PREN 3314 : 200P2
Current
Current
The latest, up-to-date edition.
AEROSPACE SERIES - TITANIUM ALLOY TI-P64001 - SOLUTION TREATED AND AGED - BAR FOR MACHINING - D <= 75 MM
Available format(s)
Hardcopy , PDF
Language(s)
English
Published date
31-03-1994
$70.27
Including GST where applicable
0 Introduction
1 Scope
2 Normative references
Specifies the requirements relating to bar for machining, D <= 75 mm, solution treated and aged, in titanium alloy TI-P64001, for aerospace applications.
| Committee |
C5
|
| DocumentType |
Draft
|
| Pages |
5
|
| PublisherName |
Aerospace & Defence Industries Association of Europe
|
| Status |
Current
|
| Standards | Relationship |
| DIN EN 3314:1994-08 (Draft) | Identical |
| PREN 3244 : 200P2 | AEROSPACE SERIES - PIPE COUPLING 8 DEGREES 30 MINUTES IN TITANIUM ALLOY - UNIONS, DOUBLE ENDED |
| PREN 3084 : 200P1 | AEROSPACE SERIES - PIPE COUPLINGS 8 DEGREE 30 MINUTES IN TITANIUM ALLOY - UNIONS, LONG, WELDED, FOR REPAIR |
| PREN 3248 : 200P1 | AEROSPACE SERIES - PIPE COUPLING 8 DEGREES 30 MINUTES IN TITANIUM ALLOY - ADAPTERS, REDUCED PIPE END WITH LOCKING RING |
| PREN 3266 : 200P2 | AEROSPACE SERIES - PIPE COUPLING IN TITANIUM ALLOY - BULKHEAD NUTS |
| PREN 3246 : 200P2 | AEROSPACE SERIES - PIPE COUPLING 8 DEGREES 30 MINUTES IN TITANIUM ALLOY - UNIONS, BULKHEAD |
| PREN 4832 : DRAFT 2017 | AEROSPACE SERIES - ADAPTOR, PIPE COUPLING 24 DEGREES CONE UP TO 35000 KPA (5080 PSI) RING-LOCKED FITTING AND RING-LOCKED FITTING-REDUCER - INCH SERIES - TECHNICAL SPECIFICATION |
| PREN 3268 : 200P3 | AEROSPACE SERIES - PIPE COUPLING 8 DEGREES 30 MINUTES IN TITANIUM ALLOY - PRESSURE PLUGS |
| PREN 4022 : 200P1 | AEROSPACE SERIES - PIPE COUPLING 8 DEGREE 30' IN TITANIUM ALLOY - ELBOWS 90 DEGREE, BULKHEAD, WELDED |
| PREN 4193 : 200P1 | AEROSPACE SERIES - PIPE COUPLING 8 DEGREE 30' IN TITANIUM ALLOY - TEES, REDUCED, BULKHEAD LONG |
| PREN 4189 : 200P1 | AEROSPACE SERIES - PIPE COUPLING 8 DEGREE 30' IN TITANIUM ALLOY - TEES, BULKHEAD BRANCH, LONG |
| PREN 4194 : 200P1 | AEROSPACE SERIES - PIPE COUPLING 8 DEGREE 30' IN TITANIUM ALLOY - TEES, REDUCED, BULKHEAD |
| PREN 4025 : 200P2 | AEROSPACE SERIES - PIPE COUPLING 8 DEGREES 30 MINUTES IN TITANIUM ALLOY - ELBOWS 45 MINUTES, BULKHEAD |
| PREN 4192 : 200P1 | AEROSPACE SERIES - PIPE COUPLING 8 DEGREE 30' IN TITANIUM ALLOY - TEES, REDUCED, BULKHEAD BRANCH |
| PREN 4185 : 200P1 | AEROSPACE SERIES - PIPE COUPLING 8 DEGREE 30' IN TITANIUM ALLOY - TEES, BULKHEAD LONG |
| PREN 4027 : 200P1 | AEROSPACE SERIES - PIPE COUPLING 8 DEGREE 30' IN TITANIUM ALLOY - TEES, BRANCH WITH SWIVEL NUT |
