VDI 2057 Blatt 2:2016-03
Current
The latest, up-to-date edition.
Human exposure to mechanical vibrations - Hand-arm vibration
Hardcopy , PDF
German - English
01-03-2016
Preliminary note
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Symbols and indices
5 Fundamentals
6 Frequency weighting and formation
of the assessment quantities
7 Measurement and assessment
8 Assessment
Annex A - Using existing measured values for
retrospective assessment
Annex B - Detailed documentation of the vibration
measurements
Annex C - Vibration exposure and chronic diseases
of the hand-arm system
Annex D - Proposal for an additional more
differentiated assessment of the vibration
exposure for estimating an increased risk
of bone and joint changes in the hand-arm
system or of circulation and
nerve function disorders of the hands
Annex E - Coupling devices for vibration
sensors on handles and gripping
surfaces
Bibliography
The Guideline provides a compilation of general guidance for the determination of hand-arm vibration exposure and describes a uniform procedure for assessing this vibration exposure.
| DevelopmentNote |
Supersedes VDI 2057-3:1987. (06/2006)
|
| DocumentType |
Standard
|
| Pages |
44
|
| PublisherName |
Verlag des Vereins Deutscher Ingenieure
|
| Status |
Current
|
| Supersedes |
| CEN/TR 15350:2013 | Mechanical vibration - Guideline for the assessment of exposure to hand-transmitted vibration using available information including that provided by manufacturers of machinery |
| VDI 4085:2017-04 | Planning, construction and managing of scrapyards - Facilities and equipment for the handling, storage and treatment of scraps and other materials |
| VDI 3831:2012-04 | Protective measures against vibration effects on man |
| VDI 2057 Blatt 3:2017-03 | Human exposure to mechanical vibration - Whole-body vibration at workplaces in buildings |
| VDI 2057-1 : 2017 COR 1 2017 | HUMAN EXPOSURE TO MECHANICAL VIBRATIONS - WHOLE-BODY VIBRATION |
| VDI 2062 Blatt 1:2011-05 | Vibration insulation - Terms and methods |
| VDI 4087:2016-12 | Planning, construction and managing of scrap wood yards |
| PD CEN/TR 15350:2013 | Mechanical vibration. Guideline for the assessment of exposure to hand-transmitted vibration using available information including that provided by manufacturers of machinery |
| UNE-CEN/TR 15350:2013 IN | Mechanical vibration - Guideline for the assessment of exposure to hand-transmitted vibration using available information including that provided by manufacturers of machinery |
| DIN 13230-5:1998-01 | AIRCRAFT FOR PATIENT TRANSPORT - PART 5: REQUIREMENTS ON INTENSIVE CARE AIRCRAFTS (ITF) |
| S.R. CEN/TR 15350:2013 | MECHANICAL VIBRATION - GUIDELINE FOR THE ASSESSMENT OF EXPOSURE TO HAND-TRANSMITTED VIBRATION USING AVAILABLE INFORMATION INCLUDING THAT PROVIDED BY MANUFACTURERS OF MACHINERY |
| I.S. CEN TR 15350:2006 | MECHANICAL VIBRATION - GUIDELINE FOR THE ASSESSMENT OF EXPOSURE TO HAND-TRANSMITTED VIBRATION USING AVAILABLE INFORMATION INCLUDING THAT PROVIDED BY MANUFACTURERS OF MACHINERY |
| ISO 2631:1978 | Guide for the evaluation of human exposure to whole-body vibration |
| EN 12096:1997 | Mechanical vibration - Declaration and verification of vibration emission values |
| ISO 22867:2011 | Forestry and gardening machinery — Vibration test code for portable hand-held machines with internal combustion engine — Vibration at the handles |
| ISO 19432:2012 | Building construction machinery and equipment — Portable, hand-held, internal combustion engine driven cut-off machines — Safety requirements |
| ISO 5349-2:2001 | Mechanical vibration — Measurement and evaluation of human exposure to hand-transmitted vibration — Part 2: Practical guidance for measurement at the workplace |
