NF EN 4626-001 : 2008
Current
Current
The latest, up-to-date edition.
AEROSPACE SERIES - CONNECTORS, OPTICAL, RECTANGULAR, MULTICONTACT, RACK AND PANEL, QUADRAX CAVITY, 2,5 MM DIAMETER FERRULE - OPERATING TEMPERATURES -65 DEGREES C TO 125 DEGREES C (CABLE DEPENDENT) - FLUSH CONTACTS - PART 001: TECHNICAL SPECIFICATION
Published date
12-01-2013
Publisher
Sorry this product is not available in your region.
Avant-propos
Introduction
1 Domaine d'application
2 Références normatives
3 Termes et définitions
4 Description
5 Conception
6 Dessins
7 Essais
8 Assurance qualité
9 Désignation et marquage
Describes the general characteristics, the conditions for qualification, acceptance and quality assurance, as well as the test programs and groups for fibre sub-assemble contact in rack and panel connectors, intended for use in a temperature range from -65 degrees C to 125 degrees C continuous (cable dependent).
| DevelopmentNote |
Indice de classement: L54-101-001. PR NF EN 4626-001 December 2007. (12/2007)
|
| DocumentType |
Standard
|
| PublisherName |
Association Francaise de Normalisation
|
| Status |
Current
|
| Standards | Relationship |
| EN 4626-001:2008 | Identical |
| PREN 4626-001 : 200P1 | Identical |
| EN 2591-311:1997 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 311: Low air pressure |
| EN 2591-319:1997 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 319: Gastightness of solderless wrapped connections |
| EN 2591-6401:2001 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 6401: Optical elements - Acceleration steady state |
| EN 2591-6324:2001 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 6324: Optical elements - Interfacial sealing |
| EN 2591-6405:2001 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 6405: Optical elements - Axial load |
| EN 2591-602:2001 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 602: Optical elements - Variation of attenuation and optical discontinuity |
| EN 2591-308:1998 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 308: Sand and dust |
| EN 2591-603:2002 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 603: Optical elements - Change of power distribution |
| EN 2591-412:1999 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 412: Contact insertion and extraction forces |
| EN 2591-612:2001 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 612: Optical elements - Effectiveness of cable attachment - Cable axial compression |
| EN 2591-610:2001 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 610: Optical elements - Effectiveness of cable attachment - Cable pulling |
| EN 2591-408:1998 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 408: Mating and unmating forces |
| EN 2591-611:2001 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 611: Optical elements - Effectiveness of cable attachment - Cable torsion |
| EN 2591-6317:2001 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 6317: Optical elements - Flammability |
| EN 2591-6307:2001 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 6307: Optical elements - Salt mist |
| EN 2591-101:1994 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 101: Visual examination |
| EN 2591-605:2002 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 605: Optical elements - Return loss |
| EN 2591-312:1997 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 312: Air leakage |
| EN 2591-102:1996 | Aerospace series - Elements of electrical and optical connection - Test methods - Part A2: Examination of dimensions and mass |
| EN 2591-607:2002 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 607: Optical elements - Immunity to ambient light coupling |
| EN 2591-6402:2001 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 6402: Optical elements - Shock |
| EN 2591-6403:2001 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 6403: Optical elements - Vibrations |
| EN 2591-614:2002 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 614: Optical elements - Connector radial compression |
| EN 2591-6316:2001 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 6316: Optical elements - Ozone resistance |
| EN 2591-410:1998 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 410: Insert retention in housing (axial) |
| EN 2591-6321:2002 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 6321: Optical elements - Damp heat, cyclic test |
| EN 2591-320:1997 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 320: Simulated solar radiation at ground level |
| EN 2591-6318:2001 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 6318: Optical elements - Fire resistance |
| EN 2591-6101:2001 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 6101: Optical elements - Visual examination |
| EN 2591-427:2001 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 427: Robustness of protective cover attachment |
| EN 2591-6404:2001 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 6404: Optical elements - Transverse load |
| EN 2591-6314:2001 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 6314: Optical elements - Immersion at low air pressure |
| EN 2591-409:1999 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 409: Contact retention in insert |
| EN 2591-313:1997 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 313: Artificial rain |
| EN 2591-609:2005 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 609: Optical elements - Effectiveness of cable attachment - Cable cyclic flexing |
| EN 2591-407:1999 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 407: Durability of contact retention system and seals |
| EN 2591-6301:2001 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 6301: Optical elements - Endurance at temperature |
| EN 2591-100:2005 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 100: General |
| EN 2591-6323:2002 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 6323: Optical elements - Thermal shock (Hermetically sealed devices) |
| EN 2591-6415:2001 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 6415: Optical elements - Test probe damage |
| EN 4626-002:2008 | Aerospace series - Connectors, optical, rectangular, multicontact, rack and panel, Quadrax cavity, 2,5 mm diameter ferrule - Operating temperatures - 65 °C to 125 °C (cable dependent) - Flush contacts - Part 002: Specification of performance and contact arrangements |
| EN 2591-604:2001 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 604: Optical elements - Cleaning capability of optical face |
| EN 2591-6303:2001 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 6303: Optical elements - Cold/low pressure and damp heat |
| EN 2591-613:2002 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 613: Optical elements - Impact test |
| EN 2591-617:2002 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 617: Optical elements - Temperature cycling |
| EN 2591-309:1997 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 309: Dry heat |
| EN 2591-304:1997 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 304: Damp heat steady state |
| EN 2591-601:2001 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 601: Optical elements - Insertion loss |
| EN 2591-411:1998 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 411: Insert retention in housing (torsional) |
| EN 2591-615:2001 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 615: Optical elements - Connection integrity at temperature |
| EN 2591-302:1997 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 302: Climatic sequence |
| EN 2591-6414:2001 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 6414: Optical elements - Unmating of lanyard release optical connection elements |
| EN 2591-6306:2001 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 6306: Optical elements - Mould growth |
| EN 2591-6315:2001 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 6315: Optical elements - Fluid resistance |
| EN 2591-6406:2001 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 6406: Optical elements - Mechanical endurance |
| EN 2591-310:1998 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 310: Cold |
| EN 2591-6305:2001 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 6305: Optical elements - Rapid change of temperature |
| EN 2591-325:2002 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 325: Ice resistance |
Summarise
Sorry this product is not available in your region.