Customer Support: 131 242

  • There are no items in your cart
We noticed you’re not on the correct regional site. Switch to our AMERICAS site for the best experience.
Dismiss alert

ISO 643:2012

Withdrawn
Withdrawn

A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.

View Superseded by
withdrawn

A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.

Steels Micrographic determination of the apparent grain size
Available format(s)

Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users

Withdrawn date

13-12-2019

Language(s)

English, French

Published date

10-12-2012

ISO 643:2012 specifies a micrographic method of determining apparent ferritic or austenitic grain size in steels. It describes the methods of revealing grain boundaries and of estimating the mean grain size of specimens with unimodal size distribution. Although grains are three-dimensional in shape, the metallographic sectioning plane can cut through a grain at any point from a grain corner, to the maximum diameter of the grain, thus producing a range of apparent grain sizes on the two-dimensional plane, even in a sample with a perfectly consistent grain size.

DevelopmentNote
DRAFT ISO/DIS 643 is also available for this standard. (06/2017)
DocumentType
Standard
Pages
35
PublisherName
International Organization for Standardization
Status
Withdrawn
SupersededBy
Supersedes

11/30239491 DC : 0 BS EN 10149-1 - HOT ROLLED FLAT PRODUCTS MADE OF HIGH YIELD STRENGTH STEELS FOR COLD FORMING - PART 1: GENERAL DELIVERY CONDITIONS
ISO 3076:2012 Round steel short link chains for general lifting purposes — Medium tolerance sling chains for chain slings — Grade 8
I.S. EN 10083-1:2006 STEELS FOR QUENCHING AND TEMPERING - PART 1: GENERAL TECHNICAL DELIVERY CONDITIONS
BS ISO 5832-1:2007 Implants for surgery. Metallic materials Wrought stainless steel
DIN EN 10210-1:2016-01 (Draft) Hot finished structural steel hollow sections - Part 1: General; German and English version prEN 10210-1:2016
11/30239476 DC : 0 BS EN 10025-2 - HOT ROLLED PRODUCTS OF STRUCTURAL STEELS - PART 2: TECHNICAL DELIVERY CONDITIONS FOR NON-ALLOY STRUCTURAL STEELS
BS ISO 16877:2015 Round steel short link chains for lifting purposes. Fine tolerance hoist chains for hand operated chain hoists. Grade TH
BS 7252-12:1997 Metallic materials for surgical implants Specification for wrought cobalt-chromium-molybdenum alloy
13/30290101 DC : 0 BS EN 4700-2 - AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 002: BAR AND SECTION
PREN 1442 : DRAFT 2014 LPG EQUIPMENT AND ACCESSORIES - TRANSPORTABLE REFILLABLE WELDED STEEL CYLINDERS FOR LPG - DESIGN AND CONSTRUCTION
DIN ISO 5832-5:2008-04 Implants for surgery - Metallic materials - Part 5: Wrought cobalt-chromium-tungsten-nickel alloy (ISO 5832-5:2005)
11/30239479 DC : 0 BS EN 10025-3 - HOT ROLLED PRODUCTS OF STRUCTURAL STEELS - PART 3: TECHNICAL DELIVERY CONDITIONS FOR NORMALIZED/NORMALIZED ROLLED WELDABLE FINE GRAIN STRUCTURAL STEELS
11/30239494 DC : 0 BS EN 10149-2 - HOT ROLLED FLAT PRODUCTS MADE OF HIGH YIELD STRENGTH STEELS FOR COLD FORMING - PART 2: DELIVERY CONDITIONS FOR THERMOMECHANICALLY ROLLED STEELS
15/30269176 DC : 0 BS ISO 6336-5 - CALCULATION OF LOAD CAPACITY OF SPUR AND HELICAL GEARS - PART 5: STRENGTH AND QUALITY OF MATERIALS
15/30310217 DC : 0 BS ISO 5832-1 - IMPLANTS FOR SURGERY - METALLIC MATERIALS - PART 1: WROUGHT STAINLESS STEEL
04/30110594 DC : DRAFT MARCH 2004 ISO 12732 - CORROSION OF METALS AND ALLOYS - METHOD FOR ELECTROCHEMICAL POTENTIOKINETIC REACTIVATION MEASUREMENT USING THE DOUBLE LOOP METHOD (BASED ON CIHAL'S METHOD)
06/30159843 DC : 0 BS ISO 13680 - PETROLEUM AND NATURAL GAS INDUSTRIES - CORROSION - RESISTANT ALLOY SEAMLESS TUBES FOR USE AS CASING, TUBING AND COUPLING STOCK - TECHNICAL DELIVERY CONDITIONS
17/30346753 DC : 0 BS ISO 9328-3 - STEEL FLAT PRODUCTS FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 3: WELDABLE FINE GRAIN STEELS, NORMALIZED
DIN EN 10149-1:2013-12 HOT ROLLED FLAT PRODUCTS MADE OF HIGH YIELD STRENGTH STEELS FOR COLD FORMING - PART 1: GENERAL TECHNICAL DELIVERY CONDITIONS
13/30247437 DC : 0 BS EN ISO 683-17 - HEAT-TREATED STEELS, ALLOY STEELS AND FREE-CUTTING STEELS - PART 17: BALL AND ROLLER BEARING STEELS (ISO/DIS 683-17:2013)
ISO 14250:2000 Steel — Metallographic characterization of duplex grain size and distributions
13/30279057 DC : 0 BS ISO 683-4 - HEAT-TREATABLE STEELS, ALLOY STEELS AND FREE-CUTTING STEELS - PART 4: FREE-CUTTING STEELS
ISO 683-3:2016 Heat-treatable steels, alloy steels and free-cutting steels Part 3: Case-hardening steels
02/711556 DC : 0 LINKS FOR USE WITH STEEL CHAINS OF GRADE 8
BS EN 4500-003:2012 Aerospace series. Metallic materials. Rules for drafting and presentation of material standards Specific rules for heat resisting alloys
11/30191086 DC : 0 BS ISO 12633-1 - HOT-FINISHED STRUCTURAL HOLLOW SECTIONS OF NON-ALLOY AND FINE GRAIN STEELS - PART 1: TECHNICAL DELIVERY CONDITIONS
BS EN 4631:2013 Aerospace series. Steel X4CrNiMo16-5-1 (1.4418). Air melted. Hardened and tempered. Bar. De ≤ 200 mm. 900 MPa ≤ Rm ≤ 1 050 MPa
12/30258615 DC : 0 BS ISO 10384 - HOT-ROLLED CARBON STEEL SHEET AS DEFINED BY CHEMICAL COMPOSITION
BS EN 10343:2009 Steels for quenching and tempering for construction purposes. Technical delivery conditions
BS 7252-1:1990 Metallic materials for surgical implants Specification for wrought stainless steel
13/30256266 DC : 0 BS ISO 683-18 - HEAT-TREATABLE STEELS, ALLOY STEELS AND FREE-CUTTING STEELS - PART 18: BRIGHT STEEL PRODUCTS
BS ISO 5832-7:2016 Implants for surgery. Metallic materials Forgeable and cold-formed cobalt-chromium-nickel-molybdenum-iron alloy
04/30124490 DC : DRAFT OCT 2004 EN 15049 - RAILWAY APPLICATIONS - SUSPENSION COMPONENTS - TORSION BAR, STEEL
BS EN ISO 3266 : 2010 FORGED STEEL EYEBOLTS GRADE 4 FOR GENERAL LIFTING PURPOSES (ISO 3266:2010+A1:2015)
UNI EN 4800-006 : 2011 AEROSPACE SERIES - TITANIUM AND TITANIUM ALLOYS - TECHNICAL SPECIFICATION - PART 006: PRE-PRODUCTION AND PRODUCTION FORGINGS
08/30190263 DC : DRAFT SEP 2008 BS EN ISO 11960 - PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL PIPES FOR USE AS CASING OR TUBING FOR WELLS
ISO 3077:2001 Short-link chain for lifting purposes — Grade T, (types T, DAT and DT), fine-tolerance hoist chain
DIN EN ISO 945-1:2016-09 (Draft) MICROSTRUCTURE OF CAST IRONS - PART 1: GRAPHITE CLASSIFICATION BY VISUAL ANALYSIS
BS EN 10083-3 : 2006-08 STEELS FOR QUENCHING AND TEMPERING - PART 3: TECHNICAL DELIVERY CONDITIONS FOR ALLOY STEELS
PREN 4721 : DRAFT 2012 AEROSPACE SERIES - STEEL X4CRNIMO16-5-1 (1.4418) - AIR MELTED AND ELECTROSLAG REMELTED (ESR) - HARDENED AND TEMPERED - BAR - D[E] <=200 MM - 900 MPA <= R[M] <= 1050 MPA
UNI EN 4500-003 : 2014 AEROSPACE SERIES - METALLIC MATERIALS - RULES FOR DRAFTING AND PRESENTATION OF MATERIAL STANDARDS - PART 003: SPECIFIC RULES FOR HEAT RESISTING ALLOYS
BIS IS/ISO 5832-9 : 2007 IMPLANTS FOR SURGERY - METALLIC MATERIALS - PART 9: WROUGHT HIGH NITROGEN STAINLESS STEEL
ISO 22991:2004 Gas cylinders — Transportable refillable welded steel cylinders for liquefied petroleum gas (LPG) — Design and construction
PREN 4500-004 : 200P2 AEROSPACE SERIES - METALLIC MATERIALS - RULES FOR DRAFTING AND PRESENTATION OF MATERIAL STANDARDS - PART 004: SPECIFIC RULES FOR TITANIUM AND TITANIUM ALLOYS
PREN 14140 : DRAFT 2012 LPG EQUIPMENT AND ACCESSORIES - TRANSPORTABLE REFILLABLE WELDED STEEL CYLINDERS FOR LPG - ALTERNATIVE DESIGN AND CONSTRUCTION
PREN 10025-5 : DRAFT 2011 HOT ROLLED PRODUCTS OF STRUCTURAL STEELS - PART 5: TECHNICAL DELIVERY CONDITIONS FOR STRUCTURAL STEELS WITH IMPROVED ATMOSPHERIC CORROSION RESISTANCE
BS EN 14917 : 2009 METAL BELLOWS EXPANSION JOINTS FOR PRESSURE APPLICATIONS
ISO 9328-7:2018 Steel flat products for pressure purposes — Technical delivery conditions — Part 7: Stainless steels
BS EN 12807:2009 LPG equipment and accessories. Transportable refillable brazed steel cylinders for liquefied petroleum gas (LPG). Design and construction
