Customer Support: 131 242

  • There are no items in your cart
We noticed you’re not on the correct regional site. Switch to our AMERICAS site for the best experience.
Dismiss alert

ISO 291:2008

Current

Current

The latest, up-to-date edition.

Plastics Standard atmospheres for conditioning and testing

Available format(s)

Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users

Language(s)

English, French, Russian

Published date

22-04-2008

ISO 291:2008 sets out specifications relating to the conditioning and testing of all plastics and all types of test specimen at constant atmospheric conditions.

Special atmospheres applicable to a particular test or material or simulating a particular climatic environment are not included in this International Standard.

DevelopmentNote
Supersedes ISO/DIS 291. (04/2008)
DocumentType
Standard
Pages
8
PublisherName
International Organization for Standardization
Status
Current
Supersedes

08/30180284 DC : DRAFT JUNE 2008 BS EN 1465 - ADHESIVES - DETERMINATION OF TENSILE LAP-SHEAR STRENGTH OF BONDED ASSEMBLIES
I.S. EN 13121-3:2016 GRP TANKS AND VESSELS FOR USE ABOVE GROUND - PART 3: DESIGN AND WORKMANSHIP
DIN EN ISO 22007-6 E : 2015 PLASTICS - DETERMINATION OF THERMAL CONDUCTIVITY AND THERMAL DIFFUSIVITY - PART 6: COMPARATIVE METHOD FOR LOW THERMAL CONDUCTIVITIES USING A TEMPERATURE-MODULATION TECHNIQUE (ISO 22007-6:2014)
NF EN 62631-1 : 2011 DIELECTRIC AND RESISTIVE PROPERTIES OF SOLID INSULATING MATERIALS - PART 1: GENERAL
DIN EN ISO 21509 E : 2015 PLASTICS AND EBONITE - VERIFICATION OF SHORE DUROMETERS (ISO 21509:2006)
I.S. EN ISO 10350-1:2017 PLASTICS - ACQUISITION AND PRESENTATION OF COMPARABLE SINGLE-POINT DATA - PART 1: MOULDING MATERIALS (ISO 10350-1:2017)
BS 2782-3 Method 365B:1981 Methods of testing plastics. Mechanical properties Determination of indentation hardness by means of a durometer (Shore hardness)
DIN EN ISO 489 E : 1999 PLASTICS - DETERMINATION OF REFRACTIVE INDEX
BS ISO 15040:1999 Composites. Prepregs. Determination of gel time
BS EN ISO 16396-2:2017 Plastics. Polyamide (PA) moulding and extrusion materials Preparation of test specimens and determination of properties
UNE-EN 60695-11-5:2017 Fire hazard testing - Part 11-5: Test flames - Needle-flame test method - Apparatus, confirmatory test arrangement and guidance
ISO 11963:2012 Plastics Polycarbonate sheets Types, dimensions and characteristics
BS EN 62788-1-4:2016 Measurement procedures for materials used in photovoltaic modules Encapsulants. Measurement of optical transmittance and calculation of the solar-weighted photon transmittance, yellowness index, and UV cut-off wavelength
BS ISO 15850:2014 Plastics. Determination of tension-tension fatigue crack propagation. Linear elastic fracture mechanics (LEFM) approach
11/30239977 DC : 0 BS EN 16245-2 - FIBRE-REINFORCED PLASTIC COMPOSITES - DECLARATION OF RAW MATERIAL CHARACTERISTICS - PART 2: ADDITIONAL REQUIREMENTS FOR RESINS, CURING SYSTEMS, ADDITIVES AND MODIFIERS
BS ISO 25217:2009 Adhesives. Determination of the mode 1 adhesive fracture energy of structural adhesive joints using double cantilever beam and tapered double cantilever beam specimens
94/304105 DC : DRAFT MAR 1994 PREN 1400 - CHILD CARE ARTICLES - SOOTHERS FOR BABIES AND YOUNG CHILDREN - SAFETY REQUIREMENTS AND TEST METHODS
13/30255888 DC : 0 BS ISO 5660-1 - REACTION-TO-FIRE TESTS - HEAT RELEASE, SMOKE PRODUCTION AND MASS LOSS RATE - PART 1: HEAT RELEASE RATE (CONE CALORIMETER METHOD) AND SMOKE PRODUCTION RATE (DYNAMIC MEASUREMENT)
DIN EN ISO 178 E : 2013 PLASTICS - DETERMINATION OF FLEXURAL PROPERTIES (ISO 178:2010 + AMD.1:2013)
UNE-EN ISO 9988-2:2015 Plastics - Polyoxymethylene (POM) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 9988-2:2006)
PREN ISO 7792-2 : DRAFT 2011 PLASTICS - THERMOPLASTIC POLYESTER (TP) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
I.S. EN 16245-5:2013 FIBRE-REINFORCED PLASTIC COMPOSITES - DECLARATION OF RAW MATERIAL CHARACTERISTICS - PART 5: SPECIFIC REQUIREMENTS FOR CORE MATERIALS
I.S. EN ISO 877:1997
I.S. EN ISO 7792-2:2012 PLASTICS - THERMOPLASTIC POLYESTER (TP) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES (ISO 7792-2:2012)
PREN 438-2 : DRAFT 2014 HIGH-PRESSURE DECORATIVE LAMINATES (HPL) - SHEETS BASED ON THERMOSETTING RESINS (USUALLY CALLED LAMINATES) - PART 2: DETERMINATION OF PROPERTIES
AFAP-2 : 2010 NATO REACTION-TO-FIRE TESTS FOR MATERIALS - SMOKE GENERATION
UNI EN ISO 15015 : 2011 PLASTICS - EXTRUDED SHEETS OF IMPACT-MODIFIED ACRYLONITRILE-STYRENE COPOLYMERS (ABS, AEPDS AND ASA) - REQUIREMENTS AND TEST METHODS
ISO 23560:2015 Woven polypropylene sacks for bulk packaging of foodstuffs
PREN 14869-1 : DRAFT 2010 STRUCTURAL ADHESIVES - DETERMINATION OF SHEAR BEHAVIOUR OF STRUCTURAL BONDS - PART 1: TORSION TEST METHOD USING BUTT-BONDED HOLLOW CYLINDERS
DIN ISO 16486-5 E : 2015 PLASTICS PIPING SYSTEMS FOR THE SUPPLY OF GASEOUS FUELS - UNPLASTICIZED POLYAMIDE (PA-U) PIPING SYSTEMS WITH FUSION JOINTING AND MECHANICAL JOINTING - PART 5: FITNESS FOR PURPOSE OF THE SYSTEM (ISO 16486-5:2012)
ISO 19821:2017 Determination of span rating for natural fibre-reinforced plastic composite (NFC) deck boards
BS ISO 17467-1:2012 Plastics piping systems for the supply of gaseous fuels. Unplasticized polyamide (PA-U) piping systems jointed by solvent cement General
BS 2782-1 Method 140B:1993 Methods of testing plastics. Thermal properties Determination of the burning behaviour of flexible vertical specimens in contact with a small-flame ignition source
I.S. EN 1400-2:2002 CHILD USE AND CARE ARTICLES - SOOTHERS FOR BABIES AND YOUNG CHILDREN - PART 2: MECHANICAL REQUIREMENTS AND TESTS
06/30144978 DC : DRAFT JAN 2006 EN ISO 15014 - PLASTICS - EXTRUDED SHEETS OF POLY(VINYLIDENE FLUORIDE) (PVDF) - REQUIREMENTS AND TEST METHODS
BS ISO 2113:1996 Reinforcement fibres. Woven fabrics. Basis for a specification
BS ISO 18946:2011 Imaging materials. Reflection colour photographic prints. Method for testing humidity fastness
BS ISO 25179:2010 Adhesives. Determination of the solubility of water-soluble or alkali-soluble pressure-sensitive adhesives
10/30211370 DC : DRAFT JUNE 2010 BS ISO 11833-1 - PLASTICS - UNPLASTICIZED POLY(VINYL CHLORIDE) SHEETS - TYPES, DIMENSIONS AND CHARACTERISTICS - PART 1: SHEETS OF THICKNESS NOT LESS THAN 1 MM
DIN EN ISO 29664 E : 2017 PLASTICS - ARTIFICIAL WEATHERING INCLUDING ACIDIC DEPOSITION (ISO 29664:2010)
BS ISO 6402-2 : 94 AMD 10652
12/30257998 DC : 0 BS ISO 11357-2 - PLASTICS - DIFFERENTIAL SCANNING CALORIMETRY (DSC) - PART 2: DETERMINATION OF GLASS TRANSITION TEMPERATURE AND GLASS TRANSITION STEP HEIGHT
BS EN ISO 1135-5:2015 Transfusion equipment for medical use Transfusion sets for single use with pressure infusion apparatus
16/30334902 DC : 0 BS EN ISO 10350-1 - PLASTICS - ACQUISITION AND PRESENTATION OF COMPARABLE SINGLE-POINT DATA - PART 1: MOULDING MATERIALS
DIN ISO 175:1989-04 PLASTICS - DETERMINATION OF THE EFFECTS OF LIQUID CHEMICALS, INCLUDING WATER
BS ISO 16525-7:2014 Adhesives. Test methods for isotropic electrically conductive adhesives Environmental test methods
BS ISO 19699-1:2017 Superabsorbent polymer. Sodium polyacrylate resin for absorbing blood Test methods
BS ISO 18941:2017 Imaging materials. Colour reflection prints. Test method for ozone gas fading stability
I.S. EN ISO 11358:1997 PLASTICS - THERMOGRAVIMETRY (TG) OF POLYMERS - GENERAL PRINCIPLES
BS ISO 11528:2016 Buildings and civil engineering works. Sealants. Determination of crazing and cracking following exposure to artificial or natural weathering
BS EN 60695-2-13 : 2010 FIRE HAZARD TESTING - PART 2-13: GLOWING/HOT-WIRE BASED TEST METHODS - GLOW-WIRE IGNITION TEMPERATURE (GWIT) TEST METHOD FOR MATERIALS
DIN EN ISO 8510-2:2010-12 Adhesives - Peel test for a flexible-bonded-to-rigid test specimen assembly - Part 2: 180 degree peel (ISO 8510-2:2006)
07/30169692 DC : 0 BS EN 60695-2-12 - FIRE HAZARD TESTING - PART 2-12: GLOWING/HOT-WIRE BASED TEST METHODS - GLOW-WIRE FLAMMABILITY INDEX (GWFI) TEST METHOD FOR MATERIALS
DIN EN 16245-3:2013-08 FIBRE-REINFORCED PLASTIC COMPOSITES - DECLARATION OF RAW MATERIAL CHARACTERISTICS - PART 3: SPECIFIC REQUIREMENTS FOR FIBRE
BS 2782-5 Method 552A:1981 Methods of testing plastics. Optical and colour properties, weathering Determination of changes in colour and variations in properties after exposure to daylight under glass, natural weathering or artificial light
BS ISO 1926:2009 Rigid cellular plastics. Determination of tensile properties
ISO 18263-2:2015 Plastics Mixtures of polypropylene (PP) and polyethylene (PE) recyclate derived from PP and PE used for flexible and rigid consumer packaging Part 2: Preparation of test specimens and determination of properties
DIN EN 15870 E : 2009 ADHESIVES - DETERMINATION OF TENSILE STRENGTH OF BUTT JOINTS
16/30340793 DC : 0 BS ISO 17281 - PLASTICS - DETERMINATION OF FRACTURE TOUGHNESS (GIC AND KIC) AT MODERATELY HIGH LOADING RATES (1 M/S)
CSA C22.2 No. 0.17 : 2000 : R2004 EVALUATION OF PROPERTIES OF POLYMERIC MATERIALS
BS EN 17098-2:2018 Plastics. Barrier films for agricultural and horticultural soil disinfection by fumigation Method for film permeability determination using a static technique
I.S. EN ISO 1135-5:2015 TRANSFUSION EQUIPMENT FOR MEDICAL USE - PART 5: TRANSFUSION SETS FOR SINGLE USE WITH PRESSURE INFUSION APPARATUS (ISO 1135-5:2015)
BS 2782-1.135(1993) : 1993 AMD 10349 METHODS OF TEST PLASTICS - THERMAL PROPERTIES - DETERMINATION OF THE TIME-TEMPERATURE LIMITS AFTER PROLONGED EXPOSURE TO HEAT
PD CEN/TR 14548:2003 Adhesives. Guide to test methods and other standards for the general requirements, characterization and safety of structural adhesives
BS EN 16245-3:2013 Fibre-reinforced plastic composites. Declaration of raw material characteristics Specific requirements for fibre
DIN EN 15865 E : 2009 ADHESIVES - DETERMINATION OF TORQUE STRENGTH OF ANAEROBIC ADHESIVES ON THREADED FASTENERS
13/30275837 DC : 0 BS ISO 18944 - IMAGING MATERIALS - REFLECTION COLOUR PHOTOGRAPHIC PRINTS - TEST PRINT CONSTRUCTION AND MEASUREMENT
I.S. EN ISO 21509:2015 PLASTICS AND EBONITE - VERIFICATION OF SHORE DUROMETERS (ISO 21509:2006)
DIN EN ISO 21509:2015-10 PLASTICS AND EBONITE - VERIFICATION OF SHORE DUROMETERS (ISO 21509:2006)
02/564514 DC : DRAFT OCT 2002 BS EN ISO 8536-4 - INFUSION EQUIPMENT FOR MEDICAL USE - PART 4: INFUSION SETS FOR SINGLE USE, GRAVITY FEED
IEC 62899-201:2016 Printed electronics - Part 201: Materials - Substrates
12/30238122 DC : 0 BS EN ISO 75-1 - PLASTICS - DETERMINATION OF TEMPERATURE OF DEFLECTION UNDER LOAD - PART 1: GENERAL TEST METHOD (ISO/DIS 75-1:2012)
10/30231826 DC : 0 BS EN 14869-2 - STRUCTURAL ADHESIVES - DETERMINATION OF SHEAR BEHAVIOUR OF STRUCTURAL BONDS - PART 2: THICK ADHERENDS SHEAR TEST
BS 903-C2:1982 Physical testing of rubber Determination of volume resistivity
DIN EN 15466-2:2009-10 Primers for cold and hot applied joint sealants - Part 2: Determination of resistance against alkali; German version EN 15466-2:2009
PD ISO/TR 18930:2001 Imaging materials. Protocols for outdoor weathering experiments
BS EN ISO 30013:2011 Rubber and plastics hoses. Methods of exposure to laboratory light sources. Determination of changes in colour, appearance and other physical properties
DIN ISO 8296:2008-03 Plastics - Film and sheeting - Determination of wetting tension (ISO 8296:2003)
08/30170332 DC : DRAFT JAN 2008 BS EN ISO 8986-2 - PLASTICS - POLYBUTENE-1 (PB-1) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
BS ISO 11667 : 1997 AMD 10676 FIBRE REINFORCED PLASTICS - MOULDING COMPOUNDS AND PREPREGS - DETERMINATION OF RESIN, REINFORCEMENT-FIBRE AND MINERAL-FILLER CONTENT - DISSOLUTION METHODS
14/30294070 DC : 0 BS EN 59 - GLASS REINFORCED PLASTICS - MEASUREMENT OF HARDNESS BY MEANS OF A BARCOL IMPRESSOR
08/30188330 DC : DRAFT AUG 2008 BS EN ISO 178 - PLASTICS - DETERMINATION OF FLEXURAL PROPERTIES
11/30197617 DC : 0 BS ISO 11855-5 - BUILDING ENVIRONMENT DESIGN - STANDARDS FOR THE DESIGN, CONSTRUCTION AND OPERATION OF RADIANT HEATING AND COOLING SYSTEMS - PART 5: INSTALLATION
04/30122909 DC : DRAFT SEP 2004 ISO 19212 - ADHESIVES - DETERMINATION OF TEMPERATURE DEPENDENCE OF SHEAR STRENGTH
BS EN ISO 15527:2013 Plastics. Compression-moulded sheets of polyethylene (PEUHMW, PE-HD). Requirements and test methods
BS ISO 15106-4:2008 Plastics. Film and sheeting. Determination of water vapour transmission rate Gas-chromatographic detection sensor method
06/30159593 DC : 0 BS ISO/IEC 15457-3 - IDENTIFICATION CARDS - THIN FLEXIBLE CARDS - PART 3: TEST METHODS
BS ISO 13106:2014 Plastics. Blow-moulded polypropylene containers for packaging of liquid foodstuffs
ASTM G 74 : 2013 : REDLINE Standard Test Method for Ignition Sensitivity of Nonmetallic Materials and Components by Gaseous Fluid Impact
BS ISO 24335:2006 Laminate floor coverings. Determination of impact resistance
BS ISO 18352:2009 Carbon-fibre-reinforced plastics. Determination of compression-after-impact properties at a specified impact-energy level
BS ISO 8605:2001 Textile-glass-reinforced plastics. Sheet moulding compound (SMC). Basis for specification
CEI 89-38 : 2014 FIRE HAZARD TESTING - PART 11-11: TEST FLAMES - DETERMINATION OF THE CHARACTERISTIC HEAT FLUX FOR IGNITION FROM A NON-CONTACTING FLAME SOURCE
04/30078983 DC : DRAFT OCT 2004 ISO 22088-4 - PLASTICS - DETERMINATION OF RESISTANCE TO ENVIRONMENTAL STRESS CRACKING (ESC) - PART 4: BALL OR PIN IMPRESSION METHOD
05/30091855 DC : DRAFT MAR 2005 ISO 1874-2 - PLASTICS - POLYAMIDE (PA) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
DIN EN ISO 15015:2011-07 Plastics - Extruded sheets of impact-modified acrylonitrile-styrene copolymers (ABS, AEPDS and ASA) - Requirements and test methods (ISO 15015:2011)
DIN EN ISO 16012:2016-02 PLASTICS - DETERMINATION OF LINEAR DIMENSIONS OF TEST SPECIMENS (ISO 16012:2015)
04/30078976 DC : DRAFT OCT 2004 ISO 22088-3 - PLASTICS - DETERMINATION OF RESISTANCE TO ENVIRONMENTAL STRESS CRACKING (ESC) - PART 3: BENT STRIP METHOD
DIN EN 15860 E : 2012 PLASTICS - THERMOPLASTIC SEMI-FINISHED PRODUCTS FOR MACHINING - REQUIREMENTS AND TEST METHODS
BS ISO 17467-3:2012 Plastics piping systems for the supply of gaseous fuels. Unplasticized polyamide (PA-U) piping systems jointed by solvent cement Fittings
15/30315534 DC : 0 BS EN ISO 16396-2 - PLASTICS - POLYAMIDE (PA) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
BS ISO 4894-2 : AMD 10662 PLASTICS - STYRENE/ACRYLONITRILE (SAN) MOULDING AND EXTRUSION MATERIALS - PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
13/30264474 DC : 0 BS ISO 17541 - PLASTICS - QUANTITATIVE EVALUATION OF SCRATCH-INDUCED DAMAGE AND SCRATCH VISIBILITY
BS 2782-9 Method 930A:1977 Methods of testing plastics. Sampling and test specimen preparation Preparation of test specimens by machining
14/30292918 DC : 0 BS ISO 18489 - POLYETHYLENE (PE) MATERIALS - DETERMINATION OF RESISTANCE TO SLOW CRACK GROWTH UNDER CYCLIC LOADING - CRACKED ROUND BAR TEST METHOD
ISO 13636:2012 Plastics — Film and sheeting — Non-oriented poly(ethylene terephthalate) (PET) sheets
ISO 16525-6:2014 Adhesives Test methods for isotropic electrically conductive adhesives Part 6: Determination of pendulum-type shear impact
13/30258014 DC : 0 BS EN ISO 11358-1 - PLASTICS - THERMOGRAVIMETRY (TG) OF POLYMERS - PART 1: GENERAL PRINCIPLES (ISO/DIS 11358-1:2013)
04/30115317 DC : 0 BS EN ISO 10350-1 - PLASTICS - ACQUISITION AND PRESENTATION OF COMPARABLE SINGLE-POINT DATA - PART 1: MOULDING MATERIALS
BS ISO 13586 : 2000 PLASTICS - DETERMINATION OF FRACTURE TOUGHNESS (G[IC] AND K[IC]) - LINEAR ELASTIC FRACTURE MECHANICS (LEFM) APPROACH
DIN ISO 306:1990-09 PLASTICS - THERMOPLASTIC MATERIALS - DETERMINATION OF VICAT SOFTENING TEMPERATURE
13/30275218 DC : 0 BS ISO 19700 - CONTROLLED EQUIVALENCE RATIO METHOD FOR THE DETERMINATION OF HAZARDOUS COMPONENTS OF FIRE EFFLUENTS - THE STEADY STATE TUBE FURNACE
12/30237820 DC : 0 BS EN ISO 306 - PLASTICS - THERMOPLASTIC MATERIALS - DETERMINATION OF VICAT SOFTENING TEMPERATURE (VST) (ISO/DIS 306:2012)
17/30351754 DC : DRAFT SEP 2017 BS ISO 18944 - IMAGING MATERIALS - REFLECTION COLOUR PHOTOGRAPHIC PRINTS - TEST PRINT CONSTRUCTION AND MEASUREMENT
BS ISO 15987:2003 Plastics. Film and sheeting. Biaxially oriented polyamide (nylon) films
ISO 14127:2008 Carbon-fibre-reinforced composites Determination of the resin, fibre and void contents
UNE-EN ISO 877-1:2011 Plastics - Methods of exposure to solar radiation - Part 1: General guidance (ISO 877-1:2009)
UNI EN 15836-2 : 2010 PLASTICS - PLASTICIZED POLY(VINYL CHLORIDE) (PVC-P) MEMBRANES FOR INGROUND SWIMMING POOLS - PART 2: REINFORCED MEMBRANES OF NOMINAL THICKNESS EQUAL TO OR GREATER THAN 1,5 MM
BIS IS 13360-5-4 : 2013 PLASTICS - METHODS OF TESTING - PART 5: MECHANICAL PROPERTIES - SECTION 4: DETERMINATION OF IZOD IMPACT STRENGTH
BS EN 60216-1:2013 Electrical insulating materials. Thermal endurance properties Ageing procedures and evaluation of test results
12/30192217 DC BS ISO 12856. Plastic railway sleepers (railroad ties)
I.S. EN ISO 11357-2:2014 PLASTICS - DIFFERENTIAL SCANNING CALORIMETRY (DSC) - PART 2: DETERMINATION OF GLASS TRANSITION TEMPERATURE AND GLASS TRANSITION STEP HEIGHT (ISO 11357-2:2013)
BIS IS 13360-5-11 : 2013 PLASTICS - METHODS OF TESTING - PART 5: MECHANICAL PROPERTIES - SECTION 11: DETERMINATION OF INDENTATION HARDNESS OF PLASTICS BY MEANS OF DUROMETER (SHORE HARDNESS)
BS ISO 13468-2 : 1999 AMD 16335 PLASTICS - DETERMINATION OF THE TOTAL LUMINOUS TRANSMITTANCE OF TRANSPARENT MATERIALS - DOUBLE-BEAM INSTRUMENT
07/30152076 DC : 0 BS ISO 25137-2 - PLASTICS - SULFONE PLASTICS (SP) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
14/30302995 DC : 0 BS EN 16776 - RESILIENT FLOOR COVERINGS - HOMOGENEOUS AND HETEROGENEOUS POLYURETHANE FLOOR COVERINGS - SPECIFICATION
CEI EN 62788-1-4 : 1ED 2017 MEASUREMENT PROCEDURES FOR MATERIALS USED IN PHOTOVOLTAIC MODULES - PART 1-4: ENCAPSULANTS - MEASUREMENT OF OPTICAL TRANSMITTANCE AND CALCULATION OF THE SOLAR-WEIGHTED PHOTON TRANSMITTANCE, YELLOWNESS INDEX, AND UV CUT-OFF WAVELENGTH
UNE-EN ISO 21509:2016 Plastics and ebonite - Verification of Shore durometers (ISO 21509:2006)
BS ISO 16241:2005 Notch tensile test to measure the resistance to slow crack growth of polyethylene materials for pipe and fitting products (PENT)
BS ISO 15034:2000 Composites. Prepregs. Determination of resin flow
IEC 60695-11-5:2016 RLV Fire hazard testing - Part 11-5: Test flames - Needle-flame test method - Apparatus, confirmatory test arrangement and guidance
ISO 16525-7:2014 Adhesives Test methods for isotropic electrically conductive adhesives Part 7: Environmental test methods
UNI EN 16245-5 : 2013 FIBRE-REINFORCED PLASTIC COMPOSITES - DECLARATION OF RAW MATERIAL CHARACTERISTICS - PART 5: SPECIFIC REQUIREMENTS FOR CORE MATERIALS
09/30176542 DC : 0 BS EN ISO 30013 - RUBBER AND THERMOPLASTICS HOSES - METHODS OF EXPOSURE TO LABORATORY LIGHT SOURCES - DETERMINATION OF CHANGES IN COLOUR, APPEARANCE AND OTHER PHYSICAL PROPERTIES
ISO 3616:2001 Textile glass — Chopped-strand and continuous-filament mats — Determination of average thickness, thickness under load and recovery after compression
BS 5734-1:1979 Polyester moulding compounds for electrical and other purposes Methods of test
09/30179580 DC : 0 BS EN ISO 29664 - PLASTICS - ARTIFICIAL WEATHERING INCLUDING ACIDIC DEPOSITION
ISO 1926:2009 Rigid cellular plastics Determination of tensile properties
DIN EN ISO 25137-2 E : 2017 PLASTICS - SULFONE POLYMER MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES (ISO 25137-2:2009)
ISO 15439-2:2007 Plastics piping systems for the supply of gaseous fuels for maximum operating pressure up to and including 0,4 MPa (4 bar) Polyamide (PA) Part 2: Pipes
INCITS/ISO/IEC 15457-3 : 2002 IDENTIFICATION CARDS - THIN FLEXIBLE CARDS - PART 3: TEST METHODS
UNE-EN ISO 6721-1:2012 Plastics - Determination of dynamic mechanical properties - Part 1: General principles (ISO 6721-1:2011)
I.S. EN ISO 8510-2:2010 ADHESIVES - PEEL TEST FOR A FLEXIBLE-BONDED-TO-RIGID TEST SPECIMEN ASSEMBLY - PART 2: 180 DEGREE PEEL
ASTM D 4673 : 2016 : REDLINE Standard Classification System for and Basis for Specification for Acrylonitrile–Butadiene–Styrene (ABS) Plastics and Alloys Molding and Extrusion Materials
I.S. EN 455-4:2009 MEDICAL GLOVES FOR SINGLE USE - PART 4: REQUIREMENTS AND TESTING FOR SHELF LIFE DETERMINATION
ISO 1110:1995 Plastics Polyamides Accelerated conditioning of test specimens
I.S. EN 16245-4:2013 FIBRE-REINFORCED PLASTIC COMPOSITES - DECLARATION OF RAW MATERIAL CHARACTERISTICS - PART 4: SPECIFIC REQUIREMENTS FOR FABRICS
I.S. CR 14376:2002 ADHESIVES - ADHESIVES FOR PAPER AND BOARD, PACKAGING AND DISPOSABLE SANITARY PRODUCTS - DESCRIPTION AND ASSESSMENT OF THE SETTING PROCESS
I.S. EN 60695-11-20:2015 FIRE HAZARD TESTING - PART 11-20: TEST FLAMES - 500 W FLAME TEST METHODS
ISO 9352:2012 Plastics — Determination of resistance to wear by abrasive wheels
ISO/TS 19392-3:2018 Paints and varnishes Coating systems for wind-turbine rotor blades Part 3: Determination and evaluation of resistance to rain erosion using water jet
I.S. EN ISO 15527:2013 PLASTICS - COMPRESSION-MOULDED SHEETS OF POLYETHYLENE (PE-UHMW, PE-HD) - REQUIREMENTS AND TEST METHODS (ISO 15527:2010)
I.S. EN 60695-2-13:2010 FIRE HAZARD TESTING - PART 2-13: GLOWING/HOT-WIRE BASED TEST METHODS - GLOW-WIRE IGNITION TEMPERATURE (GWIT) TEST METHOD FOR MATERIALS
I.S. EN 15836-2:2010 PLASTICS - PLASTICIZED POLY(VINYL CHLORIDE) (PVC-P) MEMBRANES FOR INGROUND SWIMMING POOLS - PART 2: REINFORCED MEMBRANES OF NOMINAL THICKNESS EQUAL TO OR GREATER THAN 1,5 MM
BS ISO 4603 : 1993 TEXTILE GLASS - WOVEN FABRICS - DETERMINATION OF THICKNESS
BS EN 16153 : 2013 LIGHT TRANSMITTING FLAT MULTIWALL POLYCARBONATE (PC) SHEETS FOR INTERNAL AND EXTERNAL USE IN ROOFS, WALLS AND CEILINGS - REQUIREMENTS AND TEST METHODS
ISO 18937:2014 Imaging materials Photographic reflection prints Methods for measuring indoor light stability
S.R. CEN TS 15534-1:2007 WOOD-PLASTICS COMPOSITES (WPC) - PART 1: TEST METHODS FOR CHARACTERISATION OF WPC MATERIALS AND PRODUCTS
I.S. EN 15651-4:2017 SEALANTS FOR NON-STRUCTURAL USE IN JOINTS IN BUILDINGS AND PEDESTRIAN WALKWAYS - PART 4: SEALANTS FOR PEDESTRIAN WALKWAYS
ISO 8296:2003 Plastics — Film and sheeting — Determination of wetting tension
ISO 19252:2008 Plastics — Determination of scratch properties
ISO 2528:2017 Sheet materials — Determination of water vapour transmission rate (WVTR) — Gravimetric (dish) method
UNE-EN 62788-1-4:2017 Measurement procedures for materials used in photovoltaic modules - Part 1-4: Encapsulants - Measurement of optical transmittance and calculation of the solar-weighted photon transmittance, yellowness index, and UV cut-off wavelength
I.S. EN ISO 13468-1:1997 PLASTICS - DETERMINATION OF TOTAL LUMINOUS TRANSMITTANCE OF TRANSPARENT MATERIALS - PART 1: SINGLE-BEAM INSTRUMENT
UNE 53974:2011 Plastics. Expanded polystyrene (EPS) elements for floors with concrete applied in situ
UNI EN ISO 6721-1 : 2011 PLASTICS - DETERMINATION OF DYNAMIC MECHANICAL PROPERTIES - PART 1: GENERAL PRINCIPLES
EN ISO 899-1:2017 Plastics - Determination of creep behaviour - Part 1: Tensile creep (ISO 899-1:2017)
UNI EN 16245-3 : 2013 FIBRE-REINFORCED PLASTIC COMPOSITES - DECLARATION OF RAW MATERIAL CHARACTERISTICS - PART 3: SPECIFIC REQUIREMENTS FOR FIBRE
ISO 11833-1:2012 Plastics Unplasticized poly(vinyl chloride) sheets Types, dimensions and characteristics Part 1: Sheets of thickness not less than 1 mm
ISO 604:2002 Plastics — Determination of compressive properties
EN 60455-3-8:2013 Resin based reactive compounds used for electrical insulation - Part 3: Specifications for individual materials - Sheet 8: Resins for cable accessories
UNI EN 15860 : 2010 PLASTICS - THERMOPLASTIC SEMI-FINISHED PRODUCTS FOR MACHINING - REQUIREMENTS AND TEST METHODS
UNE-EN ISO 1135-3:2017 Transfusion equipment for medical use - Part 3: Blood-taking sets for single use (ISO 1135-3:2016)
UNE-EN 15651-4:2017 Sealants for non-structural use in joints in buildings and pedestrian walkways - Part 4: Sealants for pedestrian walkways
UNE-EN ISO 15527:2014 Plastics - Compression-moulded sheets of polyethylene (PE-UHMW, PE-HD) - Requirements and test methods (ISO 15527:2010)
UNE-EN ISO 22007-4:2017 Plastics - Determination of thermal conductivity and thermal diffusivity - Part 4: Laser flash method (ISO 22007-4:2017)
UNE-EN ISO 30013:2012 Rubber and plastics hoses - Methods of exposure to laboratory light sources - Determination of changes in colour, appearance and other physical properties (ISO 30013:2011)
I.S. EN 50655-1:2017 ELECTRIC CABLES - ACCESSORIES - MATERIAL CHARACTERIZATION - PART 1: FINGERPRINTING FOR RESINOUS COMPOUNDS
EN 14565:2004 Resilient floor coverings - Floor coverings based upon synthetic thermoplastic polymers - Specification
ISO 7823-2:2003 Plastics — Poly(methyl methacrylate) sheets — Types, dimensions and characteristics — Part 2: Extruded sheets
ONORM EN ISO 6721-1 : 2011 PLASTICS - DETERMINATION OF DYNAMIC MECHANICAL PROPERTIES - PART 1: GENERAL PRINCIPLES
ASTM D 5944 : 1996 Test Method for Determination of Temperature of Deflection Under Load (Withdrawn 1998)
ONORM EN ISO 178 : 2013 PLASTICS - DETERMINATION OF FLEXURAL PROPERTIES (ISO 178:2010 + AMD 1:2013)
DIN EN ISO 20568-2:2015-07 (Draft) PLASTICS - FLUOROPOLYMER DISPERSIONS AND MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES (ISO 20568-2:2017)
ASTM D 5927 : 2017 : REDLINE Standard Classification System for and Basis for Specifications for Thermoplastic Polyester (TPES) Injection and Extrusion Materials Based on ISO Test Methods
I.S. EN ISO 899-1:2017 PLASTICS - DETERMINATION OF CREEP BEHAVIOUR - PART 1: TENSILE CREEP (ISO 899-1:2017)
