Customer Support: 131 242

  • There are no items in your cart
We noticed you’re not on the correct regional site. Switch to our AMERICAS site for the best experience.
Dismiss alert

ISO 48:2010

Withdrawn

Withdrawn

A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.

View Superseded by

Rubber, vulcanized or thermoplastic Determination of hardness (hardness between 10 IRHD and 100 IRHD)

Available format(s)

Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users

Withdrawn date

12-09-2018

Language(s)

French, English, Russian

Published date

03-09-2010

ISO 48:2010 specifies four methods for the determination of the hardness of vulcanized or thermoplastic rubbers on flat surfaces (standard-hardness methods) and four methods for the determination of the apparent hardness of curved surfaces (apparent-hardness methods). The hardness is expressed in international rubber hardness degrees (IRHD). The methods cover the hardness range from 10 IRHD to 100 IRHD.

These methods differ primarily in the diameter of the indenting ball and the magnitude of the indenting force, these being chosen to suit the particular application.

ISO 48:2010 does not specify a method for the determination of hardness by a pocket hardness meter, which is described in ISO 76192.

ISO 48:2010 does not specify the determination of the apparent hardness of rubber-covered rollers, which is specified in ISO 7267 (all parts).

DevelopmentNote
Supersedes ISO 1818 and ISO 1400 (04/2001) DRAFT ISO/DIS 48 has been withdrawn by the publisher. (11/2017)
DocumentType
Standard
Pages
25
PublisherName
International Organization for Standardization
Status
Withdrawn
SupersededBy
Supersedes

Standards Relationship
NF ISO 48 : 2010 Identical
BIS IS 3400-2 : 2014 Identical
DIN ISO 48:2016-09 Identical
NEN ISO 48 : 2010 Identical
UNI ISO 48 : 2011 Identical
BS ISO 48:2010 Identical
SAC GB/T 6031 : 1998 Identical
DIN 53519-1:1972-05 Corresponds
I.S. ISO 48:1986 Identical
NBN ISO 48 : 2003 Identical
NBN E 48 113 : 1988 Identical
UNE-ISO 48:2008 Identical
DIN 53519-2:1972-05 Corresponds

