ISO 3968:2017
Current
The latest, up-to-date edition.
Hydraulic fluid power — Filters — Evaluation of differential pressure versus flow
Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users
English, French
07-24-2017
ISO 3668:2017 specifies a procedure for evaluating differential pressure versus flow characteristics of hydraulic filters and constitutes a basis for agreement between the filter manufacturer and user.
It also specifies a method for measurement of the differential pressure generated at different flow rates and viscosities by the relevant parts of a filter assembly, spin-on and any valves contained within the filter which are in the flow stream. The typical types of filter to be tested are as follows:
Type 1: which are spin-on filters in which the replaceable unit does not include a filter head (it might or might not include the element by-pass valve);
Type 2: which are spin-on filters in which the replaceable element is tested together with a filter head (it might or might not include the element by-pass valve);
Type 3: which are filter assembly, usually of the replacement element type, that is the housing (head and bowl) and element.
DevelopmentNote |
Supersedes NFPA T3.10.14 (09/2004) Supersedes ISO/FDIS 3968. (07/2017)
|
DocumentType |
Standard
|
Pages |
17
|
PublisherName |
International Organization for Standardization
|
Status |
Current
|
Supersedes |
Standards | Relationship |
IS 9269 : 2023 | Identical |
UNI ISO 3968:2017 | Identical |
BS ISO 3968:2017 | Identical |
UNI ISO 3968 : 2005 | Identical |
NEN ISO 3968 : 2017 | Identical |
NF ISO 3968 : 2017 | Identical |
GOST R ISO 3968 : 2011 | Identical |
NBN E 48 108 : 1988 | Identical |
NFE 48 677 : 1986 | Similar to |
BS 6277:1982 | Identical |
NBN E 48 012 : 1987 | Identical |
BS 7403-12:2000 | Full-flow lubricating oil filters for internal combustion engines Filtration efficiency using particle counting, and contaminant retention capacity |
MIL-DTL-8815-31 Base Document:2009 | FILTER ELEMENTS, NON-CLEANABLE, FLUID PRESSURE, HYDRAULIC LINE, 3,000 PSI, 5 MICRON ABSOLUTE, -65 DEGREES F TO 275 DEGREES F |
BS ISO 16908:2014 | Hydraulic filter element test methods. Thermal conditioning and cold start-up simulation |
13/30258990 DC : 0 | BS ISO 16908 - HYDRAULIC FILTER ELEMENT TEST METHODS - THERMAL CONDITIONING AND COLD START-UP SIMULATION |
BS ISO 14085-3:2015 | Aerospace series. Hydraulic filter elements. Test methods Filtration efficiency and retention capacity |
BS 7403-1:1998 | Full-flow lubricating oil filters for internal combustion engines Methods of test for differential pressure/flow characteristics |
BS ISO 19438:2003 | Diesel fuel and petrol filters for internal combustion engines. Filtration efficiency using particle counting and contaminant retention capacity |
SAE J 1985 : 2013 | FUEL FILTERS - INITIAL SINGLE-PASS EFFICIENCY TEST METHOD |
ISO 16889:2008 | Hydraulic fluid power Filters Multi-pass method for evaluating filtration performance of a filter element |
ISO/TR 13353:1994 | Diesel fuel and petrol filters for internal combustion engines Initial efficiency by particule counting retention capacity and gravimetric efficiency |
BS ISO 27407:2010 | Hydraulic fluid power. Marking of performance characteristics on hydraulic filters |
PD ISO/TR 15640:2011 | Hydraulic fluid power contamination control. General principles and guidelines for selection and application of hydraulic filters |
ISO/TS 13353:2002 | Diesel fuel and petrol filters for internal combustion engines Initial efficiency by particule counting |
ISO/TS 16332:2006 | Diesel engines Fuel filters Method for evaluating fuel/water separation efficiency |
ISO 16908:2014 | Hydraulic filter element test methods Thermal conditioning and cold start-up simulation |
BS 7403-2:1998 | Full-flow lubricating oil filters for internal combustion engines Method of test for element by-pass valve characteristics |
MIL-DTL-8815-32 Base Document:2010 | FILTER ELEMENTS, NON-CLEANABLE, FLUID PRESSURE, HYDRAULIC LINE, 3000 PSI, 5 MICRON ABSOLUTE, -65 DEGREES F TO 275 DEGREES F, H-60 AIRCRAFT |
BS ISO 14085-1:2015 | Aerospace series. Hydraulic filter elements. Test methods Test sequence |
BS ISO 16889 : 2008 | HYDRAULIC FLUID POWER - FILTERS - MULTI-PASS METHOD FOR EVALUATING FILTRATION PERFORMANCE OF A FILTER ELEMENT |
08/30170008 DC : DRAFT SEP 2008 | BS ISO 27407 - HYDRAULIC FLUID POWER - MARKING OF PERFORMANCE CHARACTERISTICS ON HYDRAULIC FILTERS |
15/30271100 DC : 0 | BS ISO 16332 - DIESEL ENGINES - FUEL FILTERS - METHOD FOR EVALUATING FUEL/ WATER SEPARATION EFFICIENCY |
BS ISO 14085-2:2015 | Aerospace series. Hydraulic filter elements. Test methods Conditioning |
BS 7403-3:1998 | Full-flow lubricating oil filters for internal combustion engines Methods of test for resistance to high differential pressure and to elevated temperature |