ISO 16241:2005 Notch tensile test to measure the resistance to slow crack growth of polyethylene materials for pipe and fitting products (PENT)
ISO 22621-5:2010 Plastics piping systems for the supply of gaseous fuels for maximum operating pressures up to and including 2 MPa (20 bar) Polyamide (PA) Part 5: Fitness for purpose of the system
ISO 16869:2008 Plastics Assessment of the effectiveness of fungistatic compounds in plastics formulations
ASTM D 5941 : 1996 Standard Test Method for Determination of Izod Impact Strength (Withdrawn 1998)
ASTM D 5870 : 2016 : REDLINE Standard Practice for Calculating Property Retention Index of Plastics
ASTM D 6865 : 2017 : REDLINE Standard Classification System and Basis for Specifications for Acrylonitrile–Styrene–Acrylate (ASA) and Acrylonitrile–EPDM–Styrene (AES) Plastics and Alloys Molding and Extrusion Materials
I.S. EN ISO 180:2001 PLASTICS - DETERMINATION OF IZOD IMPACT STRENGTH (ISO 180:2000)
EN ISO 899-2:2003/A1:2015 Plastics - Determination of creep behaviour - Part 2: Flexural creep by three-point loading - Amendment 1 (ISO 899-2:2003/Amd 1:2015)
I.S. EN ISO 11963:2012 PLASTICS - POLYCARBONATE SHEETS - TYPES, DIMENSIONS AND CHARACTERISTICS (ISO 11963:2012)
I.S. EN ISO 11833-1:2012 PLASTICS - UNPLASTICIZED POLY(VINYL CHLORIDE) SHEETS - TYPES, DIMENSIONS AND CHARACTERISTICS - PART 1: SHEETS OF THICKNESS NOT LESS THAN 1 MM (ISO 11833-1:2012)
EN ISO 845:2009 Cellular plastics and rubbers - Determination of apparent density (ISO 845:2006)
EN ISO 8536-4:2013/A1:2013 INFUSION EQUIPMENT FOR MEDICAL USE - PART 4: INFUSION SETS FOR SINGLE USE, GRAVITY FEED (ISO 8536-4:2010/AMD 1:2013)
I.S. EN ISO 4577:1999 PLASTICS - POLYPROPYLENE AND PROPYLENE-COPOLYMERS - DETERMINATION OF THERMAL OXIDATIVE STABILITY IN AIR - OVEN METHOD
I.S. EN ISO 527-1:2012 PLASTICS - DETERMINATION OF TENSILE PROPERTIES - PART 1: GENERAL PRINCIPLES (ISO 527-1:2012)
DIN EN 13592:2015-09 (Draft) PLASTICS SACKS FOR HOUSEHOLD WASTE COLLECTION - TYPES, REQUIREMENTS AND TEST METHODS
DIN EN 14598-3:2005-07 Reinforced thermosetting moulding compounds - Specification for Sheet Moulding Compound (SMC) and Bulk Moulding Compound (BMC) - Part 3: Specific requirements
DIN EN ISO 10618:2004-11 Carbon fibre - Determination of tensile properties of resin-impregnated yarn (ISO 10618:2004)
DIN EN 13421:2006-05 Plastics - Thermoset moulding compounds - Composites and reinforcement fibres - Preparation of specimens for determining the anisotropy of the properties of compression moulding composites
DIN EN 14598-2:2005-07 Reinforced thermosetting moulding compounds - Specification for Sheet Moulding Compound (SMC) and Bulk Moulding Compound (BMC) - Part 2: Methods of test and general requirements
DIN EN ISO 11403-3 E : 2002 PLASTICS - ACQUISITION AND PRESENTATION OF COMPARABLE MULTIPOINT DATA - PART 3: ENVIRONMENTAL INFLUENCES ON PROPERTIES (ISO 11403-3:2014)
DIN EN ISO 868:2003-10 PLASTICS AND EBONITE - DETERMINATION OF INDENTATION HARDNESS BY MEANS OF A DUROMETER (SHORE HARDNESS)
BS EN ISO 23667:2007 Packaging. Transport packaging for dangerous goods. Rigid plastics and plastics composite IBCs. Compatibility testing
BS EN 14879-2:2006 Organic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media Coatings on metallic components
BS EN ISO 11248:2000 Plastics. Thermosetting moulding materials. Evaluation of short-term performance at elevated temperatures
BS EN 14415:2004 Geosynthetic barriers. Test method for determining the resistance to leaching
BS EN 14869-2:2011 Structural adhesives. Determination of shear behaviour of structural bonds Thick adherends shear test
ISO 18489:2015 Polyethylene (PE) materials for piping systems — Determination of resistance to slow crack growth under cyclic loading — Cracked Round Bar test method
BS EN ISO 11833-2:2006 Plastics. Unplasticized poly(vinyl chloride) sheets. Types, dimensions and characteristics Sheets of thickness less than 1 mm
BS EN ISO 11542-2 : 1999 PLASTICS - ULTRA-HIGH-MOLECULAR-WEIGHT POLYETHYLENE (PE-UHMW) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
BS EN ISO 1622-2:1999 Plastics. Polystrene (PS) moulding and extrusion materials Preparation of test specimens and determination of properties
BS EN 1965-2:2011 Structural adhesives. Corrosion Determination and classification of corrosion to a brass substrate
UNE-EN ISO 175:2011 Plastics - Methods of test for the determination of the effects of immersion in liquid chemicals (ISO 175:2010)
UNE-EN 16245-2:2014 Fibre-reinforced plastic composites - Declaration of raw material characteristics - Part 2: Specific requirements for resin, curing systems, additives and modifiers
BS EN ISO 7765-1:2004 Plastics film and sheeting. Determination of impact resistance by the free-falling dart method Staircase methods
16/30330036 DC : 0 BS EN 62788-2 - MEASUREMENT PROCEDURES FOR MATERIALS USED IN PHOTOVOLTAIC MODULES - PART 2: POLYMERIC MATERIALS USED FOR FRONTSHEETS AND BACKSHEETS
BS EN ISO 3344:1997 Reinforcement products. Determination of moisture content
IEC 62326-20:2016 Printed boards - Part 20: Printed circuit boards for high-brightness LEDs
UNE-EN ISO 11339:2010 Adhesives - T-peel test for flexible-to-flexible bonded assemblies (ISO 11339:2010)
BS EN ISO 11343:2005 Adhesives. Determination of dynamic resistance to cleavage of high-strength adhesive bonds under impact conditions. Wedge impact method
BS EN ISO 868:2003 Plastics and ebonite. Determination of indentation hardness by means of a durometer (Shore hardness)
BS EN ISO 8295:2004 Plastics. Film and sheeting. Determination of the coefficients of friction
UNE-EN 14869-1:2011 Structural adhesives - Determination of shear behaviour of structural bonds - Part 1: Torsion test method using butt-bonded hollow cylinders (ISO 11003-1:2001, modified)
BS EN ISO 9142:2003 Adhesives. Guide to the selection of standard laboratory ageing conditions for testing bonded joints
BS EN ISO 5659-2:2017 Plastics. Smoke generation Determination of optical density by a single-chamber test
BS EN ISO 13468-1:1997 Plastics. Determination of the total luminous transmittance of transparent materials Single-beam instrument
ISO 15015:2011 Plastics Extruded sheets of impact-modified acrylonitrile-styrene copolymers (ABS, AEPDS and ASA) Requirements and test methods
BS EN 14118-3:2003 Reinforcement. Specifications for textile glass mats (chopped strand and continuous filament mats) Specific requirements
ISO 4589-2:2017 Plastics — Determination of burning behaviour by oxygen index — Part 2: Ambient-temperature test
ISO 2559:2011 Textile glass Mats (made from chopped or continuous strands) Designation and basis for specifications
ISO 6383-2:1983 Plastics Film and sheeting Determination of tear resistance Part 2: Elmendorf method
ISO 10964:1993 Adhesives — Determination of torque strength of anaerobic adhesives on threaded fasteners
I.S. EN ISO 7823-1:2003 PLASTICS - POLY(METHYL METHACRYLATE) SHEETS - TYPES, DIMENSIONS AND CHARACTERISTICS - PART 1: CAST SHEETS
I.S. EN ISO 11403-2:2012 PLASTICS - ACQUISITION AND PRESENTATION OF COMPARABLE MULTIPOINT DATA - PART 2: THERMAL AND PROCESSING PROPERTIES (ISO 11403-2:2012)
DIN EN ISO 489:1999-08 Plastics -Determination of refractive index (ISO 489:1999)
EN 12654-1:1998 Textile glass - Yarns - Part 1: Designation
DIN EN 14879-4:2008-01 Organic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media - Part 4: Linings on metallic components
CEN/TS 15534-1:2007 Wood-plastics composites (WPC) - Part 1: Test methods for characterisation of WPC materials and products
DIN EN ISO 9163:2005-07 Textile glass - Rovings - Manufacture of test specimens and determination of tensile strength of impregnated rovings (ISO 9163:2005); German version EN ISO 9163:2005
EN 12586:2007+A1:2011 Child use and care articles - Soother holder - Safety requirements and test methods
DIN ISO 7765-2:2009-02 Plastics film and sheeting - Determination of impact resistance by the free-falling dart method - Part 2: Instrumented puncture test (ISO 7765-2:1994)
DIN EN 14879-2:2007-02 Organic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media - Part 2: Coatings on metallic components
EN 12562 : 1999 TEXTILES - PARA-ARAMID MULTIFILAMENT YARNS - TEST METHODS
EN 12654-3:1998 Textile glass - Yarns - Part 3: General requirements for general applications
DIN EN 14447:2005-07 Fibre reinforced plastics - Glass mat reinforced thermoplastics (GMT) - Determination of flowability and solidification; German version of EN 14447:2005
EN 50655-1:2017 Electric cables - Accessories - Material characterization - Part 1: Fingerprinting for resinous compounds
DIN EN 13592:2017-05 PLASTICS SACKS FOR HOUSEHOLD WASTE COLLECTION - TYPES, REQUIREMENTS AND TEST METHODS
EN 12230:2003 Surfaces for sports areas - Determination of tensile properties of synthetic sports surfaces
DIN EN ISO 175:2011-03 Plastics - Methods of test for the determination of the effects of immersion in liquid chemicals (ISO 175:2010)
DIN EN ISO 306:2014-03 Plastics - Thermoplastic materials - Determination of Vicat softening temperature (VST) (ISO 306:2013)
EN ISO 23667:2007 Packaging - Transport packaging for dangerous goods - Rigid plastics and plastics composite IBCs - Compatibility testing (ISO 23667:2007)
DIN EN ISO 9142:2004-05 Adhesives - Guide to the selection of standard laboratory ageing conditions for testing bonded joints (ISO 9142:2003)
DIN EN ISO 3672-2:2002-07 PLASTICS - UNSATURATED-POLYESTER RESINS (UP-R) - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
DIN EN ISO 178:2013-09 PLASTICS - DETERMINATION OF FLEXURAL PROPERTIES (ISO 178:2010 + AMD.1:2013)
EN 60216-1:2013 Electrical insulating materials - Thermal endurance properties - Part 1: Ageing procedures and evaluation of test results
EN 62878-1-1:2015 Device embedded substrate - Part 1-1: Generic specification - Test methods
EN 60695-2-12:2010/A1:2014 FIRE HAZARD TESTING - PART 2-12: GLOWING/HOT-WIRE BASED TEST METHODS - GLOW-WIRE FLAMMABILITY INDEX (GWFI) TEST METHOD FOR MATERIALS (IEC 60695-2-12:2010/A1:2014)
NF EN ISO 10350-2 : 2011 PLASTICS - ACQUISITION AND PRESENTATION OF COMPARABLE SINGLE-POINT DATA - PART 2: LONG-FIBRE-REINFORCED PLASTICS
EN 13121-3:2016 GRP tanks and vessels for use above ground - Part 3: Design and workmanship
EN 12960:2001/AC:2007 ADHESIVES FOR PAPER AND BOARD, PACKAGING AND DISPOSABLE SANITARY PRODUCTS - DETERMINATION OF SHEAR RESISTANCE
DIN EN ISO 20568-2:2017-10 PLASTICS - FLUOROPOLYMER DISPERSIONS AND MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES (ISO 20568-2:2017)
DIN EN ISO 13445:2006-09 Adhesives - Determination of shear strength of adhesive bonds between rigid substrates by the block-shear method (ISO 13445:2003)
NBR ISO 16486-5 : 2014
I.S. EN 12230:2003 SURFACES FOR SPORTS AREAS - DETERMINATION OF TENSILE PROPERTIES OF SYNTHETIC SPORTS SURFACES
ONORM EN ISO 179-1 : 2010 PLASTICS - DETERMINATION OF CHARPY IMPACT PROPERTIES - PART 1: NON-INSTRUMENTED IMPACT TEST
I.S. EN ISO 6186:1999 PLASTICS - DETERMINATION OF POURABILITY
ONORM EN ISO 306 : 2014 PLASTICS - THERMOPLASTICS MATERIALS - DETERMINATION OF VICAT SOFTENING TEMPERATURE (VST) (ISO 306:2013)
NF EN ISO 179-1 : 2010 PLASTICS - DETERMINATION OF CHARPY IMPACT PROPERTIES - PART 1: NON-INSTRUMENTED IMPACT TEST
VDI 3405 Blatt 1.1:2017-08 (Draft) Additive manufacturing processes - Laser sintering of polymer parts - Qualification of materials
BS 2782-1.136(1994) : 1994 AMD 10687 METHODS OF TESTING PLASTICS - THERMAL PROPERTIES - DETERMINATION OF THE SHORT-TERM PERFORMANCE OF THERMOSETTING MOULDING MATERIALS AT ELEVATED TEMPERATURES
NF ISO 25179 : 2010 ADHESIVES - DETERMINATION OF THE SOLUBILITY OF WATER-SOLUBLE OR ALKALI-SOLUBLE PRESSURE-SENSITIVE ADHESIVES
DIN ISO 7765-2 E : 2009 PLASTICS FILM AND SHEETING - DETERMINATION OF IMPACT RESISTANCE BY THE FREE-FALLING DART METHOD - PART 2: INSTRUMENTED PUNCTURE TEST
DIN EN 13696:2009-02 WOOD FLOORING - TEST METHODS TO DETERMINE ELASTICITY AND RESISTANCE TO WEAR AND IMPACT RESISTANCE
ONORM EN ISO 11542-2 : 2009 PLASTICS - ULTRA-HIGH-MOLECULAR-WEIGHT POLYETHYLENE (PE-UHMW) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
BS ISO 10119:2002 Carbon fibre. Determination of density
ISO 19322:2018 Resilient floor coverings — Specification for floor coverings based on thermoplastic polymers
BS 2782-4.465C(1990) : 1990 AMD 10677 METHODS OF TESTING PLASTICS - CHEMICAL PROPERTIES - DETERMINATION OF MIGRATION OF PLASTICIZERS
06/30160058 DC : 0 BS EN ISO 8536-4 - INFUSION EQUIPMENT FOR MEDICAL USE - PART 4: INFUSION SETS FOR SINGLE USE, GRAVITY FEED
BS ISO 18188:2016 Specification of polypropylene drinking straws
11/30242926 DC : DRAFT MAY 2011 BS ISO 12000 - PLASTICS/RUBBER - POLYMER DISPERSIONS AND RUBBER LATICES (NATURAL AND SYNTHETIC) - DEFINITIONS AND REVIEW OF TEST METHODS
BS ISO 17467-2:2012 Plastics piping systems for the supply of gaseous fuels. Unplasticized polyamide (PA-U) piping systems jointed by solvent cement Pipes
BS ISO 21509 : 2006 PLASTICS AND EBONITE - VERIFICATION OF SHORE DUROMETERS
13/30283691 DC : 0 BS EN ISO 1135-4 - TRANSFUSION EQUIPMENT FOR MEDICAL USE - PART 4: TRANSFUSION SETS FOR SINGLE USE, GRAVITY FEED
I.S. EN ISO 12086-2:2006 PLASTICS - FLUOROPOLYMER DISPERSIONS AND MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
DIN ISO 15014 E : 2015 PLASTICS - EXTRUDED SHEETS OF POLY(VINYLIDENE FLUORIDE) (PVDF) - REQUIREMENTS AND TEST METHODS (ISO 15014:2007)
BS EN 455-4:2009 Medical gloves for single use Requirements and testing for shelf life determination
ISO 4604:2011 Reinforcement fabrics Determination of conventional flexural stiffness Fixed-angle flexometer method
UNE-EN 15836-1:2010 Plastics - Plasticized poly(vinyl chloride) (PVC-P) membranes for inground swimming pools - Part 1: Homogenous membranes of nominal thickness equal to or greater than 0,75 mm
BS 2782-0:1982 Methods of testing plastics Introduction
ISO 22621-1:2007 Plastics piping systems for the supply of gaseous fuels for maximum operating pressures up to and including 2 MPa (20 bar) Polyamide (PA) Part 1: General
16/30340787 DC : 0 BS ISO 13586 - PLASTICS - DETERMINATION OF FRACTURE TOUGHNESS (GIC AND KIC) - LINEAR ELASTIC FRACTURE MECHANICS (LEFM) APPROACH
17/30353428 DC : DRAFT JUNE 2017 BS EN 17129 - CONTINUOUS-FIBRE-REINFORCED PLASTIC COMPOSITES - PULTRUDED UNIDIRECTIONAL RODS - DETERMINATION OF TENSILE PROPERTIES IN PARALLEL TO THE FIBRE DIRECTION
BS EN 62631-1:2011 Dielectric and resistive properties of solid insulating materials General
IEC TS 62989:2018 Primary optics for concentrator photovoltaic systems
BS ISO 25137-2 : 2009 PLASTICS - SULFONE POLYMER MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
ISO 16616:2015 Test methods for natural fibre-reinforced plastic composite (NFC) deck boards
DIN EN 15865:2009-08 ADHESIVES - DETERMINATION OF TORQUE STRENGTH OF ANAEROBIC ADHESIVES ON THREADED FASTENERS
BS EN 16245-5:2013 Fibre-reinforced plastic composites. Declaration of raw material characteristics Specific requirements for core materials
15/30292691 DC : DRAFT FEB 2015 BS ISO 18188 - SPECIFICATION OF POLYPROPYLENE DRINKING STRAWS
07/30165210 DC : 0 BS EN ISO 10350-2 - PLASTICS - ACQUISITION AND PRESENTATION OF COMPARABLE SINGLE-POINT DATA - PART 2: LONG-FIBRE-REINFORCED PLASTICS
BS 2782-3:Method 352F:1996 Methods of testing plastics. Mechanical properties Determination of impact resistance by the free-falling dart method (instrumented puncture test)
02/121892 DC : DRAFT APR 2002 PREN 14447 - FIBRE REINFORCED PLASTICS - GLASS MAT REINFORCED THERMOPLASTICS (GMT) - DETERMINATION OF FLOWABILITY AND SOLIDIFICATION
BS EN 60695-11-10:2013 Fire hazard testing Test flames. 50 W horizontal and vertical flame test methods
ISO 18352:2009 Carbon-fibre-reinforced plastics Determination of compression-after-impact properties at a specified impact-energy level
ISO 15114:2014 Fibre-reinforced plastic composites Determination of the mode II fracture resistance for unidirectionally reinforced materials using the calibrated end-loaded split (C-ELS) test and an effective crack length approach
13/30281054 DC : 0 BS EN 28510-1 - ADHESIVES - PEEL TEST FOR A FLEXIBLE-BONDED-TO-RIGID TEST SPECIMEN ASSEMBLY - PART 1: 90 DEGREES PEEL
BS ISO 11359-2:1999 Plastics. Thermomechanical analysis (TMA) Determination of coefficient of linear thermal expansion and glass transition temperature
I.S. EN ISO 10964:1998 ADHESIVES - DETERMINATION OF TORQUE STRENGTH OF ANAEROBIC ADHESIVES ON THREADED FASTENERS
BS 771-1:1980 Phenolic moulding materials Specification for physical properties (excluding type L2 material)
UNE 104317:2011 Waterproofing. Plunger range determination before the perforation of the waterproofing synthetic geomembranes for water reservoirs
UNE 116005:2012 Manufacturing by additive of caps on plastics. Additive manufacturing. Preparation of test pieces
BS 2782-2.230A(1982) : 1982 PHYSICAL TESTING OF RUBBER - DETERMINATION OF VOLUME RESISTIVITY
BS EN 60216-8:2013 Electrical insulating materials. Thermal endurance properties Instructions for calculating thermal endurance characteristics using simplified procedures
12/30266170 DC : 0 BS EN 15534-1 - COMPOSITES MADE FROM CELLULOSE-BASED MATERIALS AND THERMOPLASTICS (USUALLY CALLED WOOD-POLYMER COMPOSITES (WPC) OR NATURAL FIBRE COMPOSITES (NFC)) - PART 1 : TEST METHODS FOR CHARACTERISATION OF COMPOUNDS AND PRODUCTS
17/30349217 DC : 0 BS EN ISO 21970-2 - PLASTICS - POLYKETONE (PK) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
14/30304007 DC : 0 BS EN 62899-2-1 ED.1 - PRINTED ELECTRONICS - MATERIALS - PART 2-1: CONDUCTIVE MATERIAL INK
UNE-EN 62788-1-6:2017 Measurement procedures for materials used in photovoltaic modules - Part 1-6: Encapsulants - Test methods for determining the degree of cure in Ethylene-Vinyl Acetate
10/30205800 DC : 0 BS ISO 15686-2 - BUILDINGS AND CONSTRUCTED ASSETS - SERVICE LIFE PLANNING - PART 2: SERVICE LIFE PREDICTION PROCEDURES
PREN 17098-2 : DRAFT 2017 PLASTICS - BARRIER FILMS FOR AGRICULTURAL AND HORTICULTURAL SOIL DISINFECTION BY FUMIGATION - PART 2: METHOD FOR FILM PERMEABILITY DETERMINATION USING A STATIC TECHNIQUE
ONORM EN ISO 15527 : 2013 PLASTICS - COMPRESSION-MOULDED SHEETS OF POLYETHYLENE (PE-UHMW, PE-HD) - REQUIREMENTS AND TEST METHODS (ISO 15527:2010)
17/30342172 DC : 0 BS ISO 20975-2 - CARBON-FIBRE-REINFORCED PLASTICS - METHODS FOR MEASUREMENT OF THROUGH-THICKNESS LAMINATE PROPERTIES - PART 2: CONSIDERING SIZE EFFECTS BY FLEXURAL TEST
BS 2782-5.550B(1996) : 1996 AMD 9494
07/30175034 DC : DRAFT DEC 2007 BS ISO 18352 - CARBON-FIBRE-REINFORCED PLASTICS - DETERMINATION OF COMPRESSION-AFTER-IMPACT PROPERTIES AT A SPECIFIED IMPACT ENERGY LEVEL
PREN 28510-1 : DRAFT 2013 ADHESIVES - PEEL TEST FOR A FLEXIBLE-BONDED-TO-RIGID TEST SPECIMEN ASSEMBLY - PART 1: 90 DEGREES PEEL
CEI EN 60695-11-5 : 2006 FIRE HAZARD TESTING - PART 11-5: TEST FLAMES - NEEDLE-FLAME TEST METHOD - APPARATUS, CONFIRMATORY TEST ARRANGEMENT AND GUIDANCE
CEI EN 62631-1 : 2012 DIELECTRIC AND RESISTIVE PROPERTIES OF SOLID INSULATING MATERIALS - PART 1: GENERAL
BS ISO 27547-1:2010 Plastics. Preparation of test specimens of thermoplastic materials using mouldless technologies General principles, and laser sintering of test specimens
ISO 11566:1996 Carbon fibre Determination of the tensile properties of single-filament specimens
DIN EN ISO 877-1:2016-09 (Draft) PLASTICS - METHODS OF EXPOSURE TO SOLAR RADIATION - PART 1: GENERAL GUIDANCE
BS 2782-1.121(1994) : 1994 AMD 8647 METHODS OF TESTING PLASTICS - THERMAL PROPERTIES - GENERAL TEST METHOD FOR DETERMINATION OF TEMPERATURE OF DEFLECTION UNDER LOAD OF PLASTICS
DIN EN 16245-2:2013-08 Fibre-reinforced plastic composites - Declaration of raw material characteristics - Part 2: Specific requirements for resin, curing systems, additives and modifiers
04/30091671 DC : DRAFT APR 2004 BS EN ISO 483 - PLASTICS - SMALL ENCLOSURES FOR CONDITIONING AND TESTING USING AQUEOUS SOLUTIONS TO MAINTAIN HUMIDITY AT CONSTANT VALUE
07/30169693 DC : 0 BS EN 60695-11-11 - FIRE HAZARD TESTING - PART 11-11: TEST FLAMES - DETERMINATION OF THE IGNITION CHARACTERISTIC HEAT FLUX FROM A NON-CONTACTING FLAME SOURCE
BS EN ISO 20028-2:2017 Plastics. Thermoplastic polyester (TP) moulding and extrusion materials Preparation of test specimens and determination of properties
10/30211328 DC : 0 BS ISO 30012 - CARBON-FIBRE-REINFORCED PLASTICS - DETERMINATION OF THE SIZE AND ASPECT RATIO OF CRUSHED OBJECTS
BS EN ISO 22007-4:2017 Plastics. Determination of thermal conductivity and thermal diffusivity Laser flash method
BS 2782-3.353B(1991) : 1991 AMD 8634 METHODS OF TESTING PLASTICS - MECHANICAL PROPERTIES - DETERMINATION OF MULTI-AXIAL IMPACT BEHAVIOUR BY THE INSTRUMENTED PUNCTURE TEST
ISO 2558:2010 Textile glass chopped-strand mats for reinforcement of plastics Determination of time of dissolution of the binder in styrene
DIN EN ISO 1135-5:2016-06 TRANSFUSION EQUIPMENT FOR MEDICAL USE - PART 5: TRANSFUSION SETS FOR SINGLE USE WITH PRESSURE INFUSION APPARATUS (ISO 1135-5:2015)
BS ISO 3598:2011 Textile glass. Yarns. Basis for a specification
CSA ISO/IEC 15457-3 : 2009 : R2014 IDENTIFICATION CARDS - THIN FLEXIBLE CARDS - PART 3: TEST METHODS
12/30254697 DC : 0 BS ISO 16525-9 - ADHESIVES - TEST METHODS FOR ISOTROPICALLY ELECTRICALLY CONDUCTING ADHESIVES - PART 9: DETERMINATION OF HIGH-SPEED SIGNAL-TRANSMISSION CHARACTERISTICS
DIN EN ISO 1135-3 E : 2017 TRANSFUSION EQUIPMENT FOR MEDICAL USE - PART 3: BLOOD-TAKING SETS FOR SINGLE USE (ISO 1135-3:2016)
BS ISO 2797:2017 Textile glass. Rovings. Basis for a specification
12/30258011 DC : 0 BS ISO 11359-1 - PLASTICS - THERMOMECHANICAL ANALYSIS (TMA) - PART 1: GENERAL PRINCIPLES
03/301805 DC : 0 IEC 60695-11-6 TS ED.1 - FIRE HAZARD TESTING - PART 11-6: TEST FLAMES - COMPARATIVE BURNING CHARACTERISTICS OF TUBULAR POLYMERIC MATERIALS SUPPORTED IN A VERTICAL POSITION - APPARATUS AND TEST METHOD
BS 2782-5 Method 540A:1977 Methods of testing plastics. Optical and colour properties, weathering Determination of resistance to change upon exposure under glass to daylight
BS ISO 11833-2 : 1998 AMD 16032 PLASTICS - UNPLASTICIZED POLY (VINYL CHLORIDE) SHEETS - TYPES, DIMENSIONS AND CHARACTERISTICS - SHEETS OF THICKNESS LESS THAN 1 MM
04/30106510 DC : DRAFT JUN 2004 BS ISO 871 - PLASTICS - DETERMINATION OF IGNITION TEMPERATURE USING A HOT-AIR FURNACE
16/30321526 DC : 0 BS ISO 19935-1 - PLASTICS - TEMPERATURE MODULATED DSC - PART 1: GENERAL PRINCIPLES
09/30200088 DC : 0 BS EN 14879-6 - ORGANIC COATING SYSTEMS AND LININGS FOR PROTECTION OF INDUSTRIAL APPARATUS AND PLANTS AGAINST CORROSION CAUSED BY AGGRESSIVE MEDIA - PART 6: COMBINED LININGS WITH TILE AND BRICK LAYERS
BS ISO 871:2006 Plastics. Determination of ignition temperature using a hot-air furnace
I.S. EN 62788-1-4:2016 MEASUREMENT PROCEDURES FOR MATERIALS USED IN PHOTOVOLTAIC MODULES - PART 1-4: ENCAPSULANTS - MEASUREMENT OF OPTICAL TRANSMITTANCE AND CALCULATION OF THE SOLAR-WEIGHTED PHOTON TRANSMITTANCE, YELLOWNESS INDEX, AND UV CUT-OFF WAVELENGTH
BS ISO 19212:2006 Adhesives. Determination of temperature dependence of shear strength
09/30192009 DC : DRAFT MAY 2009 BS ISO 10352 - FIBRE-REINFORCED PLASTICS - MOULDING COMPOUNDS AND PREPREGS - DETERMINATION OF MASS PER UNIT AREA
DIN EN 15336:2007-05 Adhesives - Determination of the time to rupture of bonded joints under static load (ISO 15109:1998 modified)
BS ISO 15105-1:2002 Plastics. Film and sheeting. Determination of gas-transmission rate Differential-pressure method
BS ISO 11003-2:2001 Adhesives. Determination of shear behaviour of structural adhesives Tensile test method using thick adherends
EN ISO 3219:1994 Plastics - Polymers/resins in the liquid state or as emulsions or dispersions - Determination of viscosity using a rotational viscometer with defined shear rate (ISO 3219:1993)
11/30248336 DC : 0 BS ISO 17467-3 - PLASTICS PIPING SYSTEMS FOR THE SUPPLY OF GASEOUS FUELS - UNPLASTICIZED POLYAMIDE (PA-U) PIPING SYSTEMS JOINTED BY SOLVENT CEMENT - PART 3: FITTINGS
DIN EN 14879-6:2010-04 Organic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media - Part 6: Combined linings with tile and brick layers
14/30303657 DC : 0 BS EN ISO 1135-3 - TRANSFUSION EQUIPMENT FOR MEDICAL USE - PART 3: BLOOD-TAKING SET FOR SINGLE USE
BS ISO 18930:2011 Imaging materials. Pictorial colour reflection prints. Methods for evaluating image stability under outdoor conditions
DIN EN ISO 16012 E : 2016 PLASTICS - DETERMINATION OF LINEAR DIMENSIONS OF TEST SPECIMENS (ISO 16012:2015)
BS EN 60464-2:2001 Varnishes used for electrical insulation Methods of test
NF EN ISO 8510-2 : 2011 ADHESIVES - PEEL TEST FOR A FLEXIBLE-BONDED-TO-RIGID TEST SPECIMEN ASSEMBLY - PART 2: 180 DEGREE PEEL
BS ISO 17398:2004 Safety colours and safety signs. Classification, performance and durability of safety signs
BS ISO 10352 : 97 AMD 9684 FIBRE-REINFORCED PLASTICS - MOULDING COMPOUNDS AND PREPREGS - DETERMINATION OF MASS PER UNIT AREA
ISO 12000:2014 Plastics/rubber — Polymer dispersions and rubber latices (natural and synthetic) — Definitions and review of test methods
18/30369387 DC : DRAFT APR 2018 BS EN ISO 8130-13 - COATING POWDERS - PART 13: PARTICLE SIZE ANALYSIS BY LASER DIFFRACTION
DIN EN ISO 20568-2 E : 2017 PLASTICS - FLUOROPOLYMER DISPERSIONS AND MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES (ISO 20568-2:2017)
ISO 5660-1:2015 Reaction-to-fire tests Heat release, smoke production and mass loss rate Part 1: Heat release rate (cone calorimeter method) and smoke production rate (dynamic measurement)
CSA C22.2 No. 0.17 : 2000 : R2013 EVALUATION OF PROPERTIES OF POLYMERIC MATERIALS
12/30254685 DC : DRAFT MAR 2012 BS ISO 16525-5 - ADHESIVES - TEST METHODS FOR ISOTROPICALLY ELECTRICALLY CONDUCTING ADHESIVES - PART 5: SHEAR FATIGUE TESTING
BS ISO 16525-5:2014 Adhesives. Test methods for isotropic electrically conductive adhesives Determination of shear fatigue
