Customer Support: 131 242

  • There are no items in your cart
We noticed you’re not on the correct regional site. Switch to our AMERICAS site for the best experience.
Dismiss alert

ISO 2602:1980

Current
Current

The latest, up-to-date edition.

Statistical interpretation of test results Estimation of the mean Confidence interval
Available format(s)

Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users

Language(s)

English, French

Published date

01-02-1980

Concerns the estimation of the mean of a normal population on the basis of a series of tests applied to a random sample of individuals drawn from this population when the variance of the population is unknown and calculation of the conficence interval for the population mean therefrom and from the standard deviation. Test method may be subject to systematic errors.

DevelopmentNote
Also numbered as BS 2846-2(1981) (06/2005)
DocumentType
Standard
Pages
5
PublisherName
International Organization for Standardization
Status
Current

Standards Relationship
NFX 06 042 : 1971 Similar to
NBN X 03 001 : 1985 Identical
PN ISO 2602 : 1994 Identical
UNE 66040:2003 Identical

ISO 10054:1998 Internal combustion compression-ignition engines Measurement apparatus for smoke from engines operating under steady-state conditions Filter-type smokemeter
ISO 178:2010 Plastics Determination of flexural properties
10/30216358 DC : 0 BS ISO 29042-8 - SAFETY OF MACHINERY - EVALUATION OF THE EMISSION OF AIRBORNE HAZARDOUS SUBSTANCES - PART 8: ROOM METHOD FOR MEASUREMENT OF THE POLLUTANT CONCENTRATION PARAMETER
17/30353428 DC : DRAFT JUNE 2017 BS EN 17129 - CONTINUOUS-FIBRE-REINFORCED PLASTIC COMPOSITES - PULTRUDED UNIDIRECTIONAL RODS - DETERMINATION OF TENSILE PROPERTIES IN PARALLEL TO THE FIBRE DIRECTION
I.S. EN 15383:2012 PLASTICS PIPING SYSTEMS FOR DRAINAGE AND SEWERAGE - GLASS-REINFORCED THERMOSETTING PLASTICS (GRP) BASED ON POLYESTER RESIN (UP) - MANHOLES AND INSPECTION CHAMBERS
10/30233182 DC : 0 BS EN 492 - FIBRE-CEMENT SLATES AND FITTINGS - PRODUCT SPECIFICATION AND TEST METHODS
06/30155782 DC : 0 BS EN 1170-8 - TEST METHOD FOR GLASS-FIBRE REINFORCED CEMENT - PART 8: CYCLIC WEATHERING TYPE TEST
10/30233189 DC : 0 BS EN 494 - FIBRE-CEMENT PROFILED SHEETS AND FITTINGS - PRODUCT SPECIFICATION AND TEST METHODS
10/30231817 DC : 0 BS EN 12705 - ADHESIVES FOR LEATHER AND FOOTWEAR MATERIALS - DETERMINATION OF COLOUR CHANGE OF WHITE OR BRIGHT COLOURED LEATHER SURFACES BY MIGRATION
BS ISO 11614:1999 Reciprocating internal combustion compression-ignition engines. Apparatus for measurement of the opacity and for determination of the light absorption coefficient of exhaust gas
ISO 25780:2011 Plastics piping systems for pressure and non-pressure water supply, irrigation, drainage or sewerage — Glass-reinforced thermosetting plastics (GRP) systems based on unsaturated polyester (UP) resin — Pipes with flexible joints intended to be installed using jacking techniques
ISO 29042-7:2010 Safety of machinery Evaluation of the emission of airborne hazardous substances Part 7: Test bench method for the measurement of the pollutant concentration parameter
DIN EN 15383:2014-02 PLASTICS PIPING SYSTEMS FOR DRAINAGE AND SEWERAGE - GLASS-REINFORCED THERMOSETTING PLASTICS (GRP) BASED ON POLYESTER RESIN (UP) - MANHOLES AND INSPECTION CHAMBERS
DIN EN 1006:2009-10 Advanced technical ceramics - Monolithic ceramics - Guidance on the selection of test pieces for the evaluation of properties
08/30188330 DC : DRAFT AUG 2008 BS EN ISO 178 - PLASTICS - DETERMINATION OF FLEXURAL PROPERTIES
DD ENV 1006:2003 Advanced technical ceramics. Monolithic ceramics. Guidance on the selection of test pieces for the evaluation of properties
18/30333968 DC : 0 BS ISO 8573-4 - COMPRESSED AIR - CONTAMINANT MEASUREMENT - PART 4: PARTICLE CONTENT
BIS IS 13360-5-4 : 2013 PLASTICS - METHODS OF TESTING - PART 5: MECHANICAL PROPERTIES - SECTION 4: DETERMINATION OF IZOD IMPACT STRENGTH
BS ISO 16269-6:2014 Statistical interpretation of data Determination of statistical tolerance intervals
08/30185918 DC : 0 BS EN 1006 - ADVANCED TECHNICAL CERAMICS - MONOLITHIC CERAMICS - GUIDANCE ON THE SELECTION OF TEST PIECES FOR THE EVALUATION OF PROPERTIES
CSA ISO/TR 10017 : 2003 : R2013 GUIDANCE ON STATISTICAL TECHNIQUES FOR ISO 9001:2000
ISO 4582:2017 Plastics — Determination of changes in colour and variations in properties after exposure to glass-filtered solar radiation, natural weathering or laboratory radiation sources
UNE-ISO 2230:2012 Rubber products. Guidelines for storage
I.S. EN ISO 15012-2:2008 HEALTH AND SAFETY IN WELDING AND ALLIED PROCESSES - REQUIREMENTS, TESTING AND MARKING OF EQUIPMENT FOR AIR FILTRATION - PART 2: DETERMINATION OF THE MINIMUM AIR VOLUME FLOW RATE OF CAPTOR HOODS AND NOZZLES
I.S. EN 16480:2016 PUMPS - MINIMUM REQUIRED EFFICIENCY OF ROTODYNAMIC WATER PUMPS
UNI ISO 4037-2 : 2009 X AND GAMMA REFERENCE RADIATION FOR CALIBRATING DOSEMETERS AND DOSERATE METERS AND FOR DETERMINING THEIR RESPONSE AS A FUNCTION OF PHOTON ENERGY - PART 2: DOSIMETRY FOR RADIATION PROTECTION OVER THE ENERGY RANGES 8 KEV TO 1,3 MEV AND 4 MEV TO 9 MEV
I.S. EN ISO 19085-3:2017 WOODWORKING MACHINES - SAFETY REQUIREMENTS - PART 3: NUMERICALLY CONTROLLED (NC) BORING AND ROUTING MACHINES (ISO 19085-3:2017)
BS ISO 4603 : 1993 TEXTILE GLASS - WOVEN FABRICS - DETERMINATION OF THICKNESS
I.S. EN 12467:2012 FIBRE-CEMENT FLAT SHEETS - PRODUCT SPECIFICATION AND TEST METHODS
ISO 5667-12:2017 Water quality — Sampling — Part 12: Guidance on sampling of bottom sediments from rivers, lakes and estuarine areas
UNE-EN 16480:2016 Pumps - Minimum required efficiency of rotodynamic water pumps
ISO 16269-6:2014 Statistical interpretation of data — Part 6: Determination of statistical tolerance intervals
ISO 12828-2:2016 Validation method for fire gas analysis Part 2: Intralaboratory validation of quantification methods
UNI EN 15383 : 2013-11 PLASTICS PIPING SYSTEMS FOR DRAINAGE AND SEWERAGE - GLASS-REINFORCED THERMOSETTING PLASTICS (GRP) BASED ON POLYESTER RESIN (UP) - MANHOLES AND INSPECTION CHAMBERS
EN ISO 178:2010/A1:2013 PLASTICS - DETERMINATION OF FLEXURAL PROPERTIES (ISO 178:2010/AMD 1:2013)
PREN 16770 : DRAFT 2014 SAFETY OF WOODWORKING MACHINES - CHIP AND DUST EXTRACTION SYSTEMS FOR INDOOR INSTALLATION - SAFETY REQUIREMENTS
ASTM D 5941 : 1996 Standard Test Method for Determination of Izod Impact Strength (Withdrawn 1998)
I.S. EN ISO 180:2001 PLASTICS - DETERMINATION OF IZOD IMPACT STRENGTH (ISO 180:2000)
ISO 5082:1982 Textiles Woven fabrics Determination of breaking strength Grab method
I.S. EN ISO 527-1:2012 PLASTICS - DETERMINATION OF TENSILE PROPERTIES - PART 1: GENERAL PRINCIPLES (ISO 527-1:2012)
