• There are no items in your cart
We noticed you’re not on the correct regional site. Switch to our AMERICAS site for the best experience.
Dismiss alert

MIL F 9490 : D

Superseded
Superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

View Superseded by
superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

FLIGHT CONTROL SYSTEMS - DESIGN, INSTALLATION AND TEST OF PILOTED AIRCRAFT, GENERAL SPECIFICATION FOR
Available format(s)

PDF

Superseded date

22-04-2008

Specifies flight control systems which include all components to transmit flight control commands, from the pilot or other sources to appropriate force and moment producers.

Committee
FSC 15GP
DevelopmentNote
D NOTICE 1 - Notice of Validation. D NOTICE 2 - Notice of Administrative Change. (09/2007)
DocumentType
Standard
Pages
99
PublisherName
US Military Specs/Standards/Handbooks
Status
Superseded
SupersededBy

SAE ARP 1281 : 2002 ACTUATORS: AIRCRAFT FLIGHT CONTROLS, POWER OPERATED, HYDRAULIC, GENERAL SPECIFICATION FOR
DEFSTAN 00-970(PT1)SEC3/11(2013) : 2013 DESIGN AND AIRWORTHINESS REQUIREMENTS FOR SERVICE AIRCRAFT - PART 1: FIXED WING - SECTION 3: STRUCTURE
DEFSTAN 00-970(PT0)/9(2012) : 2012 DESIGN AND AIRWORTHINESS REQUIREMENTS FOR SERVICE AIRCRAFT - PART 0: PROCEDURES FOR USE, CONTENT AND DEFINITIONS
DEFSTAN 00-970(PT0)/7(2011) : 2011 DESIGN AND AIRWORTHINESS REQUIREMENTS FOR SERVICE AIRCRAFT - PART 0: PROCEDURES FOR USE, CONTENT AND DEFINITIONS
DEFSTAN 00-970(PT0)/14(2014) : 2014 DESIGN AND AIRWORTHINESS REQUIREMENTS FOR SERVICE AIRCRAFT - PART 0: PROCEDURES FOR USE, CONTENT AND DEFINITIONS
DEFSTAN 00-970(PT0)/11(2013) : 2013 DESIGN AND AIRWORTHINESS REQUIREMENTS FOR SERVICE AIRCRAFT - PART 0: PROCEDURES FOR USE, CONTENT AND DEFINITIONS
DEFSTAN 00-970(PT0)/12(2014) : 2014 DESIGN AND AIRWORTHINESS REQUIREMENTS FOR SERVICE AIRCRAFT - PART 0: PROCEDURES FOR USE, CONTENT AND DEFINITIONS
DEFSTAN 00-970(PT0)/13(2014) : 2014 DESIGN AND AIRWORTHINESS REQUIREMENTS FOR SERVICE AIRCRAFT - PART 0: PROCEDURES FOR USE, CONTENT AND DEFINITIONS
DEFSTAN 00-970(PT0)/8(2011) : 2011 DESIGN AND AIRWORTHINESS REQUIREMENTS FOR SERVICE AIRCRAFT - PART 0: PROCEDURES FOR USE, CONTENT AND DEFINITIONS
DEFSTAN 00-970(PT0)/10(2013) : 2013 DESIGN AND AIRWORTHINESS REQUIREMENTS FOR SERVICE AIRCRAFT - PART 0: PROCEDURES FOR USE, CONTENT AND DEFINITIONS
MIL-H-8891 Revision A:1978 HYDRAULIC SYSTEMS, MANNED FLIGHT VEHICLES TYPE 111 DESIGN, INSTALLATION AND DATA REQUIREMENTS FOR, GENERAL SPECIFICATION FOR
MIL-H-5440 Revision H:1993 HYDRAULIC SYSTEMS, AIRCRAFT, TYPES 1 AND 11 DESIGN AND INSTALLATION REQUIREMENTS FOR
DEFSTAN 00-970(PT1)SEC3/6(2010) : 2010 DESIGN AND AIRWORTHINESS REQUIREMENTS FOR SERVICE AIRCRAFT - PART 1: FIXED WING - SECTION 3: STRUCTURE
DEFSTAN 00-970(PT1)SEC3/4(2006) : 2006 DESIGN AND AIRWORTHINESS REQUIREMENTS FOR SERVICE AIRCRAFT - PART 1: COMBAT A/C - SECTION 3 - STRUCTURE
MIL A 87221 : 0 AIRCRAFT STRUCTURES, GENERAL SPECIFICATION FOR REQUEST FOR ISSUE OTHER THAN DOD MUST BE SENT VIA; ASD/ENES, WRIGHT-PATTERSON AFB OH 45433-6503
JSSG-2001 Revision B:2004 Air Vehicle
DEFSTAN 00-970(PT1)SEC3/9(2012) : 2012 DESIGN AND AIRWORTHINESS REQUIREMENTS FOR SERVICE AIRCRAFT - PART 1: FIXED WING - SECTION 3 - STRUCTURE
DEFSTAN 00-970(PT1)SEC3/7(2011) : 2011 DESIGN AND AIRWORTHINESS REQUIREMENTS FOR SERVICE AIRCRAFT - PART 1: FIXED WING - SECTION 3: STRUCTURE
DEFSTAN 00-970(PT1)SEC3/10(2013) : 2013 DESIGN AND AIRWORTHINESS REQUIREMENTS FOR SERVICE AIRCRAFT - PART 1: FIXED WING - SECTION 3: STRUCTURE
JSSG-2006 Base Document:1998 JOINT SERVICE SPECIFICATION GUIDE - AIRCRAFT STRUCTURES
DEFSTAN 00-970(PT1)SEC3/5(2007) : 2007 DESIGN AND AIRWORTHINESS REQUIREMENTS FOR SERVICE AIRCRAFT - PART 1: COMBAT AIRCRAFT - SECTION 3: STRUCTURE
DEFSTAN 00-970(PT1)SEC3/8(2011) : 2011 DESIGN AND AIRWORTHINESS REQUIREMENTS FOR SERVICE AIRCRAFT - PART 1: FIXED WING - SECTION 3 - STRUCTURE
SAE AIR 4982 : 2014 AEROSPACE FLY-BY-LIGHT ACTUATION SYSTEMS
MIL-D-8708 Revision C:1991 DEMONSTRATION REQUIREMENTS FOR AIRPLANES
MIL-F-8785 Revision C:1980 FLYING QUALITIES OF PILOTED AIRPLANES

