09/30205299 DC : 0
Current
The latest, up-to-date edition.
BS EN 4688 - AEROSPACE SERIES - PAINTS AND VARNISHES - CORROSION RESISTANT CHROMATED TWO COMPONENT COLD CURING EPOXY PRIMER - HIGH CORROSION RESISTANCE FOR MILITARY APPLICATION
Hardcopy , PDF
English
0 INTRODUCTION
1 SCOPE
2 NORMATIVE REFERENCES
3 DEFINITIONS
4 CLASSIFICATION
5 BATCH RELEASE AND QUALIFICATION TESTING
6 Designation
7 Requirements for fibre reinforced composites
BS EN 4688
Committee |
ACE/65
|
DocumentType |
Draft
|
Pages |
22
|
PublisherName |
British Standards Institution
|
Status |
Current
|
Standards | Relationship |
PREN 4688 : 200P1 | Identical |
ISO 7724-1:1984 | Paints and varnishes Colorimetry Part 1: Principles |
ISO 2811-1:2016 | Paints and varnishes — Determination of density — Part 1: Pycnometer method |
EN 2334 : 1997 | AEROSPACE SERIES - CHROMIC-SULPHURIC ACID PICKLE OF ALUMINIUM AND ALUMINIUM ALLOYS |
ISO 2812-2:2007 | Paints and varnishes Determination of resistance to liquids Part 2: Water immersion method |
PREN 2379 : 200P1 | AEROSPACE SERIES - FLUIDS FOR ASSESSMENT OF NON-METALLIC MATERIALS |
PREN 3847 : 200P2 | AEROSPACE SERIES - PAINTS AND VARNISHES - DETERMINATION OF SEDIMENTATION RATING |
EN 3212 : 1995 | AEROSPACE SERIES - PAINTS AND VARNISHES - CORROSION TEST BY ALTERNATE IMMERSION IN A BUFFERED CHLORIDE SOLUTION |
ISO 2811-3:2011 | Paints and varnishes — Determination of density — Part 3: Oscillation method |
ISO 3675:1998 | Crude petroleum and liquid petroleum products Laboratory determination of density Hydrometer method |
ISO 4623-2:2016 | Paints and varnishes Determination of resistance to filiform corrosion Part 2: Aluminium substrates |
ISO 6270-1:1998 | Paints and varnishes Determination of resistance to humidity Part 1: Continuous condensation |
ISO 1520:2006 | Paints and varnishes Cupping test |
ISO 7724-2:1984 | Paints and varnishes Colorimetry Part 2: Colour measurement |
ISO 4628-8:2012 | Paints and varnishes — Evaluation of degradation of coatings — Designation of quantity and size of defects, and of intensity of uniform changes in appearance — Part 8: Assessment of degree of delamination and corrosion around a scribe or other artificial defect |
ISO 3678:1976 | Paints and varnishes — Print-free test |
ISO 9117:1990 | Paints and varnishes — Determination of through-dry state and through-dry time — Method of test |
EN 2437 : 2001 | AEROSPACE SERIES - CHROMATE CONVERSION COATINGS (YELLOW) FOR ALUMINIUM AND ALUMINIUM ALLOYS |
ISO 3679:2015 | Determination of flash no-flash and flash point — Rapid equilibrium closed cup method |
ISO 7253:1996 | Paints and varnishes — Determination of resistance to neutral salt spray (fog) |
ISO 7724-3:1984 | Paints and varnishes Colorimetry Part 3: Calculation of colour differences |
ISO 11890-1:2007 | Paints and varnishes — Determination of volatile organic compound (VOC) content — Part 1: Difference method |
PREN 2434-05 : 200P1 | AEROSPACE SERIES - PAINTS AND VARNISHES - TWO COMPONENT COLD CURING POLYURETHANE FINISH - PART 05: HIGH FLEXIBILITY AND CHEMICAL AGENT RESISTANCE FOR MILITARY APPLICATION |
ISO 4628-10:2016 | Paints and varnishes — Evaluation of degradation of coatings — Designation of quantity and size of defects, and of intensity of uniform changes in appearance — Part 10: Assessment of degree of filiform corrosion |
ISO 2811-2:2011 | Paints and varnishes Determination of density Part 2: Immersed body (plummet) method |
PREN 4160 : 200P1 | AEROSPACE SERIES - NON-METALLIC MATERIALS - PAINTS AND VARNISHES - TEST METHODS - DETERMINATION OF THE EFFECT OF THERMAL EXPOSURE |
EN 2101 : 1991 | AEROSPACE SERIES - CHROMIC ACID ANODIZING OF ALUMINIUM AND WROUGHT ALUMINIUM ALLOYS |
PREN 3837 : 200P1 | AEROSPACE SERIES - PAINTS AND VARNISHES - NATURE AND METHOD FOR SURFACE PREPARATION OF TEST PIECES IN ALUMINIUM ALLOYS |
ISO 1517:1973 | Paints and varnishes Surface-drying test Ballotini method |
ISO 1518:1992 | Paints and varnishes Scratch test |
ISO 2812-1:2017 | Paints and varnishes — Determination of resistance to liquids — Part 1: Immersion in liquids other than water |
ISO 2811-4:2011 | Paints and varnishes Determination of density Part 4: Pressure cup method |
ISO 1513:2010 | Paints and varnishes Examination and preparation of test samples |
ISO 3251:2008 | Paints, varnishes and plastics Determination of non-volatile-matter content |
ISO 1519:2011 | Paints and varnishes Bend test (cylindrical mandrel) |
ISO 3680:2004 | Determination of flash/no flash Rapid equilibrium closed cup method |
ISO 3270:1984 | Paints and varnishes and their raw materials — Temperatures and humidities for conditioning and testing |
ISO 1524:2013 | Paints, varnishes and printing inks Determination of fineness of grind |
ISO 2409:2013 | Paints and varnishes Cross-cut test |
ISO 11890-2:2013 | Paints and varnishes Determination of volatile organic compound (VOC) content Part 2: Gas-chromatographic method |
ISO 9514:2005 | Paints and varnishes Determination of the pot life of multicomponent coating systems Preparation and conditioning of samples and guidelines for testing |
ISO 15710:2002 | Paints and varnishes — Corrosion testing by alternate immersion in and removal from a buffered sodium chloride solution |
ISO 4628-2:2016 | Paints and varnishes Evaluation of degradation of coatings Designation of quantity and size of defects, and of intensity of uniform changes in appearance Part 2: Assessment of degree of blistering |
EN 3840:2007 | Aerospace series - Paints and varnishes - Technical specification |
ISO 2431:2011 | Paints and varnishes Determination of flow time by use of flow cups |
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.