• There are no items in your cart

AS 1397-2011

AvailableSuperseded

AvailableSuperseded

An Available Superseded Standard is one, which has been made available for a period of time although it has been formally superseded by another Standard. Its availability is maintained where it is referenced in legislation/regulations or in other Standards and its use should be restricted to where so referenced. No responsibility is taken by Intertek Inform as to the ongoing technical validity of such a Standard, the responsibility resting with the referencing authority.

Continuous hot-dip metallic coated steel sheet and strip - Coatings of zinc and zinc alloyed with aluminium and magnesium

Available format(s)

Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users

Published date

09-15-2011

Preview

Specifies requirements for continuously hot-dip metallic coated sheet steel and strip supplied in thicknesses up to and including 5.0mm.

Committee
MT-001
DocumentType
Standard
ISBN
978 0 7337 9925 9
Pages
28
PublisherName
Standards Australia
Status
AvailableSuperseded
SupersededBy
Supersedes
UnderRevision

This Standard specifies requirements for continuously hot-dip metallic coated sheet steel and strip supplied in thicknesses up to and including 5.0 mm.Requirements for product conformity to this Standard are given in Appendix B.Requirements covered in this Standard are as follows:Formability grades of steel.Structural grades of steel.Classes of zinc coating, including differential coatings.Classes of zinc coating converted to zinc/iron alloy.Classes of zinc/aluminium coatings.Classes of zinc/aluminium/magnesium alloy coating.Classes of aluminium/zinc alloy coating.Classes of aluminium/zinc/magnesium alloy coating.Surface finish.Advice and recommendations on information to be supplied by the purchaser at the time of enquiry or order are contained in Appendix A.The specified requirements apply to the full length and full width of the product supplied, unless otherwise indicated.Within the description of the classes of coatings, the majority element present is listed first, followed by the next major element and followed by a third element if appropriate.

First published as part of AS A20-1934.Second edition 1947.Revised and redesignated in part as AS G24-1967.Revised and redesignated as AS 1397-1973.Second edition 1977.Third edition 1984.Fourth edition 1993.Fifth edition 2001. Originated as part of AS A20-1934. Previous edition AS1397-2001. Sixth edition 2011. Reissued incorporating Amendment No. 1 (October 2012).

