Customer Support: 131 242

  • There are no items in your cart
We noticed you’re not on the correct regional site. Switch to our AMERICAS site for the best experience.
Dismiss alert

ISO 9001:2015

Current

Current

The latest, up-to-date edition.

Quality management systems — Requirements

Available format(s)

Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users

Language(s)

English, French, Russian, Spanish, Castilian

Published date

22-09-2015

ISO 9001:2015 specifies requirements for a quality management system when an organization:

a) needs to demonstrate its ability to consistently provide products and services that meet customer and applicable statutory and regulatory requirements, and

b) aims to enhance customer satisfaction through the effective application of the system, including processes for improvement of the system and the assurance of conformity to customer and applicable statutory and regulatory requirements.

All the requirements of ISO 9001:2015 are generic and are intended to be applicable to any organization, regardless of its type or size, or the products and services it provides.

Committee
ISO/TC 176/SC 2
DevelopmentNote
Supersedes ISO 9002 and ISO 9003 (04/2004) Supersedes ISO/FDIS 9001. (09/2015)
DocumentType
Standard
Pages
29
ProductNote
This standard also consider corrected version for FR for the year 2015-09
PublisherName
International Organization for Standardization
Status
Current
Supersedes

EN 14423:2013+A1:2016 Clamp type coupling assemblies for use with steam hoses rated for pressures up to 18 bar
I.S. EN 50126-2:2017 RAILWAY APPLICATIONS - THE SPECIFICATION AND DEMONSTRATION OF RELIABILITY, AVAILABILITY, MAINTAINABILITY AND SAFETY (RAMS) - PART 2: SYSTEMS APPROACH TO SAFETY
BS EN 61400-3:2009 Wind turbines Design requirements for offshore wind turbines
13/30280703 DC : 0 BS EN 1329-1 - PLASTICS PIPING SYSTEMS FOR SOIL AND WASTE DISCHARGE (LOW AND HIGH TEMPERATURE) WITHIN THE BUILDING STRUCTURE - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) - PART 1: SPECIFICATIONS FOR PIPES, FITTINGS AND THE SYSTEM
15/30293072 DC : 0 BS EN ISO 6789-1 - ASSEMBLY TOOLS FOR SCREWS AND NUTS - HAND TORQUE TOOLS - PART 1: REQUIREMENTS AND METHOD FOR DESIGN CONFORMANCE TESTING, QUALITY CONFORMANCE TESTING AND CALIBRATION PROCEDURE
I.S. EN ISO 19011:2011 GUIDELINES FOR AUDITING MANAGEMENT SYSTEMS (ISO 19011:2011)
DIN EN 15313:2016-09 RAILWAY APPLICATIONS - IN-SERVICE WHEELSET OPERATION REQUIREMENTS - IN-SERVICE AND OFF-VEHICLE WHEELSET MAINTENANCE
BS EN 61513:2013 Nuclear power plants. Instrumentation and control important to safety. General requirements for systems
S.R. CEN/TS 12666-2:2012 PLASTICS PIPING SYSTEMS FOR NON-PRESSURE UNDERGROUND DRAINAGE AND SEWERAGE - POLYETHYLENE (PE) - PART 2: GUIDANCE FOR THE ASSESSMENT OF CONFORMITY
ISO 4642-1:2015 Rubber and plastics hoses, non-collapsible, for fire-fighting service Part 1: Semi-rigid hoses for fixed systems
PREN 13658-2 : DRAFT 2017 METAL LATH AND BEADS - DEFINITIONS, REQUIREMENTS AND TEST METHODS - PART 2: EXTERNAL RENDERING
15/30321131 DC : 0 BS EN ISO 13485 - MEDICAL DEVICES - QUALITY MANAGEMENT SYSTEMS - REQUIREMENTS FOR REGULATORY PURPOSES
14/30312130 DC : 0 BS EN 13479 - WELDING CONSUMABLES - GENERAL PRODUCT STANDARD FOR FILLER METALS AND FLUXES FOR FUSION WELDING OF METALLIC MATERIALS
I.S. EN ISO/IEC 80079-34:2011 EXPLOSIVE ATMOSPHERES - PART 34: APPLICATION OF QUALITY SYSTEMS FOR EQUIPMENT MANUFACTURE
PREN 13361 : DRAFT 2016 GEOSYNTHETIC BARRIERS - CHARACTERISTICS REQUIRED FOR USE IN THE CONSTRUCTION OF RESERVOIRS AND DAMS
07/30174185 DC : 0 BS EN ISO 1461 - HOT DIP GALVANIZED COATINGS ON FABRICATED IRON AND STEEL ARTICLES - SPECIFICATIONS AND TEST METHODS
API Q2 PORTUGUESE : 2011 SPECIFICATION FOR QUALITY MANAGEMENT SYSTEM REQUIREMENTS FOR SERVICE SUPPLY ORGANIZATIONS FOR THE PETROLEUM AND NATURAL GAS INDUSTRIES
07/30169818 DC : 0 BS EN 1013 - LIGHT TRANSMITTING SINGLE SKIN PROFILED PLASTICS SHEETS FOR INTERNAL AND EXTERNAL ROOFS, WALLS AND CEILINGS - REQUIREMENTS AND TEST METHODS
NFPA 1999 : 2018 PROTECTIVE CLOTHING AND ENSEMBLES FOR EMERGENCY MEDICAL OPERATIONS
NFPA 1855 : 2018 SELECTION, CARE, AND MAINTENANCE OF PROTECTIVE ENSEMBLES FOR TECHNICAL RESCUE INCIDENTS
CSA Z15882 : 2009 : R2014 STERILIZATION OF HEALTH CARE PRODUCTS - CHEMICAL INDICATORS - GUIDANCE FOR SELECTION, USE AND INTERPRETATION OF RESULTS
I.S. EN 50129:2003 RAILWAY APPLICATIONS - COMMUNICATION, SIGNALLING AND PROCESSING SYSTEMS - SAFETY RELATED ELECTRONIC SYSTEMS FOR SIGNALLING
DIN EN ISO 13127:2013-03 Packaging - Child resistant packaging - Mechanical test methods for reclosable child resistant packaging systems (ISO 13127:2012 + Cor. 1:2012) (includes Corrigendum :2012)
14/30301257 DC : 0 BS EN 13160-3 - LEAK DETECTION SYSTEMS - PART 3: REQUIREMENTS AND TEST/ASSESSMENT METHODS FOR LIQUID SYSTEMS FOR TANKS
07/30166070 DC : 0 BS EN 13230-4 - RAILWAY APPLICATIONS - TRACK - CONCRETE SLEEPERS AND BEARERS - PART 4: PRESTRESSED BEARERS FOR SWITCHES AND CROSSINGS
PD CEN/TR 14585-2:2006 Corrugated metal hose assemblies for pressure applications Guidance on the use of conformity assessment procedures
12/30270456 DC : 0 BS ISO 18091 - QUALITY MANAGEMENT SYSTEMS - GUIDELINES FOR THE APPLICATION OF ISO 9001:2008 IN LOCAL GOVERNMENT
S.R. CEN/TR 15419:2017 PROTECTIVE CLOTHING - GUIDELINES FOR SELECTION, USE, CARE AND MAINTENANCE OF CHEMICAL PROTECTIVE CLOTHING
DIN ISO 37500 E : 2015 GUIDANCE ON OUTSOURCING (ISO 37500:2014)
03/306636 DC : DRAFT APR 2003 EN 13674-3 - RAILWAY APPLICATIONS - TRACK - RAIL - PART 3: CHECK RAILS
99/709740 DC : DRAFT JUN 99 PREN 10253-2 - BUTT WELDING PIPE FITTINGS - PART 2: WROUGHT CARBON AND FERRITIC ALLOY STEELS WITH SPECIFIC INSPECTION REQUIREMENTS
UNE-EN 15317:2014 Non-destructive testing - Ultrasonic testing - Characterization and verification of ultrasonic thickness measuring equipment
PD CEN/TS 13476-4:2013 Plastics piping systems for non-pressure underground drainage and sewerage. Structured-wall piping systems of unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) Guidance for the assessment of conformity
12/30265310 DC : 0 BS EN 124-5 - GULLY TOPS AND MANHOLE TOPS FOR VEHICULAR AND PEDESTRIAN AREAS - PART 5: GULLY TOPS AND MANHOLE TOPS MADE FROM COMPOSITE MATERIALS
UNE-ISO 37001:2017 Anti-bribery management systems. Requirements with guidance for use.
UNE-EN 14811:2007 Railway applications - Track - Special purpose rail - Grooved and associated construction
UNE-EN 10088-5:2010 Stainless steels - Part 5: Technical delivery conditions for bars, rods, wire, sections and bright products of corrosion resisting steels for construction purposes
UNE-EN 10343:2010 Steels for quenching and tempering for construction purposes - Technical delivery conditions
ISO 8255-2:2013 Microscopes — Cover glasses — Part 2: Quality of materials, standards of finish and mode of packaging
DIN EN 14545 E : 2009 TIMBER STRUCTURES - CONNECTORS - REQUIREMENTS
10/30197201 DC : 0 BS EN ISO 14006 - ENVIRONMENTAL MANAGEMENT SYSTEMS - GUIDELINES FOR INCORPORATING ECODESIGN
12/30265292 DC : 0 BS EN 12050-2 - WASTEWATER LIFTING PLANTS FOR BUILDINGS AND SITES - PRINCIPLES OF CONSTRUCTION AND TESTING - PART 2: LIFTING PLANTS FOR FAECAL-FREE WASTEWATER
BS EN 15224:2016 Quality management systems. EN ISO 9001:2015 for healthcare
DIN EN ISO 11135-1:2007-08 STERILIZATION OF HEALTH CARE PRODUCTS - ETHYLENE OXIDE - PART 1: REQUIREMENTS FOR THE DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES
ISO 4642-2:2015 Rubber and plastics hoses, non-collapsible, for fire-fighting service Part 2: Semi-rigid hoses (and hose assemblies) for pumps and vehicles
IEC TS 61850-2:2003 Communication networks and systems in substations - Part 2: Glossary
12/30259268 DC : 0 BS ISO 14186 - AIR CARGO - FIRE CONTAINMENT COVERS - DESIGN, PERFORMANCE AND TESTING REQUIREMENTS
AWS G1.6 : 2006 SPECIFICATION FOR THE QUALIFICATION OF PLASTICS WELDING INSPECTORS FOR HOT GAS, HOT GAS EXTRUSION, AND HEATED TOOL BUTT THERMOPLASTIC WELDS
ISO 20700:2017 Guidelines for management consultancy services
AQAP 169 : 1 NATO GUIDANCE ON THE USE OF AQAP 160 EDITION 1
DIN ISO/IEC 15504-3:2011-07 INFORMATION TECHNOLOGY - PROCESS ASSESSMENT - PART 3: GUIDANCE ON PERFORMING AN ASSESSMENT
ISO 11040-5:2012 Prefilled syringes — Part 5: Plunger stoppers for injectables
05/30128217 DC : DRAFT JAN 2005 ISO/DIS 23933 - AEROSPACE - ARAMID REINFORCED LIGHTWEIGHT POLYTETRAFLUOROETHYLENE (PTFE) HOSE ASSEMBLIES, CLASSIFICATION 135 DEGREE C/20 684 KPA (275 DEGREE F/3 000 PSI) AND 135 DEGREE C/21 000 KPA (275 DEGREE F/3 046 PSI) - PROCUREMENT SPECIFICATION
DIN EN ISO 22301 E : 2014 SOCIETAL SECURITY - BUSINESS CONTINUITY MANAGEMENT SYSTEMS - REQUIREMENTS (ISO 22301:2012)
DEFSTAN 05-95/2(1992) : 1992 QUALITY SYSTEM REQUIREMENTS FOR THE DEVELOPMENT, SUPPLY AND MAINTENANCE OF SOFTWARE
ISO 4118:2016 Air cargo Non-certified lower deck containers Design and testing
BS ISO 16063-22 : 2005 METHODS FOR THE CALIBRATION OF VIBRATION AND SHOCK TRANSDUCERS - PART 22: SHOCK CALIBRATION BY COMPARISON TO A REFERENCE TRANSDUCER
DIN EN 15682-2:2013-10 GLASS IN BUILDING - HEAT SOAKED THERMALLY TOUGHENED ALKALINE EARTH SILICATE SAFETY GLASS - PART 2: EVALUATION OF CONFORMITY/PRODUCT STANDARD
17/30279844 DC : 0 BS EN 17069-1 - RAILWAY APPLICATIONS - SYSTEMS AND PROCEDURES FOR CHANGE OF TRACK GAUGE - PART 1: AUTOMATIC VARIABLE GAUGE SYSTEMS
15/30322573 DC : 0 BS ISO/IEC 33071 - INFORMATION TECHNOLOGY - PROCESS ASSESSMENT - AN INTEGRATED PROCESS CAPABILITY ASSESSMENT MODEL FOR ENTERPRISE PROCESSES
16/30329419 DC : 0 BS EN 12566-1 - SMALL WASTEWATER TREATMENT SYSTEMS FOR UP TO 50 PT - PART 1: PREFABRICATED SEPTIC TANKS
PD CEN/TR 1317-6:2012 Road restraint systems Pedestrian restraint system. Pedestrian parapets
16/30325907 DC : 0 BS EN 15102 - DECORATIVE WALLCOVERINGS - ROLL FORM
I.S. EN 492:2012 Fibre-cement slates and fittings - Product specification and test methods
09/30176792 DC : 0 BS EN 61513 - NUCLEAR POWER PLANTS - INSTRUMENTATION AND CONTROL IMPORTANT TO SAFETY - GENERAL REQUIREMENTS FOR SYSTEMS
11/30247943 DC : 0 EN ISO/IEC 17065 - CONFORMITY ASSESSMENT - REQUIREMENTS FOR CERTIFICATION BODIES CERTIFYING PRODUCTS, PROCESSES AND SERVICES
UNE-EN 54-22:2016 Fire detection and fire alarm system - Part 22 : Resettable line-type heat detectors
BS ISO/IEC 19770-1:2017 Information technology. IT asset management IT asset management systems. Requirements
UNE-ISO 13053-1:2012 Quantitative methods in process improvement -- Six Sigma -- Part 1: DMAIC methodology
UNE-ISO/IEC TS 17021-3:2014 Conformity assessment -- Requirements for bodies providing audit and certification of management systems -- Part 3: Competence requirements for auditing and certification of quality management systems
DIN EN 15285:2008-09 Agglomerated stone - Modular tiles for flooring and stairs (internal and external)
03/108542 DC : DRAFT MAY 2003 BS EN ISO 11140-1 - STERILIZATION OF HEALTH CARE PRODUCTS - CHEMICAL INDICATORS - PART 1: GENERAL REQUIREMENTS
04/30118849 DC : DRAFT SEP 2004 EN 15013 - PLASTICS PIPING SYSTEMS - NON-PRESSURE DRAINAGE AND SEWERAGE SYSTEMS BURIED IN GROUND
BS ISO/IEC 15288:2002 Systems engineering. System life cycle processes
BS EN ISO 9004:2018 Quality management. Quality of an organization. Guidance to achieve sustained success
ISO/IEC 10967-2:2001 Information technology — Language independent arithmetic — Part 2: Elementary numerical functions
I.S. EN 61162-402:2005 MARITIME NAVIGATION AND RADIOCOMMUNICATION EQUIPMENT AND SYSTEMS - DIGITAL INTERFACES - PART 402: MULTIPLE TALKERS AND MULTIPLE LISTENERS - SHIP SYSTEMS INTERCONNECTION - DOCUMENTATION AND TEST REQUIREMENTS
11/30216823 DC : 0 BS ISO 17367 - SUPPLY CHAIN APPLICATIONS OF RFID - PRODUCT TAGGING
DIN V ENV 61400-1 : 1996 WIND TURBINE GENERATOR SYSTEMS - PART 1: SAFETY REQUIREMENTS
PD CEN/TS 16850:2015 Societal and Citizen Security. Guidance for managing security in healthcare facilities
17/30325421 DC : 0 BS ISO 25119-1 - TRACTORS AND MACHINERY FOR AGRICULTURE AND FORESTRY - SAFETY-RELATED PARTS OF CONTROL SYSTEMS - PART 1: GENERAL PRINCIPLES FOR DESIGN AND DEVELOPMENT
DIN EN ISO/IEC 19796-1:2009-08 INFORMATION TECHNOLOGY - LEARNING, EDUCATION AND TRAINING - QUALITY MANAGEMENT, ASSURANCE AND METRICS - PART 1: GENERAL APPROACH
DIN EN 16475-7 E : 2016 CHIMNEYS - ACCESSORIES - PART 7: RAIN CAPS - REQUIREMENTS AND TEST METHODS
UNI EN 1591-4 : 2013 FLANGES AND THEIR JOINTS - PART 4: QUALIFICATION OF PERSONNEL COMPETENCY IN THE ASSEMBLY OF THE BOLTED CONNECTIONS OF CRITICAL SERVICE PRESSURIZED SYSTEMS
14/30298043 DC : 0 BS EN 61069-8 ED 2.0 - INDUSTRIAL-PROCESS MEASUREMENT AND CONTROL - EVALUATION OF SYSTEM PROPERTIES FOR THE PURPOSE OF SYSTEM ASSESSMENT - PART 8: ASSESSMENT OF OTHER SYSTEM PROPERTIES
PD CEN/TR 15983:2010 Stationary source emissions. Guidance on the application of EN 14181:2004
17/30363625 DC : DRAFT SEP 2017 BS EN ISO 11138-7 - STERILIZATION OF HEALTH CARE PRODUCTS - BIOLOGICAL INDICATORS - PART 7: GUIDANCE FOR THE SELECTION, USE AND INTERPRETATION OF RESULTS
API 591 RUSSIAN : 2008 PROCESS VALVE QUALIFICATION PROCEDURE
BS EN 14509:2013 Self-supporting double skin metal faced insulating panels. Factory made products. Specifications
PD ISO/TR 27809:2007 Health informatics. Measures for ensuring patient safety of health software
BS IEC 61189-5-4 : 2015 TEST METHODS FOR ELECTRICAL MATERIALS, PRINTED BOARDS AND OTHER INTERCONNECTION STRUCTURES AND ASSEMBLIES - PART 5-4: GENERAL TEST METHODS FOR MATERIALS AND ASSEMBLIES - SOLDER ALLOYS AND FLUXED AND NON-FLUXED SOLID WIRE FOR PRINTED BOARD ASSEMBLIES
ISO 18601:2013 Packaging and the environment — General requirements for the use of ISO standards in the field of packaging and the environment
16/30353588 DC : 0 BS EN 61020-1 ED 3.0 - ELECTROMECHANICAL SWITCHES FOR USE IN ELECTRICAL AND ELECTRONIC EQUIPMENT - PART 1: GENERIC SPECIFICATION
PREN 13491 : DRAFT 2016 GEOSYNTHETIC BARRIERS - CHARACTERISTICS REQUIRED FOR USE AS A FLUID BARRIER IN THE CONSTRUCTION OF TUNNELS AND ASSOCIATED UNDERGROUND STRUCTURES
DIN EN 124-3:2015-09 GULLY TOPS AND MANHOLE TOPS FOR VEHICULAR AND PEDESTRIAN AREAS - PART 3: GULLY TOPS AND MANHOLE TOPS MADE OF STEEL OR ALUMINIUM ALLOYS
BS EN 60903:2003 Live working. Gloves of insulating material
14/30256684 DC : 0 BS EN ISO 17668 - ZINC DIFFUSION COATINGS ON FERROUS PRODUCTS - SHERARDIZING - SPECIFICATION
I.S. EN 16351:2015 TIMBER STRUCTURES - CROSS LAMINATED TIMBER - REQUIREMENTS
02/124462 DC : DRAFT DEC 2002 BS EN 285 - STERILIZATION - STEAM STERILIZERS - LARGE STERILIZERS
BS EN 61869-1:2009 Instrument transformers General requirements
ISO 18604:2013 Packaging and the environment — Material recycling
16/30258478 DC : 0 BS EN 13674-2 - RAILWAY APPLICATIONS - TRACK - RAIL - PART 2: SWITCH AND CROSSING RAILS USED IN CONJUNCTION WITH VIGNOLE RAILWAY RAILS 46 KG/M AND ABOVE
BS EN 14695:2010 Flexible sheets for waterproofing. Reinforced bitumen sheets for waterproofing of concrete bridge decks and other trafficked areas of concrete. Definitions and characteristics
DIN EN 1254-8:2012-12 Copper and copper alloys - Plumbing fittings - Part 8: Fittings with press ends for use with plastics and multilayer pipes
14/30311460 DC : 0 BS EN 14296 - SANITARY APPLIANCES - COMMUNAL WASHING TROUGHS
11/30250205 DC : 0 BS EN 6138 - AEROSPACE SERIES - CAP, PROTECTIVE, NON METALLIC FOR FITTING ENDS <= 3000 PSI HYDRAULIC SYSTEMS
DIN EN 15358 E : 2011 SOLID RECOVERED FUELS - QUALITY MANAGEMENT SYSTEMS - PARTICULAR REQUIREMENTS FOR THEIR APPLICATION TO THE PRODUCTION OF SOLID RECOVERED FUELS
CSA N285.0 : 2006 GENERAL REQUIREMENTS FOR PRESSURE-RETAINING SYSTEMS AND COMPONENTS IN CANDU NUCLEAR POWER PLANTS
UNI CEI CEN/TR 16469 : 2014 HYDROMETRY - MEASUREMENT OF THE RAINFALL INTENSITY (LIQUID PRECIPITATION): REQUIREMENTS, CALIBRATION METHODS AND FIELD MEASUREMENTS
03/306438 DC : DRAFT APR 2003 IEC 61133 ED. 2 - RAILWAY APPLICATIONS - ROLLING STOCK - TESTING OF ROLLING STOCK ON COMPLETION OF CONSTRUCTION AND BEFORE ENTRY INTO SERVICE
DIN EN 12764:2015-09 SANITARY APPLIANCES - SPECIFICATION FOR WHIRLPOOL BATHS
UNI CEN/TS 13476-4 : 2013 PLASTICS PIPING SYSTEMS FOR NON-PRESSURE UNDERGROUND DRAINAGE AND SEWERAGE - STRUCTURED-WALL PIPING SYSTEMS OF UNPLASTICIZED POLY(VINYLS CHLORIDE) (PVC-U), POLYPROPYLENE (PP) AND POLYETHYLENE (PE) - PART 4: GUIDANCE FOR THE ASSESSMENT OF CONFORMITY
11/30233259 DC : 0 BS EN 1790 - ROAD MARKING MATERIALS - PREFORMED ROAD MARKINGS
BS ISO/IEC/IEEE 15288:2015 Systems and software engineering. System life cycle processes
12/30266874 DC BS EN 1871. Road marking materials. Paint, thermoplastic and cold plastic materials. Specifications
I.S. EN 12271:2006 SURFACE DRESSING - REQUIREMENTS
I.S. EN 12079-1:2006 OFFSHORE CONTAINERS AND ASSOCIATED LIFTING SETS - PART 1: OFFSHORE CONTAINERS - DESIGN, MANUFACTURE AND MARKING
04/30089749 DC : DRAFT DEC 2004 BS EN 62304 - MEDICAL DEVICE SOFTWARE - SOFTWARE LIFE-CYCLE PROCESSES
17/30346842 DC : 0 BS ISO 10006 - QUALITY MANAGEMENT SYSTEMS - GUIDELINES FOR QUALITY MANAGEMENT IN PROJECTS
BS EN 54-28:2016 Fire detection and fire alarm system Non-resettable line-type heat detectors
16/30338114 DC : 0 BS EN 13361 - GEOSYNTHETIC BARRIERS - CHARACTERISTICS REQUIRED FOR USE IN THE CONSTRUCTION OF RESERVOIRS AND DAMS
14/30266573 DC : 0 BS EN 12368 - TRAFFIC CONTROL EQUIPMENT - SIGNAL HEADS
SAE AMS 3721 : 2017 TAPE FOR ORGANIC COATINGS ADHESION TESTING
I.S. EN 74-1:2005 COUPLERS, SPIGOT PINS AND BASEPLATES FOR USE IN FALSEWORK AND SCAFFOLDS - PART 1: COUPLERS FOR TUBES - REQUIREMENTS AND TEST PROCEDURES
17/30339707 DC : 0 BS ISO 21138-2 - PLASTICS PIPING SYSTEMS FOR NON-PRESSURE UNDERGROUND DRAINAGE AND SEWERAGE - STRUCTURED-WALL PIPING SYSTEMS OF UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U), POLYPROPYLENE (PP) AND POLYETHYLENE (PE) - PART 2: PIPES AND FITTINGS WITH SMOOTH EXTERNAL SURFACE, TYPE A
BS ISO 6517:2013 Air cargo. Certified lower deck containers. Design and testing
BS EN 15927:2010 Services offered by hearing aid professionals
15/30328952 DC : 0 BS EN ISO 10418 - PETROLEUM AND NATURAL GAS INDUSTRIES - OFFSHORE PRODUCTION INSTALLATIONS - PROCESS SAFETY SYSTEMS
DIN ISO/IEC 15504-4:2011-08 INFORMATION TECHNOLOGY - PROCESS ASSESSMENT - PART 4: GUIDANCE ON USE FOR PROCESS IMPROVEMENT AND PROCESS CAPABILITY DETERMINATION
BS IEC 61334-1.2 : 1997 DISTRIBUTION AUTOMATION USING DISTRIBUTION LINE CARRIER SYSTEMS - GENERAL CONSIDERATIONS - GUIDE FOR SPECIFICATION
15/30328787 DC : 0 BS EN 13265 - GEOTEXTILES AND GEOTEXTILE-RELATED PRODUCTS - CHARACTERISTICS REQUIRED FOR USE IN LIQUID WASTE CONTAINMENT PROJECTS
16/30323827 DC : 0 BS ISO 50007 - ACTIVITIES RELATING TO ENERGY SERVICES - GUIDELINES FOR THE ASSESSMENT AND IMPROVEMENT OF THE SERVICE TO USERS
BS EN 62138:2009 Nuclear power plants. Instrumentation and control important for safety. Software aspects for computer-based systems performing category B or C functions
I.S. EN ISO 13174:2012 CATHODIC PROTECTION OF HARBOUR INSTALLATIONS (ISO 13174:2012)
BS EN ISO 3691-6:2015 Industrial trucks. Safety requirements and verification Burden and personnel carriers
DIN EN 16855-1 E : 2017 WALK-IN COLD ROOMS - DEFINITION, THERMAL INSULATION PERFORMANCE AND TEST METHODS - PART 1: PREFABRICATED COLD ROOM KITS
BS ISO 10327:2014 Air cargo. Main deck containers. Design and testing
DIN ISO 29990:2010-12 Learning services for non-formal education and training - Basic requirements for service providers (ISO 29990:2010)
BS EN 45510-6-5:2000 Guide for the procurement of power station equipment. Turbine auxiliaries Dry cooling systems - Section 5: Dry cooling systems
09/30200834 DC : 0 BS EN 1559-1 - FOUNDING - TECHNICAL CONDITIONS OF DELIVERY - PART 1: GENERAL
10/30233182 DC : 0 BS EN 492 - FIBRE-CEMENT SLATES AND FITTINGS - PRODUCT SPECIFICATION AND TEST METHODS
DD ENV 1852-2:2001 Plastics piping systems for non-pressure underground drainage and sewerage. Polypropylene (PP) Guidance for the assessment of conformity
14/30255135 DC : 0 BS EN ISO 11607-1:2009/A1 - PACKAGING FOR TERMINALLY STERILIZED MEDICAL DEVICES - PART 1: REQUIREMENTS FOR MATERIALS, STERILE BARRIER SYSTEMS AND PACKAGING SYSTEMS
BS EN 14846:2008 Building hardware. Locks and latches. Electromechanically operated locks and striking plates. Requirements and test methods
02/103123 DC : DRAFT APR 2002 BS EN 14449 - GLASS IN BUILDING - LAMINATED GLASS AND LAMINATED SAFETY GLASS - EVALUATION OF CONFORMITY
DD ENV 50231:1997 Aeronautical ground lighting electrical installation. Constant current regulator. Equipment specifications and tests
PD CEN/TR 16478:2012 Surveillance from first commissioning on measuring devices used in natural gas supply to the installations of the activities under the Directive 2003/87/EC establishing a scheme of CO<sub>2</sub> emissions trading
PD ISO/TS 22163:2017 Railway applications. Quality management system. Business management system requirements for rail organizations: ISO 9001:2015 and particular requirements for application in the rail sector
12/30274796 DC : 0 BS IEC 61189-5-2 ED.1 - TEST METHODS FOR ELECTRICAL MATERIALS, INTERCONNECTION STRUCTURES AND ASSEMBLIES - PART 5-2: TEST METHODS FOR PRINTED BOARD ASSEMBLIES: SOLDERING FLUX
01/704435 DC : DRAFT FEB 2001 ISO/DIS 16426 FASTENERS - QUALITY ASSURANCE SYSTEM
ISO 35103:2017 Petroleum and natural gas industries — Arctic operations — Environmental monitoring
I.S. EN 13292:1999 SPACE AND ENGINEERING STANDARDS - POLICY AND PRINCIPLES
08/30149503 DC : DRAFT JAN 2008 BS EN ISO 14161 - STERILIZATION OF HEALTH CAR PRODUCTS - BIOLOGICAL INDICATORS - GUIDANCE FOR THE SELECTION, USE AND INTERPRETATION OF RESULTS
ISO 12944-1:2017 Paints and varnishes — Corrosion protection of steel structures by protective paint systems — Part 1: General introduction
14/30304346 DC : 0 BS EN ISO 17782 - PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - QUALIFICATION OF MANUFACTURERS OF SPECIAL MATERIALS
ASTM F 1295 : 2016 : REDLINE Standard Specification for Wrought Titanium-6Aluminum-7Niobium Alloy for Surgical Implant Applications (UNS R56700)
S.R. CEN TR 14383-2:2007 PREVENTION OF CRIME - URBAN PLANNING AND BUILDING DESIGN - PART 2: URBAN PLANNING
14/30286326 DC : 0 BS ISO 18611-3 - SHIPS AND MARINE TECHNOLOGY - MARINE NOX REDUCTION AGENT AUS 40 - PART 3: HANDLING, TRANSPORTATION AND STORAGE
I.S. EN 124-6:2015 GULLY TOPS AND MANHOLE TOPS FOR VEHICULAR AND PEDESTRIAN AREAS - PART 6: GULLY TOPS AND MANHOLE TOPS MADE OF POLYPROPYLENE (PP), POLYETHYLENE (PE) OR UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U)
BS EN 12004-1:2017 Adhesives for ceramic tiles Requirements, assessment and verification of constancy of performance, classification and marking
18/30373170 DC : 0 BS EN 62668-2 - PROCESS MANAGEMENT FOR AVIONICS - COUNTERFEIT PREVENTION - PART 2: MANAGING ELECTRONIC COMPONENTS FROM NON-FRANCHISED SOURCES
ISO 16049-1:2013 Air cargo equipment Restraint straps Part 1: Design criteria and testing methods
16/30336859 DC : 0 BS EN 1852-1 - PLASTICS PIPING SYSTEMS FOR NON-PRESSURE UNDERGROUND DRAINAGE AND SEWERAGE - POLYPROPYLENE (PP) - PART 1: SPECIFICATIONS FOR PIPES, FITTINGS AND THE SYSTEM
BS EN 60601-1-4:1997 Medical electrical equipment. General requirements for safety Collateral standard. General requirements for programmable electrical medical systems
15/30290851 DC : 0 BS EN 54-25 - FIRE DETECTION AND FIRE ALARM SYSTEMS - PART 25: COMPONENTS USING RADIO LINKS
UNI CEN/TR 16017 : 2010 GUIDE TO THE USE OF EN 598
I.S. EN 15651-5:2017 SEALANTS FOR NON-STRUCTURAL USE IN JOINTS IN BUILDINGS AND PEDESTRIAN WALKWAYS - PART 5: ASSESSMENT AND VERIFICATION OF CONSTANCY OF PERFORMANCE, MARKING AND LABELLING
ISO/PAS 28000:2005 Specification for security management systems for the supply chain
DD ISO/PAS 28004:2006 Security management systems for the supply chain. Guidelines for the implementation of ISO/PAS 28000
UNI EN 14587-3 : 2012 RAILWAY APPLICATIONS - TRACK - FLASH BUTT WELDING OF RAILS - PART 3: WELDING IN ASSOCIATION WITH CROSSING CONSTRUCTION
ANSI/ASSE Z490.1 : 2016 CRITERIA FOR ACCEPTED PRACTICES IN SAFETY, HEALTH AND ENVIRONMENTAL TRAINING
15/30295398 DC : 0 BS EN 12081 - RAILWAY APPLICATIONS - AXLEBOXES - LUBRICATING GREASES
I.S. EN 13229:2001 INSET APPLIANCES INCLUDING OPEN FIRES FIRED BY SOLID FUELS - REQUIREMENTS AND TEST METHODS
BS EN 60746-1:2003 Expression of performance of electrochemical analyzers General
11/30231856 DC : 0 BS EN 14125 - THERMOPLASTIC AND FLEXIBLE METAL PIPEWORK FOR UNDERGROUND INSTALLATION AT PETROL FILLING STATIONS
UNI EN 1474-1 : 2009 INSTALLATION AND EQUIPMENT FOR LIQUEFIED NATURAL GAS - DESIGN AND TESTING OF MARINE TRANSFER SYSTEMS - PART 1: DESIGN AND TESTING OF TRANSFER ARMS
BS ISO 9000-2:1997 Quality management and quality assurance standards Generic guidelines for the application of ISO 9001, ISO 9002 and ISO 9003
BS ISO/IEC 25000:2014 Systems and software engineering. Systems and software Quality Requirements and Evaluation (SQuaRE). Guide to SQuaRE
