |
| 13/30248090 DC : 0 | BS ISO 11951 - COLD-REDUCED BLACKPLATE IN COIL FORM FOR THE PRODUCTION OF TINPLATE OR ELECTROLYTIC CHROMIUM/CHROMIUM OXIDE-COATED STEEL |
| DIN EN ISO 16120-1:2017-09 | NON-ALLOY STEEL WIRE ROD FOR CONVERSION TO WIRE - PART 1: GENERAL REQUIREMENTS (ISO 16120-1:2017) |
| 15/30331863 DC : 0 | BS EN ISO 10855-2 - OFFSHORE CONTAINERS AND ASSOCIATED LIFTING SETS - PART 2: LIFTING SETS - DESIGN, MANUFACTURE AND MARKING |
| 13/30278077 DC : 0 | BS EN ISO 16904 - PETROLEUM AND NATURAL GAS INDUSTRIES - DESIGN AND TESTING OF LNG MARINE TRANSFER ARMS FOR CONVENTIONAL ONSHORE TERMINALS |
| 04/301144 DC : DRAFT JAN 2004 | ISO 6931-2 - STAINLESS STEELS FOR SPRINGS - PART 2: NARROW STRIP |
| BS ISO 16020:2005 | Steel for the reinforcement and prestressing of concrete. Vocabulary |
| 11/30230612 DC : 0 | BS ISO 683-11 - HEAT-TREATABLE STEELS, ALLOY STEELS AND FREE-CUTTING STEELS - PART 11: CASE-HARDENING STEELS |
| ISO 14661:2000 | Thermal turbines for industrial applications (steam turbines, gas expansion turbines) — General requirements |
| BS ISO 16468:2015 | Investment castings (steel, nickel alloys and cobalt alloys). General technical requirements |
| 15/30331856 DC : 0 | BS EN ISO 10855-1 - OFFSHORE CONTAINERS AND ASSOCIATED LIFTING SETS - PART 1: OFFSHORE CONTAINER - DESIGN, MANUFACTURE AND MARKING |
| 03/111271 DC : DRAFT AUG 2003 | ISO 9328-2 - STEEL PLATES AND STRIPS FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 2: NON-ALLOY AND ALLOY STEELS WITH SPECIFIED ELEVATED TEMPERATURE PROPERTIES |
| BS ISO 16143-1:2014 | Stainless steels for general purposes Corrosion-resistant flat products |
| 06/30153331 DC : DRAFT JULY 2006 | BS ISO 21009-1 - CRYOGENIC VESSELS - STATIC VACUUM-INSULATED VESSELS - PART 1: DESIGN, FABRICATION, INSPECTION AND TESTS |
| I.S. EN 60404-8-6:2017 | MAGNETIC MATERIALS - PART 8-6: SPECIFICATIONS FOR INDIVIDUAL MATERIALS - SOFT MAGNETIC METALLIC MATERIALS |
| 03/111275 DC : DRAFT AUG 2003 | ISO 9328-6 - STEEL PLATES AND STRIPS FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 6: WELDABLE FINE GRAIN STEELS, QUENCHED AND TEMPERED |
| BS EN 60404-8-6:2017 | Magnetic materials Specifications for individual materials. Soft magnetic metallic materials |
| ISO 10799-1:2011 | Cold-formed welded structural hollow sections of non-alloy and fine grain steels — Part 1: Technical delivery conditions |
| API 2RD : 2013 | DYNAMIC RISERS FOR FLOATING PRODUCTION SYSTEMS |
| NORSOK M 001:2014 | MATERIALS SELECTION |
| 08/30160023 DC : DRAFT AUG 2008 | BS EN ISO 21809-5 - PETROLEUM AND NATURAL GAS INDUSTRIES - EXTERNAL COATINGS FOR BURIED OR SUBMERGED PIPELINES USED IN PIPELINE TRANSPORTATION SYSTEMS - PART 5: EXTERNAL CONCRETE COATINGS |
| API 17P : 2013 | DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - SUBSEA STRUCTURES AND MANIFOLDS |
| DIN EN ISO 3183:2013-03 | PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL PIPE FOR PIPELINE TRANSPORTATION SYSTEMS (ISO 3183:2012) |
| 16/30328759 DC : 0 | BS EN 13814-1 - SAFETY OF AMUSEMENT RIDES AND AMUSEMENT DEVICES - PART 1: DESIGN AND MANUFACTURE |
| 07/30173429 DC : 0 | BS EN ISO 13628-1 AMD2 - PETROLEUM AND NATURAL GAS INDUSTRIES - DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - PART 1: GENERAL REQUIREMENTS AND RECOMMENDATIONS |
