ANSI/NCSL Z540 3 : 2006(R2013)
Withdrawn
Withdrawn
REQUIREMENTS FOR THE CALIBRATION OF MEASURING AND TEST EQUIPMENT
Available format(s)
Hardcopy
Language(s)
English
Published date
01-12-2013
Withdrawn date
10-26-2023
US$135.90
Excluding Tax where applicable
Establishes the technical requirements for the calibration of measuring and test equipment.
| DevelopmentNote |
Supersedes ANSI/NCSL Z540 1. (06/2008)
|
| DocumentType |
Standard
|
| Pages |
0
|
| ProductNote |
This standard is superseded by ISO/IEC 17025:2017
|
| PublisherName |
National Conference of Standards Laboratories
|
| Status |
Withdrawn
|
| Supersedes |
| MIL-DTL-83734 Revision H:2007 | Sockets, Plug-in Electronic Components, Dual-in-Line (DIPS) and Single-in-Line Packages (SIPS), General Specification for |
| DSCC 04046 : D | WIRE, ELECTRICAL, COMPOSITE, POLYTETRAFLUOROETHYLENE/POLYIMIDE INSULATED, SMOOTH SURFACE, LIGHT WEIGHT, NICKEL COATED, COPPER CONDUCTOR, 260 DEGREES C, 600 VOLT |
| MIL-DTL-3933 Revision L:2014 | Attenuators, Fixed, Space Level, Non-Space Level General Specification for |
| MIL-DTL-28788 Revision C:2010 | Switches, Air and Liquid Flow, Sensing, General Specification for |
| DSCC 04039 : D | WIRE, ELECTRICAL, COMPOSITE, POLYAMIDE BRAID, POLYTETRAFLUOROETHYLENE/POLYIMIDE INSULATED, SMOOTH SURFACE, NORMAL WEIGHT, TIN COATED, COPPER CONDUCTOR, 150 DEGREES C, 600 VOLT |
| DSCC 93003 : C | CONNECTOR, HIGH DENSITY, BLADE AND FORK, BACKPANEL, EIGHT ROW, 372 CONTACT POSITIONS |
| DSCC 93007 : B | CONNECTOR, HIGH DENSITY, BLADE AND FORK, BACKPANEL, EIGHT ROW, 296 CONTACT POSITIONS |
| OIML G 1-106 : 2012 | EVALUATION OF MEASUREMENT DATA - THE ROLE OF MEASUREMENT UNCERTAINTY IN CONFORMITY ASSESSMENT |
| MIL-STD-1580 Revision B:2003 | Destructive Physical Analysis for Electronic, Electromagnetic, and Electromechanical Parts |
| MIL-PRF-31032 Revision C:2016 | Printed Circuit Board/Printed Wiring Board, General Specification for |
| MIL-R-10509 Revision J:2007 | RESISTOR, FIXED, FILM (HIGH STABILITY) GENERAL SPECIFICATION FOR |
| MIL-DTL-32480 Base Document:2014 | Adapter, Hydraulic and Pneumatic, Flareless Tube Fitting to ORFS Connectors, 1500 to 3000 PSI and Minus 65 Degrees Fahrenheit to Plus 250 Degrees Fahrenheit, General Specification for |
| MIL-DTL-5515 Revision F:2013 | Pump, Hydraulic, Ram, Hand Driven |
| MIL-DTL-8783 Revision D:2009 | Clamp, Hose, Flat Band 500 Degrees F, General Specification for |
| MIL-DTL-23971 Revision E:2017 | Power Dividers, Power Combiners, and Power Divider/Combiners, General Specification for |
| MIL-PRF-94 Revision G:2006 | Resistor, Variable, Composition, General Specification for |
| BS EN ISO 14998:2013 | Petroleum and natural gas industries. Downhole equipment. Completion accessories |
| DSCC 04040 : C | WIRE, ELECTRICAL, COMPOSITE, POLYTETRAFLUOROETHYLENE/POLYIMIDE INSULATED, SMOOTH SURFACE, NORMAL WEIGHT, SILVER COATED, COPPER CONDUCTOR, 200 DEGREES C, 600 VOLT |
| MIL-DTL-85670 Revision D:2012 | ANTENNA, BROADBAND AS-3191/A, AS-3792/A, AND AS-3793/A |
| MIL-DTL-3922 Revision E:2016 | Flanges, Waveguide, General Purpose, General Specification for |
| MIL-DTL-32372 Revision A:2016 | Fitting, Adapter, Hydraulic and Pneumatic, NPTF to ORFS Connectors, 1500 to 3000 PSI and -65°F to 250°F |
| MIL-PRF-27208 Revision F:2006 | Resistor, Variable, Wirewound, Nonprecision General Specification for |
| MIL-PRF-83383 Revision F:2017 | Circuit Breakers, Remote Control, Thermal, Trip Free General Specification For |
| MIL-DTL-25879 Revision G:2012 | Switch, Radio Frequency Transmission Line, Coaxial Type SA-521A/A |
| MIL-PRF-24236 Revision D:2006 | Switches, Thermostatic, (Metallic and Bimetallic), General Specification for |
| MIL-DTL-13484 Revision G:2011 | Switch, Sensitive: 30 Volts Direct Current Maximum, Waterproof |
| MIL-DTL-12285 Revision G:2016 | Switches, Thermostatic |
| MIL-DTL-5815 Revision H:2012 | Antenna, Airborne, UHF - Band, General Specification for |
| MIL-DTL-32554 Base Document:2016 | Straps, Tie-Down, Adjustable, Non-Metallic, Cable Bundling, General Specification for |
| MIL-DTL-22992 Revision H:2015 | Connectors, Plugsand Receptacles, Electrical, Waterproof, Quick Disconnect, Heavy Duty Type, General Specification for |
| API SPEC 19TT : 2016 | SPECIFICATION FOR DOWNHOLE WELL TEST TOOLS AND RELATED EQUIPMENT |
| MIL-DTL-25038 Revision J:2012 | Wire, Electrical, High Temperature, Fire Resistant, and Flight Critical |
| MIL-DTL-28791 Revision D:2016 | Isolators and Circulators, Radio Frequency, General Specification for |
| MIL-STD-750 Revision F:2011 | Test Methods for Semiconductor Devices |