EN 14917:2009+A1:2012 Metal bellows expansion joints for pressure applications
NF EN ISO 3266 : 2010 AMD 1 2016 FORGED STEEL EYEBOLTS GRADE 4 FOR GENERAL LIFTING PURPOSES
UNI EN ISO 11960 : 2014 PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL PIPES FOR USE AS CASING OR TUBING FOR WELLS
ISO 5832-14:2007 Implants for surgery Metallic materials Part 14: Wrought titanium 15-molybdenum 5-zirconium 3-aluminium alloy
ISO 12633-1:2011 Hot-finished structural hollow sections of non-alloy and fine grain steels — Part 1: Technical delivery conditions
ISO 4885:2018 Ferrous materials — Heat treatments — Vocabulary
EN 10028-3:2017 Flat products made of steels for pressure purposes - Part 3: Weldable fine grain steels, normalized
DIN EN 13261:2011-01 RAILWAY APPLICATIONS - WHEELSETS AND BOGIES - AXLES - PRODUCT REQUIREMENTS
BS EN 10025-5:2004 Hot rolled products of structual steels Technical delivery conditons for structural steels with improved atmospheric corrosion resistance
BS EN 10025-2:2004 Hot rolled products of structural steels Technical delivery conditions for non-alloy structural steels
BS EN 818-3 : 1999 SHORT LINK CHAIN FOR LIFTING PURPOSES - SAFETY - PART 3: MEDIUM TOLERANCE CHAIN FOR CHAIN SLINGS - GRADE 4
BS EN ISO 11960:2014 Petroleum and natural gas industries. Steel pipes for use as casing or tubing for wells
BS EN 13261 : 2009 RAILWAY APPLICATIONS - WHEELSETS AND BOGIES - AXLES - PRODUCT REQUIREMENTS
BS EN 10025-3:2004 Hot rolled products of structural steels Technical delivery conditions for normalized/normalized rolled weldable fine grain structural steels
I.S. EN 10084:2008 CASE HARDENING STEELS - TECHNICAL DELIVERY CONDITIONS
I.S. EN 10218-1:2012 STEEL WIRE AND WIRE PRODUCTS - GENERAL - PART 1: TEST METHODS
EN 10149-1:2013 Hot rolled flat products made of high yield strength steels for cold forming - Part 1: General technical delivery conditions
DIN EN 10025-5:2005-02 HOT ROLLED PRODUCTS OF STRUCTURAL STEELS - PART 5: TECHNICAL DELIVERY CONDITIONS FOR STRUCTURAL STEELS WITH IMPROVED ATMOSPHERIC CORROSION RESISTANCE
EN 10277-1:2008 Bright steel products - Technical delivery conditions - Part 1: General
EN 10263-1:2017 Steel rod, bars and wire for cold heading and cold extrusion - Part 1: General technical delivery conditions
DIN EN 10218-1:2012-03 STEEL WIRE AND WIRE PRODUCTS - GENERAL - PART 1: TEST METHODS
EN 10219-1:2006 Cold formed welded structural hollow sections of non-alloy and fine grain steels - Part 1: Technical delivery conditions
EN 10210-1:2006 Hot finished structural hollow sections of non-alloy and fine grain steels - Part 1: Technical delivery conditions
DIN EN 14330:2004-02 Inland navigation vessels - Studless anchor chain - Round steel link chain; German version EN 14330:2003
EN 10025-1:2004 Hot rolled products of structural steels - Part 1: General technical delivery conditions
DIN EN 10025-4:2005-02 HOT ROLLED PRODUCTS OF STRUCTURAL STEELS - PART 4: TECHNICAL DELIVERY CONDITIONS FOR THERMOMECHANICAL ROLLED WELDABLE FINE GRAIN STRUCTURAL STEELS
ONORM EN 14917 : 2012 METAL BELLOWS EXPANSION JOINTS FOR PRESSURE APPLICATIONS
EN 10218-1:2012 Steel wire and wire products - General - Part 1: Test methods
EN 10083-2:2006 Steels for quenching and tempering - Part 2: Technical delivery conditions for non alloy steels
DIN EN 13889:2009-02 FORGED STEEL SHACKLES FOR GENERAL LIFTING PURPOSES - DEE SHACKLES AND BOW SHACKLES, GRADE 6 - SAFETY
ONORM EN 4627 : 2014 AEROSPACE SERIES - STEEL X4CRNIMO16-5-1 (1.4418) - AIR MELTED - HARDENED AND TEMPERED - FORGINGS - D[E] <= 200 MM - 1150 MPA <= R[M] <= 1300 MPA
PREN 10025-3 : DRAFT 2011 HOT ROLLED PRODUCTS OF STRUCTURAL STEELS - PART 3: TECHNICAL DELIVERY CONDITIONS FOR NORMALIZED/NORMALIZED ROLLED WELDABLE FINE GRAIN STRUCTURAL STEELS
I.S. EN 2030:2013 AEROSPACE SERIES - STEEL X105CRMO17 (1.3544) - HARDENED AND TEMPERED - BARS - D[E] <= 150 MM
11/30191093 DC : 0 BS ISO 10799-1 - COLD FORMED WELDED STRUCTURAL HOLLOW SECTIONS OF NON-ALLOY AND FINE GRAIN STEELS - PART 1: TECHNICAL DELIVERY CONDITIONS
10/30216796 DC : DRAFT SEP 2010 BS ISO 3076 - ROUND STEEL SHORT LINK CHAINS FOR GENERAL LIFTING PURPOSES - MEDIUM TOLERANCE SLING CHAINS FOR CHAIN SLINGS - GRADE 8
14/30268499 DC : 0 BS ISO 16872 - ROUND STEEL SHORT LINK CHAINS FOR LIFTING PURPOSES - FINE TOLERANCE HOIST CHAINS FOR HAND OPERATED CHAIN HOISTS - GRADE VH
DIN EN 14917:2012-06 Metal bellows expansion joints for pressure applications (includes Amendment A1:2012)
BIS IS/ISO 5832-8 : 1997 IMPLANTS FOR SURGERY - METALLIC MATERIALS - PART 8: WROUGHT COBALT-NICKEL-CHROMIUM-MOLYBDENUM-TUNGSTEN-IRON ALLOY
11/30230618 DC : 0 BS ISO 683-2 - HEAT-TREATABLE STEELS, ALLOY STEELS AND FREE-CUTTING STEELS - PART 2: ALLOY STEELS FOR QUENCHING AND TEMPERING
BS ISO 5832-14:2007 Implants for surgery. Metallic materials Wrought titanium 15-molybdenum 5-zirconium 3-aluminium alloy
ISO 17440:2014 Cranes General design Limit states and proof of competence of forged steel hooks
AGMA 2004 : C GEAR MATERIALS, HEAT TREATMENT AND PROCESSING MANUAL
17/30339115 DC : 0 ISO/DIS 4978 - STEEL SHEET AND STRIP FOR WELDED GAS CYLINDERS
EN 4700-002:2016 Aerospace series - Steel and heat resisting alloys - Wrought products - Technical specification - Part 002: Bar and section
17/30368523 DC : 0 BS ISO 13782 - IMPLANTS FOR SURGERY - METALLIC MATERIALS - UNALLOYED TANTALUM FOR SURGICAL IMPLANT APPLICATIONS
ISO 5832-2:2018 Implants for surgery — Metallic materials — Part 2: Unalloyed titanium
98/705334 DC : DRAFT MAR 1998 ISO/CD 12732 - METHOD FOR ELECTROCHEMICAL POTENTIOKINETIC REACTIVATION TEST (BASED ON CIHAL&#39;S METHOD)
UNI EN ISO 12732 : 2008 CORROSION OF METALS AND ALLOYS - ELECTROCHEMICAL POTENTIOKINETIC REACTIVATION MEASUREMENT USING THE DOUBLE LOOP METHOD (BASED ON CIHAL&#39;S METHOD)
13/30265064 DC : 0 BS ISO 630-5 - STRUCTURAL STEELS - PART 5: TECHNICAL DELIVERY CONDITIONS FOR STRUCTURAL STEELS WITH IMPROVED ATMOSPHERIC CORROSION RESISTANCE
ISO 16877:2015 Round steel short link chains for lifting purposes Fine tolerance hoist chains for hand operated chain hoists Grade TH
UNI EN 4800-004 : 2011 AEROSPACE SERIES - TITANIUM AND TITANIUM ALLOYS - TECHNICAL SPECIFICATION - PART 004: WIRE
BS ISO 12891-2:2014 Retrieval and analysis of surgical implants Analysis of retrieved surgical implants
UNI EN 4631 : 2013 AEROSPACE SERIES - STEEL X4CRNIMO16-5-1 (1.4418) - AIR MELTED - HARDENED AND TEMPERED - BAR - D[E] <= 200 MM - 900 MPA <= R[M] <= 1050 MPA
I.S. EN 4721:2014 AEROSPACE SERIES - STEEL X4CRNIMO16-5-1 (1.4418) - AIR MELTED AND ELECTROSLAG REMELTED (ESR) - HARDENED AND TEMPERED - BAR - D[E] <= 200 MM - 900 MPA <= R[M] <= 1050 MPA
06/30155635 DC : 0 EN 13261 - RAILWAY APPLICATIONS - WHEELSETS AND BOGIES - AXLES - PRODUCT REQUIREMENTS
UNI EN 4800-005 : 2011 AEROSPACE SERIES - TITANIUM AND TITANIUM ALLOYS - TECHNICAL SPECIFICATION - PART 005: FORGING STOCK
06/19981869 DC : DRAFT OCT 2006 BS ISO 16877 - SHORT LINK CHAIN FOR LIFTING PURPOSES - GRADE TH, FINE TOLERANCE FOR MANUALLY OPERATED CHAIN HOISTS
07/30144593 DC : 0 BS ISO 10384 - HOT-ROLLED CARBON STEEL SHEET AS DEFINED BY CHEMICAL COMPOSITION
05/30132585 DC : DRAFT APR 2005 EN 10083-1 - STEELS FOR QUENCHING AND TEMPERING - PART 1: GENERAL TECHNICAL DELIVERY CONDITIONS
I.S. EN 4800-006:2010 AEROSPACE SERIES - TITANIUM AND TITANIUM ALLOYS - TECHNICAL SPECIFICATION - PART 006: PRE-PRODUCTION AND PRODUCTION FORGINGS
DIN EN 10025-2:2011-04 (Draft) HOT ROLLED PRODUCTS OF STRUCTURAL STEELS - PART 2: TECHNICAL DELIVERY CONDITIONS FOR NON-ALLOY STRUCTURAL STEELS
DIN EN 10343:2009-07 STEELS FOR QUENCHING AND TEMPERING FOR CONSTRUCTION PURPOSES - TECHNICAL DELIVERY CONDITIONS
DIN EN 10025-3:2011-04 (Draft) HOT ROLLED PRODUCTS OF STRUCTURAL STEELS - PART 3: TECHNICAL DELIVERY CONDITIONS FOR NORMALIZED/NORMALIZED ROLLED WELDABLE FINE GRAIN STRUCTURAL STEELS
