NFP 22 311 : 92 AMD 2 2002 XP
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
STEEL CONSTRUCTION - EUROCODE 3: "DESIGN OF STEEL STRUCTURES" AND NATIONAL APPLICATION DOCUMENT - PART 1-1: GENERAL RULES AND RULES FOR BUILDINGS
Published date
12-01-2013
Publisher
Superseded date
01-01-2010
Superseded by
Sorry this product is not available in your region.
| DevelopmentNote |
Indice de classement: P22-311XP. XP NFP 22 311 December 1992. XP NFP 22 311 Amendment 1 November 1999. XP NFP 22 311 Amendment 2 September 2002. (03/2003)
|
| DocumentType |
Miscellaneous Product
|
| PublisherName |
Association Francaise de Normalisation
|
| Status |
Superseded
|
| SupersededBy |
| Standards | Relationship |
| ENV 1993-1-1:1992/A2:1998 | Identical |
| NFE 25 812 : 2004 | HIGH-STRENGTH STRUCTURAL BOLTING FOR PRELOADING - HRC SYSTEM - PRELOADED BOLTS |
| NFP 22 501-1 : 98 XP | EXECUTION OF STEEL STRUCTURES - PART 1: GENERAL RULES AND RULES FOR BUILDINGS |
| NFP 98 550 : 96 XP | VERTICAL ROAD TRAFFIC SIGNS - GANTRIES, CANTILEVERS AND HIGH MASTS - CALCULATION SPECIFICATIONS, INSTALLATION AND CONTROL |
| NFD 65 031 : 2009 | SHOP/STORE PRODUCT DISPLAY EQUIPMENT - METHODOLOGY AND CALCULATION METHOD FOR DETERMINATION OF GONDOLA CHARACTERISTICS |
| NF ENV 1993 1-3 : 99 XP | STEEL CONSTRUCTION - EUROCODE 3: DESIGN OF STEEL STRUCTURES AND NATIONAL APPLICATION DOCUMENT - PART 1-3: GENERAL RULES - SUPPLEMENTARY RULES FOR COLD FORMED THIN GAUGE MEMBERS AND SHEETING |
| NFA 81 310 : 1980 | BARE ELECTRIC WIRES, SOLID OR FLUX-CORED, FOR THE GAS-SHIELDED OR NON GAS-SHIELDED METAL ARC WELDING - DIAMETER OF THE WIRES |
| NF EN 10142 : 2000 | BANDES ET TOLES EN ACIERS DOUX GALVANISEES A CHAUD ET EN CONTINU POUR FORMAGE A FROID - CONDITIONS TECHNIQUES DE LIVRAISON |
| EURONORM 54 : 1980 | HOT-ROLLED SMALL U-BEAMS |
| NFA 36 270 : 1991 | IRON AND STEEL - PROFILED PLATES IN ROLLING DIRECTION |
| DTU P 06-006 : 2009 | N 84 RULES - ACTIONS OF SNOW ON STRUCTURES |
| NFP 22 250 : 1978 | METAL STRUCTURES - WELDED ASSEMBLIES OF CIRCULAR HOLLOW SECTIONS - DESIGN AND INSPECTION |
| NFP 06 001 : 1986 | BASES FOR DESIGN OF STRUCTURES - WORKING LOADS FOR BUILDINGS |
| EURONORM 57 : 1978 | HOT-ROLLED ROUND-EDGE UNEQUAL ANGLE STEEL |
| ENV 1991-3:1995/AC:1998 | EUROCODE 1 - BASIS OF DESIGN AND ACTIONS ON STRUCTURES - TRAFFIC LOADS ON BRIDGES |