| PREN 4026 : 200P1 | AEROSPACE SERIES - PIPE COUPLING 8 DEGREE 30' IN TITANIUM ALLOY - TEES |
| PREN 4020 : 200P2 | AEROSPACE SERIES - PIPE COUPLING 8 DEGREES 30 MINUTES IN TITANIUM ALLOY - ELBOWS 90 DEGREES, WELDED END WITH THRUST WIRE NUT |
| PREN 4021 : 200P1 | AEROSPACE SERIES - PIPE COUPLING 8 DEGREE 30' IN TITANIUM ALLOY - ELBOWS 90 DEGREE, BULKHEAD |
| PREN 4031 : 200P1 | AEROSPACE SERIES - PIPE COUPLING 8 DEGREE 30' IN TITANIUM ALLOY - NUTS FOR WELDED UNION |
| PREN 4186 : 200P1 | AEROSPACE SERIES - PIPE COUPLING 8 DEGREE 30' IN TITANIUM ALLOY - CROSS UNIONS |
| I.S. EN 4686:2014 | AEROSPACE SERIES - PIPE COUPLING 8 DEGREES 30' IN TITANIUM ALLOY - EQUIPPED BLIND FERRULES |
| 17/30356290 DC : 0 | BS ISO 22437 - AEROSPACE SERIES - PIPE COUPLING 8 DEGREES 30 MINUTES IN TITANIUM ALLOY - NUT FOR WELDED FERRULE |
| 09/30201406 DC : 0 | BS EN 4686 - AEROSPACE SERIES - PIPE COUPLING 8 DEGREES 30 MINUTES IN TITANIUM ALLOY - EQUIPPED BLIND FERRULES |
| 08/30195582 DC : 0 | BS EN 3264 - AEROSPACE SERIES - PIPE COUPLING 8 DEGREES 30 MINUTES IN TITANIUM ALLOY -THRUST WIRE NUTS |
| PREN 3081 : 200P1 | AEROSPACE SERIES - PIPE COUPLING 8 DEGREE 30 MINUTES IN TITANIUM ALLOY - FERRULES, WELDED WITH DYNAMIC BEAM SEAL END FOR REPAIR |
| PREN 3264 : 200P3 | AEROSPACE SERIES - PIPE COUPLING 8 DEGREES 30 MINUTES IN TITANIUM ALLOY - THRUST WIRE NUTS |
| PREN 3245 : 200P2 | AEROSPACE SERIES - PIPE COUPLING 8 DEGREES 30 MINUTES IN TITANIUM ALLOY - UNIONS, REDUCER |
| PREN 3080 : 200P1 | AEROSPACE SERIES - PIPE COUPLING 8 DEGREE 30 MINUTES IN TITANIUM ALLOY - TEES, REDUCED BRANCH WITH THRUST WIRE NUT |
| I.S. EN 4632-006:2013 | AEROSPACE SERIES - WELDABILITY AND BRAZEABILITY OF MATERIALS IN AEROSPACE CONSTRUCTIONS - PART 006: HOMOGENEOUS ASSEMBLIES OF TITANIUM ALLOYS |
| PREN 3566 : 200P1 | AEROSPACE SERIES - PIPE COUPLING 8 DEGREE 30 MINUTES IN TITANIUM ALLOY - ADAPTERS WITH LOCKING RING |
| PREN 4233 : 200P1 | AEROSPACE SERIES - PIPE COUPLING 8 DEGREES 30 MINUTES IN TITANIUM ALLOY - UNIONS, WELDED, THREADED |
| PREN 4029 : 200P1 | AEROSPACE SERIES - PIPE COUPLING 8 DEGREE 30' IN TITANIUM ALLOY - TEES BULKHEAD BRANCH |
| PREN 4028 : 200P1 | AEROSPACE SERIES - PIPE COUPLING 8 DEGREE 30' IN TITANIUM ALLOY - TEES, SWIVEL NUT ON RUN |
| ISO 8913:2006 | Aerospace — Lightweight polytetrafluoroethylene (PTFE) hose assemblies, classification 400 degrees F/3 000 psi (204 degrees C/20 684 kPa) and 204 degrees C/21 000 kPa (400 degrees F/3 046 psi) — Procurement specification |
| I.S. EN 3244:2002 | AEROSPACE SERIES - PIPE COUPLING 8 DEGREE 30 MINUTES IN TITANIUM ALLOY - UNIONS, DOUBLE ENDED |