DIN EN ISO 10456:2010-05 Building materials and products - Hygrothermal properties - Tabulated design values and procedures for determining declared and design thermal values (ISO 10456:2007 + Cor. 1:2009); German version EN ISO 10456:2007 + AC:2009
DIN EN ISO 4674-1:2015-04 (Draft) RUBBER- OR PLASTICS-COATED FABRICS - DETERMINATION OF TEAR RESISTANCE - PART 1: CONSTANT RATE OF TEAR METHODS (ISO 4674-1:2016)
13/30280057 DC : 0 BS EN 13782 - TEMPORARY STRUCTURE - TENTS - SAFETY
BS EN 1093-8 : 1999 SAFETY OF MACHINERY - EVALUATION OF THE EMISSION OF AIRBORNE HAZARDOUS SUBSTANCES - PART 8: POLLUTANT CONCENTRATION PARAMETER, TEST BENCH METHOD
UNE-EN ISO 6259-1:2015 Thermoplastics pipes - Determination of tensile properties - Part 1: General test method (ISO 6259-1:2015)
BS EN ISO 604:2003 Plastics. Determination of compressive properties
BS EN 326-2 : 2010 WOOD-BASED PANELS - SAMPLING, CUTTING AND INSPECTION - PART 2: INITIAL TYPE TESTING AND FACTORY PRODUCTION CONTROL
UNE-EN 60335-2-69:2013 Household and similar electrical appliances - Safety - Part 2-69: Particular requirements for wet and dry vacuum cleaners, including power brush for commercial use
BS EN ISO 4674-1:2016 Rubber- or plastics-coated fabrics. Determination of tear resistance Constant rate of tear methods
DIN EN 1170-8 :2009-05 TEST METHOD FOR GLASS-FIBRE REINFORCED CEMENT - PART 8: CYCLIC WEATHERING TYPE TEST
EN ISO 10456:2007/AC:2009 BUILDING MATERIALS AND PRODUCTS - HYGROTHERMAL PROPERTIES - TABULATED DESIGN VALUES AND PROCEDURES FOR DETERMINING DECLARED AND DESIGN THERMAL VALUES
DIN EN 13923:2006-02 Filament-wound FRP pressure vessels - Materials, design, manufacturing and testing
EN 12705:2011 Adhesives for leather and footwear materials - Determination of colour change of white or bright coloured leather surfaces by migration
EN 16480:2016 Pumps - Minimum required efficiency of rotodynamic water pumps
EN 1170-8:2008 Test method for glass-fibre reinforced cement - Part 8: Cyclic weathering type test
EN 1093-8:1998+A1:2008 Safety of machinery - Evaluation of the emission of airborne hazardous substances - Part 8: Pollutant concentration parameter, test bench method
EN 1093-9:1998+A1:2008 Safety of machinery - Evaluation of the emission of airborne hazardous substances - Part 9: Pollutant concentration parameter, room method
EN 12779:2015 Safety of woodworking machines - Chip and dust extraction systems with fixed installation - Safety requirements
DIN EN ISO 178:2013-09 PLASTICS - DETERMINATION OF FLEXURAL PROPERTIES (ISO 178:2010 + AMD.1:2013)
EN 1006:2009 Advanced technical ceramics - Monolithic ceramics - Guidance on the selection of test pieces for the evaluation of properties
EN 12763:2000 Fibre-cement pipes and fittings for discharge systems for buildings - Dimensions and technical terms of delivery
EN 1013-3:1997 Light transmitting profiled plastic sheeting for single skin roofing - Part 3: Specific requirements and test methods for sheets of polyvinyl chloride (PVC)
NF EN ISO 6603-2 : 2002 PLASTICS - DETERMINATION OF PUNCTURE IMPACT BEHAVIOUR OF RIGID PLASTICS - PART 2: INSTRUMENTED PUNCTURE TEST
ONORM EN ISO 179-1 : 2010 PLASTICS - DETERMINATION OF CHARPY IMPACT PROPERTIES - PART 1: NON-INSTRUMENTED IMPACT TEST
I.S. EN ISO 6603-2:2000 PLASTICS - DETERMINATION OF PUNCTURE IMPACT BEHAVIOUR OF RIGID PLASTICS - PART 2: INSTRUMENTED PUNCTURE TEST
NF EN ISO 179-1 : 2010 PLASTICS - DETERMINATION OF CHARPY IMPACT PROPERTIES - PART 1: NON-INSTRUMENTED IMPACT TEST
DIN EN 16480 E : 2017 PUMPS - MINIMUM REQUIRED EFFICIENCY OF ROTODYNAMIC WATER PUMPS
I.S. EN 1482-1:2007 FERTILIZERS AND LIMING MATERIALS - SAMPLING AND SAMPLE PREPARATION - PART 1: SAMPLING
17/30335786 DC : 0 BS ISO 19867-1 - CLEAN COOKSTOVES AND CLEAN COOKING SOLUTIONS - HARMONIZED LABORATORY TEST PROTOCOLS - PART 1: STANDARD TEST SEQUENCE FOR EMISSIONS AND PERFORMANCE, SAFETY AND DURABILITY
BS ISO 15592-1:2001 Fine-cut tobacco and smoking articles made from it. Methods of sampling, conditioning and analysis Sampling
I.S. EN 843-5:2006 ADVANCED TECHNICAL CERAMICS - MECHANICAL PROPERTIES OF MONOLITHIC CERAMICS AT ROOM TEMPERATURE - PART 5: STATISTICAL ANALYSIS
BS EN ISO 15012-4:2016 Health and safety in welding and allied processes. Equipment for capture and separation of welding fume General requirements
UNE 116005:2012 Manufacturing by additive of caps on plastics. Additive manufacturing. Preparation of test pieces
DIN EN ISO 178 E : 2013 PLASTICS - DETERMINATION OF FLEXURAL PROPERTIES (ISO 178:2010 + AMD.1:2013)
BS ISO 5667-12:2017 Water quality. Sampling Guidance on sampling of bottom sediments from rivers, lakes and estuarine areas
17/30342172 DC : 0 BS ISO 20975-2 - CARBON-FIBRE-REINFORCED PLASTICS - METHODS FOR MEASUREMENT OF THROUGH-THICKNESS LAMINATE PROPERTIES - PART 2: CONSIDERING SIZE EFFECTS BY FLEXURAL TEST
07/30175034 DC : DRAFT DEC 2007 BS ISO 18352 - CARBON-FIBRE-REINFORCED PLASTICS - DETERMINATION OF COMPRESSION-AFTER-IMPACT PROPERTIES AT A SPECIFIED IMPACT ENERGY LEVEL
11/30196210 DC : 0 BS ISO 12815 - FIBRE-REINFORCED PLASTIC COMPOSITES - DETERMINATION OF PLAIN-PIN BEARING STRENGTH
ISO 12500-2:2007 Filters for compressed air — Test methods — Part 2: Oil vapours
10/30237537 DC : 0 EN 15383 - PLASTICS PIPING SYSTEMS FOR DRAINAGE AND SEWERAGE - GLASS-REINFORCED THERMOSETTING PLASTICS (GRP) BASED ON POLYESTER RESIN (UP) - MANHOLES AND INSPECTION CHAMBERS
DD ENV 1170-8:1997 Precast concrete products. Test method for glass-fibre reinforced cement Cyclic weathering type test
12/30242633 DC : 0 BS ISO 16269-6 - STATISTICAL INTERPRETATION OF DATA - PART 6: DETERMINATION OF STATISTICAL TOLERANCE INTERVALS
BS ISO 8243:2013 Cigarettes. Sampling
PD IEC/TS 62282-7-2:2014 Fuel cell technologies Test methods. Single cell and stack performance tests for solid oxide fuel cells (SOFC)
13/30254060 DC : 0 BS EN ISO 15012-4 - HEALTH AND SAFETY IN WELDING AND ALLIED PROCESSES - EQUIPMENT FOR CAPTURE AND SEPARATION OF WELDING FUME - PART 4: DESIGN REQUIREMENTS
05/30135474 DC : DRAFT JUNE 2005 BS 600 - A GUIDE TO THE APPLICATION OF STATISTICAL METHODS TO QUALITY AND STANDARDIZATION
BS ISO 7183:2007 Compressed-air dryers. Specifications and testing
08/30192288 DC : 0 BS EN ISO 179-1 - PLASTICS - DETERMINATION OF CHARPY IMPACT PROPERTIES - PART 1: NON-INSTRUMENTED IMPACT TEST
08/30168462 DC : DRAFT APR 2008 BS ISO 1217 - DISPLACEMENT COMPRESSORS - ACCEPTANCE TEST
BS EN ISO 15012-2:2008 Health and safety in welding and allied processes. Requirements, testing and marking of equipment for air filtration Determination of the minimum air volume flow rate of captor hoods and nozzles
