ISO 3302-1:2014
Current
Current
The latest, up-to-date edition.
Rubber — Tolerances for products — Part 1: Dimensional tolerances
Available format(s)
Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users
Language(s)
French, English
Published date
11-07-2014
ISO 3302-1:2014 specifies classes of dimensional tolerances and their values for moulded, extruded, and calendared solid rubber products. The relevant test methods necessary for the establishment of compliance with ISO 3302-1:2014 are also specified.
The tolerances are primarily intended for use with vulcanized rubber but can also be suitable for products made of thermoplastic rubbers.
ISO 3302-1:2014 does not apply to precision toroidal sealing rings or to calendared composite products such as rubber-coated fabrics or products where a rubber coating is applied by the process of topping or skim coating.
| Committee |
ISO/TC 45/SC 4
|
| DevelopmentNote |
Supersedes ISO 3302 (04/2001) Supersedes ISO/DIS 3302-1. (07/2014)
|
| DocumentType |
Standard
|
| Pages |
10
|
| PublisherName |
International Organization for Standardization
|
| Status |
Current
|
| Supersedes |
| Standards | Relationship |
| DIN ISO 3302-1:2018-06 | Identical |
| IS 16752 : 2018 | Identical |
| SS-ISO 3302-1:2016 | Identical |
| NF ISO 3302-1 : 2014 | Identical |
| BS ISO 3302-1:2014 | Identical |
| NEN ISO 3302-1 : 2014 | Identical |
| UNE-ISO 3302-1:2023 | Identical |
| SAC GB/T 3672.1 : 2002 | Identical |
| DIN ISO 3302-1:2016-10 (Draft) | Identical |
| UNE 53508-1:2011 | Identical |
| DIN 53534:2000-04 | Corresponds |
| 99/123581 DC : DRAFT OCT 1999 | ISO/DIS 4633 - RUBBER SEALS - JOINT RINGS FOR WATER SUPPLY, DRAINAGE AND SEWERAGE PIPELINES - SPECIFICATION FOR MATERIALS |
| ISO 11040-5:2012 | Prefilled syringes — Part 5: Plunger stoppers for injectables |
| BS ISO 11040-5:2012 | Prefilled syringes Plunger stoppers for injectables |
| BS F 152:2006 | Properties of silicone rubber sheet, mouldings and extrusions (general purpose). Specification |
| BS ISO 11040-3:2012 | Prefilled syringes Seals for dental local anaesthetic cartridges |
| DIN ISO 11040-5:2013-12 | PREFILLED SYRINGES - PART 5: PLUNGER STOPPERS FOR INJECTABLES (ISO 11040-5:2012) |
| 03/105599 DC : DRAFT MAY 2003 | BS ISO 23529 - RUBBER - GENERAL CONDITIONS AND PROCEDURES FOR PHYSICAL TEST METHODS |
| UNE-EN ISO 8362-5:2016 | Injection containers and accessories - Part 5: Freeze drying closures for injection vials (ISO 8362-5:2016) |
| 10/30216993 DC : 0 | BS EN 295-4 - VITRIFIED CLAY PIPE SYSTEMS FOR DRAINS AND SEWERS - PART 4: REQUIREMENTS FOR ADAPTORS, CONNECTORS AND FLEXIBLE COUPLINGS |
| 05/30130019 DC : DRAFT JULY 2005 | BS F 154 - PROPERTIES OF FLUOROSILICONE RUBBER SHEET, MOULDINGS AND EXTRUSIONS - SPECIFICATION |
| BS EN 14840:2005 | Joint fillers and sealants. Test methods for preformed joint seals |
| 09/30193399 DC : DRAFT MAY 2009 | BS ISO 23529 - RUBBER - GENERAL PROCEDURES FOR PREPARING AND CONDITIONING TEST PIECES FOR PHYSICAL TEST METHODS |
| BS ISO 9631:2018 | Rubber seals. Joint rings for pipelines for hot-water supply up to 110 °C. Specification for the material |
| BS F 156:2006 | Properties of fluid resistant ethylene-propylene rubber sheet, mouldings and extrusions. Specification |
| I.S. EN 16397-2:2014 | FLEXIBLE COUPLINGS - PART 2: CHARACTERISTICS AND TESTING FOR METAL BANDED FLEXIBLE COUPLINGS, ADAPTORS AND BUSHES |