| API TR 17TR7 : 2017 | VERIFICATION AND VALIDATION OF SUBSEA CONNECTORS |
| API 17J REDLINE : 2008 | SPECIFICATION FOR UNBONDED FLEXIBLE PIPE |
| BS EN ISO 21809-1:2011 | Petroleum and natural gas industries. External coatings for buried or submerged pipelines used in pipeline transportation systems Polyolefin coatings (3-layer PE and 3-layer PP) |
| ISO 10799:2001 | Structural steels — Cold-formed, welded, structural hollow sections — Technical delivery requirements |
| API 6DX : 2012 | ACTUATOR SIZING AND MOUNTING KITS FOR PIPELINE VALVES |
| BS EN ISO 16228:2018 | Fasteners. Types of inspection documents |
| ISO/TR 11637:1997 | Boron treated engineering steels for quenching and tempering |
| ISO 13847:2013 | Petroleum and natural gas industries — Pipeline transportation systems — Welding of pipelines |
| I.S. EN 12496:2013 | GALVANIC ANODES FOR CATHODIC PROTECTION IN SEAWATER AND SALINE MUD |
| ISO 9328-5:2018 | Steel flat products for pressure purposes — Technical delivery conditions — Part 5: Weldable fine grain steels, thermomechanically rolled |
| ISO 4951-3:2001 | High yield strength steel bars and sections — Part 3: Delivery conditions for thermomechanically-rolled steels |
| I.S. EN ISO 2063-1:2017 | THERMAL SPRAYING - ZINC, ALUMINIUM AND THEIR ALLOYS - PART 1: DESIGN CONSIDERATIONS AND QUALITY REQUIREMENTS FOR CORROSION PROTECTION SYSTEMS (ISO 2063-1:2017) |
| ISO 15590-3:2004 | Petroleum and natural gas industries — Induction bends, fittings and flanges for pipeline transportation systems — Part 3: Flanges |
| BIS IS 8910 : 2010 | GENERAL TECHNICAL DELIVERY REQUIREMENTS FOR STEEL AND STEEL PRODUCTS |
| API 6D :2015 | SPECIFICATION FOR PIPELINE AND PIPING VALVES |
| ISO 16143-1:2014 | Stainless steels for general purposes — Part 1: Corrosion-resistant flat products |
| ISO 12490:2011 | Petroleum and natural gas industries — Mechanical integrity and sizing of actuators and mounting kits for pipeline valves |
| ISO 630-5:2014 | Structural steels — Part 5: Technical delivery conditions for structural steels with improved atmospheric corrosion resistance |
| ISO 16143-2:2014 | Stainless steels for general purposes — Part 2: Corrosion-resistant semi-finished products, bars, rods and sections |
| ISO 21809-4:2009 | Petroleum and natural gas industries — External coatings for buried or submerged pipelines used in pipeline transportation systems — Part 4: Polyethylene coatings (2-layer PE) |
| ISO 4955:2016 | Heat-resistant steels |
| ISO 683-15:1992 | Heat-treatable steels, alloy steels and free-cutting steels — Part 15: Valve steels for internal combustion engines |
| IEC 60404-8-7:2017 | Magnetic materials - Part 8-7: Specifications for individual materials - Cold-rolled grain-oriented electrical steel strip and sheet delivered in the fully processed state |
| IEC 60404-8-3:2005 | Magnetic materials - Part 8-3: Specifications for individual materials - Cold-rolled electrical non-alloyed and alloyed steel sheet and strip delivered in the semi-processed state |
| ISO 683-11:2012 | Heat-treatable steels, alloy steels and free-cutting steels — Part 11: Case-hardening steels |
| ISO 4957:1999 | Tool steels |
| DIN EN ISO 1461:2009-10 | Hot dip galvanized coatings on fabricated iron and steel articles - Specifications and test methods (ISO 1461:2009) |