DIN 685-2:2001-02 ROUND STEEL LINK CHAINS, TESTED - PART 2: SAFETY REQUIREMENTS
ISO 945-1:2017 Microstructure of cast irons Part 1: Graphite classification by visual analysis
ISO 16798:2004 Links of Grade 8 for use with slings
PREN 764-4 : DRAFT 2012 PRESSURE EQUIPMENT - PART 4: ESTABLISHMENT OF TECHNICAL DELIVERY CONDITIONS FOR METALLIC MATERIALS
PREN 10149-2 : DRAFT 2011 HOT ROLLED FLAT PRODUCTS MADE OF HIGH YIELD STRENGTH STEELS FOR COLD FORMING - PART 2: DELIVERY CONDITIONS FOR THERMOMECHANICALLY ROLLED STEELS
PREN 10028-3 : DRAFT 2014 FLAT PRODUCTS MADE OF STEELS FOR PRESSURE PURPOSES - PART 3: WELDABLE FINE GRAIN STEELS, NORMALIZED
I.S. EN 4800-002:2010 AEROSPACE SERIES - TITANIUM AND TITANIUM ALLOYS - TECHNICAL SPECIFICATION - PART 002: BAR AND SECTION
ISO 20160:2006 Implants for surgery Metallic materials Classification of microstructures for alpha+beta titanium alloy bars
ISO 14661:2000 Thermal turbines for industrial applications (steam turbines, gas expansion turbines) General requirements
ISO 683-1:2016 Heat-treatable steels, alloy steels and free-cutting steels Part 1: Non-alloy steels for quenching and tempering
DIN EN ISO 945-1 E : 2010 MICROSTRUCTURE OF CAST IRONS - PART 1: GRAPHITE CLASSIFICATION BY VISUAL ANALYSIS
UNI EN 12807 : 2009 LPG EQUIPMENT AND ACCESSORIES - TRANSPORTABLE REFILLABLE BRAZED STEEL CYLINDERS FOR LIQUEFIED PETROLEUM GAS (LPG) - DESIGN AND CONSTRUCTION
PREN ISO 683-17 : DRAFT 2013 HEAT-TREATED STEELS, ALLOY STEELS AND FREE-CUTTING STEELS - PART 17: BALL AND ROLLER BEARING STEELS (ISO/DIS 683-17:2013)
UNE-EN ISO 4885:2017 Ferrous materials - Heat treatments - Vocabulary (ISO 4885:2017)
EN ISO 4885:2018 Ferrous materials - Heat treatments - Vocabulary (ISO 4885:2018)
I.S. EN 4629:2013 AEROSPACE SERIES - STEEL X4CRNIMO16-5-1 (1.4418) - AIR MELTED - SOFTENED - FORGING STOCK - D[E] <= 300 MM
17/30346741 DC : 0 BS EN 10225-1 - WELDABLE STRUCTURAL STEELS FOR FIXED OFFSHORE STRUCTURES - TECHNICAL DELIVERY CONDITIONS - PART 1: PLATES
EN 10083-1:2006 Steels for quenching and tempering - Part 1: General technical delivery conditions
EN 10025-3:2004 Hot rolled products of structural steels - Part 3: Technical delivery conditions for normalized/normalized rolled weldable fine grain structural steels
DIN EN 12807:2016-09 (Draft) LPG EQUIPMENT AND ACCESSORIES - TRANSPORTABLE REFILLABLE BRAZED STEEL CYLINDERS FOR LIQUEFIED PETROLEUM GAS (LPG) - DESIGN AND CONSTRUCTION
ISO 9330-3:1997 Welded steel tubes for pressure purposes — Technical delivery conditions — Part 3: Electric resistance and induction welded unalloyed and alloyed steel tubes with specified low temperature properties
ISO 4954:1993 Steels for cold heading and cold extruding
DIN EN 10216-5:2014-03 Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 5: Stainless steel tubes
DIN EN 1677-4:2009-03 COMPONENTS FOR SLINGS - SAFETY - PART 4: LINKS, GRADE 8
DIN EN 1677-1:2009-03 COMPONENTS FOR SLINGS - SAFETY - PART 1: FORGED STEEL COMPONENTS, GRADE 8
DIN EN 1677-5:2009-03 COMPONENTS FOR SLINGS - SAFETY - PART 5: FORGED STEEL LIFTING HOOKS WITH LATCH - GRADE 4
DIN EN 1442:2008-04 LPG EQUIPMENT AND ACCESSORIES - TRANSPORTABLE REFILLABLE WELDED STEEL CYLINDERS FOR LPG - DESIGN AND CONSTRUCTION
DIN EN 15049:2007-12 Railway applications - Suspension components - Torsion bar, steel
ISO 11960:2014 Petroleum and natural gas industries Steel pipes for use as casing or tubing for wells
I.S. EN 10216-3:2013 SEAMLESS STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 3: ALLOY FINE GRAIN STEEL TUBES
ONORM EN 13261 : 2012 RAILWAY APPLICATIONS - WHEELSETS AND BOGIES - AXLES - PRODUCT REQUIREMENTS
I.S. EN 10216-5:2013 SEAMLESS STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 5: STAINLESS STEEL TUBES
I.S. EN 13889:2003 FORGED STEEL SHACKLES FOR GENERAL LIFTING PURPOSES - DEE SHACKLES AND BOW SHACKLES - GRADE 6 - SAFETY
DIN EN 10210-1:2006-07 Hot finished structural hollow sections of non-alloy and fine grain steels - Part 1: Technical delivery conditions
I.S. EN 1677-5:2001 COMPONENTS FOR SLINGS - SAFETY - PART 5: FORGED STEEL LIFTING HOOKS WITH LATCH - GRADE 4
I.S. EN 818-7:2002 SHORT LINK CHAIN FOR LIFTING PURPOSES - SAFETY - PART 7: FINE TOLERANCE HOIST CHAIN, GRADE T (TYPES T, DAT AND DT)
I.S. EN 818-3:1999 SHORT LINK CHAIN FOR LIFTING PURPOSES - SAFETY - PART 3: MEDIUM TOLERANCE CHAIN FOR CHAIN SLINGS - GRADE 4
I.S. EN 1677-6:2001 COMPONENTS FOR SLINGS - SAFETY - PART 6: LINKS - GRADE 4
I.S. EN 1677-4:2001 COMPONENTS FOR SLINGS - SAFETY - PART 4: LINKS, GRADE 8
I.S. EN 10028-7:2016&LC:2016 FLAT PRODUCTS MADE OF STEELS FOR PRESSURE PURPOSES - PART 7: STAINLESS STEELS
I.S. EN 1442:2017 LPG EQUIPMENT AND ACCESSORIES - TRANSPORTABLE REFILLABLE WELDED STEEL CYLINDERS FOR LPG - DESIGN AND CONSTRUCTION
I.S. EN 14140:2014 LPG EQUIPMENT AND ACCESSORIES - TRANSPORTABLE REFILLABLE WELDED STEEL CYLINDERS FOR LPG - ALTERNATIVE DESIGN AND CONSTRUCTION
I.S. EN 10149-1:2013 HOT ROLLED FLAT PRODUCTS MADE OF HIGH YIELD STRENGTH STEELS FOR COLD FORMING - PART 1: GENERAL TECHNICAL DELIVERY CONDITIONS
I.S. EN 10028-3:2017 FLAT PRODUCTS MADE OF STEELS FOR PRESSURE PURPOSES - PART 3: WELDABLE FINE GRAIN STEELS, NORMALIZED
I.S. EN ISO 11960:2014 PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL PIPES FOR USE AS CASING OR TUBING FOR WELLS (ISO 11960:2014)
I.S. EN 10219-1:2006 COLD FORMED WELDED STRUCTURAL HOLLOW SECTIONS OF NON-ALLOY AND FINE GRAIN STEELS - PART 1: TECHNICAL DELIVERY CONDITIONS
I.S. EN 10083-2:2006 STEELS FOR QUENCHING AND TEMPERING - PART 2: TECHNICAL DELIVERY CONDITIONS FOR NON ALLOY STEELS
I.S. EN ISO 683-17:2014 HEAT-TREATED STEELS, ALLOY STEELS AND FREE-CUTTING STEELS - PART 17: BALL AND ROLLER BEARING STEELS (ISO 683-17:2014)
DIN EN 10028-3:2017-10 FLAT PRODUCTS MADE OF STEELS FOR PRESSURE PURPOSES - PART 3: WELDABLE FINE GRAIN STEELS, NORMALIZED
DIN EN 818-3:2008-12 SHORT LINK CHAIN FOR LIFTING PURPOSES - SAFETY - PART 3: MEDIUM TOLERANCE CHAIN FOR CHAIN SLINGS - GRADE 4
I.S. EN 10210-1:2006 HOT FINISHED STRUCTURAL HOLLOW SECTIONS OF NON-ALLOY AND FINE GRAIN STEELS - PART 1: TECHNICAL DELIVERY CONDITIONS
I.S. EN 1677-1:2000 COMPONENTS FOR SLINGS - SAFETY - PART 1: FORGED STEEL COMPONENTS, GRADE 8
DIN EN 10083-3:2007-01 STEELS FOR QUENCHING AND TEMPERING - PART 3: TECHNICAL DELIVERY CONDITIONS FOR ALLOY STEELS
I.S. EN 764-4:2014 PRESSURE EQUIPMENT - PART 4: ESTABLISHMENT OF TECHNICAL DELIVERY CONDITIONS FOR METALLIC MATERIALS
I.S. EN 818-2:1997 SHORT LINK CHAIN FOR LIFTING PURPOSES - SAFETY - PART 2: MEDIUM TOLERANCE CHAIN FOR CHAIN SLINGS - GRADE 8
DIN ISO 5832-9:2008-12 IMPLANTS FOR SURGERY - METALLIC MATERIALS - PART 9: WROUGHT HIGH NITROGEN STAINLESS STEEL
I.S. EN 10277-1:2008 BRIGHT STEEL PRODUCTS - TECHNICAL DELIVERY CONDITIONS - PART 1: GENERAL
DIN EN 10277-1:2008-06 BRIGHT STEEL PRODUCTS - TECHNICAL DELIVERY CONDITIONS - PART 1: GENERAL
DIN EN 10025-1:2005-02 Hot rolled products of structural steels - Part 1: General technical delivery conditions; German version EN 10025-1:2004
UNI EN 1677-6 : 2009 COMPONENTS FOR SLINGS - SAFETY - PART 6: LINKS - GRADE 4
BS 7252-1:1997 Metallic materials for surgical implants Specification for wrought stainless steel
BS 7252-8:1997 Metallic materials for surgical implants Specification for wrought cobalt-nickel-chromium-molybdenum-tungsten-iron alloy
BS 7252-6:1997 Metallic materials for surgical implants Specification for wrought cobalt-nickel-chromium-molybdenum alloy
VDI 3405 Blatt 2:2013-08 Additive manufacturing processes, rapid manufacturing - Beam melting of metallic parts - Qualification, quality assurance and post processing
DIN ISO 5832-12 E : 2009 IMPLANTS FOR SURGERY - METALLIC MATERIALS - PART 12: WROUGHT COBALT-CHROMIUM-MOLYBDENUM ALLOY
DIN EN ISO 4885 E : 2017 FERROUS MATERIALS - HEAT TREATMENTS - VOCABULARY (ISO 4885:2017)
UNI EN 2030 : 2014 AEROSPACE SERIES - STEEL X105CRMO17 (1.3544) - HARDENED AND TEMPERED - BARS - D[E] <= 150 MM