| MIL-DTL-8971 Revision F:2013 | Electrodes, Graphite, Spectrometric Grade |
| DSCC 93005 : B | CONNECTOR, HIGH DENSITY, BLADE AND FORK, BACKPANEL, EIGHT ROW, 300 CONTACT, 8 FIBER OPTIC POSITIONS |
| MIL-PRF-49462 Revision C:2008 | Resistor, Fixed, Film, High Voltage General Specification for |
| MIL-DTL-19491 Revision J:2014 | Semiconductor Devices, Packaging of |
| MIL-DTL-17813 Revision H:2009 | Expansion Joints, Pipe, Metallic Bellows, General Specification for |
| SAE AS 23053 : 2016 | INSULATION SLEEVING, ELECTRICAL, HEAT SHRINKABLE, GENERAL SPECIFICATION FOR |
| SAE AS83519C | Shield Termination, Solder Style, Insulated, Heat-Shrinkable, Environment Resistant General Specification For |
| DSCC 89112 : B | POWER DIVIDER, 4-WAY, 0 DEGREE, CONNECTORS |
| I.S. EN ISO 17078-4:2010 | PETROLEUM AND NATURAL GAS INDUSTRIES - DRILLING AND PRODUCTION EQUIPMENT - PART 4: PRACTICES FOR SIDE-POCKET MANDRELS AND RELATED EQUIPMENT |
| DSCC 04036 : D | WIRE, ELECTRICAL, COMPOSITE, POLYTETRAFLUOROETHYLENE/POLYIMIDE INSULATED, SMOOTH SURFACE, LIGHT WEIGHT, NICKEL COATED, HIGH STRENGTH OR ULTRA HIGH STRENGTH COPPER ALLOY, 260 DEGREES C, 600 VOLT |
| DSCC 90038 : D | RESISTOR, FIXED, FILM, PRECISION, 0.25 WATT, POWER CURVE C |
| NASA-STD-8739.12:2018 | METROLOGY & CALIBRATION |
| SAE AS39029D | Contacts, Electrical Connector, General Specification For |
| MIL-STD-883 Revision K:2016 | Microcircuits |
| SAE AS95234A | Connectors, Electrical, Reverse Bayonet, General Specification for |
| MIL-PRF-50884 Revision F:2014 | Printed Wiring Board, Flexible or Rigid-Flex, General Specification for |
| MIL-DTL-83731 Revision E:2016 | Switches, Toggle, Unsealed and Sealed Toggle General Specification for |
| MIL-DTL-83797 Revision C:2008 | Hose, Rubber, Lightweight, Medium Pressure, General Specification for |
| MIL-DTL-83513 Revision G:2008 | Connectors, Electrical, Rectangular, Microminiature, Polarized Shell, General Specification for |
| MIL-PRF-32271 Revision A:2014 | Batteries, Non-Rechargeable, Lithium General Specification for |
| MIL-DTL-27272 Revision D:2015 | Fittings, Polytetrafluoroethylene Hose, High-Temperature, Medium-Pressure, General Specification for |
| MIL C 5 : G | CAPACITOR, FIXED, MICA DIELECTRIC, GENERAL SPECIFICATION FOR |
| MIL-PRF-32192 Base Document:2005 | Resistor, Chip, Thermal (Thermistor), General Specification for |
| MIL-DTL-22641 Revision G:2016 | Adapters, Coaxial to Waveguide, General Specification for |
| MIL P 50884 : E | PRINTED WIRING BOARD, FLEXIBLE OR RIGID-FLEX, GENERAL SPECIFICATION FOR |
| MIL-DTL-8790 Revision F:2007 | Hose Assemblies, Rubber, Hydraulic, High Pressure 3,000 PSI, Operating Temperature Range -65 Degrees F to +275 Degrees F, Field Attachable |
| W-C-375 Revision E:2013 | Circuit Breakers, Molded Case; Branch Circuit and Service |
| MIL-PRF-55110 Revision H:2014 | Printed Wiring Board, Rigid, General Specification for |
| MIL-DTL-7790 Revision A:2002 | Resistor, Thermocouple Lead Spool (Future Acquisitions for this item may refer to DLA Land and Maritime Drawing 20011) |
| MIL-DTL-13735 Revision H:2017 | Switches, Toggle: 28 Volt DC |
| MIL-PRF-32565 Revision A:2017 | Battery, Rechargeable, Sealed, 6T Lithium-Ion |
| MIL-DTL-6000 Revision D:2007 | Hose, Rubber, Aircraft, Fuel, Oil, Coolant, Water, and Alcohol |
| W-S-896 Revision G:2014 | Switches, Toggle (Toggle and Lock), Flush Mounted (General Specification) |
| MIL-DTL-32054 Revision B:2012 | Mounting MT-1995/A for use with Coaxial Type SA-521A/A Radio Frequency Transmission Line Switch |
| MIL-DTL-32139 Revision B:2017 | Connectors, Electrical, Rectangular, Nanominiature, Polarized Shell, General Specification for |
| MIL B 18 : F | BATTERIES, NON-RECHARGEABLE, DRY |
| MIL-DTL-28748 Revision D:2001 | Connector, Plug and Receptacle, Rectangular, Rack and Panel Solder Type and Crimp Type Contacts General Specification for |
| MIL-DTL-83796 Revision B:2008 | Hose Assembly, Rubber, Lightweight, Medium Pressure, General Specification for |
| MIL-DTL-9419 Revision H:2016 | Switch, Toggle, Momentary, Four-Position on, Center off, General Specification for |
| MIL-DTL-5523 Revision E:2011 | Valve; Relief, Hydraulic Pressure |
| MIL-DTL-3786 Revision J:2013 | Switches, Rotary (Circuit Selector, Low-Current Capacity), General Specification for |
| MIL-PRF-22885 Revision J:2016 | Switches, Push Button, Illuminated General Specification for |
| MIL-DTL-32330 Revision A:2015 | Hose Assembly, Conductive Polytetrafluoroethylene Tube, Smooth Bore, Flared and Flareless, Tube to Hose, with Swivel Nut |
