• There are no items in your cart
We noticed you’re not on the correct regional site. Switch to our AMERICAS site for the best experience.
Dismiss alert

ISO 3:1973

Current
Current

The latest, up-to-date edition.

Preferred numbers Series of preferred numbers
Available format(s)

Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users

Language(s)

English, French

Published date

01-04-1973

Preferred numbers are the conventionally rounded of term values of geometrical series, including the integral powers of 10 and having as ratios special factors in accordance with the specified tables. Basic, expectional, R 80 and derived series are designated.

DocumentType
Standard
Pages
4
PublisherName
International Organization for Standardization
Status
Current

Standards Relationship
AS 2752-1985 Identical
NBN C 83 200 : 1984 Identical
NEN 3070 : 1977 Identical
SANS 742 : 1ED 2008(R2016) Identical
BS 2045:1965 Identical
NBN E 48 007 : 1983 Identical
NFX 01 001 : 1967 Similar to
NBN C 83 160 : 1984 Identical
BIS IS 1076-1 : 1985(R2016) Identical
NBN C 83 250 : 1984 AMD 1 1988 Identical
NS 379 : 2ED 1972 Similar to
AS 2751 SUPP 2-1989 Identical

UNE-EN ISO 15494:2016 Plastics piping systems for industrial applications - Polybutene (PB), polyethylene (PE), polyethylene of raised temperature resistance (PE-RT), crosslinked polyethylene (PE-X), polypropylene (PP) - Metric series for specifications for components and the system (ISO 15494:2015)
I.S. 329:2015 GAS DISTRIBUTION MAINS (EDITION 3)
ISO 11299-3:2011 Plastics piping systems for renovation of underground gas supply networks Part 3: Lining with close-fit pipes
BS EN 60317-0-6:2001 Specifications for particular types of winding wires General requirements. Glass-fibre wound resin or varnish impregnated, bare or enamelled round copper wire
BS EN 140200:1997 Harmonized system of quality assessment for electronic components. Sectional specification: fixed power resistors
12/30255878 DC : 0 BS ISO 17885 - PLASTICS PIPING SYSTEMS - MECHANICAL FITTINGS FOR PRESSURE PIPING SYSTEMS - SPECIFICATIONS
96/209014 DC : DRAFT JUL 1996 PREN 132900 - SECTIONAL SPECIFICATION - HIGH VOLTAGE CERAMIC CAPACITORS
BS EN 130200:1993 Harmonized system of quality assessment for electronic components. Sectional specification: fixed tantalum capacitors with non-solid or solid electrolyte
BS ISO 8085-1:2001 Polyethylene fittings for use with polyethylene pipes for the supply of gaseous fuels. Metric series. Specifications Fittings for socket fusion using heated tools
BS ISO 8535-1:2016 Diesel engines. Steel tubes for high-pressure fuel injection pipes Requirements for seamless cold-drawn single-wall tubes
DIN EN ISO 4064-1:2016-09 (Draft) WATER METERS FOR COLD POTABLE WATER AND HOT WATER - PART 1: METROLOGICAL AND TECHNICAL REQUIREMENTS (ISO 4064-1:2014)
07/30164841 DC : 0 EN 4199-004 - AEROSPACE SERIES - BONDING STRAPS FOR AIRCRAFT - PART 004: ROUND BONDING STRAPS, COPPER, TIN PLATED -65 DEGREE C UP TO 150 DEGREE C AND NICKEL PLATED -65 DEGREE C UP TO 260 DEGREE C - PRODUCT STANDARD
ISO 8572:1991 Pipes and fittings made of glass-reinforced thermosetting plastics (GRP) — Definitions of terms relating to pressure, including relationships between them, and terms for installation and jointing
11/30217189 DC : 0 BS EN ISO 4064-1 - WATER METERS INTENDED FOR THE METERING OF COLD POTABLE WATER AND HOT WATER - PART 1: METROLOGICAL AND TECHNICAL REQUIREMENTS
08/30092426 DC : DRAFT JULY 2008 BS ISO 12162 - THERMOPLASTICS MATERIALS FOR PIPES AND FITTINGS FOR PRESSURE APPLICATIONS - CLASSIFICATION, DESIGNATION COEFFICIENT, AND DESIGNATION
I.S. EN 60384-19:2015 FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 19: SECTIONAL SPECIFICATION: FIXED METALLIZED POLYETHYLENE-TEREPHTHALATE FILM DIELECTRIC SURFACE MOUNT D.C. CAPACITORS
AIIM MS51 : 0 MICROGRAPHICS - ISO RESOLUTION TEST CHART NO 2 - DESCRIPTION AND USE
17/30358564 DC : 0 BS ISO 8100-30 - LIFTS FOR THE TRANSPORT OF PERSONS AND GOODS - PART 30: CLASS 1, 2, 3 AND 4 LIFTS INSTALLATION
CEI EN 60947-7-3 : 2011 LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 7-3: ANCILLARY EQUIPMENT - SAFETY REQUIREMENTS FOR FUSE TERMINAL BLOCKS
03/316256 DC : DRAFT OCT 2003 EN ISO 8469 - SMALL CRAFT - NON-FIRE-RESISTANT FUEL HOSES
BS EN ISO 11299-3:2013 Plastics piping systems for renovation of underground gas supply networks Lining with close-fit pipes
IEC 61045-1:1991 Fixed film resistor networks for use in electronic equipment - Part 1: Generic specification
UNI EN ISO 21003-1 : 2009 MULTILAYER PIPING SYSTEMS FOR HOT AND COLD WATER INSTALLATIONS INSIDE BUILDINGS - PART 1: GENERAL
17/30363224 DC : 0 BS EN 60317-0-8 - SPECIFICATIONS FOR PARTICULAR TYPES OF WINDING WIRES - PART 0-8: GENERAL REQUIREMENTS - POLYESTER GLASS FIBRE WOUND, RESIN OR VARNISH IMPREGNATED OR NOT IMPREGNATED, BARE OR ENAMELLED RECTANGULAR COPPER WIRE
08/30174014 DC : DRAFT JUNE 2008 BS ISO 11298-3 - PLASTICS PIPING SYSTEMS FOR RENOVATION OF UNDERGROUND WATER SUPPLY NETWORKS - PART 3: LINING WITH CLOSE-FIT-PIPES
13/30284348 DC : 0 BS EN 60317-0-9 - SPECIFICATIONS FOR PARTICULAR TYPES OF WINDING WIRES - PART 0-9: GENERAL REQUIREMENTS - ENAMELLED RECTANGULAR ALUMINIUM WIRE
13/30268516 DC : 0 BS ISO 3320 - FLUID POWER SYSTEMS AND COMPONENTS - CYLINDER BORES AND PISTON ROD DIAMETERS AND AREA RATIOS - METRIC SERIES
05/30138794 DC : DRAFT SEP 2005
ISO 8535-1:2016 Diesel engines Steel tubes for high-pressure fuel injection pipes Part 1: Requirements for seamless cold-drawn single-wall tubes
BS ISO 5782-2:1997 Pnuematic fluid power. Compressed air filters Test methods to determine the main characteristics to be included in supplier\'s literature
I.S. EN 14409-3:2004 PLASTICS PIPING SYSTEMS FOR RENOVATION OF UNDERGROUND WATER SUPPLY NETWORKS - PART 3: LINING WITH CLOSE FIT-PIPES
12/30247148 DC : 0 BS ISO 8469 - SMALL CRAFT - NON-FIRE-RESISTANT FUEL HOSES
BS EN 60317-52:2014 Specifications for particular types of winding wires Aromatic polyamide (aramid) tape wrapped round copper wire, temperature index 220
02/121564 DC : DRAFT APR 2002 BS EN 14409-3 - PLASTICS PIPING SYSTEMS FOR THE RENOVATION OF UNDERGROUND WATER SUPPLY NETWORKS - PART 3: LINING WITH CLOSE FIT-PIPES
NF EN 60269-4 : 2010 AMD 2 2017 LOW-VOLTAGE FUSES - PART 4: SUPPLEMENTARY REQUIREMENTS FOR FUSE-LINKS FOR THE PROTECTION OF SEMICONDUCTOR DEVICES
17/30351670 DC : 0 BS ISO 4065 - THERMOPLASTICS PIPES - UNIVERSAL WALL THICKNESS TABLE
17/30363845 DC : 0 BS ISO 21927-3 - SMOKE AND HEAT CONTROL SYSTEMS - PART 3: SPECIFICATION FOR POWERED SMOKE AND HEAT EXHAUST VENTILATORS
BS ISO 10931-1:1997 Plastics piping systems for industrial applications. Poly (vinylidene fluoride) General
I.S. EN 60384-11:2008 FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 11: SECTIONAL SPECIFICATION - FIXED POLYETHYLENE-TEREPHTHALATE FILM DIELECTRIC METAL FOIL D.C. CAPACITORS
ISO 21358:2007 Vacuum technology Right-angle valve Dimensions and interfaces for pneumatic actuator
18/30365751 DC : 0 BS ISO 5289 - AGRICULTURAL MACHINERY - ENDLESS HEXAGONAL BELTS AND GROOVE SECTIONS OF CORRESPONDING PULLEYS
TBR 038 : 20001 PUBLIC SWITCHED TELEPHONE NETWORK (PSTN) - ATTACHMENT REQUIREMENTS FOR A TERMINAL EQUIPMENT INCORPORATING AN ANALOGUE HANDSET FUNCTION CAPABLE OF SUPPORTING THE JUSTIFIED CASE SERVICE WHEN CONNECTED TO THE ANALOGUE INTERFACE OF THE PSTN IN EUROPE
TS 103 739 : 1.1.2 SPEECH AND MULTIMEDIA TRANSMISSION QUALITY (STQ); TRANSMISSION REQUIREMENTS FOR WIDEBAND WIRELESS TERMINALS (HANDSET AND HEADSET) FROM A QOS PERSPECTIVE AS PERCEIVED BY THE USER
ISO 161-2:1996 Thermoplastics pipes for the conveyance of fluids — Nominal outside diameters and nominal pressures — Part 2: Inch-based series
UNI ISO 4190-1 : 2013 LIFT (ELEVATOR) INSTALLATION - PART 1: CLASS 1, 2, 3 AND 6 LIFT
13/30280432 DC : 0 BS ISO 16422 - PIPES AND JOINTS MADE OF ORIENTED UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-O) FOR THE CONVEYANCE OF WATER UNDER PRESSURE - SPECIFICATIONS
BS EN 134100:1996 Harmonized system of quality assessment for electronic components. Sectional specification: variable capacitors (Qualification approval)
05/30135633 DC : DRAFT JUN 2005 IEC 60269-1 ED 4 - LOW-VOLTAGE FUSES - PART 1: GENERAL REQUIREMENTS
08/30169640 DC : 0 BS ISO 17089-1 - MEASUREMENT OF FLUID FLOW IN CLOSED CONDUITS - ULTRASONIC METERS FOR GAS - PART 1: METERS FOR CUSTODY TRANSFER AND ALLOCATION MEASUREMENT
BS ISO 5596:1999 Hydraulic fluid power. Gas-loaded accumulators with separator. Ranges of pressures and volumes and characteristic quantities
10/30215969 DC : 0 BS EN 60127-7 - MINIATURE FUSES - PART 7: MINIATURE FUSE-LINKS FOR SPECIAL APPLICATIONS
CEI EN 133100 : 1999 SECTIONAL SPECIFICATION: PASSIVE FILTER UNITS FOR ELECTROMAGNETIC INTERFERENCE SUPPRESSION - FILTERS FOR WHICH SAFETY TESTS ARE NOT REQUIRED
I.S. EN 60059:1999 IEC STANDARD CURRENT RATINGS
BS ISO 3669:2017 Vacuum technology. Bakeable flanges. Dimensions of knife-edge flanges
BS EN 60127-2:2014 Miniature fuses Cartridge fuse-links
BS PD ISO/IEC PAS 60127-8 : 2014 MINIATURE FUSES - PART 8: FUSE RESISTORS WITH PARTICULAR OVERCURRENT PROTECTION
BS ISO 8535-2:2003 Compression ignition engines. Steel tubes for high pressure fuel injection pipes Requirements for composite tubes
BS ISO 8085-3:2001 Polyethylene fittings for use with polyethylene pipes for the supply of gaseous fuels. Metric series. Specifications Electrofusion fittings
14/30315320 DC : 0 BS EN 60384-15 - FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 15: SECTIONAL SPECIFICATION: FIXED TANTALUM CAPACITORS WITH NON-SOLID OR SOLID ELECTROLYTE
I.S. EN 140210:1994 FIXED POWER RESISTORS - CAPABILITY APPROVAL (SECTIONAL SPECIFICATION)
BS ISO 6580:2005 General-purpose industrial fans. Circular flanges. Dimensions
PD IEC/TS 62886:2016 Electroacoustics. Hearing aids. Method for measuring electroacoustic performance up to 16 kHz
BS EN 60384-4:2016 Fixed capacitors for use in electronic equipment Sectional specification. Fixed aluminium electrolytic capacitors with solid (MnO<sub>2</sub>) and non-solid electrolyte
CEI EN 60384-11 : 2008 FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 11: SECTIONAL SPECIFICATION - FIXED POLYETHYLENE-TEREPHTHALATE FILM DIELECTRIC METAL FOIL D.C. CAPACITORS
12/30257534 DC : 0 BS ISO 18225 - PLASTICS PIPING SYSTEMS - MULTILAYER PIPING SYSTEMS FOR OUTDOOR GAS INSTALLATIONS - SPECIFICATIONS FOR SYSTEMS
I.S. EN 60317-0-8:2012 SPECIFICATIONS FOR PARTICULAR TYPES OF WINDING WIRES - PART 0-8: GENERAL REQUIREMENTS - POLYESTER GLASS FIBRE WOUND, RESIN OR VARNISH IMPREGNATED OR NOT IMPREGNATED, BARE OR ENAMELED RECTANGULAR COPPER WIRE (IEC 60317-0-8:2012 (EQV))
BS EN 60938-2:2000 Fixed inductors for electromagnetic interference suppression Sectional specification
12/30247145 DC : 0 BS ISO 7840 - SMALL CRAFT - FIRE-RESISTANT FUEL HOSES
I.S. EN ISO 11299-3:2013 PLASTICS PIPING SYSTEMS FOR RENOVATION OF UNDERGROUND GAS SUPPLY NETWORKS - PART 3: LINING WITH CLOSE-FIT PIPES (ISO 11299-3:2011)
09/30202136 DC : 0 BS EN ISO 32100 - RUBBER- OR PLASTICS-COATED FABRICS - PHYSICAL AND MECHANICAL TESTS - DETERMINATION OF FLEX RESISTANCE BY THE FLEXOMETER METHOD
BS EN ISO 13351:2009 Fans. Dimensions
05/30089171 DC : DRAFT FEB 2005 ISO 283 - CONVEYOR BELTS - FULL THICKNESS TENSILE STRENGTH AND ELONGATION - SPECIFICATIONS AND METHOD OF TEST
03/104580 DC : DRAFT MAR 2003 IEC 60384-9 - FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 9: SECTIONAL SPECIFICATION - FIXED CAPACITORS OF CERAMIC DIELECTRIC, CLASS 2
DIN EN ISO 3821:2016-10 (Draft) GAS WELDING EQUIPMENT - RUBBER HOSES FOR WELDING, CUTTING AND ALLIED PROCESSES
08/30172449 DC : DRAFT APR 2008 BS ISO 8779 - PLASTICS PIPING SYSTEMS - POLYETHYLENE (PE) PIPES FOR IRRIGATION - SPECIFICATIONS
PREN 2672 : 200P1 AEROSPACE SERIES - DESIGN AND CONSTRUCTION OF PIPELINES FOR FLUIDS IN LIQUID OR GASEOUS CONDITION - DESIGN OF RIGID LINES
17/30355848 DC : 0 BS EN 60384-22 ED.3.0 - FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 22: SECTIONAL SPECIFICATION - FIXED SURFACE MOUNT MULTILAYER CAPACITORS OF CERAMIC DIELECTRIC, CLASS 2
BS 8588:2017 Polyethylene pressure pipe with an aluminium barrier layer and associated fittings for potable water supply in contaminated land. Size 20 mm to 630 mm
I.S. EN 60317-43:1998 SPECIFICATIONS FOR PARTICULAR TYPES OF WINDING WIRES - PART 43: AROMATIC POLYIMIDE TAPE WRAPPED ROUND COPPER WIRE, CLASS 240
BS EN 60384-1:2016 Fixed capacitors for use in electronic equipment Generic specification
TS 101 377-3-13 : 1.1.1 GEO-MOBILE RADIO INTERFACE SPECIFICATIONS; PART 3: NETWORK SPECIFICATIONS; SUB-PART 13: TRANSMISSION PLANNING ASPECTS OF THE SPEECH SERVICE IN THE PUBLIC SATELLITE MOBILE NETWORK (PSMN) SYSTEM; GMR-2 03.050
02/206102 DC : DRAFT MAY 2002 IEC 60384-21, ED.1 - FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 21: SECTIONAL SPECIFICATION - FIXED SURFACE MOUNT MULTILAYER CAPACITORS OF CERAMIC DIELECTRIC - CLASS 1 - ASSESSMENT LEVEL EZ
05/30130970 DC : DRAFT MAR 2005 ISO 283 - CONVEYOR BELTS - FULL THICKNESS TENSILE STRENGTH AND ELONGATION - SPECIFICATIONS AND METHOD OF TEST
07/30167951 DC : 0 BS EN 60076-1 - POWER TRANSFORMERS - PART 1: GENERAL
NF ISO 5596 : 2000 HYDRAULIC FLUID POWER - GAS-LOADED ACCUMULATORS WITH SEPARATOR - RANGES OF PRESSURES AND VOLUMES AND CHARACTERISTIC QUANTITIES
05/30132152 DC : DRAFT APR 2005 ISO 21004 - PLASTICS PIPING SYSTEMS - MULTILAYER PIPES AND THEIR JOINTS, BASED ON THERMOPLASTICS, FOR WATER SUPPLY
BIS IS 13730-44 : 2013 SPECIFICATIONS FOR PARTICULAR TYPES OF WINDING WIRES - PART 44: AROMATIC POLYMIDE TAPE WRAPPED RECTANGULAR COPPER WIRE, CLASS 240
I.S. EN 60384-18:2016 FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 18: SECTIONAL SPECIFICATION - FIXED ALUMINIUM ELECTROLYTIC SURFACE MOUNT CAPACITORS WITH SOLID (MNO[2]) AND NON-SOLID ELECTROLYTE
I.S. EN 60384-17:2005 FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 17: SECTIONAL SPECIFICATION: FIXED METALLIZED POLYPROPYLENE FILM DIELECTRIC A.C. AND PULSE CAPACITORS
ISO 17484-1:2014 Plastics piping systems Multilayer pipe systems for indoor gas installations with a maximum operating pressure up to and including 5 bar (500 kPa) Part 1: Specifications for systems
CEI EN 60269-6 : 2012 LOW-VOLTAGE FUSES - PART 6: SUPPLEMENTARY REQUIREMENTS FOR FUSE-LINKS FOR THE PROTECTION OF SOLAR PHOTOVOLTAIC ENERGY SYSTEMS
ASTM D 2992 : 2012 Standard Practice for Obtaining Hydrostatic or Pressure Design Basis for “Fiberglass” (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe and Fittings
05/30125053 DC : DRAFT MAY 2005 ISO 6301-2 - PNEUMATIC FLUID POWER - COMPRESSED AIR LUBRICANTS - PART 2: TEST METHODS TO DETERMINE THE MAIN CHARACTERISTICS TO BE INCLUDED IN THE SUPPLIERS LITERATURE
09/30195768 DC : 0 BS ISO 6224 - THERMOPLASTICS HOSES, TEXTILE-REINFORCED, FOR GENERAL-PURPOSE WATER APPLICATIONS - SPECIFICATION
BS EN 60127-6:2014 Miniature fuses Fuse-holders for miniature fuse-links
I.S. EN 60034-30:2009 ROTATING ELECTRICAL MACHINES - PART 30: EFFICIENCY CLASSES OF SINGLE-SPEED, THREE-PHASE, CAGE-INDUCTION MOTORS
ISO 4437:2007 Buried polyethylene (PE) pipes for the supply of gaseous fuels Metric series Specifications
GOST ISO 4065 : 2005 ERRATA 2008 THERMOPLASTICS PIPES - UNIVERSAL WALL THICKNESS TABLE
EN 1555-1:2010 Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) - Part 1: General
ISO 446:2004 Micrographics — ISO character and ISO test chart No. 1 — Description and use
PREN 4301 : 200P1 AEROSPACE SERIES - IDENTIFICATION MARKING METHODS FOR ENGINE ITEMS - ENGINEERING REQUIREMENTS
PREN 4199-004 : 200P3 AEROSPACE SERIES - BONDING STRAPS FOR AIRCRAFT - PART 004: ROUND BONDING STRAPS, COPPER, TIN PLATED -65 DEGREES C UP TO 150 DEGREES C AND NICKEL PLATED -65 DEGREES C UP TO 260 DEGREES C - PRODUCT STANDARD
ISO 4783-3:1981 Industrial wire screens and woven wire cloth — Guide to the choice of aperture size and wire diameter combinations — Part 3: Preferred combinations for pre-crimped or pressure-welded wire screens
I.S. EN 4199-004:2014 AEROSPACE SERIES - BONDING STRAPS FOR AIRCRAFT - PART 004: ROUND BONDING STRAPS, COPPER, TIN PLATED -65 DEGREES C UP TO 150 DEGREES C AND NICKEL PLATED -65 DEGREES C UP TO 260 DEGREES C - PRODUCT STANDARD
ISO/TR 4191:2014 Plastics piping systems for water supply Unplasticized poly(vinyl chloride)(PVC-U) and oriented PVC-U (PVC-O) Guidance for installation
CEI EN 60384-17 : 2006 FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 17: SECTIONAL SPECIFICATION: FIXED METALLIZED POLYPROPYLENE FILM DIELECTRIC A.C. AND PULSE CAPACITORS
CEI EN 130100 : 1998 SECTIONAL SPECIFICATION - FIXED POLYETHYLENE-TEREPHTALATE FILM DIELECTRIC METAL FOIL CAPACITORS FOR DIRECT CURRENT
CEI EN 60384-13 : 2013 FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 13: SECTIONAL SPECIFICATION - FIXED POLYPROPYLENE FILM DIELECTRIC METAL FOIL D.C. CAPACITORS
ISO 4878:1981 Textiles Flat woven webbing slings made of man-made fibre
S.R. CEN/TS 15223:2017 PLASTICS PIPING SYSTEMS - VALIDATED DESIGN PARAMETERS OF BURIED THERMOPLASTICS PIPING SYSTEMS
UNI EN ISO 11299-3 : 2013 PLASTICS PIPING SYSTEMS FOR RENOVATION OF UNDERGROUND GAS SUPPLY NETWORKS - PART 3: LINING WITH CLOSE-FIT PIPES
I.S. EN 60127-5:2017 MINIATURE FUSES - PART 5: GUIDELINES FOR QUALITY ASSESSMENT OF MINIATURE FUSE-LINKS
BS EN 60384-23:2015 Fixed capacitors for use in electronic equipment Sectional specification. Fixed surface mount metallized polyethylene naphthalate film dielectric DC capacitors
I.S. EN ISO 8596:2018 OPHTHALMIC OPTICS - VISUAL ACUITY TESTING - STANDARD AND CLINICAL OPTOTYPES AND THEIR PRESENTATION (ISO 8596:2017)
I.S. EN ISO 8029:2014 PLASTICS HOSE - GENERAL-PURPOSE COLLAPSIBLE WATER HOSE, TEXTILE-REINFORCED - SPECIFICATION (ISO 8029:2014)
I.S. EN 60384-15:2017 FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 15: SECTIONAL SPECIFICATION: FIXED TANTALUM CAPACITORS WITH NON-SOLID OR SOLID ELECTROLYTE
BS EN 60317-44 : 1997 SPECIFICATIONS FOR PARTICULAR TYPES OF WINDING WIRES - PART 44: AROMATIC POLYIMIDE TAPE WRAPPED RECTANGULAR COPPER WIRE, CLASS 240
I.S. EN 60384-20:2015 FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 20: SECTIONAL SPECIFICATION - FIXED METALLIZED POLYPHENYLENE SULFIDE FILM DIELECTRIC SURFACE MOUNT D.C. CAPACITORS
I.S. EN 60947-7-3:2009 LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 7-3: ANCILLARY EQUIPMENT - SAFETY REQUIREMENTS FOR FUSE TERMINAL BLOCKS
UNI CEI EN ISO 4064-1 : 2014 WATER METERS FOR COLD POTABLE WATER AND HOT WATER - PART 1: METROLOGICAL AND TECHNICAL REQUIREMENTS