| DIN EN ISO 14920:2015-04 | Thermal spraying - Spraying and fusing of self-fluxing alloys (ISO 14920:2015) |
| BS EN ISO 13680:2010 | Petroleum and natural gas industries. Corrosion-resistant alloy seamless tubes for use as casing, tubing and coupling stock Technical delivery conditions |
| ISO 13680:2010 | Petroleum and natural gas industries — Corrosion-resistant alloy seamless tubes for use as casing, tubing and coupling stock — Technical delivery conditions |
| ISO 12679:2011 | Thermal spraying — Recommendations for thermal spraying |
| BS EN 14163:2001 | Petroleum and natural gas industries. Pipeline transportation systems. Welding of pipelines |
| BS EN ISO 13628-10:2006 | Petroleum and natural gas industries. Design and operation of subseaprod uction systems Specification for bonded flexible pipe |
| BS EN 14870-3:2006 | Petroleum and natural gas industries. Induction bends, fittings and flanges for pipeline transportation systems Flanges |
| BS EN ISO 13628-7:2006 | Petroleum and natural gas industries. Design and operation of subsea production systems Completion/workover riser systems |
| ISO 21809-2:2014 | Petroleum and natural gas industries — External coatings for buried or submerged pipelines used in pipeline transportation systems — Part 2: Single layer fusion-bonded epoxy coatings |
| ISO 13628-7:2005 | Petroleum and natural gas industries — Design and operation of subsea production systems — Part 7: Completion/workover riser systems |
| ISO 16961:2015 | Petroleum, petrochemical and natural gas industries — Internal coating and lining of steel storage tanks |
| BS EN ISO 12683:2004 | Mechanically deposited coatings of zinc. Specification and test methods |
| EN ISO 21809-3:2016 | Petroleum and natural gas industries - External coatings for buried or submerged pipelines used in pipeline transportation systems - Part 3: Field joint coatings (ISO 21809-3:2016) |
| BS EN ISO 14723:2009 | Petroleum and natural gas industries. Pipeline transportation systems. Subsea pipeline valves |
| ISO 1461:2009 | Hot dip galvanized coatings on fabricated iron and steel articles — Specifications and test methods |
| ISO 14232-1:2017 | Thermal spraying — Powders — Part 1: Characterization and technical supply conditions |
| IEC 60404-8-6:2016 | Magnetic materials - Part 8-6: Specifications for individual materials - Soft magnetic metallic materials |
| ISO 16120-1:2017 | Non-alloy steel wire rod for conversion to wire — Part 1: General requirements |
| ISO 14920:2015 | Thermal spraying — Spraying and fusing of self-fluxing alloys |
| ISO 12683:2004 | Mechanically deposited coatings of zinc — Specification and test methods |
| BS EN ISO 14920:2015 | Thermal spraying. Spraying and fusing of self-fluxing alloys |
| BS EN ISO 683-17:2014 | Heat-treated steels, alloy steels and free-cutting steels Ball and roller bearing steels |
| ISO 683-17:2014 | Heat-treated steels, alloy steels and free-cutting steels — Part 17: Ball and roller bearing steels |
| BS EN 13438:2013 | Paints and varnishes. Powder organic coatings for hot dip galvanised or sherardised steel products for construction purposes |
| BS EN ISO 1461:2009 | Hot dip galvanized coatings on fabricated iron and steel articles. Specifications and test methods |
| ISO 13628-15:2011 | Petroleum and natural gas industries — Design and operation of subsea production systems — Part 15: Subsea structures and manifolds |