I.S. EN 13121-3:2016 GRP TANKS AND VESSELS FOR USE ABOVE GROUND - PART 3: DESIGN AND WORKMANSHIP
BS 2782-3 Method 365B:1981 Methods of testing plastics. Mechanical properties Determination of indentation hardness by means of a durometer (Shore hardness)
15/30298328 DC : 0 BS ISO 18898 - RUBBER - CALIBRATION AND VERIFICATION OF HARDNESS TESTERS
ISO 18898:2016 Rubber Calibration and verification of hardness testers
UNE-EN 50620:2017 Electric cables - Charging cables for electric vehicles
14/30274206 DC : 0 BS ISO 3537 - ROAD VEHICLES - SAFETY GLAZING MATERIALS - MECHANICAL TESTS
07/30046996 DC : DRAFT AUG 2007 BS ISO 1288-4 - GLAZING IN BUILDING - DETERMINATION OF THE BENDING STRENGTH OF GLASS - PART 4: TESTING OF CHANNEL SHAPED GLASS
DD ENV 13696:2001 Wood and parquet flooring. Determination of elasticity and resistance to wear
BS EN 12274-4:2003 Slurry surfacing. Test methods Determination of cohesion of the mix
13/30261812 DC : 0 BS ISO 10555-6 - INTRAVASCULAR CATHETERS - STERILE AND SINGLE-USE CATHETERS - PART 6: SUBCUTANEOUS IMPLANTED PORTS
ISO 6149-4:2017 Connections for fluid power and general use — Ports and stud ends with ISO 261 metric threads and O-ring sealing — Part 4: Dimensions, design, test methods and requirements for external hex and internal hex port plugs
DIN ISO 8536-6:2012-09 INFUSION EQUIPMENT FOR MEDICAL USE - PART 6: FREEZE DRYING CLOSURES FOR INFUSION BOTTLES (ISO 8536-6:2016)
12/30250853 DC : 0 BS ISO 17357-2 - SHIPS AND MARINE TECHNOLOGY - FLOATING PNEUMATIC RUBBER FENDERS - PART 2: LOW PRESSURE
14/30303794 DC : 0 BS EN 438-2 - HIGH-PRESSURE DECORATIVE LAMINATES (HPL) - SHEETS BASED ON THERMOSETTING RESINS (USUALLY CALLED LAMINATES) - PART 2: DETERMINATION OF PROPERTIES
BS ISO 4662:2017 Rubber, vulcanized or thermoplastic. Determination of rebound resilience
PREN 17142 : DRAFT 2017 MODULAR MULTILAYER FLOOR COVERINGS - ELEMENTS WITH A WOOD POWDER BASED SURFACE LAYER - SPECIFICATIONS, REQUIREMENTS AND TEST METHODS
DIN EN ISO 10545-4:2014-11 CERAMIC TILES - PART 4: DETERMINATION OF MODULUS OF RUPTURE AND BREAKING STRENGTH (ISO 10545-4:2014)
PD CEN/TS 12633:2014 Method of polishing specimens prior to the measurement of slip and skid resistance
PREN 438-2 : DRAFT 2014 HIGH-PRESSURE DECORATIVE LAMINATES (HPL) - SHEETS BASED ON THERMOSETTING RESINS (USUALLY CALLED LAMINATES) - PART 2: DETERMINATION OF PROPERTIES
NF ISO 188 : 2011 RUBBER, VULCANIZED OR THERMOPLASTIC - ACCELERATED AGEING AND HEAT RESISTANCE TESTS
02/101929 DC : DRAFT FEB 2002 PREN 12697-38 - BITUMINOUS MIXTURES - TEST METHODS FOR HOT MIX ASPHALT - PART 38: TEST EQUIPMENT AND CALIBRATION
07/30160665 DC : 0 BS EN 12790 - CHILD USE AND CARE ARTICLES - RECLINED CRADLES
I.S. EN ISO 3678:1995 PAINTS AND VARNISHES - PRINT-FREE TEST
05/30125061 DC : DRAFT MAR 2005 ISO 9974-4 - CONNECTIONS FOR GENERAL USE AND FLUID POWER STUD ENDS WITH ISO 261 THREADS WITH ELASTOMER METAL-TO-METAL SEALING - PART 4: DIMENSIONS, METHODS AND REQUIREMENTS FOR EXTERNAL PORT PLUGS
I.S. EN ISO 4869-3:2007 ACOUSTICS - HEARING PROTECTORS - PART 3: MEASUREMENT OF INSERTION LOSS OF EAR-MUFF TYPE PROTECTORS USING AN ACOUSTIC TEST FIXTURE
BS ISO 16932:2016 Glass in building. Destructive-windstorm-resistant security glazing. Test and classification
ISO 4925:2005 Road vehicles Specification of non-petroleum-base brake fluids for hydraulic systems
99/123581 DC : DRAFT OCT 1999 ISO/DIS 4633 - RUBBER SEALS - JOINT RINGS FOR WATER SUPPLY, DRAINAGE AND SEWERAGE PIPELINES - SPECIFICATION FOR MATERIALS
09/30181563 DC : 0 BS ISO 22762-1 - ELASTOMERIC SEISMIC-PROTECTION ISOLATORS - PART 1: TEST METHODS
17/30357593 DC : 0 BS ISO 4666-4 - RUBBER, VULCANIZED - DETERMINATION OF TEMPERATURE RISE AND RESISTANCE TO FATIGUE IN FLEXOMETER TESTING - PART 4: CONSTANT-STRESS FLEXOMETER
UNE-EN ISO 28706-3:2012 Vitreous and porcelain enamels - Determination of resistance to chemical corrosion - Part 3: Determination of resistance to chemical corrosion by alkaline liquids using a hexagonal vessel (ISO 28706-3:2008)
ISO 16933:2007 Glass in building — Explosion-resistant security glazing — Test and classification for arena air-blast loading
I.S. EN 1437:2002 PLASTICS PIPING SYSTEMS - PIPING SYSTEMS FOR UNDERGROUND DRAINAGE AND SEWERAGE - TEST METHOD FOR RESISTANCE TO COMBINED TEMPERATURE CYCLING AND EXTERNAL LOADING
BS ISO 4925:2005 Road vehicles. Specification of non-petroleum-base brake fluids for hydraulic systems
10/30199074 DC : 0 BS ISO 6162-1 - HYDRAULIC FLUID POWER - FLANGE CONNECTORS WITH SPLIT OR ONE-PIECE FLANGE CLAMPS AND METRIC OR INCH SCREWS - PART 1: FLANGE CONNECTORS FOR USE AT PRESSURES OF 3,5 MPA (35 BAR) TO 35 MPA (350 BAR), DN 13 TO DN 127
EN ISO 18797-1:2017 Petroleum, petrochemical and natural gas industries - External corrosion protection of risers by coatings and linings - Part 1: Elastomeric coating systems-polychloroprene or EPDM (ISO 18797-1:2016)
ISO 19003:2006 Rubber and rubber products — Guidance on the application of statistics to physical testing
BS ISO 24453:2008 Rubber. Acquisition and presentation of comparable single-point data
CSA Z323.4.9 : 0 WHEELCHAIRS - DETERMINATION OF COEFFICIENT OF FRICTION OF TEST SURFACES
I.S. EN 14483-4:2004 VITREOUS AND PORCELAIN ENAMELS - DETERMINATION OF RESISTANCE TO CHEMICAL CORROSION - PART 4: DETERMINATION OF RESISTANCE TO CHEMICAL CORROSION BY ALKALINE LIQUIDS USING A CYLINDRICAL VESSEL
05/30106298 DC : DRAFT JAN 2005 ISO 8980-4 - OPHTHALMIC OPTICS - UNCUT FINISHED SPECTACLE LENSES - PART 4: SPECIFICATIONS AND TEST METHODS FOR ANTIREFLECTIVE COATINGS
ISO 11040-5:2012 Prefilled syringes — Part 5: Plunger stoppers for injectables
ISO/TS 29584:2012 Glass in building — Pendulum impact testing and classification of safety glass for use in buildings
DIN ISO 27588:2014-12 RUBBER, VULCANIZED OR THERMOPLASTIC - DETERMINATION OF DEAD-LOAD HARDNESS USING THE VERY LOW RUBBER HARDNESS (VLRH) SCALE (ISO 27588:2012)
DIN 53150:2002-09 PAINTS AND VARNISHES - DETERMINATION OF THE DRYING STAGE OF COATINGS (MODIFIED BANDOW-WOLFF METHOD)
11/30251982 DC : 0 BS EN 12697-49 - BITUMINOUS MIXTURES - TEST METHODS FOR HOT MIX ASPHALT - PART 49: DETERMINATION OF FRICTION AFTER POLISHING
BS ISO 11040-5:2012 Prefilled syringes Plunger stoppers for injectables
NF EN 50508 : 2009 MULTI-PURPOSE INSULATING STICKS FOR ELECTRICAL OPERATIONS ON HIGH VOLTAGE INSTALLATIONS
BS 3558-1:1997 Glossary of rubber terms International terms
04/30124224 DC : DRAFT OCT 2004 ISO/DIS 16932 - GLASS IN BUILDING - DESTRUCTIVE-WINDSTORM-RESISTANT SECURITY GLAZING - TEST AND CLASSIFICATION
UNE-EN 15129:2011 Anti-seismic devices
07/30164021 DC : 0 BS ISO 27588 - RUBBER, VULCANIZED OR THERMOSET - DETERMINATION OF DEAD-LOAD HARDNESS USING THE VERY LOW RUBBER HARDNESS (VLRH) SCALE
BS EN ISO 9117-6:2012 Paints and varnishes. Drying tests Print-free test
DIN EN ISO 9117-1:2009-10 Paints and varnishes - Drying tests - Part 1: Determination of through-dry state and through-dry time (ISO 9117-1:2009)
BS 903-A57:1989 Physical testing of rubber Determination of indentation hardness by means of pocket hardness meters
DIN EN ISO 12945-3:2014-10 Textiles - Determination of the fabric propensity to surface pilling, fuzzing or matting - Part 3: Random tumble pilling method (ISO 12945-3:2014)
BS ISO 1817:2015 Rubber, vulcanized or thermoplastic. Determination of the effect of liquids
XP CEN/TS 15901-7 : 2011 XP ROAD AND AIRFIELD SURFACE CHARACTERISTICS - PART 7: PROCEDURE FOR DETERMINING THE SKID RESISTANCE OF A PAVEMENT SURFACE USING A DEVICE WITH LONGITUDINAL FIXED SLIP RATIO (LFCG): THE GRIPTESTER
09/30185894 DC : 0 BS EN 1344 - CLAY PAVERS - REQUIREMENTS AND TEST METHODS
XP PREN 3747 : 1995 XP AEROSPACE SERIES - O-RINGS, IN FLUOROSILICONE RUBBER (FVMQ) - TECHNICAL SPECIFICATION
08/30172620 DC : DRAFT OCT 2008 BS EN ISO 8536-6 - INFUSION EQUIPMENT FOR MEDICAL USE - PART 6: FREEZE DRYING CLOSURES FOR INFUSION BOTTLES
08/30185875 DC : 0 BS EN 1097-8 - TESTS FOR MECHANICAL AND PHYSICAL PROPERTIES OF AGGREGATES - PART 8: DETERMINATION OF THE POLISHED STONE VALUE
I.S. EN ISO 4007:2012 PERSONAL PROTECTIVE EQUIPMENT - EYE AND FACE PROTECTION - VOCABULARY (ISO 4007:2012)
DIN EN 1339:2003-08 CONCRETE PAVING FLAGS - REQUIREMENTS AND TEST METHODS
DIN ISO 6149-3:1996-11 CONNECTIONS FOR FLUID POWER AND GENERAL USE - PORTS AND STUD ENDS WITH ISO 261 THREADS AND O-RING SEALING - PART 3: LIGHT DUTY (L SERIES) STUD ENDS - DIMENSIONS, DESIGN, TEST METHODS AND REQUIREMENTS
98/714983 DC : DRAFT SEP 1998 ISO/CD 6149-4 - CONNECTIONS FOR FLUID POWER AND GENERAL USE - PORTS AND STUD ENDS WITH ISO 261 THREADS AND O-RING SEALING - PART 4: EXTERNAL HEX AND INTERNAL HEX PORT PLUGS - DIMENSIONS, DESIGN, TEST METHODS AND REQUIREMENTS
03/101907 DC : DRAFT AUG 2003 EN 14727 - LABORATORY FURNITURE - STORAGE UNITS FOR LABORATORIES - REQUIREMENTS AND TEST METHODS
I.S. EN ISO 10555-6:2017 INTRAVASCULAR CATHETERS - STERILE AND SINGLE-USE CATHETERS - PART 6: SUBCUTANEOUS IMPLANTED PORTS (ISO 10555-6:2015)
SAE J 1453/1 : 2012 SPECIFICATION FOR O-RING FACE SEAL CONNECTORS - PART 1: TUBE CONNECTION DETAILS AND COMMON REQUIREMENTS FOR PERFORMANCE AND TESTS
I.S. EN 16837:2018 SURFACES FOR SPORTS AREAS - DETERMINATION OF LINEAR SHOE/SURFACE FRICTION
00/560662 DC : DRAFT JAN 2000 PREN 13832 - FOOTWEAR PROTECTING AGAINST CHEMICALS AND MICRO-ORGANISMS
I.S. EN 16230-1:2013 LEISURE KARTS - PART 1: SAFETY REQUIREMENTS AND TEST METHODS FOR KARTS
08/30184292 DC : DRAFT SEP 2008 BS EN 12561-7 - RAILWAY APPLICATIONS - TANK WAGONS - PART 7: PLATFORMS AND LADDERS
17/30354090 DC : 0 BS EN 1081 - RESILIENT FLOOR COVERINGS - DETERMINATION OF THE ELECTRICAL RESISTANCE
13/30276381 DC : 0 BS ISO 3601-5 - FLUID POWER SYSTEMS - O-RINGS - PART 5: SPECIFICATION OF ELASTOMERIC MATERIALS FOR INDUSTRIAL APPLICATIONS
BS F 152:2006 Properties of silicone rubber sheet, mouldings and extrusions (general purpose). Specification
DD CEN/TS 15676 : DRAFT DEC 2007 WOOD FLOORING - SLIP RESISTANCE - PENDULUM TEST
BS ISO 11040-3:2012 Prefilled syringes Seals for dental local anaesthetic cartridges
DIN ISO 13226:2015-12 Rubber - Standard reference elastomers (SREs) for characterizing the effect of liquids on vulcanized rubbers (ISO 13226:2011)
05/30032019 DC : DRAFT SEP 2005 ISO 6194-1 - ROTARY SHAFT LIP TYPE SEALS INCORPORATING ELASTOMERIC SEALING ELEMENTS - PART 1: NOMINAL DIMENSIONS AND TOLERANCES
BS 7825-3.6:1997 Calibration of rubber and plastics test equipment. Calibration schedules Dimensional properties
10/30234616 DC : 0 BS EN 14420-7 - HOSE FITTINGS WITH CLAMP UNITS - PART 7: CAM LOCKING COUPLINGS
UNE-EN ISO 8362-5:2016 Injection containers and accessories - Part 5: Freeze drying closures for injection vials (ISO 8362-5:2016)
10/30234628 DC : 0 BS EN 14420-6 - HOSE FITTINGS WITH CLAMP UNITS - PART 6: TW TANK TRUCK COUPLINGS
BS ISO 12046:2012 Synchronous belt drives. Automotive belts. Determination of physical properties
BS 903-A63:1995 Physical testing of rubber Method for determination of crystallization effects by hardness measurements
15/30278562 DC : 0 BS ISO 18797-1 - PETROLEUM, PETROCHEMICALS AND NATURAL GAS INDUSTRIES - EXTERNAL CORROSION PROTECTION OF RISERS BY COATINGS AND LININGS - PART 1: ELASTOMERIC COATING SYSTEMS - POLYCHLOROPRENE OR EPDM
10/30234333 DC : DRAFT DEC 2010 BS EN 12561-7 - RAILWAY APPLICATIONS - TANK WAGONS - PART 7: PLATFORMS AND LADDERS
98/714984 DC : DRAFT SEP 1998 ISO/CD 8434-3 - METALLIC TUBE CONNECTIONS FOR FLUID POWER AND GENERAL USE - PART 3: O-RING FACE SEAL FITTINGS
PREN 12274-5 : DRAFT 2016 SLURRY SURFACING - TEST METHOD - PART 5: DETERMINATION OF THE MINIMUM BINDER CONTENT AND WEARING RESISTANCE
CEI EN 61823 : 2005 ELECTRICAL INSTALLATIONS FOR LIGHTING AND BEACONING OF AERODROMES - AGL SERIES TRANSFORMERS
09/30198143 DC : 0 BS ISO 13268 - THERMOPLASTICS PIPING SYSTEMS FOR NON PRESSURE UNDERGROUND DRAINAGE AND SEWERAGE - THERMOPLASTICS SHAFTS OR RISERS FOR INSPECTION CHAMBERS AND MANHOLES - DETERMINATION OF RING STIFFNESS
DIN EN ISO 28706-4:2016-07 VITREOUS AND PORCELAIN ENAMELS - DETERMINATION OF RESISTANCE TO CHEMICAL CORROSION - PART 4: DETERMINATION OF RESISTANCE TO CHEMICAL CORROSION BY ALKALINE LIQUIDS USING A CYLINDRICAL VESSEL (ISO 28706-4:2016)
BS ISO 18898:2016 Rubber. Calibration and verification of hardness testers
11/30245760 DC : 0 BS EN 13541 - GLASS IN BUILDING - SECURITY GLAZING - TESTING AND CLASSIFICATION OF RESISTANCE AGAINST EXPLOSION PRESSURE
BS ISO 24454:2008 Rubber. Acquisition and presentation of comparable multi-point data
05/30130019 DC : DRAFT JULY 2005 BS F 154 - PROPERTIES OF FLUOROSILICONE RUBBER SHEET, MOULDINGS AND EXTRUSIONS - SPECIFICATION
XP ENV 1519-2 : 2003 XP PLASTICS PIPING SYSTEMS FOR SOIL AND WASTE DISCHARGE (LOW AND HIGH TEMPERATURE) WITHIN THE BUILDING STRUCTURE - POLYETHYLENE (PE) - PART 2: GUIDANCE FOR THE ASSESSMENT OF CONFORMITY
BS ISO 4927:2005 Road vehicles. Elastomeric boots for cylinders for drum type hydraulic brake wheel cylinders using a non-petroleum base hydraulic brake fluid (service temperature 120°C max.)
99/104927 DC : DRAFT JUN 1999 PREN 13618 - WATER SUPPLY, FLEXIBLE HOSES (METALLIC AND ELASTOMERIC MATERIALS) - SPECIFICATION AND TEST METHODS
BS ISO 9631:2018 Rubber seals. Joint rings for pipelines for hot-water supply up to 110 °C. Specification for the material
99/108002 DC : DRAFT OCT 99 PREN 12600 - GLASS IN BUILDING - PENDULUM TEST - IMPACT TEST METHOD FOR FLAT GLASS AND PERFORMANCE REQUIREMENTS (SECOND ENQUIRY)
09/30179627 DC : 0 BS ISO 4007 - PERSONAL PROTECTIVE EQUIPMENT - EYE AND FACE PROTECTION - VOCABULARY
00/715333 DC : 0 ISO/CD 19879 - METALLIC TUBE CONNECTIONS FOR FLUID POWER AND GENERAL USE - TEST METHODS FOR HYDRAULIC FLUID POWER CONNECTIONS
DD ENV 581-2:2000 Mechanical safety requirements and test methods for seatingOutdoor furniture. Seating and tables for camping, domestic and contract use
UNI ISO 5636-5 : 2014 PAPER AND BOARD - DETERMINATION OF AIR PERMEANCE (MEDIUM RANGE) - PART 5: GURLEY METHOD
EN 15129:2018 (edition 2) Anti-seismic devices
04/30124232 DC : DRAFT OCT 2004 ISO/DIS 16935 - GLASS IN BUILDING - BULLET RESISTANT SECURITY GLAZING - TEST AND CLASSIFICATION
BS F 156:2006 Properties of fluid resistant ethylene-propylene rubber sheet, mouldings and extrusions. Specification
BS ISO 9911:2006 Agricultural irrigation equipment. Manually operated small plastics valves
UNI EN ISO 23936-2 : 2012 PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - NONMETALLIC MATERIALS IN CONTACT WITH MEDIA RELATED TO OIL AND GAS PRODUCTION - PART 2: ELASTOMERS
CEI EN 60544-2 : 2013 ELECTRICAL INSULATING MATERIALS - DETERMINATION OF THE EFFECTS OF IONIZING RADIATION ON INSULATING MATERIALS - PART 2: PROCEDURES FOR IRRADIATION AND TEST
BS EN 61518:2001 Mating dimensions between differential pressure (type) measuring instruments and flanged-on shut-off devices up to 413 bar (41,3 MPa)
BS EN 15566:2016 Railway applications. Railway rolling stock. Draw gear and screw coupling
BS EN ISO 18082 : 2014 ANAESTHETIC AND RESPIRATORY EQUIPMENT - DIMENSIONS OF NON-INTERCHANGEABLE SCREW-THREADED (NIST) LOW-PRESSURE CONNECTORS FOR MEDICAL GASES (ISO 18082:2014)
I.S. EN ISO 10545-4:2014 CERAMIC TILES - PART 4: DETERMINATION OF MODULUS OF RUPTURE AND BREAKING STRENGTH (ISO 10545-4:2014)
PREN 3747 : 200P1 AEROSPACE SERIES - O-RINGS, IN FLUOROSILICONE RUBBER (FVMQ) - TECHNICAL SPECIFICATION
ISO 6072:2011 Rubber Compatibility between hydraulic fluids and standard elastomeric materials
BS ISO 13226:2011 Rubber. Standard reference elastomers (SREs) for characterizing the effect of liquids on vulcanized rubbers
ISO 7076-3:2016 Fire protection Foam fire extinguishing systems Part 3: Medium expansion foam equipment
I.S. EN ISO 18797-1:2017 PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - EXTERNAL CORROSION PROTECTION OF RISERS BY COATINGS AND LININGS - PART 1: ELASTOMERIC COATING SYSTEMS-POLYCHLOROPRENE OR EPDM (ISO 18797-1:2016)
PREN 13541 : DRAFT 2011 GLASS IN BUILDING - SECURITY GLAZING - TESTING AND CLASSIFICATION OF RESISTANCE AGAINST EXPLOSION PRESSURE
S.R. CEN/TS 15901-13:2011 ROAD AND AIRFIELD SURFACE CHARACTERISTICS - PART 13: PROCEDURE FOR DETERMINING THE SKID RESISTANCE OF A PAVEMENT SURFACE BY MEASUREMENT OF A SIDEWAY FORCE COEFFICIENT (SFCO): THE ODOLIOGRAPH
ISO 8434-3:2005 Metallic tube connections for fluid power and general use — Part 3: O-ring face seal connectors
PREN 1081 : DRAFT 2017 RESILIENT FLOOR COVERINGS - DETERMINATION OF THE ELECTRICAL RESISTANCE
17/30328799 DC : 0 BS EN 549 - RUBBER MATERIALS FOR SEALS AND DIAPHRAGMS FOR GAS APPLIANCES AND GAS EQUIPMENT
I.S. EN 50620:2017 ELECTRIC CABLES - CHARGING CABLES FOR ELECTRIC VEHICLES
BS EN 16230-1 : 2013 LEISURE KARTS - PART 1: SAFETY REQUIREMENTS AND TEST METHODS FOR KARTS
I.S. EN ISO 13260:2011 THERMOPLASTICS PIPING SYSTEMS FOR NON-PRESSURE UNDERGROUND DRAINAGE AND SEWERAGE - TEST METHOD FOR RESISTANCE TO COMBINED TEMPERATURE CYCLING AND EXTERNAL LOADING (ISO 13260:2010)
CEI EN 50508 : 2009 MULTI-PURPOSE INSULATING STICKS FOR ELECTRICAL OPERATIONS ON HIGH VOLTAGE INSTALLATIONS
ISO 5636-5:2013 Paper and board — Determination of air permeance (medium range) — Part 5: Gurley method
ISO 5794-2:2014 Rubber compounding ingredients — Silica, precipitated, hydrated — Part 2: Evaluation procedures in styrene-butadiene rubber
NF ISO 13226 : 2011 RUBBER - STANDARD REFERENCE ELASTOMERS (SRES) FOR CHARACTERIZING THE EFFECT OF LIQUIDS ON VULCANIZED RUBBERS
ISO 27588:2012 Rubber, vulcanized or thermoplastic Determination of dead-load hardness using the very low rubber hardness (VLRH) scale
UNI EN ISO 12311 : 2013 PERSONAL PROTECTIVE EQUIPMENT - TEST METHODS FOR SUNGLASSES AND RELATED EYEWEAR
UNE-IEC 60092-360:2015 Electrical installations in ships - Part 360: Insulating and sheathing materials for shipboard and offshore units, power, control, instrumentation and telecommunication cables
BS ISO 3601-1:2012 Fluid power systems. O-rings Inside diameters, cross-sections, tolerances and designation codes
PREN 15834 : DRAFT 2008 REFRIGERATING SYSTEMS AND HEAT PUMPS - QUALIFICATION OF TIGHTNESS OF COMPONENTS AND JOINTS
UNI CEN/TS 12633 : 2014 METHOD OF POLISHING SPECIMENS PRIOR TO THE MEASUREMENT OF SLIP AND SKID RESISTANCE
XP ENV 1566-2 : 2003 XP PLASTICS PIPING SYSTEMS FOR SOIL AND WASTE DISCHARGE (LOW AND HIGH TEMPERATURE) WITHIN THE BUILDING STRUCTURE - CHLORINATED POLY(VINYL CHLORIDE) (PVC-C) - PART 2: GUIDANCE FOR ASSESSMENT OF CONFORMITY
BS 3734-1:1997 Rubber. Tolerances for products Dimensional tolerances
BS ISO 13926-3:2012 Pen systems Seals for pen-injectors for medical use
DIN EN ISO 8434-1 E : 2008 METALLIC TUBE CONNECTIONS FOR FLUID POWER AND GENERAL USE - PART 1: 24 DEGREE CONE CONNECTORS
BS EN 13832-3:2006 Footwear protecting against chemicals Requirements for footwear highly resistant to chemicals under laboratory conditions
17/30359554 DC : 0 BS EN 13832-2 - FOOTWEAR PROTECTING AGAINST CHEMICALS - PART 2: REQUIREMENTS FOR LIMITED CONTACT WITH CHEMICALS
DIN EN ISO 10555-6:2017-11 INTRAVASCULAR CATHETERS - STERILE AND SINGLE-USE CATHETERS - PART 6: SUBCUTANEOUS IMPLANTED PORTS (ISO 10555-6:2015)
DIN EN 15129:2010-06 ANTI-SEISMIC DEVICES
NF EN 12274-4 : 2003 SLURRY SURFACING - TEST METHOD - PART 4: DETERMINATION OF COHESION OF THE MIX
PREN 12697-22 : DRAFT 2013 BITUMINOUS MIXTURES - TEST METHODS FOR HOT MIX ASPHALT - PART 22: WHEEL TRACKING
NF EN 60512-7-1 : 2011 CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 7-1: IMPACT TESTS (FREE CONNECTORS) - TEST 7A: FREE FALL (REPEATED)
UNE-EN ISO 12945-3:2014 Textiles - Determination of the fabric propensity to surface pilling, fuzzing or matting - Part 3: Random tumble pilling method (ISO 12945-3:2014)
CEN/TS 12697-50:2016 BITUMINOUS MIXTURES - TEST METHODS - PART 50: RESISTANCE TO SCUFFING
I.S. HD 605:2008 ELECTRIC CABLES - ADDITIONAL TEST METHODS
ISO 16932:2016 Glass in building — Destructive-windstorm-resistant security glazing — Test and classification
I.S. EN 13071-1:2008 STATIONARY WASTE CONTAINERS UP TO 5000 L, TOP LIFTED AND BOTTOM EMPTIED - PART 1: GENERAL REQUIREMENTS
ASTM D 1415 : 2006 : R2012 Standard Test Method for Rubber Property—International Hardness
ISO 9211-4:2012 Optics and photonics Optical coatings Part 4: Specific test methods
I.S. EN 14382:2005 SAFETY DEVICES FOR GAS PRESSURE REGULATING STATIONS AND INSTALLATIONS - GAS SAFETY SHUT-OFF DEVICES FOR INLET PRESSURES UP TO 100 BAR
EN 476:2011 General requirements for components used in drains and sewers
DIN EN 14241-1:2013-11 CHIMNEYS - ELASTOMERIC SEALS AND ELASTOMERIC SEALANTS - MATERIAL REQUIREMENTS AND TEST METHODS - PART 1: SEALS IN FLUE LINERS
DIN EN ISO 5470-1:2015-04 (Draft) RUBBER- OR PLASTICS-COATED FABRICS - DETERMINATION OF ABRASION RESISTANCE - PART 1: TABER ABRADER (ISO 5470-1:2016)
DIN EN ISO 8980-4 E : 2006 OPHTHALMIC OPTICS - UNCUT FINISHED SPECTACLE LENSES - PART 4: SPECIFICATIONS AND TEST METHODS FOR ANTI-REFLECTIVE COATINGS
DIN EN 12561-7:2011-10 Railway applications - Tank wagons - Part 7: Platforms and ladders
DIN EN 13748-2:2005-03 Terrazzo tiles - Part 2: Terrazzo tiles for external use; German version EN 13748-2:2004
DIN EN 14382 E : 2009 SAFETY DEVICES FOR GAS PRESSURE REGULATING STATIONS AND INSTALLATIONS - GAS SAFETY SHUT-OFF DEVICES FOR INLET PRESSURES UP TO 100 BAR
BS EN 377:1993 Lubricants for applications in appliances and associated controls using combustible gases except those designed for use in industrial processes
BS EN ISO 8871-1:2004 Elastomeric parts for parenterals and for devices for pharmaceutical use Extractables in aqueous autoclavates
BS EN 1097-8:2009 Tests for mechanical and physical properties of aggregates Determination of the polished stone value
BS EN 12697-38:2004 Bituminous mixtures. Test methods for hot mix asphalt Test equipment and calibration
BS EN 3747:2007 Aerospace series. O-rings, in fluorosilicone rubber (FVMQ). Technical specification
EN 12697-22:2003+A1:2007 Bituminous mixtures - Test methods for hot mix asphalt - Part 22: Wheel tracking
BS EN 1130-2:1996 Furniture. Cribs and cradles for domestic use Test methods
DIN EN 14982:2011-01 Plastics piping and ducting systems - Thermoplastics shafts or risers for inspection chambers and manholes - Determination of ring stiffness (includes Amendment A1:2010)
BS EN 681-2:2000 Elastomeric seals. Material requirements for pipe joint seals used in water and drainage applications Thermoplastic elastomers
IEC 61230:2008 Live working - Portable equipment for earthing or earthing and short-circuiting
UNE-EN 476:2011 General requirements for components used in drains and sewers
BS EN ISO 8434-4:2000 Metallic tube connections for fluid power and general use 24° cone connectors with O-ring weld-on nipples
BS EN 14241-1:2013 Chimneys. Elastomeric seals and elastomeric sealants. Material requirements and test methods Seals in flue liners
BS EN 14382 : 2005 SAFETY DEVICES FOR GAS PRESSURE REGULATING STATIONS AND INSTALLATIONS - GAS SAFETY SHUT-OFF DEVICES FOR INLET PRESSURES UP TO 100 BAR
BS EN 1338:2003 Concrete paving blocks. Requirements and test methods
BS EN ISO 868:2003 Plastics and ebonite. Determination of indentation hardness by means of a durometer (Shore hardness)
BS EN 527-3:2003 Office furniture. Work tables and desks Methods of test for the determination of the stability and the mechanical strength of the structure
BS EN 1339:2003 Concrete paving flags. Requirements and test methods
BS EN 681-1:1996 Elastomeric seals. Material requirements for pipe joint seals used in water and drainage applications Vulcanized rubber
BS EN 1437:2002 Plastics piping systems. Piping systems for underground drainage and sewerage. Test method for resistance to combined temperature cycling and external loading
BS EN 12227-2:1999 Playpens for domestic use Test methods
BS EN 13597:2003 Railway applications. Rubber suspension components. Rubber diaphragms for pneumatic suspension springs
BS EN ISO 4869-3:2007 Acoustics. Hearing protectors Measurement of insertion loss of ear-muff type protectors using an acoustic test fixture
BS EN 1340:2003 Concrete kerb units. Requirements and test methods
UNI EN ISO 8871-2 : 2014 ELASTOMERIC PARTS FOR PARENTERALS AND FOR DEVICES FOR PHARMACEUTICAL USE - PART 2: IDENTIFICATION AND CHARACTERIZATION
DIN ISO 8536-6:2017-09 INFUSION EQUIPMENT FOR MEDICAL USE - PART 6: FREEZE DRYING CLOSURES FOR INFUSION BOTTLES (ISO 8536-6:2016)
DIN EN 14483-2:2004-09 VITREOUS AND PORCELAIN ENAMELS - DETERMINATION OF RESISTANCE TO CHEMICAL CORROSION - PART 2: DETERMINATION OF RESISTANCE TO CHEMICAL CORROSION BY BOILING ACIDS, NEUTRAL LIQUIDS AND/OR THEIR VAPOURS
I.S. EN 15330-1:2013 SURFACES FOR SPORTS AREAS - SYNTHETIC TURF AND NEEDLE-PUNCHED SURFACES PRIMARILY DESIGNED FOR OUTDOOR USE - PART 1: SPECIFICATION FOR SYNTHETIC TURF SURFACES FOR FOOTBALL, HOCKEY, RUGBY UNION TRAINING, TENNIS AND MULTI-SPORTS USE
DIN EN 13787:2002-04 ELASTOMERS FOR GAS PRESSURE REGULATORS AND ASSOCIATED SAFETY DEVICES FOR INLET PRESSURES UP TO 100 BAR
EN 13541:2012 Glass in building - Security glazing - Testing and classification of resistance against explosion pressure
EN 61823:2003 Electrical installations for lighting and beaconing of aerodromes - AGL series transformers
EN 1288-5:2000 Glass in building - Determination of the bending strength of glass - Part 5: Coaxial double ring test on flat specimens with small test surface areas
EN 1288-2:2000 Glass in building - Determination of bending strength of glass - Part 2: Coaxial double ring test on flat specimens with large test surface areas
CEN/TS 15901-4:2009 Road and airfield surface characteristics - Part 4: Procedure for determining the skid resistance of pavements using a device with longitudinal controlled slip (LFCT): Tatra Runway Tester (TRT)
EN ISO 19879:2010 Metallic tube connections for fluid power and general use - Test methods for hydraulic fluid power connections (ISO 19879:2010)
EN 1130-2 : 1996 FURNITURE - CRIBS AND CRADLES FOR DOMESTIC USE - PART 2: TEST METHODS
