Customer Support: 131 242

  • Shopping Cart
    There are no items in your cart
We noticed you’re not on the correct regional site. Switch to our AMERICAS site for the best experience.
Dismiss alert

ISO 12215-3:2002

Current

Current

The latest, up-to-date edition.

Small craft — Hull construction and scantlings — Part 3: Materials: Steel, aluminium alloys, wood, other materials

Available format(s)

Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users

Language(s)

English, French

Published date

30-05-2002

$118.72
Including GST where applicable

This part of ISO 12215 specifies requirements for materials intended for use in the construction of the hull, superstructure and appendages, in particular:

  • weldable normal and higher strength hot-rolled steel plates, wide flats, sections and bars;
  • austenitic stainless steels, fabricated in the form of plates or profiles;
  • wrought aluminium alloys fabricated as plates, sections and extruded profiles;
  • wood in the form of solid timber, plywood or veneer;
  • other suitable materials.

This part of ISO 12215 applies to small craft with a hull length (LH) according to ISO 8666 of up to 24 m.

DevelopmentNote
Supersedes ISO/FDIS 12215-3 (06/2002) Also numbered as BIS IS 16183-3. (02/2015)
DocumentType
Standard
Pages
10
PublisherName
International Organization for Standardization
Status
Current

UNE-EN ISO 6185-4:2012 Inflatable boats - Part 4: Boats with a hull length of between 8 m and 24 m with a motor power rating of 15 kW and greater (ISO 6185-4:2011, Corrected version 2014-08-01)
UNI EN ISO 12215-5 : 2014 SMALL CRAFT - HULL CONSTRUCTION AND SCANTLINGS - PART 5: DESIGN PRESSURES FOR MONOHULLS, DESIGN STRESSES, SCANTLINGS DETERMINATION
13/30229200 DC : 0 BS EN ISO 6185-3 - INFLATABLE BOATS - PART 3: BOATS WITH A MAXIMUM MOTOR POWER RATING OF 15 KW AND GREATER
EN ISO 12215-6:2008 Small craft - Hull construction and scantlings - Part 6: Structural arrangements and details (ISO 12215-6:2008)
UNE-EN ISO 6185-3:2015 Inflatable boats - Part 3: Boats with a hull length less than 8 m with a motor rating of 15 kW and greater (ISO 6185-3:2014)
UNE-EN ISO 12215-9:2013 Small craft - Hull construction and scantlings - Part 9: Sailing craft appendages (ISO 12215-9:2012)
DIN EN ISO 6185-4:2011-10 INFLATABLE BOATS - PART 4: BOATS WITH A HULL LENGTH OF BETWEEN 8 M AND 24 M WITH A MOTOR POWER RATING OF 15 KW AND GREATER
DIN EN ISO 6185-3:2014-12 INFLATABLE BOATS - PART 3: BOATS WITH A HULL LENGTH LESS THAN 8 M WITH A MOTOR POWER RATING OF 15 KW AND GREATER (ISO 6185-3:2014)
UNI EN ISO 6185-4 : 2011 INFLATABLE BOATS - PART 4: BOATS WITH A HULL LENGTH OF BETWEEN 8 M AND 24 M WITH A MOTOR POWER RATING OF 15 KW AND GREATER
BS EN ISO 12215-4:2002 Small craft. Hull construction and scantlings Workshop and manufacturing
I.S. EN ISO 6185-4:2011 INFLATABLE BOATS - PART 4: BOATS WITH A HULL LENGTH OF BETWEEN 8 M AND 24 M WITH A MOTOR POWER RATING OF 15 KW AND GREATER (ISO 6185-4:2011, CORRECTED VERSION 2014-08-01)
PREN ISO 6185-3 : DRAFT 2013 INFLATABLE BOATS - PART 3: BOATS WITH A MAXIMUM MOTOR POWER RATING OF 15 KW AND GREATER (ISO/DIS 6185-3:2013)
I.S. EN ISO 12215-9:2012 SMALL CRAFT - HULL CONSTRUCTION AND SCANTLINGS - PART 9: SAILING CRAFT APPENDAGES (ISO 12215-9:2012)
ISO 6185-3:2014 Inflatable boats — Part 3: Boats with a hull length less than 8 m with a motor rating of 15 kW and greater
DIN EN ISO 12215-6:2008-07 SMALL CRAFT - HULL CONSTRUCTION AND SCANTLINGS - PART 6: STRUCTURAL ARRANGEMENTS AND DETAILS
UNI EN ISO 12215-9 : 2012 SMALL CRAFT - HULL CONSTRUCTION AND SCANTLINGS - PART 9: SAILING CRAFT APPENDAGES
I.S. EN ISO 12215-4:2002 SMALL CRAFT - HULL CONSTRUCTION AND SCANTLINGS - PART 4: WORKSHOP AND MANUFACTURING
