Customer Support: 131 242

  • There are no items in your cart
We noticed you’re not on the correct regional site. Switch to our AMERICAS site for the best experience.
Dismiss alert

NACE RP 01 76 : 2003

Superseded

Superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

View Superseded by
superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

CORROSION CONTROL OF STEEL FIXED OFFSHORE STRUCTURES ASSOCIATED WITH PETROLEUM PRODUCTION

Available format(s)

Hardcopy , PDF

Superseded date

10-03-2007

Language(s)

English

Published date

01-01-2003

1. General
2. Definitions
3. Structural Design for Corrosion Control
4. Criteria for Cathodic Protection
5. Design of Cathodic Protection Systems
6. Installation of Cathodic Protection Systems
7. Control of Interference Currents
8. Dielectric Shields
9. Operation and Maintenance of Cathodic Protection Systems
10. Splash Zone Corrosion Control Measures
11. Maintenance of Splash Zone Corrosion Control Measures
12. Surface Preparation
13. Coatings
14. Coatings Inspection
15. Corrosion Control Records
References
Bibliography
Appendix A - Typical Design Parameters for Offshore Petroleum
             Production
Appendix B - Energy Capabilities and Consumption Rates of
             Various Commercial Galvanic Anodes Available for
             Cathodic Protection of Offshore Structures
Appendix C - Consumption Rates in Seawater of Various
             Commercial Types of Impressed Current Anodes
             Available for Cathodic Protection of Offshore
             Structures
Appendix D - Typical Method for Calculation of Galvanic Anode
             Current Output Using Initial, Maintenance, and
             Final Current Densities
Appendix E - Typical Method of Calculation of Galvanic Anode
             Current Output Using Design Slope and Maintenance
             Current Density
Tables
Figures

Provides guidelines for establishing minimum requirements for the control of corrosion on steel fixed offshore structures associated with petroleum production, and on the external portions of associated oil and gas handling equipment.

Committee
STG 30
DevelopmentNote
Redesignated as NACE SP 01 76. (05/2007)
DocumentType
Standard
Pages
44
PublisherName
National Association of Corrosion Engineers
Status
Superseded
SupersededBy

