• There are no items in your cart

AS 4025.4-1994

Superseded

Superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

View Superseded by
superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

Paints for equipment including ships Solvent-borne - Lead and chromate free - Anticorrosive metal primer

Available format(s)

Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users

Superseded date

05-03-2018

Language(s)

English

Published date

01-01-1994

Preview

1 - AS 4025.4:1994 PAINTS FOR EQUIPMENT INCLUDING SHIPS - SOLVENT-BORNE - LEAD AND CHROMATE FREE - ANTICORROSIVE METAL PRIMER
4 - PREFACE
4 - CONTENTS
5 - 1 SCOPE
5 - 2 REFERENCED DOCUMENTS
5 - 3 DEFINITIONS
5 - 3.1 Frying
5 - 3.2 Working up
5 - 4 MATERIAL REQUIREMENTS
5 - 4.1 Composition
6 - 4.2 Conditions of test
6 - 4.3 Liquid paint
6 - 4.3.1 Condition in container
6 - 4.3.2 Fineness of grind
6 - 4.3.3 Volume solids
6 - 4.3.4 Susceptibility to formation of skin
6 - 4.3.5 Storage stability
6 - 4.3.6 Consistency
6 - 4.3.7 Density
6 - 4.4 Application properties
6 - 4.4.1 General
6 - 4.4.2 Brushing
6 - 4.4.3 Rolling
7 - 4.4.4 Spraying
7 - 4.5 Applied film
7 - 4.5.1 Dry times
7 - 4.5.2 Recoating properties and finish
7 - 4.5.3 Scratch resistance
7 - 4.5.4 Adhesion to substrate
7 - 4.5.5 Colour
7 - 4.5.6 Resistance to weathering
7 - 4.5.6.1 General
7 - 4.5.6.2 Weathering
7 - 4.5.7 Salt droplet test
7 - 5 PACKAGING
9 - 6 MARKING
10 - 7 ADDITIONAL MARKING
11 - APPENDIX A - PURCHASING GUIDELINES
11 - A1 SCOPE
11 - A2 GENERAL
11 - A3 INFORMATION TO BE SUPPLIED WITH THE ENQUIRY OR ORDER
12 - APPENDIX B - INFORMATION ON THE USE AND APPLICATION OF PRIMERS
12 - B1 SCOPE
12 - B2 MANUFACTURER’S TECHNICAL DATA
12 - B3 SAFETY PRECAUTIONS
12 - B4 APPLICATION AND USE
13 - APPENDIX C - LIST OF REFERENCED DOCUMENTS
15 - APPENDIX D - PREPARATION OF TEST PANELS FOR RESISTANCE TO WEATHERING
15 - D1 SCOPE
15 - D2 TEST PANEL MATERIALS
15 - D3 PREPARATION OF PANELS
15 - D4 COATING THE PANEL

Specifies requirements for solvent-borne, lead and chromate free, anticorrosive metal primer applied to ships and equipment.

This Standard sets out requirements for solvent-borne pigmented metal priming paints for ships and equipment. They are intended to be applied as supplied by brush, roller or spray. The Standard deals with primers that are surface dry within 2 h and may be overcoated after 24 h.This Standard applies to paints intended for the priming of well-cleaned steel or aluminium surfaces, that are to be undercoated with paint specified by AS 4025.2 and then topcoated with a film of semi-gloss enamel to AS 4025.3 or full gloss enamel to AS 4025.1, that will provide resistance to weathering, washing and intermittent contact with petrol or mineral oils. Typical applications include machinery and the superstructures of ships.NOTES:1 Appendix A contains recommendations and advice on information which should be provided by the purchaser at the time of enquiry or order.2 Additional information on the use and application of metal primers is given in Appendix B.

Committee
CH-003
DocumentType
Standard
ISBN
0 7262 8797 0
Pages
11
PublisherName
Standards Australia
Status
Superseded
SupersededBy
Supersedes
UnderRevision

First published as AS 4025.4-1994.