API 17P : 2013 DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - SUBSEA STRUCTURES AND MANIFOLDS
CSA ISO/IEC 21827 : 2009 INFORMATION TECHNOLOGY - SECURITY TECHNIQUES - SYSTEMS SECURITY ENGINEERING - CAPABILITY MATURITY MODEL (SSE-CMM)
PD ISO/TS 29001:2007 Petroleum, petrochemical and natural gas industries. Sector-specific quality management systems. Requirements for product and service supply organizations
14/30272915 DC : 0 BS ISO 18400-106 - SOIL QUALITY - SAMPLING - PART 106: QUALITY CONTROL AND QUALITY ASSURANCE
IS/ISO 10002 : 2004(R2014) QUALITY MANAGEMENT - CUSTOMER SATISFACTION - GUIDELINES FOR COMPLAINTS HANDLING IN ORGANIZATIONS
12/30254917 DC : DRAFT JAN 2012 BS EN 877 - CAST IRON PIPES AND FITTINGS, THEIR JOINTS AND ACCESSORIES FOR THE EVACUATION OF WATER FROM BUILDINGS - REQUIREMENTS, TEST METHODS AND QUALITY ASSURANCE
EN ISO 18797-1:2017 Petroleum, petrochemical and natural gas industries - External corrosion protection of risers by coatings and linings - Part 1: Elastomeric coating systems-polychloroprene or EPDM (ISO 18797-1:2016)
BS ISO 20858:2007 Ships and marine technology. Maritime port facility security assessments and security plan development
CEN/TR 15628:2007 Maintenance - Qualification of Maintenance personnel
BS EN 3537:2010 Aerospace series. Nuts, anchor, self-locking, fixed, two lug, with counterbore, in heat resisting steel, MoS2 lubricated. Classification: 1100 MPa (at ambient temperature)/315°C
PREN 1519-1 : DRAFT 2017 PLASTICS PIPING SYSTEMS FOR SOIL AND WASTE DISCHARGE (LOW AND HIGH TEMPERATURE) WITHIN THE BUILDING STRUCTURE - POLYETHYLENE (PE) - PART 1: REQUIREMENTS FOR PIPES, FITTINGS AND THE SYSTEM
I.S. EN ISO 22000:2005 FOOD SAFETY MANAGEMENT SYSTEMS - REQUIREMENTS FOR ANY ORGANIZATION IN THE FOOD CHAIN
CSA Z24510 : 2010 ACTIVITIES RELATING TO DRINKING WATER AND WASTEWATER SERVICES - GUIDELINES FOR THE ASSESSMENT AND FOR THE IMPROVEMENT OF THE SERVICE TO USERS
11/30251988 DC : 0 BS EN 14190 - GYPSUM PLASTERBOARD PRODUCTS FROM PROCESSING - DEFINITIONS, REQUIREMENTS AND TEST METHODS
11/30250685 DC : 0 ISO/IEC DTS 17022 - CONFORMITY ASSESSMENT - REQUIREMENTS AND RECOMMENDATIONS FOR CONTENT OF A THIRD-PARTY AUDIT REPORT ON MANAGEMENT SYSTEMS
BS EN 2535:2011 Aerospace series. Vacuum deposition of cadmium
I.S. CEN TS 14773:2004 POSTAL SERVICES - QUALITY OF SERVICE - MEASUREMENT OF LOSS AND SUBSTANTIAL DELAY IN PRIORITY AND FIRST CLASS SINGLE PIECE MAIL USING A SURVEY OF TEST LETTERS
I.S. EN ISO 11137-1:2015 STERILIZATION OF HEALTH CARE PRODUCTS - RADIATION - PART 1: REQUIREMENTS FOR DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES (ISO 11137-1:2006, INCLUDING AMD 1:2013)
I.S. EN 61207-3:2002 GAS ANALYZERS - EXPRESSION OF PERFORMANCE - PARAMAGNETIC OXYGEN ANALYZERS
DIN EN 9000-2:2000-11 (Draft) AEROSPACE SERIES - AEROSPACE INDUSTRY QUALITY SYSTEM - PART 2: REQUIREMENTS APPLICABLE TO MAINTENANCE ORGANIZATIONS
CEI EN 61131-6 : 2013 PROGRAMMABLE CONTROLLERS - PART 6: FUNCTIONAL SAFETY
ISO 15175:2004 Soil quality Characterization of soil related to groundwater protection
CSA ISO/IEC 19770-1 :2013 INFORMATION TECHNOLOGY - SOFTWARE ASSET MANAGEMENT - PART 1: PROCESSES AND TIERED ASSESSMENT OF CONFORMANCE
BS EN 1400 : 2013 CHILD USE AND CARE ARTICLES - SOOTHERS FOR BABIES AND YOUNG CHILDREN - SAFETY REQUIREMENTS AND TEST METHODS
DIN ISO 22006:2012-02 Quality management systems - Guidelines for the application of ISO 9001:2008 to crop production (ISO 22006:2009)
I.S. EN 15322:2013 BITUMEN AND BITUMINOUS BINDERS - FRAMEWORK FOR SPECIFYING CUT-BACK AND FLUXED BITUMINOUS BINDERS
I.S. EN 12101-2:2017 SMOKE AND HEAT CONTROL SYSTEMS - PART 2: NATURAL SMOKE AND HEAT EXHAUST VENTILATORS
ISO 55001:2014 Asset management Management systems Requirements
16/30329428 DC : 0 BS EN 12566-6 - SMALL WASTEWATER TREATMENT SYSTEMS FOR UP TO 50 PT - PART 6: PREFABRICATED TREATMENT UNITS FOR SEPTIC TANK EFFLUENT
CSA B625 : 2013 PORTABLE TANKS FOR THE TRANSPORT OF DANGEROUS GOODS
UNI EN 15512 : 2009 STEEL STATIC STORAGE SYSTEMS - ADJUSTABLE PALLET RACKING SYSTEMS - PRINCIPLES FOR STRUCTURAL DESIGN
BS EN 60966-1:1999 Radio frequency and coaxial cable assemblies Generic specification. General requirements and test methods
I.S. ISO 10005:2005 QUALITY MANAGEMENT SYSTEMS - GUIDELINES FOR QUALITY PLANS
DD ISO/TS 12805:2011 Nanotechnologies. Materials specifications. Guidance on specifying nano-objects
S.R. CWA 16642:2013 HEALTH CARE SERVICES - QUALITY CRITERIA FOR HEALTH CHECKS
I.S. EN 14528:2015 BIDETS - FUNCTIONAL REQUIREMENTS AND TEST METHODS
DD CEN ISO/TS 22391-7:2011 Plastics piping systems for hot and cold water installations. Polyethylene of raised temperature resistance (PE-RT) Guidance for the assessment of conformity
BS ISO/IEC 16326:2009 Systems and software engineering. Life cycle processes. Project management
BS EN 16590-3:2014 Tractors and machinery for agriculture and forestry. Safety-related parts of control systems Series development, hardware and software
14/30287372 DC : 0 BS EN 12897 - WATER SUPPLY - SPECIFICATION FOR INDIRECTLY HEATED UNVENTED (CLOSED) STORAGE WATER HEATERS
PREN ISO 11140-1 : DRAFT 2012 STERILIZATION OF HEALTH CARE PRODUCTS - CHEMICAL INDICATORS - PART 1: GENERAL REQUIREMENTS (ISO/DIS 11140-1:2012)
CEI UNI EN 45510-4-1 : 1999 GUIDE FOR PROCUREMENT OF POWER STATION EQUIPMENT - PART 4: BOILER AUXILIARIES - SECTION 1: EQUIPMENT FOR REDUCTION OF DUST EMISSIONS
04/30103162 DC : DRAFT MARCH 2004 EN 12094-5 - FIXED FIREFIGHTING SYSTEMS - COMPONENTS FOR GAS EXTINGUISHING SYSTEMS - PART 5 - REQUIREMENTS AND TEST METHODS FOR HIGH AND LOW PRESSURE SELECTOR VALUES AND THEIR ACTUATORS
17/30363845 DC : 0 BS ISO 21927-3 - SMOKE AND HEAT CONTROL SYSTEMS - PART 3: SPECIFICATION FOR POWERED SMOKE AND HEAT EXHAUST VENTILATORS
PREN 598 : DRAFT 2017 COATED AND LINED DUCTILE IRON PIPES, FITTINGS AND THEIR JOINTS FOR SEWERAGE AND DRAINAGE APPLICATIONS - PRODUCTS CHARACTERISTICS AND TEST AND ASSESSMENT METHODS
15/30327431 DC : 0 BS ISO 15741 - PAINTS AND VARNISHES - FRICTION-REDUCTION COATINGS FOR THE INTERIOR OF ON- AND OFFSHORE STEEL PIPELINES FOR NON-CORROSIVE GASES
BS EN 4071:2009 Aerospace series. Bolts, normal hexagonal head, close tolerance normal shank, short thread, in titanium alloy, aluminium IVD coated. Classification: 1100 MPa (at ambient temperature) / 425 °C
13/30271601 DC : 0 BS ISO 9635-1 - AGRICULTURAL IRRIGATION EQUIPMENT - IRRIGATION VALVES - PART 1: GENERAL REQUIREMENTS
09/30213196 DC : 0 BS ISO 9149 - CORK WALLCOVERINGS IN ROLLS - SPECIFICATIONS
13/30263819 DC : 0 BS ISO 6966-2 - AIRCRAFT GROUND EQUIPMENT - BASIC REQUIREMENTS - PART 2: SAFETY REQUIREMENTS
ISO 22965-1:2007 Concrete — Part 1: Methods of specifying and guidance for the specifier
DIN EN 9000-3:2000-11 (Draft) AEROSPACE SERIES - AEROSPACE INDUSTRY QUALITY SYSTEM - PART 3: REQUIREMENTS APPLICABLE TO STOCKISTS-DISTRIBUTORS
SAE J 20 : 2015 COOLANT SYSTEM HOSES
12/30258334 DC : 0 BS EN 1013 - LIGHT TRANSMITTING SINGLE SKIN PROFILED PLASTIC SHEETS FOR INTERNAL AND EXTERNAL ROOFS, WALLS AND CEILINGS - REQUIREMENTS AND TEST METHODS
PD ISO/TS 20658:2017 Medical laboratories. Requirements for collection, transport, receipt, and handling of samples
BS EN 61014:2003 Programmes for reliability growth
ISO 18436-3:2012 Condition monitoring and diagnostics of machines — Requirements for qualification and assessment of personnel — Part 3: Requirements for training bodies and the training process
07/30150339 DC : 0 BS ISO 27025 - SPACE SYSTEMS - PROGRAMME MANAGEMENT - QUALITY ASSURANCE REQUIREMENTS
DD ENV 61112:2002 Blankets of insulating material for electrical purposes
S.R. CEN/TR 15840:2009 EVALUATION OF CONFORMITY OF FLY ASH FOR CONCRETE - GUIDELINES FOR THE APPLICATION OF EN 450-2
ANSI/AAMI/ISO 13408-3:2006(R2015) ASEPTIC PROCESSING OF HEALTH CARE PRODUCTS - PART 3: LYOPHILIZATION
DIN EN 1337-8 E : 2008 STRUCTURAL BEARINGS - PART 8: GUIDE BEARINGS AND RESTRAINT BEARINGS
BS EN ISO 2919:2014 Radiological protection. Sealed radioactive sources. General requirements and classification
DIN EN 12449:2015-11 (Draft) COPPER AND COPPER ALLOYS - SEAMLESS, ROUND TUBES FOR GENERAL PURPOSES
I.S. EN ISO 11737-1:2018&LC:2018 STERILIZATION OF HEALTH CARE PRODUCTS - MICROBIOLOGICAL METHODS - PART 1: DETERMINATION OF A POPULATION OF MICROORGANISMS ON PRODUCTS (ISO 11737-1:2018)
10/30235503 DC : 0 BS EN 61496-1 AMD 2 - SAFETY OF MACHINERY - ELECTRO-SENSITIVE PROTECTIVE EQUIPMENT - PART 1: GENERAL REQUIREMENTS AND TESTS
DIN EN 15283-2:2009-12 Gypsum boards with fibrous reinforcement - Definitions, requirements and test methods - Part 2: Gypsum fibre boards (includes Amendment A1:2009)
DIN EN 1254-6:2012-12 Copper and copper alloys - Plumbing fittings - Part 6: Fittings with push-fit ends
BS EN 15069:2008 Safety gas connection valves for metal hose assemblies used for the connection of domestic appliances using gaseous fuel
CEI EN 61400-22 : 2011 WIND TURBINES - PART 22: CONFORMITY TESTING AND CERTIFICATION
BS EN 4636:2009 Aerospace series. Screws, 100° countersunk head, six lobe recess, short thread, in titanium alloy TI-P64001, with aluminium pigmented coating. Classification: 1100 MPa (at ambient temperature) / 315°C
09/30140724 DC : 0 BS ISO 26000 - GUIDANCE ON SOCIAL RESPONSIBILITY
DIN EN 15593:2008-05 Packaging - Management of hygiene in the production of packaging for foodstuffs - Requirements
BS ISO 25119-3:2010 Tractors and machinery for agriculture and forestry. Safety-related parts of control systems Series development, hardware and software
BS EN 9104-003:2010 Aerospace series. Quality management systems Requirements for aerospace quality management system (AQMS) auditor training and qualification
PREN 13859-2 : DRAFT 2013 FLEXIBLE SHEETS FOR WATERPROOFING - DEFINITIONS AND CHARACTERISTICS OF UNDERLAYS - PART 2: UNDERLAYS FOR WALLS
09/30197069 DC : 0 BS EN 488 - DISTRICT HEATING PIPES - PREINSULATED BONDED PIPE SYSTEMS FOR DIRECTLY BURIED HOT WATER NETWORKS - STEEL VALVE ASSEMBLY FOR STEEL SERVICE PIPES, POLYURETHANE THERMAL INSULATION AND OUTER CASING OF POLYETHYLENE
DIN EN 16484:2016-02 Leather - Requirements for the determination of the origin of leather production
10/30233189 DC : 0 BS EN 494 - FIBRE-CEMENT PROFILED SHEETS AND FITTINGS - PRODUCT SPECIFICATION AND TEST METHODS
PREN 14141 : DRAFT 2011 VALVES FOR NATURAL GAS TRANSPORTATION IN PIPELINES - PERFORMANCE REQUIREMENTS AND TESTS
08/30156642 DC : DRAFT JULY 2008 BS ISO 25119-1 - TRACTORS AND MACHINERY FOR AGRICULTURE AND FORESTRY - SAFETY-RELATED PARTS OF CONTROL SYSTEMS - PART 1: GENERAL PRINCIPLES FOR DESIGN AND DEVELOPMENT
04/30037050 DC : DRAFT JUNE 2004 ISO/IEC 17021 - GENERAL REQUIREMENTS FOR BODIES OPERATING ASSESSMENT AND CERTIFICATION/REGISTRATION OF QUALITY OR ENVIRONMENTAL MANAGEMENT SYSTEMS
ISO 12576-1:2001 Thermal insulation Insulating materials and products for buildings Conformity control systems Part 1: Factory-made products
ISO 15198:2004 Clinical laboratory medicine — In vitro diagnostic medical devices — Validation of user quality control procedures by the manufacturer
PREN 13279-1 : DRAFT 2017 GYPSUM BINDERS AND GYPSUM PLASTERS - PART 1: DEFINITIONS AND REQUIREMENTS
BS EN 45510-6-6:2000 Guide for the procurement of power station equipment. Turbine auxiliaries Turbine auxiliaries. Wet and wet/dry cooling towers - Section 6: Wet/dry cooling towers
DIN EN 16647 E : 2016 FIREPLACES FOR LIQUID FUELS - DECORATIVE APPLIANCES PRODUCING A FLAME USING ALCOHOL BASED OR GELATINOUS FUEL - USE IN PRIVATE HOUSEHOLDS
BS EN 15285:2008 Agglomerated stone. Modular tiles for flooring and stairs (internal and external)
13/30279579 DC : 0 BS ISO 19372 - MICROTURBINES APPLICATIONS - SAFETY
BS EN 62703:2013 Expression of performance of fluorometric oxygen analyzers in liquid media
07/30162629 DC : 0 BS ISO 4642-1 - RUBBER AND PLASTICS HOSES, NON-COLLAPSIBLE, FOR FIRE-FIGHTING SERVICE - PART 1: SEMI-RIGID HOSES FOR FIXED SYSTEMS
DIN EN 13245-2:2010-11 Plastics - Unplasticized poly(vinyl chloride) (PVC-U) profiles for building applications - Part 2: PVC-U profiles and PVC-UE profiles for internal and external wall and ceiling finishes (includes Corrigendum AC:2009)
PD ISO/IEC TR 20000-5:2013 Information technology. Service management Exemplar implementation plan for ISO/IEC 20000-1
UNI EN 15014 : 2008 PLASTICS PIPING SYSTEMS - BURIED AND ABOVE GROUND SYSTEMS FOR WATER AND OTHER FLUIDS UNDER PRESSURE - PERFORMANCE CHARACTERISTICS FOR PIPES, FITTINGS AND THEIR JOINTS
00/625224 DC : DRAFT SEP 2000 ISO/DIS 15489 INFORMATION AND DOCUMENTATION - RECORDS MANGEMENT
CSA Z245.20-Z245.21 : 2006 EXTERNAL FUSION BOND EPOXY COATING FOR STEEL PIPE/EXTERNAL POLYETHYLENE COATING FOR PIPE
UNI EN 15593 : 2008 PACKAGING - MANAGEMENT OF HYGIENE IN THE PRODUCTION OF PACKAGING FOR FOODSTUFFS - REQUIREMENTS
10/30205098 DC : DRAFT JUNE 2010 BS EN 13481-2 - RAILWAY APPLICATIONS - TRACK - PERFORMANCE REQUIREMENTS FOR FASTENING SYSTEMS - PART 2: FASTENING SYSTEMS FOR CONCRETE SLEEPERS
14/30311109 DC : 0 BS EN 1453-1 - PLASTICS PIPING SYSTEMS WITH STRUCTURED-WALL PIPES FOR SOIL AND WASTE DISCHARGE (LOW AND HIGH TEMPERATURE) INSIDE BUILDINGS - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) - PART 1: SPECIFICATIONS FOR PIPES AND THE SYSTEM
12/30263172 DC : 0 BS EN 1935 - BUILDING HARDWARE - SINGLE-AXIS HINGES - REQUIREMENTS AND TEST METHODS
BS ISO 18647:2017 Petroleum and natural gas industries. Modular drilling rigs for offshore fixed platforms
BS ISO/IEC 40180:2017 Information technology. Quality for learning, education and training. Fundamentals and reference framework Part : General approach
13/30286753 DC : 0 BS ISO 22004 - FOOD SAFETY MANAGEMENT SYSTEMS - GUIDANCE ON THE APPLICATION OF ISO 22000
BS EN 15001-2:2008 Gas infrastructure. Gas installation pipework with an operating pressure greater than 0,5 bar for industrial installations and greater than 5 bar for industrial and non-industrial installations Detailed functional requirements for commissioning, operation and maintenance
DEFSTAN 00-55(PT2)/2(1997) : 1997 ERRATUM 1997 REQUIREMENTS FOR SAFETY RELATED SOFTWARE IN DEFENCE EQUIPMENT - PART 2: GUIDANCE
BS EN 15512:2009 Steel static storage systems. Adjustable pallet racking systems. Principles for structural design
UNI EN 13237 : 2012 POTENTIALLY EXPLOSIVE ATMOSPHERES - TERMS AND DEFINITIONS FOR EQUIPMENT AND PROTECTIVE SYSTEMS INTENDED FOR USE IN POTENTIALLY EXPLOSIVE ATMOSPHERES
PD CEN/TS 1852-2:2015 Plastics piping systems for non-pressure underground drainage and sewerage. Polypropylene (PP) Guidance for the assessment of conformity
UNI CEI ISO/IEC 12207 : 2013 SYSTEMS AND SOFTWARE ENGINEERING - SOFTWARE LIFE CYCLE PROCESSES
PD ISO/TS 19158:2012 Geographic information. Quality assurance of data supply
DIN EN 14695:2010-05 Flexible sheets for waterproofing - Reinforced bitumen sheets for waterproofing of concrete bridge decks and other trafficked areas of concrete - Definitions and characteristics; German version EN 14695:2010
EN 54-5:2017 Fire detection and fire alarm systems - Part 5: Heat detectors - Point heat detectors
I.S. EN 50405:2015 RAILWAY APPLICATIONS - CURRENT COLLECTION SYSTEMS - PANTOGRAPHS, TESTING METHODS FOR CONTACT STRIPS
PD ISO/IEC TS 24748-1:2016 Systems and software engineering. Life cycle management Guidelines for life cycle management
BS ISO 13448-1:2005 Acceptance sampling procedures based on the allocation of priorities principle (APP) Guidelines for the APP approach
10/30207796 DC : 0 BS ISO/IEC 15289 - SOFTWARE AND SYSTEMS ENGINEERING - CONTENT OF LIFE-CYCLE INFORMATION PRODUCTS
BS ISO 14964:2000 Mechanical vibration and shock. Vibration of stationary structures. Specific requirements for quality management in measurement and evaluation of vibration
04/30040790 DC : DRAFT MARCH 2004 ISO/IEC DTR 15443-2 - INFORMATION TECHNOLOGY - SECURITY TECHNIQUES - A FRAMEWORK FOR IT SECURITY ASSURANCE - PART 2 - ASSURANCE METHODS
BS EN 15682-2:2013 Glass in building. Heat soaked thermally toughened alkaline earth silicate safety glass Evaluation of conformity/Product standard
13/30280048 DC : 0 BS EN 16590-2 - TRACTORS AND MACHINERY FOR AGRICULTURE AND FORESTRY - SAFETY-RELATED PARTS OF CONTROL SYSTEMS - PART 2: CONCEPT PHASE
08/30184786 DC : DRAFT JUNE 2008 BS ISO/IEC 26513 - SOFTWARE AND SYSTEMS ENGINEERING - REQUIREMENTS FOR ASSESSORS AND TESTERS OF USER DOCUMENTATION
PD CEN ISO/TS 14907-1:2015 Electronic fee collection. Test procedures for user and fixed equipment Description of test procedures
DIN ISO 15175:2005-05 SOIL QUALITY - CHARACTERIZATION OF SOIL RELATED TO GROUNDWATER PROTECTION
11/30236274 DC : 0 BS ISO 7240-23 - FIRE DETECTION AND ALARM SYSTEMS - PART 23: VISUAL ALARM DEVICES
BIS IS/ISO 15189 : 2012 MEDICAL LABORATORIES - REQUIREMENTS FOR QUALITY AND COMPETENCE
06/30112971 DC : DRAFT JULY 2006 ISO/IEC 62366 - MEDICAL DEVICES - APPLICATION OF USABILITY ENGINEERING TO MEDICAL DEVICES
16/30337296 DC : 0 BS EN ISO 12944-4 - PAINTS AND VARNISHES - CORROSION PROTECTION OF STEEL STRUCTURES BY PROTECTIVE PAINT SYSTEMS - PART 4: TYPES OF SURFACE AND SURFACE PREPARATION
DIN EN 13245-2 E : 2010 PLASTICS - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) PROFILES FOR BUILDING APPLICATIONS - PART 2: PVC-U PROFILES AND PVC-UE PROFILES FOR INTERNAL AND EXTERNAL WALL AND CEILING FINISHES
BS ISO 2020-2:1997 Aerospace. Preformed flexible steel wire rope for aircraft controls Technical specification
PD ISO/IEC TR 20000-3:2009 Information technology. Service management Guidance on scope definition and applicability of ISO/IEC 20000-1
BS ISO 28594:2017 Combined accept-zero sampling systems and process control procedures for product acceptance
11/30251994 DC : 0 BS EN 13963 - JOINTING MATERIALS FOR GYPSUM BOARDS - DEFINITIONS, REQUIREMENTS AND TEST METHODS
UNE-EN 16484:2016 Leather - Requirements for the determination of the origin of leather production
DIN ISO 28000 E : 2015 SPECIFICATION FOR SECURITY MANAGEMENT SYSTEMS FOR THE SUPPLY CHAIN (ISO 28000:2007)
ASTM F 2886 : 2017 : REDLINE Standard Specification for Metal Injection Molded Cobalt-28Chromium-6Molybdenum Components for Surgical Implant Applications
DIN EN 15389 E : 2008 INDUSTRIAL VALVES - PERFORMANCE CHARACTERISTICS OF THERMOPLASTIC VALVES WHEN USED AS CONSTRUCTION PRODUCTS
I.S. EN 9320:2014 AEROSPACE SERIES - PROGRAMME MANAGEMENT - GENERAL GUIDELINES FOR ACQUISITION AND SUPPLY OF OPEN SYSTEMS
11/30251991 DC : 0 BS EN 14195 - METAL FRAMING COMPONENTS FOR GYPSUM PLASTERBOARD SYSTEMS - DEFINITIONS, REQUIREMENTS AND TEST METHODS
PREN ISO 10380 : DRAFT 2011 PIPEWORK - CORRUGATED METAL HOSES AND HOSE ASSEMBLIES
03/304741 DC : DRAFT APR 2003 IEC 60601-1-6 ED.1 - MEDICAL ELECTRICAL EQUIPMENT - PART 1-6: GENERAL REQUIREMENTS FOR SAFETY - COLLATERAL STANDARD - USABILITY
PD ISO/IEC Guide 68:2002 Arrangements for the recognition and acceptance of conformity assessment results
PD6677 : 2002 (R12) IMPLEMENTATION GUIDE FOR NATO AQAP-160 INCORPORATING ALL AQAP-160 TEXT AND RELEVANT ISO TEXT
I.S. ISO 9000-2:1994 QUALITY MANAGEMENT AND QUALITY ASSURANCE STANDARDS - PART 2: GENERIC GUIDELINES FOR THE APPLICATION OF ISO 9001, ISO 9002 AND ISO 9003
DD ISO/TS 16949 : 2009 QUALITY MANAGEMENT SYSTEMS - PARTICULAR REQUIREMENTS FOR THE APPLICATION OF ISO 9001:2008 FOR AUTOMOTIVE PRODUCTION AND RELEVANT SERVICE PART ORGANIZATIONS
FM 2510 : 2014 FLOOD ABATEMENT EQUIPMENT
PREN 13963 : DRAFT 2011 JOINTING MATERIALS FOR GYPSUM BOARDS - DEFINITIONS, REQUIREMENTS AND TEST METHODS
DIN EN 15497 E : 2014 STRUCTURAL FINGER JOINTED SOLID TIMBER - PERFORMANCE REQUIREMENTS AND MINIMUM PRODUCTION REQUIREMENTS
PREN 54-11 : DRAFT 2013 FIRE DETECTION AND FIRE ALARM SYSTEMS - PART 11: MANUAL CALL POINTS
08/30171552 DC : DRAFT JAN 2008 BS EN 13279-1 - GYPSUM BINDERS AND GYPSUM PLASTERS - PART 1: DEFINITIONS AND REQUIREMENTS
CEI EN 61014 : 2006 PROGRAMMES FOR RELIABILITY GROWTH
15/30328781 DC : 0 BS EN 13256 - GEOTEXTILES AND GEOTEXTILE-RELATED PRODUCTS - CHARACTERISTICS REQUIRED FOR USE IN THE CONSTRUCTION OF TUNNELS AND UNDERGROUND STRUCTURES
PREN 12368 : DRAFT 2014 TRAFFIC CONTROL EQUIPMENT - SIGNAL HEADS
14/30287226 DC : 0 BS EN ISO 15378 - PRIMARY PACKAGING MATERIALS FOR MEDICINAL PRODUCTS - PARTICULAR REQUIREMENTS FOR THE APPLICATION OF ISO 9001:2008, WITH REFERENCE TO GOOD MANUFACTURING PRACTICE (GMP)
BS EN ISO 14051:2011 Environmental management. Material flow cost accounting. General framework
DIN EN 14509:2013-12 SELF-SUPPORTING DOUBLE SKIN METAL FACED INSULATING PANELS - FACTORY MADE PRODUCTS - SPECIFICATIONS
ISO 14955-1:2017 Machine tools — Environmental evaluation of machine tools — Part 1: Design methodology for energy-efficient machine tools
16/30333286 DC : 0 BS ISO 14955-1 - MACHINE TOOLS - ENVIRONMENTAL EVALUATION OF MACHINE TOOLS - PART 1: DESIGN METHODOLOGY FOR ENERGY-EFFICIENT MACHINE TOOLS
ISO 28598-2:2017 Acceptance sampling procedures based on the allocation of priorities principle (APP) — Part 2: Coordinated single sampling plans for acceptance sampling by attributes
BS EN 16590-2:2014 Tractors and machinery for agriculture and forestry. Safety-related parts of control systems Concept phase
PREN 14180 : DRAFT 2012 STERILIZERS FOR MEDICAL PURPOSES - LOW TEMPERATURE STEAM AND FORMALDEHYDE STERILIZERS - REQUIREMENTS AND TESTING
ISO/IEC TS 17027:2014 Conformity assessment — Vocabulary related to competence of persons used for certification of persons
S.R. CEN/TR 1317-6:2012 ROAD RESTRAINT SYSTEMS - PART 6: PEDESTRIAN RESTRAINT SYSTEM - PEDESTRIAN PARAPETS
I.S. EN 124-2:2015 GULLY TOPS AND MANHOLE TOPS FOR VEHICULAR AND PEDESTRIAN AREAS - PART 2: GULLY TOPS AND MANHOLE TOPS MADE OF CAST IRON
PREN 13479 : DRAFT 2014 WELDING CONSUMABLES - GENERAL PRODUCT STANDARD FOR FILLER METALS AND FLUXES FOR FUSION WELDING OF METALLIC MATERIALS
PREN 54-20 : DRAFT 2014 FIRE DETECTION AND FIRE ALARM SYSTEMS - PART 20: ASPIRATING SMOKE DETECTORS
PREN 12897 : DRAFT 2014 WATER SUPPLY - SPECIFICATION FOR INDIRECTLY HEATED UNVENTED (CLOSED) STORAGE WATER HEATERS
PREN 14528 : DRAFT 2014 BIDETS - FUNCTIONAL REQUIREMENTS AND TEST METHODS
PREN 14353 : DRAFT 2016 METAL BEADS AND FEATURE PROFILES FOR USE WITH GYPSUM PLASTERBOARDS - DEFINITIONS, REQUIREMENTS AND TEST METHODS
CSA G4 : 2015 STEEL WIRE ROPE FOR GENERAL PURPOSE AND FOR MINE HOISTING AND MINE HAULAGE
I.S. EN ISO 14051:2011 ENVIRONMENTAL MANAGEMENT - MATERIAL FLOW COST ACCOUNTING - GENERAL FRAMEWORK (ISO 14051:2011)
AAMI ISO 10993-1 : 2009 : R2013 BIOLOGICAL EVALUATION OF MEDICAL DEVICES - PART 1: EVALUATION AND TESTING WITHIN A RISK MANAGEMENT PROCESS
BS EN 61192-1:2003 Workmanship requirements for soldered electronic assemblies General
10/30218467 DC : 0 BS ISO/IEC 29155-1 - SOFTWARE AND SYSTEMS ENGINEERING - INFORMATION TECHNOLOGY PROJECT PERFORMANCE BENCHMARKING FRAMEWORK - PART 1: CONCEPTS AND DEFINITIONS
UNI EN 13600 : 2013 COPPER AND COPPER ALLOYS - SEAMLESS COPPER TUBES FOR ELECTRICAL PURPOSES
PREN 14604 : DRAFT 2016 SMOKE ALARM DEVICES
PD ISO/IEC TR 29110-5-2-1:2016 Systems and software engineering. Lifecycle profiles for Very Small Entities (VSEs) Organizational management guidelines
EN 50126-2:2017 Railway Applications - The Specification and Demonstration of Reliability, Availability, Maintainability and Safety (RAMS) - Part 2: Systems Approach to Safety
PREN 15250 : DRAFT 2012 SLOW HEAT RELEASE APPLIANCES FIRED BY SOLID FUEL - REQUIREMENTS AND TEST METHODS
DIN EN 15224:2016-04 (Draft) QUALITY MANAGEMENT SYSTEMS - EN ISO 9001:2015 FOR HEALTHCARE
ASTM F 1377 : 2013 : REDLINE Standard Specification for Cobalt-28Chromium-6Molybdenum Powder for Coating of Orthopedic Implants (UNS R30075)
DIN EN 14811:2016-08 (Draft) RAILWAY APPLICATIONS - TRACK - SPECIAL PURPOSE RAIL - GROOVED AND ASSOCIATED CONSTRUCTION
DD ENV ISO 14253-2:2001 Geometrical product specifications (GPS). Inspection by measurement of workpieces and measuring equipments Guide to the estimation of uncertainty in GPS measurement, in calibration of measuring equipment and in product verification
01/713049 DC : DRAFT SEP 2001 PREN ISO 17662 - WELDING - CALIBRATION, VERIFICATION AND VALIDATION OF EQUIPMENT USED FOR WELDING, INCLUDING ANCILLARY ACTIVITIES
INCITS/ISO/IEC 24700 : 2008 QUALITY AND PERFORMANCE OF OFFICE EQUIPMENT THAT CONTAINS REUSED COMPONENTS
12/30262118 DC BS ISO 14313 - PETROLEUM AND NATURAL GAS INDUSTRIES - PIPELINE TRANSPORTATION SYSTEMS - PIPELINE VALVES
03/103789 DC : DRAFT FEB 2003 BS ISO 10018 - COMPLAINTS HANDLING - GUIDELINES FOR ORGANIZATIONS
05/19976781 DC : DRAFT JUN 2005 BS ISO 15835 - STEEL FOR THE REINFORCMENT OF CONCRETE - MECHANICAL SPLICES FOR BARS - PART 1: REQUIREMENTS
DEFSTAN 05-96/1(1994) : INTERIM GUIDANCE ON QUALITY SYSTEM REQUIREMENTS FOR THE IMPLEMENTATION OF DEF STAN 05-95/ISSUE 2
DIN EN 15644 E : 2009 TRADITIONALLY DESIGNED PREFABRICATED STAIRS MADE OF SOLID WOOD - SPECIFICATIONS AND REQUIREMENTS
BS EN ISO/IEC 17020:2012 Conformity assessment. Requirements for the operation of various types of bodies performing inspection