CEN/TS 15901-13:2011 Road and airfield surface characteristics - Part 13: Procedure for determining the skid resistance of a pavement surface by measurement of a sideway force coefficient (SFCO): the Odoliograph
EN 1293:1999 General requirements for components used in pneumatically pressurized discharge pipes, drains and sewers
EN 1123-1:1999/A1:2004 PIPES AND FITTINGS OF LONGITUDINALLY WELDED HOT-DIP GALVANIZED STEEL PIPES WITH SPIGOT AND SOCKET FOR WASTE WATER SYSTEMS - PART 1: REQUIREMENTS, TESTING, QUALITY CONTROL
EN 12561-7:2011 Railway applications - Tank wagons - Part 7: Platforms and ladders
EN 1288-4:2000 Glass in building - Determination of the bending strength of glass - Part 4: Testing of channel shaped glass
EN 1153:1995/AC:1996 KITCHEN FURNITURE - SAFETY REQUIREMENTS AND TEST METHODS FOR BUILT-IN AND FREE STANDING KITCHEN CABINETS AND WORK TOPS
EN 1051-1:2003 Glass in building - Glass blocks and glass pavers - Part 1: Definitions and description
CEN/TS 15676:2007 Wood flooring - Slip resistance - Pendulum test
CEN/TS 12633:2014 Method of polishing specimens prior to the measurement of slip and skid resistance
DIN EN ISO 5470-1:2017-04 RUBBER- OR PLASTICS-COATED FABRICS - DETERMINATION OF ABRASION RESISTANCE - PART 1: TABER ABRADER (ISO 5470-1:2016)
DIN EN ISO 8434-1:2008-02 METALLIC TUBE CONNECTIONS FOR FLUID POWER AND GENERAL USE - PART 1: 24 DEGREE CONE CONNECTORS
EN 13071 : 2002 SELECTIVE WASTE COLLECTION CONTAINERS - ABOVE-GROUND MECHANICALLY-LIFTED CONTAINERS WITH CAPACITIES FROM 80 L TO 5000 L FOR SELECTIVE COLLECTION OF WASTE
EN 1437:2002 Plastics piping systems - Piping systems for underground drainage and sewerage - Test method for resistance to combined temperature cycling and external loading
EN 12503-6:2001 Sports mats - Part 6: Determination of the top friction
EN 12790:2009 Child use and care articles - Reclined cradles
EN 61230:2008 LIVE WORKING - PORTABLE EQUIPMENT FOR EARTHING OR EARTHING AND SHORT-CIRCUITING
EN 13121-3:2016 GRP tanks and vessels for use above ground - Part 3: Design and workmanship
CEN/TS 15901-6:2009 Road and airfield surface characteristics - Part 6: Procedure for determining the skid resistance of a pavement surface by measurement of the sideway force coefficient (SFCS): SCRIM®
EN 1288-3:2000 Glass in building - Determination of the bending strength of glass - Part 3: Test with specimen supported at two points (four point bending)
EN 12274-4:2018 Slurry surfacing - Test methods - Part 4: Determination of cohesion of the mix
EN 1338:2003/AC:2006 CONCRETE PAVING BLOCKS - REQUIREMENTS AND TEST METHODS
EN 50014:1997/A2:1999 ELECTRICAL APPARATUS FOR POTENTIALLY EXPLOSIVE ATMOSPHERES - GENERAL REQUIREMENTS
EN 13213 : 2001 HOLLOW FLOORS
DIN EN 15551:2011-01 RAILWAY APPLICATIONS - RAILWAY ROLLING STOCK - BUFFERS
EN 13036-4:2011 Road and airfield surface characteristics - Test methods - Part 4: Method for measurement of slip/skid resistance of a surface: The pendulum test
ONORM EN ISO 8536-2 : 2010 INFUSION EQUIPMENT FOR MEDICAL USE - PART 2: CLOSURES FOR INFUSION BOTTLES
ENV 1566-2:2001 Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Chlorinated poly (vinyl chloride) (PVC-C) - Part 2: Guidance for the assessment of conformity
NF EN ISO 8536-2 : 2010 INFUSION EQUIPMENT FOR MEDICAL USE - PART 2: CLOSURES FOR INFUSION BOTTLES
DEFSTAN 93-55/3(2009) : 2009 BUTYL RUBBER, TYPE NBC
ENV 1565-2:2001 Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Styrene copolymer blends (SAN+PVC) - Part 2: Guidance for the assessment of conformity
ENV 1455-2:2001 Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Acrylonitrile-butadiene-styrene (ABS) - Part 2: Guidance for the assessment of conformity
ENV 1451-2:2001 Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Polypropylene (PP) - Part 2: Guidance for the assessment of conformity
ENV 1519-2:2001 Plastics piping systems for soil and waste discharge (low and high temperature) within the building stucture - Polyethylene (PE) - Part 2: Guidance for the assessment of conformity
ONORM EN 14982 : 2010 PLASTICS PIPING AND DUCTING SYSTEMS - THERMOPLASTICS SHAFTS OR RISERS FOR INSPECTION CHAMBERS AND MANHOLES - DETERMINATION OF RING STIFFNESS
BS 903-A19(1998) : 1998 RUBBER, VULCANIZED OR THERMOPLASTIC - ACCELERATED AGEING AND HEAT RESISTANCE TESTS
ONORM EN 12790 : 2009 CHILD USE AND CARE ARTICLES - RECLINED CRADLES
ASME BPE : 2016 BIOPROCESSING EQUIPMENT
DIN ISO 6149-2:1996-11 PORTS AND STUD ENDS WITH ISO 261 THREADS AND O-RING SEALING - PART 2: HEAVY DUTY (S SERIES) STUD ENDS - DIMENSIONS, DESIGN, TEST METHODS AND REQUIREMENTS
NF ISO 15082 : 2000 ROAD VEHICLES - TESTS FOR RIGID PLASTIC SAFETY GLAZING MATERIALS
14/30288717 DC : DRAFT JAN 2014 BS EN ISO 1288-5 - GLASS IN BUIDING - DETERMINATION OF THE BENDING STRENGTH OF GLASS - PART 5: COAXIAL DOUBLE-RING TEST ON FLAT SPECIMENS WITH SMALL TEST SURFACE AREAS
BS ISO 4639-2:1995 Rubber tubing and hoses for fuel circuits for internal-combustion engines. Specification Oxygenated fuels
BS ISO 6194-4:2009 Rotary shaft lip-type seals incorporating elastomeric sealing elements Performance test procedures
BS F 164:2006 Properties of elastomeric toroidal sealing rings (\'O\' rings) manufactured from fluorosilicone rubber material released to BS F 154. Specification
11/30212455 DC : 0 BS ISO 3387 - RUBBER - DETERMINATION OF CRYSTALLIZATION EFFECTS BY HARDNESS MEASUREMENTS
03/308001 DC : DRAFT JUNE 2003 ISO 22762-1 - ELASTOMERIC SEISMIC-PROTECTION ISOLATORS - PART 1: TEST METHODS
10/30218554 DC : 0 BS ISO 13926-3 - PEN SYSTEMS - PART 3: SEALS FOR PEN-INJECTORS FOR MEDICAL USE
16/30314847 DC : 0 BS EN ISO 28706-3 - VITREOUS AND PORCELAIN ENAMELS - DETERMINATION OF RESISTANCE TO CHEMICAL CORROSION - PART 3: DETERMINATION OF RESISTANCE TO CHEMICAL CORROSION BY ALKALINE LIQUIDS USING A HEXAGONAL VESSEL OR A TETRAGONAL GLASS BOTTLE
BS ISO 6149-3:1993 Connections for fluid power and general use. Ports and stud ends with ISO 261 threads and O-ring sealing Light-duty (L series) stud ends. Dimensions, design, test methods and requirements
UNE-EN ISO 28706-2:2017 Vitreous and porcelain enamels - Determination of resistance to chemical corrosion - Part 2: Determination of resistance to chemical corrosion by boiling acids, boiling neutral liquids, alkaline liquids and/or their vapours (ISO 28706-2:2017)
ISO 3387:2012 Rubber Determination of crystallization effects by hardness measurements
UNE-EN ISO 9117-6:2013 Paints and varnishes - Drying tests - Part 6: Print-free test (ISO 9117-6:2012)
S.R. CEN/TS 15901-6:2009 ROAD AND AIRFIELD SURFACE CHARACTERISTICS - PART 6: PROCEDURE FOR DETERMINING THE SKID RESISTANCE OF A PAVEMENT SURFACE BY MEASUREMENT OF THE SIDEWAY FORCE COEFFICIENT (SFCS): SCRIM(R)
07/30144370 DC : 0 BS ISO 3601-1 - FLUID POWER SYSTEMS - O-RINGS - PART 1: INSIDE DIAMETERS, CROSS-SECTIONS, TOLERANCES AND DESIGNATION CODES
API TR 1PER15K-1 : 2013 PROTOCOL FOR VERIFICATION AND VALIDATION OF HIGH-PRESSURE HIGH-TEMPERATURE EQUIPMENT
BS EN 16084:2011 Refrigerating systems and heat pumps. Qualification of tightness of components and joints
BS ISO 13260 : 2010 THERMOPLASTICS PIPING SYSTEMS FOR NON-PRESSURE UNDERGROUND DRAINAGE AND SEWERAGE - TEST METHOD FOR RESISTANCE TO COMBINED TEMPERATURE CYCLING AND EXTERNAL LOADING
I.S. EN ISO 9117-5:2012 PAINTS AND VARNISHES - DRYING TESTS - PART 5: MODIFIED BANDOW-WOLFF TEST (ISO 9117-5:2012)
XP CEN/TS 15901-4 : 2011 XP ROAD AND AIRFIELD SURFACE CHARACTERISTICS - PART 4: PROCEDURE FOR DETERMINING THE SKID RESISTANCE OF PAVEMENTS USING A DEVICE WITH LONGITUDINAL CONTROLLED SLIP (LFCT): TATRA RUNWAY TESTER (TRT)
12/30196194 DC : 0 BS ISO 5636-5 - PAPER AND BOARD - DETERMINATION OF AIR PERMEANCE AND AIR RESISTANCE (MEDIUM RANGE) - PART 5: GURLEY METHOD
05/30127027 DC : DRAFT JULY 2005 ISO 6118 - ROAD VEHICLES - ELASTOMERIC CUPS AND SEALS FOR CYLINDERS FOR HYDRAULIC BRAKING SYSTEMS USING A NON-PETROLEUM BASE HYDRAULIC BRAKE FLUID (SERVICE TEMPERATURE 70 DEGREES C MAX.)
03/300201 DC : DRAFT FEB 2003 IEC 60079-0 ED.4.0 - ELECTRICAL APPARATUS FOR EXPLOSIVE GAS ATMOSPHERES - PART 0: GENERAL REQUIREMENTS
ISO 1288-4:2016 Glass in building — Determination of the bending strength of glass — Part 4: Testing of channel shaped glass
16/30334939 DC : 0 BS ISO 4666-3 - RUBBER, VULCANIZED - DETERMINATION OF TEMPERATURE RISE AND RESISTANCE TO FATIGUE IN FLEXOMETER TESTING - PART 3: COMPRESSION FLEXOMETER (CONSTANT-STRAIN TYPE)
BS ISO 3601-5:2015 Fluid power systems. O-rings Specification of elastomeric materials for industrial applications
BS ISO 6446:1994 Rubber products. Bridge bearings. Specification for rubber materials
BS EN ISO 9117-1:2009 Paints and varnishes. Drying tests Determination of through-dry state and through-dry time
DIN EN ISO 8362-5 E : 2016 INJECTION CONTAINERS AND ACCESSORIES - PART 5: FREEZE DRYING CLOSURES FOR INJECTION VIALS (ISO 8362-5:2016)
04/30109416 DC : DRAFT FEB 2004 ISO 8980-5 - OPHTHALMIC OPTICS - UNCUT FINISHED SPECTACLE LENSES - PART 5: MINIMUM REQUIREMENTS FOR SPECTACLE LENS SURFACES CLAIMED TO BE ABRASION-RESISTANT
01/714274 DC : 0 ISO/DIS 1179-3 - CONNECTIONS FOR GENERAL USE AND FLUID POWER - PORTS AND STUD ENDS WITH ISO 228-1 THREADS WITH ELASTOMERIC OR METAL-TO-METAL SEALING - PART 3: LIGHT-DUTY (L SERIES) STUD ENDS WITH SEALING BY O-RING WITH RETAINING RING (TYPES G AND H)
BS ISO 11040-2:2011 Prefilled syringes Plunger stoppers for dental local anaesthetic cartridges
16/30290140 DC : 0 BS EN ISO 8434-1 - METALLIC TUBE CONNECTIONS FOR FLUID POWER AND GENERAL USE - PART 1: 24 DEGREES CONE CONNECTORS
BS 6913-14:1997 Operation and maintenance of earth-moving machinery Specification for lubrication fittings. Grease-gun nozzles
10/30234631 DC : 0 BS EN 14420-8 - HOSE FITTINGS WITH CLAMP UNITS - PART 8: SYMMETRICAL HALF COUPLING (GUILLEMIN SYSTEM)
07/30169159 DC : 0 BS ISO 28706-3 - VITREOUS AND PORCELAIN ENAMELS - DETERMINATION OF RESISTANCE TO CHEMICAL CORROSION - PART 3: DETERMINATION OF RESISTANCE TO CHEMICAL CORROSION BY ALKALINE LIQUIDS USING A HEXAGONAL VESSEL
BS EN ISO 13260 : 2011 THERMOPLASTICS PIPING SYSTEMS FOR NON-PRESSURE UNDERGROUND DRAINAGE AND SEWERAGE - TEST METHOD FOR RESISTANCE TO COMBINED TEMPERATURE CYCLING AND EXTERNAL LOADING (ISO 13260:2010)
BS ISO 18797-1 : 2016 COR 2017 PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - EXTERNAL CORROSION PROTECTION OF RISERS BY COATINGS AND LININGS - PART 1: ELASTOMERIC COATING SYSTEMSPOLYCHLOROPRENE OR EPDM
PREN 681-1 : DRAFT 2016 ELASTOMERIC SEALS - MATERIAL REQUIREMENTS FOR PIPE JOINT SEALS USED IN WATER AND DRAINAGE APPLICATIONS - PART 1: VULCANIZED RUBBER
16/30338439 DC : 0 BS EN ISO 14903 - REFRIGERATING SYSTEMS AND HEAT PUMPS - QUALIFICATION OF TIGHTNESS OF COMPONENTS AND JOINTS
I.S. EN 12274-5:2018 SLURRY SURFACING - TEST METHOD - PART 5: DETERMINATION OF THE MINIMUM BINDER CONTENT AND WEARING RESISTANCE
EN 50620:2017 Electric cables - Charging cables for electric vehicles
10/30216808 DC : 0 BS ISO 11040-3 - PREFILLED SYRINGES - PART 3: SEALS FOR DENTAL LOCAL ANAESTHETIC CARTRIDGES
ISO 2853:1993 Stainless steel threaded couplings for the food industry
05/30135789 DC : DRAFT JUL 2005 EN ISO 8434-1 - METALLIC TUBE CONNECTIONS FOR FLUID POWER AND GENERAL USE - PART 1: 24 DEGREES CONE CONNECTORS
BS ISO 8434-6:2009 Metallic tube connections for fluid power and general use 60° cone connectors with or without O-ring
10/30229700 DC : 0 BS EN ISO 9117-6 - PAINTS AND VARNISHES - DRYING TESTS - PART 6: PRINT-FREE TEST
BS 1344-15:1984 Methods of testing vitreous enamel finishes Apparatus for testing with alkaline liquids
03/110542 DC : DRAFT JUNE 2003 ISO 16936-1 - GLASS IN BUILDING - FORCED-ENTRY SECURITY GLAZING - PART 1: TEST AND CLASSIFICATION BY REPETITIVE BALL DROP
14/30287215 DC : 0 BS ISO 18869 - HYDRAULIC FLUID POWER - TEST METHODS FOR COUPLINGS ACTUATED WITH OR WITHOUT TOOLS
BS ISO 7619-1:2010 Rubber, vulcanized or thermoplastic. Determination of indentation hardness Durometer method (Shore hardness)
I.S. EN 16084:2011 REFRIGERATING SYSTEMS AND HEAT PUMPS - QUALIFICATION OF TIGHTNESS OF COMPONENTS AND JOINTS
DIN EN 15551:2013-05 (Draft) RAILWAY APPLICATIONS - RAILWAY ROLLING STOCK - BUFFERS
11/30232899 DC : 0 BS ISO 6162-2 - HYDRAULIC FLUID POWER - FLANGE CONNECTIONS WITH SPLIT OR ONE-PIECE FLANGE CLAMPS AND METRIC OR INCH SCREWS - PART 2: FLANGE CONNECTORS, PORTS AND MOUNTING SURFACES FOR USE AT A PRESSURE OF 42 MPA (420 BAR), DN 13 TO DN 76
UNI CEN/TS 15901-13 : 2011 ROAD AND AIRFIELD SURFACE CHARACTERISTICS - PART 13: PROCEDURE FOR DETERMINING THE SKID RESISTANCE OF A PAVEMENT SURFACE BY MEASUREMENT OF A SIDEWAY FORCE COEFFICIENT (SFCO): THE ODOLIOGRAPH
BS EN 61241-0:2006 Electrical apparatus for use in the presence of combustible dust General requirements
16/30320756 DC : 0 BS EN 1097-8 - TESTS FOR MECHANICAL AND PHYSICAL PROPERTIES OF AGGREGATES - PART 8: DETERMINATION OF THE POLISHED STONE VALUE
BS ISO 6149-4 : 2006 CONNECTIONS FOR FLUID POWER AND GENERAL USE - PORTS AND STUD ENDS WITH ISO 261 METRIC THREADS AND O-RING SEALING - PART 4: DIMENSIONS, DESIGN, TEST METHODS AND REQUIREMENTS FOR EXTERNAL HEX AND INTERNAL HEX PORT PLUGS
DIN ISO 11040-5:2013-12 PREFILLED SYRINGES - PART 5: PLUNGER STOPPERS FOR INJECTABLES (ISO 11040-5:2012)
BS EN ISO 4007:2012 Personal protective equipment. Eye and face protection. Vocabulary
HD 605 S2:2008/corrigendum:2010 ELECTRIC CABLES - ADDITIONAL TEST METHODS
UNI EN ISO 12945-3 : 2014 TEXTILES - DETERMINATION OF THE FABRIC PROPENSITY TO SURFACE PILLING, FUZZING OR MATTING - PART 3: RANDOM TUMBLE PILLING METHOD
14/30301115 DC : 0 BS EN 3207 - AEROSPACE SERIES - RUBBER COMPOUNDS - TECHNICAL SPECIFICATION
17/30334044 DC : 0 BS ISO 22762-1 - ELASTOMERIC SEISMIC-PROTECTION ISOLATORS - PART 1: TEST METHODS
10/30167702 DC : 0 BS ISO 4635 - RUBBER, VULCANIZED - PREFORMED JOINT SEALS FOR USE BETWEEN CONCRETE HIGHWAY PAVING SECTIONS - SPECIFICATION
UNE-ISO 3387:2013 Rubber. Determination of crystallization effects by hardness measurements.
BS AU 174-2:1985 Hydraulic brake systems, using non-petroleum base brake fluids for road vehicles Specification for non-petroleum base brake fluid
05/30133342 DC : DRAFT MAY 2005 ISO 18898 - RUBBER - CALIBRATION AND VERIFICATION OF HARDNESS TESTERS
BS ISO 17357-2:2014 Ships and marine technology. Floating pneumatic rubber fenders Low pressure
11/30250546 DC : 0 BS EN 14241-1 - CHIMNEYS - ELASTOMERIC SEALS AND ELASTOMERIC SEALANTS - MATERIAL REQUIREMENTS AND TEST METHODS - PART 1: SEALS IN FLUE LINERS
BS EN 50508:2009 Multi-purpose insulating sticks for electrical operations on high voltage installations
BS DD192(1990) : 1990 METHOD FOR MEASUREMENT OF INSERTION LOSS OF EAR-MUFF TYPE HEARING PROTECTORS (SIMPLIFIED METHOD FOR QUALITY INSPECTION PURPOSES)
05/30127022 DC : DRAFT AUG 2005 ISO 4928 - ROAD VEHICLES - ELASTOMERIC CUPS AND SEALS FOR CYLINDERS FOR HYDRAULIC BRAKING SYSTEMS USING A NON-PETROLEUM BASE HYDRAULIC BRAKE FLUID (SERVICE TEMPERATURE 120 DEGREE C MAX.)
PREN 549 : DRAFT 2017 RUBBER MATERIALS FOR SEALS AND DIAPHRAGMS FOR GAS APPLIANCES AND GAS EQUIPMENT
BS EN 15551:2017 Railway applications. Railway rolling stock. Buffers
12/30227277 DC : 0 BS ISO 9211-4 - OPTICS AND OPTICAL INSTRUMENTS - OPTICAL COATINGS - PART 4: SPECIFIC TEST METHODS
DD ENV 1451-2:2001 Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure. Polypropylene (PP) Guidance for the assessment of conformity
XP ENV 1455-2 : 2003 XP PLASTICS PIPING SYSTEMS FOR SOIL AND WASTE DISCHARGE (LOW AND HIGH TEMPERATURE) WITHIN THE BUILDING STRUCTURE - ACRYLONITRILE-BUTADIENE-STYRENE (ABS) - PART 2: GUIDANCE FOR THE ASSESSMENT OF CONFORMITY
BS ISO 6356:2012 Textile and laminate floor coverings. Assessment of static electrical propensity. Walking test
BS 1344-14:1984 Methods of testing vitreous enamel finishes Apparatus for testing with acid and neutral liquids and their vapours
S.R. CEN/TS 15901-7:2009 ROAD AND AIRFIELD SURFACE CHARACTERISTICS - PART 7: PROCEDURE FOR DETERMINING THE SKID RESISTANCE OF A PAVEMENT SURFACE USING A DEVICE WITH LONGITUDINAL FIXED SLIP RATIO (LFCG): THE GRIPTESTER(R)
I.S. EN 15129:2009 ANTI-SEISMIC DEVICES
07/30161672 DC : 0 BS ISO 24453 - RUBBER - ACQUISITION AND PRESENTATION OF COMPARABLE SINGLE-POINT DATA
PREN 14241-1 : DRAFT 2011 CHIMNEYS - ELASTOMERIC SEALS AND ELASTOMERIC SEALANTS - MATERIAL REQUIREMENTS AND TEST METHODS - PART 1: SEALS IN FLUE LINERS
NF EN ISO 13260 : 2011 AMD 1 2017 THERMOPLASTICS PIPING SYSTEMS FOR NON-PRESSURE UNDERGROUND DRAINAGE AND SEWERAGE - TEST METHOD FOR RESISTANCE TO COMBINED TEMPERATURE CYCLING AND EXTERNAL LOADING
I.S. EN ISO 28706-3:2018 VITREOUS AND PORCELAIN ENAMELS - DETERMINATION OF RESISTANCE TO CHEMICAL CORROSION - PART 3: DETERMINATION OF RESISTANCE TO CHEMICAL CORROSION BY ALKALINE LIQUIDS USING A HEXAGONAL VESSEL OR A TETRAGONAL GLASS BOTTLE (ISO 28706-3:2017)
DIN EN 15807:2011-05 Railway applications - Pneumatic half couplings
UNE-ISO 13226:2017 Rubber. Standard reference elastomers (SREs) for characterizing the effect of liquids on vulcanized rubbers.
BS ISO 16589-1 : 2011 ROTARY SHAFT LIP-TYPE SEALS INCORPORATING THERMOPLASTIC SEALING ELEMENTS - PART 1: NOMINAL DIMENSIONS AND TOLERANCES
DIN EN 16084:2011-07 REFRIGERATING SYSTEMS AND HEAT PUMPS - QUALIFICATION OF TIGHTNESS OF COMPONENTS AND JOINTS
PREN 14420-6 : DRAFT 2010 HOSE FITTINGS WITH CLAMP UNITS - PART 6: TW TANK TRUCK COUPLINGS
DIN EN 61518:2002-06 MATING DIMENSIONS BETWEEN DIFFERENTIAL PRESSURE (TYPE) MEASURING INSTRUMENTS AND FLANGED-ON SHUT-OFF DEVICES UP TO 413 BAR (41,3 MPA)
ISO 4666-3:2016 Rubber, vulcanized — Determination of temperature rise and resistance to fatigue in flexometer testing — Part 3: Compression flexometer (constant-strain type)
ISO 4639-2:1995 Rubber tubing and hoses for fuel circuits for internal-combustion engines Specification Part 2: Oxygenated fuels
I.S. EN 60068-2-31:2008 ENVIRONMENTAL TESTING - PART 2-31: TESTS - TEST EC: ROUGH HANDLING SHOCKS, PRIMARILY FOR EQUIPMENT-TYPE SPECIMENS
ISO 4195:2012 Conveyor belts with heat-resistant rubber covers — Heat resistance of covers — Requirements and test methods
BS ISO 4639-3:1995 Rubber tubing and hoses for fuel circuits for internal-combustion engines. Specification Oxidized fuels
ISO 17357-2:2014 Ships and marine technology — Floating pneumatic rubber fenders — Part 2: Low pressure
ISO 4662:2017 Rubber, vulcanized or thermoplastic Determination of rebound resilience
ISO 13260:2010 Thermoplastics piping systems for non-pressure underground drainage and sewerage Test method for resistance to combined temperature cycling and external loading
S.R. CEN/TS 15676:2007 WOOD FLOORING - SLIP RESISTANCE - PENDULUM TEST
SAE J 515 : 2015 SPECIFICATION FOR O-RING MATERIALS USED WITH HYDRAULIC CONNECTORS
I.S. EN ISO 9117-6:2012 PAINTS AND VARNISHES - DRYING TESTS - PART 6: PRINT-FREE TEST (ISO 9117-6:2012)
I.S. HD 632:2016 POWER CABLES WITH EXTRUDED INSULATION AND THEIR ACCESSORIES FOR RATED VOLTAGES ABOVE 36 KV (U[M] = 42 KV) UP TO 150 KV (U[M] = 170 KV)
PREN 1340 : DRAFT 2010 CONCRETE KERB UNITS - REQUIREMENTS AND TEST METHODS
I.S. EN 60544-4:2003 ELECTRICAL INSULATING MATERIALS - DETERMINATION OF THE EFFECTS OF IONIZING RADIATION - PART 4: CLASSIFICATION SYSTEM FOR SERVICE IN RADIATION ENVIRONMENTS
I.S. EN ISO 12945-3:2014 TEXTILES - DETERMINATION OF THE FABRIC PROPENSITY TO SURFACE PILLING, FUZZING OR MATTING - PART 3: RANDOM TUMBLE PILLING METHOD (ISO 12945-3:2014)
S.R. CEN/TS 12633:2014 METHOD OF POLISHING SPECIMENS PRIOR TO THE MEASUREMENT OF SLIP AND SKID RESISTANCE
ISO 11040-3:2012 Prefilled syringes — Part 3: Seals for dental local anaesthetic cartridges
ISO 9974-4:2016 Connections for general use and fluid power — Ports and stud ends with ISO 261 threads with elastomeric or metal-to-metal sealing — Part 4: Dimensions, design, test methods and requirements for external hex and internal hex port plugs
ISO 7175-2:1997 Children's cots and folding cots for domestic use Part 2: Test methods
CEI EN 50620 : 1ED 2017 ELECTRIC CABLES - CHARGING CABLES FOR ELECTRIC VEHICLES
ISO 6119:2006 Road vehicles Elastomeric seals for hydraulic disc brake cylinders using a non-petroleum base hydraulic brake fluid (Service temperature 120 degrees C max.)
EN 1340:2003/AC:2006 CONCRETE KERB UNITS - REQUIREMENTS AND TEST METHODS
PREN 15330-1 : DRAFT 2013 SURFACES FOR SPORTS AREAS - SYNTHETIC TURF AND NEEDLE-PUNCHED SURFACES PRIMARILY DESIGNED FOR OUTDOOR USE - PART 1: SPECIFICATION FOR SYNTHETIC TURF SURFACES FOR FOOTBALL, HOCKEY, RUGBY UNION TRAINING, TENNIS AND MULTI-SPORTS USE
ISO 6448:1985 Rubber seals Joint rings used for petroleum product supply pipes and fittings Specification for material
BS EN 15129:2009 Anti-seismic devices
NF EN 15807 : 2011 RAILWAY APPLICATIONS - PNEUMATIC HALF COUPLINGS
UNE-EN ISO 6149-4:2017 Connections for fluid power and general use - Ports and stud ends with ISO 261 metric threads and O-ring sealing - Part 4: Dimensions, design, test methods and requirements for external hex and internal hex port plugs (ISO 6149-4:2017)
10/30217325 DC : 0 BS EN 1339 - CONCRETE PAVING FLAGS - REQUIREMENTS AND TEST METHODS
UNI EN 15129 : 2009 ANTI-SEISMIC DEVICES
DIN EN 13071-1:2008-10 STATIONARY WASTE CONTAINERS UP TO 5000 L, TOP LIFTED BOTTOM EMPTIED - PART 1: GENERAL REQUIREMENTS
IEC 60502-2:2014 RLV Power cables with extruded insulation and their accessories for rated voltages from 1 kV (<em>U</em><sub>m</sub> = 1,2 kV) up to 30 kV (<em>U</em><sub>m</sub> = 36 kV) – Part 2: Cables for rated voltages from 6 kV (<em>U</em><sub>m</sub> = 7,2 kV) up to 30 kV (<em>U</em><sub>m</sub> = 36 kV)
SAE J 518/3 : 2015 HYDRAULIC FLANGE CLAMPS, 2-SCREW FLANGE CONNECTION TO BE USED WITH SAE J518-1, (CODE 61) CONNECTIONS WHERE ONLY LOW PRESSURE IS REQUIRED
ISO 9911:2006 Agricultural irrigation equipment Manually operated small plastics valves
EN 16837:2018 Surfaces for sports areas - Determination of linear shoe/surface friction
PREN 13036-4 : DRAFT 2009 METHOD FOR MEASUREMENT OF SLIP/SKID RESISTANCE OF SURFACE - PART 4: THE PENDULUM TEST
IEC 60840:2011 RLV Power cables with extruded insulation and their accessories for rated voltages above 30 kV (<em>U</em><sub>m</sub> = 36 kV) up to 150 kV (<em>U</em><sub>m</sub> = 170 kV) - Test methods and requirements
ISO 3601-1:2012 Fluid power systems — O-rings — Part 1: Inside diameters, cross-sections, tolerances and designation codes
ISO 9940:2015 Aerospace series Fluid, hydraulic, phosphate ester-base, fire resistant Technical specification
EN ISO 6149-4:2017 CONNECTIONS FOR FLUID POWER AND GENERAL USE - PORTS AND STUD ENDS WITH ISO 261 METRIC THREADS AND O-RING SEALING - PART 4: DIMENSIONS, DESIGN, TEST METHODS AND REQUIREMENTS FOR EXTERNAL HEX AND INTERNAL HEX PORT PLUGS (ISO 6149-4:2017)
EN ISO 28706-3:2018 Vitreous and porcelain enamels - Determination of resistance to chemical corrosion - Part 3: Determination of resistance to chemical corrosion by alkaline liquids using a hexagonal vessel or a tetragonal glass bottle (ISO 28706-3:2017)
IEC 61241-0:2004 Electrical apparatus for use in the presence of combustible dust - Part 0: General requirements
BS EN ISO 8434-1:2007 Metallic tube connections for fluid power and general use 24 degree cone connectors
IEC 60502-2 REDLINE : 3ED 2014 POWER CABLES WITH EXTRUDED INSULATION AND THEIR ACCESSORIES FOR RATED VOLTAGES FROM 1 KV (U[M] = 1,2 KV) UP TO 30 KV (U[M] = 36 KV) - PART 2: CABLES FOR RATED VOLTAGES FROM 6 KV (U[M] = 7,2 KV) UP TO 30 KV (U[M] = 36 KV)
ISO 9631:2018 Rubber seals — Joint rings for pipelines for hot-water supply up to 110 °C — Specification for the material
ISO 4930:2006 Road vehicles Elastomeric seals for hydraulic disc brake cylinders using a non-petroleum base hydraulic brake fluid (Service temperature 150 degrees C max.)
ISO 15082:2016 Road vehicles Tests for rigid plastic safety glazing materials
ISO 4632-1:1982 Rubber, vulcanized Classification Part 1: Description of the classification system
DIN EN 1063:2000-01 GLASS IN BUILDING - SECURITY GLAZING - TESTING AND CLASSIFICATION OF RESISTANCE AGAINST BULLET ATTACK
NF EN 1097-8 : 2009 TESTS FOR MECHANICAL AND PHYSICAL PROPERTIES OF AGGREGATES - PART 8: DETERMINATION OF THE POLISHED STONE VALUE
DIN EN 1344:2015-10 CLAY PAVERS - REQUIREMENTS AND TEST METHODS
DIN EN 12697-22:2013-12 (Draft) BITUMINOUS MIXTURES - TEST METHODS FOR HOT MIX ASPHALT - PART 22: WHEEL TRACKING
DIN EN ISO 19879 E : 2011 METALLIC TUBE CONNECTIONS FOR FLUID POWER AND GENERAL USE - TEST METHODS FOR HYDRAULIC FLUID POWER CONNECTIONS
DIN EN 3050:1998-07 AEROSPACE SERIES - O-RINGS, IN FLUOROCARBON RUBBER (FKM), LOW COMPRESSION SET - TECHNICAL SPECIFICATION
DIN EN 12697-38:2004-10 Bituminous mixtures - Test methods for hot mix asphalt - Part 38: Common equipment and calibration; German version EN 12697-38:2004
DIN EN 1337-3:2005-07 Structural bearings - Part 3: Elastomeric bearings
DIN EN 476:2011-04 General requirements for components used in drains and sewers
DIN EN 13036-4:2011-12 Road and airfield surface characteristics - Test methods - Part 4: Method for measurement of slip/skid resistance of a surface - The pendulum test; German version EN 13036-4:2011
DIN EN 14354:2005-03 WOOD-BASED PANELS - WOOD VENEER FLOOR COVERINGS
UNE-EN ISO 19879:2010 Metallic tube connections for fluid power and general use - Test methods for hydraulic fluid power connections (ISO 19879:2010)
BS EN 1344:2013 Clay pavers. Requirements and test methods
BS EN 12561-7:2011 Railway applications. Tank wagons Platforms and ladders
DIN EN ISO 8980-5:2005-10 Ophthalmic optics - Uncut finished spectacle lenses - Part 5: Minimum requirements for spectacle lens surfaces claimed to be abrasion-resistant (ISO 8980-5:2005)
BS EN 12272-3:2003 Surface dressing. Test methods Determination of binder aggregate adhesivity by the Vialit plate shock test method
UNE-EN 1344:2015 Clay pavers - Requirements and test methods
BS EN ISO 9974-1:2000 Connections for general use and fluid power. Ports and stud ends with ISO 261 threads with elastomeric or metal-to-metal sealing Threaded ports
BS EN 476:2011 General requirements for components used in drains and sewers