MIL-T-5522 Revision D:1975 TEST REQUIREMENTS AND METHODS FOR AIRCRAFT HYDRAULIC AND EMERGENCY PNEUMATIC SYSTEMS
MIL-A-8865 Revision B:1987 AIRPLANE STRENGTH AND RIGIDITY MISCELLANEOUS LOADS
MIL HDBK 5 : G_VOL2 METALLIC MATERIALS AND ELEMENTS FOR AEROSPACE VEHICLE STRUCTURES
MS33540 Revision J:1986 SAFETY WIRING AND COTTER PINNING, GENERAL PRACTICES FOR
MIL-I-8500 Revision D:1980 INTERCHANGEABILITY AND REPLACEABILITY OF COMPONENT PARTS FOR AEROSPACE VEHICLES
MIL-STD-1530 Revision D:2016 AIRCRAFT STRUCTURAL INTEGRITY PROGRAM (ASIP)
MIL A 8892 : 0 AIRPLANE STRENGTH AND RIGIDITY, VIBRATION
MIL G 25561 : B GRIP ASSEMBLY, CONTROLLER, AIRCRAFT, TYPE MC AND 2
MIL-F-8785 Revision C:1980 FLYING QUALITIES OF PILOTED AIRPLANES
MS33736 Revision D:2002 TURNBUCKLE ASSEMBLIES, CLIP LOCKING OF
MIL-STD-704 Revision F:2004 AIRCRAFT ELECTRIC POWER CHARACTERISTICS
MIL-STD-130 Revision N:2007 IDENTIFICATION MARKING OF U.S. MILITARY PROPERTY
MIL-H-8890 Base Document:1961 HYDRAULIC COMPONENTS, TYPE 111 [65 DEGREES TO PLUS 450 DEGREES F] GENERAL SPECIFICATION FOR [ASG]
MIL A 8893 : 0 AIRPLANE STRENGTH AND RIGIDITY, SONIC FATIGUE
SAE ARP 1281 : 2002 ACTUATORS: AIRCRAFT FLIGHT CONTROLS, POWER OPERATED, HYDRAULIC, GENERAL SPECIFICATION FOR
MIL-M-7997 Revision C:1981 MOTOR, AIRCRAFT HYDRAULIC, CONSTANT DISPLACEMENT GENERAL SPECIFICATION FOR
MIL-STD-810 Revision G:2008 ENVIRONMENTAL ENGINEERING CONSIDERATIONS AND LABORATORY TESTS
MIL-H-8891 Revision A:1978 HYDRAULIC SYSTEMS, MANNED FLIGHT VEHICLES TYPE 111 DESIGN, INSTALLATION AND DATA REQUIREMENTS FOR, GENERAL SPECIFICATION FOR
MIL G 6641 : B NOTICE 1 GEARBOX, AIRCRAFT ACCESSORY DRIVE, GENERAL SPECIFICATION FOR [ASG]
MIL-STD-480 Revision B:1988 CONFIGURATION CONTROL - ENGINEERING CHANGES, DEVIATIONS AND WAIVERS
MIL-A-22771 Revision D:1984 ALUMINUM ALLOY FORGINGS, HEAT TREATED
MIL-E-6051 Revision D:1967 ELECTROMAGNETIC COMPATIBILITY REQUIREMENTS, SYSTEM
MIL-A-8870 Revision C:1993 AIRPLANE STRENGTH AND RIGIDITY VIBRATION, FLUTTER, AND DIVERGENCE
MIL T 5677 : B THIMBLE, WIRE CABLE, AIRCRAFT
MIL T 6117 : D TERMINAL, CABLE ASSEMBLIES, SWAGED TYPE
MIL-M-38510 Revision J:1991 MICROCIRCUITS, SPECIFICATION FOR
MIL P 7034 : D PULLEY, GROOVE, ANTIFRICTION BEARING, GREASE LUBRICATED, AIRCRAFT
