Customer Support: 131 242

  • There are no items in your cart
We noticed you’re not on the correct regional site. Switch to our AMERICAS site for the best experience.
Dismiss alert

ISO 472:2013

Current

Current

The latest, up-to-date edition.

Plastics Vocabulary

Available format(s)

Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users

Language(s)

Russian, English - French, English

Published date

30-01-2013

ISO 472:2013 defines terms used in the plastics industry, including terms and definitions appearing in plastics standards (of ISO/TC 61) and general terms and definitions of polymer science used in all aspects of plastics technology.

In addition to terms in English and French (two of the three official ISO languages), this vocabulary includes the equivalent terms in German; these have been included under the responsibility of the member body for Germany (DIN). However, only the terms and definitions in the official languages can be considered as ISO terms and definitions.

DevelopmentNote
Supersedes ISO/DIS 472. (01/2013)
DocumentType
Standard
Pages
170
PublisherName
International Organization for Standardization
Status
Current
Supersedes

13/30280703 DC : 0 BS EN 1329-1 - PLASTICS PIPING SYSTEMS FOR SOIL AND WASTE DISCHARGE (LOW AND HIGH TEMPERATURE) WITHIN THE BUILDING STRUCTURE - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) - PART 1: SPECIFICATIONS FOR PIPES, FITTINGS AND THE SYSTEM
07/30148618 DC : 0 BS ISO 22007-1 - PLASTICS - DETERMINATION OF THERMAL CONDUCTIVITY AND THERMAL DIFFUSIVITY - PART 1: GENERAL PRINCIPLES
DIN EN ISO 22007-6 E : 2015 PLASTICS - DETERMINATION OF THERMAL CONDUCTIVITY AND THERMAL DIFFUSIVITY - PART 6: COMPARATIVE METHOD FOR LOW THERMAL CONDUCTIVITIES USING A TEMPERATURE-MODULATION TECHNIQUE (ISO 22007-6:2014)
07/30169818 DC : 0 BS EN 1013 - LIGHT TRANSMITTING SINGLE SKIN PROFILED PLASTICS SHEETS FOR INTERNAL AND EXTERNAL ROOFS, WALLS AND CEILINGS - REQUIREMENTS AND TEST METHODS
BS ISO 17221:2014 Plastics. Determination of image clarity (degree of sharpness of reflected or transmitted image)
BS EN 1519-1:2000 Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure. Polyethylene (PE) Specifications for pipes, fittings and the system
BS ISO 15040:1999 Composites. Prepregs. Determination of gel time
BS EN ISO 16396-2:2017 Plastics. Polyamide (PA) moulding and extrusion materials Preparation of test specimens and determination of properties
BS EN ISO 3451-1:1997 Plastics. Determination of ash General methods
ONORM EN ISO 11357-6 : 2013 PLASTICS - DIFFERENTIAL SCANNING CALORIMETRY (DSC) - PART 6: DETERMINATION OF OXIDATION INDUCTION TIME (ISOTHERMAL OIT) AND OXIDATION INDUCTION TEMPERATURE (DYNAMIC OIT) (ISO 11357-6:2008)
ISO 17088:2012 Specifications for compostable plastics
03/105582 DC : DRAFT APR 2003 ISO 11357-4 - PLASTICS - DIFFERENTIAL SCANNING CALORIMETRY (DSC) - PART 4: DETERMINATION OF SPECIFIC HEAT CAPACITY
BS EN ISO 11357-7:2015 Plastics. Differential scanning calorimetry (DSC) Part 7: Determination of crystallization kinetics
DIN EN 13245-3:2010-11 Plastics - Unplasticized poly(vinyl chloride) (PVC-U) profiles for building applications - Part 3: Designation of PVC-UE profiles
DIN EN ISO 178 E : 2013 PLASTICS - DETERMINATION OF FLEXURAL PROPERTIES (ISO 178:2010 + AMD.1:2013)
BS ISO 30021:2013 Plastics. Burning behavior. Intermediate-scale fire-resistance testing of fibre-reinforced polymer composites
PD CEN ISO/TS 80004-6:2015 Nanotechnologies. Vocabulary Nano-object characterization
PREN 1451-1 : DRAFT 2016 PLASTICS PIPING SYSTEMS FOR SOIL AND WASTE DISCHARGE (LOW AND HIGH TEMPERATURE) WITHIN THE BUILDING STRUCTURE - POLYPROPYLENE (PP) - PART 1: SPECIFICATIONS FOR PIPES, FITTINGS AND THE SYSTEM
I.S. EN 1519-1:1999 PLASTICS PIPING SYSTEMS FOR SOIL AND WASTE DISCHARGE (LOW AND HIGH TEMPERATURE) WITHIN THE BUILDING STRUCTURE - POLYETHYLENE (PE) - PART 1: SPECIFICATIONS FOR PIPES, FITTINGS AND THE SYSTEM
08/30191997 DC : 0 BS ISO 1043-1 - PLASTICS - SYMBOLS AND ABBREVIATED TERMS - PART 1: BASIC POLYMERS AND THEIR SPECIAL CHARACTERISTICS
PREN ISO 14910-1 : DRAFT 2010 PLASTICS - THERMOPLASTIC POLYESTER/ESTER AND POLYETHER/ESTER ELASTOMERS FOR MOULDING AND EXTRUSION - PART 1: DESIGNATION SYSTEM AND BASIS FOR SPECIFICATIONS
DIN EN ISO 16014-5:2012-10 PLASTICS - DETERMINATION OF AVERAGE MOLECULAR MASS AND MOLECULAR MASS DISTRIBUTION OF POLYMERS USING SIZE-EXCLUSION CHROMATOGRAPHY - PART 5: METHOD USING LIGHT-SCATTERING DETECTION (ISO 16014-5:2012)
03/105580 DC : DRAFT APR 2003 ISO 20965 - PLASTICS - DETERMINATION OF THE TRANSIENT EXTENSIONAL VISCOSITY OF POLYMER MELTS
BS EN 60903:2003 Live working. Gloves of insulating material
UNI EN ISO 21003-1 : 2009 MULTILAYER PIPING SYSTEMS FOR HOT AND COLD WATER INSTALLATIONS INSIDE BUILDINGS - PART 1: GENERAL
13/30240164 DC : 0 BS ISO 16365-1 - PLASTICS - THERMOPLASTIC POLYURETHANES FOR MOULDING AND EXTRUSION - PART 1: DESIGNATION SYSTEM AND BASIS FOR SPECIFICATIONS
12/30257998 DC : 0 BS ISO 11357-2 - PLASTICS - DIFFERENTIAL SCANNING CALORIMETRY (DSC) - PART 2: DETERMINATION OF GLASS TRANSITION TEMPERATURE AND GLASS TRANSITION STEP HEIGHT
16/30342057 DC : 0 BS EN 17033 - PLASTICS - BIODEGRADABLE MULCH FILMS FOR USE IN AGRICULTURE AND HORTICULTURE - REQUIREMENTS AND TEST METHODS
BS ISO 16525-7:2014 Adhesives. Test methods for isotropic electrically conductive adhesives Environmental test methods
I.S. EN ISO 11357-7:2015 PLASTICS - DIFFERENTIAL SCANNING CALORIMETRY (DSC) - PART 7: DETERMINATION OF CRYSTALLIZATION KINETICS (ISO 11357-7:2015)
17/30350548 DC : 0 BS EN ISO 11357-6 - PLASTICS - DIFFERENTIAL SCANNING CALORIMETRY (DSC) - PART 6: DETERMINATION OF OXIDATION INDUCTION TIME (ISOTHERMAL OIT) AND OXIDATION INDUCTION TEMPERATURE (DYNAMIC OIT)
BS ISO 8516:2011 Textile glass. Textured yarns. Basis for a specification
16/30336859 DC : 0 BS EN 1852-1 - PLASTICS PIPING SYSTEMS FOR NON-PRESSURE UNDERGROUND DRAINAGE AND SEWERAGE - POLYPROPYLENE (PP) - PART 1: SPECIFICATIONS FOR PIPES, FITTINGS AND THE SYSTEM
PREN 1519-1 : DRAFT 2017 PLASTICS PIPING SYSTEMS FOR SOIL AND WASTE DISCHARGE (LOW AND HIGH TEMPERATURE) WITHIN THE BUILDING STRUCTURE - POLYETHYLENE (PE) - PART 1: REQUIREMENTS FOR PIPES, FITTINGS AND THE SYSTEM
DIN EN 15701 E : 2017 PLASTICS - THERMOPLASTIC JACKETS FOR INSULATION PRODUCTS FOR BUILDING EQUIPMENT AND INDUSTRIAL INSTALLATIONS - REQUIREMENTS AND TEST METHODS
NF ISO 11357-3 : 2011 PLASTICS - DIFFERENTIAL SCANNING CALORIMETRY (DSC) - PART 3: DETERMINATION OF TEMPERATURE AND ENTHALPY OF MELTING AND CRYSTALLIZATION
ISO 18263-2:2015 Plastics Mixtures of polypropylene (PP) and polyethylene (PE) recyclate derived from PP and PE used for flexible and rigid consumer packaging Part 2: Preparation of test specimens and determination of properties
DIN EN 15870 E : 2009 ADHESIVES - DETERMINATION OF TENSILE STRENGTH OF BUTT JOINTS
DIN EN ISO 11357-4 E : 2014 PLASTICS - DIFFERENTIAL SCANNING CALORIMETRY (DSC) - PART 4: DETERMINATION OF SPECIFIC HEAT CAPACITY (ISO 11357-4:2014)
I.S. EN ISO 12086-1:2006 PLASTICS - FLUOROPOLYMER DISPERSIONS AND MOULDING AND EXTRUSION MATERIALS - PART 1: DESIGNATION SYSTEM AND BASIS FOR SPECIFICATIONS
BS EN 17098-2:2018 Plastics. Barrier films for agricultural and horticultural soil disinfection by fumigation Method for film permeability determination using a static technique
BS ISO 17422:2002 Plastics. Environmental aspects. General guidelines for their inclusion in standards
12/30258334 DC : 0 BS EN 1013 - LIGHT TRANSMITTING SINGLE SKIN PROFILED PLASTIC SHEETS FOR INTERNAL AND EXTERNAL ROOFS, WALLS AND CEILINGS - REQUIREMENTS AND TEST METHODS
09/30209028 DC : 0 BS EN 131-2 - LADDERS - PART 2: REQUIREMENTS, TESTING, MARKING
CEN ISO/TS 80004-6:2015 NANOTECHNOLOGIES - VOCABULARY - PART 6: NANO-OBJECT CHARACTERIZATION (ISO/TS 80004-6:2013)
BS PD ISO/TS 80004-6 : 2013 NANOTECHNOLOGIES - VOCABULARY - PART 6: NANO-OBJECT CHARACTERIZATION
BS ISO 23559:2011 Plastics. Film and sheeting. Guidance on the testing of thermoplastic films
S.R. CEN ISO/TR 22007-5:2014 PLASTICS - DETERMINATION OF THERMAL CONDUCTIVITY AND THERMAL DIFFUSIVITY - PART 5: RESULTS OF INTERLABORATORY TESTING OF POLY(METHYL METHACRYLATE) SAMPLES (ISO/TR 22007-5:2011)
17/30371286 DC : 0 BS EN 4866 - AEROSPACE SERIES - DEFINITIONS OF IMPERFECTIONS AND DEFECTS IN ORGANIC MATRIX COMPOSITE MATERIALS
BS ISO 11357-4 : 2005 PLASTICS - DIFFERENTIAL SCANNING CALORIMETRY (DSC) - PART 4: DETERMINATION OF SPECIFIC HEAT CAPACITY
ISO 12013-2:2012 Paints and varnishes — Determination of curing characteristics using a free damped oscillation method — Part 2: Glass transition temperature
IEC 62899-201:2016 Printed electronics - Part 201: Materials - Substrates
ISO 30021:2013 Plastics — Burning behaviour — Intermediate-scale fire-resistance testing of fibre-reinforced polymer composites
14/30311109 DC : 0 BS EN 1453-1 - PLASTICS PIPING SYSTEMS WITH STRUCTURED-WALL PIPES FOR SOIL AND WASTE DISCHARGE (LOW AND HIGH TEMPERATURE) INSIDE BUILDINGS - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) - PART 1: SPECIFICATIONS FOR PIPES AND THE SYSTEM
NF ISO 15270 : 2009 PLASTICS - GUIDELINES FOR THE RECOVERY AND RECYCLING OF PLASTICS WASTE
BS EN ISO 22391-1:2009 Plastics piping systems for hot and cold water installations. Polyethylene of raised temperature resistance (PE-RT) General
ONORM EN ISO 15877-1 : 2011 PLASTICS PIPING SYSTEMS FOR HOT AND COLD WATER INSTALLATIONS - CHLORINATED POLY(VINYL CHLORIDE) (PVC-C) - PART 1: GENERAL
DIN EN ISO 3451-1:2008-11 PLASTICS - DETERMINATION OF ASH - PART 1: GENERAL METHODS
BS ISO 11667 : 1997 AMD 10676 FIBRE REINFORCED PLASTICS - MOULDING COMPOUNDS AND PREPREGS - DETERMINATION OF RESIN, REINFORCEMENT-FIBRE AND MINERAL-FILLER CONTENT - DISSOLUTION METHODS
08/30188330 DC : DRAFT AUG 2008 BS EN ISO 178 - PLASTICS - DETERMINATION OF FLEXURAL PROPERTIES
DIN EN ISO 11357-6:2013-04 PLASTICS - DIFFERENTIAL SCANNING CALORIMETRY (DSC) - PART 6: DETERMINATION OF OXIDATION INDUCTION TIME (ISOTHERMAL OIT) AND OXIDATION INDUCTION TEMPERATURE (DYNAMIC OIT) (ISO 11357-6:2008)
DIN EN 13245-2 E : 2010 PLASTICS - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) PROFILES FOR BUILDING APPLICATIONS - PART 2: PVC-U PROFILES AND PVC-UE PROFILES FOR INTERNAL AND EXTERNAL WALL AND CEILING FINISHES
BS ISO 20965:2005 Plastics. Determination of the transient extensional viscosity of polymer melts
UNE-EN ISO 16014-5:2013 Plastics - Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography - Part 5: Method using light-scattering detection (ISO 16014-5:2012)
04/30122909 DC : DRAFT SEP 2004 ISO 19212 - ADHESIVES - DETERMINATION OF TEMPERATURE DEPENDENCE OF SHEAR STRENGTH
I.S. EN ISO 8257-1:2006 PLASTICS - POLY(METHYL METHACRYLATE) (PMMA) MOULDING AND EXTRUSION MATERIALS - PART 1: DESIGNATION SYSTEM AND BASIS FOR SPECIFICATIONS
I.S. EN ISO 4007:2012 PERSONAL PROTECTIVE EQUIPMENT - EYE AND FACE PROTECTION - VOCABULARY (ISO 4007:2012)
BS ISO 13106:2014 Plastics. Blow-moulded polypropylene containers for packaging of liquid foodstuffs
PREN ISO 15874-1 : DRAFT 2010 PLASTICS PIPING SYSTEMS FOR HOT AND COLD WATER INSTALLATIONS - POLYPROPYLENE (PP) - PART 1: GENERAL
BS ISO 8605:2001 Textile-glass-reinforced plastics. Sheet moulding compound (SMC). Basis for specification
BS ISO 14127:2008 Carbon-fibre-reinforced composites. Determination of the resin, fibre and void contents
BS ISO 6707-3:2017 Buildings and civil engineering works. Vocabulary Sustainability terms
DIN EN 15422:2008-06 Precast concrete products - Specification of glassfibres for reinforcement of mortars and concretes
BS ISO 15166-1:1998 Adhesives. Methods of preparing bulk specimens Two-part systems
BS EN ISO 16664:2017 Gas analysis. Handling of calibration gases and gas mixtures. Guidelines
BS ISO 16664 : 2004 GAS ANALYSIS - HANDLING OF CALIBRATION GASES AND GAS MIXTURES - GUIDELINES
15/30315534 DC : 0 BS EN ISO 16396-2 - PLASTICS - POLYAMIDE (PA) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
DIN 55657:2016-08 Paints and varnishes - Test method for evaluation of elastic adhesives on coatings by peel test, peel strength test and tensile lap-shear strength test with additional stress by condensation test or cataplasm storage
ISO 13636:2012 Plastics — Film and sheeting — Non-oriented poly(ethylene terephthalate) (PET) sheets
09/30179627 DC : 0 BS ISO 4007 - PERSONAL PROTECTIVE EQUIPMENT - EYE AND FACE PROTECTION - VOCABULARY
DIN EN 15345:2008-02 Plastics - Recycled Plastics - Characterisation of Polypropylene (PP) recyclates
13/30258014 DC : 0 BS EN ISO 11358-1 - PLASTICS - THERMOGRAVIMETRY (TG) OF POLYMERS - PART 1: GENERAL PRINCIPLES (ISO/DIS 11358-1:2013)
BS EN 60455-1:1998 Resin based reactive compounds used for electrical insulation Definitions and general requirements
BS ISO 15750-3 : 2002 PACKAGING - STEEL DRUMS - PART 3: INSERTED FLANGE-TYPE CLOSURE SYSTEMS
BS ISO 11357-6 : 2008 PLASTICS - DIFFERENTIAL SCANNING CALORIMETRY (DSC) - PART 6: DETERMINATION OF OXIDATION INDUCTION TIME (ISOTHERMAL OIT) AND OXIDATION INDUCTION TEMPERATURE (DYNAMIC OIT)
S.R. CEN/TS 16861:2015 PLASTICS - RECYCLED PLASTICS - DETERMINATION OF SELECTED MARKER COMPOUNDS IN FOOD GRADE RECYCLED POLYETHYLENE TEREPHTHALATE (PET)
08/30161535 DC : 0 BS EN ISO 1874-1 - PLASTICS - POLYAMIDE (PA) MOULDING AND EXTRUSION MATERIALS - PART 1: DESIGNATION
12/30240423 DC : 0 BS ISO 16396-1 - PLASTICS - POLYAMIDE (PA) MOULDING AND EXTRUSION MATERIALS - PART 1: DESIGNATION SYSTEM, MARKING OF PRODUCTS AND BASIS FOR SPECIFICATIONS
12/30237820 DC : 0 BS EN ISO 306 - PLASTICS - THERMOPLASTIC MATERIALS - DETERMINATION OF VICAT SOFTENING TEMPERATURE (VST) (ISO/DIS 306:2012)
ONORM EN ISO 16014-5 : 2012 PLASTICS - DETERMINATION OF AVERAGE MOLECULAR MASS AND MOLECULAR MASS DISTRIBUTION OF POLYMERS USING SIZE-EXCLUSION CHROMATOGRAPHY - PART 5: METHOD USING LIGHT-SCATTERING DETECTION (ISO 16014-5:2012)
14/30284280 DC : 0 BS ISO 6721-10 - PLASTICS - DETERMINATION OF DYNAMIC MECHANICAL PROPERTIES - PART 10: COMPLEX SHEAR VISCOSITY USING A PARALLEL-PLATE OSCILLATORY RHEOMETER
BS ISO 12418-2:2012 Plastics. Post-consumer poly(ethylene terephthalate) (PET) bottle recyclates Preparation of test specimens and determination of properties
ISO 14127:2008 Carbon-fibre-reinforced composites Determination of the resin, fibre and void contents
UNE-EN ISO 877-1:2011 Plastics - Methods of exposure to solar radiation - Part 1: General guidance (ISO 877-1:2009)
BS ISO 1268-10:2005 Fibre-reinforced plastics. Methods of producing test plates Injection moulding of BMC and other long-fibre compounds. General principles and moulding of multipurpose test specimens
05/30136084 DC : DRAFT JUL 2005 ISO 12575-3 - THERMAL INSULATION - EXTERIOR INSULATING SYSTEMS FOR FOUNDATIONS - PART 3: TEST METHODS
DIN EN 13476-1:2015-11 (Draft) PLASTICS PIPING SYSTEMS FOR NON-PRESSURE UNDERGROUND DRAINAGE AND SEWERAGE - STRUCTURED-WALL PIPING SYSTEMS OF UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U), POLYPROPYLENE (PP) AND POLYETHYLENE (PE) - PART 1: GENERAL REQUIREMENTS AND PERFORMANCE CHARACTERISTICS
I.S. EN ISO 11357-2:2014 PLASTICS - DIFFERENTIAL SCANNING CALORIMETRY (DSC) - PART 2: DETERMINATION OF GLASS TRANSITION TEMPERATURE AND GLASS TRANSITION STEP HEIGHT (ISO 11357-2:2013)
01/121388 DC : DRAFT MARCH 2001 ISO 307 PLASTICS - POLYAMIDES - DETERMINATION OF VISCOSITY NUMBER
09/30192408 DC : 0 BS ISO 16014-1 - PLASTICS - DETERMINATION OF AVERAGE MOLECULAR MASS AND MOLECULAR MASS DISTRIBUTION OF POLYMERS USING SIZE-EXCLUSION CHROMATOGRAPHY - PART 1: GENERAL PRINCIPLES
05/30132152 DC : DRAFT APR 2005 ISO 21004 - PLASTICS PIPING SYSTEMS - MULTILAYER PIPES AND THEIR JOINTS, BASED ON THERMOPLASTICS, FOR WATER SUPPLY
BS ISO 15034:2000 Composites. Prepregs. Determination of resin flow
UNI EN 16240 : 2014 LIGHT TRANSMITTING FLAT SOLID POLYCARBONATE (PC) SHEETS FOR INTERNAL AND EXTERNAL USE IN ROOFS, WALLS AND CEILINGS - REQUIREMENTS AND TEST METHODS
ISO 16525-7:2014 Adhesives Test methods for isotropic electrically conductive adhesives Part 7: Environmental test methods
06/30136260 DC : DRAFT MAR 2006 ISO 21138-1 - PLASTICS PIPING SYSTEMS FOR NON-PRESSURE UNDERGROUND DRAINAGE AND SEWERAGE - STRUCTURED-WALL PIPING SYSTEMS OF UNPLASTICIZED POLY(VINYLCHLORIDE) (PVC-U), POLYPROPYLENE (PP) AND POLYETHYLENE (PE) - PART 1 - MATERIAL AND PERFORMANCE SPECIFICATIONS FOR PIPES, FITTINGS AND THE SYSTEMS
ONORM EN ISO 22391-1 : 2010 PLASTICS PIPING SYSTEMS FOR HOT AND COLD WATER INSTALLATIONS - POLYETHYLENE OF RAISED TEMPERATURE RESISTANCE (PE-RT) - PART 1: GENERAL
EN ISO 15494:2015 Plastics piping systems for industrial applications - Polybutene (PB), polyethylene (PE), polyethylene of raised temperature resistance (PE-RT), crosslinked polyethylene (PE-X), polypropylene (PP) - Metric series for specifications for components and the system (ISO 15494:2015)
EN 1555-1:2010 Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) - Part 1: General
ASTM D 1972 : 1997 Standard Practice for Generic Marking of Plastic Products
UNE-EN ISO 6721-1:2012 Plastics - Determination of dynamic mechanical properties - Part 1: General principles (ISO 6721-1:2011)
ONORM EN ISO 11357-3 : 2013 PLASTICS - DIFFERENTIAL SCANNING CALORIMETRY (DSC) - PART 3: DETERMINATION OF TEMPERATURE AND ENTHALPY OF MELTING AND CRYSTALLIZATION (ISO 11357-3:2011)
ISO 10210:2012 Plastics — Methods for the preparation of samples for biodegradation testing of plastic materials
UNI EN ISO 15877-1 : 2011 PLASTICS PIPING SYSTEMS FOR HOT AND COLD WATER INSTALLATIONS - CHLORINATED POLY(VINYL CHLORIDE) (PVC-C) - PART 1: GENERAL
ISO 22007-1:2017 Plastics — Determination of thermal conductivity and thermal diffusivity — Part 1: General principles
I.S. EN 15345:2007 PLASTICS - RECYCLED PLASTICS - CHARACTERISATION OF POLYPROPYLENE (PP) RECYCLATES
I.S. EN 16575:2014 BIO-BASED PRODUCTS - VOCABULARY
I.S. EN 17098-1:2018 PLASTICS - BARRIER FILMS FOR AGRICULTURAL AND HORTICULTURAL SOIL DISINFECTION BY FUMIGATION - PART 1: SPECIFICATIONS FOR BARRIER FILMS
I.S. EN 61479:2001 LIVE WORKING - FLEXIBLE CONDUCTOR COVERS (LINE HOSES) OF INSULATING MATERIAL
BS EN 16153 : 2013 LIGHT TRANSMITTING FLAT MULTIWALL POLYCARBONATE (PC) SHEETS FOR INTERNAL AND EXTERNAL USE IN ROOFS, WALLS AND CEILINGS - REQUIREMENTS AND TEST METHODS
S.R. CEN TS 15534-1:2007 WOOD-PLASTICS COMPOSITES (WPC) - PART 1: TEST METHODS FOR CHARACTERISATION OF WPC MATERIALS AND PRODUCTS
UNE-EN 16575:2015 Bio-based products - Vocabulary
I.S. CLC/TS 61112:2006 BLANKETS OF INSULATING MATERIAL FOR ELECTRICAL PURPOSES
ISO 6721-10:2015 Plastics Determination of dynamic mechanical properties Part 10: Complex shear viscosity using a parallel-plate oscillatory rheometer
ISO 18437-5:2011 Mechanical vibration and shock — Characterization of the dynamic mechanical properties of visco-elastic materials — Part 5: Poisson ratio based on comparison between measurements and finite element analysis
ISO 1382:2012 Rubber Vocabulary
BS ISO 16014-3:2012 Plastics. Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography Low-temperature method
ISO 16365-1:2014 Plastics — Thermoplastic polyurethanes for moulding and extrusion — Part 1: Designation system and basis for specifications
UNI EN ISO 6721-1 : 2011 PLASTICS - DETERMINATION OF DYNAMIC MECHANICAL PROPERTIES - PART 1: GENERAL PRINCIPLES
UNI CEN/TS 16011 : 2013 PLASTICS - RECYCLED PLASTICS - SAMPLE PREPARATION
ONORM EN ISO 3451-1 : 2008 PLASTICS - DETERMINATION OF ASH - PART 1: GENERAL METHODS
EN ISO 899-1:2017 Plastics - Determination of creep behaviour - Part 1: Tensile creep (ISO 899-1:2017)
UNI EN ISO 25762 : 2012 PLASTICS - GUIDANCE ON THE ASSESSMENT OF THE FIRE CHARACTERISTICS AND FIRE PERFORMANCE OF FIBRE-REINFORCED POLYMER COMPOSITES
ISO 604:2002 Plastics — Determination of compressive properties
ISO 18437-2:2005 Mechanical vibration and shock — Characterization of the dynamic mechanical properties of visco-elastic materials — Part 2: Resonance method
CEI EN 60893-1 : 2005 INSULATING MATERIALS - INDUSTRIAL RIGID LAMINATED SHEETS BASED ON THERMOSETTING RESINS FOR ELECTRICAL PURPOSES - PART 1: DEFINITIONS, DESIGNATIONS AND GENERAL REQUIREMENTS
ISO 15877-1:2009 Plastics piping systems for hot and cold water installations Chlorinated poly(vinyl chloride) (PVC-C) Part 1: General
EN ISO 10210:2017 Plastics - Methods for the preparation of samples for biodegradation testing of plastic materials (ISO 10210:2012)
BS EN 131-6:2015 Ladders Telescopic ladders
ASTM D 3089 : 1997 : R2008 Standard Practice for Determining the A-D Dimension of Aerosol Valve Dip Tubes
DIN EN ISO 20568-2:2015-07 (Draft) PLASTICS - FLUOROPOLYMER DISPERSIONS AND MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES (ISO 20568-2:2017)
CSA Z364.1.1-Z364.1.2 : 0 HAEMODIALYZERS, HAEMOFILTERS, AND HAEMOCONCENTRATORS/EXTRACORPOREAL BLOOD CIRCUIT FOR HAEMODIALYZERS, HAEMOFILTERS, AND HAEMOCONCENTRATORS
UNE-EN ISO 10927:2012 Plastics - Determination of the molecular mass and molecular mass distribution of polymer species by matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF-MS) (ISO 10927:2011)
I.S. EN ISO 15876-1:2017 PLASTICS PIPING SYSTEMS FOR HOT AND COLD WATER INSTALLATIONS - POLYBUTENE (PB) - PART 1: GENERAL (ISO 15876-1:2017)
I.S. EN ISO 899-1:2017 PLASTICS - DETERMINATION OF CREEP BEHAVIOUR - PART 1: TENSILE CREEP (ISO 899-1:2017)
UNI EN 1555-1 : 2011 PLASTICS PIPING SYSTEMS FOR THE SUPPLY OF GASEOUS FUELS - POLYETHYLENE (PE) - PART 1: GENERAL
EN ISO 899-2:2003/A1:2015 Plastics - Determination of creep behaviour - Part 2: Flexural creep by three-point loading - Amendment 1 (ISO 899-2:2003/Amd 1:2015)
EN ISO 8330:2014 Rubber and plastics hoses and hose assemblies - Vocabulary (ISO 8330:2014)
DIN EN 13121-1:2003-10 GRP tanks and vessels for use above ground - Part 1: Raw materials; Specification conditions and acceptance conditions
DIN EN ISO 11337:2011-04 Plastics - Polyamides - Determination of -caprolactam and -laurolactam by gas chromatography (ISO 11337:2010)
DIN EN ISO 12543-1:2011-12 Glass in building - Laminated glass and laminated safety glass - Part 1: Definitions and description of component parts (ISO 12543-1:2011)
EN 13121-1:2003 GRP TANKS AND VESSELS FOR USE ABOVE GROUND - PART 1: RAW MATERIALS - SPECIFICATION CONDITIONS AND ACCEPTANCE CONDITIONS
DIN EN 13421:2006-05 Plastics - Thermoset moulding compounds - Composites and reinforcement fibres - Preparation of specimens for determining the anisotropy of the properties of compression moulding composites
DIN EN 12201-1:2011-11 Plastics piping systems for water supply, and for drainage and sewerage under pressure - Polyethylene (PE) - Part 1: General
DIN EN 14598-1:2005-07 Reinforced thermosetting moulding compounds - Specification for Sheet Moulding Compound (SMC) and Bulk Moulding Compound (BMC) - Part 1: Designation
BS EN 14020-3:2002 Reinforcements. Specification for textile glass rovings Specific requirements
BS EN 1566-1:2000 Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure. Chlorinated poly(vinyl chloride) (PVC-C) Specification for pipes, fittings and the system
BS EN 15347:2007 Plastics. Recycled Plastics. Characterization of plastics waste
BS EN 14408-1:2004 Plastics piping systems for renovation of underground gas supply networks General
BS EN 12006-2 : 1998 NON-ACTIVE SURGICAL IMPLANTS - PARTICULAR REQUIREMENTS FOR CARDIAC AND VASCULAR IMPLANTS - PART 2: VASCULAR PROSTHESES INCLUDING CARDIAC VALVE CONDUITS
DIN EN 15342 E : 2008 PLASTICS - RECYCLED PLASTICS - CHARACTERIZATION OF POLYSTYRENE (PS) RECYCLATES
BS EN ISO 12114:1997 Fibre-reinforced plastics. Thermosetting moulding compounds and prepregs. Determination of cure characteristics
BS EN 13677-2:2003 Reinforced thermoplastic moulding compounds. Specification for GMT Methods of test and general requirements
UNE-EN 16245-2:2014 Fibre-reinforced plastic composites - Declaration of raw material characteristics - Part 2: Specific requirements for resin, curing systems, additives and modifiers
BS EN 13244-1:2002 Plastics piping systems for buried and above-ground pressure systems for water for general purposes, drainage and sewerage. Polyethylene (PE) General
BS EN ISO 14528-3:2000 Plastics. Melamine-formaldehyde powder moulding compounds (MF-PMCs) Requirements for selected moulding compounds
BS EN 14118-1:2003 Reinforcement. Specifications for textile glass mats (chopped strand and continuous filament mats) Designation
IEC 62011-1:2002 Insulating materials - Industrial, rigid, moulded, laminated tubes and rods of rectangular and hexagonal cross-section based on thermosetting resins for electrical purposes - Part 1: Definitions, designations and general requirements
UNE-EN ISO 11339:2010 Adhesives - T-peel test for flexible-to-flexible bonded assemblies (ISO 11339:2010)
BS EN ISO 12086-1:2006 Plastics. Fluoropolymer dispersions and moulding and extrusion materials Designation system and basis for specifications
BS EN ISO 15252-1:2000 Plastics. Epoxy powder moulding compounds (EP-PMCs) Designation system and basis for specifications
BS EN 1555-1:2010 Plastics piping systems for the supply of gaseous fuels. Polyethylene (PE) General
UNE-EN ISO 15876-1:2017 Plastics piping systems for hot and cold water installations - Polybutene (PB) - Part 1: General (ISO 15876-1:2017)
ISO 8062-1:2007 Geometrical product specifications (GPS) Dimensional and geometrical tolerances for moulded parts Part 1: Vocabulary
BS EN ISO 14526-1:2000 Plastics. Phenolic powder moulding compounds (PF-PMCs) Designation system and basis for specifications
BS EN ISO 1172:1999 Textile-glass-reinforced plastics. Prepregs, moulding compounds and laminates. Determination of the textile-glass and mineral-filler content. Calcination methods
BS EN 13473-2:2001 Reinforcement. Specifications for multi-axial multi-ply fabrics Methods of test and general requirements
BS EN 14118-3:2003 Reinforcement. Specifications for textile glass mats (chopped strand and continuous filament mats) Specific requirements
ISO 2559:2011 Textile glass Mats (made from chopped or continuous strands) Designation and basis for specifications
ISO 1886:1990 Reinforcement fibres Sampling plans applicable to received batches
DIN EN ISO 3672-1:2002-07 PLASTICS - UNSATURATED-POLYESTER RESINS (UP-R) - PART 1: DESIGNATION SYSTEM
ONORM EN ISO 13000-2 : 2006 PLASTICS - POLYTETRAFLUOROETHYLENE (PTFE) SEMI-FINISHED PRODUCTS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
CEN/TR 15353:2007 Plastics - Recycled plastics - Guidelines for the development of standards for recycled plastics
EN 12201-1:2011 Plastics piping systems for water supply, and for drainage and sewerage under pressure - Polyethylene (PE) - Part 1: General
DIN EN ISO 8257-1:2006-06 PLASTICS - POLY(METHYL METHACRYLATE) (PMMA) MOULDING AND EXTRUSION MATERIALS - PART 1: DESIGNATION SYSTEM AND BASIS FOR SPECIFICATIONS
EN 61112:2009 Live working - Electrical insulating blankets
EN 61479:2001/A1:2002 LIVE WORKING - FLEXIBLE CONDUCTOR COVERS (LINE HOSES) OF INSULATING MATERIAL
EN 13417-2:2001 Reinforcement - Specifications for woven fabrics - Part 2: Methods of test and general requirements
EN 12481 : 2000 SELF ADHESIVE TAPES - TERMINOLOGY
EN 12971-2:1999 Reinforcements - Specification for textile glass chopped strands - Part 2: Test methods and general requirements