BS ISO 10054:1998 Internal combustion compression-ignition engines. Measurement apparatus for smoke from engines operating under steady-state conditions. Filter type smokemeter
14/30298580 DC : 0 BS EN 16480 - PUMPS - MINIMUM REQUIRED EFFICIENCY OF ROTODYNAMIC WATER PUMPS
04/30124932 DC : DRAFT NOV 2004 ISO 11554 - OPTICS AND OPTICAL INSTRUMENTS - LASERS AND LASER-RELATED EQUIPMENT - TEST METHODS FOR LASER BEAM POWER, ENERGY AND TEMPORAL CHARACTERISTICS
00/709413 DC : 0 BS EN ISO 15012-2 - HEALTH AND SAFETY IN WELDING AND ALLIED PROCESSES - REQUIREMENTS, TESTING AND MARKING OF EQUIPMENT FOR AIR FILTRATION - PART 2: TESTING OF THE CAPTURE ZONE OF WELDING FUME EXTRACTION DEVICES
CEI EN 60335-2-69 : 2014 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-69: PARTICULAR REQUIREMENTS FOR WET AND DRY VACUUM CLEANERS, INCLUDING POWER BRUSH, FOR COMMERCIAL USE
PREN 492 : DRAFT 2010 FIBRE-CEMENT SLATES AND FITTINGS - PRODUCT SPECIFICATION AND TEST METHODS
I.S. EN 1006:2009 ADVANCED TECHNICAL CERAMICS - MONOLITHIC CERAMICS - GUIDANCE ON THE SELECTION OF TEST PIECES FOR THE EVALUATION OF PROPERTIES
I.S. EN ISO 178:2010 PLASTICS - DETERMINATION OF FLEXURAL PROPERTIES (ISO 178:2010)
ISO 7772-1:1998 Assessment of industrial laundry machinery by its effect on textiles Part 1: Washing machines
17/30367211 DC : 0 BS EN 16480 - PUMPS - ROTODYNAMIC PUMPS - MINIMUM REQUIRED EFFICIENCY OF WATER PUMPS AND METHODS OF QUALIFICATION AND VERIFICATION
CGSB 176.2-1 : 1996 METHODS OF SAMPLING AND TESTING TOBACCO - DETERMINATION OF BENZO[A]PYRENE IN TOTAL PARTICULATE MATTER OF TOBACCO SMOKE
ISO 10576-1:2003 Statistical methods — Guidelines for the evaluation of conformity with specified requirements — Part 1: General principles
NF EN 1170-8 : 2008 TEST METHOD FOR GLASS-FIBRE REINFORCED CEMENT - PART 8: CYCLIC WEATHERING TYPE TEST
BS EN 60335-2-69:2012 Household and similar electrical appliances. Safety Particular requirements for wet and dry vacuum cleaners, including power brush for commercial use
ISO 19213:2017 Implants for surgery — Test methods of material for use as a cortical bone model
ISO 19867-1:2018 Clean cookstoves and clean cooking solutions — Harmonized laboratory test protocols — Part 1: Standard test sequence for emissions and performance, safety and durability
ISO 2230:2002 Rubber products — Guidelines for storage
I.S. EN ISO 11554:2017 OPTICS AND PHOTONICS - LASERS AND LASER-RELATED EQUIPMENT - TEST METHODS FOR LASER BEAM POWER, ENERGY AND TEMPORAL CHARACTERISTICS (ISO 11554:2017)
BS EN 492 : 2012 FIBRE-CEMENT SLATES AND FITTINGS - PRODUCT SPECIFICATION AND TEST METHODS
NF ISO 15310 : 2001 COMPOSITES PLASTIQUES RENFORCES DE FIBRES - DETERMINATION DU MODULE DE CISAILLEMENT DANS LE PLAN PAR LA METHODE DE TORSION DE PLAQUE
EN 12467:2012+A2:2018 Fibre-cement flat sheets - Product specification and test methods
PREN 16480 : DRAFT 2017 PUMPS - ROTODYNAMIC PUMPS - MINIMUM REQUIRED EFFICIENCY OF WATER PUMPS AND METHODS OF QUALIFICATION AND VERIFICATION
ISO 16269-8:2004 Statistical interpretation of data — Part 8: Determination of prediction intervals
ISO 7183:2007 Compressed-air dryers Specifications and testing
ISO 527-1:2012 Plastics Determination of tensile properties Part 1: General principles
DIN EN 1392:2006-08 Adhesives for leather and footwear materials - Solvent-based and dispersion adhesives - Testing of bond strength under specified conditions
DIN EN 12705:2011-08 Adhesives for leather and footwear materials - Determination of colour change of white or bright coloured leather surfaces by migration
DIN EN ISO 6603-2 E : 2002 DETERMINATION OF MULTIAXIAL IMPACT BEHAVIOUR OF RIGID PLASTICS - PART 2: INSTRUMENTED PUNCTURE TEST
DIN EN 326-2:2014-10 Wood-based panels - Sampling, cutting and inspection - Part 2: Initial type testing and factory production control; German version EN 326-2:2010+A1:2014
BS EN ISO 180 : 2001 PLASTICS - DETERMINATION OF IZOD IMPACT STRENGTH
BS EN 843-5:2006 Advanced technical ceramics. Mechanical properties of monolithic ceramics at room temperature Statistical analysis
ISO 10456:2007 Building materials and products — Hygrothermal properties — Tabulated design values and procedures for determining declared and design thermal values
BS EN ISO 6603-2:2000 Plastics. Determination of multi-axial impact behaviour of rigid plastics Instrumented puncture testing
BS EN 1244:1998 Adhesives. Determination of the colour and/or colour changes of adhesive coats under the influence of light
BS EN ISO 14125 : 1998 FIBRE-REINFORCED PLASTIC COMPOSITES - DETERMINATION OF FLEXURAL PROPERTIES
BS EN ISO 14129:1998 Fibre-reinforced plastic composites. Determination of the in-plane shear stress/shear strain response, including the in-plane shear modulus and strength by the ± 45° tension test method
ISO 15310:1999 Fibre-reinforced plastic composites Determination of the in-plane shear modulus by the plate twist method
I.S. EN ISO 10456:2007 BUILDING MATERIALS AND PRODUCTS - HYGROTHERMAL PROPERTIES - TABULATED DESIGN VALUES AND PROCEDURES FOR DETERMINING DECLARED AND DESIGN THERMAL VALUES
DIN EN ISO 6259-1:2002-02 THERMOPLASTICS PIPES - DETERMINATION OF TENSILE PROPERTIES - PART 1: GENERAL TEST METHOD
I.S. EN ISO 5079:1996 TEXTILES - FIBRES - DETERMINATION OF BREAKING FORCE AND ELONGATION AT BREAK OF INDIVIDUAL FIBRES
I.S. EN ISO 15012-1:2013 HEALTH AND SAFETY IN WELDING AND ALLIED PROCESSES - EQUIPMENT FOR CAPTURE AND SEPARATION OF WELDING FUME - PART 1: REQUIREMENTS FOR TESTING AND MARKING OF SEPARATION EFFICIENCY (ISO 15012-1:2013)
DIN EN 16480:2017-07 Pumps - Minimum required efficiency of rotodynamic water pumps
I.S. EN ISO 179-1:2010 PLASTICS - DETERMINATION OF CHARPY IMPACT PROPERTIES - PART 1: NON-INSTRUMENTED IMPACT TEST
I.S. EN 13782:2015 TEMPORARY STRUCTURES - TENTS - SAFETY
I.S. EN 1392:2006 ADHESIVES FOR LEATHER AND FOOTWEAR MATERIALS - SOLVENT-BASED AND DISPERSION ADHESIVES - TESTING OF BOND STRENGTH UNDER SPECIFIED CONDITIONS
I.S. EN ISO 4674-1:2016 RUBBER- OR PLASTICS-COATED FABRICS - DETERMINATION OF TEAR RESISTANCE - PART 1: CONSTANT RATE OF TEAR METHODS (ISO 4674-1:2016)
I.S. EN ISO 8256:2004 PLASTICS - DETERMINATION OF TENSILE-IMPACT STRENGTH
I.S. EN 1093-8:1999 SAFETY OF MACHINERY - EVALUATION OF THE EMISSION OF AIRBORNE HAZARDOUS SUBSTANCES - PART 8: POLLUTANT CONCENTRATION PARAMETER, TEST BENCH METHOD
I.S. EN ISO 5667-1:2006 WATER QUALITY - SAMPLING - PART 1: GUIDANCE ON THE DESIGN OF SAMPLING PROGRAMMES AND SAMPLING TECHNIQUES
I.S. EN 12779:2015 SAFETY OF WOODWORKING MACHINES - CHIP AND DUST EXTRACTION SYSTEMS WITH FIXED INSTALLATION - SAFETY RELATED PERFORMANCES AND SAFETY REQUIREMENTS