GOST R EN 818-3 : 2005 SHORT LINK STEEL CHAINS FOR LIFTING PURPOSES - SAFETY - PART 3: MEDIUM TOLERANCE STEEL CHAINS FOR GRADE 4 CHAIN SLINGS
16/30332608 DC : DRAFT JAN 2016 BS EN 10210-2 - HOT FINISHED STRUCTURAL STEEL HOLLOW SECTIONS - PART 2: TECHNICAL DELIVERY CONDITIONS
BS EN 4700-004:2010 Aerospace series. Steel and heat resisting alloys. Wrought products. Technical specification Wire
BS 7252-7:1990 Metallic materials for surgical implants Specification for cobalt-chromium-nickel-molybdenum-iron alloy
12/30259070 DC : 0 BS EN 764-4 - PRESSURE EQUIPMENT - PART 4: ESTABLISHMENT OF TECHNICAL DELIVERY CONDITIONS FOR METALLIC MATERIALS
I.S. EN 10025-2:2004 HOT ROLLED PRODUCTS OF STRUCTURAL STEELS - PART 2: TECHNICAL DELIVERY CONDITIONS FOR NON-ALLOY STRUCTURAL STEELS
11/30243868 DC : 0 BS EN 4630 - AEROSPACE SERIES - STEEL FE-PM 3504 (X4CRNIMO16-5-1) - AIR MELTED - HARDENED AND TEMPERED - FORGINGS - D[E] <= 200 MM - 900 MPA <= R[M] <= 1050 MPA
BS EN 4721:2014 Aerospace series. Steel X4CrNiMo16-5-1 (1.4418). Air melted and electroslag remelted (ESR). Hardened and tempered. Bar. De ≤ 200 mm. 900 MPa ≤ Rm ≤ 1 050 MPa
ISO 2604-6:1978 Steel products for pressure purposes Quality requirements Part 6: Submerged arc longitudinally or spirally welded steel tubes
14/30295082 DC : 0 BS ISO 683-3 - HEAT-TREATABLE STEELS, ALLOY STEELS AND FREE-CUTTING STEELS - PART 3: CASE HARDENING STEELS
PREN 10025-4 : DRAFT 2011 HOT ROLLED PRODUCTS OF STRUCTURAL STEELS - PART 4: TECHNICAL DELIVERY CONDITIONS FOR THERMOMECHANICAL ROLLED WELDABLE FINE GRAIN STRUCTURAL STEELS
BS EN 4700-002:2016 Aerospace series. Steel and heat resisting alloys. Wrought products. Technical specification Bar and section
03/111274 DC : DRAFT AUG 2003 ISO 9328-5 - STEEL PLATES AND STRIPS FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 5: WELDABLE FINE GRAIN STEELS, THERMOMECHANICALLY ROLLED
09/30196511 DC : 0 BS ISO 9328-7 - STEEL FLAT PRODUCTS FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 7: STAINLESS STEELS
UNI EN 4700-004 : 2011 Aerospace series - Steel and heat resisting alloys - Wrought products - Technical specification - Part 004: Wire
BS EN 4800-006:2010 Aerospace series. Titanium and titanium alloys. Technical specification Pre-production and production forgings
18/30362597 DC : 0 BS ISO 5832-12 - IMPLANTS FOR SURGERY - METALLIC MATERIALS - PART 12: WROUGHT COBALT-CHROMIUM-MOLYBDENUM ALLOY
UNI EN 4500-004 : 2014 AEROSPACE SERIES - METALLIC MATERIALS - RULES FOR DRAFTING AND PRESENTATION OF MATERIAL STANDARDS - PART 004: SPECIFIC RULES FOR TITANIUM AND TITANIUM ALLOYS
BS EN 4800-005:2010 Aerospace series. Titanium and titanium alloys. Technical specification Forging stock
UNI EN 10216-5 : 2014 SEAMLESS STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 5: STAINLESS STEEL TUBES
BS ISO 11891:2012 Hot formed helical compression springs. Technical specifications
17/30346735 DC : 0 BS EN 10225-3 - WELDABLE STRUCTURAL STEELS FOR FIXED OFFSHORE STRUCTURES - TECHNICAL DELIVERY CONDITIONS - PART 3: HOT FINISHED HOLLOW SECTIONS
11/30239482 DC : 0 BS EN 10025-4 - HOT ROLLED PRODUCTS OF STRUCTURAL STEELS - PART 4: TECHNICAL DELIVERY CONDITIONS FOR THERMOMECHANICAL ROLLED WELDABLE FINE GRAIN STRUCTURAL STEELS
11/30239473 DC : 0 BS EN 10025-1 - HOT ROLLED PRODUCTS OF STRUCTURAL STEELS - PART 1: GENERAL TECHNICAL DELIVERY CONDITIONS
ONORM EN 10216-5 : 2014 SEAMLESS STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 5: STAINLESS STEEL TUBES
12/30248681 DC : 0 BS EN 14140 - LPG EQUIPMENT AND ACCESSORIES - TRANSPORTABLE REFILLABLE WELDED STEEL CYLINDERS FOR LPG - ALTERNATIVE DESIGN AND CONSTRUCTION
ISO 10384:2012 Hot-rolled carbon steel sheet as defined by chemical composition
EN 13001-3-5:2016 Cranes - General design - Part 3-5: Limit states and proof of competence of forged hooks
06/19981867 DC : DRAFT OCT 2006 BS ISO 16872 - SHORT LINK CHAIN FOR LIFTING PURPOSES - GRADE VH, FINE TOLERANCE FOR MANUALLY OPERATED CHAIN HOISTS
BS EN 4800-004:2010 Aerospace series. Titanium and titanium alloys. Technical specification Wire
BS EN 4630:2014 Aerospace series. Steel X4CrNiMo16-5-1 (1.4418). Air melted. Hardened and tempered. Forgings. De ≤ 200 mm. 900 MPa ≤ Rm ≤ 1 050 MPa
11/30230615 DC : 0 BS ISO 683-1 - HEAT-TREATABLE STEELS, ALLOY STEELS AND FREE-CUTTING STEELS - PART 1: NON-ALLOY STEELS FOR QUENCHING AND TEMPERING
I.S. EN 4500-004:2012 AEROSPACE SERIES - METALLIC MATERIALS - RULES FOR DRAFTING AND PRESENTATION OF MATERIAL STANDARDS - PART 004: SPECIFIC RULES FOR TITANIUM AND TITANIUM ALLOYS
06/30099306 DC : DRAFT JUN 2006 BS ISO 5832-9 - IMPLANTS FOR SURGERY - METALLIC MATERIALS - PART 9: WROUGHT HIGH NITROGEN STAINLESS STEEL
BS ISO 14661:2000 Thermal turbines for industrial applications (steam turbines, gas expansion turbines). General requirements
05/30132603 DC : DRAFT APR 2005 EN 10083-3 - STEELS FOR QUENCHING AND TEMPERING - PART 3: TECHNICAL DELIVERY CONDITIONS FOR ALLOY STEELS
BS EN 4500-004:2012 Aerospace series. Metallic materials. Rules for drafting and presentation of material standards Specific rules for titanium and titanium alloys
DIN EN 14917 E : 2012 METAL BELLOWS EXPANSION JOINTS FOR PRESSURE APPLICATIONS
I.S. EN 4500-003:2012 AEROSPACE SERIES - METALLIC MATERIALS - RULES FOR DRAFTING AND PRESENTATION OF MATERIAL STANDARDS - PART 003: SPECIFIC RULES FOR HEAT RESISTING ALLOYS
I.S. EN ISO 4885:2017 FERROUS MATERIALS - HEAT TREATMENTS - VOCABULARY (ISO 4885:2018)
BS EN 10025-4:2004 Hot rolled products of structural steels Technical delivery conditions for thermomechanical rolled weldable fine grain structural steels
I.S. EN ISO 12732:2008 CORROSION OF METALS AND ALLOYS - ELECTROCHEMICAL POTENTIOKINETIC REACTIVATION MEASUREMENT USING THE DOUBLE LOOP METHOD (BASED ON CIHAL&#39;S METHOD)
I.S. EN ISO 5832-2:2012 IMPLANTS FOR SURGERY - METALLIC MATERIALS - PART 2: UNALLOYED TITANIUM (ISO 5832-2:2018)
PREN 10210-2 : DRAFT 2016 HOT FINISHED STRUCTURAL STEEL HOLLOW SECTIONS - PART 2: TECHNICAL DELIVERY CONDITIONS
I.S. EN 4700-001:2010 AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 001: PLATE, SHEET AND STRIP
UNI EN 4700-003 : 2011 AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 003: TUBE
ISO 5832-12:2007 Implants for surgery Metallic materials Part 12: Wrought cobalt-chromium-molybdenum alloy
I.S. EN 4800-004:2010 AEROSPACE SERIES - TITANIUM AND TITANIUM ALLOYS - TECHNICAL SPECIFICATION - PART 004: WIRE
ISO 683-18:2014 Heat-treatable steels, alloy steels and free-cutting steels — Part 18: Bright steel products
KTA 3211.1 : 2015 PRESSURE AND ACTIVITY RETAINING COMPONENTS OF SYSTEMS OUTSIDE THE PRIMARY CIRCUIT - PART 1: MATERIALS
I.S. EN 10025-3:2004 HOT ROLLED PRODUCTS OF STRUCTURAL STEELS - PART 3: TECHNICAL DELIVERY CONDITIONS FOR NORMALIZED/NORMALIZED ROLLED WELDABLE FINE GRAIN STRUCTURAL STEELS
ISO 5832-5:2005 Implants for surgery Metallic materials Part 5: Wrought cobalt-chromium-tungsten-nickel alloy
PREN 10025-2 : DRAFT 2011 HOT ROLLED PRODUCTS OF STRUCTURAL STEELS - PART 2: TECHNICAL DELIVERY CONDITIONS FOR NON-ALLOY STRUCTURAL STEELS
EN 10025-2:2004/AC:2005 HOT ROLLED PRODUCTS OF STRUCTURAL STEELS - PART 2: TECHNICAL DELIVERY CONDITIONS FOR NON-ALLOY STRUCTURAL STEELS
ISO 2604-2:1975 Steel products for pressure purposes Quality requirements Part 2: Wrought seamless tubes
ISO 11891:2012 Hot formed helical compression springs — Technical specifications
ISO 7593:1986 Chain slings assembled by methods other than welding — Grade T(8)
ISO 5832-7:2016 Implants for surgery — Metallic materials — Part 7: Forgeable and cold-formed cobalt-chromium-nickel-molybdenum-iron alloy
I.S. EN 4627:2014 AEROSPACE SERIES - STEEL X4CRNIMO16-5-1 (1.4418) - AIR MELTED - HARDENED AND TEMPERED - FORGINGS - D[E] <= 200 MM - 1150 MPA <= R[M] <= 1300 MPA
I.S. EN 15566:2016 RAILWAY APPLICATIONS - RAILWAY ROLLING STOCK - DRAW GEAR AND SCREW COUPLING
