SAE J300_201501
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Engine Oil Viscosity Classification
Available format(s)
Hardcopy , PDF
Language(s)
English
Published date
20-01-2015
Publisher
Superseded date
28-06-2021
Superseded by
$185.02
Including GST where applicable
1. SCOPE
2. REFERENCES
3. SIGNIFICANCE AND USE
4. LOW-TEMPERATURE TEST METHODS
5. HIGH-TEMPERATURE TEST METHODS
6. LABELING
7. NOTES
APPENDIX A
This SAE Standard defines the limits for a classification of engine lubricating oils in rheological terms only.
| DocumentType |
Standard
|
| Pages |
9
|
| PublisherName |
SAE International
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
This SAE Standard defines the limits for a classification of engine lubricating oils in rheological terms only. Other oil characteristics are not considered or included.
| MIL-L-46152 Revision E:1990 | Lubricating Oil, Internal Combustion Engine, Administrative Service (S/S by A-A-52039) |
| ISO 5165:2017 | Petroleum products — Determination of the ignition quality of diesel fuels — Cetane engine method |
| ASTM D 2422 : 1997 : R2013 | Standard Classification of Industrial Fluid Lubricants by Viscosity System |
| ISO 4548-14:2016 | Methods of test for full-flow lubricating oil filters for internal combustion engines — Part 14: Cold start simulation and hydraulic pulse durability for composite filter housings |
| NACE MR 01 74 : 2007 | SELECTING INHIBITORS FOR USE AS SUCKER-ROD THREAD LUBRICANTS |
| MIL-HDBK-113 Revision C:1989 | Guide for the Selection of Lubricants, Functional Fluids, Preservatives and Speciality Products for use in Ground Equipment Systems |
| MIL-PRF-32584 Base Document:2017 | Deck Covering Materials, Monolithic |
| MIL L 21260 : D | LUBRICATING OIL, INTERNAL COMBUSTION ENGINE, PRESERVATIVE AND BREAK IN |
| ISO 4548-7:2012 | Methods of test for full-flow lubricating oil filters for internal combustion engines — Part 7: Vibration fatigue test |
| BS 7403-1:1998 | Full-flow lubricating oil filters for internal combustion engines Methods of test for differential pressure/flow characteristics |
| MIL PRF 002104 : L | LUBRICATING OIL, INTERNAL COMBUSTION ENGINE, COMBAT/TACTICAL SERVICE |
| ASTM D 2422 : 1997 : R2007 | Standard Classification of Industrial Fluid Lubricants by Viscosity System |
| API 1509 : 2002 | ENGINE OIL LICENSING AND CERTIFICATION SYSTEM |
| ASTM D 2422 : 1997 | Standard Classification of Industrial Fluid Lubricants by Viscosity System |
| MIL-PRF-71229 Revision D:2011 | Mount, Gun, 120MM |
| BS ISO 4548-15:2014 | Methods of test for full-flow lubricating oil filters for internal combustion engines Vibration fatigue test for composite filter housings |
| BS 7403-4:1998 | Full-flow lubricating oil filters for internal combustion engines Methods of test for initial particle retention efficiency, life and cumulative efficiency (gravimetric method) |
| A-A-52306 Revision A:1995 | Lubricating Oil, Heavy-Duty Diesel Engine (S/S by SAE-J2363) |
| 07/30149374 DC : 0 | BS EN 15673-1 - DETERMINATION OF SLIP RESISTANCE OF PEDESTRIAN SURFACES - METHOD OF EVALUATION - PART 1: REFERENCE METHOD |
| 14/30279043 DC : 0 | BS ISO 4548-14 - METHODS OF TEST FOR FULL-FLOW LUBRICATING OIL FILTERS FOR INTERNAL COMBUSTION ENGINES - PART 14: COLD START SIMULATION AND HYDRAULIC PULSE DURABILITY FOR COMPOSITE FILTER HOUSINGS |
| BS 7403-2:1998 | Full-flow lubricating oil filters for internal combustion engines Method of test for element by-pass valve characteristics |
| BS ISO 4548-7:2012 | Methods of test for full-flow lubricating oil filters for internal combustion engines Vibration fatigue test |
| 12/30241609 DC : 0 | BS ISO 4548-15 - METHODS OF TEST FOR FULL-FLOW LUBRICATING OIL FILTERS FOR INTERNAL COMBUSTION ENGINES - PART 15: VIBRATION FATIGUE TEST WITH COMPOSITE MATERIALS |
| S.R. CEN/TS 16165:2016 | DETERMINATION OF SLIP RESISTANCE OF PEDESTRIAN SURFACES - METHODS OF EVALUATION |
| 12/30171803 DC : 0 | BS ISO 4548-5 - FULL-FLOW LUBRICATING OIL FILTERS FOR INTERNAL COMBUSTION ENGINES - PART 5: METHOD OF TEST FOR COLD START SIMULATION AND HYDRAULIC PULSE DURABILITY |
| SAE AMS2631E | Ultrasonic Inspection Titanium and Titanium Alloy Bar, Billet and Plate |
| SAE J2359_199811 | Lubricating Oil, Internal Combustion Engine, Military Combat/Tactical Service |
| SAE J1423_201502 | Classification of Energy Conserving Engine Oil and Resource Conserving Engine Oil for Passenger Cars, Vans, Sport Utility Vehicles, and Light-Duty Trucks |
| SAE J183_201708 | Engine Oil Performance and Engine Service Classification (Other than \"Energy Conserving\") |
| 11/30218514 DC : 0 | BS ISO 4548-7 - METHODS OF TEST FOR FULL-FLOW LUBRICATING OIL FILTERS FOR INTERNAL COMBUSTION ENGINES - PART 7: VIBRATION FATIGUE TEST |