| 06/30150692 DC : 0 | BS EN 4020 - AEROSPACE SERIES - PIPE COUPLING 8 DEGREE 30 MINUTES IN TITANIUM ALLOY - ELBOWS 90 DEGREE, SWIVEL NUT, WELDED |
| 09/30199092 DC : DRAFT JAN 2009 | BS EN 4025 - AEROSPACE SERIES - PIPE COUPLING 8 DEGREES 30 MINUTES IN TITANIUM ALLOY - ELBOWS 45 DEGREES, BULKHEAD |
| I.S. EN 4025:2010 | AEROSPACE SERIES - PIPE COUPLING 8 DEGREE 30 MINUTES IN TITANIUM ALLOY - ELBOWS 45 DEGREE, BULKHEAD |
| I.S. EN 3264:2010 | AEROSPACE SERIES - PIPE COUPLING 8 DEGREES 30 MINUTE IN TITANIUM ALLOY - THRUST WIRE NUTS |
| I.S. EN 4018:2009 | AEROSPACE SERIES - PIPE COUPLING 8 DEGREES 30 MINUTES IN TITANIUM ALLOY - ELBOWS 90 DEGREES WITH THRUST WIRE NUT |
| I.S. EN 4020:2009 | AEROSPACE SERIES - PIPE COUPLING 8 DEGREE 30 MINUTES IN TITANIUM ALLOY - ELBOWS 90 DEGREE, WELDED END WITH THRUST WIRE NUT |
| I.S. EN 4024:2009 | AEROSPACE SERIES - PIPE COUPLING 8 DEGREE 30 MINUTES IN TITANIUM ALLOY - ELBOWS 45 DEGREE WELDED END WITH THRUST WIRE NUT |
| I.S. EN 4023:2010 | AEROSPACE SERIES - PIPE COUPLING 8 DEGREE 30 MINUTES IN TITANIUM ALLOY - ELBOWS 45 DEGREE |
| I.S. EN 3268:2014 | AEROSPACE SERIES - PIPE COUPLING 8 DEGREE 30 MINUTES IN TITANIUM ALLOY - PRESSURE PLUGS |
| PREN 3083 : 200P1 | AEROSPACE SERIES - PIPE COUPLINGS 8 DEGREE 30 MINUTES IN TITANIUM ALLOY - UNIONS, BULKHEAD, LONG, WELDED, FOR REPAIR |
| PREN 3270 : 200P1 | AEROSPACE SERIES - PIPE COUPLING 8 DEGREES 30 MINUTES IN TITANIUM ALLOY - BLANKING PLUGS WITH LOCKING RING |
| PREN 3269 : 200P2 | AEROSPACE SERIES - PIPE COUPLING 8 DEGREES 30 MINUTES IN TITANIUM ALLOY - BLIND FERRULES WITH DYNAMIC BEAM SEAL END |
| PREN 3247 : 200P2 | AEROSPACE SERIES - PIPE COUPLING 8 DEGREES 30 MINUTES IN TITANIUM ALLOY - UNIONS, BULKHEAD, WELDED |
| PREN 3267 : 200P1 | AEROSPACE SERIES - WASHER, BULKHEAD IN TITANIUM ALLOY |
| PREN 3561 : 200P1 | AEROSPACE SERIES - PIPE COUPLING 8 DEGREE 30 MINUTES IN TITANIUM ALLOY - FERRULES WITH DYNAMIC BEAM SEAL END, WELDED AND REDUCED AT PIPE END |
| PREN 3690 : 200P1 | AEROSPACE SERIES - PIPE COUPLING 8 DEGREES 30 MINUTES IN TITANIUM ALLOY - UNIONS, BULKHEAD, LONG |
| 16/30340215 DC : 0 | BS EN 3264 - AEROSPACE SERIES - PIPE COUPLING 8 DEGREES 30 MINUTE IN TITANIUM ALLOY - THRUST WIRE NUTS |
| 14/30310863 DC : 0 | BS EN 4833 - AEROSPACE SERIES - PIPE COUPLING 24 DEGREE CONE UP TO 35000 KPA (5080 PSI) RING-LOCKED FITTING - FLARED END - INCH SERIES - WITH EXTRA FINE THREAD PITCH |
| 09/30199811 DC : 0 | BS EN 4632-006 - AEROSPACE SERIES - WELDED AND BRAZED ASSEMBLIES FOR AEROSPACE CONSTRUCTIONS - WELDABILITY AND BRAZEABILITY OF MATERIALS - PART 6: HOMOGENEOUS ASSEMBLIES TITANIUM ALLOYS |
