AS/NZS 3750.9:1994
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Paints for steel structures - Organic zinc-rich primer
Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users
06-30-2017
English
01-01-1994
Provides requirements for organic zinc-rich priming paint intended for use on iron and steel to provide protection against atmospheric corrosion.
Committee |
CH-003
|
DocumentType |
Standard
|
ISBN |
0 7262 9357 1
|
Pages |
16
|
PublisherName |
Standards Australia
|
Status |
Superseded
|
SupersededBy | |
Supersedes | |
UnderRevision |
This Standard specifies requirements for an organic zinc-rich primer intended to protect iron and steel against atmospheric corrosion. It is suitable for application by brush, roller or spray. Type 2 paint specified in the Standard is referred to in AS 2312 as Paint Reference No. 2.NOTES:1 This paint may be used as detailed for systems MP1-B, MP2-C, MP2-D, MP5-E, MP5-F, MP5-G, MP5-H, MP9-B, MP10-B, LP1-E, LP1-F, LP1-G, LP1-H, LP2-D, LP2-E and LP2-F in AS 2312.Appendix A contains recommendations and advice on information which should be provided by the purchaser at the time of enquiry or order. Additional information on the use and application of organic zinc-rich primer is provided in Appendix B. Alternative methods for determining compliance with this Standard are contained in Appendix C.
First published as AS 2204-1978.
Jointly revised and redesignated as Joint Standard AS/NZS 3750.9:1994.
AS 1580.205.1-1981 | Paints and related materials - Methods of test Application properties - Brushing |
AS 1580.603.1-2002 | Paints and related materials - Methods of test Finish - General appearance (Reconfirmed 2013) |
AS 3904.1-1987 | Quality management and quality system elements Guidelines |
AS 1627.4-1989 | Metal finishing - Preparation and pretreatment of sufaces - Abrasive blast cleaning |
AS 1580.103.1-1980 | Paints and related materials - Methods of test Preliminary examination and preparation for testing |
AS 1152-1993 | Specification for test sieves |
AS/NZS 1580.481.1.8:1998 | Paints and related materials - Methods of test Coatings - Exposed to weathering - Degree of cracking (Reconfirmed 2013) |
AS 1580.603.1-1992 | Paints and related materials - Methods of test Finish |
AS 3900.1-1987 | Quality management and quality assurance Standards Guidelines for selection and use |
AS/NZS 1580.104.1:2000 | Paints and related materials - Methods of test Recommended materials for test panels (Reconfirmed 2013) |
AS 2310-1980 | Glossary of paint and painting terms |
AS 1580.481.1.10-1991 | Paints and related materials - Methods of test Coatings - Exposed to weathering - Degree of flaking and peeling |
AS 1580.101.1-1986 | Paints and related materials - Methods of test Air drying conditions |
AS/NZS 1580.481.1.9:1998 | Paints and related materials - Methods of test Coatings - Exposed to weathering - Degree of blistering (Reconfirmed 2013) |
AS/NZS 1580.601.1:1995 | Paints and related materials - Methods of test Colour - Visual comparison (Reconfirmed 2013) |
AS 2105-1992 | Inorganic zinc silicate paint |
AS 2854-2004 | Tinplate cans for general use |
AS/NZS 1580.205.3:1997 | Paints and related materials - Methods of test Application properties - Roller coating (Reconfirmed 2013) |
AS/NZS 1580.101.1:1999 | Paints and related materials - Methods of test Conditions of test - Temperature, humidity and airflow control (Reconfirmed 2013) |
AS 1580.205.4-1981 | Paints and related materials - Methods of test Application properties - Airless spraying |
AS 1580.404.1-1981 | Paints and related materials - Methods of test Recoating properties |