AS 1580.205.1-1981 Paints and related materials - Methods of test Application properties - Brushing
AS/NZS 1580.481.1.10:1998 Paints and related materials - Methods of test Coatings - Exposed to weathering - Degree of flaking and peeling (Reconfirmed 2013)
AS 1580.481.1.8-1991 Paints and related materials - Methods of test Coatings - Exposed to weathering - Degree of cracking
AS 1580.204.1-1990 Paints and related materials - Methods of test Fineness of grind
AS 1627.4-2005 Metal finishing - Preparation and pretreatment of surfaces Abrasive blast cleaning of steel (Reconfirmed 2017)
AS 1580.452.2-1992 Paints and related materials - Methods of test resistance to corrosion - Salt droplet test
AS 1580.214.3-1993 Paints and related materials - Methods of test Viscosity - Cone-and-plate
AS/NZS 1580.481.1.6:1998 Paints and related materials - Methods of test Coatings - Exposed to weathering - Degree of erosion (Reconfirmed 2013)
AS/NZS 1580.205.3:1997 Paints and related materials - Methods of test Application properties - Roller coating (Reconfirmed 2013)
AS 1580.205.3-1981 Paints and related materials - Methods of test Application properties - Roller coating
AS 1580.481.1.10-1991 Paints and related materials - Methods of test Coatings - Exposed to weathering - Degree of flaking and peeling
AS/NZS 1580.211.2:1995 Paints and related materials - Methods of test Ease of manual re-incorporation (Reconfirmed 2013)
AS/NZS 1580.601.1:1995 Paints and related materials - Methods of test Colour - Visual comparison (Reconfirmed 2013)
AS 1580.105.2-1993 Paints and related materials - Methods of test Pretreatment of metal test panels - Sanding
AS 1580.211.2-1980 Paints and related materials - Methods of test Ease of manual re-incorporation
AS/NZS 1580.101.1:1999 Paints and related materials - Methods of test Conditions of test - Temperature, humidity and airflow control (Reconfirmed 2013)
AS 1580.104.1-1992 Paints and related materials - Methods of test Recommended materials for test panels
AS 1580.601.1-1975 Paints and related materials - Methods of test Colour - Visual comparison
AS 2312-1984 Guide to the protection of iron and steel against exterior atmospheric corrosion
AS 1627.2-2002 Metal finishing - Preparation and pretreatment of surfaces Power tool cleaning (Reconfirmed 2017)
AS/NZS 1580.457.1:1996 Paints and related materials - Methods of test Resistance to natural weathering (Reconfirmed 2013)
AS/NZS 1580.481.1.7:1998 Paints and related materials - Methods of test Coatings - Exposed to weathering - Degree of checking (Reconfirmed 2013)
AS 2854-1986 Tinplate cans for general use
AS 1580.408.4-1993 Paints and related materials - Methods of test Adhesion (cross-cut)
AS/NZS 1580.401.1:1999 Paints and related materials - Methods of test Surface dry condition (Reconfirmed 2013)
AS/NZS 1580.481.1.9:1998 Paints and related materials - Methods of test Coatings - Exposed to weathering - Degree of blistering (Reconfirmed 2013)
AS 1580.452.2-2002 Paints and related materials - Methods of test Resistance to corrosion - Salt droplet test
AS 1627.4-1989 Metal finishing - Preparation and pretreatment of sufaces - Abrasive blast cleaning
AS 1580.603.1-2002 Paints and related materials - Methods of test Finish - General appearance (Reconfirmed 2013)
AS/NZS 1580.403.1:1999 Paints and related materials - Methods of test Scratch resistance (Reconfirmed 2013)
AS 1580.401.1-1981 Paints and related materials - Methods of test Surface dry condition
AS/NZS 2310:2002 Glossary of paint and painting terms (Reconfirmed 2016)
AS 1580.105.1-2002 Paints and related materials - Methods of test Pretreatment of metal test panels - Solvent cleaning
AS 1580.203.1-1993 Paints and related materials - Methods of test Skin formation
AS 1627.7-1988 Metal finishing - Preparation and pretreatment of surfaces - Hand tool cleaning of metal surfaces
AS 4025.3-1993 Paints for equipment including ships Solvent-borne - Interior and exterior - Semi-gloss enamel
AS 4025.2-1993 Paints for equipment including ships Solvent-borne - Interior and exterior - Undercoat
AS/NZS 1580.202.1:1995 Paints and related materials - Methods of test Density (Reconfirmed 2013)
AS 2905-1986 Steel drums
AS 1580.105.2-2002 Paints and related materials - Methods of test Pretreatment of metal test panels - Sanding
AS 2854-2004 Tinplate cans for general use
AS 1580.101.1-1986 Paints and related materials - Methods of test Air drying conditions
