AS/NZS 2455.2:1996

1 - AS/ NZS 2455.2:1996 TEXTILE FLOOR COVERINGS - INSTALLATION PRACTICE - CARPET TILES
4 - PREFACE
4 - CONTENTS
5 - 1 SCOPE
5 - 2 OBJECTIVE
5 - 3 REFERENCED DOCUMENTS
5 - 4 DEFINITIONS
5 - 4.1 Cable trunking
5 - 4.2 Grid and perimeter adhesion system
5 - 4.3 Permanent bond system
5 - 4.4 Pressure-sensitive system
5 - 5 PRE-LAYING REQUIREMENTS
5 - 5.1 General
6 - 5.2 Double-bond system
6 - 5.3 Subfloor preparation
6 - 5.4 Access panel floors
6 - 6 SETTING UP
6 - 6.1 General
6 - 6.2 Procedure
7 - 6.3 Additional requirements for the double-bond system
7 - 7 APPLICATION OF PRIMER AND ADHESIVE
7 - 7.1 Procedure for grid and perimeter adhesion system
8 - 7.2 Procedure for direct-stick system
8 - 7.3 Procedure for double-bond system
8 - 8 FITMENT OF THE CARPET TILES
8 - 9 CUTTING AND INSTALLATION OF PERIMETER CARPET TILES
9 - 10 COMPLETION OF INSTALLATION

Sets out requirements for three recognized systems for the installation of carpet tiles. It is to be read in conjunction with AS/NZS 2455.1:1995.

This Standard sets out requirements for installing carpet tiles by the grid and perimeter adhesion system, the double-bond system and the direct-stick system which includes the permanent bond system.NOTE: It is recognized that not all carpet tiles will be able to be installed in accordance with this Standard. Manufacturers' instructions may vary from these requirements and where this occurs, the manufacturer's instructions should be followed.

First published as AS/NZS 2455.2:1996.