DIN EN 14695 E : 2010 FLEXIBLE SHEETS FOR WATERPROOFING - REINFORCED BITUMEN SHEETS FOR WATERPROOFING OF CONCRETE BRIDGE DECKS AND OTHER TRAFFICKED AREAS OF CONCRETE - DEFINITIONS AND CHARACTERISTICS
PD ISO/IEC TR 90006:2013 Information technology. Guidelines for the application of ISO 9001:2008 to IT service management and its integration with ISO/IEC 20000-1:2011
DD ENV 1329-2:2001 Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure. Unplasticized poly(vinyl chloride) (PVC-U) Guidance for the assessment of conformity
PD CEN/TS 16555-1:2013 Innovation Management Innovation Management System
ASTM F 1173 : 2001 Standard Specification for Thermosetting Resin Fiberglass Pipe Systems to Be Used for Marine Applications
ISO 16049-2:2013 Air cargo equipment Restraint straps Part 2: Utilization guidelines and lashing calculations
API 683 : 1993 QUALITY IMPROVEMENT MANUAL FOR MECHANICAL EQUIPMENT IN PETROLEUM, CHEMICAL, AND GAS INDUSTRIES
CSA Z15882:09 (R2019) Sterilization of health care products - Chemical indicators - Guidance for selection, use and interpretation of results (Adopted ISO 15882:2008, second edition, 2008-09-01)
11/30239006 DC : 0 BS EN 13237 - POTENTIALLY EXPLOSIVE ATMOSPHERES - TERMS AND DEFINITIONS FOR EQUIPMENT AND PROTECTIVE SYSTEMS INTENDED FOR USE IN POTENTIALLY EXPLOSIVE ATMOSPHERES
DD ISO/PAS 17712:2006 Freight containers. Mechanical seals
DD ENV ISO 14907-1:2001 Road transport and traffic telematics (RTTT). Electronic fee collection (EFC). Test procedures for user and fixed equipment Description of test procedures
ISO 10799:2001 Structural steels Cold-formed, welded, structural hollow sections Technical delivery requirements
BS EN 50126-2:2017 Railway Applications. The Specification and Demonstration of Reliability, Availability, Maintainability and Safety (RAMS) Systems Approach to Safety
ISO/IEC TR 29110-5-3:2018 Systems and software engineering — Lifecycle profiles for Very Small Entities (VSEs) — Part 5-3: Service delivery guidelines
04/30114492 DC : DRAFT JUNE 2004 ISO/IEC 19796-1 - INFORMATION TECHNOLOGY - QUALITY MANAGEMENT, ASSURANCE, AND METRICS - PART 1: GENERAL APPROACH
DIN EN 15345:2008-02 Plastics - Recycled Plastics - Characterisation of Polypropylene (PP) recyclates
PD CEN/TS 1453-2:2017 Plastics piping systems with structured wall pipes for soil and waste discharge (low and high temperature) inside buildings. Unplasticized poly(vinyl chloride) (PVC-U) Guidance for the assessment of conformity
14/30311454 DC : 0 BS EN 14528 - BIDETS - FUNCTIONAL REQUIREMENTS AND TEST METHODS
DIN EN 15381:2008-11 GEOTEXTILES AND GEOTEXTILE-RELATED PRODUCTS - CHARACTERISTICS REQUIRED FOR USE IN PAVEMENTS AND ASPHALT OVERLAYS
BS EN 60987:2015 Nuclear power plants. Instrumentation and control important to safety. Hardware design requirements for computer-based systems
15/30320777 DC : 0 BS EN 14375 - CHILD-RESISTANT NON-RECLOSABLE PACKAGING FOR PHARMACEUTICAL PRODUCTS - REQUIREMENTS AND TESTING
17/30347294 DC : 0 BS EN 60076-22-1 - POWER TRANSFORMER AND REACTOR FITTINGS - PART 22-1: PROTECTIVE DEVICES
10/30216811 DC : 0 BS ISO 2919 - RADIATION PROTECTION - SEALED RADIOACTIVE SOURCES - GENERAL REQUIREMENTS AND CLASSIFICATION
PD CEN ISO/TR 25108:2006 Non-destructive testing. Guidelines for NDT personnel training organizations
S.R. CEN/TS 12201-7:2014 PLASTICS PIPING SYSTEMS FOR WATER SUPPLY, AND FOR DRAINAGE AND SEWERAGE UNDER PRESSURE - POLYETHYLENE (PE) - PART 7: GUIDANCE FOR THE ASSESSMENT OF CONFORMITY
BS ISO 18185-4:2007 Freight containers. Electronic seals Data protection
02/400385 DC : DRAFT APR 2002 ISO 10007 - QUALITY MANAGEMENT SYSTEMS - GUIDELINES FOR CONFIGURATION MANAGEMENT
02/107768 DC : DRAFT DEC 2002 BS EN 74-1 - COUPLERS, SPIGOT PINS AND BASEPLATES FOR USE IN FALSEWORK AND SCAFFOLDS - PART 1: COUPLERS FOR TUBES - REQUIREMENTS AND TEST PROCEDURES
DIN EN ISO 11135:2014-10 STERILIZATION OF HEALTH CARE PRODUCTS - ETHYLENE OXIDE - REQUIREMENTS FOR THE DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES (ISO 11135:2014)
PREN 16855 : DRAFT 2015 WALK-IN COLD ROOMS - DEFINITION, THERMAL INSULATION PERFORMANCE AND TEST METHODS - PART 1: PREFABRICATED COLD ROOM KITS
PREN 13658-1 : DRAFT 2017 METAL LATH AND BEADS - DEFINITIONS, REQUIREMENTS AND TEST METHODS - PART 1: INTERNAL PLASTERING
BS EN ISO 6789-1:2017 Assembly tools for screws and nuts. Hand torque tools Requirements and methods for design conformance testing and quality conformance testing: minimum requirements for declaration of conformance
PREN 14811 : DRAFT 2016 RAILWAY APPLICATIONS - TRACK - SPECIAL PURPOSE RAIL - GRVED AND ASSOCIATED CONSTRUCTION
DD CEN ISO/TS 14907-1:2010 Electronic fee collection. Test procedures for user and fixed equipment Description of test procedures
BS ISO 15175 : 2004 SOIL QUALITY - CHARACTERIZATION OF SOIL RELATED TO GROUNDWATER PROTECTION
BS HB10218(2002) : 2002 ISO 9000:2000 - ACHIEVING REGISTRATION
15/30278562 DC : 0 BS ISO 18797-1 - PETROLEUM, PETROCHEMICALS AND NATURAL GAS INDUSTRIES - EXTERNAL CORROSION PROTECTION OF RISERS BY COATINGS AND LININGS - PART 1: ELASTOMERIC COATING SYSTEMS - POLYCHLOROPRENE OR EPDM
17/30300276 DC : 0 BS ISO 19443 - QUALITY MANAGEMENT SYSTEMS - SPECIFIC REQUIREMENTS FOR THE APPLICATION OF ISO 9001 AND IAEA GS-R REQUIREMENTS BY ORGANIZATIONS IN THE SUPPLY CHAIN OF THE NUCLEAR ENERGY SECTOR
BS ISO 12319:2006 Aerospace. \'P\' (loop style) clamps. Procurement specification
PD CEN/TS 1455-2:2012 Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure. Acrylonitrile-butadiene-styrene (ABS) Guidance for the assessment of conformity
I.S. EN 62366-1:2015&AC:2015 MEDICAL DEVICES - PART 1: APPLICATION OF USABILITY ENGINEERING TO MEDICAL DEVICES
PD ISO/IEC TR 15504-6:2008 Information technology. Process assessment An exemplar system life cycle process assessment model
DD CEN/TS 13476-4:2008 Plastics piping systems for non-pressure underground drainage and sewerage. Structured-wall piping systems of unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) Guidance for the assessment of conformity
BS EN 12966:2014 Road vertical signs. Variable message traffic signs
16/30338304 DC : 0 BS ISO/ASTM 52903-1 - ADDITIVE MANUFACTURING - STANDARD SPECIFICATION FOR MATERIAL EXTRUSION BASED ADDITIVE MANUFACTURING OF PLASTIC MATERIALS - PART 1: FEEDSTOCK MATERIALS
OIML G 21 : 2017 GUIDANCE FOR DEFINING THE REQUIREMENTS FOR A CERTIFICATION SYSTEM FOR PREPACKAGES
CSA ISO/TR 13121 : 2013 NANOTECHNOLOGIES - NANOMATERIAL RISK EVALUATION
PD ISO/IEC TR 17026:2015 Conformity assessment. Example of a certification scheme for tangible products
CEI UNI 70018 : 2009 CONFORMITY ASSESSMENT - GUIDANCE ON THE USE OF AN ORGANIZATION'S QUALITY MANAGEMENT SYSTEM IN PRODUCT CERTIFICATION
06/30145607 DC : DRAFT FEB 2006 ISO/DIS 8873-2 - RIGID CELLULAR PLASTICS - SPRAY-APPLIED POLYURETHANE FOAM - PART 2: APPLICATION
BS EN 10343:2009 Steels for quenching and tempering for construction purposes. Technical delivery conditions
DD ENV 1453-2:2001 Plastics piping systems with structured wall pipes for soil and waste discharge (low and high temperature) inside buildings. Unplasticized poly(vinyl chloride) (PVC-U) Guidance for the assessment of conformity
CEI 14-4/8 : 2001 POWER TRANSFORMERS - APPLICATION GUIDE
BS EN 16271:2012 Value management. Functional expression of the need and functional performance specification. Requirements for expressing and validating the need to be satisfied within the process of purchasing or obtaining a product
PREN 54-10 : DRAFT 2012 FIRE DETECTION AND FIRE ALARM SYSTEMS - PART 10: FLAME DETECTORS - POINT DETECTORS
S.R. CWA 16597:2013 FISHBIZZ BUSINESS CASE - FOR MONITORING OF QUALITY AND SALES OF FISH PRODUCTS
PREN 12050-2 : DRAFT 2012 WASTEWATER LIFTING PLANTS FOR BUILDINGS AND SITES - PRINCIPLES OF CONSTRUCTION AND TESTING - PART 2: LIFTING PLANTS FOR FAECAL-FREE WASTEWATER
BS EN 50581:2012 Technical documentation for the assessment of electrical and electronic products with respect to the restriction of hazardous substances
DIN EN 14636-2:2010-04 Plastics piping systems for non-pressure drainage and sewerage - Polyester resin concrete (PRC) - Part 2: Manholes and inspection chambers
17/30351717 DC : 0 BS EN ISO 11607-1 - PACKAGING FOR TERMINALLY STERILIZED MEDICAL DEVICES - PART 1: REQUIREMENTS FOR MATERIALS, STERILE BARRIER SYSTEMS AND PACKAGING SYSTEMS
BS EN 61478:2001 Live working. Ladders of insulating material
17/30354844 DC : 0 BS ISO 55002 - ASSET MANAGEMENT - MANAGEMENT SYSTEMS - GUIDELINES FOR THE APPLICATION OF ISO 55001
BS ISO 28000:2007 Specification for security management systems for the supply chain
13/30281408 DC : 0 BS EN 61869-10 - INSTRUMENT TRANSFORMERS - PART 10: ADDITIONAL REQUIREMENTS FOR LOW-POWER, STAND-ALONE CURRENT SENSORS
04/30090376 DC : DRAFT DEC 2004 ISO 13408-3 - ASEPTIC PROCESSING OF HEALTH CARE PRODUCTS - PART 3: LYOPHILIZATION
PREN 572-9 : DRAFT 2017 GLASS IN BUILDING - BASIC SODA LIME SILICATE GLASS PRODUCTS - PART 9: PRODUCT STANDARD
BS ISO 13448-2:2004 Acceptance sampling procedures based on the allocation of priorities principles (APP) Coordinated single sampling plans for acceptance sampling by attributes
02/103630 DC : DRAFT MAY 2002 PREN 12446 - CHIMNEYS - COMPONENTS - CONCRETE OUTER WALL ELEMENTS
PD 6538:1993 Vision 2000. A strategy for international standards\' implementation in the quality arena during the 1990s
11/30247885 DC : 0 BS EN 9103 - AEROSPACE SERIES - QUALITY MANAGEMENT SYSTEMS - VARIATION MANAGEMENT OF KEY CHARACTERISTICS
CEI EN 61897 : 1999 OVERHEAD LINES - REQUIREMENTS AND TESTS FOR STOCKBRIDGE TYPE AEOLIAN VIBRATION DAMPERS
S.R. CEN/TS 1455-2:2012 PLASTICS PIPING SYSTEMS FOR SOIL AND WASTE DISCHARGE (LOW AND HIGH TEMPERATURE) WITHIN THE BUILDING STRUCTURE - ACRYLONITRILE-BUTADIENE-STYRENE (ABS) - PART 2: GUIDANCE FOR THE ASSESSMENT OF CONFORMITY
CSA C61400-3 : 2011 : R2016 WIND TURBINES - PART 3: DESIGN REQUIREMENTS FOR OFFSHORE WIND TURBINES
DIN EN 124-4 E : 2015 GULLY TOPS AND MANHOLE TOPS FOR VEHICULAR AND PEDESTRIAN AREAS - PART 4: GULLY TOPS AND MANHOLE TOPS MADE OF STEEL REINFORCED CONCRETE
13/30280041 DC : 0 BS EN 16590-1 - TRACTORS AND MACHINERY FOR AGRICULTURE AND FORESTRY - SAFETY-RELATED PARTS OF CONTROL SYSTEMS - PART 1: GENERAL PRINCIPLES FOR DESIGN AND DEVELOPMENT
13/30279690 DC : 0 BS EN 16250-1 - LEVELS OF PERFORMANCE AND ACCEPTANCE FOR STREET CLEANING AND MUNICIPAL WASTE MANAGEMENT SERVICES - PART 1: GENERAL REQUIREMENTS
DIN EN 14535-2:2011-09 RAILWAY APPLICATIONS - BRAKE DISCS FOR RAILWAY ROLLING STOCK - PART 2: BRAKE DISCS MOUNTED ONTO THE WHEEL, DIMENSIONS AND QUALITY REQUIREMENTS
UNI CEN/TS 1455-2 : 2012 PLASTICS PIPING SYSTEMS FOR SOIL AND WASTE DISCHARGE (LOW AND HIGH TEMPERATURE) WITHIN THE BUILDING STRUCTURE - ACRYLONITRILE-BUTADIENE-STYRENE (ABS) - PART 2: GUIDANCE FOR THE ASSESSMENT OF CONFORMITY
I.S. EN 45510-4-9:1999 GUIDE FOR PROCUREMENT OF POWER STATION EQUIPMENT - PART 4-9: BOILER AUXILIARIES - SOOTBLOWERS
PD CEN/TS 12666-2:2012 Plastics piping systems for non-pressure underground drainage and sewerage. Polyethylene (PE) Guidance for the assessment of conformity
BS EN 16484:2015 Leather. Requirements for the determination of the origin of leather production
16/30329864 DC : 0 BS IEC 63000 - TECHNICAL DOCUMENTATION FOR THE ASSESSMENT OF ELECTRICAL AND ELECTRONIC PRODUCTS WITH RESPECT TO THE RESTRICTION OF HAZARDOUS SUBSTANCES
02/647837 DC : DRAFT OCT 2002 PD 0026 - SOFTWARE AND SYSTEM QUALITY FRAMEWORK
06/30106186 DC : 0 ISO 10993-1 - BIOLOGICAL EVALUATION OF MEDICAL DEVICES - PART 1: EVALUATION AND TESTING WITHIN A RISK MANAGEMENT SYSTEM
BS EN 62430:2009 Environmentally conscious design for electrical and electronic products
17/30355975 DC : 0 BS ISO 14375 - CHILD-RESISTANT NON-RECLOSABLE PACKAGING FOR PHARMACEUTICAL PRODUCTS - REQUIREMENTS AND TESTING
09/30184483 DC : 0 BS EN 54-3 - FIRE DETECTION AND FIRE ALARM SYSTEMS - PART 3: FIRE ALARM DEVICES - SOUNDERS
API 6DSS : 2017-08 SPECIFICATION FOR SUBSEA PIPELINE VALVES
05/30138310 DC : DRAFT AUG 2005 ISO 15882 ED 2 - STERILIZATION OF HEALTH CARE PRODUCTS - CHEMICAL INDICATORS - GUIDANCE FOR SELECTION, USE AND INTERPRETATION OF RESULTS
08/30189631 DC : DRAFT SEP 2008 BS EN 50215 - RAILWAY APPLICATIONS - ROLLING STOCK - TESTING OF ROLLING STOCK ON COMPLETION OF CONSTRUCTION AND BEFORE ENTRY INTO SERVICE
10/30212556 DC : 0 BS EN 13282-3 - HYDRAULIC ROAD BINDERS - PART 3: CONFORMITY EVALUATION
12/30259207 DC : DRAFT JUNE 2012 BS EN 13984 - FLEXIBLE SHEETS FOR WATERPROOFING - PLASTIC AND RUBBER VAPOUR CONTROL LAYERS - DEFINITIONS AND CHARACTERISTICS
CSA ISO/IEC 15504-4 : 2005 : R2015 INFORMATION TECHNOLOGY - PROCESS ASSESSMENT - PART 4: GUIDANCE ON USE FOR PROCESS IMPROVEMENT AND PROCESS CAPABILITY DETERMINATION
SAE AS 5553B : 2016 COUNTERFEIT ELECTRICAL, ELECTRONIC, AND ELECTROMECHANICAL (EEE) PARTS; AVOIDANCE, DETECTION, MITIGATION, AND DISPOSITION
CSA ISO 10012 : 2003 MEASUREMENT MANAGEMENT SYSTEMS - REQUIREMENTS FOR MEASUREMENT PROCESSES AND MEASURING EQUIPMENT
AAMI ISO 17665-1 : 2006 STERILIZATION OF HEALTH CARE PRODUCTS - MOIST HEAT - PART 1: REQUIREMENTS FOR THE DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES
AAMI ISO 11140-4 : 2007 STERILIZATION OF HEALTH CARE PRODUCTS - CHEMICAL INDICATORS - PART 4: CLASS 2 INDICATORS AS AN ALTERNATIVE TO THE BOWIE AND DICK-TYPE TEST FOR DETECTION OF STEAM PENETRATION
08/30195548 DC : 0 DD ISO/TS 16949: 2009 - QUALITY MANAGEMENT SYSTEMS: PARTICULAR REQUIREMENTS FOR THE APPLICATION OF ISO 9001:2008 FOR AUTOMOTIVE PRODUCTION AND RELEVANT SERVICE PART ORGANIZATIONS
06/30084693 DC : 0 BS ISO 15392 - SUSTAINABILITY IN BUILDING CONSTRUCTION - GENERAL PRINCIPLES
BS EN 45510-3-3:2000 Guide for the procurement of power station equipment. Boilers Boilers with fluidized bed firing - Section 3: Boilers with fluidised bed firing
CSA Z245.6:2006 COILED ALUMINUM LINE PIPE AND ACCESSORIES
02/540596 DC : DRAFT JULY 2002 PREN 54-17 - FIRE DETECTION AND FIRE ALARM SYSTEMS - PART 17: SHORT CIRCUIT ISOLATORS
S.R. CEN/TS 12200-2:2017 PLASTICS RAINWATER PIPING SYSTEMS FOR ABOVE GROUND EXTERNAL USE - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) - PART 2: GUIDANCE FOR THE ASSESSMENT OF CONFORMITY
CSA E432.2 : 1998 : INC : UPD 1 : 1998 : R2012 SAFETY SPECIFICATIONS FOR INCANDESCENT LAMPS - TUNGSTEN HALOGEN LAMPS FOR DOMESTIC AND SIMILAR GENERAL LIGHTING PURPOSES
DD ISO/TS 29001 : 2010 PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - SECTOR-SPECIFIC QUALITY MANAGEMENT SYSTEMS - REQUIREMENTS FOR PRODUCT AND SERVICE SUPPLY ORGANIZATIONS
CSA ISO 10014 : 2006 : R2016 QUALITY MANAGEMENT - GUIDELINES FOR REALIZING FINANCIAL AND ECONOMIC BENEFITS
CSA ISO 10001 : 2008 : R2017 QUALITY MANAGEMENT - CUSTOMER SATISFACTION - GUIDELINES FOR CODES OF CONDUCT FOR ORGANIZATIONS
ISO 6789-2:2017 Assembly tools for screws and nuts — Hand torque tools — Part 2: Requirements for calibration and determination of measurement uncertainty
07/30167951 DC : 0 BS EN 60076-1 - POWER TRANSFORMERS - PART 1: GENERAL
API 20A : 2017 CARBON STEEL, ALLOY STEEL, STAINLESS STEEL, AND NICKEL BASE ALLOY CASTINGS FOR USE IN THE PETROLEUM AND NATURAL GAS INDUSTRY
BS EN ISO 3266 : 2010 FORGED STEEL EYEBOLTS GRADE 4 FOR GENERAL LIFTING PURPOSES (ISO 3266:2010+A1:2015)
CSA Z1416: 2011 STERILIZATION OF HEALTH CARE PRODUCTS - BIOLOGICAL INDICATORS - GUIDANCE FOR THE SELECTION, USE AND INTERPRETATION OF RESULTS
ASTM F 2384 : 2010 Standard Specification for Wrought Zirconium-2.5Niobium Alloy for Surgical Implant Applications (UNS R60901)
CSA ISO/IEC 15288 : 2009 : R2014 SYSTEMS AND SOFTWARE ENGINEERING - SYSTEM LIFE CYCLE PROCESSES
ASTM F 998 : 2012 Standard Specification for Centrifugal Pump, Shipboard Use
ISO 13485:2016 Medical devices Quality management systems Requirements for regulatory purposes
UNE-EN 16280:2013 Breath alcohol test devices for general public - Requirements and test methods
CSA ISO 10001:2008 QUALITY MANAGEMENT - CUSTOMER SATISFACTION - GUIDELINES FOR CODES OF CONDUCT FOR ORGANIZATIONS
BS EN 60794-4-10:2014 Optical fibre cables Family specification. Optical ground wires (OPGW) along electrical power lines
BIS IS/ISO 10012 : 2003(R2009) MEASUREMENT MANAGEMENT SYSTEMS - REQUIREMENTS FOR MEASUREMENT PROCESSES AND MEASURING EQUIPMENT
IEEE 20000-2-2013 IEEE Standard -- Adoption of ISO/IEC 20000-2:2012, Information technology -- Service management -- Part 2: Guidance on the application of service management systems
PD CEN/TR 15419:2017 Protective clothing. Guidelines for selection, use, care and maintenance of chemical protective clothing
BS ISO 9631:2018 Rubber seals. Joint rings for pipelines for hot-water supply up to 110 °C. Specification for the material
CSAISO 10007 : 2003 QUALITY MANAGEMENT SYSTEMS - GUIDELINES FOR CONFIGURATION MANAGEMENT
CSA Z11135-1 :2009 STERILIZATION OF HEALTH CARE PRODUCTS - ETHYLENE OXIDE - PART 1: REQUIREMENTS FOR DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES
06/30157853 DC : 0 BS EN 10255 AMD 1 - NON-ALLOY STEEL TUBES SUITABLE FOR WELDING AND THREADING - TECHNICAL DELIVERY CONDITIONS
UNE-EN 14587-3:2013 Railway applications - Track - Flash butt welding of rails - Part 3: Welding in association with crossing construction
UNI EN 13601 : 2013 COPPER AND COPPER ALLOYS - COPPER ROD, BAR AND WIRE FOR GENERAL ELECTRICAL PURPOSES
CSA ISO/IEC 12207 : 2009 : R2014 SYSTEMS AND SOFTWARE ENGINEERING - SOFTWARE LIFE CYCLE PROCESSES
GR 1252 CORE : ISSUE 1 QUALITY SYSTEM GENERIC REQUIREMENTS FOR HARDWARE
PREN 14904-1 : DRAFT 2017 SURFACES FOR SPORTS AREAS - MULTI-SPORTS FLOOR SYSTEMS FOR INDOOR USE - PART 1: ESSENTIAL CHARACTERISTICS
CSA ISO/TR 10017 : 2003 : R2013 GUIDANCE ON STATISTICAL TECHNIQUES FOR ISO 9001:2000
CSA Z11135 : 2015 STERILIZATION OF HEALTH-CARE PRODUCTS - ETHYLENE OXIDE - REQUIREMENTS FOR THE DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES
UNE-EN 15221-3:2012 Facility Management - Part 3: Guidance on quality in Facility Management
CSA ISO/TS 16949 : 2009(R2015) QUALITY MANAGEMENT SYSTEMS - PARTICULAR REQUIREMENTS FOR THE APPLICATION OF ISO 9001:2008 FOR AUTOMOTIVE PRODUCTION AND RELEVANT SERVICE PART ORGANIZATIONS
I.S. EN ISO 12944-4:2017 PAINTS AND VARNISHES - CORROSION PROTECTION OF STEEL STRUCTURES BY PROTECTIVE PAINT SYSTEMS - PART 4: TYPES OF SURFACE AND SURFACE PREPARATION (ISO 12944-4:2017)
ISO 10799-1:2011 Cold-formed welded structural hollow sections of non-alloy and fine grain steels — Part 1: Technical delivery conditions
ASTM F 1173 : 2001 : R2006 Standard Specification for Thermosetting Resin Fiberglass Pipe Systems to Be Used for Marine Applications
NF ISO/IEC 12207 : 1995 INFORMATION TECHNOLOGY - SOFTWARE ENGINEERING - SOFTWARE LIFE-CYCLE PROCESSES
PREN 50405 : DRAFT 2014 RAILWAY APPLICATIONS - CURRENT COLLECTION SYSTEMS - PANTOGRAPHS, TESTING METHODS FOR CARBON CONTACT STRIPS
UNI EN 10340 : 2008 STEEL CASTINGS FOR STRUCTURAL USES
CSA TELECOM ORGANIZATIONS PACKAGE : 2018 CONSISTS OF CAN/CSA-ISO/IEC 27000:18 - INFORMATION TECHNOLOGY - SECURITY TECHNIQUES - INFORMATION SECURITY MANAGEMENT SYSTEMS - OVERVIEW AND VOCABULARY; CAN/CSA-ISO/IEC 27001:14, INFORMATION TECHNOLOGY - SECURITY TECHNIQUES - INFORMATION SECURITY MANAGEMENT SYSTEMS - REQUIREMENTS; CAN/CSA-ISO/IEC 27002:15 - INFORMATION TECHNOLOGY - SECURITY TECHNIQUES - CODE OF PRACTICE FOR
UNI EN 16240 : 2014 LIGHT TRANSMITTING FLAT SOLID POLYCARBONATE (PC) SHEETS FOR INTERNAL AND EXTERNAL USE IN ROOFS, WALLS AND CEILINGS - REQUIREMENTS AND TEST METHODS
05/30136043 DC : DRAFT JUL 2005 EN 15282 - VITREOUS AND PORCELAIN ENAMELS - DESIGN OF VITREOUS ENAMEL COATED BOLTED STEEL TANKS FOR THE STORAGE OR TREATMENT OF WATER OR MUNICIPAL OR INDUSTRIAL EFFLUENTS
UNE-EN 12899-2:2010 Fixed, vertical road traffic signs - Part 2: Transilluminated traffic bollards (TTB)
UNE-CEN/TS 1555-7:2015 Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) - Part 7: Guidance for the assessment of conformity
AAMI TIR59:2017 INTEGRATING HUMAN FACTORS INTO DESIGN CONTROLS
MIL-HDBK-896 Revision A:2016 MANUFACTURING MANAGEMENT PROGRAM GUIDE
CSA C1325 : 1999 : R2016 INSULATORS FOR OVERHEAD LINES WITH A NOMINAL VOLTAGE ABOVE 1000 V - CERAMIC OR GLASS INSULATOR UNITS FOR D.C. SYSTEMS - DEFINITIONS, TEST METHODS AND ACCEPTANCE CRITERIA
02/104192 DC : DRAFT JUN 2002 EN 1856-1 - CHIMNEYS - REQUIREMENTS FOR METAL CHIMNEYS - PART 1: SYSTEM CHIMNEY PRODUCTS
PD CEN/TR 15276-1:2009 Fixed firefighting systems. Condensed aerosol extinguishing systems Requirements and test methods for components
UNI CEN/TS 15511 : 2008 POSTAL SERVICES - QUALITY OF SERVICE - INFORMATION AVAILABLE ON POSTAL SERVICES
EI 1570 : 2012 HANDBOOK ON ELECTRONIC SENSORS FOR THE DETECTION OF PARTICULATE MATTER AND/OR FREE WATER DURING AIRCRAFT REFUELLING
CAN/CSA-ISO/IEC 15426-1-07 (R2017) Information Technology - Automatic Identification and Data Capture Techniques - Bar Code Verifier Conformance Specification - Part 1: Linear Symbols (Adopted ISO/IEC 15426-1:2006, second edition, 2006-06-01)
08/30133979 DC : DRAFT MAY 2008 BS ISO 23409 - MALE CONDOMS - REQUIREMENTS AND TEST METHODS FOR CONDOMS MADE FROM SYNTHETIC MATERIALS
CSA ISO/IEC 15504-4 : 2005 : R2010 INFORMATION TECHNOLOGY - PROCESS ASSESSMENT - PART 4: GUIDANCE ON USE FOR PROCESS IMPROVEMENT AND PROCESS CAPABILITY DETERMINATION
CEI UNI 70019 : 2008 CONFORMITY ASSESSMENT ARRANGEMENTS FOR THE RECOGNITION AND ACCEPTANCE OF CONFORMITY ASSESSMENT RESULTS
CEI UNI EN 45510-3-2 : 2000 GUIDE FOR PROCUREMENT OF POWER STATION EQUIPMENT - PART 3-2: BOILERS - SHELL BOILERS
INCITS/ISO/IEC 10967-1 : 1994 INFORMATION TECHNOLOGY - LANGUAGE INDEPENDENT ARITHMETIC - PART 1: INTEGER AND FLOATING POINT ARITHMETIC
ASTM F 3055 : 2014 : EDT 1 Standard Specification for Additive Manufacturing Nickel Alloy (UNS N07718) with Powder Bed Fusion
CSA ISO TS 16949 : 2009 QUALITY MANAGEMENT SYSTEMS - PARTICULAR REQUIREMENTS FOR THE APPLICATION OF ISO 9001:2008 FOR AUTOMOTIVE PRODUCTION AND RELEVANT SERVICE PART ORGANIZATIONS
I.S. EN 1254-3:1998 COPPER AND COPPER ALLOYS - PLUMBING FITTINGS - PART 3: FITTINGS WITH COMPRESSION ENDS FOR USE WITH PLASTICS PIPES
I.S. EN 54-12:2015 FIRE DETECTION AND FIRE ALARM SYSTEMS - PART 12: SMOKE DETECTORS - LINE DETECTORS USING AN OPTICAL BEAM
09/30197779 DC : 0 BS ISO 7240-25 - FIRE DETECTION AND FIRE ALARM SYSTEMS - PART 25: COMPONENTS USING RADIO TRANSMISSION PATHS
ISO 10327:2014 Air cargo Main deck containers Design and testing
CSA ISO/IEC 15504-4 : 2005 INFORMATION TECHNOLOGY - PROCESS ASSESSMENT - PART 4: GUIDANCE ON USE FOR PROCESS IMPROVEMENT AND PROCESS CAPABILITY DETERMINATION
CSA ISO 14937 : 2011 STERILIZATION OF HEALTH CARE PRODUCTS - GENERAL REQUIREMENTS FOR CHARACTERIZATION OF A STERILIZING AGENT AND THE DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES
EN 1279-6:2002 Glass in building - Insulating glass units - Part 6: Factory production control and periodic tests
PREN 2755 : 200P3 AEROSPACE SERIES - BEARINGS, SPHERICAL PLAIN IN CORROSION RESISTING STEEL WITH SELF-LUBRICATING LINER - ELEVATED LOAD AT AMBIENT TEMPERATURE - TECHNICAL SPECIFICATION
PREN 14620-1 : DRAFT 2003 DESIGN AND MANUFACTURE OF SITE BUILT, VERTICAL, CYLINDRICAL, FLAT-BOTTOMED STEEL TANKS FOR THE STORAGE OF REFRIGERATED, LIQUEFIED GASES WITH OPERATING TEMPERATURES BETWEEN -5 DEGREES C AND -165 DEGREES C - PART 1: GENERAL
DIN EN 14353 E : 2017 METAL BEADS AND FEATURE PROFILES FOR USE WITH GYPSUM PLASTERBOARDS - DEFINITIONS, REQUIREMENTS AND TEST METHODS
DIN EN 15655:2016-07 (Draft) DUCTILE IRON PIPES, FITTINGS AND ACCESSORIES - INTERNAL POLYURETHANE LINING FOR PIPES AND FITTINGS - REQUIREMENTS AND TEST METHODS
CEN/TR 15472:2006 Postal services - Measurement of transit times for parcels by the use of a track and trace system
UNE-EN 1317-5:2008 Road restraint systems - Part 5: Product requirements and evaluation of conformity for vehicle restraint systems
ISO 23409:2011 Male condoms Requirements and test methods for condoms made from synthetic materials
PREN 14342 : DRAFT 2011 WOOD FLOORING - CHARACTERISTICS, EVALUATION OF CONFORMITY AND MARKING
ISO 17258:2015 Statistical methods Six Sigma Basic criteria underlying benchmarking for Six Sigma in organisations
UNE-ISO 2230:2012 Rubber products. Guidelines for storage
DIN ISO 9000-2 : DRAFT 92 QUALITY MANAGEMENT AND QUALITY ASSURANCE STANDARDS - PART 2: GENERIC GUIDELINES FOR THE APPLICATION OF ISO 9001, ISO 9002 AND ISO 9003
I.S. EN 2535:2011 AEROSPACE SERIES - VACUUM DEPOSITION OF CADMIUM
CSA N292.5 : 2011 : R2016 GUIDELINE FOR THE EXEMPTION OR CLEARANCE FROM REGULATORY CONTROL OF MATERIALS THAT CONTAIN, OR POTENTIALLY CONTAIN, NUCLEAR SUBSTANCES
CSA ISO 10014:2006 QUALITY MANAGEMENT - GUIDELINES FOR REALIZING FINANCIAL AND ECONOMIC BENEFITS
UNE-EN 15286:2013 Agglomerated stone - Slabs and tiles for wall finishes (internal and external)
CEN/TR 16017:2010 Guide to the use of EN 598
PREN 1254-6 : DRAFT 2011 COPPER AND COPPER ALLOYS - PLUMBING FITTINGS - PART 6: FITTING WITH PUSH-FIT ENDS
ANSI TR 31004 : 2014 RISK MANAGEMENT - GUIDANCE FOR THE IMPLEMENTATION OF ISO 31000
CSA B480 :2002 CUSTOMER SERVICE STANDARD FOR PEOPLE WITH DISABILITIES
