ASTM E 1613 : 2012 : REDLINE
Current
The latest, up-to-date edition.
Standard Test Method for Determination of Lead by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES), Flame Atomic Absorption Spectrometry (FAAS), or Graphite Furnace Atomic Absorption Spectrometry (GFAAS) Techniques
English
07-15-2012
CONTAINED IN VOL. 04.11, 2014 Specifies the lead analysis of sample extracts or digestates (for example, extracted or digested paint, soil, dust, and airborne particulate) using inductively coupled plasma atomic emission spectrometry (ICP-AES), flame atomic absorption spectrometry (FAAS), or graphite furnace atomic absorption spectrometry (GFAAS).
1.1 This test method is intended for use with extracted or digested samples that were collected during the assessment, management, or abatement of lead hazards from buildings, structures, or other locations.
1.2 This test method covers the lead analysis of sample extracts or digestates (for example, extracted or digested paint, soil, dust, and airborne particulate) using inductively coupled plasma atomic emission spectrometry (ICP-AES), flame atomic absorption spectrometry (FAAS), or graphite furnace atomic absorption spectrometry (GFAAS).
1.3 This test method contains directions for sample analysis, as well as quality assurance (QA) and quality control (QC), and may be used for purposes of laboratory accreditation and certification.
1.4 No detailed operating instructions are provided because of differences among various makes and models of suitable instruments. Instead, the analyst shall follow the instructions provided by the manufacturer of the particular instrument.
1.5 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.
1.6 This practice contains notes which are explanatory and not part of the mandatory requirements of this standard.
1.7 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
Committee |
D 22
|
DevelopmentNote |
Supersedes ASTM ES 35 (12/2001)
|
DocumentType |
Redline
|
Pages |
10
|
PublisherName |
American Society for Testing and Materials
|
Status |
Current
|
Supersedes |
ASTM E 1979 : 2017 : REDLINE | Standard Practice for Ultrasonic Extraction of Paint, Dust, Soil, and Air Samples for Subsequent Determination of Lead |
ASTM E 2115 : 2015 | Standard Guide for Conducting Lead Hazard Assessments of Dwellings and of Other Child-Occupied Facilities |
ASTM E 1727 : 2016 | Standard Practice for Field Collection of Soil Samples for Subsequent Lead Determination |
ASTM E 2913 : 2014 | Standard Practice for Hotplate Digestion of Lead from Composited Wipe Samples |
ASTM E 1729 : 2016 | Standard Practice for Field Collection of Dried Paint Samples for Subsequent Lead Determination |
ASTM D 7659 : 2010 | Standard Guide for Strategies for Surface Sampling of Metals and Metalloids for Worker Protection |
ASTM E 1605 : 2004 : R2012 | Standard Terminology Relating to Lead in Buildings |
ASTM D 1356 : 2017 : REDLINE | Standard Terminology Relating to Sampling and Analysis of Atmospheres |
ASTM E 1605 : 2004 | Standard Terminology Relating to Lead in Buildings |
ASTM E 2914 : 2014 | Standard Practice for Ultrasonic Extraction of Lead from Composited Wipe Samples |
ASTM E 1583 : 2017 | Standard Practice for Evaluating Laboratories Engaged in Determination of Lead in Paint, Dust, Airborne Particulates, and Soil Taken From and Around Buildings and Related Structures |
ASTM D 7659 : 2010 : R2015 | Standard Guide for Strategies for Surface Sampling of Metals and Metalloids for Worker Protection |
ASTM F 2923 : 2014 : REDLINE | Standard Specification for Consumer Product Safety for Children’s Jewelry |
ASTM F 2223 : 2015 : REDLINE | GUIDE FOR ASTM STANDARDS ON PLAYGROUND SURFACING |
ASTM D 7439 : 2014 : REDLINE | Standard Test Method for Determination of Elements in Airborne Particulate Matter by Inductively Coupled Plasma–Mass Spectrometry |
ASTM E 631 : 2015 : REDLINE | Standard Terminology of Building Constructions |
ASTM E 2119 : 2016 | Standard Practice for Quality Systems for Conducting In Situ Measurements of Lead Content in Paint or Other Coatings Using Field-Portable X-Ray Fluorescence (XRF) Devices |
