NF EN 1999-1-4 : 2007 AMD 1 2011
Current
The latest, up-to-date edition.
EUROCODE 9: DESIGN OF ALUMINIUM STRUCTURES - PART 1-4: COLD-FORMED STRUCTURAL SHEETING
12-01-2013
Avant-propos
1 Généralités
1.1 Domaine d'application
1.2 Références normatives
1.3 Termes et définitions
1.4 Symboles
1.5 Géométrie et conventions pour les dimensions
2 Base de calcul
3 Matériaux
3.1 Généralités
3.2 Alliages d'aluminium de structure
3.3 Fixations mécaniques
4 Durabilité
5 Analyse structurale
5.1 Influence des angles arrondis
5.2 Proportions géométriques
5.3 Modélisation structurale pour analyse
5.4 Incurvation de la semelle
5.5 Voilement local et par distorsion
6 États limites ultimes
6.1 Résistance des sections transversales
6.2 Résistance au flambement
6.3 Calcul de revêtement travaillant
6.4 Toles perforées avec trous de la forme d'un
triangle équilatéral
7 États limites de service
7.1 Généralités
7.2 Déformation plastique
7.3 Flèches
8 Liaison par fixations mécaniques
8.1 Généralités
8.2 Rivets aveugles
8.3 Vis auto-taraudeuses/auto-perceuses
9 Calcul assisté par essais
Annexe A (normative) Modes opératoires d'essai
A.1 Généralités
A.2 Essais sur toles profilées
A.3 Évaluation des résultats des essais
Annexe B (informative) Durabilité des fixations
Bibliographie
Provides design requirements for cold-formed trapezoidal aluminium sheeting. It applies to cold-formed aluminium products made from hot rolled or cold rolled sheet or strip that have been cold-formed by such processes as cold-rolled forming or press-breaking.
| DevelopmentNote |
Indice de classement: P22-154. PR NF EN 1999-1-4 August 2006. (08/2006) Supersedes DTU P 22-702. (08/2017)
|
| DocumentType |
Standard
|
| PublisherName |
Association Francaise de Normalisation
|
| Status |
Current
|
| Supersedes |
| Standards | Relationship |
| NEN EN 1999-1-4 : 2011 | Identical |
| I.S. EN 1999-1-4:2007 | Identical |
| BS EN 1999-1-4 : 2007 | Identical |
| NS EN 1999-1-4 : 2007 AMD 1 2011 | Identical |
| NBN EN 1999-1-4 : 2007 AMD 1 2011 | Identical |
| NF EN 1999-1-3 : 2007 AMD 1 2012 | EUROCODE 9: DESIGN OF ALUMINIUM STRUCTURES - PART 1-3: STRUCTURES SUSCEPTIBLE TO FATIGUE |
| NF EN 1999-1-1 : 2007 AMD 2 2014 | EUROCODE 9 - DESIGN OF ALUMINIUM STRUCTURES - PART 1-1: GENERAL STRUCTURAL RULES |
| NFP 93 551 : 2016 | BUILDING SITE EQUIPMENT - LOAD BEARING TOWERS - TECHNICAL SPECIFICATIONS - DESIGN - TESTS |
| NF EN 1090-3 : 2009 | EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 3: TECHNICAL REQUIREMENTS FOR ALUMINIUM STRUCTURES |
| NF EN ISO 15480 : 1999 | HEXAGON WASHER HEAD DRILLING SCREWS WITH TAPPING SCREW THREAD |
| NF EN ISO 15973 : 2001 | CLOSED END BLIND RIVETS WITH BREAK PULL MANDREL AND PROTRUDING HEAD - AIA/ST |
| NF EN ISO 7049 : 2011 | CROSS-RECESSED PAN HEAD TAPPING SCREWS |
| NF EN 485-2 : 2016 | ALUMINIUM AND ALUMINIUM ALLOYS - SHEET, STRIP AND PLATE - PART 2: MECHANICAL PROPERTIES |
| NF EN 1990:2003 AMD 1 2006 | EUROCODE - BASIS FOR DESIGN |
| NF EN ISO 15481 : 1999 | CROSS RECESSED PAN HEAD DRILLING SCREWS WITH TAPPING SCREW THREAD |
| NF EN ISO 1479 : 2011 | HEXAGON HEAD TAPPING SCREWS |
| NF EN ISO 15974 : 2001 | CLOSED AND BLIND RIVETS WITH BREAK PULL MANDREL AND COUNTERSUNK HEAD - AIA/ST |
| NF EN 1995-1-1 : 2005 AMD 2 2014 | EUROCODE 5: DESIGN OF TIMBER STRUCTURES - PART 1-1: GENERAL - COMMON RULES AND RULES FOR BUILDINGS |
| NF EN 1999-1-1 : 2007 AMD 2 2014 | EUROCODE 9 - DESIGN OF ALUMINIUM STRUCTURES - PART 1-1: GENERAL STRUCTURAL RULES |
| NF EN ISO 15982 : 2003 | OPEN END BLIND RIVETS WITH BREAK PULL MANDREL AND COUNTERSUNK HEAD - AIA/AIA |
| NF EN 10088-1 : 2014 | STAINLESS STEELS - PART 1: LIST OF STAINLESS STEELS |
| NF EN 1090-1 : 2009 + A1 2012 | EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 1: REQUIREMENTS FOR CONFORMITY ASSESSMENT OF STRUCTURAL COMPONENTS |
| NF EN ISO 15981 : 2003 | OPEN END BLIND RIVETS WITH BREAK PULL MANDREL AND PROTRUDING HEAD - AIA/AIA |
| NF EN 10002-1 : 2001 | METALLIC MATERIALS - TENSILE TESTING - PART 1: METHOD OF TEST AT AMBIENT TEMPERATURE |
| NF EN ISO 15978 : 2003 | OPEN END BLIND RIVETS WITH BREAK PULL MANDREL AND COUNTERSUNK HEAD - AIA/ST |
| NF EN ISO 1481 : 2011 | SLOTTED PAN HEAD TAPPING SCREWS |
| NF EN 1090-3 : 2009 | EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 3: TECHNICAL REQUIREMENTS FOR ALUMINIUM STRUCTURES |
| NF EN ISO 15977 : 2003 | OPEN END BLIND RIVETS WITH BREAK PULL MANDREL AND PROTRUDING HEAD - AIA/ST |
| NF EN 1396 : 2015 | ALUMINIUM AND ALUMINIUM ALLOYS - COIL COATED SHEET AND STRIP FOR GENERAL APPLICATIONS - SPECIFICATIONS |
| NF EN 508-2 : 2008 | ROOFING PRODUCTS FROM METAL SHEET - SPECIFICATION FOR SELF-SUPPORTING PRODUCTS OF STEEL, ALUMINIUM OR STAINLESS STEEL SHEET - PART 2: ALUMINIUM |