CSA ISO/IEC 14598-4 : 2002 : R2010 SOFTWARE ENGINEERING - PRODUCT EVALUATION - PART 4: PROCESS FOR ACQUIRERS
CSA Z11140.1 : 2007 : R2012 STERILIZATION OF HEALTH CARE PRODUCTS - CHEMICAL INDICATORS - PART 1: GENERAL REQUIREMENTS
CSA Z11137-3 : 2007 : R2012 : FR STERILIZATION OF HEALTH CARE PRODUCTS - RADIATION - PART 3: GUIDANCE ON DOSIMETRIC ASPECTS
UNE-ISO 19600:2015 Compliance management systems. Guidelines.
UNE-ISO 17258:2017 Statistical methods -- Six Sigma -- Basic criteria underlying benchmarking for Six Sigma in organizations
IEEE 26513-2010 IEEE Standard for Adoption of ISO/IEC 26513:2009 Systems and Software Engineering--Requirements for Testers and Reviewers of Documentation
SAE AMS 7002 : 2018 PROCESS REQUIREMENTS FOR PRODUCTION OF METAL POWDER FEEDSTOCK FOR USE IN ADDITIVE MANUFACTURING OF AEROSPACE PARTS
CSA ISO TR 14062 : 2003 ENVIRONMENTAL MANAGEMENT - INTEGRATING ENVIRONMENTAL ASPECTS INTO PRODUCT DESIGN AND DEVELOPMENT
AAMI ISO 11607-1 : 2006 PACKAGING FOR TERMINALLY STERILIZED MEDICAL DEVICES - PART 1: REQUIREMENTS FOR MATERIALS, STERILE BARRIER SYSTEMS, AND PACKAGING SYSTEMS
API Q1 PORTUGUESE : 2013 SPECIFICATION FOR QUALITY MANAGEMENT SYSTEM REQUIREMENTS FOR MANUFACTURING ORGANIZATIONS FOR THE PETROLEUM AND NATURAL GAS INDUSTRY
PREN 4700-005 : 200P2 AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 005: FORGING STOCK
PREN 9137 : 200P1 QUALITY MANAGEMENT SYSTEMS - GUIDANCE FOR THE APPLICATION OF AQAP 2110 WITHIN AN EN 9100 QUALITY MANAGEMENT SYSTEM
TR 9135 : 1 AEROSPACE SERIES - QUALITY SYSTEMS - SPECIFIC QUALITY REQUIREMENTS FOR NATO SUPPLIERS
UNI EN 12273 : 2008 SLURRY SURFACING - REQUIREMENTS
UNI ISO 7240-19 : 2010 FIRE DETECTION AND ALARM SYSTEMS - PART 19: DESIGN, INSTALLATION, COMMISSIONING AND SERVICE OF SOUND SYSTEMS FOR EMERGENCY PURPOSES
CSA Z662.1 : 2013 COMMENTARY ON CSA Z662-07, OIL AND GAS PIPELINE SYSTEMS
ASTM F 1472 : 2014 : REDLINE Standard Specification for Wrought Titanium-6Aluminum-4Vanadium Alloy for Surgical Implant Applications (UNS R56400)
S.R. CEN ISO/TS 13972:2015 HEALTH INFORMATICS - DETAILED CLINICAL MODELS, CHARACTERISTICS AND PROCESSES (ISO/TS 13972:2015)
ISO/IEC 29110-3-2:2018 Systems and software engineering — Lifecycle profiles for Very Small Entities (VSEs) — Part 3-2: Conformity certification scheme
ASTM F 90 : 2014 : REDLINE Standard Specification for Wrought Cobalt-20Chromium-15Tungsten-10Nickel Alloy for Surgical Implant Applications (UNS R30605)
TR 3040-1 : 5 AEROSPACE SERIES - QUALITY ASSURANCE - EN AEROSPACE PRODUCTS - PART 1 - LIST OF APPROVED MANUFACTURERS
PREN 4700-003 : 200P2 AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 003: TUBE
PREN 9000-1 : 200P3 AEROSPACE SERIES - AEROSPACE INDUSTRY QUALITY SYSTEM - PART 1: REQUIREMENTS APPLICABLE TO SUPPLIERS
ISO 45001:2018 Occupational health and safety management systems — Requirements with guidance for use
SAE AS 9006 : 2013 DELIVERABLE AEROSPACE SOFTWARE SUPPLEMENT FOR AS9100A - QUALITY MANAGEMENT SYSTEMS - AEROSPACE - REQUIREMENTS FOR SOFTWARE
DIN EN ISO 3183:2013-03 PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL PIPE FOR PIPELINE TRANSPORTATION SYSTEMS (ISO 3183:2012)
PREN 4700-006 : 200P2 AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 006: PRE-PRODUCTION AND PRODUCTION FORGINGS
ISO 11737-1:2018 Sterilization of health care products — Microbiological methods — Part 1: Determination of a population of microorganisms on products
ASTM F 3273 : 2017 Standard Specification for Wrought Molybdenum-47.5 Rhenium Alloy for Surgical Implants (UNS R03700)
ISO 8873-2:2007 Rigid cellular plastics Spray-applied polyurethane foam for thermal insulation Part 2: Application
I.S. EN 16582-2:2015 DOMESTIC SWIMMING POOLS - PART 2: SPECIFIC REQUIREMENTS INCLUDING SAFETY AND TEST METHODS FOR INGROUND POOLS
TR 9109 : 1 AEROSPACE SERIES - GUIDELINES FOR SOFTWARE QUALITY MANAGEMENT
ISO 9000-2:1997 Quality management and quality assurance standards — Part 2: Generic guidelines for the application of ISO 9001, ISO 9002 and ISO 9003
I.S. EN 16590-1:2014 TRACTORS AND MACHINERY FOR AGRICULTURE AND FORESTRY - SAFETY - RELATED PARTS OF CONTROL SYSTEMS - PART 1: GENERAL PRINCIPLES FOR DESIGN AND DEVELOPMENT (ISO 25119-1:2010 MODIFIED)
ISO 8402:1994 Quality management and quality assurance — Vocabulary
S.R. CLC/TS 50537-3:2010 RAILWAY APPLICATIONS - MOUNTED PARTS OF THE TRACTION TRANSFORMER AND COOLING SYSTEM - PART 3: WATER PUMP FOR TRACTION CONVERTERS
EN 13411-7:2006+A1:2008 Terminations for steel wire ropes - Safety - Part 7: Symmetric wedge socket
IWA 1:2005 Quality management systems Guidelines for process improvements in health service organizations
PREN 54-12 : DRAFT 2009 FIRE DETECTION AND FIRE ALARM SYSTEMS - PART 12: SMOKE DETECTORS - LINE DETECTORS USING AN OPTICAL BEAM
ISO 16831:2012 Non-destructive testing — Ultrasonic testing — Characterization and verification of ultrasonic thickness measuring equipment
CEI EN 50155 : 2008 RAILWAY APPLICATIONS - ELECTRONIC EQUIPMENT USED ON ROLLING STOCK
I.S. EN 16497-2:2017 CHIMNEYS - CONCRETE SYSTEM CHIMNEYS - PART 2: BALANCED FLUE APPLICATIONS
I.S. EN 74-2:2008 COUPLERS, SPIGOT PINS AND BASEPLATES FOR USE IN FALSEWORK AND SCAFFOLDS - PART 2: SPECIAL COUPLERS - REQUIREMENTS AND TEST PROCEDURES
CEI UNI EN 45510-5-4 : 2000 GUIDE FOR PROCUREMENT OF POWER STATION EQUIPMENT - PART 5-4: HYDRAULIC TURBINES, STORAGE PUMPS AND PUMP-TURBINES
ISO 12319:2006 Aerospace 'P' (loop style) clamps Procurement specification
GOST R ISO/TR 10014 : 2005 GUIDELINES FOR MANAGING THE ECONOMICS OF QUALITY
I.S. EN 60694:1999 COMMON SPECIFICATIONS FOR HIGH-VOLTAGE SWITCHGEAR AND CONTROLGEAR STANDARDS
AQAP 110 : 2 NATO QUALITY ASSURANCE REQUIREMENTS FOR DESIGN, DEVELOPMENT AND PRODUCTION
I.S. EN 16747:2015 MARITIME AND PORT SECURITY SERVICES
CAN/CSA-ISO/IEC/IEEE 24748-4:18 Systems and software engineering — Life cycle management — Part 4: Systems engineering planning (Adopted ISO/IEC/IEEE 24748-4:2016, first edition, 2016-05-15)
I.S. EN 61478:2002 LIVE WORKING - LADDERS OF INSULATING MATERIAL
I.S. EN 1090-1:2009 EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 1: REQUIREMENTS FOR CONFORMITY ASSESSMENT OF STRUCTURAL COMPONENTS
I.S. EN 15345:2007 PLASTICS - RECYCLED PLASTICS - CHARACTERISATION OF POLYPROPYLENE (PP) RECYCLATES
I.S. EN 15267-2:2009 AIR QUALITY - CERTIFICATION OF AUTOMATED MEASURING SYSTEMS - PART 2: INITIAL ASSESSMENT OF THE AMS MANUFACTURER'S QUALITY MANAGEMENT SYSTEM AND POST CERTIFICATION SURVEILLANCE FOR THE MANUFACTURING PROCESS
ISO/IEC 19796-3:2009 Information technology — Learning, education and training — Quality management, assurance and metrics — Part 3: Reference methods and metrics
18/30368654 DC : 0 BS EN 488 - DISTRICT HEATING PIPES - BONDED SINGLE PIPE SYSTEMS FOR DIRECTLY BURIED HOT WATER NETWORKS - FACTORY MADE STEEL VALVE ASSEMBLY FOR STEEL SERVICE PIPES, POLYURETHANE THERMAL INSULATION AND A CASING OF POLYETHYLENE
I.S. EN 61174:2015 MARITIME NAVIGATION AND RADIOCOMMUNICATION EQUIPMENT AND SYSTEMS - ELECTRONIC CHART DISPLAY AND INFORMATION SYSTEM (ECDIS) - OPERATIONAL AND PERFORMANCE REQUIREMENTS, METHODS OF TESTING AND REQUIRED TEST RESULTS
I.S. EN 15927:2010 SERVICES OFFERED BY HEARING AID PROFESSIONALS
I.S. EN 12273:2008 SLURRY SURFACING - REQUIREMENTS
AWS B5.1 : 2013 SPECIFICATION FOR THE QUALIFICATION OF WELDING INSPECTORS
I.S. EN 15358:2011 SOLID RECOVERED FUELS - QUALITY MANAGEMENT SYSTEMS - PARTICULAR REQUIREMENTS FOR THEIR APPLICATION TO THE PRODUCTION OF SOLID RECOVERED FUELS
SAE AS 9110 : 2016 QUALITY MANAGEMENT SYSTEMS - REQUIREMENTS FOR AVIATION MAINTENANCE ORGANIZATIONS
ISO/TS 20658:2017 Medical laboratories — Requirements for collection, transport, receipt, and handling of samples
PREN 13967 : DRAFT 2011 FLEXIBLE SHEETS FOR WATERPROOFING - PLASTIC AND RUBBER DAMP PROOF SHEETS INCLUDING PLASTIC AND RUBBER BASEMENT TANKING SHEET - DEFINITIONS AND CHARACTERISTICS
I.S. EN ISO 6789-1:2017 ASSEMBLY TOOLS FOR SCREWS AND NUTS - HAND TORQUE TOOLS - PART 1: REQUIREMENTS AND METHODS FOR DESIGN CONFORMANCE TESTING AND QUALITY CONFORMANCE TESTING: MINIMUM REQUIREMENTS FOR DECLARATION OF CONFORMANCE (ISO 6789-1:2017)
BS EN ISO 7396-1:2016 Medical gas pipeline systems Pipeline systems for compressed medical gases and vacuum
S.R. CEN TS 15399:2007 GAS SUPPLY SYSTEMS - GUIDELINES FOR MANAGEMENT SYSTEMS FOR GAS DISTRIBUTION NETWORK
IEEE/ISO/IEC 14764-2006 ISO/IEC/IEEE International Standard for Software Engineering - Software Life Cycle Processes - Maintenance
CEI EN 60746-1 : 2003 EXPRESSION OF PERFORMANCE OF ELECTROCHEMICAL ANALYZERS - PART 1: GENERAL
CEI CLC/TS 50537-2 : 2011 RAILWAY APPLICATIONS - MOUNTED PARTS OF THE TRACTION TRANSFORMER AND COOLING SYSTEM - PART 2: PUMP FOR INSULATING LIQUID FOR TRACTION TRANSFORMERS AND REACTORS
S.R. CEN ISO/TR 24094:2007 ANALYSIS OF NATURAL GAS - VALIDATION METHODS FOR GASEOUS REFERENCE MATERIALS
S.R. CEN/TS 1566-2:2012 PLASTICS PIPING SYSTEMS FOR SOIL AND WASTE DISCHARGE (LOW AND HIGH TEMPERATURE) WITHIN THE BUILDING STRUCTURE - CHLORINATED POLY(VINYL CHLORIDE) (PVC-C) - PART 2: GUIDANCE FOR ASSESSMENT OF CONFORMITY
DIN EN 13310:2015-09 KITCHEN SINKS - FUNCTIONAL REQUIREMENTS AND TEST METHODS
I.S. EN 62430:2009 ENVIRONMENTALLY CONSCIOUS DESIGN FOR ELECTRICAL AND ELECTRONIC PRODUCTS
BS EN 60079-19 : 2011 EXPLOSIVE ATMOSPHERES - PART 19: EQUIPMENT REPAIR, OVERHAUL AND RECLAMATION
BS EN 14353 : 2007 METAL BEADS AND FEATURE PROFILES FOR USE WITH GYPSUM PLASTERBOARDS - DEFINITIONS, REQUIREMENTS AND TEST METHODS
I.S. EN ISO 3691-6:2015 INDUSTRIAL TRUCKS - SAFETY REQUIREMENTS AND VERIFICATION - PART 6: BURDEN AND PERSONNEL CARRIERS (ISO 3691-6:2013)
ISO 15348:2002 Pipework Metal bellows expansion joints General
I.S. EN 13282-3:2015 HYDRAULIC ROAD BINDERS - PART 3: CONFORMITY EVALUATION
AAMI ISO 13408-3:2006 ASEPTIC PROCESSING OF HEALTH CARE PRODUCTS - PART 3: LYOPHILIZATION
ANSI/AAMI/ISO 11135:2014 STERILIZATION OF HEALTH CARE PRODUCTS - ETHYLENE OXIDE - REQUIREMENTS FOR DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES
I.S. EN 16853:2017 CONSERVATION OF CULTURAL HERITAGE - CONSERVATION PROCESS - DECISION MAKING, PLANNING AND IMPLEMENTATION
I.S. CEN TR 15472:2006 POSTAL SERVICES - MEASUREMENT OF TRANSIT TIMES FOR PARCELS BY THE USE OF A TRACK AND TRACE SYSTEM
I.S. EN 61069-8:2016 INDUSTRIAL-PROCESS MEASUREMENT, CONTROL AND AUTOMATION - EVALUATION OF SYSTEM PROPERTIES FOR THE PURPOSE OF SYSTEM ASSESSMENT - PART 8: ASSESSMENT OF OTHER SYSTEM PROPERTIES
I.S. EN ISO 11133:2014 MICROBIOLOGY OF FOOD, ANIMAL FEED AND WATER - PREPARATION, PRODUCTION, STORAGE AND PERFORMANCE TESTING OF CULTURE MEDIA (ISO/DIS 11133:2012)
I.S. EN 61479:2001 LIVE WORKING - FLEXIBLE CONDUCTOR COVERS (LINE HOSES) OF INSULATING MATERIAL
I.S. EN 12566-7:2016 SMALL WASTEWATER TREATMENT SYSTEMS FOR UP TO 50 PT - PART 7: PREFABRICATED TERTIARY TREATMENT UNITS
CSA C61400-2:2008 WIND TURBINES - PART 2: DESIGN REQUIREMENTS FOR SMALL WIND TURBINES
S.R. CLC/TS 50537-2:2010 RAILWAY APPLICATIONS - MOUNTED PARTS OF THE TRACTION TRANSFORMER AND COOLING SYSTEM - PART 2: PUMP FOR INSULATING LIQUID FOR TRACTION TRANSFORMERS AND REACTORS
ISO/IEC 29155-1:2017 Systems and software engineering — Information technology project performance benchmarking framework — Part 1: Concepts and definitions
BS EN 50575 : 2014 POWER, CONTROL AND COMMUNICATION CABLES - CABLES FOR GENERAL APPLICATIONS IN CONSTRUCTION WORKS SUBJECT TO REACTION TO FIRE REQUIREMENTS
I.S. EN 61192-1:2003 WORKMANSHIP REQUIREMENTS FOR SOLDERED ELECTRONIC ASSEMBLIES - GENERAL
IWA 4:2009 Quality management systems Guidelines for the application of ISO 9001:2008 in local government
BS EN 16153 : 2013 LIGHT TRANSMITTING FLAT MULTIWALL POLYCARBONATE (PC) SHEETS FOR INTERNAL AND EXTERNAL USE IN ROOFS, WALLS AND CEILINGS - REQUIREMENTS AND TEST METHODS
I.S. EN 12467:2012 FIBRE-CEMENT FLAT SHEETS - PRODUCT SPECIFICATION AND TEST METHODS
I.S. EN 1474-3:2008 INSTALLATION AND EQUIPMENT FOR LIQUEFIED NATURAL GAS - DESIGN AND TESTING OF MARINE TRANSFER SYSTEMS - PART 3: OFFSHORE TRANSFER SYSTEMS
ISO 3999-1:2000 Radiation protection Apparatus for industrial gamma radiography Part 1: Specifications for performance, design and tests
BS EN 50341-1:2012 Overhead electrical lines exceeding AC 1 kV General requirements. Common specifications
I.S. EN 2755:2009 AEROSPACE SERIES - BEARINGS, SPHERICAL PLAIN IN CORROSION RESISTING STEEL WITH SELF-LUBRICATING LINER - ELEVATED LOAD AT AMBIENT TEMPERATURE - TECHNICAL SPECIFICATION
I.S. EN 13565-1:2004 FIXED FIREFIGHTING SYSTEMS - FOAM SYSTEMS - PART 1: REQUIREMENTS AND TEST METHODS FOR COMPONENTS
ISEA 125 : 2014 CONFORMITY ASSESSMENT OF SAFETY AND PERSONAL PROTECTIVE EQUIPMENT
I.S. CR 14269:2001 CHEMICALS USED FOR TREATMENT OF WATER INTENDED FOR HUMAN CONSUMPTION - GUIDELINES FOR THE PURCHASE
I.S. CLC/TS 61112:2006 BLANKETS OF INSULATING MATERIAL FOR ELECTRICAL PURPOSES
I.S. EN 4132:2009 AEROSPACE SERIES - BOLTS, NORMAL HEXAGONAL HEAD, COARSE TOLERANCE NORMAL SHANK, LONG THREAD, IN ALLOY STEEL, CADMIUM PLATED - CLASSIFICATION: 1100 MPA (AT AMBIENT TEMPERATURE)/235 DEGREES C
ISO 6966-2:2014 Aircraft ground equipment — Basic requirements — Part 2: Safety requirements
UNE-EN ISO 14253-2:2012 Geometrical product specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Part 2: Guidance for the estimation of uncertainty in GPS measurement, in calibration of measuring equipment and in product verification (ISO 14253-2:2011)
ISO/IEC 26513:2009 Systems and software engineering - Requirements for testers and reviewers of user documentation
ISO/IEC Guide 68:2002 Arrangements for the recognition and acceptance of conformity assessment results
AAMI IEC 62366-1 : 2015 MEDICAL DEVICES - PART 1: APPLICATION OF USABILITY ENGINEERING TO MEDICAL DEVICES
ISO 9003:1994 Quality systems Model for quality assurance in final inspection and test
ISO 20683-2:2016 Aircraft ground equipment Design, testing and maintenance requirements for nose gear towbarless towing vehicle (TLTV) Part 2: Regional aircraft
ISO/PAS 17005:2008 Conformity assessment Use of management systems Principles and requirements
BS EN 62246-2:2008 Reed contact units Heavy-duty reed switches
PREN 15650 : DRAFT 2017 VENTILATION FOR BUILDINGS - FIRE DAMPERS
ISO 7076-6:2016 Fire protection — Foam fire extinguishing systems — Part 6: Vehicle mounted compressed air foam systems
UNI CEI ISO/IEC 17007 : 2010 CONFORMITY ASSESSMENT - GUIDANCE FOR DRAFTING NORMATIVE DOCUMENTS SUITABLE FOR USE FOR CONFORMITY ASSESSMENT
UNI EN ISO 13174 : 2013 CATHODIC PROTECTION OF HARBOUR INSTALLATIONS
SAE AS 6081 : 2012 FRAUDULENT/COUNTERFEIT ELECTRONIC PARTS: AVOIDANCE, DETECTION, MITIGATION, AND DISPOSITION - DISTRIBUTORS
I.S. EN 16590-4:2014 TRACTORS AND MACHINERY FOR AGRICULTURE AND FORESTRY - SAFETY-RELATED PARTS OF CONTROL SYSTEMS - PART 4: PRODUCTION, OPERATION, MODIFICATION AND SUPPORTING PROCESSES (ISO 25119-4:2010 MODIFIED)
ISO/IEC TS 17022:2012 Conformity assessment Requirements and recommendations for content of a third-party audit report on management systems
UNI EN 74-2 : 2009 COUPLERS, SPIGOT PINS AND BASEPLATES FOR USE IN FALSEWORK AND SCAFFOLDS - PART 2: SPECIAL COUPLERS - REQUIREMENTS AND TEST PROCEDURES
UNI EN 16034 : 2014 PEDESTRIAN DOORSETS, INDUSTRIAL, COMMERCIAL, GARAGE DOORS AND OPENABLE WINDOWS - PRODUCT STANDARD, PERFORMANCE CHARACTERISTICS - FIRE RESISTING AND/OR SMOKE CONTROL CHARACTERISTICS
ISO 16142-2:2017 Medical devices — Recognized essential principles of safety and performance of medical devices — Part 2: General essential principles and additional specific essential principles for all IVD medical devices and guidance on the selection of standards
ISO 2230:2002 Rubber products — Guidelines for storage
UNI EN ISO 13408-6 : 2013 ASEPTIC PROCESSING OF HEALTH CARE PRODUCTS - PART 6: ISOLATOR SYSTEMS
CSA LNG 2-2017 LIQUEFIED NATURAL GAS VEHICLE FUEL CONTAINERS
UNI EN 15267-1 : 2009 AIR QUALITY - CERTIFICATION OF AUTOMATED MEASURING SYSTEMS - PART 1: GENERAL PRINCIPLES
I.S. EN 124-5:2015 GULLY TOPS AND MANHOLE TOPS FOR VEHICULAR AND PEDESTRIAN AREAS - PART 5: GULLY TOPS AND MANHOLE TOPS MADE OF COMPOSITE MATERIALS
NF ISO 6966-2 : 2006 AIRCRAFT GROUND EQUIPMENT - BASIC REQUIREMENTS - PART 2: SAFETY REQUIREMENTS
ISO 21927-1:2008 Smoke and heat control systems — Part 1: Specification for smoke barriers
DIN EN 997:2015-09 WC PANS AND WC SUITES WITH INTEGRAL TRAP
EN 15102:2007+A1:2011 Decorative wall coverings - Roll and panel form
BS EN 62402:2007 Obsolescence management. Application guide
ISO/TS 19158:2012 Geographic information — Quality assurance of data supply
CSA Z17665-1 : 2009 : FR STERILIZATION OF HEALTH CARE PRODUCTS - MOIST HEAT - PART 1: REQUIREMENTS FOR THE DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES
ISO/TR 14062:2002 Environmental management Integrating environmental aspects into product design and development
I.S. EN 14527:2016 SHOWER TRAYS FOR DOMESTIC PURPOSES
UNE-EN 16001:2010 Energy management systems - Requirements with guidance for use
ISO 13448-2:2004 Acceptance sampling procedures based on the allocation of priorities principle (APP) Part 2: Coordinated single sampling plans for acceptance sampling by attributes
ISO/TR 10013:2001 Guidelines for quality management system documentation
DIN EN 12845:2016-04 FIXED FIREFIGHTING SYSTEMS - AUTOMATIC SPRINKLER SYSTEMS - DESIGN, INSTALLATION AND MAINTENANCE
EI 1550 : 2014 HANDBOOK ON EQUIPMENT USED FOR THE MAINTENANCE AND DELIVERY OF CLEAN AVIATION FUEL
UNE-EN 15512:2010 Steel static storage systems - Adjustable pallet racking systems - Principles for structural design
ISO/IEC/IEEE 15939:2017 Systems and software engineering — Measurement process
UNI/TR 11510 : 2013 Nuclear plants - Particular requirements for the application of UNI EN ISO 9001: 2008 in the nuclear field
PD ISO/TS 9002:2016 Quality management systems. Guidelines for the application of ISO 9001:2015
I.S. EN ISO 13628-15:2011 PETROLEUM AND NATURAL GAS INDUSTRIES - DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - PART 15: SUBSEA STRUCTURES AND MANIFOLDS (ISO 13628-15:2011)
S.R. CEN/TS 1329-2:2012 PLASTICS PIPING SYSTEMS FOR SOIL AND WASTE DISCHARGE (LOW AND HIGH TEMPERATURE) WITHIN THE BUILDING STRUCTURE - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) - PART 2: GUIDANCE FOR THE ASSESSMENT OF CONFORMITY
IEC 60494-1:2013 Railway applications - Rolling stock - Pantographs - Characteristics and tests - Part 1: Pantographs for main line vehicles
DEFSTAN 00-55(PT1)/2(1997) : 1997 REQUIREMENTS FOR SAFETY RELATED SOFTWARE IN DEFENCE EQUIPMENT - PART 1: REQUIREMENTS
DIN EN 14428:2015-09 SHOWER ENCLOSURES - FUNCTIONAL REQUIREMENTS AND TEST METHODS
I.S. EN 62155:2003 HOLLOW PRESSURIZED AND UNPRESSURIZED CERAMIC AND GLASS INSULATORS FOR USE IN ELECTRICAL EQUIPMENT WITH RATED VOLTAGES GREATER THAN 1000 V
ISO 37101:2016 Sustainable development in communities — Management system for sustainable development — Requirements with guidance for use
UNE-EN 74-2:2010 Couplers, spigot pins and baseplates for use in falsework and scaffolds - Part 2: Special couplers - Requirements and test procedures
UNE-EN 16397-2:2015 Flexible couplings - Part 2: Characteristics and testing for metal banded flexible couplings, adaptors and bushes
UNI EN ISO 19011 : 2012 GUIDELINES FOR AUDITING MANAGEMENT SYSTEMS
CEI UNI EN ISO/IEC 17025 : 2008 GENERAL REQUIREMENTS FOR THE COMPETENCE OF TESTING AND CALIBRATION LABORATORIES
EN 1400:2013+A1:2014 Child use and care articles - Soothers for babies and young children - Safety requirements and test methods
DIN EN 14811 E : 2010 RAILWAY APPLICATIONS - TRACK - SPECIAL PURPOSE RAIL - GROOVED AND ASSOCIATED CONSTRUCTION
DIN EN ISO 50001 E : 2011 ENERGY MANAGEMENT SYSTEMS - REQUIREMENTS WITH GUIDANCE FOR USE (ISO 50001:2011)
17/30356734 DC : 0 BS EN 14236 - ULTRASONIC DOMESTIC GAS METERS
CEI EN 60794-4-20 : 2013 OPTICAL FIBRE CABLES - PART 4-20: AERIAL OPTICAL CABLES ALONG ELECTRICAL POWER LINES - FAMILY SPECIFICATION FOR ADSS (ALL DIELECTRIC SELF SUPPORTED) OPTICAL CABLES
BS EN 16910-1:2018 Railway applications. Rolling stock. Requirements for non-destructive testing on running gear in railway maintenance Wheelsets
I.S. CLC TS 50502:2007 RAILWAY APPLICATIONS - ROLLING STOCK - ELECTRIC EQUIPMENT IN TROLLEY BUSES - SAFETY REQUIREMENTS AND CONNECTION SYSTEMS
EN ISO 13485:2016/AC:2018 MEDICAL DEVICES - QUALITY MANAGEMENT SYSTEMS - REQUIREMENTS FOR REGULATORY PURPOSES (ISO 13485:2016)
DD CEN/TS 14632:2006 Plastics piping systems for drainage, sewerage and water supply, pressure and non-pressure. Glass-reinforced thermosetting plastics (GRP) based on polyester resin (UP). Guidance for the assessment of conformity
I.S. CEN/TR 14585-2:2006 CORRUGATED METAL HOSE ASSEMBLIES FOR PRESSURE APPLICATIONS - PART 2: GUIDANCE ON THE USE OF CONFORMITY ASSESSMENT PROCEDURES
I.S. EN 16590-2:2014 TRACTORS AND MACHINERY FOR AGRICULTURE AND FORESTRY - SAFETY-RELATED PARTS OF CONTROL SYSTEMS - PART 2: CONCEPT PHASE (ISO 25119-2:2010 MODIFIED)
14/30274689 DC : 0 BS EN 54-20 - FIRE DETECTION AND FIRE ALARM SYSTEMS - PART 20: ASPIRATING SMOKE DETECTORS
UNI EN 15234-1 : 2011 SOLID BIOFUELS - FUEL QUALITY ASSURANCE - PART 1: GENERAL REQUIREMENTS
UNI CEN ISO/TS 15877-7 : 2009 PLASTICS PIPING SYSTEMS FOR HOT AND COLD WATER INSTALLATIONS - CHLORINATED POLY(VINYL CHLORIDE) (PVC-C) - PART 7: GUIDANCE FOR THE ASSESSMENT OF CONFORMITY
14/30295898 DC : 0 BS EN 14904 - SURFACES FOR SPORTS AREAS - INDOOR SURFACES FOR MULTI-SPORTS USE - SPECIFICATION
UNE-EN 15824:2017 Specifications for external renders and internal plasters based on organic binders
NASA-STD-8739.12:2018 METROLOGY & CALIBRATION
AAMI ISO 11137-1:2006 STERILIZATION OF HEALTH CARE PRODUCTS - RADIATION - PART 1: REQUIREMENTS FOR THE DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES
ASTM F 1470 : 2018 : REDLINE Standard Practice for Fastener Sampling for Specified Mechanical Properties and Performance Inspection
UNE-EN ISO 11607-1:2017 Packaging for terminally sterilized medical devices - Part 1: Requirements for materials, sterile barrier systems and packaging systems (ISO 11607-1:2006, including Amd 1:2014)
17/30357407 DC : 0 BS EN 997 - WC PANS AND WC SUITES WITH INTEGRAL TRAP
17/30360105 DC : 0 BS EN 1748-1-2 - GLASS IN BUILDING - SPECIAL BASIC PRODUCTS - BOROSILICATE FLOAT GLASS - PART 1-2: PRODUCT STANDARD
I.S. EN 62246-2:2008 REED CONTACT UNITS - PART 2: HEAVY-DUTY REED SWITCHES
I.S. EN 15382:2013 GEOSYNTHETIC BARRIERS - CHARACTERISTICS REQUIRED FOR USE IN TRANSPORTATION INFRASTRUCTURE
UNI CEN ISO/TS 22391-7 : 2012 PLASTICS PIPING SYSTEMS FOR HOT AND COLD WATER INSTALLATIONS - POLYETHYLENE OF RAISED TEMPERATURE RESISTANCE (PE-RT) - PART 7: GUIDANCE FOR THE ASSESSMENT OF CONFORMITY
EN 13491:2018 Geosynthetic barriers - Characteristics required for use in the construction of tunnels and associated underground structures
ASTM F 2181 : 2014 : REDLINE Standard Specification for Wrought Seamless Stainless Steel Tubing for Surgical Implants
UNI EN 1279-5 : 2010 GLASS IN BUILDING - INSULATING GLASS UNITS - PART 5: EVALUATION OF CONFORMITY
ASTM F 3213 : 2017 Standard for Additive Manufacturing – Finished Part Properties – Standard Specification for Cobalt-28 Chromium-6 Molybdenum via Powder Bed Fusion
UNE-CEN/TR 14383-2:2011 IN Prevention of crime - Urban planning and building design - Part 2: Urban planning
UNI EN 9120 : 2010 QUALITY MANAGEMENT SYSTEMS - REQUIREMENTS FOR AVIATION, SPACE AND DEFENCE DISTRIBUTORS
SAE AIR 6170 : 2017 ICE MELTING TEST METHOD FOR RUNWAYS AND TAXIWAYS DEICING/ANTI-ICING CHEMICALS
BS EN 12566-6:2013 Small wastewater treatment systems for up to 50 PT Prefabricated treatment units for septic tank effluent
UNI EN 1090-1 : 2012 EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 1: REQUIREMENTS FOR CONFORMITY ASSESSMENT OF STRUCTURAL COMPONENTS
CCS GUIDE FOR SAFETY AND RELIABILITY : 2017 GUIDE FOR SAFETY AND RELIABILITY ASSESSMENT FOR SHIPBOARD SOFTWARE
UNE-ISO 39001:2013 Road traffic safety (RTS) management systems - Requirements with guidance for use
ASTM F 2070 : 2000 : R2006 Standard Specification for Transducers, Pressure and Differential, Pressure, Electrical and Fiber-Optic
NF EN 3389 : 2009 AEROSPACE SERIES - FASTENERS, EXTERNALLY THREADED, IN HEAT RESISTING NICKEL BASE ALLOY NI-PH1302 (WASPALOY) - CLASSIFICATION: 1210 MPA/730 DEGREES C - MANUFACTURING METHOD OPTIONAL - TECHNICAL SPECIFICATION
DEFSTAN 05-122/2(2000) : 2000 PROCEDURAL REQUIREMENTS FOR MILITARY AIRCRAFT REGISTRATION OF PARTICULAR CIVIL-OWNED MILITARY TYPE AIRCRAFT (COMA)
API 15S : 2016 SPOOLABLE REINFORCED PLASTIC LINE PIPE
ASTM F 1718 : 2001 : R2019 Standard Specification for Rotary Positive Displacement Distillate Fuel Pumps
CEI EN 50215 : 2011 RAILWAY APPLICATIONS - ROLLING STOCK - TESTING OF ROLLING STOCK ON COMPLETION OF CONSTRUCTION AND BEFORE ENTRY INTO SERVICE
CSA ISO 10012-1 : 0 QUALITY ASSURANCE REQUIREMENTS FOR MEASURING EQUIPMENT - PART 1: METROLOGICAL CONFIRMATION SYSTEM FOR MEASURING EQUIPMENT
CSA Z364.1.1-Z364.1.2 : 0 HAEMODIALYZERS, HAEMOFILTERS, AND HAEMOCONCENTRATORS/EXTRACORPOREAL BLOOD CIRCUIT FOR HAEMODIALYZERS, HAEMOFILTERS, AND HAEMOCONCENTRATORS