| MIL STD 750-2 : A | MECHANICAL TEST METHODS FOR SEMICONDUCTOR DEVICES - PART 2: TEST METHODS 2001 THROUGH 2999 |
| MIL-DTL-28827 Revision C:2011 | Switches, Thermostatic, (Volatile Liquid), Hermetically Sealed, General Specification for |
| MIL-PRF-8805 Revision G:2016 | Switches and Switch Assemblies, Sensitive, Snap Action (Basic, Limit, Push Button and Toggle Switches), General Specification for |
| MIL-PRF-3098 Revision L:2017 | Crystal Units, Quartz General Specification for |
| MIL-DTL-3950 Revision K:2016 | Switches, Toggle, Environmentally Sealed, General Specification for |
| MIL-DTL-25579 Revision H:2014 | Hose Assembly, Polytetrafluoroethylene, High Temperature, Medium Pressure, General Specification for |
| MIL-PRF-27 Revision G:2014 | Transformers and Inductors (Audio, Power, and High-Power Pulse), General Specification for |
| MIL-DTL-16225 Revision C:2010 | Loudspeaker, Permanent Magnet, Blastproof and Submersible, Navy Type 49546( ) |
| MIL-DTL-6749 Revision B:2008 | Resistor, Variable, Wirewound, Nonprecision, Aircraft Power |
| MIL-DTL-11996 Revision C:2015 | Handsets, General Specification for |
| MIL-PRF-55629 Revision E:2011 | Circuit Breakers, Magnetic, Unsealed or Panel Seal, Trip-Free, General Specification for |
| MIL-DTL-8788 Revision G:2015 | Hose, Rubber, Hydraulic, High Pressure 3,000 PSI, Operating Temperature Range -65 Degrees F to +160 Degrees F |
| MIL-DTL-12606 Revision E:2000 | Loudspeaker, Permanent Magnet (Unencased, 3-Inch and 4-Inch Diameter Cone, 2-Watt; Fungus-, and Immersion-Resistant), Type LS-445/U, M12606-01, and M12606-02 |
| W-F-1814 Revision D:2013 | Fuses, Cartridge, High-Interrupting Capacity |
| MIL-DTL-12632 Revision E:2016 | Loudspeakers, Permanent Magnet (Encased, 2-Watt, Fungus-, Gunblast-, and Immersion -Resistant), General Specification for |
| MIL-DTL-55041 Revision F:2012 | Switches, Waveguide, General Specification for |
| MIL-DTL-10911 Revision E:2012 | Loudspeakers, Permanent Magnet, (Unencased, 2.5-, 3-, 4-, 5-, 6-, 8-, 10-, and 12-Inch Diameter Cones), General Specifications for |
| MIL-DTL-27267 Revision D:2012 | Hose, Cres Wire Reinforced, Polytetrafluoroethylene, Four Hundred Fifty Degree Fahrenheit, Medium Pressure |
| MIL-PRF-49291 Revision D:2013 | Fiber, Optical, (Metric) General Specification for |
| MIL-DTL-24317 Revision B:2010 | Switches, Multistation, Pushbutton, Illuminated and Non-Illuninated), General Specification for |
| MIL-DTL-15370 Revision K:2015 | Couplers, Directional General Specification for |
| API SPEC 20E : 2017 | ALLOY AND CARBON STEEL BOLTING FOR USE IN THE PETROLEUM AND NATURAL GAS INDUSTRIES |
| MIL-PRF-18148 Revision D:2009 | Connectors, Electrical, Aircraft Storage Battery General Specification for |
| MIL-STD-790 Revision G:2011 | Established Reliability and High Reliability Qualified Products List (QPL) Systems for Electrical, Electronic, and Fiber Optic Parts Specifications |
| MIL-DTL-5513 Revision D:2012 | Swivel Joint, Hydraulic |
| MIL-DTL-32435 Base Document:2013 | Hose, Polytetrafluoroethylene, Convoluted, 450 Degrees F, Medium Pressure |
| 11/30238890 DC : 0 | BS EN ISO 14998 - PETROLEUM AND NATURAL GAS INDUSTRIES - DOWN HOLE EQUIPMENT - COMPLETION ACCESSORIES |
| MIL-DTL-13625 Revision G:2017 | Switches, Pull; Switches, Push; Switches, Beam Selecting, Headlight: Electrical (28 Volts DC Maximum, for Military Vehicles) |
| MIL-DTL-3970 Revision F:2012 | WAVEGUIDE ASSEMBLIES, RIGID, GENERAL SPECIFICATION FOR |
| MIL-DTL-21097 Revision H:2017 | Connectors, Electrical, Printed Wiring Board, General Purpose General Specification for |
| MIL-STD-705 Revision D:2016 | Mobile Electric Power Systems |
| MIL-DTL-13241 Revision D:2010 | Wire, Electrical; Antenna, (Wire WS-12( )/U and Wire WS-13( )/U) (No S/S Document) |
| MIL-DTL-83296 Revision B:2009 | Fittings, Corrosion Resistant Steel, High Temperature, High Pressure (3000 PSI), Hydraulic and Pneumatic, General Specification for |
| DSCC 93004 : B | CONNECTOR, HIGH DENSITY, BLADE AND FORK, DAUGHTER BOARD, EIGHT ROW, 300 CONTACT, 8 FIBER OPTIC POSITIONS |
| MIL-DTL-28837 Revision D:2015 | Mixer Stages, Radio Frequency General Specification for |
| MIL-DTL-83298 Revision C:2009 | Hose, Conductive Polytetrafluoroethylene Tube, High Temperature, High Pressure (3000 PSI), Hydraulicand Pneumatic |
| MIL-DTL-49198 Revision B:2014 | Headset-Microphone Kit, MK-1564( )/AIC |
| MIL-PRF-15733 Revision J:2010 | Filters and Capacitors, Radio Frequency Interference, General Specification for |
| MIL-STD-1904 Revision B:2016 | Test Standards for Level A and Level B Packaging for Conventional Ammunition |