BS EN 356:2000 Glass in building. Security glazing. Testing and classification of resistance against manual attack
BS EN 14982 : 2006 PLASTICS PIPING AND DUCTING SYSTEMS - THERMOPLASTICS SHAFTS OR RISERS FOR INSPECTION CHAMBERS AND MANHOLES - DETERMINATION OF RING STIFFNESS
BS EN 13380:2001 General requirements for components used for renovation and repair of drain and sewer systems outside buildings
BS EN 12790:2009 Child use and care articles. Reclined cradles
BS EN 1727:1998 Domestic furniture. Storage furniture. Safety requirements and test methods
09/30206527 DC : 0 BS EN 60079-0 ED 6.0 - EXPLOSIVE ATMOSPHERES - PART 0: EQUIPMENT - GENERAL REQUIREMENTS
BS EN 13748-1 : 2004 TERRAZZO TILES - PART 1: TERRAZZO TILES FOR INTERNAL US
BS EN 438-2 : 2016 HIGH-PRESSURE DECORATIVE LAMINATES (HPL) - SHEETS BASED ON THERMOSETTING RESINS (USUALLY CALLED LAMINATES) - PART 2: DETERMINATION OF PROPERTIES
BS EN 14231:2003 Natural stone test methods. Determination of the slip resistance by means of the pendulum tester
BS EN 1288-5:2000 Glass in building. Determination of the bending strength of glass Coaxial double ring test on flat specimens with small test surface areas
DIN EN 681-1:2006-11 Elastomeric seals - Material requirements for pipe joint seals used in water and drainage applications - Part 1: Vulcanized rubber
I.S. EN 527-3:2003 OFFICE FURNITURE - WORK TABLES AND DESKS - PART 3: METHODS OF TEST FOR THE DETERMINATION OF THE STABILITY AND THE MECHANICAL STRENGTH OF THE STRUCTURE
I.S. EN 13036-4:2011 ROAD AND AIRFIELD SURFACE CHARACTERISTICS - TEST METHODS - PART 4: METHOD FOR MEASUREMENT OF SLIP/SKID RESISTANCE OF A SURFACE: THE PENDULUM TEST
I.S. EN ISO 8536-2:2010 INFUSION EQUIPMENT FOR MEDICAL USE - PART 2: CLOSURES FOR INFUSION BOTTLES
DIN EN 12697-20:2012-06 BITUMINOUS MIXTURES - TEST METHODS FOR HOT MIX ASPHALT - PART 20: INDENTATION USING CUBE OR CYLINDRICAL SPECIMENS (CY)
I.S. EN 12790:2009 CHILD USE AND CARE ARTICLES - RECLINED CRADLES
EN 15807:2011 Railway applications - Pneumatic half couplings
I.S. EN ISO 5470-1:2016 RUBBER- OR PLASTICS-COATED FABRICS - DETERMINATION OF ABRASION RESISTANCE - PART 1: TABER ABRADER (ISO 5470-1:2016)
I.S. EN 13541:2012 GLASS IN BUILDING - SECURITY GLAZING - TESTING AND CLASSIFICATION OF RESISTANCE AGAINST EXPLOSION PRESSURE
I.S. EN ISO 8980-4:2007 OPHTHALMIC OPTICS - UNCUT FINISHED SPECTACLE LENSES - PART 4: SPECIFICATIONS AND TEST METHODS FOR ANTI-REFLECTIVE COATINGS
I.S. EN ISO 4535:1999 VITREOUS AND PORCELAIN ENAMELS - APPARATUS FOR DETERMINATION OF RESISTANCE TO HOT DETERGENT SOLUTIONS USED FOR WASHING TEXTILES
DIN 53107:1982-05 DETERMINING THE SMOOTHNESS OF PAPER AND BOARD BY THE BEKK METHOD
DIN EN 14483-4:2004-09 VITREOUS AND PORCELAIN ENAMELS - DETERMINATION OF RESISTANCE TO CHEMICAL CORROSION - PART 4: DETERMINATION OF RESISTANCE TO CHEMICAL CORROSION BY ALKALINE LIQUIDS USING A CYLINDRICAL VESSEL
I.S. EN 14354:2017 WOOD-BASED PANELS - WOOD VENEER FLOOR COVERINGS
EN ISO 12945-3:2014 Textiles - Determination of the fabric propensity to surface pilling, fuzzing or matting - Part 3: Random tumble pilling method (ISO 12945-3:2014)
I.S. EN ISO 10432:2005 PETROLEUM AND NATURAL GAS INDUSTRIES - DOWNHOLE EQUIPMENT - SUBSURFACE SAFETY VALVE EQUIPMENT
I.S. EN 14241-1:2013 CHIMNEYS - ELASTOMERIC SEALS AND ELASTOMERIC SEALANTS - MATERIAL REQUIREMENTS AND TEST METHODS - PART 1: SEALS IN FLUE LINERS
I.S. EN ISO 19879:2010 METALLIC TUBE CONNECTIONS FOR FLUID POWER AND GENERAL USE - TEST METHODS FOR HYDRAULIC FLUID POWER CONNECTIONS
I.S. EN 12561-7:2011 RAILWAY APPLICATIONS - TANK WAGONS - PART 7: PLATFORMS AND LADDERS
I.S. EN 13787:2002 ELASTOMERS FOR GAS PRESSURE REGULATORS AND ASSOCIATED SAFETY DEVICES FOR INLET PRESSURES UP TO 100 BAR
DIN EN 13597:2008-04 Railway applications - Rubber suspension components - Rubber diaphragms for pneumatic suspension springs
I.S. EN 1130-2:1996 FURNITURE - CRIBS AND CRADLES FOR DOMESTIC USE - PART 2: TEST METHODS
DIN EN 13121-3:2016-10 GRP TANKS AND VESSELS FOR USE ABOVE GROUND - PART 3: DESIGN AND WORKMANSHIP
DIN EN 681-4:2006-11 Elastomeric seals - Material requirements for pipe joint seals used in water and drainage applications - Part 4: Cast polyurethane sealing elements
I.S. EN 3747:2007 AEROSPACE SERIES - O-RINGS, IN FLUOROSILICONE RUBBER (FVMQ) - TECHNICAL SPECIFICATION
DIN EN 858-1:2002-05 CONTINUOUS HANDLING EQUIPMENT AND SYSTEMS - PART 1: SAFETY AND EMC REQUIREMENTS FOR THE EQUIPMENT FOR THE STORAGE OF BULK MATERIALS IN SILOS, BUNKERS, BINS AND HOPPERS
I.S. EN 476:2011 GENERAL REQUIREMENTS FOR COMPONENTS USED IN DRAINS AND SEWERS
I.S. EN 1344:2013 CLAY PAVERS - REQUIREMENTS AND TEST METHODS
I.S. EN 14982:2006 PLASTICS PIPING AND DUCTING SYSTEMS - THERMOPLASTICS SHAFTS OR RISERS FOR INSPECTION CHAMBERS AND MANHOLES - DETERMINATION OF RING STIFFNESS
ISA 61241-0 : 2006 ELECTRICAL APPARATUS FOR USE IN ZONE 20, ZONE 21 AND ZONE 22 HAZARDOUS (CLASSIFIED) LOCATIONS - GENERAL REQUIREMENTS
I.S. EN ISO 6806:2017 RUBBER HOSES AND HOSE ASSEMBLIES FOR USE IN OIL BURNERS - SPECIFICATION (ISO 6806:2017)
DIN EN 681-2:2006-11 Elastomeric seals - Material requirements for pipe joint seals used in water and drainage applications - Part 2: Thermoplastic elastomers
DIN EN 14483-3:2004-09 VITREOUS AND PORCELAIN ENAMELS - DETERMINATION OF RESISTANCE TO CHEMICAL CORROSION - PART 3: DETERMINATION OF RESISTANCE TO CHEMICAL CORROSION BY ALKALINE LIQUIDS USING A HEXAGONAL VESSEL
UNI EN 13036-4 : 2011 ROAD AND AIRFIELD SURFACE CHARACTERISTICS - TEST METHODS - PART 4: METHOD FOR MEASUREMENT OF SLIP/SKID RESISTANCE OF A SURFACE: THE PENDULUM TEST
BS 903-A57:1997 Physical testing of rubber Determination of indentation hardness by means of pocket hardness meters
NF EN 476 : 2011 GENERAL REQUIREMENTS FOR COMPONENTS USED IN DRAINS AND SEWERS
BS 903-A16:1987 Physical testing of rubber Determination of the effect of liquids
BS 7442-3.1:1998 Rubber or plastics covered rollers. Method of test Determination of apparent hardness (IRHD method)
BS 1344-15:1997 Methods of testing vitreous enamel finishes Apparatus for testing with alkaline liquids
BS 4832:1987 Specification for compatibility between elastomeric materials and hydraulic fluids
VDI/VDE 2616 Blatt 2:2014-07 Hardness testing of plastics and elastomers
BS 903-A16(1999) : 1999 RUBBER, VULCANIZED - DETERMINATION OF THE EFFECT OF LIQUIDS
12/30234431 DC : 0 BS ISO 9940 - AEROSPACE - FIRE RESISTANT HYDRAULIC FLUIDS
BS EN 15807:2011 Railway applications. Pneumatic half couplings
BS ISO 5636-5:2013 Paper and board. Determination of air permeance (medium range) Gurley method
ISO 16936-3:2005 Glass in building — Forced-entry security glazing — Part 3: Test and classification by manual attack
I.S. EN ISO 8434-1:2007 METALLIC TUBE CONNECTIONS FOR FLUID POWER AND GENERAL USE - PART 1: 24 DEGREE CONE CONNECTORS
I.S. EN ISO 18082:2014 ANAESTHETIC AND RESPIRATORY EQUIPMENT - DIMENSIONS OF NON-INTERCHANGEABLE SCREW-THREADED (NIST) LOW-PRESSURE CONNECTORS FOR MEDICAL GASES (ISO 18082:2014/AMD 1:2017)
ISO 9475:1994 Aircraft inner tube and tubeless tyre valves Cores and caps Test methods
ISO 15717:1998 Kitchen equipment Safety requirements and test methods for kitchen cabinets and work tops
DIN EN ISO 10555-6 E : 2017 INTRAVASCULAR CATHETERS - STERILE AND SINGLE-USE CATHETERS - PART 6: SUBCUTANEOUS IMPLANTED PORTS (ISO 10555-6:2015)
BS ISO 16589-4:2011 Rotary shaft lip-type seals incorporating thermoplastic sealing elements Performance test procedures
UNI ISO 7619-2 : 2011 RUBBER, VULCANIZED OR THERMOPLASTIC - DETERMINATION OF INDENTATION HARDNESS - PART 2: IRHD POCKET METER METHOD
BS ISO 3387:2012 Rubber. Determination of crystallization effects by hardness measurements
14/30295535 DC : 0 BS ISO 5794-2 - RUBBER COMPOUNDING INGREDIENTS - SILICA, PRECIPITATED, HYDRATED - PART 2: EVALUATION PROCEDURES IN STYRENE-BUTADIENE RUBBER
13/30290592 DC : 0 BS EN 6111 - AEROSPACE SERIES - ETHYLENE-PROPYLENE ELASTOMER (EPM/EPDM) HARDNESS 80 IRHD FOR STATIC SEAL ELEMENTS IN HYDRAULIC SYSTEMS FOR LONG-TERM APPLICATION - MATERIAL STANDARD
03/118042 DC : DRAFT NOV 2003 EN 14840 - JOINT FILLERS AND SEALANTS - TEST METHODS FOR PREFORMED JOINT SEALS
14/30293841 DC : 0 BS ISO 16932 - GLASS IN BUILDING - DESTRUCTIVE-WINDSTORM-RESISTANT SECURITY GLAZING - TEST AND CLASSIFICATION
09/30199060 DC : 0 BS ISO 11926-2 - CONNECTIONS FOR GENERAL USE AND FLUID POWER - PORTS AND STUD ENDS WITH ISO 263 INCH THREADS AND O-RING SEALING - PART 2: HEAVY-DUTY (S SERIES) STUD ENDS
BS ISO 4195:2012 Conveyor belts with heat-resistant rubber covers. Heat resistance of covers. Requirements and test methods
DD ENV 1566-2:2001 Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure. Chlorinated poly(vinyl chloride) (PVC-C) Guidance for the assessment of conformity
DIN ISO 614:2015-12 SHIPS AND MARINE TECHNOLOGY - TOUGHENED SAFETY GLASS PANES FOR RECTANGULAR WINDOWS AND SIDE SCUTTLES - PUNCH METHOD OF NON-DESTRUCTIVE STRENGTH TESTING (ISO 614:2012)
07/30083514 DC : 0 BS EN ISO 21809-3 - PETROLEUM AND NATURAL GAS INDUSTRIES - EXTERNAL COATINGS FOR BURIED AND SUBMERGED PIPELINES USED IN PIPELINE TRANSPORTATION SYSTEMS - PART 3: FIELD JOINT COATINGS
BS F 157:2006 Properties of high tear strength silicone rubber sheet, mouldings and extrusions. Specification
UNE-EN ISO 28706-4:2016 Vitreous and porcelain enamels - Determination of resistance to chemical corrosion - Part 4: Determination of resistance to chemical corrosion by alkaline liquids using a cylindrical vessel (ISO 28706-4:2016)
BS F 162:2006 Properties of elastomeric toroidal sealing rings (\'O\' rings) manufactured from ethylene-propylene rubber material conforming to BS F 156. Specification
93/110634 DC : DRAFT DEC 1993 PREN 1345 - SPECIFICATION FOR CLAY PAVERS AND ACCESSORIES FOR RIGID PAVING
BS ISO 5636-6:2015 Paper and board. Determination of air permeance (medium range) Oken method
15/30317645 DC : 0 BS EN ISO 6806 - RUBBER HOSES AND HOSE ASSEMBLIES FOR USE IN OIL BURNERS - SPECIFICATION
17/30357747 DC : DRAFT AUG 2017 BS EN ISO 4007 - PERSONAL PROTECTIVE EQUIPMENT - EYE AND FACE PROTECTION - VOCABULARY
UNI EN 15807 : 2011 RAILWAY APPLICATIONS - PNEUMATIC HALF COUPLINGS
BS ISO 9211-4:2012 Optics and photonics. Optical coatings Specific test methods
UNE-ISO 5636-5:2015 Paper and board. Determination of air permeance (medium range). Part 5: Gurley method
BS C 22:1995 Test methods for aircraft inner tube and tubeless tyre valves. Cores and caps
14/30298583 DC : 0 BS EN 13121-3 - GRP TANKS AND VESSELS FOR USE ABOVE GROUND - PART 3: DESIGN AND WORKMANSHIP
DIN ISO 11040-2 E : 2012 PREFILLED SYRINGES - PART 2: PLUNGER STOPPERS FOR DENTAL LOCAL ANAESTHETIC CARTRIDGES (ISO 11040-2:2011)
ISO 1920-4:2005 Testing of concrete Part 4: Strength of hardened concrete
10/30219184 DC : 0 BS ISO 23936-2 - PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - NON-METALLIC MATERIALS IN CONTACT WITH MEDIA RELATED TO OIL AND GAS PRODUCTION - PART 2: ELASTOMERS
I.S. EN 14483-2:2004 VITREOUS AND PORCELAIN ENAMELS - DETERMINATION OF RESISTANCE TO CHEMICAL CORROSION - PART 2: DETERMINATION OF RESISTANCE TO CHEMICAL CORROSION BY BOILING ACIDS, NEUTRAL LIQUIDS AND/OR THEIR VAPOURS
BS EN ISO 28706-4:2016 Vitreous and porcelain enamels. Determination of resistance to chemical corrosion Determination of resistance to chemical corrosion by alkaline liquids using a cylindrical vessel
11/30234852 DC : 0 BS ISO 614 - SHIPS AND MARINE TECHNOLOGY - TOUGHENED SAFETY GLASS PANES FOR RECTANGULAR WINDOWS AND SIDE SCUTTLES - PUNCH METHOD OF NON-DESTRUCTIVE STRENGTH TESTING
16/30318232 DC : 0 BS ISO 4662 - RUBBER, VULCANIZED OR THERMOPLASTIC - DETERMINATION OF REBOUND RESILIENCE
00/716194 DC : DRAFT NOV 2000 PREN 14073-3 - OFFICE FURNITURE - STORAGE FURNITURE - PART 3: TEST METHOD FOR THE DETERMINATION OF STABILITY AND STRENGTH OF THE STRUCTURE REQUIREMENTS
BS EN 12274-5:2003 Slurry surfacing. Test methods Determination of wearing
ISO 10545-4:2014 Ceramic tiles Part 4: Determination of modulus of rupture and breaking strength
BS ISO 9974-4:2006 Connections for general use and fluid power. Ports and stud ends with ISO 261 threads with elastomeric or metal-to-metal sealing Dimensions, design, test methods and requirements for external hex and internal hex port plugs
BS ISO 6505:2015 Rubber, vulcanized or thermoplastic. Determination of tendency to adhere to and corrode metals
15/30317651 DC : 0 BS ISO 11424 - RUBBER HOSES AND TUBING FOR AIR AND VACUUM SYSTEMS FOR INTERNAL-COMBUSTION ENGINES - SPECIFICATION
00/560909 DC : DRAFT MAR 2000 BS ISO 8871-2 - ELASTOMERIC PARTS FOR PARENTERALS AND FOR DEVICES FOR PHARMACEUTICAL USE - PART 2: IDENTIFICATION AND CHARACTERIZATION
API 14A : 2015 SPECIFICATION FOR SUBSURFACE SAFETY VALVE EQUIPMENT
10/30196881 DC : 0 BS ISO 6072 - RUBBER - COMPATIBILITY BETWEEN HYDRAULIC FLUIDS AND STANDARD ELASTOMERIC MATERIALS
BS ISO 18869:2017 Hydraulic fluid power. Test methods for couplings actuated with or without tools
14/30296011 DC : 0 BS ISO 6505 - RUBBER, VULCANIZED OR THERMOPLASTIC - DETERMINATION OF TENDENCY TO ADHERE TO AND CORRODE METALS
PREN 13832-2 : DRAFT 2017 FOOTWEAR PROTECTING AGAINST CHEMICALS - PART 2: REQUIREMENTS FOR LIMITED CONTACT WITH CHEMICALS
DIN EN ISO 8362-2:2016-02 Injection containers and accessories - Part 2: Closures for injection vials (ISO 8362-2:2015)
NF EN 12274-5 : 2003 SLURRY SURFACING - TEST METHODS - PART 5: DETERMINATION OF WEARING
DIN ISO 8362-5:2011-06 INJECTION CONTAINERS AND ACCESSORIES - PART 5: FREEZE DRYING CLOSURES FOR INJECTION VIALS
BS 7796:1995 Specification for hydraulic fluid power. Four-screw split-flange connections for use at pressures of 2,5 MPa to 40 MPa (25 bar to 400 bar). Type 1 metric series and type 11 inch series
NF EN ISO 19879 : 2010 METALLIC TUBE CONNECTIONS FOR FLUID POWER AND GENERAL USE - TEST METHODS FOR HYDRAULIC FLUID POWER CONNECTIONS
06/30133250 DC : 0 BS EN 13071-1 - STATIONARY WASTE CONTAINERS UP TO 5000 L, TOP LIFTED BOTTOM EMPTIED - PART 1: GENERAL REQUIREMENTS
13/30279826 DC : 0 BS EN 15551 - RAILWAY APPLICATIONS - RAILWAY ROLLING STOCK - BUFFERS
ISO 4639-3:1995 Rubber tubing and hoses for fuel circuits for internal-combustion engines Specification Part 3: Oxidized fuels
ISO 1817:2015 Rubber, vulcanized or thermoplastic Determination of the effect of liquids
BS ISO 3537:2015 Road vehicles. Safety glazing materials. Mechanical tests
03/106442 DC : DRAFT APR 2003 ISO 4925 - ROAD VEHICLES - SPECIFICATION FOR NON-PETROLEUM BASE FLUIDS FOR HYDRAULIC SYSTEMS
DD ENV 1519-2:2001 Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure. Polyethylene (PE) Guidance for the assessment of conformity
BS EN ISO 8362-5:2016 Injection containers and accessories Freeze drying closures for injection vials
NF EN 60068 2-32 : 1994 BASIC ENVIRONMENTAL TESTING PROCEDURES - PART 2: TESTS - TEST ED: FREE FALL
09/30207051 DC : 0 BS EN 13036-4 - METHOD FOR MEASUREMENT OF SLIP/SKID RESISTANCE OF SURFACE - PART 4: THE PENDULUM TEST
10/30192933 DC : 0 BS ISO 6356 - TEXTILE FLOOR COVERINGS - ASSESSMENT OF STATIC ELECTRICAL PROPENSITY - WALKING TEST
BIS IS 3400-4 : 2012 METHODS OF TEST FOR VULCANIZED RUBBER - PART 4: ACCELERATED AGEING AND HEAT RESISTANCE
07/30046986 DC : DRAFT AUG 2007 BS ISO 1288-2 - GLAZING IN BUILDING - DETERMINATION OF THE BENDING STRENGTH OF GLASS - PART 2: COAXIAL DOUBLE-RING REST ON FLAT SPECIMENS WITH LARGE TEST SURFACE AREAS
ISO 7267-1:2017 Rubber-covered rollers Determination of apparent hardness Part 1: IRHD method
UNI ISO 8434-6 : 2012 METALLIC TUBE CONNECTIONS FOR FLUID POWER AND GENERAL USE - PART 6: 60 DEGREE CONE CONNECTORS WITH OR WITHOUT O-RING
12/30254122 DC : 0 BS EN 1466 - CHILD USE AND CARE ARTICLES - CARRY COTS AND STANDS - SAFETY REQUIREMENTS AND TEST METHODS
04/30112025 DC : DRAFT APR 2004 ISO 16010 - ELASTOMERIC SEALS - MATERIAL REQUIREMENTS FOR SEALS USED IN PIPES AND FITTINGS CARRYING GAS AND HYDROCARBON FLUIDS
BS ISO 6117:2005 Road vehicles. Elastomeric boots for drum-type, hydraulic brake wheel cylinders using a non-petroleum base hydraulic brake fluid (service temperature 100 °C max.)
BS ISO 6072:2011 Rubber. Compatibility between hydraulic fluids and standard elastomeric materials
17/30355087 DC : 0 BS ISO 13226 - RUBBER - STANDARD REFERENCE ELASTOMERS (SRES) FOR CHARACTERIZING THE EFFECT OF LIQUIDS ON VULCANIZED RUBBERS
UNI CEN/TS 15901-7 : 2010 ROAD AND AIRFIELD SURFACE CHARACTERISTICS - PART 7: PROCEDURE FOR DETERMINING THE SKID RESISTANCE OF A PAVEMENT SURFACE USING A DEVICE WITH LONGITUDINAL FIXED SLIP RATIO (LFCG): THE GRIPTESTER
BS F 159:2006 Properties of elastomeric toroidal sealing rings (\'O\' rings) manufactured from oil resistant silicone rubber material conforming to BS F 153. Specification
ISO 1288-2:2016 Glass in building — Determination of the bending strength of glass — Part 2: Coaxial double-ring test on flat specimens with large test surface areas
10/30217322 DC : 0 BS EN 1338 - CONCRETE PAVING BLOCKS - REQUIREMENTS AND TEST METHODS
02/121978 DC : DRAFT APR 2002 ISO/DIS 23711 - ELASTOMERIC SEALS - REQUIREMENTS FOR MATERIALS FOR PIPE JOINT SEALS USED IN WATER AND DRAINAGE APPLICATIONS - THERMOPLASTIC ELASTOMERS
04/30123137 DC : DRAFT SEP 2004 EN 14982 - RING STIFFNESS - PLASTICS PIPING SYSTEMS - PLASTICS SHAFTS OR RISERS FOR INSPECTION CHAMBERS AND MANHOLES - DETERMINATION OF RING STIFFNESS
07/30161675 DC : 0 BS ISO 24454 - PHYSICAL TESTING OF RUBBER - ACQUISITION AND PRESENTATION OF COMPARABLE MULTI-POINT DATA
BS EN 60512-7-1:2010 Connectors for electronic equipment. Tests and measurements Impact tests (free connectors). Test 7a. Free fall (repeated)
BS ISO 7267-1:2017 Rubber-covered rollers. Determination of apparent hardness IRHD method
15/30316981 DC : DRAFT FEB 2015 BS EN 16837 - SURFACES FOR SPORTS AREAS - DETERMINATION OF LINEAR SHOE/SURFACE FRICTION
BS 903-4:2003 Physical testing of rubber Acquisition and presentation of comparable multi-point data
ISO 4007:2012 Personal protective equipment Eye and face protection Vocabulary
BS EN 50014:1998 Electrical apparatus for potentially explosive atmospheres. General requirements
04/30095733 DC : DRAFT APR 2004 EN 13832-4 - FOOTWEAR PROTECTING AGAINST CHEMICALS AND MICRO-ORGANISMS - PART 4: FOOTWEAR PROTECTIVE AGAINST MICRO-ORGANISMS
ONORM EN ISO 19879 : 2010 METALLIC TUBE CONNECTIONS FOR FLUID POWER AND GENERAL USE - TEST METHODS FOR HYDRAULIC FLUID POWER CONNECTIONS
DIN EN 549:1995-04 RUBBER MATERIALS FOR SEALS AND DIAPHRAGMS FOR GAS APPLIANCES AND GAS EQUIPMENT
17/30347025 DC : 0 BS EN 15129 - ANTI-SEISMIC DEVICES
EN 438-2:2016 High-pressure decorative laminates (HPL) - Sheets based on thermosetting resins (usually called laminates) - Part 2: Determination of properties
DIN EN ISO 12311:2015-06 Personal protective equipment - Test methods for sunglasses and related eyewear (ISO 12311:2013, Corrected version 2014-08-15); German version EN ISO 12311:2013
UNE-EN 15807:2011 Railway applications - Pneumatic half couplings
NF ISO 6072 : 2012 RUBBER - COMPATIBILITY BETWEEN HYDRAULIC FLUIDS AND STANDARD ELASTOMERIC MATERIALS
ISO 13226:2011 Rubber Standard reference elastomers (SREs) for characterizing the effect of liquids on vulcanized rubbers
DIN ISO 3302-1:2016-10 (Draft) RUBBER - TOLERANCES FOR PRODUCTS - PART 1: DIMENSIONAL TOLERANCES
I.S. EN 60544-2:2012 ELECTRICAL INSULATING MATERIALS - DETERMINATION OF THE EFFECTS OF IONIZING RADIATION ON INSULATING MATERIALS - PART 2: PROCEDURES FOR IRRADIATION AND TEST (IEC 60544-2:2012 (EQV))
API SPEC 17K : 2017 SPECIFICATION FOR BONDED FLEXIBLE PIPE
BS ISO 11424:2017 Rubber hoses and tubing for air and vacuum systems for internal-combustion engines. Specification
I.S. EN 50508:2009 MULTI-PURPOSE INSULATING STICKS FOR ELECTRICAL OPERATIONS ON HIGH VOLTAGE INSTALLATIONS
I.S. EN ISO 12311:2013 PERSONAL PROTECTIVE EQUIPMENT - TEST METHODS FOR SUNGLASSES AND RELATED EYEWEAR (ISO 12311:2013, CORRECTED VERSION 2014-08-15)
DIN EN 13832-3:2006-11 FOOTWEAR PROTECTING AGAINST CHEMICALS - PART 3: REQUIREMENTS FOR FOOTWEAR HIGHLY RESISTANT TO CHEMICALS UNDER LABORATORY CONDITIONS
CSA E60079.0 : 2002 ELECTRICAL APPARATUS FOR EXPLOSIVE GAS ATMOSPHERES - GENERAL REQUIREMENTS
BS EN 13832-2:2006 Footwear protecting against chemicals Requirements for footwear resistant to chemicals under laboratory conditions
ISO 24338:2014 Laminate floor coverings Determination of abrasion resistance
BS EN 13121-3:2016 GRP tanks and vessels for use above ground Design and workmanship
ISO 4639-1:1987 Rubber tubing and hoses for fuel circuits for internal combustion engines Specification Part 1: Conventional liquid fuels
ISO 9553:1997 Solar energy — Methods of testing preformed rubber seals and sealing compounds used in collectors
UNI ISO 7619-1 : 2011 RUBBER, VULCANIZED OR THERMOPLASTIC - DETERMINATION OF INDENTATION HARDNESS - PART 1: DUROMETER METHOD (SHORE HARDNESS)
I.S. EN 61230:2008 LIVE WORKING - PORTABLE EQUIPMENT FOR EARTHING OR EARTHING AND SHORT-CIRCUITING
I.S. EN 438-2:2016 HIGH-PRESSURE DECORATIVE LAMINATES (HPL) - SHEETS BASED ON THERMOSETTING RESINS (USUALLY CALLED LAMINATES) - PART 2: DETERMINATION OF PROPERTIES
I.S. ISO 1817:1986 RUBBER, VULCANIZED - DETERMINATION OF THE EFFECT OF LIQUIDS
UNE-EN 16084:2011 Refrigerating systems and heat pumps - Qualification of tightness of components and joints
UNI EN ISO 4007 : 2012 PERSONAL PROTECTIVE EQUIPMENT - EYE AND FACE PROTECTION - VOCABULARY
ISO 2733:1983 Vitreous and porcelain enamels Apparatus for testing with acid and neutral liquids and their vapours
EN ISO 13260:2011/A1:2017 Thermoplastics piping systems for non-pressure underground drainage and sewerage - Test method for resistance to combined temperature cycling and external loading - Amendment 1 (ISO 13260:2010/Amd 1:2017)
I.S. EN 279:1992 HOMOGENOUS RUBBER MATERIALS FOR DYNAMIC SEALS IN DOMESTIC APPLIANCES USING COMBUSTIBLE GASES UP TO 200 MBAR
I.S. EN 15551:2017 RAILWAY APPLICATIONS - RAILWAY ROLLING STOCK - BUFFERS
BS EN ISO 10545-4:2014 Ceramic tiles Determination of modulus of rupture and breaking strength
UNE-EN 13121-3:2017 GRP tanks and vessels for use above ground - Part 3: Design and workmanship
UNI EN ISO 8434-1 : 2007 METALLIC TUBE CONNECTIONS FOR FLUID POWER AND GENERAL USE - PART 1: 24 DEGREE CONE CONNECTORS
ISO 6164:1994 Hydraulic fluid power Four-screw, one-piece square-flange connections for use at pressures of 25 MPa and 40 MPa (250 bar and 400 bar)
ISO 18797-1:2016 Petroleum, petrochemical and natural gas industries — External corrosion protection of risers by coatings and linings — Part 1: Elastomeric coating systems-polychloroprene or EPDM
PREN 15566 : DRAFT 2013 RAILWAY APPLICATIONS - RAILWAY ROLLING STOCK - DRAW GEAR AND SCREW COUPLING
SAE J 518/2 : 2017 HYDRAULIC FLANGED TUBE, PIPE, AND HOSE CONNECTIONS, 4-SCREW FLANGE CONNECTION - PART 2: 42 MPA (CODE 62)
BS EN 13071-1:2008 Stationary waste containers up to 5000 l, top lifted and bottom emptied General requirements
UNI EN ISO 9117-6 : 2012 PAINTS AND VARNISHES - DRYING TESTS - PART 6: PRINT-FREE TEST
NF EN 60068 2-31 : 2008 ENVIRONMENTAL TESTING - PART 2-31: TESTS - TEST EC: ROUGH HANDLING SHOCKS, PRIMARILY FOR EQUIPMENT-TYPE SPECIMENS
BS EN ISO 10555-6:2017 Intravascular catheters. Sterile and single-use catheters Subcutaneous implanted ports
S.R. CEN/TS 15901-8:2009 ROAD AND AIRFIELD SURFACE CHARACTERISTICS - PART 8: PROCEDURE FOR DETERMINING THE SKID RESISTANCE OF A PAVEMENT SURFACE BY MEASUREMENT OF THE SIDEWAY-FORCE COEFFICIENT (SFCD): SKM
S.R. CEN/TS 15901-4:2009 ROAD AND AIRFIELD SURFACE CHARACTERISTICS - PART 4: PROCEDURE FOR DETERMINING THE SKID RESISTANCE OF PAVEMENTS USING A DEVICE WITH LONGITUDINAL CONTROLLED SLIP (LFCT): TATRA RUNWAY TESTER (TRT)
BIS IS/ISO 6194-1 : 2007 ROTARY SHAFT LIP-TYPE SEALS INCORPORATING ELASTOMERIC SEALING ELEMENTS - PART 1: NOMINAL DIMENSIONS AND TOLERANCES
ISO 16935:2007 Glass in building — Bullet-resistant security glazing — Test and classification
ISO 7267-3:2017 Rubber-covered rollers Determination of apparent hardness Part 3: Pusey and Jones method
ISO 6194-4:2009 Rotary shaft lip-type seals incorporating elastomeric sealing elements Part 4: Performance test procedures
EN ISO 10545-4:2014 Ceramic tiles - Part 4: Determination of modulus of rupture and breaking strength (ISO 10545-4:2014)
ISO 16934:2007 Glass in building — Explosion-resistant security glazing — Test and classification by shock-tube loading
ISO 6505:2015 Rubber, vulcanized or thermoplastic Determination of tendency to adhere to and corrode metals
ISO 4633:2015 Rubber seals — Joint rings for water supply, drainage and sewerage pipelines — Specification for materials
ISO 8434-6:2009 Metallic tube connections for fluid power and general use — Part 6: 60 degree cone connectors with or without O-ring
EN 13832-2:2006 Footwear protecting against chemicals - Part 2: Requirements for footwear resistant to chemicals under laboratory conditions
ISO 16936-1:2005 Glass in building — Forced-entry security glazing — Part 1: Test and classification by repetitive ball drop
ISO 16010:2005 Elastomeric seals Material requirements for seals used in pipes and fittings carrying gaseous fuels and hydrocarbon fluids
DIN EN ISO 8871-2:2014-08 ELASTOMERIC PARTS FOR PARENTERALS AND FOR DEVICES FOR PHARMACEUTICAL USE - PART 2: IDENTIFICATION AND CHARACTERIZATION (ISO 8871-2:2003 + AMD.1:2005)
ISO 6447:1983 Rubber seals Joint rings used for gas supply pipes and fittings Specification for material
I.S. EN 13329:2016 LAMINATE FLOOR COVERINGS - ELEMENTS WITH A SURFACE LAYER BASED ON AMINOPLASTIC THERMOSETTING RESINS - SPECIFICATIONS, REQUIREMENTS AND TEST METHODS
ISO 614:2012 Ships and marine technology — Toughened safety glass panes for rectangular windows and side scuttles — Punch method of non-destructive strength testing
ISO 4195-1:1987 Conveyor belts — Heat resistance — Part 1: Test method
ISO 10555-6:2015 Intravascular catheters Sterile and single-use catheters Part 6: Subcutaneous implanted ports
I.S. EN 15566:2016 RAILWAY APPLICATIONS - RAILWAY ROLLING STOCK - DRAW GEAR AND SCREW COUPLING