| MIL-L-6082 Revision E:1990 | Lubricating Oil, Aircraft Piston Engine (Non-Dispersant Mineral Oil) (S/S by SAE-J1966) |
| MIL-PRF-32049 Base Document:1999 | Pallet, Field Artillery Projectile |
| MIL-PRF-21260 Revision E:1998 | Lubricating Oil, Internal Combustion Engine, Preservative Break-in |
| BS 7403-5:1991 | Full-flow lubricating oil filters for internal combustion engines Method of test for cold start simulation and hydraulic pulse durability |
| BS 7403-3:1998 | Full-flow lubricating oil filters for internal combustion engines Methods of test for resistance to high differential pressure and to elevated temperature |
| MIL-PRF-2104 Revision K:2016 | Lubricating Oil, Internal Combustion Engine, Combat/Tactical Service |
| EN ISO 5165:2018 | Petroleum products - Determination of the ignition quality of diesel fuels - Cetane engine method (ISO 5165:2017) |
| SAE J2361_199811 | Lubricating Oil, Internal Combustion Engine, Preservation Break-In |
| I.S. EN ISO 5165:1998 | PETROLEUM PRODUCTS - DETERMINATION OF THE IGNITION QUALITY OF DIESEL FUELS - CETANE ENGINE METHOD (ISO 5165:2017) |
| SAE AMS2633D | Ultrasonic Inspection Centrifugally-Cast, Corrosion-Resistant Steel Tubular Cylinders |
| ISO 18436-5:2012 | Condition monitoring and diagnostics of machines — Requirements for qualification and assessment of personnel — Part 5: Lubricant laboratory technician/analyst |
| ISO 4548-5:2013 | Methods of test for full-flow lubricating oil filters for internal combustion engines — Part 5: Test for cold start simulation and hydraulic pulse durability |
| BS ISO 18436-5:2012 | Condition monitoring and diagnostics of machines. Requirements for qualification and assessment of personnel Lubricant laboratory technician/analyst |
| BS 7403-7:1991 | Full-flow lubricating oil filters for internal combustion engines Method of test for vibration fatigue |
| MIL-L-22851 Revision D:1990 | Lubricating Oil, Aircraft Piston Engine (Ashless Dispersant) (S/S by SAE-J1899) |
| DIN 51130:2014-02 | Testing of floor coverings - Determination of the anti-slip property - Workrooms and fields of activities with slip danger - Walking method - Ramp test |
| ASTM D 7932 : 2017 | Standard Specification for Printed, Pressure-Sensitive Adhesive Labels for Use in Extreme Distribution Environments |
| BS ISO 4548-14:2016 | Methods of test for full-flow lubricating oil filters for internal combustion engines Cold start simulation and hydraulic pulse durability for composite filter housings |
| BS ISO 4548-5:2013 | Methods of test for full-flow lubricating oil filters for internal combustion engines Test for cold start simulation and hydraulic pulse durability |
| API 1525A : 1ED 2012 | BULK ENGINE OIL CHAIN OF CUSTODY AND QUALITY DOCUMENTATION |
| SAE AMS2632A | Inspection, Ultrasonic, of Thin Materials 0.50 Inch (12.7 mm) and Under in Cross-Sectional Thickness |
| MIL L 2104 : F | LUBRICATING OIL, INTERNAL COMBUSTION ENGINE, COMBAT TACTICAL SERVICE |
| STANAG 2410 : 1989 | LIST OF NATO CIVIL/MILITARY GROUND ENGINE LUBRICATING OIL INTERCHANGEABILITY |
| SAE J2438_199812 | Low-Temperature Cranking Load Requirements of an Engine—Air Starter Method |
| ASTM D 471 : 2016-02 | TEST METHOD FOR RUBBER PROPERTY - EFFECT OF LIQUIDS |
| SAE J357_201601 | Physical and Chemical Properties of Engine Oils |
| ISO 4548-15:2014 | Methods of test for full-flow lubricating oil filters for internal combustion engines — Part 15: Vibration fatigue test for composite filter housings |
| ASTM D 2422 : 1997 : R2002 | Standard Classification of Industrial Fluid Lubricants by Viscosity System |
| CEN/TS 16165:2016 | Determination of slip resistance of pedestrian surfaces - Methods of evaluation |
| SAE J1899_202010 | Lubricating Oil, Aircraft Piston Engine (Ashless Dispersant) |
| SAE J1510_200111 | Lubricants for Two-Stroke-Cycle Gasoline Engines |
| ASTM D 3244 : 2016-06 | PRACTICE FOR UTILIZATION OF TEST DATA TO DETERMINE CONFORMANCE WITH SPECIFICATIONS |
| ASTM D 5133 : 2015 : REDLINE | Standard Test Method for Low Temperature, Low Shear Rate, Viscosity/Temperature Dependence of Lubricating Oils Using a Temperature-Scanning Technique |
| ASTM D 5481 : 2013 : REDLINE | Standard Test Method for Measuring Apparent Viscosity at High-Temperature and High-Shear Rate by Multicell Capillary Viscometer |
| ASTM D 4683 : 2017 : REDLINE | Standard Test Method for Measuring Viscosity of New and Used Engine Oils at High Shear Rate and High Temperature by Tapered Bearing Simulator Viscometer at 150 °C |
| SAE J1536_200612 | Two-Stroke-Cycle Engine Oil Fluidity/Miscibility Classification |
Summarise
$185.02
Including GST where applicable
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.