| NFP 22 463 : 1978 | METAL CONSTRUCTION - JOINTING BY MEANS OF BOLTS WITH CONTROLLED TIGHTENING - EXECUTION OF JOINTS |
| EN 10048:1996 | Hot rolled narrow steel strip - Tolerances on dimensions and shape |
| EURONORM 55 : 1980 | HOT-ROLLED ROUND-EDGE EQUAL ANGLE T-BEAMS |
| NF EN 288-3 : 92 AMD 1 97 | SPECIFICATION AND APPROVAL OF WELDING PROCEDURES FOR METALLIC MATERIALS - WELDING PROCEDURE TESTS FOR THE ARC WELDING OF STEELS |
| NF EN 20225 : 1992 | FASTENERS - BOLTS, SCREWS, STUDS AND NUTS - SYMBOLS AND DESIGNATION OF DIMENSIONS |
| NFA 46 012 : 1983 | IRON AND STEEL PRODUCTS - WIDE STEEL FLATS - ROLLING TOLERANCES |
| NFP 22 469 : 1978 FD | METAL CONSTRUCTION - JOINTING BY MEANS OF BOLTS WITH CONTROLLED TIGHTENING - CALIBRATION OF TORQUE WRENCHES |
| NFA 45 205 : 83 FD | IRON AND STEEL - IPE SECTION - PARALLEL FLANGED BEAMS |
| NFE 25 005 : 2005 | FASTENERS - TEST METHODS |
| ENV 1993-2 : 1997 | EUROCODE 3: DESIGN OF STEEL STRUCTURES - PART 2: STEEL BRIDGES |
| NFA 81 309 : 1975 | METALLIC COVERED ELECTRODES FOR MANUAL ELECTRIC ARC WELDING OF UNALLOYED AND LOW ALLOYED STEELS - FILLER MATERIALS |
| NF EN 10163-2 : 2005 | DELIVERY REQUIREMENTS FOR SURFACE CONDITION OF HOT-ROLLED STEEL PLATES, WIDE FLATS AND SECTIONS - PART 2: PLATES AND WIDE FLATS |
| NFP 22 630 : 1992 XP | STEEL CONSTRUCTION - STEEL SILOS - DESIGN LOADS IN SILOS |
| NF EN 10025 : 1993 | PRODUITS LAMINES A CHAUD EN ACIERS DE CONSTRUCTION NON ALLIES - CONDITIONS TECHNIQUES DE LIVRAISON |
| NF EN 288-2 : 92 AMD 1 97 | SPECIFICATION AND APPROVAL OF WELDING PROCEDURES FOR METALLIC MATERIALS - WELDING PROCEDURE SPECIFICATION FOR ARC WELDING |
| NFA 81 302 : 1988 | METALLIC COVERED ELECTRODES FOR MANUAL ELECTRIC ARC WELDING OF MILD AND LOW ALLOYED STEELS - MECHANICAL, DIMENSIONAL AND PHYSICAL TESTS |
| ENV 1991-4 : DRAFT 95 | EUROCODE 1 - BASIS OF DESIGN AND ACTIONS ON STRUCTURES - ACTIONS IN SILOS AND TANKS |
| EN 10164:2004 | Steel products with improved deformation properties perpendicular to the surface of the product - Technical delivery conditions |
| NF EN 26157-1 : 1992 | FASTENERS - SURFACE DISCONTINUITIES - PART 1: BOLTS, SCREWS AND STUDS FOR GENERAL REQUIREMENTS |
| ENV 1991-5 : 1998 | EUROCODE 1: BASIS OF DESIGN AND ACTIONS ON STRUCTURES |
| EURONORM 24 : 1962 | NORMAL I-BEAMS, U-BEAMS; PERMISSIBLE DEVIATIONS |
| NF EN 10163-3 : 2005 | DELIVERY REQUIREMENTS FOR SURFACE CONDITION OF HOT ROLLED STEEL PLATES, WIDE FLATS AND SECTIONS - PART 3: SECTIONS |