| EN 4025:2010 | Aerospace series - Pipe coupling 8°30' in titanium alloy - Elbows 45°, bulkhead |
| PREN 3691 : 200P1 | AEROSPACE SERIES - PIPE COUPLING 8 DEGREES 30 MINUTES IN TITANIUM ALLOY - UNIONS, BULKHEAD, LONG, WELDED |
| PREN 4188 : 200P1 | AEROSPACE SERIES - PIPE COUPLING 8 DEGREE 30' IN TITANIUM ALLOY - ELBOWS 90 DEGREE, BULKHEAD, LONG, WELDED |
| PREN 4686 : 200P1 | AEROSPACE SERIES - PIPE COUPLING 8 DEGREES 30 MINUTES IN TITANIUM ALLOY - EQUIPPED BLIND FERRULES |
| PREN 4018 : 200P2 | AEROSPACE SERIES - PIPE COUPLING 8 DEGREES 30 MINUTES IN TITANIUM ALLOY - ELBOWS 90 DEGREES WITH THRUST WIRE NUT |
| PREN 4191 : 200P1 | AEROSPACE SERIES - PIPE COUPLING 8 DEGREE 30' IN TITANIUM ALLOY - TEES, REDUCED, BULKHEAD BRANCH, LONG |
| PREN 4183 : 200P1 | AEROSPACE SERIES - PIPE COUPLING 8 DEGREE 30' IN TITANIUM ALLOY - ELBOWS 90 DEGREE, DOUBLE, WELDED |
| PREN 4187 : 200P1 | AEROSPACE SERIES - PIPE COUPLING 8 DEGREE 30' IN TITANIUM ALLOY - ELBOWS 90 DEGREE, BULKHEAD, LONG |
| BS EN 3080:2006 | Aerospace series. Pipe coupling 8°30\' in titanium alloy. Tees, reduced, branch with thrust wire nut |
| 09/30201403 DC : 0 | BS EN 3268 - AEROSPACE SERIES - PIPE COUPLING 8 DEGREES 30 MINUTES IN TITANIUM ALLOY - PRESSURE PLUGS |
| 06/30150689 DC : 0 | BS EN 4018 - AEROSPACE SERIES - PIPE COUPLING 8 DEGREE 30 MINUTES IN TITANIUM ALLOY - ELBOWS 90 DEGREE, SWIVEL NUT |
| BS EN 4025:2010 | Aerospace series. Pipe coupling 8°30\' in titanium alloy. Elbows 45°, bulkhead |
| BS EN 4686:2014 | Aerospace series. Pipe coupling 8°30\' in titanium alloy. Equipped blind ferrules |
| BS EN 4020:2009 | Aerospace series. Pipe coupling 8°30\' in titanium alloy. Elbows 90°, welded end with thrust wire nut |
| BS EN 4632-006:2013 | Aerospace series. Weldability and brazeability of materials in aerospace constructions Homogeneous assemblies of titanium alloys |
| BS EN 4024:2009 | Aerospace series. Pipe coupling 8°30\' in titanium alloy. Elbows 45° welded end with thrust wire nut |
| BS ISO 22437:2018 | Aerospace series. Pipe coupling 8°30 in titanium alloy. Nut for welded ferrule |
| 09/30199080 DC : DRAFT JAN 2009 | BS EN 4023 - AEROSPACE SERIES - PIPE COUPLING 8 DEGREE 30 MINUTES IN TITANIUM ALLOY - ELBOWS 45 DEGREE |
| BS EN 3264:2010 | Aerospace series. Pipe coupling 8°30\' in titanium alloy. Thrust wire nuts |
| BS EN 4023:2010 | Aerospace series. Pipe coupling 8°30\' in titanium alloy. Elbows 45° |
| 14/30310866 DC : 0 | BS EN 4836 - AEROSPACE SERIES - ADAPTOR, PIPE COUPLING 24 DEGREE CONE UP TO 35000 KPA (5080 PSI) RING-LOCKED FITTING REDUCER- FLARED END - WITH EXTRA FINE THREAD PITCH - INCH SERIES |