| MIL-DTL-13075 Revision C:2012 | Wire, Electrical (Wire W-124, W-125, W-128) (No S/S Document) |
| MIL-DTL-7703 Revision F:2010 | Guard, Switch, General Specification for |
| API 20C : 2015 | CLOSED DIE FORGINGS FOR USE IN THE PETROLEUM AND NATURAL GAS INDUSTRY |
| MIL-STD-202 Revision H:2015 | Electronic and Electrical Component Parts |
| MIL-DTL-75 Revision K:2007 | Electron Tubes, Packaging of |
| MIL-DTL-3702 Revision F:2012 | Cable, Power, Electrical: Ignition, High-Tension |
| MIL-DTL-6001 Revision B:2013 | Fittings; Aircraft, Solder Type, Tube |
| MIL-PRF-22 Revision E:2007 | Resistor, Variable, Wirewound, Power Type, General Specification for |
| MIL-DTL-32464 Revision A:2017 | Fittings, Adapter, Hydraulic and Pneumatic, 37 Degrees Spherical to ANPT Connectors, 1500 to 3000 PSI, General Specification for |
| MIL-DTL-32371 Base Document:2012 | Fittings, Adapter, Hydraulic and Pneumatic, Spherical to ORFS Connectors, 1500 to 3000 PSI, General Specification for |
| MIL-DTL-28754 Revision E:2016 | Connectors, Electrical, Modular, and Component Parts General Specification for |
| MIL-DTL-29606 Revision A:2010 | Wire, Electrical, Stranded, Uninsulated Copper, Copper Alloy, or Aluminum, or Thermocouple Extension, General Specification for (S/S by SAE-AS29606) |
| SAE AIR5919B | Alternatives to Cadmium Plating |
| SAE ARP81490A | Transmission Lines, Transverse Electromagnetic Mode |
| DSCC 04038 : D | WIRE, ELECTRICAL, COMPOSITE, POLYAMIDE BRAID, POLYTETRAFLUOROETHYLENE/POLYIMIDE INSULATED, SMOOTH SURFACE, NORMAL WEIGHT, NICKEL COATED, COPPER CONDUCTOR, 260 DEGREES C, 600 VOLT |
| DSCC 09004 : 0 | RESISTOR, CHIP, FIXED, FILM, PRECISION, TOP CONTACT, STYLE 2020 |
| DSCC 04037 : C | WIRE, ELECTRICAL, COMPOSITE, POLYAMIDE BRAID, POLYTETRAFLUOROETHYLENE/POLYIMIDE INSULATED, SMOOTH SURFACE, NORMAL WEIGHT, SILVER COATED, COPPER CONDUCTOR, 200 DEGREES C, 600 VOLT |
| I.S. EN ISO 14998:2013 | PETROLEUM AND NATURAL GAS INDUSTRIES - DOWNHOLE EQUIPMENT - COMPLETION ACCESSORIES (ISO 14998:2013) |
| ARINC 805 : 2014 | FIBER OPTIC TEST PROCEDURES |
| SAE AS81306A | Wiring Installation Tools for Bands and Tiedown Straps |
| SAE AS6021 | AS6021 Aerospace Fiber Optic Cable Assembly Drawing Specification |
| ASTM E 3024/E3024M : 2016 | Standard Practice for Magnetic Particle Testing for General Industry |
| ASTM F 3057 : 2016 : REDLINE | Standard Test Method for Electromagnetic Shielding Effectiveness of Glazings |
| DSCC 04042 : D | WIRE, ELECTRICAL, COMPOSITE, POLYTETRAFLUOROETHYLENE/POLYIMIDE INSULATED, SMOOTH SURFACE, NORMAL WEIGHT, TIN COATED, COPPER CONDUCTOR, 150 DEGREES C, 600 VOLT |
| MIL-DTL-13444 Revision H:2006 | Hose and Hose Assemblies, Rubber: Fuel and Oil |
| MIL-PRF-12934 Revision L:2009 | Resistor, Variable, Wirewound, Precision General Specification for |
| MIL-DTL-14055 Revision G:2014 | Cup, Hydraulic Brake Actuating Cylinder: Synthetic Rubber |
| MIL-DTL-18866 Revision J:2015 | Fittings, Hydraulic Tube, Flared, 37 Degree and Flareless, General Specification for |
| MIL-DTL-8794 Revision F:2007 | Hose, Synthetic Rubber - Hydraulic Fluid, Fuel, Coolant, and Oil Resistant, General Specification for |
| MIL-DTL-26482 Revision H:2007 | Connectors, Electrical, Circular, Miniature, Quick Disconnect, Environment Resisting, Receptacles and Plugs, General Specification for |
| FF-C-450 Revision G:2017 | Clamps, Wire Rope |
| BS EN ISO 17078-4:2010 | Petroleum and natural gas industries. Drilling and production equipment Practices for side-pocket mandrels and related equipment CD-ROM |
| MIL-PRF-87819 Revision B:2009 | Headset-Microphone, (Hearing Protective Type, High and Moderate Ambient Noise Levels), General Specification for |
| MIL-DTL-49292 Revision B:2006 | Cable Assemblies, Nonpressure Proof, Fiber Optic, Metric, General Specification for |
| MIL-DTL-5593 Revision E:2006 | Hose, Aircraft, Low Pressure Air and Vacuum, Flexible |
| MIL-DTL-6193 Revision E:2017 | Joints, Universal, Plain, Light and Heavy Duty, General Specification for |
| DSCC 04048 : C | WIRE, ELECTRICAL, COMPOSITE, POLYTETRAFLUOROETHYLENE/POLYIMIDE INSULATED, SMOOTH SURFACE, 26, 20, 18, 16 AWG, 600 VOLT |
| DSCC 97010 : C | RESISTOR, FIXED, FILM, PRECISION, 0.3 WATT, POWER CURVE B |
| MIL-STD-1311 Revision D:2011 | Test Methods for Electron Tubes |
| MIL-STD-202-217 Base Document:2015 | Method 217, Particle Impact Noise Detection (PIND) |
| ASTM E 2698 : 2010 | Standard Practice for Radiological Examination Using Digital Detector Arrays |
| MIL-DTL-6807 Revision F:2012 | Switches, Rotary, Selector Power, General Specification for |
