AS 3818.10-2010

1 - AS 3818.10-2010 TIMBER-HEAVY STRUCTURAL PRODUCTS-VISUALLY GRADED - BUILDING POLES
4 - PREFACE
5 - CONTENTS
6 - SECTION 1 SCOPE AND GENERAL
6 - 1.1 SCOPE
6 - 1.2 APPLICATION
7 - 1.3 NORMATIVE REFERENCES
7 - 1.4 DEFINITIONS
7 - 1.5 SIZE AND FORM OF BUILDING POLE
7 - 1.5.1 General
7 - 1.5.2 Length
7 - 1.5.3 Diameter
7 - 1.5.4 Ovality
7 - 1.5.5 Straightness
8 - 1.6 MEASUREMENT OF KNOTS
8 - 1.7 RATINGS-END SPLITS AND BARREL CHECKS
9 - 1.8 SPECIES BRANDING
9 - 1.9 REMOVAL OF BUMPS
9 - 1.10 COMBINATION OF CHARACTERISTICS
10 - SECTION 2 BUILDING POLES INTENDED FOR USE WITHOUT FULL-LENGTH PRESERVATIVE TREATMENT
10 - 2.1 TIMBER SPECIES AND POLE PREPARATION
10 - 2.2 GRADE REQUIREMENTS
10 - 2.2.1 General
10 - 2.2.2 Grade requirements-Characteristics confined to sapwood
10 - 2.2.3 Grade requirements-Characteristics in heartwood
12 - 2.3 CONFIRMATION OF COMPLIANCE
13 - SECTION 3 HARDWOOD BUILDING POLES INTENDED FOR USE AFTER FULL-LENGTH PRESERVATIVE TREATMENT
13 - 3.1 TIMBER SPECIES AND POLE PREPARATION
13 - 3.2 GRADE REQUIREMENTS
13 - 3.2.1 General
13 - 3.2.2 Grade requirements-Characteristics (in heartwood or sapwood)
15 - 3.3 CONFIRMATION OF COMPLIANCE
16 - SECTION 4 SOFTWOOD BUILDING POLES INTENDED FOR USE AFTER FULL-LENGTH PRESERVATIVE TREATMENT
16 - 4.1 TIMBER SPECIES AND POLE PREPARATION
16 - 4.2 GRADE REQUIREMENTS
16 - 4.2.1 General
16 - 4.2.2 Grade requirements-Characteristics (in heartwood or sapwood)
18 - 4.3 CONFIRMATION OF COMPLIANCE
19 - SECTION 5 REQUIREMENTS FOR FULL-LENGTH PRESERVATIVE TREATMENT
19 - 5.1 POLES FOR PRESERVATIVE TREATMENT
19 - 5.2 PRESERVATIVE PENETRATION AND RETENTION
19 - 5.2.1 Preservative penetration
19 - 5.2.2 Preservative retention
19 - 5.3 SURFACE CONDITION
19 - 5.4 CONFIRMATION OF COMPLIANCE
20 - APPENDIX A - PURCHASING GUIDELINES
20 - A1 INFORMATION TO BE INCLUDED IN PURCHASING ORDERS
20 - A2 STORAGE AND MAINTENANCE
21 - APPENDIX B - PRE-TREATMENT CHEMICAL TEST FOR DIFFERENTIATING BETWEEN SAPWOOD AND HEARTWOOD IN SOFTWOOD POLE TIMBERS...
21 - B1 GENERAL
21 - B2 PRINCIPLE
21 - B3 PREPARATION OF SAMPLE
21 - B4 REAGENTS
21 - B4.1 Ammonia solution
21 - B4.2 Panda reagent
21 - B4.3 Sodium nitrite solution
21 - B4.4 Mixture
21 - B5 PROCEDURE
22 - B6 REPORT
23 - BIBLIOGRAPHY

Provides producers and users of building poles with requirements for the visual grading of such timbers intended for use in structures.

This Standard sets out the minimum requirements for visually graded timber building poles with or without full-length preservative treatment, intended primarily for use in the framework (internal or external) of a building. These minimum requirements apply at the time of grading.This Standard does not cover requirements for strength and dimensions.NOTE: Requirements for strength and dimensions should be specified separately.

First published as AS 3818.10-2010.