DIN EN 1452-1:1999-09 PLASTICS PIPING SYSTEMS FOR WATER SUPPLY - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) - PART 1: GENERAL
UNI EN ISO 12543-1 : 2011 GLASS IN BUILDING - LAMINATED GLASS AND LAMINATED SAFETY GLASS - PART 1: DEFINITIONS AND DESCRIPTION OF COMPONENT PARTS
DIN EN ISO 12086-1:2006-05 PLASTICS - FLUOROPOLYMER DISPERSIONS AND MOULDING AND EXTRUSION MATERIALS - PART 1: DESIGNATION SYSTEM AND BASIS FOR SPECIFICATIONS
EN 12654-1:1998 Textile glass - Yarns - Part 1: Designation
DIN EN 13244-1:2003-04 PLASTICS PIPING SYSTEMS FOR BURIED AND ABOVE-GROUND PRESSURE SYSTEMS FOR WATER FOR GENERAL PURPOSES, DRAINAGE AND SEWERAGE - POLYETHYLENE (PE) - PART 1: GENERAL
EN 61111 : 2009 LIVE WORKING - ELECTRICAL INSULATING MATTING
DIN EN 15701:2017-02 PLASTICS - THERMOPLASTIC JACKETS FOR INSULATION PRODUCTS FOR BUILDING EQUIPMENT AND INDUSTRIAL INSTALLATIONS - REQUIREMENTS AND TEST METHODS
DIN EN ISO 20568-1:2017-10 PLASTICS - FLUOROPOLYMER DISPERSIONS AND MOULDING AND EXTRUSION MATERIALS - PART 1: DESIGNATION SYSTEM AND BASIS FOR SPECIFICATIONS (ISO 20568-1:2017)
EN 13244-1:2002 Plastics piping systems for buried and above-ground pressure systems for water for general purposes, drainage and sewerage - Polyethylene (PE) - Part 1: General
CEN/TS 15534-1:2007 Wood-plastics composites (WPC) - Part 1: Test methods for characterisation of WPC materials and products
EN 12575:1998 PLASTICS - THERMOSET MOULDING COMPOUNDS - DETERMINATION OF THE DEGREE OF FIBRE WET OUT IN SMC
DIN EN ISO 9163:2005-07 Textile glass - Rovings - Manufacture of test specimens and determination of tensile strength of impregnated rovings (ISO 9163:2005); German version EN ISO 9163:2005
CEN/TS 16861:2015 Plastics - Recycled plastics - Determination of selected marker compounds in food grade recycled polyethylene terephthalate (PET)
EN 12654-3:1998 Textile glass - Yarns - Part 3: General requirements for general applications
DIN EN ISO 15605:2004-11 Adhesives - Sampling (ISO 15605:2000)
EN ISO 12543-1:2011 Glass in building - Laminated glass and laminated safety glass - Part 1: Definitions and description of component parts (ISO 12543-1:2011)
EN 13245-2:2008/AC:2009 PLASTICS - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) PROFILES FOR BUILDING APPLICATIONS - PART 2: PVC-U PROFILES AND PVC-UE PROFILES FOR INTERNAL AND EXTERNAL WALL AND CEILING FINISHES
DIN EN 14447:2005-07 Fibre reinforced plastics - Glass mat reinforced thermoplastics (GMT) - Determination of flowability and solidification; German version of EN 14447:2005
EN 12576:1998 Plastics - Fibre reinforced composites - Preparation of compression moulded test plates of SMC, BMC and DMC
DIN EN 14649:2005-07 PRECAST CONCRETE PRODUCTS - TEST METHOD FOR STRENGTH RETENTION OF GLASS FIBRES IN CEMENT AND CONCRETE (SIC TEST)
EN 60464-1:1999/A1:2006 VARNISHES USED FOR ELECTRICAL INSULATION - PART 1: DEFINITIONS AND GENERAL REQUIREMENTS
EN 12666-1:2005+A1:2011 Plastics piping systems for non-pressure underground drainage and sewerage - Polyethylene (PE) - Part 1: Specifications for pipes, fittings and the system
EN 1013:2012+A1:2014 LIGHT TRANSMITTING SINGLE SKIN PROFILED PLASTICS SHEETS FOR INTERNAL AND EXTERNAL ROOFS, WALLS AND CEILINGS - REQUIREMENTS AND TEST METHODS
EN 61212-3-2:2013 Insulating materials - Industrial rigid round laminated tubes and rods based on thermosetting resins for electrical purposes - Part 3: Specifications for individual materials - Sheet 2: Round laminated moulded tubes
DIN EN ISO 306:2014-03 Plastics - Thermoplastic materials - Determination of Vicat softening temperature (VST) (ISO 306:2013)
DIN EN ISO 6401:2008-12 Plastics - Poly(vinyl chloride) - Determination of residual vinyl chloride monomer - Gas-chromatographic method (ISO 6401:2008)
DIN EN ISO 1043-3:2017-03 PLASTICS - SYMBOLS AND ABBREVIATED TERMS - PART 3: PLASTICIZERS (ISO 1043-3:2016)
DIN EN ISO 178:2013-09 PLASTICS - DETERMINATION OF FLEXURAL PROPERTIES (ISO 178:2010 + AMD.1:2013)
EN 13473-1:2001 Reinforcement - Specifications for multi-axial multi-ply fabrics - Part 1: Designation
EN 12971-1:1999 Reinforcements - Specification for textile glass chopped strands - Part 1: Designation
EN ISO 10365:1995 Adhesives - Designation of main failure patterns (ISO 10365:1992)
EN 13417-3:2001 Reinforcement - Specifications for woven fabrics - Part 3: Specific requirements
EN 13245-3:2010 Plastics - Unplasticized poly(vinyl chloride) (PVC-U) profiles for building applications - Part 3: Designation of PVC-UE profiles
ONORM EN 1329-1 : 2014 PLASTICS PIPING SYSTEMS FOR SOIL AND WASTE DISCHARGE (LOW AND HIGH TEMPERATURE) WITHIN THE BUILDING STRUCTURE - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) - PART 1: SPECIFICATIONS FOR PIPES, FITTINGS AND THE SYSTEM
DIN EN ISO 20568-2:2017-10 PLASTICS - FLUOROPOLYMER DISPERSIONS AND MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES (ISO 20568-2:2017)
EN 13473-3:2001 Reinforcement - Specifications for multi-axial multi-ply fabrics - Part 3: Specific requirements
EN 61212-3-3:2006 INSULATING MATERIALS - INDUSTRIAL RIGID ROUND LAMINATED TUBES AND RODS BASED ON THERMOSETTING RESINS FOR ELECTRICAL PURPOSES - PART 3: SPECIFICATIONS FOR INDIVIDUAL MATERIALS - SHEET 3: ROUND LAMINATED MOULDED RODS
ONORM EN 1555-1 : 2015 PLASTICS PIPING SYSTEMS FOR THE SUPPLY OF GASEOUS FUELS - POLYETHYLENE (PE) - PART 1: GENERAL
ONORM EN 1401-1 : 2009 PLASTICS PIPING SYSTEMS FOR NON-PRESSURE UNDERGROUND DRAINAGE AND SEWERAGE - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) - PART 1: SPECIFICATIONS FOR PIPES, FITTINGS AND THE SYSTEM
NF EN ISO 11337 : 2011 PLASTICS - POLYAMIDES - DETERMINATION OF EPSILONN-CAPROLACTAM AND OMEGA-LAUROLACTAM BY GAS CHROMATOGRAPHY
ONORM EN 12201-1 : 2015 PLASTICS PIPING SYSTEMS FOR WATER SUPPLY, AND FOR DRAINAGE AND SEWERAGE UNDER PRESSURE - POLYETHYLENE (PE) - PART 1: GENERAL
ONORM EN ISO 11337 : 2011 PLASTICS - POLYAMIDES - DETERMINATION OF E-CAPROLACTAM AND W-LAUROLACTAM BY GAS CHROMATOGRAPHY
I.S. EN ISO 1172:1999 TEXTILE-GLASS-REINFORCED PLASTICS - PREPREGS, MOULDING COMPOUNDS AND LAMINATES - DETERMINATION OF THE TEXTILE-GLASS AND MINERAL-FILLER CONTENT - CALCINATION METHODS
ONORM EN ISO 306 : 2014 PLASTICS - THERMOPLASTICS MATERIALS - DETERMINATION OF VICAT SOFTENING TEMPERATURE (VST) (ISO 306:2013)
ONORM EN ISO 6401 : 2008 PLASTICS - POLY(VINYL CHLORIDE) - DETERMINATION OF RESIDUAL VINYL CHLORIDE MONOMER - GAS-CHROMATOGRAPHIC METHOD
18/30371677 DC : DRAFT MAY 2018 BS EN 1401-1 - PLASTICS PIPING SYSTEMS FOR NON-PRESSURE UNDERGROUND DRAINAGE AND SEWERAGE - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) - PART 1: SPECIFICATIONS FOR PIPES, FITTINGS AND THE SYSTEMS
UNE-EN ISO 20568-1:2017 Plastics - Fluoropolymer dispersions and moulding and extrusion materials - Part 1: Designation system and basis for specifications (ISO 20568-1:2017)
ISO 21930:2017 Sustainability in buildings and civil engineering works — Core rules for environmental product declarations of construction products and services
DIN EN ISO 11357-6 E : 2013 PLASTICS - DIFFERENTIAL SCANNING CALORIMETRY (DSC) - PART 6: DETERMINATION OF OXIDATION INDUCTION TIME (ISOTHERMAL OIT) AND OXIDATION INDUCTION TEMPERATURE (DYNAMIC OIT) (ISO 11357-6:2008)
UNE-EN ISO 15494:2016 Plastics piping systems for industrial applications - Polybutene (PB), polyethylene (PE), polyethylene of raised temperature resistance (PE-RT), crosslinked polyethylene (PE-X), polypropylene (PP) - Metric series for specifications for components and the system (ISO 15494:2015)
CEI EN 60454-1 : 1997 SPECIFICATIONS FOR PRESSURE-SENSITIVE ADHESIVE TAPES FOR ELECTRICAL PURPOSES - PART 1: GENERAL REQUIREMENTS
12/30254691 DC : DRAFT MAR 2012 BS ISO 16525-7 - ADHESIVES - TEST METHODS FOR ISOTROPICALLY ELECTRICALLY CONDUCTING ADHESIVES - PART 7: ENVIRONMENTAL TEST METHODS
13/30276234 DC : 0 BS EN 15346 - PLASTICS - RECYCLED PLASTICS - CHARACTERISATION OF POLY(VINYL CHLORIDE) (PVC) RECYCLATES
06/30134637 DC : DRAFT FEB 2006 ISO 22007-3 - PLASTICS - DETERMINATION OF THERMAL CONDUCTIVITY AND DIFFUSIVITY - PART 3: TEMPERATURE WAVE ANALYSIS METHOD
DIN EN ISO 8257-1 E : 2006 PLASTICS - POLY(METHYL METHACRYLATE) (PMMA) MOULDING AND EXTRUSION MATERIALS - PART 1: DESIGNATION SYSTEM AND BASIS FOR SPECIFICATIONS
08/30175867 DC : DRAFT JAN 2008 BS EN 61111 - LIVE WORKING - ELECTRICAL INSULATING MATTING
DIN EN ISO 10927:2011-07 PLASTICS - DETERMINATION OF THE MOLECULAR MASS AND MOLECULAR MASS DISTRIBUTION OF POLYMER SPECIES BY MATRIX-ASSISTED LASER DESORPTION/IONIZATION TIME-OF-FLIGHT MASS SPECTROMETRY (MALDI-TOF-MS)
11/30242926 DC : DRAFT MAY 2011 BS ISO 12000 - PLASTICS/RUBBER - POLYMER DISPERSIONS AND RUBBER LATICES (NATURAL AND SYNTHETIC) - DEFINITIONS AND REVIEW OF TEST METHODS
I.S. EN ISO 12086-2:2006 PLASTICS - FLUOROPOLYMER DISPERSIONS AND MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
SAE AMS 2980/1 : 2014 CARBON FIBER FABRIC AND EPOXY RESIN WET LAY-UP REPAIR MATERIAL - PART 1 - GENERAL REQUIREMENTS
DIN EN ISO 11357-7:2015-12 Plastics - Differential scanning calorimetry (DSC) - Part 7: Determination of crystallization kinetics (ISO 11357-7:2015); German version EN ISO 11357-7:2015
11/30246452 DC : 0 BS EN 14758-1 - PLASTICS PIPING SYSTEMS FOR NON-PRESSURE UNDERGROUND DRAINAGE AND SEWERAGE - POLYPROPYLENE WITH MINERAL MODIFIERS (PP-MD) - PART 1: SPECIFICATIONS FOR PIPES, FITTINGS AND THE SYSTEM
ISO 22621-1:2007 Plastics piping systems for the supply of gaseous fuels for maximum operating pressures up to and including 2 MPa (20 bar) Polyamide (PA) Part 1: General
UNI EN 15343 : 2008 PLASTICS - RECYCLED PLASTICS - PLASTICS RECYCLING TRACEABILITY AND ASSESSMENT OF CONFORMITY AND RECYCLED CONTENT
02/121892 DC : DRAFT APR 2002 PREN 14447 - FIBRE REINFORCED PLASTICS - GLASS MAT REINFORCED THERMOPLASTICS (GMT) - DETERMINATION OF FLOWABILITY AND SOLIDIFICATION
00/565107 DC : DRAFT NOV 2000 BS EN 14052 - SPECIFICATION FOR HIGH PERFORMANCE INDUSTRIAL SAFETY HELMETS
07/30171973 DC : 0 BS EN ISO 6721-12 - PLASTICS - DETERMINATION OF DYNAMIC MECHANICAL PROPERTIES - PART 12: COMPRESSIVE VIBRATION - NON-RESONANCE METHOD
DIN EN 60454-1 : 1997 SPECIFICATIONS FOR PRESSURE-SENSITIVE ADHESIVE TAPES FOR ELECTRICAL PURPOSES - PART 1: GENERAL REQUIREMENTS
BS ISO 11359-2:1999 Plastics. Thermomechanical analysis (TMA) Determination of coefficient of linear thermal expansion and glass transition temperature
04/30091878 DC : DRAFT FEB 2004 BS EN ISO 13000-2 - PLASTICS - POLYTETRAFLUOROETHYLENE (PTFE) SEMI-FINISHED PRODUCTS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
PD ISO/TR 13014:2012 Nanotechnologies. Guidance on physico-chemical characterization of engineered nanoscale materials for toxicologic assessment
12/30266170 DC : 0 BS EN 15534-1 - COMPOSITES MADE FROM CELLULOSE-BASED MATERIALS AND THERMOPLASTICS (USUALLY CALLED WOOD-POLYMER COMPOSITES (WPC) OR NATURAL FIBRE COMPOSITES (NFC)) - PART 1 : TEST METHODS FOR CHARACTERISATION OF COMPOUNDS AND PRODUCTS
PREN 17098-2 : DRAFT 2017 PLASTICS - BARRIER FILMS FOR AGRICULTURAL AND HORTICULTURAL SOIL DISINFECTION BY FUMIGATION - PART 2: METHOD FOR FILM PERMEABILITY DETERMINATION USING A STATIC TECHNIQUE
11/30239977 DC : 0 BS EN 16245-2 - FIBRE-REINFORCED PLASTIC COMPOSITES - DECLARATION OF RAW MATERIAL CHARACTERISTICS - PART 2: ADDITIONAL REQUIREMENTS FOR RESINS, CURING SYSTEMS, ADDITIVES AND MODIFIERS
07/30175034 DC : DRAFT DEC 2007 BS ISO 18352 - CARBON-FIBRE-REINFORCED PLASTICS - DETERMINATION OF COMPRESSION-AFTER-IMPACT PROPERTIES AT A SPECIFIED IMPACT ENERGY LEVEL
BS ISO 4901:2011 Reinforced plastics based on unsaturated-polyester resins. Determination of the residual styrene monomer content, as well as the content of other volatile aromatic hydrocarbons, by gas chromatography
DIN EN ISO 25762:2012-04 Plastics - Guidance on the assessment of the fire characteristics and fire performance of fibre-reinforced polymer composites (ISO 25762:2009)
11/30240161 DC : 0 BS ISO 18606 - PACKAGING AND THE ENVIRONMENT - ORGANIC RECYCLING
I.S. EN 13244-1:2002 PLASTICS PIPING SYSTEMS FOR BURIED AND ABOVE-GROUND PRESSURE SYSTEMS FOR WATER FOR GENERAL PURPOSES DRAINAGE AND SEWERAGE - POLYETHYLENE (PE) - GENERAL
DIN EN ISO 877-1:2016-09 (Draft) PLASTICS - METHODS OF EXPOSURE TO SOLAR RADIATION - PART 1: GENERAL GUIDANCE
ONORM EN ISO 11357-4 : 2014 PLASTICS - DIFFERENTIAL SCANNING CALORIMETRY (DSC) - PART 4: DETERMINATION OF SPECIFIC HEAT CAPACITY (ISO 11357-4:2014)
DIN EN 16245-2:2013-08 Fibre-reinforced plastic composites - Declaration of raw material characteristics - Part 2: Specific requirements for resin, curing systems, additives and modifiers
BS ISO 3598:2011 Textile glass. Yarns. Basis for a specification
PD CEN/TS 16861:2015 Plastics. Recycled plastics. Determination of selected marker compounds in food grade recycled polyethylene terephthalate (PET)
12/30254697 DC : 0 BS ISO 16525-9 - ADHESIVES - TEST METHODS FOR ISOTROPICALLY ELECTRICALLY CONDUCTING ADHESIVES - PART 9: DETERMINATION OF HIGH-SPEED SIGNAL-TRANSMISSION CHARACTERISTICS
10/30216000 DC : 0 BS EN 61212-3-2 - INSULATING MATERIALS - INDUSTRIAL RIGID ROUND LAMINATED TUBES AND RODS BASED ON THERMOSETTING RESINS FOR ELECTRICAL PURPOSES - PART 3: SPECIFICATIONS FOR INDIVIDUAL MATERIALS - SHEET 2: ROUND LAMINATED MOULDED TUBES
17/30330561 DC : DRAFT MAY 2017 BS ISO 20819 - PLASTICS - WOOD-PLASTIC RECYCLED COMPOSITES (WPRC) - SPECIFICATION
BS ISO 2797:2017 Textile glass. Rovings. Basis for a specification
17/30361211 DC : 0 BS EN 513 - PLASTICS - POLY(VINYL CHLORIDE) (PVC) BASED PROFILES - DETERMINATION OF THE RESISTANCE TO ARTIFICIAL WEATHERING
12/30258011 DC : 0 BS ISO 11359-1 - PLASTICS - THERMOMECHANICAL ANALYSIS (TMA) - PART 1: GENERAL PRINCIPLES
BS ISO 2561:2012 Plastics. Determination of residual styrene monomer in polystyrene (PS) and impact-resistant polystyrene (PSI) by gas chromatography
14/30273496 DC : 0 BS ISO 21067 - PACKAGING - VOCABULARY
EN 15344:2007 Plastics - Recycled Plastics - Characterisation of Polyethylene (PE) recyclates
16/30321526 DC : 0 BS ISO 19935-1 - PLASTICS - TEMPERATURE MODULATED DSC - PART 1: GENERAL PRINCIPLES
BS ISO 19212:2006 Adhesives. Determination of temperature dependence of shear strength
BS EN ISO 4007:2012 Personal protective equipment. Eye and face protection. Vocabulary
BS ISO 20819:2018 Plastics. Wood-plastic recycled composites (WPRC). Specification
08/30175871 DC : DRAFT JAN 2008 BS EN 61112 - LIVE WORKING - ELECTRICAL INSULATING BLANKETS
DIN EN 15857:2010-05 Non-destructive testing - Acoustic emission - Testing of fibre-reinforced polymers - Specific methodology and general evaluation criteria
BS EN 15422:2008 Precast concrete products. Specification of glassfibres for reinforcement of mortars and concretes
16/30332879 DC : 0 BS EN 1451-1 - PLASTICS PIPING SYSTEMS FOR SOIL AND WASTE DISCHARGE (LOW AND HIGH TEMPERATURE) WITHIN THE BUILDING STRUCTURE - POLYPROPYLENE (PP) - PART 1: SPECIFICATIONS FOR PIPES, FITTINGS AND THE SYSTEM
98/123516 DC : DRAFT JULY 1998 PREN 13121-1 - GRP TANKS AND VESSELS FOR USE ABOVE GROUND - PART 1: RAW MATERIALS - ACCEPTANCE CONDITIONS AND USAGE CONDITIONS
ISO 12000:2014 Plastics/rubber — Polymer dispersions and rubber latices (natural and synthetic) — Definitions and review of test methods
DIN EN ISO 20568-2 E : 2017 PLASTICS - FLUOROPOLYMER DISPERSIONS AND MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES (ISO 20568-2:2017)
ASTM D 1972 : 1997 : R2001 Standard Practice for Generic Marking of Plastic Products
14/30275072 DC : 0 BS ISO 17902 - WRAPPED ELECTROFOAMING JOINTS FOR PE PIPING SYSTEMS WITH SMOOTH OUTER WALL FOR GRAVITY DRAINS AND SEWERS
PD CEN/TS 16010:2013 Plastics. Recycled plastics. Sampling procedures for testing plastics waste and recyclates
12/30254685 DC : DRAFT MAR 2012 BS ISO 16525-5 - ADHESIVES - TEST METHODS FOR ISOTROPICALLY ELECTRICALLY CONDUCTING ADHESIVES - PART 5: SHEAR FATIGUE TESTING
BS ISO 16525-5:2014 Adhesives. Test methods for isotropic electrically conductive adhesives Determination of shear fatigue
17/30355108 DC : 0 BS ISO 6237 - ADHESIVES - WOOD-TO-WOOD ADHESIVE BONDS - DETERMINATION OF SHEAR STRENGTH BY TENSILE LOADING
BS 7281:1990 Specification for polyethylene pipes for the supply of gaseous fuels
PREN 1329-1 : DRAFT 2013 PLASTICS PIPING SYSTEMS FOR SOIL AND WASTE DISCHARGE (LOW AND HIGH TEMPERATURE) WITHIN THE BUILDING STRUCTURE - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) - PART 1: SPECIFICATIONS FOR PIPES, FITTINGS AND THE SYSTEM
UNI EN ISO 877-1 : 2011 PLASTICS - METHODS OF EXPOSURE TO SOLAR RADIATION - PART 1: GENERAL GUIDANCE
PREN ISO 1874-1 : DRAFT 2008 PLASTICS - POLYAMIDE (PA) MOULDING AND EXTRUSION MATERIALS - PART 1: DESIGNATION
DIN ISO 16486-1:2015-07 Plastics piping systems for the supply of gaseous fuels - Unplasticized polyamide (PA-U) piping systems with fusion jointing and mechanical jointing - Part 1: General (ISO 16486-1:2012 + AMD 1:2014)
10/30192393 DC : 0 BS ISO 4901 - REINFORCED PLASTICS BASED ON UNSATURATED POLYESTER RESINS - DETERMINATION OF RESIDUAL STYRENE MONOMER CONTENT AS WELL AS THE CONTENT OF OTHER VOLATILE AROMATIC HYDROCARBONS, BY GAS CHROMATOGRAPHY
BS ISO 16525-9:2014 Adhesives. Test methods for isotropic electrically conductive adhesives Determination of high-speed signal-transmission characteristics
BS ISO 11357-3:1999 Plastics. Differential scanning calorimetry (DSC) Determination of temperature and enthalpy of melting and crystallization
BS EN 61479:2001 Live working. Flexible conductor covers (line hoses) of insulating material
17/30360679 DC : DRAFT SEP 2017 BS EN 17152-1 - PLASTICS PIPING SYSTEMS FOR NON-PRESSURE UNDERGROUND CONVEYANCE AND STORAGE OF NON-POTABLE WATER - BOXES USED FOR INFILTRATION, ATTENUATION AND STORAGE SYSTEMS - PART 1: SPECIFICATIONS FOR STORM WATER BOXES MADE OF PP AND PVC
09/30184235 DC : 0 BS ISO 10210 - PLASTICS - PREPARATION OF TEST AND REFERENCE MATERIALS FOR BIODEGRADATION TESTING
11/30196213 DC : 0 BS ISO 12817 - FIBRE-REINFORCED PLASTIC COMPOSITES - DETERMINATION OF OPENHOLE COMPRESSION STRENGTH
07/30151497 DC : 0 ISO 26842 - ADHESIVES - GUIDELINES FOR THE SELECTION OF ADHESIVES FOR INDOOR WOOD PRODUCTS BY DURABILITY TESTING
10/30211421 DC : 0 BS ISO 3598 - TEXTILE GLASS - YARNS - BASIS FOR A SPECIFICATION
PD ISO/TR 13329:2012 Nanomaterials. Preparation of Material Safety Data Sheet (MSDS)
07/30161721 DC : 0 BS ISO 11357-6 - PLASTICS - DIFFERENTIAL SCANNING CALORIMETRY (DSC) - PART 6: DETERMINATION OF OXIDATION INDUCTION TIME (ISOTHERMAL OIT) AND OXIDATION INDUCTION TEMPERATURE (DYNAMIC OIT)
I.S. EN ISO 16396-2:2017 PLASTICS - POLYAMIDE (PA) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES (ISO 16396-2:2017)
13/30257555 DC : 0 BS EN ISO 22007-2 - PLASTICS - DETERMINATION OF THERMAL CONDUCTIVITY AND THERMAL DIFFUSIVITY - PART 2: TRANSIENT PLANE HEAT SOURCE (HOT DISC) METHOD (ISO/DIS 22007-2:2013)
07/30165577 DC : 0 BS EN 1852-1 - PLASTICS PIPING SYSTEMS FOR NON-PRESSURE UNDERGROUND DRAINAGE AND SEWERAGE - POLYPROPYLENE (PP) - PART 1: SPECIFICATIONS FOR PIPES, FITTINGS AND THE SYSTEM
DIN EN 13245-3 E : 2010 PLASTICS - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) PROFILES FOR BUILDING APPLICATIONS - PART 3: DESIGNATION OF PVC-UE PROFILES
BS ISO 16525-4:2014 Adhesives. Test methods for isotropic electrically conductive adhesives Determination of shear strength and electrical resistance using rigid-to-rigid bonded assemblies
UNI EN 15857 : 2010 NON-DESTRUCTIVE TESTING - ACOUSTIC EMISSION - TESTING OF FIBRE-REINFORCED POLYMERS - SPECIFIC METHODOLOGY AND GENERAL EVALUATION CRITERIA
DIN EN ISO 11357-2:2014-07 PLASTICS - DIFFERENTIAL SCANNING CALORIMETRY (DSC) - PART 2: DETERMINATION OF GLASS TRANSITION TEMPERATURE AND GLASS TRANSITION STEP HEIGHT (ISO 11357-2:2013)
BS 2782-3:Method 323G:1997 Methods of testing plastics. Mechanical properties Complex shear viscosity using a parallel-plate oscillatory rheometer
DD CEN/TS 15534-1:2007 Wood-plastics composites (WPC) Test methods for characterisation of WPC materials and products
ISO 4007:2012 Personal protective equipment Eye and face protection Vocabulary
IEC TR 62392:2006 Suitability of typical electrical insulating material (EIM) for polymer recycling
PREN ISO 22007-2 : DRAFT 2013 PLASTICS - DETERMINATION OF THERMAL CONDUCTIVITY AND THERMAL DIFFUSIVITY - PART 2: TRANSIENT PLANE HEAT SOURCE (HOT DISC) METHOD (ISO/DIS 22007-2:2013)
I.S. EN ISO 10210:2017 PLASTICS - METHODS FOR THE PREPARATION OF SAMPLES FOR BIODEGRADATION TESTING OF PLASTIC MATERIALS (ISO 10210:2012)
S.R. CEN ISO/TS 80004-6:2015 NANOTECHNOLOGIES - VOCABULARY - PART 6: NANO-OBJECT CHARACTERIZATION (ISO/TS 80004-6:2013)
03/302293 DC : DRAFT APR 2003 EN 14649 - PRECAST CONCRETE PRODUCTS - TEST METHOD FOR STRENGTH RETENTION OF GLASS FIBRES IN CEMENT AND CONCRETE (SIC TEST)
UNI EN 15345 : 2008 PLASTICS - RECYCLED PLASTICS - CHARACTERISATION OF POLYPROPYLENE (PP) RECYCLATES
DIN EN ISO 16664:2016-07 (Draft) GAS ANALYSIS - HANDLING OF CALIBRATION GASES AND GAS MIXTURES - GUIDELINES (ISO 16664:2017)
CEI EN 61111 : 2010 LIVE WORKING - ELECTRICAL INSULATING MATTING
ISO 3598:2011 Textile glass Yarns Basis for a specification
I.S. EN 61111:2009 LIVE WORKING - ELECTRICAL INSULATING MATTING
ISO 17212:2012 Structural adhesives — Guidelines for the surface preparation of metals and plastics prior to adhesive bonding
ISO 3451-1:2008 Plastics Determination of ash Part 1: General methods
ISO 16525-6:2014 Adhesives Test methods for isotropic electrically conductive adhesives Part 6: Determination of pendulum-type shear impact
I.S. EN ISO 178:2010 PLASTICS - DETERMINATION OF FLEXURAL PROPERTIES (ISO 178:2010)
I.S. EN 60903:2003 LIVE WORKING - GLOVES OF INSULATING MATERIAL
UNI EN 15870 : 2009 ADHESIVES - DETERMINATION OF TENSILE STRENGTH OF BUTT JOINTS
BS ISO 18437-3 : 2005 MECHANICAL VIBRATION AND SHOCK - CHARACTERIZATION OF THE DYNAMIC MECHANICAL PROPERTIES OF VISCO-ELASTIC MATERIALS - PART 3: CANTILEVER SHEAR BEAM METHOD
PREN 131-2 : DRAFT 2009 LADDERS - PART 2: REQUIREMENTS, TESTING, MARKING
I.S. EN ISO 22007-3:2012 PLASTICS - DETERMINATION OF THERMAL CONDUCTIVITY AND THERMAL DIFFUSIVITY - PART 3: TEMPERATURE WAVE ANALYSIS METHOD (ISO 22007-3:2008)
I.S. EN ISO 8062-1:2007 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL AND GEOMETRICAL TOLERANCES FOR MOULDED PARTS - PART 1: VOCABULARY
BIS IS 13360-2-2 : 2013 PLASTICS - METHODS OF TESTING - PART 2: SAMPLING AND PREPARATION OF TEST SPECIMENS - SECTION 2: COMPRESSION MOULDED TEST SPECIMENS OF THERMOPLASTIC MATERIALS
BS EN ISO 10927:2011 Plastics. Determination of the molecular mass and molecular mass distribution of polymer species by matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF-MS)
ISO 19929:2017 Plastics Determination of average molecular mass and mixture ratio of poly(ethylene glycol) and its derivatives by MALDI-TOF-MS
ISO 2557-1:1989 Plastics Amorphous thermoplastics Preparation of test specimens with a specified maximum reversion Part 1: Bars
DIN EN ISO 16396-2:2017-07 Plastics - Polyamide (PA) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 16396-2:2017)
I.S. EN ISO 10364:2018 STRUCTURAL ADHESIVES - DETERMINATION OF THE POT LIFE (WORKING LIFE) OF MULTI-COMPONENT ADHESIVES (ISO 10364:2015)
UNE-ISO 1268-11:2012 Fibre-reinforced plastics. Methods of producing test plates. Part 11: Injection moulding of BMC and other long-fibre moulding compounds. Small plates
PREN 1852-1 : DRAFT 2016 PLASTICS PIPING SYSTEMS FOR NON-PRESSURE UNDERGROUND DRAINAGE AND SEWERAGE - POLYPROPYLENE (PP) - PART 1: SPECIFICATIONS FOR PIPES, FITTINGS AND THE SYSTEM
ISO 9163:2005 Textile glass — Rovings — Manufacture of test specimens and determination of tensile strength of impregnated rovings
ISO 2797:2017 Textile glass — Rovings — Basis for a specification
ONORM EN ISO 15874-1 : 2013 PLASTICS PIPING SYSTEMS FOR HOT AND COLD WATER INSTALLATIONS - POLYPROPYLENE (PP) - PART 1: GENERAL (ISO 15874-1:2013)
ISO 4437-1:2014 Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) — Part 1: General
ISO 21340:2017 Test methods for fibrous activated carbon
PREN 513 : DRAFT 2017 PLASTICS - POLY(VINYL CHLORIDE) (PVC) BASED PROFILES - DETERMINATION OF THE RESISTANCE TO ARTIFICIAL WEATHERING
PREN ISO 306 : DRAFT 2012 PLASTICS - THERMOPLASTIC MATERIALS - DETERMINATION OF VICAT SOFTENING TEMPERATURE (VST)(ISO/DIS 306:2012)
BS EN ISO 16014-5:2012 Plastics. Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography Method using light-scattering detection
ONORM EN ISO 1043-1 : 2012 AMD 1 2016 PLASTICS - SYMBOLS AND ABBREVIATED TERMS - PART 1: BASIC POLYMERS AND THEIR SPECIAL CHARACTERISTICS (ISO 1043-1:2011)
NF EN ISO 10927 : 2011 PLASTICS - DETERMINATION OF THE MOLECULAR MASS AND MOLECULAR MASS DISTRIBUTION OF POLYMER SPECIES BY MATRIX-ASSISTED LASER DESORPTION/IONIZATION TIME-OF-FLIGHT MASS SPECTROMETRY (MALDI-TOF-MS)
S.R. CEN/TS 16010:2013 PLASTICS - RECYCLED PLASTICS - SAMPLING PROCEDURES FOR TESTING PLASTICS WASTE AND RECYCLATES
I.S. EN ISO 22007-1:2017 PLASTICS - DETERMINATION OF THERMAL CONDUCTIVITY AND THERMAL DIFFUSIVITY - PART 1: GENERAL PRINCIPLES (ISO 22007-1:2017)
I.S. EN 60455-1:1999 RESIN BASED REACTIVE COMPOUNDS USED FOR ELECTRICAL INSULATION - PART 1: DEFINITIONS AND GENERAL REQUIREMENTS
I.S. EN 17033:2018 PLASTICS - BIODEGRADABLE MULCH FILMS FOR USE IN AGRICULTURE AND HORTICULTURE - REQUIREMENTS AND TEST METHODS
18/30361790 DC : 0 BS EN 17228 - PLASTICS - BIO-BASED POLYMERS, PLASTICS, AND PLASTIC PRODUCTS - TERMINOLOGY, CHARACTERISTICS AND COMMUNICATION
UNI EN ISO 178 : 2013 PLASTICS - DETERMINATION OF FLEXURAL PROPERTIES
EN 1519-1:1999 Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Polyethylene (PE) - Part 1: Specifications for pipes, fittings and the system
EN ISO 10927:2011 Plastics - Determination of the molecular mass and molecular mass distribution of polymer species by matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF-MS) (ISO 10927:2011)
PREN 15348 : DRAFT 2013 PLASTICS - RECYCLED PLASTICS - CHARACTERISATION OF POLY(ETHYLENE TEREPHTHALATE) (PET) RECYCLATES
ISO 16365-2:2014 Plastics — Thermoplastic polyurethanes for moulding and extrusion — Part 2: Preparation of test specimens and determination of properties
BS ISO 15033:2007 Plastics. Determination of caprolactam and its cyclic and linear oligomers by HPLC
ISO 16525-5:2014 Adhesives Test methods for isotropic electrically conductive adhesives Part 5: Determination of shear fatigue
ISO 16525-2:2014 Adhesives Test methods for isotropic electrically conductive adhesives Part 2: Determination of electrical characteristics for use in electronic assemblies
ASTM D 5575 : 2007 : R2013 Standard Classification System for Copolymers of Vinylidene Fluoride (VDF) with Other Fluorinated Monomers
EN ISO 13000-1:2005 Plastics - Polytetrafluoroethylene (PTFE) semi-finished products - Part 1: Requirements and designation (ISO 13000-1:2005)
ASTM D 5575 : 2007 Standard Classification System for Copolymers of Vinylidene Fluoride (VDF) with Other Fluorinated Monomers
I.S. EN ISO 20568-2:2017 PLASTICS - FLUOROPOLYMER DISPERSIONS AND MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES (ISO 20568-2:2017)
ASTM D 8136 : 2017 Standard Test Method for Determining Plastic Film Thickness and Thickness Variability Using a Non-Contact Capacitance Thickness Gauge
