05/30143456 DC : DRAFT DEC 2005

FOREWORD
INTRODUCTION
1 Scope
2 Normative references
3 Definitions and abbreviations
4 Conformance to this standard
5 Documentation
6 Management of functional safety
7 E/E/PE system safety lifecycle requirements
  7.1 General
  7.2 E/E/PE design requirements specification
  7.3 E/E/PE system safety validation planning
  7.4 E/E/PE system design and development
  7.5 E/E/PE system integration
  7.6 E/E/PE system operation and maintenance procedures
  7.7 E/E/PE system safety validation
  7.8 E/E/PE system modification
  7.9 E/E/PE system verification
8 Functional safety assessment
Annex A (normative) Techniques and measures for E/E/PE
                    safety-related systems: control of
                    failures during operation
      A.1 General
      A.2 Hardware safety integrity
      A.3 Systematic safety integrity
Annex B (normative) Techniques and measures for E/E/PE
                    safety-related systems: avoidance of
                    systematic failures during the different
                    phases of the lifecycle
Annex C (normative) Diagnostic coverage and safe failure
                    fraction
      C.1 Calculation of diagnostic coverage and safe
          failure fraction of a hardware element
      C.2 Determination of diagnostic coverage factors
Annex D (normative) Element safety manual
      D.1 General
      D.2 Contents
Annex E (normative) Special architecture requirements for
                    ASICs with on-chip redundancy
      E.1 General
      E.2 Beta-factor
Bibliography

IEC 61508-2