| 09/30199116 DC : DRAFT JAN 2009 | BS EN 4184 - AEROSPACE SERIES - PIPE COUPLING 8 DEGREES 30 MINUTES IN TITANIUM ALLOY - ELBOWS 45 DEGREE, WELDED ENDS, DOUBLE |
| BS EN 4018:2009 | Aerospace series. Pipe coupling 8°30\' in titanium alloy. Elbows 90° with thrust wire nut |
| BS EN 3268:2014 | Aerospace series. Pipe coupling 8°30\' in titanium alloy. Pressure plugs |
| EN 4632-006:2013 | Aerospace series - Weldability and brazeability of materials in aerospace constructions - Part 006: Homogeneous assemblies of titanium alloys |
| EN 4182:2001 | Aerospace series - Pipe coupling 8°30' in titanium alloy - Tees, reduced |
| EN 3246:2001 | Aerospace series - Pipe coupling 8°30' in titanium alloy - Unions, straight, bulkhead |
| EN 3264:2010 | Aerospace series - Pipe coupling 8°30' in titanium alloy - Thrust wire nuts |
| EN 4019:2001 | Aerospace series - Pipe coupling 8°30' in titanium alloy - Elbows 90° welded end |
| EN 4185:2001 | Aerospace series - Pipe coupling 8°30' in titanium alloy - Tees bulkhead on run long |
| EN 3243:2001 | Aerospace series - Pipe coupling 8°30' in titanium alloy - Ferrules, welded, with dynamic beam seal end |
| EN 3266:2001 | Aerospace series - Pipe coupling in titanium alloy - Bulkhead nuts |
| EN 4024:2009 | Aerospace series - Pipe coupling 8°30' in titanium alloy - Elbows 45° welded end with thrust wire nut |
| EN 3244:2001 | Aerospace series - Pipe coupling 8°30' in titanium alloy - Unions, straight |
| EN 4187:2001 | Aerospace series - Pipe coupling 8°30' in titanium alloy - Elbows 90° bulkhead, long |
| EN 4028:2001 | Aerospace series - Pipe coupling 8°30' in titanium alloy - Tees with thrust wire nut on run |
| EN 4017:2001 | Aerospace series - Pipe coupling 8°30' in titanium alloy - Elbows 90° |
| EN 4030:2001 | Aerospace series - Pipe coupling 8°30' in titanium alloy - Tees bulkhead on run |
| EN 3268:2014 | Aerospace series - Pipe coupling 8°30' in titanium alloy - Pressure plugs |
| EN 4023:2010 | Aerospace series - Pipe coupling 8°30' in titanium alloy - Elbows 45° |
| EN 4021:2001 | Aerospace series - Pipe coupling 8°30' in titanium alloy - Elbows 90°, bulkhead |
| EN 3269:2001 | Aerospace series - Pipe coupling 8°30' in titanium alloy - Ferrules, blind, with dynamic beam seal end |
| EN 4026:2001 | Aerospace series - Pipe coupling 8°30' in titanium alloy - Tees |
| EN 3248:2001 | Aerospace series - Pipe coupling 8°30' in titanium alloy - Adaptors, reduced pipe end, with lockring |
| EN 4190:2001 | Aerospace series - Pipe coupling 8°30' in titanium alloy - Tees, reduced with thrust wire nut on run |