UNI EN 15682-2 : 2013 GLASS IN BUILDING - HEAT SOAKED THERMALLY TOUGHENED ALKALINE EARTH SILICATE SAFETY GLASS - PART 2: EVALUATION OF CONFORMITY/PRODUCT STANDARD
UNI EN ISO 14051 : 2011 ENVIRONMENTAL MANAGEMENT - MATERIAL FLOW COST ACCOUNTING - GENERAL FRAMEWORK
ASTM F 2071 : 2000 : R2017 Standard Specification for Switch, Position Proximity (Noncontact) or Limit (Mechanical Contact), Fiber-Optic
ASTM D 5330/D5330M : 2006 Standard Specification for Pressure-Sensitive Tape for Packaging, Filament-Reinforced
UNI EN 1457-1 : 2012 CHIMNEYS - CLAY/CERAMIC FLUE LINERS - PART 1: FLUE LINERS OPERATING UNDER DRY CONDITIONS - REQUIREMENTS AND TEST METHODS
NF EN 50238 : 2003 RAILWAY APPLICATIONS - COMPATIBILITY BETWEEN ROLLING STOCK AND TRAIN DETECTION SYSTEMS
UNI CEN/TR 15545 : 2007 GUIDE TO THE USE OF EN 545
ASTM F 2444 : 2004 Standard Practice for Damage Prevention of Bearings, and Bearing Components Through Proper Handling Techniques
I.S. EN 1591-4:2013 FLANGES AND THEIR JOINTS - PART 4: QUALIFICATION OF PERSONNEL COMPETENCY IN THE ASSEMBLY OF THE BOLTED CONNECTIONS OF CRITICAL SERVICE PRESSURIZED SYSTEMS
I.S. EN 14963:2006 ROOF COVERINGS - CONTINUOUS ROOFLIGHTS OF PLASTICS WITH OR WITHOUT UPSTANDS - CLASSIFICATION, REQUIREMENTS AND TEST METHODS
I.S. EN 15381:2008 GEOTEXTILES AND GEOTEXTILE-RELATED PRODUCTS - CHARACTERISTICS REQUIRED FOR USE IN PAVEMENTS AND ASPHALT OVERLAYS
DIN EN 1096-4:2015-06 (Draft) GLASS IN BUILDING - COATED GLASS - PART 4: EVALUATION OF CONFORMITY/PRODUCT STANDARD
ASTM F 799 : 2011 : REDLINE SPECIFICATION FOR COBALT-28CHROMIUM-6MOLYBDENUM ALLOY FORGINGS FOR SURGICAL IMPLANTS (UNS R31537, R31538, R31539)
ASTM C 1533 : 2015 : REDLINE Standard Guide for General Design Considerations for Hot Cell Equipment
I.S. EN ISO 15423:2010 INFORMATION TECHNOLOGY - AUTOMATIC IDENTIFICATION AND DATA CAPTURE TECHNIQUES - BAR CODE SCANNER AND DECODER PERFORMANCE TESTING
I.S. CWA 14172-7:2004 EESSI CONFORMITY ASSESSMENT GUIDANCE - PART 7: CRYPTOGRAPHIC MODULES USED BY CERTIFICATION SERVICE PROVIDERS FOR SIGNING OPERATIONS AND KEY GENERATION SERVICES
I.S. ISO 9004-3:1994 QUALITY MANAGEMENT AND QUALITY SYSTEM ELEMENTS - PART 3: GUIDELINES FOR PROCESSED MATERIALS
API Q1 : 2013 SPECIFICATION FOR QUALITY MANAGEMENT SYSTEM REQUIREMENTS FOR MANUFACTURING ORGANIZATIONS FOR THE PETROLEUM AND NATURAL GAS INDUSTRY
I.S. CEN TS 15176:2006 EVALUATION OF CONFORMITY FOR FIXED FIREFIGHTING SYSTEMS STANDARDS
CSA ISO TR 31004 : 2014 RISK MANAGEMENT - GUIDANCE FOR THE IMPLEMENTATION OF ISO 31000
ISO/IEC TR 90005:2008 Systems engineering Guidelines for the application of ISO 9001 to system life cycle processes
EN 60079-19:2011/A1:2015 EXPLOSIVE ATMOSPHERES - PART 19: EQUIPMENT REPAIR, OVERHAUL AND RECLAMATION (IEC 60079-19:2010)
EN 15048-1:2016 Non-preloaded structural bolting assemblies - Part 1: General requirements
ISO 9940:2015 Aerospace series Fluid, hydraulic, phosphate ester-base, fire resistant Technical specification
ISO/IEC 90003:2014 Software engineering Guidelines for the application of ISO 9001:2008 to computer software
IEC 60748-23-1:2002 Semiconductor devices - Integrated circuits - Part 23-1: Hybrid integrated circuits and film structures - Manufacturing line certification - Generic specification
EN ISO/TS 15874-7 : 2003 PLASTICS PIPING SYSTEMS FOR HOT AND COLD WATER INSTALLATIONS - POLYPROPYLENE (PP) - PART 7: GUIDANCE FOR THE ASSESSMENT OF CONFORMITY
ASTM F 1713 : 2008 : R2013 Standard Specification for Wrought Titanium-13Niobium-13Zirconium Alloy for Surgical Implant Applications (UNS R58130)
ASTM F 2044 : 2009 : R2013 Standard Specification for Liquid Level Indicating Equipment, Electrical
EN ISO 3834-1:2005 Quality requirements for fusion welding of metallic materials - Part 1: Criteria for the selection of the appropriate level of quality requirements (ISO 3834-1:2005)
ISO/IEC 25000:2014 Systems and software engineering Systems and software Quality Requirements and Evaluation (SQuaRE) Guide to SQuaRE
ASTM F 1718 : 2001 : R2013 Standard Specification for Rotary Positive Displacement Distillate Fuel Pumps
IEC Q 03-4 : 3.0 IEC QUALITY ASSESSMENT SYSTEM FOR ELECTRONIC COMPONENTS (IECQ SYSTEM) - RULES OF PRODECURE - PART 4: IECQ AVIONICS SCHEME - AVIONICS PARTS AND ASSEMBLY MANAGEMENT
ASTM F 136 : 2013 : REDLINE Standard Specification for Wrought Titanium-6Aluminum-4Vanadium ELI (Extra Low Interstitial) Alloy for Surgical Implant Applications (UNS R56401)
ISO/IEC 17025:2017 General requirements for the competence of testing and calibration laboratories
IEC 62499:2008 Railway applications - Current collection systems - Pantographs, testing methods for carbon contact strips
ISO 14006:2011 Environmental management systems Guidelines for incorporating ecodesign
NFPA 1801 : 2018 THERMAL IMAGERS FOR THE FIRE SERVICE
NFPA 1953 : 2016 PROTECTIVE ENSEMBLES FOR CONTAMINATED WATER DIVING
NFPA 1952 : 2015 SURFACE WATER OPERATIONS PROTECTIVE CLOTHING AND EQUIPMENT
I.S. EN 14915:2013 SOLID WOOD PANELLING AND CLADDING - CHARACTERISTICS, EVALUATION OF CONFORMITY AND MARKING
EN 12167:2016 COPPER AND COPPER ALLOYS - PROFILES AND BARS FOR GENERAL PURPOSES
EN 545:2010 Ductile iron pipes, fittings, accessories and their joints for water pipelines - Requirements and test methods
EN 1263-1:2014 Temporary works equipment - Safety nets - Part 1: Safety requirements, test methods
NFPA 1977 : 2016 PROTECTIVE CLOTHING AND EQUIPMENT FOR WILDLAND FIRE FIGHTING
EN 12165:2016 COPPER AND COPPER ALLOYS - WROUGHT AND UNWROUGHT FORGING STOCK
I.S. EN 14382:2005 SAFETY DEVICES FOR GAS PRESSURE REGULATING STATIONS AND INSTALLATIONS - GAS SAFETY SHUT-OFF DEVICES FOR INLET PRESSURES UP TO 100 BAR
I.S. EN 14419:2009 DISTRICT HEATING PIPES - PREINSULATED BONDED PIPE SYSTEMS FOR DIRECTLY BURIED HOT WATER NETWORKS - SURVEILLANCE SYSTEMS
I.S. EN 488:2015 DISTRICT HEATING PIPES - PREINSULATED BONDED PIPE SYSTEMS FOR DIRECTLY BURIED HOT WATER NETWORKS - STEEL VALVE ASSEMBLY FOR STEEL SERVICE PIPES, POLYURETHANE THERMAL INSULATION AND OUTER CASING OF POLYETHYLENE
NFPA 1986 : 2017 RESPIRATORY PROTECTION EQUIPMENT FOR TACTICAL AND TECHNICAL OPERATIONS
EN 14915:2013+A1:2017 Solid wood panelling and cladding - Characteristics, requirements and marking
I.S. EN 12566-3:2016 SMALL WASTEWATER TREATMENT SYSTEMS FOR UP TO 50 PT - PART 3: PACKAGED AND/OR SITE ASSEMBLED DOMESTIC WASTEWATER TREATMENT PLANTS
DIN EN 12368:2015-09 TRAFFIC CONTROL EQUIPMENT - SIGNAL HEADS
I.S. EN 508-2:2008 ROOFING PRODUCTS FROM METAL SHEET - SPECIFICATION FOR SELFSUPPORTING PRODUCTS OF STEEL, ALUMINIUM OR STAINLESS STEEL SHEET - PART 2: ALUMINIUM
EN 9103:2014/AC:2015 AEROSPACE SERIES - QUALITY MANAGEMENT SYSTEMS - VARIATION MANAGEMENT OF KEY CHARACTERISTICS
I.S. EN 61191-2:2017 PRINTED BOARD ASSEMBLIES - PART 2: SECTIONAL SPECIFICATION - REQUIREMENTS FOR SURFACE MOUNT SOLDERED ASSEMBLIES
NFPA 11 : 2016 LOW-, MEDIUM-, AND HIGH-EXPANSION FOAM
I.S. EN 253:2009 DISTRICT HEATING PIPES - PREINSULATED BONDED PIPE SYSTEMS FOR DIRECTLY BURIED HOT WATER NETWORKS - PIPE ASSEMBLY OF STEEL SERVICE PIPE, POLYURETHANE THERMAL INSULATION AND OUTER CASING OF POLYETHYLENE
I.S. EN 448:2015 DISTRICT HEATING PIPES - PREINSULATED BONDED PIPE SYSTEMS FOR DIRECTLY BURIED HOT WATER NETWORKS - FITTING ASSEMBLIES OF STEEL SERVICE PIPES, POLYURETHANE THERMAL INSULATION AND OUTER CASING OF POLYETHYLENE
NFPA 1982 : 2018 Standard on Personal Alert Safety Systems (PASS)
NFPA 1964 : 2018 SPRAY NOZZLES
DIN EN 13341:2011-04 Static thermoplastic tanks for above ground storage of domestic heating oils, kerosene and diesel fuels - Blow moulded and rotationally moulded polyethylene tanks and rotationally moulded tanks made of anionically polymerized polyamide 6 - Requirements and test methods (includes Amendment A1:2011)
DIN EN ISO 11140-1:2015-03 Sterilization of health care products - Chemical indicators - Part 1: General requirements (ISO 11140-1:2014)
DIN EN 13481-7:2012-08 Railway applications - Track - Performance requirements for fastening systems - Part 7: Special fastening systems for switches and crossings and check rails
EN ISO 14922-2:1999 Thermal spraying - Quality requirements of thermally sprayed structures - Part 2: Comprehensive quality requirements (ISO 14922-2:1999)
DIN EN 14250 E : 2010 TIMBER STRUCTURES - PRODUCT REQUIREMENTS FOR PREFABRICATED STRUCTURAL MEMBERS ASSEMBLED WITH PUNCHED METAL PLATE FASTENERS
DIN EN 13599:2014-12 COPPER AND COPPER ALLOYS - COPPER PLATE, SHEET AND STRIP FOR ELECTRICAL PURPOSES
DIN EN 13022-2:2014-08 GLASS IN BUILDING - STRUCTURAL SEALANT GLAZING - PART 2: ASSEMBLY RULES
DIN EN 13261:2011-01 RAILWAY APPLICATIONS - WHEELSETS AND BOGIES - AXLES - PRODUCT REQUIREMENTS
DIN EN 13422:2009-08 VERTICAL ROAD SIGNS - PORTABLE DEFORMABLE WARNING DEVICES AND DELINEATORS - PORTABLE ROAD TRAFFIC SIGNS - CONES AND CYLINDERS
DIN EN 1423:2013-03 ROAD MARKING MATERIALS - DROP ON MATERIALS - GLASS BEADS, ANTISKID AGGREGATES AND MIXTURES OF THE TWO
DIN EN 14212 E : 2012 AMBIENT AIR - STANDARD METHOD FOR THE MEASUREMENT OF THE CONCENTRATION OF SULPHUR DIOXIDE BY ULTRAVIOLET FLUORESCENCE
DIN EN 14296 E : 2015 SANITARY APPLIANCES - COMMUNAL WASHING TROUGHS
DIN EN 14909 E : 2012 FLEXIBLE SHEETS FOR WATERPROOFING - PLASTIC AND RUBBER DAMP PROOF COURSES - DEFINITIONS AND CHARACTERISTICS
DIN EN 12158-1:2011-06 Builders' hoists for goods - Part 1: Hoists with accessible platforms (includes Amendment A1:2010)
DIN EN 13262:2011-06 RAILWAY APPLICATIONS - WHEELSETS AND BOGIES - WHEELS - PRODUCT REQUIREMENTS
DIN EN 1947:2014-09 FIRE-FIGHTING HOSES - SEMI-RIGID DELIVERY HOSES AND HOSE ASSEMBLIES FOR PUMPS AND VEHICLES
DIN EN 14532-1:2005-02 WELDING CONSUMABLES - TEST METHODS AND QUALITY REQUIREMENTS - PART 1: PRIMARY METHODS AND CONFORMITY ASSESSMENT OF CONSUMABLES FOR STEEL, NICKEL AND NICKEL ALLOYS
DIN EN 14375 E : 2016 CHILD-RESISTANT NON-RECLOSABLE PACKAGING FOR PHARMACEUTICAL PRODUCTS - REQUIREMENTS AND TESTING
DIN EN 1422:2014-08 STERILIZERS FOR MEDICAL PURPOSES - ETHYLENE OXIDE STERILIZERS - REQUIREMENTS AND TEST METHODS
DIN EN 12952-6:2011-10 Water-tube boilers and auxiliary installations - Part 6: Inspection during construction; documentation and marking of pressure parts of the boiler
DIN EN 13411-1 E : 2009 TERMINATIONS FOR STEEL WIRE ROPES - SAFETY - PART 1: THIMBLES FOR STEEL WIRE ROPE SLINGS
DIN EN 12899-2:2008-02 Fixed, vertical road traffic signs - Part 2: Transilluminated traffic bollards (TTB)
DIN EN 1982:2016-01 (Draft) COPPER AND COPPER ALLOYS - INGOTS AND CASTINGS
DIN EN 13481-2:2012-08 RAILWAY APPLICATIONS - TRACK - PERFORMANCE REQUIREMENTS FOR FASTENING SYSTEMS - PART 2: FASTENING SYSTEMS FOR CONCRETE SLEEPERS
DIN EN 15015 E : 2008 PLASTICS PIPING SYSTEMS - SYSTEMS FOR HOT AND COLD WATER NOT INTENDED FOR HUMAN CONSUMPTION - PERFORMANCE CHARACTERISTICS FOR PIPES, FITTINGS AND THEIR JOINTS
DIN EN 14964 E : 2007 RIGID UNDERLAYS FOR DISCONTINUOUS ROOFING - DEFINITIONS AND CHARACTERISTICS
DIN EN 1317-5:2012-06 ROAD RESTRAINT SYSTEMS - PART 5: PRODUCT REQUIREMENTS AND EVALUATION OF CONFORMITY FOR VEHICLE RESTRAINT SYSTEMS
DIN EN ISO 22000:2005-11 FOOD SAFETY MANAGEMENT SYSTEMS - REQUIREMENTS FOR ANY ORGANIZATION IN THE FOOD CHAIN
EN ISO 14922-4:1999 Thermal spraying - Quality requirements of thermally sprayed structures - Part 4: Elementary quality requirements (ISO 14922-4:1999)
DIN EN 1253-3:2016-09 GULLIES FOR BUILDINGS - PART 3: EVALUATION OF CONFORMITY
DIN EN 14267 E : 2004 IRRIGATION TECHNIQUES - IRRIGATION HYDRANTS
DIN EN 13602:2013-09 Copper and copper alloys - Drawn, round copper wire for the manufacture of electrical conductors
DIN EN 1254-1:1998-03 Copper and copper alloy plumbing fittings - Part 1: Fittings with ends for capillary soldering or capillary brazing to copper tubes
DIN EN ISO 11140-4:2007-07 Sterilization of health care products - Chemical indicators - Part 4: Class 2 indicators as an alternative to the Bowie and Dick-type test for detection of steam penetration (ISO 11140-4:2007)
DIN EN 14342 E : 2013 WOOD FLOORING - CHARACTERISTICS, EVALUATION OF CONFORMITY AND MARKING
DIN EN 13859-1:2014-07 FLEXIBLE SHEETS FOR WATERPROOFING - DEFINITIONS AND CHARACTERISTICS OF UNDERLAYS - PART 1: UNDERLAYS FOR DISCONTINUOUS ROOFING
DIN EN 13225:2013-06 PRECAST CONCRETE PRODUCTS - LINEAR STRUCTURAL ELEMENTS
DIN EN 14382 E : 2009 SAFETY DEVICES FOR GAS PRESSURE REGULATING STATIONS AND INSTALLATIONS - GAS SAFETY SHUT-OFF DEVICES FOR INLET PRESSURES UP TO 100 BAR
DIN EN ISO 11140-3:2009-09 STERILIZATION OF HEALTH CARE PRODUCTS - CHEMICAL INDICATORS - PART 3: CLASS 2 INDICATOR SYSTEMS FOR USE IN THE BOWIE AND DICK-TYPE STEAM PENETRATION TEST
DIN EN 13604:2013-09 Copper and copper alloys - Semiconductor devices, electronic and vacuum products made from high conductivity copper
DIN EN 12385-1:2009-01 STEEL WIRE ROPES - SAFETY - PART 1: GENERAL REQUIREMENTS
DIN EN 14359 E : 2017 GAS-LOADED ACCUMULATORS FOR FLUID POWER APPLICATIONS
BS EN 14525:2004 Ductile iron wide tolerance couplings and flange adaptors for use with pipes of different materials: ductile iron, grey iron, steel, PVC-U, PE, fibre-cement
15/30292344 DC : 0 BS ISO 19281 - AIR CARGO - FIRE RESISTANT CONTAINERS - DESIGN, PERFORMANCE AND TESTING REQUIREMENTS
IEC 61189-5-2:2015 Test methods for electrical materials, printed boards and other interconnection structures and assemblies - Part 5-2: General test methods for materials and assemblies - Soldering flux for printed board assemblies
BS EN 13063-2:2005 Chimneys. System chimneys with clay/ceramic flue liners Requirements and test methods under wet conditions
BS EN 764-5:2014 Pressure equipment Inspection documentation of metallic materials and compliance with the material specification
BS EN 13600:2013 Copper and copper alloys. Seamless copper tubes for electrical purposes
BS EN 15347:2007 Plastics. Recycled Plastics. Characterization of plastics waste
BS EN 14200:2004 Railway applications. Suspension components. Parabolic springs, steel
BS EN 14287:2004 Aluminium and aluminium alloys. Specific requirements on the chemical composition of products intended to be used for the manufacture of packaging and packaging components
BS EN 1826:1997 Biotechnology. Large-scale process and production. Control procedures for raw materials
BS EN 12094-2:2003 Fixed firefighting systems. Components for gas extinguishing systems Requirements and test methods for non-electrical automatic control and delay devices
BS EN 14408-1:2004 Plastics piping systems for renovation of underground gas supply networks General
BS EN 13980:2002 Potentially explosive atmospheres. Application of quality systems
BS EN 13290-1:1999 Space project management. General requirements Policy and principles
BS EN 10288:2002 Steel tubes and fittings for onshore and offshore pipelines. External two layer extruded polyethylene based coatings
BS EN 12094-7:2001 Fixed firefighting systems. Components for gas extinguishing systems Requirements and test methods for nozzles for CO2 systems
ISO 14922-1:1999 Thermal spraying Quality requirements of thermally sprayed structures Part 1: Guidance for selection and use
DIN EN 15014:2014-06 (Draft) PLASTICS PIPING SYSTEMS - BURIED AND ABOVE GROUND SYSTEMS FOR WATER AND OTHER FLUIDS UNDER PRESSURE - PERFORMANCE CHARACTERISTICS FOR PIPES, FITTINGS AND THEIR JOINTS
BS EN 61191-3:2017 Printed board assemblies Sectional specification. Requirements for through-hole mount soldered assemblies
BS EN 13063-3:2007 Chimneys. System chimneys with clay/ceramic flue liners Requirements and test methods for air flue system chimneys
BS EN 1304:2013 Clay roofing tiles and fittings. Product definitions and specifications
BS EN 12050-3:2015 Wastewater lifting plants for buildings and sites Lifting plants for limited applications
UNE-ISO 37500:2016 Guidance on outsourcing
BS EN ISO 10993-1 : 2009-10 BIOLOGICAL EVALUATION OF MEDICAL DEVICES - PART 1: EVALUATION AND TESTING WITHIN A RISK MANAGEMENT PROCESS (ISO 10993-1:2009)
BS EN 13407 : 2015 WALL-HUNG URINALS - FUNCTIONAL REQUIREMENTS AND TEST METHODS
BS EN 4166:2004 Aerospace series. Clips, spring tension, three parts. PTFE bushes
BS EN 13160-2:2003 Leak detection systems Pressure and vacuum systems
DIN EN 15342 E : 2008 PLASTICS - RECYCLED PLASTICS - CHARACTERIZATION OF POLYSTYRENE (PS) RECYCLATES
BS EN 517:2006 Prefabricated accessories for roofing. Roof safety hooks
BS ISO 24511:2007 Activities relating to drinking water and wastewater services. Guidelines for the management of wastewater utilities and for the assessment of wastewater services
13/30278104 DC : 0 BS ISO 10327 - AIR CARGO - MAIN DECK CONTAINERS - DESIGN AND TESTING
BS EN 15266:2007 Stainless steel pliable corrugated tubing kits in buildings for gas with an operating pressure up to 0,5 bar
BS EN 12101-3:2015 Smoke and heat control systems Specification for powered smoke and heat control ventilators (Fans)
BS EN 12337-2:2004 Glass in building. Chemically strengthed soda lime silicate glass Evaluation of conformity/Product standard
BS EN 179:2008 Building hardware. Emergency exit devices operated by a lever handle or push pad, for use on escape routes. Requirements and test methods
BS EN 556-1:2001 Sterilization of medical devices. Requirements for medical devices to be designated \'STERILE\' Part 1. Requirements for terminally sterilized medical devices
UNE-EN 13022-2:2015 Glass in building - Structural sealant glazing - Part 2: Assembly rules
BS EN 12101-2:2017 Smoke and heat control systems Natural smoke and heat exhaust ventilators
BS EN 14190:2014 Gypsum board products from reprocessing. Definitions, requirements and test methods
BS EN ISO 14554-2:2013 Quality requirements for welding. Resistance welding of metallic materials Elementary quality requirements
DIN EN 15266 E : 2007 STAINLESS STEEL PLIABLE CORRUGATED TUBING KITS IN BUILDINGS FOR GAS WITH AN OPERATING PRESSURE UP TO 0,5 BAR
BS EN 438-7:2005 High-pressure decorative laminates (HPL). Sheets based on thermosetting resins (usually called laminates) Compact laminate and HPL composite panels for internal and external wall and ceiling finishes
BS EN 12209:2016 Building hardware. Mechanically operated locks and locking plates. Requirements and test methods
BS EN ISO/IEC 15416:2002 Information technology. Automatic identification and data capture techniques. Bar code print quality test specification. Linear symbols
BS EN 450-2:2005 Fly ash for concrete Conformity evaluation
BS EN ISO 3452-2:2013 Non-destructive testing. Penetrant testing Testing of penetrant materials
BS EN 13981-4:2006 Aluminium and aluminium alloys. Products for structural railway applications. Technical conditions for inspection and delivery Forgings
BS EN 1492-4 : 2004 TEXTILE SLINGS - SAFETY - PART 4: LIFTING SLINGS FOR GENERAL SERVICE MADE FROM NATURAL AND MAN-MADE FIBRE ROPES
BS EN ISO 10380:2012 Pipework. Corrugated metal hoses and hose assemblies
BS EN 61189-5-1:2016 Test methods for electrical materials, printed boards and other interconnection structures and assemblies General test methods for materials and assemblies. Guidance for printed board assemblies
BS EN 14286:2008 Aluminium and aluminium alloys. Weldable rolled products for tanks for the storage and transportation of dangerous goods
BS EN 3052:2009 Aerospace series. Bolts, normal hexagonal head, close tolerance normal shank, short thread, in heat and corrosion resisting steel, passivated. Classification: 1100 MPa (at ambient temperature) / 425 °C
BS EN 12899-4:2007 Fixed, vertical road traffic signs Factory production control
BS EN 1344:2013 Clay pavers. Requirements and test methods
ISO/IEC Guide 62:1996 General requirements for bodies operating assessment and certification/registration of quality systems
UNE-EN 1559-1:2011 Founding - Technical conditions of delivery - Part 1: General
BS EN 1856-1:2009 Chimneys. Requirements for metal chimneys System chimney products
BS EN 14901:2006 Ductile iron pipes, fittings and accessories. Epoxy coating (heavy duty) of ductile iron fittings and accessories. Requirements and test methods
BS EN 1254-2:1998 Copper and copper alloys. Plumbing fittings Fittings with compression ends for use with copper tubes
BS EN 14889-2:2006 Fibres for concrete Polymer fibres. Definitions, specifications and conformity
12/30263299 DC : 0 BS EN 4826 - AEROSPACE SERIES - ZINC-NICKEL (12/16% NI) PLATING OF STEELS WITH SPECIFIED TENSILE STRENGTH <= 1450 MPA, COPPER, COPPER ALLOYS AND NICKEL ALLOYS AND ALUMINIUM ALLOYS FOR PARTS AND FASTENERS
BS EN 13877-3:2004 Concrete pavements Specifications for dowels to be used in concrete pavements
BS EN 877 : 1999 CAST IRON PIPES AND FITTINGS, THEIR JOINTS AND ACCESSORIES FOR THE EVACUATION OF WATER FROM BUILDINGS - REQUIREMENTS, TEST METHODS AND QUALITY ASSURANCE
ISO 13174:2012 Cathodic protection of harbour installations
I.S. EN ISO 13485:2016 MEDICAL DEVICES - QUALITY MANAGEMENT SYSTEMS - REQUIREMENTS FOR REGULATORY PURPOSES (ISO 13485:2016)
UNE-EN 14496:2017 Gypsum based adhesives for thermal/acoustic insulation composite panels and gypsum boards - Definitions, requirements and test methods
UNE-ISO 55000:2015 Asset management. Overview, principles and terminology.
BS EN 14267:2004 Irrigation techniques. Irrigation hydrants
UNE-EN ISO 11608-1:2015 Needle-based injection systems for medical use - Requirements and test methods - Part 1: Needle-based injection systems (ISO 11608-1:2014)
EN 197-2:2014 Cement - Part 2: Conformity evaluation
BS EN 12668-1:2010 Non-destructive testing. Characterization and verification of ultrasonic examination equipment Instruments
BS EN 506:2008 Roofing products of metal sheet. Specification for self-supporting products of copper or zinc sheet
UNE-EN ISO 10380:2013 Pipework - Corrugated metal hoses and hose assemblies (ISO 10380:2012)
ISO 17663:2009 Welding — Quality requirements for heat treatment in connection with welding and allied processes
BS EN 13348:2016 Copper and copper alloys. Seamless, round copper tubes for medical gases or vacuum
IEC 62326-1:2002 Printed boards - Part 1: Generic specification
BS EN 14350-1:2004 Child use and care articles. Drinking equipment General and mechanical requirements and tests
BS EN ISO 11140-1:2014 Sterilization of health care products. Chemical indicators General requirements
BS EN 45510-4-1:1999 Guide for the procurement of power station equipment. Boiler auxiliaries Equipment for reduction of dust emissions - Equipment for the reduction of dust emissions
IEC 61400-2:2013 Wind turbines - Part 2: Small wind turbines
BS EN ISO 16426:2002 Fasteners. Quality assurance system
BS EN 12809 : 2001 RESIDENTIAL INDEPENDENT BOILERS FIRED BY SOLID FUEL - NOMINAL HEAT OUTPUT UP TO 50 KW - REQUIREMENTS AND TEST METHODS
BS EN ISO/IEC 15423:2010 Information technology. Automatic identification and data capture techniques. Bar code scanner and decoder performance testing
BS EN 13913:2003 Railway applications. Rubber suspension components. Elastomer-based mechanical parts
ISO 17989-1:2015 Tractors and machinery for agriculture and forestry Sustainability Part 1: Principles
UNE-EN 15313:2017 Railway applications - In-service wheelset operation requirements - In-service and off-vehicle wheelset maintenance
BS EN 3444:2006 Aerospace series. Bolt, large bihexagonal head, close tolerance normal shank, medium length thread, in heat resisting nickel base alloy, passivated. Classification: 1250 MPa (at ambient temperature) / 650°C
BS EN 866-1:1997 Biological systems for testing sterilizers and sterilization processes General requirements
ISO 11135-1:2007 Sterilization of health care products Ethylene oxide Part 1: Requirements for development, validation and routine control of a sterilization process for medical devices
BS EN 14411:2012 Ceramic tiles. Definitions, classification, characteristics, evaluation of conformity and marking
BS EN 13802:2013 Railway applications. Suspension components. Hydraulic dampers
BS EN ISO 14031:2013 Environmental management. Environmental performance evaluation. Guidelines
I.S. EN ISO 16106:2006 PACKAGING - TRANSPORT PACKAGES FOR DANGEROUS GOODS -DANGEROUS GOODS PACKAGINGS, INTERMEDIATE BULK CONTAINERS (IBCS) AND LARGE PACKAGINGS - GUIDELINES FOR THE APPLICATION OF ISO 9001
UNE-EN 331:2016 Manually operated ball valves and closed bottom taper plug valves for gas installations for buildings
BS EN 14733 : 2005 BITUMEN AND BITUMINOUS BINDERS - BITUMINOUS EMULSIONS, FLUXED AND CUT-BACK BITUMEN FACTORY PRODUCTION CONTROL
BS EN 12899-3:2007 Fixed, vertical road traffic signs Delineator posts and retroreflectors
BS EN 13658-2:2005 Metal lath and beads. Definitions, requirements and test methods External rendering
UNE-EN 764-5:2015 Pressure equipment - Part 5: Inspection documentation of metallic materials and compliance with the material specification
BS EN 13481-3:2012 Railway applications. Track. Performance requirements for fastening systems Fastening systems for wood sleepers