EN 1566-1:1998 Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Chlorinated poly(vinyl chloride) (PVC-C) - Part 1: Specifications for pipes, fittings and the system
BS EN 1329-1 : 2014 PLASTICS PIPING SYSTEMS FOR SOIL AND WASTE DISCHARGE (LOW AND HIGH TEMPERATURE) WITHIN THE BUILDING STRUCTURE - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) - PART 1: SPECIFICATIONS FOR PIPES, FITTINGS AND THE SYSTEM
EN 1565-1:1998 Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Styrene copolymer blends (SAN+PVC) - Part 1: Specifications for pipes, fittings and the system
EN 1852-1:2018 Plastics piping systems for non-pressure underground drainage and sewerage - Polypropylene (PP) - Part 1: Specifications for pipes, fittings and the system
PREN 17228 : DRAFT 2018 PLASTICS - BIO-BASED POLYMERS, PLASTICS, AND PLASTIC PRODUCTS - TERMINOLOGY, CHARACTERISTICS AND COMMUNICATION
EN ISO 11357-3:2018 Plastics - Differential scanning calorimetry (DSC) - Part 3: Determination of temperature and enthalpy of melting and crystallization (ISO 11357-3:2018)
EN ISO 11357-6:2018 Plastics - Differential scanning calorimetry (DSC) - Part 6: Determination of oxidation induction time (isothermal OIT) and oxidation induction temperature (dynamic OIT) (ISO 11357-6:2018)
EN ISO 15874-1:2013 Plastics piping systems for hot and cold water installations - Polypropylene (PP) - Part 1: General (ISO 15874-1:2013)
ISO 4898:2010 Rigid cellular plastics Thermal insulation products for buildings Specifications
ISO 8606:1990 Plastics — Prepregs — Bulk moulding compound (BMC) and dough moulding compound (DMC) — Basis for a specification
IEC 60455-1:1998 Resin based reactive compounds used for electrical insulation - Part 1: Definitions and general requirements
ISO 1268-11:2005 Fibre-reinforced plastics — Methods of producing test plates — Part 11: Injection moulding of BMC and other long-fibre moulding compounds — Small plates
I.S. EN ISO 3451-1:2008 PLASTICS - DETERMINATION OF ASH - PART 1: GENERAL METHODS
I.S. EN 15422:2008 PRECAST CONCRETE PRODUCTS - SPECIFICATION OF GLASSFIBRES FOR REINFORCEMENT OF MORTARS AND CONCRETES
DIN EN ISO 1874-2:2013-03 PLASTICS - POLYAMIDE (PA) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES (ISO 1874-2:2012)
DIN EN ISO 3672-1 E : 2002 PLASTICS - UNSATURATED-POLYESTER RESINS (UP-R) - PART 1: DESIGNATION SYSTEM
DIN EN 12654-2:1998-12 Textile glass - Yarns - Part 2: Methods of test and general specifications; German version EN 12654-2:1998
DIN EN 14408-1:2004-12 PLASTICS PIPING SYSTEMS FOR RENOVATION OF UNDERGROUND GAS SUPPLY NETWORKS - PART 1: GENERAL
DIN EN 13417-3 E : 2002 REINFORCEMENT - SPECIFICATIONS FOR WOVEN FABRICS - PART 3: SPECIFIC REQUIREMENTS
DIN EN 14758-1:2012-05 Plastics piping systems for non-pressure underground drainage and sewerage - Polypropylene with mineral modifiers (PP-MD) - Part 1: Specifications for pipes, fittings and the system
DIN EN 15347:2008-02 Plastics - Recycled Plastics - Characterisation of plastics wastes
DIN EN ISO 295:2004-05 Plastics - Compression moulding of test specimens of thermosetting materials (ISO 295:2004)
DIN EN 15346 E : 2015 PLASTICS - RECYCLED PLASTICS - CHARACTERIZATION OF POLY(VINYL CHLORIDE) (PVC) RECYCLATES
DIN EN 15347 E : 2008 PLASTICS - RECYCLED PLASTICS - CHARACTERISATION OF PLASTICS WASTES
DIN EN ISO 14530-2:2000-08 Plastics - Unsaturated-polyester powder moulding compounds (UP-PMCs) - Part 2: Preparation of test specimens and determination of properties (ISO 14530-2:1999); German version EN ISO 14530-2:1999
DIN EN 15344:2008-02 Plastics - Recycled Plastics - Characterisation of Polyethylene (PE) recyclates
DIN EN ISO 899-2:2015-06 PLASTICS - DETERMINATION OF CREEP BEHAVIOUR - PART 2: FLEXURAL CREEP BY THREE-POINT LOADING (ISO 899-2:2003 + AMD.1:2015)
DIN EN ISO 15023-1:2016-03 (Draft) PLASTICS - POLY(VINYL ALCOHOL) (PVAL) MATERIALS - PART 1: DESIGNATION SYSTEM AND BASIS FOR SPECIFICATIONS (ISO 15023-1:2017)
DIN EN 15342:2008-02 Plastics - Recycled Plastics - Characterization of polystyrene (PS) recyclates
BS EN ISO 15605:2004 Adhesives. Sampling
BS EN ISO 10082:2000 Plastics. Phenolic resins. Classification and test methods
BS EN ISO 15023-1:2017 Plastics. Poly(vinyl alcohol) (PVAL) materials Designation system and basis for specifications
BS EN ISO 1874-2:2012 Plastics. Polyamide (PA) moulding and extrusion materials Preparation of test specimens and determination of properties
BS EN 13473-1:2001 Reinforcement. Specifications for multi-axial multi-ply fabrics Designation
BS EN 14118-2:2003 Reinforcement. Specifications for textile glass mats (chopped strand and continuous filament mats) Methods of test and general requirements
BS EN 13280:2001 Specification for glass fibre reinforced cisterns of one-piece and sectional construction, for the storage, above ground, of cold water
ISO 17885:2015 Plastics piping systems Mechanical fittings for pressure piping systems Specifications
BS EN ISO 14528-2:2000 Plastics. Melamine-formaldehyde powder moulding compounds (MF-PMCs) Preparation of test specimens and determination of properties
BS EN 13417-3:2001 Reinforcement. Specifications for woven fabrics Specific Requirements
IEC 61212-3-1:2013 Insulating materials - Industrial rigid round laminated tubes and rods based on thermosetting resins for electrical purposes - Part 3: Specifications for individual materials - Sheet 1: Round laminated rolled tubes
DIN EN 15343 E : 2008 PLASTICS - RECYCLED PLASTICS - PLASTICS RECYCLING TRACEABILITY AND ASSESSMENT OF CONFORMITY AND RECYCLED CONTENT
ISO 1172:1996 Textile-glass-reinforced plastics — Prepregs, moulding compounds and laminates — Determination of the textile-glass and mineral-filler content — Calcination methods
BS EN 13473-3:2001 Reinforcement. Specifications for multi-axial multi-ply fabrics Specific requirements
BS EN 1401-1:2009 Plastic piping systems for non-pressure underground drainage and sewerage. Unplasticized poly(vinyl chloride) (PVC-U) Specifications for pipes, fittings and the system
BS EN ISO 308:1998 Plastics. Phenolic moulding materials. Determination of acetone-soluble matter (apparent resin content of material in the unmoulded state)
BS EN ISO 604:2003 Plastics. Determination of compressive properties
UNE-EN ISO 12543-1:2011 Glass in building - Laminated glass and laminated safety glass - Part 1: Definitions and description of component parts (ISO 12543-1:2011)
ONORM EN 12666-1 : 2011 PLASTICS PIPING SYSTEMS FOR NON-PRESSURE UNDERGROUND DRAINAGE AND SEWERAGE - POLYETHYLENE (PE) - PART 1: SPECIFICATIONS FOR PIPES, FITTINGS AND THE SYSTEM
I.S. EN 15346:2014 PLASTICS - RECYCLED PLASTICS - CHARACTERISATION OF POLY(VINYL CHLORIDE) (PVC) RECYCLATES
I.S. EN ISO 11357-1:2016 PLASTICS - DIFFERENTIAL SCANNING CALORIMETRY (DSC) - PART 1: GENERAL PRINCIPLES (ISO 11357-1:2016)
I.S. EN ISO 13000-2:2006 PLASTICS - POLYTETRAFLUOROETHYLENE (PTFE) SEMI-FINISHED PRODUCTS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
I.S. EN 61212-3-1:2013 INSULATING MATERIALS - INDUSTRIAL RIGID ROUND LAMINATED TUBES AND RODS BASED ON THERMOSETTING RESINS FOR ELECTRICAL PURPOSES - PART 3: SPECIFICATIONS FOR INDIVIDUAL MATERIALS - SHEET 1: ROUND LAMINATED ROLLED TUBES (IEC 61212-3-1:2013 (EQV))
I.S. EN ISO 15023-1:2017 PLASTICS - POLY(VINYL ALCOHOL) (PVAL) MATERIALS - PART 1: DESIGNATION SYSTEM AND BASIS FOR SPECIFICATIONS (ISO 15023-1:2017)
I.S. EN 131-2:2010 LADDERS - PART 2: REQUIREMENTS, TESTING, MARKING
I.S. EN 14052:2012 HIGH PERFORMANCE INDUSTRIAL HELMETS
I.S. EN ISO 11339:2010 ADHESIVES - T-PEEL TEST FOR FLEXIBLE-TO-FLEXIBLE BONDED ASSEMBLIES
DIN EN 14409-1:2004-12 PLASTICS PIPING SYSTEMS FOR RENOVATION OF UNDERGROUND WATER SUPPLY NETWORKS - PART 1: GENERAL
I.S. EN 13245-1:2010 PLASTICS - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) PROFILES FOR BUILDING APPLICATIONS - PART 1: DESIGNATION OF PVC-U PROFILES
I.S. EN ISO 13000-1:2006 PLASTICS - POLYTETRAFLUOROETHYLENE (PTFE) SEMI-FINISHED PRODUCTS - PART 1: REQUIREMENTS AND DESIGNATION
I.S. EN ISO 6401:2008 PLASTICS - POLY(VINYL CHLORIDE) - DETERMINATION OF RESIDUAL VINYL CHLORIDE MONOMER - GAS-CHROMATOGRAPHIC METHOD
I.S. EN 61212-1:2006 INSULATING MATERIALS - INDUSTRIAL RIGID ROUND LAMINATED TUBES AND RODS BASED ON THERMOSETTING RESINS FOR ELECTRICAL PURPOSES - PART 1: DEFINITIONS, DESIGNATIONS AND GENERAL REQUIREMENTS
DIN EN ISO 11339:2010-06 Adhesives - T-peel test for flexible-to-flexible bonded assemblies (ISO 11339:2010)
DIN EN ISO 15874-1:2004-03 PLASTICS PIPING SYSTEMS FOR HOT AND COLD WATER INSTALLATIONS - POLYPROPYLENE (PP)
I.S. EN ISO 11337:2010 PLASTICS - POLYAMIDES - DETERMINATION OF EPSILON-CAPROLACTAM AND OMEGA-LAUROLACTAM BY GAS CHROMATOGRAPHY
CEN/TS 16010:2013 PLASTICS - RECYCLED PLASTICS - SAMPLING PROCEDURES FOR TESTING PLASTICS WASTE AND RECYCLATES
ONORM EN 14758-1 : 2012 PLASTICS PIPING SYSTEMS FOR NON-PRESSURE UNDERGROUND DRAINAGE AND SEWERAGE - POLYPROPYLENE WITH MINERAL MODIFIERS (PP-MD) - PART 1: SPECIFICATIONS FOR PIPES, FITTINGS AND THE SYSTEM
I.S. EN ISO 12543-1:2011 GLASS IN BUILDING - LAMINATED GLASS AND LAMINATED SAFETY GLASS - PART 1: DEFINITIONS AND DESCRIPTION OF COMPONENT PARTS
I.S. EN 397:2012 INDUSTRIAL SAFETY HELMETS
I.S. EN 61212-3-2:2013 INSULATING MATERIALS - INDUSTRIAL RIGID ROUND LAMINATED TUBES AND RODS BASED ON THERMOSETTING RESINS FOR ELECTRICAL PURPOSES - PART 3: SPECIFICATIONS FOR INDIVIDUAL MATERIALS - SHEET 2: ROUND LAMINATED MOULDED TUBES (IEC 61212-3-2:2013 (EQV))
I.S. EN ISO 8256:2004 PLASTICS - DETERMINATION OF TENSILE-IMPACT STRENGTH
I.S. EN 60893-1:2004 INSULATING MATERIALS - INDUSTRIAL RIGID LAMINATED SHEETS BASED ON THERMOSETTING RESINS FOR ELECTRICAL PURPOSES - PART 1: DEFINITIONS, DESIGNATIONS AND GENERAL REQUIREMENTS
I.S. EN 12201-1:2011 PLASTICS PIPING SYSTEMS FOR WATER SUPPLY, AND FOR DRAINAGE AND SEWERAGE UNDER PRESSURE - POLYETHYLENE (PE) - PART 1: GENERAL
I.S. EN 61212-3-3:2006 INSULATING MATERIALS - INDUSTRIAL RIGID ROUND LAMINATED TUBES AND RODS BASED ON THERMOSETTING RESINS FOR ELECTRICAL PURPOSES - PART 3: SPECIFICATIONS FOR INDIVIDUAL MATERIALS - SHEET 3: ROUND LAMINATED MOULDED RODS
I.S. EN 12200-1:2016 PLASTICS RAINWATER PIPING SYSTEMS FOR ABOVE GROUND EXTERNAL USE - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) - PART 1: SPECIFICATIONS FOR PIPES, FITTINGS AND THE SYSTEM
I.S. EN 1555-1:2010-2015 PLASTICS PIPING SYSTEMS FOR THE SUPPLY OF GASEOUS FUELS - POLYETHYLENE (PE) - PART 1: GENERAL
I.S. EN ISO 306:2013 PLASTICS - THERMOPLASTIC MATERIALS - DETERMINATION OF VICAT SOFTENING TEMPERATURE (VST) (ISO 306:2013)
I.S. EN 12654-1:1999 TEXTILE GLASS - YARNS - DESIGNATION
I.S. EN ISO 11469:2016 PLASTICS - GENERIC IDENTIFICATION AND MARKING OF PLASTICS PRODUCTS (ISO 11469:2016)
I.S. EN 14758-1:2012 PLASTICS PIPING SYSTEMS FOR NON-PRESSURE UNDERGROUND DRAINAGE AND SEWERAGE - POLYPROPYLENE WITH MINERAL MODIFIERS (PP-MD) - PART 1: SPECIFICATIONS FOR PIPES, FITTINGS AND THE SYSTEM
I.S. EN ISO 604:2003 PLASTICS - DETERMINATION OF COMPRESSIVE PROPERTIES
DIN EN ISO 877-1:2011-03 Plastics - Methods of exposure to solar radiation - Part 1: General guidance (ISO 877-1:2009)
DIN EN 1453-1:2017-09 PLASTICS PIPING SYSTEMS WITH STRUCTURED-WALL PIPES FOR SOIL AND WASTE DISCHARGE (LOW AND HIGH TEMPERATURE) INSIDE BUILDINGS - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) - PART 1: SPECIFICATIONS FOR PIPES AND THE SYSTEM
I.S. EN ISO 1874-2:2012 PLASTICS - POLYAMIDE (PA) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES (ISO 1874-2:2012)
I.S. EN 1453-1:2017 PLASTICS PIPING SYSTEMS WITH STRUCTURED-WALL PIPES FOR SOIL AND WASTE DISCHARGE (LOW AND HIGH TEMPERATURE) INSIDE BUILDINGS - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) - PART 1 - SPECIFICATIONS FOR PIPES AND THE SYSTEM
I.S. EN ISO 2078:1995 TEXTILE GLASS - YARNS - DESIGNATION (ISO 2078:1993)
I.S. EN ISO 899-2:2003 PLASTICS - DETERMINATION OF CREEP BEHAVIOUR - PART 2: FLEXURAL CREEP BY THREE-POINT LOADING (ISO 899-2:2003)
EN ISO 11357-4:2014 PLASTICS - DIFFERENTIAL SCANNING CALORIMETRY (DSC) - PART 4: DETERMINATION OF SPECIFIC HEAT CAPACITY (ISO 11357-4:2014)
I.S. EN 12666-1:2006 PLASTICS PIPING SYSTEMS FOR NON-PRESSURE UNDERGROUND DRAINAGE AND SEWERAGE - POLYETHYLENE (PE) - PART 1: SPECIFICATIONS FOR PIPES, FITTINGS AND THE SYSTEM
I.S. EN ISO 1043-3:2016 PLASTICS - SYMBOLS AND ABBREVIATED TERMS - PART 3: PLASTICIZERS
UNI CEN/TS 16010 : 2013 PLASTICS - RECYCLED PLASTICS - SAMPLING PROCEDURES FOR TESTING PLASTICS WASTE AND RECYCLATES
I.S. EN ISO 8330:2014 RUBBER AND PLASTICS HOSES AND HOSE ASSEMBLIES - VOCABULARY (ISO 8330:2014)
UNI EN ISO 15874-1 : 2013 PLASTICS PIPING SYSTEMS FOR HOT AND COLD WATER INSTALLATIONS - POLYPROPYLENE (PP) - PART 1: GENERAL
ONORM EN ISO 21003-1 : 2012 MULTILAYER PIPING SYSTEMS FOR HOT AND COLD WATER INSTALLATIONS INSIDE BUILDINGS - PART 1: GENERAL (ISO 21003-1:2008)
VDE 0360-1 : 2006 Varnishes used for electrical insulation Part 1: Definitions and general requirements (IEC 60464-1:1998 + A1:2006)
BS 3396-1:1991 Woven glass fibre fabrics for plastics reinforcement Specification for loom-state fabrics
VDE 0355-1 : 1999 RESIN BASED REACTIVE COMPOUNDS USED FOR ELECTRICAL INSULATION - DEFINITIONS AND GENERAL REQUIREMENTS
BS 5350-C12:1994 Methods of test for adhesives. Adhesively bonded joints: mechanical tests 180° peel test for flexible-to-flexible bonded assemblies (T-peel test)
VDE 0319-1 : 2007 COR 1 2014 INSULATING MATERIALS - INDUSTRIAL RIGID ROUND LAMINATED TUBES AND RODS BASED ON THERMOSETTING RESINS FOR ELECTRICAL PURPOSES - PART 1: DEFINITIONS, DESIGNATIONS AND GENERAL REQUIREMENTS
DIN EN 60455-1 : 1999 RESIN BASED REACTIVE COMPOUNDS USED FOR ELECTRICAL INSULATION - PART 1: DEFINITIONS AND GENERAL REQUIREMENTS
VDE 0340-1 : 1997 SPECIFICATION FOR PRESSURE SENSITIVE ADHESIVE TAPES FOR ELECTRICAL PURPOSES - PART 1: GENERAL REQUIREMENTS
NBR ISO 16486-1 : 2013 PLASTICS PIPING SYSTEMS FOR THE SUPPLY OF GASEOUS FUELS - UNPLASTICIZED POLYAMIDE (PA-U) PIPING SYSTEMS WITH FUSION JOINTING AND MECHANICAL JOINTING - PART 1: GENERAL
BS 2782-7.733A(1996) : 1996 AMD 9928 METHODS OF TESTING PLASTICS - RHEOLOGICAL PROPERTIES - DETERMINATION OF VISCOSITY NUMBER OF POLYAMIDES
VDE 0337-1 : 1998 SPECIFICATION FOR POLYESTER FIBRE WOVEN TAPES - DEFINITIONS, DESIGNATION AND GENERAL REQUIREMENTS
DIN EN 61068-1 : 1998 SPECIFICATION FOR POLYESTER FIBRE WOVEN TAPES - PART 1: DEFINITIONS, DESIGNATION AND GENERAL REQUIREMENTS
NBR 15708-5 : 2011 PETROLEUM AND NATURAL GAS INDUSTRIES - PULTRUDED SHAPES - PART 5: STRUCTURAL SHAPES
CEI EN 60903 : 2005 LIVE WORKING - GLOVES OF INSULATING MATERIAL IMPIANTI
ISO 6237:2017 Adhesives — Wood-to-wood adhesive bonds — Determination of shear strength by tensile loading
DIN EN ISO 22007-6:2015-05 PLASTICS - DETERMINATION OF THERMAL CONDUCTIVITY AND THERMAL DIFFUSIVITY - PART 6: COMPARATIVE METHOD FOR LOW THERMAL CONDUCTIVITIES USING A TEMPERATURE-MODULATION TECHNIQUE (ISO 22007-6:2014)
PREN 1401-1 : DRAFT 2018 PLASTICS PIPING SYSTEMS FOR NON-PRESSURE UNDERGROUND DRAINAGE AND SEWERAGE - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) - PART 1: SPECIFICATIONS FOR PIPES, FITTINGS AND THE SYSTEMS
UNI EN ISO 11357-3 : 2013 PLASTICS - DIFFERENTIAL SCANNING CALORIMETRY (DSC) - PART 3: DETERMINATION OF TEMPERATURE AND ENTHALPY OF MELTING AND CRYSTALLIZATION
03/306100 DC : DRAFT APR 2003 ISO 18437-3 - MECHANICAL VIBRATION AND SHOCK - CHARACTERIZATION OF THE DYNAMIC MECHANICAL PROPERTIES OF RESILIENT MATERIALS - PART 3: SINGLE CANTILEVER BEAM METHOD
10/30212144 DC : 0 BS EN 12201-1 - PLASTICS PIPING SYSTEMS FOR WATER SUPPLY, AND FOR DRAINAGE AND SEWERAGE UNDER PRESSURE - POLYETHYLENE (PE) - PART 1: GENERAL
17/30364341 DC : 0 BS EN 1519-1 - PLASTICS PIPING SYSTEMS FOR SOIL AND WASTE DISCHARGE (LOW AND HIGH TEMPERATURE) WITHIN THE BUILDING STRUCTURE - POLYETHYLENE (PE) - PART 1: REQUIREMENTS FOR PIPES, FITTINGS AND THE SYSTEM
CSA Z13329 : 2015 NANOMATERIALS - PREPARATION OF SAFETY DATA SHEETS (SDSS)
BS ISO 6721-10:2015 Plastics. Determination of dynamic mechanical properties Complex shear viscosity using a parallel-plate oscillatory rheometer
BS ISO 16620-1:2015 Plastics. Biobased content General principles
BS EN ISO 22007-6:2015 Plastics. Determination of thermal conductivity and thermal diffusivity Comparative method for low thermal conductivities using a temperature-modulation technique
18/30363850 DC : DRAFT APR 2018 BS EN ISO 3451-1 - PLASTICS - DETERMINATION OF ASH - PART 1: GENERAL METHODS
15/30327642 DC : 0 BS EN 13476-1 - PLASTICS PIPING SYSTEMS FOR NON-PRESSURE UNDERGROUND DRAINAGE AND SEWERAGE - STRUCTURED-WALL PIPING SYSTEMS OF UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U), POLYPROPYLENE (PP) AND POLYETHYLENE (PE) - PART 1: GENERAL REQUIREMENTS AND PERFORMANCE CHARACTERISTICS
ASTM D 1972 : 1997 : R2005 Standard Practice for Generic Marking of Plastic Products (Withdrawn 2014)
PD CEN/TR 15438:2007 Plastics piping systems. Guidance for coding of products and their intended uses
BS ISO 24538:2008 Plastics. Homopolymer and copolymer resins of vinyl chloride. Determination of residual vinyl chloride monomer by gas-chromatographic analysis of dry powder
BS EN ISO 178 : 2010 PLASTICS - DETERMINATION OF FLEXURAL PROPERTIES
DIN EN ISO 16396-1:2015-05 Plastics - Polyamide (PA) moulding and extrusion materials - Part 1: Designation system, marking of products and basis for specifications (ISO 16396-1:2015)
DIN EN ISO 11358-1 E : 2014 PLASTICS - THERMOGRAVIMETRY (TG) OF POLYMERS - PART 1: GENERAL PRINCIPLES (ISO 11358-1:2014)
PD CEN/TS 16011:2013 Plastics. Recycled plastics. Sample preparation
12/30255878 DC : 0 BS ISO 17885 - PLASTICS PIPING SYSTEMS - MECHANICAL FITTINGS FOR PRESSURE PIPING SYSTEMS - SPECIFICATIONS
BS ISO 21067-1:2016 Packaging. Vocabulary General terms
05/30130524 DC : DRAFT MAR 2005 ISO 22621-1 - PLASTICS PIPING SYSTEMS FOR THE SUPPLY OF GASEOUS FUELS FOR MAXIMUM OPERATING UP TO AND INCLUDING 2 MPA (20 BAR) - POLYAMIDE (PA) - PART 1: GENERAL
BS ISO 16525-1:2014 Adhesives. Test methods for isotropic electrically conductive adhesives General test methods
08/30177314 DC : DRAFT JAN 2008 BS ISO 11357-3 - PLASTICS - DIFFERENTIAL SCANNING CALORIMETRY (DSC) - PART 3: DETERMINATION OF TEMPERATURE AND ENTHALPY OF MELTING AND CRYSTALLIZATION
07/30147100 DC : 0 ISO 18437-4 - MECHANICAL VIBRATION AND SHOCK - CHARACTERIZATION OF THE DYNAMIC MECHANICAL PROPERTIES OF VISCO-ELASTIC MATERIALS - PART 4: DYNAMIC STIFFNESS METHOD
BS EN ISO 1133-2:2011 Plastics. Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics Method for materials sensitive to time-temperature history and/or moisture
17/30357747 DC : DRAFT AUG 2017 BS EN ISO 4007 - PERSONAL PROTECTIVE EQUIPMENT - EYE AND FACE PROTECTION - VOCABULARY
BS EN ISO 22007-2:2015 Plastics. Determination of thermal conductivity and thermal diffusivity Transient plane heat source (hot disc) method
ISO 12817:2013 Fibre-reinforced plastic composites — Determination of open-hole compression strength
BS ISO 7198:1998 Cardiovascular implants. Tubular vascular prostheses
CEI EN 61112 : 2010 LIVE WORKING - ELECTRICAL INSULATING BLANKETS
BS EN 16240:2013 Light transmitting flat solid polycarbonate (PC) sheets for internal and external use in roofs, walls and ceilings. Requirements and test methods
BS ISO 25762 : 2009 PLASTICS - GUIDANCE ON THE ASSESSMENT OF THE FIRE CHARACTERISTICS AND FIRE PERFORMANCE OF FIBRE-REINFORCED POLYMER COMPOSITES
I.S. EN 1452-1:1999 PLASTICS PIPING SYSTEMS FOR WATER SUPPLY - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) - PART 1: GENERAL
BS 3558-1:1997 Glossary of rubber terms International terms
17/30333280 DC : 0 BS ISO 17422 - PLASTICS - ENVIRONMENTAL ASPECTS - GENERAL GUIDELINES FOR THEIR INCLUSION IN STANDARDS
14/30295044 DC : 0 BS ISO 19095-3 - ADHESIVES - EVALUATION OF THE ADHESION INTERFACE PERFORMANCE IN PLASTIC-METAL ASSEMBLIES - PART 3: TEST METHODS
14/30283167 DC : 0 BS ISO 18263-2 - PLASTICS - MIXTURES OF POLYPROPYLENE (PP) AND POLYETHYLENE (PE) RECYCLATE DERIVED FROM PP AND PE USED FOR FLEXIBLE AND RIGID CONSUMENR PACKAGING - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
07/30161754 DC : 0 BS ISO 15270 - PLASTICS - GUIDELINES FOR THE RECOVERY AND RECYCLING OF PLASTICS WASTE
11/30211349 DC : 0 BS ISO 13636 - PLASTICS - FILM AND SHEETING - NON-ORIENTED POLY(ETHYLENE TEREPHTHALATE) (PET) SHEETS
DIN EN ISO 11357-3:2013-04 PLASTICS - DIFFERENTIAL SCANNING CALORIMETRY (DSC) - PART 3: DETERMINATION OF TEMPERATURE AND ENTHALPY OF MELTING AND CRYSTALLIZATION (ISO 11357-3:2011)
BS EN 1013 : 2012 LIGHT TRANSMITTING SINGLE SKIN PROFILED PLASTICS SHEETS FOR INTERNAL AND EXTERNAL ROOFS, WALLS AND CEILINGS - REQUIREMENTS AND TEST METHODS
DIN EN ISO 306 E : 2014 PLASTICS - THERMOPLASTIC MATERIALS - DETERMINATION OF VICAT SOFTENING TEMPERATURE (VST) (ISO 306:2013)
NF EN ISO 1452-1 : 2010 PLASTICS PIPING SYSTEMS FOR WATER SUPPLY AND FOR BURIED AND ABOVE-GROUND DRAINAGE AND SEWERAGE UNDER PRESSURE - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) - PART 1: GENERAL
DIN EN ISO 22007-2:2015-12 Plastics - Determination of thermal conductivity and thermal diffusivity - Part 2: Transient plane heat source (hot disc) method (ISO 22007-2:2015)
BS EN 16575:2014 Bio-based products. Vocabulary
DIN EN 13245-2:2010-11 Plastics - Unplasticized poly(vinyl chloride) (PVC-U) profiles for building applications - Part 2: PVC-U profiles and PVC-UE profiles for internal and external wall and ceiling finishes (includes Corrigendum AC:2009)
UNE-EN ISO 11357-7:2016 Plastics - Differential scanning calorimetry (DSC) - Part 7: Determination of crystallization kinetics (ISO 11357-7:2015)
08/30185535 DC : DRAFT JULY 2008 BS EN ISO 1452-1 - PLASTICS PIPING SYSTEMS FOR WATER SUPPLY AND FOR BURIED AND ABOVE-GROUND DRAINAGE AND SEWERAGE UNDER PRESSURE - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC U) - PART 1: GENERAL
UNE-EN 15348:2015 Plastics - Recycled plastics - Characterization of poly(ethylene terephthalate) (PET) recyclates
UNI EN 15347 : 2008 PLASTICS - RECYCLED PLASTICS - CHARACTERISATION OF PLASTICS WASTES
07/30155372 DC : 0 BS ISO 877-1 - PLASTICS - METHODS OF EXPOSURE TO SOLAR RADIATION - PART 1: GENERAL GUIDANCE
PD CEN/TR 16953:2017 Medical gloves for single use. Guidance for selection
09/30183439 DC : 0 BS EN ISO 1133-2 - PLASTICS - DETERMINATION OF THE MELT MASS-FLOW RATE (MFR) AND THE MELT VOLUME-FLOW RATE (MVR) OF THERMOPLASTICS - PART 2: METHOD FOR MATERIALS SENSITIVE TO TIME-TEMPERATURE HISTORY AND/OR MOISTURE
BS ISO 21340:2017 Test methods for fibrous activated carbon
BS EN 61112:2009 Live working. Electrical insulating blankets
DIN EN 16575 E : 2014 BIO-BASED PRODUCTS - VOCABULARY
13/30240167 DC : 0 BS ISO 16365-2 - PLASTICS - THERMOPLASTIC POLYURETHANES FOR MOULDING AND EXTRUSION - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
UNI EN ISO 11358-1 : 2014 PLASTICS - THERMOGRAVIMETRY (TG) OF POLYMERS - PART 1: GENERAL PRINCIPLES
BS EN 60464-1:1999 Varnishes used for electrical insulation Definitions and general requirements
08/30194094 DC : 0 BS EN 13245-3 - PLASTICS - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) PROFILES FOR BUILDING APPLICATIONS - PART 3: DESIGNATION OF PVC-UE PROFILES
12/30252886 DC BS ISO 10364. Structural adhesives. Determination of the pot life (working life) of multi-component adhesives
BS ISO 16014-2:2012 Plastics. Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography Universal calibration method
DIN EN 15701:2015-02 (Draft) PLASTICS - THERMOPLASTIC JACKETS FOR INSULATION PRODUCTS FOR BUILDING EQUIPMENT AND INDUSTRIAL INSTALLATIONS - REQUIREMENTS AND TEST METHODS
BS ISO 18263-2:2015 Plastics. Mixtures of polypropylene (PP) and polyethylene (PE) recyclate derived from PP and PE used for flexible and rigid consumer packaging Preparation of test specimens and determination of properties
05/30141301 DC : DRAFT NOV 2005 ISO 20393 - RIGID CELLULAR PLASTICS - DETERMINATION OF LONG-TERM WATER ABSORPTION BY DIFFUSION
BS EN ISO 11357-4:2014 Plastics. Differential scanning calorimetry (DSC) Determination of specific heat capacity
BS ISO 17885:2015 Plastics piping systems. Mechanical fittings for pressure piping systems. Specifications
10/30211408 DC : 0 BS ISO 2561 - PLASTICS - DETERMINATION OF RESIDUAL STYRENE MONOMER IN POLYSTYRENE (PS) AND IMPACT-RESISTANT POLYSTYRENE (PS-I) BY GAS CHROMATOGRAPHY
BS ISO 16014-1:2012 Plastics. Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography General principles
BS ISO 16525-2:2014 Adhesives. Test methods for isotropic electrically conductive adhesives Determination of electrical characteristics for use in electronic assemblies
ISO 20965:2005 Plastics Determination of the transient extensional viscosity of polymer melts
14/30295038 DC : 0 BS ISO 19095-1 - ADHESIVES - EVALUATION OF THE ADHESION INTERFACE PERFORMANCE IN PLASTIC-METAL ASSEMBLIES - PART 1: GUIDELINES FOR THE APPROACH
PD CEN ISO/TR 22007-5:2014 Plastics. Determination of thermal conductivity and thermal diffusivity Results of interlaboratory testing of poly(methyl methacrylate) samples
BS EN ISO 16396-1:2015 Plastics. Polyamide (PA) moulding and extrusion materials Designation system, marking of products and basis for specifications
11/30237779 DC : DRAFT MAR 2011 BS ISO 18437-1 - MECHANICAL VIBRATION AND SHOCK - CHARACTERIZATION OF THE DYNAMIC MECHANICAL PROPERTIES OF VISCO-ELASTIC MATERIALS - PART 1: PRINCIPLES AND GUIDELINES
BS ISO 2559:2011 Textile glass. Mats (made from chopped or continuous strands). Designation and basis for specifications
01/121538 DC : DRAFT APRIL 2001 BS EN ISO 899-1 PLASTICS - DETERMINATION OF CREEP BEHAVIOUR - PART 1: TENSILE CREEP
BS ISO 1268-11:2005 Fibre-reinforced plastics. Methods of producing test plates Injection moulding of BMC and other long-fibre moulding compounds. Small plates
BS EN ISO 8062-1:2007 Geometrical product specifications (GPS). Dimensional and geometrical tolerances for moulded parts Vocabulary
08/30191143 DC : 0 BS EN 1555-1 - PLASTICS PIPING SYSTEMS FOR THE SUPPLY OF GASEOUS FUELS - POLYETHYLENE (PE) - PART 1: GENERAL
03/102186 DC : DRAFT AUG 2003 EN 14758-1 - PLASTICS PIPING SYSTEMS FOR NON-PRESSURE UNDERGROUND DRAINAGE AND SEWERAGE - POLYPROPYLENE WITH MINERAL MODIFIERS (PP-M) - PART 1: SPECIFICATIONS FOR PIPES, FITTINGS AND THE SYSTEM
06/30146370 DC : DRAFT SEP 2006 ISO 15439-1 - PLASTICS PIPING SYSTEMS FOR THE SUPPLY OF GASEOUS FUELS FOR MAXIMUM OPERATING PRESSURE UP TO AND INCLUDING 4 BAR - POLYAMIDE (PA) - PART 1: GENERAL
09/30191924 DC : 0 BS ISO 16014-5 - PLASTICS - DETERMINATION OF AVERAGE MOLECULAR MASS AND MOLECULAR MASS DISTRIBUTION OF POLYMERS USING SIZE-EXCLUSION CHROMATOGRAPHY - PART 5: LIGHT-SCATTERING METHOD
BS ISO 10724-1 : 1998 AMD 13328 PLASTICS - INJECTION MOULDING OF TEST SPECIMENS OF THERMOSETTING POWDER MOULDING COMPOUNDS (PMCS) - GENERAL PRINCIPLES AND MOULDING OF MULTIPURPOSE TEST SPECIMENS
04/30112206 DC : DRAFT APR 2004 BS ISO 22314 - PLASTICS - GLASS-FIBRE-REINFORCED PRODUCTS - DETERMINATION OF FIBRE LENGTH
UNE-EN ISO 11358-1:2015 Plastics - Thermogravimetry (TG) of polymers - Part 1: General principles (ISO 11358-1:2014)