| DIN EN ISO 22867:2012-04 | Forestry and gardening machinery - Vibration test code for portable hand-held machines with internal combustion engine - Vibration at the handles (ISO 22867:2011) |
| CR 12349:1996 | Mechanical vibration - Guide to the health effects of vibration on the human body |
| DIN EN ISO 5349-2:2015-12 | MECHANICAL VIBRATION - MEASUREMENT AND EVALUATION OF HUMAN EXPOSURE TO HAND-TRANSMITTED VIBRATION - PART 2: PRACTICAL GUIDANCE FOR MEASUREMENT AT THE WORKPLACE (ISO 5349-2:2001 + AMD 1:2015) |
| EN ISO 22867:2011 | Forestry and gardening machinery - Vibration test code for portable hand-held machines with internal combustion engine - Vibration at the handles (ISO 22867:2011) |
| EN ISO 26800:2011 | Ergonomics - General approach, principles and concepts (ISO 26800:2011) |
| ISO 26800:2011 | Ergonomics — General approach, principles and concepts |
| DIN CEN/TR 15350;DIN SPEC 45694:2013-12 | Mechanical vibration - Guideline for the assessment of exposure to hand-transmitted vibration using available information including that provided by manufacturers of machinery; German version CEN/TR 15350:2013 |
| DIN EN ISO 26800:2011-11 | Ergonomics - General approach, principles and concepts (ISO 26800:2011); German version EN ISO 26800:2011 |
| DIN EN ISO 5349-1:2001-12 | MECHANICAL VIBRATIONS - MEASUREMENT AND EVALUATION OF HUMAN EXPOSURE TO HAND-TRANSMITTED VIBRATION - PART 1: GENERAL REQUIREMENTS |
| DIN ISO/TS 15694:2004-07 | Mechanical vibration and shock - Measurement and evaluation of single shocks transmitted from hand-held and hand-guided machines to the hand-arm system (ISO/TS 15694:2004); German version CEN ISO/TS 15694:2004 |
| DIN CEN/TR 15350 : 2013 | MECHANICAL VIBRATION - GUIDELINE FOR THE ASSESSMENT OF EXPOSURE TO HAND-TRANSMITTED VIBRATION USING AVAILABLE INFORMATION INCLUDING THAT PROVIDED BY MANUFACTURERS OF MACHINERY |
| VDI 1000:2017-02 | VDI Standardisation Work - Principles and procedures |
| CEN/TR 16391:2012 | Mechanical vibration and shock - Hand-transmitted vibration - Influence of coupling forces at the hand-machine interface on exposure evaluation |
| EN ISO 5349-1:2001 | Mechanical vibration - Measurement and evaluation of human exposure to hand-transmitted vibration - Part 1: General requirements (ISO 5349-1:2001) |
| VDI 2057 Blatt 3:2017-03 | Human exposure to mechanical vibration - Whole-body vibration at workplaces in buildings |
| EN ISO 6385:2016 | Ergonomics principles in the design of work systems (ISO 6385:2016) |
| ISO 8041:2005 | Human response to vibration — Measuring instrumentation |
| EN ISO 19432:2012 | Building construction machinery and equipment - Portable, hand-held, internal combustion engine driven cut-off machines - Safety requirements (ISO 19432:2012) |
| VDI 2057-1 : 2017 COR 1 2017 | HUMAN EXPOSURE TO MECHANICAL VIBRATIONS - WHOLE-BODY VIBRATION |
| ISO 5349-1:2001 | Mechanical vibration — Measurement and evaluation of human exposure to hand-transmitted vibration — Part 1: General requirements |
| ISO 6385:2016 | Ergonomics principles in the design of work systems |
| DIN 45661:2016-03 | VIBRATION MEASURING INSTRUMENTATION - VOCABULARY |
| DIN EN ISO 19432:2012-12 | BUILDING CONSTRUCTION MACHINERY AND EQUIPMENT - PORTABLE, HAND-HELD, INTERNAL COMBUSTION ENGINE DRIVEN CUT-OFF MACHINES - SAFETY REQUIREMENTS (ISO 19432:2012) |
| ISO 15230:2007 | Mechanical vibration and shock — Coupling forces at the man—machine interface for hand-transmitted vibration |
| DIN EN ISO 20643:2012-10 | Mechanical vibration - Hand-held and hand-guided machinery - Principles for evaluation of vibration emission (ISO 20643:2005 + Amd. 1:2012) (includes Amendment :2012) |
| ISO/TS 15694:2004 | Mechanical vibration and shock — Measurement and evaluation of single shocks transmitted from hand-held and hand-guided machines to the hand-arm system |
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.