IEC 61191-4:2017 Printed board assemblies - Part 4: Sectional specification - Requirements for terminal soldered assemblies
BS EN 13888:2009 Grout for tiles. Requirements, evaluation of conformity, classification and designation
UNE-EN 13230-4:2016 Railway applications - Track - Concrete sleepers and bearers - Part 4: Prestressed bearers for switches and crossings
BS EN 14382 : 2005 SAFETY DEVICES FOR GAS PRESSURE REGULATING STATIONS AND INSTALLATIONS - GAS SAFETY SHUT-OFF DEVICES FOR INLET PRESSURES UP TO 100 BAR
BS EN 45510-5-1:1998 Guide for the procurement of power station equipment Steam turbines
BS EN 50155:2017 Railway applications. Rolling stock. Electronic equipment
BS EN 61191-1:2013 Printed board assemblies Generic specification. Requirements for soldered electrical and electronic assemblies using surface mount and related assembly technologies
BS EN ISO 19902 : 2007 PETROLEUM AND NATURAL GAS INDUSTRIES - FIXED STEEL OFFSHORE STRUCTURES
BS EN 1790:2013 Road marking materials. Preformed road markings
UNE-EN 14680:2016 Adhesives for non-pressure thermoplastics piping systems - Specifications
BS EN 13230-2:2016 Railway applications. Track. Concrete sleepers and bearers Prestressed monoblock sleepers
BS EN ISO 14534:2015 Ophthalmic optics. Contact lenses and contact lens care products. Fundamental requirements
BS EN 12050-2:2015 Wastewater lifting plants for buildings and sites Lifting plants for faecal-free wastewater
UNE-EN ISO 14161:2010 Sterilization of health care products - Biological indicators - Guidance for the selection, use and interpretation of results (ISO 14161:2009)
BS EN ISO 22442-2:2015 Medical devices utilizing animal tissues and their derivatives Controls on sourcing, collection and handling
BS EN 14628:2005 Ductile iron pipes, fittings and accessories. External polythene coating for pipes. Requirements and test methods
BS EN 998-1:2016 Specification for mortar for masonry Rendering and plastering mortar
BS EN 14508:2016 Postal services. Quality of service. Measurement of the transit time of end-to-end services for single piece non-priority mail and second class mail
BS EN 13967 : 2012 FLEXIBLE SHEETS FOR WATERPROOFING - PLASTIC AND RUBBER DAMP PROOF SHEETS INCLUDING PLASTIC AND RUBBER BASEMENT TANKING SHEET - DEFINITIONS AND CHARACTERISTICS
ISO 14922-4:1999 Thermal spraying Quality requirements of thermally sprayed structures Part 4: Elementary quality requirements
BS EN 520 : 2004 GYPSUM PLASTERBOARDS - DEFINITIONS, REQUIREMENTS AND TEST METHODS
BS EN 13261 : 2009 RAILWAY APPLICATIONS - WHEELSETS AND BOGIES - AXLES - PRODUCT REQUIREMENTS
BS EN 12094-8:2006 Fixed firefighting systems. Components for gas extinguishing systems Requirements and test methods for connectors
BS EN 2754:2006 Aerospace series. Nuts, anchor, self locking, two lug, floating with counterbore. Classification: 1100 MPa/235°C
BS EN 10340:2007 Steel castings for structural uses
BS EN 14540:2014 Fire-fighting hoses. Non-percolating layflat hoses for fixed systems
BS EN ISO 14111:1999 Natural gas. Guidelines to traceability in analysis
BS EN 13160-4:2003 Leak detection systems Liquid and/or vapour sensor systems for use in leakage containments or interstitial spaces
UNE-EN 14814:2016 Adhesives for thermoplastic piping systems for fluids under pressure - Specifications
BS EN ISO 14557 : 2002 FIRE-FIGHTING HOSES - RUBBER AND PLASTICS SUCTION HOSES AND HOSE ASSEMBLIES
BS EN 14616:2004 Thermal spraying. Recommendations for thermal spraying
BS EN 1423:2012 Road marking materials. Drop on materials. Glass beads, antiskid aggregates and mixtures of the two
BS EN 13597:2003 Railway applications. Rubber suspension components. Rubber diaphragms for pneumatic suspension springs
BS EN 14989-1:2007 Chimneys. Requirements and test methods for metal chimneys and material independent air supply ducts for roomsealed heating applications Vertical air/flue terminals for C6-type appliances
UNE-EN ISO 28765:2016 Vitreous and porcelain enamels - Design of bolted steel tanks for the storage or treatment of water or municipal or industrial effluents and sludges (ISO 28765:2016)
ISO 14554-1:2013 Quality requirements for welding — Resistance welding of metallic materials — Part 1: Comprehensive quality requirements
BS EN 14964:2006 Rigid underlays for discontinuous roofing. Definitions and characteristics
BS EN 12094-13:2001 Fixed firefighting systems. Components for gas extinguishing systems Requirements and test methods for check valves and non-return valves
BS EN ISO 14161:2009 Sterilization of health care products. Biological indicators. Guidance for the selection, use and interpretation of results
BS EN 13616:2004 Overfill prevention devices for static tanks for liquid petroleum fuels
BS EN 14566 : 2008 MECHANICAL FASTENERS FOR GYPSUM PLASTERBOARD SYSTEMS - DEFINITIONS, REQUIREMENTS AND TEST METHODS
BS EN 12420:2014 Copper and copper alloys. Forgings
BS EN 1559-1:2011 Founding. Technical conditions of delivery General
16/30282633 DC : 0 BS EN 50155 - RAILWAY APPLICATIONS - ELECTRONIC EQUIPMENT USED ON ROLLING STOCK
14/30244780 DC : 0 BS ISO 19859 - GAS TURBINE APPLICATIONS - REQUIREMENTS FOR POWER GENERATION
BS EN 14419:2009 District heating pipes. Preinsulated bonded pipe systems for directly buried hot water networks. Surveillance systems
ISO 13408-1:2008 Aseptic processing of health care products — Part 1: General requirements
BS EN 15014:2007 Plastics piping systems. Buried and above ground systems for water and other fluids under pressure. Performance characteristics for pipes, fittings and their joints
BS EN 13253:2016 Geotextiles and geotextile-related products. Characteristics required for use in erosion control works (coastal protection, bank revetments)
BS EN 12591:2009 Bitumen and bituminous binders. Specifications for paving grade bitumens
UNE-EN 13257:2017 Geotextiles and geotextile-related products - Characteristics required for use in solid waste disposals
BS EN ISO 11442:2006 Technical product documentation. Document management
BS EN 13250:2016 Geotextiles and geotextile-related products. Characteristics required for use in the construction of railways
ISO 10014:2006 Quality management Guidelines for realizing financial and economic benefits
ISO 11140-1:2014 Sterilization of health care products Chemical indicators Part 1: General requirements
BS EN 13108-21:2016 Bituminous mixtures. Material specifications Factory Production Control
UNI EN 508-3 : 2008 ROOFING PRODUCTS FROM METAL SHEET - SPECIFICATION FOR SELF-SUPPORTING PRODUCTS OF STEEL, ALUMINIUM OR STAINLESS STEEL SHEET - PART 3: STAINLESS STEEL
I.S. EN 13601:2013 COPPER AND COPPER ALLOYS - COPPER ROD, BAR AND WIRE FOR GENERAL ELECTRICAL PURPOSES
I.S. EN 13263-2:2005 SILICA FUME FOR CONCRETE - PART 2: CONFORMITY EVALUATION
UNE-ISO 22301:2013 Societal security. Business continuity management systems. Requirements
I.S. EN ISO 11608-1:2015 NEEDLE-BASED INJECTION SYSTEMS FOR MEDICAL USE - REQUIREMENTS AND TEST METHODS - PART 1: NEEDLE-BASED INJECTION SYSTEMS (ISO 11608-1:2014)
I.S. EN ISO 15189:2012 MEDICAL LABORATORIES - REQUIREMENTS FOR QUALITY AND COMPETENCE (ISO 15189:2012, CORRECTED VERSION 2014-08-15)
I.S. EN 13148:2010 COPPER AND COPPER ALLOYS - HOT-DIP TINNED STRIP
DIN EN 12899-4:2008-02 Fixed, vertical road traffic signs - Part 4: Factory production control
I.S. EN ISO 14557:2003 FIRE-FIGHTING HOSES - RUBBER AND PLASTICS SUCTION HOSES AND HOSE ASSEMBLIES
I.S. EN 14424:2013 HOSE FITTINGS WITH SCREWED FERRULES
I.S. EN 12583:2014 GAS INFRASTRUCTURE - COMPRESSOR STATIONS - FUNCTIONAL REQUIREMENTS
DIN EN 729-1:1994-11 QUALITY REQUIREMENTS FOR WELDING - FUSION WELDING OF METALLIC MATERIALS - PART 1: GUIDELINES FOR SELECTION AND USE
I.S. EN 14901:2014 DUCTILE IRON PIPES, FITTINGS AND ACCESSORIES - EPOXY COATING (HEAVY DUTY) OF DUCTILE IRON FITTINGS AND ACCESSORIES - REQUIREMENTS AND TEST METHODS
DIN EN 729-2:1994-11 QUALITY REQUIREMENTS FOR WELDING - FUSION WELDING OF METALLIC MATERIALS - PART 2: COMPREHENSIVE QUALITY REQUIREMENTS
DIN EN 14195:2015-03 METAL FRAMING COMPONENTS FOR GYPSUM BOARD SYSTEMS - DEFINITIONS, REQUIREMENTS AND TEST METHODS
BS 6001-3:2005 Sampling procedures for inspection by attributes Specification for skip-lot sampling procedures
EN 45510-5-2 : 1998 GUIDE FOR PROCUREMENT OF POWER STATION EQUIPMENT - PART 5-2: GAS TURBINES
EN 62326-1:2002 Printed boards - Part 1: Generic specification
CEN/TS 15176:2005 Evaluation of conformity for fixed firefighting systems standards
EN 13230-3:2016 Railway applications - Track - Concrete sleepers and bearers - Part 3: Twin-block reinforced sleepers
EN 13481-7:2012 Railway applications - Track - Performance requirements for fastening systems - Part 7: Special fastening systems for switches and crossings and check rails
EN 13349:2002 Copper and coppper alloys - Pre-insulated copper tubes with solid covering
I.S. EN ISO 14922-3:1999 THERMAL SPRAYING - QUALITY REQUIREMENTS OF THERMALLY SPRAYED STRUCTURES - PART 3: STANDARD QUALITY REQUIREMENTS
DIN EN 13815:2006-12 Fibrous gypsum plaster casts - Definitions, requirements and test methods
I.S. EN 877:2000 CAST IRON PIPES AND FITTINGS, THEIR JOINTS AND ACCESSORIES FOR THE EVACUATION OF WATER FROM BUILDINGS - REQUIREMENTS, TEST METHODS AND QUALITY ASSURANCE
EN 13263-2:2005+A1:2009 Silica fume for concrete - Part 2: Conformity evaluation
UNI EN 12158-1 : 2010 BUILDERS' HOISTS FOR GOODS - PART 1: HOISTS WITH ACCESSIBLE PLATFORMS
DIN EN 14782:2006-03 Self-supporting metal sheet for roofing, external cladding and internal lining - Product specification and requirements
CEN/TR 15353:2007 Plastics - Recycled plastics - Guidelines for the development of standards for recycled plastics
DIN EN 54-17:2006-03 Fire detection and fire alarm systems - Part 17: Short-circuit isolators
EN 14229:2010 Structural timber - Wood poles for overhead lines
EN 60896-22:2004 Stationary lead-acid batteries - Part 22: Valve regulated types - Requirements
ONORM EN ISO 11296-4 : 2011 PLASTICS PIPING SYSTEMS FOR RENOVATION OF UNDERGROUND NON-PRESSURE DRAINAGE AND SEWERAGE NETWORKS - PART 4: LINING WITH CURED-IN-PLACE PIPES
EN 13255:2016 Geotextiles and geotextile-related products - Characteristics required for use in the construction of canals
EN 12101-3:2015 Smoke and heat control systems - Part 3: Specification for powered smoke and heat control ventilators (Fans)
EN 13084-7:2012 Free-standing chimneys - Part 7: Product specifications of cylindrical steel fabrications for use in single wall steel chimneys and steel liners
EN 13312-4:2001 Biotechnology - Performance criteria for piping and instrumentation - Part 4: Tubes and pipes
EN 1337-8:2007 Structural bearings - Part 8: Guide Bearings and Restraint Bearings
EN 50502:2015 Railway applications - Rolling stock - Electric equipment in trolley buses - Safety requirements and current collection systems
EN 15213-4:2013 Intelligent transport systems - After-theft systems for the recovery of stolen vehicles - Part 4: Interface and system requirements in terms of long range communication system
DIN EN 818-1:2008-12 SHORT LINK CHAIN FOR LIFTING PURPOSES - SAFETY - PART 1: GENERAL CONDITIONS OF ACCEPTANCE
DIN EN ISO 11980:2013-03 Ophthalmic optics - Contact lenses and contact lens care products - Guidance for clinical investigations (ISO 11980:2012)
EN 13069:2005 Chimneys - Clay/ceramic outer walls for system chimneys - Requirements and test methods
EN 45510-5-4:1998 GUIDE FOR PROCUREMENT OF POWER STATION EQUIPMENT - PART 5-4: HYDRAULIC TURBINES, STORAGE PUMPS AND PUMP-TURBINES
EN 12798:2007 (edition 2) Transport Quality Management System - Road, Rail and Inland navigation transport - Quality management system requirements to supplement EN ISO 9001 for the transport of dangerous goods with regard to safety
EN 13230-2:2016 Railway applications - Track - Concrete sleepers and bearers - Part 2: Prestressed monoblock sleepers
EN 12259-5:2002 Fixed firefighting systems - Components for sprinkler and water spray systems - Part 5: Water flow detectors
EN ISO/IEC 17024:2012 Conformity assessment - General requirements for bodies operating certification of persons (ISO/IEC 17024:2012)
HD 620 : 2010 DISTRIBUTION CABLES WITH EXTRUDED INSULATION FOR RATED VOLTAGES FROM 3,6/6 (7,2) KV UP TO AND INCLUDING 20,8/36 (42) KV
EN 61189-5-1:2016 Test methods for electrical materials, printed boards and other interconnection structures and assemblies - Part 5-1: General test methods for materials and assemblies - Guidance for printed board assemblies
DIN EN ISO 9000-3:1998-08 QUALITY MANAGEMENT AND QUALITY ASSURANCE STANDARDS - PART 3: GUIDELINES FOR THE APPLICATION OF ISO 9001:1994 TO THE DEVELOPMENT, SUPPLY, INSTALLATION AND MAINTENANCE OF COMPUTER SOFTWARE
EN 10223-8:2013 Steel wire and wire products for fencing and netting - Part 8: Welded mesh gabion products
EN 12101-1:2005/A1:2006 SMOKE AND HEAT CONTROL SYSTEMS - PART 1: SPECIFICATION FOR SMOKE BARRIERS
EN 12952-2:2011 Water-tube boilers and auxiliary installations - Part 2: Materials for pressure parts of boilers and accessories
DIN EN 14800:2007-06 Corrugated safety metal hose assemblies for the connection of domestic appliances using gaseous fuels
CEN/TS 13598-3:2012 Plastics piping systems for non-pressure underground drainage and sewerage - Unplasticized poly(vinyl chloride)(PVC-U), polypropylene (PP) and polyethylene (PE) - Part 3: Guidance for assessment of conformity
EN 61479:2001/A1:2002 LIVE WORKING - FLEXIBLE CONDUCTOR COVERS (LINE HOSES) OF INSULATING MATERIAL
EN 12566-6:2016 Small wastewater treatment systems for up to 50 PT - Part 6: Prefabricated treatment units for septic tank effluent
EN 10242:1994/A2:2003 THREADED PIPE FITTING IN MALLEABLE CAST IRON
EN 61400-2:2014 Wind turbines - Part 2: Small wind turbines
EN 50206-1:2010 Railway applications - Rolling stock - Pantographs: Characteristics and tests - Part 1: Pantographs for main line vehicles
EN 124-4:2015 Gully tops and manhole tops for vehicular and pedestrian areas - Part 4: Gully tops and manhole tops made of steel reinforced concrete
EN 12195-4:2003 Load restraint assemblies on road vehicles - Safety - Part 4: Lashing steel wire ropes
EN 62155:2003 Hollow pressurized and unpressurized ceramic and glass insulators for use in electrical equipment with rated voltages greater than 1 000 V
EN 1057:2006+A1:2010 Copper and copper alloys - Seamless, round copper tubes for water and gas in sanitary and heating applications
CEN/TS 15718:2011 Railway applications - Wheelsets and bogies - Product requirements for cast wheels
EN 60694:1996/A2:2001 COMMON SPECIFICATIONS FOR HIGH-VOLTAGE SWITCHGEAR AND CONTROLGEAR STANDARDS
EN 61207-6:2015 Expression of performance of gas analyzers - Part 6:Photometric analyzers
EN 13265:2016 Geotextiles and geotextile-related products - Characteristics required for use in liquid waste containment projects
EN 12899-4:2007 Fixed, vertical road traffic signs - Part 4: Factory production control
EN 61207-1:2010 Expression of performance of gas analyzers - Part 1: General
EN 12195-3:2001 Load restraint assemblies on road vehicles - Safety - Part 3: Lashing chains
EN 10224:2002/A1:2005 NON-ALLOY STEEL TUBES AND FITTINGS FOR THE CONVEYANCE OF WATER AND OTHER AQUEOUS LIQUIDS - TECHNICAL DELIVERY CONDITIONS
EN 12952-5:2011 Water-tube boilers and auxiliary installations - Part 5: Workmanship and construction of pressure parts of the boiler
EN 50129 : 2003 COR 2010 RAILWAY APPLICATIONS - COMMUNICATION, SIGNALLING AND PROCESSING SYSTEMS - SAFETY RELATED ELECTRONIC SYSTEMS FOR SIGNALLING
EN 13311-1:2001 Biotechnology - Performance criteria for vessels - Part 1: General performance criteria
EN 50575:2014/A1:2016 POWER, CONTROL AND COMMUNICATION CABLES - CABLES FOR GENERAL APPLICATIONS IN CONSTRUCTION WORKS SUBJECT TO REACTION TO FIRE REQUIREMENTS
EN 62138 : 2009 NUCLEAR POWER PLANTS - INSTRUMENTATION AND CONTROL IMPORTANT FOR SAFETY - SOFTWARE ASPECTS FOR COMPUTER-BASED SYSTEMS PERFORMING CATEGORY B OR C FUNCTIONS
EN 10223-3:2013 Steel wire and wire products for fencing and netting - Part 3: Hexagonal steel wire mesh products for civil engineering purposes
IEC 61133:2016 RLV Railway applications - Rolling stock - Testing of rolling stock on completion of construction and before entry into service
DIN EN 14904:2006-06 Surfaces for sports areas - Indoor surfaces for multi-sports use - Specification
DIN EN 14846:2008-11 BUILDING HARDWARE - LOCKS AND LATCHES - ELECTROMECHANICALLY OPERATED LOCKS AND STRIKING PLATES - REQUIREMENTS AND TEST METHODS
DIN EN 13063-3:2007-10 CHIMNEYS - SYSTEM CHIMNEYS WITH CLAY/CERAMIC FLUE LINERS - PART 3: REQUIREMENTS AND TEST METHODS FOR AIR FLUE SYSTEM CHIMNEYS
EN 12166:2016 Copper and copper alloys - Wire for general purposes
EN 12080:2017 Railway applications - Axleboxes - Rolling bearings
CEN ISO/TR 13881:2011 Petroleum and natural gas industries - Classification and conformity assessment of products, processes and services (ISO/TR 13881:2000)
EN 124-6:2015 Gully tops and manhole tops for vehicular and pedestrian areas - Part 6: Gully tops and manhole tops made of polypropylene (PP), polyethylene (PE) or unplasticized poly(vinyl chloride) (PVC-U)
EN 62304:2006/A1:2015 MEDICAL DEVICE SOFTWARE - SOFTWARE LIFE-CYCLE PROCESSES (IEC 62304:2006/A1:2015)
DIN EN 508-2:2009-07 ROOFING PRODUCTS FROM METAL SHEET - SPECIFICATION FOR SELF-SUPPORTING PRODUCTS OF STEEL, ALUMINIUM OR STAINLESS STEEL SHEET - PART 2: ALUMINIUM
DIN EN 14889-1:2006-11 Fibres for concrete - Part 1: Steel fibres - Definitions, specifications and conformity
EN 62566:2014 Nuclear power plants - Instrumentation and control important to safety - Development of HDL-programmed integrated circuits for systems performing category A functions
EN 124-2:2015 Gully tops and manhole tops for vehicular and pedestrian areas - Part 2: Gully tops and manhole tops made of cast iron
EN 12326-1:2014 SLATE AND STONE FOR DISCONTINUOUS ROOFING AND EXTERNAL CLADDING - PART 1: SPECIFICATIONS FOR SLATE AND CARBONATE SLATE
EN 13250:2016 Geotextiles and geotextile-related products - Characteristics required for use in the construction of railways
EN 1:1998/A1:2007 FLUED OIL STOVES WITH VAPORIZING BURNERS
CEN/TR 14383-2:2007 Prevention of crime - Urban planning and building design - Part 2: Urban planning
EN 12050-1:2015 Wastewater lifting plants for buildings and sites - Part 1: Lifting plants for wastewater containing faecal matter
EN 62309:2004 Dependability of products containing reused parts - Requirements for functionality and tests
CEN/TS 1453-2:2017 Plastics piping systems with structured wall pipes for soil and waste discharge (low and high temperature) inside buildings - Unplasticized poly(vinyl chloride) (PVC-U) - Part 2: Guidance for the assessment of conformity
EN 12285-2 : 2005 WORKSHOP FABRICATED STEEL TANKS - PART 2: HORIZONTAL CYLINDRICAL SINGLE SKIN AND DOUBLE SKIN TANKS FOR THE ABOVEGROUND STORAGE OF FLAMMABLE AND NON-FLAMMABLE WATER POLLUTING LIQUIDS
EN 61162-402:2005 Maritime navigation and radiocommunication equipment and systems - Digital interfaces - Part 402: Multiple talkers and multiple listeners - Ship systems interconnection - Documentation and test requirements
EN 13237:2012 Potentially explosive atmospheres - Terms and definitions for equipment and protective systems intended for use in potentially explosive atmospheres
CEN/CLC ISO/IEC/TS 17021-3:2016 Conformity assessment - Requirements for bodies providing audit and certification of management systems - Part 3: Competence requirements for auditing and certification of quality management systems (ISO/IEC/TS 17021-3:2013)
DIN EN 508-1:2000-12 ROOFING AND CLADDING PRODUCTS FROM METAL SHEET - SPECIFICATION FOR SELF-SUPPORTING OF STEEL, ALUMINIUM OR STAINLESS STEEL SHEET - PART 1: STEEL
DIN EN 14891:2017-05 LIQUID APPLIED WATER IMPERMEABLE PRODUCTS FOR USE BENEATH CERAMIC TILING BONDED WITH ADHESIVES - REQUIREMENTS, TEST METHODS, ASSESSMENT AND VERIFICATION OF CONSTANCY OF PERFORMANCE, CLASSIFICATION AND MARKING
EN 10219-1:2006 Cold formed welded structural hollow sections of non-alloy and fine grain steels - Part 1: Technical delivery conditions
EN 12306:1997 Biotechnology - Guidance for quality control of diagnostic kits used in agriculture, plant and animal pest and disease control and environmental contamination
EN 10088-4:2009 Stainless steels - Part 4: Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for construction purposes
EN 61189-2:2006 Test methods for electrical materials, printed boards and other interconnection structures and assemblies - Part 2: Test methods for materials for interconnection structures
DIN EN 14811:2019-06 Railway applications - Track - Special purpose rail - Grooved rails and associated construction profiles; German version EN 14811:2019
EN 12566-3:2016 Small wastewater treatment systems for up to 50 PT - Part 3: Packaged and/or site assembled domestic wastewater treatment plants
EN 12195-2:2000 Load restraint assemblies on road vehicles - Safety - Part 2: Web lashing made from man-made fibres
EN 13411-1:2002+A1:2008 Terminations for steel wire ropes - Safety - Part 1: Thimbles for steel wire rope slings
CEN/TS 12666-2:2012 Plastics piping systems for non-pressure underground drainage and sewerage - Polyethylene (PE) - Part 2: Guidance for the assessment of conformity
EN 10210-1:2006 Hot finished structural hollow sections of non-alloy and fine grain steels - Part 1: Technical delivery conditions
CEN ISO/TS 13972:2015 Health informatics - Detailed clinical models, characteristics and processes (ISO/TS 13972:2015)
DIN EN 14496:2017-09 GYPSUM BASED ADHESIVES FOR THERMAL/ACOUSTIC INSULATION COMPOSITE PANELS AND GYPSUM BOARDS - DEFINITIONS, REQUIREMENTS AND TEST METHODS
CEN ISO/TR 14969:2005 Medical devices - Quality management systems - Guidance on the application of ISO 13485:2003 (ISO/TR 14969:2004)
EN 12566-7:2016 Small wastewater treatment systems for up to 50 PT - Part 7: Prefabricated tertiary treatment units
EN 12259-1:1999 + A1:2001/A3:2006 FIXED FIREFIGHTING SYSTEMS - COMPONENTS FOR SPRINKLER AND WATER SPRAY SYSTEMS - PART 1: SPRINKLERS
EN 13225:2013 Precast concrete products - Linear structural elements
EN 13224:2011 Precast concrete products - Ribbed floor elements
I.S. EN ISO 14922-2:1999 THERMAL SPRAYING - QUALITY REQUIREMENTS OF THERMALLY SPRAYED STRUCTURES - PART 2: COMPREHENSIVE QUALITY REQUIREMENTS
EN 12081:2017 Railway applications - Axleboxes - Lubricating greases
DIN EN 14616:2005-02 THERMAL SPRAYING - RECOMMENDATIONS FOR THERMAL SPRAYING
EN 61069-8:2016 Industrial-process measurement, control and automation - Evaluation of system properties for the purpose of system assessment - Part 8: Assessment of other system properties
EN 10312:2002/A1:2005 WELDED STAINLESS STEEL TUBES FOR THE CONVEYANCE OF WATER AND OTHER AQUEOUS LIQUIDS - TECHNICAL DELIVERY CONDITIONS
EN 12899-1:2007 Fixed, vertical road traffic signs - Part 1: Fixed signs
EN 13022-2:2014 Glass in building - Structural sealant glazing - Part 2: Assembly rules
EN 61478:2001/A1:2003 LIVE WORKING - LADDERS OF INSULATING MATERIAL
CEN/TR 15592:2007 Health services - Quality management systems - Guide for the use of EN ISO 9004:2000 in health services for performance improvement
EN 61131-6:2012 Programmable controllers - Part 6: Functional safety
EN 12101-6:2005/AC:2006 SMOKE AND HEAT CONTROL SYSTEMS - PART 6: SPECIFICATION FOR PRESSURE DIFFERENTIAL SYSTEMS - KITS
CEN/TS 13476-4:2013 Plastics piping systems for non-pressure underground drainage and sewerage - Structured-wall piping systems of unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) - Part 4: Guidance for the assessment of conformity
EN 62402 : 2007 OBSOLESCENCE MANAGEMENT - APPLICATION GUIDE
EN 61209:1999 Maritime navigation and radiocommunication equipment and systems - Integrated bridge systems (IBS) - Operational and performance requirements, methods of testing and required test results
EN 61189-6:2006 Test methods for electrical materials, interconnection structures and assemblies - Part 6: Test methods for materials used in manufacturing electronic assemblies
EN 13160-2:2016 Leak detection systems - Part 2: Requirements and test/assessment methods for pressure and vacuum systems
EN 13481-5:2012+A1:2017 Railway applications - Track - Performance requirements for fastening systems - Part 5: Fastening systems for slab track with rail on the surface or rail embedded in a channel
EN 1051-2:2007 Glass in building - Glass blocks and glass pavers - Part 2: Evaluation of conformity/Product standard
EN 10025-1:2004 Hot rolled products of structural steels - Part 1: General technical delivery conditions
EN 10021:2006 General technical delivery conditions for steel products
EN 12094-11 : 2003 FIXED FIREFIGHTING SYSTEMS - COMPONENTS FOR GAS EXTINGUISHING SYSTEMS - PART 11: REQUIREMENTS AND TEST METHODS FOR MECHANICAL WEIGHING DEVICES
EN 12668-1:2010 Non-destructive testing - Characterization and verification of ultrasonic examination equipment - Part 1: Instruments
