Retrofit Lamps—Minimum Performance Requirements

Published date

23-02-2012

Publisher

National Electrical Manufacturers Association

FOREWORD
1 General
2 Definitions
3 Requirements for all Lamps
4 Non-Standard Lamps
5 Replacement Lamps
6 Omnidirectional Lamps
7 Decorative Lamps
8 Directional Lamps
9 Optional Requirements

Applies to integral Light Emitting Diode (LED) lamps, which is defined as a lamp with LEDs, LED driver, and base meeting appropriate American National Standards (ANSs).

DocumentType	Standard
PublisherName	National Electrical Manufacturers Association
Status	Current

CAN/CSA-C871-13 (R2018)

Performance of LED replacement lamps

IEEE C62.41-1991	IEEE Recommended Practice for Surge Voltages in Low-Voltage AC Power Circuits
UL 1993:5ED 2017-01	Self-Ballasted Lamps and Lamp Adapters
ANSI C81.61 : 2017	ELECTRIC LAMP BASES - SPECIFICATIONS FOR BASES (CAPS) FOR ELECTRIC LAMPS
ANSI C78.21 : 2011(R2016)	American National Standard for Electric Lamps—PAR and R Shapes
IES LM 80 : 2015	MEASURING LUMINOUS FLUX AND COLOR MAINTENANCE OF LED PACKAGES, ARRAYS AND MODULES
IES LM 28 : 2012	APPROVED METHOD: IES GUIDE FOR THE SELECTION, CARE AND USE OF ELECTRICAL INSTRUMENTS IN THE PHOTOMETRIC LABORATORY
ANSI C78.20:2003(R2007)	American National Standard for Electric Lamps—A, G, PS, and Similar Shapes with E26 Medium Screw Bases
ANSI C78.24:2001	American National Standard for Electric Lamps—Two-inch (51 mm) Integral-Reflector Lamps with Front Covers and GU5.3 or GX5.3 Bases
ANSI C78.377 : 2015	ELECTRIC LAMPS - SPECIFICATIONS FOR THE CHROMATICITY OF SOLID-STATE LIGHTING PRODUCTS
ANSI C79.1:2002	American National Standard for Nomenclature for Glass Bulbs Intended for Use with Electric Lamps
IES LM 79 : 2008	ELECTRICAL AND PHOTOMETRIC MEASUREMENTS OF SOLID-STATE LIGHTING PRODUCTS