CEI EN 60317-0-7 : 2012 SPECIFICATIONS FOR PARTICULAR TYPES OF WINDING WIRES - PART 0-7: GENERAL REQUIREMENTS - FULLY INSULATED (FIW) ZERODEFECT ENAMELLED ROUND COPPER WIRE
BIS IS 13730-43 : 2013 SPECIFICATIONS FOR PARTICULAR TYPES OF WINDING WIRES - PART 43: AROMATIC POLYMIDE TAPE WRAPPED ROUND COPPER WIRES, CLASS 240
S.R. CLC/TS 60034-31:2011 ROTATING ELECTRICAL MACHINES - PART 31: SELECTION OF ENERGY-EFFICIENT MOTORS INCLUDING VARIABLE SPEED APPLICATIONS - APPLICATION GUIDE
BS 3734-1:1997 Rubber. Tolerances for products Dimensional tolerances
BS ISO 8039:2014 Microscopes. Values, tolerances and symbols for magnification
17/30363921 DC : 0 BS EN 17176-2 - PLASTICS PIPING SYSTEMS FOR WATER SUPPLY AND FOR BURIED AND ABOVE GROUND DRAINAGE, SEWERAGE AND IRRIGATION UNDER PRESSURE - ORIENTED UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-O) - PART 2: PIPES
EN 12261:2018 Gas meters - Turbine gas meters
ISO 8419:2003 Belt drives — Narrow V-belts — Sections 9N/J, 15N/J and 25N/J (lengths in the effective system)
NF ISO 1174-1 : 2011 ASSEMBLY TOOLS FOR SCREWS AND NUTS - DRIVING SQUARES - PART 1: DRIVING SQUARES FOR HAND SOCKET TOOLS
ISO 11298-3:2010 Plastics piping systems for renovation of underground water supply networks Part 3: Lining with close-fit pipes
IEC 61253-1:1993 Piezoelectric ceramic resonators - A specification in the IEC quality assessment system for electronic components (IECQ) - Part 1: Generic specification - Qualification approval
ASTM D 8072 : 2017 Standard Classification for Reporting Solids and Insoluble Water Contamination of Hydrocarbon-Based Petroleum Products When Analyzed by Imaging Instrumentation
TS 103 220 : 1.1.1 SPEECH AND MULTIMEDIA TRANSMISSION QUALITY (STQ); TRANSMISSION REQUIREMENTS FOR SUPERWIDEBAND HANDHELD (HANDSET AND HANDSFREE) TERMINALS FROM A QOS PERSPECTIVE AS PERCEIVED BY THE USER
I.S. EN ISO 3821:2010 GAS WELDING EQUIPMENT - RUBBER HOSES FOR WELDING, CUTTING AND ALLIED PROCESSES
I.S. EN 129200:1994 SECTIONAL SPECIFICATION: FIXED INDUCTORS WITH CERAMIC OR FERRITE CORE WOUND WITH COPPER WIRE FOR RF CIRCUITS
ISO 14531-2:2004 Plastics pipes and fittings — Crosslinked polyethylene (PE-X) pipe systems for the conveyance of gaseous fuels — Metric series — Specifications — Part 2: Fittings for heat-fusion jointing
UNE-EN ISO 11298-3:2011 Plastics piping systems for renovation of underground water supply networks - Part 3: Lining with close-fit pipes (ISO 11298-3:2010)
ISO 6580:2005 General-purpose industrial fans Circular flanges Dimensions
UNI EN 1555-1 : 2011 PLASTICS PIPING SYSTEMS FOR THE SUPPLY OF GASEOUS FUELS - POLYETHYLENE (PE) - PART 1: GENERAL
EN 60077-5:2003 Railway applications - Electrotechnical equipment for rolling stock - Part 5: Electrotechnical components - Rules for HV fuses
DIN EN 14268 E : 2005 IRRIGATION TECHNIQUES - METERS FOR IRRIGATION WATER
DIN EN 12007-2:2012-10 GAS INFRASTRUCTURE - PIPELINES FOR MAXIMUM OPERATING PRESSURE UP TO AND INCLUDING 16 BAR - PART 2: SPECIFIC FUNCTIONAL REQUIREMENTS FOR POLYETHYLENE (MOP UP TO AND INCLUDING 10 BAR)
DIN EN 12201-1:2011-11 Plastics piping systems for water supply, and for drainage and sewerage under pressure - Polyethylene (PE) - Part 1: General
UNE-EN 60317-53:2014 Specifications for particular types of winding wires - Part 53: Aromatic polyamide (aramid) tape wrapped rectangular copper wire, temperature index 220
IEC 60384-17:2005 Fixed capacitors for use in electronic equipment - Part 17: Sectional specification: Fixed metallized polypropylene film dielectric a.c. and pulse capacitors
BS EN 61558-1 : 2005 SAFETY OF POWER TRANSFORMERS, POWER SUPPLIES, REACTORS AND SIMILAR PRODUCTS - PART 1: GENERAL REQUIREMENTS AND TESTS
BS EN 12101-3:2015 Smoke and heat control systems Specification for powered smoke and heat control ventilators (Fans)
BS EN 13244-1:2002 Plastics piping systems for buried and above-ground pressure systems for water for general purposes, drainage and sewerage. Polyethylene (PE) General
IEC 60127-2:2014 Miniature fuses - Part 2: Cartridge fuse-links
BS EN 1555-1:2010 Plastics piping systems for the supply of gaseous fuels. Polyethylene (PE) General
UNE-EN ISO 6224:2012 Thermoplastics hoses, textile-reinforced, for general-purpose water applications - Specification (ISO 6224:2011)
NF EN 60384-16 : 2006 FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 16: SECTIONAL SPECIFICATION: FIXED METALLIZED POLYPROPYLENE FILM DIELECTRIC D.C. CAPACITORS
IEC 60384-1:2016 RLV Fixed capacitors for use in electronic equipment - Part 1: Generic specification
EN 60384-22:2012 Fixed capacitors for use in electronic equipment - Part 22: Sectional specification - Fixed surface mount multilayer capacitors of ceramic dielectric, Class 2
EN 60269-1:2007/A2:2014 LOW-VOLTAGE FUSES - PART 1: GENERAL REQUIREMENTS (IEC 60269-1:2006/A2:2014)
EN 12101-3:2015 Smoke and heat control systems - Part 3: Specification for powered smoke and heat control ventilators (Fans)
EN 130300:1998 Sectional Specification: Aluminium electrolytic capacitors with solid and non-solid electrolyte
DIN EN 14154-2:2011-06 WATER METERS - PART 2: INSTALLATION AND CONDITIONS OF USE
EN 130100:1997 Sectional Specification: Fixed polyethylene-terephtalate film dielectric metal foil capacitors for direct current
EN 60947-7-3:2009 LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 7-3: ANCILLARY EQUIPMENT - SAFETY REQUIREMENTS FOR FUSE TERMINAL BLOCKS
EN 10243-1:1999/AC:2005 STEEL DIE FORGINGS - TOLERANCES ON DIMENSIONS - PART 1: DROP AND VERTICAL PRESS FORGINGS
EN 12201-1:2011 Plastics piping systems for water supply, and for drainage and sewerage under pressure - Polyethylene (PE) - Part 1: General
DIN EN 1452-1:1999-09 PLASTICS PIPING SYSTEMS FOR WATER SUPPLY - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) - PART 1: GENERAL
OVE/ONORM EN 60317-0-2 : 2014 SPECIFICATIONS FOR PARTICULAR TYPES OF WINDING WIRES - PART 0-2: GENERAL REQUIREMENTS - ENAMELLED RECTANGULAR COPPER WIRE (IEC 60317-0-2:2013)
EN 60384-18:2016 Fixed capacitors for use in electronic equipment - Part 18: Sectional specification - Fixed aluminium electrolytic surface mount capacitors with solid (MnO2) and non-solid electrolyte
EN 60384-8:2015/AC:2017-09 FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 8: SECTIONAL SPECIFICATION: FIXED CAPACITORS OF CERAMIC DIELECTRIC, CLASS 1 (IEC 60384-8:2015/COR1:2017)
EN 60384-3:2016 Fixed capacitors for use in electronic equipment - Part 3: Sectional specification - Surface mount fixed tantalum electrolytic capacitors with solid (MnO2) electrolyte
EN 60127-4:2005/A2:2013 Miniature fuses - Part 4: Universal modular fuse-links (UMF) - Through-hole and surface mount types
EN 61558-1:2005/A1:2009 SAFETY OF POWER TRANSFORMERS, POWER SUPPLIES, REACTORS AND SIMILAR PRODUCTS - PART 1: GENERAL REQUIREMENTS AND TESTS
DIN EN 13244-1:2003-04 PLASTICS PIPING SYSTEMS FOR BURIED AND ABOVE-GROUND PRESSURE SYSTEMS FOR WATER FOR GENERAL PURPOSES, DRAINAGE AND SEWERAGE - POLYETHYLENE (PE) - PART 1: GENERAL
EN 134000:1994 Generic Specification: Variable capacitors (Qualification approval and capability approval)
EN 13244-1:2002 Plastics piping systems for buried and above-ground pressure systems for water for general purposes, drainage and sewerage - Polyethylene (PE) - Part 1: General
EN 133200:1999 Sectional Specification: Passive filter units for electromagnetic interference suppression (Filters for which safety tests are required)
EN 60384-6 : 2005 FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 6: SECTIONAL SPECIFICATION - FIXED METALLIZED POLYCARBONATE FILM DIELECTRIC D.C. CAPACITORS
EN 10243-2:1999/AC:2005 STEEL DIE FORGINGS - TOLERANCES ON DIMENSIONS - PART 2: UPSET FORGING MADE ON HORIZONTAL FORGING MACHINES
EN 60317-52:2014 Specifications for particular types of winding wires - Part 52: Aromatic polyamide (aramid) tape wrapped round copper wire, temperature index 220
EN 61797-1:1996 Transformers and inductors for use in telecommunication and electronic equipment - Main dimensions of coil formers - Part 1: Coil formers for laminated cores
EN 60034-30-1:2014 Rotating electrical machines - Part 30-1: Efficiency classes of line operated AC motors (IE code)
EN 129000:1993/A1:1995 GENERIC SPECIFICATION - FIXED RF WOUND INDUCTORS
EN 12007-2:2012 Gas infrastructure - Pipelines for maximum operating pressure up to and including 16 bar - Part 2: Specific functional requirements for polyethylene (MOP up to and including 10 bar)
EN 61050:1992/A1:1995 TRANSFORMERS FOR TUBULAR DISCHARGE LAMPS HAVING A NON LOAD OUTPUT VOLTAGE EXCEEDING 1000 V (GENERALLY CALLED NEON TRANSFORMERS - GENERAL AND SAFETY REQUIREMENTS
EN 60384-20:2015 Fixed capacitors for use in electronic equipment - Part 20: Sectional specification - Fixed metallized polyphenylene sulfide film dielectric surface mount d.c. capacitors
EN 129100 : 93 AMD 1 95 SECTIONAL SPECIFICATION: WIREWOUND SURFACE MOUNTING INDUCTORS
EN 300 176-2 : 2.2.1 DIGITAL ENHANCED CORDLESS TELECOMMUNICATIONS (DECT); TEST SPECIFICATION; PART 2: AUDIO AND SPEECH
EN 60317-0-1:2014 Specifications for particular types of winding wires - Part 0-1: General requirements - Enamelled round copper wire
EN 62421:2007 Electronics assembly technology - Electronic modules
EN 131800:1997 Sectional Specification: Fixed polypropylene film dielectric metal foil d.c. capacitors
EN 60269-4:2009/A2:2016 LOW-VOLTAGE FUSES - PART 4: SUPPLEMENTARY REQUIREMENTS FOR FUSE-LINKS FOR THE PROTECTION OF SEMICONDUCTOR DEVICES (IEC 60269-4:2009/A2:2016)
EN 60127-5:2017 Miniature fuses - Part 5: Guidelines for quality assessment of miniature fuse-links
EN 60317-0-9:2015 Specifications for particular types of winding wires - Part 0-9: General requirements - Enamelled rectangular aluminium wire
EN 62674-1 : 2012 HIGH FREQUENCY INDUCTIVE COMPONENTS - PART 1: FIXED SURFACE MOUNT INDUCTORS FOR USE IN ELECTRONIC AND TELECOMMUNICATION EQUIPMENT (IEC 62674-1:2012)
EN 60317-53:2014 Specifications for particular types of winding wires - Part 53: Aromatic polyamide (aramid) tape wrapped rectangular copper wire, temperature index 220
EN 60289:1994/A11:2002 REACTORS
EN 60384-23:2015 Fixed capacitors for use in electronic equipment - Part 23: Sectional specification - Fixed surface mount metallized polyethylene naphthalate film dielectric DC capacitors
EN 132100:1996 Sectional Specification: Fixed multilayer ceramic surface mounting capacitors - Assessment levels EZ and DZ
DIN IEC 60740-2:1995-08 LAMINATIONS FOR TRANSFORMERS AND INDUCTORS FOR USE IN TELECOMMUNICATION AND ELECTRONIC EQUIPMENT - PART 2: SPECIFICATION FOR THE MINIMUM PERMEABILITIES OF LAMINATIONS MADE OF SOFT MAGNETIC METALLIC MATERIALS
BS EN 12261:2002 Gas meters. Turbine gas meters
BS EN ISO 13590:2003 Small craft. Personal watercraft. Construction and system installation requirements
06/30159832 DC : 0 BS ISO 10088 - SMALL CRAFT - PERMANENTLY INSTALLED FUEL SYSTEMS
UNE-EN 60317-0-8:2012 Specifications for particular types of winding wires - Part 0-8: General requirements - Polyester glass fibre wound, resin or varnish impregnated or not impregnated, bare or enamelled rectangular copper wire
09/30214333 DC : 0 BS EN 60384-22 - FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 22: SECTIONAL SPECIFICATION: FIXED SURFACE MOUNT MULTILAYER CAPACITORS OF CERAMIC DIELECTRIC, CLASS 2
BS EN ISO 32100:2010 Rubber- or plastics-coated fabrics. Physical and mechanical tests. Determination of flex resistance by the flexometer method
ISO 22621-1:2007 Plastics piping systems for the supply of gaseous fuels for maximum operating pressures up to and including 2 MPa (20 bar) Polyamide (PA) Part 1: General
I.S. EN 1452-1:1999 PLASTICS PIPING SYSTEMS FOR WATER SUPPLY - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) - PART 1: GENERAL
BS EN 132400:1995 Harmonized system of quality assessment for electronic components. Sectional specification. Fixed capacitors for electromagnetic interference suppression and connection to the supply mains (Assessment Level D)
BS EN 60317-0-8:2012 Specifications for particular types of winding wires General requirements. Polyester glass fibre wound, resin or varnish impregnated or not impregnated, bare or enamelled rectangular copper wire
BS EN 132100:1997 Harmonized system of quality assessment for electronic components. Sectional specification: fixed mulitlayer ceramic surface mounting capacitors. Assessment levels EZ and DZ
XP I ETS 300245-5 : 99 XP INTEGRATED SERVICES DIGITAL NETWORK (ISDN) - TECHNICAL CHARACTERISTICS OF TELEPHONY TERMINALS - PART 5: WIDEBAND (7 KHZ) HANDSET TELEPHONY
03/101947 DC : DRAFT FEB 2003 IEC 60939-1 ED.2.0 - PASSIVE FILTER UNITS FOR ELECTROMAGNETIC INTERFERENCE SUPPRESSION - PART 1: GENERIC SPECIFICATION
BS EN 60384-21:2012 Fixed capacitors for use in electronic equipment Sectional specification. Fixed surface mount multilayer capacitors of ceramic dielectric, Class 1
BS EN ISO 1452-1:2009 Plastics piping systems for water supply and for buried and above-ground drainage and sewerage under pressure. Unplasticized poly(vinyl chloride) (PVC U) General
BS EN 129000:1996 Harmonized system of quality assessment for electronic components. Generic specification. Fixed RF wound inductors
BS 6811-7.0(1993) : 1993 AMD 8595 WINDING WIRES - SPECIFICATIONS FOR PARTICULAR TYPES OF GLASS-FIBRE BRAIDED BARE OR ENAMELLED RECTANGULAR COPPER WINDING WIRES - GENERAL REQUIREMENTS
I.S. EN 14408-3:2004 PLASTICS PIPING SYSTEMS FOR RENOVATION OF UNDERGROUND GAS SUPPLY NETWORKS - PART 3: LINING WITH CLOSE-FIT PIPES
06/30156696 DC : DRAFT OCT 2006
I.S. EN 13244-1:2002 PLASTICS PIPING SYSTEMS FOR BURIED AND ABOVE-GROUND PRESSURE SYSTEMS FOR WATER FOR GENERAL PURPOSES DRAINAGE AND SEWERAGE - POLYETHYLENE (PE) - GENERAL
ISO 3821:2008 Gas welding equipment Rubber hoses for welding, cutting and allied processes
ETS 300 903 : 20004 DIGITAL CELLULAR TELECOMMUNICATIONS SYSTEM (PHASE 2+) - TRANSMISSION PLANNING ASPECTS OF THE SPEECH SERVICE IN THE GSM PUBLIC LAND MOBILE NETWORK (PLMN) SYSTEM
12/30266708 DC : 0 BS EN ISO 4064-1 - WATER METERS FOR COLD POTABLE WATER AND HOT WATER - PART 1: METROLOGICAL AND TECHNICAL REQUIREMENTS
05/30129278 DC : DRAFT FEB 2005 ISO/DIS 8029-2 - PLASTICS HOSE - GENERAL PURPOSE COLLAPSIBLE WATER HOSE, TEXTILE-REINFORCED - SPECIFICATION
04/30126864 DC : DRAFT DEC 2004 ISO 18225 - PLASTIC PIPING SYSTEMS - MULTILAYER PIPING SYSTEMS FOR OUTDOOR GAS INSTALLATIONS - SPECIFICATIONS FOR SYSTEMS
16/30339693 DC : 0 BS EN ISO 8596 - OPHTHALMIC OPTICS - VISUAL ACUITY TESTING - STANDARD AND CLINICAL OPTOTYPES AND THEIR PRESENTATION
BS ISO 21358:2007 Vacuum technology. Right-angle valve. Dimensions and interfaces for pneumatic actuator
I.S. EN 60384-25:2015 FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 25: SECTIONAL SPECIFICATION - SURFACE MOUNT FIXED ALUMINIUM ELECTROLYTIC CAPACITORS WITH CONDUCTIVE POLYMER SOLID ELECTROLYTE
BS EN 60118-0:2015 Electroacoustics. Hearing aids Measurement of the performance characteristics of hearing aids
BS EN 60384-8:2015 Fixed capacitors for use in electronic equipment Sectional specification: Fixed capacitors of ceramic dielectric, Class 1
BS 2782-11.S 1160A&B(1998) : 1998 THERMOPLASTICS PIPES FOR INDUSTRIAL APPLICATIONS UNDER PRESSURE - DETERMINATION OF THE CHEMICAL RESISTANCE FACTOR AND OF THE BASIC STRESS - POLYOLEFIN PIPES
TS 151 010-1 : 12.7.0 DIGITAL CELLULAR TELECOMMUNICATIONS SYSTEM (PHASE 2+) (GSM); MOBILE STATION (MS) CONFORMANCE SPECIFICATION; PART 1: CONFORMANCE SPECIFICATION (3GPP TS 51.010-1 VERSION 13.6.0 RELEASE 13)
09/30195381 DC : 0 BS EN 60269-6 - LOW-VOLTAGE FUSES - PART 6: SUPPLEMENTARY REQUIREMENTS FOR FUSE-LINKS FOR THE PROTECTION OF SOLAR PHOTOVOLTAIC ENERGY SYSTEMS
03/104578 DC : DRAFT MAR 2003 IEC 60384-8 ED. 3.0 - FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 8: SECTIONAL SPECIFICATION - FIXED CAPACITORS OF CERAMIC DIELECTRIC, CLASS 1
NF ISO 3684 : 1990 AMD 1 2006 CONVEYOR BELTS - DETERMINATION OF MINIMUM PULLEY DIAMETERS
BS EN 60384-16:2005 Fixed capacitors for use in electronic equipment Sectional specification: Fixed metallized polypropylene film dielectric d.c. capacitors
04/30111632 DC : DRAFT MARCH 2004
04/30126871 DC : DRAFT DEC 2004 ISO 17484-1 - PLASTICS PIPING SYSTEMS - MULTI-LAYERED PIPE SYSTEMS FOR INDOOR GAS INSTALLATIONS WITH A MAXIMUM OPERATING PRESSURE UP TO AND INCLUDING 5 BAR - PART 1: SPECIFICATIONS FOR SYSTEMS
16/30340367 DC : 0 BS 8588 - POLYEPTRHEYSLSEUNREE PIPES WITH AN ALUMINIUM BARRIER LAYER AND ASSOCIATED FITTINGS FOR POTABLE WATER SUPPLY IN CONTAMINATED LAND - SIZE 20 MM TO 630 MM
BS ISO 2398 : 1995 AMD 9704 RUBBER HOSE, TEXTILE-REINFORCED, FOR COMPRESSED AIR - SPECIFICATION
BS 6811-6.0(1993) : 1993 AMD 8988 WINDING WIRES - SPECIFICATIONS FOR PARTICULAR TYPES OF GLASS-FIBRE WOUND BARE OR ENAMELLED RECTANGULAR COPPER WINDING WIRES - GENERAL REQUIREMENTS
04/30126883 DC : DRAFT DEC 2004 ISO 4437 - BURIED POLYETHYLENE (PE) PIPES FOR THE SUPPLY OF GASEOUS FUELS - METRIC SERIES - SPECIFICATIONS
03/115115 DC : DRAFT OCT 2003 ISO 16422 - PIPES AND JOINTS MADE OF ORIENTED UNPLASTICIZED POLY (VINYL CHLORIDE) (PVC-O) FOR THE CONVEYANCE OF WATER - SPECIFICATIONS
13/30289551 DC : 0 BS EN 60384-3 - FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 3: SECTIONAL SPECIFICATION: SURFACE MOUNT FIXED TANTALUM ELECTROLYT CAPACITORS WITH MANGANESE DIOXIDE SOLID ELECTROLYTE
BS ISO 4156-1:2005 Straight cylindrical involute splines. Metric module, side fit Generalities
07/30144790 DC : 0 BS ISO 96-1 - TEXTILE MACHINERY AND ACCESSORIES - RINGS AND TRAVELLERS FOR RING SPINNING AND RING TWISTING FRAMES - PART 1: FLANGE RINGS T AND SF AND THEIR TRAVELLERS
BS 6186-1:Addendum No. 1:1993 Specification for straight cylindrical involute splines: metric module, side fit Inspection
15/30310671 DC : DRAFT FEB 2015 BS EN ISO 2157 - DENTISTRY - NOMINAL DIAMETERS AND DESIGNATION CODE NUMBERS FOR ROTARY INSTRUMENTS
CSA E60384.1 : 2014 FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 1: GENERIC SPECIFICATION
NF EN 300176-2 : 2012 DIGITAL ENHANCED CORDLESS TELECOMMUNICATIONS (DECT) - TEST SPECIFICATION - PART 2: AUDIO AND SPEECH (V2.2.1)
14/30285999 DC : 0 BS ISO 104 - ROLLING BEARINGS - THRUST BEARINGS - BOUNDARY DIMENSIONS, GENERAL PLAN
15/30313655 DC : 0 BS ISO 96-1 - TEXTILE MACHINERY AND ACCESSORIES - RINGS AND TRAVELLERS FOR RING SPINNING AND RING TWISTING FRAMES - PART 1: FLANGE RINGS T AND SF AND THEIR TRAVELLERS