IEC 60092-351:2004 Electrical installations in ships - Part 351: Insulating materials for shipboard and offshore units, power, control, instrumentation, telecommunication and data cables
ISO 8536-6:2016 Infusion equipment for medical use — Part 6: Freeze drying closures for infusion bottles
DIN EN 12790:2009-07 Child use and care articles - Reclined cradles
DIN EN 14982 E : 2011 PLASTICS PIPING AND DUCTING SYSTEMS - THERMOPLASTICS SHAFTS OR RISERS FOR INSPECTION CHAMBERS AND MANHOLES - DETERMINATION OF RING STIFFNESS
DIN EN 14188-3:2006-04 Joint fillers and sealants - Part 3: Specifications for preformed joint seals
DIN EN 13748-1:2005-08 TERRAZZO TILES - PART 1: TERRAZZO TILES FOR INTERNAL USE
EN 61518:2001/corrigendum:2002 MATING DIMENSIONS BETWEEN DIFFERENTIAL PRESSURE (TYPE) MEASURING INSTRUMENTS AND FLANGED-ON SHUT-OFF DEVICES UP TO 413 BAR (41,3 MPA)
DIN EN 681-1:2016-07 (Draft) Elastomeric seals - Material requirements for pipe joint seals used in water and drainage applications - Part 1: Vulcanized rubber; German and English version prEN 681-1:2016
DIN EN 1097-8:2016-07 (Draft) TESTS FOR MECHANICAL AND PHYSICAL PROPERTIES OF AGGREGATES - PART 8: DETERMINATION OF THE POLISHED STONE VALUE
DIN EN 682:2006-10 Elastomeric seals - Material requirements for seals used in pipes and fittings carrying gas and hydrocarbon fluids
DIN EN 1337-3 E : 2005 STRUCTURAL BEARINGS - PART 3: ELASTOMERIC BEARINGS
DIN EN 1288-2:2000-09 GLASS IN BUILDING - DETERMINATION OF THE BENDING STRENGTH OF GLASS - PART 2: COAXIAL DOUBLE RING TEST ON FLAT SPECIMENS WITH LARGE TEST SURFACE AREAS
DIN EN 14382:2016-05 (Draft) SAFETY DEVICES FOR GAS PRESSURE REGULATING STATIONS AND INSTALLATIONS - GAS SAFETY SHUT-OFF DEVICES FOR INLET PRESSURES UP TO 100 BAR
BS EN 681-4:2000 Elastomeric seals. Material requirements for pipe joint seals used in water and drainage applications Cast polyurethane sealing elements
EN 1097-8:2009 Tests for mechanical and physical properties of aggregates - Part 8: Determination of the polished stone value
ISO 28706-4:2016 Vitreous and porcelain enamels — Determination of resistance to chemical corrosion — Part 4: Determination of resistance to chemical corrosion by alkaline liquids using a cylindrical vessel
ISO 3822-4:1997 Acoustics Laboratory tests on noise emission from appliances and equipment used in water supply installations Part 4: Mounting and operating conditions for special appliances
ISO 12311:2013 Personal protective equipment — Test methods for sunglasses and related eyewear
BS EN 1051-1:2003 Glass in building. Glass blocks and glass pavers Definitions and description
BS EN 14483-3:2004 Vitreous and porcelain enamels. Determination of resistance to chemical corrosion Determination of resistance to chemical corrosion by alkaline liquids using a hexagonal vessel
BS EN 13213:2001 Hollow floors
ISO 6806:2017 Rubber hoses and hose assemblies for use in oil burners — Specification
ISO 8434-4:1995 Metallic tube connections for fluid power and general use Part 4: 24 degree cone connectors with O-ring weld-on nipples
ISO 868:2003 Plastics and ebonite — Determination of indentation hardness by means of a durometer (Shore hardness)
EN ISO 8871-2:2004/A1:2014 ELASTOMERIC PARTS FOR PARENTERALS AND FOR DEVICES FOR PHARMACEUTICAL USE - PART 2: IDENTIFICATION AND CHARACTERIZATION (ISO 8871-2:2003/AMD 1:2005)
ONORM EN 1097-8 : 2011 TESTS FOR MECHANICAL AND PHYSICAL PROPERTIES OF AGGREGATES - PART 8: DETERMINATION OF THE POLISHED STONE VALUE
OVE/ONORM E 8200-605 : 2009 ELECTRIC CABLES - ADDITIONAL TEST METHODS
I.S. EN ISO 8871-2:2004 ELASTOMERIC PARTS FOR PARENTERALS AND FOR DEVICES FOR PHARMACEUTICAL USE - PART 2: IDENTIFICATION AND CHARACTERIZATION (ISO 8871-2:2003)
EN ISO 9117-5:2012 Paints and varnishes - Drying tests - Part 5: Modified Bandow-Wolff test (ISO 9117-5:2012)
EN 14354:2017 Wood-based panels - Wood veneer floor coverings
EN ISO 6149-3:2007 Connections for hydraulic fluid power and general use - Ports and stud ends with ISO 261 metric threads and O-ring sealing - Part 3: Dimensions, design, test methods and requirements for light-duty (L series) stud ends (ISO 6149-3:2006)
UNI EN 15330-1 : 2013 SURFACES FOR SPORTS AREAS - SYNTHETIC TURF AND NEEDLE-PUNCHED SURFACES PRIMARILY DESIGNED FOR OUTDOOR USE - PART 1: SPECIFICATION FOR SYNTHETIC TURF SURFACES FOR FOOTBALL, HOCKEY, RUGBY UNION TRAINING, TENNIS AND MULTI-SPORTS USE
BS 1970:2006 Hot water bottles manufactured from rubber and PVC. Specification
UNI EN 14982 : 2010 PLASTICS PIPING AND DUCTING SYSTEMS - THERMOPLASTICS SHAFTS OR RISERS FOR INSPECTION CHAMBERS AND MANHOLES - DETERMINATION OF RING STIFFNESS
ONORM EN 476 : 2011 GENERAL REQUIREMENTS FOR COMPONENTS USED IN DRAINS AND SEWERS
UNI EN ISO 10545-4 : 2014 CERAMIC TILES - PART 4: DETERMINATION OF MODULUS OF RUPTURE AND BREAKING STRENGTH
EN ISO 10432:2004 Petroleum and natural gas industries - Downhole equipment - Subsurface safety valve equipment (ISO 10432:2004)
UNI EN ISO 8536-2 : 2010 INFUSION EQUIPMENT FOR MEDICAL USE - PART 2: CLOSURES FOR INFUSION BOTTLES
UNI EN 13541 : 2012 GLASS IN BUILDING - SECURITY GLAZING - TESTING AND CLASSIFICATION OF RESISTANCE AGAINST EXPLOSION PRESSURE
UNI EN 1344 : 2013 CLAY PAVERS - REQUIREMENTS AND TEST METHODS
UNI EN 14241-1 : 2013 CHIMNEYS - ELASTOMERIC SEALS AND ELASTOMERIC SEALANTS - MATERIAL REQUIREMENTS AND TEST METHODS - PART 1: SEALS IN FLUE LINERS
UNI EN 476 : 2011 GENERAL REQUIREMENTS FOR COMPONENTS USED IN DRAINS AND SEWERS
UNI EN 1340 : 2004 CONCRETE KERB UNITS - REQUIREMENTS AND TEST METHODS
UNI EN 14382 : 2009 SAFETY DEVICES FOR GAS PRESSURE REGULATING STATIONS AND INSTALLATIONS - GAS SAFETY SHUT-OFF DEVICES FOR INLET PRESSURES UP TO 100 BAR
UNI EN 1338 : 2004 CONCRETE PAVING BLOCKS - REQUIREMENTS AND TEST METHODS
UNI CEN/TS 15901-8 : 2010 Road and airfield surface characteristics - Part 8: Procedure for determining the skid resistance of a pavement surface by measurement of the sideway-force coefficient (SFCD): SKM
UNI EN 12790 : 2009 CHILD USE AND CARE ARTICLES - RECLINED CRADLES
UNI EN 12561-7 : 2011 RAILWAY APPLICATIONS - TANK WAGONS - PART 7: PLATFORMS AND LADDERS
BS 1755-1:1982 Glossary of terms used in the plastics industry Polymer and plastics technology
UNI EN 1339 : 2005 CONCRETE PAVING FLAGS - REQUIREMENTS AND TEST METHODS
UNE-ISO 7619-1:2011 Rubber, vulcanized or thermoplastic -- Determination of indentation hardness -- Part 1: Durometer method (Shore hardness)
BS 3900-C8(1978) : 1978 AMD 8613 METHODS OF TEST FOR PAINTS - TESTS ASSOCIATED WITH PAINT FILM FORMATION - PRINT-FREE TEST
ISO 14949:2001 Implants for surgery — Two-part addition-cure silicone elastomers
I.S. EN 15807:2011 RAILWAY APPLICATIONS - PNEUMATIC HALF COUPLINGS
07/30169170 DC : 0 BS ISO 28706-4 - VITREOUS AND PORCELAIN ENAMELS - DETERMINATION OF RESISTANCE TO CHEMICAL CORROSION - PART 4: DETERMINATION OF RESISTANCE TO CHEMICAL CORROSION BY ALKALINE LIQUIDS USING A CYLINDRICAL VESSEL
16/30338249 DC : 0 BS EN 12274-4 - SLURRY SURFACING - TEST METHODS - PART 4: DETERMINATION OF COHESION OF THE MIX
UNI CEN/TS 15676 : 2008 WOOD FLOORING - SLIP RESISTANCE - PENDULUM TEST
DIN EN 50014 : 2000 ELECTRICAL APPARATUS FOR POTENTIALLY EXPLOSIVE ATMOSPHERES - GENERAL REQUIREMENTS
17/30353012 DC : 0 BS ISO 13926-2 - PEN SYSTEMS - PART 2: PLUNGER STOPPERS FOR PEN-INJECTORS FOR MEDICAL USE
ISO 19662:2018 Milk — Determination of fat content — Acido-butyrometric (Gerber method)
BS ISO 14949:2001 Implants for surgery. Two-part addition-cure silicone elastomers
UNI CEN/TS 15901-6 : 2010 ROAD AND AIRFIELD SURFACE CHARACTERISTICS - PART 6: PROCEDURE FOR DETERMINING THE SKID RESISTANCE OF A PAVEMENT SURFACE BY MEASUREMENT OF THE SIDEWAY FORCE COEFFICIENT (SFCS): SCRIM
BS ISO 9940:2015 Aerospace series. Fluid, hydraulic, phosphate ester-base, fire resistant. Technical specification
00/560161 DC : DRAFT JAN 2000 BS ISO 11040-5 - PRE-FILLED SYRINGES - PART 5: PLUNGERS FOR INJECTABLES
05/30138125 DC : DRAFT AUG 2005 ISO 9911 - AGRICULTURAL IRRIGATION EQUIPMENT - MANUALLY OPERATED SMALL PLASTICS VALVES
15/30317619 DC : 0 BS EN ISO 5470-1 - RUBBER- OR PLASTICS-COATED FABRICS - DETERMINATION OF ABRASION RESISTANCE - PART 1: TABER ABRADER
BS ISO 5794-3:2011 Rubber compounding ingredients. Silica, precipitated, hydrated Evaluation procedures in a blend of solution styrene-butadiene rubber (S-SBR) and butadiene rubber (BR)
11/30246635 DC : 0 BS EN ISO 10545-4 - CERAMIC TILES - PART 4: DETERMINATION OF MODULUS OF RUPTURE AND BREAKING STRENGTH
BS EN 60544-4:2003 Electrical insulating materials. Determination of the effects of ionizing radiation Classification system for service in radiation environments
I.S. EN 13071:2002 SELECTIVE WASTE COLLECTION CONTAINERS - ABOVE-GROUND MECHANICALLY-LIFTED CONTAINERS WITH CAPACITIES FROM 80 L TO 5000 L FOR SELECTIVE COLLECTION OF WASTE
06/30117784 DC : DRAFT JAN 2006 ISO 12046 - SYNCHRONOUS BELT DRIVES - AUTOMOTIVE BELTS - DETERMINATION OF PHYSICAL PROPERTIES
11/30212464 DC : 0 BS ISO 18898 - RUBBER - CALIBRATION AND VERIFICATION OF HARDNESS TESTERS
13/30278095 DC : 0 BS EN ISO 10545-4 - CERAMIC TILES - PART 4: DETERMINATION OF MODULUS OF RUPTURE AND BREAKING STRENGTH
DIN EN ISO 28706-2:2016-04 (Draft) VITREOUS AND PORCELAIN ENAMELS - DETERMINATION OF RESISTANCE TO CHEMICAL CORROSION - PART 2: DETERMINATION OF RESISTANCE TO CHEMICAL CORROSION BY BOILING ACIDS, BOILING NEUTRAL LIQUIDS, ALKALINE LIQUIDS AND/OR THEIR VAPOURS (ISO 28706-2:2017)
I.S. EN 12227-2:2000 PLAYPENS FOR DOMESTIC USE - PART 2: TEST METHODS
BS ISO 13268:2010 Thermoplastics piping systems for non-pressure underground drainage and sewerage. Thermoplastics shafts or risers for inspection chambers and manholes. Determination of ring stiffness
07/30171274 DC : 0 BS EN ISO 14439 - GLASS IN BUILDING - ASSEMBLY RULES - GLAZING WEDGES
ISO 3537:2015 Road vehicles Safety glazing materials Mechanical tests
06/30145464 DC : 0 EN 13696 - WOOD FLOORING (INCLUDING PARQUET) - TEST METHOD TO DETERMINE ELASTICITY AND RESISTANCE TO WEAR
09/30198118 DC : 0 BS ISO 13260 - THERMOPLASTICS PIPING SYSTEMS FOR NON-PRESSURE UNDERGROUND DRAINAGE AND SEWERAGE - TEST METHOD FOR RESISTANCE TO COMBINED TEMPERATURE CYCLING AND EXTERNAL LOADING
11/30219041 DC : DRAFT APR 2011 BS ISO 14903 - REFRIGERATING SYSTEMS AND HEAT PUMPS - QUALIFICATION OF TIGHTNESS OF COMPONENTS AND JOINTS
DIN ISO 15759:2006-05 Medical infusion equipment - Plastics caps with inserted elastomeric liner for containers manufactured by the blow-fill-seal (BFS) process (ISO 15759:2005)
ISO 16589-4:2011 Rotary shaft lip-type seals incorporating thermoplastic sealing elements — Part 4: Performance test procedures
DIN EN 15551 E : 2011 RAILWAY APPLICATIONS - RAILWAY ROLLING STOCK - BUFFERS
10/30195690 DC : 0 BS EN 13832-3 - FOOTWEAR PROTECTING AGAINST CHEMICALS - PART 3: REQUIREMENTS FOR FOOTWEAR HIGHLY RESISTANT TO CHEMICALS UNDER LABORATORY CONDITIONS
I.S. EN ISO 8434-4:2000 METALLIC TUBE CONNECTIONS FOR FLUID POWER AND GENERAL USE - PART 4: 24 DEGREE CONE CONNECTORS WITH O-RING WELD-ON NIPPLES
BS ISO 4930:2006 Road vehicles. Elastomeric seals for hydraulic disc brake cylinders using a non-petroleum base hydraulic brake fluid (service temperature 150°C max.)
BS 1344-19(1984) : AMD 10426 METHODS OF TESTING VITREOUS ENAMEL FINISHES - APPARATUS FOR DETERMINATION OF RESISTANCE TO HOT DETERGENT SOLUTIONS USED FOR WASHING TEXTILES
BS EN ISO 23936-2:2011 Petroleum, petrochemical and natural gas industries. Nonmetallic materials in contact with media related to oil and gas production Elastomers
UNI ISO 188 : 2012 RUBBER, VULCANIZED OR THERMOPLASTIC - ACCELERATED AGEING AND HEAT RESISTANCE TESTS
BS F 153:2006 Properties of oil resistant silicone rubber sheet, mouldings and extrusions. Specification
07/30046990 DC : DRAFT AUG 2007 BS ISO 1288-3 - GLAZING IN BUILDING - DETERMINATION OF THE BENDING STRENGTH OF GLASS - PART 3: TEST WITH SPECIMEN SUPPORTED AT TWO POINTS (FOUR POINT BENDING)
14/30293850 DC : 0 BS ISO 29584 - GLASS IN BUILDING - PENDULUM IMPACT TESTING AND CLASSIFICATION OF SAFETY GLASS
DD CEN/TS 15901-7:2009 Road and airfield surface characteristics Procedure for determining the skid resistance of a pavement surface using a device with longitudinal fixed slip ratio (LFCG). The GripTester®
DD ENV 12633:2003 Method of determination of unpolished and polished slip/skid resistance value
14/30304354 DC : 0 BS EN ISO 8362-5 - INJECTION CONTAINERS AND ACCESSORIES - PART 5: FREEZE DRYING CLOSURES FOR INJECTION VIALS
BS EN 60068-2-31:2008 Environmental testing Tests. Test Ec. Rough handling shocks, primarily for equipment-type specimens
I.S. EN 14483-3:2004 VITREOUS AND PORCELAIN ENAMELS - DETERMINATION OF RESISTANCE TO CHEMICAL CORROSION - PART 3: DETERMINATION OF RESISTANCE TO CHEMICAL CORROSION BY ALKALINE LIQUIDS USING A HEXAGONAL VESSEL
BS ISO 3302-1:2014 Rubber. Tolerances for products Dimensional tolerances
BS EN 50620:2017 Electric cables. Charging cables for electric vehicles (BT(DE/NOT)259)
BS ISO 4666-3:2016 Rubber, vulcanized. Determination of temperature rise and resistance to fatigue in flexometer testing Compression flexometer (constant-strain type)
08/30156909 DC : DRAFT APR 2008 BS EN 15807 - RAILWAY APPLICATIONS - PNEUMATIC HALF COUPLINGS
BS 7470:1991 Specification for clear-view screens for use in ships
14/30302298 DC : 0 BS ISO 9940 - AEROSPACE SERIES - FLUID, HYDRAULIC, PHOSPHATE ESTER-BASE, FIRE RESISTANT - TECHNICAL SPECIFICATION
BS F 154:2006 Properties of fluorosilicone rubber sheet, mouldings and extrusions. Specification
BS EN 61230:2008 Live working. Portable equipment for earthing or earthing and short-circuiting
13/30290460 DC : 0 BS ISO 9940 - AEROSPACE SERIES - FLUID, HYDRAULIC, PHOSPHATE ESTER-BASE, FIRE RESISTANT - TECHNICAL SPECIFICATION
16/30293875 DC : 0 BS EN ISO 28706-2 - DETERMINATION OF RESISTANCE TO CHEMICAL CORROSION - PART 2: DETERMINATION OF RESISTANCE TO CHEMICAL CORROSION BY BOILING ACIDS, BOILING NEUTRAL LIQUIDS, ALKALINE LIQUIDS AND/OR THEIR VAPOURS
02/102106 DC : DRAFT MAR 2002 PREN 13748-2 - TERRAZZO TILES - PART 2: TERRAZZO TILES FOR EXTERIOR USE
PD CEN/TS 12697-50:2016 Bituminous mixtures. Test methods Resistance to scuffing
BS ISO 7267-3:2017 Rubber-covered rollers. Determination of apparent hardness Pusey and Jones method
11/30211730 DC : 0 BS ISO 9352 - PLASTICS - DETERMINATION OF RESISTANCE TO WEAR BY ABRASIVE WHEELS
16/30320762 DC : 0 BS EN 1097-2 - TESTS FOR MECHANICAL AND PHYSICAL PROPERTIES OF AGGREGATES - PART 2: METHODS FOR THE DETERMINATION OF RESISTANCE TO FRAGMENTATION
PREN 13832-3 : DRAFT 2017 FOOTWEAR PROTECTING AGAINST CHEMICALS - PART 3: REQUIREMENTS FOR PROLONGED CONTACT WITH CHEMICALS
BS ISO 9352:2012 Plastics. Determination of resistance to wear by abrasive wheels
PREN ISO 10545-4 : DRAFT 2013 CERAMIC TILES - PART 4: DETERMINATION OF MODULUS OF RUPTURE AND BREAKING STRENGTH (ISO/DIS 10545-4:2013)
05/30127024 DC : DRAFT SEP 2005 ISO 4930 - ROAD VEHICLES - ELASTOMERIC SEALS FOR HYDRAULIC DISC BRAKE CYLINDERS USING A NON-PETROLEUM BASE HYDRAULIC BRAKE FLUID (SERVICE TEMPERATURE 150 DEGREE C MAX.)
BS 3900-E15(1997) : 1997 METHODS OF TEST FOR PAINTS - DETERMINATION OF RESISTANCE TO ABRASION (ROTATING ABRASIVE RUBBER WHEEL)
BS EN ISO 8362-2:2015 Injection containers and accessories Closures for injection vials
BS EN 13329 : 2016 LAMINATE FLOOR COVERINGS - ELEMENTS WITH A SURFACE LAYER BASED ON AMINOPLASTIC THERMOSETTING RESINS - SPECIFICATIONS, REQUIREMENTS AND TEST METHODS
BS ISO 5794-2:2014 Rubber compounding ingredients. Silica, precipitated, hydrated Evaluation procedures in styrene-butadiene rubber
BS ISO 13926-2:2017 Pen systems Plunger stoppers for pen-injectors for medical use
BS ISO 27588:2012 Rubber, vulcanized or thermoplastic. Determination of dead-load hardness using the very low rubber hardness (VLRH) scale
01/714273 DC : 0 ISO/DIS 1179-2 - CONNECTIONS FOR GENERAL USE AND FLUID POWER - PORTS AND STUD ENDS WITH ISO 228-1 THREADS WITH ELASTOMERIC OR METAL-TO-METAL SEALING - PART 2: HEAVY-DUTY (S SERIES) AND LIGHT-DUTY (L SERIES) STUD ENDS WITH ELASTOMERIC SEALING (TYPE E)
04/30110818 DC : 0 ISO 18517 - RUBBER, VULCANIZED OR THERMOPLASTIC - HARDNESS TESTING - INTRODUCTION AND GUIDE
DIN EN ISO 9117-5:2012-11 Paints and varnishes - Drying tests - Part 5: Modified Bandow-Wolff test (ISO 9117-5:2012)
UNE 211632-1:2017 Power cables with extruded insulation and their accessories for rated voltages above 36 kV (Um = 42 kV) up to 150 kV (Um = 170 kV). Part 1: Requirements and test methods
05/30127034 DC : DRAFT SEP 2005 ISO 6119 - ROAD VEHICLES - ELASTOMERIC SEALS FOR HYDRAULIC DISC BRAKE CYLINDERS USING A NON-PETROLEUM BASE HYDRAULIC BRAKE FLUID (SERVICE TEMPERATURE 120 DEGREE C MAX.)
BS ISO 7619-2:2004 Rubber, vulcanized or thermoplastic. Determination of indentation hardness IRHD pocket meter method
DIN 19538-10 E : 1999 PIPES AND FITTINGS MADE OF CHLORINATED POLYVINYL CHLORIDE (PVC-C) FOR HOT-WATER RESISTANT WASTE AND SOIL DISCHARGE SYSTEMS INSIDE BUILDINGS - PART 10: FIRE BEHAVIOUR, QUALITY CONTROL AND INSTALLATION RECOMMENDATIONS
BS EN ISO 12945-3:2014 Textiles. Determination of the fabric propensity to surface pilling, fuzzing or matting Random tumble pilling method
BIS IS 3400-6 : 2012 METHODS OF TEST FOR VULCANIZED RUBBER - PART 6: DETERMINATION OF THE EFFECT OF LIQUIDS
04/30095727 DC : DRAFT APR 2004 EN 13832-2 - FOOTWEAR PROTECTING AGAINST CHEMICALS AND MICRO-ORGANISMS - PART 2: PROTECTION AGAINST CHEMICALS SPRAYING
PREN 14420-7 : DRAFT 2010 HOSE FITTINGS WITH CLAMP UNITS - PART 7: CAM LOCKING COUPLINGS
13/30241415 DC : 0 BS EN 15566 - RAILWAY APPLICATIONS - RAILWAY ROLLING STOCK - DRAW GEAR AND SCREW COUPLING
DIN EN ISO 8362-5:2016-07 INJECTION CONTAINERS AND ACCESSORIES - PART 5: FREEZE DRYING CLOSURES FOR INJECTION VIALS (ISO 8362-5:2016)
03/112934 DC : 0 ISO 21690 - GLASS IN BUILDING - GLASS BLOCKS - SPECIFICATION
XP ENV 1565-2 : 2003 XP PLASTICS PIPING SYSTEMS FOR SOIL AND WASTE DISCHARGE (LOW AND HIGH TEMPERATURE) WITHIN THE BUILDING STRUCTURE - STYRENE COPOLYMER BLENDS (SAN+PVC) - PART 2: GUIDANCE FOR THE ASSESSMENT OF CONFORMITY
BS ISO 29584:2015 Glass in building. Pendulum impact testing and classification of safety glass
BS ISO 6162-1:2012 Hydraulic fluid power. Flange connections with split or one-piece flange clamps and metric or inch screws Flange connectors, ports and mounting surfaces for use at pressures of 3,5 MPa (35 bar) to 35 MPa (350 bar), DN 13 to DN 127
13/30278121 DC : 0 BS ISO 3302-1 - RUBBER - TOLERANCES FOR PRODUCTS - PART 1: DIMENSIONAL TOLERANCES
BS EN ISO 9117-5:2012 Paints and varnishes. Drying tests Modified Bandow-Wolff test
BS ISO 1382:2012 Rubber. Vocabulary
BS ISO 6149-2:1993 Connections for fluid power and general use. Ports and stud ends with ISO 261 threads and O-ring sealing Heavy-duty (S series) stud ends. Dimensions, design, test methods and requirements.
BS ISO 8434-4 : 1995 AMD 11038 METALLIC TUBE CONNECTIONS FOR FLUID POWER AND GENERAL USE - 24 DEGREE CONE CONNECTORS WITH O-RING WELD-ON NIPPLES
UNE-EN 438-2:2016 High-pressure decorative laminates (HPL) - Sheets based on thermosetting resins (Usually called Laminates) - Part 2: Determination of properties
DIN EN 13832-2:2006-11 FOOTWEAR PROTECTING AGAINST CHEMICALS - PART 2: REQUIREMENTS FOR FOOTWEAR RESISTANT TO CHEMICALS UNDER LABORATORY CONDITIONS
01/121060 DC : DRAFT MAR 2001 PREN 13121-3 GRP TANKS AND VESSELS FOR USE ABOVE GROUND - PART 3: DESIGN AND WORKMANSHIP
BS EN 61823:2003 Electrical installations for lighting and beaconing of aerodromes. AGL series transformers
SAE J 518/1 : 2013 HYDRAULIC FLANGED TUBE, PIPE, AND HOSE CONNECTIONS, 4-SCREW FLANGE CONNECTION - PART 1: 3.5 MPA TO 35 MPA (CODE 61)
BS ISO 19003:2006 Rubber and rubber products. Guidance on the application of statistics to physical testing
07/30169154 DC : 0 BS ISO 28706-2 - VITREOUS AND PORCELAIN ENAMELS - DETERMINATION OF RESISTANCE TO CHEMICAL CORROSION - PART 2: DETERMINATION OF RESISTANCE TO CHEMICAL CORROSION BY BOILING ACIDS, NEUTRAL LIQUIDS AND/OR THEIR VAPOURS
I.S. EN 1081:1998 RESILIENT FLOOR COVERINGS - DETERMINATION OF THE ELECTRICAL RESISTANCE
DIN ISO 3601-1:2013-11 Fluid power systems - O-rings - Part 1: Inside diameters, cross-sections, tolerances and designation codes (ISO 3601-1:2012 + Cor. 1:2012)
PREN 6111 : 200P1 AEROSPACE SERIES - ETHYLENE-PROPYLENE ELASTOMER (EPM/EPDM) - HARDNESS 80 IRHD FOR STATIC SEAL ELEMENTS IN HYDRAULIC SYSTEMS FOR LONG-TERM APPLICATION - MATERIAL STANDARD
DD ENV 1565-2:2001 Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure. Styrene copolymer blends (SAN + PVC) Guidance for the assessment of conformity
BS ISO 22762-1:2005 Elastomeric seismic-protection isolators Test methods
UNI EN 16084 : 2011 REFRIGERATING SYSTEMS AND HEAT PUMPS - QUALIFICATION OF TIGHTNESS OF COMPONENTS AND JOINTS
DIN ISO 11040-5 E : 2013 PREFILLED SYRINGES - PART 5: PLUNGER STOPPERS FOR INJECTABLES (ISO 11040-5:2012)
PREN 3207 : 1996 AEROSPACE SERIES - RUBBER COMPOUNDS - TECHNICAL SPECIFICATION
17/30346164 DC : 0 BS ISO 20457 - PLASTICS MOULDED PARTS - TOLERANCES AND ACCEPTANCE CONDITIONS
API 14A RUSSIAN : 2001 SPECIFICATION FOR SUBSURFACE SAFETY VALVE EQUIPMENT
CEI 20-66 : 2010 POWER CABLES WITH EXTRUDED INSULATION AND THEIR ACCESSORIES FOR RATED VOLTAGES ABOVE 36 KV (U[M] = 42 KV) UP TO 150 KV (U[M] = 170 KV)
ISO 10432:2004 Petroleum and natural gas industries Downhole equipment Subsurface safety valve equipment
ISO 19660:2018 Cream — Determination of fat content — Acido-butyrometric method
UNI EN ISO 9117-5 : 2012 PAINTS AND VARNISHES - DRYING TESTS - PART 5: MODIFIED BANDOW-WOLFF TEST
I.S. EN ISO 8362-5:2016 INJECTION CONTAINERS AND ACCESSORIES - PART 5: FREEZE DRYING CLOSURES FOR INJECTION VIALS (ISO 8362-5:2016)
16/30318653 DC : 0 BS EN 681-1 - ELASTOMERIC SEALS - MATERIAL REQUIREMENTS FOR PIPE JOINT SEALS USED IN WATER AND DRAINAGE APPLICATIONS - PART 1: VULCANIZED RUBBER
ISO 6117:2005 Road vehicles — Elastomeric boots for drum-type, hydraulic brake wheel cylinders using a non-petroleum base hydraulic brake fluid (service temperature 100 degrees C max.)
UNI ISO 8434-3 : 2012 METALLIC TUBE CONNECTIONS FOR FLUID POWER AND GENERAL USE - PART 3: O-RING FACE SEAL CONNECTORS
XP CEN/TS 15901-6 : 2011 XP ROAD AND AIRFIELD SURFACE CHARACTERISTICS - PART 6: PROCEDURE FOR DETERMINING THE SKID RESISTANCE OF A PAVEMENT SURFACE BY MEASUREMENT OF THE SIDEWAY FORCE COEFFICIENT (SFCS): SCRIM
I.S. EN 13832-3:2006 FOOTWEAR PROTECTING AGAINST CHEMICALS - PART 3: REQUIREMENTS FOR FOOTWEAR HIGHLY RESISTANT TO CHEMICALS UNDER LABORATORY CONDITIONS
ISO 2734:1997 Vitreous and porcelain enamels Apparatus for testing with alkaline liquids
EN ISO 14903:2017 Refrigerating systems and heat pumps - Qualification of tightness of components and joints (ISO 14903:2017)
ISO 5794-3:2011 Rubber compounding ingredients Silica, precipitated, hydrated Part 3: Evaluation procedures in a blend of solution styrene-butadiene rubber (S-SBR) and butadiene rubber (BR)
ISO 16589-1:2011 Rotary shaft lip-type seals incorporating thermoplastic sealing elements — Part 1: Nominal dimensions and tolerances
ISO 13268:2010 Thermoplastics piping systems for non-pressure underground drainage and sewerage Thermoplastics shafts or risers for inspection chambers and manholes Determination of ring stiffness
ISO 18869:2017 Hydraulic fluid power — Test methods for couplings actuated with or without tools
ISO 6356:2012 Textile and laminate floor coverings — Assessment of static electrical propensity — Walking test
IEC 60079-0:2017 Explosive atmospheres - Part 0: Equipment - General requirements
BS ISO 4666-4:2007 Rubber, vulcanized. Determination of temperature rise and resistance to fatigue in flexometer testing Constant-stress flexometer
EN 13832-3:2006 Footwear protecting against chemicals - Part 3: Requirements for footwear highly resistant to chemicals under laboratory conditions
DIN EN ISO 8434-1:2016-10 (Draft) METALLIC TUBE CONNECTIONS FOR FLUID POWER AND GENERAL USE - PART 1: 24 DEGREE CONE CONNECTORS
18/30365845 DC : 0 BS EN 1337-3 - STRUCTURAL BEARINGS - PART 3: ELASTOMERIC BEARINGS
ISO 16936-2:2005 Glass in building — Forced-entry security glazing — Part 2: Test and classification by repetitive impact of a hammer and axe at room temperature
18/30368675 DC : 0 BS EN 1097-2 - TESTS FOR MECHANICAL AND PHYSICAL PROPERTIES OF AGGREGATES - PART 2: METHODS FOR THE DETERMINATION OF RESISTANCE TO FRAGMENTATION
ISO 1288-3:2016 Glass in building — Determination of the bending strength of glass — Part 3: Test with specimen supported at two points (four point bending)
ISO 7619-2:2010 Rubber, vulcanized or thermoplastic Determination of indentation hardness Part 2: IRHD pocket meter method
I.S. EN ISO 28706-4:2016 VITREOUS AND PORCELAIN ENAMELS - DETERMINATION OF RESISTANCE TO CHEMICAL CORROSION - PART 4: DETERMINATION OF RESISTANCE TO CHEMICAL CORROSION BY ALKALINE LIQUIDS USING A CYLINDRICAL VESSEL (ISO 28706-4:2016)
UNE-EN ISO 9117-5:2013 Paints and varnishes - Drying tests - Part 5: Modified Bandow-Wolff test (ISO 9117-5:2012)
ISO 13363:2016 Rubber and plastics hoses for marine-engine wet-exhaust systems — Specification
PREN 1339 : DRAFT 2010 CONCRETE PAVING FLAGS - REQUIREMENTS AND TEST METHODS
BS EN 1081:1998 Resilient floor coverings. Determination of the electrical resistance
UNI EN 13071-1 : 2008 STATIONARY WASTE CONTAINERS UP TO 5000 L, TOP LIFTED AND BOTTOM EMPTIED - PART 1: GENERAL REQUIREMENTS
UNE-EN 50508:2011 Multi-purpose insulating sticks for electrical operations on high voltage installations
UNE-EN 15551:2017 Railway applications - Railway rolling stock - Buffers
ISO 3601-5:2015 Fluid power systems O-rings Part 5: Specification of elastomeric materials for industrial applications
DIN EN 438-2:2016-06 HIGH-PRESSURE DECORATIVE LAMINATES (HPL) - SHEETS BASED ON THERMOSETTING RESINS (USUALLY CALLED LAMINATES) - PART 2: DETERMINATION OF PROPERTIES
ISO 1382:2012 Rubber Vocabulary
ISO 24454:2008 Rubber Acquisition and presentation of comparable multi-point data
