NF EN 681-1 : 1996 AMD 3 2005
Current
The latest, up-to-date edition.
ELECTROMETRIC SEALS - MATERIALS REQUIREMENTS FOR PIPE JOINT SEALS USED IN WATER AND DRAINAGE APPLICATIONS - PART 1: VULCANIZED RUBBER
12-01-2013
Avant-propos
0 Introduction
1 Domaine d'application
2 Références normatives
3 Classification
4 Spécifications
5 Éprouvettes et température
6 Controle de qualité
7 Essais de controle du produit en usine
8 Stockage
9 Désignation
10 Marquage et étiquetage
Annexe A (normative) Détermination de la relaxation de
contrainte en tension
Annexe B (normative) Détermination de la déformation rémanente
après compression dans l'eau chaude à 110 degré C
Annexe C (normative) Détermination de la résistance des
soudures
Annexe D (informative) Guide de stockage des garnitures
d'étanchéité
Defines requirements for materials used in vulcanized rubber seals for cold potable water supply (up to 50 degree C), hot potable and non-potable water supply (to 110 degree C) and drainage, sewerage and rainwater systems (continuous flow to 45 degree C and intermittent flow up to 95 degree C). Applies to seals for all materials including iron, steel, clay, fibre cement, concrete, reinforced concrete, plastics and glass-reinforced plastic.
| DevelopmentNote |
Indice de Classement: T47-305-1PR. Supersedes NFT 47 305. (10/2001) Supersedes NFT 47 305-1. (09/2003) PR NF EN 681-1 September 2016. (09/2016)
|
| DocumentType |
Standard
|
| PublisherName |
Association Francaise de Normalisation
|
| Status |
Current
|
| Supersedes |
| Standards | Relationship |
| DIN EN 681-1:2016-07 (Draft) | Identical |
| BS EN 681-1:1996 | Identical |
| DIN EN 681-1:2006-11 | Identical |
| I.S. EN 681-1:1996 | Identical |
| UNE-EN 681-1:1996 | Identical |
| NF EN 15012 : 2008 | PLASTICS PIPING SYSTEMS - SOIL AND WASTE DISCHARGE SYSTEMS WITHIN THE BUILDING STRUCTURE - PERFORMANCE CHARACTERISTICS FOR PIPES, FITTINGS AND THEIR JOINTS |
| NFT 54 948 : 2010 | PLASTICS PIPING SYSTEMS FOR WATER TRANSPORT UNDER PRESSURE - PIPES MADE OF BIAXIAL ORIENTED POLY(VINYL CHLORIDE) (PVC-BO) AND THEIR JOINTS - SPECIFICATIONS |
| NF EN 13476-1 : 2007 | PLASTICS PIPING SYSTEMS FOR NON-PRESSURE UNDERGROUND DRAINAGE AND SEWERAGE - STRUCTURED-WALL PIPING SYSTEMS OF UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U), POLYPROPYLENE (PP) AND POLYETHYLENE (PE) - PART 1: GENERAL REQUIREMENTS AND PERFORMANCE CHARACTERISTICS |
| NF EN 14525 : 2005 | DUCTILE IRON WIDE TOLERANCE COUPLINGS AND FLANGE ADAPTORS FOR USE WITH PIPES OF DIFFERENT MATERIALS: DUCTILE IRON, GREY IRON, STEEL, PVC-U, PE, FIBRE-CEMENT |
| NF EN ISO 21003-3 : 2008 | MULTILAYER PIPING SYSTEMS FOR HOT AND COLD WATER INSTALLATIONS INSIDE BUILDINGS - PART 3: FITTINGS |
| NF EN 13476-3 : 2007 + A1 2009 | PLASTICS PIPING SYSTEMS FOR NON-PRESSURE UNDERGROUND DRAINAGE AND SEWERAGE - STRUCTURED-WALL PIPING SYSTEMS OF UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U), POLYPROPYLENE (PP) AND POLYETHYLENE (PE) - PART 3: SPECIFICATIONS FOR PIPES AND FITTINGS WITH SMOOTH INSIDE AND PROFILED OUTSIDE SURFACE, TYPE B |
| NF EN 13476-2 : 2007 | PLASTICS PIPING SYSTEMS FOR NON-PRESSURE UNDERGROUND DRAINAGE AND SEWERAGE - STRUCTURED-WALL PIPING SYSTEMS OF UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U), POLYPROPYLENE (PP) AND POLYETHYLENE (PE) - PART 2: SPECIFICATIONS FOR PIPES AND FITTINGS WITH SMOOTH INSIDE AND OUTSIDE SURFACE, TYPE A |
| NF EN ISO 15877-3 : 2009 AMD 1 2011 | PLASTICS PIPING SYSTEMS FOR HOT AND COLD WATER INSTALLATIONS - CHLORINATED POLY(VINYL CHLORIDE) (PVC-C) - PART 3: FITTINGS |
| NF EN 1401-1 : 2009 | PLASTICS PIPING SYSTEMS FOR NON-PRESSURE UNDERGROUND DRAINAGE AND SEWERAGE - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) - PART 1: SPECIFICATIONS FOR PIPES, FITTINGS AND THE SYSTEM |
| NFP 16 362 : 2006 XP | PLASTICS PIPING SYSTEMS FOR NON-PRESSURE UNDERGROUND DRAINAGE AND SEWERAGE - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) PIPES WITH STRUCTURED-WALLS AND SMOOTH SURFACED INNER AND OUTER LAYERS AND THEIR JOINTS - SPECIFICATIONS |
| NFS 61 240 : 2016 | FIREFIGHTING EQUIPMENT - SUCTION DEVICES FOR EXTERNAL FIREFIGHTING - REQUIREMENTS AND TEST METHODS |
| NFT 54 034 : 2005 | |
| NF EN ISO 15875-3 : 2004 | PLASTICS PIPING SYSTEMS FOR HOT AND COLD WATER INSTALLATIONS - CROSS LINKED POLYETHYLENE (PE-X) - PART 3: FITTINGS |
| NF EN 1825-1 : 2004 | GREASE SEPARATORS - PART 1: PRINCIPLES OF DESIGN, PERFORMANCE AND TESTING, MARKING AND QUALITY CONTROL |