ISO 5168:2005
Current
The latest, up-to-date edition.
Measurement of fluid flow — Procedures for the evaluation of uncertainties
Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users
English
15-06-2005
ISO 5168:2005 establishes general principles and describes procedures for evaluating the uncertainty of a fluid flow-rate or quantity.
A step-by-step procedure for calculating uncertainty is given.
Committee |
ISO/TC 30
|
DevelopmentNote |
Supersedes ISO/DIS 5168 & ISO TR 5168. (06/2005)
|
DocumentType |
Standard
|
Pages |
65
|
PublisherName |
International Organization for Standardization
|
Status |
Current
|
Supersedes |
Standards | Relationship |
UNE-ISO 5168:2006 | Identical |
NEN ISO 5168 : 2005 | Identical |
AS 3778.2.4-2007 | Identical |
BS ISO 5168:2005 | Identical |
PN ISO 5168 : 2008 | Identical |
IS 17288 : 2021 | Identical |
BS 5844:1980 | Identical |
NFX 10 106 : 1983 FD | Similar to |
10/30218038 DC : DRAFT MAY 2010 | BS ISO 15112 - NATURAL GAS - ENERGY DETERMINATION |
16/30333424 DC : 0 | BS ISO 12764 - MEASUREMENT OF FLUID FLOW IN CLOSED CONDUITS - FLOWRATE MEASUREMENT BY MEANS OF VORTEX SHEDDING FLOWMETERS INSERTED IN CIRCULAR CROSS-SECTION CONDUITS RUNNING FULL |
ISO 1088:2007 | Hydrometry Velocity-area methods using current-meters Collection and processing of data for determination of uncertainties in flow measurement |
17/30326671 DC : 0 | BS ISO 27919-1 - CARBON DIOXIDE CAPTURE - PART 1: PERFORMANCE EVALUATION METHODS FOR POST-COMBUSTION CO[2] CAPTURE INTEGRATED WITH A POWER PLANT |
BS ISO 19970:2017 | Refrigerated hydrocarbon and non-petroleum based liquefied gaseous fuels. Metering of gas as fuel on LNG carriers during cargo transfer operations |
ISO 2715:2017 | Liquid hydrocarbons — Volumetric measurement by turbine flowmeter |
EN ISO 5801:2017 | Fans - Performance testing using standardized airways (ISO 5801:2017) |
BS ISO 10790:2015 | Measurement of fluid flow in closed conduits. Guidance to the selection, installation and use of Coriolis flowmeters (mass flow, density and volume flow measurements) |
ISO 8178-1:2017 | Reciprocating internal combustion engines Exhaust emission measurement Part 1: Test-bed measurement systems of gaseous and particulate emissions |
09/30190929 DC : 0 | BS ISO 29042-5 - SAFETY OF MACHINERY - EVALUATION OF THE EMISSION OF AIRBORNE HAZARDOUS SUBSTANCES - PART 5: TEST BENCH METHOD FOR THE MEASUREMENT OF THE SEPARATION EFFICIENCY BY MASS OF AIR CLEANING SYSTEMS WITH UNDUCTED OUTLET |
BS ISO 17089-1:2010 | Measurement of fluid flow in closed conduits. Ultrasonic meters for gas Meters for custody transfer and allocation measurement |
15/30321263 DC : 0 | BS EN 62828-5 ED. 1.0 - PROCEDURES FOR TESTING INDUSTRIAL AND PROCESS MEASUREMENT TRANSMITTERS - PART 5: SPECIFIC PROCEDURES FOR FLOW TRANSMITTERS |
16/30313383 DC : 0 | BS ISO 19970 - REFRIGERATED HYDROCARBON AND NON-PETROLEUM BASED LIQUEFIED GASEOUS FUELS - METERING OF GAS AS FUEL ON LNG CARRIERS DURING CARGO TRANSFER OPERATIONS |
BS 7526(1991) : 1991 AMD 7980 | METHODS OF EVALUATING THE PERFORMANCE OF ELECTROMAGNETIC FLOWMETERS |
DIN EN 12405-3:2016-04 | Gas meters - Conversion devices - Part 3: Flow computer |
CGSB-157.6 : M91 | LIQUID FLOW MEASUREMENT IN OPEN CHANNELS - VELOCITY-AREA METHODS - COLLECTION AND PROCESSING OF DATA FOR DETERMINATION OF ERRORS IN MEASUREMENT |
UNI 11363 : 2010 | COMBUSTIBLE GASES - MEASUREMENTS OF FLOW RATE AND QUANTITY - METROLOGICAL TRACEABILITY |
ISO 29042-1:2008 | Safety of machinery — Evaluation of the emission of airborne hazardous substances — Part 1: Selection of test methods |
ISO 29042-9:2011 | Safety of machinery Evaluation of the emission of airborne hazardous substances Part 9: Decontamination index |
API MPM CH13.3 : 2017 | MANUAL OF PETROLEUM MEASUREMENT STANDARDS - CHAPTER 13.3: MEASUREMENT UNCERTAINTY |
BS EN 12405-1 : 2005 | GAS METERS - CONVERSION DEVICES - PART 1: VOLUME CONVERSION |
S.R. CEN/TR 16787:2014 | INDUSTRIAL GAS INSTALLATION - GUIDELINE |
I.S. EN ISO 15112:2014 | NATURAL GAS - ENERGY DETERMINATION (ISO 15112:2011) |
BS 3680-3B:1983 | Measurement of liquid flow in open channels. Stream flow measurement Guide for establishment and operation of a gauging station |
17/30356734 DC : 0 | BS EN 14236 - ULTRASONIC DOMESTIC GAS METERS |
EN ISO 6416:2017 | Hydrometry - Measurement of discharge by the ultrasonic transit time (time of flight) method (ISO 6416:2017) |
EN 12261:2018 | Gas meters - Turbine gas meters |
NF EN 62006 : 2011 | HYDRAULIC MACHINES - ACCEPTANCE TESTS OF SMALL HYDROELECTRIC INSTALLATIONS |