I.S. EN ISO 6259-1:2015 THERMOPLASTICS PIPES - DETERMINATION OF TENSILE PROPERTIES - PART 1: GENERAL TEST METHOD (ISO 6259-1:2015)
I.S. EN ISO 604:2003 PLASTICS - DETERMINATION OF COMPRESSIVE PROPERTIES
I.S. EN 12705:2011 ADHESIVES FOR LEATHER AND FOOTWEAR MATERIALS - DETERMINATION OF COLOUR CHANGE OF WHITE OR BRIGHT COLOURED LEATHER SURFACES BY MIGRATION
I.S. EN 494:2012 FIBRE-CEMENT PROFILED SHEETS AND FITTINGS - PRODUCT SPECIFICATION AND TEST METHODS
I.S. EN 326-2:2010 WOOD-BASED PANELS - SAMPLING, CUTTING AND INSPECTION - PART 2: INITIAL TYPE TESTING AND FACTORY PRODUCTION CONTROL
I.S. EN 1093-9:1999 SAFETY OF MACHINERY - EVALUATION OF THE EMISSION OF AIRBORNE HAZARDOUS SUBSTANCES - PART 9: POLLUTANT CONCENTRATION PARAMETER, ROOM METHOD
UNI EN ISO 15012-1 : 2013 HEALTH AND SAFETY IN WELDING AND ALLIED PROCESSES - EQUIPMENT FOR CAPTURE AND SEPARATION OF WELDING FUME - PART 1: REQUIREMENTS FOR TESTING AND MARKING OF SEPARATION EFFICIENCY
UNI ISO/TR 18532 : 2010 Guide to the application of statistical methods for quality and standardization in the industrial sector
BS 2782-5:Method 552A:1999 Methods of testing plastics. Optical and colour properties, weathering Determination of changes in colour and variations in properties after exposure to daylight under glass, natural weathering or laboratory light sources
BS EN 12467 : 2012 FIBRE-CEMENT FLAT SHEETS - PRODUCT SPECIFICATION AND TEST METHODS
BS EN ISO 178 : 2010 PLASTICS - DETERMINATION OF FLEXURAL PROPERTIES
DIN ISO 15592-1:2005-05 Fine-cut tobacco and smoking articles made from it - Methods of sampling, conditioning and analysis - Part 1: Sampling (ISO 15592-1:2001)
ISO 11614:1999 Reciprocating internal combustion compression-ignition engines Apparatus for measurement of the opacity and for determination of the light absorption coefficient of exhaust gas
04/30125776 DC : DRAFT NOV 2004 EN 843-5 - ADVANCED TECHNICAL CERAMICS - MONOLITHIC CERAMICS - MECHANICAL PROPERTIES AT ROOM TEMPERATURE - PART 5: STATISTICAL ANALYSIS
04/30123559 DC : DRAFT OCT 2004 EN 1392 - ADHESIVES FOR LEATHER AND FOOTWEAR MATERIALS - SOLVENT-BASED AND DISPERSION ADHESIVES - TESTING OF BOND STRENGTH UNDER SPECIFIC CONDITIONS
BS ISO 8573-5:2001 Compressed air Test methods for oil vapour and organic solvent content
XP X30 473 : 2008 XP HOUSEHOLD AND RELATED WASTE - INSPECTION OF SORTING EQUIPMENT PERFORMANCE
ISO 4603:1993 Textile glass — Woven fabrics — Determination of thickness
BS ISO 8096:2005 Rubber- or plastics-coated fabrics for water resistant clothing. Specification
PREN 12467 : DRAFT 2010 FIBRE-CEMENT FLAT SHEETS - PRODUCT SPECIFICATION AND TEST METHODS
01/120080 DC : DRAFT JAN 2001 BS EN 13923 - FILAMENT WOUND FRP PRESSURE VESSELS - MATERIALS, DESIGN, CALCULATION, MANUFACTURING AND TESTING
UNE-ISO 16269-6:2015 Statistical interpretation of data - Part 6: Determination of statistical tolerance intervals
BS ISO 25780:2011 Plastics piping systems for pressure and non-pressure water supply, irrigation, drainage or sewerage. Glass-reinforced thermosetting plastics (GRP) systems based on unsaturated polyester (UP) resin. Pipes with flexible joints intended to be installed using jacking techniques
BS EN 1170-8:2008 Test method for glass-fibre reinforced cement Cyclic weathering type test
BS EN 1006:2009 Advanced technical ceramics. Monolithic ceramics. Guidance on the selection of test pieces for the evaluation of properties
09/30179548 DC : DRAFT AUG 2009 BS ISO 10904 - FIBRE-CEMENT CORRUGATED SHEETS AND FITTINGS FOR ROOFING AND CLADDING
BS ISO 15310 : 1999 AMD 15944 REINFORCED PLASTICS - DETERMINATION OF THE IN-PLANE SHEAR MODULUS BY THE PLATE TWIST METHOD
16/30269189 DC : DRAFT JAN 2016 BS ISO 5667-12 - WATER QUALITY - SAMPLING - PART 12: GUIDANCE ON SAMPLING OF BOTTOM SEDIMENTS
BS 6068-6.1(1981) : AMD 7435 WATER QUALITY - SAMPLING - GUIDANCE ON THE DESIGN OF SAMPLING PROGRAMMES
98/100165 DC : DRAFT FEB 1998 BS EN 326-2 - WOOD-BASED PANELS - SAMPLING, CUTTING AND INSPECTION - PART 2: QUALITY CONTROL IN THE FACTORY
02/120706 DC : DRAFT FEB 2002 BS EN ISO 8256 - PLASTICS - DETERMINATION OF TENSILE-IMPACT STRENGTH
ISO/TR 18532:2009 Guidance on the application of statistical methods to quality and to industrial standardization
00/709412 DC : DRAFT MAY 2000 BS EN ISO 15012-1 - HEALTH AND SAFETY IN WELDING AND ALLIED PROCESSES - REQUIREMENTS, TESTING AND MARKING OF EQUIPMENT FOR AIR FILTRATION - PART 1: TESTING OF THE SEPARATION EFFICIENCY FOR WELDING FUME
PREN 12779 : DRAFT 2014 SAFETY OF WOODWORKING MACHINES - CHIPS AND DUST EXTRACTION SYSTEMS WITH FIXED INSTALLATIONS - SAFETY REQUIREMENTS
IEC 60335-2-69:2016 RLV Household and similar electrical appliances - Safety - Part 2-69: Particular requirements for wet and dry vacuum cleaners, including power brush, for commercial use
BS ISO 1217 : 2009 DISPLACEMENT COMPRESSORS - ACCEPTANCE TESTS
ISO 8336:2017 Fibre-cement flat sheets — Product specification and test methods
ASTM D 5938 : 1996 Standard Test Method for Determination of Tensile Properties (Withdrawn 1998)
EN ISO 19085-3:2017 Woodworking machines - Safety requirements - Part 3: Numerically controlled (NC) boring and routing machines (ISO 19085-3:2017)
ISO 12815:2013 Fibre-reinforced plastic composites — Determination of plain-pin bearing strength
UNI EN ISO 178 : 2013 PLASTICS - DETERMINATION OF FLEXURAL PROPERTIES
UNI EN 1170-8 : 2009 TEST METHOD FOR GLASS-FIBRE REINFORCED CEMENT - PART 8: CYCLIC WEATHERING TYPE TEST
UNE-ISO 15592-1:2012 Fine-cut tobacco and smoking articles made from it -- Methods of sampling, conditioning and analysis -- Part 1: Sampling
ISO 8096:2005 Rubber- or plastics-coated fabrics for water-resistant clothing — Specification
ISO 12500-1:2007 Filters for compressed air Test methods Part 1: Oil aerosols
ISO 5667-10:1992 Water quality Sampling Part 10: Guidance on sampling of waste waters
NF EN ISO 180 : 2001 AMD 2 2013 PLASTICS - DETERMINATION OF IZOD IMPACT STRENGTH
ISO 5081:1977 Textiles Woven fabrics Determination of breaking strength and elongation (Strip method)
ISO 16269-7:2001 Statistical interpretation of data — Part 7: Median — Estimation and confidence intervals
ONORM EN ISO 527-1 : 2012 PLASTICS - DETERMINATION OF TENSILE PROPERTIES - PART 1: GENERAL PRINCIPLES (ISO 527-1:2012)
IEC 60335-2-69:2016 Household and similar electrical appliances - Safety - Part 2-69: Particular requirements for wet and dry vacuum cleaners, including power brush, for commercial use
EN ISO 14125:1998/A1:2011 FIBRE-REINFORCED PLASTIC COMPOSITES - DETERMINATION OF FLEXURAL PROPERTIES
DIN EN 12779:2016-03 Safety of woodworking machines - Chip and dust extraction systems with fixed installation - Safety requirements