EN 13172:2012 Thermal insulation products - Evaluation of conformity
DIN EN ISO 16140:2003-09 MICROBIOLOGY OF FOOD AND ANIMAL FEEDING STUFFS - PROTOCOL FOR THE VALIDATION OF ALTERNATIVE METHODS (ISO 16140:2003 + AMD.1:2011)
DIN EN 12094-9:2003-07 FIXED FIREFIGHTING SYSTEMS - COMPONENTS FOR GAS EXTINGUISHING SYSTEMS - PART 9: REQUIREMENTS AND TEST METHODS FOR SPECIAL FIRE DETECTORS
EN 12368:2015 Traffic control equipment - Signal heads
EN 13245-2:2008/AC:2009 PLASTICS - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) PROFILES FOR BUILDING APPLICATIONS - PART 2: PVC-U PROFILES AND PVC-UE PROFILES FOR INTERNAL AND EXTERNAL WALL AND CEILING FINISHES
EN 10311:2005 Joints for the connection of steel tubes and fittings for the conveyance of water and other aqueous liquids
EN 12966-3 : 2005 ROAD VERTICAL SIGNS - VARIABLE MESSAGE TRAFFIC SIGNS - PART 3: FACTORY PRODUCTION CONTROL
EN 12462:1998 Biotechnology - Performance criteria for pumps
EN 10288:2002 Steel tubes and fittings for onshore and offshore pipelines - External two layer extruded polyethylene based coatings
EN 12899-2:2007 Fixed, vertical road traffic signs - Part 2: Transilluminated traffic bollards (TTB)
EN ISO 17663:2009 Welding - Quality requirements for heat treatment in connection with welding and allied processes (ISO 17663:2009)
CEN/TS 15472:2016 Postal services - Method for measurement of parcel transit time for cross-border parcels within the European Union and EFTA using Tracking and Tracing
EN 62366 : 2008 AMD 1 2015 MEDICAL DEVICES - APPLICATION OF USABILITY ENGINEERING TO MEDICAL DEVICES (IEC 62366:2007/A1:2014)
CEN/TR 16626:2014 Vitrified clay pipe systems for drains and sewers - Guidance for voluntary third-party certification procedures
EN 124-3:2015 Gully tops and manhole tops for vehicular and pedestrian areas - Part 3: Gully tops and manhole tops made of steel or aluminium alloys
EN 13160-3:2016 Leak detection systems - Part 3: Requirements and test/assessment methods for liquid systems for tanks
CEN/TR 1317-6 : 2012 ROAD RESTRAINT SYSTEMS - PART 6: PEDESTRIAN RESTRAINT SYSTEM - PEDESTRIAN PARAPETS
EN 12050-3:2015 Wastewater lifting plants for buildings and sites - Part 3: Lifting plants for limited applications
EN 12094-7:2000/A1:2005 FIXED FIREFIGHTING SYSTEMS - COMPONENTS FOR GAS EXTINGUISHING SYSTEMS - PART 7: REQUIREMENTS AND TEST METHODS FOR NOZZLES FOR CO[2] SYSTEMS
DIN EN 14209:2017-09 PREFORMED PLASTERBOARD CORNICES - DEFINITIONS, REQUIREMENTS AND TEST METHODS
EN 12273:2008 Slurry surfacing - Requirements
EN 12781:2001 Wallcoverings - Specification for cork panels
EN ISO 11140-1:2014 Sterilization of health care products - Chemical indicators - Part 1: General requirements (ISO 11140-1:2014)
CEN/TS 1852-2:2015 Plastics piping systems for non-pressure underground drainage and sewerage - Polypropylene (PP) - Part 2: Guidance for the assessment of conformity
EN 15224:2016 Quality management systems - EN ISO 9001:2015 for healthcare
EN 12004:2007+A1:2012 Adhesives for tiles - Requirements, evaluation of conformity, classification and designation
CEN/TS 1566-2:2012 Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Chlorinated poly(vinyl chloride) (PVC-C) - Part 2: Guidance for assessment of conformity
CEN/TS 16919:2016 Postal services - Interface and data transfer format for capturing postal automation events IDT-PAE
EN 15234-1:2011 Solid biofuels - Fuel quality assurance - Part 1: General requirements
EN 12566-4:2016 Small wastewater treatment systems for up to 50 PT - Part 4: Septic tanks assembled in situ from prefabricated kits
EN 12337-2:2004 Glass in building - Chemically strengthened soda lime silicate glass - Part 2: Evaluation of conformity/Product standard
EN 12809:2001/A1:2004/AC:2007 RESIDENTIAL INDEPENDENT BOILERS FIRED BY SOLID FUEL - NOMINAL HEAT OUTPUT UP TO 50 KW - REQUIREMENTS AND TEST METHODS
EN 10253-3:2008 Butt-welding pipe fittings - Part 3: Wrought austenitic and austenitic-ferritic (duplex) stainless steels without specific inspection requirements
UNI EN 13411-7 : 2009 TERMINATIONS FOR STEEL WIRE ROPES - SAFETY - PART 7: SYMMETRIC WEDGE SOCKET
UNI EN 877 : 2007 CAST IRON PIPES AND FITTINGS, THEIR JOINTS AND ACCESSORIES FOR THE EVACUATION OF WATER FROM BUILDINGS - REQUIREMENTS, TEST METHODS AND QUALITY ASSURANCE
EN 13291-1:1999 Space product assurance - General requirements - Part 1: Policy and principles
EN 13411-6:2004+A1:2008 Terminations for steel wire ropes - Safety - Part 6: Asymmetric wedge socket
EN 13312-1:2001 Biotechnology - Performance criteria for piping and instrumentation - Part 1: General performance criteria
EN 1013:2012+A1:2014 LIGHT TRANSMITTING SINGLE SKIN PROFILED PLASTICS SHEETS FOR INTERNAL AND EXTERNAL ROOFS, WALLS AND CEILINGS - REQUIREMENTS AND TEST METHODS
EN 13292:1999 Space engineering standards - Policy and principles
EN 45510-1 : 1997 Guide for procurement of power station equipment - Part 1: Common clauses
EN 12101-10:2005/AC:2007 SMOKE AND HEAT CONTROL SYSTEMS - PART 10: POWER SUPPLIES
EN 12150-2:2004 Glass in building - Thermally toughened soda lime silicate safety glass - Part 2: Evaluation of conformity/Product standard
CEN/TR 15983:2010 Stationary source emissions - Guidance on the application of EN 14181:2004
EN 12271:2006 Surface dressing - Requirements
EN 12259-3:2000/A2:2005 FIXED FIREFIGHTING SYSTEMS - COMPONENTS FOR SPRINKLER AND WATER SPRAY SYSTEMS - PART 3: DRY ALARM VALVE ASSEMBLIES
EN 1090-1:2009+A1:2011 Execution of steel structures and aluminium structures - Part 1: Requirements for conformity assessment of structural components
EN 13422:2004+A1:2009 Vertical road signs - Portable deformable warning devices and delineators - Portable road traffic signs - Cones and cylinders
EN 45510-6-2 : 1998 GUIDE FOR PROCUREMENT OF POWER STATION EQUIPMENT - PART 6-2: TURBINE AUXILIARIES - FEEDWATER HEATERS
EN 13341:2005+A1:2011 Static thermoplastic tanks for above ground storage of domestic heating oils, kerosene and diesel fuels - Blow moulded and rotationally moulded polyethylene tanks and rotationally moulded tanks made of anionically polymerized polyamide 6 - Requirements and test methods
EN 124-5:2015 Gully tops and manhole tops for vehicular and pedestrian areas - Part 5: Gully tops and manhole tops made of composite materials
CR ISO 17663 : 2001 WELDING - GUIDELINES FOR QUALITY REQUIREMENTS FOR HEAT TREATMENT IN CONNECTION WITH WELDING AND ALLIED PROCESSES
EN 12735-2:2016 Copper and copper alloys - Seamless, round tubes for air conditioning and refrigeration - Part 2: Tubes for equipment
CEN/TS 1455-2:2012 Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Acrylonitrile-butadiene-styrene (ABS) - Part 2: Guidance for the assessment of conformity
CEN Guide 4:2008 GUIDE FOR ADDRESSING ENVIRONMENTAL ISSUES IN PRODUCT STANDARDS
EN 508-3:2008 Roofing products from metal sheet - Specification for self-supporting products of steel, aluminium or stainless steel sheet - Part 3: Stainless steel
EN 62246-2:2008 Reed contact units - Part 2: Heavy-duty reed switches
EN 60966-1:1999 Radio frequency and coaxial cable assemblies - Part 1: Generic specification - General requirements and test methods
EN 61400-3:2009 Wind turbines - Part 3: Design requirements for offshore wind turbines
EN 61557-15:2014 Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. - Equipment for testing, measuring or monitoring of protective measures - Part 15: Functional safety requirements for insulation monitoring devices in IT systems and equipment for insulation fault location in IT systems
CEN/TS 16850:2015 Societal and Citizen Security - Guidance for managing security in healthcare facilities
EN 61284:1997 Overhead lines - Requirements and tests for fittings
DIN EN 13915:2017-09 PREFABRICATED GYPSUM PLASTERBOARD PANELS WITH A CELLULAR PAPERBOARD CORE - DEFINITIONS, REQUIREMENTS AND TEST METHODS
DIN EN ISO 16140:2011-12 MICROBIOLOGY OF FOOD AND ANIMAL FEEDING STUFFS - PROTOCOL FOR THE VALIDATION OF ALTERNATIVE METHODS (ISO 16140:2003 + AMD.1:2011)
CEN/TR 16478:2012 Surveillance from first commissioning on measuring devices used in natural gas supply to the installations of the activities under the Directive 2003/87/EC establishing a scheme of CO2 emissions trading
EN 60746-1:2003 Expression of performance of electrochemical analyzers - Part 1: General
CEN/TS 15234:2006 Solid biofuels - Fuel quality assurance
EN 61189-5-4:2015 Test methods for electrical materials, printed boards and other interconnection structures and assemblies - Part 5-4: General test methods for materials and assemblies - Solder alloys and fluxed and non-fluxed solid wire for printed board assemblies
EN 61174:2015 Maritime navigation and radiocommunication equipment and systems - Electronic chart display and information system (ECDIS) - Operational and performance requirements, methods of testing and required test results
EN 13616:2004/AC:2006 OVERFILL PREVENTION DEVICES FOR STATIC TANKS FOR LIQUID PETROLEUM FUELS
EN 877:1999/A1:2006/AC:2008 CAST IRON PIPES AND FITTINGS, THEIR JOINTS AND ACCESSORIES FOR THE EVACUATION OF WATER FROM BUILDINGS - REQUIREMENTS, TEST METHODS AND QUALITY ASSURANCE
EN 12094-12:2003 Fixed firefighting systems - Components for gas extinguishing systems - Part 12: Requirements and test methods for pneumatic alarm devices
EN 12951:2004 Prefabricated accessories for roofing - Permanently fixed roof ladders - Product specification and test methods
EN 13257:2016 Geotextiles and geotextile-related products - Characteristics required for use in solid waste disposals
EN 13024-2:2004 Glass in building - Thermally toughened borosilicate safety glass - Part 2: Evaluation of conformity/Product standard
UNI EN 508-1 : 2014 ROOFING AND CLADDING PRODUCTS FROM METAL SHEET - SPECIFICATION FOR SELF-SUPPORTING OF STEEL, ALUMINIUM OR STAINLESS STEEL SHEET - PART 1: STEEL
EN 13290-1:1999 Space project management - General requirements - Part 1: Policy and principles
EN 1319:2009 Domestic gas-fired forced convection air heaters for space heating, with fan-assisted burners not exceeding a net heat input of 70 kW
EN 12109:1999 Vacuum drainage systems inside buildings
CLC/TR 50506-1:2007 Railway applications - Communication, signalling and processing systems - Application Guide for EN 50129 - Part 1: Cross-acceptance
EN 50290-2-20:2016 Communication cables - Part 2-20: Common design rules and construction - General
EN 13348:2016 Copper and copper alloys - Seamless, round copper tubes for medical gases or vacuum
EN 13249:2016 Geotextiles and geotextile-related products - Characteristics required for use in the construction of roads and other trafficked areas (excluding railways and asphalt inclusion)
EN 12050-2:2015 Wastewater lifting plants for buildings and sites - Part 2: Lifting plants for faecal-free wastewater
EN 12385-6:2004 Steel wire ropes - Safety - Part 6: Stranded ropes for mine shafts
EN 12690:1999 Biotechnology - Performance criteria for shaft seals
EN 1337-4:2004/AC:2007 STRUCTURAL BEARINGS - PART 4: ROLLER BEARINGS
EN 15331:2011 Criteria for design, management and control of maintenance services for buildings
I.S. EN 61191-1:2013 PRINTED BOARD ASSEMBLIES - PART 1: GENERIC SPECIFICATION - REQUIREMENTS FOR SOLDERED ELECTRICAL AND ELECTRONIC ASSEMBLIES USING SURFACE MOUNT AND RELATED ASSEMBLY TECHNOLOGIES (IEC 61191-1:2013 (EQV))
EN 13229:2001/A2:2004/AC:2007 INSET APPLIANCES INCLUDING OPEN FIRES FIRED BY SOLID FUELS - REQUIREMENTS AND TEST METHODS
EN 13347:2002 Copper and copper alloys - Rod and wire for welding and braze welding
EN 12763:2000 Fibre-cement pipes and fittings for discharge systems for buildings - Dimensions and technical terms of delivery
EN 1337-6:2004 Structural bearings - Part 6: Rocker bearings
EN 61189-5-3:2015 Test methods for electrical materials, printed boards and other interconnection structures and assemblies - Part 5-3: General test methods for materials and assemblies - Soldering paste for printed board assemblies
EN 13479:2017 Welding consumables - General product standard for filler metals and fluxes for fusion welding of metallic materials
EN 14250:2010 Timber structures - Product requirements for prefabricated structural members assembled with punched metal plate fasteners
EN 12094-3:2003 Fixed firefighting systems - Components for gas extinguishing systems - Part 3: Requirements and test methods for manual triggering and stop devices
EN 12385-1:2002+A1:2008 Steel wire ropes - Safety - Part 1: General requirements
EN 12094-13:2001/AC:2002 FIXED FIREFIGHTING SYSTEMS - COMPONENTS FOR GAS EXTINGUISHING SYSTEMS - PART 13: REQUIREMENTS AND TEST METHODS FOR CHECK VALVES AND NON-RETURN VALVES
EN 1168:2005+A3:2011 Precast concrete products - Hollow core slabs
EN 12094-2:2003 Fixed firefighting systems - Components for gas extinguishing systems - Part 2: Requirements and test methods for non-electrical automatic control and delay devices
EN 12451:2012 Copper and copper alloys - Seamless, round tubes for heat exchangers
CEN/TS 1591-4:2007 Flanges and their joints - Design rules for gasketed circular flange connections - Part 4: Qualification of personnel competency in the assembly of bolted joints fitted to equipment subject to the Pressure Equipment Directive
EN 12385-9:2002 Steel wire ropes - Safety - Part 9: Locked coil carrying ropes for cableway installations designed to carry persons
EN 12953-2:2012 Shell boilers - Part 2: Materials for pressure parts of boilers and accessories
EN 12101-2:2017 Smoke and heat control systems - Part 2: Natural smoke and heat exhaust ventilators
EN 12566-1:2016 Small wastewater treatment systems for up to 50 PT - Part 1: Prefabricated septic tanks
EN 12101-7:2011 Smoke and heat control systems - Part 7: Smoke duct sections
EN 12094-8:2006 Fixed firefighting systems - Components for gas extinguishing systems - Part 8: Requirements and test methods for connectors
EN 13108-21:2016 Bituminous mixtures - Material specifications - Part 21: Factory Production Control
CR 13576 : 1999 IMPLEMENTATION OF EN 729 ON QUALITY REQUIREMENTS FOR FUSION WELDING OF METALLIC MATERIALS
EN 12050-4:2015 Wastewater lifting plants for buildings and sites - Part 4: Non-return valves for faecal-free wastewater and wastewater containing faecal matter
EN 12186:2014 Gas infrastructure - Gas pressure regulating stations for transmission and distribution - Functional requirements
UNI EN ISO 3834-1 : 2006 QUALITY REQUIREMENTS FOR FUSION WELDING OF METALLIC MATERIALS - PART 1: CRITERIA FOR THE SELECTION OF THE APPROPRIATE LEVEL OF QUALITY REQUIREMENTS
EN 12899-3:2007 Fixed, vertical road traffic signs - Part 3: Delineator posts and retroreflectors
EN 1304:2013 Clay roofing tiles and fittings - Product definitions and specifications
EN 12094-10:2003 Fixed firefighting systems - Components for gas extinguishing systems - Part 10: Requirements and test methods for pressure gauges and pressure switches
EN 12094-6:2006 Fixed firefighting systems - Components for gas extinguishing systems - Part 6: Requirements and test methods for non-electrical disable devices
EN 13254:2016 Geotextiles and geotextile-related products - Characteristics required for the use in the construction of reservoirs and dams
EN 15358:2011 Solid recovered fuels - Quality management systems - Particular requirements for their application to the production of solid recovered fuels
ONORM EN 1555-1 : 2015 PLASTICS PIPING SYSTEMS FOR THE SUPPLY OF GASEOUS FUELS - POLYETHYLENE (PE) - PART 1: GENERAL
DIN EN 12004-1:2017-05 ADHESIVES FOR CERAMIC TILES - PART 1: REQUIREMENTS, ASSESSMENT AND VERIFICATION OF CONSTANCY OF PERFORMANCE, CLASSIFICATION AND MARKING
EN 13160-4:2016 Leak detection systems - Part 4: Requirements and test/assessment methods for sensor based leak detection systems
CLC/TR 50506-2 : 2009 RAILWAY APPLICATIONS - COMMUNICATION, SIGNALLING AND PROCESSING SYSTEMS - APPLICATION GUIDE FOR EN 50129 - PART 2: SAFETY ASSURANCE
I.S. EN ISO 14922-1:1999 THERMAL SPRAYING - QUALITY REQUIREMENTS OF THERMALLY SPRAYED STRUCTURES - PART 1: GUIDANCE FOR SELECTION AND USE
DIN EN 15224:2017-05 QUALITY MANAGEMENT SYSTEMS - EN ISO 9001:2015 FOR HEALTHCARE
ASME B16.25 : 2017 BUTTWELDING ENDS
ASME NQA 1 : 2017 QUALITY ASSURANCE REQUIREMENTS FOR NUCLEAR FACILITY APPLICATIONS
DEFSTAN 00-55(PT1)/3(2014) : 2014 REQUIREMENTS FOR SAFETY OF PROGRAMMABLE ELEMENTS (PE) IN DEFENCE SYSTEMS - PART 1: REQUIREMENTS AND GUIDANCE
ASME A17.6 : 2010 STANDARD FOR ELEVATOR SUSPENSION, COMPENSATION, AND GOVERNOR SYSTEMS
BS OHSAS 18001:2007 Occupational health and safety management systems. Requirements
SBAC TS 157 : 6 AEROSPACE SECTOR CERTIFICATION SCHEME (ASCS) - REQUIREMENTS AND PROCEDURES
IPC SPVC-LAT1 : 2010 ANALYTICAL PROCEDURES FOR PORTABLE LEAD-FREE ALLOY TEST DATA
ASME B16.11 : 2016 FORGED FITTINGS, SOCKET-WELDING AND THREADED
IPC J STD 005 RUSSIAN : A REQUIREMENTS FOR SOLDERING FLUXES
IPC J STD 004 RUSSIAN : B REQUIREMENTS FOR SOLDERING FLUXES
ASME AG-1 : 2019 CODE ON NUCLEAR AIR AND GAS TREATMENT
CEI EN 60115-1:2023 Fixed resistors for use in electronic equipment Part 1: Generic specification
ASME B16.34 : 2017 VALVES - FLANGED, THREADED, AND WELDING END
ASME B16.25:2022 Buttwelding Ends
ASME B16.42 : 2016 DUCTILE IRON PIPE FLANGES AND FLANGED FITTINGS - CLASSES 150 AND 300
IPC 1601 GERMAN : - PRINTED BOARD HANDLING AND STORAGE GUIDELINES
ACMP-2009-SRD-10 : A2017 NATO CM TRAINING PACKAGE
DEFSTAN 00-56(PT1)/5(2014) : 2014 SAFETY MANAGEMENT REQUIREMENTS FOR DEFENCE SYSTEMS - PART 1: REQUIREMENTS AND GUIDANCE
ASME B16.22 : 2013 WROUGHT COPPER AND COPPER ALLOY SOLDER-JOINT PRESSURE FITTINGS
VDI/VDE 3516 Blatt 5:2017-08 (Draft) Validation in the GxP area - Types of raw data
IPC 9592 : B REQUIREMENTS FOR POWER CONVERSION DEVICES FOR THE COMPUTER AND TELECOMMUNICATIONS INDUSTRIES
DEFSTAN 05-10(PT0)/5(2006) : 2006 PRODUCT DEFINITION INFORMATION - PART 0: GENERAL INTRODUCTION TO PRODUCT DEFINITION INFORMATION
IPC 4412 : B SPECIFICATION FOR FINISHED FABRIC WOVEN FROM 'E' GLASS FOR PRINTED BOARDS
DEFSTAN 00-056(PT2)/5(2017) : 2017 SAFETY MANAGEMENT REQUIREMENTS FOR DEFENCE SYSTEMS - PART 2: GUIDANCE ON ESTABLISHING A MEANS OF COMPLYING WITH PART 1
DEFSTAN 00-56(PT2)/2(1996) : 1996 SAFETY MANAGEMENT REQUIREMENTS FOR DEFENCE SYSTEMS - PART 2: GUIDANCE
ASME AG 1 : 2012 CODE ON NUCLEAR AIR AND GAS TREATMENT
DEFSTAN 02-884/2(2015) : 2015 SUBMARINE ENTERPRISE STANDARD QUALITY REQUIREMENTS
ASME B16.9 : 2012 FACTORY-MADE WROUGHT BUTTWELDING FITTINGS
IPC 4412 CHINESE : B SPECIFICATION FOR FINISHED FABRIC WOVEN FROM 'E' GLASS FOR PRINTED BOARDS
IPC J STD 004 CHINESE : B REQUIREMENTS FOR SOLDERING FLUXES
DEFSTAN 23-6/3(2000) : 2000 GUIDE TO THE COMMON TECHNICAL REQUIREMENTS FOR MILITARY LOGISTIC VEHICLES AND TOWED EQUIPMENT
ASME B16.29 : 2017 Wrought Copper and Wrought Copper Alloy Solder-Joint Drainage Fittings--DWV
VDI 3475 Blatt 2:2005-12 Emission control - Facilities for biological waste - Composting an anaerobic (co-)digestion - Plant capacities up to approx. 6000 Mg/a
IPC J STD 006 CHINESE : B-2 REQUIREMENTS FOR ELECTRONIC GRADE SOLDER ALLOYS AND FLUXED AND NON-FLUXED SOLID SOLDERS FOR ELECTRONIC SOLDERING APPLICATIONS
IPC J STD 005 : A REQUIREMENTS FOR SOLDERING PASTES
IPC J STD 005 CHINESE : A REQUIREMENTS FOR SOLDERING PASTES
ASME B16.48 : 2015 LINE BLANKS
DEFSTAN 00-56(PT1)/6(2015) : 2015 SAFETY MANAGEMENT REQUIREMENTS FOR DEFENCE SYSTEMS - PART 1: REQUIREMENTS AND GUIDANCE
API SPEC 6D:2021+ERR 3:2023 Specification for Valves
ANSI/AWWA E200:2023 Progressive Cavity Chemical Metering Pumps
18/30371677 DC : DRAFT MAY 2018 BS EN 1401-1 - PLASTICS PIPING SYSTEMS FOR NON-PRESSURE UNDERGROUND DRAINAGE AND SEWERAGE - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) - PART 1: SPECIFICATIONS FOR PIPES, FITTINGS AND THE SYSTEMS
ISO/IEC 21827:2008 Information technology Security techniques Systems Security Engineering Capability Maturity Model (SSE-CMM)
DIN EN 15221-3:2011-12 Facility Management - Part 3: Guidance on quality in Facility Management
BS EN 15283-1 : 2008 GYPSUM BOARDS WITH FIBROUS REINFORCEMENT - DEFINITIONS, REQUIREMENTS AND TEST METHODS - PART 1: GYPSUM BOARDS WITH MAT REINFORCEMENT
PREN ISO 19900 : DRAFT 2012 PETROLEUM AND NATURAL GAS INDUSTRIES - GENERAL REQUIREMENTS FOR OFFSHORE STRUCTURES (ISO/DIS 19900:2012)
PREN 1871 : DRAFT 2012 ROAD MARKING MATERIALS - PAINT, THERMOPLASTIC AND COLD PLASTIC MATERIALS - SPECIFICATIONS
DIN EN 54-22 E : 2015 FIRE DETECTION AND FIRE ALARM SYSTEMS - PART 22: RESETTABLE LINE-TYPE HEAT DETECTORS
ISO/TR 22869:2005 Medical laboratories Guidance on laboratory implementation of ISO 15189: 2003
DIN EN 1591-4:2013-12 Flanges and their joints - Part 4: Qualification of personnel competency in the assembly of the bolted connections of critical service pressurized systems
ISO 13411:1997 Aerospace — Airframe needle roller, cylindrical roller and track roller bearings — Technical specification
EN 13600:2013 Copper and copper alloys - Seamless copper tubes for electrical purposes
PREN 14188-2 : DRAFT 2014 JOINT FILLERS AND SEALANTS - PART 2: SPECIFICATIONS FOR COLD APPLIED SEALANTS
PREN 1422 : DRAFT 2011 STERILIZERS FOR MEDICAL PURPOSES - ETHYLENE OXIDE STERILIZERS - REQUIREMENTS AND TEST METHODS
DIN EN 16582-2:2015-11 DOMESTIC SWIMMING POOLS - PART 2: SPECIFIC REQUIREMENTS INCLUDING SAFETY AND TEST METHODS FOR INGROUND POOLS
DIN EN 16853 E : 2017 CONSERVATION OF CULTURAL HERITAGE - CONSERVATION PROCESS - DECISION MAKING, PLANNING AND IMPLEMENTATION
BS EN 12261:2002 Gas meters. Turbine gas meters
UNI EN 16309 : 2014-10 SUSTAINABILITY OF CONSTRUCTION WORKS - ASSESSMENT OF SOCIAL PERFORMANCE OF BUILDINGS - CALCULATION METHODOLOGY
15/30265353 DC : 0 BS EN 62271-1 ED 2 - HIGH-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 1: COMMON SPECIFICATIONS FOR ALTERNATING CURRENT SWITCHGEAR AND CONTROLGEAR
12/30235270 DC : 0 BS EN 50126-2 - RAILWAY APPLICATIONS - THE SPECIFICATION AND DEMONSTRATION OF RELIABILITY, AVAILABILITY, MAINTAINABILITY AND SAFETY (RAMS) - PART 2: SYSTEMS APPROACH TO SAFETY
BS ISO 27914:2017 Carbon dioxide capture, transportation and geological storage. Geological storage
02/560598 DC : DRAFT FEB 2002 ISO/DIS 13485 - QUALITY SYSTEMS - MEDICAL DEVICES - SYSTEM REQUIREMENTS FOR REGULATORY PURPOSES
15/30328778 DC : 0 BS EN 13251 - GEOTEXTILES AND GEOTEXTILE-RELATED PRODUCTS - CHARACTERISTICS REQUIRED FOR USE IN EARTHWORKS, FOUNDATIONS AND RETAINING STRUCTURES
DIN EN 10088-4:2010-01 Stainless steels - Part 4: Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for construction purposes
UNE-EN 13674-4:2007 Railway applications - Track - Rail - Part 4: Vignole railway rails from 27 kg/m to, but excluding 46 kg/m
05/30097505 DC : 0 PREN 15343 - PLASTICS - RECYCLED PLASTICS - PLASTICS RECYCLING TRACEABILITY AND ASSESSMENT OF CONFORMITY AND RECYCLED CONTENT
DIN EN 16590-1 E : 2014 TRACTORS AND MACHINERY FOR AGRICULTURE AND FORESTRY - SAFETY-RELATED PARTS OF CONTROL SYSTEMS - PART 1: GENERAL PRINCIPLES FOR DESIGN AND DEVELOPMENT (ISO 25119-1:2010 MODIFIED)
ASTM F 3201 : 2016 Standard Practice for Ensuring Dependability of Software Used in Unmanned Aircraft Systems (UAS)
I.S. EN 15497:2014 STRUCTURAL FINGER JOINTED SOLID TIMBER - PERFORMANCE REQUIREMENTS AND MINIMUM PRODUCTION REQUIREMENTS
ISO 21927-2:2006 Smoke and heat control systems Part 2: Specification for natural smoke and heat exhaust ventilators
BS EN 15821:2010 Multi-firing sauna stoves fired by natural wood logs. Requirements and test methods
BS IEC 60076-8:1997 Power transformers Application guide
I.S. EN 16475-2:2017 CHIMNEYS - ACCESSORIES - PART 2: CHIMNEY FANS - REQUIREMENTS AND TEST METHODS
S.R. CEN/TS 16880:2015 SERVICE EXCELLENCE - CREATING OUTSTANDING CUSTOMER EXPERIENCES THROUGH SERVICE EXCELLENCE
12/30258747 DC : DRAFT MAR 2012 BS EN 12583 - GAS INFRASTRUCTURE - COMPRESSOR STATIONS - FUNCTIONAL REQUIREMENTS
DIN EN 16034:2014-12 PEDESTRIAN DOORSETS, INDUSTRIAL, COMMERCIAL, GARAGE DOORS AND OPENABLE WINDOWS - PRODUCT STANDARD, PERFORMANCE CHARACTERISTICS - FIRE RESISTANCE AND/OR SMOKE CONTROL CHARACTERISTICS
API 5L RUSSIAN : 2012 SPECIFICATION FOR LINE PIPE
04/30103157 DC : DRAFT MARCH 2004 BS EN 12094-8 - FIXED FIREFIGHTING SYSTEMS - COMPONENTS FOR GAS EXTINGUISHING SYSTEMS - PART 8 - REQUIREMENTS AND TEST METHODS FOR FLEXIBLE CONNECTORS
BS EN 15213-4:2013 Intelligent transport systems. After-theft systems for the recovery of stolen vehicles Interface and system requirements in terms of long range communication system
CEI UNI EN 45510-6-7 : 2000 GUIDE FOR PROCUREMENT OF POWER STATION EQUIPMENT - PART 6-7: TURBINE AUXILIARIES - MOISTURE SEPARATOR REHEATERS
14/30295030 DC : 0 BS ISO/IEC 17021-1 - CONFORMITY ASSESSMENT - REQUIREMENTS FOR BODIES PROVIDING AUDIT AND CERTIFICATION OF MANAGEMENT SYSTEMS - PART 1: REQUIREMENTS
DIN EN 16309:2014-12 SUSTAINABILITY OF CONSTRUCTION WORKS - ASSESSMENT OF SOCIAL PERFORMANCE OF BUILDINGS - CALCULATION METHODOLOGY
BS ISO 29400:2015 Ships and marine technology. Offshore wind energy. Port and marine operations