| DIN ISO 23529:2012-10 | RUBBER - GENERAL PROCEDURES FOR PREPARING AND CONDITIONING TEST PIECES FOR PHYSICAL TEST METHODS (ISO 23529:2010) |
| UNE-EN 16397-2:2015 | Flexible couplings - Part 2: Characteristics and testing for metal banded flexible couplings, adaptors and bushes |
| ISO 19013-1:2005 | Rubber hoses and tubing for fuel circuits for internal combustion engines Specification Part 1: Diesel fuels |
| BS EN 681-2:2000 | Elastomeric seals. Material requirements for pipe joint seals used in water and drainage applications Thermoplastic elastomers |
| ONORM EN ISO 8536-2 : 2010 | INFUSION EQUIPMENT FOR MEDICAL USE - PART 2: CLOSURES FOR INFUSION BOTTLES |
| DEFSTAN 02-337(PT1)/2(2014) : 2014 | REQUIREMENTS FOR ELASTOMERIC TOROIDAL SEALING RINGS ('O'-RINGS) - PART 1: GENERAL AND SURFACE FINISH STANDARDS RELATIVE TO MANUFACTURER |
| NF EN ISO 8536-2 : 2010 | INFUSION EQUIPMENT FOR MEDICAL USE - PART 2: CLOSURES FOR INFUSION BOTTLES |
| DEFSTAN 93-55/3(2009) : 2009 | BUTYL RUBBER, TYPE NBC |
| BS ISO 5892:2013 | Rubber building gaskets. Materials for preformed solid vulcanized structural gaskets. Specification |
| ISO 17613-1:2006 | Manually operated pumps for drinking water Selection and acceptance Part 1: Southeast Asia |
| PREN 681-1 : DRAFT 2016 | ELASTOMERIC SEALS - MATERIAL REQUIREMENTS FOR PIPE JOINT SEALS USED IN WATER AND DRAINAGE APPLICATIONS - PART 1: VULCANIZED RUBBER |
| BS EN 16397-2:2014 | Flexible couplings Characteristics and testing for metal banded flexible couplings, adaptors and bushes |
| 10/30167702 DC : 0 | BS ISO 4635 - RUBBER, VULCANIZED - PREFORMED JOINT SEALS FOR USE BETWEEN CONCRETE HIGHWAY PAVING SECTIONS - SPECIFICATION |
| ISO 11040-3:2012 | Prefilled syringes — Part 3: Seals for dental local anaesthetic cartridges |
| ISO 9631:2018 | Rubber seals — Joint rings for pipelines for hot-water supply up to 110 °C — Specification for the material |
| BS EN 295-4:2013 | Vitrified clay pipe systems for drains and sewers Requirements for adaptors, connectors and flexible couplings |
| I.S. EN ISO 8536-2:2010 | INFUSION EQUIPMENT FOR MEDICAL USE - PART 2: CLOSURES FOR INFUSION BOTTLES |
| DIN EN 681-4:2006-11 | Elastomeric seals - Material requirements for pipe joint seals used in water and drainage applications - Part 4: Cast polyurethane sealing elements |
| DIN EN 681-3:2006-11 | Elastomeric seals - Material requirements for pipe joint seals used in water and drainage applications - Part 3: Cellular materials of vulcanized rubber |
| I.S. EN 295-4:2013 | VITRIFIED CLAY PIPE SYSTEMS FOR DRAINS AND SEWERS - PART 4: REQUIREMENTS FOR ADAPTORS, CONNECTORS AND FLEXIBLE COUPLINGS |
| DIN EN 681-2:2006-11 | Elastomeric seals - Material requirements for pipe joint seals used in water and drainage applications - Part 2: Thermoplastic elastomers |
| 03/118042 DC : DRAFT NOV 2003 | EN 14840 - JOINT FILLERS AND SEALANTS - TEST METHODS FOR PREFORMED JOINT SEALS |
| BS F 157:2006 | Properties of high tear strength silicone rubber sheet, mouldings and extrusions. Specification |
| 03/308003 DC : DRAFT JUNE 2003 | ISO 22762-3 - ELASTOMERIC SEISMIC-PROTECTION ISOLATORS - PART 3: APPLICATIONS FOR BUILDINGS - SPECIFICATIONS |
| 12/30235141 DC : 0 | BS ISO 5892 - RUBBER BUILDING GASKETS - MATERIALS FOR PREFORMED SOLID VULCANIZED STRUCTURAL GASKETS - SPECIFICATION |
