EN 717-2:1994/AC:2002
|
WOOD-BASED PANELS - DETERMINATION OF FORMALDEHYDE RELEASE - PART 2: FORMALDEHYDE RELEASE BY THE GAS ANALYSIS METHOD
|
EN 13353:2008+A1:2011
|
Solid wood panels (SWP) - Requirements
|
EN 321:2001
|
Wood-based panels - Determination of moisture resistance under cyclic test conditions
|
EN 634-1:1995
|
Cement-bonded particleboards - Specification - Part 1: General requirements
|
EN 335-2:2006
|
Durability of wood and wood-based products - Definition of use classes - Part 2: Application to solid wood
|
EN 319:1993
|
Particleboards and fibreboards - Determination of tensile strength perpendicular to the plane of the board
|
EN 120:1992
|
Wood based panels - Determination of formaldehyde content - Extraction method called the perforator method
|
ISO 354:2003
|
Acoustics — Measurement of sound absorption in a reverberation room
|
EN 310:1993
|
Wood-based panels - Determination of modulus of elasticity in bending and of bending strength
|
EN 1087-1:1995
|
Particleboards - Determination of moisture resistance - Part 1: Boil test
|
EN 326-1:1994
|
Wood-based panels - Sampling, cutting and inspection - Part 1: Sampling and cutting of test pieces and expression of test results
|
EN 14755:2005
|
Extruded particleboards - Specifications
|
EN 326-2:2010+A1:2014
|
Wood-based panels - Sampling, cutting and inspection - Part 2: Initial type testing and factory production control
|
EN 14279:2004+A1:2009
|
Laminated Veneer Lumber (LVL) - Definitions, classification and specifications
|
CEN/TS 13354 : 2003
|
SOLID WOOD PANELS - BONDING QUALITY - TEST METHOD
|
EN 596:1995
|
Timber structures - Test methods - Soft body impact test of timber framed walls
|
EN 317:1993
|
Particleboards and fibreboards - Determination of swelling in thickness after immersion in water
|
EN 1058:2009
|
Wood-based panels - Determination of characteristic 5-percentile values and characteristic mean values
|
EN 300:2006
|
Oriented Strand Boards (OSB) - Definitions, classification and specifications
|
EN 1195:1997
|
Timber structures - Test methods - Performance of structural floor decking
|
EN 717-1:2004
|
Wood-based panels - Determination of formaldehyde release - Part 1: Formaldehyde emission by the chamber method
|
EN 1156:2013
|
Wood-based panels - Determination of duration of load and creep factors
|
EN 312:2010
|
Particleboards - Specifications
|
EN 622-5:2009
|
Fibreboards - Specifications - Part 5: Requirements for dry process boards (MDF)
|
EN 789:2004
|
Timber structures - Test methods - Determination of mechanical properties of wood based panels
|
EN 12114:2000
|
Thermal performance of buildings - Air permeability of building components and building elements - Laboratory test method
|
EN 12524 : 2000
|
BUILDING MATERIALS AND PRODUCTS - HYGROTHERMAL PROPERTIES - TABULATED DESIGN VALUES
|
EN 594:2011
|
Timber structures - Test methods - Racking strength and stiffness of timber frame wall panels
|
EN 325:2012
|
Wood-based panels - Determination of dimensions of test pieces
|
ISO 12572:2016
|
Hygrothermal performance of building materials and products Determination of water vapour transmission properties Cup method
|
EN ISO 12572:2016
|
Hygrothermal performance of building materials and products - Determination of water vapour transmission properties - Cup method (ISO 12572:2016)
|
EN 323:1993
|
Wood-based panels - Determination of density
|
EN 12369-1:2001
|
Wood-based panels - Characteristic values for structural design - Part 1: OSB, particleboards and fibreboards
|
EN ISO 354:2003
|
Acoustics - Measurement of sound absorption in a reverberation room (ISO 354:2003)
|
EN ISO 140-3:1995/A1:2004
|
ACOUSTICS - MEASUREMENT OF SOUND INSULATION IN BUILDINGS AND OF BUILDING ELEMENTS - PART 3: LABORATORY MEASUREMENTS OF AIRBORNE SOUND INSULATION OF BUILDING ELEMENTS
|
EN ISO 9001:2015
|
Quality management systems - Requirements (ISO 9001:2015)
|
EN 12664:2001
|
Thermal performance of building materials and products - Determination of thermal resistance by means of guarded hot plate and heat flow meter methods - Dry and moist products of medium and low thermal resistance
|
EN 15197:2007
|
Wood-based panels - Flaxboards - Specifications
|
EN 335-3:1995
|
Durability of wood and wood-based products - Definition of hazard classes of biological attack - Part 3: Application to wood-based panels
|
ISO 9001:2015
|
Quality management systems — Requirements
|
ENV 1099 : DRAFT 97
|
PLYWOOD - BIOLOGICAL DURABILITY - GUIDANCE FOR THE ASSESSMENT OF PLYWOOD FOR USE IN DIFFERENT HAZARD CLASSES
|
EN 622-3:2004
|
Fibreboards - Specifications - Part 3: Requirements for medium boards
|
EN 316:2009
|
Wood fibre boards - Definition, classification and symbols
|
EN 622-2:2004/AC:2005
|
FIBREBOARDS - SPECIFICATIONS - PART 2: REQUIREMENTS FOR HARDBOARDS
|
EN 622-4:2009
|
Fibreboards - Specifications - Part 4: Requirements for softboards
|
EN 313-2:1999
|
Plywood - Classification and terminology - Part 2: Terminology
|
EN 314-2:1993
|
Plywood - Bonding quality - Part 2: Requirements
|
EN 633:1993
|
Cement-bonded particleboards - Definition and classification
|
EN 1995-1-1:2004/A2:2014
|
EUROCODE 5: DESIGN OF TIMBER STRUCTURES - PART 1-1: GENERAL - COMMON RULES AND RULES FOR BUILDINGS
|
EN 12871:2013
|
Wood-based panels - Determination of performance characteristics for load bearing panels for use in floors, roofs and walls
|
EN 634-2:2007
|
Cement-bonded particleboards - Specifications - Part 2: Requirements for OPC bonded particleboards for use in dry, humid and external conditions
|
CEN/TR 14823:2003
|
Durability of wood and wood-based products - Quantitative determination of pentachlorophenol in wood - Gas chromatographic method
|
EN 383:2007
|
Timber Structures - Test methods - Determination of embedment strength and foundation values for dowel type fasteners
|
EN 309:2005
|
Particleboards - Definition and classification
|
EN 12369-2:2011
|
Wood-based panels - Characteristic values for structural design - Part 2: Plywood
|
EN 335-1:2006
|
Durability of wood and wood- based products - Definition of use classes - Part 1: General
|
EN 12775:2001
|
Solid wood panels - Classification and terminology
|
EN 636:2012+A1:2015
|
Plywood - Specifications
|
EN 622-1:2003
|
Fibreboards - Specifications - Part 1: General requirements
|
CEN/TR 12872:2014
|
Wood-based panels - Guidance on the use of load-bearing boards in floors, walls and roofs
|
EN 314-1:2004
|
Plywood - Bonding quality - Part 1: Test methods
|