PREN 1453-1 : DRAFT 2014 PLASTICS PIPING SYSTEMS WITH STRUCTURED-WALL PIPES FOR SOIL AND WASTE DISCHARGE (LOW AND HIGH TEMPERATURE) INSIDE BUILDINGS - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) - PART 1: SPECIFICATIONS FOR PIPES AND THE SYSTEM
10/30196253 DC : 0 BS ISO 14910-1 - PLASTICS - THERMOPLASTIC POLYESTER/ESTER AND POLYETHER/ESTER ELASTOMERS FOR MOULDING AND EXTRUSION - PART 1: DESIGNATION SYSTEM AND BASIS FOR SPECIFICATIONS
UNI EN 13245-2 : 2009 PLASTICS - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) PROFILES FOR BUILDING APPLICATIONS - PART 2: PVC-U PROFILES AND PVC-UE PROFILES FOR INTERNAL AND EXTERNAL WALL AND CEILING FINISHES
11/30238648 DC : DRAFT FEB 2011 BS EN 16240 - LIGHT TRANSMITTING FLAT SOLID POLYCARBONATE (PC) SHEETS FOR INTERNAL AND EXTERNAL ROOFS, WALLS AND CEILINGS - REQUIREMENTS AND TEST METHODS
BS ISO 11359-1:2014 Plastics. Thermomechanical analysis (TMA) General principles
BS ISO 4437-1:2014 Plastics piping systems for the supply of gaseous fuels. Polyethylene (PE) General
BS ISO 22314:2006 Plastics. Glass-fibre-reinforced products. Determination of fibre length
UNE-ISO 4901:2014 Reinforced plastics based on unsaturated-polyester resins. Determination of the residual styrene monomer content, as well as the content of other volatile aromatic hydrocarbons, by gas chromatography
UNE-EN ISO 22007-6:2015 Plastics - Determination of thermal conductivity and thermal diffusivity - Part 6: Comparative method for low thermal conductivities using a temperature-modulation technique (ISO 22007-6:2014)
UNE-ISO 1268-8:2012 Fibre-reinforced plastics. Methods of producing test plates. Part 8: Compression moulding of SMC and BMC
UNI EN 1329-1 : 2014 PLASTICS PIPING SYSTEMS FOR SOIL AND WASTE DISCHARGE (LOW AND HIGH TEMPERATURE) WITHIN THE BUILDING STRUCTURE - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) - PART 1: SPECIFICATIONS FOR PIPES, FITTINGS AND THE SYSTEM
DIN EN ISO 1452-1:2010-04 Plastics piping systems for water supply and for buried and above-ground drainage and sewerage under pressure - Unplasticized poly(vinyl chloride) (PVC-U) - Part 1: General (ISO 1452-1:2009)
DIN EN 131-6:2015-05 LADDERS - PART 6: TELESCOPIC LADDERS
BS ISO 2535 : 1997 AMD 10259 PLASTICS - UNSATURATED POLYESTER RESINS - MEASUREMENT OF GEL TIME AT 25 DEG C
DIN EN 16153:2015-05 LIGHT TRANSMITTING FLAT MULTIWALL POLYCARBONATE (PC) SHEETS FOR INTERNAL AND EXTERNAL USE IN ROOFS, WALLS AND CEILINGS - REQUIREMENTS AND TEST METHODS
DIN ISO 16486-1 E : 2015 PLASTICS PIPING SYSTEMS FOR THE SUPPLY OF GASEOUS FUELS - UNPLASTICIZED POLYAMIDE (PA-U) PIPING SYSTEMS WITH FUSION JOINTING AND MECHANICAL JOINTING - PART 1: GENERAL (ISO 16486-1:2012 + AMD 1:2014)
I.S. EN 15701:2016 PLASTICS - THERMOPLASTIC JACKETS FOR INSULATION PRODUCTS FOR BUILDING EQUIPMENT AND INDUSTRIAL INSTALLATIONS - REQUIREMENTS AND TEST METHODS
EN 1451-1:2017 Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Polypropylene (PP) - Part 1: Specifications for pipes, fittings and the system
DIN EN ISO 1183-1:2013-04 PLASTICS - METHODS FOR DETERMINING THE DENSITY OF NON-CELLULAR PLASTICS - PART 1: IMMERSION METHOD, LIQUID PYKNOMETER METHOD AND TITRATION METHOD (ISO 1183-1:2012)
ASTM D 6988 : 2013 : REDLINE Standard Guide for Determination of Thickness of Plastic Film Test Specimens
I.S. EN ISO 877-1:2010 PLASTICS - METHODS OF EXPOSURE TO SOLAR RADIATION - PART 1: GENERAL GUIDANCE
EN 1455-1:1999 Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Acrylonitrile-butadiene-styrene (ABS) - Part 1: Requirements for pipes, fittings and the system
UNI EN 15342 : 2008 PLASTICS - RECYCLED PLASTICS - CHARACTERIZATION OF POLYSTYRENE (PS) RECYCLATES
ONORM EN ISO 10927 : 2011 PLASTICS - DETERMINATION OF THE MOLECULAR MASS AND MOLECULAR MASS DISTRIBUTION OF POLYMER SPECIES BY MATRIX-ASSISTED LASER DESORPTION/IONIZATION TIME-OF-FLIGHT MASS SPECTROMETRY (MALDI-TOF-MS)
I.S. EN 131-6:2015 LADDERS - PART 6: TELESCOPIC LADDERS
UNI EN 16575 : 2014 BIO-BASED PRODUCTS - VOCABULARY
BS ISO 18437-2 : 2005 MECHANICAL VIBRATION AND SHOCK - CHARACTERIZATION OF THE DYNAMIC MECHANICAL PROPERTIES OF VISCO-ELASTIC MATERIALS - PART 2: RESONANCE METHOD
I.S. EN 1451-1:2017 PLASTICS PIPING SYSTEMS FOR SOIL AND WASTE DISCHARGE (LOW AND HIGH TEMPERATURE) WITHIN THE BUILDING STRUCTURE - POLYPROPYLENE (PP) - PART 1: SPECIFICATIONS FOR PIPES, FITTINGS AND THE SYSTEM
BS EN 1852-1:2018 Plastics piping systems for non-pressure underground drainage and sewerage. Polypropylene (PP) Specifications for pipes, fittings and the system
I.S. EN ISO 10927:2011 PLASTICS - DETERMINATION OF THE MOLECULAR MASS AND MOLECULAR MASS DISTRIBUTION OF POLYMER SPECIES BY MATRIX-ASSISTED LASER DESORPTION/IONIZATION TIME-OF-FLIGHT MASS SPECTROMETRY (MALDI-TOF-MS)
ISO 15876-1:2017 Plastics piping systems for hot and cold water installations — Polybutene (PB) — Part 1: General
I.S. EN 15870:2009 ADHESIVES - DETERMINATION OF TENSILE STRENGTH OF BUTT JOINTS
ISO 11357-3:2018 Plastics — Differential scanning calorimetry (DSC) — Part 3: Determination of temperature and enthalpy of melting and crystallization
ISO 15033:2007 Plastics Determination of caprolactam and its cyclic and linear oligomers by HPLC
I.S. EN 16245-2:2013 FIBRE-REINFORCED PLASTIC COMPOSITES - DECLARATION OF RAW MATERIAL CHARACTERISTICS - PART 2: SPECIFIC REQUIREMENTS FOR RESIN, CURING SYSTEMS, ADDITIVES AND MODIFIERS
I.S. EN ISO 16014-5:2012 PLASTICS - DETERMINATION OF AVERAGE MOLECULAR MASS AND MOLECULAR MASS DISTRIBUTION OF POLYMERS USING SIZE-EXCLUSION CHROMATOGRAPHY - PART 5: METHOD USING LIGHT-SCATTERING DETECTION (ISO 16014-5:2012)
BS EN 1451-1:2017 Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure. Polypropylene (PP) Specifications for pipes, fittings and the system
UNI EN ISO 10927 : 2011 PLASTICS - DETERMINATION OF THE MOLECULAR MASS AND MOLECULAR MASS DISTRIBUTION OF POLYMER SPECIES BY MATRIX-ASSISTED LASER DESORPTION/IONIZATION TIME-OF-FLIGHT MASS SPECTROMETRY (MALDITOF-MS)
EN ISO 1043-1:2011/A1:2016 PLASTICS - SYMBOLS AND ABBREVIATED TERMS - PART 1: BASIC POLYMER AND THEIR SPECIAL CHARACTERISTICS (ISO 1043-1:2011/AMD 1:2016)
DIN EN ISO 15877-1:2011-03 Plastics piping systems for hot and cold water installations - Chlorinated poly(vinyl chloride) (PVC-C) - Part 1: General (ISO 15877-1:2009 + AMD 1:2010)
EN ISO 6721-1:2011 Plastics - Determination of dynamic mechanical properties - Part 1: General principles (ISO 6721-1:2011)
CEN/TR 16953:2017 Medical gloves for single use - Guidance for selection
UNI EN ISO 4007 : 2012 PERSONAL PROTECTIVE EQUIPMENT - EYE AND FACE PROTECTION - VOCABULARY
I.S. EN ISO 11357-4:2014 PLASTICS - DIFFERENTIAL SCANNING CALORIMETRY (DSC) - PART 4: DETERMINATION OF SPECIFIC HEAT CAPACITY (ISO 11357-4:2014)
I.S. EN 13245-3:2010 PLASTICS - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) PROFILES FOR BUILDING APPLICATIONS - PART 3: DESIGNATION OF PVC-UE PROFILES
EN 17098-2:2018 Plastics - Barrier films for agricultural and horticultural soil disinfection by fumigation - Part 2: Method for film permeability determination using a static technique
EN 17098-1:2018 Plastics - Barrier films for agricultural and horticultural soil disinfection by fumigation - Part 1: Specifications for barrier films
PRCEN/TS 16861 : DRAFT 2014 PLASTICS - RECYCLED PLASTICS - DETERMINATION OF SELECTED MARKER COMPOUNDS IN FOOD GRADE RECYCLED POLYETHYLENE TEREPHTHALATE (PET)
UNI EN 13245-3 : 2010 PLASTICS - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) PROFILES FOR BUILDING APPLICATIONS - PART 3: DESIGNATION OF PVC-UE PROFILES
ASTM D 4092 : 2007 : R2013 Standard Terminology for Plastics: Dynamic Mechanical Properties
EN ISO 1183-1:2012 Plastics - Methods for determining the density of non-cellular plastics - Part 1: Immersion method, liquid pyknometer method and titration method (ISO 1183-1:2012)
EN 60454-1:1994 Specifications for pressure-sensitive adhesive tapes for electrical purposes - Part 1: General requirements
NF ISO 11357-6 : 2011 PLASTICS - DIFFERENTIAL SCANNING CALORIMETRY (DSC) - PART 6: DETERMINATION OF OXIDATION INDUCTION TIME (ISOTHERMAL OIT) AND OXIDATION INDUCTION TEMPERATURE (DYNAMIC OIT)
EN 131-6:2015 Ladders - Part 6: Telescopic ladders
ISO 21067-1:2016 Packaging Vocabulary Part 1: General terms
EN ISO 10364:2018 Structural adhesives - Determination of the pot life (working life) of multi-component adhesives (ISO 10364:2015)
EN ISO 22007-1:2017 Plastics - Determination of thermal conductivity and thermal diffusivity - Part 1: General principles (ISO 22007-1:2017)
ISO 16014-4:2012 Plastics Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography Part 4: High-temperature method
ISO 8605:2001 Textile-glass-reinforced plastics — Sheet moulding compound (SMC) — Basis for a specification
ISO 17771:2003 Plastics — Thermoset moulding compounds — Determination of the degree of fibre wetting in SMC
EN 17033:2018 Plastics - Biodegradable mulch films for use in agriculture and horticulture - Requirements and test methods
IEC 60984:2014 Live working - Electrical insulating sleeves
I.S. EN ISO 15750-3:2008 PACKAGING - STEEL DRUMS - PART 3: INSERTED FLANGE-TYPE CLOSURE SYSTEMS
ISO 15166-1:1998 Adhesives Methods of preparing bulk specimens Part 1: Two-part systems
IEC 60903:2014 Live working - Electrical insulating gloves
ISO 20393:2007 Thermal-insulating materials Determination of long-term water absorption by diffusion
IEC 60454-1:1992 Specifications for pressure-sensitive adhesive tapes for electrical purposes - Part 1: General requirements
ISO 17221:2014 Plastics — Determination of image clarity (degree of sharpness of reflected or transmitted image)
I.S. EN 60464-1:1999 VARNISHES USED FOR ELECTRICAL INSULATION - PART 1: DEFINITIONS AND GENERAL REQUIREMENTS
DIN EN 12654-3:1998-12 Textile glass - Yarns - Part 3: General requirements for general applications; German version EN 12654-3:1998
DIN EN 1555-1:2010-12 Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) - Part 1: General
DIN EN ISO 295 E : 2004 PLASTICS - COMPRESSION MOULDING TEST SPECIMENS OF THERMOSETTING MATERIALS
DIN EN ISO 9163 E : 2005 TEXTILE GLASS - ROVINGS - MANUFACTURE OF TEST SPECIMENS AND DETERMINATION OF TENSILE STRENGTH OF IMPREGNATED ROVINGS
DIN EN ISO 8256:2005-05 Plastics - Determination of tensile-impact strength (ISO 8256:2004); German version EN ISO 8256:2004
DIN EN 14447 E : 2005 FIBRE REINFORCED PLASTICS - GLASS MAT REINFORCED THERMOPLASTICS (GMT) - DETERMINATION OF FLOWABILITY AND SOLIDIFICATION
DIN EN 12666-1:2011-11 Plastics piping systems for non-pressure underground drainage and sewerage - Polyethylene (PE) - Part 1: Specifications for pipes, fittings and the system (includes Amendment A1:2011)
DIN EN 14649 E : 2005 PRECAST CONCRETE PRODUCTS - TEST METHOD FOR STRENGTH RETENTION OF GLASS FIBRES IN CEMENT AND CONCRETE (SIC TEST)
DIN EN 15343:2008-02 Plastics - Recycled Plastics - Plastics recycling traceability and assessment of conformity and recycled content
DIN EN 15346:2015-01 PLASTICS - RECYCLED PLASTICS - CHARACTERIZATION OF POLY(VINYL CHLORIDE) (PVC) RECYCLATES
ISO 14526-1:1999 Plastics Phenolic powder moulding compounds (PF-PMCs) Part 1: Designation system and basis for specifications
UNE-EN ISO 306:2015 Plastics - Thermoplastic materials - Determination of Vicat softening temperature (VST) (ISO 306:2013)
BS EN 13417-1:2001 Reinforcement. Specifications for woven fabrics Designation
UNE-EN 1453-1:2017 Plastics piping systems with structured-wall pipes for soil and waste discharge (low and high temperature) inside buildings - Unplasticized poly(vinyl chloride) (PVC-U) - Part 1: Specifications for pipes and the system
BS EN 13417-2:2001 Reinforcement. Specifications for woven fabrics Methods of test and general requirements
BS EN 13121-1:2003 GRP tanks and vessels for use above ground Raw materials. Specification conditions and acceptance conditions
UNE-EN ISO 1043-3:2017 Plastics - Symbols and abbreviated terms - Part 3: Plasticizers (ISO 1043-3:2016)
UNE-EN 14758-1:2012 Plastics piping systems for non-pressure underground drainage and sewerage - Polypropylene with mineral modifiers (PP-MD) - Part 1: Specifications for pipes, fittings and the system
BS EN 397 : 2012 INDUSTRIAL SAFETY HELMETS
BS EN 12201-1:2011 Plastics piping systems for water supply, and for drainage and sewerage under pressure. Polyethylene (PE) General
ISO 15023-1:2017 Plastics — Poly(vinyl alcohol) (PVAL) materials — Part 1: Designation system and basis for specifications
BS EN ISO 8256:2004 Plastics. Determination of tensile-impact strength
BS EN ISO 13000-1:2005 Plastics. Polytetrafluoroethylene (PTFE) semi-finished products Requirements and designation
ISO 21003-1:2008 Multilayer piping systems for hot and cold water installations inside buildings — Part 1: General
BS EN ISO 8330:2014 Rubber and plastics hoses and hose assemblies. Vocabulary
BS EN 13706-2:2002 Reinforced plastics composites. Specifications for pultruded profiles Method of test and general requirements
ISO 13000-1:2005 Plastics Polytetrafluoroethylene (PTFE) semi-finished products Part 1: Requirements and designation
BS EN 13421:2006 Plastics. Thermoset moulding compounds. Composites and reinforcement fibres. Preparation of specimens for determining the anisotropy of the properties of compression moulding composites
BS EN ISO 14526-3:2000 Plastics. Phenolic powder moulding compounds (PF-PMCs) Requirements for selected moulding compounds
ISO 1043-3:2016 Plastics Symbols and abbreviated terms Part 3: Plasticizers
DIN EN 15344 E : 2008 PLASTICS - RECYCLED PLASTICS - CHARACTERISATION OF POLYETHYLENE (PE) RECYCLATES
ISO 15252-3:1999 Plastics Epoxy powder moulding compounds (EP-PMCs) Part 3: Requirements for selected moulding compounds
UNE-EN ISO 1874-2:2013 Plastics - Polyamide (PA) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 1874-2:2012)
I.S. EN 12006-2:1998 NON ACTIVE SURGICAL IMPLANTS - PARTICULAR REQUIREMENTS FOR CARDIAC AND VASCULAR IMPLANTS - PART 2: VASCULAR PROSTHESES INCLUDING CARDIAC VALVE CONDUITS
EN ISO 14527-1 : 1999 Plastics - Urea-formaldehyde and urea/melamine-formaldehyde powder moulding compounds (UF- and UF/MF-PMCs) - Part 1: Designation system and basis for specifications (ISO 14527-1:1999)
EN ISO 12086-1:2006/AC:2007 PLASTICS - FLUOROPOLYMER DISPERSIONS AND MOULDING AND EXTRUSION MATERIALS - PART 1: DESIGNATION SYSTEM AND BASIS FOR SPECIFICATIONS
EN ISO 15750-3:2008 Packaging - Steel drums - Part 3: Inserted flange-type closure systems (ISO 15750-3:2002)
EN 14118-3:2003 Reinforcement - Specifications for textile glass mats (chopped strand and continuous filament mats) - Part 3: Specific requirements
EN 14408-1:2004 Plastics piping systems for renovation of underground gas supply networks - Part 1: General
EN 16245-2:2013 Fibre-reinforced plastic composites - Declaration of raw material characteristics - Part 2: Specific requirements for resin, curing systems, additives and modifiers
EN 14118-1:2003 Reinforcement - Specifications for textile glass mats (chopped strand and continuous filament mats) - Part 1: Designation
EN 16240:2013 Light transmitting flat solid polycarbonate (PC) sheets for internal and external use in roofs, walls and ceilings - Requirements and test methods
UNI EN ISO 1874-2 : 2013 PLASTICS - POLYAMIDE (PA) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
UNI EN 13245-1 : 2010 PLASTICS - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) PROFILES FOR BUILDING APPLICATIONS - PART 1: DESIGNATION OF PVC-U PROFILES
UNI EN 16245-2 : 2013 FIBRE-REINFORCED PLASTIC COMPOSITES - DECLARATION OF RAW MATERIAL CHARACTERISTICS - PART 2: SPECIFIC REQUIREMENTS FOR RESIN, CURING SYSTEMS, ADDITIVES AND MODIFIERS
UNI EN ISO 8330 : 2014 RUBBER AND PLASTICS HOSES AND HOSE ASSEMBLIES - VOCABULARY
ONORM EN ISO 11358-1 : 2014 PLASTICS - THERMOGRAVIMETRY (TG) OF POLYMERS - PART 1: GENERAL PRINCIPLES (ISO 11358-1:2014)
UNI EN 12006-2 : 2009 NON ACTIVE SURGICAL IMPLANTS - PARTICULAR REQUIREMENTS FOR CARDIAC AND VASCULAR IMPLANTS - PART 2: VASCULAR PROSTHESES INCLUDING CARDIAC VALVE CONDUITS
UNI EN 12201-1 : 2012 PLASTICS PIPING SYSTEMS FOR WATER SUPPLY, AND FOR DRAINAGE AND SEWERAGE UNDER PRESSURE - POLYETHYLENE (PE) - PART 1: GENERAL
EN ISO 3672-1:2001 Plastics - Unsaturated-polyester resins (UP-R) - Part 1: Designation system (ISO 3672-1:2000)
UNI EN 12666-1 : 2011 PLASTICS PIPING SYSTEMS FOR NON-PRESSURE UNDERGROUND DRAINAGE AND SEWERAGE - POLYETHYLENE (PE) - PART 1: SPECIFICATIONS FOR PIPES, FITTINGS AND THE SYSTEM
UNI EN 14052 : 2013 HIGH PERFORMANCE INDUSTRIAL HELMETS
UNI EN ISO 11337 : 2011 PLASTICS - POLYAMIDES - DETERMINATION OF [EPSILON]-CAPROLACTAM AND [OMEGA]-LAUROLACTAME BY GAS CHROMATOGRAPHY
UNI EN ISO 6401 : 2009 PLASTICS - POLY(VINYL CHLORIDE) - DETERMINATION OF RESIDUAL VINYL CHLORIDE MONOMER-GAS-CHROMATOGRAPHIC METHOD
EN 14020-3:2002 Reinforcements - Specification for textile glass rovings - Part 3: Specific requirements
UNI EN ISO 604 : 2008 PLASTICS - DETERMINATION OF COMPRESSIVE PROPERTIES
ONORM EN ISO 11357-7 : 2015 PLASTICS - DIFFERENTIAL SCANNING CALORIMETRY (DSC) - PART 7: DETERMINATION OF CRYSTALLIZATION KINETICS (ISO 11357-7:2015)
UNI EN ISO 306 : 2014 PLASTICS - THERMOPLASTIC MATERIALS - DETERMINATION OF VICAT SOFTENING TEMPERATURE (VST)
UNI EN 1401-1 : 2009 PLASTICS PIPING SYSTEMS FOR NON- PRESSURE UNDERGROUND DRAINAGE AND SEWERAGE - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) - PART 1: SPECIFICATIONS FOR PIPES, FITTINGS AND THE SYSTEM
UNI EN ISO 12086-2 : 2006 PLASTICS - FLUOROPOLYMER DISPERSIONS AND MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
UNI EN 14758-1 : 2012 PLASTICS PIPING SYSTEMS FOR NON- PRESSURE UNDERGROUND DRAINAGE AND SEWERAGE - POLYPROPYLENE WITH MINERAL MODIFIERS (PP-MD) - PART 1: SPECIFICATIONS FOR PIPES, FITTINGS AND THE SYSTEM
UNE-ISO 2561:2014 Plastics. Determination of residual styrene monomer in polystyrene (PS) and impact-resistant polystyrene (PS-I) by gas chromatography
ISO 22314:2006 Plastics — Glass-fibre-reinforced products — Determination of fibre length
DIN EN 15857 E : 2010 NON-DESTRUCTIVE TESTING - ACOUSTIC EMISSION - TESTING OF FIBRE-REINFORCED POLYMERS - SPECIFIC METHODOLOGY AND GENERAL EVALUATION CRITERIA
DIN EN 16240:2014-03 LIGHT TRANSMITTING FLAT SOLID POLYCARBONATE (PC) SHEETS FOR INTERNAL AND EXTERNAL USE IN ROOFS, WALLS AND CEILINGS - REQUIREMENTS AND TEST METHODS
S.R. CEN/TR 16953:2017 MEDICAL GLOVES FOR SINGLE USE - GUIDANCE FOR SELECTION
UNI EN ISO 1183-1 : 2013 PLASTICS - METHODS FOR DETERMINING THE DENSITY OF NON-CELLULAR PLASTICS - PART 1: IMMERSION METHOD, LIQUID PYKNOMETER METHOD AND TITRATION METHOD
ISO 18606:2013 Packaging and the environment — Organic recycling
BS ISO 19095-1:2015 Plastics. Evaluation of the adhesion interface performance in plastic-metal assemblies Guidelines for the approach
DIN EN ISO 22007-3:2012-04 Plastics - Determination of thermal conductivity and thermal diffusivity - Part 3: Temperature wave analysis method (ISO 22007-3:2008)
17/30341503 DC : DRAFT APR 2017 BS ISO 15033 - PLASTICS - DETERMINATION OF CAPROLACTAM AND ITS CYCLIC AND LINEAR OLIGOMERS BY HPLC
ISO 18437-6:2017 Mechanical vibration and shock — Characterization of the dynamic mechanical properties of visco-elastic materials — Part 6: Time-temperature superposition
ISO 178:2010 Plastics Determination of flexural properties
UNE-EN ISO 11357-6:2013 Plastics - Differential scanning calorimetry (DSC) - Part 6: Determination of oxidation induction time (isothermal OIT) and oxidation induction temperature (dynamic OIT) (ISO 11357-6:2008)
DIN EN ISO 11357-4:2014-10 Plastics - Differential scanning calorimetry (DSC) - Part 4: Determination of specific heat capacity (ISO 11357-4:2014)
UNI EN ISO 8062-1 : 2009 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL AND GEOMETRICAL TOLERANCES FOR MOULDED PARTS - PART 1: VOCABULARY
13/30212494 DC : 0 BS EN ISO 15494 - PLASTICS PIPING SYSTEMS FOR INDUSTRIAL APPLICATIONS - POLYBUTENE (PB), POLYETHYLENE (PE) AND POLYPROPYLENE (PP) - SPECIFICATIONS FOR COMPONENTS AND THE SYSTEM - METRIC SERIES
BS EN ISO 25762:2012 Plastics. Guidance on the assessment of the fire characteristics and fire performance of fibre-reinforced polymer composites
DD ENV 61112:2002 Blankets of insulating material for electrical purposes
BS ISO 17771:2003 Plastics. Thermoset moulding compounds. Determination of the degree of fibre wetting in SMC
09/30206298 DC : 0 BS EN 16011 - PLASTICS - RECYCLED PLASTICS - SAMPLE PREPARATION
11/30248330 DC : 0 BS ISO 17467-1 - PLASTICS PIPING SYSTEMS FOR THE SUPPLY OF GASEOUS FUELS - UNPLASTICIZED POLYAMIDE (PA-U) PIPING SYSTEMS JOINTED BY SOLVENT CEMENT - PART 1: GENERAL
UNI EN 15344 : 2008 PLASTICS - RECYCLED PLASTICS - CHARACTERISATION OF POLYETHYLENE (PE) RECYCLATES
BS EN ISO 11358-1:2014 Plastics. Thermogravimetry (TG) of polymers General principles
BS EN 61111 : 2010 LIVE WORKING - ELECTRICAL INSULATING MATTING
ISO 21004:2006 Plastics piping systems Multilayer pipes and their joints, based on thermoplastics, for water supply
I.S. EN ISO 15605:2004 ADHESIVES - SAMPLING
PD ISO/TR 18196:2016 Nanotechnologies. Measurement technique matrix for the characterization of nano-objects
ISO 4901:2011 Reinforced plastics based on unsaturated-polyester resins Determination of the residual styrene monomer content, as well as the content of other volatile aromatic hydrocarbons, by gas chromatography
10/30215996 DC : 0 BS EN 61212-3-1 - INSULATING MATERIALS - INDUSTRIAL RIGID ROUND LAMINATED TUBES AND RODS BASED ON THERMOSETTING RESINS FOR ELECTRICAL PURPOSES - PART 3: SPECIFICATIONS FOR INDIVIDUAL MATERIALS - SHEET 1: ROUND LAMINATED ROLLED TUBES
BS ISO 18437-5:2011 Mechanical vibration and shock. Characterization of the dynamic mechanical properties of visco-elastic materials Poisson ratio based on comparison between measurements and finite element analysis
BS EN ISO 15876-1:2017 Plastics piping systems for hot and cold water installations. Polybutene (PB) General
I.S. EN ISO 1452-1:2009 PLASTICS PIPING SYSTEMS FOR WATER SUPPLY AND FOR BURIED AND ABOVE-GROUND DRAINAGE AND SEWERAGE UNDER PRESSURE - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) - PART 1: GENERAL
BS ISO 19929:2017 Plastics. Determination of average molecular mass and mixture ratio of poly(ethylene glycol) and its derivatives by MALDI-TOF-MS
DD CEN/TS 14758-2:2007 Plastics piping systems for non-pressure underground drainage and sewerage. Polypropylene with mineral modifier(s) (PP-MD) Guidance for the assessment of conformity
DIN EN 1013:2015-03 LIGHT TRANSMITTING SINGLE SKIN PROFILED PLASTICS SHEETS FOR INTERNAL AND EXTERNAL ROOFS, WALLS AND CEILINGS - REQUIREMENTS AND TEST METHODS
I.S. EN 1329-1:2014 PLASTICS PIPING SYSTEMS FOR SOIL AND WASTE DISCHARGE (LOW AND HIGH TEMPERATURE) WITHIN THE BUILDING STRUCTURE - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) - PART 1: SPECIFICATIONS FOR PIPES, FITTINGS AND THE SYSTEM
DIN EN ISO 11357-7 E : 2015 PLASTICS - DIFFERENTIAL SCANNING CALORIMETRY (DSC) - PART 7: DETERMINATION OF CRYSTALLIZATION KINETICS (ISO 113577:2015)
09/30194950 DC : 0 BS ISO 11337 - PLASTICS - POLYAMIDES - DETERMINATION OF E-CAPROLACTAM AND W-LAUROLACTAM BY GAS CHROMATOGRAPHY
06/30151164 DC : 0 BS EN ISO 15877-1 - PLASTICS PIPING SYSTEMS FOR HOT AND COLD WATER INSTALLATIONS - CHLORINATED POLY(VINYL CHLORIDE) (PVC-C) - PART 1: GENERAL
PREN ISO 15494 : DRAFT 2013 PLASTICS PIPING SYSTEMS FOR INDUSTRIAL APPLICATIONS - POLYBUTENE (PB), POLYETHYLENE (PE) AND POLYPROPYLENE (PP) - SPECIFICATIONS FOR COMPONENTS AND THE SYSTEM - METRIC SERIES (ISO/DIS 15494:2013)
BS EN ISO 1452-1:2009 Plastics piping systems for water supply and for buried and above-ground drainage and sewerage under pressure. Unplasticized poly(vinyl chloride) (PVC U) General
13/30259881 DC : 0 BS ISO 22007-6 - PLASTICS - DETERMINATION OF THERMAL CONDUCTIVITY AND THERMAL DIFFUSIVITY - PART 6: COMPARATIVE METHOD FOR LOW THERMAL CONDUCTIVITIES USING A TEMPERATURE-MODULATION TECHNIQUE
SAE AMS 3970/1 : 2011 CARBON FIBER FABRIC REPAIR PREPREG, 120 DEGREES C (250 DEGREES F) VACUUM CURING - PART 1 - GENERAL REQUIREMENTS
UNI EN 15422 : 2008 PRECAST CONCRETE PRODUCTS - SPECIFICATION OF GLASS-FIBRES FOR REINFORCEMENT OF MORTARS AND CONCRETES
15/30302735 DC : 0 BS EN ISO 11469 - PLASTICS - GENERIC IDENTIFICATION AND MARKING OF PLASTICS PRODUCTS
PREN 131-6 : DRAFT 2017 LADDERS - PART 6: TELESCOPIC LADDERS
BS EN 13245-3:2010 Plastics. Unplasticized poly(vinyl chloride) (PVCU) profiles for building applications Designation of PVC-UE profiles
I.S. EN 14408-1:2004 PLASTICS PIPING SYSTEMS FOR RENOVATION OF UNDERGROUND GAS SUPPLY NETWORKS - PART 1: GENERAL
03/305847 DC : DRAFT APR 2003 ISO 18437-2 - MECHANICAL VIBRATION AND SHOCK - CHARACTERISATION OF THE DYNAMIC MECHANICAL PROPERTIES OF RESILIENT MATERIALS - PART 2: RESONANCE METHOD
14/30304003 DC : 0 BS EN 62899-1 ED.1 - PRINTED ELECTRONICS - MATERIALS - PART 1: SUBSTRATES
BS EN 15345:2007 Plastics. Recycled plastics. Characterization of polypropylene (PP) recyclates
UNE-EN ISO 11357-4:2014 Plastics - Differential scanning calorimetry (DSC) - Part 4: Determination of specific heat capacity (ISO 11357-4:2014)
04/30095069 DC : 0 BS EN 443 - FIREFIGHTERS HELMETS
BS ISO 1268-1:2001 Fibre-reinforced plastics. Methods of producing test plates General conditions
08/30170590 DC : DRAFT JULY 2008 BS EN ISO 12543-1 - GLASS IN BUILDING - LAMINATED GLASS AND LAMINATED SAFETY GLASS - PART 1: DEFINITIONS AND DESCRIPTION OF COMPONENT PARTS
08/30193485 DC : 0 BS ISO 17212 - STRUCTURAL ADHESIVES- GUIDELINES FOR THE SURFACE PREPARATION OF METALS AND PLASTICS PRIOR TO ADHESIVE BONDING
BS EN 15870:2009 Adhesives. Determination of tensile strength of butt joints
18/30367544 DC : DRAFT APR 2018 BS ISO 21257 - PLASTICS - POLYMER POLYOLS FOR USE IN THE PRODUCTION OF POLYURETHANE - DETERMINATION OF THE RESIDUAL ACRYLONITRILE AND STYRENE MONOMER CONTENT BY GAS CHROMATOGRAPHY
BS EN ISO 8257-1:2006 Plastics. Poly(methyl methacrylate)(PMMA) moulding and extrusion materials Designation system and basis for specifications
BS EN 16245-2:2013 Fibre-reinforced plastic composites. Declaration of raw material characteristics Specific requirements for resin, curing systems, additives and modifiers
BS EN ISO 22007-1:2017 Plastics. Determination of thermal conductivity and thermal diffusivity General principles
BS ISO 12000:2014 Plastics/rubber. Polymer dispersions and rubber lattices (natural and synthetic). Definitions and review of test methods
BS EN ISO 11357-3:2013 Plastics. Differential scanning calorimetry (DSC) Determination of temperature and enthalpy of melting and crystallization
04/30091867 DC : DRAFT FEB 2004 BS EN ISO 12086-1 - PLASTICS - FLUOROPOLYMER DISPERSIONS AND MOULDING AND EXTRUSION MATERIALS - PART 1: DESIGNATION SYSTEM AND BASIS FOR SPECIFICATIONS
BS EN 15857:2010 Non-destructive testing. Acoustic emission. Testing of fibre-reinforced polymers. Specific methodology and general evaluation criteria
16/30330542 DC : 0 BS EN ISO 22007-1 - PLASTICS - DETERMINATION OF THERMAL CONDUCTIVITY AND THERMAL DIFFUSIVITY - PART 1: GENERAL PRINCIPLES
14/30268127 DC : 0 BS EN ISO 11357-7 - PLASTICS - DIFFERENTIAL SCANNING CALORIMETRY (DSC) - PART 7: DETERMINATION OF CRYSTALLIZATION KINETICS
