• There are no items in your cart

AS 2848.1-1998

Current

Current

The latest, up-to-date edition.

Aluminium and aluminium alloys - Compositions and designations Wrought products (Reconfirmed 2018)

Available format(s)

Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users

Language(s)

English

Published date

10-05-1998

Preview

1 - AS 2848.1-1998 ALUMINIUM AND ALUMINIUM ALLOYS-COMPOSITIONS AND DESIGNATIONS - WROUGHT PRODUCTS
4 - PREFACE
4 - CONTENTS
5 - SECTION 1 SCOPE AND GENERAL
5 - 1.1 SCOPE
5 - 1.2 DEFINITIONS
5 - 1.2.1 Annealing
5 - 1.2.2 Artificial ageing
5 - 1.2.3 Cold working
5 - 1.2.4 Natural ageing
5 - 1.2.5 Partial annealing
5 - 1.2.6 Quenching
5 - 1.2.7 Solution heat treatment
5 - 1.2.8 Stabilizing
5 - 1.2.9 Strain hardening
5 - 1.2.10 Temper
6 - SECTION 2 ALLOY DESIGNATION
6 - 2.1 SCOPE
6 - 2.2 DESIGNATION SYSTEM
6 - 2.2.1 General
6 - 2.2.2 Aluminium and aluminium alloy groups
6 - 2.2.3 IXXX group
6 - 2.2.4 2XXX to 8XXX groups
6 - 2.2.5 Modification of original alloys
7 - 2.3 CHEMICAL COMPOSITION
7 - 2.3.1 General
7 - 2.3.2 Standard limits
7 - 2.3.3 Conformance with standard limits
8 - 2.3.4 Aluminium content
8 - 2.3.5 Unnamed elements
12 - SECTION 3 TEMPER DESIGNATION
12 - 3.1 SCOPE
12 - 3.2 DESIGNATION SYSTEM
12 - 3.3 BASIC TEMPER DESIGNATIONS
12 - 3.4 STRAIN-HARDENED TEMPERS (H)
12 - 3.4.1 General
12 - 3.4.2 First digit
13 - 3.4.3 Second digit
13 - 3.4.4 Third digit
14 - 3.5 THERMALLY TREATED TEMPERS (T)
14 - 3.5.1 General
14 - 3.5.2 First digit
15 - 3.5.3 Additional digits

Sets out designation systems to identify grades of wrought aluminium and aluminium alloys and their tempers. Full chemical compositions are included for wrought grades currently available in Australia.

This Standard provides a listing of wrought aluminium and aluminium alloys currently available in Australia and defines the temper designation system for aluminium and aluminium alloys that have been strain hardened, with or without supplementary thermal treatments, or thermally treated, with or without supplementary strain-hardening. This Standard specifies chemical composition limits for all designated grades. Requirements for other properties are specified in Standards that cover product types.

Committee
MT/3
DocumentType
Standard
ISBN
0 7337 2204 0
Pages
11
ProductNote
Reconfirmed 14/09/2018.
This standard has been reconfirmed in Australia in 2018 and remains current in New Zealand. Reconfirmation Notice 14/09/2018
PublisherName
Standards Australia
Status
Current
Supersedes
UnderRevision

First published as AS 2848.1-1986.
Second edition 1998.
Reconfirmed 2018.
Originated as AS 2848.1-1986. Second edition 1998.

AS 3607-1989 Conductors - Bare overhead, aluminium and aluminium alloy - Steel reinforced (Reconfirmed 2016)
AS/NZS 1867:1997 Aluminium and aluminium alloys - Drawn tubes (Reconfirmed 2020)
AS 4132.2-1993 Boat and ship design and construction - Aluminium construction
AS 5047-2005 Hydraulic shoring and trench lining equipment
AS EN 12079.1-2010 Offshore containers and associated lifting sets Offshore containers - Design, manufacture and marking (EN 12079-1:2006, MOD)
AS 1627.5-2003 Metal finishing - Preparation and pretreatment of surfaces Pickling (Reconfirmed 2017)
AS 1799.5-1990 Small pleasure boats code - Aluminium construction
AS/NZS 1865:1997 Aluminium and aluminium alloys - Drawn wire, rod, bar and strip (Reconfirmed 2020)
AS/NZS 1664.2:1997 Aluminium structures Allowable stress design (Reconfirmed 2020)
AS 3975-1991 Aluminium alloys - Irrigation tube
AS/NZS 1125:2001 Conductors in insulated electric cables and flexible cords (Reconfirmed 2017)
AS/NZS 2728:2013 Prefinished/prepainted sheet metal products for interior/exterior building applications - Performance requirements
AS/NZS 1734:1997 Aluminium and aluminium alloys - Flat sheet, coiled sheet and plate (Reconfirmed 2020)
AS 1627.5-1994 Metal finishing - Preparation and pretreatment of surfaces - Pickling, descaling and oxide removal
AS 1531-1991 Conductors - Bare overhead - Aluminium and aluminium alloy (Reconfirmed 2016)
AS/NZS 2728:1997 Prefinished/prepainted sheet metal products for interior/exterior building applications - Performance requirements
AS/NZS 1576.3:1995 Scaffolding Prefabricated and tube-and-coupler scaffolding
AS/NZS 2728:2007 Prefinished/prepainted sheet metal products for interior/exterior building applications - Performance requirements
AS 3797.3-1991 Hand hammers - Specific requirements for light hammers
AS/NZS 1194.3:1996 Winding wires Enamelled round aluminium winding wires
AS 1530.2-1993 Methods for fire tests on building materials, components and structures Test for flammability of materials (Reconfirmed 2016)
AS/NZS 1576.5:1995 Scaffolding Prefabricated splitheads and trestles
AS/NZS 1429.2:2009 Electric cables - Polymeric insulated For working voltages above 19/33 (36) kV up to and including 87/150 (170) kV (Reconfirmed 2020)
AS/NZS 2785:2000 Suspended ceilings - Design and installation
AS/NZS 1194.4:1996 Winding wires Enamelled rectangular aluminium winding wires
AS 1222.2-1992 Steel conductors and stays - Bare overhead Aluminium clad (SC/AC) (Reconfirmed 2016)
AS 1576.3-1991
AS/NZS 1866:1997 Aluminium and aluminium alloys - Extruded rod, bar, solid and hollow shapes (Reconfirmed 2020)
AS/NZS 1664.1:1997 Aluminium structures Limit state design (Reconfirmed 2020)
AS 6001-1999 Working platforms for housing construction

View more information
US$34.12
Excluding Tax where applicable

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.