ISO 4522-1:1985 Metallic coatings Test methods for electrodeposited silver and silver alloy coatings Part 1: Determination of coating thickness
11/30228188 DC : 0 BS ISO 8039 - MICROSCOPES - VALUES, TOLERANCES AND SYMBOLS FOR MAGNIFICATION
BS EN 130900:1998 Harmonized system of quality assessment for electronic components. Sectional specification: fixed polystyrene film dielectric metal foil d.c. capacitors
DIN ISO 16486-1:2015-07 Plastics piping systems for the supply of gaseous fuels - Unplasticized polyamide (PA-U) piping systems with fusion jointing and mechanical jointing - Part 1: General (ISO 16486-1:2012 + AMD 1:2014)
02/121566 DC : DRAFT APR 2002 BS EN 14408-3 - PLASTICS PIPING SYSTEMS FOR THE RENOVATION OF UNDERGROUND GAS SUPPLY NETWORKS - PART 3: LINING WITH CLOSE-FIT PIPES
NF EN 60317 0-5 : 2007 SPECIFICATIONS FOR PARTICULAR TYPES OF WINDING WIRES - PART 0-5: GENERAL REQUIREMENTS - GLASS-FIBRE BRAIDED RESIN OR VARNISH IMPREGNATED, BARE OR ENAMELLED RECTANGULAR COPPER WIRE
DD IEC TS 60034-31 : DRAFT JULY 2010 ROTATING ELECTRICAL MACHINES - PART 31: SELECTION OF ENERGY-EFFICIENT MOTORS INCLUDING VARIABLE SPEED APPLICATIONS - APPLICATION GUIDE
BS EN 60384-19:2015 Fixed capacitors for use in electronic equipment Sectional specification: Fixed metallized polyethylene-terephthalate film dielectric surface mount d.c. capacitors
NF EN 60317-0-8 : 2012 SPECIFICATIONS FOR PARTICULAR TYPES OF WINDING WIRES - PART 0-8: GENERAL REQUIREMENTS - POLYESTER GLASS FIBRE WOUND, RESIN OR VARNISH IMPREGNATED OR NOT IMPREGNATED, BARE OR ENAMELLED RECTANGULAR COPPER WIRE
02/206104 DC : DRAFT MAY 2002 IEC 60384-22, ED.1 - FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 22: SECTIONAL SPECIFICATION - FIXED SURFACE MOUNT MULTILAYER CAPACITORS OF CERAMIC DIELECTRIC - CLASS 2 - ASSESSMENT LEVEL EZ
IEC 60852-3:1992 Outline dimensions of transformers and inductors for use in telecommunication and electronic equipment - Part 3: Transformers and inductors using YUI-1 laminations
11/30247355 DC : 0 BS EN 60034-30 ED 2 - ROTATING ELECTRICAL MACHINES - PART 30: EFFICIENCY CLASSES OF SINGLE-SPEED, THREE-PHASE, CAGE-INDUCTION MOTORS (IE-CODE)
BS 2782-11:Method 1121C:1997 Methods of testing plastics. Thermoplastics pipes, fittings and valves Thermoplastics pipes for the conveyance of fluids. Nominal outside diameters and nominal pressures. Inch-based series
CEI EN 60317-0-3 : 2014 SPECIFICATIONS FOR PARTICULAR TYPES OF WINDING WIRES - PART 0-3: GENERAL REQUIREMENTS - ENAMELLED ROUND ALUMINIUM WIRE
BS EN 62674-1:2012 High frequency inductive components Fixed surface mount inductors for use in electronic and telecommunication equipment
DIN ISO 96-1:2015-10 (Draft) TEXTILE MACHINERY AND ACCESSORIES - RINGS AND TRAVELLERS FOR RING SPINNING AND RING TWISTING FRAMES - PART 1: FLANGE RINGS T AND SF AND THEIR TRAVELLERS (ISO 96-1:2016)
04/30081969 DC : DRAFT AUG 2004 ISO 6993-1 - BURIED, HIGH-IMPACT POLY (VINYL CHLORIDE) (PVC-HI) PIPING SYSTEMS FOR THE SUPPLY OF GASEOUS FUELS - PART 1: PIPES OPERATING PRESSURE OF 1 BAR (100 KPA)
BS EN 60127-3:2015 Miniature fuses Sub-miniature fuse-links
TS 103 189 : 1.1.2 IMS NETWORK TESTING (INT); SPECIFICATION OF END-TO-END QOS ASSESSMENT FOR VOLTE AND RCS INTEROP EVENTS OR PLUGTESTS
04/30115299 DC : DRAFT JUN 2004 ISO/DIS 5172 - GAS WELDING EQUIPMENT - BLOWPIPES FOR GAS WELDING, HEATING AND CUTTING - SPECIFICATIONS AND TESTS
TBR 010 : 20003 DIGITAL EUROPEAN CORDLESS TELECOMMUNICATIONS (DECT) - GENERAL TERMINAL ATTACHMENT REQUIREMENTS - TELEPHONY APPLICATIONS
ISO 18692:2007 Fibre ropes for offshore stationkeeping Polyester
GOST ISO 161-1 : 2004 THERMOPLASTICS PIPES FOR THE CONVEYANCE OF FLUIDS - NOMINAL OUTSIDE DIAMETERS AND NOMINAL PRESSURES - METRIC SERIES
BS EN 60384-15:2017 Fixed capacitors for use in electronic equipment Sectional specification: Fixed tantalum capacitors with non-solid or solid electrolyte
EN 60384-2:2012 Fixed capacitors for use in electronic equipment - Part 2: Sectional specification - Fixed metallized polyethylene terephthalate film dielectric d.c. capacitors
BS EN 60947-7-3:2009 Low-voltage switchgear and controlgear Ancillary equipment. Safety requirements for fuse terminal blocks
CSA E60127.6 : 2003 MINIATURE FUSES - PART 6: FUSE-HOLDERS FOR MINIATURE CARTRIDGE FUSE-LINKS
02/710901 DC : DRAFT SEP 2002 BS EN ISO 7840 - SMALL CRAFT - FIRE-RESISTANT FUEL HOSES
BS ISO 4156-3:2005 Straight cylindrical involute splines. Metric module, side fit Inspection
04/30069821 DC : DRAFT AUG 2004 ISO 3334 - MICROGRAPHICS - ISO RESOLUTION TEST CHART NO. 2 - DESCRIPTION AND USE
I.S. EN 60384-21:2012 FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 21: SECTIONAL SPECIFICATION - FIXED SURFACE MOUNT MULTILAYER CAPACITORS OF CERAMIC DIELECTRIC, CLASS 1 (IEC 60384-21:2011 (EQV))
CAN/CSA-E60127-6-03 (R2017) Miniature Fuses - Part 6: Fuse-Holders for Miniature Cartridge Fuse-Links (Adopted CEI/IEC 127-6:1994, first edition, 1994-04, including Amendment 1:1996, with Canadian deviations) | Coupe-circuit miniatures - Partie 6: Ensembles-porteurs pour cartouches de coupe-circuit miniatures (norme CEI/IEC 127-6:1994 adoptée, première édition, 1994-04, y compris l\'Amendement 1:1996, avec exigences propres au Canada)
DIN EN ISO 13351:2011-11 Fans - Dimensions (ISO 13351:2009)
ISO/TR 21477:2017 Optics and photonics Preparation of drawings for optical elements and systems Surface imperfection specification and measurement systems
NF EN 60289 : 96 AMD 11 2002 REACTORS
CSA E61558.1:2012 SAFETY OF POWER TRANSFORMERS, POWER SUPPLIES, REACTORS AND SIMILAR PRODUCTS - PART 1: GENERAL REQUIREMENTS AND TESTS
DIN EN ISO 11299-3 E : 2013 PLASTICS PIPING SYSTEMS FOR RENOVATION OF UNDERGROUND GAS SUPPLY NETWORKS - PART 3: LINING WITH CLOSE-FIT PIPES (ISO 11299-3:2011)
CAN/CSA-E61558-1:12 (R2017) Safety of power transformers, power supplies, reactors and similar products - Part 1: General requirements and tests (Adopted IEC 61558- 1:1997 + A1:1998, edition 2.1, 2009-04 with Canadian deviations) | Sécurité des transformateurs, alimentations, bobines d\'inductance et produits analogues - Partie 1: Exigences générales et essais (norme CEI 61558-1:1997 + A1:1998 adoptée, édition 2.1, 2009-04 avec exigences propres au Canada)
IEC 60384-1 REDLINE : 5ED 2016 FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 1: GENERIC SPECIFICATION
IEC 60317-0-10:2017 Specifications for particular types of winding wires - Part 0-10: General requirements - Polyester glass-fibre wound fused, unvarnished, or resin or varnish impregnated, bare or enamelled round copper wire
CSA Z234.3 : 1989 GUIDE FOR THE SELECTION AND USE OF PREFERRED NUMBERS
BS EN ISO 15494:2015 Plastics piping systems for industrial applications. Polybutene (PB), polyethylene (PE), polyethylene of raised temperature resistance (PE-RT), crosslinked polyethylene (PE-X), polypropylene (PP). Metric series for specifications for components and the system
ISO 4065:2018 Thermoplastics pipes — Universal wall thickness table
CEI EN 60384-26 : 2011 FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 26: SECTIONAL SPECIFICATION - FIXED ALUMINIUM ELECTROLYTIC CAPACITORS WITH CONDUCTIVE POLYMER SOLID ELECTROLYTE
BS EN 60317-0-3 : 2008 SPECIFICATIONS FOR PARTICULAR TYPES OF WINDING WIRES - PART 0-3: GENERAL REQUIREMENTS - ENAMELLED ROUND ALUMINIUM WIRE
UNE-ISO 4190-1:2011 Lift (Elevator)installation- Part 1: Class I, II, III and VI lifts
CEI EN 60384-21 : 2013 FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 21: SECTIONAL SPECIFICATION - FIXED SURFACE MOUNT MULTILAYER CAPACITORS OF CERAMIC DIELECTRIC, CLASS 1
DIN EN 12261:2007-07 GAS METERS - TURBINE GAS METERS
I.S. EN ISO 13590:2004 SMALL CRAFT - PERSONAL WATERCRAFT - CONSTRUCTION AND SYSTEM INSTALLATION REQUIREMENTS
ONORM EN ISO 32100 : 2011 RUBBER- OR PLASTICS-COATED FABRICS - PHYSICAL AND MECHANICAL TESTS - DETERMINATION OF FLEX RESISTANCE BY THE FLEXOMETER METHOD
ISO 8085-3:2001 Polyethylene fittings for use with polyethylene pipes for the supply of gaseous fuels Metric series Specifications Part 3: Electrofusion fittings
UNE-EN ISO 8469:2014 Small craft - Non-fire-resistant fuel hoses (ISO 8469:2013)
I.S. EN 60317-0-4:2016 SPECIFICATIONS FOR PARTICULAR TYPES OF WINDING WIRES - PART 0-4: GENERAL REQUIREMENTS - GLASS-FIBRE WOUND, RESIN OR VARNISH IMPREGNATED, BARE OR ENAMELLED RECTANGULAR COPPER WIRE
I.S. EN 60077-5:2003 RAILWAY APPLICATIONS - ELECTROTECHNICAL EQUIPMENT FOR ROLLING STOCK - PART 5: ELECTROTECHNICAL COMPONENTS - RULES FOR HV FUSES
I.S. EN 62674-1:2012 HIGH FREQUENCY INDUCTIVE COMPONENTS - PART 1: FIXED SURFACE MOUNT INDUCTORS FOR USE IN ELECTRONIC AND TELECOMMUNICATION EQUIPMENT (IEC 62674-1:2012 (EQV))
BS EN 60384-9:2015 Fixed capacitors for use in electronic equipment Sectional specification: Fixed capacitors of ceramic dielectric, Class 2
BS EN 60127-4 : 2005 MINIATURE FUSES - PART 4: UNIVERSAL MODULAR FUSE-LINKS (UMF) - THROUGH-HOLE AND SURFACE MOUNT TYPES
I.S. EN 60384-2:2012 FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 2: SECTIONAL SPECIFICATION - FIXED METALLIZED POLYETHYLENE TEREPHTHALATE FILM DIELECTRIC D.C. CAPACITORS (IEC 60384-2:2011 (EQV))
ISO 1174-1:2011 Assembly tools for screws and nuts — Driving squares — Part 1: Driving squares for hand socket tools
I.S. EN ISO 11297-3:2013 PLASTICS PIPING SYSTEMS FOR RENOVATION OF UNDERGROUND DRAINAGE AND SEWERAGE NETWORKS UNDER PRESSURE - PART 3: LINING WITH CLOSE-FIT PIPES (ISO 11297-3:2013)
ISO 1609:1986 Vacuum technology Flange dimensions
UNI EN ISO 32100 : 2011 RUBBER- OR PLASTICS-COATED FABRICS - PHYSICAL AND MECHANICAL TESTS - DETERMINATION OF FLEX RESISTANCE BY THE FLEXOMETER METHOD
CEI EN 60317-0-2 : 2014 SPECIFICATIONS FOR PARTICULAR TYPES OF WINDING WIRES - PART 0-2: GENERAL REQUIREMENTS - ENAMELLED RECTANGULAR COPPER WIRE
ISO 10931-1:1997 Plastics piping systems for industrial applications Poly(vinylidene fluoride) (PVDF) Part 1: General
ISO 4437-1:2014 Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) — Part 1: General
I.S. 529:1991 FIXED CERAMIC CAPACITORS OF CERAMIC DIELECTRIC, CLASS 1 (SECTIONAL SPECIFICATION)
I.S. 530:1991 FIXED CAPACITORS OF CERAMIC DIELECTRIC, CLASS 2 (SECTIONAL SPECIFICATION)
ISO 1027:1983 Radiographic image quality indicators for non-destructive testing Principles and identification
TS 100 392-16 : 1.2.1 TERRESTRIAL TRUNKED RADIO (TETRA); VOICE PLUS DATA (V+D); PART 16: NETWORK PERFORMANCE METRICS
I.S. EN 60384-22:2012 FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 22: SECTIONAL SPECIFICATION - FIXED SURFACE MOUNT MULTILAYER CAPACITORS OF CERAMIC DIELECTRIC, CLASS 2 (IEC 60384-22:2011 (EQV))
CEI EN 60384-22 : 2013 FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 22: SECTIONAL SPECIFICATION - FIXED SURFACE MOUNT MULTILAYER CAPACITORS OF CERAMIC DIELECTRIC, CLASS 2
UNE-EN ISO 11299-3:2014 Plastics piping systems for renovation of underground gas supply networks - Part 3: Lining with close-fit pipes (ISO 11299-3:2011)
ETS 300 607-1 : 2015 DIGITAL CELLULAR TELECOMMUNICATIONS SYSTEM (PHASE 2) (GSM); MOBILE STATION (MS) CONFORMANCE SPECIFICATION; PART 1: CONFORMANCE SPECIFICATION
CLC/TS 60034-31:2011 Rotating electrical machines - Part 31: Selection of energy-efficient motors including variable speed applications - Application guide
BS EN 60384-20:2015 Fixed capacitors for use in electronic equipment Sectional specification. Fixed metallized polyphenylene sulfide film dielectric surface mount d.c. capacitors
CEI EN 60384-4 : 2007 FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 4: SECTIONAL SPECIFICATION - FIXED ALUMINIUM ELECTROLYTIC CAPACITORS WITH SOLID (MNO[2]) AND NON-SOLID ELECTROLYTE
ETS 300 176-2 : 20002 DIGITAL ENHANCED CORDLESS TELECOMMUNICATIONS (DECT) - APPROVAL TEST SPECIFICATION - SPEECH
EN ISO 8469:2013 Small craft - Non-fire-resistant fuel hoses (ISO 8469:2013)
I.S. EN 60317-0-9:2015 SPECIFICATIONS FOR PARTICULAR TYPES OF WINDING WIRES - PART 0-9: GENERAL REQUIREMENTS - ENAMELLED RECTANGULAR ALUMINIUM WIRE
EN 60384-25:2015 Fixed capacitors for use in electronic equipment - Part 25: Sectional specification - Fixed aluminium electrolytic surface mount capacitors with conductive polymer solid electrolyte
DIN EN 12101-3:2015-12 SMOKE AND HEAT CONTROL SYSTEMS - PART 3: SPECIFICATION FOR POWERED SMOKE AND HEAT CONTROL VENTILATORS (FANS)
DIN EN 14268:2005-11 IRRIGATION TECHNIQUES - METERS FOR IRRIGATION WATER
IEC 60059:1999+AMD1:2009 CSV IEC standard current ratings
UNE-EN 12101-3:2016 Smoke and heat control systems - Part 3: Specification for powered smoke and heat control ventilators (Fans)
ISO 17885:2015 Plastics piping systems Mechanical fittings for pressure piping systems Specifications
IEC 60317-0-1:2013 Specifications for particular types of winding wires - Part 0-1: General requirements - Enamelled round copper wire
ISO 2157:2016 Dentistry Nominal diameters and designation code numbers for rotary instruments
BS EN ISO 12162:2009 Thermoplastics materials for pipes and fittings for pressure applications. Classification, designation and design coefficient
I.S. EN ISO 1119:2011 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SERIES OF CONICAL TAPERS AND TAPER ANGLES (ISO 1119:2011)
EN 60384-13:2012 Fixed capacitors for use in electronic equipment - Part 13: Sectional specification - Fixed polypropylene film dielectric metal foil d.c. capacitors
I.S. EN ISO 6224:2011 THERMOPLASTICS HOSES, TEXTILE-REINFORCED, FOR GENERAL-PURPOSE WATER APPLICATIONS - SPECIFICATION (ISO 6224:2011)
DIN EN ISO 7840:2013-12 SMALL CRAFT - FIRE-RESISTANT FUEL HOSES (ISO 7840:2013)
DIN EN 14409-3:2004-12 PLASTICS PIPING SYSTEMS FOR RENOVATION OF UNDERGROUND WATER SUPPLY NETWORKS - PART 3: LINING WITH CLOSE-FIT PIPES
DIN EN ISO 3821:2010-07 GAS WELDING EQUIPMENT - RUBBER HOSES FOR WELDING, CUTTING AND ALLIED PROCESSES
I.S. EN 12101-3:2015 SMOKE AND HEAT CONTROL SYSTEMS - PART 3: SPECIFICATION FOR POWERED SMOKE AND HEAT CONTROL VENTILATORS (FANS)
I.S. EN 12201-1:2011 PLASTICS PIPING SYSTEMS FOR WATER SUPPLY, AND FOR DRAINAGE AND SEWERAGE UNDER PRESSURE - POLYETHYLENE (PE) - PART 1: GENERAL
I.S. EN 1555-1:2010-2015 PLASTICS PIPING SYSTEMS FOR THE SUPPLY OF GASEOUS FUELS - POLYETHYLENE (PE) - PART 1: GENERAL
DIN 616:2000-06 Rolling bearings - General plan for boundary dimensions
I.S. EN 60317-0-5:2007 SPECIFICATIONS FOR PARTICULAR TYPES OF WINDING WIRES - PART 0-5: GENERAL REQUIREMENTS - GLASS-FIBRE BRAIDED RESIN OR VARNISH IMPREGNATED, BARE OR ENAMELLED RECTANGULAR COPPER WIRE
I.S. EN ISO 2157:2016 DENTISTRY - NOMINAL DIAMETERS AND DESIGNATION CODE NUMBERS FOR ROTARY INSTRUMENTS (ISO 2157:2016)
I.S. EN ISO 5172:2006 GAS WELDING EQUIPMENT - BLOWPIPES FOR GAS WELDING, HEATING AND CUTTING - SPECIFICATIONS AND TESTS (ISO 5172:2006)
I.S. EN 12007-2:2012 GAS INFRASTRUCTURE - PIPELINES FOR MAXIMUM OPERATING PRESSURE UP TO AND INCLUDING 16 BAR - PART 2: SPECIFIC FUNCTIONAL REQUIREMENTS FOR POLYETHYLENE (MOP UP TO AND INCLUDING 10 BAR)
BS 6339(2005) : 2005 GENERAL-PURPOSE INDUSTRIAL FANS - CIRCULAR FLANGES - DIMENSIONS
VDE 0532-20 : 1994 REACTORS
BS CECC 30400:1984 Harmonized system of quality assessment for electronic components. Sectional specification: fixed metallized polyethylene-terephthalate film dielectric capacitors for direct current
BS 3289:1982 Specification for conveyor belting primarily for use underground (including fire performance)
DIN EN 60938-2 : 2008 FIXED INDUCTORS FOR ELECTROMAGNETIC INTERFERENCE SUPPRESSION - PART 2: SECTIONAL SPECIFICATION
BS CECC 30100:1986 Harmonized system of quality assessment for electronic components. Sectional specification: fixed polyethylene terephthalate film dielectric metal foil capacitors for direct current
BS 2634-2:2010 Roughness comparison specimens Specification for spark-eroded, shot-blasted, grit-blasted and polished specimens
BS CECC 30900:1986 Harmonized system of quality assessment for electronic components. Sectional specification: fixed polystyrene film dielectric metal foil d.c. capacitors
I.S. EN ISO 12162:2009 THERMOPLASTICS MATERIALS FOR PIPES AND FITTINGS FOR PRESSURE APPLICATIONS - CLASSIFICATION, DESIGNATION AND DESIGN COEFFICIENT (ISO 12162:2009)
ISO 9803-1:2007 Vacuum technology Mounting dimensions of pipeline fittings Part 1: Non knife-edge flange type
TS 103 740 : 1.1.2 SPEECH AND MULTIMEDIA TRANSMISSION QUALITY (STQ); TRANSMISSION REQUIREMENTS FOR WIDEBAND WIRELESS TERMINALS (HANDSFREE) FROM A QOS PERSPECTIVE AS PERCEIVED BY THE USER
BS EN 60317-53:2014 Specifications for particular types of winding wires Aromatic polyamide (aramid) tape wrapped rectangular copper wire, temperature index 220
17/30329963 DC : 0 BS ISO 10110-18 - OPTICS AND PHOTONICS - PREPARATION OF DRAWINGS FOR OPTICAL ELEMENTS AND SYSTEMS - PART 18: MATERIAL IMPERFECTIONS - STRESS BIREFRINGENCE, BUBBLES AND INCLUSIONS, AND HOMOGENEITY AND STRIAE
07/30144793 DC : 0 BS ISO 96-2 - TEXTILE MACHINERY AND ACCESSORIES - RINGS AND TRAVELLERS FOR RING SPINNING AND RING TWISTING FRAMES - PART 2: HZ- AND J-RINGS AND THEIR TRAVELLERS
01/123802 DC : DRAFT OCT 2001 BS ISO 14531-2 - PLASTICS PIPES AND FITTINGS - CROSSLINKED POLYETHYLENE (PE-X) PIPE SYSTEMS FOR THE TRANSPORT OF GASEOUS FUELS - METRIC SERIES - SPECIFICATIONS - PART 2: FITTINGS FOR HEAT FUSION JOINTING
10/30212144 DC : 0 BS EN 12201-1 - PLASTICS PIPING SYSTEMS FOR WATER SUPPLY, AND FOR DRAINAGE AND SEWERAGE UNDER PRESSURE - POLYETHYLENE (PE) - PART 1: GENERAL
NF ETS 300807 : 2001 INTEGRATED SERVICES DIGITAL NETWORK (ISDN) - AUDIO CHARACTERISTICS OF TERMINALS DESIGNED TO SUPPORT CONFERENCE SERVICES IN THE ISDN
BS ISO 8419:2003 Belt drives. Narrow V-belts. Sections 9N/J, 15N/J and 25N/J (lengths in the effective system)
BS EN ISO 8029:2014 Plastics hose. General-purpose collapsible water hose, textile-reinforced. Specification
DIN SPEC 19674-1:2011-02 Plastics piping systems made from glass fibre reinforced polyethylene (PE-GF) for water supply and for drainage and sewerage under pressure - Part 1: General
13/30212494 DC : 0 BS EN ISO 15494 - PLASTICS PIPING SYSTEMS FOR INDUSTRIAL APPLICATIONS - POLYBUTENE (PB), POLYETHYLENE (PE) AND POLYPROPYLENE (PP) - SPECIFICATIONS FOR COMPONENTS AND THE SYSTEM - METRIC SERIES
05/30130524 DC : DRAFT MAR 2005 ISO 22621-1 - PLASTICS PIPING SYSTEMS FOR THE SUPPLY OF GASEOUS FUELS FOR MAXIMUM OPERATING UP TO AND INCLUDING 2 MPA (20 BAR) - POLYAMIDE (PA) - PART 1: GENERAL
13/30289538 DC : 0 BS EN 60063 - PREFERRED NUMBER SERIES FOR RESISTORS AND CAPACITORS