ISO 16956:2015 | Thermal performance in the built environment Determination of air flow rate in building applications by field measuring methods |
UNE-EN ISO 5801:2010 | Industrial fans - Performance testing using standardized airways (ISO 5801:2007 including Cor 1:2008) |
IEC 60193:1999 | Hydraulic turbines, storage pumps and pump-turbines - Model acceptance tests |
ISO 4359:2013 | Flow measurement structures — Rectangular, trapezoidal and U-shaped flumes |
DIN EN 24006:1993-08 | Measurement of fluid flow in closed conduits; vocabulary and symbols (ISO 4006:1991); German version EN 24006:1993 |
ISO/TS 25377:2007 | Hydrometric uncertainty guidance (HUG) |
BS EN ISO 748:2007 | Hydrometry. Measurement of liquid flow in open channels using current-meters or floats |
BS EN ISO 14111:1999 | Natural gas. Guidelines to traceability in analysis |
EN 1093-6:1998+A1:2008 | Safety of machinery - Evaluation of the emission of airborne hazardous substances - Part 6: Separation efficiency by mass, unducted outlet |
EN 12405 : 2002 | GAS METERS - GAS-VOLUME ELECTRONIC CONVERSION DEVICES |
CEN ISO/TS 25377:2007 | Hydrometric uncertainty guidance (HUG) (ISO/TS 25377:2007) |
DIN EN ISO 748:2008-02 | Hydrometry - Measurement of liquid flow in open channels using current-meters or floats (ISO 748:2007) |
BS 3680-4G:1990 | Methods of measurement of liquid flow in open channels. Weirs and flumes Flat-V weirs |
I.S. EN 60193:2000 | HYDRAULIC TURBINES, STORAGE PUMPS AND PUMP-TURBINES - MODEL ACCEPTANCE TESTS (IEC 60193:1999) |
DD CEN ISO/TS 25377:2007 | Hydrometric uncertainty guide |
PD ISO/TR 26762:2008 | Natural gas. Upstream area. Allocation of gas and condensate |
ISO/TR 12748:2015 | Natural Gas Wet gas flow measurement in natural gas operations |
BS 2000-476(2002) : 2002 | METHODS OF TEST FOR PETROLEUM AND ITS PRODUCTS - BS 2000-476: PETROLEUM LIQUIDS - AUTOMATIC PIPELINE SAMPLING |
PREN 12405-1 : DRAFT 2017 | GAS METERS - CONVERSION DEVICES - PART 1: VOLUME CONVERSION |
16/30319087 DC : 0 | BS ISO 9123 - MEASUREMENT OF LIQUID FLOW IN OPEN CHANNELS - STAGE-FALL-DISCHARGE RELATIONSHIPS |
I.S. EN 12405:2002 | GAS METERS - GAS-VOLUME ELECTRONIC CONVERSION DEVICES |
95/213867 DC : DRAFT OCT 1995 | BS ISO 13550 - MEASUREMENT OF LIQUID FLOW IN OPEN CHANNELS BY WEIRS AND FLUMES - VERTICAL UNDERFLOW GATES AND RADIAL GATES |
16/30334068 DC : 0 | BS ISO 8178-4 - RECIPROCATING INTERNAL COMBUSTION ENGINES - EXHAUST EMISSION MEASUREMENT - PART 4: STEADY-STATE TEST CYCLES FOR DIFFERENT ENGINE APPLICATIONS |
CEN/TR 16787:2014 | Industrial Gas Installation - Guideline |
96/702049 DC : 0 | PREN ISO 917 - TESTING OF REFRIGERANT COMPRESSORS |
BS 3680-3H:1993 | Measurement of liquid flow in open channels. Stream flow measurement Electromagnetic method using a full-channel-width coil |
BS EN ISO 5801:2017 | Fans. Performance testing using standardized airways |
16/30346580 DC : 0 | BS EN 13771-2 - COMPRESSORS AND CONDENSING UNITS FOR REFRIGERATION - PERFORMANCE TESTING AND TEST METHODS - PART 2: CONDENSING UNITS |
ISO/TR 7066-1:1997 | Assessment of uncertainty in calibration and use of flow measurement devices — Part 1: Linear calibration relationships |
DIN EN ISO 5167-5 E : 2016 | MEASUREMENT OF FLUID FLOW BY MEANS OF PRESSURE DIFFERENTIAL DEVICES INSERTED IN CIRCULAR CROSS-SECTION CONDUITS RUNNING FULL - PART 5: CONE METERS (ISO 5167-5:2016) |
BS ISO 2425:2010 | Hydrometry. Measurement of liquid flow in open channels under tidal conditions |
BS ISO 9123:2017 | Hydrometry. Stage-fall-discharge relationships |
PD IEC/TS 62282-7-2:2014 | Fuel cell technologies Test methods. Single cell and stack performance tests for solid oxide fuel cells (SOFC) |
BS ISO 2715:2017 | Liquid hydrocarbons. Volumetric measurement by turbine flowmeter Volumetric measurement by turbine meter systems |
BS ISO 16956:2015 | Thermal performance in the built environment. Determination of air flow rate in building applications by field measuring methods |
BS ISO 15112 : 2011 | NATURAL GAS - ENERGY DETERMINATION |
PD ISO/TR 12748:2015 | Natural Gas. Wet gas flow measurement in natural gas operations |
PREN 13053 : DRAFT 2017 | VENTILATION FOR BUILDINGS - AIR HANDLING UNITS - RATING AND PERFORMANCE FOR UNITS, COMPONENTS AND SECTIONS |
BS ISO 8178-2:2008 | Reciprocating internal combustion engines. Exhaust emission measurement Measurement of gaseous and particulate exhaust emissions under field conditions |
DIN EN ISO 15112:2014-09 | Natural gas - Energy determination (ISO 15112: 2011) |
UNE-EN 12405-3:2016 | Gas meters - Conversion devices - Part 3: Flow computer |