DIN EN 1093-8:2008-11 SAFETY OF MACHINERY - EVALUATION OF THE EMISSION OF AIRBORNE HAZARDOUS SUBSTANCES - PART 8: POLLUTANT CONCENTRATION PARAMETER - TEST BENCH METHOD
DIN EN ISO 8256:2005-05 Plastics - Determination of tensile-impact strength (ISO 8256:2004); German version EN ISO 8256:2004
DIN EN 494:2015-12 FIBRE-CEMENT PROFILED SHEETS AND FITTINGS - PRODUCT SPECIFICATION AND TEST METHODS
DIN EN ISO 15012-1:2013-08 HEALTH AND SAFETY IN WELDING AND ALLIED PROCESSES - EQUIPMENT FOR CAPTURE AND SEPARATION OF WELDING FUME - PART 1: REQUIREMENTS FOR TESTING AND MARKING OF SEPARATION EFFICIENCY (ISO 15012-1:2013)
DIN EN 13782:2015-06 TEMPORARY STRUCTURE - TENTS - SAFETY
BS EN 1392:2006 Adhesives for leather and footwear materials. Solvent-based and dispersion adhesives. Testing of bond strength under specified conditions
UNE-EN ISO 10456:2012 Building materials and products - Hygrothermal properties -Tabulated design values and procedures for determining declared and design thermal values (ISO 10456:2007)
BS EN ISO 8256:2004 Plastics. Determination of tensile-impact strength
DIN EN ISO 180:2013-08 PLASTICS - DETERMINATION OF IZOD IMPACT STRENGTH (ISO 180:2000 + AMD.1:2006 + AMD.2:2013)
ISO 14125:1998 Fibre-reinforced plastic composites Determination of flexural properties
BS EN 494 : 2012 FIBRE-CEMENT PROFILED SHEETS AND FITTINGS - PRODUCT SPECIFICATION AND TEST METHODS
UNI EN ISO 180 : 2013 PLASTICS - DETERMINATION OF IZOD IMPACT STRENGTH
EN ISO 5079:1995 TEXTILES - FIBRES - DETERMINATION OF BREAKING FORCE AND ELONGATION AT BREAK OF INDIVIDUAL FIBRES
EN ISO 15012-4:2016 Health and safety in welding and allied processes - Equipment for capture and separation of welding fume - Part 4: General requirements (ISO 15012-4:2016)
UNI EN ISO 14125 : 2011 FIBRE-REINFORCED PLASTIC COMPOSITES - DETERMINATION OF FLEXURAL PROPERTIES
UNI EN 12705 : 2011 ADHESIVES FOR LEATHER AND FOOTWEAR MATERIALS - DETERMINATION OF COLOUR CHANGE OF WHITE OR BRIGHT COLOURED LEATHER SURFACES BY MIGRATION
UNI EN 1093-9 : 2008 SAFETY OF MACHINERY - EVALUATION OF THE EMISSION OF AIRBORNE HAZARDOUS SUBSTANCES - PART 9: POLLUTANT CONCENTRATION PARAMETER, ROOM METHOD
BS 4200-3:1979 Guide on the reliability of electronic equipment and parts used therein Presentation of reliability data on electronic components (or parts)
BS 2846-8:2001 Guide to statistical interpretation of data Median. Estimation and confidence intervals
UNI EN 326-2 : 2014 WOOD-BASED PANELS - SAMPLING, CUTTING AND INSPECTION - PART 2: INITIAL TYPE TESTING AND FACTORY PRODUCTION CONTROL
I.S. EN ISO 14125:1998 FIBRE-REINFORCED PLASTIC COMPOSITES - DETERMINATION OF FLEXURAL PROPERTIES
I.S. EN ISO 14126:2000 FIBRE-REINFORCED PLASTIC COMPOSITES - DETERMINATION OF COMPRESSIVE PROPERTIES IN THE IN-PLANE DIRECTION
BS 2782-3.335A(1993) : AMD 8638 METHODS OF TESTING PLASTICS - MECHANICAL PROPERTIES - DETERMINATION OF FLEXURAL PROPERTIES
UNI EN ISO 604 : 2008 PLASTICS - DETERMINATION OF COMPRESSIVE PROPERTIES
UNI EN ISO 10456 : 2008 BUILDING MATERIALS AND PRODUCTS - HYGROTHERMAL PROPERTIES - TABULATED DESIGN VALUES AND PROCEDURES FOR DETERMINING DECLARED AND DESIGN THERMAL VALUES
UNI EN 1093-8 : 2008 SAFETY OF MACHINERY - EVALUATION OF THE EMISSION OF AIRBORNE HAZARDOUS SUBSTANCES - PART 8: POLLUTANT CONCENTRATION PARAMETER, TEST BENCH METHOD
UNI EN ISO 527-1 : 2012 PLASTICS - DETERMINATION OF TENSILE PROPERTIES - PART 1: GENERAL PRINCIPLES
UNI EN ISO 179-1 : 2010 PLASTICS - DETERMINATION OF CHARPY IMPACT PROPERTIES - PART 1: NON-INSTRUMENTED IMPACT TEST
UNI ISO 2230 : 2009 RUBBER PRODUCTS - GUIDELINES FOR STORAGE
DIN 53812 : DRAFT 93 TEXTILES; FIBRES; DETERMINATION OF LINEAR DENSITY; GRAVIMETRIC METHOD AND VIBROSCOPE METHOD
IEC 60335-2-69 REDLINE : 5.0 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-69: PARTICULAR REQUIREMENTS FOR WET AND DRY VACUUM CLEANERS, INCLUDING POWER BRUSH, FOR COMMERCIAL USE
NF ISO 12500-1 : 2007 FILTERS FOR COMPRESSED AIR - TEST METHODS - PART 1: OIL AEROSOLS
BS ISO 16269-8:2004 Statistical interpretation of data Determination of prediction intervals
BS EN 16480:2016 Pumps. Minimum required efficiency of rotodynamic water pumps
16/30315531 DC : 0 BS ISO 4582 - PLASTICS - DETERMINATION OF CHANGES IN COLOUR AND VARIATIONS IN PROPERTIES AFTER EXPOSURE TO DAYLIGHT UNDER GLASS, NATURAL WEATHERING OR LABORATORY LIGHT SOURCES
10/30233185 DC : 0 BS EN 12467 - FIBRE-CEMENT FLAT SHEETS - PRODUCT SPECIFICATION AND TEST METHODS
UNI EN 1006 : 2009 ADVANCED TECHNICAL CERAMICS - MONOLITHIC CERAMICS - GUIDANCE ON THE SELECTION OF TEST PIECES FOR THE EVALUATION OF PROPERTIES
DIN EN 15383 E : 2014 PLASTICS PIPING SYSTEMS FOR DRAINAGE AND SEWERAGE - GLASS-REINFORCED THERMOSETTING PLASTICS (GRP) BASED ON POLYESTER RESIN (UP) - MANHOLES AND INSPECTION CHAMBERS
09/30190926 DC : 0 BS ISO 29042-7 - SAFETY OF MACHINERY - EVALUATION OF THE EMISSION OF AIRBORNE HAZARDOUS SUBSTANCES - PART 7: TEST BENCH METHOD FOR THE MEASUREMENT OF THE POLLUTANT CONCENTRATION PARAMETER
05/30136177 DC : DRAFT JULY 2005 EN 1482-1 - FERTILIZERS AND LIMING MATERIALS - SAMPLING AND SAMPLE PREPARATION - PART 1: SAMPLING
UNE-EN 492:2013 Fibre-cement slates and fittings - Product specification and test methods
BS ISO 9163 : 1996 AMD 10351 TEXTILE GLASS - ROVINGS - MANUFACTURE OF TEST SPECIMENS AND DETERMINATION OF TENSILE STRENGTH OF IMPREGNATED ROVINGS
DD ENV 843-5:1997 Advanced technical ceramics. Monolithic ceramics. Mechanical tests at room temperature. Statistical analysis
BS ISO 12815:2013 Fibre-reinforced plastic composites. Determination of plain-pin bearingstrength
14/30292850 DC : 0 BS EN 12779 - SAFETY OF WOODWORKING MACHINES - CHIPS AND DUST EXTRACTION SYSTEMS WITH FIXED INSTALLATIONS - SAFETY REQUIREMENTS
BS ISO 10904:2011 Fibre-cement corrugated sheets and fittings for roofing and cladding
16/30327521 DC : 0 BS EN ISO 11554 - LASER-RELATED EQUIPMENT - TEST METHODS FOR LASER BEAM POWER, ENERGY AND TEMPORAL CHARACTERISTICS
10/30216256 DC : 0 BS EN 60335-2-69 - HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-69: PARTICULAR REQUIREMENTS FOR WET AND DRY VACUUM CLEANERS, INCLUDING POWER BRUSH, FOR COMMERCIAL USE
ISO 1217:2009 Displacement compressors Acceptance tests
11/30242017 DC : 0 BS EN ISO 15012-1 - HEALTH AND SAFETY IN WELDING AND ALLIED PROCESSES - EQUIPMENT FOR CAPTURE AND SEPARATION OF WELDING FUME - PART 1: REQUIREMENTS FOR TESTING AND MARKING OF SEPARATION EFFICIENCY
12/30266246 DC : DRAFT SEP 2012 BS ISO 8243 - CIGARETTES - SAMPLING
I.S. EN 60335-2-69:2012 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-69: PARTICULAR REQUIREMENTS FOR WET AND DRY VACUUM CLEANERS, INCLUDING POWER BRUSH FOR COMMERCIAL USE (IEC 60335-2-69:2012 (MOD))