DIN EN ISO 12215-4:2002-09 SMALL CRAFT - HULL CONSTRUCTION AND SCANTLINGS - WORKSHOPS AND MANUFACTURING
DIN EN ISO 12215-5:2014-10 SMALL CRAFT - HULL CONSTRUCTION AND SCANTLINGS - PART 5: DESIGN PRESSURES FOR MONOHULLS, DESIGN STRESSES, SCANTLINGS DETERMINATION (ISO 12215-5:2008 + AMD 1:2014)
NF EN ISO 6185-4 : 2011 INFLATABLE BOATS - PART 4: BOATS WITH AN HULL LENGTH OF BETWEEN 8 M AND 24 M WITH A MOTOR POWER RATING OF 15 KW AND GREATER
UNI EN ISO 12215-6 : 2008 SMALL CRAFT - HULL CONSTRUCTION AND SCANTLINGS - PART 6: STRUCTURAL ARRANGEMENTS AND DETAILS
ISO 12215-9:2012 Small craft Hull construction and scantlings Part 9: Sailing craft appendages
BS EN ISO 6185-4:2011 Inflatable boats Boats with a hull length of between 8 m and 24 m with a motor power rating of 15 kW and greater
ONORM EN ISO 12215-9 : 2013 SMALL CRAFT - HULL CONSTRUCTION AND SCANTLINGS - PART 9: SAILING CRAFT APPENDAGES (ISO 12215-9:2012)
BS EN ISO 12215-5 : 2008 SMALL CRAFT - HULL CONSTRUCTION AND SCANTLINGS - PART 5: DESIGN PRESSURES FOR MONOHULLS, DESIGN STRESSES, SCANTLINGS DETERMINATION
EN ISO 12215-4:2002 Small craft - Hull construction and scantlings - Part 4: Workshop and manufacturing (ISO 12215-4:2002)
UNE-EN ISO 12215-5:2008 Small craft - Hull construction and scantlings - Part 5: Design pressures for monohulls, design stresses, scantlings determination (ISO 12215-5:2008)
00/717312 DC : 0 PREN ISO 12215-5 - SMALL CRAFT - HULL CONSTRUCTION AND SCANTLINGS - PART 5: DESIGN PRESSURES, DESIGN STRESSES, SCANTLING DETERMINATION
00/715272 DC : 0 ISO/DIS 12215-6 - SMALL CRAFT - HULL CONSTRUCTION AND SCANTLINGS - PART 6: STRUCTURAL ARRANGEMENTS AND DETAILS
ISO 12215-6:2008 Small craft — Hull construction and scantlings — Part 6: Structural arrangements and details
ISO 12215-4:2002 Small craft — Hull construction and scantlings — Part 4: Workshop and manufacturing
BS EN ISO 6185-3:2014 Inflatable boats Boats with a hull length less than 8 m with a motor rating of 15 kW and greater
ONORM EN ISO 12215-5 : 2014 SMALL CRAFT - HULL CONSTRUCTION AND SCANTLINGS - PART 5: DESIGN PRESSURES FOR MONOHULLS, DESIGN STRESSES, SCANTLINGS DETERMINATION (ISO 12215-5:2008 + AMD 1:2014)
EN ISO 12215-9:2012 Small craft - Hull construction and scantlings - Part 9: Sailing craft appendages (ISO 12215-9:2012)
I.S. EN ISO 12215-5:2008 SMALL CRAFT - HULL CONSTRUCTION AND SCANTLINGS - PART 5: DESIGN PRESSURES FOR MONOHULLS, DESIGN STRESSES, SCANTLINGS DETERMINATION (ISO 12215-5:2008)
UNI EN ISO 6185-3 : 2014 INFLATABLE BOATS - PART 3: BOATS WITH A HULL LENGTH LESS THAN 8 M WITH A MOTOR RATING OF 15 KW AND GREATER
DIN EN ISO 12215-9:2013-01 SMALL CRAFT - HULL CONSTRUCTION AND SCANTLINGS - PART 9: SAILING CRAFT APPENDAGES (ISO 12215-9:2012)
ISO 12215-5:2008 Small craft Hull construction and scantlings Part 5: Design pressures for monohulls, design stresses, scantlings determination
I.S. EN ISO 6185-3:2014 INFLATABLE BOATS - PART 3: BOATS WITH A HULL LENGTH LESS THAN 8 M WITH A MOTOR RATING OF 15 KW AND GREATER (ISO 6185-3:2014)
BS EN ISO 12215-9:2012 Small craft. Hull construction and scantlings Sailing craft appendages
EN ISO 6185-3:2014 Inflatable boats - Part 3: Boats with a hull length less than 8 m with a motor rating of 15 kW and greater (ISO 6185-3:2014)
EN ISO 6185-4:2011 Inflatable boats - Part 4: Boats with a hull length of between 8 m and 24 m with a motor power rating of 15 kW and greater (ISO 6185-4:2011, Corrected version 2014-08-01)
ISO 6185-4:2011 Inflatable boats Part 4: Boats with a hull length of between 8 m and 24 m with a motor power rating of 15 kW and greater
I.S. EN ISO 12215-6:2008 SMALL CRAFT - HULL CONSTRUCTION AND SCANTLINGS - PART 6: STRUCTURAL ARRANGEMENTS AND DETAILS