BS ISO 22007-6 : 2014 PLASTICS - DETERMINATION OF THERMAL CONDUCTIVITY AND THERMAL DIFFUSIVITY - PART 6: COMPARATIVE METHOD FOR LOW THERMAL CONDUCTIVITIES USING A TEMPERATURE-MODULATION TECHNIQUE
17/30348289 DC : 0 BS EN 17098-2 - PLASTICS - BARRIER FILMS FOR AGRICULTURAL AND HORTICULTURAL SOIL DISINFECTION BY FUMIGATION - PART 2: METHOD FOR FILM PERMEABILITY DETERMINATION USING A STATIC TECHNIQUE
BS EN ISO 20568-1:2017 Plastics. Fluoropolymer dispersions and moulding and extrusion materials Designation system and basis for specifications
DIN EN ISO 11358-1:2014-10 Plastics - Thermogravimetry (TG) of polymers - Part 1: General principles (ISO 11358-1:2014)
BS ISO 11359-3:2002 Plastics. Thermomechanical analysis (TMA) Determination of penetration temperature
BS ISO 9163 : 1996 AMD 10351 TEXTILE GLASS - ROVINGS - MANUFACTURE OF TEST SPECIMENS AND DETERMINATION OF TENSILE STRENGTH OF IMPREGNATED ROVINGS
ISO 13895:1996 Adhesives Guidelines for the surface preparation of plastics
15/30321222 DC : 0 BS EN ISO 20568-1 - PLASTICS - FLUOROPOLYMER DISPERSION AND MOULDING AND EXTRUSION MATERIALS - PART 1: DESIGNATION SYSTEM AND BASIS FOR SPECIFICATIONS
UNI EN ISO 1452-1 : 2010 PLASTICS PIPING SYSTEMS FOR WATER SUPPLY AND FOR BURIED AND ABOVE-GROUND DRAINAGE AND SEWERAGE UNDER PRESSURE - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) - PART 1: GENERAL
BS 7746:1994 Generic identification and marking of plastics products
15/30321226 DC : 0 BS EN ISO 20568-2 - PLASTICS - FLUOROPOLYMER DISPERSION AND MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
DIN EN 15345 E : 2008 PLASTICS - RECYCLED PLASTICS - CHARACTERISATION OF POLYPROPYLENE (PP) RECYCLATES
BS EN 50237:2000 Gloves and mitts with mechanical protection for electrical purposes
BS IEC 61942:1997 Live working. Gloves and mitts with mechanical protection
UNE-ISO 1268-1:2012 Fibre-reinforced plastics -- Methods of producing test plates -- Part 1: General conditions
UNE-EN 15857:2010 Non-destructive testing - Acoustic emission - Testing of fibre-reinforced polymers - Specific methodology and general evaluation criteria
UNE-EN ISO 11357-2:2015 Plastics - Differential scanning calorimetry (DSC) - Part 2: Determination of glass transition temperature and glass transition step height (ISO 11357-2:2013)
18/30344274 DC : DRAFT APR 2018 BS ISO 21475 - PLASTICS - METHODS OF EXPOSURE TO DETERMINE THE WAVELENGTH DEPENDENT DEGRADATION USING SPECTRALLY DISPERSED RADIATION
BS EN ISO 21003-1:2008 Multilayer piping systems for hot and cold water installations inside buildings General
17/30350551 DC : 0 BS EN ISO 10927 - PLASTICS - DETERMINATION OF THE MOLECULAR MASS AND MOLECULAR MASS DISTRIBUTION OF POLYMER SPECIES BY MATRIX-ASSISTED LASER DESORPTION/IONIZATION TIME-OF-FLIGHT MASS SPECTROMETRY (MALDI-TOF-MS)
BS 7297-1:1990 Haemodialysers and related equipment Specification for haemodialysers, haemofilters and haemoconcentrators
12/30254694 DC : DRAFT MAR 2012 BS ISO 16525-8 - ADHESIVES - TEST METHODS FOR ISOTROPICALLY ELECTRICALLY CONDUCTING ADHESIVES - PART 8: ELECTROCHEMICAL-MIGRATION TEST METHODS
01/102261 DC : DRAFT FEB 2001 BS EN ISO 10318 - GEOSYNTHETICS - GEOTEXTILES, GEOTEXTILE-RELATED PRODUCTS, GEOMEMBRANES AND GEOSYNTHETIC CLAY LINERS - TERMS AND THEIR DEFINITIONS
BS ISO 12815:2013 Fibre-reinforced plastic composites. Determination of plain-pin bearingstrength
12/30254682 DC : DRAFT MAR 2012 BS ISO 16525-4 - ADHESIVES - TEST METHODS FOR ISOTROPICALLY ELECTRICALLY CONDUCTING ADHESIVES - PART 4: DETERMINATION OF SHEAR STRENGTH AND ELECTRICAL RESISTANCE USING RIGID-TO-RIGID BONDED ASSEMBLIES
17/30350545 DC : 0 BS EN ISO 11357-3 - PLASTICS - DIFFERENTIAL SCANNING CALORIMETRY (DSC) - PART 3: DETERMINATION OF TEMPERATURE AND ENTHALPY OF MELTING AND CRYSTALLIZATION
DIN EN 15348:2015-01 PLASTICS - RECYCLED PLASTICS - CHARACTERIZATION OF POLY(ETHYLENE TEREPHTHALATE) (PET) RECYCLATES
12/30256736 DC : 0 BS ISO 4437-1 - PLASTICS PIPING SYSTEMS FOR THE SUPPLY OF GASEOUS FUELS - POLYETHYLENE (PE) - PART 1: GENERAL
BS EN 62011-1:2002 Insulating materials. Industrial, rigid, moulded, laminated tubes and rods of rectangular and hexagonal cross-section based on thermosetting resins for electrical purposes Definitions, designations and general requirements
BS ISO 19095-4:2015 Plastics. Evaluation of the adhesion interface performance in plastic-metal assemblies Environmental conditions for durability
BS EN 15348:2014 Plastics. Recycled plastics. Characterization of poly(ethylene terephthalate) (PET) recyclates
ISO 16486-1:2012 Plastics piping systems for the supply of gaseous fuels - Unplasticized polyamide (PA-U) piping systems with fusion jointing and mechanical jointing Part 1: General
BS EN ISO 877-1:2010 Plastics. Methods of exposure to solar radiation General guidance
16/30321523 DC : 0 BS ISO 19929 - PLASTICS - DETERMINATION OF AVERAGE MOLECULAR MASS AND MIXTURE RATIO OF POLY (ETHYLENE GLYCOL) AND ITS DERIVATIVES BY MALDI-TOF-MS
18/30370150 DC : DRAFT APR 2018 BS ISO 16014-3 - PLASTICS - DETERMINATION OF AVERAGE MOLECULAR WEIGHT AND MOLECULAR WEIGHT DISTRIBUTION OF POLYMERS USING SIZE-EXCLUSION CHROMATOGRAPHY - PART 3: LOW-TEMPERATURE METHOD
DIN EN ISO 11357-2 E : 2014 PLASTICS - DIFFERENTIAL SCANNING CALORIMETRY (DSC) - PART 2: DETERMINATION OF GLASS TRANSITION TEMPERATURE AND GLASS TRANSITION STEP HEIGHT (ISO 11357-2:2013)
12/30265045 DC : 0 BS ISO 17221 - PLASTICS - DETERMINATION OF IMAGE CLARITY (DEGREE OF SHARPNESS OF REFLECTED OR TRANSMITTED IMAGE)
BS ISO 18249:2015 Non-destructive testing. Acoustic emission testing. Specific methodology and general evaluation criteria for testing of fibre-reinforced polymers
06/30148323 DC : 0 ISO 24538 - PLASTICS - HOMOPOLYMER AND COPOLYMER RESINS OF VINYL CHLORIDE - DETERMINATION OF RESIDUAL VINYL CHLORIDE MONOMER - GAS-CHROMATOGRAPHIC METHOD ON DRY POWDER
PD CEN/TR 16149:2011 Guidance Document for drafting CEN/TC 158 Standards
11/30234454 DC : 0 BS EN ISO 6721-1 - PLASTICS - DETERMINATION OF DYNAMIC MECHANICAL PROPERTIES - PART 1: GENERAL PRINCIPLES
BS ISO 11357-7 : 2002
12/30242496 DC : DRAFT MAR 2012 BS ISO 16525-1 - ADHESIVES - TEST METHODS FOR ISOTROPICALLY ELECTRICALLY CONDUCTING ADHESIVES - PART 1: GENERAL TEST METHODS
08/30170168 DC : DRAFT JULY 2008 BS ISO 22391-1 - PLASTICS PIPING SYSTEMS FOR HOT AND COLD WATER INSTALLATIONS - POLYETHYLENE OF RAISED TEMPERATURE RESISTANCE (PE-RT) - PART 1: GENERAL
NF ISO 8516 : 2011 TEXTILE GLASS - TEXTURED YARNS - BASIS FOR A SPECIFICATION
I.S. EN ISO 1133-2:2011 PLASTICS - DETERMINATION OF THE MELT MASS-FLOW RATE (MFR) AND MELT VOLUME-FLOW RATE (MVR) OF THERMOPLASTICS - PART 2: METHOD FOR MATERIALS SENSITIVE TO TIME-TEMPERATURE HISTORY AND/OR MOISTURE (ISO 1133-2:2011)
DIN EN 15422 E : 2008 PRECAST CONCRETE PRODUCTS - SPECIFICATION OF GLASSFIBRES FOR REINFORCEMENT OF MORTARS AND CONCRETES
BS ISO 1382:2012 Rubber. Vocabulary
17/30335677 DC : 0 BS EN ISO 178 - PLASTICS - DETERMINATION OF FLEXURAL PROPERTIES
BS ISO 10724-2 : 1998 AMD 13401 PLASTICS - INJECTION MOULDING OF TEST SPECIMENS OF THERMOSETTING POWDER MOULDING COMPOUNDS (PMCS) - SMALL PLATES
UNE-EN ISO 1133-2:2012 Plastics - Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics - Part 2: Method for materials sensitive to time-temperature history and/or moisture (ISO 1133-2:2011)
NF EN ISO 1133-2 : 2012 PLASTICS - DETERMINATION OF THE MELT MASS-FLOW RATE (MFR) AND MELT VOLUME-FLOW RATE (MVR) OF THERMOPLASTICS - PART 2: METHOD FOR MATERIALS SENSITIVE TO TIME-TEMPERATURE HISTORY AND/OR MOISTURE
UNI EN ISO 11357-4 : 2014 PLASTICS - DIFFERENTIAL SCANNING CALORIMETRY (DSC) - PART 4: DETERMINATION OF SPECIFIC HEAT CAPACITY
NF ISO 3598 : 2011 TEXTILE GLASS - YARNS - BASIS FOR A SPECIFICATION
BS EN ISO 6721-1:2011 Plastics. Determination of dynamic mechanical properties General principles
BS 7544:1991 Method for graphical presentation of the complex modulus of damping materials
I.S. EN ISO 11357-6:2013 PLASTICS - DIFFERENTIAL SCANNING CALORIMETRY (DSC) - PART 6: DETERMINATION OF OXIDATION INDUCTION TIME (ISOTHERMAL OIT) AND OXIDATION INDUCTION TEMPERATURE (DYNAMIC OIT) (ISO 11357-6:2018)
09/30191988 DC : 0 BS ISO 10927 - DETERMINATION OF MOLECULAR MASS AND MOLECULAR MASS DISTRIBUTION OF POLYMER SPECIES BY MATRIX-ASSISTED LASER DESORPTION/IONIZATION TIME-OF-FLIGHT MASS SPECTROMETRY (MALDITOF-MS)
BS ISO 6237:2017 Adhesives. Wood-to-wood adhesive bonds. Determination of shear strength by tensile loading
ISO/TR 13329:2012 Nanomaterials Preparation of material safety data sheet (MSDS)
FD T50 063 : 95 FD PLASTICS - PROCESSING MATERIALS - GUIDE FOR THE ELABORATION OF A TECHNICAL SHEET
DIN EN ISO 1133-2:2012-03 Plastics - Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics - Part 2: Method for materials sensitive to time-temperature history and/or moisture (ISO 1133-2:2011)
09/30192414 DC : 0 BS ISO 16014-3 - PLASTICS - DETERMINATION OF AVERAGE MOLECULAR MASS AND MOLECULAR MASS DISTRIBUTION OF POLYMERS USING SIZE-EXCLUSION CHROMATOGRAPHY - PART 3: LOW-TEMPERATURE METHOD
DIN EN ISO 16396-2 E : 2017 PLASTICS - POLYAMIDE (PA) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES (ISO 16396-2:2017)
ISO 16525-4:2014 Adhesives Test methods for isotropic electrically conductive adhesives Part 4: Determination of shear strength and electrical resistance using rigid-to-rigid bonded assemblies
ISO 10927:2011 Plastics Determination of the molecular mass and molecular mass distribution of polymer species by matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF-MS)
BS ISO 12086-2 : 2001 AMD 10637 PLASTICS - FLUOROPOLYMER DISPERSIONS AND MOULDING AND EXTRUSION MATERIALS
ISO 15270:2008 Plastics — Guidelines for the recovery and recycling of plastics waste
ISO 10364:2015 Structural adhesives — Determination of the pot life (working life) of multi-component adhesives
I.S. EN ISO 21003-1:2008 MULTILAYER PIPING SYSTEMS FOR HOT AND COLD WATER INSTALLATIONS INSIDE BUILDINGS - PART 1: GENERAL
BS ISO 18437-6:2017 Mechanical vibration and shock. Characterization of the dynamic mechanical properties of visco-elastic materials Time-temperature superposition
I.S. EN ISO 11358-1:2014 PLASTICS - THERMOGRAVIMETRY (TG) OF POLYMERS - PART 1: GENERAL PRINCIPLES (ISO 11358-1:2014)
S.R. CEN/TS 16011:2013 PLASTICS - RECYCLED PLASTICS - SAMPLE PREPARATION
I.S. EN ISO 25762:2012 PLASTICS - GUIDANCE ON THE ASSESSMENT OF THE FIRE CHARACTERISTICS AND FIRE PERFORMANCE OF FIBRE-REINFORCED POLYMER COMPOSITES (ISO 25762:2009)
I.S. EN 16240:2013 LIGHT TRANSMITTING FLAT SOLID POLYCARBONATE (PC) SHEETS FOR INTERNAL AND EXTERNAL USE IN ROOFS, WALLS AND CEILINGS - REQUIREMENTS AND TEST METHODS
I.S. EN 13245-2:2008 PLASTICS - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) PROFILES FOR BUILDING APPLICATIONS - PART 2: PVC-U PROFILES AND PVC-UE PROFILES FOR INTERNAL AND EXTERNAL WALL AND CEILING FINISHES
UNE-EN ISO 16396-2:2017 Plastics - Polyamide (PA) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 16396-2:2017)
EN ISO 4007:2012 Personal protective equipment - Eye and face protection - Vocabulary (ISO 4007:2012)
BS IEC 62899-201 : 2016 PRINTED ELECTRONICS - PART 201: MATERIALS - SUBSTRATES
NF EN ISO 877-1 : 2011 PLASTICS - METHODS OF EXPOSURE TO SOLAR RADIATION - PART 1: GENERAL GUIDANCE
I.S. EN 17098-2:2018 PLASTICS - BARRIER FILMS FOR AGRICULTURAL AND HORTICULTURAL SOIL DISINFECTION BY FUMIGATION - PART 2: METHOD FOR FILM PERMEABILITY DETERMINATION USING A STATIC TECHNIQUE
ISO 16014-5:2012 Plastics Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography Part 5: Method using light-scattering detection
ISO 12815:2013 Fibre-reinforced plastic composites — Determination of plain-pin bearing strength
I.S. EN ISO 11357-3:2013 PLASTICS - DIFFERENTIAL SCANNING CALORIMETRY (DSC) - PART 3: DETERMINATION OF TEMPERATURE AND ENTHALPY OF MELTING AND CRYSTALLIZATION (ISO 11357-3:2018)
ISO 12418-2:2012 Plastics — Post-consumer poly(ethylene terephthalate) (PET) bottle recyclates — Part 2: Preparation of test specimens and determination of properties
ISO 6707-3:2017 Buildings and civil engineering works — Vocabulary — Part 3: Sustainability terms
ISO 11359-3:2002 Plastics Thermomechanical analysis (TMA) Part 3: Determination of penetration temperature
BS EN 13476-1:2007 Plastics piping systems for non-pressure underground drainage and sewerage. Structured-wall piping systems of unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) General requirements and performance characteristics
I.S. EN 1013:2012 LIGHT TRANSMITTING SINGLE SKIN PROFILED PLASTICS SHEETS FOR INTERNAL AND EXTERNAL ROOFS, WALLS AND CEILINGS - REQUIREMENTS AND TEST METHODS
BS ISO 16014-4:2012 Plastics. Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography High-temperature method
ISO 1183-1:2012 Plastics Methods for determining the density of non-cellular plastics Part 1: Immersion method, liquid pyknometer method and titration method
BS 2782-7 Method 730A:1979 Methods of testing plastics. Rheological properties Determination of reduced viscosity (viscosity number) and intrinsic viscosity of plastics in dilute solution
BS EN ISO 15877-1 : 2009 PLASTICS PIPING SYSTEMS FOR HOT AND COLD WATER INSTALLATIONS - CHLORINATED POLY(VINYL CHLORIDE) (PVC-C) - PART 1: GENERAL
CEI EN 60455-1 : 1999 RESIN BASED REACTIVE COMPOUNDS USED FOR ELECTRICAL INSULATION - PART 1: DEFINITIONS AND GENERAL REQUIREMENTS
EN ISO 15876-1:2017 Plastics piping systems for hot and cold water installations - Polybutene (PB) - Part 1: General (ISO 15876-1:2017)
UNI EN ISO 16014-5 : 2013 PLASTICS - DETERMINATION OF AVERAGE MOLECULAR MASS AND MOLECULAR MASS DISTRIBUTION OF POLYMERS USING SIZE-EXCLUSION CHROMATOGRAPHY - PART 5: METHOD USING LIGHT-SCATTERING DETECTION
BS EN 17098-1:2018 Plastics. Barrier films for agricultural and horticultural soil disinfection by fumigation Specifications for barrier films
DIN EN ISO 6721-1:2011-08 PLASTICS - DETERMINATION OF DYNAMIC MECHANICAL PROPERTIES - PART 1: GENERAL PRINCIPLES
DIN EN ISO 15494:2016-03 PLASTICS PIPING SYSTEMS FOR INDUSTRIAL APPLICATIONS - POLYBUTENE (PB), POLYETHYLENE (PE), POLYETHYLENE OF RAISED TEMPERATURE RESISTANCE (PE-RT), CROSSLINKED POLYETHYLENE (PE-X), POLYPROPYLENE (PP) - METRIC SERIES FOR SPECIFICATIONS FOR COMPONENTS AND THE SYSTEM (ISO 15494:2015)
ISO 18437-3:2005 Mechanical vibration and shock — Characterization of the dynamic mechanical properties of visco-elastic materials — Part 3: Cantilever shear beam method
EN 60455-1:1998 Resin based reactive compounds used for electrical insulation - Part 1: Definitions and general requirements
PREN 13476-1 : DRAFT 2015 PLASTICS PIPING SYSTEMS FOR NON-PRESSURE UNDERGROUND DRAINAGE AND SEWERAGE - STRUCTURED-WALL PIPING SYSTEMS OF UNPLASTICIZED POLY(VINYLSEWERAGE - STRUCTURED-WALL PIPING SYSTEMS OF UNPLASTICIZED POLY(VINYL - PART 1: GENERAL REQUIREMENTS AND PERFORMANCE CHARACTERISTICS
CLC/TS 61112:2006 Blankets of insulating material for electrical purposes
BS EN ISO 1183-1:2012 Plastics. Methods for determining the density of non-cellular plastics Immersion method, liquid pyknometer method and titration method
PREN 14758-1 : DRAFT 2011 PLASTICS PIPING SYSTEMS FOR NON-PRESSURE UNDERGROUND DRAINAGE AND SEWERAGE - POLYPROPYLENE WITH MINERAL MODIFIERS (PP-MD) - PART 1: SPECIFICATIONS FOR PIPES, FITTINGS AND THE SYSTEM
I.S. EN ISO 22007-6:2015 PLASTICS - DETERMINATION OF THERMAL CONDUCTIVITY AND THERMAL DIFFUSIVITY - PART 6: COMPARATIVE METHOD FOR LOW THERMAL CONDUCTIVITIES USING A TEMPERATURE-MODULATION TECHNIQUE (ISO 22007-6:2014)
ISO 6721-12:2009 Plastics Determination of dynamic mechanical properties Part 12: Compressive vibration Non-resonance method
ISO 21138-1:2007 Plastics piping systems for non-pressure underground drainage and sewerage Structured-wall piping systems of unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) Part 1: Material specifications and performance criteria for pipes, fittings and system
ISO 16014-2:2012 Plastics Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography Part 2: Universal calibration method
ISO 19095-1:2015 Plastics Evaluation of the adhesion interface performance in plastic-metal assemblies Part 1: Guidelines for the approach
ISO 4427-1:2007 Plastics piping systems Polyethylene (PE) pipes and fittings for water supply Part 1: General
ISO/TR 18196:2016 Nanotechnologies — Measurement technique matrix for the characterization of nano-objects
ISO 16014-3:2012 Plastics Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography Part 3: Low-temperature method
ISO 15439-1:2007 Plastics piping systems for the supply of gaseous fuels for maximum operating pressure up to and including 0,4 MPa (4 bar) Polyamide (PA) Part 1: General
I.S. EN 1455-1:1999 PLASTICS PIPING SYSTEMS FOR SOIL AND WASTE DISCHARGE (LOW AND HIGH TEMPERATURE) WITHIN THE BUILDING STRUCTURE - ACRYLONITRILE-BUTADIENE-STYRENE (ABS) - PART 1: REQUIREMENTS FOR PIPES, FITTINGS AND THE SYSTEM
ISO 6721-1:2011 Plastics Determination of dynamic mechanical properties Part 1: General principles
EN 13476-1:2018 Plastics piping systems for non-pressure underground drainage and sewerage - Structured-wall piping systems of unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) - Part 1:General requirements and performance characteristics
I.S. EN 61112:2009 LIVE WORKING - ELECTRICAL INSULATING BLANKETS
I.S. EN ISO 1183-1:2012 PLASTICS - METHODS FOR DETERMINING THE DENSITY OF NON-CELLULAR PLASTICS - PART 1: IMMERSION METHOD, LIQUID PYKNOMETER METHOD AND TITRATION METHOD (ISO 1183-1:2012)
I.S. EN 60454-1:1995 SPECIFICATIONS FOR PRESSURE-SENSITIVE ADHESIVE TAPES FOR ELECTRICAL PURPOSES - PART 1: GENERAL REQUIREMENTS
ISO 18249:2015 Non-destructive testing Acoustic emission testing Specific methodology and general evaluation criteria for testing of fibre-reinforced polymers
ISO 13106:2014 Plastics Blow-moulded polypropylene containers for packaging of liquid foodstuffs
ISO 1268-1:2001 Fibre-reinforced plastics Methods of producing test plates Part 1: General conditions
ISO 8516:2011 Textile glass Textured yarns Basis for a specification
ISO 1268-10:2005 Fibre-reinforced plastics — Methods of producing test plates — Part 10: Injection moulding of BMC and other long-fibre moulding compounds — General principles and moulding of multipurpose test specimens
IEC 61942:1997 Live working - Gloves and mitts with mechanical protection
ISO 899-1:2017 Plastics — Determination of creep behaviour — Part 1: Tensile creep
EN ISO 15877-1:2009/A1:2010 Plastics piping systems for hot and cold water installations - Chlorinated poly(vinyl chloride) (PVC-C) - Part 1: General - Amendment 1 (ISO 15877-1:2009/AMD 1:2010)
UNE-EN ISO 1043-1:2012 Plastics - Symbols and abbreviated terms - Part 1: Basic polymers and their special characteristics (ISO 1043-1:2011)
ISO 11357-2:2013 Plastics Differential scanning calorimetry (DSC) Part 2: Determination of glass transition temperature and glass transition step height
DIN EN ISO 2078:2016-05 Textile glass - Yarns - Designation (ISO 2078:1993 + Amd 1:2015) (includes Amendment :2015)
DIN EN ISO 1043-1:2016-09 PLASTICS - SYMBOLS AND ABBREVIATED TERMS - PART 1: BASIC POLYMERS AND THEIR SPECIAL CHARACTERISTICS (ISO 1043-1:2011 + AMD.1:2016)
DIN EN ISO 1043-3:2015-09 (Draft) PLASTICS - SYMBOLS AND ABBREVIATED TERMS - PART 3: PLASTICIZERS (ISO 1043-3:2016)
DIN EN 14052:2013-04 High performance industrial helmets (includes Amendment A1:2012)
DIN EN 397:2013-04 Industrial safety helmets (includes Amendment A1:2012)
DIN EN 1453-1:2000-03 PLASTICS PIPING SYSTEMS WITH STRUCTURED-WALL PIPES FOR SOIL AND WASTE DISCHARGE (LOW AND HIGH TEMPERATURE) INSIDE BUILDINGS - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) - PART 1: SPECIFICATIONS FOR PIPES AND THE SYSTEM
BS EN 1453-1:2000 Plastics piping systems with structured-wall pipes for soil and waste discharge (low and high temperature) inside buildings. Unplasticized poly (vinyl chloride) (PVC-U) Specifications for pipes and the system
BS EN ISO 15874-1:2013 Plastics piping systems for hot and cold water installations. Polypropylene (PP) General
BS EN ISO 12543-1:2011 Glass in building. Laminated glass and laminated safety glass Definitions and description of component parts
BS EN ISO 6401:2008 Plastics. Poly(vinyl chloride). Determination of residual vinyl chloride monomer. Gas-chromatographic method
ISO 2535:2001 Plastics Unsaturated-polyester resins Measurement of gel time at ambient temperature
BS EN ISO 11469:2016 Plastics. Generic identification and marking of plastics products
BS EN ISO 14529-2:2000 Plastics. Melamine/phenolic powder moulding compounds (MP-PMCs) Preparation of test specimens and determination of properties
IEC 61479:2001+AMD1:2002 CSV Live working - Flexible conductor covers (line hoses) of insulating material
BS EN ISO 9163:2005 Textile glass. Rovings. Manufacture of test specimens and determination of tensile strength of impregnated rovings
BS EN ISO 1886:1995 Reinforcement fibres. Sampling plans applicable to received batches
BS EN ISO 2535:2002 Plastics. Unsaturated polyester resins. Measurement of gel time at ambient temperature
ISO 10082:1999 Plastics Phenolic resins Classification and test methods
IEC 61112:2009 Live working - Electrical insulating blankets
ISO 14529-3:1999 Plastics Melamine/phenolic powder moulding compounds (MP-PMCs) Part 3: Requirements for selected moulding compounds
BS EN ISO 15252-3:2000 Plastics. Epoxy powder moulding compounds (EP-PMCs) Requirements for selected moulding compounds
BS EN 14649:2005 Precast concrete products. Test method for strength retention of glass fibres in cement and concrete (SIC test)
ISO 11358-1:2014 Plastics Thermogravimetry (TG) of polymers Part 1: General principles
BS EN ISO 11339:2010 Adhesives. T-peel test for flexible-to-flexible bonded assemblies
BS EN ISO 12086-2:2006 Plastics. Fluoropolymer dispersions and moulding and extrusion materials Preparation of test specimens and determination of properties
ISO 15875-1:2003 Plastics piping systems for hot and cold water installations — Crosslinked polyethylene (PE-X) — Part 1: General
BS EN 12654-1:1999 Textile glass. Yarns Designation
IEC 60893-1:2004 Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 1: Definitions, designations and general requirements
ISO 11667:1997 Fibre-reinforced plastics — Moulding compounds and prepregs — Determination of resin, reinforced-fibre and mineral-filler content — Dissolution methods
BS EN ISO 13000-2:2005 Plastics. Polytetrafluoroethylene (PTFE) semi-finished products Preparation of test specimens and determination of properties
BS EN ISO 10724-2:2001 Plastics. Injection moulding of test specimens of thermosetting powder moulding compounds (PMCs) Small plates
BS EN 12576:1998 Plastics. Fibre reinforced composites. Preparation of compression moulded test plates of SMC, BMC and DMC
ISO 308:1994 Plastics Phenolic moulding materials Determination of acetone-soluble matter (apparent resin content of material in the unmoulded state)
ISO 14528-2:1999 Plastics Melamine-formaldehyde powder moulding compounds (MF-PMCs) Part 2: Preparation of test specimens and determination of properties
ISO 16525-9:2014 Adhesives Test methods for isotropic electrically conductive adhesives Part 9: Determination of high-speed signal-transmission characteristics
ISO/TS 80004-6:2013 Nanotechnologies Vocabulary Part 6: Nano-object characterization
ISO 1133-2:2011 Plastics Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics Part 2: Method for materials sensitive to time-temperature history and/or moisture
BS EN 12654-2:1999 Textile glass. Yarns Methods of test and general specifications
ISO 14528-3:1999 Plastics Melamine-formaldehyde powder moulding compounds (MF-PMCs) Part 3: Requirements for selected moulding compounds
ISO 11357-1:2016 Plastics — Differential scanning calorimetry (DSC) — Part 1: General principles
IEC 61212-3-2:2013 Insulating materials - Industrial rigid round laminated tubes and rods based on thermosetting resins for electrical purposes - Part 3: Specifications for individual materials - Sheet 2: Round laminated moulded tubes
ISO 12543-1:2011 Glass in building Laminated glass and laminated safety glass Part 1: Definitions and description of component parts
BS EN ISO 14527-1:2000 Plastics. Urea-formaldehyde and urea/melamine-formaldehyde powder moulding compounds (UF- and UF/MF-PMCs) Designation system and basis for specifications
BS EN 13677-3:2003 Reinforced thermoplastic moulding compounds. Specification for GMT Specific requirements
BS EN 12481:2001 Self adhesive tapes. Terminology
BS EN 1842:1997 Plastics. Thermoset moulding compounds (SMC-BMC). Determination of compression moulding shrinkage
BS EN 131-2 : 2010 LADDERS - PART 2: REQUIREMENTS, TESTING, MARKING
EN 1453-1:2017/AC:2017 PLASTICS PIPING SYSTEMS WITH STRUCTURED-WALL PIPES FOR SOIL AND WASTE DISCHARGE (LOW AND HIGH TEMPERATURE) INSIDE BUILDINGS - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) - PART 1: SPECIFICATIONS FOR PIPES AND THE SYSTEM
BS EN 1455-1:2000 Plastics piping systems for soil and waste (low and high temperature) within the building structure. Acrylonitrile-butadiene-styrene (ABS) Specifications for pipes, fittings and the system
BS EN ISO 14530-3:2000 Plastics. Unsaturated-polyester powder moulding compounds (UP-PMCs) Requirements for selected moulding compounds
BS EN 13003-2:1999 Para-aramid fibre filament yarns Methods of test and general specifications
BS EN ISO 899-2 : 2003 PLASTICS - DETERMINATION OF CREEP BEHAVIOUR - PART 2: FLEXURAL CREEP BY THREE-POINT LOADING
ISO 1874-2:2012 Plastics Polyamide (PA) moulding and extrusion materials Part 2: Preparation of test specimens and determination of properties
BS EN ISO 295:2004 Plastics. Compression moulding of test specimens of thermosetting materials
DIN EN 13245-1 E : 2010 PLASTICS - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) PROFILES FOR BUILDING APPLICATIONS - PART 1: DESIGNATION OF PVC-U PROFILES
UNE-EN 1555-1:2011 Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) - Part 1: General
BS EN 12200-1:2016 Plastics rainwater piping systems for above ground external use. Unplasticized poly(vinyl chloride) (PVC-U) Specifications for pipes, fittings and the system
UNE-EN ISO 8330:2014 Rubber and plastics hoses and hose assemblies - Vocabulary (ISO 8330:2014)
ISO 11409:1993 Plastics — Phenolic resins — Determination of heats and temperatures of reaction by differential scanning calorimetry
DIN EN 13245-1:2010-11 Plastics - Unplasticized poly(vinyl chloride) (PVC-U) profiles for building applications - Part 1: Designation of PVC-U profiles
BS EN 14409-1:2004 Plastics piping systems for renovation of underground water supply networks General
ISO 20568-2:2017 Plastics Fluoropolymer dispersions and moulding and extrusion materials Part 2: Preparation of test specimens and determination of properties
ISO 14530-2:1999 Plastics Unsaturated-polyester powder moulding compounds (UP-PMCs) Part 2: Preparation of test specimens and determination of properties
ISO 15605:2000 Adhesives Sampling
ISO 877-1:2009 Plastics — Methods of exposure to solar radiation — Part 1: General guidance
ISO 15493:2003 Plastics piping systems for industrial applications Acrylonitrile-butadiene-styrene (ABS), unplasticized poly(vinyl chloride) (PVC-U) and chlorinated poly(vinyl chloride) (PVC-C) Specifications for components and the system Metric series