13/30284045 DC : 0 BS EN 60384-23 - FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 23: SECTIONAL SPECIFICATION: FIXED SURFACE MOUNT METALLIZED POLYETHYLENE NAPHTHALATE FILM DIELECTRIC D.C. CAPACITORS
BS ISO 4437:2007 Buried polyethylene (PE) pipes for the supply of gaseous fuels. Metric series. Specifications
CEI EN 62421 : 2008 ELECTRONICS ASSEMBLY TECHNOLOGY - ELECTRONIC MODULES
XP I ETS 300245-6 : 99 XP INTEGRATED SERVICES DIGITAL NETWORK (ISDN) - TECHNICAL CHARACTERISTICS OF TELEPHONY TERMINALS - PART 6: WIDEBAND (7 KHZ), LOUDSPEAKING AND HANDS FREE TELEPHONY
NF EN 4199-004 : 2015 AEROSPACE SERIES - BONDING STRAPS FOR AIRCRAFT - PART 004: ROUND BONDING STRAPS, COPPER, TIN PLATED -65 DEGREES C UP TO 150 DEGREES C AND NICKEL PLATED -65 DEGREES C UP TO 260 DEGREES C - PRODUCT STANDARD
10/30216216 DC : 0 BS EN 60384-13:2006/A1 - FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 13: SECTIONAL SPECIFICATION - FIXED POLYPROPYLENE FILM DIELECTRIC METAL FOIL D.C. CAPACITORS
14/30312344 DC : 0 PD IEC/PAS 60127-8 - MINIATURE FUSES - PART 8: FUSE RESISTORS WITH PARTICULAR OVERCURRENT PROTECTION
02/706400 DC : DRAFT MAY 2002 BS ISO 4156-1 - STRAIGHT CYLINDRICAL INVOLUTE SPLINES - METRIC MODULE, SIDE FIT - PART 1: GENERALITIES
NF EN ISO 21003-1 : 2008 MULTILAYER PIPING SYSTEMS FOR HOT AND COLD WATER INSTALLATIONS INSIDE BUILDINGS - PART 1: GENERAL
97/231700 DC : DRAFT DEC 1997 IEC 60115-1 - FIXED RESISTORS FOR USE IN ELECTRONIC EQUIPMENT - PART 1: GENERIC SPECIFICATION
11/30244915 DC : 0 BS EN ISO 8029 - PLASTICS HOSE - GENERAL-PURPOSE COLLAPSIBLE WATER HOSE, TEXTILE-REINFORCED - SPECIFICATION
BS EN ISO 8469:2013 Small craft. Non-fire-resistant fuel hoses
NF EN 60059 : 1999 AMD 1 2009
14/30311246 DC : 0 BS EN 60127-5 - MINIATURE FUSES - PART 5: GUIDELINES FOR QUALITY ASSESSMENT OF MINIATURE FUSE-LINKS
BS EN 140000:1995 Harmonized system of quality assessment for electronic components. Generic specification: fixed resistors
12/30261056 DC : DRAFT MAR 2012 BS EN 60269-6:2011+A1 - LOW-VOLTAGE FUSES - PART 6: SUPPLEMENTARY REQUIREMENTS FOR FUSE-LINKS FOR THE PROTECTION OF SOLAR PHOTOVOLTAIC ENERGY SYSTEMS
ISO 3334:2006 Micrographics ISO resolution test chart No. 2 Description and use
13/30289547 DC : 0 BS EN 60384-18 - FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 18: SECTIONAL SPECIFICATION - FIXED ALUMINIUM ELECTROLYTIC SURFACE MOUNT CAPACITORS WITH SOLID (MNO2) AND NON-SOLID ELECTROLYTE
ISO 15:2017 Rolling bearings — Radial bearings — Boundary dimensions, general plan
96/204185 DC : DRAFT APR 1996 PREN 131900 - SECTIONAL SPECIFICATION - FIXED CAPACITORS WITH METALLIZED ELECTRODES AND POLYPROPYLENE FILM DIELECTRIC FOR A.C. AND PULSE
TS 102 925 : 1.1.1 SPEECH AND MULTIMEDIA TRANSMISSION QUALITY (STQ); TRANSMISSION REQUIREMENTS FOR SUPERWIDEBAND/FULLBAND HANDSFREE AND CONFERENCING TERMINALS FROM A QOS PERSPECTIVE AS PERCEIVED BY THE USER
ES 201 377-2 : 1.4.1 SPEECH AND MULTIMEDIA TRANSMISSION QUALITY (STQ); SPECIFICATION AND MEASUREMENT OF SPEECH TRANSMISSION QUALITY; PART 2: MOUTH-TO-EAR SPEECH TRANSMISSION QUALITY INCLUDING TERMINALS
BS EN 131800:1998 Harmonized system of quality assessment for electronic components. Sectional specification: fixed polypropylene film dielectric metal foil d.c. capacitors
BS EN 60852-4:1997 Outline dimensions of transformers and inductors for use in telecommunication and electronic equipment Transformers and inductors using YUI-2 laminations
BS EN 138100:1997 Harmonized system of quality assessment for electronic components. Sectional specification: fixed inductors for electromagnetic interference suppression (inductors for which safety tests are required)
12/30258383 DC : 0 BS EN ISO 11297-3 - PLASTICS PIPING SYSTEMS FOR RENOVATION OF UNDERGROUND DRAINAGE AND SEWERAGE NETWORKS UNDER PRESSURE - PART 3: LINING WITH CLOSE-FIT PIPES
BS EN 4199-004:2014 Aerospace series. Bonding straps for aircraft Round bonding straps, copper, tin plated -65°C up to 150°C and nickel plated -65°C up to 260°C. Product Standard
08/30185535 DC : DRAFT JULY 2008 BS EN ISO 1452-1 - PLASTICS PIPING SYSTEMS FOR WATER SUPPLY AND FOR BURIED AND ABOVE-GROUND DRAINAGE AND SEWERAGE UNDER PRESSURE - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC U) - PART 1: GENERAL
11/30215951 DC : 0 BS ISO 17089-2 - MEASUREMENT OF FLUID FLOW IN CLOSED CONDUITS - ULTRASONIC METERS FOR GAS - PART 2: METERS FOR INDUSTRIAL APPLICATIONS
BS EN 130300:1998 Harmonized system of quality assessment for electronic components. Sectional specification:aluminium electrolytic capacitors with solid and non-solid electrolyte
04/30113172 DC : DRAFT MAY 2004 IEC 60384-24 ED.1 - FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 24: SECTIONAL SPECIFICATION - SURFACE MOUNT FIXED TANTALUM ELECTROLYTIC CAPACITORS WITH CONDUCTIVE POLYMER SOLID ELECTROLYTE
ISO 22:1991 Belt drives Flat transmission belts and corresponding pulleys Dimensions and tolerances
BS EN 60127-5:2017 Miniature fuses Guidelines for quality assessment of miniature fuse-links
CEI EN 60317-0-5 : 2007 SPECIFICATIONS FOR PARTICULAR TYPES OF WINDING WIRES - PART 0-5: GENERAL REQUIREMENTS - GLASS-FIBRE BRAIDED RESIN OR VARNISH IMPREGNATED, BARE OR ENAMELLED RECTANGULAR COPPER WIRE
BS EN ISO 21003-1:2008 Multilayer piping systems for hot and cold water installations inside buildings General
BS EN 61007:1997 Transformers and inductors for use in electronic and telecommunication equipment. Measuring methods and test procedures
CEI EN 60384-15 : 1ED 2017 FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 15: SECTIONAL SPECIFICATION: FIXED TANTALUM CAPACITORS WITH NON-SOLID OR SOLID ELECTROLYTE
BS 2782-7 Method 730B:1978 Methods of testing plastics. Rheological properties Determination of the viscosity of polymers in the liquid, emulsified or dispersed state using a rotational viscometer working at a defined shear rate
CEI EN 60384-3 : 2007 FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 3: SECTIONAL SPECIFICATION - SURFACE MOUNT FIXED TANTALUM ELECTROLYTIC CAPACITORS WITH SOLID (MNO[2]) ELECTROLYTE
BS 2782-11.1121A(1996) : 1996 METHODS OF TESTING PLASTICS - THERMOPLASTICS PIPES, FITTINGS AND VALVES, THERMOPLASTICS MATERIALS FOR PIPES AND FITTINGS FOR PRESSURE APPLICATIONS - CLASSIFICATION AND DESIGN OVERALL SERVICE (DESIGN) COEFFICIENT
BS EN 60077-5:2003 Railway applications. Electrotechnical equipment for rolling stock Electrotechnical components. Rules for HV fuses
14/30301133 DC : 0 BS EN 60127-7:2014 - MINIATURE FUSES - PART 7: MINIATURE FUSE-LINKS FOR SPECIAL APPLICATIONS
BS EN 60076-1:2011 Power transformers General
12/30256736 DC : 0 BS ISO 4437-1 - PLASTICS PIPING SYSTEMS FOR THE SUPPLY OF GASEOUS FUELS - POLYETHYLENE (PE) - PART 1: GENERAL
17/30355844 DC : DRAFT JUL 2017 BS EN 60384-21 - FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 21: SECTIONAL SPECIFICATION - FIXED SURFACE MOUNT MULTILAYER CAPACITORS OF CERAMIC DIELECTRIC, CLASS 1
93/200044 DC : 0 PREN 132600 - SECTIONAL SPECIFICATION - SURFACE MOUNTED MICA CAPACITORS - QUALIFICATION APPROVAL
BS EN 60127-7:2016 Miniature fuses Miniature fuse-links for special applications
BS 171-1:1978 Power transformers General
I.S. EN 60034-30-1:2014 ROTATING ELECTRICAL MACHINES - PART 30-1: EFFICIENCY CLASSES OF LINE OPERATED AC MOTORS (IE CODE)
09/30214329 DC : 0 BS EN 60384-21 - FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 21: SECTIONAL SPECIFICATION: FIXED SURFACE MOUNT MULTILAYER CAPACITORS OF CERAMIC DIELECTRIC, CLASS 1
01/713262 DC : DRAFT SEP 2001 PREN 14268 - IRRIGATION TECHNIQUES - METRES FOR IRRIGATION WATER
BS 6811-3.0(1993) : 1993 AMD 8984 WINDING WIRES - SPECIFICATIONS FOR PARTICULAR TYPES OF ROUND COPPER WINDING WIRES - GENERAL REQUIREMENTS
16/30316478 DC : DRAFT APR 2016 BS ISO 10110-7 - OPTICS AND PHOTONICS - PREPARATION OF DRAWINGS FOR OPTICAL ELEMENTS AND SYSTEMS - PART 7: SURFACE IMPERFECTION
BS ISO 6224 : 1995 AMD 9706 PLASTIC HOSES, TEXTILE-REINFORCED, FOR GENERAL-PURPOSE WATER APPLICATIONS - SPECIFICATION
UNI EN ISO 3821 : 2010 GAS WELDING EQUIPMENT - RUBBER HOSES FOR WELDING, CUTTING AND ALLIED PROCESSES
04/30107711 DC : DRAFT JAN 2004 ISO/DIS 14531-3 - PLASTIC PIPES AND FITTINGS - CROSSLINKED POLYETHYLENE (PE-X) PIPE SYSTEMS FOR THE CONVEYANCE OF GASEOUS FUELS - METRIC SERIES - SPECIFICATIONS - PART 3: FITTINGS FOR MECHANICAL JOINTING (INCLUDING PE-X/METAL TRANSITIONS)
04/30113200 DC : DRAFT MAY 2004 IEC 60384-25 ED.1 - FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 25: SECTIONAL SPECIFICATION - SURFACE MOUNT FIXED ALUMINIUM ELECTROLYTIC CAPACITORS WITH CONDUCTIVE POLYMER SOLID ELECTROLYTE
08/30191143 DC : 0 BS EN 1555-1 - PLASTICS PIPING SYSTEMS FOR THE SUPPLY OF GASEOUS FUELS - POLYETHYLENE (PE) - PART 1: GENERAL
06/30146370 DC : DRAFT SEP 2006 ISO 15439-1 - PLASTICS PIPING SYSTEMS FOR THE SUPPLY OF GASEOUS FUELS FOR MAXIMUM OPERATING PRESSURE UP TO AND INCLUDING 4 BAR - POLYAMIDE (PA) - PART 1: GENERAL
BS EN 62391-2:2006 Fixed electric double-layer capacitors for use in electronic equipment Sectional specification. Electric double-layer capacitors for power application
13/30280854 DC : 0 BS EN 60384-8 - FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 8: SECTIONAL SPECIFICATION: FIXED CAPACITORS OF CERAMIC DIELECTRIC, CLASS 1
BS ISO 1174-1:2011 Assembly tools for screws and nuts. Driving squares Driving squares for hand socket tools
BS EN 60034-30-1:2014 Rotating electrical machines Efficiency classes of line operated AC motors (IE code)
ES 203 038 : 1.2.1 SPEECH AND MULTIMEDIA TRANSMISSION QUALITY (STQ); REQUIREMENTS AND TESTS METHODS FOR TERMINAL EQUIPMENT INCORPORATING A HANDSET WHEN CONNECTED TO THE ANALOGUE INTERFACE OF THE PSTN
BS EN 60384-6:2005 Fixed capacitors for use in electronic equipment Sectional specification. Fixed metallized polycarbonate film dielectric d.c. capacitors
VDE 0713-6 : 1994 COR 1 1995 TRANSFORMERS FOR TUBULAR DISCHARGE LAMPS HAVING A NO-LOAD OUTPUT VOLTAGE EXCEEDING 1000 V (GENERALLY CALLED NEON-TRANSFORMERS) - GENERAL AND SAFETY REQUIREMENTS
BS ISO 5290:2001 Belt drives. Grooved pulleys for narrow V-belts. Groove sections 9N/J, 15N/J and 25N/J (effective system)
BS EN 60384-25:2015 Fixed capacitors for use in electronic equipment Sectional specification. Surface mount fixed aluminium electrolytic capacitors with conductive polymer solid electrolyte
PD IEC/TS 60034-30-2:2016 Rotating electrical machines Efficiency classes of variable speed AC motors (IE-code)
16/30338234 DC : 0 BS EN 60127-8 - MINIATURE FUSES - PART 8: FUSE RESISTORS WITH PARTICULAR OVERCURRENT PROTECTION
BS EN 130800:2001 Harmonized system of quality assessment for electronic components. Sectional specification. Tantalum surface mounting capacitors
IEC 60317-0-7:2017 Specifications for particular types of winding wires - Part 0-7: General requirements - Fully insulated (FIW) zero-defect enamelled round copper wire
BS EN 133200:1999 Harmonized system of quality assessment for electronic components. Sectional specification:passive filter units for electromagnetic interference suppression (filters for which safety tests are required)
DIN EN ISO 8029:2014-12 PLASTICS HOSE - GENERAL-PURPOSE COLLAPSIBLE WATER HOSE, TEXTILE-REINFORCED - SPECIFICATION (ISO 8029:2014)
BS ISO 14531-1:2002 Plastics pipes and fittings. Crosslinked polyethylene (PE-X) pipe systems for the conveyance of gaseous fuels. Metric series. Specifications Pipes
BS ISO 9803-1:2007 Vacuum technology. Mounting dimensions of pipeline fittings Non knife-edge flange type
BS 6811-5.0(1993) : AMD 8987 WINDING WIRES - SPECIFICATIONS FOR PARTICULAR TYPES OF ENAMELLED ROUND ALUMINIUM WINDING WIRES - GENERAL REQUIREMENTS
BS EN 130500:1998 Harmonized system of quality assessment for electronic components. Sectional specification: fixed metallized polycarbonate film dielectric capacitors for direct current
BS ISO 4437-1:2014 Plastics piping systems for the supply of gaseous fuels. Polyethylene (PE) General
CSA E60127.6 : 2003 : R2012 MINIATURE FUSES - PART 6: FUSE-HOLDERS FOR MINIATURE CARTRIDGE FUSE-LINKS
96/201315 DC : DRAFT JAN 1996 EN 160300 - PROPOSAL FOR A SECTIONAL SPECIFICATION FOR POWER CONVERSION UNITS OF ASSESSED QUALITY FOR CAPABILITY APPROVAL AS MODULAR ELECTRONIC UNITS
IEC 61261-2:1994 Piezoelectric ceramic filters for use in electronic equipment - A specification in the IEC quality assessment system for electronic components (IECQ) - Part 2: Sectional specification - Qualification approval
PREN 17176-2 : DRAFT 2017 PLASTICS PIPING SYSTEMS FOR WATER SUPPLY AND FOR BURIED AND ABOVE GROUND DRAINAGE, SEWERAGE AND IRRIGATION UNDER PRESSURE - ORIENTED UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-O) - PART 2: PIPES
UNI ISO 1174-1 : 2012 ASSEMBLY TOOLS FOR SCREWS AND NUTS - DRIVING SQUARES - PART 1: DRIVING SQUARES FOR HAND SOCKET TOOLS
DIN EN 61050 : 1994 COR 1 1995 TRANSFORMERS FOR TUBULAR DISCHARGE LAMPS HAVING A NO-LOAD OUTPUT VOLTAGE EXCEEDING 1000 V (GENERALLY CALLED NEON-TRANSFORMERS) - GENERAL AND SAFETY REQUIREMENTS
IEC TS 62886:2016 Electroacoustics - Hearing aids - Method for measuring electroacoustic performance up to 16 kHz
DIN EN ISO 1452-1:2010-04 Plastics piping systems for water supply and for buried and above-ground drainage and sewerage under pressure - Unplasticized poly(vinyl chloride) (PVC-U) - Part 1: General (ISO 1452-1:2009)
I.S. EN ISO 15494:2015 PLASTICS PIPING SYSTEMS FOR INDUSTRIAL APPLICATIONS - POLYBUTENE (PB), POLYETHYLENE (PE), POLYETHYLENE OF RAISED TEMPERATURE RESISTANCE (PE-RT), CROSSLINKED POLYETHYLENE (PE-X), POLYPROPYLENE (PP) - METRIC SERIES FOR SPECIFICATIONS FOR COMPONENTS AND THE SYSTEM (ISO 15494:2015)
ISO 8584-1:1990 Thermoplastics pipes for industrial applications under pressure Determination of the chemical resistance factor and of the basic stress Part 1: Polyolefin pipes
ISO 3320:2013 Fluid power systems and components — Cylinder bores and piston rod diameters and area ratios — Metric series
DIN ISO 16486-1 E : 2015 PLASTICS PIPING SYSTEMS FOR THE SUPPLY OF GASEOUS FUELS - UNPLASTICIZED POLYAMIDE (PA-U) PIPING SYSTEMS WITH FUSION JOINTING AND MECHANICAL JOINTING - PART 1: GENERAL (ISO 16486-1:2012 + AMD 1:2014)
ISO 15494:2015 Plastics piping systems for industrial applications — Polybutene (PB), polyethylene (PE), polyethylene of raised temperature resistance (PE-RT), crosslinked polyethylene (PE-X), polypropylene (PP) — Metric series for specifications for components and the system
BS EN 60289:1995 Reactors
DIN ISO 3302-1:2016-10 (Draft) RUBBER - TOLERANCES FOR PRODUCTS - PART 1: DIMENSIONAL TOLERANCES
IEC 60740-2:1993 Laminations for transformers and inductors for use in telecommunication and electronic equipment - Part 2: Specification for the minimum permeabilities of laminations made of soft magnetic metallic materials
I.S. EN 60938-2:1999 FIXED INDUCTORS FOR ELECTROMAGNETIC INTERFERENCE SUPPRESSION - PART 2: SECTIONAL SPECIFICATION
NF EN 60269-1 : 2007 AMD 2 2014 LOW-VOLTAGE FUSES - PART 1: GENERAL REQUIREMENTS
ISO 3669:2017 Vacuum technology Bakeable flanges Dimensions of knife-edge flanges
I.S. EN 60384-6:2005 FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 6: SECTIONAL SPECIFICATION - FIXED METALLIZED POLYCARBONATE FILM DIELECTRIC D.C. CAPACITORS
IEEE/ANSI C63.19-2011 REDLINE American National Standard Methods of Measurement of Compatibility between Wireless Communications Devices and Hearing Aids
BS EN 60384-2:2012 Fixed capacitors for use in electronic equipment Sectional specification. Fixed metallized polyethylene terephthalate film dielectric d.c. capacitors
ISO 6301-2:2006 Pneumatic fluid power Compressed-air lubricators Part 2: Test methods to determine the main characteristics to be included in supplier's literature
BS EN 60384-24:2015 Fixed capacitors for use in electronic equipment Sectional specification. Surface mount fixed tantalum electrolytic capacitors with conductive polymer solid electrolyte
I.S. EN 60384-24:2015 FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 24: SECTIONAL SPECIFICATION - SURFACE MOUNT FIXED TANTALUM ELECTROLYTIC CAPACITORS WITH CONDUCTIVE POLYMER SOLID ELECTROLYTE
CEI 303-13 : 2000 TELEPHONE TERMINALS, SPECIAL TELEPHONE TERMINALS AND RELATED AUXILIARY DEVICES
BS EN 60269-4 : 2009 LOW-VOLTAGE FUSES - PART 4: SUPPLEMENTARY REQUIREMENTS FOR FUSE-LINKS FOR THE PROTECTION OF SEMICONDUCTOR DEVICES (IEC 60269-4:2009)
I.S. EN 60384-1:2016 FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 1: GENERIC SPECIFICATION
ISO 4156-3:2005 Straight cylindrical involute splines Metric module, side fit Part 3: Inspection
I.S. EN 60317-44:1998 SPECIFICATIONS FOR PARTICULAR TYPES OF WINDING WIRES - AROMATIC POLYIMIDE TAPE WRAPPED RECTANGULAR COPPER WIRE, CLASS 240
I.S. EN 60317-0-6:2001 SPECIFICATIONS FOR PARTICULAR TYPES OF WINDING WIRES - PART 0-6: GENERAL REQUIREMENTS - GLASS-FIBRE WOUND RESIN OR VARNISH IMPREGNATED, BARE OR ENAMELLED ROUND COPPER WIRE
IEC TR 62271-306:2012 High-voltage switchgear and controlgear - Part 306: Guide to IEC 62271-100, IEC 62271-1 and other IEC standards related to alternating current circuit-breakers
EN ISO 11297-3 : 2013 PLASTICS PIPING SYSTEMS FOR RENOVATION OF UNDERGROUND DRAINAGE AND SEWERAGE NETWORKS UNDER PRESSURE - PART 3: LINING WITH CLOSE-FIT PIPES (ISO 11297-3:2013)
NF EN 60127-6 : 2014 MINIATURE FUSES - PART 6: FUSE-HOLDERS FOR MINIATURE CARTRIDGE FUSE-LINKS
CEI EN 60317-0-10 : 1ED 2017 SPECIFICATIONS FOR PARTICULAR TYPES OF WINDING WIRES - PART 0-10: GENERAL REQUIREMENTS - POLYESTER GLASS-FIBRE WOUND FUSED, UNVARNISHED, OR RESIN OR VARNISH IMPREGNATED, BARE OR ENAMELLED ROUND COPPER WIRE
I.S. EN 130900:1998 FIXED POLYSTYRENE FILM DIELECTRIC METAL FOIL D.C. CAPACITORS (SECTIONAL SPECIFICATION)
BS ISO 6301-2:1997 Pneumatic fluid power. Compressed air lubricators Test methods to determine the main characteristics to be included in supplier\'s literature
UNI EN ISO 8029 : 2014 PLASTICS HOSE - GENERAL-PURPOSE COLLAPSIBLE WATER HOSE, TEXTILE-REINFORCED - SPECIFICATION
UNI EN ISO 8596 : 2009 OPHTHALMIC OPTICS - VISUAL ACUITY TESTING - STANDARD OPTOTYPE AND ITS PRESENTATION
ISO/IEC TR 14252:1996 Information technology — Guide to the POSIX Open System Environment (OSE)
EG 201 377-2 : 1.3.1 SPEECH PROCESSING, TRANSMISSION AND QUALITY ASPECTS (STQ); SPECIFICATION AND MEASUREMENT OF SPEECH TRANSMISSION QUALITY; PART 2: MOUTH-TO-EAR SPEECH TRANSMISSION QUALITY INCLUDING TERMINALS