11/30191093 DC : 0 BS ISO 10799-1 - COLD FORMED WELDED STRUCTURAL HOLLOW SECTIONS OF NON-ALLOY AND FINE GRAIN STEELS - PART 1: TECHNICAL DELIVERY CONDITIONS
CSA ISO/IEC 90003 : 2004 SOFTWARE ENGINEERING - GUIDELINES FOR THE APPLICATION OF ISO 9001:2000 TO COMPUTER SOFTWARE
PD ISO/TS 14033:2012 Environmental management. Quantitative environmental information. Guidelines and examples
BS EN 1591-4:2013 Flanges and their joints Qualification of personnel competency in the assembly of the bolted connections of critical service pressurized systems
ISO 11133:2014 Microbiology of food, animal feed and water — Preparation, production, storage and performance testing of culture media
UNI CEN/TS 1452-7 : 2014 PLASTICS PIPING SYSTEMS FOR WATER SUPPLY AND FOR BURIED AND ABOVE-GROUND DRAINAGE AND SEWERAGE UNDER PRESSURE - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) - PART 7: GUIDANCE FOR THE ASSESSMENT OF CONFORMITY
ISO 13918:2017 Welding — Studs and ceramic ferrules for arc stud welding
14/30295890 DC : 0 BS EN 1330-1 - NON-DESTRUCTIVE TESTING - TERMINOLOGY - PART 1: LIST OF GENERAL TERMS
BS ISO 26262-1:2011 Road vehicles. Functional safety Vocabulary
BS ISO 10955:1999 End-fittings and turnbarrels for aircraft control wire rope. Technical specification
10/30197164 DC : 0 BS ISO 11893 - SPACE SYSTEMS - PROGRAMME MANAGEMENT - PROJECT ORGANIZATION
07/30162632 DC : 0 BS ISO 4642-2 - RUBBER AND PLASTICS HOSES, NON-COLLAPSIBLE, FOR FIRE-FIGHTING SERVICE - PART 2: SEMI-RIGID HOSES (AND HOSE ASSEMBLIES) FOR PUMPS AND VEHICLES
AAMI ISO 20857 : 2010 STERILIZATION OF HEALTH CARE PRODUCTS - DRY HEAT - REQUIREMENTS FOR THE DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES
BS ISO 24510:2007 Activities relating to drinking water and wastewater services. Guidelines for the assessment and for the improvement of the service to users
BS EN ISO 14253-2:2011 Geometrical product specifications (GPS). Inspection by measurement of workpieces and measuring equipment Guidance for the estimation of uncertainty in GPS measurement, in calibration of measuring equipment and in product verification
BS PD ISO/TR 13881 : 2001 PETROLEUM AND NATURAL GAS INDUSTRIES - CLASSIFICATION AND CONFORMITY ASSESSMENT OF PRODUCTS, PROCESSES AND SERVICES
BS ISO/IEC 15423:2004 Information technology. Automatic identification and data capture techniques. Bar code scanner and decoder performance testing
BS ISO 17258:2015 Statistical methods. Six Sigma. Basic criteria underlying benchmarking for Six Sigma in organisations
BS EN ISO 20857:2013 Sterilization of health care products. Dry heat. Requirements for the development, validation and routine control of a sterilization process for medical devices
06/30123954 DC : DRAFT MAR 2006
BS EN 4137:2009 Aerospace series. Bolts, normal bi-hexagonal head, stepped shank, long thread, in titanium alloy, anodized, MoS2 lubricated. Classification: 1100 MPa (at ambient temperature)/315°C
SAE AS 7107 : 2017 NATIONAL AEROSPACE AND DEFENSE CONTRACTORS ACCREDITATION PROGRAM INSPECTION SYSTEM REQUIREMENTS
CSA Z245.20 SERIES : 2014 PLANT-APPLIED EXTERNAL COATINGS FOR STEEL PIPE
DIN EN 16114:2011-12 MANAGEMENT CONSULTANCY SERVICES
PREN 14915 : DRAFT 2013 SOLID WOOD PANELLING AND CLADDING - CHARACTERISTICS, EVALUATION OF CONFORMITY AND MARKING
04/19988807 DC : DRAFT AUG 2004 BS EN 14991 - PRECAST CONCRETE PRODUCTS - FOUNDATION ELEMENTS
10/30218554 DC : 0 BS ISO 13926-3 - PEN SYSTEMS - PART 3: SEALS FOR PEN-INJECTORS FOR MEDICAL USE
CSA Z24510 : 2010 : R2014 ACTIVITIES RELATING TO DRINKING WATER AND WASTEWATER SERVICES - GUIDELINES FOR THE ASSESSMENT AND FOR THE IMPROVEMENT OF THE SERVICE TO USERS
BIS IS/ISO/TR 10013 : 2001(R2011) GUIDELINES FOR QUALITY MANAGEMENT SYSTEM DOCUMENTATION
ISO/IEC/IEEE 26513:2017 Systems and software engineering — Requirements for testers and reviewers of information for users
CSA Z259.2.3 : 2016 DESCENT DEVICES
14/30311660 DC : 0 BS EN 9139 - AEROSPACE SERIES - QUALITY MANAGEMENT SYSTEMS - DEVELOPMENT OF PROCESS-BASED BODIES OF KNOWLEDGE
DD ISO/TS 10004:2010 Quality management. Customer satisfaction. Guidelines for monitoring and measuring
SAE AS 7115 : 2017 NATIONAL AEROSPACE AND DEFENSE CONTRACTORS ACCREDITATION PROGRAM REQUIREMENTS FOR ELASTOMER SEALS
14/30311447 DC : 0 BS EN 14055:2010/AMD 1 - WC AND URINAL FLUSHING CISTERNS
BS EN ISO/IEC 17021:2011 Conformity assessment. Requirements for bodies providing audit and certification of management systems
API SPEC 20E : 2017 ALLOY AND CARBON STEEL BOLTING FOR USE IN THE PETROLEUM AND NATURAL GAS INDUSTRIES
EN 12764:2015 Sanitary appliances - Specification for whirlpool baths
I.S. EN 16590-3:2014 TRACTORS AND MACHINERY FOR AGRICULTURE AND FORESTRY - SAFETY-RELATED PARTS OF CONTROL SYSTEMS - PART 3: SERIES DEVELOPMENT, HARDWARE AND SOFTWARE (ISO 25119-3:2010 MODIFIED)
DIN EN 16590-2:2014-11 Tractors and machinery for agriculture and forestry - Safety-related parts of control systems - Part 2: Concept phase (ISO 25119-2:2010 modified)
I.S. EN 4137:2009 AEROSPACE SERIES - BOLTS, NORMAL BI-HEXAGONAL HEAD, STEPPED SHANK, LONG THREAD, IN TITANIUM ALLOY, ANODIZED, MOS[2] LUBRICATED - CLASSIFICATION: 1100 MPA (AT AMBIENT TEMPERATURE)/315 DEGREES C
PD IEC/TS 62564-1:2016 Process management for avionics. Aerospace qualified electronic components (AQEC) Integrated circuits and discrete semiconductors
UNE-EN 15683-2:2014 Glass in building - Thermally toughened soda lime silicate channel shaped safety glass - Part 2: Evaluation of conformity/Product standard
BS ISO 10006:2017 Quality management. Guidelines for quality management in projects
AAMI HE74 : 2001 HUMAN FACTORS DESIGN PROCESS FOR MEDICAL DEVICES
I.S. EN 13407:2015 WALL-HUNG URINALS - FUNCTIONAL REQUIREMENTS AND TEST METHODS
S.R. CEN ISO/TS 22391-7:2011 PLASTICS PIPING SYSTEMS FOR HOT AND COLD WATER INSTALLATIONS - POLYETHYLENE OF RAISED TEMPERATURE RESISTANCE (PE-RT) - PART 7: GUIDANCE FOR THE ASSESSMENT OF CONFORMITY (ISO/TS 22391-7:2011)
S.R. CLC/TR 50503:2010 GUIDELINES FOR THE INVENTORY CONTROL, MANAGEMENT, DECONTAMINATION AND/OR DISPOSAL OF ELECTRICAL EQUIPMENT AND INSULATING LIQUIDS CONTAINING PCBS
ISO/IEC 25010:2011 Systems and software engineering — Systems and software Quality Requirements and Evaluation (SQuaRE) — System and software quality models
I.S. EN ISO 10418:2003 PETROLEUM AND NATURAL GAS INDUSTRIES - OFFSHORE PRODUCTION INSTALLATIONS - ANALYSIS, DESIGN, INSTALLATION AND TESTING OF BASIC SURFACE PROCESS SAFETY SYSTEMS
UNE-EN 124-4:2015 Gully tops and manhole tops for vehicular and pedestrian areas - Part 4: Gully tops and manhole tops made of steel reinforced concrete
BS EN 4129:2009 Aerospace series. Bolts, normal hexagonal head, coarse tolerance normal shank, medium length thread, in alloy steel, cadmium plated. Classification: 1100 MPa (at ambient temperature) / 235°C
BS ISO 28004-1:2007 Security management systems for the supply chain. Guidelines for the implementation of ISO 28000
UNE 179008:2016 Quality management system for liver transplantation units
SAE AS 9115 : 2017 QUALITY MANAGEMENT SYSTEMS - REQUIREMENTS FOR AVIATION, SPACE, AND DEFENSE ORGANIZATIONS - DELIVERABLE SOFTWARE (SUPPLEMENT TO 9100:2016)
13/30266550 DC : 0 BS EN 14509 - SELF-SUPPORTING DOUBLE SKIN METAL FACED INSULATING PANELS - FACTORY MADE PRODUCTS - SPECIFICATIONS
DIN EN 15821:2011-01 Multi-firing sauna stoves fired by natural wood logs - Requirements and test methods
NSF 457 : 2017 SUSTAINABILITY LEADERSHIP STANDARD FOR PHOTOVOLTAIC MODULES
BS 5750-14:1993 Quality systems Guide to dependability programme management
DIN EN 13480 Beiblatt 1:2002-08 Metallic industrial piping - Part 7: Guidance on the use of conformity assessment procedures
API TR 1PER15K-1 : 2013 PROTOCOL FOR VERIFICATION AND VALIDATION OF HIGH-PRESSURE HIGH-TEMPERATURE EQUIPMENT
11/30249117 DC : 0 BS EN 14342 - WOOD FLOORING - CHARACTERISTICS, EVALUATION OF CONFORMITY AND MARKING
PD ISO/PAS 28007:2012 Ships and marine technology. Guidelines for Private Maritime Security Companies (PMSC) providing privately contracted armed security personnel (PCASP) on board ships (and pro forma contract)
PD ISO/TR 10013:2001 Guidelines for quality management system documentation
14/30272945 DC : 0 BS ISO 18400-103 - SOIL QUALITY - SAMPLING - PART 103: SAFETY
ISO 50001:2011 Energy management systems Requirements with guidance for use
I.S. EN 13616-2:2016 OVERFILL PREVENTION DEVICES FOR STATIC TANKS FOR LIQUID FUELS - PART 2: OVERFILL PREVENTION DEVICES WITHOUT A CLOSURE DEVICE
08/30184309 DC : DRAFT SEP 2008 BS EN 12952-5 - WATER-TUBE BOILERS AND AUXILIARY INSTALLATIONS - PART 5: WORKMANSHIP AND CONSTRUCTION OF PRESSURE PARTS OF THE BOILER
UNE-EN 14636-1:2010 Plastics piping systems for non-pressure drainage and sewerage - Polyester resin concrete (PRC) - Part 1: Pipes and fittings with flexible joints
12/30262894 DC : 0 BS EN 14180 - STERILIZERS FOR MEDICAL PURPOSES - LOW TEMPERATURE STEAM AND FORMALDEHYDE STERILIZERS - REQUIREMENTS AND TESTING
DD CEN/TS 14816:2008 Fixed firefighting systems. Water spray systems. Design and installation
BS ISO 27025:2010 Space systems. Programme management. Quality assurance requirements
17/30321076 DC : 0 BS ISO 22000 - FOOD SAFETY MANAGEMENT SYSTEMS - REQUIREMENTS FOR ANY ORGANIZATION IN THE FOOD CHAIN
NFPA 197 : 2018 Standard on Protective Ensembles for Structural Fire Fighting and Proximity Fire Fighting
TR 102 847 : 1.1.1 USER GROUP; QUALITY OF ICT SERVICES; STANDARDIZATION AND REGULATION REFERENCES IN THE METERING AND BILLING AREA
DIN EN ISO 3266:2016-05 FORGED STEEL EYEBOLTS GRADE 4 FOR GENERAL LIFTING PURPOSES (ISO 3266:2010 + AMD 1:2015)
I.S. EN ISO 17665-1:2006 STERILIZATION OF HEALTH CARE PRODUCTS - MOIST HEAT - PART 1: REQUIREMENTS FOR THE DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES
ISO 10018:2012 Quality management Guidelines on people involvement and competence
UNI CEI 70019 : 2008 CONFORMITY ASSESSMENT - ARRANGEMENTS FOR THE RECOGNITION AND ACCEPTANCE OF CONFORMITY ASSESSMENT RESULTS
BS IEC 60092-306:2009 Electrical installations in ships Equipment. Luminaires and lighting accessories
DD CEN ISO/TS 21432:2005 Non-destructive testing. Standard test method for determining residual stresses by neutron diffraction
CSA PLUS 15189 : 2010 THE ISO 15189:2007 ESSENTIALS - A PRACTICAL HANDBOOK FOR IMPLEMENTING THE ISO 15189:2007 STANDARD FOR MEDICAL LABORATORIES
15/30318290 DC : 0 BS EN ISO 17662 - WELDING - CALIBRATION, VERIFICATION AND VALIDATION OF EQUIPMENT USED FOR WELDING, INCLUDING ANCILLARY ACTIVITIES
UNI EN 15343 : 2008 PLASTICS - RECYCLED PLASTICS - PLASTICS RECYCLING TRACEABILITY AND ASSESSMENT OF CONFORMITY AND RECYCLED CONTENT
I.S. EN 50575:2014 POWER, CONTROL AND COMMUNICATION CABLES - CABLES FOR GENERAL APPLICATIONS IN CONSTRUCTION WORKS SUBJECT TO REACTION TO FIRE REQUIREMENTS
16/30338105 DC : 0 BS EN 16994 - CLAY GEOSYNTHETIC BARRIERS - CHARACTERISTICS REQUIRED FOR USE AS A FLUID BARRIER IN THE CONSTRUCTION OF UNDERGROUND STRUCTURES (OTHER THAN TUNNELS AND ASSOCIATED STRUCTURES)
BS EN 15651-5:2017 Sealants for non-structural use in joints in buildings and pedestrian walkways Assessment and verification of constancy of performance, marking and labelling
I.S. EN 4074:2009 AEROSPACE SERIES - SCREWS, PAN HEAD, SIX LOBE RECESS, COARSE TOLERANCE NORMAL SHANK, MEDIUM LENGTH THREAD, IN TITANIUM ALLOY, ALUMINIUM IVD COATED - CLASSIFICATION: 1100 MPA (AT AMBIENT TEMPERATURE)/425 DEGREES C
PREN 14587-1 : DRAFT 2017 RAILWAY APPLICATIONS - INFRASTRUCTURE - FLASH BUTT WELDING OF NEW RAILS - PART 1: R220, R260, R260MN, R320CR, R350HT, R350LHT, R370CRHT AND R400HT GRADE RAILS IN A FIXED PLANT
ISO/TS 18864:2017 Health informatics — Quality metrics for detailed clinical models
15/30328933 DC : 0 BS EN 9100 - QUALITY MANAGEMENT SYSTEMS - REQUIREMENTS FOR AVIATION, SPACE AND DEFENSE ORGANIZATIONS
14/30292283 DC : 0 BS EN 13230-2 - RAILWAY APPLICATIONS - TRACK - CONCRETE SLEEPERS AND BEARERS - PART 2: PRESTRESSED MONOBLOCK SLEEPERS
DIN ISO 9000-3:1992-06 QUALITY MANAGEMENT AND QUALITY ASSURANCE STANDARDS - PART 3: GUIDELINES FOR THE APPLICATION OF ISO 9001 TO THE DEVELOPMENT, SUPPLY AND MAINTENANCE OF SOFTWARE
11/30203534 DC : DRAFT AUG 2011 BS ISO 13270 - STEEL FIBRES FOR CONCRETE - DEFINITIONS AND SPECIFICATIONS
TR 103 386 : 1.1.1 METHODS FOR TESTING AND SPECIFICATIONS (MTS) DEPLOYMENT OF MODEL-BASED AUTOMATED TESTING INFRASTRUCTURE IN A CLOUD
BS EN 50588-1:2017 Medium power transformers 50 Hz, with highest voltage for equipment not exceeding 36 kV General requirements
12/30264441 DC : 0 BS ISO 16049-2 - AIR CARGO EQUIPMENT - RESTRAINT STRAPS - PART 2: UTILIZATION GUIDELINES AND LASHING CONDITIONS
BS EN 62155:2003 Hollow pressurized and unpressurized ceramic and glass insulators for use in electrical equipment with rated voltages greater than 1000 V
ISO 14253-2:2011 Geometrical product specifications (GPS) — Inspection by measurement of workpieces and measuring equipment — Part 2: Guidance for the estimation of uncertainty in GPS measurement, in calibration of measuring equipment and in product verification
13/30286759 DC : 0 BS ISO GUIDE 82 - GUIDE FOR ADDRESSING SUSTAINABILITY IN STANDARDS
PLUS 9001 (5th ed. pub. 2017) The ISO 9000 essentials: A practical handbook for implementing the ISO 9000 family of standards
BS 5724-1.4(1997) : 1997 MEDICAL ELECTRICAL EQUIPMENT - PART 1-4: GENERAL REQUIREMENTS FOR SAFETY - COLLATERAL STANDARD - GENERAL REQUIREMENTS FOR PROGRAMMABLE ELECTRICAL MEDICAL SYSTEMS
BS EN 2043:2013 Aerospace series. Metallic materials. General requirements for semi-finished product qualification (excluding forgings and castings)
ISO/TR 27809:2007 Health informatics Measures for ensuring patient safety of health software
ISO 9004-1:1994 Quality management and quality system elements Part 1: Guidelines
DD ISO/PAS 28000:2005 Specification for security management systems for the supply chain
DIN CEN ISO/TS 13972;DIN SPEC 32987:2016-03 HEALTH INFORMATICS - DETAILED CLINICAL MODELS, CHARACTERISTICS AND PROCESSES (ISO/TS 13972:2015)
BS EN 4134:2009 Aerospace series. Bolts, normal hexagonal head, coarse tolerance normal shank, long thread, in heat resisting nickel base alloy, aluminium IVD coated. Classification: 1250 MPa (at ambient temperature)/425°C
17/30339710 DC : 0 BS ISO 21138-3 - PLASTICS PIPING SYSTEMS FOR NON-PRESSURE UNDERGROUND DRAINAGE AND SEWERAGE - STRUCTURED-WALL PIPING SYSTEMS OF UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U), POLYPROPYLENE (PP) AND POLYETHYLENE (PE) - PART 3: PIPES AND FITTINGS WITH NON-SMOOTH EXTERNAL SURFACE, TYPE B
11/30235688 DC : 0 BS EN 13240 - ROOM HEATERS FIRED BY SOLID FUEL - REQUIREMENTS AND TEST METHODS
17/30359420 DC : 0 BS ISO 10001 - QUALITY MANAGEMENT - CUSTOMER SATISFACTION - GUIDELINES FOR CODES OF CONDUCT FOR ORGANIZATIONS
16/30299984 DC : 0 BS ISO 45001 - OCCUPATIONAL HEALTH AND SAFETY MANAGEMENT SYSTEMS - REQUIREMENTS WITH GUIDANCE FOR USE
17/30362102 DC : DRAFT AUG 2017 BS ISO 21927-4 - SMOKE AND HEAT CONTROL SYSTEMS - PART 4: NATURAL SMOKE AND HEAT EXHAUST VENTILATORS; DESIGN, REQUIREMENTS AND INSTALLATION
17/30319994 DC : 0 BS ISO 20313 - SHIPS AND MARINE TECHNOLOGY - CATHODIC PROTECTION OF SHIPS
BS ISO 55000:2014 Asset management Overview, principles and terminology
15/30328784 DC : 0 BS EN 13257 - GEOTEXTILES AND GEOTEXTILE-RELATED DOCUMENTS - CHARACTERISTICS REQUIRED FOR USE IN SOLID WASTE DISPOSALS
UNE-EN 15651-5:2017 Sealants for non-structural use in joints in buildings and pedestrian walkways - Part 5: Assessment and verification of constancy of performance, marking and labelling
07/30161531 DC : 0 BS ISO 28001 - SECURITY MANAGEMENT SYSTEMS FOR THE SUPPLY CHAIN - BEST PRACTICES FOR IMPLEMENTING SUPPLY CHAIN SECURITY, ASSESSMENTS AND PLANS - REQUIREMENTS AND GUIDANCE
14/30294473 DC : 0 BS EN 488 - DISTRICT HEATING PIPES - PREINSULATED BONDED PIPE SYSTEMS FOR DIRECTLY BURIED HOT WATER NETWORKS - STEEL VALVE ASSEMBLY FOR STEEL SERVICE PIPES, POLYURETHANE THERMAL INSULATION AND OUTER CASING OF POLYETHYLENE
BS EN 12101-7:2011 Smoke and heat control systems Smoke duct sections
UNI EN 13674-4 : 2010 RAILWAY APPLICATIONS - TRACK - RAIL - PART 4: VIGNOLE RAILWAY RAILS FROM 27 KG/M TO, BUT EXCLUDING 46 KG/M
BS ISO 23933:2006 Aerospace series. Aramid reinforced lightweight polytetrafluoroethylene (PTFE) hose assemblies, classification 135°C/20 684 kPa (275°F/3 000 psi) and 135°C/21 000 kPa (275°F/3 046 psi). Procurement specification
BS EN 1090-1 : 2009 EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 1: REQUIREMENTS FOR CONFORMITY ASSESSMENT OF STRUCTURAL COMPONENTS
BS IEC 63004:2015 Standard for receiver fixture interface
SAE AS 9100D : 2016 QUALITY MANAGEMENT SYSTEMS - REQUIREMENTS FOR AVIATION, SPACE AND DEFENSE ORGANIZATIONS
BS 4778-1:1987 Quality vocabulary International terms
CSA Z24512 : 2010 ACTIVITIES RELATING TO DRINKING WATER AND WASTEWATER SERVICES - GUIDELINES FOR THE MANAGEMENT OF DRINKING WATER UTILITIES AND FOR THE ASSESSMENT OF DRINKING WATER SERVICES
08/30185727 DC : DRAFT JULY 2008 BS EN ISO 14344 - WELDING AND ALLIED PROCESSES - FLUX AND GAS SHIELDED ELECTRICAL WELDING PROCESSES - PROCUREMENT GUIDELINES FOR CONSUMABLES
12/30264438 DC : 0 BS ISO 6517 - AIR CARGO - CERTIFIED LOWER DECK CONTAINERS - DESIGN AND TESTING
12/30259073 DC : 0 BS EN 764-5 - PRESSURE EQUIPMENT - PART 5: INSPECTION DOCUMENTATION OF METALLIC MATERIALS AND COMPLIANCE WITH THE MATERIAL SPECIFICATION
05/30117311 DC : 0 EN 54-25 - FIRE DETECTION AND FIRE ALARM SYSTEMS - PART 25: COMPONENTS USING RADIO LINKS AND SYSTEM REQUIREMENTS
BS EN 10223-8:2013 Steel wire and wire products for fencing and netting Welded mesh gabion products
BS EN 15681-2:2017 Glass in Building. Basic alumino silicate glass products Product standard
15/30323537 DC : 0 BS EN 16887 - LEATHER - ENVIRONMENTAL FOOTPRINT - PRODUCT CATEGORY RULES (PCR) - CARBON FOOTPRINTS
BS ISO/IEC/IEEE 29119-2:2013 Software and systems engineering. Software testing Test processes
02/202973 DC : 0 IEC 60832-2. ED.2 - LIVE WORKING - INSULATING STICKS AND ATTACHABLE UNIVERSAL DEVICES (FITTINGS) - PART 2: ATTACHABLE UNIVERSAL DEVICES (FITTINGS)
BS ISO 14885:2014 Large yachts. Diesel engines for main propulsion and essential auxiliaries. Safety requirements
16/30346829 DC : 0 BS ISO 16038 - MALE CONDOMS - GUIDANCE ON THE USE OF ISO 4074 AND ISO 23409 IN THE QUALITY MANAGEMENT CONDOMS
API 9A : 2011 : INC : ERR 1 : 2012 : R2016 SPECIFICATION FOR WIRE ROPE
PD CEN/TR 15545:2006 Guide to the use of EN 545
08/30184642 DC : 0 BS EN 1463-1 - ROAD MARKING MATERIALS - RETROREFLECTING ROAD STUDS - PART 1: INITIAL PERFORMANCE REQUIREMENTS
DEFSTAN 00-54(PT1)/1(1999) : 1999 REQUIREMENTS FOR SAFETY RELATED ELECTRONIC HARDWARE IN DEFENCE EQUIPMENT - PART 1: REQUIREMENTS
BS EN 61131-6:2012 Programmable controllers Functional safety
10/30232007 DC : 0 BS EN ISO 28765 - VITREOUS AND PORCELAIN ENAMELS - DESIGN OF BOLTED STEEL TANKS FOR THE STORAGE OR TREATMENT OF WATER OR MUNICIPAL OR INDUSTRIAL EFFLUENTS AND SLUDGES
I.S. EN 11140-4:2007 STERILIZATION OF HEALTH CARE PRODUCTS - CHEMICAL INDICATORS - PART 4: CLASS 2 INDICATORS AS AN ALTERNATIVE TO THE BOWIE AND DICK-TYPE TEST FOR DETECTION OF STEAM PENETRATION
16/30338123 DC : 0 BS EN 16993 - GEOSYNTHETIC BARRIERS - CHARACTERISTICS REQUIRED FOR USE IN THE CONSTRUCTION OF STORAGE LAGOONS, SECONDARY CONTAINMENT (ABOVE AND BELOW GROUND) AND OTHER CONTAINMENT APPLICATIONS FOR CHEMICALS, POLLUTED WATER AND PRODUCED LIQUIDS
15/30282559 DC : 0 BS EN ISO 11137-3 - STERILIZATION OF HEALTH CARE PRODUCTS - RADIATION - PART 3: GUIDANCE ON DOSIMETRIC ASPECTS OF DEVELOPMENT, VALIDATION AND ROUTINE CONTROL
UNE-EN 1457-2:2013 Chimneys - Clay/ceramic flue liners - Part 2: Flue liners operating under wet conditions - Requirements and test methods
BS ISO/IEC 15944-9:2015 Information technology. Business Operational View Business transaction traceability framework for commitment exchange
BS ISO 18797-1 : 2016 COR 2017 PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - EXTERNAL CORROSION PROTECTION OF RISERS BY COATINGS AND LININGS - PART 1: ELASTOMERIC COATING SYSTEMSPOLYCHLOROPRENE OR EPDM
13/30271254 DC : 0 BS ISO 11077 - AEROSPACE - SELF-PROPELLED DE-ICING/ANTI-ICING VEHICLES - FUNCTIONAL REQUIREMENTS
PREN 14296 : DRAFT 2014 SANITARY APPLIANCES - COMMUNAL WASHING TROUGHS
99/124125 DC : DRAFT NOV 1999 BS EN ISO 15883-1 - WASHER-DISINFECTORS - PART 1: GENERAL REQUIREMENTS, DEFINITIONS AND TESTS
13/30277457 DC : 0 BS EN 1776 - GAS INFRASTRUCTURE - GAS MEASURING SYSTEMS - FUNCTIONAL REQUIREMENTS
UNI EN 14846 : 2008 BUILDING HARDWARE - LOCKS AND LATCHES - ELECTROMECHANICALLY OPERATED LOCKS AND STRIKING PLATES - REQUIREMENTS AND TEST METHODS
BS EN 13674-2 : 2006 RAILWAY APPLICATIONS - TRACK - RAIL - PART 2: SWITCH AND CROSSING RAILS USED IN CONJUNCTION WITH VIGNOLE RAILWAY RAILS 46 KG/M AND ABOVE
14/30297267 DC : 0 BS ISO/IEC/IEEE 15288 - SYSTEMS AND SOFTWARE ENGINEERING - SYSTEM LIFE CYCLE PROCESSES
PREN 14535-2 : DRAFT 2016 RAILWAY APPLICATIONS - BRAKE DISCS FOR RAILWAY ROLLING STOCK - PART 2: BRAKE DISCS MOUNTED ONTO THE WHEEL, DIMENSIONS AND QUALITY REQUIREMENTS
EN 15129:2018 (edition 2) Anti-seismic devices
UNE-EN 14535-2:2012 Railway applications - Brake discs for railway rolling stock - Part 2: Brake discs mounted onto the wheel, dimensions and quality requirements
BS EN 61189-5-3:2015 Test methods for electrical materials, printed boards and other interconnection structures and assemblies General test methods for materials and assemblies. Soldering paste for printed board assemblies
04/30103167 DC : DRAFT MARCH 2004 BS EN 12094-6 - FIXED FIREFIGHTING SYSTEMS - COMPONENTS FOR GAS EXTINGUISHING SYSTEMS - PART 6 - REQUIREMENTS AND TEST METHODS FOR NON-ELECTRICAL DISABLE DEVICES FOR CO2 SYSTEMS
I.S. EN ISO 3834-1:2006 QUALITY REQUIREMENTS FOR FUSION WELDING OF METALLIC MATERIALS - PART 1: CRITERIA FOR THE SELECTION OF THE APPROPRIATE LEVEL OF QUALITY REQUIREMENTS
ANSI CGATS/ISO 15790 : 2005(R2007) GRAPHIC TECHNOLOGY AND PHOTOGRAPHY - CERTIFIED REFERENCE MATERIALS FOR REFLECTION AND TRANSMISSION METROLOGY - DOCUMENTATION AND PROCEDURES FOR USE, INCLUDING DETERMINATION OF COMBINED STANDARD UNCERTAINTY
NFPA 1936 : 2015 POWERED RESCUE TOOLS
11/30240275 DC : 0 BS EN 54-22 - FIRE DETECTION AND FIRE ALARM SYSTEM - PART 22: RESETTABLE LINE TYPE HEAT DETECTORS
17/30293100 DC : 0 BS ISO 19882 - GASEOUS HYDROGEN - THERMALLY ACTIVATED PRESSURE RELIEF DEVICES FOR COMPRESSED HYDROGEN VEHICLE FUEL CONTAINERS
PD ISO/TR 14062:2002 Environmental management. Integrating environmental aspects into product design and development
17/30347919 DC : 0 BS ISO 10005 - QUALITY MANAGEMENT SYSTEMS - GUIDELINES FOR QUALITY PLANS
BS EN 50483-1:2009 Test requirements for low voltage aerial bundled cable accessories Generalities
BS ISO 4642-1:2015 Rubber and plastics hoses, non-collapsible, for fire-fighting service Semi-rigid hoses for fixed systems
BS ISO/IEC 25010:2011 Systems and software engineering. Systems and software quality requirements and evaluation (SQuaRE). System and software quality models
PD CEN/TS 1401-2:2012 Plastics piping systems for non-pressure underground drainage and sewerage. Unplasticized poly(vinyl chloride) (PVC-U) Guidance for assessment of conformity
BS ISO 21927-10:2011 Smoke and heat control systems Specification for power output devices
BS EN 10088-5:2009 Stainless steels Technical delivery conditions for bars, rods, wire, sections and bright products of corrosion resisting steels for construction purposes
17/30354892 DC : 0 BS ISO 10290 - TEXTILES - COTTON YARNS - BASIS FOR SPECIFICATION
15/30328790 DC : 0 BS EN 13249 - GEOTEXTILES AND GEOTEXTILE-RELATED PRODUCTS - CHARACTERISTICS REQUIRED FOR USE IN THE CONSTRUCTION OF ROADS AND OTHER TRAFFICKED AREAS (EXCLUDING RAILWAYS AND ASPHALT INCLUSION)
04/30055611 DC : 0 BS EN 124 - GULLY TOPS AND MANHOLE TOPS FOR VEHICULAR AND PEDESTRIAN AREAS
UNE-EN 15048-1:2018 Non-preloaded structural bolting assemblies - Part 1: General requirements
UNI EN 15644 : 2009 TRADITIONALLY DESIGNED PREFABRICATED STAIRS MADE OF SOLID WOOD - SPECIFICATIONS AND REQUIREMENTS
PREN 14382 : DRAFT 2016 GAS SAFETY SHUT-OFF DEVICES FOR INLET PRESSURE UP TO 100 BAR
UNI EN ISO 13628-15 : 2011 PETROLEUM AND NATURAL GAS INDUSTRIES - DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - PART 15: SUBSEA STRUCTURES AND MANIFOLDS
UNI EN 15283-2 : 2009 GYPSUM BOARDS WITH FIBROUS REINFORCEMENT - DEFINITIONS, REQUIREMENTS AND TEST METHODS - PART 2: GYPSUM FIBRE BOARDS
PD CEN/TS 13598-3:2012 Plastics piping systems for non-pressure underground drainage and sewerage. Unplasticized poly(vinyl chloride)(PVC-U), polypropylene (PP) and polyethylene (PE) Guidance for assessment of conformity
DIN EN 14229:2011-02 Structural timber - Wood poles for overhead lines
10/30216684 DC : 0 BS EN 45545-1 - RAILWAY APPLICATIONS - FIRE PROTECTION ON RAILWAY VEHICLES - PART 1: GENERAL
03/319521 DC : DRAFT NOV 2003 ISO/IEC 17040 - GENERAL REQUIREMENTS FOR PEER ASSESSMENT OF CONFORMITY AS