ISO 6421:2012 | Hydrometry — Methods for assessment of reservoir sedimentation |
I.S. EN ISO 5801:2017 | FANS - PERFORMANCE TESTING USING STANDARDIZED AIRWAYS (ISO 5801: 2017) |
API MPM CH14.3.1 : 2012 : INC : ERR 1 : 2013 | ORIFICE METERING OF NATURAL GAS AND OTHER RELATED HYDROCARBON FLUIDS - CONCENTRIC, SQUARE-EDGED ORIFICE METERS - PART 1: GENERAL EQUATIONS AND UNCERTAINTY GUIDELINES |
ISO 13348:2007 | Industrial fans — Tolerances, methods of conversion and technical data presentation |
BS ISO 14511:2001 | Measurement of fluid flow in closed conduits. Thermal mass flowmeters |
DIN EN ISO 15112 E : 2014 | NATURAL GAS - ENERGY DETERMINATION (ISO 15112:2011) |
AGA XQ0701 : 0 | AGA REPORT NO. 9, MEASUREMENT OF GAS BY MULTIPATH ULTRASONIC METERS |
ISO 29042-6:2010 | Safety of machinery Evaluation of the emission of airborne hazardous substances Part 6: Test bench method for the measurement of the separation efficiency by mass of air cleaning systems with ducted outlet |
ISO 12242:2012 | Measurement of fluid flow in closed conduits Ultrasonic transit-time meters for liquid |
ISO 6416:2017 | Hydrometry — Measurement of discharge by the ultrasonic transit time (time of flight) method |
BS EN ISO 6416:2005 | Hydrometry. Measurement of discharge by the ultrasonic (acoustic) method |
AMCA 210 : 2016 | LABORATORY METHODS OF TESTING FANS FOR CERTIFIED AERODYNAMIC PERFORMANCE RATING |
RM.AERO 80711 : 1982 | MEASUREMENTS OF STEADY STATE FLUID FLOW - GENERAL INSTRUCTIONS |
EN 14236:2007 | Ultrasonic domestic gas meters |
IEC 62006:2010 | Hydraulic machines - Acceptance tests of small hydroelectric installations |
S.R. CEN/TR 12101-4:2009 | SMOKE AND HEAT CONTROL SYSTEMS - PART 4: INSTALLED SHEVS SYSTEMS FOR SMOKE AND HEAT VENTILATION |
I.S. EN 13053:2006 | VENTILATION FOR BUILDINGS - AIR HANDLING UNITS - RATING AND PERFORMANCE FOR UNITS, COMPONENTS AND SECTIONS |
DIN EN 1359:2007-06 | GAS METERS - DIAPHRAGM GAS METERS |
DIN EN ISO 9300 E : 2005 | MEASUREMENT OF GAS FLOW BY MEANS OF CRITICAL FLOW - VENTURI NOZZLES |
DIN EN 13771-1:2015-01 (Draft) | COMPRESSORS AND CONDENSING UNITS FOR REFRIGERATION - PERFORMANCE TESTING AND TEST METHODS - PART 1: REFRIGERANT COMPRESSORS |
DIN EN 13771-2:2016-11 (Draft) | COMPRESSORS AND CONDENSING UNITS FOR REFRIGERATION - PERFORMANCE TESTING AND TEST METHODS - PART 2: CONDENSING UNITS |
DIN EN 14236:2008-06 | ULTRASONIC DOMESTIC GAS METERS |
BS EN 29104:1993 | Measurement of fluid flow in closed conduits. Methods of evaluating the performance of electromagnetic flow-meters for liquids |
BS EN 1093-6 : 1999 | SAFETY OF MACHINERY - EVALUATION OF THE EMISSION OF AIRBORNE HAZARDOUS SUBSTANCES - PART 6: SEPARATION EFFICIENCY BY MASS, UNDUCTED OUTLET |
I.S. EN 1093-6:1999 | SAFETY OF MACHINERY - EVALUATION OF THE EMISSION OF AIRBORNE HAZARDOUS SUBSTANCES - PART 6: SEPARATION EFFICIENCY BY MASS, UNDUCTED OUTLET |
I.S. EN ISO 9300:2005 | MEASUREMENT OF GAS FLOW BY MEANS OF CRITICAL FLOW VENTURI NOZZLES |
DIN EN 1776:2016-05 | GAS INFRASTRUCTURE - GAS MEASURING SYSTEMS - FUNCTIONAL REQUIREMENTS |
DIN EN 13053:2012-02 | VENTILATION FOR BUILDINGS - AIR HANDLING UNITS - RATING AND PERFORMANCE FOR UNITS, COMPONENTS AND SECTIONS (INCLUDES AMENDMENT A1:2011) |
I.S. EN 1359:2017 | GAS METERS - DIAPHRAGM GAS METERS |
DIN EN 12405:2003-10 | GAS METERS - GAS-VOLUME ELECTRONIC CONVERSION DEVICES |
I.S. EN 13771-2:2017 | COMPRESSORS AND CONDENSING UNITS FOR REFRIGERATION - PERFORMANCE TESTING AND TEST METHODS - PART 2: CONDENSING UNITS |
I.S. EN ISO 748:2007 | HYDROMETRY - MEASUREMENT OF LIQUID FLOW IN OPEN CHANNELS USING CURRENT-METERS OR FLOATS |
I.S. EN 13771-1:2016 | COMPRESSORS AND CONDENSING UNITS FOR REFRIGERATION PERFORMANCE TESTING AND TEST METHODS - PART 1: REFRIGERANT COMPRESSORS |
I.S. EN 1093-7:1999 | SAFETY OF MACHINERY - EVALUATION OF THE EMISSION OF AIRBORNE HAZARDOUS SUBSTANCES - PART 7: SEPARATION EFFICIENCY BY MASS, DUCTED OUTLET |
I.S. EN 1776:2015 | GAS INFRASTRUCTURE - GAS MEASURING SYSTEMS - FUNCTIONAL REQUIREMENTS |
BS 848-1:1997 | Fans for general purposes Performance testing using standardized airways |
ASME MFC 3M : 2004 | MEASUREMENT OF FLUID FLOW IN PIPES USING ORIFICE, NOZZLE, AND VENTURI |
VDI/VDE 2040 Blatt 5:1989-03 | Calculation principles for the measurement of fluid flow using orifice plates, nozzles and venturi tubes; uncertainties |
BS 848-1(2007) : 2007 COR 2010 | INDUSTRIAL FANS - PERFORMANCE TESTING USING STANDARDIZED AIRWAYS |
BS 848-9:2007 | Fans for general purposes. Tolerances, methods of conversion and technical data presentation |