BS EN 61400-3:2009 Wind turbines Design requirements for offshore wind turbines
API 2FPS : 2011 PLANNING, DESIGNING, AND CONSTRUCTING FLOATING PRODUCTION SYSTEMS
07/30159562 DC : 0 BS EN ISO 13628-1 AMD1 - PETROLEUM AND NATURAL GAS INDUSTRIES - DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - PART 1: GENERAL REQUIREMENTS AND RECOMMENDATIONS
API 14E : 1991 : R2013 RECOMMENDED PRACTICE FOR DESIGN AND INSTALLATION OF OFFSHORE PRODUCTION PLATFORM PIPING SYSTEMS
06/30125909 DC : DRAFT OCT 2006 ISO 13628-4 - PETROLEUM AND NATURAL GAS INDUSTRIES - DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - PART 4: SUBSEA WELLHEAD AND TREE EQUIPMENT
API 17P : 2013 DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - SUBSEA STRUCTURES AND MANIFOLDS
BS ISO 18647:2017 Petroleum and natural gas industries. Modular drilling rigs for offshore fixed platforms
DIN EN 12496:2014-02 GALVANIC ANODES FOR CATHODIC PROTECTION IN SEAWATER AND SALINE MUD
CSA C61400-3 : 2011 : R2016 WIND TURBINES - PART 3: DESIGN REQUIREMENTS FOR OFFSHORE WIND TURBINES
I.S. EN ISO 13628-15:2011 PETROLEUM AND NATURAL GAS INDUSTRIES - DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - PART 15: SUBSEA STRUCTURES AND MANIFOLDS (ISO 13628-15:2011)
BS EN ISO 13628-1 : 2005 PETROLEUM AND NATURAL GAS INDUSTRIES - DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - PART 1: GENERAL REQUIREMENTS AND RECOMMENDATIONS
BS EN ISO 19902 : 2007 PETROLEUM AND NATURAL GAS INDUSTRIES - FIXED STEEL OFFSHORE STRUCTURES
EN 12496:2013 Galvanic anodes for cathodic protection in seawater and saline mud
EN 61400-3:2009 Wind turbines - Part 3: Design requirements for offshore wind turbines
API 16D : 2004 : R2013 SPECIFICATION FOR CONTROL SYSTEMS FOR DRILLING WELL CONTROL EQUIPMENT AND CONTROL SYSTEMS FOR DIVERTER EQUIPMENT
UNI EN ISO 13628-15 : 2011 PETROLEUM AND NATURAL GAS INDUSTRIES - DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - PART 15: SUBSEA STRUCTURES AND MANIFOLDS
API 14E CHINESE : 2007 RECOMMENDED PRACTICE FOR DESIGN AND INSTALLATION OF OFFSHORE PRODUCTION PLATFORM PIPING SYSTEMS
BS EN ISO 13628-15:2011 Petroleum and natural gas industries. Design and operation of subsea production systems Subsea structures and manifolds
CSA ISO 19904-1 : 2007 : R2017 PETROLEUM AND NATURAL GAS INDUSTRIES - FLOATING OFFSHORE STRUCTURES - PART 1: MONOHULLS, SEMI-SUBMERSIBLES AND SPARS
I.S. EN ISO 19902:2007 PETROLEUM AND NATURAL GAS INDUSTRIES - FIXED STEEL OFFSHORE STRUCTURES
I.S. EN ISO 13628-1:2006 PETROLEUM AND NATURAL GAS INDUSTRIES - DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - PART 1: GENERAL REQUIREMENTS AND RECOMMENDATIONS
NACE SP 01 08 : 2008 CORROSION CONTROL OF OFFSHORE STRUCTURES BY PROTECTIVE COATINGS
EN ISO 19902:2007/A1:2013 PETROLEUM AND NATURAL GAS INDUSTRIES - FIXED STEEL OFFSHORE STRUCTURES (ISO 19902:2007/AMD 1:2013)
09/30172965 DC : 0 BS EN ISO 13628-15 - PETROLEUM AND NATURAL GAS INDUSTRIES - DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - PART 15: SUBSEA STRUCTURES AND MANIFOLDS
10/30234726 DC : 0 BS EN 12496 - GALVANIC ANODES FOR CATHODIC PROTECTION IN SEAWATER AND SALINE MUD
11/30253360 DC : 0 BS EN ISO 13628-14 - PETROLEUM AND NATURAL GAS INDUSTRIES - DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - PART 14: SUBSEA HIGH INTEGRITY PRESSURE PROTECTION SYSTEMS (HIPPS)
API 14F : 2008 : R2013 DESIGN, INSTALLATION, AND MAINTENANCE OF ELECTRICAL SYSTEMS FOR FIXED AND FLOATING OFFSHORE PETROLEUM FACILITIES FOR UNCLASSIFIED AND CLASS 1, DIVISION 1 AND DIVISION 2 LOCATIONS
API 540 : 1999 : R2006 ELECTRICAL INSTALLATIONS IN PETROLEUM PROCESSING PLANTS
ISO 13628-4:2010 Petroleum and natural gas industries — Design and operation of subsea production systems — Part 4: Subsea wellhead and tree equipment
UNI EN 12496 : 2013 GALVANIC ANODES FOR CATHODIC PROTECTION IN SEAWATER AND SALINE MUD
03/314812 DC : DRAFT SEP 2003 ISO 13628-1 - PETROLEUM AND NATURAL GAS INDUSTRIES - DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - PART 1: GENERAL REQUIREMENTS AND RECOMMENDATIONS
ISO 19904-1:2006 Petroleum and natural gas industries Floating offshore structures Part 1: Monohulls, semi-submersibles and spars
NACE RP 06 75 : 1988 CORROSION CONTROL OF OFFSHORE STEEL PIPELINES
API 16D RUSSIAN : 2004 SPECIFICATION FOR CONTROL SYSTEMS FOR DRILLING WELL CONTROL EQUIPMENT AND CONTROL SYSTEMS FOR DIVERTER EQUIPMENT
BS EN 12496:2013 Galvanic anodes for cathodic protection in seawater and saline mud