UNE-EN ISO 15023-1:2017 Plastics - Poly(vinyl alcohol) (PVAL) materials - Part 1: Designation system and basis for specifications (ISO 15023-1:2017)
ISO/TR 27165:2012 Thermoplastics piping systems - Guidance for definitions of wall constructions for pipes
ISO 14530-1:1999 Plastics Unsaturated-polyester powder moulding compounds (UP-PMCs) Part 1: Designation system and basis for specifications
ISO 14527-3:1999 Plastics Urea-formaldehyde and urea/melamine-formaldehyde powder moulding compounds (UF- and UF/MF-PMCs) Part 3: Requirements for selected moulding compounds
ISO 10724-2:1998 Plastics — Injection moulding of test specimens of thermosetting powder moulding compounds (PMCs) — Part 2: Small plates
ISO 14529-2:1999 Plastics Melamine/phenolic powder moulding compounds (MP-PMCs) Part 2: Preparation of test specimens and determination of properties
ISO 14529-1:1999 Plastics Melamine/phenolic powder moulding compounds (MP-PMCs) Part 1: Designation system and basis for specifications
ISO/TR 22007-5:2011 Plastics Determination of thermal conductivity and thermal diffusivity Part 5: Results of interlaboratory testing of poly(methyl methacrylate) samples
BS EN ISO 14528-1:2000 Plastics. Melamine-formaldehyde powder moulding compounds (MF-PMCs) Designation system and basis for specifications
ISO 16396-1:2015 Plastics — Polyamide (PA) moulding and extrusion materials — Part 1: Designation system, marking of products and basis for specifications
BS EN ISO 306:2013 Plastics. Thermoplastic materials. Determination of Vicat softening temperature (VST)
ISO 12086-2:2006 Plastics Fluoropolymer dispersions and moulding and extrusion materials Part 2: Preparation of test specimens and determination of properties
ISO 22391-1:2009 Plastics piping systems for hot and cold water installations Polyethylene of raised temperature resistance (PE-RT) Part 1: General
BS EN 12666-1 : 2005 PLASTICS PIPING SYSTEMS FOR NON-PRESSURE UNDERGROUND DRAINAGE AND SEWERAGE - POLYETHYLENE (PE) - PART 1: SPECIFICATIONS FOR PIPES, FITTINGS AND THE SYSTEM
ISO 22007-6:2014 Plastics — Determination of thermal conductivity and thermal diffusivity — Part 6: Comparative method for low thermal conductivities using a temperature-modulation technique
ISO 306:2013 Plastics — Thermoplastic materials — Determination of Vicat softening temperature (VST)
ISO 12114:1997 Fibre-reinforced plastics — Thermosetting moulding compounds and prepregs — Determination of cure characteristics
ISO 14530-3:1999 Plastics Unsaturated-polyester powder moulding compounds (UP-PMCs) Part 3: Requirements for selected moulding compounds
BS EN 14020-1:2002 Reinforcements. Specification for textile glass rovings Designation
IEC 61212-1:2006 Insulating materials - Industrial rigid round laminated tubes and rods based on thermosetting resins for electrical purposes - Part 1: Definitions, designations and general requirements
BS EN ISO 14527-2:2000 Preparation of test specimens and determination of properties
ISO 14526-3:1999 Plastics Phenolic powder moulding compounds (PF-PMCs) Part 3: Requirements for selected moulding compounds
ISO 22007-3:2008 Plastics Determination of thermal conductivity and thermal diffusivity Part 3: Temperature wave analysis method
BS EN ISO 14527-3:2000 Plastics. Urea-formaldehyde and urea/melamine-formaldehyde powder moulding compounds (UF- and UF/MF-PMCs) Requirements for selected moulding compounds
BS EN 14020-2:2002 Reinforcements. Specification for textile glass rovings Methods of test and general requirements
BS EN 61212-3-1:2013 Insulating materials. Industrial rigid round laminated tubes and rods based on thermosetting resins for electrical purposes Specifications for individual materials. Sheet 1: Round laminated rolled tubes
BS EN 13245-1:2010 Plastics. Unplasticized poly(vinyl chloride) (PVC-U) profiles for building applications Designation of PVC-U profiles
ISO 8330:2007 Rubber and plastics hoses and hose assemblies Vocabulary
ISO 16396-2:2017 Plastics Polyamide (PA) moulding and extrusion materials Part 2: Preparation of test specimens and determination of properties
ISO 11337:2010 Plastics — Polyamides — Determination of e-caprolactam and w-laurolactam by gas chromatography
BS EN ISO 15875-1:2003 Plastics piping systems for hot and cold water installations. Crosslinked polyethylene (PE-X) General
IEC 60464-1:1998+AMD1:2006 CSV Varnishes used for electrical insulation - Part 1: Definitions and general requirements
ISO 20568-1:2017 Plastics Fluoropolymer dispersions and moulding and extrusion materials Part 1: Designation system and basis for specifications
ISO 13000-2:2005 Plastics Polytetrafluoroethylene (PTFE) semi-finished products Part 2: Preparation of test specimens and determination of properties
ISO 295:2004 Plastics — Compression moulding of test specimens of thermosetting materials
ISO 8256:2004 Plastics — Determination of tensile-impact strength
ISO 11469:2016 Plastics — Generic identification and marking of plastics products
ISO 15252-1:1999 Plastics Epoxy powder moulding compounds (EP-PMCs) Part 1: Designation system and basis for specifications
BS EN ISO 11357-1:2016 Plastics. Differential scanning calorimetry (DSC) General principles
ISO 14526-2:1999 Plastics Phenolic powder moulding compounds (PF-PMCs) Part 2: Preparation of test specimens and determination of properties
ISO 14528-1:1999 Plastics Melamine-formaldehyde powder moulding compounds (MF-PMCs) Part 1: Designation system and basis for specifications
ISO 15750-3:2002 Packaging Steel drums Part 3: Inserted flange-type closure systems
ISO 12086-1:2006 Plastics Fluoropolymer dispersions and moulding and extrusion materials Part 1: Designation system and basis for specifications
BS EN 14758-1:2012 Plastics piping systems for non-pressure underground drainage and sewerage. Polypropylene with mineral modifiers (PP-MD) Specifications for pipes, fittings and the system
ISO 3672-1:2000 Plastics Unsaturated-polyester resins (UP-R) Part 1: Designation system
BS EN ISO 11401:1998 Plastics. Phenolic resins. Separation by liquid chromatography
UNE-EN 1013:2013 Light transmitting single skin profiled plastics sheets for internal and external roofs, walls and ceilings - Requirements and test methods
UNE-EN ISO 11469:2017 Plastics - Generic identification and marking of plastics products (ISO 11469:2016)
BS EN 14052 : 2012 HIGH PERFORMANCE INDUSTRIAL HELMETS
EN ISO 11357-2:2014 Plastics - Differential scanning calorimetry (DSC) - Part 2: Determination of glass transition temperature and glass transition step height (ISO 11357-2:2013)
ISO 22007-2:2015 Plastics Determination of thermal conductivity and thermal diffusivity Part 2: Transient plane heat source (hot disc) method
BS EN 15342:2007 Plastics. Recycled plastics. Characterization of polystyrene (PS) recyclates
UNE-CEN/TR 15438:2012 IN Plastics piping systems - Guidance for coding of products and their intended uses
ISO 11401:1993 Plastics — Phenolic resins — Separation by liquid chromatography
ISO 10365:1992 Adhesives Designation of main failure patterns
UNE-CEN/TS 16011:2015 EX Plastics - Recycled plastics - Sample preparation
ISO 25762:2009 Plastics Guidance on the assessment of the fire characteristics and fire performance of fibre-reinforced polymer composites
ISO 11357-4:2014 Plastics Differential scanning calorimetry (DSC) Part 4: Determination of specific heat capacity
UNE-EN ISO 11357-1:2017 Plastics - Differential scanning calorimetry (DSC) - Part 1: General principles (ISO 11357-1:2016)
BS EN 12971-3:1999 Reinforcements. Specification for textile glass chopped strands Specific requirements
BS EN ISO 11667:2000 Fibre reinforced plastics. Moulding compounds and prepregs. Determination of resin, reinforcement-fibre and mineral-filler content. Dissolution methods
BS EN ISO 3672-1:2001 Plastics. Unsaturated-polyester resins (UP-R) Designation system
BS EN 61212-3-3:2006 Insulating materials. Industrial rigid round laminated tubes and rods based on thermosetting resins for electrical purposes Specifications for individual materials - Round laminated moulded rods
BS EN ISO 14529-3:2000 Plastics. Melamine/phenolic powder moulding compounds (MP-PMCs) Requirements for selected moulding compounds
BS EN ISO 14526-2:2000 Plastics. Phenolic powder moulding compounds (PF-PMCs) Preparation of test specimens and determination of properties
ISO 899-2:2003 Plastics Determination of creep behaviour Part 2: Flexural creep by three-point loading
ISO 10931:2005 Plastics piping systems for industrial applications Poly(vinylidene fluoride) (PVDF) Specifications for components and the system
EN 15342:2007 Plastics - Recycled Plastics - Characterization of polystyrene (PS) recyclates
EN 14447:2005 Fibre reinforced plastics - Glass mat reinforced thermoplastics (GMT) - Determination of flowability and solidification
EN 15422:2008 Precast concrete products - Specification of glassfibres for reinforcement of mortars and concretes
EN ISO 15252-1 : 1999 PLASTICS - EPOXY POWDER MOULDING COMPOUNDS (EP-PMCS) - PART 1: DESIGNATION SYSTEM AND BASIS FOR SPECIFICATIONS
EN 14409-1:2004 Plastics piping systems for renovation of underground water supply networks - Part 1: General
EN ISO 14527-3 : 1999 PLASTICS - UREA-FORMALDEHYDE AND UREA/MELAMINE-FORMALDEHYDE POWDER MOULDING COMPOUNDS (UF- AND UF/MF-PMCS) - PART 3: REQUIREMENTS FOR SELECTED MOULDING COMPOUNDS (ISO 14527-3:1999)
EN 14649 : 2005 PRECAST CONCRETE PRODUCTS - TEST METHOD FOR STRENGTH RETENTION OF GLASS FIBRES IN CEMENT AND CONCRETE (SIC TEST)
EN ISO 15252-2 : 1999 PLASTICS - EPOXY POWDER MOULDING COMPOUNDS (EP-PMCS) - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
EN 15857:2010 Non-destructive testing - Acoustic emission - Testing of fibre-reinforced polymers - Specific methodology and general evaluation criteria
EN 1452-1 : 1999 PLASTICS PIPING SYSTEMS FOR WATER SUPPLY - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) - PART 1: GENERAL
EN ISO 22007-3:2012 Plastics - Determination of thermal conductivity and thermal diffusivity - Part 3: Temperature wave analysis method (ISO 22007-3:2008)
EN 16153:2013+A1:2015 Light transmitting flat multiwall polycarbonate (PC) sheets for internal and external use in roofs, walls and ceilings - Requirements and test methods
EN ISO 16014-5:2012 Plastics - Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography - Part 5: Method using light-scattering detection (ISO 16014-5:2012)
EN 13280:2001 Specification for glass fibre reinforced cisterns of one piece and sectional construction, for the storage, above ground, of cold water
EN 13677-3:2003 Reinforced thermoplastic moulding compounds - Specification for GMT - Part 3: Specific requirements
EN ISO 22007-6:2015 Plastics - Determination of thermal conductivity and thermal diffusivity - Part 6: Comparative method for low thermal conductivities using a temperature-modulation technique (ISO 22007-6:2014)
EN ISO 15875-1:2003/A1:2007 Plastics piping systems for hot and cold water installations - Crosslinked polyethylene (PE-X) - Part 1: General - Amendment 1 (ISO 15875-1:2003/Amd 1:2007)
EN 13677-2:2003 Reinforced thermoplastic moulding compounds - Specification for GMT - Part 2: Methods of test and general requirements
EN ISO 2078:1994/A1:2015 TEXTILE GLASS - YARNS - DESIGNATION (ISO 2078:1993/AMD 1:2015)
EN ISO 1874-2:2012 Plastics - Polyamide (PA) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 1874-2:2012)
EN ISO 14529-2 : 1999 PLASTICS - MELAMINE/PHENOLIC POWDER MOULDING COMPOUNDS (MP-PMCS) - PART 2 - PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
EN ISO 1452-1:2009 Plastics piping systems for water supply and for buried and above-ground drainage and sewerage under pressure - Unplasticized poly(vinyl chloride) (PVC-U) - Part 1: General (ISO 1452-1:2009)
EN ISO 11409 : 1998 PLASTICS - PHENOLIC RESINS - DETERMINATION OF HEATS AND TEMPERATURES OF REACTION BY DIFFERENTIAL SCANNING CALORIMETRY
EN 15347:2007 Plastics - Recycled Plastics - Characterisation of plastics wastes
EN ISO 2535 : 2002 PLASTICS - UNSATURATED POLYESTER RESINS - MEASUREMENT OF GEL TIME AT AMBIENT TEMPERATURE (ISO 2535:2001)
EN ISO 10724-1 : 2001 PLASTICS - INJECTION MOULDING OF TEST SPECIMENS OF THERMOSETTING POWDER MOULDING COMPOUNDS (PMCS) - PART 1: GENERAL PRINCIPLES AND MOULDING OF MULTIPURPOSE TEST SPECIMENS
EN ISO 12086-2:2006/AC:2009 PLASTICS - FLUOROPOLYMER DISPERSIONS AND MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
EN 15343:2007 Plastics - Recycled Plastics - Plastics recycling traceability and assessment of conformity and recycled content
EN ISO 21003-1:2008 Multilayer piping systems for hot and cold water installations inside buildings - Part 1: General (ISO 21003-1:2008)
EN ISO 8062-1 : 2007 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL AND GEOMETRICAL TOLERANCES FOR MOULDED PARTS - PART 1: VOCABULARY
UNI EN ISO 11339 : 2010 ADHESIVES - T-PEEL TEST FOR FLEXIBLE-TO- FLEXIBLE BONDED ASSEMBLIES
EN ISO 15023-1:2017 Plastics - Poly(vinyl alcohol) (PVAL) materials - Part 1: Designation system and basis for specifications (ISO 15023-1:2017)
EN ISO 9163:2005 Textile glass - Rovings - Manufacture of test specimens and determination of tensile strength of impregnated rovings (ISO 9163:2005)
EN ISO 14526-3 : 1999 PLASTICS - PHENOLIC POWDER MOULDING COMPOUNDS (PF-PMCS) - PART 3: REQUIREMENTS FOR SELECTED MOULDING COMPOUNDS
EN ISO 10082 : 1999 PLASTICS - PHENOLIC RESINS - CLASSIFICATION AND TEST METHODS
EN ISO 10931:2005/A1:2015 Plastics piping systems for industrial applications - Poly(vinylidene fluoride) (PVDF) - Specifications for components and the system (ISO 10931:2005/FDAM 1:2015)
EN 397:2012+A1:2012 Industrial safety helmets
EN 14020-2:2002 Reinforcements - Specification for textile glass rovings - Part 2: Methods of test and general requirements
EN 12006-2:1998+A1:2009 Non active surgical implants - Particular requirements for cardiac and vascular implants - Part 2: Vascular prostheses including cardiac valve conduits
EN 1401-1:2009 Plastics piping systems for non-pressure underground drainage and sewerage - Unplasticized poly(vinyl chloride) (PVC-U) - Part 1: Specifications for pipes, fittings and the system
EN ISO 16396-2:2017 Plastics - Polyamide (PA) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 16396-2:2017)
EN ISO 10724-2 : 2000 PLASTICS - INJECTION MOULDING OF TEST SPECIMENS OF THERMOSETTING POWDER MOULDING COMPOUNDS (PMCS) - PART 2: SMALL PLATES
EN 15345:2007 Plastics - Recycled Plastics - Characterisation of Polypropylene (PP) recyclates
EN 13706-2:2002 Reinforced plastics composites - Specifications for pultruded profiles - Part 2: Methods of test and general requirements
EN ISO 12114 : 1997 FIBRE-REINFORCED PLASTICS - THERMOSETTING MOULDING COMPOUNDS AND PREPREGS - DETERMINATION OF CURE CHARACTERISTICS (ISO 12114:1997)
EN ISO 877-1:2010 Plastics - Methods of exposure to solar radiation - Part 1: General guidance (ISO 877-1:2009)
EN ISO 11358-1:2014 Plastics - Thermogravimetry (TG) of polymers - Part 1: General principles (ISO 11358-1:2014)
EN ISO 11401 : 1998 PLASTICS - PHENOLIC RESINS - SEPARATION BY LIQUID CHROMATOGRAPHY
EN ISO 1172:1998 Textile-glass-reinforced plastics - Prepregs, moulding compounds and laminates - Determination of the textile-glass and mineral-filler content - Calcination methods (ISO 1172:1996)
EN ISO 11469:2016 Plastics - Generic identification and marking of plastics products (ISO 11469:2016)
EN ISO 14530-2 : 1999 PLASTICS - UNSATURATED-POLYESTER POWDER MOULDING COMPOUNDS (UP-PMCS) - PART 2 - PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
EN ISO 11339:2010 Adhesives - T-peel test for flexible-to-flexible bonded assemblies (ISO 11339:2010)
I.S. EN ISO 10365:1996 ADHESIVES - DESIGNATION OF MAIN FAILURE PATTERNS
EN ISO 604 : 2003 PLASTICS - DETERMINATION OF COMPRESSIVE PROPERTIES (ISO 604:2002)
EN 15870:2009 Adhesives - Determination of tensile strength of butt joints (ISO 6922:1987 modified)
EN ISO 12115 : 1997 FIBRE-REINFORCED PLASTICS - THERMOSETTING MOULDING COMPOUNDS AND PREPREGS - DETERMINATION OF FLOWABILITY, MATURATION AND SHELF LIFE
EN ISO 14528-3 : 1999 PLASTICS - MELAMINE-FORMALDEHYDE POWDER MOULDING COMPOUNDS (MF-PMCS) - PART 3 - REQUIREMENTS FOR SELECTED MOULDING COMPOUNDS
EN 15348:2014 Plastics - Recycled plastics - Characterization of poly(ethylene terephthalate) (PET) recyclates
EN 14052:2012+A1:2012 High performance industrial helmets
EN ISO 11667 : 1999 FIBRE-REINFORCED PLASTICS - MOULDING COMPOUNDS AND PREPREGS - DETERMINATION OF RESIN, REINFORCED-FIBRE AND MINERAL-FILLER CONTENT - DISSOLUTION METHODS
EN 16575:2014 Bio-based products - Vocabulary
EN 14020-1:2002 Reinforcements - Specification for textile glass rovings - Part 1: Designation
EN ISO 20568-2:2017 Plastics - Fluoropolymer dispersions and moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 20568-2:2017)
EN ISO 306:2013 Plastics - Thermoplastic materials - Determination of Vicat softening temperature (VST) (ISO 306:2013)
EN 1842:1997 Plastics - Thermoset moulding compounds (SMC - BMC) - Determination of compression moulding shrinkage
EN 13706-1:2002 Reinforced plastics composites - Specifications for pultruded profiles - Part 1: Designation
EN ISO 14528-2 : 1999 PLASTICS - MELAMINE/PHENOLIC POWDER MOULDING COMPOUNDS (MP-PMCS) - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
EN ISO 20568-1:2017 Plastics - Fluoropolymer dispersions and moulding and extrusion materials - Part 1: Designation system and basis for specifications (ISO 20568-1:2017)
EN ISO 8257-1:2006 Plastics - Poly(methyl methacrylate) (PMMA) moulding and extrusion materials - Part 1: Designation system and basis for specifications (ISO 8257-1:1998)
EN ISO 22391-1:2009 Plastics piping systems for hot and cold water installations - Polyethylene of raised temperature resistance (PE-RT) - Part 1: General (ISO 22391-1:2009)
EN ISO 15252-3 : 1999 PLASTICS - EPOXY POWDER MOULDING COMPOUNDS (EP-PMCS) - PART 3: REQUIREMENTS FOR SELECTED MOULDING COMPOUNDS
EN ISO 15493:2003/A1:2017 Plastics piping systems for industrial applications - Acrylonitrile-butadiene-styrene (ABS), unplasticized poly(vinyl chloride) (PVC-U) and chlorinated poly(vinyl chloride) (PVC-C) - Specifications for components and the system - Metric series - Amendment 1 (ISO 15493:2003/Amd 1:2016 + Cor 1:2004)
EN ISO 11337:2010 Plastics - Polyamides - Determination of e-caprolactam and w-laurolactam by gas chromatography (ISO 11337:2010)
EN ISO 14528-1 : 1999 PLASTICS - MELAMINE-FORMALDEHYDE POWDER MOULDING COMPOUNDS (MF-PMCS) - PART 1: DESIGNATION SYSTEM AND BASIS FOR SPECIFICATIONS
EN ISO 14529-1 : 1999 PLASTICS - MELAMINE/PHENOLIC POWDER MOULDING COMPOUNDS (MP-PMCS) - PART 1 - DESIGNATION SYSTEM AND BASIS FOR SPECIFICATIONS
EN 14118-2:2003 Reinforcement - Specifications for textile glass mats (chopped strand and continuous filament mats) - Part 2: Methods of test and general requirements
EN 14758-1:2012 Plastics piping systems for non-pressure underground drainage and sewerage - Polypropylene with mineral modifiers (PP-MD) - Part 1: Specifications for pipes, fittings and the system
EN ISO 6401:2008 Plastics - Poly(vinyl chloride) - Determination of residual vinyl chloride monomer - Gas-chromatographic method (ISO 6401:2008)
EN ISO 308 : 1997 PLASTICS - PHENOLIC MOULDING MATERIALS - DETERMINATION OF ACETONE-SOLUBLE MATTER (APPARENT RESIN CONTENT OF MATERIAL IN THE UNMOULDED STATE)
EN ISO 25762:2012 Plastics - Guidance on the assessment of the fire characteristics and fire performance of fibre-reinforced polymer composites (ISO 25762:2009)
EN ISO 14526-1 : 1999 PLASTICS - PHENOLIC POWDER MOULDING COMPOUNDS (PF/PMCS) - PART 1: DESIGNATION SYSTEM AND BASIS FOR SPECIFICATIONS
EN ISO 16664:2017 Gas analysis - Handling of calibration gases and gas mixtures - Guidelines (ISO 16664:2017)
EN 15701:2016 (edition 2) Plastics - Thermoplastic jackets for insulation products for building equipment and industrial installations - Requirements and test methods
EN ISO 16396-1:2015 Plastics - Polyamide (PA) moulding and extrusion materials - Part 1: Designation system, marking of products and basis for specifications (ISO 16396-1:2015)
EN 14598-1:2005 Reinforced thermosetting moulding compounds - Specification for Sheet Moulding Compound (SMC) and Bulk Moulding Compound (BMC) - Part 1: Designation
EN ISO 11357-7:2015 Plastics - Differential scanning calorimetry (DSC) - Part 7: Determination of crystallization kinetics (ISO 11357-7:2015)
EN ISO 295 : 2004 PLASTICS - COMPRESSION MOULDING OF TEST SPECIMENS OF THERMOSETTING MATERIALS
EN ISO 14530-3 : 1999 PLASTICS - UNSATURATED-POLYESTER POWDER MOULDING COMPOUNDS (UP-PMCS) - PART 3: REQUIREMENTS FOR SELECTED MOULDING COMPOUNDS
EN ISO 11357-1:2016 Plastics - Differential scanning calorimetry (DSC) - Part 1: General principles (ISO 11357-1:2016)
EN ISO 1043-3 : 1999 PLASTICS - SYMBOLS AND ABBREVIATED TERMS - PART 3: PLASTICIZERS (ISO 1043-3:2016)
EN ISO 1133-2:2011 Plastics - Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics - Part 2: Method for materials sensitive to time-temperature history and/or moisture (ISO 1133-2:2011)
EN 13887:2003 Structural Adhesives - Guidelines for surface preparation of metals and plastics prior to adhesive bonding
EN ISO 14527-2 : 1999 PLASTICS - UREA-FORMALDEHYDE AND UREA/MELAMINE-FORMALDEHYDE POWDER MOULDING COMPOUNDS (UF- AND UF/MF-PMCS) - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
EN 15346:2014 Plastics - Recycled plastics - Characterization of poly(vinyl chloride) (PVC) recyclates
EN ISO 14530-1 : 1999 PLASTICS - UNSATURATED-POLYESTER POWDER MOULDING COMPOUNDS (UP-PMCS) - PART 1 - DESIGNATION SYSTEM AND BASIS FOR SPECIFICATIONS
DIN EN ISO 16396-1 E : 2015 PLASTICS - POLYAMIDE (PA) MOULDING AND EXTRUSION MATERIALS - PART 1: DESIGNATION SYSTEM, MARKING OF PRODUCTS AND BASIS FOR SPECIFICATIONS (ISO 16396-1:2015)
ISO 2561:2012 Plastics — Determination of residual styrene monomer in polystyrene (PS) and impact-resistant polystyrene (PS-I) by gas chromatography
I.S. EN 1852-1:2018 PLASTICS PIPING SYSTEMS FOR NON-PRESSURE UNDERGROUND DRAINAGE AND SEWERAGE - POLYPROPYLENE (PP) - PART 1: SPECIFICATIONS FOR PIPES, FITTINGS AND THE SYSTEM
DIN EN ISO 21003-1:2008-11 MULTILAYER PIPING SYSTEMS FOR HOT AND COLD WATER INSTALLATIONS INSIDE BUILDINGS - PART 1: GENERAL
BS EN ISO 11357-2:2014 Plastics. Differential scanning calorimetry (DSC) Determination of glass transition temperature and glass transition step height
UNE-EN ISO 16396-1:2015 Plastics - Polyamide (PA) moulding and extrusion materials - Part 1: Designation system, marking of products and basis for specifications (ISO 16396-1:2015)
17/30363924 DC : 0 BS EN 17176-1 - PLASTICS PIPING SYSTEMS FOR WATER SUPPLY AND FOR BURIED AND ABOVE GROUND DRAINAGE, SEWERAGE AND IRRIGATION UNDER PRESSURE - ORIENTED UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-O) - PART 1: GENERAL
PREN ISO 6721-1 : DRAFT 2011 PLASTICS - DETERMINATION OF DYNAMIC MECHANICAL PROPERTIES - PART 1: GENERAL PRINCIPLES
DIN EN 15870:2009-08 ADHESIVES - DETERMINATION OF TENSILE STRENGTH OF BUTT JOINTS
BS EN ISO 22007-3:2012 Plastics. Determination of thermal conductivity and thermal diffusivity Temperature wave analysis method
UNI EN ISO 22007-3 : 2012 PLASTICS - DETERMINATION OF THERMAL CONDUCTIVITY AND THERMAL DIFFUSIVITY - PART 3: TEMPERATURE WAVE ANALYSIS METHOD
ISO 23559:2007 Plastics Film and sheeting Guidance on the testing of thermoplastic films
06/30152065 DC : DRAFT JUNE 2006 BS EN ISO 6401 - PLASTICS - HOMOPOLYMER AND COPOLYMER RESINS OF VINYL CHLORIDE - DETERMINATION OF RESIDUAL VINYL CHLORIDE MONOMER - GAS CHROMATOGRAPHIC METHOD
ISO 17467-1:2012 Plastics piping systems for the supply of gaseous fuels Unplasticized polyamide (PA-U) piping systems jointed by solvent cement Part 1: General
13/30277400 DC : 0 BS EN 131-6 - LADDERS - PART 6: TELESCOPIC LADDERS
06/30130313 DC : DRAFT MAR 2006 ISO 23559 - PLASTICS - FILM AND SHEETING - GUIDE FOR THE TESTING OF THERMOPLASTIC FILMS
BS ISO 16365-2:2014 Plastics. Thermoplastic polyurethanes for moulding and extrusion Preparation of test specimens and determination of properties
17/30348286 DC : 0 BS EN 17098-1 - PLASTICS - BARRIER FILMS FOR AGRICULTURAL AND HORTICULTURAL SOIL DISINFECTION BY FUMIGATION - PART 1: SPECIFICATIONS FOR BARRIER FILMS
04/30091874 DC : DRAFT FEB 2004 BS EN ISO 13000-1 - PLASTICS - POLYTETRAFLUOROETHYLENE (PTFE) SEMI-FINISHED PRODUCTS - PART 1: REQUIREMENTS AND DESIGNATION
BS ISO 17467-1:2012 Plastics piping systems for the supply of gaseous fuels. Unplasticized polyamide (PA-U) piping systems jointed by solvent cement General
I.S. EN ISO 20568-1:2017&LC:2017 PLASTICS - FLUOROPOLYMER DISPERSIONS AND MOULDING AND EXTRUSION MATERIALS - PART 1: DESIGNATION SYSTEM AND BASIS FOR SPECIFICATIONS (ISO 20568-1:2017)
PREN 17176-1 : DRAFT 2017 PLASTICS PIPING SYSTEMS FOR WATER SUPPLY AND FOR BURIED AND ABOVE GROUND DRAINAGE, SEWERAGE AND IRRIGATION UNDER PRESSURE - ORIENTED UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-O) - PART 1: GENERAL
I.S. EN 15534-1:2014 COMPOSITES MADE FROM CELLULOSE-BASED MATERIALS AND THERMOPLASTICS (USUALLY CALLED WOOD-POLYMER COMPOSITES (WPC) OR NATURAL FIBRE COMPOSITES (NFC)) - PART 1: TEST METHODS FOR CHARACTERISATION OF COMPOUNDS AND PRODUCTS
BS ISO 4427-1 : 2007 PLASTICS PIPING SYSTEMS - POLYETHYLENE (PE) PIPES AND FITTINGS FOR WATER SUPPLY - PART 1: GENERAL
BS ISO 30012 : 2016 CARBON-FIBRE-REINFORCED PLASTICS - DETERMINATION OF THE SIZE AND ASPECT RATIO OF CRUSHED OBJECTS
BS ISO 18437-4:2008 Mechanical vibration and shock. Characterization of the dynamic mechanical properties of visco-elastic materials Dynamic stiffness method
UNE-EN ISO 20568-2:2017 Plastics - Fluoropolymer dispersions and moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 20568-2:2017)
99/201503 DC : 0 IEC 61479 ED.1 - LIVE WORKING - CONDUCTOR COVERS (LINE HOSES) OR INSULATING MATERIAL FOR ELECTRICAL PURPOSES
DIN EN ISO 20568-1 E : 2017 PLASTICS - FLUOROPOLYMER DISPERSIONS AND MOULDING AND EXTRUSION MATERIALS - PART 1: DESIGNATION SYSTEM AND BASIS FOR SPECIFICATIONS (ISO 20568-1:2017)
I.S. EN 14409-1:2004 PLASTICS PIPING SYSTEMS FOR RENOVATION OF UNDERGROUND WATER SUPPLY NETWORKS - PART 1: GENERAL
16/30336081 DC : 0 BS EN ISO 16664 - GAS ANALYSIS - HANDLING OF CALIBRATION GASES AND GAS MIXTURES - GUIDELINES
08/30182090 DC : DRAFT MAY 2008 BS EN ISO 11357-1 - PLASTICS - DIFFERENTIAL SCANNING CALORIMETRY (DSC) - PART 1: GENERAL PRINCIPLES
BS 7297-2:1990 Haemodialysers and related equipment Specification for extracorporeal circuits for use with haemodialysers, haemofilters and haemoconcentrators
05/30130982 DC : DRAFT MAR 2005 ISO 15033 - PLASTICS - DETERMINATION OF CAPROLACTAM AND ITS CYCLIC AND LINEAR OLIGOMERS BY HPLC
16/30314675 DC : 0 BS ISO 19469-1 - PLASTIC PIPING SYSTEMS FOR NON PRESSURE UNDERGROUND DRAINAGE - SINGLE WALL CORRUGATED PIPING SYSTEMS OF POLYETHYLENE (PE), POLYPROPYLENE (PP) AND UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) - PART 1: GENERAL REQUIREMENTS AND PERFORMANCE CHARACTERISTICS