VDI/VDE 2040 Blatt 2:1987-04 | Calculation principles for measurement of fluid flow using orifice plates, nozzles and venturi tubes; equations and formulae |
ISO 1100-2:2010 | Hydrometry Measurement of liquid flow in open channels Part 2: Determination of the stage-discharge relationship |
BS 848-9:2006 | Fans for general purposes Tolerances, methods of conversion and technical data presentation |
BS 1042-1.3(1991) : 1991 AMD 8878 | MEASUREMENT OF FLUID FLOW IN CLOSED CIRCUITS - PRESSURE DIFFERENTIAL DEVICES - METHOD OF MEASUREMENT OF GAS FLOW BY MEANS OF CRITICAL FLOW VENTURI NOZZLES |
API MPM CH14.3.1 : 2012:R2017 | ORIFICE METERING OF NATURAL GAS AND OTHER RELATED HYDROCARBON FLUIDS - CONCENTRIC, SQUARE-EDGED ORIFICE METERS - PART 1: GENERAL EQUATIONS AND UNCERTAINTY GUIDELINES |
API TR 1149 : 2015 | PIPELINE VARIABLE UNCERTAINTIES AND THEIR EFFECTS ON LEAK DETECTABILITY |
ISO 10790:2015 | Measurement of fluid flow in closed conduits Guidance to the selection, installation and use of Coriolis flowmeters (mass flow, density and volume flow measurements) |
14/30304116 DC : 0 | BS EN 1359 - GAS METERS - DIAPHRAGM GAS METERS |
BS ISO 8178-1:2017 | Reciprocating internal combustion engines. Exhaust emission measurement Test-bed measurement systems of gaseous and particulate emissions |
UNE-EN 62006:2011 | Hydraulic machines - Acceptance tests of small hydroelectric installations |
11/30215951 DC : 0 | BS ISO 17089-2 - MEASUREMENT OF FLUID FLOW IN CLOSED CONDUITS - ULTRASONIC METERS FOR GAS - PART 2: METERS FOR INDUSTRIAL APPLICATIONS |
BS ISO 2714:2017 | Liquid hydrocarbons. Volumetric measurement by displacement meter Volumetric measurement by displacement meter systems other than dispensing pumps |
CGSB-157.2 : M91 | LIQUID FLOW MEASUREMENT IN OPEN CHANNELS - VELOCITY AREA METHODS |
BS ISO 6421:2012 | Hydrometry. Methods for assessment of reservoir sedimentation |
07/30113186 DC : 0 | BS ISO 8178-2 - RECIPROCATING INTERNAL COMBUSTION ENGINES - EXHAUST EMISSION MEASUREMENT - PART 2: MEASUREMENT OF GASEOUS AND PARTICULATE EXHAUST EMISSIONS UNDER FIELD CONDITIONS |
BS 3680-3C:1983 | Measurement of liquid flow in open channels. Stream flow measurement Methods for determination of the stage-discharge relation |
BS 1339-3:2004 | Humidity Guide to the measurement of humidity |
BS 5792-1(1993) : 1993 AMD 9333 | MEASUREMENT OF CONDUCTIVE LIQUID FLOW IN CLOSED CONDUITS - METHOD USING ELECTROMAGNETIC FLOWMETERS |
BS ISO 1088:2007 | Hydrometry. Velocity-area methods using current-meters. Collection and processing of data for determination of uncertainties in flow measurement |
17/30352625 DC : DRAFT SEP 2017 | BS IEC 62282-8-101 ED1.0 - FUEL CELL TECHNOLOGIES - PART 8-101: ENERGY STORAGE SYSTEMS USING FUEL CELL MODULES IN REVERSE MODE - TEST PROCEDURES FOR SOLID OXIDE SINGLE CELL AND STACK PERFORMANCE INCLUDING REVERSING OPERATION |
BS ISO 12764:2017 | Measurement of fluid flow in closed conduits. Flowrate measurement by means of vortex shedding flowmeters inserted in circular cross-section conduits running full |
BS ISO 4360:2008 | Hydrometry. Open channel flow measurement using triangular profile weirs |
BS ISO TR 12764:1997 | Measurement of fluid flow in closed conduits. Flowrate measurement by means of vortex shedding flowmeters inserted in circular cross-section conduits running full |
02/706744 DC : DRAFT MAY 2002 | ISO/DIS 8178-1 - RECIPROCATING INTERNAL COMBUSTION ENGINES - EXHAUST EMISSION MEASUREMENT - PART 1: TEST-BED MEASUREMENT OF GASEOUS AND PARTICULATE EXHAUST EMISSIONS |
05/30134787 DC : DRAFT JUNE 2005 | ISO 1088 - HYDROMETRY - VELOCITY-AREA METHODS - COLLECTION AND PROCESSING OF DATA FOR DETERMINATION OF UNCERTAINTIES IN FLOW MEASUREMENT |
BS ISO 7194:2008 | Measurement of fluid flow in closed conduits. Velocity-area methods of flow measurement in swirling or asymmetric flow conditions in circular ducts by means of current-meters or Pitot statics tubes |
API TR 2571 : 2011 | FUEL GAS MEASUREMENT |
ISO 12764:2017 | Measurement of fluid flow in closed conduits — Flowrate measurement by means of vortex shedding flowmeters inserted in circular cross-section conduits running full |
ISO 2714:2017 | Liquid hydrocarbons — Volumetric measurement by displacement meter |
CEI EN 60193 : 2000 | HYDRAULIC TURBINES, STORAGE PUMPS AND PUMP-TURBINES MODEL ACCEPTANCE TESTS |
ISO 9213:2004 | Measurement of total discharge in open channels Electromagnetic method using a full-channel-width coil |