ISO 6993-3:2006 Buried, high-impact poly(vinyl chloride) (PVC-HI) piping systems for the supply of gaseous fuels Part 3: Fittings and saddles for a maximum operating pressure of 1 bar (100 kPa)
IEC 61558-1:2017 Safety of transformers, reactors, power supply units and combinations thereof - Part 1: General requirements and tests
IEC 61253-2:1993 Piezoelectric ceramic resonators - A Specification in the IEC quality assessment system for electronic components (IECQ) - Part 2: Sectional specification - Qualification approval
IEC TS 60034-31:2010 Rotating electrical machines - Part 31: Selection of energy-efficient motors including variable speed applications - Application guide
I.S. EN 131700:1998 FIXED CAPACITORS FOR DIRECT CURRENT WITH ELECTRODES OF THIN METAL FOILS AND A POLYCARBONATE FILM DIELECTRIC (SECTIONAL SPECIFICATION)
ISO 8469:2013 Small craft Non-fire-resistant fuel hoses
I.S. EN 131200:2002 SECTIONAL SPECIFICATION: FIXED CAPACITORS WITH METALLIZED ELECTRODES AND POLYPROPYLENE DIELECTRIC
IEC 60384-15:2017 Fixed capacitors for use in electronic equipment - Part 15: Sectional specification: Fixed tantalum capacitors with non-solid or solid electrolyte
ISO 5782-2:1997 Pneumatic fluid power Compressed-air filters Part 2: Test methods to determine the main characteristics to be included in supplier's literature
IEC TS 60318-7:2017 Electroacoustics - Simulators of human head and ear - Part 7: Head and torso simulator for the measurement of air-conduction hearing aids
EN 140200 : 1996 AMD 1 2001 FIXED POWER RESISTORS (SECTIONAL SPECIFICATION)
OVE/ONORM EN 60127-3 : 2015 MINIATURE FUSES - PART 3: SUB-MINIATURE FUSE-LINKS (IEC 60127-3:2015)
DIN EN 1555-1:2010-12 Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) - Part 1: General
EN 130800 : 2000 AMD 1 2003 HARMONIZED SYSTEM OF QUALITY ASSESSMENT FOR ELECTRONIC COMPONENTS ASSESSMENT FOR ELECTRONIC COMPONENTS - SECTIONAL SPECIFICATION: TANTALUM SURFACE MOUNTING CAPACITORS
DIN EN ISO 12162:2010-04 Thermoplastics materials for pipes and fittings for pressure applications - Classification, designation and design coefficient (ISO 12162:2009)
BS EN 14409-3:2004 Plastics piping systems for renovation of underground water supply networks Lining with close fit pipes
BS EN 12201-1:2011 Plastics piping systems for water supply, and for drainage and sewerage under pressure. Polyethylene (PE) General
IEC 60127-4:2005+AMD1:2008+AMD2:2012 CSV Miniature fuses - Part 4: Universal modular fuse-links (UMF) -Through-hole and surface mount types
ISO 21003-1:2008 Multilayer piping systems for hot and cold water installations inside buildings — Part 1: General
IEC 60384-24:2015 Fixed capacitors for use in electronic equipment - Part 24: Sectional specification - Fixed tantalum electrolytic surface mount capacitors with conductive polymer solid electrolyte
IEC 62391-2:2006 Fixed electric double-layer capacitors for use in electronic equipment - Part 2: Sectional specfication - Electric double layer capacitors for power application
BS EN 14154-2 : 2005 WATER METERS - PART 2: INSTALLATION AND CONDITIONS OF USE
BS EN 12007-2:2012 Gas infrastructure. Pipelines for maximum operating pressure up to and including 16 bar Specific functional requirements for polyethylene (MOP up to and including 10 bar)
IEC 60317-0-9:2015 Specifications for particular types of winding wires - Part 0-9: General requirements - Enamelled rectangular aluminium wire
IEC 60269-4:2009+AMD1:2012+AMD2:2016 CSV Low-voltage fuses - Part 4: Supplementary requirements forfuse-links for the protection of semiconductor devices
UNE-EN 12007-2:2013 Gas infrastructure - Pipelines for maximum operating pressure up to and including 16 bar - Part 2: Specific functional requirements for polyethylene (MOP up to and including 10 bar)
EN 60317-0-2:2014 Specifications for particular types of winding wires - Part 0-2: General requirements - Enamelled rectangular copper wire
UNE-EN 14154-1:2005 Water meters - Part 1: General requirements
EN 60317-0-6:2001/A1:2006 SPECIFICATION FOR PARTICULAR TYPES OF WINDING WIRES - PART 0-6: GENERAL REQUIREMENTS - GLASS-FIBRE WOUND RESIN OR VARNISH IMPREGNATED, BARE OR ENAMELLED ROUND COPPER WIRE
UNE-EN 14154-2:2005 Water meters - Part 2 : Installation and conditions of use
EN 60127-3:2015 Miniature fuses - Part 3: Sub-miniature fuse-links
OVE/ONORM EN 60384-16 : 2006 FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 16: SECTIONAL SPECIFICATION - FIXED METALLIZED POLYPROPYLENE FILM DIELECTRIC D.C. CAPACITORS
UL 60947-7-3:3ED 2017-01 Low-Voltage Switchgear and Controlgear - Part 7-3: Ancillary Equipment - Safety Requirements for Fuse Terminal Blocks
EN 131700:1997 Sectional Specification: Fixed capacitors for direct current with electrodes of thin metal foils and a polycarbonate film dielectric
UNI EN ISO 1119 : 2012 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SERIES OF CONICAL TAPERS AND TAPERS ANGLES
UNI EN 14268 : 2006 IRRIGATION TECHNIQUES - METERS FOR IRRIGATION WATER
UNI EN 12007-2 : 2012 GAS INFRASTRUCTURE - PIPELINES FOR MAXIMUM OPERATING PRESSURE UP TO AND INCLUDING 16 BAR - PART 2: SPECIFIC FUNCTIONAL REQUIREMENTS FOR POLYETHYLENE (MOP UP TO AND INCLUDING 10 BAR)
OVE/ONORM EN 60384-13 : 2012 FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 13: SECTIONAL SPECIFICATION - FIXED POLYPROPYLENE FILM DIELECTRIC METAL FOIL D.C. CAPACITORS (IEC 60384-13:2011)
UNI EN 12201-1 : 2012 PLASTICS PIPING SYSTEMS FOR WATER SUPPLY, AND FOR DRAINAGE AND SEWERAGE UNDER PRESSURE - POLYETHYLENE (PE) - PART 1: GENERAL
UNI EN ISO 12162 : 2010 THERMOPLASTICS MATERIALS FOR PIPES AND FITTINGS FOR PRESSURE APPLICATIONS - CLASSIFICATION, DESIGNATION AND DESIGN COEFFICIENT
UNI EN ISO 6224 : 2011 THERMOPLASTICS HOSES, TEXTILE-REINFORCED, FOR GENERAL-PURPOSE WATER APPLICATIONS - SPECIFICATION
UNI EN 14154-2 : 2011 WATER METERS - PART 2: INSTALLATION AND CONDITIONS OF USE
UNI EN 14154-1 : 2011 WATER METERS - PART 1: GENERAL REQUIREMENTS
EN 130900 : 1997 FIXED POLYSTYRENE FILM DIELECTRIC METAL FOIL D.C. CAPACITORS (SECTIONAL SPECIFICATION)
ISO 8085-2:2001 Polyethylene fittings for use with polyethylene pipes for the supply of gaseous fuels Metric series Specifications Part 2: Spigot fittings for butt fusion, for socket fusion using heated tools and for use with electrofusion fittings
DIN EN ISO 21003-1:2008-11 MULTILAYER PIPING SYSTEMS FOR HOT AND COLD WATER INSTALLATIONS INSIDE BUILDINGS - PART 1: GENERAL
DIN EN 138100 : 1997 SECTIONAL SPECIFICATION - FIXED INDUCTORS FOR ELECTROMAGNETIC INTERFERENCE SUPPRESSION (INDUCTORS FOR WHICH SAFETY TESTS ARE REQUIRED)
DIN EN ISO 11297-3 E : 2013 PLASTICS PIPING SYSTEMS FOR RENOVATION OF UNDERGROUND DRAINAGE AND SEWERAGE NETWORKS UNDER PRESSURE - PART 3: LINING WITH CLOSE-FIT PIPES (ISO 11297-3:2013)
BS ISO 4190-1:2010 Lift (Elevator) installation Class I, II, III and VI lifts
ISO/TS 3669-2:2007 Vacuum technology Bakable flanges Part 2: Dimensions of knife-edge flanges
BS ISO 8085-2:2001 Polyethylene fittings for use with polyethylene pipes for the supply of gaseous fuels. Metric series. Specifications Spigot fittings for butt fusion, for socket fusion using heated tools and for use with eletrofusion fittings
12/30260687 DC : 0 BS EN 60384-20 - FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 20: SECTIONAL SPECIFICATION - FIXED METALLIZED POLYPHENYLENE SULFIDE FILM DIELECTRIC SURFACE MOUNT D.C. CAPACITORS
BS ISO 161-1:2018 Thermoplastics pipes for the conveyance of fluids. Nominal outside diameters and nominal pressures Metric series
13/30284041 DC : 0 BS EN 60384-19 - FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 19: SECTIONAL SPECIFICATION: FIXED METALLIZED POLYETHYLENE-TEREPHTHALATE FILM DIELECTRIC SURFACE MOUNT D.C. CAPACITORS
05/30128222 DC : DRAFT JAN 2005 ISO DIS 5774 - PLASTIC HOSES, TEXTILE REINFORCED, FOR COMPRESSED AIR - SPECIFICATION
BS EN 60384-26:2010 Fixed capacitors for use in electronic equipment Sectional specification. Fixed aluminium electrolytic capacitors with conductive polymer solid electrolyte
10/30216212 DC : 0 BS EN 60384-2:2005/A1 - FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 2: SECTIONAL SPECIFICATION: FIXED METALLIZED POLYETHYLENE- TEREPHTHALATE FILM DIELECTRIC D.C. CAPACITORS
I.S. EN 131800:1998 FIXED POLYPROPYLENE FILM DIELECTRIC METAL FOIL D.C. CAPACITORS (SECTIONAL SPECIFICATION)
BS 848-4(1997) : 1997 FANS FOR GENERAL PURPOSES - PART 4: DIMENSIONS
DIN ISO 96-2:2010-07 Textile machinery and accessories - Rings and travellers for ring spinning and ring twisting frames - Part 2: HZ- and J-rings and their travellers (ISO 96-2:2009)
ISO 1174-2:1996 Assembly tools for screws and nuts Driving squares Part 2: Driving squares for power socket tools
11/30248330 DC : 0 BS ISO 17467-1 - PLASTICS PIPING SYSTEMS FOR THE SUPPLY OF GASEOUS FUELS - UNPLASTICIZED POLYAMIDE (PA-U) PIPING SYSTEMS JOINTED BY SOLVENT CEMENT - PART 1: GENERAL
IEC 60077-5:2003 Railway applications - Electric equipment for rolling stock - Part 5: Electrotechnical components - Rules for HV fuses
BS EN 60034-30:2009 Rotating electrical machines Efficiency classes of single-speed, three-phase, cage-induction motors (IE-code)
CEI EN 60034-30-1 : 2015 ROTATING ELECTRICAL MACHINES - PART 30-1: EFFICIENCY CLASSES OF LINE OPERATED AC MOTORS (IE CODE)
BS ISO 17467-1:2012 Plastics piping systems for the supply of gaseous fuels. Unplasticized polyamide (PA-U) piping systems jointed by solvent cement General
11/30211183 DC : 0 BS ISO 16422 - PIPES AND JOINTS MADE OF ORIENTED UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-O) FOR THE CONVEYANCE OF WATER UNDER PRESSURE - SPECIFICATIONS
CEI EN 60384-9 : 2016 FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 9: SECTIONAL SPECIFICATION: FIXED CAPACITORS OF CERAMIC DIELECTRIC, CLASS 2
I.S. EN ISO 1452-1:2009 PLASTICS PIPING SYSTEMS FOR WATER SUPPLY AND FOR BURIED AND ABOVE-GROUND DRAINAGE AND SEWERAGE UNDER PRESSURE - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) - PART 1: GENERAL
16/30354166 DC : 0 BS ISO 161-1 - THERMOPLASTICS PIPES FOR THE CONVEYANCE OF FLUIDS - NOMINAL OUTSIDE DIAMETERS AND NOMINAL PRESSURES - PART 1: METRIC SERIES
I.S. EN 143000:1994 THERMISTORS (GENERIC SPECIFICATION)
PREN ISO 15494 : DRAFT 2013 PLASTICS PIPING SYSTEMS FOR INDUSTRIAL APPLICATIONS - POLYBUTENE (PB), POLYETHYLENE (PE) AND POLYPROPYLENE (PP) - SPECIFICATIONS FOR COMPONENTS AND THE SYSTEM - METRIC SERIES (ISO/DIS 15494:2013)
03/101948 DC : DRAFT FEB 2003 IEC 60939-2 ED.2.0 - PASSIVE FILTER UNITS FOR ELECTROMAGNETIC INTERFERENCE SUPPRESSION - PART 2: SECTIONAL SPECIFICATION - TEST METHODS AND GENERAL REQUIREMENTS
UNI EN ISO 8469 : 2013 SMALL CRAFT - NON-FIRE-RESISTANT FUEL HOSES
PD ISO/TR 4191:2014 Plastics piping systems for water supply. Unplasticized poly(vinyl chloride)(PVC-U) and oriented PVC-U (PVC-O). Guidance for installation
ISO 18225:2012 Plastics piping systems — Multilayer piping systems for outdoor gas installations — Specifications for systems
CEI EN 138100 : 1996 SECTIONAL SPECIFICATION: FIXED INDUCTORS FOR ELECTROMAGNETIC INTERFERENCE SUPPRESSION (INDUCTORS FOR WHICH SAFETY TESTS ARE REQUIRED)
DIN IEC 60747-1:1987-03 SEMICONDUCTOR DEVICES; DISCRETE DEVICES AND INTEGRATED CIRCUITS; GENERAL
12/30260691 DC : 0 BS EN 60384-24 - FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 24: SECTIONAL SPECIFICATION - SURFACE MOUNT FIXED TANTALUM ELECTROLYTIC CAPACITORS WITH CONDUCTIVE POLYMER SOLID ELECTROLYTE
BS ISO 19899:2010 Plastics piping systems. Polyolefin pipes and mechanical fitting assemblies. Test method for the resistance to end load (AREL test)
14/30296564 DC : 0 BS EN 60317-0-4 - SPECIFICATIONS FOR PARTICULAR TYPES OF WINDING WIRES - PART 0-4: GENERAL REQUIREMENTS - GLASS-FIBRE WOUND RESIN OR VARNISH IMPREGNATED, BARE OR ENAMELLED RECTANGULAR COPPER WIRE
10/30208795 DC : 0 BS EN 12007-2 - GAS INFRASTRUCTURE - PIPELINES FOR MAXIMUM OPERATING PRESSURE UP TO AND INCLUDING 16 BAR - PART 2: SPECIFIC FUNCTIONAL RECOMMENDATIONS FOR POLYETHYLENE (MOP UP TO AND INCLUDING 10 BAR)
14/30280850 DC : 0 BS EN 60384-1 - FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 1: GENERIC SPECIFICATION
NF EN 60947-7-3 : 2010 LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 7-3: ANCILLARY EQUIPMENT - SAFETY REQUIREMENTS FOR FUSE TERMINAL BLOCKS
BS MA 102:1986 Specification for fire resistant fuel hoses for small craft
BS EN ISO 4064-1:2017 Water meters for cold potable water and hot water Metrological and technical requirements
10/30215691 DC : DRAFT NOV 2010 BS ISO 8535-1 - DIESEL ENGINES - STEEL TUBES FOR HIGH-PRESSURE FUEL INJECTION PIPES - PART 1: REQUIREMENTS FOR SEAMLESS COLD-DRAWN SINGLE-WALL TUBES
CEI EN 60317-0-1 : 2014 SPECIFICATIONS FOR PARTICULAR TYPES OF WINDING WIRES - PART 0-1: GENERAL REQUIREMENTS - ENAMELLED ROUND COPPER WIRE
PREN 12007-2 : DRAFT 2010 GAS INFRASTRUCTURE - PIPELINES FOR MAXIMUM OPERATING PRESSURE UP TO AND INCLUDING 16 BAR - PART 2: SPECIFIC FUNCTIONAL RECOMMENDATIONS FOR POLYETHYLENE (MOP UP TO AND INCLUDING 10 BAR)
12/30264202 DC : 0 BS EN ISO 11299-3 - PLASTICS PIPING SYSTEMS FOR RENOVATION OF UNDERGROUND GAS SUPPLY NETWORKS - PART 3: LINING WITH CLOSE-FIT PIPES
BS ISO 3302-1:2014 Rubber. Tolerances for products Dimensional tolerances
12/30276805 DC : 0 BS EN 60317-53 ED 2.0 - SPECIFICATIONS FOR PARTICULAR TYPES OF WINDING WIRES - PART 53: AROMATIC POLYAMIDE (ARAMID) TAPE WRAPPED RECTANGULAR COPPER WIRE, TEMPERATURE INDEX 220
12/30259014 DC : 0 BS EN 60127-6 - MINIATURE FUSES - PART 6: FUSE-HOLDERS FOR MINIATURE FUSE-LINKS
CEI EN 60317-0-8 : 2013 SPECIFICATIONS FOR PARTICULAR TYPES OF WINDING WIRES - PART 0-8: GENERAL REQUIREMENTS - POLYESTER GLASS-FIBRE WOUND, RESIN OR VARNISH IMPREGNATED OR NOT IMPREGNATED, BARE OR ENAMELLED RECTANGULAR COPPER WIRE
02/205635 DC : 0 IEC 60384-23. ED.1.0 - FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 23: SECTIONAL SPECIFICATION - FIXED METALLIZED POLYETHYLENE NAPHTHALATE FILM DIELECTRIC CHIP D.C. CAPACITORS
CEI EN 60034-30 : 2011 ROTATING ELECTRICAL MACHINES - PART 30: EFFICIENCY CLASSES OF SINGLE-SPEED, THREE-PHASE, CAGE-INDUCTION MOTORS (IE CODE)
CEI EN 60384-18 : 2007 FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 18: SECTIONAL SPECIFICATION - FIXED ALUMINIUM ELECTROLYTIC SURFACE MOUNT CAPACITORS WITH SOLID (MNO[2]) AND NON-SOLID ELECTROLYTE
PD CEN/TR 13259:2013 Gas welding equipment. Industrial manual and machine blowpipes for flame heating, flame brazing and allied processes
DD CLC/TS 60034-31:2011 Rotating electrical machines Selection of energy-efficient motors including variable speed applications. Application guide
BS EN 131700:1998 Harmonized system of quality assessment for electronic components. Sectional specification: Fixed capacitors for direct current with electrodes of thin metal foils and a polycarbonate film dielectric
BS ISO 3320:2013 Fluid power systems and components. Cylinder bores and piston rod diameters and area ratios. Metric series
UNI EN ISO 1452-1 : 2010 PLASTICS PIPING SYSTEMS FOR WATER SUPPLY AND FOR BURIED AND ABOVE-GROUND DRAINAGE AND SEWERAGE UNDER PRESSURE - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) - PART 1: GENERAL
05/30132515 DC : DRAFT APR 2005 ISO 21358 - VACUUM TECHNOLOGY - RIGHT-ANGLE VALVE - DIMENSIONS AND INTERFACES FOR PNEUMATIC ACTUATOR
BS 6811-8.1(1993) : 1993 AMD 8989 WINDING WIRE - SPECIFICATIONS FOR PARTICULAR TYPES OF RECTANGULAR COPPER WINDING WIRES - PAPER COVERED RECTANGULAR COPPER WIRE
ISO/TS 21432:2005 Non-destructive testing Standard test method for determining residual stresses by neutron diffraction
I.S. EN ISO 8469:2013 SMALL CRAFT - NON-FIRE-RESISTANT FUEL HOSES (ISO 8469:2013)
98/230449 DC : DRAFT FEB 1998 PREN 133200 - SECTIONAL SPECIFICATION - PASSIVE FILTER UNITS FOR ELECTROMAGNETIC INTERFERENCE SUPPRESSION (FILTERS FOR WHICH SAFETY TESTS ARE REQUIRED)
04/30109383 DC : DRAFT MAY 2004 ISO 8535-1 - COMPRESSION-IGNITION ENGINES - STEEL TUBES FOR HIGH-PRESSURE FUEL INJECTION PIPES - PART 1: REQUIREMENTS FOR SEAMLESS COLD-DRAWN SINGLE-WALL TUBES
S.R. CEN/TR 13259:2013 GAS WELDING EQUIPMENT - INDUSTRIAL MANUAL AND MACHINE BLOWPIPES FOR FLAME HEATING, FLAME BRAZING AND ALLIED PROCESSES
I.S. EN 60317-53:2014 SPECIFICATIONS FOR PARTICULAR TYPES OF WINDING WIRES - PART 53: AROMATIC POLYAMIDE (ARAMID) TAPE WRAPPED RECTANGULAR COPPER WIRE, TEMPERATURE INDEX 220
08/30176410 DC : DRAFT JULY 2008 BS EN 60317-0-7 - SPECIFICATIONS FOR PARTICULAR TYPES OF WINDING WIRES - PART 0-7: GENERAL REQUIREMENTS - FULLY INSULATED (FIW) ZERO-DEFECT ENAMELLED WINDING WIRES
11/30257662 DC : 0 BS EN 60317-0-2 - SPECIFICATIONS FOR PARTICULAR TYPES OF WINDING WIRES - PART 0-2: GENERAL REQUIREMENTS - ENAMELLED RECTANGULAR COPPER WIRE
12/30260721 DC : 0 BS EN 60384-25 - FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 25: SECTIONAL SPECIFICATION - SURFACE MOUNT FIXED ALUMINIUM ELECTROLYTIC CAPACITORS WITH CONDUCTIVE POLYMER SOLID ELECTROLYTE
BS EN 60384-13:2012 Fixed capacitors for use in electronic equipment Sectional specification/ Fixed polypropylene film dielectric metal foil d.c. capacitors
ISO 16486-1:2012 Plastics piping systems for the supply of gaseous fuels - Unplasticized polyamide (PA-U) piping systems with fusion jointing and mechanical jointing Part 1: General
DIN ISO 4782:1993-10 METAL WIRE FOR INDUSTRIAL WIRE SCREENS AND WOVEN WIRE CLOTH
BS ISO 104:2015 Rolling bearings. Thrust bearings. Boundary dimensions, general plan
BS 2782-11:Method 1121B:1997 Methods of testing plastics. Thermoplastics pipes, fittings and valves Thermoplastics pipes for the conveyance of fluids. Nominal outside diameters and nominal pressures. Metric series
BS EN 130000:1994 Harmonized system of quality assessment for electronic components. Generic specification: fixed capacitors
TBR 008 : 20002 INTEGRATED SERVICES DIGITAL NETWORK (ISDN) - TELEPHONY 3,1 kHz TELESERVICE - ATTACHMENT REQUIREMENTS FOR HANDSET TERMINALS
04/30111593 DC : DRAFT MAR 2004 IEC 60384-2 ED.3 - FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 2: SECTIONAL SPECIFICATIONS - FIXED METALLIZED POLYETHYLENE-TEREPHTHALATE FILM DIELECTRIC D.C. CAPACITORS
BS CECC 31200:1981 Harmonized system of quality assessment for electronic components: sectional specification: fixed capacitors with metallized electrodes and polypropylene dielectric
13/30278121 DC : 0 BS ISO 3302-1 - RUBBER - TOLERANCES FOR PRODUCTS - PART 1: DIMENSIONAL TOLERANCES
