NF EN 910 : 1996
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
DESTRUCTIVE TESTS ON WELDS IN METALLIC MATERIALS - BEND TESTS
12-01-2013
01-08-2010
1 Scope
2 Definitions
3 Principle
4 Denominations and symbols
5 Removal of test specimens
5.1 Removal
5.2 Marking
5.3 Heat treatment and/or ageing
5.4 Extraction
5.5 Preparation of specimens
6 Conditions of testing
6.1 Etching
6.2 Testing
6.3 Diameter of former and rollers
6.4 Distance between rollers
6.5 Bending elongation
7 Test results
8 Test report
Annexes
A (informative) Test report
Describes a method of making transverse root, face and side bend tests on test specimens taken from butt welds. Also covers a method for making longitudinal root and face bend tests for use instead of transverse bend tests for heterogeneous assemblies where base materials and/or filler metal have a significant difference in their physical and mechanical properties relative to bending.
| DevelopmentNote |
Indice de Classement: A89-203 Supersedes NFA 89 203 (04/2002)
|
| DocumentType |
Standard
|
| PublisherName |
Association Francaise de Normalisation
|
| Status |
Superseded
|
| Supersedes |
| Standards | Relationship |
| UNE-EN 910:1996 | Identical |
| EN 910 : 1996 | Identical |
| I.S. EN 910:1996 | Identical |
| DIN EN 910:1996-05 | Identical |
| BS EN 910:1996 | Identical |
| NF EN 10217-5 : 2002 AMD 1 2005 | WELDED STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 5: SUBMERGED ARC WELDED NON-ALLOY AND ALLOY STEEL TUBES WITH SPECIFIED ELEVATED TEMPERATURE PROPERTIES |
| NF EN 12953-5 : 2002 | SHELL BOILERS - PART 5: INSPECTION DURING CONSTRUCTION, DOCUMENTATION AND MARKING OF PRESSURE PARTS OF THE BOILER |
| NF EN 1474-1 : 2009 | INSTALLATION AND EQUIPMENT FOR LIQUEFIED NATURAL GAS - DESIGN AND TESTING OF MARINE TRANSFER SYSTEMS - PART 1: DESIGN AND TESTING OF TRANSFER ARMS |
| NF EN 10217-6 : 2002 AMD 1 2005 | WELDED STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 6: SUBMERGED ARC WELDED NON-ALLOY STEEL TUBES WITH SPECIFIED LOW TEMPERATURE PROPERTIES |
| NF EN 10217-1 : 2002 AMD 1 2005 | WELDED STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 1: NON-ALLOY STEEL TUBES WITH SPECIFIED ROOM TEMPERATURE PROPERTIES |
| NFL 06 387 : A2007 | WELDED AND BRAZED ASSEMBLIES FOR AEROSPACE CONSTRUCTIONS - JOINTS OF METALLIC MATERIALS BY ELECTRON BEAM WELDING - QUALITY OF WELDED ASSEMBLIES |
| NF EN 10217-3 : 2002 AMD 1 2005 | WELDED STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 3: ALLOY FINE GRAIN STEEL TUBES |
| NFL 06 394 : 2010 | WELDMENTS AND BRAZEMENTS FOR AEROSPACE STRUCTURES - ASSEMBLY OF METALLIC MATERIALS WELDED BY TIG METHOD - QUALITY OF WELDMENTS |
| NF EN 10253-2 : 2009 | BUTT WELDING PIPE FITTINGS - PART 2: NON ALLOY AND FERRITIC ALLOY STEELS WITH SPECIFIC INSPECTION REQUIREMENTS |