| MIL-PRF-64266 Revision B:2016 | Connectors, Fiber Optic Circular and Rectangular, Plug and Receptacle Style, Multiple Removable Genderless Termini, Environment Resisting General Specification for |
| SAE ARP5812 | Actuators, Linear Mechanical, General Specification Guide |
| MIL-DTL-5898 Revision H:2012 | Cords, Electrical (WF-5/U, WF-14/U, WD-34/U, WM-53/U, WM-85/U) |
| MIL-DTL-32460 Revision A:2017 | Adapter, Hydraulic and Pneumatic, 37 Degree Flare Tube Fitting to O-Ring Face Seal Connectors, 1500 to 3000 PSI and -65 Degree F to 250 Degree F, General Specification for |
| MIL-DTL-83798 Revision D:2008 | Fitting, Rubber Hose, Lightweight, Medium Pressure, General Specification For |
| MIL-DTL-15291 Revision G:2013 | Switches, Rotary, Snap Action and Detent/Spring Return Action, General Specification for |
| MIL-DTL-8795 Revision G:2014 | Hose Assemblies, Elastomeric, Hydraulic, Fuel, Coolant, and Oil Resistant, General Specification for |
| DSCC 93006 : B | CONNECTOR, HIGH DENSITY, BLADE AND FORK, DAUGHTER BOARD, EIGHT ROW, 296 CONTACT, 2 POWER POSITIONS |
| MIL-STD-3004 Revision D:2014 | Quality Assurance/Surveillance for Fuels, Lubricants and Related Products (S/S by MIL-STD-3004-1 and MIL-STD-3004-2) |
| DSCC 97011 : C | RESISTOR, FIXED, FILM, PRECISION, 0.15 WATT, POWER CURVE B |
| MIL-PRF-23269 Revision H:2016 | Capacitor, Fixed, Glass Dielectric,General Specification for |
| MIL-DTL-55181 Revision F:2012 | Connectors, Plug and Receptacle, Intermediate Power (Electrical, Waterproof), Type MW, General Specification for |
| MIL-PRF-49465 Revision C:2007 | Resistor, Fixed, Metal Element, Power Type, Very Low Resistance Values, General Specification for |
| DSCC 04041 : D | WIRE, ELECTRICAL, COMPOSITE, POLYTETRAFLUOROETHYLENE/POLYIMIDE INSULATED, SMOOTH SURFACE, NORMAL WEIGHT, NICKEL COATED, COPPER CONDUCTOR, 260 DEGREES C, 600 VOLT |
| MIL-PRF-83446 Revision D:2015 | Coils, Radio Frequency, Chip, Fixed or Variable, General Specification for |
| MIL-PRF-26 Revision H:2006 | Resistor, Fixed, Wirewound (Power Type) General Specification for |
| SAE AS6173 | Cutting Tools, Wire, Electrical, General Specification For |
| SAE AS22759C | Wire, Electrical, Fluoropolymer-Insulated, Copper or Copper Alloy |
| MIL-DTL-2486 Revision E:2009 | Cable, Special Purpose, Electrical WM-46/U |
| MIL-DTL-287 Revision J:2012 | Waveguide Assemblies, Flexible, Twistable and Non-Twistable, General Specification for |
| MIL-PRF-19500 Revision P:2010 | Semiconductor Devices, General Specification for |
| MIL-DTL-13273 Revision C:2012 | Cord, Electrical, (Retractile, 2, 3, and 4 Conductor, WD-9/U, WT-2/U, WF-4/U) |
| MIL-DTL-13276 Revision C:2009 | Wire, Electrical; Antenna, (Wire W-28) (No S/S Document) |
| MIL-DTL-13777 Revision L:2014 | Cable, Special Purpose, Electrical, General Specification for |
| MIL-PRF-22097 Revision J:2007 | Resistor, Variable, Nonwirewound, (Adjustment Type), General Specification for |
| MIL-DTL-24211 Revision D:2016 | Gaskets, Waveguide Flange General Specification For |
| MIL-PRF-39019 Revision F:2010 | Circuit Breakers, Magnetic, Low-Power Sealed, Trip-Free General Specification for |
| MIL-DTL-20176 Revision H:2014 | Hose and Hose Assembly, Rubber, Smooth Bore, Light-Weight Sewage Discharge and Oily Waste Discharge |
| API 19G4 : 2011 | PRACTICES FOR SIDE-POCKET MANDRELS AND RELATED EQUIPMENT |
| I.S. EN ISO 28781:2010 | PETROLEUM AND NATURAL GAS INDUSTRIES - DRILLING AND PRODUCTION EQUIPMENT - SUBSURFACE BARRIER VALVES AND RELATED EQUIPMENT |
| MIL-DTL-27516 Revision G:2011 | Hose and Hose Assembly, Nonmetallic, Suction and Discharge |
| SAE ARP6178 | Fraudulent/Counterfeit Electronic Parts; Tool for Risk Assessment of Distributors |
| SAE AS81824D | Splice, Electric, Crimp, Copper, Environment Resistant |
| SAE AS7510 | Coupling Assembly, Threadless, Flexible, Self-Locking, Fixed Cavity, High Conductivity, Self-Bonding, Part Specification |
| DSCC 04045 : D | WIRE, ELECTRICAL, COMPOSITE, POLYTETRAFLUOROETHYLENE/POLYIMIDE INSULATED, SMOOTH SURFACE, LIGHT WEIGHT, SILVER COATED, COPPER CONDUCTOR, 200 DEGREES C, 600 VOLT |
| API 20B : 2013 | OPEN DIE SHAPED FORGINGS FOR USE IN THE PETROLEUM AND NATURAL GAS INDUSTRY |
| DSCC 04043 : D | WIRE, ELECTRICAL, COMPOSITE, POLYTETRAFLUOROETHYLENE/POLYIMIDE INSULATED, SMOOTH SURFACE, NORMAL WEIGHT, SILVER COATED, HIGH STRENGTH OR ULTRA HIGH STRENGTH COPPER ALLOY, 200 DEGREES C, 600 VOLT |
| SAE AS23190C | Wiring, Positioning, and Support Accessories |
| MIL-PRF-32560 Base Document:2016 | Coil, Radio Frequency, Surface Mount, Fixed Established Reliability, General Specification for (No S/S Document) |
