PREN 1459-1 : DRAFT 2014
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
ROUGH-TERRAIN TRUCKS - SAFETY REQUIREMENTS AND VERIFICATION - PART 1: VARIABLE-REACH TRUCKS
Published date
10-04-2013
Publisher
Superseded date
01-09-2017
Superseded by
Sorry this product is not available in your region.
Foreword
1 Scope
2 Normative references
3 Terms and definitions
4 Safety requirements and/or protective measures
5 Verification of requirements and safety measures
6 Information for use
Annex A (informative) - List of significant hazards
Annex B (informative) - Consistency of motions
Annex C (normative) - Rules for the construction
and layout of pedals
Annex ZA (informative) - Relationship between this
European Standard and the Essential
Requirements of EU Directive 2006/42/EC
Bibliography
Describes the general safety requirements of self-propelled, variable-reach, roughterrain trucks (hereafter referred to as trucks), articulated or rigid chassis, intended to handle loads, which are equipped with a telescopic lifting means (pivoted boom), on which a load handling device (e.g., carriage and fork arms) is fitted.
| Committee |
TC 150
|
| DocumentType |
Draft
|
| PublisherName |
Comite Europeen de Normalisation
|
| Status |
Superseded
|
| SupersededBy |
| Standards | Relationship |
| 14/30302140 DC : 0 | Identical |
| NEN EN 1459-1 : 2017 | Identical |
| 13/30256922 DC : 0 | Identical |
| DIN EN 1459-3:2015-08 | ROUGH-TERRAIN TRUCKS - SAFETY REQUIREMENTS AND VERIFICATION - PART 3: INTERFACE BETWEEN THE VARIABLE-REACH TRUCK AND THE WORK PLATFORM |
| 14/30298241 DC : 0 | BS EN 16796-1 - ENERGY EFFICIENCY OF INDUSTRIAL TRUCKS - TEST METHODS - PART 1: GENERAL |
| S.R. CEN/TR 1459-6:2015 | ROUGH-TERRAIN TRUCKS - SAFETY REQUIREMENTS AND VERIFICATION - PART 6: APPLICATION OF EN ISO 13849-1 TO SLEWING AND NON-SLEWING VARIABLE-REACH ROUGH-TERRAIN TRUCK |
| CEN/TR 1459-6:2015 | Rough-terrain trucks - Safety requirements and verification - Part 6: Application of EN ISO 13849-1 to slewing and non-slewing variable-reach rough-terrain truck |
| BS EN 1459-3:2015 | Rough-terrain trucks. Safety requirements and verification Interface between the variable-reach truck and the work platform |
| BS EN 16796-1:2016 | Energy efficiency of Industrial trucks. Test methods General |
| I.S. EN 1459-3:2015 | ROUGH-TERRAIN TRUCKS - SAFETY REQUIREMENTS AND VERIFICATION - PART 3: INTERFACE BETWEEN THE VARIABLE-REACH TRUCK AND THE WORK PLATFORM |
| 17/30332527 DC : DRAFT JAN 2017 | BS EN 1459-5 - ROUGH-TERRAIN TRUCKS - SAFETY REQUIREMENTS AND VERIFICATION - PART 5 - ATTACHMENTS AND ATTACHMENT INTERFACE |
| 12/30256919 DC : 0 | BS EN 1459-3 - ROUGH-TERRAIN TRUCKS - SAFETY REQUIREMENTS AND VERIFICATION - PART 3: ADDITIONAL REQUIREMENTS FOR VARIABLE REACH TRUCKS FITTED WITH ELEVATING WORK PLATFORM |
| I.S. EN 16796-1:2016 | ENERGY EFFICIENCY OF INDUSTRIAL TRUCKS - TEST METHODS - PART 1: GENERAL |
| PD CEN/TR 1459-6:2015 | Rough-terrain trucks. Safety requirements and verification Application of EN ISO 13849-1 to slewing and non-slewing variable-reach rough-terrain truck |
| EN 16796-1:2016 | Energy efficiency of Industrial trucks - Test methods - Part 1: General |
| EN 1459-3:2015 | Rough-terrain trucks - Safety requirements and verification - Part 3: Interface between the variable-reach truck and the work platform |
| UNE-EN 16796-1:2017 | Energy efficiency of Industrial trucks - Test methods - Part 1: General |
| UNE-EN 1459-3:2015 | Rough-terrain trucks - Safety requirements and verification - Part 3: Interface between the variable-reach truck and the work platform |