MIL E 5400 : T ELECTRONIC EQUIPMENT, AEROSPACE, GENERAL SPECIFICATION FOR
MIL-B-7949 Revision E:1981 BEARING, BALL, AIRFRAME, ANTIFRICTION
MIL-F-7190 Revision B:1985 FORGING, STEEL, FOR AIRCRAFT AND AEROSPACE EQUIPMENT AND SPECIAL ORDNANCE APPLICATIONS
MIL-STD-838 Revision C:1983 LUBRICATION OF MILITARY EQUIPMENT
MIL C 27500 : G CABLE, POWER, ELECTRICAL & CABLE SPECIAL PURPOSE, ELECTRICAL SHIELDED & UNSHIELDED
MIL C 18375 : A CABLE, STEEL (CORROSION RESISTING, NON MAGNETIC) FLEXIBLE, PREFORMED (FOR AERONAUTICAL USE) (ASG)
MS33588 Revision E:1984 NUTS, SELF LOCKING, AIRCRAFT, RELIABILITY AND MAINTAINABILITY USAGE REQUIREMENTS FOR
MIL W 83420 : E WIRE, ROPE, FLEXIBLE, FOR AIRCRAFT CONTROL
MIL-B-81820 Revision F:1994 BEARINGS, PLAIN, SELF-ALIGNING, SELF-LUBRICATING, LOW SPEED OSCILLATION, GENERAL SPECIFICATION FOR
MS24665 Revision F:1986 PIN, COTTER (SPLIT)
MIL-STD-143 Revision B:1969 STANDARDS, AND SPECIFICATIONS ORDER OF PRECEDENCE FOR THE SELECTION OF
MIL-U-3963 Revision A:1958 UNIVERSAL JOINT, ANTIFRICTION BEARINGS
MIL I 7064 : LATEST INDICATOR, POSITION, ELEVATOR TRIM TAB
MS33572 Revision C:1968 INSTRUMENT, PILOT, FLIGHT, BASIC, STANDARD ARRANGEMENT FOR HELICOPTERS
MIL-M-8609 Revision B:1965 MOTOR, DC 28 VOLT SYSTEM AIRCRAFT, GENERAL SPECIFICATION FOR
MIL-STD-461 Revision G:2015 REQUIREMENTS FOR THE CONTROL OF ELECTROMAGNETIC INTERFERENCE CHARACTERISTICS OF SUBSYSTEMS AND EQUIPMENT
MIL-B-8976 Base Document:1969 BEARINGS, PLAIN, SELF-ALIGNING, ALL METAL
MIL-S-8879 Revision C:1991 SCREW THREADS, CONTROLLED RADIUS ROOT WITH INCREASED MINOR DIAMETER, GENERAL SPECIFICATION FOR
MIL-H-8775 Revision D:1976 HYDRAULIC SYSTEM COMPONENTS, AIRCRAFT AND MISSILES GENERAL SPECIFICATION FOR
MIL-A-8867 Revision C:1987 AIRPLANE STRENGTH AND RIGIDITY GROUND TESTS
MIL-S-5676 Revision A:1950 SPLICING, CABLE TERMINAL, PROCESS FOR AIRCRAFT
MIL-A-21180 Revision D:1984 ALUMINUM-ALLOY CASTINGS, HIGH STRENGTH
MIL-A-8861 Revision B:1986 AIRPLANE STRENGTH AND RIGIDITY FLIGHT LOADS
MIL-B-6039 Revision E:1994 BEARING, DOUBLE ROW, BALL, SEALED ROD END, ANTI FRICTION, SELF ALIGNING
MIL-STD-250 Revision D:1974 AIRCREW STATION CONTROLS AND DISPLAYS FOR ROTARY WING AIRCRAFT
MIL-A-8866 Revision C:1987 AIRPLANE STRENGTH AND RIGIDITY RELIABILITY REQUIREMENTS, REPEATED LOADS, FATIGUE AND DAMAGE TOLERANCE