ISO 8178-4:2017 | Reciprocating internal combustion engines Exhaust emission measurement Part 4: Steady-state and transient test cycles for different engine applications |
BS ISO 1217 : 2009 | DISPLACEMENT COMPRESSORS - ACCEPTANCE TESTS |
I.S. EN 12405-3:2015 | GAS METERS - CONVERSION DEVICES - PART 3: FLOW COMPUTER |
API MPM CH14.3.1:2012 | ORIFICE METERING OF NATURAL GAS AND OTHER RELATED HYDROCARBON FLUIDS - CONCENTRIC, SQUARE-EDGED ORIFICE METERS - PART 1: GENERAL EQUATIONS AND UNCERTAINTY GUIDELINES |
ISO 3354:2008 | Measurement of clean water flow in closed conduits — Velocity-area method using current-meters in full conduits and under regular flow conditions |
I.S. EN 14236:2007 | ULTRASONIC DOMESTIC GAS METERS |
ISO 7194:2008 | Measurement of fluid flow in closed conduits — Velocity-area methods of flow measurement in swirling or asymmetric flow conditions in circular ducts by means of current-meters or Pitot static tubes |
BS EN 60193:1999 | Hydraulic turbines, storage pumps and pump-turbines. Model acceptance tests |
EN 60193:1999 | Hydraulic turbines, storage pumps and pump-turbines - Model acceptance tests |
CEI EN 60041 : 1997 | FIELD ACCEPTANCE TESTS TO DETERMINE THE HYDRAULIC PERFORMANCE OF HYDRAULIC TURBINES, STORAGE PUMPS AND PUMP-TURBINES |
UNE-EN ISO 5167-5:2016 | Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full - Part 5: Cone meters (ISO 5167-5:2016) |
EN 62006:2011 | Hydraulic machines - Acceptance tests of small hydroelectric installations |
PREN 1359 : DRAFT 2014 | GAS METERS - DIAPHRAGM GAS METERS |
EN 12405-1:2005+A2:2010 | Gas meters - Conversion devices - Part 1: Volume conversion |
ISO 17089-1:2010 | Measurement of fluid flow in closed conduits - Ultrasonic meters for gas Part 1: Meters for custody transfer and allocation measurement |
API 551 : 2016 | PROCESS MEASUREMENT |
I.S. EN 12261:2002 | GAS METERS - TURBINE GAS METERS |
DIN EN ISO 6817:1995-11 | MEASUREMENT OF CONDUCTIVE LIQUID FLOW IN CLOSED CONDUITS; METHODS USING ELECTROMAGNETIC FLOW-METERS |
DIN EN 1093-6:2008-11 | SAFETY OF MACHINERY - EVALUATION OF THE EMISSION OF AIRBORNE HAZARDOUS SUBSTANCES - PART 6: SEPARATION EFFICIENCY BY MASS, UNDUCTED OUTLET |
DIN EN 1093-7:2008-11 | SAFETY OF MACHINERY - EVALUATION OF THE EMISSION OF AIRBORNE HAZARDOUS SUBSTANCES - PART 7: SEPARATION EFFICIENCY BY MASS, DUCTED OUTLET |
BS EN 13053 : 2006 | VENTILATION FOR BUILDINGS - AIR HANDLING UNITS - RATING AND PERFORMANCE FOR UNITS, COMPONENTS AND SECTIONS |
ISO 8178-1:2020 | Reciprocating internal combustion engines — Exhaust emission measurement — Part 1: Test-bed measurement systems of gaseous and particulate emissions |
EN ISO 15112:2014 | NATURAL GAS - ENERGY DETERMINATION (ISO 15112:2011) |
I.S. EN ISO 6817:1996 | MEASUREMENT OF CONDUCTIVE LIQUID FLOW IN CLOSED CIRCUITS - METHODS USING ELECTROMAGNETIC FLOWMETERS |
UNI EN 1093-6 : 2008 | SAFETY OF MACHINERY - EVALUATION OF THE EMISSION OF AIRBORNE HAZARDOUS SUBSTANCES - PART 6: SEPARATION EFFICIENCY BY MASS, UNDUCTED OUTLET |
UNI EN 1093-7 : 2008 | SAFETY OF MACHINERY - EVALUATION OF THE EMISSION OF AIRBORNE HAZARDOUS SUBSTANCES - PART 7: SEPARATION EFFICIENCY BY MASS, DUCTED OUTLET |
14/30285986 DC : 0 | BS ISO 16956 - THERMAL PERFORMANCE IN THE BUILT ENVIRONMENT - DETERMINATION OF AIR FLOW RATE IN BUILDING APPLICATIONS BY FIELD MEASURING METHODS |
ISO 5801:2017 | Fans — Performance testing using standardized airways |
SAE AIR 4979 : 2012 | ESTIMATION OF MEASUREMENT UNCERTAINTY IN ENGINE TESTS BASED ON NATO AGARD UNIFORM ENGINE TEST PROGRAM |
BS EN ISO 15112:2014 | Natural gas. Energy determination |
ISO 2425:2010 | Hydrometry Measurement of liquid flow in open channels under tidal conditions |
12/30258979 DC : 0 | BS ISO 10790 - MEASUREMENT OF FLUID FLOW IN CLOSED CONDUITS - GUIDANCE TO THE SELECTION, INSTALLATION AND USE OF CORIOLIS METERS (MASS FLOW, DENSITY AND VOLUME FLOW MEASUREMENTS) |
BS ISO 3354:2008 | Measurement of clean water flow in closed conduits. Velocity-area method using current-meters in full conduits and under regular flow conditions |
PD CEN/TR 16787:2014 | Industrial Gas Installation. Guideline |
PREN 14236 : DRAFT 2017 | ULTRASONIC DOMESTIC GAS METERS |
PD ISO/TR 9464:2008 | Guidelines for the use of ISO 5167:2003 |
ISO 29042-5:2010 | Safety of machinery Evaluation of the emission of airborne hazardous substances Part 5: Test bench method for the measurement of the separation efficiency by mass of air cleaning systems with unducted outlet |
BS EN 12405-3:2015 | Gas meters. Conversion devices Flow computer |