| UNE-EN 1459-2:2016 | Rough-terrain trucks - Safety requirements and verification - Part 2: Slewing variable-reach trucks |
| ISO 3449:2005 | Earth-moving machinery — Falling-object protective structures — Laboratory tests and performance requirements |
| EN ISO 2860:2008 | Earth-moving machinery - Minimum access dimensions (ISO 2860:1992) |
| PREN 1459-2 : DRAFT 2013 | ROUGH-TERRAIN TRUCKS - SAFETY REQUIREMENTS AND VERIFICATION - PART 2: SLEWING VARIABLE-REACH TRUCKS |
| ISO 10532:1995 | Earth-moving machinery — Machine-mounted retrieval device — Performance requirements |
| EN ISO 11204:2010 | Acoustics - Noise emitted by machinery and equipment - Determination of emission sound pressure levels at a work station and at other specified positions applying accurate environmental corrections (ISO 11204:2010) |
| EN ISO 3164:2013 | Earth-moving machinery - Laboratory evaluations of protective structures - Specifications for deflection-limiting volume (ISO 3164:2013) |
| ISO 3164:2013 | Earth-moving machinery — Laboratory evaluations of protective structures — Specifications for deflection-limiting volume |
| ISO 10263-5:2009 | Earth-moving machinery — Operator enclosure environment — Part 5: Windscreen defrosting system test method |
| ISO 3744:2010 | Acoustics — Determination of sound power levels and sound energy levels of noise sources using sound pressure — Engineering methods for an essentially free field over a reflecting plane |
| EN ISO 6683:2008 | Earth-moving machinery - Seat belts and seat belt anchorages - Performance requirements and tests (ISO 6683:2005) |
| ISO 13333:1994 | Earth-moving machinery — Dumper body support and operator's cab tilt support devices |
| ISO/TR 11688-1:1995 | Acoustics — Recommended practice for the design of low-noise machinery and equipment — Part 1: Planning |
| ISO 15817:2012 | Earth-moving machinery — Safety requirements for remote operator control systems |
| ISO 7096:2000 | Earth-moving machinery — Laboratory evaluation of operator seat vibration |
| ISO 3411:2007 | Earth-moving machinery — Physical dimensions of operators and minimum operator space envelope |
| ISO 6683:2005 | Earth-moving machinery — Seat belts and seat belt anchorages — Performance requirements and tests |
| EN ISO 3449:2008 | Earth-moving machinery - Falling-object protective structures - Laboratory tests and performance requirements (ISO 3449:2005) |
| EN ISO 3411:2007 | Earth-moving machinery - Physical dimensions of operators and minimum operator space envelope (ISO 3411:2007) |
| EN ISO 3457:2008 | Earth-moving machinery - Guards - Definitions and requirements (ISO 3457:2003) |
| ISO 22915-20:2008 | Industrial trucks — Verification of stability — Part 20: Additional stability test for trucks operating in the special condition of offset load, offset by utilization |
| ISO 13732-1:2006 | Ergonomics of the thermal environment — Methods for the assessment of human responses to contact with surfaces — Part 1: Hot surfaces |
| ISO 5353:1995 | Earth-moving machinery, and tractors and machinery for agriculture and forestry — Seat index point |
| ISO 4413:2010 | Hydraulic fluid power — General rules and safety requirements for systems and their components |
| ISO 12508:1994 | Earth-moving machinery — Operator station and maintenance areas — Bluntness of edges |
| EN ISO 13850:2015 | Safety of machinery - Emergency stop function - Principles for design (ISO 13850:2015) |