SAE ARP 988 : 2016 ELECTROHYDRAULIC MECHANICAL FEEDBACK SERVOACTUATORS
MIL-M-7969 Revision C:1965 Motors, Alternating Current, 400-Cycle, 115/200-Volt System, Aircraft, General Specification for
MIL-STD-1472 Revision G:2012 HUMAN ENGINEERING
MIL S 9419 : E SWITCH, TOGGLE, MOMENTARY, FOUR-POSITION ON, CENTER OFF, GENERAL SPECIFICATION FOR
MIL T 8878 : D TURNBUCKLE, POSITIVE SAFETYING
MIL-H-5440 Revision H:1993 HYDRAULIC SYSTEMS, AIRCRAFT, TYPES 1 AND 11 DESIGN AND INSTALLATION REQUIREMENTS FOR
MIL D 7602 : A NOTICE 1 DRIVE, TURBINE, AIR AIRCRAFT ACCESSORY, GENERAL SPECIFICATION FOR
MIL T 781 : D TERMINAL, WIRE ROPE, SWAGING
MIL STD 421 : LATEST
MIL C 7958 : A CONTROL, PUSH PULL, FLEXIBLE AND RIGID
MIL-B-6038 Revision A:1961 BEARING, BALL BELLCRANK, ANTI FRICTION, AIRFRAME
MIL J 6193 : C JOINT, UNIVERSAL, PLAIN, LIGHT AND HEAVY DUTY
MIL-P-8564 Revision D:1970 PNEUMATIC SYSTEM COMPONENTS, AERONAUTICAL, GENERAL SPECIFICATION FOR [ASG]
NAS 516:2015 FITTING, LUBRICATION, .1250 INCH DRIVE, FLUSH TYPE
MIL-B-5087 Revision B:1964 BONDING, ELECTRICAL AND LIGHTING PROTECTION, FOR AEROSPACE SYSTEMS
MIL-W-5088 Revision L:1991 Wiring, Aerospace Vehicle (Future Design Should Refer to SAE-AS50881)
MIL-S-8698 Base Document:1954 STRUCTURAL DESIGN REQUIREMENTS, HELICOPTERS [ASG]
MIL C 6021 : H NOTICE 1 CASTINGS, CLASSIFICATION AND INSPECTION OF
MS15981 Revision D:1967 FASTENER, EXTERNALLY THREADED, SELF LOCKING DESIGN AND USAGE LIMITATIONS FOR
MIL-F-3541 Revision C:1989 FITTING, LUBRICATION, GENERAL SPECIFICATION FOR
MIL-E-7080 Revision B:1962 ELECTRIC EQUIPMENT, AIRCRAFT, SELECTION AND INSTALLATION OF
MIL-F-83142 Revision A:1969 FORGING, TITANIUM ALLOYS, PREMIUM QUALITY
MIL A 83444 : 0 AIRPLANE DAMAGE TOLERANCE REQUIREMENTS
MS33602 Base Document:1967 BOLT, SELF RETAINING AIRCRAFT RELIABILITY AND MAINTAINABILITY DESIGN AND USAGE REQUIREMENTS FOR
MIL-A-8860 Revision B:1987 AIRPLANE STRENGTH AND RIGIDITY GENERAL SPECIFICATION FOR
MIL-STD-1553 Revision B:1978 DIGITAL TIME DIVISION COMMAND/RESPONSE MULTIPLEX DATA

View more information
$32.74
Including GST where applicable

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.

Need help?
Call us on 131 242, then click here to start a Screen Sharing session
so we can help right away! Learn more