| NFE 27 156 : 1983 | FASTENERS - STRUCTURAL ROUND HEAD RIVETS |
| NFA 81 357 : 86 XP | ARC WELDING - BARE FLUX-CORED WIRES DEPOSITING A LOW-TEMPERATURE STEEL - TESTS |
| NFA 45 209 : 83 FD | IRON AND STEEL - IPN SECTIONS - DIMENSIONS |
| NFP 22 255 : 1979 | METAL CONSTRUCTION - HOLLOW SECTION WELDED ASSEMBLIES ON TYPE I AND H SECTIONS - DESIGN AND VERIFICATION |
| NFA 81 340 : 1979 | COVERED METALLIC ELECTRODES FOR ELECTRIC MANUAL ARC WELDING DEPOSITING A HIGH YIELD STRENGTH METAL - SYMBOLIZATION - FILLER MATERIALS |
| NFA 45 202 : 1986 | IRON AND STEEL - INCLINED FACE FLANGE SECTIONS (UPN) - DIMENSIONS |
| ISO 2394:2015 | General principles on reliability for structures |
| NFP 22 464 : 1991 | STEEL CONSTRUCTION - JOINT WITH CONTROLLED TIGHTENING BOLTS - INSTALLATION SCHEDULE |
| EN 10034:1993 | Structural steel I and H sections - Tolerances on shape and dimensions |
| NF EN 10113-1 : 1993 | PRODUITS LAMINES A CHAUD EN ACIERS DE CONSTRUCTION SOUDABLE A GRAINS FINS - PARTIE 1: CONDITIONS GENERALES DE LIVRAISON |
| NFA 36 102 : 1993 | IRON AND STEEL - CONTINUOUSLY HOT-ROLLED STRIP OF NON-ALLOY AND ALLOY STEELS FOR COLD RE-ROLLING - TECHNICAL DELIVERY CONDITIONS |
| NFP 22 473 : 1986 | METAL CONSTRUCTION - WELDED ASSEMBLIES - RANGES OF NON-DESTRUCTIVES CONTROL |
| NFP 22 462 : 1978 | METAL CONSTRUCTION - JOINTING BY MEANS OF BOLTS WITH CONTROLLED TIGHTENING - FABRICATION AND PREPARATION OF JOINTS |
| NF EN 10147 : 2000 | BANDES ET TOLES EN ACIERS DE CONSTRUCTION GALVANISEES A CHAUD EN CONTINU - CONDITIONS TECHNIQUES DE LIVRAISON |
| NFA 45 008 : 1983 | IRON AND STEEL PRODUCTS - HOT ROLLED T-BARS WITH EQUAL OR UNEQUAL FLANGES AND ROUNDED CORNERS - DIMENSIONS |
| NFA 81 322 : 1988 | SOUDAGE A L'ARC SOUS FLUX EN POUDRE - COUPLES FILS ELECTRODES METALLIQUES NUS MASSIES/FLUX EN POUDRE DEPOSANT UN ACIER OU CONTENANT DE FAIBLES QUANTITIES D'ELEMENTS D'ADDITION - SYMBOLISATION - SPECIFICATIONS - ESSAIS |
| NF EN 20898-2 : 1994 | MECHANICAL PROPERTIES OF FASTENERS - PART 2: NUTS WITH SPECIFIED PROOF LOAD VALUES - COARSE THREAD |
| NFX 02 006 : 1994 | FUNDAMENTAL STANDARDS - THE INTERNATIONAL SYSTEMS OF UNITS - DESCRIPTION AND RULES FOR USE - CHOICE OF MULTIPLES AND SUB-MULTIPLES |
| DTU P 06 002 : 2009 | RULES NV 65 - RULES DEFINING THE EFFECTS ON BUILDINGS OF SNOW AND WINDS AND APPENDICES |
