• There are no items in your cart

AS 2699.3:2020

Current

Current

The latest, up-to-date edition.

Built-in components for masonry construction Lintels and shelf angles (durability requirements)

Available format(s)

Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users

Language(s)

English

Published date

06-12-2020

Preview

This Standard specifies requirements for testing the durability performance of steel lintels and shelf angles to be built into masonry.

This Standard specifies requirements for the durability performance of steel lintels and shelf angles to be built into masonry.
This Standard applies to lintels and shelf angles used in masonry construction described in AS 3700, AS 4773.1 and AS 4773.2.
NOTE 1 AS 2699.1 specifies the durability performance and test procedures for structural performance of wall ties used in masonry construction.
NOTE 2 AS 2699.2 specifies the durability performance and test procedures for structural performance of connectors and accessories used in masonry construction.
NOTE 3 Throughout this Standard, lintel signifies lintel or shelf angle, unless stated otherwise.
NOTE 4 The durability classifications employed in this Standard are compatible with the environments specified in ISO 9223, AS 4312—2008, AS 3700, AS 4773.1 and AS 4773.2.
NOTE 5 This Standard does not cover requirements for structural design or the method of its determination. Details for these are given by AS 3700, AS 4773.1, AS 4100, and AS/NZS 4600.
NOTE 6 Design and installation requirements for lintels and shelf angles are specified in AS 3700, AS 4773.1 (design) and AS 4773.2 (construction).

Committee
BD-028
DocumentType
Standard
ISBN
978 1 76072 873 1
Pages
28
PublisherName
Standards Australia
Status
Current
Supersedes

First published as AS/NZS 2699.3:2000.
Second edition 2002.
AS/NZS 2699.3:2002 revised and redesignated AS 2699.3:2020. First published as AS/NZS 2699.3:2000. Second edition 2002. AS/NZS 2699.3:2002 revised and redesignated AS 2699.3:2020.

AS/NZS 4600:2018 Cold-formed steel structures
AS 1627.4-2005 Metal finishing - Preparation and pretreatment of surfaces Abrasive blast cleaning of steel (Reconfirmed 2017)
ISO 3951-1:2013 Sampling procedures for inspection by variables — Part 1: Specification for single sampling plans indexed by acceptance quality limit (AQL) for lot-by-lot inspection for a single quality characteristic and a single AQL
AS 2699.1:2020 Built-in components for masonry construction Wall ties
AS 4773.1:2015 Masonry in small buildings Design
AS 3894.3-2002 Site testing of protective coatings Determination of dry film thickness (Reconfirmed 2013)
AS/NZS 3750.6:2009 Paints for steel structures Full gloss polyurethane (two-pack) (Reconfirmed 2020)
AS/NZS 4791:2006 Hot-dip galvanized (zinc) coatings on ferrous open sections, applied by an in-line process (Reconfirmed 2017)
AS ISO/IEC 17025:2018 General requirements for the competence of testing and calibration laboratories
AS 4773.2:2015 Masonry in small buildings Construction
ISO 3951-4:2011 Sampling procedures for inspection by variables — Part 4: Procedures for assessment of declared quality levels
AS 1397-2011 Continuous hot-dip metallic coated steel sheet and strip - Coatings of zinc and zinc alloyed with aluminium and magnesium
ISO 9227:2017 Corrosion tests in artificial atmospheres — Salt spray tests
ISO 9223:2012 Corrosion of metals and alloys — Corrosivity of atmospheres — Classification, determination and estimation
AS/NZS 4680:2006 Hot-dip galvanized (zinc) coatings on fabricated ferrous articles (Reconfirmed 2017)
AS 4312-2008 Atmospheric corrosivity zones in Australia
AS/NZS 3750.9:2009 Paints for steel structures Organic zinc-rich primer (Reconfirmed 2019)
ISO 19840:2012 Paints and varnishes — Corrosion protection of steel structures by protective paint systems — Measurement of, and acceptance criteria for, the thickness of dry films on rough surfaces
AS 3700:2018 Masonry Structures
AS/NZS 2312.2:2014 Guide to the protection of structural steel against atmospheric corrosion by the use of protective coatings Hot dip galvanizing
ASTM A 240/A240M : 2019 Standard Specification for Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and for General Applications
AS 2699.2:2020 Built-in components for masonry construction Connectors and accessories
ISO 3951-2:2013 Sampling procedures for inspection by variables — Part 2: General specification for single sampling plans indexed by acceptance quality limit (AQL) for lot-by-lot inspection of independent quality characteristics
AS 2312.1:2014 Guide to the protection of structural steel against atmospheric corrosion by the use of protective coatings Paint coatings
AS 4100-1998 Steel structures (Reconfirmed 2016)
AS 2331.3.1-2001 Methods of test for metallic and related coatings Corrosion and related property tests - Neutral salt spray test (NSS test) (Reconfirmed 2017)
ISO 3951-3:2007 Sampling procedures for inspection by variables Part 3: Double sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection
ASTM B 117 : 2019 Standard Practice for Operating Salt Spray (Fog) Apparatus
AS 2331.1.4-2001 Methods of test for metallic and related coatings Local thickness tests - Magnetic induction and eddy current methods
ISO 2178:2016 Non-magnetic coatings on magnetic substrates Measurement of coating thickness Magnetic method
ISO 3951-5:2006 Sampling procedures for inspection by variables Part 5: Sequential sampling plans indexed by acceptance quality limit (AQL) for inspection by variables (known standard deviation)
AS 4848.1:2019 Application specifications for coating systems Single coat inorganic (ethyl) zinc silicate - Solvent-borne

View more information
US$67.79
Excluding Tax where applicable

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.