BS ISO 96-2:2009 Textile machinery and accessories. Rings and travellers for ring spinning and ring twisting frames HZ- and J-rings and their travellers
04/30031075 DC : DRAFT FEB 2004 ISO 4064-1 - MEASUREMENT OF WATER FLOW IN CLOSED FULLY CHARGED CONDUITS - METERS FOR COLD POTABLE WATER AND HOT WATER - PART 1: SPECIFICATIONS
BS EN 60063:2015 Preferred number series for resistors and capacitors
BS EN 60384-18:2016 Fixed capacitors for use in electronic equipment Sectional specification. Fixed aluminium electrolytic surface mount capacitors with solid (MnO<sub>2</sub>) and non-solid electrolyte
NF EN ISO 13351 : 2010 FANS - DIMENSIONS
I-ETS 300 245-6 : JAN 96 INTEGRATED SERVICES DIGITAL NETWORK (ISDN) - TECHNICAL CHARACTERISTICS OF TELEPHONY TERMINALS - WIDEBAND (7KHZ), LOUDSPEAKING AND HANDS FREE TELEPHONY
NF EN 60938-2 : 2008 AMD 1 2008 FIXED INDUCTORS FOR ELECTROMAGNETIC INTERFERENCE SUPPRESSION - PART 2: SECTIONAL SPECIFICATION
BS 6828-2:1987 Dental rotary instruments Specification for nominal sizes and designations
BS EN 130100:1998 Harmonized system of quality assessment for electronic components. Sectional specification: fixed polyethylene-terephthalate film dielectric metal foil capacitors for direct current
BS 6811-4.1(1991) : 1991 WINDING WIRES - SPECIFICATIONS FOR PARTICULAR TYPES OF RECTANGULAR WINDING WIRES - GENERAL REQUIREMENTS
BS ISO 15:2017 Rolling bearings. Radial bearings. Boundary dimensions, general plan
IEEE 269-2010 REDLINE IEEE Standard Methods for Measuring Transmission Performance of Analog and Digital Telephone Sets, Handsets, and Headsets
BS ISO 446:2004 Micrographics. ISO character and ISO test chart No 1. Description and use
BS EN 60269-1 : 2007 LOW-VOLTAGE FUSES - PART 1: GENERAL REQUIREMENTS
TR 2678 : 1 AEROSPACE SERIES - DESIGN AND CONSTRUCTION OF PIPELINES FOR FLUIDS IN LIQUID OR GASEOUS CONDITION - DESIGN OF RIGID LINES
I.S. EN 61797-1:1998 TRANSFORMERS AND INDUCTORS FOR USE IN TELECOMMUNICATION AND ELECTRONIC EQUIPMENT - MAIN DIMENSIONS OF COIL FORMERS - PART 1: COIL FORMERS FOR LAMINATED CORES
UNE 53940:2010 Plastics. Polyethylene (PE) fabricated fittings for piping systems for water supply under pressure
I.S. EN 60384-8:2015 FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 8: SECTIONAL SPECIFICATION: FIXED CAPACITORS OF CERAMIC DIELECTRIC, CLASS 1
BS EN ISO 3821:2010 Gas welding equipment. Rubber hoses for welding, cutting and allied processes
ISO 104:2015 Rolling bearings Thrust bearings Boundary dimensions, general plan
DIN 9004:1985-06 AEROSPACE; BENDING RADII FOR TUBES; APPROXIMATE VALUES FOR COLD WORKING
TS 143 050 : 13.0.0 DIGITAL CELLULAR TELECOMMUNICATIONS SYSTEM (PHASE 2+) (GSM); TRANSMISSION PLANNING ASPECTS OF THE SPEECH SERVICE IN THE GSM PUBLIC LAND MOBILE NETWORK (PLMN) SYSTEM (3GPP TS 43.050 VERSION 14.0.0 RELEASE 14)
CEI EN 60384-16 : 2006 FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 16: SECTIONAL SPECIFICATION: FIXED METALLIZED POLYPROPYLENE FILM DIELECTRIC D.C. CAPACITORS
BS EN 60059 : 1999
I.S. EN 62421:2007 ELECTRONICS ASSEMBLY TECHNOLOGY - ELECTRONIC MODULES
I.S. EN ISO 7840:2013 SMALL CRAFT - FIRE RESISTANT FUEL HOSES (ISO 7840:2013)
UNE-EN 60269-4:2011 Low-voltage fuses -- Part 4: Supplementary requirements for fuse-links for the protection of semiconductor devices
NF ISO 4156-3 : 2006 STRAIGHT CYLINDRICAL INVOLUTE SPLINES - METRIC MODULE, SIDE FIT - PART 3: INSPECTION
I.S. EN 133200:1995 PASSIVE FILTER UNITS FOR ELECTROMAGNETIC INTERFERENCE SUPPRESSION (FILTERS FOR WHICH SAFETY TESTS ARE REQUIRED) (SECTIONAL SPECIFICATION)
I.S. EN 60317-0-3:2008 SPECIFICATIONS FOR PARTICULAR TYPES OF WINDING WIRES - PART 0-3: GENERAL REQUIREMENTS - ENAMELLED ROUND ALUMINIUM WIRE
NF ETS 300 082 : 1995 INTEGRATED SERVICES DIGITAL NETWORK (ISDN) - 3,1 KHZ TELEPHONY TELESERVICE - END-TO-END COMPATIBILITY REQUIREMENTS FOR TELEPHONY TERMINALS
I.S. EN 60127-6:2014 MINIATURE FUSES - PART 6: FUSE-HOLDERS FOR MINIATURE FUSE-LINKS
ISO 6993-2:2006 Buried, high-impact poly(vinyl chloride) (PVC-HI) piping systems for the supply of gaseous fuels Part 2: Fittings for a maximum operating pressure of 200 mbar (20 kPa)
I.S. EN 60317-0-10:2017 SPECIFICATIONS FOR PARTICULAR TYPES OF WINDING WIRES - PART 0-10: GENERAL REQUIREMENTS - POLYESTER GLASS-FIBRE WOUND FUSED, UNVARNISHED, OR RESIN OR VARNISH IMPREGNATED, BARE OR ENAMELLED ROUND COPPER WIRE
ISO 13590:2003 Small craft Personal watercraft Construction and system installation requirements
OVE/ONORM EN 60384-11 : 2008 FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 11: SECTIONAL SPECIFICATION - FIXED POLYETHYLENE TEREPHTHALATE FILM DIELECTRIC METAL FOIL D.C. CAPACITORS
I.S. EN 134000:1994 GENERIC SPECIFICATION: VARIABLE CAPACITORS (QUALIFICATION APPROVAL AND CAPABILITY APPROVAL)
ISO 3684:1990 Conveyor belts — Determination of minimum pulley diameters
BS ISO 4065:2018 Thermoplastics pipes. Universal wall thickness table
BS 5989-1:1980 Rolling bearings: metric thrust bearings Specification for dimensions of thrust ball bearings with flat back faces
UNE-EN ISO 4064-1:2015 Water meters for cold potable water and hot water - Part 1: Metrological and technical requirements (ISO 4064-1:2014)
ISO 14531-1:2002 Plastics pipes and fittings — Crosslinked polyethylene (PE-X) pipe systems for the conveyance of gaseous fuels — Metric series — Specifications — Part 1: Pipes
I.S. CECC 33000:1994 PASSIVE FILTER UNITS FOR ELECTROMAGNETIC INTERFERENCE SUPPRESSION (GENERIC SPECIFICATION)
CEI EN 60076-1 : 2015 POWER TRANSFORMERS - PART 1: GENERAL
ISO 10110-7:2017 Optics and photonics — Preparation of drawings for optical elements and systems — Part 7: Surface imperfections
ANSI/ASA S1.6 : 2016 PREFERRED FREQUENCIES AND FILTER BAND CENTER FREQUENCIES FOR ACOUSTICAL MEASUREMENTS
UNI EN ISO 7840 : 2013 SMALL CRAFT - FIRE-RESISTANT FUEL HOSES
BS EN ISO 11297-3:2013 Plastics piping systems for renovation of underground drainage and sewerage networks under pressure Lining with close-fit pipes
UNI EN ISO 11297-3 : 2013 PLASTICS PIPING SYSTEMS FOR RENOVATION OF UNDERGROUND DRAINAGE AND SEWERAGE NETWORKS UNDER PRESSURE - PART 3: LINING WITH CLOSE-FIT PIPES
DIN EN ISO 15494:2016-03 PLASTICS PIPING SYSTEMS FOR INDUSTRIAL APPLICATIONS - POLYBUTENE (PB), POLYETHYLENE (PE), POLYETHYLENE OF RAISED TEMPERATURE RESISTANCE (PE-RT), CROSSLINKED POLYETHYLENE (PE-X), POLYPROPYLENE (PP) - METRIC SERIES FOR SPECIFICATIONS FOR COMPONENTS AND THE SYSTEM (ISO 15494:2015)
ISO 96-1:2016 Textile machinery and accessories Rings and travellers for ring spinning and ring twisting frames Part 1: Flange rings T and SF and their travellers
UNE-EN ISO 7840:2014 Small craft - Fire-resistant fuel hoses (ISO 7840:2013)
BS EN 131200:2002 Harmonized system of quality assessment for electronic components. Sectional Specification. Fixed capacitors with metallized electrodes and polypropylene dielectric
IEC 60384-8:2015 Fixed capacitors for use in electronic equipment - Part 8: Sectional specification: Fixed capacitors of ceramic dielectric, Class 1
NF EN 12261 : 2002 AMD 1 2006 GAS METERS - TURBINE GAS METERS
CEI EN 62391-2 : 2006 FIXED ELECTRIC DOUBLE-LAYER CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 2: SECTIONAL SPECIFICATION - ELECTRIC DOUBLE-LAYER CAPACITORS FOR POWER APPLICATION
CEN/TS 15223:2017 Plastics piping systems - Validated design parameters of buried thermoplastics piping systems
I.S. EN 60269-4:2009 LOW-VOLTAGE FUSES - PART 4: SUPPLEMENTARY REQUIREMENTS FOR FUSE-LINKS FOR THE PROTECTION OF SEMICONDUCTOR DEVICES
UNE-EN 60947-7-3:2011 Low-voltage switchgear and controlgear -- Part 7-3: Ancillary equipment - Safety requirements for fuse terminal blocks
EN ISO 13590:2003/AC:2004 SMALL CRAFT - PERSONAL WATERCRAFT - CONSTRUCTION AND SYSTEM INSTALLATION REQUIREMENTS
I.S. EN 60317-0-7:2017 SPECIFICATIONS FOR PARTICULAR TYPES OF WINDING WIRES - PART 0-7: GENERAL REQUIREMENTS - FULLY INSULATED (FIW) ZERO-DEFECT ENAMELLED ROUND COPPER WIRE
ANSI B92.2M : 1980 METRIC MODULE, INVOLUTE SPLINES
EN 60384-1:2016 Fixed capacitors for use in electronic equipment - Part 1: Generic specification
EN 60938-2:1999/A1:2007 FIXED INDUCTORS FOR ELECTROMAGNETIC INTERFERENCE SUPPRESSION - PART 2: SECTIONAL SPECIFICATION
CEI EN 130900 : 1998 SECTIONAL SPECIFICATION - FIXED POLYSTYRENE FILM DIELECTRIC METAL FOIL D.C. CAPACITORS
I.S. EN 61050:1993 TRANSFORMERS FOR TUBULAR DISCHARGE LAMPS HAVING A NON LOAD OUTPUT VOLTAGE EXCEEDING 1000 V (GENERALLY CALLED NEON TRANSFORMERS) - GENERAL AND SAFETY REQUIREMENTS
ISO 8779:2010 Plastics piping systems Polyethylene (PE) pipes for irrigation Specifications
ISO 4427-1:2007 Plastics piping systems Polyethylene (PE) pipes and fittings for water supply Part 1: General
I.S. EN 60127-3:2015 MINIATURE FUSES - PART 3: SUB-MINIATURE FUSE-LINKS
ISO 15439-1:2007 Plastics piping systems for the supply of gaseous fuels for maximum operating pressure up to and including 0,4 MPa (4 bar) Polyamide (PA) Part 1: General
I.S. EN 60127-2:2014 MINIATURE FUSES - PART 2: CARTRIDGE FUSE-LINKS
I.S. EN 60384-23:2015 FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 23: SECTIONAL SPECIFICATION - FIXED SURFACE MOUNT METALLIZED POLYETHYLENE NAPHTHALATE FILM DIELECTRIC DC CAPACITORS
EN ISO 11299-3:2013 Plastics piping systems for renovation of underground gas supply networks - Part 3: Lining with close-fit pipes (ISO 11299-3:2011)
ISO 17089-2:2012 Measurement of fluid flow in closed conduits - Ultrasonic meters for gas — Part 2: Meters for industrial applications
ISO 4422-1:1996 Pipes and fittings made of unplasticized poly(vinyl chloride) (PVC-U) for water supply Specifications Part 1: General
I.S. EN 62391-2:2006 FIXED ELECTRIC DOUBLE-LAYER CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 2: SECTIONAL SPECIFICATION - ELECTRIC DOUBLE-LAYER CAPACITORS FOR POWER APPLICATION
ISO 6993:2001 Buried, high-impact poly(vinyl chloride) (PVC-HI) pipes for the supply of gaseous fuels Specifications
ISO 8039:2014 Microscopes Values, tolerances and symbols for magnification
I.S. EN 138100:1998 FIXED INDUCTORS FOR ELECTROMAGNETIC INTERFERENCE SUPPRESSION (INDUCTORS WHICH SAFETY TESTS ARE REQUIRED) (SECTIONAL SPECIFICATION)
I.S. EN 60317-0-1:2014 SPECIFICATIONS FOR PARTICULAR TYPES OF WINDING WIRES - PART 0-1: GENERAL REQUIREMENTS - ENAMELLED ROUND COPPER WIRE
IEC 61558-1 REDLINE : 3ED 2017 SAFETY OF TRANSFORMERS, REACTORS, POWER SUPPLY UNITS AND COMBINATIONS THEREOF - PART 1: GENERAL REQUIREMENTS AND TESTS
IEC 61007:1994 Transformers and inductors for use in electronic and telecommunication equipment - Measuring methods and test procedures
I.S. EN ISO 32100:2010 RUBBER- OR PLASTICS-COATED FABRICS - PHYSICAL AND MECHANICAL TESTS - DETERMINATION OF FLEX RESISTANCE BY THE FLEXOMETER METHOD
EN 60269-6:2011 Low-voltage fuses - Part 6: Supplementary requirements for fuse-links for the protection of solar photovoltaic energy systems
DIN EN 10243-2 : 2005-07 STEEL DIE FORGINGS - TOLERANCES ON DIMENSIONS - PART 2: UPSET FORGINGS MADE ON HORIZONTAL FORGING MACHINES
DIN EN ISO 2157:2016-10 DENTISTRY - NOMINAL DIAMETERS AND DESIGNATION CODE NUMBERS FOR ROTARY INSTRUMENTS (ISO 2157:2016)
DIN EN 10243-1 : 2007-12 STEEL DIE FORGINGS - TOLERANCES ON DIMENSIONS - PART 1: DROP AND VERTICAL PRESS FORGINGS
BS EN ISO 5172 : 2006 GAS WELDING EQUIPMENT - BLOWPIPES FOR GAS WELDING, HEATING AND CUTTING - SPECIFICATIONS AND TESTS
IEC 60317-0-2:2013 Specifications for particular types of winding wires - Part 0-2: General requirements - Enamelled rectangular copper wire
UNE-EN 60317-52:2014 Specifications for particular types of winding wires - Part 52: Aromatic polyamide (aramid) tape wrapped round copper wire, temperature index 220
ISO 6224:2011 Thermoplastics hoses, textile-reinforced, for general-purpose water applications Specification
BS EN 14268:2005 Irrigation techniques. Meters for irrigation water
IEC 60384-3:2016 Fixed capacitors for use in electronic equipment - Part 3: Sectional specification - Surface mount fixed tantalum electrolytic capacitors with solid (MnO<sub>2</sub>) electrolyte
UNE-EN 60118-0:2016 Electroacoustics - Hearing aids - Part 0: Measurement of the performance characteristics of hearing aids
IEC 60118-0:2015 Electroacoustics - Hearing aids - Part 0: Measurement of the performance characteristics of hearing aids
ISO 1119:2011 Geometrical product specifications (GPS) — Series of conical tapers and taper angles
IEC 60317-0-5:2006 Specifications for particular types of winding wires - Part 0-5: General requirements - Glass-fibre braided, resin or varnish impregnated, bare or enamelled rectangular copper wire
IEC 60317-52:2014 Specifications for particular types of winding wires - Part 52: Aromatic polyamide (aramid) tape wrapped round copper wire, temperature index 220
IEC 61797-1:1996 Transformers and inductors for use in telecommunication and electronic equipment - Main dimensions of coil formers - Part 1: Coil formers for laminated cores
IEC 60384-19:2015 Fixed capacitors for use in electronic equipment - Part 19: Sectional specification: Fixed metallized polyethylene-terephthalate film dielectric surface mount d.c. capacitors
IEC 60384-2:2011 Fixed capacitors for use in electronic equipment - Part 2: Sectional specification - Fixed metallized polyethylene terephthalate film dielectric d.c. capacitors
ISO 4064-1:2014 Water meters for cold potable water and hot water Part 1: Metrological and technical requirements
BS EN ISO 6224:2011 Thermoplastics hoses, textile-reinforced, for general-purpose water applications. Specification
UNE-EN 60076-1:2013 Power transformers - Part 1: General
BS EN 10243-2:1999 Steel die forgings. Tolerances on dimensions Upset forgings made on horizontal forging machines
IEC 60317-0-3:2008+AMD1:2013 CSV Specifications for particular types of winding wires - Part 0-3:General requirements - Enamelled round aluminium wire
IEC 60384-1:2016 Fixed capacitors for use in electronic equipment - Part 1: Generic specification
UNE-EN 1555-1:2011 Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) - Part 1: General
IEC 60269-1:2006+AMD1:2009+AMD2:2014 CSV Low-voltage fuses - Part 1: General requirements
IEC 60384-23:2015 Fixed capacitors for use in electronic equipment - Part 23: Sectional specification - Fixed metallized polyethylene naphthalate film dielectric surface mount d.c. capacitors
IEC 60384-25:2015 Fixed capacitors for use in electronic equipment - Part 25: Sectional specification: Fixed aluminium electrolytic surface mount capacitors with conductive polymer solid electrolyte
IEC 60384-16:2005 Fixed capacitors for use in electronic equipment - Part 16: Sectional specification: Fixed metallized polypropylene film dielectric d.c. capacitors
IEC 60384-9:2015 Fixed capacitors for use in electronic equipment - Part 9: Sectional specification: Fixed capacitors of ceramic dielectric, Class 2
IEC 60852-4:1996 Outline dimensions of transformers and inductors for use in telecommunication and electronic equipment - Part 4: Transformers and inductors using YUI-2 laminations
IEC 62421:2007 Electronics assembly technology - Electronic modules
UNE-EN 60317-0-4:2016 Specifications for particular types of winding wires - Part 0-4: General requirements - Glass-fibre wound, resin or varnish impregnated, bare or enamelled rectangular copper wire
BS EN 10243-1:1999 Steel die forgings. Tolerances on dimensions Drop and vertical press forgings
IEC 60947-7-3:2009 Low-voltage switchgear and controlgear - Part 7-3: Ancillary equipment - Safety requirements for fuse terminal blocks
IEC 60317-0-8:2012 Specifications for particular types of winding wires - Part 0-8: General requirements - Polyester glass fibre wound, resin or varnish impregnated or not impregnated, bare or enamelled rectangular copper wire
ISO 13351:2009 Fans — Dimensions
ISO 15493:2003 Plastics piping systems for industrial applications Acrylonitrile-butadiene-styrene (ABS), unplasticized poly(vinyl chloride) (PVC-U) and chlorinated poly(vinyl chloride) (PVC-C) Specifications for components and the system Metric series
IEC 60384-18:2016 Fixed capacitors for use in electronic equipment - Part 18: Sectional specification - Fixed aluminium electrolytic surface mount capacitors with solid (MnO<sub>2</sub>) and non-solid electrolyte
ISO 266:1997 Acoustics — Preferred frequencies
UNE-EN 60317-44:1997 SPECIFICATIONS FOR PARTICULAR TYPES OF WINDING WIRES. PART 44: AROMATIC POLYIMIDE TAPE WRAPPED RECTANGULAR COPPER WIRE, CLASS 240.
IEC 60127-5:2016 Miniature fuses - Part 5: Guidelines for quality assessment of miniature fuse-links
15/30328159 DC : 0 BS EN 61558-1 - SAFETY OF POWER TRANSFORMERS, POWER SUPPLIES, REACTORS AND SIMILAR PRODUCTS - PART 1: GENERAL REQUIREMENTS AND TESTS
IEC 60317-43:1997+AMD1:2010 CSV Specifications for particular types of winding wires - Part 43: Aromatic polyimide type wrapped round copper wire, class 240
IEC 60076-1:2011 Power transformers - Part 1: General
ISO 693:1982 Dimensions of seam welding wheel blanks
IEC 60384-4:2016 Fixed capacitors for use in electronic equipment - Part 4: Sectional specification - Fixed aluminium electrolytic capacitors with solid (MnO<sub>2</sub>) and non-solid electrolyte
IEC 60317-44:1997+AMD1:2010 CSV Specifications for particular types of winding wires - Part 44: Aromatic polyimide tape wrapped rectangular copper wire, class 240
IEC 60384-21:2011 Fixed capacitors for use in electronic equipment - Part 21: Sectional specification - Fixed surface mount multilayer capacitors of ceramic dielectric, Class 1
ISO 5596:1999 Hydraulic fluid power Gas-loaded accumulators with separator Ranges of pressures and volumes and characteristic quantities
IEC 60938-2:1999+AMD1:2006 CSV Fixed inductors for electromagnetic interference suppression - Part 2: Sectional specification
IEC 60384-11:2008 Fixed capacitors for use in electronic equipment - Part 11: Sectional specification - Fixed polyethylene-terephthalate film dielectric metal foil d.c. capacitors
IEC 60384-20:2015 Fixed capacitors for use in electronic equipment - Part 20: Sectional specification - Fixed metallized polyphenylene sulfide film dielectric surface mount d.c. capacitors
BS EN 14154-1 : 2005 WATER METERS - PART 1: GENERAL REQUIREMENTS
IEC 60127-3:2015 Miniature fuses - Part 3: Sub-miniature fuse-links
ISO 5172:2006 Gas welding equipment Blowpipes for gas welding, heating and cutting Specifications and tests
IEC 60317-0-6:2001+AMD1:2006 CSV Specifications for particular types of winding wires - Part 0-6: General requirements - Glass-fibre wound resin or varnish impregnated, bare or enamelled round copper wire