| ISO 3452-3:2013 | Non-destructive testing — Penetrant testing — Part 3: Reference test blocks |
| BS EN 14161 : 2011 | PETROLEUM AND NATURAL GAS INDUSTRIES - PIPELINE TRANSPORTATION SYSTEMS (ISO 13623:2009 MODIFIED) |
| BS EN 13942:2009 | Petroleum and natural gas industries. Pipeline transportation systems. Pipeline valves |
| BS EN 14870-1:2011 | Petroleum and natural gas industries. Induction bends, fittings and flanges for pipeline transportation systems Induction bends |
| ISO 13628-2:2006 | Petroleum and natural gas industries — Design and operation of subsea production systems — Part 2: Unbonded flexible pipe systems for subsea and marine applications |
| EN ISO 683-17:2014 | Heat-treated steels, alloy steels and free-cutting steels - Part 17: Ball and roller bearing steels (ISO 683-17:2014) |
| EN ISO 12679:2015 | Thermal spraying - Recommendations for thermal spraying (ISO 12679:2011) |
| EN ISO 15589-2:2014 | Petroleum, petrochemical and natural gas industries - Cathodic protection of pipeline transportation systems - Part 2: Offshore pipelines (ISO 15589-2:2012) |
| EN ISO 17668:2016 | Zinc diffusion coatings on ferrous products - Sherardizing - Specification (ISO 17668:2016) |
| EN ISO 21809-1:2011 | Petroleum and natural gas industries - External coatings for buried or submerged pipelines used in pipeline transportation systems - Part 1: Polyolefin coatings (3-layer PE and 3-layer PP) (ISO 21809-1:2011) |
| EN ISO 16904:2016 | Petroleum and natural gas industries - Design and testing of LNG marine transfer arms for conventional onshore terminals (ISO 16904:2016) |
| EN ISO 14723:2009 | Petroleum and natural gas industries - Pipeline transportation systems - Subsea pipeline valves (ISO 14723:2009) |
| EN ISO 14920:2015 | Thermal spraying - Spraying and fusing of self-fluxing alloys (ISO 14920:2015) |
| EN ISO 13628-7:2006 | Petroleum and natural gas industries - Design and operation of subsea production systems - Part 7: Completion/workover riser systems (ISO 13628-7:2005) |
| EN ISO 13628-15:2011 | Petroleum and natural gas industries - Design and operation of subsea production systems - Part 15: Subsea structures and manifolds (ISO 13628-15:2011) |
| EN 14870-3:2006 | Petroleum and natural gas industries - Induction bends, fittings and flanges for pipeline transportation systems - Part 3: Flanges (ISO 15590-3:2004, modified) |
| EN ISO 12683:2004 | Mechanically deposited coatings of zinc - Specification and test methods (ISO 12683:2004) |
| EN 14161:2011+A1:2015 | Petroleum and natural gas industries - Pipeline transportation systems (ISO 13623:2009 modified) |
| EN ISO 16961:2015 | Petroleum, petrochemical and natural gas industries - Internal coating and lining of steel storage tanks (ISO 16961:2015) |
| EN 14870-2:2004 | Petroleum and natural gas industries - Induction bends, fittings and flanges for pipeline transportation systems - Part 2: Fittings (ISO 15590-2:2003 modified) |
| EN ISO 14919:2015 | Thermal spraying - Wires, rods and cords for flame and arc spraying - Classification - Technical supply conditions (ISO 14919:2015) |
| I.S. EN ISO 16120-1:2017 | NON-ALLOY STEEL WIRE ROD FOR CONVERSION TO WIRE - PART 1: GENERAL REQUIREMENTS (ISO 16120-1:2017) |