AS 1391-2007 Metallic materials - Tensile testing at ambient temperature (Reconfirmed 2017)
AS/NZS 1050.39:1994 Methods for the analysis of iron and steel Determination of chromium content - Flame atomic absorption spectrometric method (Reconfirmed 2016)
AS/NZS 1050.38:1994 Methods for the analysis of iron and steel Determination of vanadium content - Flame atomic absorption spectrometric method (Reconfirmed 2016)
AS/NZS 1050.24:1994 Methods for the analysis of iron and steel Determination of aluminium content - Spectrophotometric method (Reconfirmed 2016)
AS 1199.2-2003 Sampling procedures for inspection by attributes Sampling plans indexed by limiting quality (LQ) for isolated lot inspection (Reconfirmed 2016)
AS/NZS 4680:2006 Hot-dip galvanized (zinc) coatings on fabricated ferrous articles (Reconfirmed 2017)
AS 1199.4-2003 Sampling procedures for inspection by attributes Procedures for assessment of declared quality levels (Reconfirmed 2016)
AS/NZS 1365:1996 Tolerances for flat-rolled steel products (Reconfirmed 2016)
AS/NZS 1050.26:1994 Methods for the analysis of iron and steel Silicon in iron and steel - Spectrophotometric method (Reconfirmed 2016)
AS 1199.3-2003 Sampling procedures for inspection by attributes Skip-lot sampling procedures (Reconfirmed 2016)
AS 2706-2003 Numerical values - Rounding and interpretation of limiting values (Reconfirmed 2018)
AS/NZS 1050.28:1994 Methods for the analysis of iron and steel Vanadium in steel - Potentiometric method (Reconfirmed 2016)
AS/NZS 1050.18:1994 Methods for the analysis of iron and steel Determination of phosphorus - Spectrophotometric method (Reconfirmed 2016)
AS/NZS 1050.8:1994 Methods for the analysis of iron and steel Determination of manganese content - Spectrophotometric method (Reconfirmed 2016)
AS 1397-2001 Steel sheet and strip - Hot-dipped zinc-coated or aluminium/zinc-coated
AS/NZS 1050.37:1994 Methods for the analysis of iron and steel Determination of copper content - Flame atomic absorption spectrometric method (Reconfirmed 2016)
AS/NZS 1050.6:1995 Methods for the analysis of iron and steel Determination of tin content - Flame atomic absorption spectrometric method (Reconfirmed 2016)
AS/NZS 1050.14:1994 Methods for the analysis of iron and steel Determination of manganese in iron and steel - Titrimetric method
AS 2505.1-2004 Metallic materials Sheet, strip and plate - Bend tests
AS/NZS 1050.21:1994 Methods for the analysis of iron and steel Determination of cobalt content - Spectrophotometric method (Reconfirmed 2016)
AS 1199.0-2003 Sampling procedures for inspection by attributes Introduction to the ISO 2859 attribute sampling system (Reconfirmed 2016)
AS 2490-1997 Sampling procedures and charts for inspection by variables for percent nonconforming
AS/NZS 1050.2:1994 Methods for the analysis of iron and steel Determination of carbon content - Gravimetric method (Reconfirmed 2016)
AS/NZS 1050.27:1994 Methods for the analysis of iron and steel Determination of titanium content - Spectrophotometric method (Reconfirmed 2016)
AS 2331.2.3-2001 Methods of test for metallic and related coatings Tests for average coating mass per unit area or for thickness - Hydrogen evolution method for zinc coatings
AS/NZS 1050.1:1996 Methods for the analysis of iron and steel Sampling iron and steel for chemical analysis
AS 2331.2.1-2001 Methods of test for metallic and related coatings Tests for average coating mass per unit area or for thickness - Dissolution methods - Strip and weigh, and analytical
AS/NZS 1050.16:1994 Methods for the analysis of iron and steel Determination of sulfur content - Infrared absorption method after combustion in an induction furnace (Reconfirmed 2017)
AS/NZS 1050.31:1994 Methods for the analysis of iron and steel Determination of niobium content - PAR spectrophotometric method (Reconfirmed 2016)
AS/NZS 1050.32:1994 Methods for the analysis of iron and steel Determination of carbon content - Infrared method (Reconfirmed 2017)
AS/NZS 1050.30:1994 Methods for the analysis of iron and steel Determination of boron content - Curcumin spectrophotometric method
AS 1199.1-2003 Sampling procedures for inspection by attributes Sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection (Reconfirmed 2016)
AS/NZS 1050.20:1994 Methods for the analysis of iron and steel Determination of magnesium content - Flame atomic absorption spectrometric method (Reconfirmed 2016)

AS 2699.2:2020 Built-in components for masonry construction Connectors and accessories
AS 2304:2019 Water storage tanks for fire protection systems
AS/NZS 3500.4:2015 Plumbing and drainage Heated water services
AS/NZS 1577:2013 Scaffold decking components
AS/NZS 4600:2018 Cold-formed steel structures
AS 1445-2013 Hot-dipped zinc-coated, aluminium/zinc-coated or aluminium/zinc/magnesium-coated steel sheet - 76 mm pitch corrugated
AS 4312:2019 Atmospheric corrosivity zones in Australia
AS/NZS 3500.5:2012 Plumbing and drainage Housing installations
AS/NZS 3500.5:2012 Plumbing and drainage Housing installations
AS/NZS 2728:2013 Prefinished/prepainted sheet metal products for interior/exterior building applications - Performance requirements
AS 1562.1:2018 Design and installation of metal roof and wall cladding Metal
AS 3700:2018 Masonry Structures
AS/NZS 5601.2:2020 Gas installations LP Gas installations in caravans and boats for non-propulsive purposes
AS 4285:2019 Rooflights
AS 2699.1:2020 Built-in components for masonry construction Wall ties
AS/NZS 5601.1:2013 Gas installations General installations
AS 4254.2-2012 Ductwork for air-handling systems in buildings Rigid duct
AS 2699.3:2020 Built-in components for masonry construction Lintels and shelf angles (durability requirements)
AS/NZS 1577:2018 Scaffold decking components
AS/NZS 5601.2:2013 Gas installations LP Gas installations in caravans and boats for non-propulsive purposes
AS/NZS 2589:2017 Gypsum linings - Application and finishing
AS/NZS 2327:2017 Composite structures - Composite steel-concrete construction in buildings
AS 1743:2018 Road signs - Specifications
AS/NZS 5131:2016 Structural steelwork - Fabrication and erection
AS 3864.1-2012 Medical refrigeration equipment - For the storage of blood and blood products Manufacturing requirements
AS 2050:2018 Installation of Roof Tiles

View more information
US$56.94
Excluding Tax where applicable

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.