AS 2074-2003
Withdrawn
A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.
Cast steels
Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users
06-30-2017
English
01-01-2003
Specifies requirements for carbon, low alloy and high alloy cast steels.
Committee |
MT-001
|
DocumentType |
Standard
|
ISBN |
0 7337 5322 1
|
Pages |
44
|
PublisherName |
Standards Australia
|
Status |
Withdrawn
|
Supersedes |
This Standard specifies requirements for carbon, low alloy and high alloy cast steels. NOTES: 1 Advice and recommendations on information for optional test requirements to be supplied by the purchaser at the time of enquiry or order are contained in Appendix A. 2 A summary of chemical composition and tensile properties of steels included in this Standard is given in Appendix B, which also provides guidance on the selection of grades for specific applications. 3 AS 2074 only specifies materials. AS 4738 specifies the other additional requirements of the casting (See Preface).
First published as AS B27-1931.
AS E7 first published 1938.
Second edition AS B27-1942.
AS B27-1942 revised and redesignated as AS G22-1969.
AS E7-1938 and AS G22-1969 revised, amalgamated and redesignated as 2074-1977.
Second edition 1982.
Third edition 2003.
AS 1391-2007 | Metallic materials - Tensile testing at ambient temperature (Reconfirmed 2017) |
AS 2291-2007 | Metallic materials - Tensile testing at elevated temperatures |
AS 2291-1979 | Methods for tensile testing of metals at elevated temperatures |
AS 1988-1989 | Welding of steel castings |
AS 2038-1977 | Methods for detecting the susceptibility of austenitic stainless steels to intergranular corrosion |
AS 1816.1-2002 | Metallic materials - Brinell hardness test Test method (ISO 6506-1:1999, MOD) |
AS 3507.1-2003 | Non-destructive testing Guide to radiography for ferrous castings |
AS 2706-1984 | Numerical values - Rounding and interpretation of limiting values |
AS 1544.2-1989 | Methods for impact tests on metals Charpy V-notch |
AS/NZS 1050.1:1996 | Methods for the analysis of iron and steel Sampling iron and steel for chemical analysis |
AS 3507.2-2006 | Non-destructive testing Radiographic determination of quality of ferrous castings |
AS 1391-1991 | Methods for tensile testing of metals |
AS 1544.2-2003 | Method for impact tests on metals Charpy V-notch (Reconfirmed 2017) |
AS 1816.1-2007 | Metallic materials - Brinell hardness test Test method (ISO 6506-1:2005, MOD) (Reconfirmed 2017) |
AS 4738.1-2007 | Metal castings Ferrous sand moulded |
AS 2706-2003 | Numerical values - Rounding and interpretation of limiting values (Reconfirmed 2018) |
AS 2419.3-2012 | Fire hydrant installations Fire brigade booster connections |
AS 1988.1-2006 | Welding of ferrous castings - Steel castings |
AS/NZS 1576.1:2010 | Scaffolding General requirements |
AS/NZS 1554.1:2004 | Structural steel welding Welding of steel structures |
AS 4087-2004 | Metallic flanges for waterworks purposes |
AS 2076-1996 | Wire-rope grips for non-lifting applications |
AS 2076-1996 | Wire-rope grips for non-lifting applications |
AS 2717.3-1992 | Welding - Electrodes - Gas metal arc Corrosion-resisting chromium and chromium-nickel steel electrodes |
AS 2740-2001 | Wedge-type sockets |
AS/NZS 3992:1998 | Pressure equipment - Welding and brazing qualification |
AS 2938-1993 | Gears - Spur and helical - Guide to specification and rating |
AS/NZS 2845.1:2010 | Water supply - Backflow prevention devices Materials, design and performance requirements |
AS 2129-2000 | Flanges for pipes, valves and fittings (Reconfirmed 2016) |