| 12/30244863 DC : 0 | BS ISO 404 - STEEL AND STEEL PRODUCTS - GENERAL TECHNICAL DELIVERY REQUIREMENTS |
| 17/30353583 DC : 0 | BS ISO 19427 - STEEL WIRE ROPES - PRE-FABRICATED PARALLEL WIRE STRANDS FOR SUSPENSION BRIDGE MAIN CABLE - SPECIFICATIONS |
| 14/30284697 DC : 0 | BS ISO 683-5 - HEAT TREATABLE STEELS, ALLOY STEELS AND FREE-CUTTING STEELS - PART 5: NITRIDING STEELS |
| BS ISO 21809-4:2009 | Petroleum and natural gas industries. External coatings for buried or submerged pipelines used in pipeline transportation systems Polyethylene coatings (2-layer PE) |
| 12/30238456 DC : 0 | BS EN 13438 - PAINTS AND VARNISHES - POWDER ORGANIC COATINGS FOR GALVANIZED OR SHERARDIZED STEEL PRODUCTS FOR CONSTRUCTION PURPOSES |
| 14/30256684 DC : 0 | BS EN ISO 17668 - ZINC DIFFUSION COATINGS ON FERROUS PRODUCTS - SHERARDIZING - SPECIFICATION |
| 17/30346747 DC : 0 | BS ISO 9328-1 - STEEL FLAT PRODUCTS FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 1: GENERAL REQUIREMENTS |
| BS 6404-8.10:1995 | Magnetic materials. Individual materials Specification for magnetic materials (iron and steel) for use in relays |
| 14/30300605 DC : 0 | BS EN ISO 21809-3 - PETROLEUM AND NATURAL GAS INDUSTRIES - EXTERNAL COATINGS FOR BURIED OR SUBMERGED PIPELINES USED IN PIPELINE TRANSPORTATION SYSTEMS - PART 3: FIELD JOINT COATINGS |
| I.S. EN ISO 21809-3:2016 | PETROLEUM AND NATURAL GAS INDUSTRIES - EXTERNAL COATINGS FOR BURIED OR SUBMERGED PIPELINES USED IN PIPELINE TRANSPORTATION SYSTEMS - PART 3: FIELD JOINT COATINGS (ISO 21809-3:2016) |
| 11/30203534 DC : DRAFT AUG 2011 | BS ISO 13270 - STEEL FIBRES FOR CONCRETE - DEFINITIONS AND SPECIFICATIONS |
| ISO 19203:2018 | Hot-dip galvanized and zinc-aluminium coated high tensile steel wire for bridge cables — Specifications |
| 17/30358601 DC : 0 | BS ISO 15590-1 - PETROLEUM AND NATURAL GAS INDUSTRIES - INDUCTION BENDS, FITTINGS AND FLANGES FOR PIPELINE TRANSPORTATION SYSTEMS - PART 1: INDUCTION BENDS |
| ISO 14657:2005 | Zinc-coated steel for the reinforcement of concrete |
| 17/30337413 DC : 0 | BS EN ISO 4957 - TOOL STEELS |
| ISO 683-4:2016 | Heat-treatable steels, alloy steels and free-cutting steels — Part 4: Free-cutting steels |
| BS ISO 12490:2011 | Petroleum and natural gas industries. Mechanical integrity and sizing of actuators and mounting kits for pipeline valves |
| 08/30180264 DC : DRAFT JUNE 2008 | BS EN 13942 - PETROLEUM AND NATURAL GAS INDUSTRIES - PIPELINE TRANSPORTATION SYSTEMS - PIPELINE VALVES |
| 11/30210938 DC : 0 | BS EN 61400-4 - WIND TURBINES - PART 4: DESIGN REQUIREMENTS FOR WIND TURBINE GEARBOXES |
| 10/30187796 DC : DRAFT DEC 2010 | BS EN 14161 - PETROLEUM AND NATURAL GAS INDUSTRIES - PIPELINE TRANSPORTATION SYSTEMS |
| BS ISO 17745:2016 | Steel wire ring net panels. Definitions and specifications |
| ISO 683-14:2004 | Heat-treatable steels, alloy steels and free-cutting steels — Part 14: Hot-rolled steels for quenched and tempered springs |
| API SPEC 17J : 2014 | SPECIFICATION FOR UNBONDED FLEXIBLE PIPE |
| DIN EN ISO 15589-2:2014-07 | Petroleum, petrochemical and natural gas industries - Cathodic protection of pipeline transportation systems - Part 2: Offshore pipelines (ISO 15589-2:2012) |
| DIN EN 14161:2015-07 | ABSCHLUESSE AUSSEN UND AUSSENJALOUSIEN - LEISTUNGS- UND SICHERHEITSANFORDERUNGEN |