| ISO 22915-10:2008 | Industrial trucks — Verification of stability — Part 10: Additional stability test for trucks operating in the special condition of stacking with load laterally displaced by powered devices |
| ISO 5010:2007 | Earth-moving machinery — Rubber-tyred machines — Steering requirements |
| ISO 16528-2:2007 | Boilers and pressure vessels — Part 2: Procedures for fulfilling the requirements of ISO 16528-1 |
| ISO 21507:2010 | Earth-moving machinery — Performance requirements for non-metallic fuel tanks |
| EN ISO 13857:2008 | Safety of machinery - Safety distances to prevent hazard zones being reached by upper and lower limbs (ISO 13857:2008) |
| ISO 12509:2004 | Earth-moving machinery — Lighting, signalling and marking lights, and reflex-reflector devices |
| ISO 6011:2003 | Earth-moving machinery — Visual display of machine operation |
| ISO 10896-1:2012 | Rough-terrain trucks — Safety requirements and verification — Part 1: Variable-reach trucks |
| ISO 12100:2010 | Safety of machinery — General principles for design — Risk assessment and risk reduction |
| ISO 22915-14:2010 | Industrial trucks — Verification of stability — Part 14: Rough-terrain variable-reach trucks |
| ISO 3795:1989 | Road vehicles, and tractors and machinery for agriculture and forestry — Determination of burning behaviour of interior materials |
| EN ISO 13732-1:2008 | Ergonomics of the thermal environment - Methods for the assessment of human responses to contact with surfaces - Part 1: Hot surfaces (ISO 13732-1:2006) |
| EN ISO 5353:1998 | Earth-moving machinery, and tractors and machinery for agriculture and forestry - Seat index point (ISO 5353:1995) |
| ISO 10263-3:2009 | Earth-moving machinery — Operator enclosure environment — Part 3: Pressurization test method |
| EN ISO 11201:2010 | Acoustics - Noise emitted by machinery and equipment - Determination of emission sound pressure levels at a work station and at other specified positions in an essentially free field over a reflecting plane with negligible environmental corrections (ISO 11201:2010) |
| ISO 3471:2008 | Earth-moving machinery — Roll-over protective structures — Laboratory tests and performance requirements |
| ISO 2860:1992 | Earth-moving machinery — Minimum access dimensions |
| EN 15830:2012 | Rough-terrain variable reach trucks - Visibility - Test methods and verification |
| ISO 15870:2000 | Powered industrial trucks — Safety signs and hazard pictorials — General principles |
| EN ISO 3744:2010 | Acoustics - Determination of sound power levels and sound energy levels of noise sources using sound pressure - Engineering methods for an essentially free field over a reflecting plane (ISO 3744:2010) |
| ISO 16528-1:2007 | Boilers and pressure vessels — Part 1: Performance requirements |
| EN 62061:2005/A2:2015 | SAFETY OF MACHINERY - FUNCTIONAL SAFETY OF SAFETY-RELATED ELECTRICAL, ELECTRONIC AND PROGRAMMABLE ELECTRONIC CONTROL SYSTEMS (IEC 62061:2005/A2:2015) |
| ISO 10263-2:2009 | Earth-moving machinery — Operator enclosure environment — Part 2: Air filter element test method |
| ISO 3457:2003 | Earth-moving machinery — Guards — Definitions and requirements |
| EN ISO 3471:2008 | Earth-moving machinery - Roll-over protective structures - Laboratory tests and performance requirements (ISO 3471:2008) |
| ISO 13857:2008 | Safety of machinery — Safety distances to prevent hazard zones being reached by upper and lower limbs |
| EN 13059:2002+A1:2008 | Safety of industrial trucks - Test methods for measuring vibration |