IEC 60384-22:2011 Fixed capacitors for use in electronic equipment - Part 22: Sectional specification - Fixed surface mount multilayer capacitors of ceramic dielectric, Class 2
IEC 60127-6:2014 Miniature fuses - Part 6: Fuse-holders for miniature fuse-links
IEC 62674-1:2012 High frequency inductive components - Part 1: Fixed surface mount inductors for use in electronic and telecommunication equipment
IEC 60384-6:2005 Fixed capacitors for use in electronic equipment - Part 6: Sectional specification - Fixed metallized polycarbonate film dielectric d.c. capacitors
UNE-EN ISO 2157:2016 Dentistry - Nominal diameters and designation code numbers for rotary instruments (ISO 2157:2016)
BS EN 14408-3:2004 Plastics piping systems for renovation of underground gas supply networks Lining with close-fit pipes
ISO 10931:2005 Plastics piping systems for industrial applications Poly(vinylidene fluoride) (PVDF) Specifications for components and the system
IEC 60384-13:2011 Fixed capacitors for use in electronic equipment - Part 13: Sectional specification - Fixed polypropylene film dielectric metal foil d.c. capacitors
DIN ISO 3320:2016-01 FLUID POWER SYSTEMS AND COMPONENTS - CYLINDER BORES AND PISTON ROD DIAMETERS AND AREA RATIOS - METRIC SERIES (ISO 3320:2013)
EN 14409-3:2004 Plastics piping systems for renovation of underground water supply networks - Part 3: Lining with close fit-pipes
EN ISO 12162:2009 Thermoplastics materials for pipes and fittings for pressure applications - Classification, designation and design coefficient (ISO 12162:2009)
EN ISO 2157:2016 Dentistry - Nominal diameters and designation code numbers for rotary instruments (ISO 2157:2016)
EN 1452-1 : 1999 PLASTICS PIPING SYSTEMS FOR WATER SUPPLY - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) - PART 1: GENERAL
EN 14154-2:2005+A2:2011 Water meters - Part 2: Installation and conditions of use
EN ISO 3821:2010 Gas welding equipment - Rubber hoses for welding, cutting and allied processes (ISO 3821:2008)
EN 4199-004:2014 Aerospace series - Bonding straps for aircraft - Part 004: Round bonding straps, copper, tin plated -65 °C up to 150 °C and nickel plated -65 °C up to 260 °C - Product Standard
EN ISO 5172:2006/A2:2015 GAS WELDING EQUIPMENT - BLOWPIPES FOR GAS WELDING, HEATING AND CUTTING - SPECIFICATIONS AND TESTS (ISO 5172:2006/AMD 2:2015)
EN ISO 1452-1:2009 Plastics piping systems for water supply and for buried and above-ground drainage and sewerage under pressure - Unplasticized poly(vinyl chloride) (PVC-U) - Part 1: General (ISO 1452-1:2009)
EN ISO 8029:2014 Plastics hose - General-purpose collapsible water hose, textile-reinforced - Specification (ISO 8029:2014)
EN ISO 4064-1:2017 Water meters for cold potable water and hot water - Part 1: Metrological and technical requirements (ISO 4064-1:2014)
EN ISO 13351:2009 Fans - Dimensions (ISO 13351:2009)
EN ISO 6224:2011 Thermoplastics hoses, textile-reinforced, for general-purpose water applications - Specification (ISO 6224:2011)
EN ISO 21003-1:2008 Multilayer piping systems for hot and cold water installations inside buildings - Part 1: General (ISO 21003-1:2008)
EN ISO 10931:2005/A1:2015 Plastics piping systems for industrial applications - Poly(vinylidene fluoride) (PVDF) - Specifications for components and the system (ISO 10931:2005/FDAM 1:2015)
EN 14408-3:2004 Plastics piping systems for renovation of underground gas supply networks - Part 3: Lining with close-fit pipes
EN 20693:1991 Dimensions of seam welding wheel blanks (ISO 693:1982)
EN 874 : 1995 GAS WELDING EQUIPMENT - OXYGEN/FUEL GAS BLOWPIPES (CUTTING MACHINE TYPE) OF CYLINDRICAL BARREL - TYPE OF CONSTRUCTION, GENERAL SPECIFICATIONS, TEST METHODS
EN ISO 266 : 1997 ACOUSTICS - PREFERRED FREQUENCIES (ISO 266:1997)
EN ISO 15493:2003/A1:2017 Plastics piping systems for industrial applications - Acrylonitrile-butadiene-styrene (ABS), unplasticized poly(vinyl chloride) (PVC-U) and chlorinated poly(vinyl chloride) (PVC-C) - Specifications for components and the system - Metric series - Amendment 1 (ISO 15493:2003/Amd 1:2016 + Cor 1:2004)
EN ISO 1119:2011 Geometrical product specifications (GPS) - Series of conical tapers and taper angles (ISO 1119:2011)
EN 14268:2005/AC:2007 IRRIGATION TECHNIQUES - METERS FOR IRRIGATION WATER
IEEE DRAFT C63.19 : 2005 METHODS OF MEASUREMENT OF COMPATIBILITY BETWEEN WIRELESS COMMUNICATIONS DEVICES AND HEARING AIDS
BIS IS 13730-0-3 : 2012(R2017) SPECIFICATIONS FOR PARTICULAR TYPES OF WINDING WIRES - PART 0: GENERAL REQUIREMENTS - SECTION 3: ENAMELLED ROUND ALUMINIUM WIRE
BS ISO 14531-2:2004 Plastics pipes and fittings. Crosslinked polyethylene (PE-X) pipe systems for the conveyance of gaseous fuels. Metric series. Specifications Fittings for heat-fusion jointing
ISO 96-2:2009 Textile machinery and accessories Rings and travellers for ring spinning and ring twisting frames Part 2: HZ- and J-rings and their travellers
I.S. EN 60127-7:2016 MINIATURE FUSES - PART 7: MINIATURE FUSE-LINKS FOR SPECIAL APPLICATIONS
17/30363924 DC : 0 BS EN 17176-1 - PLASTICS PIPING SYSTEMS FOR WATER SUPPLY AND FOR BURIED AND ABOVE GROUND DRAINAGE, SEWERAGE AND IRRIGATION UNDER PRESSURE - ORIENTED UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-O) - PART 1: GENERAL
10/30216887 DC : 0 BS EN 60317-0-8 - SPECIFICATIONS FOR PARTICULAR TYPES OF WINDING WIRES - PART 0-8: GENERAL REQUIREMENTS - POLYESTER GLASS FIBRE WOUND, RESIN OR VARNISH IMPREGNATED OR NOT IMPREGNATED, BARE OR ENAMELLED RECTANGULAR COPPER WIRE
BS ISO 3334:2006 Micrographics. ISO resolution test chart No 2. Description and use
BS ISO 96-1:2016 Textile machinery and accessories. Rings and travellers for ring spinning and ring twisting frames Flange rings T and SF and their travellers
10/30206101 DC : 0 BS ISO 11299-3 - PLASTICS PIPING SYSTEMS FOR RENOVATION OF UNDERGROUND GAS SUPPLY NETWORKS - PART 3: LIMNING WITH CLOSE-FIT PIPES
ISO 17467-1:2012 Plastics piping systems for the supply of gaseous fuels Unplasticized polyamide (PA-U) piping systems jointed by solvent cement Part 1: General
BS CECC 43000(1982) : AMD 7315 HARMONIZED SYSTEM OF QUALITY ASSESSMENT FOR ELECTRONIC COMPONENTS: GENERIC SPECIFICATION: DIRECTLY HEATED NEGATIVE TEMPERATURE COEFFICIENT THERMISTORS
BS CECC 31700:1986 Harmonized system of quality assessment for electronic components. Sectional specification: fixed capacitors for direct current with electrodes of thin metal foils and a polycarbonate film dielectric
13/30289543 DC : 0 BS EN 60384-4 - FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 4: SECTIONAL SPECIFICATION - FIXED ALUMINIUM ELECTROLYTIC CAPACITORS WITH SOLID (MNO2) AND NON-SOLID ELECTROLYTE
I.S. EN 60317-52:2014 SPECIFICATIONS FOR PARTICULAR TYPES OF WINDING WIRES - PART 52: AROMATIC POLYAMIDE (ARAMID) TAPE WRAPPED ROUND COPPER WIRE, TEMPERATURE INDEX 220
BS EN 60384-22:2012 Fixed capacitors for use in electronic equipment Sectional specification. Fixed surface mount multilayer capacitors of ceramic dielectric, Class 2
DIN EN ISO 32100:2016-11 (Draft) RUBBER- OR PLASTICS-COATED FABRICS - PHYSICAL AND MECHANICAL TESTS - DETERMINATION OF FLEX RESISTANCE BY THE FLEXOMETER METHOD
16/30339983 DC : 0 BS ISO 8535-1 - DIESEL ENGINES - STEEL TUBES FOR HIGH-PRESSURE FUEL INJECTION PIPES - PART 1: REQUIREMENTS FOR SEAMLESS COLD-DRAWN SINGLE-WALL TUBES
17/30361344 DC : 0 BS EN ISO 11298-3 - PLASTICS PIPING SYSTEMS FOR RENOVATION OF UNDERGROUND WATER SUPPLY NETWORKS - PART 3: LINING WITH CLOSE-FIT PIPES
CEI EN 60077-5 : 2004 RAILWAY APPLICATIONS - ELECTRIC EQUIPMENT FOR ROLLING STOCK - PART 5: ELECTROTECHNICAL COMPONENTS - RULES FOR HV FUSES
16/30337983 DC : 0 BS ISO 15 - ROLLING BEARINGS - RADIAL BEARINGS - BOUNDARY DIMENSIONS, GENERAL PLAN
ISO 21004:2006 Plastics piping systems Multilayer pipes and their joints, based on thermoplastics, for water supply
OIML R 49-1 : 2013 WATER METERS FOR COLD POTABLE WATER AND HOT WATER - PART 1: METROLOGICAL AND TECHNICAL REQUIREMENTS
PREN 17176-1 : DRAFT 2017 PLASTICS PIPING SYSTEMS FOR WATER SUPPLY AND FOR BURIED AND ABOVE GROUND DRAINAGE, SEWERAGE AND IRRIGATION UNDER PRESSURE - ORIENTED UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-O) - PART 1: GENERAL
16/30340751 DC : 0 BS EN ISO 32100 - RUBBER- OR PLASTICS-COATED FABRICS - PHYSICAL AND MECHANICAL TESTS - DETERMINATION OF FLEX RESISTANCE BY THE FLEXOMETER METHOD
09/30203522 DC : 0 BS ISO 1174-1 - ASSEMBLY TOOLS FOR SCREWS AND NUTS - DRIVING SQUARES - PART 1: DRIVING SQUARES FOR HAND SOCKET TOOLS
BS ISO 4427-1 : 2007 PLASTICS PIPING SYSTEMS - POLYETHYLENE (PE) PIPES AND FITTINGS FOR WATER SUPPLY - PART 1: GENERAL
BS EN 62421:2007 Electronics assembly technology. Electronic modules
UNE 53508-1:2011 Rubber. Tolerances for products of solid rubber. Part 1: Dimensional tolerances
OVE/ONORM EN 60317-0-7 : 2013 SPECIFICATIONS FOR PARTICULAR TYPES OF WINDING WIRES - PART 0-7: GENERAL REQUIREMENTS - FULLY INSULATED (FIW) ZERO-DEFECT ENAMELLED ROUND COPPER WIRE WITH NOMINAL CONDUCTOR DIAMETER OF 0,040 MM TO 1,600 MM (IEC 60317-0-7:2012)
BS CECC 32100:1992 Harmonized system of quality assessment for electronic components. Sectional specification: fixed multilayer ceramic chip capacitors
17/30349734 DC : 0 BS EN 60384-26 ED.2.0 - FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 26: SECTIONAL SPECIFICATION - FIXED ALUMINIUM ELECTROLYTIC CAPACITORS WITH CONDUCTIVE POLYMER SOLID ELECTROLYTE
BS EN 60317-0-1:2014 Specifications for particular types of winding wires General requirements. Enamelled round copper wire
ISO 7840:2013 Small craft Fire-resistant fuel hoses
05/30128435 DC : DRAFT JAN 2005 IEC 60317-0-5 ED.2 - SPECIFICATIONS FOR PARTICULAR TYPES OF WINDING WIRES - PART 0-5: GENERAL REQUIREMENTS - GLASS-FIBRE BRAIDED RESIN OR VARNISH IMPREGNATED, BARE OR ENAMELLED RECTANGULAR COPPER WIRE
I.S. EN ISO 4064-1:2017 WATER METERS FOR COLD POTABLE WATER AND HOT WATER - PART 1: METROLOGICAL AND TECHNICAL REQUIREMENTS (ISO 4064-1:2014)
BS 6201-2:1982 Fixed capacitors for use in electronic equipment. Specification for fixed capacitors of ceramic dielectric, Class 2. Selection of methods of test and general requirements
BS EN ISO 11298-3:2011 Plastics piping systems for renovation of underground water supply networks Lining with close-fit pipes
05/30127475 DC : DRAFT JAN 2005
I.S. EN 60384-16:2005 FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 16: SECTIONAL SPECIFICATION: FIXED METALLIZED POLYPROPYLENE FILM DIELECTRIC D.C. CAPACITORS
08/30192301 DC : 0 BS EN 60384-26 ED.1 - FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 26: SECTIONAL SPECIFICATION - ALUMINIUM ELECTROLYTIC CAPACITORS WITH CONDUCTIVE POLYMER SOLID ELECTROLYTE
BS EN 60317-0-4:2016 Specifications for particular types of winding wires General requirements. Glass-fibre wound, resin or varnish impregnated, bare or enameled rectangular copper wire
DD ISO/TS 3669-2:2007 Vacuum technology. Bakable flanges Dimensions of knife-edge flanges
BS 7579:1992 Specification for designation and nominal sizes of openings for woven wire cloth, perforated plate and electroformed sheet for industrial screens
BS ISO 4150:2011 Green coffee or raw coffee. Size analysis. Manual and machine sieving
BS ISO 18692:2007 Fibre ropes for offshore stationkeeping. Polyester
BS ISO 18225:2012 Plastics piping systems. Multilayer piping systems for outdoor gas installations. Specifications for systems
BS QC 300300:1998 Harmonized system of quality assessment for electronic components. Fixed capacitors for use in electronic equipment. Sectional specification: aluminium electrolytic capacitors with solid and non-solid electrolyte
BS EN 60317-0-7:2017 Specifications for particular types of winding wires General requirements. Fully insulated (FIW) zero-defect enamelled round copper wire
UNE-EN ISO 8029:2014 Plastics hose - General-purpose collapsible water hose, textile-reinforced - Specification (ISO 8029:2014)
I.S. EN ISO 13351:2009 FANS - DIMENSIONS
10/30209612 DC : 0 BS ISO 1119 - GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SERIES OF CONICAL TAPERS AND TAPER ANGLES
BS ISO 4782:1987 Specification for metal wire for industrial wire screens and woven wire cloth
BS ISO 8584-1:1990 Thermoplastics pipes for industrial applications under pressure. Determination of the chemical resistance factor and of the basic stress Polyolefin pipes
BS ISO 17484-1:2014 Plastics piping systems. Multilayer pipe systems for indoor gas installations with a maximum operating pressure up to and including 5 bar (500 kPa) Specifications for systems
BS EN 60317-0-9:2015 Specifications for particular types of winding wires General requirements. Enamelled rectangular aluminium wire
BS ISO 17885:2015 Plastics piping systems. Mechanical fittings for pressure piping systems. Specifications
BS EN 60317-0-10:2017 Specifications for particular types of winding wires General requirements. Polyester glass-fibre wound fused, unvarnished, or resin or varnish impregnated, bare or enamelled round copper wire
UNI EN ISO 11298-3 : 2011 PLASTICS PIPING SYSTEMS FOR RENOVATION OF UNDERGROUND WATER SUPPLY NETWORKS - PART 3: LINING WITH CLOSE-FIT PIPES
17/30356728 DC : 0 BS EN 12261 - GAS METERS - TURBINE GAS METERS
I.S. 531:1991 TANTALUM SURFACE MOUNTING CAPACITORS (SECTIONAL SPECIFICATION) (REVISION)
BS ISO 16422:2014 Pipes and joints made of oriented unplasticized poly(vinyl chloride) (PVC-O) for the conveyance of water under pressure. Specifications
11/30237753 DC : 0 BS ISO 17484-1 - PLASTICS PIPING SYSTEMS - MULTILAYER PIPE SYSTEMS FOR INDOOR GAS INSTALLATIONS WITH A MAXIMUM OPERATING PRESSURE UP TO AND INCLUDING 5 BAR (500 KPA) - PART 1: SPECIFICATIONS FOR SYSTEMS
CEI EN 60384-2 : 2013 FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 2: SECTIONAL SPECIFICATION - FIXED METALLIZED POLYETHYLENE TEREPHTHALATE FILM DIELECTRIC D.C. CAPACITORS
BS 2547-8:1983 Specification for basic dimensions of cones and tubes for winding textile yarns Inner diameters and lengths of cylindrical tubes
09/30197220 DC : 0 BS ISO 4150 - GREEN COFFEE - SIZE ANALYSIS - MANUAL AND MACHINE SIEVING
BS EN 60384-11:2008 Fixed capacitors for use in electronic equipment Sectional specification. Fixed polyethylene-terephthalate film dielectric metal foil d.c. capacitors
BS EN 60317-0-2:2014 Specifications for particular types of winding wires General requirements. Enamelled rectangular copper wire
BS EN 60269-6:2011 Low-voltage fuses Supplementary requirements for fuse-links for the protection of solar photovoltaic energy systems
BS EN 61797-1:1997 Transformers and inductors for use in telecommunication and electronic equipment. Main dimensions of coil formers Coil formers for laminated cores
BS CECC 31800:1988 Harmonized system of quality assessment for electronic components. Sectional specification: fixed polypropylene film dielectric metal foil d.c. capacitors
BS EN 60384-3:2006 Fixed capacitors for use in electronic equipment Sectional specification: Surface mount fixed tantalum electrolytic capacitors with manganese dioxide solid electrolyte
BS QC 300700:1992 Harmonized system of quality assessment for electronic components. Fixed capacitors for use in electronic equipment. Sectional specification for fixed capacitors of ceramic dielectric, class 2
DIN SPEC 19674-2:2011-02 Plastics piping systems made from glass fibre reinforced polyethylene (PE-GF) for water supply and for drainage and sewerage under pressure - Part 2: Pipes
00/717057 DC : DRAFT NOV 2000 PREN 4199-004 - AEROSPACE SERIES - BONDING STRAPS FOR AIRCRAFT, COPPER, TIN PLATED, -65 DEGREE C TO +260 DEGREE C - PART 004: PRODUCT STANDARD
04/30111650 DC : DRAFT MARCH 2004
ISO 19899:2010 Plastics piping systems Polyolefin pipes and mechanical fitting assemblies Test method for the resistance to end load (AREL test)
PREN 12261 : DRAFT 2017 GAS METERS - TURBINE GAS METERS
05/30130085 DC : DRAFT JUN 2005 ISO 18692 - FIBRE ROPES FOR OFFSHORE STATION KEEPING - POLYESTER
BS CECC 40200:1981 Harmonized system of quality assessment for electronic components: sectional specification: fixed power resistors
BS EN 133100:1998 Harmonized system of quality assessment for electronic components. Sectional specification:passive filter units for electromagnetic interference suppression. Filters for which safety tests are not required
PREN ISO 1119 : DRAFT 2010 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SERIES OF CONICAL TAPERS AND TAPER ANGLES
I.S. EN 60269-6:2011 LOW-VOLTAGE FUSES - PART 6: SUPPLEMENTARY REQUIREMENTS FOR FUSE-LINKS FOR THE PROTECTION OF SOLAR PHOTOVOLTAIC ENERGY SYSTEMS
BS EN 60384-17:2005 Fixed capacitors for use in electronic equipment Sectional specification: Fixed metallized polypropylene film dielectric a.c. and pulse capacitors
BS ISO 1403 : 1995 AMD 9703 RUBBER HOSES, TEXTILE-REINFORCED, FOR GENERAL-PURPOSE WATER APPLICATIONS - SPECIFICATIONS
CSA E61558.1 : 2012 : INC : UPD 1 : 2014 SAFETY OF POWER TRANSFORMERS, POWER SUPPLIES, REACTORS AND SIMILAR PRODUCTS - PART 1: GENERAL REQUIREMENTS AND TESTS
DIN VDE 0636-10 : 1992 LOW-VOLTAGES FUSES; GENERAL REQUIREMENTS
TS 100 903 : 5.4.0 DIGITAL CELLULAR TELECOMMUNICATIONS SYSTEM (PHASE 2+); TRANSMISSION PLANNING ASPECTS OF THE SPEECH SERVICE IN THE GSM PUBLIC LAND MOBILE NETWORK (PLMN) SYSTEM
BS EN ISO 7840:2013 Small craft. Fire-resistant fuel hoses
CEI EN 60384-23 : 2016 FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 23: SECTIONAL SPECIFICATION - FIXED SURFACE MOUNT METALLIZED POLYETHYLENE NAPHTHALATE FILM DIELECTRIC DC CAPACITORS
I.S. EN 60269-1:2007 LOW-VOLTAGE FUSES - PART 1: GENERAL REQUIREMENTS
CAN/CSA-C22.2 NO. 60947-7-3:17 Low-voltage switchgear and controlgear ? Part 7-3: Ancillary equipment ? Safety requirements for fuse terminal blocks (Trinational standard NMX-J-538/7-3-ANCE with UL 60947-7-3)
I.S. EN 12261:2002 GAS METERS - TURBINE GAS METERS
I.S. EN ISO 11298-3:2011 PLASTICS PIPING SYSTEMS FOR RENOVATION OF UNDERGROUND WATER SUPPLY NETWORKS - PART 3: LINING WITH CLOSE-FIT PIPES
NF EN ISO 32100 : 2011 RUBBER- OR PLASTIC-COATED FABRICS - PHYSICAL AND MECHANICAL TESTS - DETERMINATION OF FLEX RESISTANCE BY THE FLEXOMETER METHOD
I.S. EN 60384-26:2010 FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 26: SECTIONAL SPECIFICATION - FIXED ALUMINIUM ELECTROLYTIC CAPACITORS WITH CONDUCTIVE POLYMER SOLID ELECTROLYTE
I.S. EN 60063:2015 PREFERRED NUMBER SERIES FOR RESISTORS AND CAPACITORS