| API 5CRA CHINESE : 2011 | SPECIFICATION FOR CORROSION RESISTANT ALLOY SEAMLESS TUBES FOR USE AS CASING, TUBING AND COUPLING STOCK |
| ISO 4990:2015 | Steel castings — General technical delivery requirements |
| ISO 9330-4:2000 | Welded steel tubes for pressure purposes — Technical delivery conditions — Part 4: Submerged arc-welded unalloyed and alloyed steel tubes with specified elevated temperature properties |
| BS ISO 12679 : 2011 | THERMAL SPRAYING - RECOMMENDATIONS FOR THERMAL SPRAYING |
| DIN EN ISO 12679:2015-12 | THERMAL SPRAYING - RECOMMENDATIONS FOR THERMAL SPRAYING (ISO 12679:2011) |
| ISO 10855-2:2018 | Offshore containers and associated lifting sets — Part 2: Design, manufacture and marking of lifting sets |
| 14/30259002 DC : 0 | BS ISO 17745 - STEEL WIRE RING MESH PANELS - DEFINITIONS AND SPECIFICATIONS |
| BS ISO 6336-5:2016 | Calculation of load capacity of spur and helical gears Strength and quality of materials |
| 16/30292322 DC : 0 | BS ISO 19203 - HOT-DIP GALVANIZED AND ZINC-ALUMINIUM COATED HIGH TENSILE STEEL WIRE FOR BRIDGE CABLES - SPECIFICATIONS |
| 97/703009 DC : 0 | PREN 10208-3 - PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL PIPES FOR PIPELINES FOR COMBUSTIBLE FLUIDS - TECHNICAL DELIVERY CONDITIONS - PART 3: PIPES OF REQUIREMENT CLASS C |
| 17/30346750 DC : 0 | BS ISO 9328-2 - STEEL FLAT PRODUCTS FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 2: NON-ALLOY AND ALLOY STEELS WITH SPECIFIED ELEVATED TEMPERATURE PROPERTIES |
| 03/314809 DC : DRAFT SEP 2003 | EN ISO 13680 - PETROLEUM AND NATURAL GAS INDUSTRIES - CORROSION-RESISTANT ALLOY SEAMLESS TUBES FOR USE AS CASING, TUBING AND COUPLING STOCK - TECHNICAL DELIVERY CONDITIONS |
| API 17G : 2006 : R2016 | RECOMMENDED PRACTICE FOR COMPLETION/WORKOVER RISERS |
| API 17G:2006 | RECOMMENDED PRACTICE FOR COMPLETION/WORKOVER RISERS |
| API 6DSS REDLINE : 2009 | SPECIFICATION FOR SUBSEA PIPELINE VALVES |
| ISO 9328-6:2018 | Steel flat products for pressure purposes — Technical delivery conditions — Part 6: Weldable fine grain steels, quenched and tempered |
| I.S. EN ISO 16904:2016 | PETROLEUM AND NATURAL GAS INDUSTRIES - DESIGN AND TESTING OF LNG MARINE TRANSFER ARMS FOR CONVENTIONAL ONSHORE TERMINALS (ISO 16904:2016) |
| ISO/TS 18226:2006 | Plastics pipes and fittings — Reinforced thermoplastics pipe systems for the supply of gaseous fuels for pressures up to 4 MPa (40 bar) |
| BS EN ISO 18797-1:2017 | Petroleum, petrochemical and natural gas industries. External corrosion protection of risers by coatings and linings Elastomeric coating systems-polychloroprene or EPDM |
| ISO 21009-1:2008 | Cryogenic vessels — Static vacuum-insulated vessels — Part 1: Design, fabrication, inspection and tests |
| I.S. EN ISO 4957:2000 | TOOL STEELS |
| ISO 23717:2006 | Steel wire and wire products — Hose reinforcement wire |
| ISO 683-5:2017 | Heat treatable steels, alloy steels and free-cutting steels — Part 5: Nitriding steels |
| I.S. EN ISO 16961:2015 | PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - INTERNAL COATING AND LINING OF STEEL STORAGE TANKS (ISO 16961:2015) |
| ISO 2063-1:2017 | Thermal spraying — Zinc, aluminium and their alloys — Part 1: Design considerations and quality requirements for corrosion protection systems |
| ISO 8458-1:2002 | Steel wire for mechanical springs — Part 1: General requirements |