ISO 16860:2005 | Hydraulic fluid power — Filters — Test method for differential pressure devices |
ISO 27407:2010 | Hydraulic fluid power Marking of performance characteristics on hydraulic filters |
ISO 4548-12:2017 | Methods of test for full-flow lubricating oil filters for internal combustion engines — Part 12: Filtration efficiency using particle counting and contaminant retention capacity |
ISO/TS 23556:2007 | Performance test method for diesel engine soot-removal devices in lubricating oils Initial filtration efficiency |
BS ISO 11170:2013 | Hydraulic fluid power. Sequence of tests for verifying performance characteristics of filter elements |
ISO 11170:2013 | Hydraulic fluid power — Sequence of tests for verifying performance characteristics of filter elements |
13/30271035 DC : 0 | BS ISO 14085-3 - AEROSPACE SERIES - HYDRAULIC FILTER ELEMENTS - TEST METHODS - PART 3: FILTRATION EFFICIENCY AND RETENTION CAPACITY |
13/30271032 DC : 0 | BS ISO 14085-2 - AEROSPACE SERIES - HYDRAULIC FILTER ELEMENTS - TEST METHODS - PART 2: CONDITIONING |
BS ISO 16860:2005 | Hydraulic fluid power. Filters. Test method for differential pressure devices |
16/30316730 DC : 0 | BS ISO 4548-12 - METHODS OF TEST FOR FULL-FLOW LUBRICATING OIL FILTERS FOR INTERNAL COMBUSTION ENGINES - PART 12: FILTRATION EFFICIENCY USING PARTICLE COUNTING, AND CONTAMINANT RETENTION CAPACITY |
ISO 19438:2003 | Diesel fuel and petrol filters for internal combustion engines — Filtration efficiency using particle counting and contaminant retention capacity |
SAE J 2312 : 2013 | AUTOMATIC TRANSMISSION INTAKE FILTER TEST PROCEDURE |
ISO/TR 15640:2011 | Hydraulic fluid power contamination control General principles and guidelines for selection and application of hydraulic filters |
ISO 14085-1:2015 | Aerospace series Hydraulic filter elements Test methods Part 1: Test sequence |
BS ISO 4548-12:2017 | Methods of test for full-flow lubricating oil filters for internal combustion engines Filtration efficiency using particle counting and contaminant retention capacity |
13/30271029 DC : 0 | BS ISO 14085-1 - AEROSPACE SERIES - HYDRAULIC FILTER ELEMENTS - TEST METHODS - PART 1: TEST SEQUENCE |
11/30214548 DC : 0 | BS ISO 11170 - HYDRAULIC FLUID POWER - SEQUENCE OF TESTS FOR VERIFYING PERFORMANCE CHARACTERISTICS OF FILTER ELEMENTS |
98/717481 DC : DRAFT DEC 1998 | ISO/CD 16009 - HYDRAULIC FLUID POWER - FILTER - METHOD FOR DETERMINING FILTRATION PERFORMANCE OF AN OFF-LINE ELEMENT |
06/30128772 DC : DRAFT OCT 2006 | ISO 16889 - HYDRAULIC FLUID POWER FILTERS - MULTI-PASS METHOD FOR FILTRATION PERFORMANCE OF A FILTER ELEMENT |
DIN 65385:1991-12 | AEROSPACE; HYDRAULIC FLUID POWER; FILTER ELEMENTS; REPORTING OF TEST DATA |
DD ISO/TS 23556:2007 | Performance test method for diesel engine soot-removal devices in lubricating oils. Initial filtration efficiency |
ISO 14085-2:2015 | Aerospace series Hydraulic filter elements Test methods Part 2: Conditioning |
MIL-DTL-8815-33 Base Document:2011 | FILTER ELEMENTS, NON-CLEANABLE, FLUID PRESSURE, HYDRAULIC LINE, 3500 PSI, 5 MICRON ABSOLUTE, -65 DEGREES F TO 275 DEGREES F, AVIATION GROUND POWER UNIT (AGPU) |
ISO 14085-3:2015 | Aerospace series — Hydraulic filter elements — Test methods — Part 3: Filtration efficiency and retention capacity |
ISO 16332:2018 | Diesel engines — Fuel filters — Method for evaluating fuel/water separation efficiency |
SAE J 2321 : 2002 | SHIP SYSTEMS AND EQUIPMENT - GENERAL SPECIFICATION FOR FILTER ELEMENTS - HYDRAULIC AND LUBE OIL SERVICE |
ISO 9110-1:1990 | Hydraulic fluid power Measurement techniques Part 1: General measurement principles |
ISO 3675:1998 | Crude petroleum and liquid petroleum products Laboratory determination of density Hydrometer method |
ISO 5598:2008 | Fluid power systems and components Vocabulary |
ISO 6415:2005 | Internal combustion engines — Spin-on filters for lubricating oil — Dimensions |
ISO 1219-1:2012 | Fluid power systems and components — Graphical symbols and circuit diagrams — Part 1: Graphical symbols for conventional use and data-processing applications |
ISO 16889:2008 | Hydraulic fluid power Filters Multi-pass method for evaluating filtration performance of a filter element |
ISO 2909:2002 | Petroleum products Calculation of viscosity index from kinematic viscosity |
ISO 9110-2:1990 | Hydraulic fluid power Measurement techniques Part 2: Measurement of average steady-state pressure in a closed conduit |
ISO 4021:1992 | Hydraulic fluid power — Particulate contamination analysis — Extraction of fluid samples from lines of an operating system |
ISO 2944:2000 | Fluid power systems and components — Nominal pressures |
ISO 3448:1992 | Industrial liquid lubricants — ISO viscosity classification |
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.