| EN ISO 6682:2008 | Earth-moving machinery - Zones of comfort and reach for controls (ISO 6682:1986, including Amd 1:1989) |
| ISO 6292:2008 | Powered industrial trucks and tractors — Brake performance and component strength |
| EN ISO 12100:2010 | Safety of machinery - General principles for design - Risk assessment and risk reduction (ISO 12100:2010) |
| ISO 10972-3:2003 | Cranes — Requirements for mechanisms — Part 3: Tower cranes |
| ISO 10263-4:2009 | Earth-moving machinery — Operator enclosure environment — Part 4: Heating, ventilating and air conditioning (HVAC) test method and performance |
| EN ISO 13849-1:2015 | Safety of machinery - Safety-related parts of control systems - Part 1: General principles for design (ISO 13849-1:2015) |
| ISO 13850:2015 | Safety of machinery — Emergency stop function — Principles for design |
| CEN/TR 1459-6:2015 | Rough-terrain trucks - Safety requirements and verification - Part 6: Application of EN ISO 13849-1 to slewing and non-slewing variable-reach rough-terrain truck |
| IEC 61310-1:2007 | Safety of machinery - Indication, marking and actuation - Part 1: Requirements for visual, acoustic and tactile signals |
| PREN 1459-3 : DRAFT 2012 | ROUGH-TERRAIN TRUCKS - SAFETY REQUIREMENTS AND VERIFICATION - PART 3: ADDITIONAL REQUIREMENTS FOR VARIABLE REACH TRUCKS FITTED WITH ELEVATING WORK PLATFORM |
| EN ISO 2867:2011 | Earth-moving machinery - Access systems (ISO 2867:2011) |
| EN 60529:1991/AC:2016-12 | DEGREES OF PROTECTION PROVIDED BY ENCLOSURES (IP CODE) (IEC 60529 EDITION 2.2 CORRIGENDUM 2:2015) |
| ISO 7000:2014 | Graphical symbols for use on equipment — Registered symbols |
| EN ISO 4413:2010 | Hydraulic fluid power - General rules and safety requirements for systems and their components (ISO 4413:2010) |
| EN ISO 11688-1:2009 | Acoustics - Recommended practice for the design of low-noise machinery and equipment - Part 1: Planning (ISO/TR 11688-1:1995) |
| EN 12053:2001+A1:2008 | Safety of industrial trucks - Test methods for measuring noise emissions |
| ISO 6016:2008 | Earth-moving machinery — Methods of measuring the masses of whole machines, their equipment and components |
| ISO 2867:2011 | Earth-moving machinery — Access systems |
| ISO 9533:2010 | Earth-moving machinery — Machine-mounted audible travel alarms and forward horns — Test methods and performance criteria |
| ISO 13849-1:2015 | Safety of machinery — Safety-related parts of control systems — Part 1: General principles for design |
| ISO 11201:2010 | Acoustics — Noise emitted by machinery and equipment — Determination of emission sound pressure levels at a work station and at other specified positions in an essentially free field over a reflecting plane with negligible environmental corrections |
| ISO 11204:2010 | Acoustics — Noise emitted by machinery and equipment — Determination of emission sound pressure levels at a work station and at other specified positions applying accurate environmental corrections |
| PREN 12895 : DRAFT 2013 | INDUSTRIAL TRUCKS - ELECTROMAGNETIC COMPATIBILITY |
| EN 15000:2008 | Safety of industrial trucks - Self propelled variable reach trucks - Specification, performance and test requirements for longitudinal load moment indicators and longitudinal load moment limiters |
| EN 894-1:1997+A1:2008 | Safety of machinery - Ergonomics requirements for the design of displays and control actuators - Part 1: General principles for human interactions with displays and control actuators |
Summarise
Sorry this product is not available in your region.