NF EN ISO 22391-1 : 2010 PLASTICS PIPING SYSTEMS FOR HOT AND COLD WATER INSTALLATIONS - POLYETHYLENE OF RAISED TEMPERATURE RESISTANCE (PE-RT) - PART 1: GENERAL
ONORM EN ISO 1183-1 : 2013 PLASTICS - METHODS FOR DETERMINING THE DENSITY OF NON-CELLULAR PLASTICS - PART 1: IMMERSION METHOD, LIQUID PYKNOMETER METHOD AND TITRATION METHOD (ISO 1183-1:2012)
UNE-EN 15346:2015 Plastics - Recycled plastics - Characterization of poly(vinyl chloride) (PVC) recyclates
BS ISO 16525-6:2014 Adhesives. Test methods for isotropic electrically conductive adhesives Determination of pendulum-type shear impact
10/30196247 DC : 0 BS ISO 12418-2 - PLASTICS - POST-CONSUMER POLY(ETHYLENE TEREPHTHALATE) (PET) BOTTLE REYCLATES - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
DIN EN ISO 11357-3 E : 2013 PLASTICS - DIFFERENTIAL SCANNING CALORIMETRY (DSC) - PART 3: DETERMINATION OF TEMPERATURE AND ENTHALPY OF MELTING AND CRYSTALLIZATION (ISO 11357-3:2011)
BS ISO 12817:2013 Fibre-reinforced plastic composites. Determination of open-hole compression strength
08/30154274 DC : DRAFT MAR 2008 BS ISO 25762 - PLASTICS - GUIDANCE ON THE ASSESSMENT OF FIRE CHARACTERISTICS AND FIRE PERFORMANCE OF FIBRE-REINFORCED COMPOSITES
BS ISO 13636:2012 Plastics. Film and sheeting. Non-oriented poly(ethylene terephthalate) (PET) sheets
BS ISO 16365-1:2014 Plastics. Thermoplastic polyurethanes for moulding and extrusion Designation system and basis for specifications
05/30111233 DC : 0 BS EN 13245-2 - PLASTICS - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) PROFILES FOR BUILDING APPLICATIONS - PART 2: PROFILES FOR INTERNAL AND EXTERNAL WALL AND CEILING FINISHES
ISO 15034:1999 Composites Prepregs Determination of resin flow
DIN EN 16575:2014-10 BIO-BASED PRODUCTS - VOCABULARY
BS EN 15534-1 : 2014 COMPOSITES MADE FROM CELLULOSE-BASED MATERIALS AND THERMOPLASTICS (USUALLY CALLED WOOD-POLYMER COMPOSITES (WPC) OR NATURAL FIBRE COMPOSITES (NFC)) - PART 1: TEST METHODS FOR CHARACTERISATION OF COMPOUNDS AND PRODUCTS
CEI EN 62011-1 : 2003 INSULATING MATERIALS - INDUSTRIAL, RIGID, MOULDED, LAMINATED TUBES AND RODS OF RECTANGULAR AND HEXAGONAL CROSS-SECTION BASED UPON THERMOSETTING RESINS FOR ELECTRICAL PURPOSES - PART 1: DEFINITIONS, DESIGNATIONS AND GENERAL REQUIREMENTS
BS ISO 16525-8:2014 Adhesives. Test methods for isotropic electrically conductive adhesives Electrochemical-migration test methods
BS ISO 1172 : 96 AMD 10350 TEXTILE-GLASS-REINFORCED PLASTICS - PREPREGS, MOULDING COMPOUNDS AND LAMINATES - DETERMINATION OF THE TEXTILE-GLASS AND MINERAL-FILLER CONTENT - CALCINATION METHODS
13/30276237 DC : 0 BS EN 15348 - PLASTICS - RECYCLED PLASTICS - CHARACTERISATION OF POLY(ETHYLENE TEREPHTHALATE) (PET) RECYCLATES
11/30196210 DC : 0 BS ISO 12815 - FIBRE-REINFORCED PLASTIC COMPOSITES - DETERMINATION OF PLAIN-PIN BEARING STRENGTH
BS ISO 18437-1:2012 Mechanical vibration and shock. Characterization of the dynamic mechanical properties of visco-elastic materials Principles and guidelines
I.S. EN 12575:1998 PLASTICS - THERMOSET MOULDING COMPOUNDS - DETERMINATION OF THE DEGREE OF FIBRE WET OUT IN SMC
DIN EN 15348 E : 2015 PLASTICS - RECYCLED PLASTICS - CHARACTERIZATION OF POLY(ETHYLENE TEREPHTHALATE) (PET) RECYCLATES
ISO 24538:2008 Plastics Homopolymer and copolymer resins of vinyl chloride Determination of residual vinyl chloride monomer by gas-chromatographic analysis of dry powder
BS EN ISO 15750-3:2008 Packaging. Steel drums Inserted flange-type closure systems
00/203243 DC : 0 IEC 60743. ED. 2 - LIVE WORKING - TERMINOLOGY FOR TOOLS, EQUIPMENT AND DEVICES
I.S. EN 16153:2013 LIGHT TRANSMITTING FLAT MULTIWALL POLYCARBONATE (PC) SHEETS FOR INTERNAL AND EXTERNAL USE IN ROOFS, WALLS AND CEILINGS - REQUIREMENTS AND TEST METHODS
S.R. CEN ISO/TR 27165:2012 THERMOPLASTICS PIPING SYSTEMS - GUIDANCE FOR DEFINITIONS OF WALL CONSTRUCTIONS FOR PIPES (ISO/TR 27165:2012)
PD CEN ISO/TR 27165:2012 Thermoplastics piping systems. Guidance for definitions of wall constructions for pipes
DIN EN ISO 20568-1:2015-07 (Draft) PLASTICS - FLUOROPOLYMER DISPERSIONS AND MOULDING AND EXTRUSION MATERIALS - PART 1: DESIGNATION SYSTEM AND BASIS FOR SPECIFICATIONS (ISO 20568-1:2017)
NF EN 61479 : 2001 AMD 1 2003 LIVE WORKING - FLEXIBLE CONDUCTOR COVERS (LINE HOSES) OF INSULATING MATERIAL
00/105249 DC : DRAFT JULY 2000 PREN 13956 - FLEXIBLE SHEETS FOR WATERPROOFING - PLASTIC AND RUBBER SHEETS FOR ROOF WATERPROOFING - DEFINITIONS AND CHARACTERISTICS
NF EN 60455-1 : 1999 RESIN BASED REACTIVE COMPOUNDS USED FOR ELECTRICAL INSULATION - DEFINITIONS AND GENERAL REQUIREMENTS
NF EN ISO 1043-1 : 2012 AMD 1 2016 PLASTICS - SYMBOLS AND ABBREVIATED TERMS - PART 1: BASIC POLYMERS AND THEIR SPECIAL CHARACTERISTICS
I.S. EN 15344:2007 PLASTICS - RECYCLED PLASTICS - CHARACTERISATION OF POLYETHYLENE (PE) RECYCLATES
UNE-EN ISO 11357-3:2013 Plastics - Differential scanning calorimetry (DSC) - Part 3: Determination of temperature and enthalpy of melting and crystallization (ISO 11357-3:2011)
11/30240212 DC : 0 BS EN ISO 8330 - RUBBER AND PLASTICS HOSES AND HOSE ASSEMBLIES - VOCABULARY
UNI EN ISO 3451-1 : 2009 PLASTICS - DETERMINATION OF ASH - PART 1: GENERAL METHODS
BS ISO 12086-1 : 1995 AMD 10638 PLASTICS - FLUOROPOLYMER DISPERSIONS AND MOULDING AND EXTRUSION MATERIALS - DESIGNATION SYSTEM AND BASIS FOR SPECIFICATIONS
BS ISO 12013-2:2012 Paints and varnishes. Determination of curing characteristics using a free damped oscillation method Glass transition temperature
ISO/TR 13014:2012 Nanotechnologies Guidance on physico-chemical characterization of engineered nanoscale materials for toxicologic assessment
BS EN ISO 15494:2015 Plastics piping systems for industrial applications. Polybutene (PB), polyethylene (PE), polyethylene of raised temperature resistance (PE-RT), crosslinked polyethylene (PE-X), polypropylene (PP). Metric series for specifications for components and the system
ISO 19212:2006 Adhesives Determination of temperature dependence of shear strength
08/30189974 DC : DRAFT DEC 2008 BS EN 13245-1 - PLASTICS - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) PROFILES FOR BUILDING APPLICATIONS - PART 1: DESIGNATION OF PVC-U PROFILES
NF EN 60464-1 : 1999 AMD 1 2006 VARNISHES USED FOR ELECTRICAL INSULATION - PART 1: DEFINITIONS AND GENERAL REQUIREMENTS
07/30127284 DC : 0 BS EN ISO 4892-1 - PLASTICS - METHODS OF EXPOSURE TO LABORATORY LIGHT SOURCES - PART 1: GENERAL GUIDANCE
14/30318870 DC : 0 BS PD CEN/TS 16861 - PLASTICS - RECYCLED PLASTICS - DETERMINATION OF SELECTED MARKER COMPOUNDS IN FOOD GRADE RECYCLED POLYETHYLENE TEREPHTHALATE (PET)
BS EN ISO 20568-2:2017 Plastics. Fluoropolymer dispersions and moulding and extrusion materials Preparation of test specimens and determination of properties
BS ISO 1268-8:2004 Fibre-reinforced plastics. Methods of producing test plates Compression moulding of SMC and BMC
15/30324130 DC : 0 BS EN ISO 15876-1 - PLASTICS PIPING SYSTEMS FOR HOT AND COLD WATER INSTALLATIONS - POLYBUTENE (PB) - PART 1: GENERAL
NF EN ISO 22007-3 : 2012 PLASTICS - DETERMINATION OF THERMAL CONDUCTIVITY AND THERMAL DIFFUSIVITY - PART 3: TEMPERATURE WAVE ANALYSIS METHOD
10/30228348 DC : 0 BS EN ISO 15874-1 - PLASTICS PIPING SYSTEMS FOR HOT AND COLD WATER INSTALLATIONS - POLYPROPYLENE (PP) - PART 1: GENERAL
BS IEC 61112:1992 Blankets of insulating material for electrical purposes
XP T51 224-1 : 1991 XP PLASTICS - DETERMINATION OF THE THERMAL STABILITY BY OVER DRYING (FLOATING PLATEN CHAMBER) - PART 1: GENERAL
BS ISO 11357-2 : 2013 PLASTICS - DIFFERENTIAL SCANNING CALORIMETRY (DSC) - PART 2: DETERMINATION OF GLASS TRANSITION TEMPERATURE AND GLASS TRANSITION STEP HEIGHT
PREN 15346 : DRAFT 2013 PLASTICS - RECYCLED PLASTICS - CHARACTERISATION OF POLY(VINYL CHLORIDE) (PVC) RECYCLATES
EN 1329-1:2014+A1:2018 Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Unplasticized poly(vinyl chloride) (PVC-U) - Part 1: Specifications for pipes, fittings and the systems
I.S. EN 13476-1:2007 PLASTICS PIPING SYSTEMS FOR NON-PRESSURE UNDERGROUND DRAINAGE AND SEWERAGE - STRUCTURED-WALL PIPING SYSTEMS OF UNPLASTICIZED POLY (VINYL CHLORIDE) (PVC-U), POLYPROPYLENE (PP) AND POLYETHYLENE (PE) - PART 1: GENERAL REQUIREMENTS AND PERFORMANCE CHARACTERISTICS
UNE-EN 13245-3:2011 Plastics - Unplasticized poly(vinyl chloride) (PVC-U) profiles for building applications - Part 3: Designation of PVC-UE profiles
04/30091870 DC : DRAFT FEB 2004 BS EN ISO 12086-2 - PLASTICS - FLUOROPOLYMER DISPERSIONS AND MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
05/19970897 DC : 0 BS ISO 4898 - RIGID CELLULAR PLASTICS - THERMAL INSULATION PRODUCTS FOR BUILDINGS - SPECIFICATIONS
UNI EN 1013 : 2015 LIGHT TRANSMITTING SINGLE SKIN PROFILED PLASTICS SHEETS FOR INTERNAL AND EXTERNAL ROOFS, WALLS AND CEILINGS - REQUIREMENTS AND TEST METHODS
I.S. EN ISO 15494:2015 PLASTICS PIPING SYSTEMS FOR INDUSTRIAL APPLICATIONS - POLYBUTENE (PB), POLYETHYLENE (PE), POLYETHYLENE OF RAISED TEMPERATURE RESISTANCE (PE-RT), CROSSLINKED POLYETHYLENE (PE-X), POLYPROPYLENE (PP) - METRIC SERIES FOR SPECIFICATIONS FOR COMPONENTS AND THE SYSTEM (ISO 15494:2015)
I.S. EN ISO 1043-1:2011 PLASTICS - SYMBOLS AND ABBREVIATED TERMS - PART 1: BASIC POLYMERS AND THEIR SPECIAL CHARACTERISTICS (ISO 1043-1:2011)
UNI EN ISO 15750-3 : 2008 PACKAGING - STEEL DRUMS - PART 3: INSERTED FLANGE-TYPE CLOSURE SYSTEMS
06/30146747 DC : DRAFT FEB 2006 ISO 22007-2 - PLASTICS - DETERMINATION OF THERMAL CONDUCTIVITY AND THERMAL DIFFUSIVITY - PART 2: TRANSIENT PLANE HEAT SOURCE (HOT DISK) METHOD
09/30192411 DC : 0 BS ISO 16014-2 - PLASTICS - DETERMINATION OF AVERAGE MOLECULAR MASS AND MOLECULAR MASS DISTRIBUTION OF POLYMERS USING SIZE-EXCLUSION CHROMATOGRAPHY - PART 2: UNIVERSAL CALIBRATION METHOD
SAE AMS 2950/1 : 2008 PASTE ADHESIVE FOR CORE RESTORATION - PART 1: GENERAL REQUIREMENTS
ISO 15494:2015 Plastics piping systems for industrial applications — Polybutene (PB), polyethylene (PE), polyethylene of raised temperature resistance (PE-RT), crosslinked polyethylene (PE-X), polypropylene (PP) — Metric series for specifications for components and the system
DIN 7724:1993-04 POLYMERIC MATERIALS; GROUPING OF POLYMERIC MATERIALS BASED ON THEIR MECHANICAL BEHAVIOUR
UNI EN ISO 22391-1 : 2010 PLASTICS PIPING SYSTEMS FOR HOT AND COLD WATER INSTALLATIONS - POLYETHYLENE OF RAISED TEMPERATURE RESISTANCE (PE-RT) - PART 1: GENERAL
DIN EN ISO 22391-1:2010-04 Plastics piping systems for hot and cold water installations - Polyethylene of raised temperature resistance (PE-RT) - Part 1: General (ISO 22391-1:2009)
UNI EN ISO 11357-2 : 2014 PLASTICS - DIFFERENTIAL SCANNING CALORIMETRY (DSC) - PART 2: DETERMINATION OF GLASS TRANSITION TEMPERATURE AND GLASS TRANSITION STEP HEIGHT
UNI EN ISO 1133-2 : 2012 PLASTICS - DETERMINATION OF THE MELT MASS-FLOW RATE (MFR) AND MELT VOLUME-FLOW RATE (MVR) OF THERMOPLASTICS - PART 2: METHOD FOR MATERIALS SENSITIVE TO TIME-TEMPERATURE HISTORY AND/OR MOISTURE
I.S. EN 15348:2014 PLASTICS - RECYCLED PLASTICS - CHARACTERIZATION OF POLY(ETHYLENE TEREPHTHALATE) (PET) RECYCLATES
ISO 20819:2018 Plastics Wood-plastic recycled composites (WPRC) Specification
ASTM D 4092 :2007 Standard Terminology: Plastics: Dynamic Mechanical Properties
EN ISO 3451-1:2008 Plastics - Determination of ash - Part 1: General methods (ISO 3451-1:2008)
UNE-ISO 1268-10:2012 Fibre-reinforced plastics. Methods of producing test plates. Part 10: Injection moulding of BMC and other long-fibre moulding compounds. General principles and moulding of multipurpose test specimens
I.S. EN ISO 6721-1:2011 PLASTICS - DETERMINATION OF DYNAMIC MECHANICAL PROPERTIES - PART 1: GENERAL PRINCIPLES
I.S. EN ISO 22391-1:2009 PLASTICS PIPING SYSTEMS FOR HOT AND COLD WATER INSTALLATIONS - POLYETHYLENE OF RAISED TEMPERATURE RESISTANCE (PE-RT) - PART 1: GENERAL
NFL 17 021 : 98 PR AEROSPACE SERIES - NON-METALLIC MATERIALS - RESINS, ADHESIVES, REINFORCED PLASTICS, PREIMPREGNATES - CHARACTERISATION BY LIQUID CHROMATOGRAPHY
I.S. EN 62011-1:2002 INSULATING MATERIALS - INDUSTRIAL, RIGID, MOULDED, LAMINATED TUBES AND RODS OF RECTANGULAR AND HEXAGONAL CROSS-SECTION BASED ON THERMOSETTING RESINS FOR ELECTRICAL PURPOSES - PART 1: DEFINITIONS, DESIGNATIONS AND GENERAL REQUIREMENTS
S.R. CEN/TR 15353:2007 PLASTICS - RECYCLED PLASTICS - GUIDELINES FOR THE DEVELOPMENT OF STANDARDS FOR RECYCLED PLASTICS
ISO 16620-1:2015 Plastics Biobased content Part 1: General principles
ISO 15874-1:2013 Plastics piping systems for hot and cold water installations — Polypropylene (PP) — Part 1: General
I.S. EN ISO 16396-1:2015 PLASTICS - POLYAMIDE (PA) MOULDING AND EXTRUSION MATERIALS - PART 1: DESIGNATION SYSTEM, MARKING OF PRODUCTS AND BASIS FOR SPECIFICATIONS (ISO 16396-1:2015)
ISO 1043-1:2011 Plastics — Symbols and abbreviated terms — Part 1: Basic polymers and their special characteristics
ISO 30012:2016 Carbon-fibre-reinforced plastics Determination of the size and aspect ratio of crushed objects
ISO 18437-4:2008 Mechanical vibration and shock — Characterization of the dynamic mechanical properties of visco-elastic materials — Part 4: Dynamic stiffness method
SAE AMS 2950/1 : 2008(R2019) PASTE ADHESIVE FOR CORE RESTORATION - PART 1: GENERAL REQUIREMENTS
17/30363915 DC : 0 BS EN 131-6 - LADDERS - PART 6: TELESCOPIC LADDERS
UNE-EN ISO 1183-1:2013 Plastics - Methods for determining the density of non-cellular plastics - Part 1: Immersion method, liquid pyknometer method and titration method (ISO 1183-1:2012)
BIS IS 13774 : 2014 LIVE WORKING - GLOVES OF INSULATING MATERIAL
EN ISO 178:2010/A1:2013 PLASTICS - DETERMINATION OF FLEXURAL PROPERTIES (ISO 178:2010/AMD 1:2013)
EN ISO 13000-2:2005 Plastics - Polytetrafluoroethylene (PTFE) semi-finished products - Part 2: Preparation of test specimens and determination of properties (ISO 13000-2:2005)
ISO 1452-1:2009 Plastics piping systems for water supply and for buried and above-ground drainage and sewerage under pressure Unplasticized poly(vinyl chloride) (PVC-U) Part 1: General
ISO 17422:2002 Plastics Environmental aspects General guidelines for their inclusion in standards
ISO 16014-1:2012 Plastics Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography Part 1: General principles
ISO 16525-8:2014 Adhesives Test methods for isotropic electrically conductive adhesives Part 8: Electrochemical-migration test methods
I.S. EN ISO 15877-1:2009 PLASTICS PIPING SYSTEMS FOR HOT AND COLD WATER INSTALLATIONS - CHLORINATED POLY(VINYL CHLORIDE) (PVC-C) - PART 1: GENERAL
DIN EN 131-6 E : 2015 LADDERS - PART 6: TELESCOPIC LADDERS
I.S. EN 15857:2010 NON-DESTRUCTIVE TESTING - ACOUSTIC EMISSION - TESTING OF FIBRE-REINFORCED POLYMERS - SPECIFIC METHODOLOGY AND GENERAL EVALUATION CRITERIA
ISO 1268-8:2004 Fibre-reinforced plastics — Methods of producing test plates — Part 8: Compression moulding of SMC and BMC
I.S. EN ISO 15874-1:2013 PLASTICS PIPING SYSTEMS FOR HOT AND COLD WATER INSTALLATIONS - POLYPROPYLENE (PP) - PART 1: GENERAL (ISO 15874-1:2013)
I.S. EN ISO 16664:2017 GAS ANALYSIS - HANDLING OF CALIBRATION GASES AND GAS MIXTURES - GUIDELINES (ISO 16664:2017)
ISO 18437-1:2012 Mechanical vibration and shock — Characterization of the dynamic mechanical properties of visco-elastic materials — Part 1: Principles and guidelines
ISO 19095-4:2015 Plastics Evaluation of the adhesion interface performance in plastic-metal assemblies Part 4: Environmental conditions for durability
ISO 16525-1:2014 Adhesives Test methods for isotropic electrically conductive adhesives Part 1: General test methods
BS EN ISO 1043-1:2011 PLASTICS - SYMBOLS AND ABBREVIATED TERMS - PART 1: BASIC POLYMERS AND THEIR SPECIAL CHARACTERISTICS (ISO 1043-1:2011)
DIN EN 12006-2:2009-08 NON ACTIVE SURGICAL IMPLANTS - PARTICULAR REQUIREMENTS FOR CARDIAC AND VASCULAR IMPLANTS - PART 2: VASCULAR PROSTHESES INCLUDING CARDIAC VALVE CONDUITS
DIN EN ISO 10931:2015-11 PLASTICS PIPING SYSTEMS FOR INDUSTRIAL APPLICATIONS - POLY(VINYLIDENE FLUORIDE) (PVDF) - SPECIFICATIONS FOR COMPONENTS AND THE SYSTEM (ISO 10931:2005 + AMD 1:2015)
DIN EN ISO 1172:1998-12 Textile glass-reinforced plastics - Prepregs, moulding compounds and laminates - Determination of the textile-glass and mineral-filler content - Calcination methods (ISO 1172:1996)
DIN EN 1401-1:2009-07 PLASTICS PIPING SYSTEMS FOR NON-PRESSURE UNDERGROUND DRAINAGE AND SEWERAGE - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) - PART 1: SPECIFICATIONS FOR PIPES, FITTINGS AND THE SYSTEM
DIN EN 12200-1:2016-10 PLASTICS RAINWATER PIPING SYSTEMS FOR ABOVE GROUND EXTERNAL USE - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) - PART 1: SPECIFICATIONS FOR PIPES, FITTINGS AND THE SYSTEM
BS EN 12654-3:1999 Textile glass. Yarns General requirements for general applications
BS EN 13002-2:1999 Carbon fibre yarns Test methods and general specifications
UNE-EN 13245-1:2011 Plastics - Unplasticized poly(vinyl chloride) (PVC-U) profiles for building applications - Part 1: Designation of PVC-U profiles
ISO 6401:2008 Plastics — Poly(vinyl chloride) — Determination of residual vinyl chloride monomer — Gas-chromatographic method
BS EN 13887:2003 Structural adhesives. Guidelines for surface preparation of metals and plastics prior to adhesive bonding
ISO 11339:2010 Adhesives T-peel test for flexible-to-flexible bonded assemblies
BS EN 61212-3-2:2013 Insulating materials. Industrial rigid round laminated tubes and rods based on thermosetting resins for electrical purposes Specifications for individual materials. Sheet 2: Round laminated moulded tubes
BS EN ISO 14529-1:2000 Plastics. Melamine/phenolic powder moulding compounds (MP-PMCs) Designation system and basis for specifications
BS EN 1452-1 : 2000 PLASTICS PIPING SYSTEMS FOR WATER SUPPLY - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) - PART 1: GENERAL
BS EN ISO 10365:1995 Adhesives. Designation of main failure patterns
BS EN ISO 10931 : 2005 PLASTICS PIPING SYSTEMS FOR INDUSTRIAL APPLICATIONS - POLY(VINYLIDENE FLUORIDE) (PVDF) - SPECIFICATIONS FOR COMPONENTS AND THE SYSTEM
ISO 11357-7:2015 Plastics Differential scanning calorimetry (DSC) Part 7: Determination of crystallization kinetics
BS EN 15343:2007 Plastics. Recycled plastics. Plastics recycling traceability and assessment of conformity and recycled content
I.S. EN 1401-1:2009 PLASTICS PIPING SYSTEMS FOR NON-PRESSURE UNDERGROUND DRAINAGE AND SEWERAGE - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) - PART 1: SPECIFICATIONS FOR PIPES, FITTINGS AND THE SYSTEM
BS EN 60893-1:2004 Insulating materials. Industrial rigid laminated sheets based on thermosetting resins for electrical purposes Definitions, designations and general requirements
ISO 15252-2:1999 Plastics Epoxy powder moulding compounds (EP-PMCs) Part 2: Preparation of test specimens and determination of properties
UNE-EN 12201-1:2012 Plastics piping systems for water supply, and for drainage and sewerage under pressure - Polyethylene (PE) - Part 1: General
BS EN 14447:2005 Fibre reinforced plastics. Glass mat reinforced thermoplastics (GMT). Determination of flowability and solidification
BS EN 13706-1:2002 Reinforced plastics composites. Specifications for pultruded profiles Designation
BS EN ISO 12115:1997 Fibre-reinforced plastics. Thermosetting moulding compounds and prepregs. Determination of flowability, maturation and shelf life
BS EN ISO 15493 : 2003 PLASTICS PIPING SYSTEMS FOR INDUSTRIAL APPLICATIONS - ACRYLONITRILE-BUTADIENE-STYRENE (ABS), UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) AND CHLORINATED POLY(VINYL CHLORIDE) (PVC-C) - SPECIFICATIONS FOR COMPONENTS AND THE SYSTEM - METRIC SERIES (ISO 15493:2003)
BS EN 12575:1998 Plastics. Thermoset moulding compounds. Determination of the degree of fibre wet out in SMC
BS EN ISO 1043-3:2016 Plastics. Symbols and abbreviated terms Plasticizers
BS EN 13360:2002 Rubber- or plastics-coated fabrics. Terminology
BS EN 12971-1:1999 Reinforcements. Specification for textile glass chopped strands Designation
ISO 14527-2:1999 Plastics Urea-formaldehyde and urea/melamine-formaldehyde powder moulding compounds (UF- and UF/MF-PMCs) Part 2: Preparation of test specimens and determination of properties
UNE-EN ISO 15874-1:2013 Plastics piping systems for hot and cold water installations - Polypropylene (PP) - Part 1: General (ISO 15874-1:2013)
IEC 61111:2009 Live working - Electrical insulating matting
BS EN 61212-1:2006 Insulating materials. Industrial rigid round laminated tubes and rods based on thermosetting resins for electrical purposes Definitions, designations and general requirements
ISO 8257-1:1998 Plastics Poly(methyl methacrylate) (PMMA) moulding and extrusion materials Part 1: Designation system and basis for specifications
BS EN 15344:2007 Plastics. Recycled plastics. Characterization of polyethylene (PE) recyclates
BS EN ISO 11409:1998 Plastics. Phenolic resins. Determination of heats and temperatures of reaction by differential scanning calorimetry
ISO 11359-1:2014 Plastics — Thermomechanical analysis (TMA) — Part 1: General principles
BS EN 1565-1:2000 Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure. Styrene copolymer blends (SAN + PVC) Specifications for pipes, fittings and the system
BS EN 15346:2014 Plastics. Recycled plastics. Characterization of poly(vinyl chloride) (PVC) recyclates
IEC 61212-3-3:2006 Insulating materials - Industrial rigid round laminated tubes and rods based on thermosetting resins for electrical purposes - Part 3: Specifications for individual materials - Sheet 3: Round laminated moulded rods
ISO 10724-1:1998 Plastics — Injection moulding of test specimens of thermosetting powder moulding compounds (PMCs) — Part 1: General principles and moulding of multipurpose test specimens
BS EN ISO 11337:2010 Plastics. Polyamides. Determination of e-caprolactam and w-laurolactam by gas chromatography
03/314451 DC : DRAFT SEP 2003 IEC 62392 TR ED.1 - SUITABILITY OF TYPICAL ELECTRICAL INSULATING MATERIAL FOR POLYMER RECYCLING
BS EN ISO 10724-1:2001 Plastics. Injection moulding of test specimens of thermosetting powder moulding compounds (PMCs) General principles and moulding of multipurpose test specimens
BS EN 14598-1:2005 Reinforced thermosetting moulding compounds. Specification for sheet moulding compound (SMC) and bulk moulding compound (BMC) Designation
BS EN 12971-2:1999 Reinforcements. Specification for textile glass chopped strands Test methods and general requirements
BS EN ISO 14530-2:2000 Plastics. Unsaturated-polyester powder moulding compounds (UP-PMCs) Preparation of test specimens and determination of properties
BS EN ISO 15252-2:2000 Plastics. Epoxy powder moulding compounds (EP-PMCs) Preparation of test specimens and determination of properties
ISO 16664:2017 Gas analysis — Handling of calibration gases and gas mixtures — Guidelines
ISO 2078:1993 Textile glass Yarns Designation
ISO 14527-1:1999 Plastics Urea-formaldehyde and urea/melamine-formaldehyde powder moulding compounds (UF- and UF/MF-PMCs) Part 1: Designation system and basis for specifications
BS EN ISO 14530-1:2000 Plastics. Unsaturated-polyester powder moulding compounds (UP-PMCs) Designation system and basis for specifications
CEN ISO/TR 27165:2012 Thermoplastics piping systems - Guidance for definitions of wall constructions for pipes (ISO/TR 27165:2012)
EN 12200-1:2016 Plastics rainwater piping systems for above ground external use - Unplasticized poly(vinyl chloride) (PVC-U) - Part 1: Specifications for pipes, fittings and the system
ONORM EN ISO 13000-1 : 2006 PLASTICS - POLYTETRAFLUOROETHYLENE (PTFE) SEMI-FINISHED PRODUCTS - PART 1: REQUIREMENTS AND DESIGNATION
CEN ISO/TR 22007-5:2014 Plastics - Determination of thermal conductivity and thermal diffusivity - Part 5: Results of interlaboratory testing of poly(methyl methacrylate) samples (ISO/TR 22007-5:2011)
CEN/TS 16011:2013 Plastics - Recycled plastics - Sample preparation
EN ISO 15605:2004 Adhesives - Sampling (ISO 15605:2000)
EN 12971-3:1999 Reinforcements - Specification for textile glass chopped strands - Part 3: Specific requirements
EN 13417-1:2001 Reinforcement - Specifications for woven fabrics - Part 1: Designation
EN 13473-2:2001 Reinforcement - Specifications for multi-axial multi-ply fabrics - Part 2: Methods of test and general requirements
EN 50237:1997 Gloves and mitts with mechanical protection for electrical purposes
EN 62011-1:2002 Insulating materials - Industrial, rigid, moulded, laminated tubes and rods of rectangular and hexagonal cross-section based on thermosetting resins for electrical purposes - Part 1: Definitions, designations and general requirements
CEN/TR 16149:2011 Guidance Document for drafting CEN/TC 158 Standards
DIN EN ISO 12086-2:2006-05 PLASTICS - FLUOROPOLYMER DISPERSIONS AND MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
DIN EN ISO 13000-2:2006-02 Plastics - Polytetrafluoroethylene (PTFE) semi-finished products - Part 2: Preparation of test specimens and determination of properties (ISO 13000-2:2005)
EN 61212-3-1:2013 INSULATING MATERIALS - INDUSTRIAL RIGID ROUND LAMINATED TUBES AND RODS BASED ON THERMOSETTING RESINS FOR ELECTRICAL PURPOSES - PART 3: SPECIFICATIONS FOR INDIVIDUAL MATERIALS - SHEET 1: ROUND LAMINATED ROLLED TUBES (IEC 61212-3-1:2013)
DIN EN 13417-3:2002-03 REINFORCEMENT - SPECIFICATIONS FOR WOVEN FABRICS - PART 3: SPECIFIC REQUIREMENTS
DIN EN ISO 13000-1:2006-02 Plastics - Polytetrafluoroethylene (PTFE) semi-finished products - Part 1: Requirements and designation (ISO 13000-1:2005)
EN 12654-2:1998 Textile glass - Yarns - Part 2: Methods of test and general specifications
EN 131-2:2010+A2:2017 Ladders - Part 2: Requirements, testing, marking
DIN EN ISO 8330:2015-04 Rubber and plastics hoses and hose assemblies - Vocabulary (ISO 8330:2014)
EN 13002-2:1999 CARBON FIBRE YARNS - PART 2: TEST METHODS AND GENERAL SPECIFICATIONS
EN 13421:2006 Plastics - Thermoset moulding compounds - Composites and reinforcement fibres - Preparation of specimens for determining the anisotropy of the properties of compression moulding composites
EN 13003-2:1999 Para-aramid fibre filament yarns - Part 2: Methods of test and general specifications
EN 60893-1:2004 Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 1: Definitions, designations and general requirements
EN 13245-1:2010 Plastics - Unplasticized poly(vinyl chloride) (PVC-U) profiles for building applications - Part 1: Designation of PVC-U profiles
EN 60903 : 2003 COR 2005 LIVE WORKING - GLOVES OF INSULATING MATERIAL
EN 61212-1:2006 Insulating materials - Industrial rigid round laminated tubes and rods based on thermosetting resins for electrical purposes - Part 1: Definitions, designations and general requirements
CEN/TR 15438:2007 Plastics piping systems - Guidance for coding of products and their intended uses
DIN EN ISO 15750-3:2008-09 Packaging - Steel drums - Part 3: Inserted flange-type closure systems (ISO 15750-3:2002)
UNE-EN 12666-1:2006 Plastics piping systems for non-pressure underground drainage and sewerage - Polyethylene (PE) - Part 1: Specifications for pipes, fittings and the system
BS 2782-3.345A(1993) : 1993 AMD 8637 METHODS OF TESTING PLASTICS - MECHANICAL PROPERTIES - DETERMINATION OF COMPRESSIVE PROPERTIES
UNE-EN 16153:2013 Light transmitting flat multiwall polycarbonate (PC) sheets for internal and external use in roofs, walls and ceilings - Requirements and test methods