ISO 6336-5:2016 Calculation of load capacity of spur and helical gears Part 5: Strength and quality of materials
I.S. EN 14917:2009 METAL BELLOWS EXPANSION JOINTS FOR PRESSURE APPLICATIONS
ISO 5832-9:2007 Implants for surgery Metallic materials Part 9: Wrought high nitrogen stainless steel
EN 10028-7:2016 Flat products made of steels for pressure purposes - Part 7: Stainless steels
DIN EN 10083-1:2006-10 STEELS FOR QUENCHING AND TEMPERING - PART 1: GENERAL TECHNICAL DELIVERY CONDITIONS
DIN EN ISO 683-17:2015-02 Heat-treated steels, alloy steels and free-cutting steels - Part 17: Ball and roller bearing steels (ISO 683-17:2014)
DIN EN 1677-6:2009-03 COMPONENTS FOR SLINGS - SAFETY - PART 6: LINKS - GRADE 4
DIN EN 818-2:2008-12 SHORT LINK CHAIN FOR LIFTING PURPOSES - SAFETY - PART 2: MEDIUM TOLERANCE CHAIN FOR CHAIN SLINGS - GRADE 8
DIN EN 10216-3:2014-03 SEAMLESS STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 3: ALLOY FINE GRAIN STEEL TUBES
DIN EN ISO 11960:2014-05 Petroleum and natural gas industries - Steel pipes for use as casing or tubing for wells (ISO 11960:2014); English version EN ISO 11960:2014, only on CD-ROM
DIN EN 14140:2015-03 LPG EQUIPMENT AND ACCESSORIES - TRANSPORTABLE REFILLABLE WELDED STEEL CYLINDERS FOR LPG - ALTERNATIVE DESIGN AND CONSTRUCTION
BS EN 13889 : 2003 FORGED STEEL SHACKLES FOR GENERAL LIFTING PURPOSES - DEE SHACKLES AND BOW SHACKLES - GRADE 6 - SAFETY
UNE-EN 764-4:2015 Pressure equipment - Part 4: Establishment of technical delivery conditions for metallic materials
ISO 13782:1996 Implants for surgery Metallic materials Unalloyed tantalum for surgical implant applications
UNI EN 13261 : 2011 RAILWAY APPLICATIONS - WHEELSETS AND BOGIES - AXLES - PRODUCT REQUIREMENTS
EN 13261:2009+A1:2010 Railway applications - Wheelsets and bogies - Axles - Product requirements
UNI EN 1677-1 : 2009 COMPONENTS FOR SLINGS - SAFETY - PART 1: FORGED STEEL COMPONENTS, GRADE 8
UNI EN ISO 683-17 : 2014 HEAT-TREATED STEELS, ALLOY STEELS AND FREE-CUTTING STEELS - PART 17: BALL AND ROLLER BEARING STEELS
UNI EN 1677-4 : 2009 COMPONENTS FOR SLINGS - SAFETY - PART 4: LINKS, GRADE 8
UNI EN 10083-1 : 2006 STEELS FOR QUENCHING AND TEMPERING - PART 1: GENERAL TECHNICAL DELIVERY CONDITIONS
UNI EN 10219-1 : 2006 COLD FORMED WELDED STRUCTURAL HOLLOW SECTIONS OF NON-ALLOY AND FINE GRAIN STEELS - PART 1: TECHNICAL DELIVERY CONDITIONS
UNI EN 13889 : 2009 FORGED STEEL SHACKLES FOR GENERAL LIFTING PURPOSES - DEE SHACKLES AND BOW SHACKLES - GRADE 6: SAFETY
UNI EN 10083-3 : 2006 STEELS FOR QUENCHING AND TEMPERING - PART 3: TECHNICAL DELIVERY CONDITIONS FOR ALLOY STEELS
UNI EN 10218-1 : 2012 STEEL WIRE AND WIRE PRODUCTS - GENERAL - PART 1: TEST METHODS
UNI EN 818-3 : 2008 SHORT LINK CHAIN FOR LIFTING PURPOSES - SAFETY - PART 3: MEDIUM TOLERANCE CHAIN FOR CHAIN SLINGS - GRADE 4
UNI EN 818-7 : 2008 SHORT LINK CHAIN FOR LIFTING PURPOSES - SAFETY - PART 7: FINE TOLERANCE HOIST CHAIN, GRADE T (TYPES T, DAT AND DT)
UNI EN 10084 : 2008 CASE HARDENING STEELS - TECHNICAL DELIVERY CONDITIONS
UNI EN 14140 : 2015 LPG EQUIPMENT AND ACCESSORIES - TRANSPORTABLE REFILLABLE WELDED STEEL CYLINDERS FOR LPG - ALTERNATIVE DESIGN AND CONSTRUCTION
UNI EN 10216-3 : 2014 SEAMLESS STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 3: ALLOY FINE GRAIN STEEL TUBES
UNI EN 1677-5 : 2009 COMPONENTS FOR SLINGS - SAFETY - PART 5: FORGED STEEL LIFTING HOOKS WITH LATCH - GRADE 4
UNI EN 818-2 : 2008 SHORT LINK CHAIN FOR LIFTING PURPOSES - SAFETY - PART 2: MEDIUM TOLERANCE CHAIN FOR CHAIN SLINGS - GRADE 8
UNI EN 10149-1 : 2013 HOT ROLLED FLAT PRODUCTS MADE OF HIGH YIELD STRENGTH STEELS FOR COLD FORMING - PART 1: GENERAL TECHNICAL DELIVERY CONDITIONS
UNI EN 4800-001 : 2011 AEROSPACE SERIES - TITANIUM AND TITANIUM ALLOYS - TECHNICAL SPECIFICATION - PART 001: PLATE, SHEET AND STRIP
10/30198921 DC : 0 BS ISO 11891 - HOT FORMED HELICAL COMPRESSION SPRINGS - TECHNICAL SPECIFICATIONS
AGMA 923 : B METALLURGICAL SPECIFICATIONS OF STEEL GEARING
11/30243869 DC : 0 BS EN 4631 - AEROSPACE SERIES - STEEL FE-PM 3504 (X4CRNIMO16-5-1) - AIR MELTED - HARDENED AND TEMPERED - BAR - D[E] <= 200 MM - 900 MPA <= R[M] <= 1050 MPA
UNI EN 4800-003 : 2011 AEROSPACE SERIES - TITANIUM AND TITANIUM ALLOYS - TECHNICAL SPECIFICATION - PART 003: TUBE
ISO 9330-5:2000 Welded steel tubes for pressure purposes — Technical delivery conditions — Part 5: Submerged arc-welded unalloyed and alloyed steel tubes with specified low temperature properties
DIN ISO 5832-7:2001-07 IMPLANTS FOR SURGERY - METALLIC MATERIALS - PART 7: FORGEABLE AND COLD-FORMED COBALT-CHROMIUM-NICKEL-MOLYBDENUM-IRON ALLOY (ISO 5832-7:2016)
BS ISO 20160:2006 Implants for surgery. Metallic materials. Classification of microstructures for alpha+beta titanium alloy bars
I.S. EN 10025-1:2004 HOT ROLLED PRODUCTS OF STRUCTURAL STEELS - PART 1: GENERAL TECHNICAL DELIVERY CONDITIONS
EN 10216-5:2013 Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 5: Stainless steel tubes
14/30300966 DC : 0 BS EN 1442 - LPG EQUIPMENT AND ACCESSORIES - TRANSPORTABLE REFILLABLE WELDED STEEL CYLINDERS FOR LPG - DESIGN AND CONSTRUCTION
06/30086672 DC : DRAFT JUN 2006 BS ISO 5832-12 - IMPLANTS FOR SURGERY - METALLIC MATERIALS - PART 12: WROUGHT COBALT-CHROMIUM-MOLYBDENUM ALLOY
BS ISO 683-5:2017 Heat treatable steels, alloy steels and free-cutting steels Nitriding steels
00/704586 DC : DRAFT JAN 2000 ISO/DIS 3077 - SHORT-LINK CHAIN FOR LIFTING PURPOSES
13/30268502 DC : 0 BS ISO 16877 - ROUND STEEL SHORT LINK CHAINS FOR LIFTING PURPOSES - FINE TOLERANCE HOIST CHAINS FOR HAND OPERATED CHAIN HOISTS - GRADE TH
DIN EN ISO 3266:2016-05 FORGED STEEL EYEBOLTS GRADE 4 FOR GENERAL LIFTING PURPOSES (ISO 3266:2010 + AMD 1:2015)
17/30346738 DC : 0 BS EN 10225-2 - WELDABLE STRUCTURAL STEELS FOR FIXED OFFSHORE STRUCTURES - TECHNICAL DELIVERY CONDITIONS - PART 2: SECTIONS
12/30252148 DC : 0 BS ISO 17440 - CRANES - GENERAL DESIGN - LIMIT STATES AND PROOF OF COMPETENCE OF FORGED STEEL HOOKS
UNI EN 10343 : 2009 STEELS FOR QUENCHING AND TEMPERING FOR CONSTRUCTION PURPOSES - TECHNICAL DELIVERY CONDITIONS
BS EN 4627:2014 Aerospace series. Steel X4CrNiMo16-5-1 (1.4418). Air melted. Hardened and tempered. Forgings. De ≤ 200 mm. 1 150 MPa ≤ Rm ≤ 1 300 MPa
BS EN 4700-003:2010 Aerospace series. Steel and heat resisting alloys. Wrought products. Technical specification Tube
DIN ISO 5832-14:2009-12 IMPLANTS FOR SURGERY - METALLIC MATERIALS - PART 14: WROUGHT TITANIUM 15-MOLYBDENUM 5-ZIRCONIUM 3-ALUMINIUM ALLOY
BS EN 4800-001:2010 Aerospace series. Titanium and titanium alloys. Technical specification Plate, sheet and strip
14/30294825 DC : 0 BS EN 10263-1 - STEEL ROD, BARS AND WIRE FOR COLD HEADING AND COLD EXTRUSION - PART 1: GENERAL TECHNICAL DELIVERY CONDITIONS
BS EN 2030:2013 Aerospace series. Steel X105CrMo17 (1.3544). Hardened and tempered. Bars. De ≤ 150 mm
BS ISO 17440:2014 Cranes. General design. Limit states and proof of competence of forged steel hooks
UNI EN 14917 : 2012 METAL BELLOWS EXPANSION JOINTS FOR PRESSURE APPLICATIONS
BS ISO 16872:2015 Round steel short link chains for lifting purposes. Fine tolerance hoist chains for hand operated chain hoists. Grade VH
BS EN 4800-002:2010 Aerospace series. Titanium and titanium alloys. Technical specification Bar and section
11/30230612 DC : 0 BS ISO 683-11 - HEAT-TREATABLE STEELS, ALLOY STEELS AND FREE-CUTTING STEELS - PART 11: CASE-HARDENING STEELS
BS EN 4800-003:2010 Aerospace series. Titanium and titanium alloys. Technical specification Tube
13/30242622 DC : 0 BS ISO 12891-2 - RETRIEVAL AND ANALYSIS OF SURGICAL IMPLANTS - PART 2: ANALYSIS OF RETRIEVED SURGICAL IMPLANTS
ISO 9329-3:1997 Seamless steel tubes for pressure purposes — Technical delivery conditions — Part 3: Unalloyed and alloyed steels with specified low temperature properties
16/30326542 DC : 0 BS ISO 5832-7 - IMPLANTS FOR SURGERY - METALLIC MATERIALS - PART 7: FORGEABLE AND COLD-FORMED COBALT-CHROMIUM-NICKEL-MOLYBDENUM-IRON ALLOY