12/30227451 DC : DRAFT AUG 2012 BS EN 16480 - PUMPS - MINIMUM REQUIRED EFFICIENCY OF ROTODYNAMIC WATER PUMPS
15/30295526 DC : 0 BS EN ISO 4674-1 - RUBBER- OR PLASTICS-COATED FABRICS - DETERMINATION OF TEAR RESISTANCE - PART 1: CONSTANT RATE OF TEAR METHODS
BS EN 15383 : 2012 PLASTICS PIPING SYSTEMS FOR DRAINAGE AND SEWERAGE - GLASS-REINFORCED THERMOSETTING PLASTICS (GRP) BASED ON POLYESTER RESIN (UP) - MANHOLES AND INSPECTION CHAMBERS
BS ISO 8573-6:2003 Compressed air Test methods for gaseous contaminant content
07/30161814 DC : 0 BS EN 60335-2-69 AMD2 - HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-69: PARTICULAR REQUIREMENTS FOR WET AND DRY VACUUM CLEANERS, INCLUDING POWER BRUSH, FOR INDUSTRIAL AND COMMERCIAL USE
08/30195352 DC : 0 BS EN 60335-2-69 FPRAC - HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-69: PARTICULAR REQUIREMENTS FOR WET AND DRY VACUUM CLEANERS, INCLUDING POWERBRUSH, FOR INDUSTRIAL AND COMMERCIAL USE
17/30335677 DC : 0 BS EN ISO 178 - PLASTICS - DETERMINATION OF FLEXURAL PROPERTIES
09/30203717 DC : 0 BS ISO 4603:1993+AMD1 - TEXTILE GLASS - WOVEN FABRICS - DETERMINATION OF THICKNESS
BS ISO 19003:2006 Rubber and rubber products. Guidance on the application of statistics to physical testing
PD ISO/TR 10017:2003 Guidance on statistical techniques for ISO 9001:2000
DIN EN ISO 5667-1:2007-04 Water quality - Sampling - Part 1: Guidance on the design of sampling programmes and sampling techniques (ISO 5667-1:2006)
ISO/TS 17444-2:2017 Electronic fee collection — Charging performance — Part 2: Examination framework
BS ISO 19213:2017 Implants for surgery. Test methods of material for use as a cortical bone model
ISO 8243:2013 Cigarettes Sampling
I.S. EN 1170-8:2008 TEST METHOD FOR GLASS-FIBRE REINFORCED CEMENT - PART 8: CYCLIC WEATHERING TYPE TEST
ISO 14820-1:2016 Fertilizers and liming materials Sampling and sample preparation Part 1: Sampling
I.S. ENV 1006:2003 ADVANCED TECHNICAL CERAMICS - MONOLITHIC CERAMICS - GUIDANCE ON THE SELECTION OF TEST PIECES FOR THE EVALUATION OF PROPERTIES
ISO 11554:2017 Optics and photonics — Lasers and laser-related equipment — Test methods for laser beam power, energy and temporal characteristics
NF ISO 4603 : 1996 AMD 1 2011 TEXTILE GLASS - WOVEN FABRICS - DETERMINATION OF THICKNESS
UNE-EN 12467:2013 Fibre-cement flat sheets - Product specification and test methods
14/30301874 DC : 0 BS EN 16770 - SAFETY OF WOODWORKING MACHINES - CHIP AND DUST EXTRACTION SYSTEMS FOR INDOOR INSTALLATION - SAFETY REQUIREMENTS
S.R. ISO/TR 10017:2003 GUIDANCE ON STATISTICAL TECHNIQUES FOR ISO 9001:2000
PREN 12705 : DRAFT 2010 ADHESIVES FOR LEATHER AND FOOTWEAR MATERIALS - DETERMINATION OF COLOUR CHANGE OF WHITE OR BRIGHT COLOURED LEATHER SURFACES BY MIGRATION
ISO 29042-8:2011 Safety of machinery Evaluation of the emission of airborne hazardous substances Part 8: Room method for the measurement of the pollutant concentration parameter
ISO 10904:2011 Fibre-cement corrugated sheets and fittings for roofing and cladding
EN 492:2012+A2:2018 Fibre-cement slates and fittings - Product specification and test methods
ISO 9125:2009 Fibre-cement slates and fittings Product specification and test methods
CEN ISO/TS 17444-2:2017 Electronic fee collection - Charging performance - Part 2: Examination framework (ISO/TS 17444-2:2017)
ISO 9384:1991 Fibre-cement siding shingles
ISO 8573-5:2001 Compressed air — Part 5: Test methods for oil vapour and organic solvent content
EN ISO 180:2000/A2:2013 PLASTICS - DETERMINATION OF IZOD IMPACT STRENGTH (ISO 180:2000/AMD 2:2013)
DIN EN ISO 14125:2011-05 Fibre-reinforced plastic composites - Determination of flexural properties (ISO 14125:1998 + Cor 1:2001 + Amd 1:2011)
DIN EN ISO 14130:1998-02 FIBRE REINFORCED PLASTIC COMPOSITES - DETERMINATION OF APPARENT INTERLAMINAR SHEAR STRENGTH BY SHORT-BEAM METHOD
DIN EN 1093-9:2008-11 SAFETY OF MACHINERY - EVALUATION OF THE EMISSION OF AIRBORNE HAZARDOUS SUBSTANCES - PART 9: POLLUTANT CONCENTRATION PARAMETER, ROOM METHOD
DIN EN ISO 604 E : 2003 PLASTICS - DETERMINATION OF COMPRESSIVE PROPERTIES
BS EN ISO 1973:1996 Textile fibres. Determination of linear density. Gravimetric method and vibroscope method
BS EN ISO 14126:1999 Fibre-reinforced plastic composites. Determination of compressive properties in the in-plane direction
UNE-EN ISO 179-1:2011 Plastics - Determination of Charpy impact properties - Part 1: Non-instrumented impact test (ISO 179-1:2010)
BS EN 13782:2015 Temporary structure. Tents. Safety
UNE-EN 494:2013 Fibre-cement profiled sheets and fittings - Product specification and test methods
ONORM EN ISO 180 : 2013 PLASTICS - DETERMINATION OF IZOD IMPACT STRENGTH (ISO 180:2000 + AMD. 1:2006 + AMD. 2:2013)
DIN EN ISO 604:2003-12 PLASTICS - DETERMINATION OF COMPRESSIVE PROPERTIES
ISO 15012-4:2016 Health and safety in welding and allied processes Equipment for capture and separation of welding fume Part 4: General requirements
ISO 179:1993 Plastics Determination of Charpy impact strength
BS EN 12763:2000 Fibre-cement pipes and fittings for discharge systems for buildings. Dimensions and technical terms of delivery
BS EN 13923:2005 Filament-wound FRP pressure vessels. Materials, design, manufacturing and testing
BS EN ISO 5667-1:2006 Water quality. Sampling Guidance on the design of sampling programmes and sampling techniques
BS EN 12779:2015 Safety of woodworking machines. Chip and dust extraction systems with fixed installation. Safety requirements
ISO 14129:1997 Fibre-reinforced plastic composites — Determination of the in-plane shear stress/shear strain response, including the in-plane shear modulus and strength, by the plus or minus 45 degree tension test method
UNE-EN ISO 15012-1:2013 Health and safety in welding and allied processes - Equipment for capture and separation of welding fume - Part 1: Requirements for testing and marking of separation efficiency (ISO 15012-1:2013)
BS EN ISO 15012-1:2013 Health and safety in welding and allied processes. Equipment for capture and separation of welding fume Requirements for testing and marking of separation efficiency
BS EN 20140-2:1993 Determination, verification and application of precision data
UNE-EN 13782:2016 Temporary structure - Tents - Safety
BS EN 12705:2011 Adhesives for leather and footwear materials. Determination of colour change of white or bright coloured leather surfaces by migration
ISO 6259-1:2015 Thermoplastics pipes Determination of tensile properties Part 1: General test method
ISO 15012-2:2008 Health and safety in welding and allied processes Requirements, testing and marking of equipment for air filtration Part 2: Determination of the minimum air volume flow rate of captor hoods and nozzles
