• There are no items in your cart

AS 1631-1994

Current
Current

The latest, up-to-date edition.

Cast grey and ductile iron non-pressure pipes and fittings (Reconfirmed 2018)
Available format(s)

Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users

Language(s)

English

Published date

06-14-1994

Preview

1 - AS 1631-1994 CAST GREY AND DUCTILE IRON NON-PRESSURE PIPES AND FITTINGS
4 - PREFACE
5 - CONTENTS
6 - 1 SCOPE
6 - 2 REFERENCED DOCUMENTS
7 - 3 DEFINITIONS
7 - 3.1 Blank end fitting
7 - 3.2 Coating
7 - 3.3 Component
7 - 3.4 Effective length
7 - 3.5 Fettling
7 - 3.6 Finish
7 - 3.7 Left-hand or right-hand fitting
7 - 3.8 Lipped joint
7 - 3.9 Lining
7 - 4 MATERIAL
8 - 5 DESIGN OF FITTINGS
8 - 5.1 General
8 - 5.2 Connection ends
8 - 6 DIMENSIONS OF PIPES AND FITTINGS
8 - 6.1 Diameter and thickness
8 - 6.2 Length of pipes
8 - 6.3 Overflow relief fittings
9 - 7 MANUFACTURE AND FINISH
9 - 7.1 Quality of metal
9 - 7.2 Mode of casting
9 - 7.3 Heat treatment
9 - 7.4 Finish
9 - 8 STRAIGHTNESS
9 - 9 HYDROSTATIC PRESSURE TEST
9 - 9.1 Pipes and fittings
9 - 9.2 Jointing systems
9 - 9.3 Reflux valve
9 - 10 JOINT DESIGN AND MATERIALS
9 - 10.1 General
10 - 10.2 Caulked or elastomeric-ring joints
10 - 10.3 Bolted gland joints
11 - 10.4 Lipped joints
11 - 11 INSPECTION OPENINGS
13 - 12 TEST OPENINGS
13 - 13 SADDLE FITTINGS
13 - 14 COATING AND LINING
13 - 14.1 General
13 - 14.2 Coatings
14 - 14.3 Linings
14 - 14.4 Handling
14 - 15 MARKING
14 - 15.1 Marking requirements
15 - 15.2 Certification mark
15 - 15.3 Components
16 - APPENDIX A - INFORMATION TO BE SUPPLIED WITH ORDER
17 - APPENDIX B - TYPICAL DESIGNS OF CAST IRON NON-PRESSURE PIPE FITTINGS
22 - APPENDIX C - PROCEDURE FOR CEMENT MORTAR LINING
22 - C1 GENERAL
22 - C2 PROPORTIONING OF MATERIALS
22 - C3 MEASUREMENT AND MIXING OF MATERIALS
22 - C4 PIPE OR FITTING SURFACE
22 - C5 APPLICATION
23 - C6 THICKNESS
23 - C7 FINISH
23 - C8 REPAIR OF DEFECTS
23 - C9 CURING OF CEMENT MORTAR LININGS
23 - C10 RELINING
24 - APPENDIX D - MEANS FOR DEMONSTRATING COMPLIANCE WITH THIS STANDARD
24 - D1 SCOPE
24 - D2 STATISTICAL SAMPLING
24 - D3 PRODUCT CERTIFICATION
24 - D4 SUPPLIER’S QUALITY SYSTEM
25 - D5 OTHER MEANS OF ASSESSMENT

Specifies performance and general requirements for grey and ductile cast iron pipes and fittings up to nominal size DN 300 intended to be used where internal working pressure is considered negligible. An Appendix illustrates preferred designs of pipe fittings.

This Standard specifies requirements for cast grey iron (flake graphite) and ductile iron non-pressure pipes and fittings up to nominal size DN 300, and intended to be used where the internal working pressure is negligible.Where resistance to internal pressure is of prime importance, reference should be made to AS 2280, AS 2544 and AS 1724.NOTE: Guidelines on information that should be provided by the purchaser or agreed upon at the time of enquiry or order are given in Appendix A. Typical designs of fittings are given in Appendix B.

Committee
WS/5
DocumentType
Standard
ISBN
0 7262 8884 5
Pages
20
ProductNote
Reconfirmed 21/09/2018.
This standard has been reconfirmed in Australia in 2018 and remains current in New Zealand. Reconfirmation Notice 21/09/2018
PublisherName
Standards Australia
Status
Current
Supersedes

First published as AS A88-1959.
Revised and redesignated in part as AS A88.1-1970 and AS A88.2-1970.
AS A88.1-1970 and AS A88.2-1970 revised, amalgamated and redesignated AS 1631-1974.
Second edition 1994.
Reconfirmed 2018. First published as AS A88-1959. Revised and redesignated in part as AS A88.1-1970 and AS A88.2-1970. AS A88.1-1970 and AS A88.2-1970 revised, amalgamated and redesignated AS 1631-1974. Second edition 1994.