| NFA 91 011 : 85 FD | METALLIC COATINGS - STANDARD DESIGNATIONS FOR CONDITIONS OF USE |
| NFA 91 010 : 1984 | METALLIC COATINGS AND SURFACE TREATMENTS OF METALS - TERMINOLOGY - CLASSIFICATION - SYMBOLS |
| NFA 36 204 : 1992 | IRON AND STEEL PRODUCTS - HIGH STRENGTH TREATED STEELS FOR WELDED ASSEMBLIES - GRADES AND QUALITIES |
| NFA 37 101 : 1977 | IRON AND STEEL PRODUCTS - COLD FORMED STEEL SECTIONS FOR GENERAL PURPOSES |
| NF EN 287-1 : 2011 | QUALIFICATION TEST OF WELDERS - FUSION WELDING - PART 1: STEELS |
| DTUP 22-201 : 1964 | METAL CONSTRUCTION WORK FOR BUILDING - STRUCTURAL STEELWORK CONTRACT BILL AND CONTRACT BILL OF THE SPECIAL CLAUSES |
| EURONORM 53 : 1962 | HOT-ROLLED BROAD FLANGED I-BEAMS (WIDE-FLANGED I-BEAMS) WITH PARALLEL FLANGE FACINGS |
| NFA 49 541 : 1986 | STEEL TUBES - COLD FINISHED WELDED STRUCTURAL HOLLOW SECTIONS - DIMENSIONS - TECHNICAL DELIVERY CONDITIONS |
| NFA 81 341 : 1988 | COVERED METALLIC ELECTRODES FOR ELECTRIC MANUAL ARC WELDING DEPOSITING A HIGH YIELD STRENGTH METAL - MECHANICAL TESTS - CHEMICAL ANALYSIS - DIMENSIONAL AND PHYSICAL TESTS |
| NFA 45 007 : 83 FD | IRON AND STEEL - SMALL HOT ROLLED U IRON BARS - DIMENSIONS AND TOLERANCES |
| NF EN 10051 : 2011 | HOT-ROLLED STRIP AND PLATE/SHEET CUT FROM WIDE STRIP OF NON-ALLOY AND ALLOY STEELS - TOLERANCES ON DIMENSIONS AND SHAPE |
| NFE 27 711 : 1982 | LOCKING BOLTS AND NUTS INTENDED FOR USE IN METAL STRUCTURES - HEXAGON BOLTS - DIMENSIONS AND TOLERANCES |
| NFP 22 472 : 1994 | STEEL CONSTRUCTION - WELDED CONNECTIONS - APPROVAL OF A WELDING PROCEDURE |
| EURONORM 56 : 1977 | HOT-ROLLED ROUND-EDGE EQUAL ANGLE STEEL |
| NFA 81 312 : 1988 | SOLID BARE METALLIC ELECTRODE WIRES FOR THE GAS-SHIELDED ARC WELDING DEPOSITING AN UNALLOYED OR LOW ALLOY METAL - CHEMICAL ANALYSIS - MECHANICAL, GEOMETRICAL AND PHYSICAL TESTS |
| NFP 22 470 : 1989 | STEEL CONSTRUCTION - WELDED CONNECTIONS - DETAILS AND DESIGN OF WELDS |
| EURONORM 19 : 1957 | IPE BEAMS - I-BEAMS WITH PARALLEL FLANGE FACINGS |
| NFP 22 466 : 1979 | METAL CONSTRUCTION - JOINTING BY MEANS OF BOLTS WITH CONTROLLED TIGHTENING - METHODS OF TIGHTENING AND CHECKING OF BOLTS |
| NFP 22 431 : 1978 | METAL CONSTRUCTION - ASSEMBLY BY NON-PRESTRESSED BOLTS - EXECUTION OF ASSEMBLIES |
| NFP 22 460 : 1979 | METAL CONSTRUCTION - JOINTING BY MEANS OF BOLTS WITH CONTROLLED TIGHTENING - STRUCTURES REQUIREMENTS AND CHECKING OF JOINTING |
