BS 4065:1966
|
Specification for plain setting rings for use with internal diameter measuring machines. Inch units
|
BS 3673-2:1965
|
Specification for spring retaining rings Carbon steel E clips
|
BS 7357:1990
|
Specification for 7.5 L WC flushing cisterns
|
BS 4372:1968
|
Specification for engineers\' steel measuring rules
|
BS 1560-3.2:1989
|
Circular flanges for pipes, valves and fittings (Class designated). Steel, cast iron and copper alloy flanges Specification for cast iron flanges
|
BS 1804-3:1973
|
Specification for parallel steel dowel pins Parallel and taper types having screw threads for extraction purposes. Metric series
|
DEFSTAN 02-304(PT4)/2(2002) : 2002
|
SHAFTING SYSTEMS AND PROPULSORS - PART 4: REQUIREMENTS FOR REPAIR OF MAIN PROPULSION SHAFTING
|
SBAC TS 21 : 2011
|
MANUFACTURING SPECIFICATION FOR BOLTS, 900 MPA (130,000 LBF/IN[2]) - TENSILE AT ROOM TEMPERATURE
|
BS 1212-1:1990
|
Float operated valves Specification for piston type float operated valves (copper alloy body) (excluding floats)
|
DEFSTAN 02-304(PT3)/3(2020):2020
|
Shafting Systems & Propulsors Part 03: Manufacturing and Detail Design Requirements for Propulsors
|
DEFSTAN 02-323/2(2001) : 2001
|
REQUIREMENTS FOR CENTRIFUGES
|
DEFSTAN 47-22/1(1979) : 1979
|
END FITTINGS FOR FLEXIBLE HOSE ASSEMBLIES FOR AIRCRAFT - METRIC
|
BS 4168-7:1982
|
Hexagon socket screws and wrench keys: metric series Specification for hexagon socket shoulder screws
|
BS 9220:1971
|
Specification for rigid waveguide tubing of assessed quality: generic data and methods of test
|
03/317781 DC : DRAFT OCT 2003
|
BS A 293 - SPECIFICATION FOR PROCUREMENT OF METRIC SERIES LOCKING NUTS WITH NON METALLIC LOCKING ELEMENT WITH MAXIMUM OPERATING TEMPERATURE NOT GREATER THAN 235 C
|
BS 4185-1:1967
|
Machine tool components Locknuts (\'C\' type, socket set screw locking)
|
BS 1881-120:1983
|
Testing concrete Method for determination of the compressive strength of concrete cores
|
BS 3821-2:1974
|
Specification for hardmetal dies and associated hardmetal tools As-sintered pellets and finished dies for drawing round wire
|
08/30176707 DC : DRAFT APR 2008
|
BS 336 - SPECIFICATION FOR FIRE HOSE COUPLINGS AND ANCILLARY EQUIPMENT
|
BS 4878:1973
|
Specification for large (vee-throated) haulage rope pulleys for mines and quarries
|
BS 1212-3:1990
|
Float operated valves Specification for diaphragm type float operated valves (plastics bodied) for cold water services only (excluding floats)
|
SBAC TS 121 : 4
|
MANUFACTURING SPECIFICATION FOR STUDS, BOLTS AND SCREWS IN DTD 5639, EN 2959 AND EN 3220 MATERIAL 1210 MPA (175,000 LBF/IN[2]) TENSILE AT ROOM TEMPERATURE (FOR WHICH FORGING IS OPTIONAL AND QUALIFICATION NOT A REQUIREMENT)
|
SBAC TS 109 : 5
|
MANUFACTURING SPECIFICATION FOR STUDS, BOLTS AND SCREWS IN BS HR650, EN 2398, EN 2399 AND EN 3639 MATERIAL 900 MPA (130,000 LBF/IN[2]) TENSILE AT ROOM TEMPERATURE (FOR WHICH FORGING IS OPTIONAL AND QUALIFICATION NOT A REQUIREMENT)
|
SBAC TS 137 : 4
|
TECHNICAL SPECIFICATION FOR SELF RETAINING 'IMPEDANCE TYPE' BOLTS - IMPERIAL, TENSILE STRENGTH: 1275 MPA (185,000 LBF/IN[2]) AT AMBIENT TEMPERATURE 1065 MPA (154,000 LBF/IN[2]) AT 425 DEGREE C
|
BS 1212-2:1990
|
Float operated valves Specification for diaphragm type float operated valves (copper alloy body) (excluding floats)
|
SBAC TS 27 : 4
|
MANUFACTURING SPECIFICATION FOR STUDS, BOLTS AND SCREWS IN BS HR601 (NIMONIC) MATERIAL 1000 MPA (145,000 LBF/IN[2]) TENSILE AT ROOM TEMPERATURE - (FOR WHICH FORGING IS OPTIONAL AND QUALIFICATION NOT A REQUIREMENT)
|
SBAC TS 26 : 4
|
TECHNICAL SPECIFICATION FOR ALL METAL SELF-LOCKING NUTS (UNJ THREADS) 1210 MPA (175,000 LBF/IN[2]) MINIMUM TENSILE STRENGTH AT AMBIENT TEMPERATURE
|
SBAC TS 106 : 2
|
MANUFACTURING AND INSPECTION REQUIREMENTS FOR BRITISH METRIC SWAGED PIPE COUPLING (AS43020 AND AS43090 SERIES)
|
SBAC TS 108 : 5
|
MANUFACTURING SPECIFICATION FOR STUDS, BOLTS AND SCREWS IN BS S159 MATERIAL 1100 MPA (159,000 LBF/IN[2]) TENSILE AT ROOM TEMPERATURE (FOR WHICH FORGING IS OPTIONAL AND QUALIFICATION NOT A REQUIREMENT)
|
BS 336:1989
|
Specification for fire hose couplings and ancillary equipment