ISO 4156-1:2005 Straight cylindrical involute splines Metric module, side fit Part 1: Generalities
UNE-EN 60317-0-10:2017 Specifications for particular types of winding wires - Part 0-10: General requirements - Polyester glass-fibre wound fused, unvarnished, or resin or varnish impregnated, bare or enamelled round copper wire
I.S. EN 60127-4:2005 MINIATURE FUSES - PART 4: UNIVERSAL MODULAR FUSE-LINKS (UMF) - THROUGH-HOLE AND SURFACE MOUNT TYPES (IEC 60127-4:2005 (EQV))
I.S. EN 60384-3:2016 FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 3: SECTIONAL SPECIFICATION - SURFACE MOUNT FIXED TANTALUM ELECTROLYTIC CAPACITORS WITH SOLID (MNO[2]) ELECTROLYTE
EN 60317-0-7:2017 Specifications for particular types of winding wires - Part 0-7: General requirements - Fully insulated (FIW) zero-defect enamelled round copper wire
NF EN 60269-6 : 2011 LOW-VOLTAGE FUSES - PART 6: SUPPLEMENTARY REQUIREMENTS FOR FUSE-LINKS FOR THE PROTECTION OF SOLAR PHOTOVOLTAIC ENERGY SYSTEMS
I.S. EN 132400:1994 SECTIONAL SPECIFICATION: FIXED CAPACITORS FOR ELECTROMAGNETIC INTERFERENCE SUPPRESSION AND CONNECTION TO THE SUPPLY MAINS (ASSESSMENT LEVEL D)
BS ISO 8779 : 2010 PLASTICS PIPING SYSTEMS - POLYETHYLENE (PE) PIPES FOR IRRIGATION - SPECIFICATIONS
CEI EN 60384-8 : 2016 FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 8: SECTIONAL SPECIFICATION: FIXED CAPACITORS OF CERAMIC DIELECTRIC, CLASS 1
EN ISO 15494:2015 Plastics piping systems for industrial applications - Polybutene (PB), polyethylene (PE), polyethylene of raised temperature resistance (PE-RT), crosslinked polyethylene (PE-X), polypropylene (PP) - Metric series for specifications for components and the system (ISO 15494:2015)
UNE-EN 60317-0-9:2016 Specifications for particular types of winding wires - Part 0-9: General requirements - Enamelled rectangular aluminium wire
CEI EN 60118-0 : 2016 ELECTROACOUSTICS - HEARING AIDS - PART 0: MEASUREMENT OF THE PERFORMANCE CHARACTERISTICS OF HEARING AIDS
EN ISO 7840:2013 Small craft - Fire-resistant fuel hoses (ISO 7840:2013)
UNI 10667-13 : 2013 PLASTIC RAW-SECONDARY MATERIALS FILLERS OBTAINED FROM GRINDING OF PRODUCTION AND/OR POST-CONSUMER WASTE OF REINFORCED PLASTICS COMPOSITES - PART 13: REQUIREMENTS AND TEST METHODS
ISO 16422:2014 Pipes and joints made of oriented unplasticized poly(vinyl chloride) (PVC-O) for the conveyance of water under pressure — Specifications
UNI EN ISO 13351 : 2010 FANS - DIMENSIONS
I.S. EN 60076-1:2011 POWER TRANSFORMERS - PART 1: GENERAL (IEC 60076-1:2011)
I.S. EN ISO 21003-1:2008 MULTILAYER PIPING SYSTEMS FOR HOT AND COLD WATER INSTALLATIONS INSIDE BUILDINGS - PART 1: GENERAL
ISO 6993-1:2006 Buried, high-impact poly(vinyl chloride) (PVC-HI) piping systems for the supply of gaseous fuels Part 1: Pipes for a maximum operating pressure of 1 bar (100 kPa)
UNE-EN 60269-6:2012 Low-voltage fuses - Part 6: Supplementary requirements for fuse-links for the protection of solar photovoltaic energy systems
ISO 12162:2009 Thermoplastics materials for pipes and fittings for pressure applications Classification, designation and design coefficient
ISO 8085-1:2001 Polyethylene fittings for use with polyethylene pipes for the supply of gaseous fuels Metric series Specifications Part 1: Fittings for socket fusion using heated tools
UNE-ISO 16422:2015 Pipes and joints made of oriented unplasticized poly(vinyl chloride) (PVC-O) for the conveyance of water under pressure. Specifications
EN ISO 8596:2018 Ophthalmic optics - Visual acuity testing -- Standard and clinical optotypes and their presentation (ISO 8596:2017)
ISO 4150:2011 Green coffee or raw coffee — Size analysis — Manual and machine sieving
NF EN 60317 0-3 : 2008 AMD 1 2014 SPECIFICATIONS FOR PARTICULAR TYPES OF WINDING WIRES - PART 0-3: GENERAL REQUIREMENTS - ENAMELLED ROUND ALUMINIUM WIRE
UNE-EN ISO 11297-3:2014 Plastics piping systems for renovation of underground drainage and sewerage networks under pressure - Part 3: Lining with close-fit pipes (ISO 11297-3:2013)
ANSI/ASA S3.7 : 2016 METHOD FOR MEASUREMENT AND CALIBRATION OF EARPHONES
ES 201 168 : 1.2.1 CORPORATE TELECOMMUNICATION NETWORKS (CN); TRANSMISSION CHARACTERISTICS OF DIGITAL PRIVATE BRANCH EXCHANGES (PBXS)
DIN EN ISO 8469:2013-12 SMALL CRAFT - NON-FIRE-RESISTANT FUEL HOSES (ISO 8469:2013)
DIN EN ISO 11297-3:2013-11 PLASTICS PIPING SYSTEMS FOR RENOVATION OF UNDERGROUND DRAINAGE AND SEWERAGE NETWORKS UNDER PRESSURE - PART 3: LINING WITH CLOSE-FIT PIPES (ISO 11297-3:2013)
BS ISO 10110-7:2008 Optics and photonics. Preparation of drawings for optical elements and systems Surface imperfection tolerances
UNE-EN ISO 32100:2011 Rubber- or plastics-coated fabrics - Physical and mechanical tests - Determination of flex resistance by the flexometer method (ISO 32100:2010)
XP I ETS 300245-4 : 99 XP INTEGRATED SERVICES DIGITAL NETWORK (ISDN) - TECHNICAL CHARACTERISTICS OF TELEPHONY TERMINALS - PART 4: ADDITIONAL EQUIPMENT INTERFACE (AEI)
I.S. EN 60384-9:2015 FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 9: SECTIONAL SPECIFICATION: FIXED CAPACITORS OF CERAMIC DIELECTRIC, CLASS 2
ISO 1452-1:2009 Plastics piping systems for water supply and for buried and above-ground drainage and sewerage under pressure Unplasticized poly(vinyl chloride) (PVC-U) Part 1: General
EN ISO 32100:2010 Rubber- or plastics-coated fabrics - Physical and mechanical tests - Determination of flex resistance by the flexometer method (ISO 32100:2010)
ISO 32100:2010 Rubber- or plastics-coated fabrics Physical and mechanical tests Determination of flex resistance by the flexometer method
I.S. EN 60384-4:2016 FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 4: SECTIONAL SPECIFICATION - FIXED ALUMINIUM ELECTROLYTIC CAPACITORS WITH SOLID (MNO[2]) AND NON-SOLID ELECTROLYTE
EN 300 175-8 : 2.6.1 DIGITAL ENHANCED CORDLESS TELECOMMUNICATIONS (DECT); COMMON INTERFACE (CI); PART 8: SPEECH AND AUDIO CODING AND TRANSMISSION
I.S. EN 60317-0-2:2014 SPECIFICATIONS FOR PARTICULAR TYPES OF WINDING WIRES - PART 0-2: GENERAL REQUIREMENTS - ENAMELLED RECTANGULAR COPPER WIRE
EN ISO 11298-3:2011 Plastics piping systems for renovation of underground water supply networks - Part 3: Lining with close-fit pipes (ISO 11298-3:2010)
I.S. EN 60384-13:2012 FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 13: SECTIONAL SPECIFICATION - FIXED POLYPROPYLENE FILM DIELECTRIC METAL FOIL D.C. CAPACITORS (IEC 60384-13:2011 (EQV))
ISO 8535-2:2003 Compression-ignition engines Steel tubes for high-pressure fuel injection pipes Part 2: Requirements for composite tubes
EN 60384-24:2015/AC:2017-01 FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 24: SECTIONAL SPECIFICATION - SURFACE MOUNT FIXED TANTALUM ELECTROLYTIC CAPACITORS WITH CONDUCTIVE POLYMER SOLID ELECTROLYTE (IEC 60384-24:2015/COR1:2016)
DIN EN ISO 1119:2012-04 Geometrical product specifications (GPS) - Series of conical tapers and taper angles (ISO 1119:2011)
DIN EN 14408-3:2004-12 PLASTICS PIPING SYSTEMS FOR RENOVATION OF UNDERGROUND GAS SUPPLY NETWORKS - PART 3: LINING WITH CLOSE-FIT PIPES
DIN EN ISO 10931:2015-11 PLASTICS PIPING SYSTEMS FOR INDUSTRIAL APPLICATIONS - POLY(VINYLIDENE FLUORIDE) (PVDF) - SPECIFICATIONS FOR COMPONENTS AND THE SYSTEM (ISO 10931:2005 + AMD 1:2015)
IEC 60127-7:2015 Miniature fuses - Part 7: Miniature fuse-links for special applications
BS EN 1452-1 : 2000 PLASTICS PIPING SYSTEMS FOR WATER SUPPLY - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) - PART 1: GENERAL
BS EN ISO 10931 : 2005 PLASTICS PIPING SYSTEMS FOR INDUSTRIAL APPLICATIONS - POLY(VINYLIDENE FLUORIDE) (PVDF) - SPECIFICATIONS FOR COMPONENTS AND THE SYSTEM
IEC 60317-0-4:2015 Specifications for particular types of winding wires - Part 0-4: General requirements - Glass-fibre wound, resin or varnish impregnated, bare or enamelled rectangular copper wire
BS EN ISO 2157:2016 Dentistry. Nominal diameters and designation code numbers for rotary instruments
UNE-EN 12201-1:2012 Plastics piping systems for water supply, and for drainage and sewerage under pressure - Polyethylene (PE) - Part 1: General
IEC 60034-30:2008 Rotating electrical machines - Part 30: Efficiency classes of single-speed, three-phase, cage-induction motors (IE-code)
IEC 60063:2015 Preferred number series for resistors and capacitors
UNE-EN ISO 1119:2012 Geometrical product specifications (GPS) - Series of conical tapers and taper angles (ISO 1119:2011)
BS EN 60317-0-5:2007 Specifications for particular types of winding wires General requirements. Glass-fibre braided resin or varnish impregnated, bare or enamelled rectangular copper wire
BS ISO/IEC TR 14252:1996 Information technology. Guide to the POSIX open system environment (OSE)
BS EN ISO 15493 : 2003 PLASTICS PIPING SYSTEMS FOR INDUSTRIAL APPLICATIONS - ACRYLONITRILE-BUTADIENE-STYRENE (ABS), UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) AND CHLORINATED POLY(VINYL CHLORIDE) (PVC-C) - SPECIFICATIONS FOR COMPONENTS AND THE SYSTEM - METRIC SERIES (ISO 15493:2003)
BS EN ISO 266:1997 Acoustics. Preferred frequencies
IEC 60317-53:2014 Specifications for particular types of winding wires - Part 53: Aromatic polyamide (aramid) tape wrapped rectangular copper wire, temperature index 220
BS EN ISO 1119:2011 Geometrical product specifications (GPS). Series of conical tapers and taper angles
IEC 60269-6:2010 Low-voltage fuses - Part 6: Supplementary requirements for fuse-links for the protection of solar photovoltaic energy systems
ISO 8029:2014 Plastics hose — General-purpose collapsible water hose, textile-reinforced — Specification
NF EN 60317-0-6 : 2002 AMD 1 2007 SPECIFICATIONS FOR PARTICULAR TYPES OF WINDING WIRES - PART 0-6: GENERAL REQUIREMENTS - GLASS-FIBER WOUND RESIN OR VARNISH IMPREGNATED, BARE OR ENAMELLED ROUND COPPER WIRE
EN 60317-0-10:2017 Specifications for particular types of winding wires - Part 0-10: General requirements - Polyester glass-fibre wound fused, unvarnished, or resin or varnish impregnated, bare or enamelled round copper wire
EN 60384-9:2015 Fixed capacitors for use in electronic equipment - Part 9: Sectional specification: Fixed capacitors of ceramic dielectric, Class 2
EN 60317-0-8 : 2012 SPECIFICATIONS FOR PARTICULAR TYPES OF WINDING WIRES - PART 0-8: GENERAL REQUIREMENTS - POLYESTER GLASS FIBRE WOUND, RESIN OR VARNISH IMPREGNATED OR NOT IMPREGNATED, BARE OR ENAMELLED RECTANGULAR COPPER WIRE (IEC 60317-0-8:2012)
EN 14154-1:2005+A2:2011 Water meters - Part 1: General requirements
EN 134100:1995 Sectional Specification: Variable capacitors (Qualification approval)
DIN EN ISO 2157:1995-04 DENTISTRY - NOMINAL DIAMETERS AND DESIGNATION CODE NUMBERS FOR ROTARY INSTRUMENTS (ISO 2157:2016)
EN 132400 : 1994 AMD 4 2001 SECTIONAL SPECIFICATION: FIXED CAPACITORS FOR ELECTROMAGNETIC INTERFERENCE SUPPRESSION AND CONNECTION TO THE SUPPLY MAINS (ASSESSMENT LEVEL D)
EN 60127-7:2016 Miniature fuses - Part 7: Miniature fuse-links for special applications
EN 60384-11:2008 Fixed capacitors for use in electronic equipment - Part 11: Sectional specification - Fixed polyethylene-terephthalate film dielectric metal foil d.c. capacitors
DIN ISO 96-1:2017-03 TEXTILE MACHINERY AND ACCESSORIES - RINGS AND TRAVELLERS FOR RING SPINNING AND RING TWISTING FRAMES - PART 1: FLANGE RINGS T AND SF AND THEIR TRAVELLERS (ISO 96-1:2016)
EN 60384-16:2005 Fixed capacitors for use in electronic equipment - Part 16: Sectional specification: Fixed metallized polypropylene film dielectric d.c. capacitors
EN 60317-44:1997/A1:2010 SPECIFICATIONS FOR PARTICULAR TYPES OF WINDING WIRES - PART 44: AROMATIC POLYIMIDE TAPE WRAPPED RECTANGULAR COPPER WIRE, CLASS 240
EN 60127-2:2014 Miniature fuses - Part 2: Cartridge fuse-links
DIN EN ISO 13590:2004-11 SMALL CRAFT - PERSONAL WATERCRAFT - CONSTRUCTION AND SYSTEM INSTALLATION REQUIREMENTS
DIN EN 10243-1:2000-06 STEEL DIE FORGINGS - TOLERANCES ON DIMENSIONS - PART 1: DROP AND VERTICAL PRESS FORGINGS
EN 62391-2:2006 Fixed electric double-layer capacitors for use in electronic equipment - Part 2: Sectional specification - Electric double-layer capacitors for power application
EN 60063 : 2015 Preferred number series for resistors and capacitors
CEN/TR 13259:2013 Gas welding equipment - Industrial manual and machine blowpipes for flame heating, flame brazing and allied processes
EN 60059:1999/A1:2009
EN 130200:1993/A3:1998 HARMONIZED SYSTEM OF QUALITY ASSESSMENT FOR ELECTRONIC COMPONENTS - SECTIONAL SPECIFICATION: FIXED TANTALUM CAPACITORS WITH NON-SOLID OR SOLID ELECTROLYTE
DIN EN ISO 11298-3:2011-07 PLASTICS PIPING SYSTEMS FOR RENOVATION OF UNDERGROUND WATER SUPPLY NETWORKS - PART 3: LINING WITH CLOSE-FIT PIPES
EN 143000 : 1991 THERMISTORS (GENERIC SPECIFICATION)
EN 60317-43:1997/A1:2010 SPECIFICATIONS FOR PARTICULAR TYPES OF WINDING WIRES - PART 43: AROMATIC POLYIMIDE TAPE WRAPPED ROUND COPPER WIRE, CLASS 240
EN 60317-0-4:2016 Specifications for particular types of winding wires - Part 0-4: General requirements - Glass-fibre wound, resin or varnish impregnated, bare or enamelled rectangular copper wire
EN 60384-21:2012 Fixed capacitors for use in electronic equipment - Part 21: Sectional specification - Fixed surface mount multilayer capacitors of ceramic dielectric, Class 1
EN 131200:2002 Sectional Specification: Fixed capacitors with metallized electrodes and polypropylene dielectric
EN 60034-30:2009 Rotating electrical machines - Part 30: Efficiency classes of single-speed, three-phase, cage-induction motors (IE-code)
EN 60384-4:2016 Fixed capacitors for use in electronic equipment - Part 4: Sectional specification - Fixed aluminium electrolytic capacitors with solid (MnO2) and non-solid electrolyte
DIN EN ISO 11299-3:2013-05 PLASTICS PIPING SYSTEMS FOR RENOVATION OF UNDERGROUND GAS SUPPLY NETWORKS - PART 3: LINING WITH CLOSE-FIT PIPES (ISO 11299-3:2011)
EN 60317-0-5:2007 Specifications for particular types of winding wires - Part 0-5: General requirements - Glass-fibre braided resin or varnish impregnated, bare or enamelled rectangular copper wire
DIN EN 14154-1:2011-06 WATER METERS - PART 1: GENERAL REQUIREMENTS
EN 60076-1:2011 POWER TRANSFORMERS - PART 1: GENERAL (IEC 60076-1:2011)
DIN EN 10243-2:2000-06 Steel die forgings - Tolerances on dimensions - Part 2: Upset forgings made on horizontal forging machines; German version EN 10243-2:1999
EN 60118-0:2015 Electroacoustics - Hearing aids - Part 0: Measurement of the performance characteristics of hearing aids
EN 60384-17:2005 Fixed capacitors for use in electronic equipment - Part 17: Sectional specification: Fixed metallized polypropylene film dielectric a.c. and pulse capacitors
DIN EN 61558-2-17 : 1998 SAFETY OF POWER TRANSFORMERS, POWER SUPPLY UNITS AND SIMILAR - PART 2-17: PARTICULAR REQUIREMENTS FOR TRANSFORMERS FOR SWITCH MODE POWER SUPPLIES
DIN EN ISO 6224:2012-02 Thermoplastics hoses, textile-reinforced, for general-purpose water applications - Specification (ISO 6224:2011)
EN 60384-19:2015 Fixed capacitors for use in electronic equipment - Part 19: Sectional specification: Fixed metallized polyethylene-terephthalate film dielectric surface mount d.c. capacitors
EN 60127-6:2014 Miniature fuses - Part 6: Fuse-holders for miniature fuse-links
EN 60852-4:1996 Outline dimensions of transformers and inductors for use in telecommunication and electronic equipment - Part 4: Transformers and inductors using YUI-2 laminations
EN 129200 : 1994 AMD 1 1995 SECTIONAL SPECIFICATION: FIXED INDUCTORS WITH CERAMIC OR FERRITE CORE WOUND WITH COPPER WIRE FOR RF CIRCUITS
DIN EN ISO 4064-1:2017-10 WATER METERS FOR COLD POTABLE WATER AND HOT WATER - PART 1: METROLOGICAL AND TECHNICAL REQUIREMENTS (ISO 4064-1:2014)
EN 60317-0-3:2008/A1:2013 SPECIFICATIONS FOR PARTICULAR TYPES OF WINDING WIRES - PART 0-3: GENERAL REQUIREMENTS - ENAMELLED ROUND ALUMINIUM WIRE (IEC 60317-0-3:2008/A1:2013)
EN 60384-26 : 2010 FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 26: SECTIONAL SPECIFICATION - FIXED ALUMINIUM ELECTROLYTIC CAPACITORS WITH CONDUCTIVE POLYMER SOLID ELECTROLYTE
EN 60384-15:2017 Fixed capacitors for use in electronic equipment - Part 15: Sectional specification: Fixed tantalum capacitors with non-solid or solid electrolyte
DIN EN ISO 5172:2015-12 GAS WELDING EQUIPMENT - BLOWPIPES FOR GAS WELDING, HEATING AND CUTTING - SPECIFICATIONS AND TESTS (ISO 5172:2006 + AMD 1:2012 + AMD 2:2015)
EN 140000 : 1993 GENERIC SPECIFICATION: FIXED RESISTORS
BS CECC 40000:1980 Harmonized system of quality assessment for electronic components. Generic specification: fixed resistors
BS 88-4(1988) : 1988 AMD 14545 CARTRIDGE FUSES FOR VOLTAGES UP TO AND INCLUDING 1000 V A.C. AND 1500 V D.C. - SPECIFICATION OF SUPPLEMENTARY REQUIREMENTS FOR FUSE-LINKS FOR THE PROTECTION OF SEMICONDUCTOR DEVICES
BS 88-1(1988) : 1988 AMD 8310 CARTRIDGE FUSES FOR VOLTAGES UP TO AND INCLUDING 1000 V a.c. AND 1500 V d.c. - SPECIFICATION OF GENERAL REQUIREMENTS
BS 88-4(2007) : 2007 LOW-VOLTAGE FUSES - PART 4: SUPPLEMENTARY REQUIREMENTS FOR FUSE-LINKS FOR THE PROTECTION OF SEMICONDUCTOR DEVICES
ASME B1.13M:2005 METRIC SCREW THREADS - M PROFILE
ASME B32.100 : 2016 PREFERRED METRIC SIZES FOR FLAT, ROUND, SQUARE, RECTANGULAR AND HEXAGONAL METAL PRODUCTS
ASME B1.13M : 2005 (R2015) METRIC SCREW THREADS - M PROFILE
BS CECC 30200:1986 Harmonized system of quality assessment for electronic components. Sectional specification: fixed tantalum capacitors with non-solid or solid electrolyte
BS 4265:1977 Specification for cartridge fuse links for miniature fuses
BS 4944(1994) : 1994 AMD 8405 REACTORS
BS CECC 30000:1992 Harmonized system of quality assessment for electronic components. Generic specification: fixed capacitors
BS CECC 30000:1984 Harmonized system of quality assessment for electronic components: generic specification: fixed capacitors
ASME B1.13M : 2005 : R2010 METRIC SCREW THREADS - M PROFILE
CEI EN 60115-1:2023 Fixed resistors for use in electronic equipment Part 1: Generic specification
BS 88-4(2009) : 2009 + A2 2016 LOW-VOLTAGE FUSES - PART 4: SUPPLEMENTARY REQUIREMENTS FOR FUSE-LINKS FOR THE PROTECTION OF SEMICONDUCTOR DEVICES (IEC 60269-4:2009)
BS 88-1(2007) : 2007 LOW-VOLTAGE FUSES - PART 1: GENERAL REQUIREMENTS

AS/NZS 1335:2020 Gas welding equipment - Rubber hoses for welding, cutting and allied processes

View more information
$79.15
Including GST where applicable

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.

Need help?
Call us on 131 242, then click here to start a Screen Sharing session
so we can help right away! Learn more