15/30303554 DC : 0 BS ISO 18647 - SPECIFICATIONS FOR OFFSHORE MODULAR DRILLING RIGS ON FIXED PLATFORMS
API 2A LRFD : 1993 RECOMMENDED PRACTICE FOR PLANNING, DESIGNING AND CONSTRUCTING FIXED OFFSHORE PLATFORMS - LOAD AND RESISTANCE FACTOR DESIGN
API RP 14E : 1991 RECOMMENDED PRACTICE FOR DESIGN AND INSTALLATION OF OFFSHORE PRODUCTION PLATFORM PIPING SYSTEMS
API 17O : 2014 SUBSEA HIGH INTEGRITY PRESSURE PROTECTION SYSTEMS (HIPPS)
API 17D REDLINE : 2011 DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - SUBSEA WELLHEAD AND TREE EQUIPMENT
EEMUA 194 : 2012 GUIDELINES FOR MATERIALS SELECTION AND CORROSION CONTROL FOR SUBSEA OIL AND GAS PRODUCTION EQUIPMENT
ISO 18647:2017 Petroleum and natural gas industries — Modular drilling rigs for offshore fixed platforms
API 14F:2008 DESIGN, INSTALLATION, AND MAINTENANCE OF ELECTRICAL SYSTEMS FOR FIXED AND FLOATING OFFSHORE PETROLEUM FACILITIES FOR UNCLASSIFIED AND CLASS 1, DIVISION 1 AND DIVISION 2 LOCATIONS
API 540:1999 ELECTRICAL INSTALLATIONS IN PETROLEUM PROCESSING PLANTS
EN ISO 13628-1:2005/A1:2010 PETROLEUM AND NATURAL GAS INDUSTRIES - DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - PART 1: GENERAL REQUIREMENTS AND RECOMMENDATIONS
EN ISO 13628-4:2010/AC:2011 PETROLEUM AND NATURAL GAS INDUSTRIES - DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - PART 4: SUBSEA WELLHEAD AND TREE EQUIPMENT
ISO 13628-1:2005 Petroleum and natural gas industries — Design and operation of subsea production systems — Part 1: General requirements and recommendations
BS EN ISO 13703 : 2001 PETROLEUM AND NATURAL GAS INDUSTRIES - DESIGN AND INSTALLATION OF PIPING SYSTEMS ON OFFSHORE PRODUCTION PLATFORMS
UNE-EN 12496:2013 Galvanic anodes for cathodic protection in seawater and saline mud
ISO 13703:2000 Petroleum and natural gas industries Design and installation of piping systems on offshore production platforms
ISO 19902:2007 Petroleum and natural gas industries Fixed steel offshore structures
IEC 61400-3:2009 Wind turbines - Part 3: Design requirements for offshore wind turbines
BS EN ISO 19904-1:2006 Petroleum and natural gas industries. Floating offshore structures Monohulls, semi-submersibles and spars
ISO 13628-15:2011 Petroleum and natural gas industries — Design and operation of subsea production systems — Part 15: Subsea structures and manifolds
EN ISO 13628-15:2011 Petroleum and natural gas industries - Design and operation of subsea production systems - Part 15: Subsea structures and manifolds (ISO 13628-15:2011)
EN ISO 19904-1:2006 Petroleum and natural gas industries - Floating offshore structures - Part 1: Monohulls, semi-submersibles and spars (ISO 19904-1:2006)
08/30193145 DC : 0 BS EN ISO 13628-1:2005/AMD 1 - PETROLEUM AND NATURAL GAS INDUSTRIES - DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - PART 1: GENERAL REQUIREMENTS AND RECOMMENDATIONS
NACE RP 03 87 : 0 METALLURGICAL AND INSPECTION REQUIREMENTS FOR CAST SACRIFICIAL ANODES FOR OFFSHORE APPLICATIONS
CSA ISO 19904-1 : 2007 : R2012 PETROLEUM AND NATURAL GAS INDUSTRIES - FLOATING OFFSHORE STRUCTURES - PART 1: MONOHULLS, SEMI-SUBMERSIBLES AND SPARS
CSA ISO 19904-1 : 2007 PETROLEUM AND NATURAL GAS INDUSTRIES - FLOATING OFFSHORE STRUCTURES - PART 1: MONOHULLS, SEMI-SUBMERSIBLES AND SPARS
API 16D CHINESE : 2004 SPECIFICATION FOR CONTROL SYSTEMS FOR DRILLING WELL CONTROL EQUIPMENT AND CONTROL SYSTEMS FOR DIVERTER EQUIPMENT
CSA C61400-3 : 2011 WIND TURBINES - PART 3: DESIGN REQUIREMENTS FOR OFFSHORE WIND TURBINES
API 16D:2004 SPECIFICATION FOR CONTROL SYSTEMS FOR DRILLING WELL CONTROL EQUIPMENT AND CONTROL SYSTEMS FOR DIVERTER EQUIPMENT
I.S. EN 12496:2013 GALVANIC ANODES FOR CATHODIC PROTECTION IN SEAWATER AND SALINE MUD
I.S. EN 61400-3:2009 WIND TURBINES - PART 3: DESIGN REQUIREMENTS FOR OFFSHORE WIND TURBINES
API 14F REDLINE : 2008 DESIGN, INSTALLATION, AND MAINTENANCE OF ELECTRICAL SYSTEMS FOR FIXED AND FLOATING OFFSHORE PETROLEUM FACILITIES FOR UNCLASSIFIED AND CLASS 1, DIVISION 1 AND DIVISION 2 LOCATIONS
EN ISO 13703:2000/AC:2007 PETROLEUM AND NATURAL GAS INDUSTRIES - DESIGN AND INSTALLATION OF PIPING SYSTEMS ON OFFSHORE PRODUCTION PLATFORMS
BS EN ISO 13628-4:1999 Petroleum and natural gas industries. Design and operation of subsea production systems Subsea wellhead and tree equipment
NACE 30105 : 0 ELECTRICAL ISOLATION/CONTINUITY AND COATING ISSUES FOR OFFSHORE PIPELINE CATHODIC PROTECTION SYSTEMS
UNI EN ISO 19902 : 2013 PETROLEUM AND NATURAL GAS INDUSTRIES - FIXED STEEL OFFSHORE STRUCTURES