ISO 24453:2008 Rubber Acquisition and presentation of comparable single-point data
EN 1081:1998 Resilient floor coverings - Determination of the electrical resistance
ISO 6446:1994 Rubber products — Bridge bearings — Specification for rubber materials
EN 13329:2016+A1:2017 Laminate floor coverings - Elements with a surface layer based on aminoplastic thermosetting resins - Specifications, requirements and test methods
IEC 60840 REDLINE : 4.0 POWER CABLES WITH EXTRUDED INSULATION AND THEIR ACCESSORIES FOR RATED VOLTAGES ABOVE 30 KV (U[M] = 36 KV) UP TO 150 KV (U[M] = 170 KV) - TEST METHODS AND REQUIREMENTS
PREN 1338 : DRAFT 2010 CONCRETE PAVING BLOCKS - REQUIREMENTS AND TEST METHODS
ISO 7619-1:2010 Rubber, vulcanized or thermoplastic Determination of indentation hardness Part 1: Durometer method (Shore hardness)
ISO 23711:2003 Elastomeric seals — Requirements for materials for pipe joint seals used in water and drainage applications — Thermoplastic elastomers
EN ISO 8434-1:2007/AC:2009 METALLIC TUBE CONNECTIONS FOR FLUID POWER AND GENERAL USE - PART 1: 24 DEGREE CONE CONNECTORS
ISO 5636-6:2015 Paper and board Determination of air permeance (medium range) Part 6: Oken method
I.S. 140-2:1987 SCHOOL FURNITURE - PART 2: PERFORMANCE REQUIREMENTS AND TESTS FOR CHAIRS FOR SCHOOLS
ISO 11424:2017 Rubber hoses and tubing for air and vacuum systems for internal-combustion engines — Specification
ISO 6162-1:2012 Hydraulic fluid power — Flange connections with split or one-piece flange clamps and metric or inch screws — Part 1: Flange connectors, ports and mounting surfaces for use at pressures of 3,5 MPa (35 bar) to 35 MPa (350 bar), DN 13 to DN 127
I.S. EN 61241-0:2006 ELECTRICAL APPARATUS FOR USE IN THE PRESENCE OF COMBUSTIBLE DUST - PART 0: GENERAL REQUIREMENTS
ISO 11040-2:2011 Prefilled syringes Part 2: Plunger stoppers for dental local anaesthetic cartridges
ISO 18517:2015 Rubber, vulcanized or thermoplastic Hardness testing Introduction and guide
I.S. EN ISO 9117-1:2009 PAINTS AND VARNISHES - DRYING TESTS - PART 1: DETERMINATION OF THROUGH-DRY STATE AND THROUGH-DRY TIME
ISO 13926-2:2017 Pen systems — Part 2: Plunger stoppers for pen-injectors for medical use
I.S. EN ISO 28706-2:2017 VITREOUS AND PORCELAIN ENAMELS - DETERMINATION OF RESISTANCE TO CHEMICAL CORROSION - PART 2: DETERMINATION OF RESISTANCE TO CHEMICAL CORROSION BY BOILING ACIDS, BOILING NEUTRAL LIQUIDS, ALKALINE LIQUIDS AND/OR THEIR VAPOURS (ISO 28706-2:2017)
I.S. EN 61823:2003 ELECTRICAL INSTALLATIONS FOR LIGHTING AND BEACONING OF AERODROMES - AGL SERIES TRANSFORMERS
ISO 7619:1997 Rubber Determination of indentation hardness by means of pocket hardness meters
ISO 8434-1:2007 Metallic tube connections for fluid power and general use Part 1: 24 degree cone connectors
I.S. EN ISO 8362-2:2015 INJECTION CONTAINERS AND ACCESSORIES - PART 2: CLOSURES FOR INJECTION VIALS (ISO 8362-2:2015)
NF EN ISO 8871-2 : 2005 AMD 1 2014 ELECTROMETRIC PARTS FOR PARENTERALS AND FOR DEVICES FOR PHARMACEUTICAL USE - PART 2: IDENTIFICATION AND CHARACTERIZATION
DIN EN ISO 6806:2015-08 (Draft) RUBBER HOSES AND HOSE ASSEMBLIES FOR USE IN OIL BURNERS - SPECIFICATION (ISO 6806:2017)
DIN EN 1288-5:2000-09 GLASS IN BUILDING - DETERMINATION OF THE BENDING STRENGTH OF GLASS - PART 5: COAXIAL DOUBLE RING TEST ON FLAT SPECIMENS WITH SMALL TEST SURFACE AREAS
DIN EN 1097-2:2016-07 (Draft) TESTS FOR MECHANICAL AND PHYSICAL PROPERTIES OF AGGREGATES - PART 2: METHODS FOR THE DETERMINATION OF RESISTANCE TO FRAGMENTATION
DIN EN 13036-4 E : 2011 ROAD AND AIRFIELD SURFACE CHARACTERISTICS - TEST METHODS - PART 4: METHOD FOR MEASUREMENT OF SLIP/SKID RESISTANCE OF A SURFACE: THE PENDULUM TEST
DIN EN ISO 8980-5 E : 2005 OPHTHALMIC OPTICS - UNCUT FINISHED SPECTACLE LENSES - PART 5: MINIMUM REQUIREMENTS FOR SPECTACLE LENS SURFACES CLAIMED TO BE ABRASION-RESISTANT
DIN EN 1288-3:2000-09 GLASS IN BUILDING - DETERMINATION OF THE BENDING STRENGTH OF GLASS - PART 3: TEST WITH SPECIMEN SUPPORTED AT TWO POINTS (FOUR POINT BENDING)
BS EN 3050:1998 O-rings, in fluorocarbon rubber (FKM), low compression set. Technical specification
BS EN 14354:2017 Wood-based panels. Wood veneer floor coverings
I.S. EN 13150:2001 WORKBENCHES FOR LABORATORIES - DIMENSIONS, SAFETY REQUIREMENTS AND TEST METHODS
BS EN ISO 10432:2004 Petroleum and natural gas industries. Downhole equipment. Subsurface safety valve equipment
UNI EN 12697-20 : 2012 BITUMINOUS MIXTURES - TEST METHODS FOR HOT MIX ASPHALT - PART 20: INDENTATION USING CUBE OR CYLINDRICAL SPECIMENS (CY)
I.S. EN 1097-2:2010 TESTS FOR MECHANICAL AND PHYSICAL PROPERTIES OF AGGREGATES - PART 2: METHODS FOR THE DETERMINATION OF RESISTANCE TO FRAGMENTATION
BS EN ISO 6149-3:2007 Connections for hydraulic fluid power and general use. Ports and stud ends with ISO 261 metric threads and O-ring sealing Dimensions, design, test methods and requirements for light-duty (L series) stud ends
UNE-EN ISO 6806:2017 Rubber hoses and hose assemblies for use in oil burners - Specification (ISO 6806:2017)
ISO 28706-2:2017 Vitreous and porcelain enamels — Determination of resistance to chemical corrosion — Part 2: Determination of resistance to chemical corrosion by boiling acids, boiling neutral liquids, alkaline liquids and/or their vapours
IEC 60079-0:2017 RLV Explosive atmospheres - Part 0: Equipment - General requirements
ONORM EN 12697-22 : 2007 BITUMINOUS MIXTURES - TEST METHODS FOR HOT MIX ASPHALT - PART 22: WHEEL TRACKING
BS EN 12697-20:2012 Bituminous mixtures. Test methods for hot mix asphalt Indentation using cube or cylindrical specimens (CY)
BS EN 805:2000 Water supply. Requirements for systems and components outside buildings
BS EN ISO 5470-1:2016 Rubber- or plastics-coated fabrics. Determination of abrasion resistance Taber abrader
ISO 4869-3:2007 Acoustics — Hearing protectors — Part 3: Measurement of insertion loss of ear-muff type protectors using an acoustic test fixture
ISO 8536-2:2010 Infusion equipment for medical use — Part 2: Closures for infusion bottles
ISO 9117-1:2009 Paints and varnishes — Drying tests — Part 1: Determination of through-dry state and through-dry time
ISO 2039-2:1987 Plastics Determination of hardness Part 2: Rockwell hardness
IEC 60512-7-1:2010 Connectors for electronic equipment - Tests and measurements - Part 7-1: Impact tests (free connectors) - Test 7a: Free fall (repeated)
BS EN 1293:1999 General requirements for components used in pneumatically pressurized discharge pipes, drains and sewers
BS EN 773:1999 General requirements for components used in hydraulically pressurized discharge pipes, drains and sewers
UNE-EN 12697-20:2013 Bituminous mixtures - Test methods for hot mix asphalt - Part 20: Indentation using cube or cylindrical specimens (CY)
UNE 41902:2017 EX Surfaces for pedestrian transit. Determination of the slip resistance by pendulum friction method . Dry test.
BS EN 1288-2:2000 Glass in building. Determination of the bending strength of glass Coaxial double ring test on flat specimens with large test surface areas
BS EN 14483-4:2004 Vitreous and porcelain enamels. Determination of resistance to chemical corrosion Determination of resistance to chemical corrosion by alkaline liquids using a cylindrical vessel
ISO 18082:2014 Anaesthetic and respiratory equipment Dimensions of non-interchangeable screw-threaded (NIST) low-pressure connectors for medical gases
ISO 9117-5:2012 Paints and varnishes — Drying tests — Part 5: Modified Bandow-Wolff test
UNI EN 1097-8 : 2009 TESTS FOR MECHANICAL AND PHYSICAL PROPERTIES OF AGGREGATES - PART 8: DETERMINATION OF THE POLISHED STONE VALUE
BS EN 13150:2001 Workbenches for laboratories. Dimensions, safety requirements and test methods
UNI EN 1097-2 : 2010 TESTS FOR MECHANICAL AND PHYSICAL PROPERTIES OF AGGREGATES - PART 2: METHODS FOR THE DETERMINATION OF RESISTANCE TO FRAGMENTATION
BS EN ISO 6806:2017 Rubber hoses and hose assemblies for use in oil burners. Specification
IEC 60544-2:2012 Electrical insulating materials - Determination of the effects of ionizing radiation on insulating materials - Part 2: Procedures for irradiation and test
ISO 9117-6:2012 Paints and varnishes — Drying tests — Part 6: Print-free test
BS EN 14188-3 : 2005 JOINT FILLERS AND SEALANTS - PART 3: SPECIFICATIONS FOR PREFORMED JOINT SEALS
BS EN 13748-2:2004 Terrazzo tiles Terrazzo tiles for external use
BS EN 13036-4:2011 Road and airfield surface characteristics. Test methods Method for measurement of slip/skid resistance of a surface: The pendulum test
BS EN ISO 8980-4:2006 Ophthalmic optics. Uncut finished spectacle lenses Specifications and test methods for anti-reflective coatings
ISO 8362-5:2016 Injection containers and accessories Part 5: Freeze drying closures for injection vials
UNE-EN 13541:2012 Glass in building - Security glazing - Testing and classification of resistance against explosion pressure
ISO 5470-1:2016 Rubber- or plastics-coated fabrics Determination of abrasion resistance Part 1: Taber abrader
ISO 4535:1983 Vitreous and porcelain enamels Apparatus for determination of resistance to hot detergent solutions used for washing textiles
ONORM EN 12697-20 : 2012 BITUMINOUS MIXTURES - TEST METHODS FOR HOT MIX ASPHALT - PART 20: INDENTATION USING CUBE OR CYLINDRICAL SPECIMENS (CY)
ISO/TR 4869-3:1989 Acoustics Hearing protectors Part 3: Simplified method for the measurement of insertion loss of ear-muff type protectors for quality inspection purposes
BS EN ISO 2039-2:2000 Determination of Rockwell hardness. Rockwell hardness Rockwell hardness
03/110544 DC : DRAFT JUNE 2003 ISO 16936-3 - GLASS IN BUILDING - FORCED-ENTRY SECURITY GLAZING. TEST AND CLASSIFICATION - PART 3: TEST AND CLASSIFICATION BY MANUAL ATTACK
ISO 9237:1995 Textiles — Determination of the permeability of fabrics to air
BS EN 1337-3:2005 Structural bearings Elastomeric bearings
ISO 9974-2:1996 Connections for general use and fluid power — Ports and stud ends with ISO 261 threads with elastomeric or metal-to-metal sealing — Part 2: Stud ends with elastomeric sealing (type E)
IEC 61823:2002 Electrical installations for lighting and beaconing of aerodromes - AGL series transformers
BS EN 1153:1996 Kitchen furniture. Safety requirements and test methods for built-in and free standing kitchen cabinets and work tops
ISO 12945-3:2014 Textiles- Determination of the fabric propensity to surface pilling, fuzzing or matting Part 3: Random tumble pilling method
ISO 8980-4:2006 Ophthalmic optics — Uncut finished spectacle lenses — Part 4: Specifications and test methods for anti-reflective coatings
IEC 61518:2001 Mating dimensions between differential pressure (type) measuring instruments and flanged-on shut-off devices up to 413 BAR (41,3 MPa)
ISO 3678:1976 Paints and varnishes — Print-free test
ISO 8362-2:2015 Injection containers and accessories — Part 2: Closures for injection vials
BS EN 1288-3:2000 Glass in building. Determination of the bending strength of glass Test with specimen supported at two points (four point bending)
ISO 8871-2:2003 Elastomeric parts for parenterals and for devices for pharmaceutical use Part 2: Identification and characterization
BS EN 13541:2012 Glass in building. Security glazing. Testing and classification of resistance against explosion pressure
05/30134569 DC : DRAFT JUN 2005 IEC 60079-0. ED. 5.0 - ELECTRICAL APPARATUS FOR EXPLOSIVE ATMOSPHERES - PART 0: GENERAL REQUIREMENTS
I.S. EN 12697-22:2004 BITUMINOUS MIXTURES - TEST METHODS FOR HOT MIX ASPHALT - PART 22: WHEEL TRACKING
ISO 8871-1:2003 Elastomeric parts for parenterals and for devices for pharmaceutical use Part 1: Extractables in aqueous autoclavates
UNE-EN ISO 13260:2012 Thermoplastics piping systems for non-pressure underground drainage and sewerage - Test method for resistance to combined temperature cycling and external loading (ISO 13260:2010)
BS EN 1288-4:2000 Glass in building. Determination of the bending strength of glass Testing of channel shaped glass
UNE-EN 13329:2016 Laminate floor coverings - Elements with a surface layer based on aminoplastic thermosetting resins - Specifications, requirements and test methods
I.S. EN 12697-20:2012 BITUMINOUS MIXTURES - TEST METHODS FOR HOT MIX ASPHALT - PART 20: INDENTATION USING CUBE OR CYLINDRICAL SPECIMENS (CY)
ISO 8980-5:2005 Ophthalmic optics Uncut finished spectacle lenses Part 5: Minimum requirements for spectacle lens surfaces claimed to be abrasion-resistant
BS EN 15330-1:2013 Surfaces for sports areas. Synthetic turf and needle-punched surfaces primarily designed for outdoor use Specification for synthetic turf surfaces for football, hockey, rugby union training, tennis and multi-sports use
BS EN ISO 8536-2:2010 Infusion equipment for medical use Closures for infusion bottles
BS EN 1097-2:2010 Tests for mechanical and physical properties of aggregates Methods for the determination of resistance to fragmentation
IEC 60068-2-31:2008 Environmental testing - Part 2-31: Tests - Test Ec: Rough handling shocks, primarily for equipment-type specimens
UNE-EN 14354:2017 Wood-based panels - Wood veneer floor coverings
BS EN 12697-22:2003 Bituminous mixtures. Test methods for hot mix asphalt Wheel tracking
ISO 6149-2:2006 Connections for hydraulic fluid power and general use Ports and stud ends with ISO 261 metric threads and O-ring sealing Part 2: Dimensions, design, test methods and requirements for heavy-duty (S series) stud ends
BS EN 682:2002 Elastomeric seals. Materials requirements for seals used in pipes and fi ttings carrying gas and hydrocarbon fluids
BS EN 12503-6:2001 Sports mats Determination of the top friction
BS EN ISO 4535:2000 Vitreous and porcelain enamels. Apparatus for determination of resistance to hot detergent solutions used for washing textiles
UNE-EN 12561-7:2012 Railway applications - Tank wagons - Part 7: Platforms and ladders
ISO 19879:2010 Metallic tube connections for fluid power and general use Test methods for hydraulic fluid power connections
UNE 41901:2017 EX Surfaces for pedestrian transit. Determination of the slip resistance by pendulum friction method. Wet test.
BS EN 13787:2001 Elastomers for gas pressure regulators and associated safety devices for inlet pressures up to 100 bar
BS EN 3207:1998 Rubber compounds. Technical specification
I.S. EN 1097-8:2009 TESTS FOR MECHANICAL AND PHYSICAL PROPERTIES OF AGGREGATES - PART 8: DETERMINATION OF THE POLISHED STONE VALUE
ISO 6149-3:2006 Connections for hydraulic fluid power and general use Ports and stud ends with ISO 261 metric threads and O-ring sealing Part 3: Dimensions, design, test methods and requirements for light-duty (L series) stud ends
EN 12697-20:2012 BITUMINOUS MIXTURES - TEST METHODS FOR HOT MIX ASPHALT - PART 20: INDENTATION USING CUBE OR CYLINDRICAL SPECIMENS (CY)
BS EN 1123-1:1999 Pipes and fittings of longitudinally welded hot-dip galvanized steel pipes with spigot and socket for waste water systems Requirements, testing, quality control
BS EN 1063:2000 Glass in building. Security glazing. Testing and classification of resistance against bullet attack
EN 13150 : 2001 WORKBENCHES FOR LABORATORIES - DIMENSIONS, SAFETY REQUIREMENTS AND TEST METHODS
DIN EN 12697-22:2007-10 BITUMINOUS MIXTURES - TEST METHODS FOR HOT MIX ASPHALT - PART 22: WHEEL TRACKING
EN 15330-1:2013 Surfaces for sports areas - Synthetic turf and needle-punched surfaces primarily designed for outdoor use - Part 1: Specification for synthetic turf surfaces for football, hockey, rugby union training, tennis and multi-sports use
EN 356:1999 Glass in building - Security glazing - Testing and classification of resistance against manual attack
EN 681-1:1996/A3:2005 ELASTOMERIC SEALS - MATERIALS REQUIREMENTS FOR PIPE JOINT SEALS USED IN WATER AND DRAINAGE APPLICATIONS - PART 1: VULCANIZED RUBBER
EN 681-4:2000/A2:2005 ELASTOMERIC SEALS - MATERIALS REQUIREMENTS FOR PIPE JOINT SEALS USED IN WATER AND DRAINAGE APPLICATIONS - PART 4: CAST POLYURETHANE SEALING ELEMENTS
EN 14188-3 : 2006 JOINT FILLERS AND SEALANTS - PART 3: SPECIFICATIONS FOR PREFORMED JOINT SEALS
EN 858-1:2002/A1:2004 SEPARATOR SYSTEMS FOR LIGHT LIQUIDS (E.G. OIL AND PETROL) - PART 1: PRINCIPLES OF PRODUCT DESIGN, PERFORMANCE AND TESTING, MARKING AND QUALITY CONTROL
EN ISO 9237 : 1995 TEXTILES - DETERMINATION OF PERMEABILITY OF FABRICS TO AIR
EN ISO 6149-2:2007 Connections for hydraulic fluid power and general use - Ports and stud ends with ISO 261 metric threads and O-ring sealing - Part 2: Dimensions, design, test methods and requirements for heavy-duty (S series) stud ends (ISO 6149-2:2007)
EN ISO 4869-3:2007 Acoustics - Hearing protectors - Part 3: Measurement of insertion loss of ear-muff type protectors using an acoustic test fixture (ISO 4869-3:2007)
EN ISO 8980-4:2006 Ophthalmic optics - Uncut finished spectacle lenses - Part 4: Specifications and test methods for anti-reflective coatings (ISO 8980-4:2006)
EN 14483-3 : 2004 VITREOUS AND PORCELAIN ENAMELS - DETERMINATION OF RESISTANCE TO CHEMICAL CORROSION - PART 3: DETERMINATION OF RESISTANCE TO CHEMICAL CORROSION BY ALKALINE LIQUIDS USING A HEXAGONAL VESSEL
EN ISO 8536-2:2010 Infusion equipment for medical use - Part 2: Closures for infusion bottles (ISO 8536-2:2010)
EN ISO 8980-5 : 2005 Ophthalmic optics - Uncut finished spectacle lenses - Part 5: Minimum requirements for spectacle lens surfaces claimed to be abrasion-resistant (ISO 8980-5:2005)
EN 773:1999 General requirements for components used in hydraulically pressurized discharge pipes, drains and sewers
EN ISO 2039-2 : 1999 PLASTICS - DETERMINATION OF HARDNESS - PART 2 - ROCKWELL HARDNESS
EN 14241-1:2013 Chimneys - Elastomeric seals and elastomeric sealants - Material requirements and test methods - Part 1: Seals in flue liners
EN ISO 8362-5:2016 Injection containers and accessories - Part 5: Freeze drying closures for injection vials (ISO 8362-5:2016)
EN ISO 18082:2014/A1:2017 ANAESTHETIC AND RESPIRATORY EQUIPMENT - DIMENSIONS OF NON-INTERCHANGEABLE SCREW-THREADED (NIST) LOW-PRESSURE CONNECTORS FOR MEDICAL GASES (ISO 18082:2014/AMD 1:2017)
EN 15551:2017 Railway applications - Railway rolling stock - Buffers
EN 13748-2:2004 Terrazzo tiles - Part 2: Terrazzo tiles for external use
EN 14231:2003 Natural stone test methods - Determination of the slip resistance by means of the pendulum tester
EN ISO 23936-2:2011 Petroleum, petrochemical and natural gas industries - Non-metallic materials in contact with media related to oil and gas production - Part 2: Elastomers (ISO 23936-2:2011)
EN ISO 9974-2:2000 Connections for general use and fluid power - Ports and stud ends with ISO 261 threads with elastomeric or metal-to-metal sealing - Part 2: Stud ends with elastomeric sealing (type E) (ISO 9974-2:1996)
EN 14382:2005+A1:2009/AC:2009 SAFETY DEVICES FOR GAS PRESSURE REGULATING STATIONS AND INSTALLATIONS - GAS SAFETY SHUT-OFF DEVICES FOR INLET PRESSURES UP TO 100 BAR
EN 13748-1:2004/A1:2005 TERRAZZO TILES - PART 1: TERRAZZO TILES FOR INTERNAL USE
EN ISO 12311 : 2013 COR 2014 PERSONAL PROTECTIVE EQUIPMENT - TEST METHODS FOR SUNGLASSES AND RELATED EYEWEAR (ISO 12311:2013, CORRECTED VERSION 2014-08-15)
EN ISO 28706-4:2016 Vitreous and porcelain enamels - Determination of resistance to chemical corrosion - Part 4: Determination of resistance to chemical corrosion by alkaline liquids using a cylindrical vessel (ISO 28706-4:2016)
EN 29117 : 1992 PAINTS AND VARNISHES - DETERMINATION OF THROUGH-DRY STATE AND THROUGH-DRY TIME - METHOD OF TEST
EN ISO 9117-6:2012 Paints and varnishes - Drying tests - Part 6: Print-free test (ISO 9117-6:2012)
EN 682:2002/A1:2005 ELASTOMERIC SEALS - MATERIALS REQUIREMENTS FOR SEALS USED IN PIPES AND FITTINGS CARRYING GAS AND HYDROCARBON FLUIDS
EN 14982:2006+A1:2010 Plastics piping and ducting systems - Thermoplastics shafts or risers for inspection chambers and manholes - Determination of ring stiffness
EN 16084:2011 Refrigerating systems and heat pumps - Qualification of tightness of components and joints
EN ISO 3822-4:1997 Acoustics - Laboratory tests on noise emission from appliances and equipment used in water supply installations - Part 4: Mounting and operating conditions for special appliances
EN ISO 4535 : 1998 VITREOUS AND PORCELAIN ENAMELS - APPARATUS FOR DETERMINATION OF RESISTANCE TO HOT DETERGENT SOLUTIONS USED FOR WASHING TEXTILES
EN 805:2000 Water supply - Requirements for systems and components outside buildings
EN 527-3:2003 OFFICE FURNITURE - WORK TABLES AND DESKS - PART 3: METHODS OF TEST FOR THE DETERMINATION OF THE STABILITY AND THE MECHANICAL STRENGTH OF THE STRUCTURE
EN ISO 6806:2017 Rubber hoses and hose assemblies for use in oil burners - Specification (ISO 6806:2017)
EN 13787:2001 Elastomers for gas pressure regulators and associated safety devices for inlet pressures up to 100 bar
EN ISO 868:2003 Plastics and ebonite - Determination of indentation hardness by means of a durometer (Shore hardness) (ISO 868:2003)
EN 24869-3 : 1993 ACOUSTICS - HEARING PROTECTORS - SIMPLIFIED METHOD FOR THE MEASUREMENT OF INSERTION LOSS OF EAR-MUFF TYPE PROTECTORS FOR QUALITY INSPECTION PURPOSES
EN 13597:2003 Railway applications - Rubber suspension components - Rubber diaphragms for pneumatic suspension springs
EN 3207 : 1998 AEROSPACE SERIES - RUBBER COMPOUNDS - TECHNICAL SPECIFICATION
EN 15566:2016 Railway applications - Railway rolling stock - Draw gear and screw coupling
EN 1727 : 1998 DOMESTIC FURNITURE - STORAGE FURNITURE - SAFETY REQUIREMENTS AND TEST METHODS
EN 14483-2 : 2004 VITREOUS AND PORCELAIN ENAMELS - DETERMINATION OF RESISTANCE TO CHEMICAL CORROSION - PART 2: DETERMINATION OF RESISTANCE TO CHEMICAL CORROSION BY BOILING ACIDS, NEUTRAL LIQUIDS AND/OR THEIR VAPOURS
EN ISO 28706-2:2017 Vitreous and porcelain enamels - Determination of resistance to chemical corrosion - Part 2: Determination of resistance to chemical corrosion by boiling acids, boiling neutral liquids, alkaline liquids and/or their vapours (ISO 28706-2:2017)
EN 279 : 1991 HOMOGENOUS RUBBER MATERIALS FOR DYNAMIC SEALS IN DOMESTIC APPLIANCES USING COMBUSTIBLE GASES UP TO 200 MBAR
EN 16230-1:2013+A1:2014 Leisure karts - Part 1: Safety requirements and test methods for karts
EN 3747:2007 Aerospace series - O-rings, in fluorosilicone rubber (FVMQ) - Technical specification
EN 681-2:2000/A2:2005 ELASTOMERIC SEALS - MATERIALS REQUIREMENTS FOR PIPE JOINT SEALS USED IN WATER AND DRAINAGE APPLICATIONS - PART 2: THERMOPLASTIC ELASTOMERS
EN ISO 3678:1995 Paints and varnishes - Print-free test (ISO 3678:1976)
EN ISO 5470-1:2016 Rubber- or plastics-coated fabrics - Determination of abrasion resistance - Part 1: Taber abrader (ISO 5470-1:2016)
EN ISO 8362-2:2015 Injection containers and accessories - Part 2: Closures for injection vials (ISO 8362-2:2015)
EN ISO 8871-1 : 2004 ELASTOMERIC PARTS FOR PARENTERALS AND FOR DEVICES FOR PHARMACEUTICAL USE - PART 1: EXTRACTABLES IN AQUEOUS AUTOCLAVATES
EN ISO 8434-4 : 2000 METALLIC TUBE CONNECTIONS FOR FLUID POWER AND GENERAL USE - PART 4: 24 DEGREE CONE CONNECTORS WITH O-RING WELD-ON NIPPLES
EN 3050:1998 Aerospace series - O-rings, in fluorocarbon rubber (FKM), low compression set - Technical specification
EN 549:1994 Rubber materials for seals and diaphragms for gas appliances and gas equipment
EN ISO 9117-1:2009 Paints and varnishes - Drying tests - Part 1: Determination of through-dry state and through-dry time (ISO 9117-1:2009)
EN 1825-1:2004/AC:2006 GREASE SEPARATORS - PART 1: PRINCIPLES OF DESIGN, PERFORMANCE AND TESTING, MARKING AND QUALITY CONTROL
EN 14483-4 : 2004 VITREOUS AND PORCELAIN ENAMELS - DETERMINATION OF RESISTANCE TO CHEMICAL CORROSION - PART 4: DETERMINATION OF RESISTANCE TO CHEMICAL CORROSION BY ALKALINE LIQUIDS USING A CYLINDRICAL VESSEL
I.S. ENV 12633:2003 METHOD OF DETERMINATION OF UNPOLISHED AND POLISHED SLIP/SKID RESISTANCE VALUE
16/30338569 DC : 0 BS EN 12274-5 - SLURRY SURFACING - TEST METHOD - PART 5: DETERMINATION OF THE MINIMUM BINDER CONTENT AND WEARING RESISTANCE
03/110806 DC : DRAFT JUNE 2003 BS ISO 19879 - METALLIC TUBE CONNECTIONS FOR FLUID POWER AND GENERAL USE - TEST METHODS FOR HYDRAULIC FLUID POWER CONNECTIONS
04/30099874 DC : DRAFT JUL 2004 ISO 9211-4 - OPTICS AND OPTICAL INSTRUMENTS - OPTICAL COATINGS - PART 4: SPECIFIC TEST METHODS
05/30089181 DC : DRAFT FEB 2005 ISO 4195 - CONVEYOR BELTS - HEAT RESISTANCE
BS 903-3:2003 Physical testing of rubber Acquisition and presentation of comparable single-point data
14/30296014 DC : 0 BS ISO 18517 - RUBBER, VULCANIZED OR THERMOPLASTIC - HARDNESS TESTING - INTRODUCTION AND GUIDE
BS ISO 4928:2006 Road vehicles. Elastomeric cups and seals for cylinders for hydraulic braking systems using a non-petroleum base hydraulic brake fluid (Service temperature 120°C max.)
DIN ISO 11040-2:2012-10 Prefilled syringes - Part 2: Plunger stoppers for dental local anaesthetic cartridges (ISO 11040-2:2011)
96/106381 DC : DRAFT AUG 1996 PREN 1337-3 - STRUCTURAL BEARINGS - PART 3: ELASTOMERIC BEARINGS
EN ISO 4007:2012 Personal protective equipment - Eye and face protection - Vocabulary (ISO 4007:2012)
UNE-EN 15566:2017 Railway applications - Railway rolling stock - Draw gear and screw coupling
DIN ISO 4925:1980-04 ROAD VEHICLES - NON-PETROLEUM BASE BRAKE FLUID
BS ISO 10555-6 : 2015 INTRAVASCULAR CATHETERS - STERILE AND SINGLE-USE CATHETERS - PART 6: SUBCUTANEOUS IMPLANTED PORTS
ISO 4195-2:1988 Conveyor belts — Heat resistance — Part 2: Specifications
BS ISO 8536-6:2016 Infusion equipment for medical use Freeze drying closures for infusion bottles
I.S. EN 29117:1993 PAINTS AND VARNISHES - DETERMINATION OF THROUGH-DRY STATE AND THROUGH-DRY TIME - METHOD OF TEST
13/30262917 DC : 0 BS EN 15330-1 - SURFACES FOR SPORTS AREAS - SYNTHETIC TURF AND NEEDLE-PUNCHED SURFACES PRIMARILY DESIGNED FOR OUTDOOR USE - PART 1: SPECIFICATION FOR SYNTHETIC TURF SURFACES FOR FOOTBALL, HOCKEY, RUGBY UNION TRAINING, TENNIS AND MULTI-SPORTS USE
BS EN ISO 12311:2013 Personal protective equipment. Test methods for sunglasses and related eyewear
14/30219261 DC : 0 BS ISO 5636-6 - PAPER AND BOARD - DETERMINATION OF AIR PERMEANCE AND AIR RESISTANCE (MEDIUM RANGE) - PART 6: OKEN METHOD
