• There are no items in your cart

AS/NZS 2638.2:2011

Current

Current

The latest, up-to-date edition.

Gate valves for waterworks purposes Resilient seated (Reconfirmed 2022)

Available format(s)

Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users

Published date

05-27-2011

Preview

Specifies requirements for PN 16 and PN 25 metal-bodied resilient-seated gate valves for waterworks purposes.

This Standard specifies requirements for PN 16 and PN 25 metal-bodied resilient-seated gate valves for waterworks purposes, with a maximum operating temperature of 40°C. This Standard is applicable to the following versions: Valves of nominal sizes DN 80 to DN 750 with inside screw and non-rising spindle design, operated by a removable key, with or without a gearbox, for buried applications.Valves of nominal size DN 80 to DN 750 with inside screw and non-rising spindle design, operated by a handwheel, with or without a gearbox, for above-ground applications.Valves of nominal size DN 80 to DN 300 with outside screw and rising spindle design, operated by a handwheel, for above-ground applications where the position of the gate is required to be visible.Valves of nominal sizes DN 450 to DN 750 with an integral bypass arrangement.The design criteria of the valve and fasteners should be based on a minimum life expectancy of 50 years.Purchasing guidelines are given in Appendix B.

Committee
WS-022
DocumentType
Standard
ISBN
978 0 7337 9868 9
Pages
34
PublisherName
Standards Australia
Status
Current
Supersedes
UnderRevision

First published as AS 2638-1983.Revised and redesignated as Int 88006-1988.Int 88006-1988 withdrawn 1988.AS 2638-1983 revised 1988.Third edition 1991.AS 2638-1991 ervised and redesignated in part as AS 2638.2-1999.Second edition 2002.Third Edition 2006.AS 2638.2-2006 revised and redesignated as AS/NZS 2638.2:2011. Originated as AS 2638-1983. Third edition 1991. AS 2638-1991 revised and redesignated in part as AS 2638.2-1999. Third edition 2006. AS 2638.2-2006 revised and redesignated as AS/NZS 2638.2:2011. Reissued incorporating Amendment No. 1 (August 2017).

AS/NZS 1567:1997 Copper and copper alloys - Wrought rods, bars and sections (Reconfirmed 2021)
AS 3894.12-2002 Site testing of protective coatings Inspection report - Coating (Reconfirmed 2019)
AS/NZS 4020:2005 Testing of products for use in contact with drinking water
AS 2317-1998 Collared eyebolts
AS 4087-2004 Metallic flanges for waterworks purposes
AS 3894.1-2002 Site testing of protective coatings Non-conductive coatings - Continuity testing - High voltage (brush) method (Reconfirmed 2013)
AS/NZS 1568:1998 Copper and copper alloys - Forging stock and forgings
AS/NZS 1594:2002 Hot-rolled steel flat products (Reconfirmed 2016)
AS 681.1-2008 Elastomeric seals - Material requirements for pipe joint seals used in water and drainage applications Vulcanized rubber
AS/NZS 4158:2003 Thermal-bonded polymeric coatings on valves and fittings for water industry purposes (Reconfirmed 2015)
AS 1111.1-2000 ISO metric hexagon bolts and screws - Product grade C - Bolts
AS 1646-2007 Elastomeric seals for waterworks purposes (Reconfirmed 2018)
AS 3894.10-2002 Site testing of protective coatings Inspection report - Daily surface and ambient conditions (Reconfirmed 2019)
AS 1111.2-2000 ISO metric hexagon bolts and screws - Product grade C - Screws
AS 1683.15.1-2000 Methods of test for elastomers International rubber hardness (Reconfirmed 2018)
AS 1545-1976 Methods for the calibration and grading of extensometers (Reconfirmed 2017)
AS 3894.14-2002 Site testing of protective coatings Inspection report - Daily painting (Reconfirmed 2019)
AS 3894.13-2002 Site testing of protective coatings Inspection report - Daily (Reconfirmed 2019)
AS 1442-2007 Carbon steels and carbon-manganese steels - Hot rolled bars and semifinished products (Reconfirmed 2017)
AS/NZS 2280:2004 Ductile iron pipes and fittings
AS 1831-2007 Ductile cast iron (Reconfirmed 2017)
AS 3894.11-2002 Site testing of protective coatings Equipment report (Reconfirmed 2019)
AS 60529-2004 Degrees of protection provided by enclosures (IP Code) (Reconfirmed 2018)

AS 2419.1:2017 Fire hydrant installations System design, installation and commissioning
AS/NZS 3500.3:2018 Plumbing and drainage Stormwater drainage
AS 3996:2019 Access covers and grates
AS/NZS 3500.3:2015 Plumbing and drainage Stormwater drainage

View more information
US$80.73
Excluding Tax where applicable

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.