HB 18.44-1991 | Guidelines for third-party certification and accreditation - Guide 44: General rules for ISO or IEC international third-party certification schemes for products |
AS 1580.481.3-1992 | Paints and related materials - Methods of test Coatings - Exposed to weathering - Degree of corrosion of coated metal substrates |
AS 1580.205.3-1981 | Paints and related materials - Methods of test Application properties - Roller coating |
AS 1580.481.3-2002 | Paints and related materials - Methods of test Coatings - Exposed to weathering - Degree of corrosion of coated metal substrates (Reconfirmed 2013) |
AS 1580.481.1.8-1991 | Paints and related materials - Methods of test Coatings - Exposed to weathering - Degree of cracking |
AS 1627.4-2005 | Metal finishing - Preparation and pretreatment of surfaces Abrasive blast cleaning of steel (Reconfirmed 2017) |
AS/NZS 2312:2002 | Guide to the protection of structural steel against atmospheric corrosion by the use of protective coatings |
AS 2854-1986 | Tinplate cans for general use |
AS 1199-1988 | Sampling procedures and tables for inspection by attributes |
AS/NZS 1580.401.1:1999 | Paints and related materials - Methods of test Surface dry condition (Reconfirmed 2013) |
AS 1580.205.2-1981 | Paints and related materials - Methods of test Application properties - Conventional air spraying |
AS/NZS 1580.211.1:1995 | Paints and related materials - Methods of test Degree of settling (Reconfirmed 2013) |
AS 1580.401.1-1981 | Paints and related materials - Methods of test Surface dry condition |
AS/NZS 1580.205.1:1997 | Paints and related materials - Methods of test Application properties - Brushing (Reconfirmed 2013) |
AS/NZS 2310:2002 | Glossary of paint and painting terms (Reconfirmed 2016) |
AS/NZS 1580.211.2:1995 | Paints and related materials - Methods of test Ease of manual re-incorporation (Reconfirmed 2013) |
AS 2905-2005 | Steel drums |
AS 1580.211.1-1980 | Paints and related materials - Methods of test Degree of settling |
AS 1580.481.1.9-1991 | Paints and related materials - Methods of test Coatings - Exposed to weathering - Degree of blistering |
AS 1580.101.5-1986 | Paints and related materials - Methods of test Conditions of test, temperature and humidity controlled |
AS/NZS 1580.481.1.10:1998 | Paints and related materials - Methods of test Coatings - Exposed to weathering - Degree of flaking and peeling (Reconfirmed 2013) |
AS/NZS 1580.205.2:1997 | Paints and related materials - Methods of test Application properties - Conventional spraying (Reconfirmed 2013) |
AS 1580.401.5-2002 | Paints and related materials - Methods of test Hard dry condition - Sanding test |
AS 1580.481.1.7-1991 | Paints and related materials - Methods of test Coatings - Exposed to weathering - Degree of checking |
AS 1580.401.5-1993 | Paints and related materials - Methods of test Hard dry condition - Sanding test |
AS 1580.301.2-1990 | Paints and related materials - Methods of test Non-volatile content by volume (volume solids) (Reconfirmed 2013) |
AS 1580.457.1-1988 | Paints and related materials - Methods of test Resistance to natural weathering |
AS/NZS 1580.101.5:1999 | Paints and related materials - Methods of test Conditions of test - Temperature and humidity control (Reconfirmed 2013) |
AS/NZS 1580.205.4:1998 | Paints and related materials - Methods of test Application properties - Airless spraying (Reconfirmed 2013) |
AS/NZS 1580.103.1:1995 | Paints and related materials Methods of test - Examination and preparation of samples for testing (Reconfirmed 2013) |
AS 2905-1986 | Steel drums |
AS 1580.104.1-1992 | Paints and related materials - Methods of test Recommended materials for test panels |