| SAE AS95234 | Connectors, Electrical, Reverse Bayonet, General Specification For |
| API 19V : 2013 | SUBSURFACE BARRIER VALVES AND RELATED EQUIPMENT |
| ASTM E 1742/E1742M : 2018 : REDLINE | Standard Practice for Radiographic Examination |
| ISO 17078-4:2010 | Petroleum and natural gas industries — Drilling and production equipment — Part 4: Practices for side-pocket mandrels and related equipment |
| NASA KSC E 165 : 2009 | ELECTRICAL GROUND SUPPORT EQUIPMENT FABRICATION, SPECIFICATION FOR |
| NASA MSFC SPEC 3635 : 2012 | PYROTECHNIC SYSTEM SPECIFICATION |
| MIL-STD-981 Revision C:2010 | Design, Manufacturing and Quality Standards for Custom Electromagnetic Devices for Space Applications |
| NASA HDBK 8739.19-2 : 2010 | MEASURING AND TEST EQUIPMENT SPECIFICATIONS - NASA MEASUREMENT QUALITY ASSURANCE HANDBOOK - ANNEX 2 |
| NASA HDBK 8739.19-4 : 2010 | ESTIMATION AND EVALUATION OF MEASUREMENT DECISION RISK - NASA MEASUREMENT QUALITY ASSURANCE HANDBOOK - ANNEX 4 |
| DSCC 04034 : C | WIRE, ELECTRICAL, COMPOSITE, POLYTETRAFLUOROETHYLENE/POLYIMIDE INSULATED, SMOOTH SURFACE, LIGHT WEIGHT, COPPER CONDUCTOR, TIN COATED, 150 DEGREES C, 600 VOLT |
| MIL-DTL-28840 Revision D:2013 | Connectors, Electrical, Circular, Threaded, High Shock, High Density, Shipboard, Class D, General Specification For |
| MIL-DTL-27599 Revision E:2016 | Connectors, Electrical, Circular, Miniature, High Density, Quick Disconnect, Environment Resistant, Solder Contacts, General Specification for |
| MIL-DTL-55302 Revision G:2009 | Connectors, Printed Circuit Subassembly and Accessories |
| MIL-DTL-13220 Revision G:2015 | Hook, Slip (for use with Wire Rope or Chains) |
| MIL-DTL-52525 Revision F:2008 | Fittings, Hose, Hydraulic, Reusable, Field-Attachable and Clamp-Halves, to Mate with SAE-J517 Type Hoses, General Specification for |
| MIL-DTL-12211 Revision G:2009 | Switch, Pressure |
| MIL R 5757 : K | RELAYS, ELECTROMAGNETIC, GENERAL SPECIFICATION FOR |
| MIL-DTL-32434 Base Document:2013 | Hose Assembly, Polytetrafluoroethylene, Convoluted, High Temperature, Medium Pressure, General Specification for |
| MIL-DTL-83723 Revision H:2016 | Connectors, Electrical, Circular, Environment Resisting and Hermetically Sealed, Receptacles and Plugs, General Specification for |
| MIL-DTL-62422 Revision D:2010 | Filter, Laser Hazard Protection |
| DSCC 97009 : C | RESISTOR, FIXED, FILM, PRECISION, 0.3 WATT, POWER CURVE A |
| MIL-DTL-9177 Revision C:2014 | Connector, Audio, Airborne, General Specification for |
| MIL-PRF-38535 Revision K:2013 | Integrated Circuits (Microcircuits) Manufacturing, General Specification for |
| MIL-DTL-24308 Revision G:2009 | Connectors, Electric, Rectangular, Nonenvironmental, Miniature, Polarized Shell, Rack and Panel, General Specification for |
| MIL-DTL-52618 Revision F:2012 | Fittings, Pipe, Aluminum-Alloy Threaded, 150-Pound, General Specification for |
| SAE ARP5448/3A | Plain Bearing Low Speed Oscillation Test |
| MIL-DTL-10392 Revision F:2012 | Cord, Electrical (Audio, Miniature) |
| MIL-DTL-25955 Revision A:2004 | Connectors, Electrical, Environment Resisting, Miniature, with Snap-in Contacts (No S/S Document) |
| MIL-C-11015 Revision F:2008 | Capacitor, Fixed, Ceramic Dielectric (General Purpose), General Specification for |
| MIL-PRF-23648 Revision F:2005 | Resistor, Thermal (Thermistor) Insulated, General Specification for |
| MIL-DTL-22931 Revision D:2013 | Cables, Radio Frequency, Semirigid, Coaxial, Semi-Air-Dielectric, General Specification for |
| MIL-DTL-83739 Revision D:2012 | Switches, Antenna, Radio Frequency, Solid-State, General Specification for |
| MIL-PRF-15305 Revision F:2013 | Coils, Electrical, Fixed and Variable, Radio Frequency General Specification for |
| MIL-DTL-8416 Revision C:2005 | Adapter, Headset-Microphone MX- 1646( )/AIC (No S/S Document) |
| SAE AS60491 | Sleeve, Protection, For Cable and Harness Protection |
| MIL-DTL-52471 Revision F:2008 | Hose and Hose Assemblies, Rubber, Hydraulic Pressure Type, General Specification for |
| MIL-R-83516 Revision C:2017 | Relays, Reed, Dry, General Specification for (No S/S Document) |
| IEEE 1309-2013 REDLINE | IEEE Standard for Calibration of Electromagnetic Field Sensors and Probes (Excluding Antennas) from 9 kHz to 40 GHz |
| MIL-PRF-19 Revision E:2007 | Resistor, Variable, Wirewound (Low Operating Temperature), General Specification for |
| MIL-PRF-39023 Revision D:2006 | Resistor, Variable, Nonwirewound, Precision, General Specification for |
| MIL-PRF-11693 Revision E:2012 | Capacitor, Feed Through, Radio-Interference Reduction, DC (Hermetically Sealed in Metal Cases), Established and Non-Established Reliability General Specification for |