AS 1830-2007 Grey cast iron (Reconfirmed 2017)
AS 1831-2007 Ductile cast iron (Reconfirmed 2017)
AS 1349-1986 Bourdon tube pressure and vacuum gauges (Reconfirmed 2018)
AS 1199-1988 Sampling procedures and tables for inspection by attributes
AS 1646-1992 Elastomeric seals for waterworks purposes
AS 2544-1982 Grey iron pressure pipes and fittings
AS 3855-1994 Suitability of plumbing and water distribution systems products for contact with potable water
AS 1724.2-1983 Grey iron pressure pipes and fittings with bolted gland joints - Soft metric series for maintenance purposes
AS 1831-1985 Iron castings - Spheroidal or nodular graphite cast iron
AS 2345-2006 Dezincification resistance of copper alloys
AS 1646-2007 Elastomeric seals for waterworks purposes (Reconfirmed 2018)
AS 3501-1987 Parallel screw threads of whitworth form (BSW and BSF) and associated gauges and gauging practice (Reconfirmed 2017)
AS 1399-1990 Guide to AS 1199 - Sampling procedures and tables for inspection by attributes
AS/NZS 2544:1995 Grey iron pressure fittings
AS 3904.1-1987 Quality management and quality system elements Guidelines
AS 1789-1984 Electroplated coatings - Zinc on iron or steel
AS 1724-1975 Cast grey iron pressure pipes and fittings with bolted gland joints
AS 1789-2003 Electroplated zinc (electrogalvanized) coatings on ferrous articles (batch process) (Reconfirmed 2017)
AS 3972-1997 Portland and blended cements
AS 1722.2-1992 Pipe threads of Whitworth form Fastening pipe threads (Reconfirmed 2017)
AS 1790-1984 Electroplated coatings - Cadmium on iron or steel
AS/NZS 3500.0:2003 Plumbing and drainage Glossary of terms
AS 1830-1986 Iron castings - Grey cast iron
AS 3500.0-1990 National Plumbing and Drainage Code Glossary of terms
AS 2280-1988 Ductile iron pressure pipes and fittings
AS/NZS 4158.1:1994 Polymeric coatings on valves and fittings for water industry purposes Thermal-bonded coatings
AS 2345-1992 Dezincification resistance of copper alloys
AS 2758.1-1998 Aggregates and rock for engineering purposes - Concrete aggregates
AS/NZS 2280:2004 Ductile iron pipes and fittings
AS 3900.1-1987 Quality management and quality assurance Standards Guidelines for selection and use
HB 18.44-1991 Guidelines for third-party certification and accreditation - Guide 44: General rules for ISO or IEC international third-party certification schemes for products
AS 1650-1989 Hot-dipped galvanized coatings on ferrous articles

AS 5200.000-2006 Technical specification for plumbing and drainage products Procedures for certification of plumbing and drainage products (Reconfirmed 2018)
AS/NZS 3500.2:2018 Plumbing and drainage Sanitary plumbing and drainage
AS 4072.1-1992 Components for the protection of openings in fire-resistant separating elements - Service penetrations and control joints
AS/NZS 3500.5:2012 Plumbing and drainage Housing installations
AS/NZS 3500.2:2003 Plumbing and drainage Sanitary plumbing and drainage
AS/NZS 3500.2.2:1996 National plumbing and drainage Sanitary plumbing and drainage - Acceptable solutions
MP 52-2005 Manual of authorization procedures for plumbing and drainage products
AS/NZS 3500.3:2003 Plumbing and drainage Stormwater drainage
AS 3500.1-1992 National Plumbing and Drainage Code - Water supply
MP 52-1997 Manual of authorization procedures for plumbing and drainage products
AS 5200.000-2005 Technical specification for plumbing and drainage products Procedures for certification of plumbing and drainage products
AS/NZS 3500.3:2018 Plumbing and drainage Stormwater drainage
AS/NZS 3500.5:2000 National Plumbing and Drainage - Domestic installations
MP 52-2001 Manual of authorization procedures for plumbing and drainage products
AS/NZS 4327:1995 Metal-banded flexible couplings for low-pressure applications (Reconfirmed 2020)
AS/NZS 1516:1994 The cement mortar lining of pipelines in situ (Reconfirmed 2020)
AS 4072.1-2005 Components for the protection of openings in fire-resistant separating elements Service penetrations and control joints (Reconfirmed 2016)
AS/NZS 3500.3:2015 Plumbing and drainage Stormwater drainage
AS/NZS 3500.3.2:1998 National plumbing and drainage Stormwater drainage - Acceptable solutions

View more information
US$60.92
Excluding Tax where applicable

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.