| EN 3245:2001 | Aerospace series - Pipe coupling 8°30' in titanium alloy - Unions, straight, reducer |
| EN 3247:2001 | Aerospace series - Pipe coupling 8°30' in titanium alloy - Unions, bulkhead, welded end |
| EN 3267:2001 | Aerospace series - Washers, bulkhead, in titanium alloy |
| EN 3081:2001 | Aerospace series - Pipe coupling 8°30' in titanium alloy - Ferrules, welded with dynamic beam seal end, for repair |
| EN 3080:2006 | Aerospace series - Pipe coupling 8°30' in titanium alloy - Tees, reduced, branch with thrust wire nut |
| EN 4029:2001 | Aerospace series - Pipe coupling 8°30' in titanium alloy - Tees bulkhead branch |
| EN 4184:2001 | Aerospace series - Pipe coupling 8°30' in titanium alloy - Elbows 45° double, welded ends |
| EN 4022:2001 | Aerospace series - Pipe coupling 8°30' in titanium alloy - Elbows 90° bulkhead, welded end |
| EN 4183:2001 | Aerospace series - Pipe coupling 8°30' in titanium alloy - Elbows 90° welded ends |
| EN 4186:2001 | Aerospace series - Pipe coupling 8°30' in titanium alloy - Unions, cross |
| EN 4027:2001 | Aerospace series - Pipe coupling 8°30' in titanium alloy - Tees branch with thrust wire nut |
| EN 4031:2001 | Aerospace series - Pipe coupling 8°30' in titanium alloy - Nut for welded ferrule |
| EN 4020:2009 | Aerospace series - Pipe coupling 8°30' in titanium alloy - Elbows 90°, welded end with thrust wire nut |
| EN 4018:2009 | Aerospace series - Pipe coupling 8°30' in titanium alloy - Elbows 90° with thrust wire nut |
| EN 4686:2014 | Aerospace series - Pipe coupling 8°30' in titanium alloy - Equipped blind ferrules |
| PREN 4833 : DRAFT 2017 | AEROSPACE SERIES - PIPE COUPLING 24 DEGREES CONE UP TO 35000 KPA (5080 PSI) RING LOCKED FITTING - FLARELESS END - INCH SERIES - EXTRA FINE THREAD PITCH |
| PREN 4836 : DRAFT 2017 | AEROSPACE SERIES - ADAPTOR, PIPE COUPLING 24 DEGREES CONE UP TO 35000 KPA (5080 PSI) RING-LOCKED FITTING REDUCER - FLARELESS END - INCH SERIES - EXTRA FINE THREAD PITCH |
| PREN 3082 : 200P1 | AEROSPACE SERIES - PIPE COUPLINGS 8 DEGREE 30 MINUTES IN TITANIUM ALLOY - UNIONS, BULKHEAD, WITH WELD END, FOR REPAIR |
| PREN 4610 : 200P1 | AEROSPACE SERIES - PIPE COUPLING 8 DEGREES 30 MINUTES IN TITANIUM ALLOY ELBOW 45 DEGREES, WITH THRUST WIRE NUT |
| PREN 3688 : 200P1 | AEROSPACE SERIES - T-RING FILLERS IN TITANIUM ALLOY FOR WELDING PIPES - 14000 KPA NOMINAL PRESSURE |
| PREN 4184 : 200P1 | AEROSPACE SERIES - PIPE COUPLING 8 DEGREE 30' IN TITANIUM ALLOY - ELBOWS 45 DEGREE, DOUBLE, WELDED |
| PREN 4182 : 200P1 | PIPE COUPLING 8 DEGREE 30' IN TITANIUM ALLOY - TEE, REDUCED |