| MIL-DTL-49055 Revision G:2017 | Cables, Power, Electrical, (Flexible, Flat, Unshielded), (Round Conductor), General Specification for |
| MIL-DTL-38359 Revision E:2011 | Cable, Power, Electrical, Airport Lighting, Cross-Linked, Polyethylene (XLP) |
| MIL-PRF-83401 Revision H:2006 | Resistor Networks, Fixed, Film and Capacitor-Resistor Networks, Ceramic Capacitor and Fixed, Film, Resistors, General Specification for |
| MIL-DTL-55535 Revision A:2007 | Headset-Microphone Kit MK-1039/G |
| MIL-DTL-45300 Revision C:2011 | Cap, Fuel Tank: for Military Combat and Tactical Transport Vehicles |
| DSCC 04047 : D | WIRE, ELECTRICAL, COMPOSITE, POLYTETRAFLUOROETHYLENE/POLYIMIDE INSULATED, SMOOTH SURFACE, 30, 28, 26 AWG, 600 VOLT |
| MIL-DTL-13074 Revision D:2016 | Wire, Electrical, Antenna, (Wire W-27 and Wire WS-19( ) /U) |
| MIL-DTL-24251 Revision F:2013 | Shields, Retainers (Bases), and Adapters, Electron Tube, Heat Dissipating |
| WW-P-460 Revision F:2015 | Pipe Fittings; Brass or Bronze (Threaded), Classes 125 and 250 Pound |
| DSCC 02001 : A | RESISTOR, FIXED, FILM, PRECISION, CHIP 1/8 WATT, STYLE 2012 |
| MIL-DTL-26500 Revision G:2011 | Connectors, General Purpose, Electrical, Miniature, Circular, Environment Resisting or Hermetically Sealed, General Specification for |
| MIL-DTL-83733 Revision E:2006 | Connectors, Electrical Miniature, Rectangular Type, Rack to Panel, Environment Resisting, 200 Degrees C Total Continuous Operating Temperature, General Specification For |
| MIL-DTL-83507 Revision A:2017 | Tool Kits, Electrical Connectors, Contacts, and Connector and Cable Accessories, General Specification for |
| MIL-DTL-5070 Revision F:2006 | Adapter, Hose to Tube, Pipe and Flange, Reusable - Hydraulic, Fuel, and Oil Lines, General Specification for |
| DSCC 04049 : D | CABLE, POWER, ELECTRICAL AND SPECIAL PURPOSE, SHIELDED AND UNSHIELDED, ELECTRICAL, COMPOSITE WIRE, POLYTETRAFLUOROETHYLENE/POLYIMIDE INSULATED |
| MIL-DTL-11040 Revision G:2009 | Belt, V: Engine Accessory Drive, General Specification for (S/S by A-A-52155) |
| MIL-C-18312 Revision G:2013 | Capacitor, Fixed, Metallized (Paper-Plastic, or Plastic Film) Dielectric, Direct Current (Hermetically Sealed in Metal Cases), General Specification for (For Future Acquisitions, Use: MIL-PRF-39022) |
| MIL-PRF-18546 Revision G:2004 | Resistor, Fixed, Wirewound (Power Type, Chassis Mounted), General Specification for |
| MIL-DTL-8789 Revision G:2015 | Fitting End, Attachable, Hydraulic, High Pressure (3,000 PSI), General Specification for |
| DSCC 93009 : B | CONNECTOR, HIGH DENSITY, BLADE AND FORK, BACKPANEL, EIGHT ROW, 356 CONTACT, WITH SAFETY GROUND |
| DSCC 86100 : D | CONNECTORS, ELECTRICAL, UNSHROUDED HEADERS, PWB TERMINATION |
| SAE AS85485B | Cable, Electric, Filter Line, Radio Frequency Absorptive |
| DSCC 86037 : B | CONNECTORS, RECEPTACLE, ELECTRICAL, LATCH HOUSINGS, CRIMP TO WIRE CONTACTS, GENERAL DRAWING FOR |
| API 20C CHINESE : 2009 | CLOSED DIE FORGINGS FOR USE IN THE PETROLEUM AND NATURAL GAS INDUSTRY |
| SAE ARP5483/4A | Rolling Element Test Method for Axial Limit and Fracture Load Testing |
| ASTM E 2033 : 2017 : REDLINE | Standard Practice for Radiographic Examination Using Computed Radiography (Photostimulable Luminescence Method) |
| ASTM A 1100 : 2016 | Standard Guide for Qualification and Control of Induction Heat Treating |
| ASTM E 3022 : 2015 | Standard Practice for Measurement of Emission Characteristics and Requirements for LED UV-A Lamps Used in Fluorescent Penetrant and Magnetic Particle Testing |
| SAE AS50151C | Connectors, Electrical, Circular Threaded, AN Type, General Specification For |
| ASTM E 2593 : 2017 : REDLINE | Standard Guide for Accuracy Verification of Industrial Platinum Resistance Thermometers |
| ISO 14998:2013 | Petroleum and natural gas industries — Downhole equipment — Completion accessories |
| EN ISO 14998:2013 | Petroleum and natural gas industries - Downhole equipment - Completion accessories (ISO 14998:2013) |
| EN ISO 17078-4:2010 | Petroleum and natural gas industries - Drilling and production equipment - Part 4: Practices for side-pocket mandrels and related equipment (ISO 17078-4:2010) |
| EN ISO 28781:2010 | Petroleum and natural gas industries - Drilling and production equipment - Subsurface barrier valves and related equipment (ISO 28781:2010) |
| MIL-PRF-10304 Revision F:1999 | Meters, Electrical Indicating, Panel Type, Ruggedized, General Specification for |