ISO 4674-1:2016 Rubber- or plastics-coated fabrics Determination of tear resistance Part 1: Constant rate of tear methods
ISO 6603-2:2000 Plastics — Determination of puncture impact behaviour of rigid plastics — Part 2: Instrumented impact testing
ISO 14130:1997 Fibre-reinforced plastic composites — Determination of apparent interlaminar shear strength by short-beam method
BS EN ISO 6259-1:2015 Thermoplastics pipes. Determination of tensile properties General test method
UNE EN 15383 : 0 PLASTICS PIPING SYSTEMS FOR DRAINAGE AND SEWERAGE - GLASS-REINFORCED THERMOSETTING PLASTICS (GRP) BASED ON POLYESTER RESIN (UP) - MANHOLES AND INSPECTION CHAMBERS
UNE-EN ISO 14125:1999 FIBRE-REINFORCED PLASTICS COMPOSITES. DETERMINATION OF FLEXURAL PROPERTIES (ISO 14125:1998)
ISO 8256:2004 Plastics — Determination of tensile-impact strength
ISO 180:2000 Plastics Determination of Izod impact strength
ISO 5079:1995 Textile fibres Determination of breaking force and elongation at break of individual fibres
BS EN ISO 179-1:2010 Plastics. Determination of Charpy impact properties Non-instrumented impact test
BS EN 1093-9 : 1999 SAFETY OF MACHINERY - EVALUATION OF THE EMISSION OF AIRBORNE HAZARDOUS SUBSTANCES - PART 9: POLLUTANT CONCENTRATION PARAMETER, ROOM METHOD
ISO 14126:1999 Fibre-reinforced plastic composites — Determination of compressive properties in the in-plane direction
BS EN ISO 10456:2007 Building materials and products. Hygrothermal properties. Tabulated design values and procedures for determining declared and design thermal values
BS EN 1482-1:2007 Fertilizers and liming materials. Sampling and sample preparation Sampling
DIN EN 843-5:2007-03 Advanced technical ceramics - Mechanical properties of monolithic ceramics at room temperature - Part 5: Statistical analysis
EN 1482-1:2007 Fertilizers and liming materials - Sampling and sample preparation - Part 1: Sampling
EN ISO 15310:2005 Fibre-reinforced plastic composites - Determination of the in-plane shear modulus by the plate twist method (ISO 15310:1999)
EN ISO 14130 : 1997 FIBRE-REINFORCED PLASTIC COMPOSITES - DETERMINATION OF APPARENT INTERLAMINAR SHEAR STRENGTH BY SHORT-BEAM METHOD
EN ISO 14126:1999/AC:2002 FIBRE-REINFORCED PLASTIC COMPOSITES - DETERMINATION OF COMPRESSIVE PROPERTIES IN THE IN-PLANE DIRECTION
EN ISO 179-1:2010 Plastics - Determination of Charpy impact properties - Part 1: Non-instrumented impact test (ISO 179-1:2010)
EN 15383:2012+A1:2013 Plastics piping systems for drainage and sewerage - Glass-reinforced thermosetting plastics (GRP) based on polyester resin (UP) - Manholes and inspection chambers
EN ISO 11554:2017 Optics and photonics - Lasers and laser-related equipment - Test methods for laser beam power, energy and temporal characteristics (ISO 11554:2017)
EN 13782:2015 Temporary structure - Tents - Safety
EN ISO 4674-1:2016 Rubber- or plastics-coated fabrics - Determination of tear resistance - Part 1: Constant rate of tear methods (ISO 4674-1:2016)
EN ISO 604 : 2003 PLASTICS - DETERMINATION OF COMPRESSIVE PROPERTIES (ISO 604:2002)
EN ISO 6603-2:2000 Plastics - Determination of puncture impact behaviour of rigid plastics - Part 2: Instrumented puncture test (ISO 6603-2:2000)
EN ISO 8256:2004 Plastics - Determination of tensile-impact strength (ISO 8256:2004)
EN 1392:2006 Adhesives for leather and footwear materials-Solvent-based and dispersion adhesives-Testing of bond strength under specified conditions
EN 843-5:2006 Advanced technical ceramics - Mechanical properties of monolithic ceramics at room temperature - Part 5: Statistical analysis
EN 326-2:2010+A1:2014 Wood-based panels - Sampling, cutting and inspection - Part 2: Initial type testing and factory production control
EN ISO 6259-1:2015 Thermoplastics pipes - Determination of tensile properties - Part 1: General test method (ISO 6259-1:2015)
EN 13923:2005 Filament-wound FRP pressure vessels - Materials, design, manufacturing and testing
EN ISO 527-1:2012 Plastics - Determination of tensile properties - Part 1: General principles (ISO 527-1:2012)
ENV 843-5 : 1996 ADVANCED TECHNICAL CERAMICS - MONOLITHIC CERAMICS - MECHANICAL TESTS AT ROOM TEMPERATURE - STATISTICAL ANALYSIS
EN 494:2012+A1:2015 Fibre-cement profiled sheets and fittings - Product specification and test methods
EN 1482:1996/AC:1996 SAMPLING OF SOLID FERTILIZERS AND LIMING MATERIALS
EN ISO 15012-2:2008 Health and safety in welding and allied processes - Requirements, testing and marking of equipment for air filtration - Part 2: Determination of the minimum air volume flow rate of captor hoods and nozzles (ISO 15012-2:2008)
EN ISO 14129 : 1997 FIBRE-REINFORCED PLASTIC COMPOSITES - DETERMINATION OF THE IN-PLANE SHEAR STRESS/SHEAR STRAIN RESPONSE, INCLUDING THE IN-PLANE SHEAR MODULUS AND STRENGTH, BY THE +/- 45 DEGREES TENSION TEST METHOD (ISO 14129:1997)
EN ISO 15012-1:2013 Health and safety in welding and allied processes - Equipment for capture and separation of welding fume - Part 1: Requirements for testing and marking of separation efficiency (ISO 15012-1:2013)
UNI EN ISO 5667-1 : 2007 WATER QUALITY - SAMPLING - PART 1: GUIDANCE ON THE DESIGN OF SAMPLING PROGRAMMES AND SAMPLING TECHNIQUES
EN ISO 5667-1 : 2006 COR 2007 WATER QUALITY - SAMPLING - PART 1: GUIDANCE ON THE DESIGN OF SAMPLING PROGRAMMES AND SAMPLING TECHNIQUES
NF EN ISO 178 : 2011 AMD 1 2013 PLASTICS - DETERMINATION OF FLEXURAL PROPERTIES
UNI EN ISO 15012-2 : 2008 HEALTH AND SAFETY IN WELDING AND ALLIED PROCESSES - REQUIREMENTS, TESTING AND MARKING OF EQUIPMENT FOR AIR FILTRATION - PART 2: DETERMINATION OF THE MINIMUM AIR VOLUME FLOW RATE OF CAPTOR HOODS AND NOZZLES
I.S. EN 1013-3:1998 LIGHT TRANSMITTING PROFILED PLASTIC SHEETING FOR SINGLE SKIN ROOFING - PART 3: SPECIFIC REQUIREMENTS AND TEST METHODS FOR SHEETS OF POLYVINYL CHLORIDE (PVC)
I.S. EN 492:2012 Fibre-cement slates and fittings - Product specification and test methods
ISO 19003:2006 Rubber and rubber products — Guidance on the application of statistics to physical testing
DIN EN ISO 15012-2:2008-06 HEALTH AND SAFETY IN WELDING AND ALLIED PROCESSES - REQUIREMENTS, TESTING AND MARKING OF EQUIPMENT FOR AIR FILTRATION - PART 2: DETERMINATION OF THE MINIMUM AIR VOLUME FLOW RATE OF CAPTOR HOODS AND NOZZLES
15/30302738 DC : 0 BS ISO 19213 - IMPLANTS FOR SURGERY - TEST METHODS OF MATERIAL FOR USE AS A CORTICAL BONE MODEL
DIN EN 1170-8 :2009-05 TEST METHOD FOR GLASS-FIBRE REINFORCED CEMENT - PART 8: CYCLIC WEATHERING TYPE TEST
BS ISO 8573-3:1999 Compressed air Test methods for measurement of humidity
