AS 3750.1-1994
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Paints for steel structures - Epoxy mastic (two-pack) - For rusted steel
Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users
05-03-2018
English
01-01-1994
Provides requirements for two-component, high-build, high solids, epoxy mastic paint for the protection of iron and steel against exterior atmospheric corrosion.
Committee |
CH-003
|
DocumentType |
Standard
|
ISBN |
0 7262 8393 2
|
Pages |
26
|
PublisherName |
Standards Australia
|
Status |
Superseded
|
SupersededBy | |
Supersedes | |
UnderRevision |
This Standard specifies requirements for a two-component, high-build, high-solids, epoxy mastic for the protection of iron and steel against exterior atmospheric corrosion in a severe industrial or coastal marine environment. It is intended primarily for use on imperfectly prepared surfaces, i.e. surfaces which have been cleaned only by hand or power tool to the extent that bare steel areas with residual rust and some previously applied paint of any type are still present. Paint specified in this Standard is described in AS 2312 as Paint Reference 32. This product is generally pigmented with aluminium, however, it may be produced in a restricted range of colours. It is designed primarily for use as a single coat, high-build, self priming finish.NOTES:1 This paint may be used as detailed for system SP3, MP8A in AS 2312.2 Appendix A contains recommendations and advice on information which should be provided by the purchaser at the time of enquiry or order.3 Additional information on the use and application of epoxy paints is contained in Appendix B.4 Alternative methods for determining compliance with this Standard are given in Appendix C.
First published as AS 3750-1994.
AS/NZS 1580.457.1:1996 | Paints and related materials - Methods of test Resistance to natural weathering (Reconfirmed 2013) |
AS 2508.8.006-1992 | Safe storage and handling information card - Sodium hydroxide (solid and solution) (caustic soda) |
AS 1580.211.2-1980 | Paints and related materials - Methods of test Ease of manual re-incorporation |
AS 1399-1990 | Guide to AS 1199 - Sampling procedures and tables for inspection by attributes |
AS 1627.4-2005 | Metal finishing - Preparation and pretreatment of surfaces Abrasive blast cleaning of steel (Reconfirmed 2017) |
AS/NZS 2312:2002 | Guide to the protection of structural steel against atmospheric corrosion by the use of protective coatings |
AS 2854-1986 | Tinplate cans for general use |
AS 1199-1988 | Sampling procedures and tables for inspection by attributes |
AS 3530-1988 | Solvents - Mineral turpentine and white spirit |
AS 1580.108.2-1993 | Paints and related materials - Methods of test Dry film thickness - Paint inspection gauge |
AS 1580.454.1-1992 | Paints and related materials - Methods of test Resistance to mineral oil |
AS 1580.403.1-1981 | Paints and related materials - Methods of test Scratch resistance |
AS 1580.481.3-2002 | Paints and related materials - Methods of test Coatings - Exposed to weathering - Degree of corrosion of coated metal substrates (Reconfirmed 2013) |
AS 1627.4-1989 | Metal finishing - Preparation and pretreatment of sufaces - Abrasive blast cleaning |
AS 1580.103.1-1980 | Paints and related materials - Methods of test Preliminary examination and preparation for testing |
AS 1517-1991 | Tinplate and blackplate |
AS/NZS 1580.481.1.8:1998 | Paints and related materials - Methods of test Coatings - Exposed to weathering - Degree of cracking (Reconfirmed 2013) |
AS 2905-1986 | Steel drums |
AS 1580.105.2-2002 | Paints and related materials - Methods of test Pretreatment of metal test panels - Sanding |
AS 2854-2004 | Tinplate cans for general use |
AS/NZS 1580.101.1:1999 | Paints and related materials - Methods of test Conditions of test - Temperature, humidity and airflow control (Reconfirmed 2013) |