AS/NZS 1580.101.5:1999 Paints and related materials - Methods of test Conditions of test - Temperature and humidity control (Reconfirmed 2013)
AS 2310-1980 Glossary of paint and painting terms
AS 4025.1-1992 Paints for equipment including ships Solvent-borne - Interior and exterior - Full gloss enamel
AS 1580.214.4-1990 Paints and related materials - Methods of test - Consistency - Rotothinner
AS/NZS 1580.481.1.8:1998 Paints and related materials - Methods of test Coatings - Exposed to weathering - Degree of cracking (Reconfirmed 2013)
AS 1580.603.1-1992 Paints and related materials - Methods of test Finish
AS/NZS 1580.104.1:2000 Paints and related materials - Methods of test Recommended materials for test panels (Reconfirmed 2013)
AS 1580.202.1-1980 Paints and related materials - Methods of test Density
AS/NZS 1580.205.2:1997 Paints and related materials - Methods of test Application properties - Conventional spraying (Reconfirmed 2013)
AS/NZS 1580.204.1:1998 Paints and related materials - Methods of test Fineness of grind (Reconfirmed 2013)
AS 1580.401.5-2002 Paints and related materials - Methods of test Hard dry condition - Sanding test
AS 1580.301.2-1990 Paints and related materials - Methods of test Non-volatile content by volume (volume solids) (Reconfirmed 2013)
AS 1627.2-1989 Metal finishing - Preparation and pretreatment of surfaces - Power tool cleaning
AS 1580.457.1-1988 Paints and related materials - Methods of test Resistance to natural weathering
AS/NZS 2312:2002 Guide to the protection of structural steel against atmospheric corrosion by the use of protective coatings
AS/NZS 1580.214.4:1996 Paints and related materials - Methods of test Consistency - Rotothinner (Reconfirmed 2013)
AS/NZS 1580.214.1:1997 Paints and related materials - Methods of test Consistency - Stormer viscometer (Reconfirmed 2013)
AS 1580.214.1-1990 Paints and related materials - Methods of test - Consistency - Stormer viscometer
AS 1580.481.1.6-1991 Paints and related materials - Methods of test Coatings - Exposed to weathering - Degree of erosion
AS 1580.401.5-1993 Paints and related materials - Methods of test Hard dry condition - Sanding test
AS 1580.214.3-2003 Paints and related materials - Methods of test Viscosity - Cone-and-plate
AS 1580.403.1-1981 Paints and related materials - Methods of test Scratch resistance
AS 1580.481.3-2002 Paints and related materials - Methods of test Coatings - Exposed to weathering - Degree of corrosion of coated metal substrates (Reconfirmed 2013)
AS 1580.203.1-2004 Paints and related materials - Methods of test Skin formation
AS 1580.408.4-2004 Paints and related materials - Methods of test Adhesion (crosscut) (Reconfirmed 2019)
AS 1580.103.1-1980 Paints and related materials - Methods of test Preliminary examination and preparation for testing
AS 2905-2005 Steel drums
AS 1580.211.1-1980 Paints and related materials - Methods of test Degree of settling
AS 1580.481.1.9-1991 Paints and related materials - Methods of test Coatings - Exposed to weathering - Degree of blistering
AS/NZS 1580.205.1:1997 Paints and related materials - Methods of test Application properties - Brushing (Reconfirmed 2013)
AS 1580.105.1-1992 Paints and related materials - Methods of test Pretreatment of metal test panels - Solvent cleaning
AS/NZS 1580.205.4:1998 Paints and related materials - Methods of test Application properties - Airless spraying (Reconfirmed 2013)
AS 1580.481.3-1992 Paints and related materials - Methods of test Coatings - Exposed to weathering - Degree of corrosion of coated metal substrates
AS 1580.205.4-1981 Paints and related materials - Methods of test Application properties - Airless spraying
AS 1580.205.2-1981 Paints and related materials - Methods of test Application properties - Conventional air spraying
AS/NZS 1580.211.1:1995 Paints and related materials - Methods of test Degree of settling (Reconfirmed 2013)
AS 1580.101.5-1986 Paints and related materials - Methods of test Conditions of test, temperature and humidity controlled
AS/NZS 1580.103.1:1995 Paints and related materials Methods of test - Examination and preparation of samples for testing (Reconfirmed 2013)
AS 1580.481.1.7-1991 Paints and related materials - Methods of test Coatings - Exposed to weathering - Degree of checking

AS/NZS 3750.12:1996 Paints for steel structures Alkyd/micaceous iron oxide (Reconfirmed 2013)

View more information
US$34.12
Excluding Tax where applicable

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.