BS 3195-2:1989 | Methods for sampling petroleum products Automatic pipeline sampling of liquid hydrocarbons |
11/30215954 DC : 0 | BS ISO 4359 - LIQUID FLOW MEASUREMENT IN OPEN CHANNELS - RECTANGULAR, TRAPEZOIDAL AND U-SHAPED FLUMES |
CEN/TR 12101-4:2009 | Smoke and heat control systems - Part 4: Installed SHEVS systems for smoke and heat ventilation |
BS 3680-3A:1980 | Measurement of liquid flow in open channels. Stream flow measurement Velocity-area methods |
BS ISO TR 7066-1:1997 | Assessment of uncertainty in calibration and use of flow measurement devices Linear calibration relationships |
ISO/TR 24578:2012 | Hydrometry Acoustic Doppler profiler Method and application for measurement of flow in open channels |
00/122905 DC : DRAFT JULY 2000 | BS 1339-3 - GUIDE TO THE MEASUREMENT OF HUMIDITY |
14/30284736 DC : 0 | BS EN ISO 5801 - FANS - PERFORMANCE TESTING USING STANDARDIZED AIRWAYS |
ISO 1217:2009 | Displacement compressors Acceptance tests |
BS EN ISO 5167-5:2016 | Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full Cone meters |
BS ISO 8178-4:2017 | Reciprocating internal combustion engines. Exhaust emission measurement Steady-state and transient test cycles for different engine applications |
UNE-EN ISO 15112:2014 | Natural gas - Energy determination (ISO 15112:2011) |
DIN EN 12405-3 E : 2016 | GAS METERS - CONVERSION DEVICES - PART 3: FLOW COMPUTER |
BS ISO 17089-1:2019 | Measurement of fluid flow in closed conduits. Ultrasonic meters for gas Meters for custody transfer and allocation measurement |
10/30216361 DC : 0 | BS ISO 29042-9 - SAFETY OF MACHINERY - EVALUATION OF THE EMISSION OF AIRBORNE HAZARDOUS SUBSTANCES - PART 9: DECONTAMINATION INDEX |
BS ISO 5801 : 2007 | INDUSTRIAL FANS - PERFORMANCE TESTING USING STANDARDIZED AIRWAYS |
DIN EN ISO 5167-5:2016-10 | Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full - Part 5: Cone meters (ISO 5167-5:2016) |
SAE AIR 1678 : 2016 | UNCERTAINTY OF IN-FLIGHT THRUST DETERMINATION |
CEI EN 62006 : 2011 | HYDRAULIC MACHINES - ACCEPTANCE TESTS OF SMALL HYDROELECTRIC INSTALLATIONS |
I.S. EN ISO 5167-5:2016 | MEASUREMENT OF FLUID FLOW BY MEANS OF PRESSURE DIFFERENTIAL DEVICES INSERTED IN CIRCULAR CROSS-SECTION CONDUITS RUNNING FULL - PART 5: CONE METERS (ISO 5167-5:2016) |
17/30339487 DC : 0 | BS EN 13053 - VENTILATION FOR BUILDINGS - AIR HANDLING UNITS - RATING AND PERFORMANCE FOR UNITS, COMPONENTS AND SECTIONS |
DIN EN 14236 E : 2008 | ULTRASONIC DOMESTIC GAS METERS |
ISO 20456:2017 | Measurement of fluid flow in closed conduits — Guidance for the use of electromagnetic flowmeters for conductive liquids |
AGA XQ1201 : 2012(R2017) | AGA REPORT NO. 3, ORIFICE METERING OF NATURAL GAS - PART 1: GENERAL EQUATIONS AND UNCERTAINTY GUIDELINES |
ISO/TR 9464:2008 | Guidelines for the use of ISO 5167:2003 |
ISO 15769:2010 | Hydrometry Guidelines for the application of acoustic velocity meters using the Doppler and echo correlation methods |
ISO 17089-2:2012 | Measurement of fluid flow in closed conduits - Ultrasonic meters for gas — Part 2: Meters for industrial applications |
ISO 4360:2008 | Hydrometry Open channel flow measurement using triangular profile weirs |
I.S. CEN TR 12101-4:2006 | SMOKE AND HEAT CONTROL SYSTEMS - PART 4: INSTALLED SHEVS SYSTEMS FOR SMOKE AND HEAT VENTILATION |
I.S. EN 62006:2011 | HYDRAULIC MACHINES - ACCEPTANCE TESTS OF SMALL HYDROELECTRIC INSTALLATIONS |
DIN EN ISO 748 E : 2008 | HYDROMETRY - MEASUREMENT OF LIQUID FLOW IN OPEN CHANNELS USING CURRENT-METERS OR FLOATS |
DIN EN 13771-1 E : 2017 | COMPRESSORS AND CONDENSING UNITS FOR REFRIGERATION - PERFORMANCE TESTING AND TEST METHODS - PART 1: REFRIGERANT COMPRESSORS |
DIN EN 1093-1:2009-02 | SAFETY OF MACHINERY - EVALUATION OF THE EMISSION OF AIRBORNE HAZARDOUS SUBSTANCES - PART 1: SELECTION OF TEST METHODS |
DIN EN 13771-2:2017-11 | COMPRESSORS AND CONDENSING UNITS FOR REFRIGERATION - PERFORMANCE TESTING AND TEST METHODS - PART 2: CONDENSING UNITS |
ISO 9300:2005 | Measurement of gas flow by means of critical flow Venturi nozzles |
BS EN ISO 8178-2:1997 | Reciprocating internal combustion engines. Exhaust emission measurement Measurement of gaseous and particulate exhaust emissions at site |
ISO 14111:1997 | Natural gas — Guidelines to traceability in analysis |
ISO 5198:1987 | Centrifugal, mixed flow and axial pumps Code for hydraulic performance tests Precision grade |
UNE-EN 1776:2017 | Gas infrastructure - Gas measuring systems - Functional requirements |
BS EN 14236:2007 | Ultrasonic domestic gas meters |
BS EN 1776:2015 | Gas infrastructure. Gas measuring systems. Functional requirements |