| ISO 9328-1:2018 | Steel flat products for pressure purposes — Technical delivery conditions — Part 1: General requirements |
| NF EN ISO 3183 : 2013 | PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL PIPE FOR PIPELINE TRANSPORTATION SYSTEMS |
| ISO 16143-3:2014 | Stainless steels for general purposes — Part 3: Wire |
| ISO 21809-5:2017 | Petroleum and natural gas industries — External coatings for buried or submerged pipelines used in pipeline transportation systems — Part 5: External concrete coatings |
| ISO 630-1:2011 | Structural steels — Part 1: General technical delivery conditions for hot-rolled products |
| ISO 9328-3:2018 | Steel flat products for pressure purposes — Technical delivery conditions — Part 3: Weldable fine grain steels, normalized |
| ISO 15698-2:2012 | Steel for the reinforcement of concrete — Headed bars — Part 2: Test methods |
| ISO 3183-2:1996 | Petroleum and natural gas industries — Steel pipe for pipelines — Technical delivery conditions — Part 2: Pipes of requirements class B |
| EN ISO 4957:1999 | Tool steels (ISO 4957:1999) |
| EN ISO 21809-5:2017 | Petroleum and natural gas industries - External coatings for buried or submerged pipelines used in pipeline transportation systems - Part 5: External concrete coatings (ISO 21809-5:2017) |
| ISO 14723:2009 | Petroleum and natural gas industries — Pipeline transportation systems — Subsea pipeline valves |
| ISO 13628-10:2005 | Petroleum and natural gas industries — Design and operation of subsea production systems — Part 10: Specification for bonded flexible pipe |
| BS EN 14870-2:2004 | Petroleum and natural gas industries. Induction bends, fittings and flanges for pipeline transportation systems Fittings |
| ISO 15589-2:2012 | Petroleum, petrochemical and natural gas industries — Cathodic protection of pipeline transportation systems — Part 2: Offshore pipelines |
| ISO 3452-2:2013 | Non-destructive testing — Penetrant testing — Part 2: Testing of penetrant materials |
| 01/715268 DC : DRAFT NOV 2001 | BS ISO 13628-7 - PETROLEUM AND NATURAL GAS INDUSTRIES - DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - PART 7: COMPLETION/WORKOVER RISER SYSTEMS |
| BS EN ISO 4957:2000 | Tool steels |
| BS ISO 17842-1:2015 | Safety of amusement rides and amusement devices Design and manufacture |
| DIN EN ISO 12683:2005-02 | Mechanically deposited coatings of zinc - Specification and test methods (ISO 12683:2004); German version EN ISO 12683:2004 |
| EN 61400-4:2013 | Wind turbines - Part 4: Design requirements for wind turbine gearboxes |
| I.S. EN 14870-2:2005 | PETROLEUM AND NATURAL GAS INDUSTRIES - INDUCTION BENDS, FITTINGS AND FLANGES FOR PIPELINE TRANSPORTATION SYSTEMS - PART 2: FITTINGS |
| NF EN 13942 : 2009 | PETROLEUM AND NATURAL GAS INDUSTRIES - PIPELINE TRANSPORTATION SYSTEMS - PIPELINE VALVES |
| I.S. EN 14163:2002 | PETROLEUM AND NATURAL GAS INDUSTRIES - PIPELINE TRANSPORTATION SYSTEMS - WELDING OF PIPELINES |
| I.S. EN 14870-3:2006 | PETROLEUM AND NATURAL GAS INDUSTRIES - INDUCTION BENDS, FITTINGS AND FLANGES FOR PIPELINE TRANSPORTATION SYSTEMS - PART 3: FLANGES |
| API SPEC 20C:2020(R2025) | Closed Die Forgings for Use in the Petroleum and Natural Gas Industry |
| API STD 2RD:2013(R2020) | Dynamic Risers for Floating Production Systems, Second Edition |