AS 1580.104.1-1992 | Paints and related materials - Methods of test Recommended materials for test panels |
AS 1580.601.1-1975 | Paints and related materials - Methods of test Colour - Visual comparison |
AS/NZS 1580.404.1:1997 | Paints and related materials - Methods of test Recoating properties (Reconfirmed 2013) |
AS 2312-1984 | Guide to the protection of iron and steel against exterior atmospheric corrosion |
AS 1580.454.1-2002 | Paints and related materials - Methods of test Resistance to mineral oil and other organic liquids |
AS 1627.2-2002 | Metal finishing - Preparation and pretreatment of surfaces Power tool cleaning (Reconfirmed 2017) |
AS/NZS 1580.103.1:1995 | Paints and related materials Methods of test - Examination and preparation of samples for testing (Reconfirmed 2013) |
AS/NZS 1580.481.1.6:1998 | Paints and related materials - Methods of test Coatings - Exposed to weathering - Degree of erosion (Reconfirmed 2013) |
AS 1580.452.2-2002 | Paints and related materials - Methods of test Resistance to corrosion - Salt droplet test |
AS/NZS 1580.601.1:1995 | Paints and related materials - Methods of test Colour - Visual comparison (Reconfirmed 2013) |
AS/NZS 1580.403.1:1999 | Paints and related materials - Methods of test Scratch resistance (Reconfirmed 2013) |
AS/NZS 1580.211.2:1995 | Paints and related materials - Methods of test Ease of manual re-incorporation (Reconfirmed 2013) |
AS 2508.3.016-1982 | Safe storage and handling information card - Methyl isobutyl ketone (MIBK) |
AS 1580.602.1-1975 | Paints and related materials - Methods of test Visual assessment of gloss |
AS/NZS 2310:2002 | Glossary of paint and painting terms (Reconfirmed 2016) |
AS/NZS 1580.481.1.9:1998 | Paints and related materials - Methods of test Coatings - Exposed to weathering - Degree of blistering (Reconfirmed 2013) |
HB 18.44-1991 | Guidelines for third-party certification and accreditation - Guide 44: General rules for ISO or IEC international third-party certification schemes for products |
AS 1580.481.3-1992 | Paints and related materials - Methods of test Coatings - Exposed to weathering - Degree of corrosion of coated metal substrates |
AS/NZS 1580.602.2:1995 | Paints and related materials - Methods of test Measurement of specular gloss of non-metallic paint films at 20°, 60° and 85° (Reconfirmed 2013) |
AS 1580.205.4-1981 | Paints and related materials - Methods of test Application properties - Airless spraying |
AS 1580.404.1-1981 | Paints and related materials - Methods of test Recoating properties |
AS 1580.205.2-1981 | Paints and related materials - Methods of test Application properties - Conventional air spraying |
AS 2508.8.010-1990 | Safe storage and handling information cards for hazardous materials - Sulfuric acid (up to 98% m/m) |
AS 1580.105.1-2002 | Paints and related materials - Methods of test Pretreatment of metal test panels - Solvent cleaning |
AS 1627.7-1988 | Metal finishing - Preparation and pretreatment of surfaces - Hand tool cleaning of metal surfaces |
AS 1580.603.1-2002 | Paints and related materials - Methods of test Finish - General appearance (Reconfirmed 2013) |
AS 1580.602.2-1974 | Paints and related materials - Methods of test Specular gloss |
AS 1580.402.1-1992 | Paints and related materials - Methods of test Bend test |
AS 1580.603.1-1992 | Paints and related materials - Methods of test Finish |
AS 1627.9-1989 | Metal finishing - Preparation and pretreatment of surfaces - Pictorial surface preparation standards for painting steel surfaces |
AS/NZS 1580.104.1:2000 | Paints and related materials - Methods of test Recommended materials for test panels (Reconfirmed 2013) |
AS 1580.101.5-1986 | Paints and related materials - Methods of test Conditions of test, temperature and humidity controlled |