| NFA 45 001 : 1994 | IRON AND STEEL - HOT ROLLED BARS OR MERCHANT BARS AND SECTIONS FOR GENERAL PURPOSES - TOLERANCES ON SHAPE AND DIMENSIONS |
| NFA 49 501 : 1986 | STEEL TUBES - HOT-FINISHED SEAMLESS OF WELDED STRUCTURAL HOLLOW SECTIONS - DIMENSIONS - TECHNICAL DELIVERY CONDITIONS |
| NFA 81 319 : 1988 | CONDUCTING FLUXES FOR SUBMERGED ARC WELDING - SYMBOLIZATION |
| EN 10143:2006 | Continuously hot-dip coated steel sheet and strip - Tolerances on dimensions and shape |
| NFP 22 251 : 1978 | METAL STRUCTURES - WELDED ASSEMBLIES OF CIRCULAR HOLLOW SECTIONS - CONSTRUCTION |
| NFP 06 004 : 1977 FD | DESIGN CRITERIA FOR STRUCTURES - PERMANENT AND SERVICE LOADS DUE TO GRAVITY |
| NF EN 10027-2 : 2015 | DESIGNATION SYSTEMS FOR STEELS - PART 2: NUMERICAL SYSTEM |
| NFA 91 122 : 1987 | METALLIC COATINGS - FINISHED PRODUCTS OF HOT DIP GALVANIZED STEEL - SPECIFICATIONS FOR THE ZINC COATING AND RECOMMENDED METHOD OF FABRICATION FOR THE PRODUCTS TO BE GALVANIZED |
| NFA 81 300 : 1980 | FILLER MATERIALS - ELECTRODES FOR MANUAL ELECTRIC ARC WELDING - TERMINOLOGY |
| NF EN 10113-2 : 1993 | PRODUITS LAMINES A CHAUD EN ACIERS DE CONSTRUCTION SOUDABLES A GRAINS FINS - PARTIE 2: CONDITIONS DE LIVRAISON DES ACIERS A L'ETAT NORMALISE/LAMINAGE NORMALISANT |
| NFA 45 206 : 1983 | IRON AND STEEL - HOT ROLLED LIGHT JOISTS - ROLLING TOLERANCES |
| NFA 35 512 : 86 FD | IRON AND STEEL - RECOMMENDATIONS FOR THE FABRICATION AND USE OF AUTOMATICALLY PRODUCED SHOT BLASTED PAINTED PRODUCTS |
| NFP 22 615 : 1978 | METAL CONSTRUCTION - ROLLING BEAMS FOR OVERHEAD CRANES - DEFORMATIONS IN OPERATION AND TOLERANCES |
| NFE 27 702 : 1984 | STRUCTURAL BOLTS AND NUTS INTENDED FOR USE IN STEEL STRUCTURES - TEST ON SUITABILITY OF BOLTS FOR USE |
| NFA 49 542 : 1987 | STEEL TUBES - GALVANIZED, LONGITUDINALLY WELDED TUBES OF ROUND, SQUARE OR RECTANGULAR CROSS-SECTION FOR METALLIC CONSTRUCTIONS - DIMENSIONS - TECHNICAL DELIVERY CONDITIONS |
| NFA 35 504 : 1984 | IRON AND STEEL PRODUCTS - HIGH STRENGTH STEEL BEAMS AND SECTIONS FOR WELDED STRUCTURES - GRADES AND QUALITIES |
| NFA 35 502 : 1984 | STRUCTURAL STEELS WITH IMPROVED ATMOSPHERIC CORROSION RESISTANCE - SHEETS, MEDIUM AND HEAVY PLATES, WIDE FLATS, ROLLED SECTIONS AND BARS |
| NFA 36 301 : 1992 | IRON AND STEEL PRODUCTS - DRAWING AND BENDING QUALITY HOT ROLLED MILL STEEL FLAT PRODUCTS - CUTLENGTHS AND COILS - QUALITIES |
