ISO 898-1:2013
Current
The latest, up-to-date edition.
Mechanical properties of fasteners made of carbon steel and alloy steel — Part 1: Bolts, screws and studs with specified property classes — Coarse thread and fine pitch thread
Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users
14-01-2013
ISO 898-1:2013 specifies mechanical and physical properties of bolts, screws and studs made of carbon steel and alloy steel when tested at an ambient temperature range of 10 °C to 35 °C. Fasteners (the term used when bolts, screws and studs are considered all together) that conform to the requirements of ISO 898-1:2013 are evaluated at that ambient temperature range. They might not retain the specified mechanical and physical properties at elevated temperatures (see Annex B) and/or lower temperatures.
Certain bolts and screws might not fulfil the tensile or torsional requirements of ISO 898-1:2013 because the geometry of their heads reduces the shear area in the head compared to the stress area in the thread. These include bolts and screws having a low or countersunk head.
ISO 898-1:2013 is applicable to bolts, screws and studs
- made of carbon steel or alloy steel,
- having triangular ISO metric screw thread in accordance with ISO 68-1,
- with coarse pitch thread M1,6 to M39, and fine pitch thread M8×1 to M39×3,
- with diameter/pitch combinations in accordance with ISO 261 and ISO 262, and
- having thread tolerances in accordance with ISO 965-1, ISO 965-2 and ISO 965-4.
It is not applicable to set screws and similar threaded fasteners not under tensile stress (see ISO 898-5).
It does not specify requirements for such properties as weldability, corrosion resistance resistance to shear stress, torque/clamp force performance (for test method, see ISO 16047), or fatigue resistance.
| Committee |
ISO/TC 2/SC 11
|
| DevelopmentNote |
Supersedes ISO 898-3 (04/2001) Supersedes ISO/DIS 898-1 and SAE J 121M. (01/2013) Corrigendum 1 applies to French version only. (04/2013)
|
| DocumentType |
Standard
|
| Pages |
57
|
| PublisherName |
International Organization for Standardization
|
| Status |
Current
|
| Supersedes |
| Standards | Relationship |
| JIS B 1051:2014 | Identical |
| GOST R ISO 898-1 : 2011 | Identical |
| NBN EN ISO 898-1 : 2013 | Identical |
| NEN EN ISO 898-1 : 2013 | Identical |
| NS EN ISO 898-1 : 2013 AC 2013 | Identical |
| I.S. EN ISO 898-1:2013 | Identical |
| AS 4291.1:2015 | Identical |
| PN EN ISO 898-1 : 2013 | Identical |
| SS-EN ISO 898-1:2013 | Identical |
| BS EN ISO 898-1:2013 | Identical |
| EN ISO 898-1:2013 | Identical |
| NF EN ISO 898-1 : 2013 | Identical |
| DIN EN ISO 898-1:2013-05 | Identical |
| UNE-EN ISO 898-1:2015 | Identical |
| NBN E 27 072 : 1987 | Identical |
| EN 20898-1 : 1991 | Identical |
| UNE 17721:1981 | Identical |
| DIN ISO 898-1:1989-01 | Similar to |
| I.S. EN 20898-1:1991 | Identical |
| NBN E 27 071 : 1987 | Identical |
| NBN E 51 006 : 1989 | Identical |
| SAC GB/T 3098.1 : 2010 | Identical |
| IS 1367 : Part 3 : 2017 | Identical |
| UNE-EN 20898-1:1992 | Identical |
| NBN E 51 003 : 1988 | Identical |
| DIN EN 20898-1:1992-04 | Corresponds |
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.