| UNE-EN ISO 21809-1:2019 | Petroleum and natural gas industries - External coatings for buried or submerged pipelines used in pipeline transportation systems - Part 1: Polyolefin coatings (3-layer PE and 3-layer PP) (ISO 21809-1:2018) |
| UNE-EN ISO 14232-1:2017 | Thermal spraying - Powders - Part 1: Characterization and technical supply conditions (ISO 14232-1:2017) |
| UNE-EN 12496:2013 | Galvanic anodes for cathodic protection in seawater and saline mud |
| UNE-EN ISO 3452-2:2014 | Non-destructive testing - Penetrant testing - Part 2: Testing of penetrant materials (ISO 3452-2:2013) |
| UNE-EN ISO 21809-3:2016 | Petroleum and natural gas industries - External coatings for buried or submerged pipelines used in pipeline transportation systems - Part 3: Field joint coatings (ISO 21809-3:2016) |
| UNE-EN ISO 14920:2015 | Thermal spraying - Spraying and fusing of self-fluxing alloys (ISO 14920:2015) |
| UNE-EN ISO 683-17:2015 | Heat-treated steels, alloy steels and free-cutting steels - Part 17: Ball and roller bearing steels (ISO 683-17:2014) |
| UNE-EN ISO 16120-1:2017 | Non-alloy steel wire rod for conversion to wire - Part 1: General requirements (ISO 16120-1:2017) |
| UNE-EN 61400-4:2013 | Wind turbines - Part 4: Design requirements for wind turbine gearboxes |
| UNE-EN ISO 21809-5:2018 | Petroleum and natural gas industries - External coatings for buried or submerged pipelines used in pipeline transportation systems - Part 5: External concrete coatings (ISO 21809-5:2017) |
| UNE-EN ISO 3452-3:2014 | Non-destructive testing - Penetrant testing - Part 3: Reference test blocks (ISO 3452-3:2013) |
| UNE-EN ISO 16904:2016 | Petroleum and natural gas industries - Design and testing of LNG marine transfer arms for conventional onshore terminals (ISO 16904:2016) |
| CEI EN 61400-4 : 2013 | WIND TURBINES - PART 4: DESIGN REQUIREMENTS FOR WIND TURBINE GEARBOXES |
| UNE-EN ISO 21809-1:2011 | Petroleum and natural gas industries - External coatings for buried or submerged pipelines used in pipeline transportation systems - Part 1: Polyolefin coatings (3-layer PE and 3-layer PP) (ISO 21809-1:2011) |
| UNE-EN ISO 14919:2015 | Thermal spraying - Wires, rods and cords for flame and arc spraying - Classification - Technical supply conditions (ISO 14919:2015) |
| UNE-EN ISO 21809-2:2015 | Petroleum and natural gas industries - External coatings for buried or submerged pipelines used in pipeline transportation systems - Part 2: Single layer fusion-bonded epoxy coatings (ISO 21809-2:2014) |
| UNE-EN ISO 12679:2016 | Thermal spraying - Recommendations for thermal spraying (ISO 12679:2011) |
| NACE SP 06 07 : 2007 | PETROLEUM AND NATURAL GAS INDUSTRIES - CATHODIC PROTECTION OF PIPELINE |
| UNE-EN ISO 15589-2:2014 | Petroleum, petrochemical and natural gas industries - Cathodic protection of pipeline transportation systems - Part 2: Offshore pipelines (ISO 15589-2:2012) |
| API SPEC 20C:2020 | Closed Die Forgings for Use in the Petroleum and Natural Gas Industry |
| ISO 404:2013 | Steel and steel products — General technical delivery requirements |
| AS ISO 3452.3:2020 | Non-destructive testing - Penetrant testing Reference test blocks |
| ISO 4990:2015 | Steel castings — General technical delivery requirements |
Summarise
$93.90
Including GST where applicable
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.