ASTM E 1828 : 2001 | Standard Practice for Evaluating the Performance Characteristics of Qualitative Chemical Spot Test Kits for Lead in Paint (Withdrawn 2010) |
ASTM D 7707 : 2011 : R2016 | Standard Specification for Wipe Sampling Materials for Beryllium in Surface Dust |
ASTM E 1644 : 2017 : REDLINE | Standard Practice for Hot Plate Digestion of Dust Wipe Samples for the Determination of Lead |
ASTM E 1792 : 2003 : R2016 | Standard Specification for Wipe Sampling Materials for Lead in Surface Dust |
ASTM F 3012 : 2014 | Standard Specification for Loose-Fill Rubber for Use as a Playground Safety Surface under and around Playground Equipment |
ASTM D 7035 : 2016 : REDLINE | Standard Test Method for Determination of Metals and Metalloids in Airborne Particulate Matter by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES) |
ASTM E 2052 : 1999 | Standard Guide for Evaluation, Management, and Control of Lead Hazards in Facilities (Withdrawn 2008) |
ASTM E 2051 : 2001 | Standard Practice for the Determination of Lead in Paint, Settled Dust, Soil and Air Particulate by Field-Portable Electroanalysis (Withdrawn 2010) |
ASTM E 1792 : 2003 : R2011 | Standard Specification for Wipe Sampling Materials for Lead in Surface Dust |
ASTM F 2765 : 2014 : REDLINE | Standard Specification for Total Lead Content in Synthetic Turf Fibers |
CSA A440 : 2017 | NORTH AMERICAN FENESTRATION STANDARD/SPECIFICATION FOR WINDOWS, DOORS, AND SKYLIGHTS |
A500-16 | Building guards |
ASTM D 7707 :2011 | Standard Specification for Wipe Sampling Materials for Beryllium in Surface Dust |
ASTM E 1792 : 2003 | Standard Specification for Wipe Sampling Materials for Lead in Surface Dust |
ASTM E 1775 : 2016 : REDLINE | Standard Guide for Evaluating Performance of On-Site Extraction and Field-Portable Electrochemical or Spectrophotometric Analysis for Lead |
ASTM E 1728 : 2016 : REDLINE | Standard Practice for Collection of Settled Dust Samples Using Wipe Sampling Methods for Subsequent Lead Determination |
ASTM F 2999 : 2014 : REDLINE | Standard Consumer Safety Specification for Adult Jewelry |
ASTM D 4840 : 1999 | Standard Guide for Sampling Chain-of-Custody Procedures |
ASTM E 1645 : 2016 : REDLINE | Standard Practice for Preparation of Dried Paint Samples by Hotplate or Microwave Digestion for Subsequent Lead Analysis |
ASTM D 6785 : 2013 | Standard Test Method for Determination of Lead in Workplace Air Using Flame or Graphite Furnace Atomic Absorption Spectrometry |
ASTM E 1741 : 2000 | Standard Practice for Preparation of Airborne Particulate Lead Samples Collected During Abatement and Construction Activities for Subsequent Analysis by Atomic Spectrometry (Withdrawn 2009) |
ASTM E 1644 : 2017 : REDLINE | Standard Practice for Hot Plate Digestion of Dust Wipe Samples for the Determination of Lead |
ASTM E 1864 : 2002 | Standard Practice for Evaluating Quality Systems of Organizations Conducting Facility and Hazard Assessments for Lead in Paint, Dust, Airborne Particulate, and Soil in and around Buildings and Related Structures (Withdrawn 2011) |
ASTM E 1729 : 2016 | Standard Practice for Field Collection of Dried Paint Samples for Subsequent Lead Determination |
ASTM E 1726 : 2016 : REDLINE | Standard Practice for Preparation of Soil Samples by Hotplate Digestion for Subsequent Lead Analysis |
ASTM E 1775 : 2016 : REDLINE | Standard Guide for Evaluating Performance of On-Site Extraction and Field-Portable Electrochemical or Spectrophotometric Analysis for Lead |
ASTM E 1979 : 2017 : REDLINE | Standard Practice for Ultrasonic Extraction of Paint, Dust, Soil, and Air Samples for Subsequent Determination of Lead |
ASTM E 1728 : 2016 : REDLINE | Standard Practice for Collection of Settled Dust Samples Using Wipe Sampling Methods for Subsequent Lead Determination |
ASTM E 1727 : 2016 | Standard Practice for Field Collection of Soil Samples for Subsequent Lead Determination |
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.