ONORM EN ISO 11963 : 2013 PLASTICS - POLYCARBONATE SHEETS - TYPES, DIMENSIONS AND CHARACTERISTICS (ISO 11963:2012)
PREN 50655-1 : DRAFT 2015 ELECTRIC CABLES - ACCESSORIES - MATERIAL CHARACTERIZATION - PART 1: FINGERPRINTING FOR RESINOUS COMPOUNDS
ISO 11659-2:2004 Textile machinery and accessories Machine parts in contact with textile processing oils Part 2: Determination of the impact on polymeric materials
17/30365113 DC : 0 BS EN 60455-3-8 ED.2.0 - RESIN BASED REACTIVE COMPOUNDS USED FOR ELECTRICAL INSULATION - PART 3: SPECIFICATIONS FOR INDIVIDUAL MATERIALS - SHEET 8: RESINS FOR CABLE ACCESSORIES
UNI EN ISO 877-1 : 2011 PLASTICS - METHODS OF EXPOSURE TO SOLAR RADIATION - PART 1: GENERAL GUIDANCE
BS ISO 17281:2002 Plastics. Determination of fracture toughness (<i>G</i><sub>ic</sub> and <i>K</i><sub>ic</sub>) at moderately high loading rates (1 m/s)
02/565097 DC : DRAFT DEC 2002 BS ISO 17398 - SAFETY COLOURS AND SAFETY SIGNS - DURABILITY OF SAFETY SIGNS
DIN ISO 16486-1:2015-07 Plastics piping systems for the supply of gaseous fuels - Unplasticized polyamide (PA-U) piping systems with fusion jointing and mechanical jointing - Part 1: General (ISO 16486-1:2012 + AMD 1:2014)
10/30231832 DC : 0 BS EN 14869-1 - STRUCTURAL ADHESIVES - DETERMINATION OF SHEAR BEHAVIOUR OF STRUCTURAL BONDS - PART 1: TORSION TEST METHOD USING BUTT-BONDED HOLLOW CYLINDERS
BS ISO 14127:2008 Carbon-fibre-reinforced composites. Determination of the resin, fibre and void contents
UNI EN ISO 8510-2 : 2010 ADHESIVES - PEEL TEST FOR A FLEXIBLE-BONDED-TO-RIGID TEST SPECIMEN ASSEMBLY - PART 2: 180 DEGREES PEEL
BS ISO 11357-3:1999 Plastics. Differential scanning calorimetry (DSC) Determination of temperature and enthalpy of melting and crystallization
09/30204161 DC : DRAFT MAY 2009 BS EN 62631-1 - GUIDELINES FOR THE DETERMINATION OF DIELECTRIC AND RESISTIVE PROPERTIES OF SOLID INSULATING MATERIALS - PART 1: GENERAL CONSIDERATIONS
08/30192288 DC : 0 BS EN ISO 179-1 - PLASTICS - DETERMINATION OF CHARPY IMPACT PROPERTIES - PART 1: NON-INSTRUMENTED IMPACT TEST
11/30196213 DC : 0 BS ISO 12817 - FIBRE-REINFORCED PLASTIC COMPOSITES - DETERMINATION OF OPENHOLE COMPRESSION STRENGTH
BS EN 60695-2-12 : 2010 FIRE HAZARD TESTING - PART 2-12: GLOWING/HOT-WIRE BASED TEST METHODS - GLOW-WIRE FLAMMABILITY INDEX (GWFI) TEST METHOD FOR MATERIALS
DIN EN 15651-4:2016-10 (Draft) SEALANTS FOR NON-STRUCTURAL USE IN JOINTS IN BUILDINGS AND PEDESTRIAN WALKWAYS - PART 4: SEALANTS FOR PEDESTRIAN WALKWAYS
07/30151497 DC : 0 ISO 26842 - ADHESIVES - GUIDELINES FOR THE SELECTION OF ADHESIVES FOR INDOOR WOOD PRODUCTS BY DURABILITY TESTING
10/30211421 DC : 0 BS ISO 3598 - TEXTILE GLASS - YARNS - BASIS FOR A SPECIFICATION
I.S. EN ISO 13274:2013 PACKAGING - TRANSPORT PACKAGING FOR DANGEROUS GOODS - PLASTICS COMPATIBILITY TESTING FOR PACKAGING AND IBCS (ISO 13274:2013)
07/30161721 DC : 0 BS ISO 11357-6 - PLASTICS - DIFFERENTIAL SCANNING CALORIMETRY (DSC) - PART 6: DETERMINATION OF OXIDATION INDUCTION TIME (ISOTHERMAL OIT) AND OXIDATION INDUCTION TEMPERATURE (DYNAMIC OIT)
I.S. EN ISO 16396-2:2017 PLASTICS - POLYAMIDE (PA) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES (ISO 16396-2:2017)
PREN 13592 : DRAFT 2015 PLASTICS SACKS FOR HOUSEHOLD WASTE COLLECTION - TYPES, REQUIREMENTS AND TEST METHODS
BS ISO 2897-2 : 1994 AMD 10661 PLASTICS - IMPACT-RESISTANT POLYSTYRENE (PS-I) MOULDING AND EXTRUSION MATERIALS - PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
CR 14376:2002 Adhesives - Adhesives for paper and board, packaging and disposable sanitary products - Description and assessment of the setting process
BS ISO 16525-4:2014 Adhesives. Test methods for isotropic electrically conductive adhesives Determination of shear strength and electrical resistance using rigid-to-rigid bonded assemblies
BS 2782-1 Method 121A and 121B:1991 Methods of testing plastics. Thermal properties Determination of temperature of deflection of plastics under a bending stress
DIN ISO 16486-5:2015-07 Plastics piping systems for the supply of gaseous fuels - Unplasticized polyamide (PA-U) piping systems with fusion jointing and mechanical jointing - Part 5: Fitness for purpose of the system (ISO 16486-5:2012)
ISO 15014:2007 Plastics Extruded sheets of poly(vinylidene fluoride) (PVDF) Requirements and test methods
BS ISO 7391-2 : 1996 AMD 10746 PLASTICS - POLYCARBONATE (PC) MOULDING AND EXTRUSION MATERIALS - PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
08/30180281 DC : DRAFT JUNE 2008 BS EN 1966 - STRUCTURAL ADHESIVES - CHARACTERIZATION OF A SURFACE BY MEASURING ADHESION BY MEANS OF THE THREE POINT BENDING METHOD
UNI EN 15466-2 : 2009 PRIMERS FOR COLD AND HOT APPLIED JOINT SEALANTS - PART 2: DETERMINATION OF RESISTANCE AGAINST ALKALI
04/30081681 DC : DRAFT OCT 2004 ISO 22088-6 - PLASTICS - DETERMINATION OF RESISTANCE TO ENVIRONMENTAL STRESS CRACKING (ESC) - PART 6: SLOW STRAIN RATE METHOD
DIN EN ISO 11357-2:2014-07 PLASTICS - DIFFERENTIAL SCANNING CALORIMETRY (DSC) - PART 2: DETERMINATION OF GLASS TRANSITION TEMPERATURE AND GLASS TRANSITION STEP HEIGHT (ISO 11357-2:2013)
BS 2782-10:Method 1008B:1996 Methods of testing plastics. Glass reinforced plastics Determination of flexural strength on rods made of roving-reinforced resin
DD CEN/TS 15534-1:2007 Wood-plastics composites (WPC) Test methods for characterisation of WPC materials and products
04/30078973 DC : DRAFT OCT 2004 ISO 22088-2 - PLASTICS - DETERMINATION OF RESISTANCE TO ENVIRONMENTAL STRESS CRACKING (ESC) - PART 2: CONSTANT TENSILE STRESS METHOD
BS EN 15865:2009 Adhesives. Determination of torque strength of anaerobic adhesives on threaded fasteners
06/30153862 DC : DRAFT JULY 2006 BS ISO 8031 - RUBBER AND PLASTICS HOSES AND HOSE ASSEMBLIES - DETERMINATION OF ELECTRICAL PROPERTIES
03/311412 DC : DRAFT JULY 2003 IEC 60695-11-21 TS ED.1 - FIRE HAZARD TESTING - PART 11-21: TEST FLAMES - 500 W VERTICAL FLAME TEST FOR TUBULAR POLYMERIC MATERIALS
DIN EN 16776:2016-09 RESILIENT FLOOR COVERINGS - HETEROGENEOUS POLYURETHANE FLOOR COVERINGS - SPECIFICATION
ISO 10119:2002 Carbon fibre Determination of density
EN ISO 11403-3:2014 Plastics - Acquisition and presentation of comparable multipoint data - Part 3: Environmental influences on properties (ISO 11403-3:2014)
DIN EN ISO 11855-5:2015-11 Building environment design - Design, dimensioning, installation and control of embedded radiant heating and cooling systems - Part 5: Installation (ISO 11855-5:2012)
EN IEC 62631-2-1:2018 Dielectric and resistive properties of solid insulating materials - Part 2-1: Relative permittivity and dissipation factor - Technical frequencies (0,1 Hz to 10 MHz) - AC Methods
I.S. EN ISO 7391-2:2006 PLASTICS - POLYCARBONATE (PC) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
PREN 15860 : DRAFT 2016 PLASTICS - THERMOPLASTIC SEMI-FINISHED PRODUCTS FOR MACHINING - REQUIREMENTS AND TEST METHODS
PREN ISO 75-1 : DRAFT 2012 PLASTICS - DETERMINATION OF TEMPERATURE OF DEFLECTION UNDER LOAD PART 1: GENERAL TEST METHOD (ISO/DIS 75-1:2012)
ISO 3598:2011 Textile glass Yarns Basis for a specification
I.S. EN ISO 16012:2015 PLASTICS - DETERMINATION OF LINEAR DIMENSIONS OF TEST SPECIMENS
I.S. EN 62788-1-5:2016 MEASUREMENT PROCEDURES FOR MATERIALS USED IN PHOTOVOLTAIC MODULES - PART 1-5: ENCAPSULANTS - MEASUREMENT OF CHANGE IN LINEAR DIMENSIONS OF SHEET ENCAPSULATION MATERIAL RESULTING FROM APPLIED THERMAL CONDITIONS
I.S. EN ISO 13468-2:2006 PLASTICS - DETERMINATION OF THE TOTAL LUMINOUS TRANSMITTANCE OF TRANSPARENT MATERIALS - PART 2: DOUBLE-BEAM INSTRUMENT
BS ISO 28078-2:2009 Plastics. Poly(phenylene sulfide) (PPS) moulding and extrusion materials Preparation of test specimens and determination of properties
UNE-EN 16245-3:2014 Fibre-reinforced plastic composites - Declaration of raw material characteristics - Part 3: Specific requirements for fibre
UNE-EN 15466-3:2010 Primers for cold and hot applied joint sealants - Part 3: Determination of solids content and evaporation behaviour of volatiles
I.S. EN ISO 178:2010 PLASTICS - DETERMINATION OF FLEXURAL PROPERTIES (ISO 178:2010)
I.S. EN ISO 20028-2:2017 PLASTICS - THERMOPLASTIC POLYESTER (TP) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES (ISO 20028-2:2017)
ISO 18930:2011 Imaging materials Pictorial colour reflection prints Methods for evaluating image stability under outdoor conditions
UNI EN 15870 : 2009 ADHESIVES - DETERMINATION OF TENSILE STRENGTH OF BUTT JOINTS
ISO 3341:2000 Textile glass Yarns Determination of breaking force and breaking elongation
DIN EN 438-2:2016-06 HIGH-PRESSURE DECORATIVE LAMINATES (HPL) - SHEETS BASED ON THERMOSETTING RESINS (USUALLY CALLED LAMINATES) - PART 2: DETERMINATION OF PROPERTIES
ISO/TS 5660-4:2016 Reaction-to-fire tests — Heat release, smoke production and mass loss rate — Part 4: Measurement of low levels of heat release
ISO 19213:2017 Implants for surgery — Test methods of material for use as a cortical bone model
UNE-EN ISO 1135-5:2016 Transfusion equipment for medical use - Part 5: Transfusion sets for single use with pressure infusion apparatus (ISO 1135-5:2015)
DIN EN ISO 16396-2:2017-07 Plastics - Polyamide (PA) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 16396-2:2017)
ISO 10122:2014 Reinforcement materials Tubular braided sleeves Basis for a specification
ISO 16486-3:2012 Plastics piping systems for the supply of gaseous fuels - Unplasticized polyamide (PA-U) piping systems with fusion jointing and mechanical jointing Part 3: Fittings
ISO 10371:1993 Reinforcement materials — Braided tapes — Basis for a specification
ISO 9163:2005 Textile glass — Rovings — Manufacture of test specimens and determination of tensile strength of impregnated rovings
ISO 2797:2017 Textile glass — Rovings — Basis for a specification
CEI EN 60455-3-8 : 2014 RESIN BASED REACTIVE COMPOUNDS USED FOR ELECTRICAL INSULATION - PART 3: SPECIFICATIONS FOR INDIVIDUAL MATERIALS - SHEET 8: RESINS FOR CABLE ACCESSORIES
ONORM EN ISO 7391-2 : 2006 PLASTICS - POLYCARBONATE (PC) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
ISO 15439-3:2007 Plastics piping systems for the supply of gaseous fuels for maximum operating pressure up to and including 0,4 MPa (4 bar) Polyamide (PA) Part 3: Fittings
ISO 16486-4:2016 Plastics piping systems for the supply of gaseous fuels Unplasticized polyamide (PA-U) piping systems with fusion jointing and mechanical jointing Part 4: Valves
UNI EN ISO 11833-1 : 2012 PLASTICS - UNPLASTICIZED POLY(VINYL CHLORIDE) SHEETS - TYPES, DIMENSIONS AND CHARACTERISTICS - PART 1: SHEETS OF THICKNESS NOT LESS THAN 1 MM
PREN ISO 306 : DRAFT 2012 PLASTICS - THERMOPLASTIC MATERIALS - DETERMINATION OF VICAT SOFTENING TEMPERATURE (VST)(ISO/DIS 306:2012)
ISO 10351:1992 Plastics Determination of the combustibility of specimens using a 125 mm flame source
BS EN ISO 2507-1:2017 Thermoplastics pipes and fittings. Vicat softening temperature General test method
UNI EN ISO 178 : 2013 PLASTICS - DETERMINATION OF FLEXURAL PROPERTIES
I.S. EN ISO 1183-2:2004 PLASTICS - METHODS FOR DETERMINING THE DENSITY OF NON-CELLULAR PLASTICS - PART 2: DENSITY GRADIENT COLUMN METHOD
ISO 28078-2:2009 Plastics Poly(phenylene sulfide) (PPS) moulding and extrusion materials Part 2: Preparation of test specimens and determination of properties
ISO 16365-2:2014 Plastics — Thermoplastic polyurethanes for moulding and extrusion — Part 2: Preparation of test specimens and determination of properties
UNE-EN ISO 25137-2:2017 Plastics - Sulfone polymer moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 25137-2:2009)
UNE-EN ISO 20028-2:2017 Plastics - Thermoplastic polyester (TP) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 20028-2:2017)
ISO 16525-5:2014 Adhesives Test methods for isotropic electrically conductive adhesives Part 5: Determination of shear fatigue
ISO 17398:2004 Safety colours and safety signs — Classification, performance and durability of safety signs
ISO 11359-2:1999 Plastics Thermomechanical analysis (TMA) Part 2: Determination of coefficient of linear thermal expansion and glass transition temperature
ASTM D 5575 : 2007 : R2013 Standard Classification System for Copolymers of Vinylidene Fluoride (VDF) with Other Fluorinated Monomers
UNE-EN 62788-1-5:2017 Measurement procedures for materials used in photovoltaic modules - Part 1-5: Encapsulants - Measurement of change in linear dimensions of sheet encapsulation material resulting from applied thermal conditions
NF EN 60695-2-13 : 2011 AMD 1 2014 FIRE HAZARD TESTING - PART 2-13: GLOWING/HOT-WIRE BASED TEST METHODS - GLOW-WIRE IGNITION TEMPERATURE (GWIT) TEST METHOD FOR MATERIALS
EN 62788-1-6:2017 Measurement procedures for materials used in photovoltaic modules - Part 1-6: Encapsulants - Test methods for determining the degree of cure in Ethylene-Vinyl Acetate
CSA C22.2 No. 0.17 : 2000 EVALUATION OF PROPERTIES OF POLYMERIC MATERIALS
I.S. EN ISO 20568-2:2017 PLASTICS - FLUOROPOLYMER DISPERSIONS AND MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES (ISO 20568-2:2017)
ISO 11003-1:2001 Adhesives Determination of shear behaviour of structural adhesives Part 1: Torsion test method using butt-bonded hollow cylinders
EN ISO 11357-3:2018 Plastics - Differential scanning calorimetry (DSC) - Part 3: Determination of temperature and enthalpy of melting and crystallization (ISO 11357-3:2018)
ISO 4898:2010 Rigid cellular plastics Thermal insulation products for buildings Specifications
ISO 8606:1990 Plastics — Prepregs — Bulk moulding compound (BMC) and dough moulding compound (DMC) — Basis for a specification
ISO 15108:1998 Adhesives Determination of strength of bonded joints using a bending-shear method
ISO 4897:1985 Cellular plastics Determination of the coefficient of linear thermal expansion of rigid materials at sub-ambient temperatures
ISO 527-1:2012 Plastics Determination of tensile properties Part 1: General principles
EN ISO 472:2013 Plastics - Vocabulary (ISO 472:2013)
NF EN ISO 10352 : 2011 FIBRE-REINFORCED PLASTICS - MOULDING COMPOUNDS AND PREPREGS - DETERMINATION OF MASS PER UNIT AREA
DIN EN ISO 1874-2:2013-03 PLASTICS - POLYAMIDE (PA) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES (ISO 1874-2:2012)
DIN EN 14879-4 E : 2008 ORGANIC COATING SYSTEMS AND LININGS FOR PROTECTION OF INDUSTRIAL APPARATUS AND PLANTS AGAINST CORROSION CAUSED BY AGGRESSIVE MEDIA - PART 4: LININGS ON METALLIC COMPONENTS
DIN EN ISO 5659-2:2016-02 (Draft) PLASTICS - SMOKE GENERATION - PART 2: DETERMINATION OF OPTICAL DENSITY BY A SINGLE-CHAMBER TEST (ISO 5659-2:2017)
DIN EN ISO 1135-4:2016-06 TRANSFUSION EQUIPMENT FOR MEDICAL USE - PART 4: TRANSFUSION SETS FOR SINGLE USE, GRAVITY FEED (ISO 1135-4:2015)
DIN EN ISO 8986-2 E : 2010 PLASTICS - POLYBUTENE-1 (PB-1) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
DIN EN ISO 10350-2:2011-06 PLASTICS - ACQUISITION AND PRESENTATION OF COMPARABLE SINGLE-POINT DATA - PART 2: LONG-FIBRE-REINFORCED PLASTICS
DIN EN 1464:2010-06 Adhesives - Determination of peel resistance of adhesive bonds - Floating roller method
DIN EN 1465:2009-07 ADHESIVES - DETERMINATION OF TENSILE LAP-SHEAR STRENGTH OF BONDED ASSEMBLIES
DIN EN ISO 23667:2007-10 PACKAGING - TRANSPORT PACKAGING FOR DANGEROUS GOODS - RIGID PLASTICS AND PLASTICS COMPOSITE IBCS - COMPATIBILITY TESTING
DIN EN ISO 868 E : 2003 PLASTICS AND EBONITE - DETERMINATION OF INDENTATION HARDNESS BY MEANS OF A DUROMETER (SHORE HARDNESS)
DIN EN ISO 14530-2:2000-08 Plastics - Unsaturated-polyester powder moulding compounds (UP-PMCs) - Part 2: Preparation of test specimens and determination of properties (ISO 14530-2:1999); German version EN ISO 14530-2:1999
DIN EN ISO 177:2016-09 (Draft) PLASTICS - DETERMINATION OF MIGRATION OF PLASTICIZERS (ISO 177:2016)
DIN EN ISO 483:2006-02 Plastics - Small enclosures for conditioning and testing using aqueous solutions to maintain the humidity at a constant value (ISO 483:2005)
DIN EN ISO 899-2:2015-06 PLASTICS - DETERMINATION OF CREEP BEHAVIOUR - PART 2: FLEXURAL CREEP BY THREE-POINT LOADING (ISO 899-2:2003 + AMD.1:2015)
DIN EN ISO 176:2005-05 Plastics - Determination of loss of plasticizers - Activated carbon method (ISO 176:2005)
DIN EN 14869-1:2011-07 Structural adhesives - Determination of shear behaviour of structural bonds - Part 1: Torsion test method using butt-bonded hollow cylinders (ISO 11003-1:2001, modified)
BS EN ISO 180 : 2001 PLASTICS - DETERMINATION OF IZOD IMPACT STRENGTH
BS EN 12230:2003 Surfaces for sports areas. Determination of tensile properties of synthetic sports surfaces
BS EN ISO 4894-2:1999 Plastics. Styrene/acrylonitrile (SAN) copolymer moulding and extrusion materials Preparation of test specimens and determination of properties
BS EN ISO 9653:2000 Adhesives. Test method for shear strength of adhesive bonds
BS EN ISO 13468-2:2006 Plastics. Determination of the total luminous transmittance of transparent materials Double-beam instrument
BS EN 1465:2009 Adhesives. Determination of tensile lap-shear strength of bonded assemblies
BS EN ISO 15526-2:2004 Plastics. Polyketone (PK) moulding and extrusion materials Preparation of test specimens and determination of properties
DIN EN ISO 4589-2:2016-03 (Draft) PLASTICS - DETERMINATION OF BURNING BEHAVIOUR BY OXYGEN INDEX - PART 2: AMBIENT-TEMPERATURE TEST (ISO 4589-2:2017)
ISO 7823-3:2007 Plastics Poly(methyl methacrylate) sheets Types, dimensions and characteristics Part 3: Continuous cast sheets
BS EN 12586 : 2007 CHILD USE AND CARE ARTICLES - SOOTHER HOLDER - SAFETY REQUIREMENTS AND TEST METHODS
UNE-EN ISO 177:2017 Plastics - Determination of migration of plasticizers (ISO 177:2016)
BS EN ISO 1874-2:2012 Plastics. Polyamide (PA) moulding and extrusion materials Preparation of test specimens and determination of properties
UNE-EN ISO 8536-4:2013 Infusion equipment for medical use - Part 4: Infusion sets for single use, gravity feed (ISO 8536-4:2010)
BS EN ISO 14528-2:2000 Plastics. Melamine-formaldehyde powder moulding compounds (MF-PMCs) Preparation of test specimens and determination of properties
DIN EN ISO 6603-1:2000-10 PLASTICS - DETERMINATION OF PUNCTURE IMPACT BEHAVIOUR OF RIGID PLASTICS - PART 1: NON-INSTRUMENTED IMPACT TESTING
UNE-EN ISO 1890:2010 Reinforcement yarns - Determination of twist (ISO 1890:2009)
BS EN ISO 7823-3:2007 Plastics. Poly(methacrylate) sheets. Types, dimensions and characteristics Continuous cast sheets
BS EN ISO 4577:1999 Plastics. Polypropylene and propylene-copolymers. Determination of thermal oxidative stability in air. Oven method
BS EN 438-2 : 2016 HIGH-PRESSURE DECORATIVE LAMINATES (HPL) - SHEETS BASED ON THERMOSETTING RESINS (USUALLY CALLED LAMINATES) - PART 2: DETERMINATION OF PROPERTIES
BS EN 1967:2002 Structural adhesives. Evaluation of the effectiveness of surface treatment techniques for aluminium using a wet peel test in association with the floating roller method
03/106712 DC : 0 IEC 62326-3 ED.1.0 - PRINTED BOARDS - PART 3: SAFETY CERTIFICATION OF RIGID PRINTED CIRCUIT BOARDS FOR ELECTRONIC ASSEMBLIES
BS EN 14598-2:2005 Reinforced thermosetting moulding compounds. Specification for sheet moulding compound (SMC) and bulk moulding compound (BMC) Methods of test and general requirements
BS EN ISO 10618:2004 Carbon fibre. Determination of tensile properties of resin-impregnated yarn
BS EN ISO 14125 : 1998 FIBRE-REINFORCED PLASTIC COMPOSITES - DETERMINATION OF FLEXURAL PROPERTIES
BS EN ISO 604:2003 Plastics. Determination of compressive properties
BS EN ISO 14129:1998 Fibre-reinforced plastic composites. Determination of the in-plane shear stress/shear strain response, including the in-plane shear modulus and strength by the ± 45° tension test method
ISO 15310:1999 Fibre-reinforced plastic composites Determination of the in-plane shear modulus by the plate twist method
DIN EN ISO 6259-1:2002-02 THERMOPLASTICS PIPES - DETERMINATION OF TENSILE PROPERTIES - PART 1: GENERAL TEST METHOD
I.S. EN ISO 11357-1:2016 PLASTICS - DIFFERENTIAL SCANNING CALORIMETRY (DSC) - PART 1: GENERAL PRINCIPLES (ISO 11357-1:2016)
I.S. EN ISO 15526-2:2004 PLASTICS - POLYKETONE (PK) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
I.S. EN 1264-4:2009 WATER BASED SURFACE EMBEDDED HEATING AND COOLING SYSTEMS - PART 4: INSTALLATION
I.S. EN 13592:2017 PLASTICS SACKS FOR HOUSEHOLD WASTE COLLECTION - TYPES, REQUIREMENTS AND TEST METHODS
DIN EN ISO 7391-2:2006-06 PLASTICS - POLYCARBONATE (PC) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
I.S. EN ISO 10618:2004 CARBON FIBRE - DETERMINATION OF TENSILE PROPERTIES OF RESINIMPREGNATED YARN
ONORM EN ISO 10352 : 2011 FIBRE-REINFORCED PLASTICS - MOULDING COMPOUNDS AND PREPREGS - DETERMINATION OF MASS PER UNIT AREA
DIN EN ISO 11833-1:2012-11 PLASTICS - UNPLASTICIZED POLY(VINYL CHLORIDE) SHEETS - TYPES, DIMENSIONS AND CHARACTERISTICS - PART 1: SHEETS OF THICKNESS NOT LESS THAN 1 MM (ISO 11833-1:2012)
I.S. EN ISO 1135-4:2015 TRANSFUSION EQUIPMENT FOR MEDICAL USE - PART 4: TRANSFUSION SETS FOR SINGLE USE, GRAVITY FEED (ISO 1135-4:2015)
DIN 53362:2003-10 DETERMINING THE FLEXURAL RIGIDITY OF PLASTIC FILM AND WOVEN TEXTILE FABRICS WITH OR WITHOUT PLASTIC COATING BY THE CANTILEVER METHOD
I.S. EN ISO 15013:2007 PLASTICS - EXTRUDED SHEETS OF POLYPROPYLENE (PP) - REQUIREMENTS AND TEST METHODS
I.S. EN ISO 11339:2010 ADHESIVES - T-PEEL TEST FOR FLEXIBLE-TO-FLEXIBLE BONDED ASSEMBLIES
I.S. EN ISO 14663-2:2006 PLASTICS - ETHYLENE/VINYL ALCOHOL (EVOH) COPOLYMER MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
NF EN ISO 11542-2 : 1999 PLASTICS - ULTRA-HIGH-MOLECULAR-WEIGHT POLYETHYLENE (PE-UHMW) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
I.S. EN ISO 845:2009 CELLULAR PLASTICS AND RUBBERS - DETERMINATION OF APPARENT DENSITY
I.S. EN 28510-1:2014 ADHESIVES - PEEL TEST FOR A FLEXIBLE-BONDED-TO-RIGID TEST SPECIMEN ASSEMBLY - PART 1: 90 DEGREES PEEL
I.S. EN ISO 179-1:2010 PLASTICS - DETERMINATION OF CHARPY IMPACT PROPERTIES - PART 1: NON-INSTRUMENTED IMPACT TEST
DIN 53363:2003-10 Determining the tear resistance of plastic film and sheeting by the trouser tear method
DIN EN ISO 11339:2010-06 Adhesives - T-peel test for flexible-to-flexible bonded assemblies (ISO 11339:2010)
DIN EN 1400-2:2002-12 CHILD USE AND CARE ARTICLES - SOOTHERS FOR BABIES AND YOUNG CHILDREN - PART 2: MECHANICAL REQUIREMENTS AND TESTS
DIN EN ISO 10964:1997-10 ADHESIVES - DETERMINATION OF TORQUE STRENGTH OF ANAEROBIC ADHESIVES ON THREADED FASTENERS
I.S. EN 1965-2:2011 STRUCTURAL ADHESIVES - CORROSION - PART 2: DETERMINATION AND CLASSIFICATION OF CORROSION TO A BRASS SUBSTRATE
I.S. EN ISO 2898-2:2008 PLASTICS - PLASTICIZED POLY(VINYL CHLORIDE) (PVC-P) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
EN ISO 11963:2012 Plastics - Polycarbonate sheets - Types, dimensions and characteristics (ISO 11963:2012)
DIN EN 28510-1:2014-07 ADHESIVES - PEEL TEST FOR A FLEXIBLE-BONDED-TO-RIGID TEST SPECIMEN ASSEMBLY - PART 1: 90 DEGREES PEEL
DIN EN ISO 11343:2005-08 ADHESIVES - DETERMINATION OF DYNAMIC RESISTANCE TO CLEAVAGE OF HIGH-STRENGTH ADHESIVE BONDS UNDER IMPACT CONDITIONS - WEDGE IMPACT METHOD
I.S. EN ISO 4589-2:2017 PLASTICS - DETERMINATION OF BURNING BEHAVIOUR BY OXYGEN INDEX - PART 2: AMBIENT-TEMPERATURE TEST (ISO 4589-2:2017)
DIN EN ISO 11501:2004-10 Plastics - Film and sheeting - Determination of dimensional change on heating (ISO 11501:1995)
I.S. EN ISO 4894-2:1999 PLASTICS - STYRENE/ACRYLONITRILE (SAN) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
DIN EN ISO 11833-2:2006-06 Plastics - Unplasticized poly(vinyl chloride) sheets - Types, dimensions and characteristics - Part 2: Sheets of thickness less than 1 mm (ISO 11833-2:1998)
I.S. EN ISO 5659-2:2017 PLASTICS - SMOKE GENERATION - PART 2: DETERMINATION OF OPTICAL DENSITY BY A SINGLE-CHAMBER TEST (ISO 5659-2:2017)
I.S. EN ISO 177:2017 PLASTICS - DETERMINATION OF MIGRATION OF PLASTICIZERS (ISO 177:2016)
I.S. EN ISO 4892-1:2016 PLASTICS - METHODS OF EXPOSURE TO LABORATORY LIGHT SOURCES - PART 1: GENERAL GUIDANCE (ISO 4892-1:2016)
I.S. EN ISO 8256:2004 PLASTICS - DETERMINATION OF TENSILE-IMPACT STRENGTH
I.S. EN 12586:2007 CHILD USE AND CARE ARTICLES - SOOTHER HOLDER - SAFETY REQUIREMENTS AND TEST METHODS
I.S. EN 1464:2010 ADHESIVES - DETERMINATION OF PEEL RESISTANCE OF ADHESIVE BONDS - FLOATING ROLLER METHOD
I.S. EN 14869-1:2011 STRUCTURAL ADHESIVES - DETERMINATION OF SHEAR BEHAVIOUR OF STRUCTURAL BONDS - PART 1: TORSION TEST METHOD USING BUTT-BONDED HOLLOW CYLINDERS
I.S. EN 14869-2:2011 STRUCTURAL ADHESIVES - DETERMINATION OF SHEAR BEHAVIOUR OF STRUCTURAL BONDS - PART 2: THICK ADHERENDS SHEAR TEST
EN 62788-1-4:2016 Measurement procedures for materials used in photovoltaic modules - Part 1-4: Encapsulants - Measurement of optical transmittance and calculation of the solar-weighted photon transmittance, yellowness index, and UV cut-off wavelength
I.S. EN ISO 11403-3:2014 PLASTICS - ACQUISITION AND PRESENTATION OF COMPARABLE MULTIPOINT DATA - PART 3: ENVIRONMENTAL INFLUENCES ON PROPERTIES (ISO 11403-3:2014)
I.S. EN ISO 306:2013 PLASTICS - THERMOPLASTIC MATERIALS - DETERMINATION OF VICAT SOFTENING TEMPERATURE (VST) (ISO 306:2013)
I.S. EN ISO 11542-2:1999 PLASTICS - ULTRA-HIGH-MOLECULAR-WEIGHT POLYETHYLENE (PE-UHMW) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
DIN EN ISO 11963:2013-03 PLASTICS - POLYCARBONATE SHEETS - TYPES, DIMENSIONS AND CHARACTERISTICS (ISO 11963:2012)
I.S. EN 12654-1:1999 TEXTILE GLASS - YARNS - DESIGNATION
I.S. EN ISO 13927:2015 PLASTICS - SIMPLE HEAT RELEASE TEST USING A CONICAL RADIANT HEATER AND A THERMOPILE DETECTOR (ISO 13927:2015)
I.S. EN ISO 604:2003 PLASTICS - DETERMINATION OF COMPRESSIVE PROPERTIES
DIN 16972:1995-03 COMPRESSION MOULDED PLATES MADE OF POLYETHYLENE HIGH DENSITY (PE-UHMW), (PE-HMW), (PE-HD) - TECHNICAL SPECIFICATIONS
I.S. EN 1966:2009 STRUCTURAL ADHESIVES - CHARACTERIZATION OF A SURFACE BY MEASURING ADHESION BY MEANS OF THE THREE POINT BENDING METHOD