03/111275 DC : DRAFT AUG 2003 ISO 9328-6 - STEEL PLATES AND STRIPS FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 6: WELDABLE FINE GRAIN STEELS, QUENCHED AND TEMPERED
BS ISO 12732 : 2006 CORROSION OF METALS AND ALLOYS - ELECTROCHEMICAL POTENTIOKINETIC REACTIVATION MEASUREMENT USING THE DOUBLE LOOP METHOD (BASED ON CIHAL&#39;S METHOD)
ISO 16872:2015 Round steel short link chains for lifting purposes Fine tolerance hoist chains for hand operated chain hoists Grade VH
03/111272 DC : DRAFT AUG 2003 ISO 9328-3 - STEEL PLATES AND STRIPS FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 3: WELDABLE FINE GRAIN STEELS, NORMALIZED
ISO 10799-1:2011 Cold-formed welded structural hollow sections of non-alloy and fine grain steels — Part 1: Technical delivery conditions
UNI EN 4627 : 2014 AEROSPACE SERIES - STEEL X4CRNIMO16-5-1 (1.4418) - AIR MELTED - HARDENED AND TEMPERED - FORGINGS - D[E] <= 200 MM - 1150 MPA <= R[M] <= 1300 MPA
BS ISO 5832-5:2005 Implants for surgery. Metallic materials Wrought cobalt-chromium-tungsten-nickel alloy
DIN EN 10025-4:2011-04 (Draft) HOT ROLLED PRODUCTS OF STRUCTURAL STEELS - PART 4: TECHNICAL DELIVERY CONDITIONS FOR THERMOMECHANICAL ROLLED WELDABLE FINE GRAIN STRUCTURAL STEELS
BS ISO 5832-12:2007 Implants for surgery. Metallic materials Wrought cobalt-chromium-molybdenum alloy
BS EN 15566:2016 Railway applications. Railway rolling stock. Draw gear and screw coupling
PREN 4631 : 200P2 AEROSPACE SERIES - STEEL X4CRNIMO16-5-1 (1.4418) - AIR MELTED - HARDENED AND TEMPERED - BAR - D[E] <= 200 MM - 900 MPA <= R[M] <= 1050 MPA
PREN 4629 : 200P2 AEROSPACE SERIES - STEEL X4CRNIMO16-5-1 (1.4418) - AIR MELTED - SOFTENED - FORGING STOCK - D[E] <= 300 MM
ISO 10799:2001 Structural steels Cold-formed, welded, structural hollow sections Technical delivery requirements
I.S. EN 4800-005:2010 AEROSPACE SERIES - TITANIUM AND TITANIUM ALLOYS - TECHNICAL SPECIFICATION - PART 005: FORGING STOCK
I.S. EN 10025-4:2004 HOT ROLLED PRODUCTS OF STRUCTURAL STEELS - PART 4: TECHNICAL DELIVERY CONDITIONS FOR THERMOMECHANICAL ROLLED WELDABLE FINE GRAIN STRUCTURAL STEELS
I.S. EN 10025-5:2004 HOT ROLLED PRODUCTS OF STRUCTURAL STEELS - PART 5: TECHNICAL DELIVERY CONDITIONS FOR STRUCTURAL STEELS WITH IMPROVED ATMOSPHERIC CORROSION RESISTANCE
ONORM EN ISO 11960 : 2014 PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL PIPES FOR USE AS CASING OR TUBING FOR WELLS (ISO 11960:2014)
ISO 9328-5:2018 Steel flat products for pressure purposes — Technical delivery conditions — Part 5: Weldable fine grain steels, thermomechanically rolled
I.S. EN ISO 3266:2010 FORGED STEEL EYEBOLTS GRADE 4 FOR GENERAL LIFTING PURPOSES (ISO 3266:2010)
ISO 5832-1:2016 Implants for surgery — Metallic materials — Part 1: Wrought stainless steel
ISO/TR 11637:1997 Boron treated engineering steels for quenching and tempering
ISO 2415:2004 Forged shackles for general lifting purposes — Dee shackles and bow shackles
BIS IS/ISO 5832-5 : 2005 IMPLANTS FOR SURGERY - METALLIC MATERIALS - PART 5: WROUGHT COBALT-CHROMIUM-TUNGSTEN-NICKEL ALLOY
UNI EN 4700-001 : 2011 AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 001: PLATE, SHEET AND STRIP
ASTM F 3160 : 2016 Standard Guide for Metallurgical Characterization of Absorbable Metallic Materials for Medical Implants
EN ISO 5832-2:2018 Implants for surgery - Metallic materials - Part 2: Unalloyed titanium (ISO 5832-2:2018)
ISO 683-5:2017 Heat treatable steels, alloy steels and free-cutting steels — Part 5: Nitriding steels
ISO 12891-2:2014 Retrieval and analysis of surgical implants Part 2: Analysis of retrieved surgical implants
ISO 630-5:2014 Structural steels — Part 5: Technical delivery conditions for structural steels with improved atmospheric corrosion resistance
EN 10025-4:2004 Hot rolled products of structural steels - Part 4: Technical delivery conditions for thermomechanical rolled weldable fine grain structural steels
ISO 8539:2009 Forged steel lifting components for use with Grade 8 chain
EN 12807:2009 LPG equipment and accessories - Transportable refillable brazed steel cylinders for liquefied petroleum gas (LPG) - Design and construction
EN ISO 945-1:2018 Microstructure of cast irons - Part 1: Graphite classification by visual analysis (ISO 945-1:2017)
ISO 5832-6:1997 Implants for surgery Metallic materials Part 6: Wrought cobalt-nickel-chromium-molybdenum alloy
ISO 5832-8:1997 Implants for surgery Metallic materials Part 8: Wrought cobalt-nickel-chromium-molybdenum- tungsten-iron alloy
ISO 683-11:2012 Heat-treatable steels, alloy steels and free-cutting steels Part 11: Case-hardening steels
I.S. EN 10263-1:2017 STEEL ROD, BARS AND WIRE FOR COLD HEADING AND COLD EXTRUSION - PART 1: GENERAL TECHNICAL DELIVERY CONDITIONS
I.S. EN 12807:2009 LPG EQUIPMENT AND ACCESSORIES - TRANSPORTABLE REFILLABLE BRAZED STEEL CYLINDERS FOR LIQUEFIED PETROLEUM GAS (LPG) - DESIGN AND CONSTRUCTION
DIN EN 818-7:2008-07 SHORT LINK CHAIN FOR LIFTING PURPOSES - SAFETY - PART 7: FINE TOLERANCE HOIST CHAIN, GRADE T (TYPES T, DAT AND DT)
DIN EN 15049 E : 2007 RAILWAY APPLICATIONS - SUSPENSION COMPONENTS - TORSION BAR, STEEL
DIN EN 10084:2008-06 CASE HARDENING STEELS - TECHNICAL DELIVERY CONDITIONS
DIN EN 10219-1:2016-01 (Draft) Cold formed welded structural steel hollow sections - Part 1: General; German and English version prEN 10219-1:2016
BS EN 10028-3:2017 Flat products made of steels for pressure purposes Weldable fine grain steels, normalized
UNE-EN 14140:2015 LPG equipment and accessories - Transportable refillable welded steel cylinders for LPG - Alternative design and construction
BS EN 10216-5:2013 Seamless steel tubes for pressure purposes. Technical delivery conditions Stainless steel tubes
BS EN 10025-1:2004 Hot rolled products of structural steels General technical delivery conditions
BS EN 10084 : 2008-06 CASE HARDENING STEELS - TECHNICAL DELIVERY CONDITIONS
ISO 3266:2010 Forged steel eyebolts grade 4 for general lifting purposes
BS EN 1677-1 : 2000 COMPONENTS FOR SLINGS - SAFETY - PART 1: FORGED STEEL COMPONENTS, GRADE 8
BS EN 10216-3:2013 Seamless steel tubes for pressure purposes. Technical delivery conditions Alloy fine grain steel tubes
BS EN 10083-2:2006 Steels for quenching and tempering Technical delivery conditions for non alloy steels
BS EN 818-7 : 2002 SHORT LINK CHAIN FOR LIFTING PURPOSES - SAFETY - PART 7: FINE TOLERANCE HOIST CHAIN, GRADE T (TYPES T, DAT AND DT)
BS EN 14140:2014 LPG equipment and accessories. Transportable refillable welded steel cylinders for LPG. Alternative design and construction
ISO 12732:2006 Corrosion of metals and alloys Electrochemical potentiokinetic reactivation measurement using the double loop method (based on Cihal's method)
BS EN 10218-1:2012 Steel wire and wire products. General Test methods
BS EN 764-4:2014 Pressure equipment Establishment of technical delivery conditions for metallic materials
BS EN 10083-1:2006 Steels for quenching and tempering General technical delivery conditions
BS EN 818-2 : 1997 SHORT LINK CHAIN FOR LIFTING PURPOSES - SAFETY - PART 2: MEDIUM TOLERANCE CHAIN FOR CHAIN SLINGS - GRADE 8
BS EN ISO 683-17:2014 Heat-treated steels, alloy steels and free-cutting steels Ball and roller bearing steels
BS EN 1677-5 : 2001 COMPONENTS FOR SLINGS - SAFETY - PART 5: FORGED STEEL LIFTING HOOKS WITH LATCH - GRADE 4
ISO 683-17:2014 Heat-treated steels, alloy steels and free-cutting steels — Part 17: Ball and roller bearing steels
BS EN 15049:2007 Railway applications. Suspension components. Torsion bar, steel
BS EN 1677-4 : 2000 COMPONENTS FOR SLINGS - SAFETY - PART 4: LINKS, GRADE 8
UNE-EN 10216-3:2014 Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 3: Alloy fine grain steel tubes
BS EN 1442 : 2006 LPG EQUIPMENT AND ACCESSORIES - TRANSPORTABLE REFILLABLE WELDED STEEL CYLINDERS FOR LPG - DESIGN AND CONSTRUCTION