| PREN 4030 : 200P1 | AEROSPACE SERIES - PIPE COUPLING 8 DEGREE 30' IN TITANIUM ALLOY - TEES, BULKHEAD RUN |
| PREN 4190 : 200P1 | AEROSPACE SERIES - PIPE COUPLING 8 DEGREE 30' IN TITANIUM ALLOY - TEES, REDUCED, WITH SWIVEL NUT ON RUN |
| PREN 4632-006 : DRAFT 2008 | WELDED AND BRAZED ASSEMBLIES FOR AEROSPACE CONSTRUCTIONS - WELDABILITY AND BRAZEABILITY OF MATERIALS - PART 006: HOMOGENEOUS ASSEMBLIES TITANIUM ALLOYS |
| PREN 4019 : 200P1 | AEROSPACE SERIES - PIPE COUPLING 8 DEGREE 30' IN TITANIUM ALLOY - ELBOWS 90 DEGREE, WELDED |
| PREN 4017 : 200P1 | AEROSPACE SERIES - PIPE COUPLING 8 DEGREE 30' IN TITANIUM ALLOY - ELBOWS 90 DEGREE |
| PREN 3689 : 200P1 | AEROSPACE SERIES - T-RING FILLERS IN TITANIUM ALLOY FOR WELDING PIPES - 28000 KPA NOMINAL PRESSURE |
| PREN 4023 : 200P2 | AEROSPACE SERIES - PIPE COUPLING 8 DEGREES 30 MINUTES IN TITANIUM ALLOY - ELBOWS 45 DEGREES |
| PREN 4024 : 200P2 | AEROSPACE SERIES - PIPE COUPLING 8 DEGREE 30' IN TITANIUM ALLOY - ELBOWS 45 DEGREE WELDED END WITH THRUST WIRE NUT |
| DIN EN 4233:2002-08 | AEROSPACE SERIES - PIPE COUPLING 8 DEGREE 30 MINUTES IN TITANIUM ALLOY - UNIONS, WELDED, THREADED |
| BS ISO 8913:2006 | Aerospace. Lightweight polytetrafluoroethylene (PTFE) hose assemblies, classification 400°F/3000 psi (204°C/20684 kPa) and 204°C/21000 kPa (400°F/3046 psi). Procurement specification |
| 06/30150695 DC : 0 | BS EN 4022 - AEROSPACE SERIES - PIPE COUPLING 8 DEGREE 30 MINUTES IN TITANIUM ALLOY - ELBOWS 45 DEGREE, SWIVEL NUT, WELDED |
| I.S. EN 3561:2002 | AEROSPACE SERIES - PIPE COUPLING 8 DEGREES 30 MINUTES IN TITANIUM ALLOY - FERRULES WITH DYNAMIC BEAM SEAL END, WELDED AND REDUCED AT PIPE END |
| PREN 2500/4 : 200P3 | AEROSPACE SERIES - INSTRUCTIONS FOR THE DRAFTING AND USE OF METALLIC MATERIAL STANDARDS - PART 4: SPECIFIC REQUIREMENTS FOR TITANIUM AND TITANIUM ALLOYS |
| PREN 3114-2 : 200P1 | AEROSPACE SERIES - TEST METHOD - MICROSTRUCTURE OF (ALPHA + BETA) TITANIUM ALLOY WROUGHT PRODUCTS - PART 2: MICROSTRUCTURE OF BARS, SECTIONS, FORGING STOCK AND FORGINGS |
| PREN 2600 : 200P1 | AEROSPACE SERIES - DESIGNATION OF METALLIC SEMI-FINISHED PRODUCTS - RULES |
| PREN 3544-3 : 200P1 | AEROSPACE SERIES - TITANIUM AND TITANIUM ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 3: BAR AND SECTION |
| PREN 2340 : 2 | AEROSPACE SERIES - ROUND BARS TITANIUM AND TITANIUM ALLOYS - DIAMETER 12 MM <= D <= 80 MM - DIMENSIONS |
| PREN 3544-1 : 200P1 | AEROSPACE SERIES - TITANIUM AND TITANIUM ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 1: GENERAL REQUIREMENTS |
Summarise
$70.27
Including GST where applicable
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.