DIN EN ISO 877-1:2011-03 Plastics - Methods of exposure to solar radiation - Part 1: General guidance (ISO 877-1:2009)
DIN EN ISO 15526-2:2004-10 PLASTICS - POLYKETONE (PK) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
I.S. EN ISO 12017:1997 PLASTICS - POLY(METHYL METHACRYLATE) DOUBLE- AND TRIPLE-SKIN SHEETS - TEST METHODS
I.S. EN ISO 1889:2009 REINFORCEMENT YARNS - DETERMINATION OF LINEAR DENSITY
I.S. EN ISO 1874-2:2012 PLASTICS - POLYAMIDE (PA) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES (ISO 1874-2:2012)
I.S. EN ISO 6383-1:2015 PLASTICS - FILM AND SHEETING - DETERMINATION OF TEAR RESISTANCE - PART 1: TROUSER TEAR METHOD (ISO 6383-1:2015)
DIN EN 13121-3:2016-10 GRP TANKS AND VESSELS FOR USE ABOVE GROUND - PART 3: DESIGN AND WORKMANSHIP
DIN EN ISO 11502:2005-10 PLASTICS - FILM AND SHEETING - DETERMINATION OF BLOCKING RESISTANCE
EN ISO 11542-2:1998/AC:2008 PLASTICS - ULTRA-HIGH-MOLECULAR-WEIGHT POLYETHYLENE (PE-UHMW) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
I.S. EN ISO 175:2010 PLASTICS - METHODS OF TEST FOR THE DETERMINATION OF THE EFFECTS OF IMMERSION IN LIQUID CHEMICALS
I.S. EN ISO 899-2:2003 PLASTICS - DETERMINATION OF CREEP BEHAVIOUR - PART 2: FLEXURAL CREEP BY THREE-POINT LOADING (ISO 899-2:2003)
I.S. EN ISO 1890:2009 REINFORCEMENT YARNS - DETERMINATION OF TWIST
I.S. EN 1465:2009 ADHESIVES - DETERMINATION OF TENSILE LAP-SHEAR STRENGTH OF BONDED ASSEMBLIES
I.S. EN ISO 7823-3:2007 PLASTICS - POLY(METHYL METHACRYLATE) SHEETS - TYPES, DIMENSIONS AND CHARACTERISTICS - PART 3: CONTINUOUS CAST SHEETS
UNI EN ISO 472 : 2013 PLASTICS - VOCABULARY
NBR ISO 16486-2 : 2013 PLASTICS PIPING SYSTEMS FOR THE SUPPLY OF GASEOUS FUELS - UNPLASTICIZED POLYAMIDE (PA-U) PIPING SYSTEMS WITH FUSION JOINTING AND MECHANICAL JOINTING - PART 2: PIPES
OVE/ONORM EN 60695-2-12 : 2015 FIRE HAZARD TESTING - PART 2-12: GLOWING/HOT-WIRE BASED TEST METHODS - GLOW-WIRE FLAMMABILITY INDEX (GWFI) TEST METHOD FOR MATERIALS (IEC 60695-2-12:2010 + A1:2014)
BS 2782-3 Method 365D:1991 Methods of testing plastics. Mechanical properties Determination of hardness by the ball indentation method
NBR IEC 60695-2-12 : 2013 FIRE HAZARD TESTING - PART 2-12: GLOWING/HOT-WIRE BASED TEST METHODS - GLOW-WIRE FLAMMABILITY INDEX (GWFI) TEST METHOD FOR MATERIALS
BS 2782-5:Method 552A:1999 Methods of testing plastics. Optical and colour properties, weathering Determination of changes in colour and variations in properties after exposure to daylight under glass, natural weathering or laboratory light sources
BS 2782-6:Methods 620A to 620D:1991 Methods of testing plastics. Dimensional properties Determination of density and relative density of non-cellular plastics - Methods 620A to 620D:Determination of density and relative density of non-cellular plastics
VDI 2736 Blatt 1:2016-07 Thermoplastic gear wheels - Materials, material selection, production methods, production tolerances, form design
VDI 3958 Blatt 12:2004-02 Environmental simulation - Effects of acidic precipitation on polymers - Test methods
VDI 3405 Blatt 1:2013-10 Additive manufacturing processes, rapid manufacturing - Laser sintering of polymer parts - Quality control
BS 2782-5.540D(1999) : 1999 AMD 13148 METHODS OF TESTING PLASTICS - OPTICAL AND COLOUR PROPERTIES, WEATHERING - METHODS OF EXPOSURE TO LABORATORY LIGHT SOURCES - GENERAL GUIDANCE
BS 5350-C12:1994 Methods of test for adhesives. Adhesively bonded joints: mechanical tests 180° peel test for flexible-to-flexible bonded assemblies (T-peel test)
NBR IEC 60695-2-13 : 2013 FIRE HAZARD TESTING - PART 2-13: GLOWING/HOT-WIRE BASED TEST METHODS - GLOW-WIRE IGNITION TEMPERATURE (GWIT) TEST METHOD FOR MATERIALS
VDI 2083 Blatt 20:2016-10 (Draft) Cleanroom technology - Determination of the desorption kinetics of materials after fumigating
OVE/ONORM EN 60695-2-13 : 2015 FIRE HAZARD TESTING - PART 2-13: GLOWING/HOT-WIRE BASED TEST METHODS - GLOW-WIRE IGNITION TEMPERATURE (GWIT) TEST METHOD FOR MATERIALS (IEC 60695-2-13:2010 + A1:2014)
BS 2782-0:1992 Methods of testing plastics Introduction
BS 2782-8.830A(1999) : 1999 AMD 13097 METHODS OF TESTING PLASTICS - OTHER PROPERTIES - METHODS OF TEST FOR THE DETERMINATION OF THE EFFECTS OF IMMERSION IN LIQUID CHEMICALS
NBR ISO 16486-1 : 2013 PLASTICS PIPING SYSTEMS FOR THE SUPPLY OF GASEOUS FUELS - UNPLASTICIZED POLYAMIDE (PA-U) PIPING SYSTEMS WITH FUSION JOINTING AND MECHANICAL JOINTING - PART 1: GENERAL
ONORM EN ISO 11403-2 : 2012 PLASTICS - ACQUISITION AND PRESENTATION OF COMPARABLE MULTIPOINT DATA - PART 2: THERMAL AND PROCESSING PROPERTIES (ISO 11403-2:2012)
BS 2782-8.824A(1996) : 1996 AMD 15286 METHODS OF TESTING PLASTICS - OTHER PROPERTIES - FILM AND SHEETING - DETERMINATION OF THE COEFFICIENTS OF FRICTION
VDI/VDE 2616 Blatt 2:2014-07 Hardness testing of plastics and elastomers
BS 2782-5.531A(1999) : 1999 PLASTICS - DETERMINATION OF REFRACTIVE INDEX
VDI 2019:2016-04 Testing the adhesion of thermoplastic elastomers (TPE) on substrates
DIN EN ISO 1135-3:2017-05 TRANSFUSION EQUIPMENT FOR MEDICAL USE - PART 3: BLOOD-TAKING SETS FOR SINGLE USE (ISO 1135-3:2016)
BS 7933-1:2007 Electric cables. Accessories. Material characterisation Fingerprinting and type tests for resinous compounds
BS 903-C1:1991 Physical testing of rubber Determination of surface resistivity
NBR ISO 16486-3 : 2013 PLASTICS PIPING SYSTEMS FOR THE SUPPLY OF GASEOUS FUELS - UNPLASTICIZED POLYAMIDE (PA-U) PIPING SYSTEMS WITH FUSION JOINTING AND MECHANICAL JOINTING - PART 3: FITTINGS
10/30207724 DC : 0 BS ISO 18941 - IMAGING MATERIALS - COLOUR REFLECTION PRINTS - TEST METHOD FOR OZONE GAS FADING STABILITY
DIN EN 15836-1:2010-11 Plastics - Plasticized poly(vinyl chloride) (PVC-P) membranes for inground swimming pools - Part 1: Homogenous membranes of nominal thickness equal to or greater than 0,75 mm
ASTM D 5575 : 2007 Standard Classification System for Copolymers of Vinylidene Fluoride (VDF) with Other Fluorinated Monomers
06/30146379 DC : DRAFT SEP 2006 ISO 15439-3 - PLASTICS PIPING SYSTEMS FOR THE SUPPLY OF GASEOUS FUELS FOR MAXIMUM OPERATING PRESSURE UP TO AND INCLUDING 4 BAR - POLYAMIDE (PA) - PART 3: FITTINGS
DIN EN ISO 22007-6:2015-05 PLASTICS - DETERMINATION OF THERMAL CONDUCTIVITY AND THERMAL DIFFUSIVITY - PART 6: COMPARATIVE METHOD FOR LOW THERMAL CONDUCTIVITIES USING A TEMPERATURE-MODULATION TECHNIQUE (ISO 22007-6:2014)
EN 4691-1:2017 Aerospace series - Tie rod with integrated bolts - Part 1: Technical specification
UNI EN ISO 11357-3 : 2013 PLASTICS - DIFFERENTIAL SCANNING CALORIMETRY (DSC) - PART 3: DETERMINATION OF TEMPERATURE AND ENTHALPY OF MELTING AND CRYSTALLIZATION
ISO 472:2013 Plastics Vocabulary
16/30319043 DC : 0 BS EN ISO 4589-2 - PLASTICS - DETERMINATION OF BURNING BEHAVIOUR BY OXYGEN INDEX - PART 2: AMBIENT-TEMPERATURE TEST
12/30254691 DC : DRAFT MAR 2012 BS ISO 16525-7 - ADHESIVES - TEST METHODS FOR ISOTROPICALLY ELECTRICALLY CONDUCTING ADHESIVES - PART 7: ENVIRONMENTAL TEST METHODS
DIN EN ISO 22007-4:2016-10 (Draft) PLASTICS - DETERMINATION OF THERMAL CONDUCTIVITY AND THERMAL DIFFUSIVITY - PART 4: LASER FLASH METHOD (ISO 22007-4:2017)
BS ISO 17541:2014 Plastics. Quantitative evaluation of scratch-induced damage and scratch visibility
BS ISO 5659-2:1994 Plastics. Smoke generation Determination of specific optical density
BS EN ISO 22007-6:2015 Plastics. Determination of thermal conductivity and thermal diffusivity Comparative method for low thermal conductivities using a temperature-modulation technique
BS ISO 22621-5:2010 Plastics piping systems for the supply of gaseous fuels for maximum operating pressures up to and including 2 MPa (20 bar). Polyamide (PA) Fitness for purpose of the system
15/30325650 DC : 0 BS EN 50655-1 - ELECTRIC CABLES - ACCESSORIES - MATERIAL CHARACTERIZATION - PART 1: FINGERPRINTING FOR RESINOUS COMPOUNDS
15/30327856 DC : 0 BS ISO 20558-2 - PLASTICS - POLY(PHENYLENE SULFIDE) (PPS) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMEN AND DETERMINATION OF PROPERTIES
I.S. EN ISO 4600:1998 PLASTICS - DETERMINATION OF ENVIRONMENTAL STRESS CRACKING (ESC) - BALL OR PIN IMPRESSION METHOD
BS EN ISO 25137-2:2017 Plastics. Sulfone polymer moulding and extrusion materials Preparation of test specimens and determination of properties
BS EN ISO 178 : 2010 PLASTICS - DETERMINATION OF FLEXURAL PROPERTIES
BS EN ISO 8510-2:2010 Adhesives. Peel test for a flexible-bonded-to-rigid test specimen assembly 180 degree peel
DIN EN ISO 11358-1 E : 2014 PLASTICS - THERMOGRAVIMETRY (TG) OF POLYMERS - PART 1: GENERAL PRINCIPLES (ISO 11358-1:2014)
ISO 15107:1998 Adhesives Determination of cleavage strength of bonded joints
05/30130524 DC : DRAFT MAR 2005 ISO 22621-1 - PLASTICS PIPING SYSTEMS FOR THE SUPPLY OF GASEOUS FUELS FOR MAXIMUM OPERATING UP TO AND INCLUDING 2 MPA (20 BAR) - POLYAMIDE (PA) - PART 1: GENERAL
EN ISO 11502:2005 Plastics - Film and sheeting - Determination of blocking resistance (ISO 11502:1995)
13/30234849 DC : 0 BS EN ISO 13927 - PLASTICS - SIMPLE HEAT RELEASE TEST USING A CONICAL RADIANT HEATER AND A THERMOPILE DETECTOR
I.S. EN ISO 9142:2004 ADHESIVES - GUIDE TO THE SELECTION OF STANDARD LABORATORY AGEING CONDITIONS FOR TESTING BONDED JOINTS
17/30336222 DC : 0 BS EN 62899-203 - PRINTED ELECTRONICS - PART 203 - MATERIALS - SEMICONDUCTOR INK
I.S. EN 60695-11-5:2017 FIRE HAZARD TESTING - PART 11-5: TEST FLAMES - NEEDLE-FLAME TEST METHOD - APPARATUS, CONFIRMATORY TEST ARRANGEMENT AND GUIDANCE
11/30236286 DC : 0 BS EN ISO 11963 - PLASTICS - POLYCARBONATE SHEETS - TYPES, DIMENSIONS AND CHARACTERISTICS
BS ISO 15686-2:2012 Buildings and constructed assets. Service life planning Service life prediction procedures
BS ISO 16525-1:2014 Adhesives. Test methods for isotropic electrically conductive adhesives General test methods
BS IEC 62899-202:2016 Printed electronics Materials. Conductive ink
BS EN 60455-3-8:2013 Resin based reactive compounds used for electrical insulation Specifications for individual materials. Sheet 8: Resins for cable accessories
08/30177314 DC : DRAFT JAN 2008 BS ISO 11357-3 - PLASTICS - DIFFERENTIAL SCANNING CALORIMETRY (DSC) - PART 3: DETERMINATION OF TEMPERATURE AND ENTHALPY OF MELTING AND CRYSTALLIZATION
09/30206613 DC : 0 BS EN 60695-11-20 ED.2 - FIRE HAZARD TESTING - PART 11-20: TEST FLAMES - 500 W FLAME TEST METHODS
BS ISO 15024:2001 Fibre-reinforced plastic composites. Determination of mode I interlaminar fracture toughness, <i>G</i><sub>ic</sub>, for unidirectionally reinforced materials
DIN EN 16245-4:2013-07 FIBRE-REINFORCED PLASTIC COMPOSITES - DECLARATION OF RAW MATERIAL CHARACTERISTICS - PART 4: SPECIFIC REQUIREMENTS FOR FABRICS
DIN EN 16776 E : 2016 RESILIENT FLOOR COVERINGS - HETEROGENEOUS POLYURETHANE FLOOR COVERINGS - SPECIFICATION
DIN ISO 18352:2017-11 CARBON-FIBRE-REINFORCED PLASTICS - DETERMINATION OF COMPRESSION-AFTER-IMPACT PROPERTIES AT A SPECIFIED IMPACT-ENERGY LEVEL (ISO 18352:2009)
BS ISO 4900:2011 Textile glass. Mats and fabrics. Determination of contact mouldability
BS ISO 19213:2017 Implants for surgery. Test methods of material for use as a cortical bone model
08/30160325 DC : DRAFT MAR 2008 BS ISO 27547-1 - PLASTICS - PREPARATION OF TEST SPECIMENS OF THERMOPLASTIC MATERIALS USING MOULDLESS TECHNOLOGIES - PART 1: GENERAL PRINCIPLES, AND LASER-SINTERING OF SPECIMENS
07/30169691 DC : 0 BS EN 60695-2-13 - FIRE HAZARD TESTING - PART 2-13: GLOWING/HOT-WIRE BASED TEST METHODS - GLOW-WIRE IGNITABILITY (GWIT) TEST METHOD FOR MATERIALS
BS EN 16776:2016 Resilient floor coverings. Heterogeneous polyurethane floor coverings. Specification
14/30295044 DC : 0 BS ISO 19095-3 - ADHESIVES - EVALUATION OF THE ADHESION INTERFACE PERFORMANCE IN PLASTIC-METAL ASSEMBLIES - PART 3: TEST METHODS
10/30231835 DC : DRAFT SEP 2010 BS EN 1965-2 - STRUCTURAL ADHESIVES - CORROSION - PART 2: DETERMINATION AND CLASSIFICATION OF CORROSION TO A BRASS SUBSTRATE
BS ISO 15100:2000 Plastics. Reinforcement fibres. Chopped strands. Determination of bulk density
14/30283167 DC : 0 BS ISO 18263-2 - PLASTICS - MIXTURES OF POLYPROPYLENE (PP) AND POLYETHYLENE (PE) RECYCLATE DERIVED FROM PP AND PE USED FOR FLEXIBLE AND RIGID CONSUMENR PACKAGING - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
17/30342148 DC : 0 BS ISO 19821 - DETERMINATION OF SPAN RATING FOR NATURAL FIBER-REINFORCED PLASTIC COMPOSITE (NFC) DECK BOARDS
11/30211349 DC : 0 BS ISO 13636 - PLASTICS - FILM AND SHEETING - NON-ORIENTED POLY(ETHYLENE TEREPHTHALATE) (PET) SHEETS
DIN EN ISO 11357-3:2013-04 PLASTICS - DIFFERENTIAL SCANNING CALORIMETRY (DSC) - PART 3: DETERMINATION OF TEMPERATURE AND ENTHALPY OF MELTING AND CRYSTALLIZATION (ISO 11357-3:2011)
DIN EN 15336 E : 2007 ADHESIVES - DETERMINATION OF THE TIME TO RUPTURE OF BONDED JOINTS UNDER STATIC LOAD
11/30242905 DC : 0 BS EN ISO 3673-2 - PLASTICS - EPOXY RESINS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
ISO 25179:2010 Adhesives Determination of the solubility of water-soluble or alkali-soluble pressure-sensitive adhesives
DIN EN ISO 306 E : 2014 PLASTICS - THERMOPLASTIC MATERIALS - DETERMINATION OF VICAT SOFTENING TEMPERATURE (VST) (ISO 306:2013)
DIN ISO 16486-2:2015-07 Plastics piping systems for the supply of gaseous fuels - Unplasticized polyamide (PA-U) piping systems with fusion jointing and mechanical jointing - Part 2: Pipes (ISO 16486-2:2012 + AMD 1:2014)
UNI EN 16245-4 : 2013 FIBRE-REINFORCED PLASTIC COMPOSITES - DECLARATION OF RAW MATERIAL CHARACTERISTICS - PART 4: SPECIFIC REQUIREMENTS FOR FABRICS
ISO 4603:1993 Textile glass — Woven fabrics — Determination of thickness
17/30368428 DC : 0 BS ISO 15314 - PLASTICS - METHODS FOR MARINE EXPOSURE
11/30239983 DC : DRAFT MAR 2011 BS EN 16245-4 - FIBRE-REINFORCED PLASTIC COMPOSITES - DECLARATION OF RAW MATERIAL CHARACTERISTICS - PART 4: SPECIFIC REQUIREMENTS FOR FABRICS
11/30192003 DC : 0 BS EN ISO 7792-2 - PLASTICS - THERMOPLASTIC POLYESTER (TP) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
BS 2782-3.352E(1996) : 1996 AMD 15287 METHODS OF TESTING PLASTICS - MECHANICAL PROPERTIES - DETERMINATION OF IMPACT RESISTANCE BY THE FREE-FALLING DART METHOD (STAIRCASE METHOD)
01/121385 DC : 0 ISO/DIS 15989 - PLASTICS - FILM AND SHEETING - MEASUREMENT OF WATER-CONTACT ANGLE OF CORONA-TREATED FILMS
14/30295274 DC : 0 BS EN 1794-3 - ROAD TRAFFIC NOISE REDUCING DEVICES - NON-ACOUSTIC PERFORMANCE - PART 3: REACTION TO FIRE - BURNING BEHAVIOUR OF NOISE REDUCING DEVICES AND CLASSIFICATION
UNE-EN 16465:2016 Plastics - Methods for the calibration of black-standard and white-standard thermometers and black-panel and white-panel thermometers for use in natural and artificial weathering
DIN EN ISO 13274:2014-06 PACKAGING - TRANSPORT PACKAGING FOR DANGEROUS GOODS - PLASTICS COMPATIBILITY TESTING FOR PACKAGING AND IBCS (ISO 13274:2013 + COR. 1:2014)
BS EN 16465:2015 Plastics. Methods for the calibration of black-standard and white-standard thermometers and black-panel and white-panel thermometers for use in natural and artificial weathering
UNI EN 455-4 : 2009 MEDICAL GLOVES FOR SINGLE USE - PART 4: REQUIREMENTS AND TESTING FOR SHELF LIFE DETERMINATION
07/30155372 DC : 0 BS ISO 877-1 - PLASTICS - METHODS OF EXPOSURE TO SOLAR RADIATION - PART 1: GENERAL GUIDANCE
ESPECIFICACION UNE 0059:2017 Fiberglass reinforced polyester poles for overhead power distribution lines and telephony lines
UNE-EN 15836-2:2010 Plastics - Plasticized poly(vinyl chloride) (PVC-P) membranes for inground swimming pools - Part 2: Reinforced membranes of nominal thickness equal to or greater than 1,5 mm
NF EN 60695-2-12 : 2011 AMD 1 2014 FIRE HAZARD TESTING - PART 2-12: GLOWING/HOT-WIRE BASED TEST METHODS - GLOW-WIRE FLAMMABILITY INDEX (GWFI) TEST METHOD FOR MATERIALS
BS ISO 11403-2 : 95 AMD 10691 PLASTICS - ACQUISITION AND PRESENTATION OF COMPARABLE MULTIPOINT DATA - THERMAL AND PROCESSING PROPERTIES
BS ISO 10371:1993 Fibre reinforced plastics. Braided tapes for composite materials reinforcement. Basis for a specification
I.S. EN 1794-3:2016 ROAD TRAFFIC NOISE REDUCING DEVICES - NON-ACOUSTIC PERFORMANCE - PART 3: REACTION TO FIRE - BURNING BEHAVIOUR OF NOISE REDUCING DEVICES AND CLASSIFICATION
PD ISO/TS 5660-4:2016 Reaction-to-fire tests. Heat release, smoke production and mass loss rate Measurement of low levels of heat release
BS ISO 10122:2014 Reinforcement materials. Tubular braided sleeves. Basis for a specification
13/30240167 DC : 0 BS ISO 16365-2 - PLASTICS - THERMOPLASTIC POLYURETHANES FOR MOULDING AND EXTRUSION - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
06/30148148 DC : DRAFT MAR 2006 EN ISO 2577 - PLASTICS - THERMOSETTING MOULDING MATERIALS - DETERMINATION OF SHRINKAGE
02/123818 DC : DRAFT OCT 2002 BS EN 14565 - RESILIENT FLOOR COVERINGS - FLOOR COVERINGS BASED UPON SYNTHETIC THERMOPLASTIC POLYMERS - SPECIFICATION
ASTM D 618 : 2013 : REDLINE Standard Practice for Conditioning Plastics for Testing
UNI EN ISO 11358-1 : 2014 PLASTICS - THERMOGRAVIMETRY (TG) OF POLYMERS - PART 1: GENERAL PRINCIPLES
BS 7933-1:1998 Electric cables. Accessories. Material characterization Resinous compounds before cure and in the cured state
BS ISO 18937:2014 Imaging materials. Photographic reflection prints. Methods for measuring indoor light stability
BS 2782-1.127A(1997) : 1997 METHODS OF TESTING PLASTICS - THERMAL PROPERTIES - PLASTICS - THERMOGRAVIMETRY (TG) OF POLYMERS - GENERAL PRINCIPLES
15/30300051 DC : 0 BS EN 62788-1-4 ED 1.0 - MEASUREMENT PROCEDURES FOR MATERIALS USED IN PHOTOVOLTAIC MODULES - PART 1-4: ENCAPSULANTS - MEASUREMENT OF OPTICAL TRANSMITTANCE AND CALCULATION OF THE SOLAR-WEIGHTED PHOTON TRANSMITTANCE; YELLOWNESS INDEX AND UV CUT-OFF FREQUENCY
BS EN 14879-6:2009 Organic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media Combined linings with tile and brick layers
BS EN ISO 15015:2011 Plastics. Extruded sheets of impact-modified acrylonitrile-styrene copolymers (ABS, AEPDS and ASA). Requirements and test methods
BS EN 60455-2:2015 Resin based reactive compounds used for electrical insulation Methods of test
12/30238119 DC : 0 BS ISO 18937 - IMAGING MATERIALS - PHOTOGRAPHIC REFLECTION PRINTS - METHODS FOR MEASURING INDOOR LIGHT STABILITY
NFC 33 009-1 : 2008 ELECTRIC CABLES - ACCESSORIES - MATERIAL CHARACTERISATION - PART 1: FINGERPRINTING AND TYPE TESTS FOR RESINOUS COMPOUNDS
BS ISO 3341:2000 Textile glass. Yarns. Determination of breaking force and breaking elongation
BS 2782-1:Method 140C:1993 Methods of testing plastics. Thermal properties Determination of the combustibility of specimens using a 125 mm flame source
BS 2782-2.240A&B(1982) : LATEST METHODS OF TESTING PLASTICS - ELECTRICAL PROPERTIES - DETERMINATION OF LOSS TANGENT AND PERMITTIVITY AT POWER AND AUDIO FREQUENCIES
02/700016 DC : DRAFT JAN 2002 BS EN 14350-1 CHILD CARE ARTICLES - DRINKING EQUIPMENT - GENERAL AND MECHANICAL REQUIREMENTS AND TEST METHODS
BS ISO 1110 : 1995 AMD 10263 PLASTICS - POLYAMIDES - ACCELERATED CONDITIONING OF TEST SPECIMENS
BS ISO 18263-2:2015 Plastics. Mixtures of polypropylene (PP) and polyethylene (PE) recyclate derived from PP and PE used for flexible and rigid consumer packaging Preparation of test specimens and determination of properties
BS ISO 4604:2011 Reinforcement fabrics. Determination of conventional flexural stiffness. Fixed-angle flexometer method
BS EN ISO 13274:2013 Packaging. Transport packaging for dangerous goods. Plastics compatibility testing for packaging and IBCs
DIN EN ISO 30013:2012-03 Rubber and plastics hoses - Methods of exposure to laboratory light sources - Determination of changes in colour, appearance and other physical properties (ISO 30013:2011)
11/30211730 DC : 0 BS ISO 9352 - PLASTICS - DETERMINATION OF RESISTANCE TO WEAR BY ABRASIVE WHEELS
15/30316097 DC : DRAFT FEB 2015 BS EN 14903 - SURFACES FOR SPORTS AREAS - SYNTHETIC SURFACES FOR OUTDOOR SPORTS AREAS - DETERMINATION OF ROTATIONAL FRICTION
DIN EN ISO 1135-5 E : 2016 TRANSFUSION EQUIPMENT FOR MEDICAL USE - PART 5: TRANSFUSION SETS FOR SINGLE USE WITH PRESSURE INFUSION APPARATUS (ISO 1135-5:2015)
ONORM EN ISO 11343 : 2005 ADHESIVES - DETERMINATION OF DYNAMIC RESISTANCE TO CLEAVAGE OF HIGH-STRENGTH ADHESIVE BONDS UNDER IMPACT CONDITIONS - WEDGE IMPACT METHOD
BS 2782-3 Method 359:1984 Methods of testing plastics. Mechanical properties Determination of Charpy impact strength of rigid materials (Charpy impact flexural test)
BS 2782-10:Method 1008A:1996 Methods of testing plastics. Glass reinforced plastics General considerations and preparation of rods for determination of mechanical properties on rods made from roving-reinforced resins
14/30295038 DC : 0 BS ISO 19095-1 - ADHESIVES - EVALUATION OF THE ADHESION INTERFACE PERFORMANCE IN PLASTIC-METAL ASSEMBLIES - PART 1: GUIDELINES FOR THE APPROACH
UNE-EN ISO 16012:2016 Plastics - Determination of linear dimensions of test specimens (ISO 16012:2015)
BS EN ISO 11855-5:2015 Building environment design. Design, dimensioning, installation and control of embedded radiant heating and cooling systems Installation
BS ISO 2559:2011 Textile glass. Mats (made from chopped or continuous strands). Designation and basis for specifications
16/30337302 DC : 0 BS EN ISO 22007-4 - PLASTICS - DETERMINATION OF THERMAL CONDUCTIVITY AND THERMAL DIFFUSIVITY - PART 4: LASER FLASH METHOD
01/121538 DC : DRAFT APRIL 2001 BS EN ISO 899-1 PLASTICS - DETERMINATION OF CREEP BEHAVIOUR - PART 1: TENSILE CREEP
BS 2782-1 Method 141:1986 Methods of testing plastics. Thermal properties Determination of flammability by oxygen index
BS 2782-3.354A&B(1991) : 1991 AMD 8635 METHODS OF TESTING PLASTICS - MECHANICAL PROPERTIES - DETERMINATION OF TENSILE-IMPACT STRENGTH
06/30146370 DC : DRAFT SEP 2006 ISO 15439-1 - PLASTICS PIPING SYSTEMS FOR THE SUPPLY OF GASEOUS FUELS FOR MAXIMUM OPERATING PRESSURE UP TO AND INCLUDING 4 BAR - POLYAMIDE (PA) - PART 1: GENERAL
BS ISO 15310 : 1999 AMD 15944 REINFORCED PLASTICS - DETERMINATION OF THE IN-PLANE SHEAR MODULUS BY THE PLATE TWIST METHOD
13/30257969 DC : 0 BS ISO 17223 - PLASTICS - DETERMINATION OF YELLOWNESS INDEX AND CHANGE IN YELLOWNESS INDEX
BS 2782-3 Method 335A:1978 Methods of testing plastics. Mechanical properties Determination of flexural properties of rigid plastics
00/121497 DC : DRAFT APR 2000 ISO/CD 3597-2 - TEXTILE GLASS REINFORCED PLASTICS DETERMINATION OF MECHANICAL PROPERTIES ON RODS MADE OF ROVING-REINFORCED RESIN PART 2: DETERMINATION OF FLEXURAL STRENGTH
BS 2782-2.220&221(1983) : LATEST METHODS OF TESTING PLASTICS - ELECTRICAL PROPERTIES - DETERMINATION OF ELECTRICAL STRENGTH: RAPIDLY APPLIED VOLTAGE METHOD AND STEP-BY-STEP METHOD
BS EN 59:2016 Glass reinforced plastics. Determination of indentation hardness by means of a Barcol hardness tester
BS ISO 3672-2 : 2000 AMD 13326 PLASTICS - UNSATURATED-POLYESTER RESINS (UP-R) - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
BS ISO 10366-2 : 94 AMD 10665 PLASTICS - METHYL METHYLACRYLATE/ACRYLONITRILE/BUTADIENE/STYRENE (MABS) MOULDING AND EXTRUSION MATERIALS - PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
ISO 3342:2011 Textile glass Mats Determination of tensile breaking force
I.S. EN ISO 3219:1995 PLASTICS - POLYMERS/RESINS IN THE LIQUID STATE OR AS EMULSIONS OR DISPERSIONS - DETERMINATION OF VISCOSITY USING A ROTATIONAL VISCOMETER WITH DEFINED SHEAR RATE
UNE-EN ISO 11358-1:2015 Plastics - Thermogravimetry (TG) of polymers - Part 1: General principles (ISO 11358-1:2014)
BS 2782-5.532A(1997) : 1997 METHODS OF TESTING PLASTICS - OPTICAL AND COLOUR PROPERTIES, WEATHERING - PLASTICS - DETERMINATION OF THE TOTAL LUMINOUS TRANSMITTANCE OF TRANSPARENT MATERIALS - SINGLE-BEAM INSTRUMENT
CEI EN 62788-1-6 : 1ED 2017 MEASUREMENT PROCEDURES FOR MATERIALS USED IN PHOTOVOLTAIC MODULES - PART 1-6: ENCAPSULANTS - TEST METHODS FOR DETERMINING THE DEGREE OF CURE IN ETHYLENE-VINYL ACETATE
BS ISO 2580-2 : 94 AMD 10660 PLASTICS - ACRYLONITRILE/BUTADIENE/STYRENE (ABS) MOULDING AND EXTRUSION MATERIALS - PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
BS ISO 1163-2 : 1995 AMD 10744 PLASTICS - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) MOULDING AND EXTRUSION MATERIALS
10/30215313 DC : 0 BS ISO 18930 - IMAGING MATERIALS - PICTORIAL COLOUR REFLECTION PRINTS - METHODS FOR EVALUATING IMAGE STABILITY UNDER OUTDOOR CONDITIONS
08/30165044 DC : DRAFT FEB 2008 BS ISO 28078-2 - PLASTICS - POLY(PHENYLENE SULFIDE) (PPS) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
BS 7825-3.9:1998 Calibration of rubber and plastics test equipment. Calibration schedules Flammability characteristics
11/30238648 DC : DRAFT FEB 2011 BS EN 16240 - LIGHT TRANSMITTING FLAT SOLID POLYCARBONATE (PC) SHEETS FOR INTERNAL AND EXTERNAL ROOFS, WALLS AND CEILINGS - REQUIREMENTS AND TEST METHODS
BS ISO 13927 : 2001 AMD 14411 PLASTICS - SIMPLE HEAT RELEASE TEST USING A CONICAL RADIANT HEATER AND A THERMOPILE DETECTOR
ISO 20558-2:2018 Plastics — Poly(phenylene sulfide) (PPS) moulding and extrusion materials — Part 2: Preparation of test specimen and determination of properties
BS ISO 11359-1:2014 Plastics. Thermomechanical analysis (TMA) General principles
BS 2782-8.821A(1979) : 1979 AMD 13432 METHODS OF TESTING PLASTICS - OTHER PROPERTIES - DETERMINATION OF THE GAS TRANSMISSION RATE OF FILMS AND THIN SHEETS UNDER ATMOSPHERIC PRESSURE (MANOMETRIC METHOD)
INCITS/ISO/IEC 15457-3 : 2002 : R2007 IDENTIFICATION CARDS - THIN FLEXIBLE CARDS - PART 3: TEST METHODS
03/102086 DC : DRAFT JAN 2003 BS ISO 16241 - NOTCH TENSILE TEST TO MEASURE THE RESISTANCE TO SLOW CRACK GROWTH OF POLYETHYLENE MATERIALS FOR PIPES AND FITTING PRODUCTS (PENT)
EN 1264-4:2009 Water based surface embedded heating and cooling systems - Part 4: Installation
02/120706 DC : DRAFT FEB 2002 BS EN ISO 8256 - PLASTICS - DETERMINATION OF TENSILE-IMPACT STRENGTH
UNE-ISO 1926:2015 Rigid cellular plastics. Determination of tensile properties