AS 1580.601.1-1975 | Paints and related materials - Methods of test Colour - Visual comparison |
AS/NZS 1580.404.1:1997 | Paints and related materials - Methods of test Recoating properties (Reconfirmed 2013) |
AS 2312-1984 | Guide to the protection of iron and steel against exterior atmospheric corrosion |
AS/NZS 1580.457.1:1996 | Paints and related materials - Methods of test Resistance to natural weathering (Reconfirmed 2013) |
AS 1580.211.2-1980 | Paints and related materials - Methods of test Ease of manual re-incorporation |
AS/NZS 1580.481.1.7:1998 | Paints and related materials - Methods of test Coatings - Exposed to weathering - Degree of checking (Reconfirmed 2013) |
AS 1399-1990 | Guide to AS 1199 - Sampling procedures and tables for inspection by attributes |
AS 4145.2-2008 | Locksets and hardware for doors and windows Mechanical locksets for doors and windows in buildings |
AS 2470-2005 | Steel cylinders for compressed gases - Welded three-piece construction with longitudinal joint - 11 kg to 150 kg (Reconfirmed 2016) |
AS 2470-1995 | Steel cylinders for compressed gases - Welded - 11 kg to 150 kg |
AS 4751(INT)-2000 | Electrogalvanized (zinc) coatings on ferrous open sections |
AS 5039-2008 | Security screen doors and security window grilles |
AS 2469-1998 | Steel cylinders for compressed gases - Welded two-piece construction - 0.1 kg to 35 kg |
AS/NZS 4604:1999 | Security window grilles |
AS 4750(INT)-2000 | Electrogalvanized (zinc) coatings on ferrous hollow sections |
AS/NZS 4792:1999 | Hot-dip galvanized (zinc) coatings on ferrous hollow sections, applied by a continuous or a specialized process |
AS/NZS 4791:2006 | Hot-dip galvanized (zinc) coatings on ferrous open sections, applied by an in-line process (Reconfirmed 2017) |
AS 3577-2006 | Steel cylinders for compressed gases - Welded - 150 kg to 500 kg |
AS/NZS 4791:1999 | Hot-dip galvanized (zinc) coatings on ferrous open sections, applied by an in-line process |
AS 5039-2003 | Security screen doors and security window grilles |
AS/NZS 2312:2002 | Guide to the protection of structural steel against atmospheric corrosion by the use of protective coatings |
AS/NZS 3750.14:1997 | Paints for steel structures High-build epoxy (two-pack) |
AS/NZS 3845:1999 | Road safety barrier systems |
AS/NZS 3750.12:1996 | Paints for steel structures Alkyd/micaceous iron oxide (Reconfirmed 2013) |
AS 1789-2003 | Electroplated zinc (electrogalvanized) coatings on ferrous articles (batch process) (Reconfirmed 2017) |
AS/NZS 4680:2006 | Hot-dip galvanized (zinc) coatings on fabricated ferrous articles (Reconfirmed 2017) |
AS/NZS 4792:2006 | Hot-dip galvanized (zinc) coatings on ferrous hollow sections, applied by a continuous or a specialized process (Reconfirmed 2017) |
AS/NZS 3750.16:1998 | Paints for steel structures Waterborne primer and paint for galvanized, zinc/aluminium alloy-coated and zinc-primed steel (Reconfirmed 2013) |
AS 4750-2003 | Electrogalvanized (zinc) coatings on ferrous hollow and open sections (Reconfirmed 2017) |
AS 2469-2005 | Steel cylinders for compressed gases - Welded two-piece construction - 0.1 kg to 150 kg |
AS/NZS 2785:2000 | Suspended ceilings - Design and installation |
AS 4145.3-2001 | Locksets Mechanical locksets for windows in buildings (Reconfirmed 2018) |
AS/NZS 4680:1999 | Hot-dip galvanized (zinc) coatings on fabricated ferrous articles |
AS/NZS 2041:1998 | Buried corrugated metal structures |
AS 2470-1998 | Steel cylinders for compressed gases - Welded three-piece construction with longitudinal joint - 11 kg to 150 kg |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.