|
SBAC TS 24 : 6
|
MANUFACTURING SPECIFICATION FOR BOLTS, 1275 MPA (185,000 LBF/IN[2]) - TENSILE AT ROOM TEMPERATURE, 1000 MPA (145,000 LBF/IN[2]) TENSILE AT 650 DEGREE C
|
SBAC TS 148 : 4
|
MANUFACTURING SPECIFICATION FOR STUDS, BOLTS AND SCREWS IN DTD 5638, EN 2952, EN 2961 AND EN 3219 MATERIAL 1275 MPA (185,000 LBF/IN[2]) TENSILE AT ROOM TEMPERATURE (FOR WHICH FORGING IS OPTIONAL AND QUALIFICATION NOT A REQUIREMENT)
|
SBAC TS 149 : 2
|
TECHNICAL SPECIFICATION FOR ALL METAL SELF LOCKING NUTS (UNJ THREADS), 1550 MPA (225,000 LBF/IN[2]) MINIMUM TENSILE STRENGTH AT AMBIENT TEMPERATURE
|
BS 3921:1985
|
Specification for clay bricks
|
SBAC TS 135 : 2
|
TECHNICAL SPECIFICATION FOR SELF LOCKING NUTS (MJ THREADS) REDUCED HEXAGON, DEEP COUNTERBORED TENSILE STRENGTH: 1100 MPA AT AMBIENT TEMPERATURE
|
SAEITC TS 22 ISSUE 10 : 2008
|
MANUFACTURING SPECIFICATION FOR BOLTS, 1100 MPA (159,000 LBF/IN[2]) - ULTIMATE TENSILE STRENGTH - MINIMUM AT ROOM TEMPERATURE
|
BS 2704:1978
|
Specification for calibration blocks for use in ultrasonic flaw detection
|
SBAC TS 175 : 2
|
SPECIFICATION FOR MANUFACTURE, PERFORMANCE AND TESTING OF QUICK RELEASE PINS (BALL TYPE) METRIC
|
SAEITC TSC 47-022 ISSUE 1 : 2018
|
END FITTINGS FOR HOSE ASSEMBLIES METRIC
|
SBAC TS 134 : 4
|
TECHNICAL SPECIFICATION FOR SELF RETAINING 'IMPEDANCE TYPE' BOLTS - METRIC TENSILE STRENGTH: 1275 MPA AT AMBIENT TEMPERATURE 1065 MPA AT 425 DEGREE C
|
SBAC TS 41 : 6
|
MANUFACTURING SPECIFICATION FOR INSERTS, SCREW THREAD, UNIFIED, SCREW LOCKING, HELICAL COIL, BS HR503 (NIMONIC 90) SILVER COATED
|
BS 5380:1984
|
Specification for hydraulic port and stud coupling using \'O\'-ring sealing and \'G\' series fastening threads
|
BS 4772:1988
|
Specification for ductile iron pipes and fittings
|
BS 436-1:1967
|
Spur and helical gears Basic rack form, pitches and accuracy (diametral pitch series)
|
BS 1983-1:1969
|
Specification for chucks for machine tools and portable power tools Tool-holding chucks
|
BS 426:1969
|
Specification for fixed centres for use on machine tools and in other applications
|
BS 3673-1:1968
|
Specification for spring retaining rings Carbon steel circlips
|
BS 4A 100:2003
|
Specification for general requirements for bolts and free running nuts of tensile strength not exceeding 1249 MPa
|
BS 2464-3:1968
|
Specification for hose couplings for petrol, oil and lubricants Quick-acting couplings
|
BS 6073-1:1981
|
Precast concrete masonry units Specification for precast concrete masonry units
|
BS M 36:1970
|
Method for ultrasonic testing of special forgings by an immersion technique using flat-bottomed holes as a reference standard
|
BS 939:1977
|
Specification for engineers\' squares (including cylindrical and block squares)
|
BS 2782-3:Method 332A:1976
|
Methods of testing plastics. Mechanical properties Stiffness of plastics film
|
BS 3821-3:1974
|
Specification for hardmetal dies and associated hardmetal tools As-sintered pellets and finished dies for drawing round bar
|
BS 3A 100:1991
|
Specification for general requirements for bolts and free running nuts of tensile strength not exceeding 1249 MPa
|
BS M 32:1969
|
Specification for dimensions of aircraft accessory drives and mounting pads
|
BS 4185-2:1967
|
Machine tool components Collars
|
BS 1098-2:1977
|
Specification for jig bushes Metric units
|
BS 1098-1:1967
|
Specification for jig bushes Inch units
|
BS 4064:1966
|
Specification for plain setting rings for use with internal diameter measuring machines. Metric units
|
BS 3711:1964
|
Specification for railway vacuum brake cylinders, rolling ring type
|
BS 1804-1:1966
|
Specification for parallel steel dowel pins Inch series
|
BS 3673-3:1968
|
Specification for spring retaining rings Carbon steel C clips
|
BS 6072:1981
|
Method for magnetic particle flaw detection
|
BS MA 22:1973
|
Specification for cast roller fairleads
|
BS 2A 293:2005
|
Procurement of self-locking nuts with non-metallic locking elements. Metric series. Specification
|
BS 5892-1(1992) : 1992
|
RAILWAY ROLLING STOCK MATERIALS - PART 1: SPECIFICATION FOR AXLES FOR TRACTION AND TRAILING STOCK
|