API 2A WSD : 2014 PLANNING, DESIGNING, AND CONSTRUCTING FIXED OFFSHORE PLATFORMS - WORKING STRESS DESIGN
NACE 3 : 2007 COMMERCIAL BLAST CLEANING
ISO 8501-1:2007 Preparation of steel substrates before application of paints and related products — Visual assessment of surface cleanliness — Part 1: Rust grades and preparation grades of uncoated steel substrates and of steel substrates after overall removal of previous coatings
NACE 7L198 : 2009 DESIGN OF GALVANIC ANODE CATHODIC PROTECTION SYSTEMS FOR OFFSHORE STRUCTURES
NACE RP 03 87 : 0 METALLURGICAL AND INSPECTION REQUIREMENTS FOR CAST SACRIFICIAL ANODES FOR OFFSHORE APPLICATIONS
ASTM G 153 : 2013 : REDLINE Standard Practice for Operating Enclosed Carbon Arc Light Apparatus for Exposure of Nonmetallic Materials
SSPC-SP 10 : 2015 NEAR-WHITE BLAST CLEANING
ASTM D 4285 : 1983 : R2018 Standard Test Method for Indicating Oil or Water in Compressed Air
MIL A 18001 : K ANODES, SACRIFICIAL ZINC ALLOY
MIL-STD-2138 Revision A:1992 METAL SPRAYED COATINGS FOR CORROSION PROTECTION ABOARD NAVAL SHIPS
ASTM D 2247 : 2015 : REDLINE Standard Practice for Testing Water Resistance of Coatings in 100 % Relative Humidity
ASTM G 154 : 2016 : REDLINE Standard Practice for Operating Fluorescent Ultraviolet (UV) Lamp Apparatus for Exposure of Nonmetallic Materials
ASTM G 152 : 2013 : REDLINE Standard Practice for Operating Open Flame Carbon Arc Light Apparatus for Exposure of Nonmetallic Materials
NACE 4 : 2007 BRUSH-OFF BLAST CLEANING
SSPC-SP 6 : 2015 COMMERCIAL BLAST CLEANING
ASTM G 155 : 2013 : REDLINE Standard Practice for Operating Xenon Arc Light Apparatus for Exposure of Non-Metallic Materials
NACE RP 01 69 : 2002 CONTROL OF EXTERNAL CORROSION ON UNDERGROUND OR SUBMERGED METALLIC PIPING SYSTEMS
API 2A LRFD : 1993 RECOMMENDED PRACTICE FOR PLANNING, DESIGNING AND CONSTRUCTING FIXED OFFSHORE PLATFORMS - LOAD AND RESISTANCE FACTOR DESIGN
SSPC-SP 5 : 2015 WHITE METAL BLAST CLEANING
ASTM D 522 : 1993 : REV A Standard Test Methods for Mandrel Bend Test of Attached Organic Coatings
NACE RP 02 87 : 2002 FIELD MEASUREMENT OF SURFACE PROFILE OF ABRASIVE BLAST-CLEANED STEEL SURFACES USING A REPLICA TAPE
ASTM D 3359 : 2017 : REDLINE Standard Test Methods for Rating Adhesion by Tape Test
SSPC-SP 7 : 2015 BRUSH-OFF BLAST CLEANING

View more information
$299.70
Including GST where applicable

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.

Need help?
Call us on 131 242, then click here to start a Screen Sharing session
so we can help right away! Learn more