| EN 10155 : 1993 | STRUCTURAL STEELS WITH IMPROVED ATMOSPHERIC CORROSION RESISTANCE - TECHNICAL DELIVERY CONDITIONS |
| NF EN 10131 : 2006 | COLD ROLLED UNCOATED AND ZINC OR ZINC-NICKEL ELECTROLYTICALLY COATED LOW CARBON AND HIGH YIELD STRENGTH STEEL FLAT PRODUCTS FOR COLD FORMING - TOLERANCES ON DIMENSIONS AND SHAPE |
| NF EN 10029 : 2011 | HOT ROLLED STEEL PLATES 3 MM THICK OR ABOVE - TOLERANCES ON DIMENSIONS, SHAPE AND MASS |
| NFA 35 511 : 1983 | IRON AND STEEL PRODUCTS - AUTOMATICALLY PRODUCED SHOT BLASTED AND PAINTED PRODUCTS |
| NFP 22 411 : 1978 | METAL CONSTRUCTION - RIVETED ASSEMBLIES - EXECUTION OF ASSEMBLIES |
| NFA 46 323 : 1978 | IRON AND STEEL PRODUCTS - CONTINUOUS GALVANIZED STEEL STRIP - COILS - SLIT COILS - BARS - DIMENSIONS AND TOLERANCES |
| NFP 22 800 : 1981 | METAL CONSTRUCTION - PREPARATION OF PARTS IN THE FACTORY |
| NFA 81 356 : 86 XP | ARC WELDING - BARE FLUX-CORED WIRES DEPOSITING A LOW-TEMPERATURE STEEL WELD-METAL - SYMBOLIZATION - REQUIREMENTS - ACCEPTANCE |
| NFP 06 007 : 1988 FD | GENERAL PRINCIPLES ON RELIABILITY OF STRUCTURES - LIST OF EQUIVALENT TERMS |
| NFP 22 461 : 1979 | METAL CONSTRUCTION - JOINTING BY MEANS OF BOLTS WITH CONTROLLED TIGHTENING - DETERMINATION OF THE CONVENTIONAL COEFFICIENT OF FRICTION |
| NFP 22 252 : 1978 | METAL STRUCTURES - WELDED ASSEMBLIES OF CIRCULAR HOLLOW SECTIONS |
| NFA 46 100 : 1983 | IRON AND STEEL PRODUCTS - HOT ROLLED STEEL STRIPS - DIMENSIONAL TOLERANCES |
| NFA 45 255 : 1983 | IRON AND STEEL - PARALLEL FLANGE CHANNEL SECTIONS (UAP-SECTIONS) |
| NFX 02 004 : 1994 FD | FUNDAMENTAL STANDARDS - NAMES AND SYMBOLS FOR THE UNITS OF THE INTERNATIONAL SYSTEM OF UNITS |
| ENV 1993-1-3:1996/AC:1997 | EUROCODE 3: DESIGN OF STEEL STRUCTURES - GENERAL RULES - SUPPLEMENTARY RULES FOR COLD FORMED THIN GAUGE MEMBERS AND SHEETING |
| NFA 91 121 : 1987 | HOT DIP GALVANIZING (IMMERSION IN MOLTEN ZINC) - CHARACTERISTIC PROPERTIES AND TEST METHOD |
| NFA 36 202 : 1981 | IRON AND STEEL PRODUCTS - PLATES AND WIDE FLATS WITH GUARANTEED PROPERTIES IN THE DIRECTION PERPENDICULAR TO THE SURFACE |
| NF EN 10027-1 : 2017 | DESIGNATION SYSTEMS FOR STEEL - PART 1: STEEL NAMES |
| NFA 81 311 : 1980 | SOLID BARE ELECTRODE WIRES FOR THE GAS-SHIELDED ARC WELDING DEPOSITING AN UNALLOYED OR LOW ALLOY METAL - SYMBOLIZATION - FILLER MATERIALS |