UNE-EN ISO 22007-6:2015 Plastics - Determination of thermal conductivity and thermal diffusivity - Part 6: Comparative method for low thermal conductivities using a temperature-modulation technique (ISO 22007-6:2014)
DIN EN 16153:2015-05 LIGHT TRANSMITTING FLAT MULTIWALL POLYCARBONATE (PC) SHEETS FOR INTERNAL AND EXTERNAL USE IN ROOFS, WALLS AND CEILINGS - REQUIREMENTS AND TEST METHODS
DIN ISO 16486-3 E : 2015 PLASTICS PIPING SYSTEMS FOR THE SUPPLY OF GASEOUS FUELS - UNPLASTICIZED POLYAMIDE (PA-U) PIPING SYSTEMS WITH FUSION JOINTING AND MECHANICAL JOINTING - PART 3: FITTINGS (ISO 16486-3:2012 + AMD 1:2014)
DIN ISO 16486-1 E : 2015 PLASTICS PIPING SYSTEMS FOR THE SUPPLY OF GASEOUS FUELS - UNPLASTICIZED POLYAMIDE (PA-U) PIPING SYSTEMS WITH FUSION JOINTING AND MECHANICAL JOINTING - PART 1: GENERAL (ISO 16486-1:2012 + AMD 1:2014)
ISO 11528:2016 Buildings and civil engineering works Sealants Determination of crazing and cracking following exposure to artificial or natural weathering
ISO 13468-1:1996 Plastics Determination of the total luminous transmittance of transparent materials Part 1: Single-beam instrument
UNE-EN 16776:2016 Resilient floor coverings - Heterogeneous polyurethane floor coverings - Specification
DIN EN ISO 1183-1:2013-04 PLASTICS - METHODS FOR DETERMINING THE DENSITY OF NON-CELLULAR PLASTICS - PART 1: IMMERSION METHOD, LIQUID PYKNOMETER METHOD AND TITRATION METHOD (ISO 1183-1:2012)
EN 438-2:2016 High-pressure decorative laminates (HPL) - Sheets based on thermosetting resins (usually called laminates) - Part 2: Determination of properties
BS 2782-3.360A(1991) : 1991 AMD 15285 METHODS OF TESTING PLASTICS - MECHANICAL PROPERTIES - DETERMINATION OF TEAR RESISTANCE OF PLASTICS FILM AND SHEETING BY THE ELMENDORF METHOD
BS ISO 15509:2001 Adhesives. Determination of the bond strength of engineering-plastic joints
HD 631.1 : 200S2 ELECTRIC CABLES - ACCESSORIES - MATERIAL CHARACTERISATION - PART 1: FINGERPRINTING AND TYPE TESTS FOR RESINOUS COMPOUNDS
ISO 15686-2:2012 Buildings and constructed assets — Service life planning — Part 2: Service life prediction procedures
I.S. EN ISO 877-1:2010 PLASTICS - METHODS OF EXPOSURE TO SOLAR RADIATION - PART 1: GENERAL GUIDANCE
ISO 17541:2014 Plastics Quantitative evaluation of scratch-induced damage and scratch visibility
IEC 62899-202:2016 Printed electronics - Part 202: Materials - Conductive ink
ISO 2896:2001 Rigid cellular plastics Determination of water absorption
ISO 12856-1:2014 Plastics Plastic railway sleepers for railway applications (railroad ties) Part 1: Material characteristics
ASTM G 147 : 2017 : REDLINE Standard Practice for Conditioning and Handling of Nonmetallic Materials for Natural and Artificial Weathering Tests
I.S. EN ISO 30013:2011 RUBBER AND PLASTICS HOSES - METHODS OF EXPOSURE TO LABORATORY LIGHT SOURCES - DETERMINATION OF CHANGES IN COLOUR, APPEARANCE AND OTHER PHYSICAL PROPERTIES (ISO 30013:2011)
I.S. EN ISO 472:2013 PLASTICS - VOCABULARY (ISO 472:2013)
I.S. EN 60455-2:2015 RESIN BASED REACTIVE COMPOUNDS USED FOR ELECTRICAL INSULATION - PART 2: METHODS OF TEST
BS EN 13121-3:2016 GRP tanks and vessels for use above ground Design and workmanship
I.S. EN 15860:2010 PLASTICS - THERMOPLASTIC SEMI-FINISHED PRODUCTS FOR MACHINING - REQUIREMENTS AND TEST METHODS
I.S. EN ISO 29664:2017 PLASTICS - ARTIFICIAL WEATHERING INCLUDING ACIDIC DEPOSITION (ISO 29664:2010)
I.S. EN ISO 15015:2011 PLASTICS - EXTRUDED SHEETS OF IMPACT-MODIFIED ACRYLONITRILE-STYRENE COPOLYMERS (ABS, AEPDS AND ASA) - REQUIREMENTS AND TEST METHODS
EN ISO 1183-2:2004 PLASTICS - METHODS FOR DETERMINING THE DENSITY OF NON-CELLULAR PLASTICS - PART 2: DENSITY GRADIENT COLUMN METHOD
I.S. EN 15870:2009 ADHESIVES - DETERMINATION OF TENSILE STRENGTH OF BUTT JOINTS
ISO 11357-3:2018 Plastics — Differential scanning calorimetry (DSC) — Part 3: Determination of temperature and enthalpy of melting and crystallization
ISO 15314:2004 Plastics Methods for marine exposure
UNE-EN ISO 29664:2017 Plastics - Artificial weathering including acidic deposition (ISO 29664:2010)
I.S. EN 16245-2:2013 FIBRE-REINFORCED PLASTIC COMPOSITES - DECLARATION OF RAW MATERIAL CHARACTERISTICS - PART 2: SPECIFIC REQUIREMENTS FOR RESIN, CURING SYSTEMS, ADDITIVES AND MODIFIERS
ISO 18944:2014 Imaging materials Reflection colour photographic prints Test print construction and measurement
BS 2782-5 Method 550A:1981 Methods of testing plastics. Optical and colour properties, weathering Methods of exposure to natural weathering
EN ISO 6721-1:2011 Plastics - Determination of dynamic mechanical properties - Part 1: General principles (ISO 6721-1:2011)
I.S. EN IEC 62631-2-1:2018 DIELECTRIC AND RESISTIVE PROPERTIES OF SOLID INSULATING MATERIALS - PART 2-1: RELATIVE PERMITTIVITY AND DISSIPATION FACTOR - TECHNICAL FREQUENCIES (0,1 HZ TO 10 MHZ) - AC METHODS
I.S. EN 15836-1:2010 PLASTICS - PLASTICIZED POLY(VINYL CHLORIDE) (PVC-P) MEMBRANES FOR INGROUND SWIMMING POOLS - PART 1: HOMOGENOUS MEMBRANES OF NOMINAL THICKNESS EQUAL TO OR GREATER THAN 0,75 MM
ASTM D 5938 : 1996 Standard Test Method for Determination of Tensile Properties (Withdrawn 1998)
ISO 4578:1997 Adhesives — Determination of peel resistance of high-strength adhesive bonds — Floating-roller method
BS ISO 3342:2011 Textile glass. Mats. Determination of tensile breaking force
EN 17098-2:2018 Plastics - Barrier films for agricultural and horticultural soil disinfection by fumigation - Part 2: Method for film permeability determination using a static technique
UNE-EN 13121-3:2017 GRP tanks and vessels for use above ground - Part 3: Design and workmanship
ISO 10406-1:2015 Fibre-reinforced polymer (FRP) reinforcement of concrete — Test methods — Part 1: FRP bars and grids
EN 17098-1:2018 Plastics - Barrier films for agricultural and horticultural soil disinfection by fumigation - Part 1: Specifications for barrier films
EN ISO 1183-1:2012 Plastics - Methods for determining the density of non-cellular plastics - Part 1: Immersion method, liquid pyknometer method and titration method (ISO 1183-1:2012)
EN ISO 4612:1999 PLASTICS - PREPARATION OF PVC PASTES FOR TEST PURPOSES - PLANETARY-MIXER METHOD
EN ISO 7391-2:2006 Plastics - Polycarbonate (PC) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 7391-2:2006)
ISO 1210:1992 Plastics — Determination of the burning behaviour of horizontal and vertical specimens in contact with a small-flame ignition source
ISO 4587:2003 Adhesives Determination of tensile lap-shear strength of rigid-to-rigid bonded assemblies
ISO 21367:2007 Plastics — Reaction to fire — Test method for flame spread and combustion product release from vertically oriented specimens
ISO 8605:2001 Textile-glass-reinforced plastics — Sheet moulding compound (SMC) — Basis for a specification
ISO/TR 5659-3:1999 Plastics Smoke generation Part 3: Determination of optical density by a dynamic-flow method
EN ISO 846 : 1997 PLASTICS - EVALUATION OF THE ACTION OF MICROORGANISMS
ISO 871:2006 Plastics Determination of ignition temperature using a hot-air furnace
ISO 10406-2:2015 Fibre-reinforced polymer (FRP) reinforcement of concrete — Test methods — Part 2: FRP sheets
ISO 17557:2003 Plastics — Film and sheeting — Cast polypropylene (PP) films
I.S. EN ISO 8986-2:2009 PLASTICS - POLYBUTENE-1 (PB-1) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
I.S. EN 60464-2:2002 VARNISHES USED FOR ELECTRICAL INSULATION - PART 2: METHODS OF TEST
ISO 22621-3:2007 Plastics piping systems for the supply of gaseous fuels for maximum operating pressures up to and including 2 MPa (20 bar) Polyamide (PA) Part 3: Fittings
ISO 5657:1997 Reaction to fire tests Ignitability of building products using a radiant heat source
ISO 4606:1995 Textile glass Woven fabric Determination of tensile breaking force and elongation at break by the strip method
ONORM EN ISO 527-1 : 2012 PLASTICS - DETERMINATION OF TENSILE PROPERTIES - PART 1: GENERAL PRINCIPLES (ISO 527-1:2012)
UNE-EN 15860:2011 Plastics - Thermoplastic semi-finished products for machining - Requirements and test methods
I.S. EN 59:2016 GLASS REINFORCED PLASTICS - DETERMINATION OF INDENTATION HARDNES BY MEANS OF A BARCOL HARDNESS TESTER
EN ISO 14125:1998/A1:2011 FIBRE-REINFORCED PLASTIC COMPOSITES - DETERMINATION OF FLEXURAL PROPERTIES
IEC 62631-2-1:2018 Dielectric and resistive properties of solid insulating materials - Part 2-1: Relative permittivity and dissipation factor - Technical Frequencies (0,1 Hz - 10 MHz) - AC Methods
I.S. EN ISO 4612:1999 PLASTICS - PREPARATION OF PVC PASTES FOR TEST PURPOSES - PLANETARY-MIXER METHOD
DIN EN 14879-2 E : 2007 ORGANIC COATING SYSTEMS AND LININGS FOR PROTECTION OF INDUSTRIAL APPARATUS AND PLANTS AGAINST CORROSION CAUSED BY AGGRESSIVE MEDIA - PART 2: COATINGS ON METALLIC COMPONENTS
DIN EN ISO 22088-4:2006-11 Plastics - Determination of resistance to environmental stress cracking (ESC) - Part 4: Ball or pin impression method (ISO 22088-4:2006)
DIN EN 12586:2011-04 Child use and care articles - Soother holder - Safety requirements and test methods (includes Amendment A1:2011)
EN 60695-2-13:2010/A1:2014 FIRE HAZARD TESTING - PART 2-13: GLOWING/HOT-WIRE BASED TEST METHODS - GLOW-WIRE IGNITION TEMPERATURE (GWIT) TEST METHOD FOR MATERIALS (IEC 60695-2-13:2010/A1:2014)
DIN EN 1966:2009-07 STRUCTURAL ADHESIVES - CHARACTERIZATION OF A SURFACE BY MEASURING ADHESION BY MEANS OF THE THREE POINT BENDING METHOD
DIN EN ISO 13468-2:2006-07 Plastics - Determination of the total luminous transmittance of transparent materials - Part 2: Double-beam instrument (ISO 13468-2:1999)
DIN EN ISO 3672-2 E : 2002 PLASTICS - UNSATURATED-POLYESTER RESINS (UP-R) - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
DIN EN 14879-3 E : 2007 ORGANIC COATING SYSTEMS AND LININGS FOR PROTECTION OF INDUSTRIAL APPARATUS AND PLANTS AGAINST CORROSION CAUSED BY AGGRESSIVE MEDIA - PART 3: COATINGS ON CONCRETE COMPONENTS
DIN EN ISO 4589-2 E : 2017 PLASTICS - DETERMINATION OF BURNING BEHAVIOUR BY OXYGEN INDEX - PART 2: AMBIENT-TEMPERATURE TEST (ISO 4589-2:2017)
DIN EN ISO 604 E : 2003 PLASTICS - DETERMINATION OF COMPRESSIVE PROPERTIES
DIN EN ISO 177 E : 2017 PLASTICS - DETERMINATION OF MIGRATION OF PLASTICIZERS (ISO 177:2016)
DIN EN ISO 176 E : 2005 PLASTICS - DETERMINATION OF LOSS OF PLASTICIZERS - ACTIVATED CARBON METHOD
DIN EN 14869-2 E : 2011 STRUCTURAL ADHESIVES - DETERMINATION OF SHEAR BEHAVIOUR OF STRUCTURAL BONDS - PART 2: THICK ADHERENDS SHEAR TEST
DIN EN ISO 9163 E : 2005 TEXTILE GLASS - ROVINGS - MANUFACTURE OF TEST SPECIMENS AND DETERMINATION OF TENSILE STRENGTH OF IMPREGNATED ROVINGS
DIN EN ISO 8256:2005-05 Plastics - Determination of tensile-impact strength (ISO 8256:2004); German version EN ISO 8256:2004
DIN EN ISO 1889:2009-10 REINFORCEMENT YARNS - DETERMINATION OF LINEAR DENSITY
DIN EN ISO 13927:2015-08 Plastics - Simple heat release test using a conical radiant heater and a thermopile detector (ISO 13927:2015)
DIN EN 1264-4:2009-11 Water based surface embedded heating and cooling systems - Part 4: Installation
DIN EN ISO 845 E : 2009 CELLULAR PLASTICS AND RUBBERS - DETERMINATION OF APPARENT DENSITY
DIN EN ISO 483 E : 2006 PLASTICS - SMALL ENCLOSURES FOR CONDITIONING AND TESTING USING AQUEOUS SOLUTIONS TO MAINTAIN THE HUMIDITY AT A CONSTANT VALUE
DIN EN 14447 E : 2005 FIBRE REINFORCED PLASTICS - GLASS MAT REINFORCED THERMOPLASTICS (GMT) - DETERMINATION OF FLOWABILITY AND SOLIDIFICATION
DIN EN ISO 11403-3:2014-09 Plastics - Acquisition and presentation of comparable multipoint data - Part 3: Environmental influences on properties (ISO 11403-3:2014)
DIN EN ISO 1890:2009-10 REINFORCEMENT YARNS - DETERMINATION OF TWIST
BS EN 14869-1:2011 Structural adhesives. Determination of shear behaviour of structural bonds Torsion test method using butt-bonded hollow cylinders
ISO 8580:1987 Rubber and plastics hoses Determination of ultra-violet resistance under static conditions
UNE-EN ISO 306:2015 Plastics - Thermoplastic materials - Determination of Vicat softening temperature (VST) (ISO 306:2013)
BS EN ISO 12086-2:2006 Plastics. Fluoropolymer dispersions and moulding and extrusion materials Preparation of test specimens and determination of properties
ISO 1135-5:2015 Transfusion equipment for medical use — Part 5: Transfusion sets for single use with pressure infusion apparatus
UNE-EN ISO 75-1:2013 Plastics - Determination of temperature of deflection under load - Part 1: General test method (ISO 75-1:2013)
ISO 13274:2013 Packaging — Transport packaging for dangerous goods — Plastics compatibility testing for packaging and IBCs
ISO 11468:1997 Plastics — Preparation of PVC pastes for test purposes — Dissolver method
DIN EN ISO 180:2013-08 PLASTICS - DETERMINATION OF IZOD IMPACT STRENGTH (ISO 180:2000 + AMD.1:2006 + AMD.2:2013)
UNI EN ISO 8536-4 : 2013 INFUSION EQUIPMENT FOR MEDICAL USE - PART 4: INFUSION SETS FOR SINGLE USE, GRAVITY FEED
BS EN ISO 6603-1:2000 Plastics. Determination of multi-axial impact behaviour of rigid plastics Non-instrumented impact testing
BS EN ISO 8256:2004 Plastics. Determination of tensile-impact strength
BS EN ISO 75-1:2013 Plastics. Determination of temperature of deflection under load General test method
BS EN 13592:2017 Plastics sacks for household waste collection. Types, requirements and test methods
IEC 60216-8:2013 Electrical insulating materials - Thermal endurance properties - Part 8: Instructions for calculating thermal endurance characteristics using simplified procedures
ISO 14125:1998 Fibre-reinforced plastic composites Determination of flexural properties
BS EN 13421:2006 Plastics. Thermoset moulding compounds. Composites and reinforcement fibres. Preparation of specimens for determining the anisotropy of the properties of compression moulding composites
ISO 13445:2003 Adhesives Determination of shear strength of adhesive bonds between rigid substrates by the block-shear method
12/30260914 DC : 0 BS EN 4718 - AEROSPACE SERIES - POLYETHERKETONE WITH 55% CONTINUOUS GLASS FIBRE BY VOLUME (PEEK-GF55)
PD IEC/TS 62788-2:2017 Measurement procedures for materials used in photovoltaic modules Polymeric materials. Frontsheets and backsheets
BS EN ISO 1135-4:2015 Transfusion equipment for medical use Transfusion sets for single use, gravity feed
BS EN 1389:2003 Advanced technical ceramics. Ceramic composites. Physical properties. Determination of density and apparent porosity
ISO 1163-2:1995 Plastics Unplasticized poly(vinyl chloride) (PVC-U) moulding and extrusion materials Part 2: Preparation of test specimens and determination of properties
BS EN ISO 176:2005 Plastics. Determination of loss of plasticizers. Activated carbon method
BS EN ISO 6383-2:2004 Plastics. Film and sheeting. Determination of tear resistance Elmendorf method
UNE-EN ISO 11403-2:2012 Plastics - Acquisition and presentation of comparable multipoint data - Part 2: Thermal and processing properties (ISO 11403-2:2012)
BS EN 15336:2007 Adhesives. Determination of the time to rupture of bonded joints under static load
BS EN ISO 11403-2:2012 Plastics. Acquisition and presentation of comparable multipoint data Thermal and processing properties
IEC 60695-2-13:2010+AMD1:2014 CSV Fire hazard testing - Part 2-13: Glowing/hot-wire based test methods- Glow-wire ignition temperature (GWIT) test method for materials
ISO 2898-2:2008 Plastics Plasticized poly(vinyl chloride) (PVC-P) moulding and extrusion materials Part 2: Preparation of test specimens and determination of properties
ISO 877:1994 Plastics Methods of exposure to direct weathering, to weathering using glass-filtered daylight, and to intensified weathering by daylight using Fresnel mirrors
UNE-EN ISO 11833-1:2012 Plastics - Unplasticized poly(vinyl chloride) sheets - Types, dimensions and characteristics - Part 1: Sheets of thickness not less than 1 mm (ISO 11833-1:2012)
BS EN 1264-4:2009 Water based surface embedded heating and cooling systems Installation
BS EN ISO 10350-2:2011 Plastics. Acquisition and presentation of comparable single-point data Long-fibre-reinforced plastics
ISO 868:2003 Plastics and ebonite — Determination of indentation hardness by means of a durometer (Shore hardness)
UNI EN ISO 180 : 2013 PLASTICS - DETERMINATION OF IZOD IMPACT STRENGTH
EN ISO 10350-2:2011 Plastics - Acquisition and presentation of comparable single-point data - Part 2: Long-fibre-reinforced plastics (ISO 10350-2:2011)
UNI EN ISO 10350-2 : 2011 PLASTICS - ACQUISITION AND PRESENTATION OF COMPARABLE SINGLE-POINT DATA - PART 2: LONG-FIBRE-REINFORCED PLASTICS
UNI EN ISO 10352 : 2011 FIBRE-REINFORCED PLASTICS - MOULDING COMPOUNDS AND PREPREGS - DETERMINATION OF MASS PER UNIT AREA
I.S. EN ISO 10352:2010 FIBRE-REINFORCED PLASTICS - MOULDING COMPOUNDS AND PREPREGS - DETERMINATION OF MASS PER UNIT AREA
UNI EN ISO 75-1 : 2013 PLASTICS - DETERMINATION OF TEMPERATURE OF DEFLECTION UNDER LOAD - PART 1: GENERAL TEST METHOD
UNE-EN ISO 11963:2013 Plastics - Polycarbonate sheets - Types, dimensions and characteristics (ISO 11963:2012)
EN ISO 10352:2010 Fibre-reinforced plastics - Moulding compounds and prepregs - Determination of mass per unit area (ISO 10352:2010)
UNE-EN ISO 1874-2:2013 Plastics - Polyamide (PA) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 1874-2:2012)
ONORM EN ISO 10350-2 : 2011 PLASTICS - ACQUISITION AND PRESENTATION OF COMPARABLE SINGLE-POINT DATA - PART 2: LONG-FIBRE-REINFORCED PLASTICS
EN ISO 14663-2:2006 Plastics - Ethylene/vinyl alcohol (EVOH) copolymer moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 14663-2:1999)
I.S. EN ISO 10350-2:2011 PLASTICS - ACQUISITION AND PRESENTATION OF COMPARABLE SINGLE-POINT DATA - PART 2: LONG-FIBRE-REINFORCED PLASTICS
EN ISO 1890:2009 Reinforcement yarns - Determination of twist (ISO 1890:2009)
EN ISO 29664:2017 Plastics - Artificial weathering including acidic deposition (ISO 29664:2010)
EN ISO 9988-2:2015 Plastics - Polyoxymethylene (POM) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 9988-2:2006)
EN 14118-3:2003 Reinforcement - Specifications for textile glass mats (chopped strand and continuous filament mats) - Part 3: Specific requirements
EN ISO 21509:2015 Plastics and ebonite - Verification of Shore durometers (ISO 21509:2006)
EN 16245-2:2013 Fibre-reinforced plastic composites - Declaration of raw material characteristics - Part 2: Specific requirements for resin, curing systems, additives and modifiers
EN ISO 2039-1 : 2003 PLASTICS - DETERMINATION OF HARDNESS - PART 1: BALL INDENTATION METHOD (ISO 2039-1:2001)
EN 15836-1:2010 Plastics - Plasticized poly(vinyl chloride) (PVC-P) membranes for inground swimming pools - Part 1: Homogenous membranes of nominal thickness equal to or greater than 0,75 mm
UNI EN ISO 14125 : 2011 FIBRE-REINFORCED PLASTIC COMPOSITES - DETERMINATION OF FLEXURAL PROPERTIES
UNI EN ISO 1874-2 : 2013 PLASTICS - POLYAMIDE (PA) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
ONORM EN ISO 11339 : 2010 ADHESIVES - T-PEEL TEST FOR FLEXIBLE-TO-FLEXIBLE BONDED ASSEMBLIES
BS EN ISO 177:2017 Plastics. Determination of migration of plasticizers
UNI EN 1465 : 2009 ADHESIVES - DETERMINATION OF TENSILE LAP-SHEAR STRENGTH BONDED ASSEMBLIES
UNI EN 14869-2 : 2011 STRUCTURAL ADHESIVES - DETERMINATION OF SHEAR BEHAVIOUR OF STRUCTURAL BONDS - PART 2: THICK ADHERENDS SHEAR TEST
UNI EN 14869-1 : 2011 STRUCTURAL ADHESIVES - DETERMINATION OF SHEAR BEHAVIOUR OF STRUCTURAL BONDS - PART 1: TORSION TEST METHOD USING BUTT-BONDED HOLLOW CYLINDERS
I.S. EN ISO 3146:2000 PLASTICS - DETERMINATION OF MELTING BEHAVIOUR (MELTING TEMPERATURE OR MELTING RANGE) OF SEMI-CRYSTALLINE POLYMERS BY CAPILLARY TUBE AND POLARIZING-MICROSCOPE METHODS
UNI EN ISO 11403-2 : 2012 PLASTICS - ACQUISITION AND PRESENTATION OF COMPARABLE MULTIPOINT DATA - PART 2: THERMAL AND PROCESSING PROPERTIES
UNI EN 16245-2 : 2013 FIBRE-REINFORCED PLASTIC COMPOSITES - DECLARATION OF RAW MATERIAL CHARACTERISTICS - PART 2: SPECIFIC REQUIREMENTS FOR RESIN, CURING SYSTEMS, ADDITIVES AND MODIFIERS
ONORM EN ISO 11358-1 : 2014 PLASTICS - THERMOGRAVIMETRY (TG) OF POLYMERS - PART 1: GENERAL PRINCIPLES (ISO 11358-1:2014)
UNI EN ISO 11963 : 2013 PLASTICS - POLYCARBONATE SHEETS - TYPES, DIMENSIONS AND CHARACTERISTICS
UNI EN 28510-1 : 2014 ADHESIVES - PEEL TEST FOR A FLEXIBLE-BONDED-TO-RIGID TEST SPECIMEN ASSEMBLY - PART 1: 90 DEGREES PEEL
UNI EN ISO 7792-2 : 2013 PLASTICS - THERMOPLASTIC POLYESTER (TP) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
UNI EN ISO 2898-2 : 2009 PLASTICS - PLASTICIZED POLY(VINYL CHLORIDE) (PVC-P) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
I.S. EN ISO 14125:1998 FIBRE-REINFORCED PLASTIC COMPOSITES - DETERMINATION OF FLEXURAL PROPERTIES
I.S. EN ISO 9773:1998 PLASTICS - DETERMINATION OF BURNING BEHAVIOUR OF THIN FLEXIBLE VERTICAL SPECIMENS IN CONTACT WITH A SMALL-FLAME IGNITION SOURCE
UNI EN ISO 1890 : 2009 REINFORCEMENT YARNS - DETERMINATION OF TWIST
I.S. EN ISO 14126:2000 FIBRE-REINFORCED PLASTIC COMPOSITES - DETERMINATION OF COMPRESSIVE PROPERTIES IN THE IN-PLANE DIRECTION
UNI EN ISO 4651 : 2009 CELLULAR RUBBERS AND PLASTICS - DETERMINATION OF DYNAMIC CUSHIONING PERFORMANCE
BS 2782-3.335A(1993) : AMD 8638 METHODS OF TESTING PLASTICS - MECHANICAL PROPERTIES - DETERMINATION OF FLEXURAL PROPERTIES
UNI EN 12586 : 2011 CHILD USE AND CARE ARTICLES - SOOTHER HOLDER - SAFETY REQUIREMENTS AND TEST METHODS
UNI EN ISO 604 : 2008 PLASTICS - DETERMINATION OF COMPRESSIVE PROPERTIES
UNI EN ISO 175 : 2010 PLASTICS - METHODS OF TEST FOR THE DETERMINATION OF THE EFFECTS OF IMMERSION IN LIQUID CHEMICALS
UNI EN ISO 306 : 2014 PLASTICS - THERMOPLASTIC MATERIALS - DETERMINATION OF VICAT SOFTENING TEMPERATURE (VST)
UNI EN ISO 527-1 : 2012 PLASTICS - DETERMINATION OF TENSILE PROPERTIES - PART 1: GENERAL PRINCIPLES
UNI EN ISO 1889 : 2009 REINFORCEMENT YARNS - DETERMINATION OF LINEAR DENSITY
UNI EN 1965-2 : 2011 STRUCTURAL ADHESIVES - CORROSION - PART 2: DETERMINATION AND CLASSIFICATION OF CORROSION TO A BRASS SUBSTRATE
UNI EN 1966 : 2009 STRUCTURAL ADHESIVES - CHARACTERIZATION OF A SURFACE BY MEASURING ADHESION BY MEANS OF THE THREE POINT BENDING METHOD
UNI EN ISO 8986-2 : 2010 PLASTICS - POLYBUTENE-1 (PB-1) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
UNI EN 14879-6 : 2010 ORGANIC COATING SYSTEMS AND LININGS FOR PROTECTION OF INDUSTRIAL APPARATUS AND PLANTS AGAINST CORROSION CAUSED BY AGGRESSIVE MEDIA - PART 6: COMBINED LININGS WITH TILE AND BRICK LAYERS
UNI EN ISO 179-1 : 2010 PLASTICS - DETERMINATION OF CHARPY IMPACT PROPERTIES - PART 1: NON-INSTRUMENTED IMPACT TEST
UNI EN ISO 845 : 2009 CELLULAR PLASTICS AND RUBBERS - DETERMINATION OF APPARENT DENSITY
BS 1755-1:1982 Glossary of terms used in the plastics industry Polymer and plastics technology
UNI EN 1464 : 2010 ADHESIVES - DETERMINATION OF PEEL RESISTANCE OF ADHESIVE BONDS - FLOATING ROLLER METHOD
UNI EN ISO 12086-2 : 2006 PLASTICS - FLUOROPOLYMER DISPERSIONS AND MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
DIN EN ISO 20028-2 E : 2017 PLASTICS - THERMOPLASTIC POLYESTER (TP) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES (ISO 20028-2:2017)
ISO 3597-1:2003 Textile-glass-reinforced plastics Determination of mechanical properties on rods made of roving-reinforced resin Part 1: General considerations and preparation of rods
NF EN ISO 178 : 2011 AMD 1 2013 PLASTICS - DETERMINATION OF FLEXURAL PROPERTIES
AFAP-5 : 2010 NATO REACTION-TO-FIRE TESTS FOR MATERIALS - HEAT RELEASE RATE
BS 2782-1:Method 140A:1992 Methods of testing plastics. Thermal properties Determination of the burning behaviour of horizontal and vertical specimens in contact with a small-flame ignition source
DIN EN 15836-2:2010-11 Plastics - Plasticized poly(vinyl chloride) (PVC-P) membranes for inground swimming pools - Part 2: Reinforced membranes of nominal thickness equal to or greater than 1,5 mm
UNI EN ISO 1183-1 : 2013 PLASTICS - METHODS FOR DETERMINING THE DENSITY OF NON-CELLULAR PLASTICS - PART 1: IMMERSION METHOD, LIQUID PYKNOMETER METHOD AND TITRATION METHOD
ISO 2113:1996 Reinforcement fibres — Woven fabrics — Basis for a specification
BS ISO 19095-1:2015 Plastics. Evaluation of the adhesion interface performance in plastic-metal assemblies Guidelines for the approach
DD IEC/TS 60695-2-20:2004 Fire hazard testing Glowing/hot wire based test methods - Hot-wire coil ignitability. Apparatus, test method and guidance
IEC 62899-402-1:2017 Printed electronics - Part 402-1: Printability - Measurement of qualities - Pattern width
BS ISO 3374:2000 Reinforcement products. Mats and fabrics. Determination of mass per unit area
BS 2782-8.832A(1991) : 1991 AMD 9463 METHODS OF TESTING PLASTICS - OTHER PROPERTIES - DETERMINATION OF RESISTANCE TO ENVIRONMENTAL STRESS CRACKING (ESC) BY THE BENT STRIP METHOD
ISO 178:2010 Plastics Determination of flexural properties
96/125176 DC : DRAFT SEP 96 ISO/CD 15024 DETERMINATION OF THE MODE 1 DELAMINATION RESISTANCE (CRITICAL STRAIN ENERGY RELEASE RATE OR FRACTURE TOUGHNESS G[LC]) OF UNIDIRECTIONAL FIBRE-REINFORCED POLYMER LAMINATES USING THE DOUBLE CANTILEVER BEAM (DCB) SPECIMEN
BS ISO 11566:1996 Carbon fibre. Determination of the tensile properties of single-filament specimens
14/30303794 DC : 0 BS EN 438-2 - HIGH-PRESSURE DECORATIVE LAMINATES (HPL) - SHEETS BASED ON THERMOSETTING RESINS (USUALLY CALLED LAMINATES) - PART 2: DETERMINATION OF PROPERTIES
13/30279113 DC : 0 BS ISO 16012 - PLASTICS - DETERMINATION OF LINEAR DIMENSIONS OF TEST SPECIMENS
BS ISO 17557:2003 Plastics. Film and sheeting. Cast polypropylene (PP) films
11/30248330 DC : 0 BS ISO 17467-1 - PLASTICS PIPING SYSTEMS FOR THE SUPPLY OF GASEOUS FUELS - UNPLASTICIZED POLYAMIDE (PA-U) PIPING SYSTEMS JOINTED BY SOLVENT CEMENT - PART 1: GENERAL
DIN EN 14879-6 E : 2010 ORGANIC COATING SYSTEMS AND LININGS FOR PROTECTION OF INDUSTRIAL APPARATUS AND PLANTS AGAINST CORROSION CAUSED BY AGGRESSIVE MEDIA - PART 6: COMBINED LININGS WITH TILE AND BRICK LAYERS