| 15/30317651 DC : 0 | BS ISO 11424 - RUBBER HOSES AND TUBING FOR AIR AND VACUUM SYSTEMS FOR INTERNAL-COMBUSTION ENGINES - SPECIFICATION |
| DIN EN ISO 8362-2:2016-02 | Injection containers and accessories - Part 2: Closures for injection vials (ISO 8362-2:2015) |
| 14/30293931 DC : 0 | BS ISO 19013-2 - RUBBER HOSES AND TUBING FOR FUEL CIRCUITS FOR INTERNAL COMBUSTION ENGINES - SPECIFICATION - PART 2: GASOLINE FUELS |
| DIN ISO 8362-5:2011-06 | INJECTION CONTAINERS AND ACCESSORIES - PART 5: FREEZE DRYING CLOSURES FOR INJECTION VIALS |
| DIN 3489:2001-11 | Couplings for compressed air - Claw coupling, 42 mm internal width, without securing nut - Coupling with male, female, hose and closure connection ends, rotary claw couplings, joint ring |
| BS ISO 17613-1:2006 | Manually operated pumps for drinking water. Selection and acceptance Southeast Asia |
| BS EN ISO 8362-5:2016 | Injection containers and accessories Freeze drying closures for injection vials |
| BS ISO 11424:2017 | Rubber hoses and tubing for air and vacuum systems for internal-combustion engines. Specification |
| ISO 9553:1997 | Solar energy — Methods of testing preformed rubber seals and sealing compounds used in collectors |
| BS ISO 22762-3:2005 | Elastomeric seismic-protection isolators Applications for buildings. Specifications |
| PREN 295-4 : DRAFT 2010 | VITRIFIED CLAY PIPE SYSTEMS FOR DRAINS AND SEWERS - PART 4: REQUIREMENTS FOR ADAPTORS, CONNECTORS AND FLEXIBLE COUPLINGS |
| UNI EN 16397-2 : 2014 | FLEXIBLE COUPLINGS - PART 2: CHARACTERISTICS AND TESTING FOR METAL BANDED FLEXIBLE COUPLINGS, ADAPTORS AND BUSHES |
| ISO 4633:2015 | Rubber seals — Joint rings for water supply, drainage and sewerage pipelines — Specification for materials |
| ISO 16010:2005 | Elastomeric seals Material requirements for seals used in pipes and fittings carrying gaseous fuels and hydrocarbon fluids |
| ISO 23529:2016 | Rubber General procedures for preparing and conditioning test pieces for physical test methods |
| DIN EN 14188-3:2006-04 | Joint fillers and sealants - Part 3: Specifications for preformed joint seals |
| DIN EN 295-4:2013-05 | VITRIFIED CLAY PIPE SYSTEMS FOR DRAINS AND SEWERS - PART 4: REQUIREMENTS FOR ADAPTORS, CONNECTORS AND FLEXIBLE COUPLINGS |
| DIN EN 682:2006-10 | Elastomeric seals - Material requirements for seals used in pipes and fittings carrying gas and hydrocarbon fluids |
| BS EN 681-4:2000 | Elastomeric seals. Material requirements for pipe joint seals used in water and drainage applications Cast polyurethane sealing elements |
| UNI EN ISO 8536-2 : 2010 | INFUSION EQUIPMENT FOR MEDICAL USE - PART 2: CLOSURES FOR INFUSION BOTTLES |
| UNI EN 295-4 : 2013 | VITRIFIED CLAY PIPE SYSTEMS FOR DRAINS AND SEWERS - PART 4: REQUIREMENTS FOR ADAPTORS, CONNECTORS AND FLEXIBLE COUPLINGS |
| UNI 11401 : 2011 | GUIDELINE FOR THERMAL BREAK PROFILES |
| DIN EN 16397-2:2015-01 | FLEXIBLE COUPLINGS - PART 2: CHARACTERISTICS AND TESTING FOR METAL BANDED FLEXIBLE COUPLINGS, ADAPTORS AND BUSHES |
| DIN ISO 15759:2006-05 | Medical infusion equipment - Plastics caps with inserted elastomeric liner for containers manufactured by the blow-fill-seal (BFS) process (ISO 15759:2005) |
| BS F 153:2006 | Properties of oil resistant silicone rubber sheet, mouldings and extrusions. Specification |
| BS ISO 23529:2016 | Rubber. General procedures for preparing and conditioning test pieces for physical test methods |