ISO 15850:2014 Plastics Determination of tension-tension fatigue crack propagation Linear elastic fracture mechanics (LEFM) approach
ISO 1139:1973 Textiles — Designation of yarns
ISO 974:2000 Plastics Determination of the brittleness temperature by impact
ISO 294-3:2002 Plastics Injection moulding of test specimens of thermoplastic materials Part 3: Small plates
ISO 14021:2016 Environmental labels and declarations — Self-declared environmental claims (Type II environmental labelling)
AS 1337.0:2020 Personal protective equipment Eye and face protection - Vocabulary
ISO 4587:2003 Adhesives Determination of tensile lap-shear strength of rigid-to-rigid bonded assemblies
ISO 294-2:1996 Plastics Injection moulding of test specimens of thermoplastic materials Part 2: Small tensile bars
ISO 291:2008 Plastics Standard atmospheres for conditioning and testing
ISO 294-1:2017 Plastics — Injection moulding of test specimens of thermoplastic materials — Part 1: General principles, and moulding of multipurpose and bar test specimens
ISO 13586:2000 Plastics Determination of fracture toughness (GIC and KIC) Linear elastic fracture mechanics (LEFM) approach
ISO 6601:2002 Plastics — Friction and wear by sliding — Identification of test parameters

View more information
$79.15
Including GST where applicable

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.