08/30184486 DC : DRAFT JUNE 2008 BS EN ISO 1135-4 - TRANSFUSION EQUIPMENT FOR MEDICAL USE - PART 4: TRANSFUSION SETS FOR SINGLE USE
DIN ISO 18352 E : 2017 CARBON-FIBRE-REINFORCED PLASTICS - DETERMINATION OF COMPRESSION-AFTER-IMPACT PROPERTIES AT A SPECIFIED IMPACT-ENERGY LEVEL (ISO 18352:2009)
BS EN 15466-3:2009 Primers for cold and hot applied joint sealants Determination of solids content and evaporation behaviour of volatiles
09/30206609 DC : 0 BS EN 60695-11-10 ED.2 - FIRE HAZARD TESTING - PART 11-10: TEST FLAMES - 50 W HORIZONTAL AND VERTICAL FLAME TEST METHODS
I.S. EN ISO 23667:2007 PACKAGING - TRANSPORT PACKAGING FOR DANGEROUS GOODS - RIGID PLASTICS AND PLASTICS COMPOSITE IBCS - COMPATIBILITY TESTING
BS ISO 16616:2015 Test methods for natural fibre-reinforced plastic composite (NFC) deck boards
12/30254141 DC : 0 BS EN 15651-4 - SEALANTS FOR NON-STRUCTURAL USE IN JOINTS IN BUILDINGS AND PEDESTRIAN WALKWAYS - PART 4: SEALANTS FOR PEDESTRIAN WALKWAYS
DIN EN ISO 1135-3:2014-12 (Draft) TRANSFUSION EQUIPMENT FOR MEDICAL USE - PART 3: BLOOD-TAKING SETS FOR SINGLE USE (ISO 1135-3:2016)
BS EN ISO 11358-1:2014 Plastics. Thermogravimetry (TG) of polymers General principles
DIN EN 16245-5:2013-08 Fibre-reinforced plastic composites - Declaration of raw material characteristics - Part 5: Specific requirements for core materials
UNI EN 15836-1 : 2010 PLASTICS - PLASTICIZED POLY(VINYL CHLORIDE) (PVC-P) MEMBRANES FOR INGROUND SWIMMING POOLS - PART 1: HOMOGENOUS MEMBRANES OF NOMINAL THICKNESS EQUAL TO OR GREATER THAN 0,75 MM
PD 6577:1995 The influence of environmental conditions on the testing of textile materials
UNI EN ISO 30013 : 2011 RUBBER AND PLASTICS HOSES - METHODS OF EXPOSURE TO LABORATORY LIGHT SOURCES - DETERMINATION OF CHANGES IN COLOUR, APPEARANCE AND OTHER PHYSICAL PROPERTIES
02/121868 DC : DRAFT APR 2002 BS ISO 15314 - PLASTICS - METHODS FOR MARINE EXPOSURE
ISO 18941:2017 Imaging materials Colour reflection prints Test method for ozone gas fading stability
DIN ISO 16486-2 E : 2015 PLASTICS PIPING SYSTEMS FOR THE SUPPLY OF GASEOUS FUELS - UNPLASTICIZED POLYAMIDE (PA-U) PIPING SYSTEMS WITH FUSION JOINTING AND MECHANICAL JOINTING - PART 2: PIPES (ISO 16486-2:2012 + AMD 1:2014)
16/30353140 DC : 0 PD IEC/TS 62788-7-2 ED 1.0 - MEASUREMENT PROCEDURES FOR MATERIALS USED IN PHOTOVOLTAIC MODULES - PART 7-2: ENVIRONMENTAL EXPOSURES - ACCELERATED WEATHERING TESTS OF POLYMERIC MATERIALS
PREN 59 : DRAFT 2014 GLASS REINFORCED PLASTICS - MEASUREMENT OF HARDNESS BY MEANS OF A BARCOL IMPRESSOR
BS EN 15836-1:2010 Plastics. Plasticized poly(vinyl chloride) (PVC-P) membranes for inground swimming pools Homogenous membranes of nominal thickness equal to or greater than 0,75 mm
I.S. EN ISO 9653:2000 ADHESIVES - TEST METHOD FOR SHEAR IMPACT STRENGTH OF ADHESIVE BONDS
06/30155368 DC : 0 PREN 14879-6 - ORGANIC COATING SYSTEMS AND LININGS FOR PROTECTION OF INDUSTRIAL APPARATUS AND PLANTS AGAINST CORROSION CAUSED BY AGGRESSIVE MEDIA - PART 6: COMBINED LININGS WITH TILE AND BRICK LAYERS
DIN EN 59:2016-06 GLASS REINFORCED PLASTICS - DETERMINATION OF INDENTATION HARDNESS BY MEANS OF A BARCOL HARDNESS TESTER
BS ISO 17555:2003 Plastics. Film and sheeting. Biaxially oriented polypropylene (PP) films
11/30239986 DC : DRAFT MAR 2011 BS EN 16245-5 - FIBRE-REINFORCED PLASTIC COMPOSITES - DECLARATION OF RAW MATERIAL CHARACTERISTICS - PART 5: SPECIFIC REQUIREMENTS FOR CORE MATERIALS
PREN 14869-2 : DRAFT 2010 STRUCTURAL ADHESIVES - DETERMINATION OF SHEAR BEHAVIOUR OF STRUCTURAL BONDS - PART 2: THICK ADHERENDS SHEAR TEST
04/30092689 DC : DRAFT OCT 2004 ISO 22088-5 - PLASTICS - DETERMINATION OF RESISTANCE TO ENVIRONMENTAL STRESS CRACKING (ESC) - PART 5: CONSTANT TENSILE DEFORMATION METHOD
13/30259881 DC : 0 BS ISO 22007-6 - PLASTICS - DETERMINATION OF THERMAL CONDUCTIVITY AND THERMAL DIFFUSIVITY - PART 6: COMPARATIVE METHOD FOR LOW THERMAL CONDUCTIVITIES USING A TEMPERATURE-MODULATION TECHNIQUE
04/30113001 DC : DRAFT APR 2004 BS ISO 1926 - RIGID CELLULAR PLASTICS - DETERMINATION OF TENSILE PROPERTIES
14/30304003 DC : 0 BS EN 62899-1 ED.1 - PRINTED ELECTRONICS - MATERIALS - PART 1: SUBSTRATES
BS EN 15870:2009 Adhesives. Determination of tensile strength of butt joints
I.S. EN ISO 22088-4:2007 PLASTICS - DETERMINATION OF RESISTANCE TO ENVIRONMENTAL STRESS CRACKING (ESC) - PART 4: BALL OR PIN IMPRESSION METHOD
BS EN 16245-2:2013 Fibre-reinforced plastic composites. Declaration of raw material characteristics Specific requirements for resin, curing systems, additives and modifiers
DIN EN ISO 9988-2 E : 2015 PLASTICS - POLYOXYMETHYLENE (POM) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES (ISO 9988-2:2006)
PREN 15651-4 : DRAFT 2012 SEALANTS FOR NON-STRUCTURAL USE IN JOINTS IN BUILDINGS AND PEDESTRIAN WALKWAYS - PART 4: SEALANTS FOR PEDESTRIAN WALKWAYS
ISO 13003:2003 Fibre-reinforced plastics Determination of fatigue properties under cyclic loading conditions
BS ISO 12000:2014 Plastics/rubber. Polymer dispersions and rubber lattices (natural and synthetic). Definitions and review of test methods
ONORM EN ISO 11833-1 : 2012 PLASTICS - UNPLASTICIZED POLY(VINYL CHLORIDE) SHEETS - TYPES, DIMENSIONS AND CHARACTERISTICS - PART 1: SHEETS OF THICKNESS NOT LESS THAN 1 MM (ISO 11833-1:2012)
BS ISO 15014:2007 Plastics. Extruded sheets of poly(vinylidene fluoride) (PVDF). Requirements and test methods
BS EN ISO 11357-3:2013 Plastics. Differential scanning calorimetry (DSC) Determination of temperature and enthalpy of melting and crystallization
BS 2782-3 Method 365C:1986 Methods of testing plastics. Mechanical properties Determination of Rockwell hardness
11/30246689 DC : 0 BS EN 60216-8 - ELECTRICAL INSULATING MATERIALS - THERMAL ENDURANCE PROPERTIES - PART 8: INSTRUCTIONS FOR CALCULATING THERMAL ENDURANCE CHARACTERISTICS USING SIMPLIFIED PROCEDURES
BS ISO 2898-2 : 1997 AMD 10727 PLASTICS - PLASTICIZED POLY(VINYL CHLORIDE) (PVC-P) MOULDING AND EXTRUSION MATERIALS - PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
BS ISO 3597-1:2003 Textile-glass-reinforced plastics. Determination of mechanical properties on rods made of roving-reinforced resin General considerations and preparation of rods
BS ISO 15114:2014 Fibre-reinforced plastic composites. Determination of the mode II fracture resistance for unidirectionally reinforced materials using the calibrated end-loaded split (C-ELS) test and an effective crack length approach
BS ISO 22007-6 : 2014 PLASTICS - DETERMINATION OF THERMAL CONDUCTIVITY AND THERMAL DIFFUSIVITY - PART 6: COMPARATIVE METHOD FOR LOW THERMAL CONDUCTIVITIES USING A TEMPERATURE-MODULATION TECHNIQUE
CEI EN 62788-1-5 : 1ED 2017 MEASUREMENT PROCEDURES FOR MATERIALS USED IN PHOTOVOLTAIC MODULES - PART 1-5: ENCAPSULANTS - MEASUREMENT OF CHANGE IN LINEAR DIMENSIONS OF SHEET ENCAPSULATION MATERIAL RESULTING FROM APPLIED THERMAL CONDITIONS
DIN EN 15466-3:2009-10 Primers for cold and hot applied joint sealants - Part 3: Determination of solids content and evaporation behaviour of volatiles
17/30348289 DC : 0 BS EN 17098-2 - PLASTICS - BARRIER FILMS FOR AGRICULTURAL AND HORTICULTURAL SOIL DISINFECTION BY FUMIGATION - PART 2: METHOD FOR FILM PERMEABILITY DETERMINATION USING A STATIC TECHNIQUE
BS ISO 3343:2010 Reinforcement yarns. Determination of twist balance index
05/30141298 DC : DRAFT NOV 2005 ISO 20392 - RIGID CELLULAR PLASTICS - DETERMINATION OF COMPRESSIVE CREEP
07/30165535 DC : 0 BS ISO 10406-2 - FIBRE-REINFORCED POLYMER (FRP) REINFORCEMENT OF CONCRETE - TEST METHODS - PART 2: FRP SHEETS
DIN EN ISO 11358-1:2014-10 Plastics - Thermogravimetry (TG) of polymers - Part 1: General principles (ISO 11358-1:2014)
BS ISO 11359-3:2002 Plastics. Thermomechanical analysis (TMA) Determination of penetration temperature
BS ISO 9163 : 1996 AMD 10351 TEXTILE GLASS - ROVINGS - MANUFACTURE OF TEST SPECIMENS AND DETERMINATION OF TENSILE STRENGTH OF IMPREGNATED ROVINGS
BS ISO 29664 : 2010 PLASTICS - ARTIFICIAL WEATHERING INCLUDING ACIDIC DEPOSITION
15/30321226 DC : 0 BS EN ISO 20568-2 - PLASTICS - FLUOROPOLYMER DISPERSION AND MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
BS ISO 15314:2004 Plastics. Methods for marine exposure
UNE-EN 15466-2:2010 Primers for cold and hot applied joint sealants - Part 2: Determination of resistance against alkali
AFAP-3 : 2010 NATO REACTION-TO-FIRE TESTS FOR MATERIALS - TOXICITY OF FIRE EFFLUENTS
16/30317348 DC : 0 BS EN 15860 - PLASTICS - THERMOPLASTIC SEMI-FINISHED PRODUCTS FOR MACHINING - REQUIREMENTS AND TEST METHODS
BS ISO 9352:2012 Plastics. Determination of resistance to wear by abrasive wheels
UNE-EN ISO 11357-2:2015 Plastics - Differential scanning calorimetry (DSC) - Part 2: Determination of glass transition temperature and glass transition step height (ISO 11357-2:2013)
I.S. EN ISO 9988-2:2015 PLASTICS - POLYOXYMETHYLENE (POM) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES (ISO 9988-2:2006)
11/30242080 DC : DRAFT MAY 2011 BS ISO 16486-5 - PLASTICS PIPING SYSTEMS FOR THE SUPPLY OF GASEOUS FUELS - UNPLASTICIZED POLYAMIDE (PA-U) PIPING SYSTEMS WITH FUSION JOINTING AND MECHANICAL JOINTING - PART 5: FITNESS FOR PURPOSE OF THE SYSTEM
ISO 17467-2:2012 Plastics piping systems for the supply of gaseous fuels Unplasticized polyamide (PA-U) piping systems jointed by solvent cement Part 2: Pipes
18/30344274 DC : DRAFT APR 2018 BS ISO 21475 - PLASTICS - METHODS OF EXPOSURE TO DETERMINE THE WAVELENGTH DEPENDENT DEGRADATION USING SPECTRALLY DISPERSED RADIATION
BS ISO 8296:2003 Plastics. Film and sheeting. Determination of wetting tension
02/564513 DC : DRAFT OCT 2002 BS EN ISO 1135-4 - INFUSION EQUIPMENT FOR MEDICAL USE - PART 4: TRANSFUSION SETS FOR SINGLE USE
11/30239980 DC : DRAFT MAR 2011 BS EN 16245-3 - FIBRE-REINFORCED PLASTIC COMPOSITES - DECLARATION OF RAW MATERIAL CHARACTERISTICS - PART 3: SPECIFIC REQUIREMENTS FOR FIBRE
BS 2782-6.643B(1996) : 1996 AMD 15283 METHODS OF TESTING PLASTICS - DIMENSIONAL PROPERTIES - DETERMINATION OF DIMENSIONAL CHANGE ON HEATING OF FILM AND SHEETING
BS EN 62788-1-6:2017 Measurement procedures for materials used in photovoltaic modules Encapsulants. Test methods for determining the degree of cure in Ethylene-Vinyl Acetate
05/30128281 DC : DRAFT JAN 2005 ISO 9988-2 - PLASTICS - POLYOXYMETHYLENE (POM) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
BS 2782-7 Method 730B:1978 Methods of testing plastics. Rheological properties Determination of the viscosity of polymers in the liquid, emulsified or dispersed state using a rotational viscometer working at a defined shear rate
BS EN 62878-1-1:2015 Device embedded substrate Generic specification. Test methods
16/30328584 DC : 0 BS ISO 19699-1 - PLASTICS - SUPERABSORBENT POLYMER - SODIUM POLYACRYLATE RESIN FOR ABSORBING BLOOD - PART 1: TEST METHODS
12/30254694 DC : DRAFT MAR 2012 BS ISO 16525-8 - ADHESIVES - TEST METHODS FOR ISOTROPICALLY ELECTRICALLY CONDUCTING ADHESIVES - PART 8: ELECTROCHEMICAL-MIGRATION TEST METHODS
UNI EN 13696 : 2009 WOOD FLOORING - TEST METHODS TO DETERMINE ELASTICITY AND RESISTANCE TO WEAR AND IMPACT RESISTANCE
00/121284 DC : DRAFT MAR 2000 PREN 13864 - SURFACES FOR SPORTS AREAS - DETERMINATION OF TENSILE STRENGTH OF SYNTHETIC YARNS
BS ISO 12815:2013 Fibre-reinforced plastic composites. Determination of plain-pin bearingstrength
BS 7825-3.3:1997 Calibration of rubber and plastics test equipment. Calibration schedules Mechanical properties of plastics
DIN EN ISO 9988-2:2015-05 PLASTICS - POLYOXYMETHYLENE (POM) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES (ISO 9988-2:2006)
12/30254682 DC : DRAFT MAR 2012 BS ISO 16525-4 - ADHESIVES - TEST METHODS FOR ISOTROPICALLY ELECTRICALLY CONDUCTING ADHESIVES - PART 4: DETERMINATION OF SHEAR STRENGTH AND ELECTRICAL RESISTANCE USING RIGID-TO-RIGID BONDED ASSEMBLIES
04/30109201 DC : DRAFT OCT 2004 EN 14879-2 - ORGANIC COATING SYSTEMS AND LININGS FOR PROTECTION OF INDUSTRIAL APPARATUS AND PLANTS AGAINST CORROSION CAUSED BY AGGRESSIVE MEDIA - PART 2: COATINGS ON METALLIC COMPONENTS
BS ISO 14910-2 : 1997 AMD 16024 PLASTICS - THERMOPLASTIC POLYESTER/ESTER AND POLYETHER/ESTER ELASTOMERS FOR MOULDING AND EXTRUSION - PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
17/30350545 DC : 0 BS EN ISO 11357-3 - PLASTICS - DIFFERENTIAL SCANNING CALORIMETRY (DSC) - PART 3: DETERMINATION OF TEMPERATURE AND ENTHALPY OF MELTING AND CRYSTALLIZATION
DIN EN ISO 11855-5 E : 2015 BUILDING ENVIRONMENT DESIGN - DESIGN, DIMENSIONING, INSTALLATION AND CONTROL OF EMBEDDED RADIANT HEATING AND COOLING SYSTEMS - PART 5: INSTALLATION (ISO 11855-5:2012)
BS 2782-1.120A,B,D,E(1990) : LATEST METHODS OF TESTING PLASTICS - THERMAL PROPERTIES - METHODS 120A, B, D AND E - DETERMINATION OF VICAT SOFTENING TEMPERATURE OF THERMOPLASTICS
16/30323587 DC : DRAFT JAN 2016 BS EN ISO 5659-2 - PLASTICS - SMOKE GENERATION - PART 2: DETERMINATION OF OPTICAL DENSITY BY A SINGLE-CHAMBER TEST
12/30263544 DC : 0 BS EN 60216-1 - ELECTRICAL INSULATING MATERIALS - THERMAL ENDURANCE PROPERTIES - PART 1: AGEING PROCEDURES AND EVALUATION OF TEST RESULTS
PD ISO/TS 19700:2016 Controlled equivalence ratio method for the determination of hazardous components of fire effluents. Steady-state tube furnace
UNE-EN 16245-4:2014 Fibre-reinforced plastic composites - Declaration of raw material characteristics - Part 4: Specific requirements for fabrics
ISO 7765-2:1994 Plastics film and sheeting Determination of impact resistance by the free-falling dart method Part 2: Instrumented puncture test
BS ISO 13003:2003 Fibre-reinforced plastics. Determination of fatigue properties under cyclic loading conditions
BS ISO/TR 5659-3:1999 Plastics. Smoke generation Determination of optical density by a dynamic flow method
08/30181781 DC : DRAFT JULY 2008 BS EN 15836-2 - PLASTICS - PLASTICIZED POLY(VINYL CHLORIDE) (PVC-P) MEMBRANES FOR INGROUND SWIMMING POOLS - PART 2: REINFORCED MEMBRANES OF NOMINAL THICKNESS EQUAL TO OR GREATER THAN 1,5 MM
BS EN 62788-1-5:2016 Measurement procedures for materials used in photovoltaic modules Encapsulants. Measurement of change in linear dimensions of sheet encapsulation material resulting from applied thermal conditions
I.S. EN 60455-3-8:2013 RESIN BASED REACTIVE COMPOUNDS USED FOR ELECTRICAL INSULATION - PART 3: SPECIFICATIONS FOR INDIVIDUAL MATERIALS - SHEET 8: RESINS FOR CABLE ACCESSORIES (IEC 60455-3-8:2013 (EQV))
ISO 16486-1:2012 Plastics piping systems for the supply of gaseous fuels - Unplasticized polyamide (PA-U) piping systems with fusion jointing and mechanical jointing Part 1: General
11/30248333 DC : 0 BS ISO 17467-2 - PLASTICS PIPING SYSTEMS FOR THE SUPPLY OF GASEOUS FUELS - UNPLASTICIZED POLYAMIDE (PA-U) PIPING SYSTEMS JOINTED BY SOLVENT CEMENT - PART 2: PIPES
06/30134641 DC : DRAFT MAR 2006 ISO 19252 - PLASTICS - DETERMINATION OF SCRATCH PROPERTIES
BS EN ISO 877-1:2010 Plastics. Methods of exposure to solar radiation General guidance
BS ISO 14663-2 : 1999 AMD 16029 PLASTICS - ETHYLENE/VINYL ALCOHOL (EVOH) COPOLYMER MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
BS ISO 7792-2 : 1997 AMD 15252 PLASTICS - THERMOPLASTIC POLYESTER (TP) MOULDING AND EXTRUSION MATERIALS - PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
DIN EN ISO 11357-2 E : 2014 PLASTICS - DIFFERENTIAL SCANNING CALORIMETRY (DSC) - PART 2: DETERMINATION OF GLASS TRANSITION TEMPERATURE AND GLASS TRANSITION STEP HEIGHT (ISO 11357-2:2013)
12/30215688 DC : 0 BS ISO 15114 - FIBRE-REINFORCED PLASTIC COMPOSITES - DETERMINATION OF THE MODE 2 FRACTURE RESISTANCE FOR UNIDIRECTIONALLY REINFORCED MATERIALS USING THE CALIBRATED END-LOADED SPLIT (C-ELS) TEST AND AN EFFECTIVE CRACK LENGTH APPROACH
BS ISO 16790:2005 Plastics. Determination of drawing characteristics of thermoplastics in the molten state
BS ISO/IEC 15457-3:2008 Identification cards. Thin flexible cards Test methods
11/30234454 DC : 0 BS EN ISO 6721-1 - PLASTICS - DETERMINATION OF DYNAMIC MECHANICAL PROPERTIES - PART 1: GENERAL PRINCIPLES
BS ISO 2558:2010 Textile glass chopped-strand mats for reinforcement of plastics. Determination of time of dissolution of the binder in styrene
12/30242496 DC : DRAFT MAR 2012 BS ISO 16525-1 - ADHESIVES - TEST METHODS FOR ISOTROPICALLY ELECTRICALLY CONDUCTING ADHESIVES - PART 1: GENERAL TEST METHODS
08/30181778 DC : DRAFT JULY 2008 BS EN 15836-1 - PLASTICS - PLASTICIZED POLY(VINYL CHLORIDE) (PVC-P) MEMBRANES FOR INGROUND SWIMMING POOLS - PART 1: HOMOGENOUS MEMBRANES OF NOMINAL THICKNESS EQUAL TO OR GREATER THAN 0,75 MM
UNE-EN 16245-5:2014 Fibre-reinforced plastic composites - Declaration of raw material characteristics - Part 5: Specific requirements for core materials
BS 2782-8 Method 830A:1986 Methods of testing plastics. Other properties Determination of the effects of liquid chemicals, including water
15/30309530 DC : 0 BS EN 62788-1-6 ED 1.0 - MEASUREMENT PROCEDURES FOR MATERIALS USED IN PHOTOVOLTAIC MODULES - PART 1-6: ENCAPSULANTS - TEST METHODS FOR DETERMINING THE DEGREE OF CURE IN ETHYLENE-VINYL ACETATE ENCAPSULATION FOR PHOTOVOLTAIC MODULES
BS ISO 3375:2009 Textile glass. Determination of stiffness of rovings
10/30210321 DC : 0 BS ISO 18944 - IMAGING MATERIALS - REFLECTION COLOUR PHOTOGRAPHIC PRINTS - TEST PRINT CONSTRUCTION AND MEASUREMENT
ISO 1183-2:2004 Plastics Methods for determining the density of non-cellular plastics Part 2: Density gradient column method
07/30165530 DC : 0 BS ISO 10406-1 - FIBRE-REINFORCED POLYMER (FRP) REINFORCEMENT OF CONCRETE - TEST METHODS - PART 1: FRP BARS AND GRIDS
BS IEC 62899-402-1:2017 Printed electronics Printability. Measurement of qualities. Pattern width
03/118818 DC : DRAFT DEC 2003 BS EN ISO 7391-2 - PLASTICS - POLYCARBONATE (PC) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
17/30335677 DC : 0 BS EN ISO 178 - PLASTICS - DETERMINATION OF FLEXURAL PROPERTIES
EN ISO 13468-2:2006 Plastics - Determination of the total luminous transmittance of transparent materials - Part 2: Double-beam instrument (ISO 13468-2:1999)
UNE-EN 438-2:2016 High-pressure decorative laminates (HPL) - Sheets based on thermosetting resins (Usually called Laminates) - Part 2: Determination of properties
ISO 15527:2010 Plastics Compression-moulded sheets of polyethylene (PE-UHMW, PE-HD) Requirements and test methods
I.S. EN ISO 14632:1999 EXTRUDED SHEETS OF POLYETHYLENE (PE-HD) - REQUIREMENTS AND TEST METHODS
NF ISO 3598 : 2011 TEXTILE GLASS - YARNS - BASIS FOR A SPECIFICATION
04/30078970 DC : DRAFT OCT 2004 ISO 22088-1 - PLASTICS - DETERMINATION OF RESISTANCE TO ENVIRONMENTAL STRESS CRACKING (ESC) - PART 1: GENERAL GUIDANCE
05/30131970 DC : DRAFT APR 2005 EN ISO 7214 - CELLULAR PLASTICS - POLYETHYLENE - METHODS OF TEST
09/30203717 DC : 0 BS ISO 4603:1993+AMD1 - TEXTILE GLASS - WOVEN FABRICS - DETERMINATION OF THICKNESS
BS EN ISO 6721-1:2011 Plastics. Determination of dynamic mechanical properties General principles
ASTM D 5935 : 1996 Practice for Acquisition and Presentation of Comparable Single-Point Data (Withdrawn 1998)
BS ISO 974:2000 Plastics. Determination of the brittleness temperature by impact
UNI EN 15865 : 2009 ADHESIVES - DETERMINATION OF TORQUE STRENGTH OF ANAEROBIC ADHESIVES ON THREADED FASTENERS
BS EN 60695-11-20:2015 Fire hazard testing Test flames. 500 W flame test methods
06/30146373 DC : DRAFT SEP 2006 ISO 22621-3 - PLASTICS PIPING SYSTEMS FOR THE SUPPLY OF GASEOUS FUELS FOR MAXIMUM OPERATING PRESSURE UP TO AND INCLUDING 20 BAR - POLYAMIDE (PA) - PART 3: FITTINGS
ISO 13586:2000 Plastics Determination of fracture toughness (GIC and KIC) Linear elastic fracture mechanics (LEFM) approach
ISO 4577:1983 Plastics Polypropylene and propylene-copolymers Determination of thermal oxidative stability in air Oven method
UNI EN 1264-4 : 2009 WATER BASED SURFACE EMBEDDED HEATING AND COOLING SYSTEMS - PART 4: INSTALLATION
DIN EN ISO 15527:2013-05 PLASTICS - COMPRESSION-MOULDED SHEETS OF POLYETHYLENE (PE-UHMW, PE-HD) - REQUIREMENTS AND TEST METHODS (ISO 15527:2010)
DIN EN ISO 16396-2 E : 2017 PLASTICS - POLYAMIDE (PA) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES (ISO 16396-2:2017)
ISO 16525-4:2014 Adhesives Test methods for isotropic electrically conductive adhesives Part 4: Determination of shear strength and electrical resistance using rigid-to-rigid bonded assemblies
BS EN ISO 29664:2017 Plastics. Artificial weathering including acidic deposition
BS ISO 16869:2001 Plastics. Assessment of the effectiveness of fungistatic compounds in plastics formulations
16/30341219 DC : 0 BS EN 17022 - CHILD CARE ARTICLES - BATHING AIDS - SAFETY REQUIREMENTS AND TEST METHODS
I.S. EN 62326-20:2016 PRINTED BOARDS - PART 20: PRINTED CIRCUIT BOARDS FOR HIGHBRIGHTNESS LEDS
BS ISO 12086-2 : 2001 AMD 10637 PLASTICS - FLUOROPOLYMER DISPERSIONS AND MOULDING AND EXTRUSION MATERIALS
17/30346164 DC : 0 BS ISO 20457 - PLASTICS MOULDED PARTS - TOLERANCES AND ACCEPTANCE CONDITIONS
UNE-EN ISO 8510-2:2011 Adhesives. Peel test for a flexible-bonded-to-rigid test specimen assembly. Part 2: 180 degree peel (ISO 8510-2:2006)
I.S. EN 16776:2016 RESILIENT FLOOR COVERINGS - HETEROGENEOUS POLYURETHANE FLOOR COVERINGS - SPECIFICATION
BS EN 50655-1:2017 Electric cables. Accessories. Material characterization Fingerprinting for resinous compounds
UNE-EN 59:2016 Glass reinforced plastics - Determination of indentation hardness by means of a Barcol hardness tester
I.S. EN 14879-6:2009 ORGANIC COATING SYSTEMS AND LININGS FOR PROTECTION OF INDUSTRIAL APPARATUS AND PLANTS AGAINST CORROSION CAUSED BY AGGRESSIVE MEDIA - PART 6: COMBINED LININGS WITH TILE AND BRICK LAYERS
I.S. EN 17098-1:2018 PLASTICS - BARRIER FILMS FOR AGRICULTURAL AND HORTICULTURAL SOIL DISINFECTION BY FUMIGATION - PART 1: SPECIFICATIONS FOR BARRIER FILMS
I.S. EN 60216-8:2013 ELECTRICAL INSULATING MATERIALS - THERMAL ENDURANCE PROPERTIES - PART 8: INSTRUCTIONS FOR CALCULATING THERMAL ENDURANCE CHARACTERISTICS USING SIMPLIFIED PROCEDURES (IEC 60216-8:2013 (EQV))
I.S. EN ISO 11358-1:2014 PLASTICS - THERMOGRAVIMETRY (TG) OF POLYMERS - PART 1: GENERAL PRINCIPLES (ISO 11358-1:2014)
ISO/TS 19392-2:2018 Paints and varnishes Coating systems for wind-turbine rotor blades Part 2: Determination and evaluation of resistance to rain erosion using rotating arm
ISO 3343:2010 Reinforcement yarns Determination of twist balance index
ISO 19699-1:2017 Superabsorbent polymer — Sodium polyacrylate resin for absorbing blood — Part 1: Test methods
I.S. EN 60216-1:2013 ELECTRICAL INSULATING MATERIALS - THERMAL ENDURANCE PROPERTIES - PART 1: AGEING PROCEDURES AND EVALUATION OF TEST RESULTS (IEC 60216-1:2013 (EQV))
UNE-EN ISO 16396-2:2017 Plastics - Polyamide (PA) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 16396-2:2017)
ISO 16486-5:2012 Plastics piping systems for the supply of gaseous fuels - Unplasticized polyamide (PA-U) piping systems with fusion jointing and mechanical jointing Part 5: Fitness for purpose of the system
BIS IS 8504-1 : 2012 ELECTRICAL INSULATING MATERIALS - THERMAL ENDURANCE PROPERTIES - PART 1: AGEING PROCEDURES AND EVALUATION OF TEST RESULTS
I.S. EN 16245-3:2013 FIBRE-REINFORCED PLASTIC COMPOSITES - DECLARATION OF RAW MATERIAL CHARACTERISTICS - PART 3: SPECIFIC REQUIREMENTS FOR FIBRE
I.S. EN ISO 1135-3:2017 TRANSFUSION EQUIPMENT FOR MEDICAL USE - PART 3: BLOOD-TAKING SETS FOR SINGLE USE (ISO 1135-3:2016)
BS IEC 62899-201 : 2016 PRINTED ELECTRONICS - PART 201: MATERIALS - SUBSTRATES
DIN EN ISO 1183-2:2004-10 PLASTICS - METHODS FOR DETERMINING THE DENSITY OF NON-CELLULAR PLASTICS - PART 2: DENSITY GRADIENT COLUMN METHOD
NF EN ISO 877-1 : 2011 PLASTICS - METHODS OF EXPOSURE TO SOLAR RADIATION - PART 1: GENERAL GUIDANCE
BS ISO 3616 : 2001 TEXTILE GLASS - CHOPPED-STRAND AND CONTINUOUS-FILAMENT MATS - DETERMINATION OF AVERAGE THICKNESS, THICKNESS UNDER LOAD AND RECOVERY AFTER COMPRESSION
ISO 18188:2016 Specification of polypropylene drinking straws
I.S. EN 60695-11-10:2013 FIRE HAZARD TESTING - PART 11-10: TEST FLAMES - 50 W HORIZONTAL AND VERTICAL FLAME TEST METHODS (IEC 60695-11-10:2013 (EQV))
I.S. EN 17098-2:2018 PLASTICS - BARRIER FILMS FOR AGRICULTURAL AND HORTICULTURAL SOIL DISINFECTION BY FUMIGATION - PART 2: METHOD FOR FILM PERMEABILITY DETERMINATION USING A STATIC TECHNIQUE
I.S. EN 438-2:2016 HIGH-PRESSURE DECORATIVE LAMINATES (HPL) - SHEETS BASED ON THERMOSETTING RESINS (USUALLY CALLED LAMINATES) - PART 2: DETERMINATION OF PROPERTIES
ISO 12815:2013 Fibre-reinforced plastic composites — Determination of plain-pin bearing strength
DIN EN ISO 29664:2016-09 (Draft) PLASTICS - ARTIFICIAL WEATHERING INCLUDING ACIDIC DEPOSITION (ISO 29664:2010)
I.S. EN ISO 11357-3:2013 PLASTICS - DIFFERENTIAL SCANNING CALORIMETRY (DSC) - PART 3: DETERMINATION OF TEMPERATURE AND ENTHALPY OF MELTING AND CRYSTALLIZATION (ISO 11357-3:2018)
BS EN ISO 1183-2:2004 Plastics. Methods for determining the density of non-cellular plastics Density gradient column method
ISO 11359-3:2002 Plastics Thermomechanical analysis (TMA) Part 3: Determination of penetration temperature
EN ISO 2507-1:2017 Thermoplastics pipes and fittings - Vicat softening temperature - Part 1: General test method (ISO 2507-1:1995)
DIN EN ISO 20028-2:2015-08 (Draft) PLASTICS - THERMOPLASTIC POLYESTER (TP) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES (ISO 20028-2:2017)
ISO 8873-1:2006 Rigid cellular plastics — Spray-applied polyurethane foam for thermal insulation — Part 1: Material specifications
ISO 2818:1994 Plastics — Preparation of test specimens by machining
NF ISO 4603 : 1996 AMD 1 2011 TEXTILE GLASS - WOVEN FABRICS - DETERMINATION OF THICKNESS
ISO 1183-1:2012 Plastics Methods for determining the density of non-cellular plastics Part 1: Immersion method, liquid pyknometer method and titration method
AFAP-4 : 2010 NATO REACTION-TO-FIRE TESTS FOR MATERIALS - SURFACE SPREAD OF FLAME
PREN ISO 11833-1 : DRAFT 2010 PLASTICS - UNPLASTICIZED POLY(VINYL CHLORIDE) SHEETS - TYPES, DIMENSIONS AND CHARACTERISTICS - PART 1: SHEETS OF THICKNESS NOT LESS THAN 1 MM