BS EN ISO 5198:1999 | Centrifugal, mixed flow and axial pumps. Code for hydraulic performance tests. Precision class |
UNI EN 13053 : 2011 | VENTILATION FOR BUILDINGS - AIR HANDLING UNITS - RATING AND PERFORMANCE FOR UNITS, COMPONENTS AND SECTIONS |
BS EN ISO 3171:1999 | Methods of test for petroleum and its products. BS 2000-476: Petroleum liquids. Automatic pipeline sampling |
UNE-EN 13771-1:2017 | Compressors and condensing units for refrigeration - Performance testing and test methods - Part 1: Refrigerant compressors |
DIN EN ISO 9300:2005-11 | Measurement of gas flow by means of critical flow Venturi nozzles (ISO 9300:2005) |
ISO 3171:1988 | Petroleum liquids — Automatic pipeline sampling |
ISO 5167-5:2016 | Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full — Part 5: Cone meters |
BS EN 1093-7 : 1999 | SAFETY OF MACHINERY - EVALUATION OF THE EMISSION OF AIRBORNE HAZARDOUS SUBSTANCES - PART 7: SEPARATION EFFICIENCY BY MASS, DUCTED OUTLET |
BS EN 12405:2002 | Gas meters. Gas-volume electronic conversion devices |
BS EN ISO 8178-1:1996 | Reciprocating internal combustion engines. Exhaust emission measurement Test-bed measurement of gaseous and particulate exhaust emissions |
ISO 8316:1987 | Measurement of liquid flow in closed conduits Method by collection of the liquid in a volumetric tank |
ISO 748:2007 | Hydrometry Measurement of liquid flow in open channels using current-meters or floats |
EN 24006:1993 | Measurement of fluid flow in closed conduits - Vocabulary and symbols (ISO 4006:1991) |
EN ISO 6817:1995 | Measurement of conductive liquid flow in closed conduits - Methods using electromagnetic flow-meters (ISO 6817:1992) |
EN ISO 5198:1998 | CENTRIFUGAL, MIXED FLOW AND AXIAL PUMPS - CODE FOR HYDRAULIC PERFORMANCE TESTS - PRECISION CLASS |
EN ISO 5167-5:2016 | Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full - Part 5: Cone meters (ISO 5167-5:2016) |
EN ISO 14111:1999 | Natural gas - Guidelines to traceability in analysis (ISO 14111:1997) |
EN 1776:2015 | Gas infrastructure - Gas measuring systems - Functional requirements |
EN ISO 3171:1999 | Petroleum liquids - Automatic pipeline sampling (ISO 3171:1988) |
EN 1359:2017 | Gas meters - Diaphragm gas meters |
EN 13771-1:2016 | Compressors and condensing units for refrigeration - Performance testing and test methods - Part 1: Refrigerant compressors |
EN ISO 9300:2005 (edition 2) | Measurement of gas flow by means of critical flow Venturi nozzles (ISO 9300:2005) |
EN ISO 8316:1995 | Measurement of liquid flow in closed conduits - Method by collection of the liquid in a volumetric tank (ISO 8316:1987) |
EN 13771-2:2017 | Compressors and condensing units for refrigeration - Performance testing and test methods - Part 2: Condensing units |
EN 24185:1993/AC:1993 | MEASUREMENT OF LIQUID FLOW IN CLOSED CONDUITS - WEIGHING METHOD |
EN 27842:1991 | Automatic steam traps - Determination of discharge capacity - Test methods (ISO 7842:1988) |
EN 29104 : 1993 | MEASUREMENT OF FLUID FLOW IN CLOSED CONDUITS - METHODS OF EVALUATING THE PERFORMANCE OF ELECTROMAGNETIC FLOW-METERS FOR LIQUIDS |
09/30169001 DC : 0 | BS ISO 2425 - HYDROMETRY - MEASUREMENT OF LIQUID FLOW IN OPEN CHANNELS UNDER TIDAL CONDITIONS |
ASHRAE 51 : 2016 | LABORATORY METHODS OF TESTING FANS FOR CERTIFIED AERODYNAMIC PERFORMANCE RATING |
BS ISO 12242:2012 | Measurement of fluid flow in closed conduits. Ultrasonic transit-time meters for liquid |
CGSB-157.4 : M91 | LIQUID FLOW MEASUREMENT IN OPEN CHANNELS - DETERMINATION OF STAGE-DISCHARGE RELATION |
13/30277457 DC : 0 | BS EN 1776 - GAS INFRASTRUCTURE - GAS MEASURING SYSTEMS - FUNCTIONAL REQUIREMENTS |
BS EN 62006:2011 | Hydraulic machines. Acceptance tests of small hydroelectric installations |
BS ISO 15769:2010 | Hydrometry. Guidelines for the application of acoustic velocity meters using the Doppler and echo correlation methods |
PD ISO/TR 24578:2012 | Hydrometry. Acoustic Doppler profiler. Method and application for measurement of flow in open channels |
17/30331584 DC : 0 | BS ISO 2715 - LIQUID HYDROCARBONS - VOLUMETRIC MEASUREMENT BY TURBINE FLOWMETER |
16/30334062 DC : 0 | BS ISO 8178-1 - RECIPROCATING INTERNAL COMBUSTION ENGINES - EXHAUST EMISSION MEASUREMENT - PART 1: TEST-BED MEASUREMENT SYSTEMS OF GASEOUS AND PARTICULATE EMISSIONS |
17/30356728 DC : 0 | BS EN 12261 - GAS METERS - TURBINE GAS METERS |
17/30331581 DC : 0 | BS ISO 2714 - LIQUID HYDROCARBONS - VOLUMETRIC MEASUREMENT BY DISPLACEMENT METER |
PREN 12261 : DRAFT 2017 | GAS METERS - TURBINE GAS METERS |