UNE-EN ISO 683-17:2015 Heat-treated steels, alloy steels and free-cutting steels - Part 17: Ball and roller bearing steels (ISO 683-17:2014)
UNE-EN 10149-1:2014 Hot rolled flat products made of high yield strength steels for cold forming - Part 1: General technical delivery conditions
BS EN 10028-7:2007 Flat products made of steels for pressure purposes Stainless steels
BS EN 14330:2003 Inland navigation vessels. Studless anchor chain. Round steel link chain
UNE-EN 10216-5:2014 Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 5: Stainless steel tubes
UNE-EN 10218-1:2012 Steel wire and wire products - General - Part 1: Test methods
BS EN 10149-1:2013 Hot rolled flat products made of high yield strength steels for cold forming General technical delivery conditions
EN 1442:2017 LPG equipment and accessories - Transportable refillable welded steel cylinders for LPG - Design and construction
EN 4800-003:2010 Aerospace series - Titanium and titanium alloys - Technical specification - Part 003: Tube
EN 4721 : 2014 Aerospace series - Steel X4CrNiMo16-5-1 (1.4418) - Air melted and electroslag remelted (ESR) - Hardened and tempered - Bar - De ≤ 200 mm - 900 MPa ≤ Rm ≤ 1 050 MPa
EN 4800-002:2010 Aerospace series - Titanium and titanium alloys - Technical specification - Part 002: Bar and section
EN ISO 683-17:2014 Heat-treated steels, alloy steels and free-cutting steels - Part 17: Ball and roller bearing steels (ISO 683-17:2014)
EN 1677-5:2001+A1:2008 Components for slings - Safety - Part 5: Forged steel lifting hooks with latch - Grade 4
EN 4800-001:2010 Aerospace series - Titanium and titanium alloys - Technical specification - Part 001: Plate, sheet and strip
EN ISO 12732:2008 Corrosion of metals and alloys - Electrochemical potentiokinetic reactivation measurement using the double loop method (based on Cihal's method) (ISO 12732:2006)
EN 4631:2013 Aerospace series - Steel X4CrNiMo16-5-1 (1.4418) - Air melted - Hardened and tempered - Bar - De ≤ 200 mm - 900 MPa ≤ Rm ≤ 1 050 MPa
EN 15049:2007 Railway applications - Suspension components - Torsion bar, steel
EN 1677-6:2001+A1:2008 Components for slings - Safety - Part 6: Links - Grade 4
EN 13889:2003+A1:2008 Forged steel shackles for general lifting purposes - Dee shackles and bow shackles - Grade 6 - Safety
EN 4700-003:2010 Aerospace series - Steel and heat resisting alloys - Wrought products - Technical specification - Part 003: Tube
UNI EN 10277-1 : 2008 BRIGHT STEEL PRODUCTS - TECHNICAL DELIVERY CONDITIONS - PART 1: GENERAL
EN 818-3:1999+A1:2008 Short link chain for lifting purposes - Safety - Part 3: Medium tolerance chain for chain slings - Grade 4
EN 2030:2013 Aerospace series - Steel X105CrMo17 (1.3544) - Hardened and tempered - Bars - De ≤ 150 mm
EN 818-7:2002+A1:2008 Short link chain for lifting purposes - Safety - Part 7: Fine tolerance hoist chain, Grade T (Types T, DAT and DT)
EN 4500-004:2012 Aerospace series - Metallic materials - Rules for drafting and presentation of material standards - Part 004: Specific rules for titanium and titanium alloys
EN 4500-003:2012 Aerospace series - Metallic materials - Rules for drafting and presentation of material standards - Part 003: Specific rules for heat resisting alloys
EN 818-2:1996+A1:2008 Short link chain for lifting purposes - Safety - Part 2: Medium tolerance chain for chain slings - Grade 8
EN ISO 3266:2010/A1:2015 FORGED STEEL EYEBOLTS GRADE 4 FOR GENERAL LIFTING PURPOSES (ISO 3266:2010+A1:2015)
EN 4629:2013 Aerospace series - Steel X4CrNiMo16-5-1 (1.4418) - Air melted - Softened - Forging stock - De ≤ 300 mm
EN 4627:2014 Aerospace series - Steel X4CrNiMo16-5-1 (1.4418) - Air melted - Hardened and tempered - Forgings - De ≤ 200 mm - 1 150 MPa ≤ Rm ≤ 1 300 MPa
EN 4800-004:2010 Aerospace series - Titanium and titanium alloys - Technical specification - Part 004: Wire
EN 14140:2014/AC:2015 LPG EQUIPMENT AND ACCESSORIES - TRANSPORTABLE REFILLABLE WELDED STEEL CYLINDERS FOR LPG - ALTERNATIVE DESIGN AND CONSTRUCTION
EN 1677-4:2000+A1:2008 Components for slings - Safety - Part 4: Links, Grade 8
EN 4630:2014 Aerospace series - Steel X4CrNiMo16-5-1 (1.4418) - Air melted - Hardened and tempered - Forgings - De ≤ 200 mm - 900 MPa ≤ Rm ≤ 1 050 MPa
EN 15566:2016 Railway applications - Railway rolling stock - Draw gear and screw coupling
EN 4800-006:2010 Aerospace series - Titanium and titanium alloys - Technical specification - Part 006: Pre-production and production forgings
EN 4800-005:2010 Aerospace series - Titanium and titanium alloys - Technical specification - Part 005: Forging stock
EN 4700-004:2010 Aerospace series - Steel and heat resisting alloys - Wrought products - Technical specification - Part 004: Wire
EN 4700-001:2010 Aerospace series - Steel and heat resisting alloys - Wrought products - Technical specification - Part 001: Plate, sheet and strip
EN 1677-1:2000+A1:2008 Components for slings - Safety - Part 1: Forged steel components, Grade 8
EN 14330:2003 Inland navigation vessels - Studless anchor chain - Round steel link chain
EN 764-4:2014 Pressure equipment - Part 4: Establishment of technical delivery conditions for metallic materials
UNE-EN 10343:2010 Steels for quenching and tempering for construction purposes - Technical delivery conditions
BS EN 4700-001:2010 Aerospace series. Steel and heat resisting alloys. Wrought products. Technical specification Plate, sheet and strip
I.S. EN 4630:2014 AEROSPACE SERIES - STEEL X4CRNIMO16-5-1 (1.4418) - AIR MELTED - HARDENED AND TEMPERED - FORGINGS - D[E] <= 200 MM - 900 MPA <= R[M] <= 1050 MPA
06/30099300 DC : DRAFT JUN 2006 BS ISO 5832-1 - IMPLANTS FOR SURGERY - METALLIC MATERIALS - PART 1: WROUGHT STAINLESS STEEL
PREN 10263-1 : DRAFT 2014 STEEL ROD, BARS AND WIRE FOR COLD HEADING AND COLD EXTRUSION - PART 1: GENERAL TECHNICAL DELIVERY CONDITIONS
02/704957 DC : DRAFT NOV 2002 ISO 683-14 - HEAT-TREATABLE STEELS, ALLOY STEELS AND FREE-CUTTING STEELS - PART 14: HOT-ROLLED STEELS FOR QUENCHED AND TEMPERED SPRINGS
UNE-EN 15566:2017 Railway applications - Railway rolling stock - Draw gear and screw coupling
14/30284697 DC : 0 BS ISO 683-5 - HEAT TREATABLE STEELS, ALLOY STEELS AND FREE-CUTTING STEELS - PART 5: NITRIDING STEELS
17/30341500 DC : 0 BS EN ISO 5832-2 - IMPLANTS FOR SURGERY - METALLIC MATERIALS - PART 2: UNALLOYED TITANIUM
14/30312170 DC : 0 BS EN 10028-3 - FLAT PRODUCTS MADE OF STEELS FOR PRESSURE PURPOSES - PART 3: WELDABLE FINE GRAIN STEELS, NORMALIZED
EN ISO 11960:2014 PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL PIPES FOR USE AS CASING OR TUBING FOR WELLS (ISO 11960:2014)
11/30197571 DC : 0 BS ISO 25832-1 - IMPLANTS FOR SURGERY - SEAMLESS TUBES FOR SURGICAL IMPLANTS - PART 1: MATERIALS BASED ON IRON
ISO 630-4:2012 Structural steels Part 4: Technical delivery conditions for high-yield-strength quenched and tempered structural steel plates
I.S. EN 4700-003:2010 AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 003: TUBE
08/30187558 DC : 0 BS EN 10028-3 - FLAT PRODUCTS MADE OF STEELS FOR PRESSURE PURPOSES - PART 3: WELDABLE FINE GRAIN STEELS, NORMALIZED
04/30008013 DC : 0 BS ISO 3266 - EYEBOLTS GRADE 4 FOR GENERAL LIFTING PURPOSES
ISO 683-14:2004 Heat-treatable steels, alloy steels and free-cutting steels — Part 14: Hot-rolled steels for quenched and tempered springs
11/30239485 DC : 0 BS EN 10025-5 - HOT ROLLED PRODUCTS OF STRUCTURAL STEELS - PART 5: TECHNICAL DELIVERY CONDITIONS FOR STRUCTURAL STEELS WITH IMPROVED ATMOSPHERIC CORROSION RESISTANCE
I.S. EN 4800-003:2010 AEROSPACE SERIES - TITANIUM AND TITANIUM ALLOYS - TECHNICAL SPECIFICATION - PART 003: TUBE
15/30280630 DC : 0 BS EN ISO 4885 - FERROUS PRODUCTS - HEAT TREATMENTS - VOCABULARY
DIN ISO 5832-14:2009-12 IMPLANTS FOR SURGERY - METALLIC MATERIALS - PART 14: WROUGHT TITANIUM 15-MOLYBDENUM 5-ZIRCONIUM 3-ALUMINIUM ALLOY
06/30138405 DC : DRAFT JUN 2006 ISO 8539 - FORGED STEEL COMPONENTS FOR LIFTING SLINGS - GRADE 8
BS ISO 6336-5:2016 Calculation of load capacity of spur and helical gears Strength and quality of materials