| 12/30258206 DC : 0 | BS EN 16397-2 - FLEXIBLE COUPLINGS - PART 2: MATERIALS AND DIMENSIONS FOR METAL BANDED FLEXIBLE COUPLINGS |
| 14/30304354 DC : 0 | BS EN ISO 8362-5 - INJECTION CONTAINERS AND ACCESSORIES - PART 5: FREEZE DRYING CLOSURES FOR INJECTION VIALS |
| BS F 154:2006 | Properties of fluorosilicone rubber sheet, mouldings and extrusions. Specification |
| 16/30320762 DC : 0 | BS EN 1097-2 - TESTS FOR MECHANICAL AND PHYSICAL PROPERTIES OF AGGREGATES - PART 2: METHODS FOR THE DETERMINATION OF RESISTANCE TO FRAGMENTATION |
| BS EN ISO 8362-2:2015 | Injection containers and accessories Closures for injection vials |
| BS ISO 13926-2:2017 | Pen systems Plunger stoppers for pen-injectors for medical use |
| 16/30334927 DC : 0 | BS ISO 23529 - RUBBER - GENERAL PROCEDURES FOR PREPARING AND CONDITIONING TEST PIECES FOR PHYSICAL TEST METHODS |
| DIN EN ISO 8362-5:2016-07 | INJECTION CONTAINERS AND ACCESSORIES - PART 5: FREEZE DRYING CLOSURES FOR INJECTION VIALS (ISO 8362-5:2016) |
| 04/30112025 DC : DRAFT APR 2004 | ISO 16010 - ELASTOMERIC SEALS - MATERIAL REQUIREMENTS FOR SEALS USED IN PIPES AND FITTINGS CARRYING GAS AND HYDROCARBON FLUIDS |
| NF ISO 8362-5 : 2008 | INJECTION CONTAINERS AND ACCESSORIES - PART 5: FREEZE DRYING CLOSURES FOR INJECTION VIALS |
| BS ISO 19013-1:2005 | Rubber hoses and tubing for fuel circuits for internal combustionengines . Specification Diesel fuels |
| I.S. EN ISO 8362-5:2016 | INJECTION CONTAINERS AND ACCESSORIES - PART 5: FREEZE DRYING CLOSURES FOR INJECTION VIALS (ISO 8362-5:2016) |
| 16/30318653 DC : 0 | BS EN 681-1 - ELASTOMERIC SEALS - MATERIAL REQUIREMENTS FOR PIPE JOINT SEALS USED IN WATER AND DRAINAGE APPLICATIONS - PART 1: VULCANIZED RUBBER |
| 18/30368675 DC : 0 | BS EN 1097-2 - TESTS FOR MECHANICAL AND PHYSICAL PROPERTIES OF AGGREGATES - PART 2: METHODS FOR THE DETERMINATION OF RESISTANCE TO FRAGMENTATION |
| ISO 19013-2:2016 | Rubber hoses and tubing for fuel circuits for internal combustion engines Specification Part 2: Gasoline fuels |
| ISO 23711:2003 | Elastomeric seals — Requirements for materials for pipe joint seals used in water and drainage applications — Thermoplastic elastomers |
| ISO 11424:2017 | Rubber hoses and tubing for air and vacuum systems for internal-combustion engines — Specification |
| ISO 13926-2:2017 | Pen systems — Part 2: Plunger stoppers for pen-injectors for medical use |
| I.S. EN ISO 8362-2:2015 | INJECTION CONTAINERS AND ACCESSORIES - PART 2: CLOSURES FOR INJECTION VIALS (ISO 8362-2:2015) |
| DIN EN ISO 8536-2:2010-08 | Infusion equipment for medical use - Part 2: Closures for infusion bottles (ISO 8536-2:2010) |
| DIN EN 1097-2:2016-07 (Draft) | TESTS FOR MECHANICAL AND PHYSICAL PROPERTIES OF AGGREGATES - PART 2: METHODS FOR THE DETERMINATION OF RESISTANCE TO FRAGMENTATION |
| I.S. EN 1097-2:2010 | TESTS FOR MECHANICAL AND PHYSICAL PROPERTIES OF AGGREGATES - PART 2: METHODS FOR THE DETERMINATION OF RESISTANCE TO FRAGMENTATION |
| ISO 8536-2:2010 | Infusion equipment for medical use — Part 2: Closures for infusion bottles |
| BS EN 681-3:2000 | Elastomeric seals. Materials requirements for pipe joint seals used in water and drainage applications Cellular materials of vulcanized rubber |
| UNI EN 1097-2 : 2010 | TESTS FOR MECHANICAL AND PHYSICAL PROPERTIES OF AGGREGATES - PART 2: METHODS FOR THE DETERMINATION OF RESISTANCE TO FRAGMENTATION |