17/30348155 DC : 0 BS EN ISO 10545-4 - CERAMIC TILES - PART 4: DETERMINATION OF MODULUS OF RUPTURE AND BREAKING STRENGTH
UNI EN ISO 9117-1 : 2009 PAINTS AND VARNISHES - DRYING TESTS - PART 1: DETERMINATION OF THROUGH-DRY STATE AND THROUGH-DRY TIME
PREN 1337-3 : DRAFT 2018 STRUCTURAL BEARINGS - PART 3: ELASTOMERIC BEARINGS
BS EN 60544-2:2012 Electrical insulating materials. Determination of the effects of ionizing radiation on insulating materials Procedures for irradiation and test
14/30288439 DC : 0 BS ISO 1817 - RUBBER, VULCANIZED OR THERMOPLASTIC - DETERMINATION OF THE EFFECT OF LIQUIDS
BS ISO 24338:2014 Laminate floor coverings. Determination of abrasion resistance
BS ISO 14903:2012 Refrigerating systems and heat pumps. Qualification of tightness of components and joints
SAE J 1926/2 : 2016 CONNECTIONS FOR GENERAL USE AND FLUID POWER - PORTS AND STUD ENDS WITH ASME B1.1 THREADS AND O-RING SEALING - PART 2: HEAVY-DUTY (S SERIES) STUD ENDS
06/30113809 DC : DRAFT APR 2006 ISO 4666-4 - RUBBER, VULCANIZED - DETERMINATION OF TEMPERATURE RAISE AND RESISTANCE TO FATIGUE IN FLEXOMETER TESTING - PART 4: CONSTANT STRESS FLEXOMETER
13/30289253 DC : 0 BS EN 13329 - LAMINATE FLOOR COVERINGS - ELEMENTS WITH A SURFACE LAYER BASED ON AMINOPLASTIC THERMOSETTING RESINS - SPECIFICATIONS, REQUIREMENTS AND TEST METHODS
08/30166722 DC : DRAFT MAR 2008 BS ISO 4662 - RUBBER - DETERMINATION OF REBOUND RESILIENCE OF VULCANIZATES
BS EN ISO 28706-3:2011 Vitreous and porcelain enamels. Determination of resistance to chemical corrosion Determination of resistance to chemical corrosion by alkaline liquids using a hexagonal vessel
BS 2782-3 Method 370:1990 Methods of testing plastics. Mechanical properties Determination of resistance to wear by abrasive wheels
I.S. EN 13832-2:2006 FOOTWEAR PROTECTING AGAINST CHEMICALS - PART 2: REQUIREMENTS FOR FOOTWEAR RESISTANT TO CHEMICALS UNDER LABORATORY CONDITIONS
14/30243471 DC : 0 BS ISO 15082 - ROAD VEHICLES - TESTS FOR RIGID PLASTIC SAFETY GLAZING MATERIALS
16/30328245 DC : 0 BS ISO 6164 - HYDRAULIC FLUID POWER - FOUR-SCREW, ONE-PIECE SQUARE FLANGE CONNECTIONS FOR USE AT PRESSURES OF 42 MPA, DN 10 TO 80
UNE-ISO 4662:2013 Rubber, vulcanized or thermoplastic — Determination of rebound resilience
12/30238550 DC : 0 BS EN ISO 12945-3 - TEXTILES - DETERMINATION OF THE FABRIC PROPENSITY TO SURFACE PILING, FUZZING OR MATTING - PART 3: RANDOM TUMBLE PILING METHOD
PREN 12274-4 : DRAFT 2016 SLURRY SURFACING - TEST METHODS - PART 4: DETERMINATION OF COHESION OF THE MIX
02/122387 DC : DRAFT JUN 2002 ISO/DIS 7619-2 - RUBBER, VULCANIZED OR THERMOPLASTIC - DETERMINATION OF INDENTATION HARDNESS - PART 2: IRHD POCKET METER METHOD
BS EN ISO 28706-2:2017 Vitreous and porcelain enamels. Determination of resistance to chemical corrosion Determination of resistance to chemical corrosion by boiling acids, boiling neutral liquids, alkaline liquids and/or their vapours
ISO 188:2011 Rubber, vulcanized or thermoplastic — Accelerated ageing and heat resistance tests
04/30123909 DC : DRAFT OCT 2004 ISO 16934 - GLASS IN BUILDING - EXPLOSION-RESISTANT SECURITY GLAZING - TEST AND CLASSIFICATION BY SHOCK TUBE LOADING
DIN EN 1338:2003-08 CONCRETE PAVING BLOCKS - REQUIREMENTS AND TEST METHODS
BS ISO 6118:2006 Road vehicles. Elastomeric cups and seals for cylinders for hydraulic braking systems using a non-petroleum base hydraulic brake fluid (service temperature 70°C max.)
DIN ISO 9211-4 E : 2014 OPTICS AND PHOTONICS - OPTICAL COATINGS - PART 4: SPECIFIC TEST METHODS (ISO 9211-4:2012)
DIN EN 16230-1:2015-04 LEISURE KARTS - PART 1: SAFETY REQUIREMENTS AND TEST METHODS FOR KARTS
BS EN ISO 14903:2017 Refrigerating systems and heat pumps. Qualification of tightness of components and joints
04/30076765 DC : DRAFT MAR 2004 BS ISO 24338 - LAMINATE FLOOR COVERINGS - DETERMINATION OF ABRASION RESISTANCE
03/118041 DC : DRAFT NOV 2003 EN 14188-3 - JOINT FILLERS AND SEALANTS - PART 3: SPECIFICATION FOR PREFORMED JOINT SEALS
10/30210872 DC : 0 BS EN ISO 9117-5 - PAINTS AND VARNISHES - DRYING TESTS - PART 5: MODIFIED BANDOW-WOLFF TEST
04/30046221 DC : 0 PREN 13121-3 - GRP TANKS AND VESSELS FOR USE ABOVE GROUND - PART 3: DESIGN AND WORKMANSHIP
DIN EN 1340:2003-08 CONCRETE KERB UNITS - REQUIREMENTS AND TEST METHODS
14/30314166 DC : 0 BS EN 6109 - AEROSPACE SERIES - STATIC SEAL ELEMENTS ELASTOMER, MOULDED, PHOSPHATE ESTER RESISTANT - TECHNICAL SPECIFICATION
06/30149088 DC : DRAFT SEP 2006 ISO 8362-5 - INJECTION CONTAINERS AND ACCESSORIES - PART 5: FREEZE DRYING CLOSURES FOR INJECTION VIALS
BS ISO 188:2011 Rubber, vulcanized or thermoplastic. Accelerated ageing and heat resistance tests
UNE-CEN/TS 15901-7:2010 IN Road and airfield surface characteristics - Part 7: Procedure for determining the skid resistance of a pavement surface using a device with longitudinal fixed slip ratio (LFCG): the GripTester(r)
DIN EN 15129 E : 2010 ANTI-SEISMIC DEVICES
DD ENV 1455-2:2001 Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure. Acrylonitrile-butadiene- styrene (ABS) Guidance for the assessment of conformity
BS 3900-E14(1997) : 1997 AMD 16870 METHODS OF TEST FOR PAINTS - DETERMINATION OF RESISTANCE TO ABRASION (ROTATING ABRASIVE-PAPER-COVERED WHEEL)
00/716137 DC : DRAFT NOV 2000 BS EN 1178-2 - FURNITURE - HIGH CHAIRS FOR DOMESTIC USE - TEST METHODS
BS ISO 13363:2004 Rubber and plastics hoses for marine-engine wet-exhaust systems. Specification
BS ISO 6194-1:2007 Rotary shaft lip-type seals incorporating elastomeric sealing elements Nominal dimensions and tolerances
S.R. CEN/TS 16165:2016 DETERMINATION OF SLIP RESISTANCE OF PEDESTRIAN SURFACES - METHODS OF EVALUATION
08/30181467 DC : DRAFT JULY 2008 BS EN 15834 - REFRIGERATING SYSTEMS AND HEAT PUMPS - QUALIFICATION OF TIGHTNESS OF COMPONENTS AND JOINTS
BS ISO 614:2012 Ships and marine technology. Toughened safety glass panes for rectangular windows and side scuttles. Punch method of non-destructive strength testing
04/30124225 DC : DRAFT OCT 2004 ISO/DIS 16933 - GLASS IN BUILDING - EXPLOSION-RESISTANT SECURITY GLAZING - TEST AND CLASSIFICATION BY ARENA AIR-BLAST LOADING
04/30095730 DC : DRAFT APR 2004 EN 13832-3 - FOOTWEAR PROTECTING AGAINST CHEMICALS AND MICRO-ORGANISMS - PART 3: FOOTWEAR HIGHLY PROTECTIVE AGAINST CHEMICALS
03/318201 DC : DRAFT NOV 2003 IEC 60502-2, ED.2 - POWER CABLES WITH EXTRUDED INSULATION AND THEIR ACCESSORIES FOR RATED VOLTAGES FROM 1 KV (UM = 1,2 KV) UP TO 30 KV (UM = 36 KV) - PART 2: CABLES FOR RATED VOLTAGES FROM 6 KV (UM = 7,2 KV) UP TO 30 KV (UM = 36 KV)
08/30172616 DC : 0 BS EN ISO 8536-2 - INFUSION EQUIPMENT FOR MEDICAL USE - PART 2: CLOSURES FOR INFUSION BOTTLES
DIN ISO 6162-1:2006-02 HYDRAULIC FLUID POWER - FLANGE CONNECTORS WITH SPLIT OR ONE-PIECE FLANGE CLAMPS AND METRIC OR INCH SCREWS - PART 1: FLANGE CONNECTORS FOR USE AT PRESSURES OF 3,5 MPA (35 BAR) TO 35 MPA (350 BAR), DN 13 TO DN 127
14/30301958 DC : 0 BS EN ISO 8362-2 - INJECTION CONTAINERS AND ACCESSORIES - PART 2: CLOSURES FOR INJECTION
BS ISO 15082:2016 Road vehicles. Tests for rigid plastic safety glazing materials
07/30047007 DC : DRAFT AUG 2007 BS ISO 1288-5 - GLAZING IN BUILDING - DETERMINATION OF THE BENDING STRENGTH OF GLASS - PART 5: COAXIAL DOUBLE-RING TEST ON FLAT SPECIMENS WITH SMALL OR MEDIUM TEST SURFACE AREAS
09/30184526 DC : DRAFT MAY 2009 BS ISO 4666-3 - RUBBER, VULCANIZED - DETERMINATION OF TEMPERATURE RISE AND RESISTANCE TO FATIQUE IN FLEXOMETER TESTING - PART 3: COMPRESSION FLEXOMETER (CONSTANT-STRAIN TYPE)
07/30131694 DC : 0 BS ISO 6194-4 - ROTARY-SHAFT LIP-TYPE SEALS INCORPORATING ELASTOMERIC SEALING ELEMENTS - PART 4: PERFORMANCE TEST PROCEDURES
UNI EN ISO 19879 : 2011 METALLIC TUBE CONNECTIONS FOR FLUID POWER AND GENERAL USE - TEST METHODS FOR HYDRAULIC FLUID POWER CONNECTIONS
10/30201343 DC : 0 BS ISO 5794-3 - RUBBER COMPOUNDING INGREDIENTS - SILICA, PRECIPITATED, HYDRATED - PART 3: EVALUATION PROCEDURES IN A MIXED SOLUTION OF STYRENE-BUTADIENE RUBBER AND BUTADIENE RUBBER
03/110543 DC : DRAFT JUNE 2003 ISO 16939-2 - GLASS IN BUILDING - FORCED-ENTRY SECURITY GLAZING - PART 2: TEST AND CLASSIFICATION BY REPETITIVE IMPACT OF A HAMMER AND AXE AT ROOM TEMPERATURE
SAE J 1926/3 : 2016 CONNECTIONS FOR GENERAL USE AND FLUID POWER - PORTS AND STUD ENDS WITH ASME B1.1 THREADS AND O-RING SEALING - PART 3: LIGHT-DUTY (L-SERIES) STUD ENDS
PREN 14420-8 : DRAFT 2010 HOSE FITTINGS WITH CLAMP UNITS - PART 8: SYMMETRICAL HALF COUPLING (GUILLEMIN SYSTEM)
S.R. CEN/TS 12697-50:2016 BITUMINOUS MIXTURES - TEST METHODS - PART 50: RESISTANCE TO SCUFFING
06/30149441 DC : DRAFT SEP 2006 ISO 8362-5 - INJECTION CONTAINERS AND ACCESSORIES - PART 5: FREEZE DRYING CLOSURES FOR INJECTION VIALS
ISO 14903:2017 Refrigerating systems and heat pumps — Qualification of tightness of components and joints
05/30127096 DC : DRAFT FEB 2005 ISO 6149-4 - CONNECTIONS FOR FLUID POWER AND GENERAL USE - PORTS AND STUD ENDS WITH METRIC THREADS AND O-RING SEALING - PART 4: DIMENSIONS, DESIGN, TEST METHODS AND REQUIREMENTS FOR EXTERNAL HEX AND INTERNAL HEX PORT PLUGS
NF EN 15129 : 2010 ANTI-SEISMIC DEVICES
09/30193391 DC : DRAFT MAY 2009 BS ISO 7619-1 - RUBBER, VULCANIZED OR THERMOPLASTIC - DETERMINATION OF INDENTATION HARDNESS - PART 1: DUROMETER METHOD (SHORE HARDNESS)
IEC 60544-4:2003 Electrical insulating materials - Determination of the effects of ionizing radiation - Part 4: Classification system for service in radiation environments
EN ISO 10555-6:2017 Intravascular catheters - Sterile and single-use catheters - Part 6: Subcutaneous implanted ports (ISO 10555-6:2015)
05/30135261 DC : DRAFT JUN 2005 ISO 1179-3 - CONNECTIONS FOR GENERAL USE AND FLUID POWER - PORTS AND STUD ENDS WITH ISO 228-1 THREADS WITH ELASTOMERIC OR METAL-TO-METAL SEALING - PART 3: LIGHT-DUTY (L SERIES) STUD ENDS WITH SEALING BY O-RING WITH RETAINING RING (TYPES G AND H)
ONORM EN ISO 8434-1 : 2009 METALLIC TUBE CONNECTIONS FOR FLUID POWER AND GENERAL USE - PART 1: 24 DEGREE CONE CONNECTORS
06/30159668 DC : 0 BS EN 50508 - MULTI-PURPOSE INSULATING STICKS FOR ELECTRICAL OPERATIONS ON HIGH VOLTAGE INSTALLATIONS
NF ISO 8434-6 : 2009 METALLIC TUBE CONNECTIONS FOR FLUID POWER AND GENERAL USE - PART 6: 60 DEGREES CONE CONNECTORS WITH OR WITHOUT O-RING
CEI EN 60544-4 : 2005 ELECTRICAL INSULATING MATERIALS - DETERMINATION OF THE EFFECTS OF IONIZING RADIATION - PART 4: CLASSIFICATION SYSTEM FOR SERVICE IN RADIATION ENVIRONMENTS
ISO 4635:2011 Rubber, vulcanized Preformed joint seals for use between concrete paving sections of highways Specification
DIN ISO 6162-2:2006-02 HYDRAULIC FLUID POWER - FLANGE CONNECTORS WITH SPLIT OR ONE-PIECE FLANGE CLAMPS AND METRIC OR INCH SCREWS - PART 2: FLANGE CONNECTORS FOR USE AT PRESSURES OF 35 MPA (350 BAR) TO 40 MPA (400 BAR), DN 13 TO DN 51
PREN 6109 : 200P2 AEROSPACE SERIES - STATIC SEAL ELEMENTS ELASTOMER, MOULDED, PHOSPHATE ESTER RESISTANT - TECHNICAL SPECIFICATION
PREN 15129 : DRAFT 2017 ANTI-SEISMIC DEVICES
ISO 4928:2006 Road vehicles Elastomeric cups and seals for cylinders for hydraulic braking systems using a non-petroleum base hydraulic brake fluid (Service temperature 120 degrees C max.)
UNI CEN/TS 15901-4 : 2010 ROAD AND AIRFIELD SURFACE CHARACTERISTICS - PART 4: PROCEDURE FOR DETERMINING THE SKID RESISTANCE OF PAVEMENTS USING A DEVICE WITH LONGITUDINAL CONTROLLED SLIP (LFCT): TATRA RUNWAY TESTER (TRT)
I.S. EN ISO 23936-2:2011 PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - NON-METALLIC MATERIALS IN CONTACT WITH MEDIA RELATED TO OIL AND GAS PRODUCTION - PART 2: ELASTOMERS (ISO 23936-2:2011)
ISO 4927:2005 Road vehicles — Elastomeric boots for cylinders for drum type hydraulic brake wheel cylinders using a non-petroleum base hydraulic brake fluid (Service temperature 120 degrees C max.)
ISO 6118:2006 Road vehicles Elastomeric cups and seals for cylinders for hydraulic braking systems using a non-petroleum base hydraulic brake fluid (service temperature 70 degrees C max.)
UNE-EN 61230:2011 Live working - Portable equipment for earthing or earthing and short-circuiting
DIN EN 1081:1998-04 RESILIENT FLOOR COVERINGS - DETERMINATION OF THE ELECTRICAL RESISTANCE
BS EN ISO 18797-1:2017 Petroleum, petrochemical and natural gas industries. External corrosion protection of risers by coatings and linings Elastomeric coating systems-polychloroprene or EPDM
ISO 22762-1:2010 Elastomeric seismic-protection isolators Part 1: Test methods
PREN 1097-8 : DRAFT 2016 TESTS FOR MECHANICAL AND PHYSICAL PROPERTIES OF AGGREGATES - PART 8: DETERMINATION OF THE POLISHED STONE VALUE
I.S. EN ISO 14903:2017 REFRIGERATING SYSTEMS AND HEAT PUMPS - QUALIFICATION OF TIGHTNESS OF COMPONENTS AND JOINTS (ISO 14903:2017)
XP S54 046 : 2005 XP TYPE GROUP 0/0+ INFANT SAFETY SEATS - CARRYING FUNCTION - SAFETY REQUIREMENTS AND TEST METHODS
ISO 13926-3:2012 Pen systems Part 3: Seals for pen-injectors for medical use
I.S. EN 12274-4:2003 SLURRY SURFACING - TEST METHODS - PART 4: DETERMINATION OF COHESION OF THE MIX
UNI ISO 3387 : 2013 RUBBER - DETERMINATION OF CRYSTALLIZATION EFFECTS BY HARDNESS MEASUREMENTS
API TR 17TR8 : 2018 HIGH-PRESSURE HIGH-TEMPERATURE DESIGN GUIDELINES
ISO 28706-3:2017 Vitreous and porcelain enamels — Determination of resistance to chemical corrosion — Part 3: Determination of resistance to chemical corrosion by alkaline liquids using a hexagonal vessel or a tetragonal glass bottle
ISO 12046:2012 Synchronous belt drives — Automotive belts — Determination of physical properties
ISO 6162-2:2018 Hydraulic fluid power — Flange connections with split or one-piece flange clamps and metric or inch screws — Part 2: Flange connectors, ports and mounting surfaces for use at a pressure of 42 MPa (420 bar), DN 13 to DN 76
BS ISO 18517:2015 Rubber, vulcanized or thermoplastic. Hardness testing. Introduction and guide
XP CEN/TS 15901-13 : 2011 XP ROAD AND AIRFIELD SURFACE CHARACTERISTICS - PART 13: PROCEDURE FOR DETERMINING THE SKID RESISTANCE OF A PAVEMENT SURFACE BY MEASUREMENT OF A SIDEWAY FORCE COEFFICIENT (SFCO): THE ODOLIOGRAPH
ISO 23550:2011 Safety and control devices for gas burners and gas-burning appliances General requirements
ISO 4666-4:2007 Rubber, vulcanized Determination of temperature rise and resistance to fatigue in flexometer testing Part 4: Constant-stress flexometer
ISO 9352:2012 Plastics — Determination of resistance to wear by abrasive wheels
17/30359853 DC : 0 BS EN 17142 - MODULAR MULTILAYER FLOOR COVERINGS - ELEMENTS WITH A WOOD POWDER BASED SURFACE LAYER - SPECIFICATIONS, REQUIREMENTS AND TEST METHODS
NF ISO 7619-2 : 2010 RUBBER, VULCANIZED OR THERMOPLASTIC - DETERMINATION OF INDENTATION HARDNESS - PART 2: IRHD POCKET METER METHOD
BS ISO 8434-3:2005 Metallic tube connections for fluid power and general use O-ring face seal connectors
10/30217328 DC : 0 BS EN 1340 - CONCRETE KERB UNITS - REQUIREMENTS AND TEST METHODS
13/30288859 DC : 0 BS EN 12697-22 - BITUMINOUS MIXTURES - TEST METHODS FOR HOT MIX ASPHALT - PART 22: WHEEL TRACKING
ISO 1288-5:2016 Glass in building — Determination of the bending strength of glass — Part 5: Coaxial double ring test on flat specimens with small test surface areas
UNE-EN ISO 10545-4:2015 Ceramic tiles - Part 4: Determination of modulus of rupture and breaking strength (ISO 10545-4:2014)
I.S. EN ISO 6149-4:2017 CONNECTIONS FOR FLUID POWER AND GENERAL USE - PORTS AND STUD ENDS WITH ISO 261 METRIC THREADS AND O-RING SEALING - PART 4: DIMENSIONS, DESIGN, TEST METHODS AND REQUIREMENTS FOR EXTERNAL HEX AND INTERNAL HEX PORT PLUGS (ISO 6149-4:2017)
ASTM D 1415 : 2006 Standard Test Method for Rubber Property—International Hardness
CEI EN 60068-2-31 : 2011 ENVIRONMENTAL TESTING - PART 2-31: TESTS - TEST EC: ROUGH HANDLING SHOCKS, PRIMARILY FOR EQUIPMENT-TYPE SPECIMENS
CEI EN 60512-7-1 : 2011 CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 7-1: IMPACT TESTS (FREE CONNECTORS) - TEST 7A: FREE FALL (REPEATED)
IEC 60502-1:2004+AMD1:2009 CSV Power cables with extruded insulation and their accessories for rated voltages from 1 kV (<em>U</em><sub>m</sub> = 1,2 kV) up to 30 kV(<em>U</em><sub>m</sub> = 36 kV) - Part 1: Cables for rated voltages of 1 kV (<em>U</em><sub>m</sub> = 1,2 kV) and 3 kV (<em>U</em><sub>m</sub> = 3,6 kV)
ISO 5423:1992 Moulded plastics footwear — Lined or unlined polyurethane boots for general industrial use — Specification
DIN EN ISO 19879:2011-01 Metallic tube connections for fluid power and general use - Test methods for hydraulic fluid power connections (ISO 19879:2010)
ISO 6111:1982 Rubber footwear Lined or unlined rubber industrial boots with chemical resistance
ASTM F 2772 : 2011 : REDLINE Standard Specification for Athletic Performance Properties of Indoor Sports Floor Systems
ISO 7076-4:2016 Fire protection Foam fire extinguishing systems Part 4: High expansion foam equipment
ISO 21690:2006 Glass in building Glass blocks Specification and test methods
EN 12274-5:2018 Slurry surfacing - Test method - Part 5: Determination of the minimum binder content and wearing resistance
ISO 6194-1:2007 Rotary shaft lip-type seals incorporating elastomeric sealing elements — Part 1: Nominal dimensions and tolerances
IEC 60079-0 REDLINE : 7.0 EXPLOSIVE ATMOSPHERES - PART 0: EQUIPMENT - GENERAL REQUIREMENTS
I.S. EN 60512-7-1:2010 CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 7-1: IMPACT TESTS (FREE CONNECTORS) - TEST 7A: FREE FALL (REPEATED)
ISO 29584:2015 Glass in building — Pendulum impact testing and classification of safety glass
ISO 6162:1994 Hydraulic fluid power Four-screw split-flange connections for use at pressures of 2,5 MPa to 40 MPa (25 bar to 400 bar) Type I metric series and type II inch series
ISO 15759:2005 Medical infusion equipment — Plastics caps with inserted elastomeric liner for containers manufactured by the blow-fill-seal (BFS) process
NF EN 13150 : 2001 WORKBENCHES FOR LABORATORIES - DIMENSIONS, SAFETY REQUIREMENTS AND TEST METHODS
DIN EN ISO 6149-3:2007-05 Connections for hydraulic fluid power and general use - Ports and stud ends with ISO 261 metric threads and O-ring sealing - Part 3: Dimensions, design, test methods and requirements for light-duty (L series) stud ends (ISO 6149-3:2006)
DIN EN 14354 E : 2017 WOOD-BASED PANELS - WOOD VENEER FLOOR COVERINGS
DIN EN 15330-1:2013-12 SURFACES FOR SPORTS AREAS - SYNTHETIC TURF AND NEEDLE-PUNCHED SURFACES PRIMARILY DESIGNED FOR OUTDOOR USE - PART 1: SPECIFICATION FOR SYNTHETIC TURF SURFACES FOR FOOTBALL, HOCKEY, RUGBY UNION TRAINING, TENNIS AND MULTI-SPORTS USE
DIN EN 14231 E : 2003 NATURAL STONE TEST METHODS - DETERMINATION OF THE SLIP RESISTANCE BY MEANS OF THE PENDULUM TESTER
DIN EN ISO 6149-2:2007-05 Connections for hydraulic fluid power and general use - Ports and stud ends with ISO 261 metric threads and O-ring sealing - Part 2: Dimensions, design, test methods and requirements for heavy-duty (S series) stud ends (ISO 6149-2:2006)
DIN EN 13541:2012-06 GLASS IN BUILDING - SECURITY GLAZING - TESTING AND CLASSIFICATION OF RESISTANCE AGAINST EXPLOSION PRESSURE
DIN EN ISO 8536-2:2010-08 Infusion equipment for medical use - Part 2: Closures for infusion bottles (ISO 8536-2:2010)
BS EN ISO 8871:1997 Elastomeric parts for aqueous parenteral preparations
UNE-EN 13036-4:2012 Road and airfield surface characteristics - Test methods - Part 4: Method for measurement of slip/skid resistance of a surface: The pendulum test
EN 1097-2:2010 Tests for mechanical and physical properties of aggregates - Part 2: Methods for the determination of resistance to fragmentation
UNE-EN ISO 5470-1:2017 Rubber- or plastics-coated fabrics - Determination of abrasion resistance - Part 1: Taber abrader (ISO 5470-1:2016)
BS EN 1825-1:2004 Grease separators Principles of design, performance and testing, marking and quality control
BS EN ISO 3822-4:1997 Acoustics. Laboratory tests on noise emission from appliances and equipment used in water supply installations Mounting and operating conditions for special appliances
BS EN 12600:2002 Glass in building. Pendulum test. Impact test method and classification for flat glass
BS EN ISO 9974-2:2000 Connections for general use and fluid power. Ports and stud ends with ISO 261 threads with elastomeric or metal-to-metal sealing Stud ends with elastomeric sealing (type E)
BS EN 14483-2:2004 Vitreous and porcelain enamels. Determination of resistance to chemical corrosion Determination of resistance to chemical corrosion by boiling acids, neutral liquids and/or their vapours
ISO 23936-2:2011 Petroleum, petrochemical and natural gas industries — Non-metallic materials in contact with media related to oil and gas production — Part 2: Elastomers
BS EN ISO 6149-2:2007 Connections for hydraulic fluid power and general use. Ports and stud ends with ISO 261 metric threads and O-ring sealing Dimensions, design, test methods and requirements for heavy-duty (S series) stud ends
BS EN 13071:2002 Selective waste collection containers. Above-ground mechanically-lifted containers with capacity from 80 l to 5000 l for selective collection of waste
BS EN ISO 8871-2 : 2004 ELASTOMERIC PARTS FOR PARENTERALS AND FOR DEVICES FOR PHARMACEUTICAL USE - PART 2: IDENTIFICATION AND CHARACTERIZATION
BS EN 858-1:2002 Separator systems for light liquids (e.g. oil and petrol) Principles of product design, performance and testing, marking and quality control
BS EN ISO 8980-5:2005 Ophthalmic optics. Uncut finished spectacle lenses Minimum requirements for spectacle lens surfaces claimed to be abrasion-resistant
BS EN ISO 19879:2010 Metallic tube connections for fluid power and general use. Test methods for hydraulic fluid power connections
DIN EN ISO 8980-4:2006-11 Ophthalmic optics - Uncut finished spectacle lenses - Part 4: Specifications and test methods for anti-reflective coatings (ISO 8980-4:2006)
EN 1339:2003/AC:2006 CONCRETE PAVING FLAGS - REQUIREMENTS AND TEST METHODS
EN 13071-1:2008/AC:2010 STATIONARY WASTE CONTAINERS UP TO 5000 L, TOP LIFTED AND BOTTOM EMPTIED - PART 1: GENERAL REQUIREMENTS
CEN/TS 16165:2016 Determination of slip resistance of pedestrian surfaces - Methods of evaluation
EN 50508:2009 Multi-purpose insulating sticks for electrical operations on high voltage installations
CEN/TS 15901-8:2009 Road and airfield surface characteristics - Part 8: Procedure for determining the skid resistance of a pavement surface by measurement of the sideway-force coefficient (SFCD): SKM
EN 12272-3:2003 Surface dressing - Test method - Part 3: Determination of binder aggregate adhesivity by the Vialit plate shock test method
EN 12600:2002 Glass in building - Pendulum test - Impact test method and classification for flat glass
ONORM EN ISO 12945-3 : 2014 TEXTILES - DETERMINATION OF THE FABRIC PROPENSITY TO SURFACE PILLING, FUZZING OR MATTING - PART 3: RANDOM TUMBLE PILLING METHOD (ISO 12945-3:2014)
EN 60544-4:2003 Electrical insulating materials - Determination of the effects of ionizing radiation - Part 4: Classification system for service in radiation environments
EN 12227-2 : 1999 PLAYPENS FOR DOMESTIC USE - PART 2: TEST METHODS
EN 1063:1999 Glass in building - Security glazing - Testing and classification of resistance against bullet attack
EN 1337-3:2005 Structural bearings - Part 3: Elastomeric bearings
CEN/TS 15901-7:2009 Road and airfield surface characteristics - Part 7: Procedure for determining the skid resistance of a pavement surface using a device with longitudinal fixed slip ratio (LFCG): the GripTester®
EN 13380:2001 General requirements for components used for renovation and repair of drain and sewer systems outside buildings
EN 12697-38:2004 Bituminous mixtures - Test methods for hot mix asphalt - Part 38: Common equipment and calibration
EN 1344:2013/AC:2015 CLAY PAVERS - REQUIREMENTS AND TEST METHODS
EN 60512-7-1:2010 Connectors for electronic equipment - Tests and measurements - Part 7-1: Impact tests (free connectors) - Test 7a: Free fall (repeated)
EN 60544-2:2012 Electrical insulating materials - Determination of the effects of ionizing radiation on insulating materials - Part 2: Procedures for irradiation and test
EN 60068-2-31:2008 ENVIRONMENTAL TESTING - PART 2-31: TESTS - TEST EC: ROUGH HANDLING SHOCKS, PRIMARILY FOR EQUIPMENT-TYPE SPECIMENS
DIN EN 14231:2003-07 Natural stone test methods - Determination of the slip resistance by means of the pendulum tester; German version EN 14231:2003
DIN EN ISO 4869-3:2007-09 Acoustics - Hearing protectors - Part 3: Measurement of insertion loss of ear-muff type protectors using an acoustic test fixture (ISO 4869-3:2007); German version EN ISO 4869-3:2007
DIN EN 527-3:2003-06 OFFICE FURNITURE - WORK TABLES AND DESKS - PART 3: METHODS OF TEST FOR THE DETERMINATION OF THE STABILITY AND THE MECHANICAL STRENGTH OF THE STRUCTURE
DIN 19538-10:1999-12 PIPES AND FITTINGS MADE OF CHLORINATED POLYVINYL CHLORIDE (PVC-C) FOR HOT-WATER RESISTANT WASTE AND SOIL DISCHARGE SYSTEMS INSIDE BUILDINGS - PART 10: FIRE BEHAVIOUR, QUALITY CONTROL AND INSTALLATION RECOMMENDATIONS
DIN EN 1825-1:2004-12 Grease separators - Part 1: Principles of design, performance and testing, marking and quality control; German version EN 1825-1:2004
DIN EN 14354:2017-11 WOOD-BASED PANELS - WOOD VENEER FLOOR COVERINGS
DIN ISO 13926-2:2012-09 PEN SYSTEMS - PART 2: PLUNGER STOPPERS FOR PEN-INJECTORS FOR MEDICAL USE (ISO 13926-2:2011)
DIN ISO 9211-4:2014-05 Optics and photonics - Optical coatings - Part 4: Specific test methods (ISO 9211-4:2012)
EN 61241-0:2006 Electrical apparatus for use in the presence of combustible dust - Part 0: General requirements
BS 3900-C3(1990) : AMD 7501 METHODS OF TEST FOR PAINTS - THROUGH DRY TEST
UNE-EN 14982:2007 Plastics piping and ducting systems - Thermoplastics shafts or risers for inspection chambers and manholes - Determination of ring stiffness
BS 2782-3.365C(1992) : 1992 AMD 10694 PLASTICS - DETERMINATION OF HARDNESS - PART 2: ROCKWELL HARDNESS
BS 2011-2.1ED(1992) : 1992 AMD 7920 ENVIRONMENTAL TESTING - TESTS - FREE FALL
ONORM EN ISO 12311 : 2015 PERSONAL PROTECTIVE EQUIPMENT - TEST METHODS FOR SUNGLASSES AND RELATED EYEWEAR (ISO 12311:2013, CORRECTED VERSION 2014-08-15)