| ENV 1993-1-2 : DRAFT 95 | EUROCODE 3 - DESIGN OF STEEL STRUCTURES - PART 1-2: GENERAL RULES - STRUCTURAL FIRE DESIGN |
| NFA 45 201 : 83 FD | IRON AND STEEL - BROAD, PARALLEL-FACED FLANGED BEAMS - DIMENSIONS |
| NFA 45 010 : 1979 | IRON AND STEEL PRODUCTS - HOT ROLLED UNEQUAL ANGLE STEEL SECTIONS WITH RADIUSED CORNERS - DIMENSIONS |
| ENV 1992-1-1 : DRAFT 91 COR 1992 | EUROCODE 2: DESIGN OF CONCRETE STRUCTURES - GENERAL RULES AND RULES FOR BUILDINGS |
| NFP 22 258 : 1982 | WELDED ASSEMBLIES OF HOLLOW SECTIONS AND RECTANGULAR HOLLOW SECTIONS SUBJECTED TO STATIC LOADING - DESIGN AND VERIFICATION |
| NF EN 288-1 : 92 AMD 1 97 | SPECIFICATION AND APPROVAL OF WELDING PROCEDURES FOR METALLIC MATERIALS - GENERAL RULES FOR FUSION WELDING |
| NFA 81 316 : 1980 | SOLID BARE METALLIC ELECTRODE WIRES FOR SUBMERGED ARC WELDING DEPOSITING AN UNALLOYED STEEL OR A STEEL WITH LOW LEVELS OF ADDITION ELEMENTS - SYMBOLIZATION - SPECIFICATION |
| NFA 81 301 : 1979 | COVERED ELECTRODES FOR THE MANUAL METAL-ARC WELDING OF STEEL AND ALLOYS - DIMENSIONS, GEOMETRICAL AND PHYSICAL TESTS - PACKAGING AND MARKING |
| NF EN 10130 : 2007 | COLD ROLLED LOW CARBON STEEL FLAT PRODUCTS FOR COLD FORMING - TECHNICAL DELIVERY CONDITIONS |
| NFP 22 471 : 1984 | METAL CONSTRUCTION - WELDED JOINTS - FABRICATION |
| NF EN 10163-1 : 2005 | DELIVERY REQUIREMENTS FOR SURFACE CONDITIONS OF HOT-ROLLED STEEL PLATES, WIDE FLATS AND SECTIONS - PART 1: GENERAL REQUIREMENTS |
| NFA 45 009 : 1979 | IRON AND STEEL PRODUCTS - HOT ROLLED EQUAL ANGLE STEEL SECTIONS WITH RADIUSED CORNERS - DIMENSIONS |
| NFA 45 210 : 1996 | IRON AND STEEL PRODUCTS - STANDARD BEAMS AND STANDARD CHANNEL SECTIONS - ROLLING TOLERANCES |
| EURONORM 91 : 1981 | HOT-ROLLED WIDE FLATS - PERMISSIBLE DEVIATIONS FOR DIMENSION, FORM AND WEIGHT |
| NF EN 10113-3 : 1993 | PRODUITS LAMINES A CHAUD EN ACIERS DE CONSTRUCTION SOUDABLES A GRAINS FINS - PARTIE 3: CONDITIONS DE LIVRAISON DES ACIERS OBTENUS PAR LAMINAGE THERMOMECANIQUE |
| NFA 45 211 : 1983 | IRON AND STEEL PRODUCTS - HOT ROLLED PARALLEL FACE WIDE FLANGE BEAMS - ROLLING TOLERANCES |
| NF EN 493 : 1992 | |
| NFP 00 001 : 1990 FD | BUILDING AND CIVIL ENGINEERING - VOCABULARY - PART 1: GENERAL TERMS |
| NFA 36 201 : 1984 | IRON AND STEEL PRODUCTS - HIGH YIELD STRENGTH STEEL PLATES FOR WELDED STRUCTURES - GRADES AND QUALITIES |
Summarise
Sorry this product is not available in your region.