| BS EN 14188-3 : 2005 | JOINT FILLERS AND SEALANTS - PART 3: SPECIFICATIONS FOR PREFORMED JOINT SEALS |
| ISO 8362-5:2016 | Injection containers and accessories Part 5: Freeze drying closures for injection vials |
| ISO 8362-2:2015 | Injection containers and accessories — Part 2: Closures for injection vials |
| BS EN ISO 8536-2:2010 | Infusion equipment for medical use Closures for infusion bottles |
| BS EN 1097-2:2010 | Tests for mechanical and physical properties of aggregates Methods for the determination of resistance to fragmentation |
| BS EN 682:2002 | Elastomeric seals. Materials requirements for seals used in pipes and fi ttings carrying gas and hydrocarbon fluids |
| EN 14188-3 : 2006 | JOINT FILLERS AND SEALANTS - PART 3: SPECIFICATIONS FOR PREFORMED JOINT SEALS |
| EN ISO 8536-2:2010 | Infusion equipment for medical use - Part 2: Closures for infusion bottles (ISO 8536-2:2010) |
| EN 14840 : 2005 | JOINT FILLERS AND SEALANTS - TEST METHODS FOR PREFORMED JOINT SEALS |
| EN ISO 8362-5:2016 | Injection containers and accessories - Part 5: Freeze drying closures for injection vials (ISO 8362-5:2016) |
| EN 16397-2:2014 | Flexible couplings - Part 2: Characteristics and testing for metal banded flexible couplings, adaptors and bushes |
| EN 295-4:2013 | Vitrified clay pipe systems for drains and sewers - Part 4: Requirements for adaptors, connectors and flexible couplings |
| EN ISO 8362-2:2015 | Injection containers and accessories - Part 2: Closures for injection vials (ISO 8362-2:2015) |
| 03/308002 DC : DRAFT JUNE 2003 | ISO 22762-2 - ELASTOMERIC SEISMIC-PROTECTION ISOLATORS - PART 2: APPLICATIONS FOR BRIDGES - SPECIFICATIONS |
| 03/118041 DC : DRAFT NOV 2003 | EN 14188-3 - JOINT FILLERS AND SEALANTS - PART 3: SPECIFICATION FOR PREFORMED JOINT SEALS |
| BS ISO 19013-2:2005 | Rubber hoses and tubing for fuel circuits for internal combustion engines. Specification Gasoline fuels |
| 14/30301958 DC : 0 | BS EN ISO 8362-2 - INJECTION CONTAINERS AND ACCESSORIES - PART 2: CLOSURES FOR INJECTION |
| ISO 4635:2011 | Rubber, vulcanized Preformed joint seals for use between concrete paving sections of highways Specification |
| BS ISO 22762-2:2005 | Elastomeric seismic-protection isolators Applications for bridges. Specifications |
| I.S. EN 14840:2005 | JOINT FILLERS AND SEALANTS - TEST METHODS FOR PREFORMED JOINT SEALS |
| ISO 5892:2013 | Rubber building gaskets — Materials for preformed solid vulcanized structural gaskets — Specification |
| ISO 15759:2005 | Medical infusion equipment — Plastics caps with inserted elastomeric liner for containers manufactured by the blow-fill-seal (BFS) process |
| EN 1097-2:2010 | Tests for mechanical and physical properties of aggregates - Part 2: Methods for the determination of resistance to fragmentation |
| UNE-EN 295-4:2013 | Vitrified clay pipe systems for drains and sewers - Part 4: Requirements for adaptors, connectors and flexible couplings |
| DIN 7865-1:2015-02 | ELASTOMERIC-WATERSTOPS FOR SEALING JOINTS IN CONCRETE - PART 1: SHAPES AND DIMENSIONS |
| DIN EN 14840:2005-12 | Joint fillers and sealants - Test methods for preformed joint seals |
Important note : All end users must be registered with an Account prior to user licenses being assigned.Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.