ISO 7619-1:2010 Rubber, vulcanized or thermoplastic Determination of indentation hardness Part 1: Durometer method (Shore hardness)
ISO 7267-2:2008 Rubber-covered rollers Determination of apparent hardness Part 2: Shore-type durometer method
ISO 23529:2016 Rubber General procedures for preparing and conditioning test pieces for physical test methods
AS 1337.0:2020 Personal protective equipment Eye and face protection - Vocabulary
ISO 7267-3:2017 Rubber-covered rollers Determination of apparent hardness Part 3: Pusey and Jones method
ISO 7619-2:2010 Rubber, vulcanized or thermoplastic Determination of indentation hardness Part 2: IRHD pocket meter method
ISO 7743:2017 Rubber, vulcanized or thermoplastic Determination of compression stress-strain properties
ISO 18898:2016 Rubber Calibration and verification of hardness testers
AS 1301.420:2019 Methods of test for pulp and paper Gurley air permeance of paper (ISO 5636-5:2013, MOD)
ISO/TR 9272:2005 Rubber and rubber products Determination of precision for test method standards
ISO 7267-1:2017 Rubber-covered rollers Determination of apparent hardness Part 1: IRHD method
ISO 18517:2015 Rubber, vulcanized or thermoplastic Hardness testing Introduction and guide

View more information
$118.72
Including GST where applicable

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.

Need help?
Call us on 131 242, then click here to start a Screen Sharing session
so we can help right away! Learn more