BS 3156-11.0.3(1997) : 1997 AMD 10655 | ANALYSIS OF FUEL GASES - METHODS FOR NON-MANUFACTURED GASES - GENERAL - GUIDELINES TO TRACEABILITY IN ANALYSIS OF NATURAL GAS |
ISO/TR 12764:1997 | Measurement of fluid flow in closed conduits Flowrate measurement by means of vortex shedding flowmeters inserted in circular cross-section conduits running full |
09/30190932 DC : 0 | BS ISO 29042-6 - SAFETY OF MACHINERY - EVALUATION OF THE EMISSION OF AIRBORNE HAZARDOUS SUBSTANCES - PART 6: TEST BENCH METHOD FOR THE MEASUREMENT OF THE SEPARATION EFFICIENCY BY MASS OF AIR CLEANING SYSTEMS WITH DUCTED OUTLET |
BS ISO 9213:2004 | Measurement of total discharge in open channels. Electromagnetic method using a full-channel-width coil |
ISO/TR 26762:2008 | Natural gas — Upstream area — Allocation of gas and condensate |
UNI EN ISO 15112 : 2014 | NATURAL GAS - ENERGY DETERMINATION |
PREN 13771-2 : DRAFT 2016 | COMPRESSORS AND CONDENSING UNITS FOR REFRIGERATION - PERFORMANCE TESTING AND TEST METHODS - PART 2: CONDENSING UNITS |
ISO 19970:2017 | Refrigerated hydrocarbon and non-petroleum based liquefied gaseous fuels — Metering of gas as fuel on LNG carriers during cargo transfer operations |
17/30356731 DC : 0 | BS EN 12405-1 - GAS METERS - CONVERSION DEVICES - PART 1: VOLUME CONVERSION |
ISO 15112:2011 | Natural gas Energy determination |
ISO 8178-2:2008 | Reciprocating internal combustion engines Exhaust emission measurement Part 2: Measurement of gaseous and particulate exhaust emissions under field conditions |
EN 13053:2006+A1:2011 | Ventilation for buildings - Air handling units - Rating and performance for units, components and sections |
ISO 14511:2001 | Measurement of fluid flow in closed conduits Thermal mass flowmeters |
ISO 9123:2017 | Hydrometry — Stage-fall-discharge relationships |
I.S. CEN ISO/TS 25377:2007 | HYDROMETRIC UNCERTAINTY GUIDANCE (HUG) |
I.S. EN ISO 6416:2017 | HYDROMETRY - MEASUREMENT OF DISCHARGE BY THE ULTRASONIC TRANSIT TIME (TIME OF FLIGHT) METHOD (ISO 6416:2017) |
ISO 6817:1992 | Measurement of conductive liquid flow in closed conduits Method using electromagnetic flowmeters |
BS EN ISO 8178-4:1996 | Reciprocating internal combustion engines. Exhaust emission measurement Test cycles for different engine applications |
BS EN ISO 9300:2005 | Measurement of gas flow by means of critical flow Venturi nozzles |
UNE-EN 13053:2007 | Ventilation for buildings - Air handling units - Rating and performance for units, components and sections |
BS EN 13771-1:2016 | Compressors and condensing units for refrigeration. Performance testing and test methods Refrigerant compressors |
BS EN 1359:2017 | Gas meters. Diaphragm gas meters |
BS EN 13771-2:2017 | Compressors and condensing units for refrigeration. Performance testing and test methods Condensing units |
DIN EN 13771-1:2017-04 | COMPRESSORS AND CONDENSING UNITS FOR REFRIGERATION - PERFORMANCE TESTING AND TEST METHODS - PART 1: REFRIGERANT COMPRESSORS |
EN 12405-3 : 2015 | GAS METERS - CONVERSION DEVICES - PART 3: FLOW COMPUTER |
EN 1093-7:1998+A1:2008 | Safety of machinery - Evaluation of the emission of airborne hazardous substances - Part 7: Separation efficiency by mass, ducted outlet |
EN ISO 748:2007 | Hydrometry - Measurement of liquid flow in open channels using current-meters or floats (ISO 748:2007) |
ASME MFC 12M : 2006 : R2014 | MEASUREMENT OF FLUID FLOW IN CLOSED CONDUITS USING MULTIPORT AVERAGING PITOT PRIMARY ELEMENTS |
ASME MFC 12M : 2006 | MEASUREMENT OF FLUID FLOW IN CLOSED CONDUITS USING MULTIPORT AVERAGING PITOT PRIMARY ELEMENTS |
ASME PTC11 : 2008(R2018) | FANS |
BS 5875(1991) : 91 AMD 7978 | GLOSSARY OF TERMS AND SYMBOLS FOR MEASUREMENT OF FLUID FLOW IN CLOSED CONDUITS |
ASME MFC 16 : 2014 | MEASUREMENT OF LIQUID FLOW IN CLOSED CONDUITS WITH ELECTROMAGNETIC FLOWMETERS |
ISO 748:2007 | Hydrometry Measurement of liquid flow in open channels using current-meters or floats |
ISO 7066-2:1988 | Assessment of uncertainty in the calibration and use of flow measurement devices — Part 2: Non-linear calibration relationships |
ISO 9300:2005 | Measurement of gas flow by means of critical flow Venturi nozzles |
ISO 5167-2:2003 | Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full Part 2: Orifice plates |
ISO 5167-1:2003 | Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full Part 1: General principles and requirements |
ISO/TR 7066-1:1997 | Assessment of uncertainty in calibration and use of flow measurement devices — Part 1: Linear calibration relationships |
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.