| DSCC 04044 : D | WIRE, ELECTRICAL, COMPOSITE, POLYTETRAFLUOROETHYLENE/POLYIMIDE INSULATED, SMOOTH WEIGHT, NORMAL WEIGHT, NICKEL COATED, HIGH STRENGTH OR ULTRA HIGH STRENGTH COPPER ALLOY, 260 DEGREES C, 600 VOLT |
| MIL-DTL-3992 Revision F:2007 | Hose and Hose Assembly, Rubber, Air and Vacuum Brake, Systems |
| MIL-PRF-83530 Revision C:2008 | Resistor, Voltage Sensitive (Varistor, Metal-Oxide), General Specification for |
| MIL-DTL-26516 Revision A:2015 | Cap, Lubrication Fitting, Protective General Specification for |
| MIL-DTL-25547 Revision C:2002 | Loudspeaker, Permanent Magnet LS-211/AIC-13 (No S/S Document) |
| MIL-PRF-83287 Revision G:2007 | Indicators, Fault Locating, General Specification for |
| IEEE C37.242-2013 | IEEE Guide for Synchronization, Calibration, Testing, and Installation of Phasor Measurement Units (PMUs) for Power System Protection and Control |
| MIL-PRF-83536 Revision F:2017 | Relays, Electromagnetic, Established Reliability, 25 Amperes and Below, General Specification for |
| MIL-DTL-55288 Revision E:2012 | Antenna AS-1729/VRC |
| MIL-DTL-28804 Revision D:1998 | Connectors, Plug and Receptacle, Electric, Rectangular, High Density, Polarization Center Jackscrew General Specification for |
| MIL-DTL-5757 Revision N:2017 | Relays, Electromagnetic, General Specification for |
| SAE AS6070 | Aerospace Cable, High Speed Data, Copper |
| MIL-DTL-55668 Revision D:2009 | Cord, Electrical; Audio, Subminiature (Retractile and Straight) |
| MIL-DTL-24215 Revision E:2015 | Attenuators, Variable (Coaxial), General Specification for |
| MIL R 19365 : E | RESISTOR, ADJUSTABLE, WIREWOUND, POWER |
| MIL-PRF-22684 Revision F:2006 | Resistor, Fixed, Film (Insulated) General Specification for |
| MIL-PRF-38534 Revision K:2017 | Hybrid Microcircuits, General Specification for |
| MIL-DTL-26521 Revision L:2014 | Hose Assembly, Nonmetallic, Fuel, Collapsible, Low Temperature with Non-Reusable Couplings |
| MIL-DTL-15119 Revision B:2012 | Tubing, Round, Seamless Alloy Steel |
| MIL R 93 : F | RESISTORS, FIXED, WIRE-WOUND (ACCURATE), GENERAL SPECIFICATION FOR |
| MIL-DTL-442 Revision G:2012 | Cable, (Wire), Two Conductor, Parallel |
| MIL-DTL-438 Revision C:2010 | Wire; Primer, Electrical (No S/S Document) |
| MIL-DTL-28875 Revision C:2012 | Amplifiers, Radio-Frequency and Microwave, Solid-State, General Specification for |
| MIL-DTL-3432 Revision J:2009 | Cables, (Power and Special Purpose) and Wire, Electrical (300 and 600 Volts) |
| MIL-DTL-38159 Revision D:2015 | Connectors, Electric, Ramp Power, 416/240 Volts |
| DSCC 04037 D : 2019 | WIRE, ELECTRICAL, COMPOSITE, POLYAMIDE BRAID, POLYTETRAFLUOROETHYLENE/POLYIMIDE INSULATED, SMOOTH SURFACE, NORMAL WEIGHT, SILVER COATED, COPPER CONDUCTOR, 200 DEGREES C, 600 VOLT |
| MIL-DTL-83505 Revision C:2017 | Sockets, (Lead, Electronic Components) General Specification for |
| MIL-PRF-1 Revision N:2011 | Electron Tubes General Specification for |
| MIL-DTL-12995 Revision E:2012 | Wire, Electrical, Antenna (Wire, W-120) |
| API SPEC 19AC : 2016 | SPECIFICATION FOR COMPLETION ACCESSORIES |
| IEEE/ANSI C63.5-2017 | American National Standard for Electromagnetic Compatibility--Radiated Emission Measurements in Electromagnetic Interference (EMI) Control--Calibration and Qualification of Antennas (9 kHz to 40 GHz) |
| SAE AS81703A | Connectors, Electric, Circular, Miniature, Rack and Panel or Push-Pull Coupling, Environment Resisting |
| API STD 20M : 2017 | QUALIFICATION OF SUPPLIERS OF MACHINING SERVICES FOR USE IN THE PETROLEUM AND NATURAL GAS INDUSTRIES |
| DSCC 93008 : B | CONNECTOR, HIGH DENSITY, BLADE AND FORK, DAUGHTER BOARD, EIGHT ROW, 356 CONTACT, WITH SAFETY GROUND |
| DSCC 04035 : A13032009 | WIRE, ELECTRICAL, COMPOSITE, POLYTETRAFLUOROETHYLENE/POLYIMIDE INSULATED, SMOOTH SURFACE, LIGHT WEIGHT, SILVER COATED, HIGH STRENGTH OR ULTRA HIGH STRENGTH COPPER ALLOY, 200 DEGREES C, 600 VOLT |
| SAE AS85049D | Connector Accessories, Electrical General Specification For |
| DSCC 89088 : F | RESISTOR, FIXED, FILM, PRECISION, 0.1 WATT, POWER CURVE C |
| ASHRAE 41.3 : 2014 | METHODS FOR PRESSURE MEASUREMENT |
| ISO 28781:2010 | Petroleum and natural gas industries — Drilling and production equipment —Subsurface barrier valves and related equipment |
| DSCC 89065 : C | GENERAL SPECIFICATION FOR HIGH PERFORMANCE, HIGH DENSITY, TWO PIECE, PRINTED CIRCUIT BOARD CONNECTOR |
| ASME B89.7.1 : 2016 | GUIDELINES FOR ADDRESSING MEASUREMENT UNCERTAINTY IN THE DEVELOPMENT AND APPLICATION OF ASME B89 STANDARDS |
| DSCC 03024 : C | SHIELDING BEAD, ELECTRONIC, CHIP, FERRITE, HIGH RELIABILITY |
Summarise
US$135.90
Excluding Tax where applicable
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.