I.S. EN 15865:2009 ADHESIVES - DETERMINATION OF TORQUE STRENGTH OF ANAEROBIC ADHESIVES ON THREADED FASTENERS
ISO 15850:2014 Plastics Determination of tension-tension fatigue crack propagation Linear elastic fracture mechanics (LEFM) approach
I.S. EN 13696:2009 WOOD FLOORING - TEST METHODS TO DETERMINE ELASTICITY AND RESISTANCE TO WEAR AND IMPACT RESISTANCE
EN ISO 15527:2013 Plastics - Compression-moulded sheets of polyethylene (PE-UHMW, PE-HD) - Requirements and test methods (ISO 15527:2010)
BS EN 17098-1:2018 Plastics. Barrier films for agricultural and horticultural soil disinfection by fumigation Specifications for barrier films
DIN EN ISO 6721-1:2011-08 PLASTICS - DETERMINATION OF DYNAMIC MECHANICAL PROPERTIES - PART 1: GENERAL PRINCIPLES
PREN 1794-3 : DRAFT 2014 ROAD TRAFFIC NOISE REDUCING DEVICES - NON-ACOUSTIC PERFORMANCE - PART 3: REACTION TO FIRE - BURNING BEHAVIOUR OF NOISE REDUCING DEVICES AND CLASSIFICATION
CEI EN 60216-1 : 2014 ELECTRICAL INSULATING MATERIALS - THERMAL ENDURANCE PROPERTIES - PART 1: AGEING PROCEDURES AND EVALUATION OF TEST RESULTS
BS EN ISO 1183-1:2012 Plastics. Methods for determining the density of non-cellular plastics Immersion method, liquid pyknometer method and titration method
PREN 14903 : DRAFT 2015 SURFACES FOR SPORTS AREAS - SYNTHETIC SURFACES FOR OUTDOOR SPORTS AREAS - DETERMINATION OF ROTATIONAL FRICTION
I.S. EN ISO 22007-6:2015 PLASTICS - DETERMINATION OF THERMAL CONDUCTIVITY AND THERMAL DIFFUSIVITY - PART 6: COMPARATIVE METHOD FOR LOW THERMAL CONDUCTIVITIES USING A TEMPERATURE-MODULATION TECHNIQUE (ISO 22007-6:2014)
ISO 5660-4:2008 Reaction-to-fire tests Heat release, smoke production and mass loss rate Part 4: Measurement of heat release for determination of low levels of combustibility
ONORM EN ISO 11502 : 2005 PLASTICS - FILM AND SHEETING - DETERMINATION OF BLOCKING RESISTANCE
ISO 6721-12:2009 Plastics Determination of dynamic mechanical properties Part 12: Compressive vibration Non-resonance method
EN ISO 1110:1997 PLASTICS - POLYAMIDES - ACCELERATED CONDITIONING OF TEST SPECIMENS
UNE-EN ISO 472:2015 Plastics - Vocabulary (ISO 472:2013)
ISO 19095-1:2015 Plastics Evaluation of the adhesion interface performance in plastic-metal assemblies Part 1: Guidelines for the approach
ISO 16486-2:2012 Plastics piping systems for the supply of gaseous fuels - Unplasticized polyamide (PA-U) piping systems with fusion jointing and mechanical jointing Part 2: Pipes
ISO 15439-1:2007 Plastics piping systems for the supply of gaseous fuels for maximum operating pressure up to and including 0,4 MPa (4 bar) Polyamide (PA) Part 1: General
ISO 6721-1:2011 Plastics Determination of dynamic mechanical properties Part 1: General principles
ISO 17223:2014 Plastics — Determination of yellowness index and change in yellowness index
ISO 16790:2005 Plastics Determination of drawing characteristics of thermoplastics in the molten state
ISO 15024:2001 Fibre-reinforced plastic composites — Determination of mode I interlaminar fracture toughness, GIC, for unidirectionally reinforced materials
I.S. EN ISO 1183-1:2012 PLASTICS - METHODS FOR DETERMINING THE DENSITY OF NON-CELLULAR PLASTICS - PART 1: IMMERSION METHOD, LIQUID PYKNOMETER METHOD AND TITRATION METHOD (ISO 1183-1:2012)
ISO 6238:2001 Adhesives Wood-to-wood adhesive bonds Determination of shear strength by compressive loading
IEC TS 60695-11-11:2016 Fire hazard testing - Part 11-11: Test flames - Determination of the characteristic heat flux for ignition from a non-contacting flame source
ISO/TR 18930:2001 Imaging materials Protocols for outdoor weathering experiments
ISO 4900:2011 Textile glass Mats and fabrics Determination of contact mouldability
ISO 13106:2014 Plastics Blow-moulded polypropylene containers for packaging of liquid foodstuffs
EN ISO 180:2000/A2:2013 PLASTICS - DETERMINATION OF IZOD IMPACT STRENGTH (ISO 180:2000/AMD 2:2013)
ISO 10120:1991 Carbon fibre — Determination of linear density
IEC TS 60695-11-21:2005 Fire hazard testing - Part 11-21: Test flames - 500 W vertical flame test method for tubular polymeric materials
ISO/IEC 15457-3:2008 Identification cards — Thin flexible cards — Part 3: Test methods
ISO 846:1997 Plastics Evaluation of the action of microorganisms
IEC 60695-11-10:2013 Fire hazard testing - Part 11-10: Test flames - 50 W horizontal and vertical flame test methods
DIN EN ISO 75-1:2013-08 PLASTICS - DETERMINATION OF TEMPERATURE OF DEFLECTION UNDER LOAD - PART 1: GENERAL TEST METHOD (ISO 75-1:2013)
UNI EN ISO 11403-3 : 2014 PLASTICS - ACQUISITION AND PRESENTATION OF COMPARABLE MULTIPOINT DATA - PART 3: ENVIRONMENTAL INFLUENCES ON PROPERTIES
ISO 22621-2:2007 Plastics piping systems for the supply of gaseous fuels for maximum operating pressures up to and including 2 MPa (20 bar) Polyamide (PA) Part 2: Pipes
ISO 15509:2001 Adhesives Determination of the bond strength of engineering-plastic joints
ISO 17281:2002 Plastics Determination of fracture toughness (GIC and KIC) at moderately high loading rates (1 m/s)
I.S. EN 62878-1-1:2015 DEVICE EMBEDDED SUBSTRATE - PART 1-1: GENERIC SPECIFICATION - TEST METHODS
ISO 899-1:2017 Plastics — Determination of creep behaviour — Part 1: Tensile creep
UNE-EN ISO 13927:2016 Plastics - Simple heat release test using a conical radiant heater and a thermopile detector (ISO 13927:2015)
I.S. EN ISO 8536-4:2013 INFUSION EQUIPMENT FOR MEDICAL USE - PART 4: INFUSION SETS FOR SINGLE USE, GRAVITY FEED (ISO 8536-4:2010)
BS EN ISO 8536-4 : 2013 INFUSION EQUIPMENT FOR MEDICAL USE - PART 4: INFUSION SETS FOR SINGLE USE, GRAVITY FEED
ISO 11357-2:2013 Plastics Differential scanning calorimetry (DSC) Part 2: Determination of glass transition temperature and glass transition step height
DIN EN ISO 7823-1:2003-12 PLASTICS - POLY(METHYL METHACRYLATE) SHEETS - TYPES, DIMENSIONS AND CHARACTERISTICS - PART 1: CAST SHEETS
DIN EN ISO 14125:2011-05 Fibre-reinforced plastic composites - Determination of flexural properties (ISO 14125:1998 + Cor 1:2001 + Amd 1:2011)
DIN EN ISO 14130:1998-02 FIBRE REINFORCED PLASTIC COMPOSITES - DETERMINATION OF APPARENT INTERLAMINAR SHEAR STRENGTH BY SHORT-BEAM METHOD
DIN EN ISO 4892-1:2016-10 PLASTICS - METHODS OF EXPOSURE TO LABORATORY LIGHT SOURCES - PART 1: GENERAL GUIDANCE (ISO 4892-1:2016)
DIN EN ISO 7823-3:2007-08 Plastics - Poly(methyl methacrylate) sheets - Types, dimensions and characteristics - Part 3: Continuous cast sheets (ISO 7823-3:2007)
UNE-EN ISO 7792-2:2013 Plastics - Thermoplastic polyester (TP) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 7792-2:2012)
DIN EN ISO 11542-2:2010-01 Plastics - Ultra-high-molecular-weight polyethylene (PE-UHMW) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 11542-2:1998 + Cor. 1:2007) (includes Corrigendum AC:2008)
DIN EN 14415 E : 2004 GEOSYNTHETIC BARRIERS - TEST METHOD FOR DETERMINING THE RESISTANCE TO LEACHING
DIN EN ISO 175 E : 2011 PLASTICS - METHODS OF TEST FOR THE DETERMINATION OF THE EFFECTS OF IMMERSION IN LIQUID CHEMICALS
DIN EN 1965-2:2011-07 Structural adhesives - Corrosion - Part 2: Determination and classification of corrosion to a brass substrate
DIN EN ISO 8536-4:2013-07 INFUSION EQUIPMENT FOR MEDICAL USE - PART 4: INFUSION SETS FOR SINGLE USE, GRAVITY FEED (ISO 8536-4:2010 + AMD 1:2013)
DIN EN ISO 7823-2:2003-12 PLASTICS - POLY(METHYL METHACRYLATE) SHEETS - TYPES, DIMENSIONS AND CHARACTERISTICS - PART 2: EXTRUDED SHEETS
ISO 9054:1990 Cellular plastics, rigid — Test methods for self-skinned, high-density materials
ISO 4892-1:2016 Plastics Methods of exposure to laboratory light sources Part 1: General guidance
UNE-EN ISO 1135-4:2016 Transfusion equipment for medical use - Part 4: Transfusion sets for single use, gravity feed (ISO 1135-4:2015)
BS EN ISO 2039-1:2003 Plastics. Determination of hardness Ball indentation method
11/30242263 DC : 0 BS EN 4691-001 - AEROSPACE SERIES - TIE ROD WITH INTEGRATED BOLTS - TECHNICAL SPECIFICATION
BS EN ISO 14529-2:2000 Plastics. Melamine/phenolic powder moulding compounds (MP-PMCs) Preparation of test specimens and determination of properties
BS EN ISO 14126:1999 Fibre-reinforced plastic composites. Determination of compressive properties in the in-plane direction
UNE-EN ISO 179-1:2011 Plastics - Determination of Charpy impact properties - Part 1: Non-instrumented impact test (ISO 179-1:2010)
BS EN ISO 9163:2005 Textile glass. Rovings. Manufacture of test specimens and determination of tensile strength of impregnated rovings
BS EN ISO 11358:1997 Plastics. Thermogravimetry (TG) of polymers. General principles
BS EN ISO 12017:1996 Plastics. Poly(methyl methacrylate) double- and triple-skin sheets. Test methods
BS EN 12960:2001 Adhesives for paper and board, packaging and disposable sanitary products. Determination of shear resistance
BS EN ISO 22088-4:2006 Plastics. Determination of resistance to environmental stress cracking (ESC) Ball or pin impression method
ISO 176:2005 Plastics — Determination of loss of plasticizers — Activated carbon method
BS EN ISO 2578:1999 Plastics. Determination of the time-temperature limits after prolonged exposure to heat
BS EN 1464:2010 Adhesives. Determination of peel resistance of adhesive bonds. Floating roller method
ISO 11358-1:2014 Plastics Thermogravimetry (TG) of polymers Part 1: General principles
BS EN ISO 11339:2010 Adhesives. T-peel test for flexible-to-flexible bonded assemblies
ONORM EN ISO 180 : 2013 PLASTICS - DETERMINATION OF IZOD IMPACT STRENGTH (ISO 180:2000 + AMD. 1:2006 + AMD. 2:2013)
BS EN ISO 4589-2:2017 Plastics. Determination of burning behaviour by oxygen index Ambient-temperature test
ISO 6252:1992 Plastics Determination of environmental stress cracking (ESC) Constant-tensile-stress method
DIN EN ISO 604:2003-12 PLASTICS - DETERMINATION OF COMPRESSIVE PROPERTIES
BS EN 12654-1:1999 Textile glass. Yarns Designation
ISO 11667:1997 Fibre-reinforced plastics — Moulding compounds and prepregs — Determination of resin, reinforced-fibre and mineral-filler content — Dissolution methods
ISO 23667:2007 Packaging Transport packaging for dangerous goods Rigid plastics and plastics composite IBCs Compatibility testing
ISO 13927:2015 Plastics — Simple heat release test using a conical radiant heater and a thermopile detector
ISO 14528-2:1999 Plastics Melamine-formaldehyde powder moulding compounds (MF-PMCs) Part 2: Preparation of test specimens and determination of properties
ISO 1135-3:2016 Transfusion equipment for medical use Part 3: Blood-taking sets for single use
BS EN 1400-2:2002 Child use and care articles. Soothers for babies and young children Mechanical requirements and tests
ISO 2578:1993 Plastics Determination of time-temperature limits after prolonged exposure to heat
I.S. EN ISO 11343:2005 ADHESIVES - DETERMINATION OF DYNAMIC RESISTANCE TO CLEAVAGE OF HIGH-STRENGTH ADHESIVE BONDS UNDER IMPACT CONDITIONS - WEDGE IMPACT METHOD
ISO 489:1999 Plastics Determination of refractive index
ISO 11403-3:2014 Plastics Acquisition and presentation of comparable multipoint data Part 3: Environmental influences on properties
ISO 13468-2:1999 Plastics Determination of the total luminous transmittance of transparent materials Part 2: Double-beam instrument
BS EN ISO 489:1999 Plastics. Determination of refractive index
ISO 2039-2:1987 Plastics Determination of hardness Part 2: Rockwell hardness
BS EN 12654-2:1999 Textile glass. Yarns Methods of test and general specifications
ISO 20028-2:2017 Plastics — Thermoplastic polyester (TP) moulding and extrusion materials — Part 2: Preparation of test specimens and determination of properties
ISO 179:1993 Plastics Determination of Charpy impact strength
BS EN 1007-2:2002 Advanced technical ceramics. Ceramic composites. Methods of test for reinforcements Determination of linear density
ISO 4613-2:1995 Plastics Ethylene/vinyl acetate (E/VAC) moulding and extrusion materials Part 2: Preparation of test specimens and determination of properties
ISO 11357-1:2016 Plastics — Differential scanning calorimetry (DSC) — Part 1: General principles
BS EN 29142:1993 Adhesives. Guide to the selection of standard laboratory ageing conditions for testing bonded joints
UNE-EN 1264-4:2010 Water based surface embedded heating and cooling systems - Part 4: Installation
BS EN ISO 3672-2:2001 Plastics. Unsaturated-polyester resins (UP-R) Preparation of test specimens and determination of properties
BS EN 1842:1997 Plastics. Thermoset moulding compounds (SMC-BMC). Determination of compression moulding shrinkage
BS EN 14879-4:2007 Organic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media Linings on metallic components
BS EN 12365-4:2003 Building hardware. Gasket and weatherstripping for doors, windows, shutters and curtain walling Recovery after accelerated ageing test method
BS EN 12943:2000 Filler materials for thermoplastics. Scope, designation, requirements, tests
BS EN ISO 899-2 : 2003 PLASTICS - DETERMINATION OF CREEP BEHAVIOUR - PART 2: FLEXURAL CREEP BY THREE-POINT LOADING
ISO 1874-2:2012 Plastics Polyamide (PA) moulding and extrusion materials Part 2: Preparation of test specimens and determination of properties
BS EN ISO 4892-1:2016 Plastics. Methods of exposure to laboratory light sources General guidance
IEC 62631-1:2011 Dielectric and resistive properties of solid insulating materials - Part 1: General
BS EN ISO 1889:2009 Reinforcement yarns. Determination of linear density
ISO 14129:1997 Fibre-reinforced plastic composites — Determination of the in-plane shear stress/shear strain response, including the in-plane shear modulus and strength, by the plus or minus 45 degree tension test method
ISO 175:2010 Plastics Methods of test for the determination of the effects of immersion in liquid chemicals
ISO 1135-4:2015 Transfusion equipment for medical use — Part 4: Transfusion sets for single use, gravity feed
ISO 9773:1998 Plastics — Determination of burning behaviour of thin flexible vertical specimens in contact with a small-flame ignition source
BS EN 14565:2004 Resilient floor coverings. Floor coverings based upon synthetic thermoplastic polymers. Specification
UNE-EN ISO 4589-2:2017 Plastics - Determination of burning behaviour by oxygen index - Part 2: Ambient-temperature test (ISO 4589-2:2017)
ISO 11833-2:1998 Plastics — Unplasticized poly(vinyl chloride) sheets — Types, dimensions and characteristics — Part 2: Sheets of thickness less than 1 mm
IEC 60464-2:2001+AMD1:2006 CSV Varnishes used for electrical insulation - Part 2: Methods of test
ISO 7765-1:1988 Plastics film and sheeting Determination of impact resistance by the free-falling dart method Part 1: Staircase methods
UNE-EN ISO 11855-5:2016 Building environment design - Design , dimensioning, installation and control of embedded radiant heating and cooling systems - Part 5: Installation (ISO 11855-5:2012)
ISO 11855-5:2012 Building environment design Design , dimensioning, installation and control of embedded radiant heating and cooling systems Part 5: Installation
ISO 20568-2:2017 Plastics Fluoropolymer dispersions and moulding and extrusion materials Part 2: Preparation of test specimens and determination of properties
IEC 60455-2:2015 Resin based reactive compounds used for electrical insulation - Part 2: Methods of test
ISO 14530-2:1999 Plastics Unsaturated-polyester powder moulding compounds (UP-PMCs) Part 2: Preparation of test specimens and determination of properties
BS EN ISO 13445:2006 Adhesives. Determination of shear strength of adhesive bonds between rigid substrates by the block-shear method
BS EN 14879-3:2006 Organic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media Coatings on concrete components
BS EN ISO 7823-2:2003 Plastics. Poly(methyl methacrylate) sheets. Types, dimensions and characteristics Extruded sheets
ISO 877-1:2009 Plastics — Methods of exposure to solar radiation — Part 1: General guidance
ISO 2039-1:2001 Plastics Determination of hardness Part 1: Ball indentation method
ISO 4600:1992 Plastics Determination of environmental stress cracking (ESC) Ball or pin impression method
ISO 177:2016 Plastics Determination of migration of plasticizers
UNE-EN 13592:2017 Plastics sacks for household waste collection - Types, requirements and test methods
BS EN ISO 15013:1999 Extruded sheets of polypropylene (PP). Requirements and test methods
ISO 4894-2:1995 Plastics Styrene/acrylonitrile (SAN) moulding and extrusion materials Part 2: Preparation of test specimens and determination of properties
ISO 11403-2:2012 Plastics — Acquisition and presentation of comparable multipoint data — Part 2: Thermal and processing properties
ISO 11501:1995 Plastics Film and sheeting Determination of dimensional change on heating
IEC TS 62788-2:2017 Measurement procedures for materials used in photovoltaic modules - Part 2: Polymeric materials - Frontsheets and backsheets
UNE-EN ISO 10350-2:2011 Plastics - Acquisition and presentation of comparable single-point data - Part 2: Long-fibre-reinforced plastics (ISO 10350-2:2011)
ISO 3344:1997 Reinforcement products — Determination of moisture content
BS EN ISO 306:2013 Plastics. Thermoplastic materials. Determination of Vicat softening temperature (VST)
ISO 12086-2:2006 Plastics Fluoropolymer dispersions and moulding and extrusion materials Part 2: Preparation of test specimens and determination of properties
ISO 10352:2010 Fibre-reinforced plastics Moulding compounds and prepregs Determination of mass per unit area
ISO 3672-2:2000 Plastics — Unsaturated-polyester resins (UP-R) — Part 2: Preparation of test specimens and determination of properties
UNE-EN ISO 5659-2:2018 Plastics - Smoke generation - Part 2: Determination of optical density by a single-chamber test (ISO 5659-2:2017)
ISO 22007-6:2014 Plastics — Determination of thermal conductivity and thermal diffusivity — Part 6: Comparative method for low thermal conductivities using a temperature-modulation technique
BS EN ISO 9664:1995 Adhesives. Test methods for fatigue properties of structural adhesives in tensile shear
ISO 845:2006 Cellular plastics and rubbers — Determination of apparent density
ISO 306:2013 Plastics — Thermoplastic materials — Determination of Vicat softening temperature (VST)
BS EN ISO 2039-2:2000 Determination of Rockwell hardness. Rockwell hardness Rockwell hardness
IEC 60216-1:2013 Electrical insulating materials - Thermal endurance properties - Part 1: Ageing procedures and evaluation of test results
ISO 7823-1:2003 Plastics — Poly(methyl methacrylate) sheets — Types, dimensions and characteristics — Part 1: Cast sheets
ISO 9664:1993 Adhesives Test methods for fatigue properties of structural adhesives in tensile shear
BS EN ISO 14527-2:2000 Preparation of test specimens and determination of properties
ISO 7792-2:2012 Plastics Thermoplastic polyester (TP) moulding and extrusion materials Part 2: Preparation of test specimens and determination of properties
ISO 483:2005 Plastics — Small enclosures for conditioning and testing using aqueous solutions to maintain the humidity at a constant value
ISO 10618:2004 Carbon fibre — Determination of tensile properties of resin-impregnated yarn
IEC 60695-2-12:2010+AMD1:2014 CSV Fire hazard testing - Part 2-12: Glowing/hot-wire based test methods- Glow-wire flammability index (GWFI) test method for materials
EN ISO 75-1:2013 Plastics - Determination of temperature of deflection under load - Part 1: General test method (ISO 75-1:2013)
BS EN ISO 7823-1:2003 Plastics. Poly(methyl methacrylate) sheets. Types, dimensions and characteristics Cast sheets
ISO 14130:1997 Fibre-reinforced plastic composites — Determination of apparent interlaminar shear strength by short-beam method
ISO 16396-2:2017 Plastics Polyamide (PA) moulding and extrusion materials Part 2: Preparation of test specimens and determination of properties
ISO 10350:1993 Plastics Acquisition and presentation of comparable single-point data
IEC 60695-11-20:2015 Fire hazard testing - Part 11-20: Test flames - 500 W flame test method
ISO 8536-4:2010 Infusion equipment for medical use Part 4: Infusion sets for single use, gravity feed
ISO 3375:2009 Textile glass Determination of stiffness of rovings
BS EN 14598-3:2005 Reinforced thermosetting moulding compounds. Specification for sheet moulding compound (SMC) and bulk moulding compound (BMC) Specific requirements
ISO 6603-1:2000 Plastics Determination of puncture impact behaviour of rigid plastics Part 1: Non-instrumented impact testing
ISO 9653:1998 Adhesives Test method for shear impact strength of adhesive bonds
ISO 1890:2009 Reinforcement yarns Determination of twist
ISO 1622-2:1995 Plastics Polystyrene (PS) moulding and extrusion materials Part 2: Preparation of test specimens and determination of properties
ISO 12017:1995 Plastics Poly(methyl methacrylate) double- and triple-skin sheets Test methods
BS EN ISO 11833-1:2012 Plastics. Unplasticized poly(vinyl chloride) sheets. Types, dimensions and characteristics Sheets of thickness not less than 1 mm
UNE-EN ISO 13274:2014 Packaging - Transport packaging for dangerous goods - Plastics compatibility testing for packaging and IBCs (ISO 13274:2013)
ONORM EN ISO 75-1 : 2013 PLASTICS - DETERMINATION OF TEMPERATURE OF DEFLECTION UNDER LOAD - PART 1: GENERAL TEST METHOD (ISO 75-1:2013)
IEC 60455-3-8:2013 Resin based reactive compounds used for electrical insulation - Part 3: Specifications for individual materials - Sheet 8: Resins for cable accessories
UNE-EN ISO 14125:1999 FIBRE-REINFORCED PLASTICS COMPOSITES. DETERMINATION OF FLEXURAL PROPERTIES (ISO 14125:1998)
I.S. EN ISO 75-1:2013 PLASTICS - DETERMINATION OF TEMPERATURE OF DEFLECTION UNDER LOAD - PART 1: GENERAL TEST METHOD (ISO 75-1:2013)
ISO 9142:2003 Adhesives Guide to the selection of standard laboratory ageing conditions for testing bonded joints
ISO 8256:2004 Plastics — Determination of tensile-impact strength
ISO 11542-2:1998 Plastics Ultra-high-molecular-weight polyethylene (PE-UHMW) moulding and extrusion materials Part 2: Preparation of test specimens and determination of properties
ISO 25137-2:2009 Plastics Sulfone polymer moulding and extrusion materials Part 2: Preparation of test specimens and determination of properties
ISO 180:2000 Plastics Determination of Izod impact strength
BS EN ISO 11357-1:2016 Plastics. Differential scanning calorimetry (DSC) General principles
ISO 14526-2:1999 Plastics Phenolic powder moulding compounds (PF-PMCs) Part 2: Preparation of test specimens and determination of properties
ISO 8986-2:2009 Plastics Polybutene-1 (PB-1) moulding and extrusion materials Part 2: Preparation of test specimens and determination of properties
BS EN 1966:2009 Structural adhesives. Characterization of a surface by measuring adhesion by means of the three point bending method
ISO 4599:1986 Plastics Determination of resistance to environmental stress cracking (ESC) Bent strip method
ISO 7822:1990 Textile glass reinforced plastics — Determination of void content — Loss on ignition, mechanical disintegration and statistical counting methods
ISO 9988-2:2006 Plastics Polyoxymethylene (POM) moulding and extrusion materials Part 2: Preparation of test specimens and determination of properties
UNE-EN ISO 3344:1998 REINFORCEMENT PRODUCTS. DETERMINATION OF MOISTURE CONTENT. (ISO 3344:1997).
BS EN ISO 9054:1999 Cellular plastics, rigid. Test methods for self-skinned high-density materials
BS EN ISO 10352:2010 Fibre-reinforced plastics. Moulding compounds and prepregs. Determination of mass per unit area
DIN EN ISO 2039-1 E : 2003 PLASTICS - DETERMINATION OF HARDNESS - PART 1: BALL INDENTATION METHOD
BS EN ISO 179-1:2010 Plastics. Determination of Charpy impact properties Non-instrumented impact test
BS EN ISO 13927:2015 Plastics. Simple heat release test using a conical radiant heater and a thermopile detector
ISO 14126:1999 Fibre-reinforced plastic composites — Determination of compressive properties in the in-plane direction
UNE-EN ISO 11403-3:2014 Plastics - Acquisition and presentation of comparable multipoint data - Part 3: Environmental influences on properties (ISO 11403-3:2014)
EN ISO 11357-2:2014 Plastics - Differential scanning calorimetry (DSC) - Part 2: Determination of glass transition temperature and glass transition step height (ISO 11357-2:2013)
ISO 4651:1988 Cellular rubbers and plastics — Determination of dynamic cushioning performance
BS EN ISO 7822:1999 Textile glass reinforced plastics. Determination of void content. Loss on ignition, mechanical disintegration and statistical counting methods
BS EN ISO 11501:2004 Plastics. Film and sheeting. Determination of dimensional change on heating Determination of dimensional change on heating of film and sheeting
BS EN ISO 10964:1997 Adhesives. Determination of torque strength of anaerobic adhesives on threaded fasteners
UNE-EN 60695-11-20:2016 Fire hazard testing - Part 11-20: Test flames - 500 W flame test methods
BS EN ISO 14663-2:2006 Plastics. Ethylene/vinyl alcohol (EVOH) copolymer moulding and extrusion materials Preparation of test specimens and determination of properties
UNE-EN ISO 6383-1:2016 Plastics - Film and sheeting - Determination of tear resistance - Part 1: Trouser tear method (ISO 6383-1:2015)
12/30260913 DC : 0 BS EN 4717 - AEROSPACE SERIES - POLYETHERKETONE WITH 55% CONTINUOUS CARBON FIBRE BY VOLUME (PEEK-CF55)
UNE-EN 60695-11-10:2014 Fire hazard testing - Part 11-10: Test flames - 50 W horizontal and vertical flame test methods
UNE-EN 12586:2008 Child use and care articles - Soother holder - Safety requirements and test methods
UNE-EN ISO 11357-1:2017 Plastics - Differential scanning calorimetry (DSC) - Part 1: General principles (ISO 11357-1:2016)
BS EN ISO 11667:2000 Fibre reinforced plastics. Moulding compounds and prepregs. Determination of resin, reinforcement-fibre and mineral-filler content. Dissolution methods