BS ISO 12500-2:2007 Filters for compressed air. Test methods Oil vapours
13/30274532 DC : 0 BS EN ISO 6259-1 - THERMOPLASTICS PIPES - DETERMINATION OF TENSILE PROPERTIES - PART 1: GENERAL TEST METHOD
05/30085837 DC : DRAFT JUN 2005 EN ISO 5667-1 - WATER QUALITY - SAMPLING - PART 1: GUIDANCE ON THE DESIGN OF SAMPLING PROGRAMMES AND SAMPLING TECHNIQUES
15/30318694 DC : 0 BS ISO 12828-2 - VALIDATION METHODS FOR FIRE GAS ANALYSES - PART 2: VALIDATION OF QUANTIFICATION METHOD
BIS IS 13360-5-8 : 2013 PLASTICS - METHODS OF TESTING - PART 5: MECHANICAL PROPERTIES - SECTION 8: DETERMINATION OF COMPRESSIVE PROPERTIES
DIN EN 16480:2014-06 (Draft) PUMPS - MINIMUM REQUIRED EFFICIENCY OF ROTODYNAMIC WATER PUMPS
BS ISO 12500-1:2007 Filters for compressed air. Test methods Oil aerosols
07/30169285 DC : 0 BS ISO 8336 - FIBRE-CEMENT FLAT SHEETS - PRODUCT SPECIFICATION AND TEST METHODS
DIN ISO 8243:2015-12 CIGARETTES - SAMPLING (ISO 8243:2013)
UNE-ISO 4582:2014 Plastics. Determination of changes in colour and variations in properties after exposure to daylight under glass, natural weathering or laboratory light sources
BS ISO 8573-4:2001 Compressed air Test methods for solid particle content
BS ISO 4582:2017 Plastics. Determination of changes in colour and variations in properties after exposure to glass-filtered solar radiation, natural weathering or laboratory radiation sources
CSA ISO/TR 10017:2003 GUIDANCE ON STATISTICAL TECHNIQUES FOR ISO 9001:2000
03/102177 DC : DRAFT OCT 2003 BS ISO 16269-6 - STATISTICAL INTERPRETATION OF DATA - PART 6: DETERMINATION OF A STATISTICAL TOLERANCE INTERVAL
BS ISO 7772-1:1998 Assessment of industrial laundry machinery by its effect on textiles Washing machines
BS ISO 2230:2002 Rubber products. Guidelines for storage
ASTM D 5942 : 1996 Test Method for Determination of Charpy Impact Strength (Withdrawn 1998)
ISO 8573-4:2001 Compressed air Part 4: Test methods for solid particle content
PREN 494 : DRAFT 2010 FIBRE-CEMENT PROFILED SHEETS AND FITTINGS - PRODUCT SPECIFICATION AND TEST METHODS
S.R. CEN ISO/TS 17444-2:2017 ELECTRONIC FEE COLLECTION - CHARGING PERFORMANCE - PART 2: EXAMINATION FRAMEWORK (ISO/TS 17444-2:2017)
ASTM D 5943 : 1996 Test Method for Determination of Flexural Properties (Withdrawn 1998)
I.S. EN ISO 15012-4:2016 HEALTH AND SAFETY IN WELDING AND ALLIED PROCESSES - EQUIPMENT FOR CAPTURE AND SEPARATION OF WELDING FUME - PART 4: GENERAL REQUIREMENTS (ISO 15012-4:2016)
ISO 5308:1992 Solid fertilizers Method of checking the performance of mechanical devices for sampling of product moving in bulk
ISO 604:2002 Plastics — Determination of compressive properties
ISO 19085-3:2017 Woodworking machines Safety requirements Part 3: Numerically controlled (NC) boring and routing machines
PREN 17129 : DRAFT 2017 CONTINUOUS-FIBRE-REINFORCED PLASTIC COMPOSITES - PULTRUDED UNIDIRECTIONAL RODS - DETERMINATION OF TENSILE PROPERTIES IN PARALLEL TO THE FIBRE DIRECTION
ONORM EN ISO 178 : 2013 PLASTICS - DETERMINATION OF FLEXURAL PROPERTIES (ISO 178:2010 + AMD 1:2013)
ISO 8573-6:2003 Compressed air — Part 6: Test methods for gaseous contaminant content
ISO/TR 10017:2003 Guidance on statistical techniques for ISO 9001:2000
DIN EN 326-2 E : 2000 WOOD-BASED PANELS - SAMPLING, CUTTING AND INSPECTION - PART 2: INITIAL TYPE TESTING AND FACTORY PRODUCTION CONTROL
DIN EN ISO 179-1:2010-11 Plastics - Determination of Charpy impact properties - Part 1: Non-instrumented impact test (ISO 179-1:2010)
UNE-EN ISO 4674-1:2017 Rubber- or plastics-coated fabrics - Determination of tear resistance - Part 1: Constant rate of tear methods (ISO 4674-1:2016)
BS EN ISO 14130:1998 Fibre-reinforced plastic composites. Determination of apparent interlaminar shear strength by short-beam method
UNE-EN 12779:2016 Safety of woodworking machines - Chip and dust extraction systems with fixed installation - Safety requirements
ISO 5667-1:2006 Water quality Sampling Part 1: Guidance on the design of sampling programmes and sampling techniques
BS EN 1013-3:1998 Light transmitting profiled plastic sheeting for single skin roofing Specific requirements and test methods for sheets of polyvinyl chloride (PVC)
BS EN ISO 15310:2005 Reinforced plastics. Determination of the in-plane shear modulus by the plate twist method
ISO 15012-1:2013 Health and safety in welding and allied processes Equipment for capture and separation of welding fume Part 1: Requirements for testing and marking of separation efficiency
BS EN ISO 527-1:2012 Plastics. Determination of tensile properties General principles
ISO 179-1:2010 Plastics — Determination of Charpy impact properties — Part 1: Non-instrumented impact test
DIN EN ISO 4674-1:2017-03 RUBBER- OR PLASTICS-COATED FABRICS - DETERMINATION OF TEAR RESISTANCE - PART 1: CONSTANT RATE OF TEAR METHODS (ISO 4674-1:2016)
DIN EN ISO 527-1:2012-06 PLASTICS - DETERMINATION OF TENSILE PROPERTIES - PART 1: GENERAL PRINCIPLES (ISO 527-1:2012)
DIN EN 326-2:2000-10 WOOD-BASED PANELS - SAMPLING, CUTTING AND INSPECTION - PART 2: INITIAL TYPE TESTING AND FACTORY PRODUCTION CONTROL
DIN EN 1482-1:2007-04 Fertilizers and liming materials - Sampling and sample preparation - Part 1: Sampling
EN 1244:1998 Adhesives - Determination of the colour and/or colour changes of adhesive coats under the influence of light
DIN EN ISO 15310:2005-10 Fibre-reinforced plastic composites - Determination of the in-plane shear modulus by the plate twist method (ISO 15310:1999)
EN 60335-2-69:2012 Household and similar electrical appliances - Safety - Part 2-69: Particular requirements for wet and dry vacuum cleaners, including power brush for commercial use
BS 2782-3.359(1993) : 1993 AMD 8643 METHODS OF TESTING PLASTICS - MECHANICAL PROPERTIES - DETERMINATION OF CHARPY IMPACT STRENGTH
BS 2782-3.345A(1993) : 1993 AMD 8637 METHODS OF TESTING PLASTICS - MECHANICAL PROPERTIES - DETERMINATION OF COMPRESSIVE PROPERTIES
NF EN ISO 8256 : 2005 PLASTICS - DETERMINATION OF TENSILE-IMPACT STRENGTH
BS 2750-2(1993) : 1993 ACOUSTICS - MEASUREMENT OF SOUND INSULATION IN BUILDINGS AND OF BUILDING ELEMENTS - DETERMINATION, VERIFICATION AND APPLICATION OF PRECISION DATA
BS 2782-3.350(1993) : 1993 AMD 8641 METHODS OF TESTING PLASTICS - MECHANICAL PROPERTIES - DETERMINATION OF IZOD IMPACT STRENGTH

ISO 3534:1977 Statistics — Vocabulary and symbols
ISO 2854:1976 Statistical interpretation of data — Techniques of estimation and tests relating to means and variances

View more information
$79.15
Including GST where applicable

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.

Need help?
Call us on 131 242, then click here to start a Screen Sharing session
so we can help right away! Learn more