NFS 94 051 : 2000 IMPLANTS FOR SURGERY - METALLIC MATERIALS - WROUGHT STAINLESS STEEL
BS EN 13001-3-5:2016 Cranes. General design Limit states and proof of competence of forged hooks
UNI EN 4629 : 2013 AEROSPACE SERIES - STEEL X4CRNIMO16-5-1 (1.4418) - AIR MELTED - SOFTENED - FORGING STOCK - D[E] <= 300 MM
BS 7252-8:1990 Metallic materials for surgical implants Specification for wrought cobalt-nickel-chromium-molybdenum-tungsten-iron alloy
BS ISO 5832-9:2007 Implants for surgery. Metallic materials Wrought high nitrogen stainless steel
03/313799 DC : DRAFT AUG 2003 ISO 11960 - PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL PIPES FOR USE AS CASING OR TUBING FOR WELLS
BS EN ISO 12732:2008 Corrosion of metals and alloys. Electrochemical potentiokinetic reactivation measurement using the double loop method (based on Cihal\'s method)
DIN EN 10025-5:2011-04 (Draft) HOT ROLLED PRODUCTS OF STRUCTURAL STEELS - PART 5: TECHNICAL DELIVERY CONDITIONS FOR STRUCTURAL STEELS WITH IMPROVED ATMOSPHERIC CORROSION RESISTANCE
05/30132598 DC : DRAFT APR 2005 EN 10083-2 - STEELS FOR QUENCHING AND TEMPERING - PART 2: TECHNICAL DELIVERY CONDITIONS FOR NON ALLOYS STEELS
BS EN 4629:2013 Aerospace series. Steel X4CrNiMo16-5-1 (1.4418). Air melted. Softened. Forging stock. De ≤ 300 mm
03/314809 DC : DRAFT SEP 2003 EN ISO 13680 - PETROLEUM AND NATURAL GAS INDUSTRIES - CORROSION-RESISTANT ALLOY SEAMLESS TUBES FOR USE AS CASING, TUBING AND COUPLING STOCK - TECHNICAL DELIVERY CONDITIONS
I.S. EN 4700-002:2016 AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 002: BAR AND SECTION
ISO 630-3:2012 Structural steels Part 3: Technical delivery conditions for fine-grain structural steels
PREN 10219-2 : DRAFT 2016 COLD FORMED WELDED STRUCTURAL STEEL HOLLOW SECTIONS - PART 2: TECHNICAL DELIVERY CONDITIONS
CSA ISO 5832-5 : 0 IMPLANTS FOR SURGERY - METALLIC MATERIALS - PART 5: WROUGHT COBALT-CHROMIUM-TUNGSTEN-NICKEL ALLOY
DIN EN ISO 12732:2008-07 CORROSION OF METALS AND ALLOYS - ELECTROCHEMICAL POTENTIOKINETIC REACTIVATION MEASUREMENT USING THE DOUBLE LOOP METHOD (BASED ON CIHAL'S METHOD)
ISO 2604-1:1975 Steel products for pressure purposes Quality requirements Part 1: Forgings
PREN 10025-1 : DRAFT 2011 HOT ROLLED PRODUCTS OF STRUCTURAL STEELS - PART 1: GENERAL TECHNICAL DELIVERY CONDITIONS
PREN 4700-002 : 200P3 AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 002: BAR AND SECTION
PREN 4500-003 : 200P2 AEROSPACE SERIES - METALLIC MATERIALS - RULES FOR DRAFTING AND PRESENTATION OF MATERIAL STANDARDS - PART 003: SPECIFIC RULES FOR HEAT RESISTING SLLOYS
UNI EN 4800-002 : 2011 AEROSPACE SERIES - TITANIUM AND TITANIUM ALLOYS - TECHNICAL SPECIFICATION - PART 002: BAR AND SECTION
ISO 9328-6:2018 Steel flat products for pressure purposes — Technical delivery conditions — Part 6: Weldable fine grain steels, quenched and tempered
ISO 683-4:2016 Heat-treatable steels, alloy steels and free-cutting steels Part 4: Free-cutting steels
I.S. EN 4800-001:2010 AEROSPACE SERIES - TITANIUM AND TITANIUM ALLOYS - TECHNICAL SPECIFICATION - PART 001: PLATE, SHEET AND STRIP
I.S. EN 10343:2009 STEELS FOR QUENCHING AND TEMPERING FOR CONSTRUCTION PURPOSES - TECHNICAL DELIVERY CONDITIONS
BS EN 10263-1:2017 Steel rod, bars and wire for cold heading and cold extrusion General technical delivery conditions
I.S. EN 4631:2013 AEROSPACE SERIES - STEEL X4CRNIMO16-5-1 (1.4418) - AIR MELTED - HARDENED AND TEMPERED - BAR - D[E] <= 200 MM - 900 MPA <= R[M] <= 1050 MPA
DIN EN ISO 4885:2015-09 (Draft) FERROUS MATERIALS - HEAT TREATMENTS - VOCABULARY (ISO 4885:2017)
I.S. EN 4700-004:2010 AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 004: WIRE
EN 10025-5:2004 Hot rolled products of structural steels - Part 5: Technical delivery conditions for structural steels with improved atmospheric corrosion resistance
ISO 22034-1:2007 Steel wire and wire products — Part 1: General test methods
BS EN ISO 4885:2017 Ferrous materials. Heat treatments. Vocabulary
17/30353548 DC : 0 BS EN 10277 - BRIGHT STEEL PRODUCTS - TECHNICAL DELIVERY CONDITIONS
GOST R EN 818-2 : 2005 SHORT LINK STEEL CHAINS FOR LIFTING PURPOSES - SAFETY - PART 2: MEDIUM TOLERANCE STEEL CHAINS FOR GRADE 8 CHAIN SLINGS
16/30332614 DC : 0 BS EN 10219-2 - COLD FORMED WELDED STRUCTURAL STEEL HOLLOW SECTIONS - PART 2: TECHNICAL DELIVERY CONDITIONS
PREN 10149-1 : DRAFT 2011 HOT ROLLED FLAT PRODUCTS MADE OF HIGH YIELD STRENGTH STEELS FOR COLD FORMING - PART 1: GENERAL DELIVERY CONDITIONS
CSA ISO 5832-6 : 0 IMPLANTS FOR SURGERY - METALLIC MATERIALS - PART 6: WROUGHT COBALT-NICKEL-CHROMIUM-MOLYBDENUM ALLOY
UNE-EN 14917:2011 Metal bellows expansion joints for pressure applications
ISO 9328-3:2018 Steel flat products for pressure purposes — Technical delivery conditions — Part 3: Weldable fine grain steels, normalized
KTA 3201.3 : 2007(R2012) COMPONENTS OF THE REACTOR COOLANT PRESSURE BOUNDARY OF LIGHT WATER REACTORS - PART 3: MANUFACTURE
EN 10083-3:2006/AC:2008 STEELS FOR QUENCHING AND TEMPERING - PART 3: TECHNICAL DELIVERY CONDITIONS FOR ALLOY STEELS
ISO 683-15:1992 Heat-treatable steels, alloy steels and free-cutting steels — Part 15: Valve steels for internal combustion engines
I.S. EN ISO 945-1:2018 MICROSTRUCTURE OF CAST IRONS - PART 1: GRAPHITE CLASSIFICATION BY VISUAL ANALYSIS (ISO 945-1:2017)
I.S. EN 10083-3:2006 STEELS FOR QUENCHING AND TEMPERING - PART 3: TECHNICAL DELIVERY CONDITIONS FOR ALLOY STEELS
DIN EN 764-4:2015-03 PRESSURE EQUIPMENT - PART 4: ESTABLISHMENT OF TECHNICAL DELIVERY CONDITIONS FOR METALLIC MATERIALS
DIN EN 10025-1:2011-04 (Draft) Hot rolled products of structural steels - Part 1: General technical delivery conditions; German version prEN 10025-1:2011
DIN EN 14330 E : 2004 INLAND NAVIGATION VESSELS - STUDLESS ANCHOR CHAIN - ROUND STEEL LINK CHAIN
DIN EN 10083-1 E : 2006 STEELS FOR QUENCHING AND TEMPERING - PART 1: GENERAL TECHNICAL DELIVERY CONDITIONS
UNE-EN 10028-3:2017 Flat products made of steels for pressure purposes - Part 3: Weldable fine grain steels, normalized
BS EN 10210-1:2006 Hot finished structural hollow sections of non-alloy and fine grain steels Technical delivery requirements
BS EN 10219-1:2006 Cold formed welded structural hollow sections of non-alloy and fine grain steels Technical delivery requirements
BS EN 1677-6 : 2001 COMPONENTS FOR SLINGS - SAFETY - PART 6: LINKS - GRADE 4
BS EN 10277-1:2008 Bright steel products. Technical delivery conditions General
EN 10084:2008 Case hardening steels - Technical delivery conditions
EN 10343:2009 Steels for quenching and tempering for construction purposes - Technical delivery conditions
BS 7252-7:1994 Metallic materials for surgical implants Specification for cobalt-chromium-nickel-molybdenum-iron alloy
DIN EN 10219-1:2006-07 Cold formed welded structural hollow sections of non-alloy and fine grain steels - Part 1: Technical delivery conditions
EN 10216-3:2013 Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 3: Alloy fine grain steel tubes
DIN EN ISO 945-1:2010-09 MICROSTRUCTURE OF CAST IRONS - PART 1: GRAPHITE CLASSIFICATION BY VISUAL ANALYSIS
DIN EN 14140:2017-01 LPG EQUIPMENT AND ACCESSORIES - TRANSPORTABLE REFILLABLE WELDED STEEL CYLINDERS FOR LPG - ALTERNATIVE DESIGN AND CONSTRUCTION
BS 4490:1989 Methods for micrographic determination of the grain size of steel
ONORM EN ISO 683-17 : 2015 HEAT-TREATED STEELS, ALLOY STEELS AND FREE-CUTTING STEELS - PART 17: BALL AND ROLLER BEARING STEELS (ISO 683-17:2014)

ISO 3785:2006 Metallic materials — Designation of test specimen axes in relation to product texture
ISO 14250:2000 Steel — Metallographic characterization of duplex grain size and distributions

View more information
$118.72
Including GST where applicable

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.

Need help?
Call us on 131 242, then click here to start a Screen Sharing session
so we can help right away! Learn more