BS EN ISO 14526-2:2000 Plastics. Phenolic powder moulding compounds (PF-PMCs) Preparation of test specimens and determination of properties
BS EN 4691-1:2017 Aerospace series. Tie rod with integrated bolts Technical specification
ISO 899-2:2003 Plastics Determination of creep behaviour Part 2: Flexural creep by three-point loading
BS EN ISO 6383-1:2015 Plastics. Film and sheeting. Determination of tear resistance Trouser tear method
UNE-EN ISO 4892-1:2017 Plastics - Methods of exposure to laboratory light sources - Part 1: General guidance (ISO 4892-1:2016)
UNE-EN ISO 845:2010 Cellular plastics and rubbers - Determination of apparent density (ISO 845:2006)
ISO 22088-4:2006 Plastics Determination of resistance to environmental stress cracking (ESC) Part 4: Ball or pin impression method
BS EN ISO 4651 : 1995 CELLULAR RUBBERS AND PLASTICS - DETERMINATION OF DYNAMIC CUSHIONING PERFORMANCE
EN ISO 10618 : 2004 CARBON FIBRE - DETERMINATION OF TENSILE PROPERTIES OF RESIN-IMPREGNATED YARN
EN 14447:2005 Fibre reinforced plastics - Glass mat reinforced thermoplastics (GMT) - Determination of flowability and solidification
EN ISO 11403-2:2012 Plastics - Acquisition and presentation of comparable multipoint data - Part 2: Thermal and processing properties (ISO 11403-2:2012)
EN ISO 4892-1:2016 Plastics - Methods of exposure to laboratory light sources - Part 1: General guidance (ISO 4892-1:2016)
EN 14879-3:2006 Organic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media - Part 3: Coatings on concrete components
EN 14879-2:2006 Organic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media - Part 2: Coatings on metallic components
EN 14869-1:2011 Structural adhesives - Determination of shear behaviour of structural bonds - Part 1: Torsion test method using butt-bonded hollow cylinders (ISO 11003-1:2001, modified)
EN ISO 1163-2 : 1999 PLASTICS - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
EN ISO 2898-2:2008 Plastics - Plasticized poly(vinyl chloride) (PVC-P) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 2898-2:2008)
EN 1794-3:2016 Road traffic noise reducing devices - Non-acoustic performance - Part 3: Reaction to fire - Burning behaviour of noise reducing devices and classification
EN ISO 9664:1995 Adhesives - Test methods for fatigue properties of structural adhesives in tensile shear (ISO 9664:1993)
EN ISO 15252-2 : 1999 PLASTICS - EPOXY POWDER MOULDING COMPOUNDS (EP-PMCS) - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
NF EN ISO 11339 : 2010 ADHESIVES - T-PEEL TEST FOR FLEXIBLE-TO-FLEXIBLE BONDED ASSEMBLIES
EN 16245-3:2013 Fibre-reinforced plastic composites - Declaration of raw material characteristics - Part 3: Specific requirements for fibre
ONORM EN ISO 13468-2 : 2006 PLASTICS - DETERMINATION OF THE TOTAL LUMINOUS TRANSMITTANCE OF TRANSPARENT MATERIALS - PART 2: DOUBLE-BEAM INSTRUMENT
EN ISO 1135-3:2017 Transfusion equipment for medical use - Part 3: Blood-taking sets for single use (ISO 1135-3:2016)
EN ISO 8986-2:2009 Plastics - Polybutene-1 (PB-1) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 8986-2:2009)
EN ISO 10964 : 1997 ADHESIVES - DETERMINATION OF TORQUE STRENGTH OF ANAEROBIC ADHESIVES ON THREADED FASTENERS
EN ISO 6252 : 1997 PLASTICS - DETERMINATION OF ENVIRONMENTAL STRESS CRACKING (ESC) - CONSTANT-TENSILE-STRESS METHOD
EN 1400-2 : 2002 CHILD USE AND CARE ARTICLES - SOOTHERS FOR BABIES AND YOUNG CHILDREN - MECHANICAL REQUIREMENTS AND TESTS
EN ISO 15526-2:2004 Plastics - Polyketone (PK) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 15526-2:2000)
EN ISO 4599 : 1996 PLASTICS - DETERMINATION OF RESISTANCE TO ENVIRONMENTAL STRESS CRACKING (ESC) - BENT STRIP METHOD
EN 13696:2008 Wood flooring - Test methods to determine elasticity and resistance to wear and impact resistance
EN 16153:2013+A1:2015 Light transmitting flat multiwall polycarbonate (PC) sheets for internal and external use in roofs, walls and ceilings - Requirements and test methods
EN 14598-2:2005/AC:2006 REINFORCED THERMOSETTING MOULDING COMPOUNDS - SPECIFICATION FOR SHEET MOULDING COMPOUND (SMC) AND BULK MOULDING COMPOUND (BMC) - PART 2: METHODS OF TEST AND GENERAL REQUIREMENTS
EN 15466-2:2009 Primers for cold and hot applied joint sealants - Part 2: Determination of resistance against alkali
EN ISO 22007-6:2015 Plastics - Determination of thermal conductivity and thermal diffusivity - Part 6: Comparative method for low thermal conductivities using a temperature-modulation technique (ISO 22007-6:2014)
EN ISO 1874-2:2012 Plastics - Polyamide (PA) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 1874-2:2012)
EN ISO 2039-2 : 1999 PLASTICS - DETERMINATION OF HARDNESS - PART 2 - ROCKWELL HARDNESS
EN 13592:2017 Plastics sacks for household waste collection - Types, requirements and test methods
EN ISO 14529-2 : 1999 PLASTICS - MELAMINE/PHENOLIC POWDER MOULDING COMPOUNDS (MP-PMCS) - PART 2 - PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
EN ISO 15310:2005 Fibre-reinforced plastic composites - Determination of the in-plane shear modulus by the plate twist method (ISO 15310:1999)
EN 1464:2010 Adhesives - Determination of peel resistance of adhesive bonds - Floating roller method
EN ISO 5659-2:2017 Plastics - Smoke generation - Part 2: Determination of optical density by a single-chamber test (ISO 5659-2:2017)
EN ISO 12086-2:2006/AC:2009 PLASTICS - FLUOROPOLYMER DISPERSIONS AND MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
EN ISO 3344 : 1997 REINFORCEMENT PRODUCTS - DETERMINATION OF MOISTURE CONTENT
EN ISO 11468 : 1999 PLASTICS - PREPARATION OF PVC PASTES FOR TEST PURPOSES - DISSOLVER METHOD
EN 14869-2:2011 Structural adhesives - Determination of shear behaviour of structural bonds - Part 2: Thick adherends shear test (ISO 11003-2:2001, modified)
EN ISO 14130 : 1997 FIBRE-REINFORCED PLASTIC COMPOSITES - DETERMINATION OF APPARENT INTERLAMINAR SHEAR STRENGTH BY SHORT-BEAM METHOD
UNI EN ISO 11339 : 2010 ADHESIVES - T-PEEL TEST FOR FLEXIBLE-TO- FLEXIBLE BONDED ASSEMBLIES
EN ISO 9163:2005 Textile glass - Rovings - Manufacture of test specimens and determination of tensile strength of impregnated rovings (ISO 9163:2005)
EN ISO 22088-4:2006 Plastics - Determination of resistance to environmental stress cracking (ESC) - Part 4: Ball or pin impression method (ISO 22088-4:2006)
EN ISO 4577 : 1999 PLASTICS - POLYPROPYLENE AND PROPYLENE-COPOLYMERS - DETERMINATION OF THERMAL OXIDATIVE STABILITY IN AIR - OVEN METHOD
EN 1965-2:2011 Structural adhesives - Corrosion - Part 2: Determination and classification of corrosion to a brass substrate
EN ISO 14126:1999/AC:2002 FIBRE-REINFORCED PLASTIC COMPOSITES - DETERMINATION OF COMPRESSIVE PROPERTIES IN THE IN-PLANE DIRECTION
EN ISO 483:2005 Plastics - Small enclosures for conditioning and testing using aqueous solutions to maintain the humidity at a constant value (ISO 483:2005)
EN 28031 : 1993 RUBBER AND PLASTICS HOSES AND HOSE ASSEMBLIES - DETERMINATION OF ELECTRICAL RESISTANCE
EN 16776:2016 Resilient floor coverings - Heterogeneous polyurethane floor coverings - Specification
EN ISO 179-1:2010 Plastics - Determination of Charpy impact properties - Part 1: Non-instrumented impact test (ISO 179-1:2010)
EN ISO 4651:1995/A1:2008 CELLULAR RUBBERS AND PLASTICS - DETERMINATION OF DYNAMIC CUSHIONING PERFORMANCE
EN ISO 11248 : 1999 Plastics - Thermosetting moulding materials - Evaluation of short-term performance at elevated temperatures (ISO 11248:1993)
EN ISO 8580 : 1995 RUBBER AND PLASTICS HOSES - DETERMINATION OF ULTRA-VIOLET RESISTANCE UNDER STATIC CONDITIONS
EN ISO 10350-1:2017 Plastics - Acquisition and presentation of comparable single-point data - Part 1: Moulding materials (ISO 10350-1:2017)
EN ISO 9054 : 1999 CELLULAR PLASTICS, RIGID - TEST METHODS FOR SELF-SKINNED, HIGH-DENSITY MATERIALS
EN 15336:2007 Adhesives - Determination of the time to rupture of bonded joints under static load ( ISO 15109:1998 modified)
EN ISO 1889:2009 Reinforcement yarns - Determination of linear density (ISO 1889:2009)
EN ISO 16396-2:2017 Plastics - Polyamide (PA) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 16396-2:2017)
EN ISO 3672-2 : 2001 PLASTICS - UNSATURATED-POLYESTER RESINS (UP-R) - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
EN ISO 877 : 1996
EN ISO 11833-2:2006 Plastics - Unplasticized poly(vinyl chloride) sheets - Types, dimensions and characteristics - Part 2: Sheets of thickness less than 1 mm (ISO 11833-2:1998)
EN ISO 877-1:2010 Plastics - Methods of exposure to solar radiation - Part 1: General guidance (ISO 877-1:2009)
EN ISO 11358-1:2014 Plastics - Thermogravimetry (TG) of polymers - Part 1: General principles (ISO 11358-1:2014)
EN ISO 11358 : 1997 PLASTICS - THERMOGRAVIMETRY (TG) OF POLYMERS - GENERAL PRINCIPLES
EN 14879-6:2009 Organic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media - Part 6: Combined linings with tile and brick layers
EN ISO 30013:2011 Rubber and plastics hoses - Methods of exposure to laboratory light sources - Determination of changes in colour, appearance and other physical properties (ISO 30013:2011)
EN ISO 15013:2007 Plastics - Extruded sheets of polypropylene (PP) - Requirements and test methods (ISO 15013:2007)
EN ISO 14530-2 : 1999 PLASTICS - UNSATURATED-POLYESTER POWDER MOULDING COMPOUNDS (UP-PMCS) - PART 2 - PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
EN ISO 11339:2010 Adhesives - T-peel test for flexible-to-flexible bonded assemblies (ISO 11339:2010)
EN 1465:2009 Adhesives - Determination of tensile lap-shear strength of bonded assemblies
EN ISO 9142:2003 Adhesives - Guide to the selection of standard laboratory ageing conditions for testing bonded joints (ISO 9142:2003)
EN 16465:2015 Plastics - Methods for the calibration of black-standard and white-standard thermometers and black-panel and white-panel thermometers for use in natural and artificial weathering
EN 14415:2004 Geosynthetic barriers - Test method for determining the resistance to leaching
EN ISO 604 : 2003 PLASTICS - DETERMINATION OF COMPRESSIVE PROPERTIES (ISO 604:2002)
EN 15870:2009 Adhesives - Determination of tensile strength of butt joints (ISO 6922:1987 modified)
EN 59:2016 Glass reinforced plastics - Determination of indentation hardness by means of a Barcol hardness tester
EN 1967:2002/AC:2005 STRUCTURAL ADHESIVES - EVALUATION OF THE EFFECTIVENESS OF SURFACE TREATMENT TECHNIQUES FOR ALUMINIUM USING A WET PEEL TEST IN ASSOCIATION WITH THE FLOATING ROLLER METHOD
EN ISO 7823-1:2003 Plastics - Poly(methyl methacrylate) sheets - Types, dimensions and characteristics - Part 1: Cast sheets (ISO 7823-1:2003)
EN ISO 8256:2004 Plastics - Determination of tensile-impact strength (ISO 8256:2004)
EN ISO 8510-2:2010 Adhesives - Peel test for a flexible-bonded-to-rigid test specimen assembly - Part 2: 180 degree peel (ISO 8510-2:2006)
EN ISO 20028-2:2017 Plastics - Thermoplastic polyester (TP) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 20028-2:2017)
EN ISO 16012:2015 Plastics - Determination of linear dimensions of test specimens (ISO 16012:2015)
EN ISO 6383-1:2015 Plastics - Film and sheeting - Determination of tear resistance - Part 1: Trouser tear method (ISO 6383-1:2015)
EN ISO 11667 : 1999 FIBRE-REINFORCED PLASTICS - MOULDING COMPOUNDS AND PREPREGS - DETERMINATION OF RESIN, REINFORCED-FIBRE AND MINERAL-FILLER CONTENT - DISSOLUTION METHODS
EN ISO 176 : 2005 PLASTICS - DETERMINATION OF LOSS OF PLASTICIZERS - ACTIVATED CARBON METHOD
EN ISO 1622-2 : 1999 PLASTICS - POLYSTYRENE (PS) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
EN ISO 20568-2:2017 Plastics - Fluoropolymer dispersions and moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 20568-2:2017)
EN ISO 8295 : 2004 Plastics - Film and sheeting - Determination of the coefficients of friction (ISO 8295:1995)
EN 16245-5:2013 Fibre-reinforced plastic composites - Declaration of raw material characteristics - Part 5: Specific requirements for core materials
EN ISO 2578 : 1998 PLASTICS - DETERMINATION OF TIME-TEMPERATURE LIMITS AFTER PROLONGED EXPOSURE TO HEAT
EN ISO 306:2013 Plastics - Thermoplastic materials - Determination of Vicat softening temperature (VST) (ISO 306:2013)
EN 1842:1997 Plastics - Thermoset moulding compounds (SMC - BMC) - Determination of compression moulding shrinkage
EN ISO 489:1999 PLASTICS - DETERMINATION OF REFRACTIVE INDEX
EN ISO 4894-2 : 1999 PLASTICS - STYRENE/ACRYLONITRILE (SAN) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
EN 15836-2:2010 Plastics - Plasticized poly(vinyl chloride) (PVC-P) membranes for inground swimming pools - Part 2: Reinforced membranes of nominal thickness equal to or greater than 1,5 mm
EN ISO 14528-2 : 1999 PLASTICS - MELAMINE/PHENOLIC POWDER MOULDING COMPOUNDS (MP-PMCS) - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
EN 15466-3:2009 Primers for cold and hot applied joint sealants - Part 3: Determination of solids content and evaporation behaviour of volatiles
EN ISO 868:2003 Plastics and ebonite - Determination of indentation hardness by means of a durometer (Shore hardness) (ISO 868:2003)
EN ISO 6603-1 : 2000 PLASTICS - DETERMINATION OF PUNCTURE IMPACT BEHAVIOUR OF RIGID PLASTICS - PART 1: NON-INSTRUMENTED IMPACT TESTING
EN ISO 4600 : 1997 PLASTICS - DETERMINATION OF ENVIRONMENTAL STRESS CRACKING (ESC) - BALL OR PIN IMPRESSION METHOD
EN ISO 4589-2:2017 Plastics - Determination of burning behaviour by oxygen index - Part 2: Ambient-temperature test (ISO 4589-2:2017)
I.S. EN ISO 489:1999 PLASTICS - DETERMINATION OF REFRACTIVE INDEX
EN ISO 527-1:2012 Plastics - Determination of tensile properties - Part 1: General principles (ISO 527-1:2012)
EN ISO 13927:2015 Plastics - Simple heat release test using a conical radiant heater and a thermopile detector (ISO 13927:2015)
EN ISO 6383-2:2004 Plastics - Film and sheeting - Determination of tear resistance - Part 2: Elmendorf method (ISO 6383-2:1983)
EN ISO 6186:1998 Plastics - Determination of pourability (ISO 6186:1998)
EN ISO 11833-1:2012 Plastics - Unplasticized poly(vinyl chloride) sheets - Types, dimensions and characteristics - Part 1: Sheets of thickness not less than 1 mm (ISO 11833-1:2012)
EN ISO 7823-2 : 2003 PLASTICS - POLY(METHYL METHACRYLATE) SHEETS - TYPES, DIMENSIONS AND CHARACTERISTICS - PART 2: EXTRUDED SHEETS
EN ISO 9653 : 2000 Adhesives - Test method for shear impact strength of adhesive bonds (ISO 9653:1998)
EN ISO 13445:2006 Adhesives - Determination of shear strength of adhesive bonds between rigid substrates by the block-shear method (ISO 13445:2003)
EN 753-3 : 1999 IDENTIFICATION CARD SYSTEMS - INTERSECTION THIN FLEXIBLE CARDS - TEST METHODS
EN 14598-3:2005 Reinforced thermosetting moulding compounds - Specification for Sheet Moulding Compound (SMC) and Bulk Moulding Compound (BMC) - Part 3: Specific requirements
EN 455-4:2009 Medical gloves for single use - Part 4: Requirements and testing for shelf life determination
EN ISO 11343:2005 Adhesives - Determination of dynamic resistance to cleavage of high-strength adhesive bonds under impact conditions - Wedge impact method (ISO 11343:2003)
EN ISO 3146:2000/AC:2003 PLASTICS - DETERMINATION OF MELTING BEHAVIOUR (MELTING TEMPERATURE OR MELTING RANGE) OF SEMI-CRYSTALLINE POLYMERS BY CAPILLARY TUBE AND POLARIZING-MICROSCOPE METHODS
EN ISO 1135-5:2015 Transfusion equipment for medical use - Part 5: Transfusion sets for single use with pressure infusion apparatus (ISO 1135-5:2015)
EN ISO 14129 : 1997 FIBRE-REINFORCED PLASTIC COMPOSITES - DETERMINATION OF THE IN-PLANE SHEAR STRESS/SHEAR STRAIN RESPONSE, INCLUDING THE IN-PLANE SHEAR MODULUS AND STRENGTH, BY THE +/- 45 DEGREES TENSION TEST METHOD (ISO 14129:1997)
EN ISO 175:2010 Plastics - Methods of test for the determination of the effects of immersion in liquid chemicals (ISO 175:2010)
EN ISO 11501:2004 Plastics - Film and sheeting - Determination of dimensional change on heating (ISO 11501:1995)
EN ISO 15015:2011 Plastics - Extruded sheets of impact-modified acrylonitrile-styrene copolymers (ABS, AEPDS and ASA) - Requirements and test methods (ISO 15015:2011)
EN ISO 11357-1:2016 Plastics - Differential scanning calorimetry (DSC) - Part 1: General principles (ISO 11357-1:2016)
EN 1389:2003 (edition 2) Advanced technical ceramics - Ceramic composites - Physical properties - Determination of density and apparent porosity
EN ISO 9773:1998/A1:2003 Plastics - Determination of burning behaviour of thin flexible vertical specimens in contact with a small-flame ignition source - Amendment 1: Specimens (ISO 9773:1998/Amd 1:2003)
EN ISO 22007-4:2017 Plastics - Determination of thermal conductivity and thermal diffusivity - Part 4: Laser flash method (ISO 22007-4:2017)
EN ISO 7792-2:2012 Plastics - Thermoplastic polyester (TP) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 7792-2:2012)
EN ISO 13468-1:1996 PLASTICS - DETERMINATION OF TOTAL LUMINOUS TRANSMITTANCE OF TRANSPARENT MATERIALS - PART 1: SINGLE-BEAM INSTRUMENT
EN ISO 7822 : 1999 TEXTILE GLASS REINFORCED PLASTICS - DETERMINATION OF VOID CONTENT - LOSS ON IGNITION, MECHANICAL DISINTEGRATION AND STATISTICAL COUNTING METHODS
EN 16245-4:2013 Fibre-reinforced plastic composites - Declaration of raw material characteristics - Part 4: Specific requirements for fabrics
EN 15865:2009 Adhesives - Determination of torque strength of anaerobic adhesives on threaded fasteners (ISO 10964:1993 modified)
EN 1966:2009 Structural adhesives - Characterization of a surface by measuring adhesion by means of the three point bending method
EN 14879-4:2007 Organic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media - Part 4: Linings on metallic components
EN ISO 14527-2 : 1999 PLASTICS - UREA-FORMALDEHYDE AND UREA/MELAMINE-FORMALDEHYDE POWDER MOULDING COMPOUNDS (UF- AND UF/MF-PMCS) - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
EN 28510-1:2014 Adhesives - Peel test for a flexible-bonded-to-rigid test specimen assembly - Part 1: 90º peel
EN ISO 177:2017 Plastics - Determination of migration of plasticizers (ISO 177:2016)
EN ISO 25137-2:2017 Plastics - Sulfone polymer moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 25137-2:2009)
EN ISO 7765-1:2004 Plastics film and sheeting - Determination of impact resistance by the free-falling dart method - Part 1: Staircase methods (ISO 7765-1:1988)
UNI EN ISO 15527 : 2013 PLASTICS - COMPRESSION-MOULDED SHEETS OF POLYETHYLENE (PE-UHMW, PE-HD) - REQUIREMENTS AND TEST METHODS
02/121542 DC : DRAFT MAR 2002 ISO/DIS 11403-2 - PLASTICS - ACQUISITION AND PRESENTATION OF COMPARABLE MULTIPOINT DATA - PART 2: THERMAL AND PROCESSING PROPERTIES
BS 7658-1:1993 Carbon fibre Method for determination of density
BS EN ISO 11357-2:2014 Plastics. Differential scanning calorimetry (DSC) Determination of glass transition temperature and glass transition step height
BS ISO 15988:2003 Plastics. Film and sheeting. Biaxially oriented poly(ethylene terephthalate) (PET) films
PREN ISO 6721-1 : DRAFT 2011 PLASTICS - DETERMINATION OF DYNAMIC MECHANICAL PROPERTIES - PART 1: GENERAL PRINCIPLES
DIN EN 15870:2009-08 ADHESIVES - DETERMINATION OF TENSILE STRENGTH OF BUTT JOINTS
13/30238193 DC : DRAFT DEC 2013 BS ISO 16616 - TEST METHODS FOR NATURAL FIBER-REINFORCED PLASTIC COMPOSITE (NFC) DECK BOARDS
BS EN ISO 2818 : 1997 PLASTICS - PREPARATION OF TEST SPECIMENS BY MACHINING
ISO 17467-1:2012 Plastics piping systems for the supply of gaseous fuels Unplasticized polyamide (PA-U) piping systems jointed by solvent cement Part 1: General
06/30130313 DC : DRAFT MAR 2006 ISO 23559 - PLASTICS - FILM AND SHEETING - GUIDE FOR THE TESTING OF THERMOPLASTIC FILMS
BS ISO 5660-1:2015 Reaction-to-fire tests. Heat release, smoke production and mass loss rate Heat release rate (cone calorimeter method) and smoke production rate (dynamic measurement)
BS ISO 16365-2:2014 Plastics. Thermoplastic polyurethanes for moulding and extrusion Preparation of test specimens and determination of properties
PREN 14350-1 : DRAFT 2001 CHILD USE AND CARE ARTICLES - DRINKING EQUIPMENT - PART 1: GENERAL AND MECHANICAL REQUIREMENTS AND TESTS
17/30348286 DC : 0 BS EN 17098-1 - PLASTICS - BARRIER FILMS FOR AGRICULTURAL AND HORTICULTURAL SOIL DISINFECTION BY FUMIGATION - PART 1: SPECIFICATIONS FOR BARRIER FILMS
11/30242077 DC : DRAFT MAY 2011 BS ISO 16486-3 - PLASTICS PIPING SYSTEMS FOR THE SUPPLY OF GASEOUS FUELS - UNPLASTICIZED POLYAMIDE (PA-U) PIPING SYSTEMS WITH FUSION JOINTING AND MECHANICAL JOINTING - PART 3: FITTINGS
UNE-EN 1794-3:2016 Road traffic noise reducing devices - Non-acoustic performance - Part 3: Reaction to fire - Burning behaviour of noise reducing devices and classification
BS EN 62326-20:2016 Printed boards Printed circuit boards for high-brightness LEDs
05/30130526 DC : DRAFT MAR 2005 ISO 22621-2 - PLASTICS PIPING SYSTEMS FOR THE SUPPLY OF GASEOUS FUELS FOR MAXIMUM OPERATING UP TO AND INCLUDING 2 MPA (20 BAR) - POLYAMIDE (PA) - PART 2: PIPES
I.S. EN ISO 8580:1995 RUBBER AND PLASTICS HOSES - DETERMINATION OF ULTRA-VIOLET RESISTANCE UNDER STATIC CONDITIONS
UNI EN 15466-3 : 2009 PRIMERS FOR COLD AND HOT APPLIED JOINT SEALANTS - PART 3: DETERMINATION OF SOLIDS CONTENT AND EVAPORATION BEHAVIOUR OF VOLATILES
BS EN 1794-3:2016 Road traffic noise reducing devices. Non-acoustic performance Reaction to fire. Burning behaviour of noise reducing devices and classification
16/30315531 DC : 0 BS ISO 4582 - PLASTICS - DETERMINATION OF CHANGES IN COLOUR AND VARIATIONS IN PROPERTIES AFTER EXPOSURE TO DAYLIGHT UNDER GLASS, NATURAL WEATHERING OR LABORATORY LIGHT SOURCES
17/30348730 DC : 0 BS EN 17072 - CHILD CARE ARTICLES - BATH TUBS AND STANDS - SAFETY REQUIREMENTS AND TEST METHODS
I.S. EN 15534-1:2014 COMPOSITES MADE FROM CELLULOSE-BASED MATERIALS AND THERMOPLASTICS (USUALLY CALLED WOOD-POLYMER COMPOSITES (WPC) OR NATURAL FIBRE COMPOSITES (NFC)) - PART 1: TEST METHODS FOR CHARACTERISATION OF COMPOUNDS AND PRODUCTS
14/30298583 DC : 0 BS EN 13121-3 - GRP TANKS AND VESSELS FOR USE ABOVE GROUND - PART 3: DESIGN AND WORKMANSHIP
BS EN ISO 1135-3:2017 Transfusion equipment for medical use Blood-taking sets for single use
03/112821 DC : DRAFT AUG 2003 ISO 21509 - PLASTICS AND EBONITE - VERIFICATION OF SHORE HARDNESS DUROMETERS
BS EN 16245-4:2013 Fibre-reinforced plastic composites. Declaration of raw material characteristics Specific requirements for fabrics
15/30304269 DC : 0 BS EN 16727-1 - RAILWAY APPLICATIONS - TRACK - NOISE BARRIERS AND RELATED DEVICES ACTING ON AIRBORNE SOUND PROPAGATION - NON-ACOUSTIC PERFORMANCE - PART 1: MECHANICAL PERFORMANCE UNDER STATIC LOADINGS - CALCULATION AND TEST METHODS
UNE-EN ISO 20568-2:2017 Plastics - Fluoropolymer dispersions and moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 20568-2:2017)
15/30318279 DC : 0 BS ISO 19322 - RESILIENT FLOOR COVERINGS - SPECIFICATION FOR FLOOR COVERINGS BASED ON THERMOPLASTIC POLYMER
06/30130317 DC : DRAFT JULY 2006 ISO 11833-1 - PLASTICS - UNPLASTICIZED POLY (VINYL CHLORIDE) SHEETS - TYPES, DIMENSIONS AND CHARACTERISTICS
EN 62788-1-5:2016/AC:2017-11 MEASUREMENT PROCEDURES FOR MATERIALS USED IN PHOTOVOLTAIC MODULES - PART 1-5: ENCAPSULANTS - MEASUREMENT OF CHANGE IN LINEAR DIMENSIONS OF SHEET ENCAPSULATION MATERIAL RESULTING FROM APPLIED THERMAL CONDITIONS (IEC 62788-1-5:2016/COR1:2017)
08/30182090 DC : DRAFT MAY 2008 BS EN ISO 11357-1 - PLASTICS - DIFFERENTIAL SCANNING CALORIMETRY (DSC) - PART 1: GENERAL PRINCIPLES
I.S. EN ISO 4599:1997 PLASTICS - DETERMINATION OF RESISTANCE TO ENVIRONMENTAL STRESS CRACKING (ESC) - BENT STRIP METHOD
BS ISO 13636:2012 Plastics. Film and sheeting. Non-oriented poly(ethylene terephthalate) (PET) sheets
15/30323694 DC : 0 BS EN 62631-2-1 - DIELECTRIC AND RESISTIVE PROPERTIES OF SOLID INSULATING MATERIALS - PART 2-1: RELATIVE PERMITTIVITY AND DISSIPATION FACTOR - TECHNICAL FREQUENCIES (0.1 HZ - 10 MHZ), AC METHODS
ONORM EN ISO 1183-1 : 2013 PLASTICS - METHODS FOR DETERMINING THE DENSITY OF NON-CELLULAR PLASTICS - PART 1: IMMERSION METHOD, LIQUID PYKNOMETER METHOD AND TITRATION METHOD (ISO 1183-1:2012)
ISO 8510-2:2006 Adhesives Peel test for a flexible-bonded-to-rigid test specimen assembly Part 2: 180 peel
BS ISO 16525-6:2014 Adhesives. Test methods for isotropic electrically conductive adhesives Determination of pendulum-type shear impact
15/30302738 DC : 0 BS ISO 19213 - IMPLANTS FOR SURGERY - TEST METHODS OF MATERIAL FOR USE AS A CORTICAL BONE MODEL
DIN EN ISO 11357-3 E : 2013 PLASTICS - DIFFERENTIAL SCANNING CALORIMETRY (DSC) - PART 3: DETERMINATION OF TEMPERATURE AND ENTHALPY OF MELTING AND CRYSTALLIZATION (ISO 11357-3:2011)
BS 2782-10:Method 1008D:1996 Methods of testing plastics. Glass reinforced plastics Determination of apparent interlaminar shear strength on rods made of roving-reinforced resins
BS EN 15466-2:2009 Primers for cold and hot applied joint sealants Determination of resistance against alkali
BS 2782-3 Method 370:1990 Methods of testing plastics. Mechanical properties Determination of resistance to wear by abrasive wheels
BS ISO 12817:2013 Fibre-reinforced plastic composites. Determination of open-hole compression strength
ISO 15988:2003 Plastics — Film and sheeting — Biaxially oriented poly(ethylene terephthalate) (PET) films
BS 2782-5:Method 540D:1995 Methods of testing plastics. Optical and colour properties, weathering Methods of exposure to laboratory light sources. General guidance
ISO 18319:2015 Fibre-reinforced polymer (FRP) reinforcement for concrete structures — Specifications of FRP sheets
ISO 11343:2003 Adhesives Determination of dynamic resistance to cleavage of high-strength adhesive bonds under impact conditions Wedge impact method
ISO 15034:1999 Composites Prepregs Determination of resin flow
ISO 24335:2006 Laminate floor coverings — Determination of impact resistance
UNE-ISO 1268-4:2012 Fibre-reinforced plastics -- Metho