AS/NZS 1580.481.1.10:1998 | Paints and related materials - Methods of test Coatings - Exposed to weathering - Degree of flaking and peeling (Reconfirmed 2013) |
AS/NZS 1580.205.2:1997 | Paints and related materials - Methods of test Application properties - Conventional spraying (Reconfirmed 2013) |
AS 1580.401.5-2002 | Paints and related materials - Methods of test Hard dry condition - Sanding test |
AS 1580.401.5-1993 | Paints and related materials - Methods of test Hard dry condition - Sanding test |
AS 1580.301.2-1990 | Paints and related materials - Methods of test Non-volatile content by volume (volume solids) (Reconfirmed 2013) |
AS 1627.2-1989 | Metal finishing - Preparation and pretreatment of surfaces - Power tool cleaning |
AS 1580.481.1.6-1991 | Paints and related materials - Methods of test Coatings - Exposed to weathering - Degree of erosion |
AS 1580.457.1-1988 | Paints and related materials - Methods of test Resistance to natural weathering |
AS/NZS 1580.108.1:1994 | Paints and related materials - Methods of test Determination of dry film thickness on metallic substrates - Non-destructive methods (Reconfirmed 2013) |
AS 1580.402.1-2003 | Paints and related materials - Methods of test Bend test |
AS/NZS 1580.101.5:1999 | Paints and related materials - Methods of test Conditions of test - Temperature and humidity control (Reconfirmed 2013) |
AS 1580.481.1.8-1991 | Paints and related materials - Methods of test Coatings - Exposed to weathering - Degree of cracking |
AS 1580.108.2-2004 | Paints and related materials - Methods of test Dry film thickness - Paint inspection gauge (Reconfirmed 2019) |
AS 2310-1980 | Glossary of paint and painting terms |
AS 3904.1-1987 | Quality management and quality system elements Guidelines |
AS 1580.452.2-1992 | Paints and related materials - Methods of test resistance to corrosion - Salt droplet test |
AS 1580.408.2-2004 | Paints and related materials - Methods of test Adhesion - Knife test (Reconfirmed 2019) |
AS 1580.408.2-1993 | Paints and related materials - Methods of test Adhesion - Knife test |
AS 1580.108.1-1980 | Paints and related materials - Methods of test Determination of dry film thickness on iron and steel substrates (permanent magnet instruments) |
AS 1580.105.2-1993 | Paints and related materials - Methods of test Pretreatment of metal test panels - Sanding |
AS/NZS 1580.211.1:1995 | Paints and related materials - Methods of test Degree of settling (Reconfirmed 2013) |
AS 2905-2005 | Steel drums |
AS 1580.211.1-1980 | Paints and related materials - Methods of test Degree of settling |
AS 1580.481.1.9-1991 | Paints and related materials - Methods of test Coatings - Exposed to weathering - Degree of blistering |
AS 1580.101.1-1986 | Paints and related materials - Methods of test Air drying conditions |
AS 1580.105.1-1992 | Paints and related materials - Methods of test Pretreatment of metal test panels - Solvent cleaning |
AS/NZS 1580.205.4:1998 | Paints and related materials - Methods of test Application properties - Airless spraying (Reconfirmed 2013) |
AS 1627.9-2002 | Metal finishing - Preparation and pretreatment of surfaces Pictorial surface preparation standards for painting steel surfaces (Reconfirmed 2017) |
AS 3900.1-1987 | Quality management and quality assurance Standards Guidelines for selection and use |
AS 1580.481.0-2003 | Paints and related materials - Methods of test Coatings - Guide to assessing paint systems exposed to weathering conditions |
AS 3700-1998 | Masonry structures |
AS/NZS 2699.3:2000 | Built-in components for masonry construction Lintels and shelf angles (durability requirements) |
AS/NZS 2312:2002 | Guide to the protection of structural steel against atmospheric corrosion by the use of protective coatings |
AS/NZS 2699.3:2002 | Built-in components for masonry construction Lintels and shelf angles (durability requirements) |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.