AS 1528.4-2001 | Tubes (stainless steel) and tube fittings for the food industry - Clamp liners with gaskets |
AS 1138-1992 | Thimbles for wire rope |
AS 5047-2005 | Hydraulic shoring and trench lining equipment |
AS 2089-1993 | Sheave blocks for lifting purposes |
AS/NZS 1554.7:2006 | Structural steel welding Welding of sheet steel structures |
AS/NZS 4994.1(INT):2004 | Temporary roof edge protection for housing and residential buildings General requirements |
AS/NZS 1554.5:2011 | Structural steel welding Welding of steel structures subject to high levels of fatigue loading |
AS 4181-2013 | Repair and off-take clamps for water industry purposes (Reconfirmed 2023) |
AS 1154.1-2009 | Insulator and conductor fittings for overhead power lines Performance, material, general requirements and dimensions (Reconfirmed 2019) |
AS 3751-2005 | Underground mining - Slope haulage - Couplings, drawbars, and safety chains |
AS 1228-2006 | Pressure equipment - Boilers |
AS/NZS 4998:2009 | Bolted unrestrained mechanical couplings for waterworks purposes (Reconfirmed 2022) |
AS 1418.14-1996 | Cranes (including hoists and winches) Requirements for cranes subject to arduous working conditions |
AS 1418.1-2002 | Cranes, hoists and winches General requirements |
AS 5100.6-2004 | Bridge design Steel and composite construction |
AS 4041-2006 | Pressure piping (Reconfirmed 2016) |
AS/NZS 4793:2009 | Mechanical tapping bands for waterworks purposes |
AS 4087:2011 | Metallic flanges for waterworks purposes |
AS 3637.1-2005 | Underground mining - Winding suspension equipment General requirements (Reconfirmed 2017) |
AS 4100-1998 | Steel structures (Reconfirmed 2016) |
AS 2419.2-2009 | Fire hydrant installations Fire hydrant valves |
AS/NZS 1554.6:1994 | Structural steel welding - Welding stainless steels for structural purposes |
AS 1735.2-2001 | Lifts, escalators and moving walks Passenger and goods lifts - Electric |
AS/NZS 1576.3:1995 | Scaffolding Prefabricated and tube-and-coupler scaffolding |
AS 1154.1-2004 | Insulator and conductor fittings for overhead power lines - Performance, material, general requirements and dimensions |
AS 4795-2006 | Butterfly valves for waterworks purposes |
AS 1910-2004 | Water supply - Float control valves for use in hot and cold water (Reconfirmed 2016) |
AS 1666.1-1995 | Wire-rope slings - Product specification |
AS/NZS 1554.5:2004 | Structural steel welding Welding of steel structures subject to high levels of fatigue loading |
AS 5612-2013 | Butterfly valves for general purposes |
AS/NZS 2845.1:1998 | Water supply - Backflow prevention devices Materials, design and performance requirements |
AS 1210-1997 | Pressure vessels |
AS 2318-2006 | Swivels for lifting applications (Reconfirmed 2022) |
AS 1228:2016 | Pressure equipment - Boilers |
AS 4738.1-2007 | Metal castings Ferrous sand moulded |
AS/NZS 1576.5:1995 | Scaffolding Prefabricated splitheads and trestles |
AS 4738.1-2004 | Metal castings Ferrous sand moulded |
AS 1138-2008 | Thimbles for wire rope (Reconfirmed 2019) |
AS 1735.1-2003 | Lifts, escalators and moving walks General requirements |
AS 4795.2-2011 | Butterfly valves for waterworks purposes Double flanged |
AS 2304-2011 | Water storage tanks for fire protection systems |
AS 1666.1-2009 | Wire-rope slings Product specification (Reconfirmed 2019) |
AS 1788.1-1987 | Abrasive wheels Design, construction, and safeguarding |
AS/NZS 1554.1:2011 | Structural steel welding Welding of steel structures |
AS/NZS 5100.6:2017 | Bridge design Steel and composite construction |
AS/NZS 4994.1:2009 | Temporary edge protection General requirements |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.