ISO 209-1:1989 Wrought aluminium and aluminium alloys Chemical composition and forms of products Part 1: Chemical composition
ISO 3348:1975 Wood — Determination of impact bending strength
ISO 2300:1973 Sawn timber of broadleaved species Defects Terms and definitions
ISO 6362-2:2014 Wrought aluminium and aluminium alloys — Extruded rods/bars, tubes and profiles — Part 2: Mechanical properties
ISO 8905:1988 Sawn timber — Test methods — Determination of ultimate strength in shearing parallel to grain
ISO 2299:1973 Sawn timber of broadleaved species — Defects — Classification
1994/25/EC : 1994 DIRECTIVE 94/25/EC OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL OF 16 JUNE 1994 ON THE APPROXIMATION OF THE LAWS, REGULATIONS AND ADMINISTRATIVE PROVISIONS OF THE MEMBER STATES RELATING TO RECREATIONAL CRAFT
ISO 8666:2016 Small craft Principal data
ISO 3130:1975 Wood — Determination of moisture content for physical and mechanical tests
ISO 1031:1974 Coniferous sawn timber — Defects — Terms and definitions
ISO 4476:1983 Coniferous and broadleaved sawlogs — Sizes — Vocabulary
ISO 3346:1975 Wood — Determination of ultimate tensile stress perpendicular to grain
ISO 4948-1:1982 Steels Classification Part 1: Classification of steels into unalloyed and alloy steels based on chemical composition
ISO 3132:1975 Wood — Testing in compression perpendicular to grain
ISO 2301:1973 Sawn timber of broadleaved species — Defects — Measurement
ISO 8906:1988 Sawn timber — Test methods — Determination of resistance to local transverse compression
ISO 8375:2017 Timber structures — Glued laminated timber — Test methods for determination of physical and mechanical properties
ISO 3133:1975 Wood — Determination of ultimate strength in static bending
ISO 6361-2:2014 Wrought aluminium and aluminium alloys — Sheets, strips and plates — Part 2: Mechanical properties
ISO 1098:1975 Veneer plywood for general use General requirements
ISO 12215-4:2002 Small craft — Hull construction and scantlings — Part 4: Workshop and manufacturing
ISO 3347:1976 Wood — Determination of ultimate shearing stress parallel to grain
ISO 3349:1975 Wood — Determination of modulus of elasticity in static bending
ISO 4948-2:1981 Steels Classification Part 2: Classification of unalloyed and alloy steels according to main quality classes and main property or application characteristics
EN ISO 12215-4:2002 Small craft - Hull construction and scantlings - Part 4: Workshop and manufacturing (ISO 12215-4:2002)
ISO 3131:1975 Wood — Determination of density for physical and mechanical tests
ISO 1032:1974 Coniferous sawn timber Sizes Terms and definitions
ISO 1029:1974 Coniferous sawn timber — Defects — Classification
ISO 4474:1989 Coniferous and broadleaved tree sawlogs — Visible defects — Terms and definitions
ISO 2074:2007 Plywood Vocabulary
ISO 1096:2014 Plywood Classification
ISO 3129:2012 Wood Sampling methods and general requirements for physical and mechanical testing of small clear wood specimens
ISO 3345:1975 Wood — Determination of ultimate tensile stress parallel to grain
ISO 9086-1:1987 Wood Methods of physical and mechanical testing Vocabulary Part 1: General concepts and macrostructure
ISO 3787:1976 Wood — Test methods — Determination of ultimate stress in compression parallel to grain

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.